diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2017-05-09 09:54:39 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2017-05-09 09:54:39 -0700 |
| commit | 85d604902eb28eaea4f9e0f3a655ae986fa4bd2e (patch) | |
| tree | 3ca4ff0c7e13c09ad006f378fac066790586f391 | |
| parent | 8d648aad05811ccc07df22834de60a7bf8d9e0e6 (diff) | |
| parent | b9f34da74e1c4b5f2574333277cd8d8f53bad056 (diff) | |
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM Device-tree updates from Olof Johansson:
"Device-tree continues to see lots of updates. The majority of patches
here are smaller changes for new hardware on existing platforms, and
there are a few larger changes worth pointing out.
Major new platforms:
- Gemini has been ported to DT, so a handful of "new" platforms moved
over from board files
- Rockchip RK3288 support for Tinkerboard and Phytec phyCORE-RK3288
SoM and RDK
- A bunch of embedded platforms, several Linksys platforms, Synology
DS116,
- Motorola Droid4 (really old OMAP-based phone) support is added.
Some refactorings, i.e. Allwinner H3/H5 support is commonalized.
And lots of smaller changes, cleanups, etc. See shortlog for more
description
We're adding ability to cross-include DT files between arm and arm64,
by creating appropriate links in the dt-include directory, and using
arm/ and arm64/ as include prefixes. This will avoid other local hacks
such as per-file links between the two arch trees (this broke for
external mirroring of DT contents). Now they can just provide their
own appropriate dt-include hierarcy per platform"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (349 commits)
ARM: dts: exynos: Use - instead of @ for DT OPP entries
arm: spear6xx: add DT description of the ADC on SPEAr600
arm: spear6xx: remove unneeded pinctrl properties in spear600-evb
arm: spear6xx: switch spear600-evb to the new flash partition DT binding
arm: spear6xx: fix spaces in spear600-evb.dts
arm: spear6xx: use node labels in spear600-evb.dts
arm: spear6xx: add labels to various nodes in spear600.dtsi
ARM: dts: vexpress: fix few unit address format warnings
ARM: dts: at91: sama5d3_xplained: not all ADC channels are available
ARM: dts: at91: sama5d3_xplained: fix ADC vref
ARM: dts: at91: add envelope detector mux to the Axentia TSE-850
ARM: dts: armada-38x: label USB and SATA nodes
ARM: dts: imx6q-utilite-pro: add hpd gpio
ARM: dts: imx6qp-sabresd: Set reg_arm regulator supply
ARM: dts: imx6qdl-sabresd: Set LDO regulator supply
ARM: dts: imx: add Gateworks Ventana GW5903 support
ARM: dts: i.MX25: add AIPS control registers
ARM: dts: imx7-colibri: add Carrier Board 3.3V/5V regulators
ARM: dts: imx7-colibri: remove 1.8V fixed regulator
ARM: dts: imx7-colibri: allow to disable Ethernet rail
...
378 files changed, 13121 insertions, 2800 deletions
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt index 29737b9b616e..799af90dd75b 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.txt +++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt @@ -217,7 +217,8 @@ memory, bridge implementations, processor and other functionality not controlled elsewhere. required properties: -- compatible: Should be "atmel,<chip>-sfr", "syscon". +- compatible: Should be "atmel,<chip>-sfr", "syscon" or + "atmel,<chip>-sfrbu", "syscon" <chip> can be "sama5d3", "sama5d4" or "sama5d2". - reg: Should contain registers location and length diff --git a/Documentation/devicetree/bindings/arm/gemini.txt b/Documentation/devicetree/bindings/arm/gemini.txt new file mode 100644 index 000000000000..0041eb031116 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/gemini.txt @@ -0,0 +1,86 @@ +Cortina systems Gemini platforms + +The Gemini SoC is the project name for an ARMv4 FA525-based SoC originally +produced by Storlink Semiconductor around 2005. The company was renamed +later renamed Storm Semiconductor. The chip product name is Storlink SL3516. +It was derived from earlier products from Storm named SL3316 (Centroid) and +SL3512 (Bulverde). + +Storm Semiconductor was acquired by Cortina Systems in 2008 and the SoC was +produced and used for NAS and similar usecases. In 2014 Cortina Systems was +in turn acquired by Inphi, who seem to have discontinued this product family. + +Many of the IP blocks used in the SoC comes from Faraday Technology. + +Required properties (in root node): + compatible = "cortina,gemini"; + +Required nodes: + +- soc: the SoC should be represented by a simple bus encompassing all the + onchip devices, this is referred to as the soc bus node. + +- syscon: the soc bus node must have a system controller node pointing to the + global control registers, with the compatible string + "cortina,gemini-syscon", "syscon"; + +- timer: the soc bus node must have a timer node pointing to the SoC timer + block, with the compatible string "cortina,gemini-timer" + See: clocksource/cortina,gemini-timer.txt + +- interrupt-controller: the sob bus node must have an interrupt controller + node pointing to the SoC interrupt controller block, with the compatible + string "cortina,gemini-interrupt-controller" + See interrupt-controller/cortina,gemini-interrupt-controller.txt + +Example: + +/ { + model = "Foo Gemini Machine"; + compatible = "cortina,gemini"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + interrupt-parent = <&intcon>; + + syscon: syscon@40000000 { + compatible = "cortina,gemini-syscon", "syscon"; + reg = <0x40000000 0x1000>; + }; + + uart0: serial@42000000 { + compatible = "ns16550a"; + reg = <0x42000000 0x100>; + clock-frequency = <48000000>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + }; + + timer@43000000 { + compatible = "cortina,gemini-timer"; + reg = <0x43000000 0x1000>; + interrupt-parent = <&intcon>; + interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */ + <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */ + <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */ + syscon = <&syscon>; + }; + + intcon: interrupt-controller@48000000 { + compatible = "cortina,gemini-interrupt-controller"; + reg = <0x48000000 0x1000>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/arm/i2se.txt b/Documentation/devicetree/bindings/arm/i2se.txt new file mode 100644 index 000000000000..dbd54a3aa07d --- /dev/null +++ b/Documentation/devicetree/bindings/arm/i2se.txt @@ -0,0 +1,22 @@ +I2SE Device Tree Bindings +------------------------- + +Duckbill Board +Required root node properties: + - compatible = "i2se,duckbill", "fsl,imx28"; + +Duckbill 2 Board +Required root node properties: + - compatible = "i2se,duckbill-2", "fsl,imx28"; + +Duckbill 2 485 Board +Required root node properties: + - compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28"; + +Duckbill 2 EnOcean Board +Required root node properties: + - compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28"; + +Duckbill 2 SPI Board +Required root node properties: + - compatible = "i2se,duckbill-2-spi", "i2se,duckbill-2", "fsl,imx28"; diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index cc4ace6397ab..6b8d50a0ee78 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -1,5 +1,8 @@ Rockchip platforms device tree bindings --------------------------------------- +- Asus Tinker board + Required root node properties: + - compatible = "asus,rk3288-tinker", "rockchip,rk3288"; - Kylin RK3036 board: Required root node properties: @@ -103,6 +106,10 @@ Rockchip platforms device tree bindings Required root node properties: - compatible = "mqmaker,miqi", "rockchip,rk3288"; +- Phytec phyCORE-RK3288: Rapid Development Kit + Required root node properties: + - compatible = "phytec,rk3288-pcm-947", "phytec,rk3288-phycore-som", "rockchip,rk3288"; + - Rockchip PX3 Evaluation board: Required root node properties: - compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188"; diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt index c9502634316d..170fe0562c63 100644 --- a/Documentation/devicetree/bindings/arm/shmobile.txt +++ b/Documentation/devicetree/bindings/arm/shmobile.txt @@ -13,8 +13,12 @@ SoCs: compatible = "renesas,r8a73a4" - R-Mobile A1 (R8A77400) compatible = "renesas,r8a7740" + - RZ/G1H (R8A77420) + compatible = "renesas,r8a7742" - RZ/G1M (R8A77430) compatible = "renesas,r8a7743" + - RZ/G1N (R8A77440) + compatible = "renesas,r8a7744" - RZ/G1E (R8A77450) compatible = "renesas,r8a7745" - R-Car M1A (R8A77781) diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-flowctrl.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-flowctrl.txt index ccf0adddc820..a855c1bffc0f 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-flowctrl.txt +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-flowctrl.txt @@ -1,7 +1,13 @@ NVIDIA Tegra Flow Controller Required properties: -- compatible: Should be "nvidia,tegra<chip>-flowctrl" +- compatible: Should contain one of the following: + - "nvidia,tegra20-flowctrl": for Tegra20 + - "nvidia,tegra30-flowctrl": for Tegra30 + - "nvidia,tegra114-flowctrl": for Tegra114 + - "nvidia,tegra124-flowctrl": for Tegra124 + - "nvidia,tegra132-flowctrl", "nvidia,tegra124-flowctrl": for Tegra132 + - "nvidia,tegra210-flowctrl": for Tegra210 - reg: Should contain one register range (address and length) Example: diff --git a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt index eb985a633d59..796c260c183d 100644 --- a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt +++ b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt @@ -31,6 +31,12 @@ The following is a list of provided IDs and clock names on Armada 39x: 4 = dclk (SDRAM Interface Clock) 5 = refclk (Reference Clock) +The following is a list of provided IDs and clock names on 98dx3236: + 0 = tclk (Internal Bus clock) + 1 = cpuclk (CPU clock) + 2 = ddrclk (DDR clock) + 3 = mpll (MPLL Clock) + The following is a list of provided IDs and clock names on Kirkwood and Dove: 0 = tclk (Internal Bus clock) 1 = cpuclk (CPU0 clock) @@ -49,6 +55,7 @@ Required properties: "marvell,armada-380-core-clock" - For Armada 380/385 SoC core clocks "marvell,armada-390-core-clock" - For Armada 39x SoC core clocks "marvell,armada-xp-core-clock" - For Armada XP SoC core clocks + "marvell,mv98dx3236-core-clock" - For 98dx3236 family SoC core clocks "marvell,dove-core-clock" - for Dove SoC core clocks "marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180) "marvell,mv88f6180-core-clock" - for Kirkwood MV88f6180 SoC diff --git a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt index 5142efc8099d..de562da2ae77 100644 --- a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt +++ b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt @@ -119,6 +119,16 @@ ID Clock Peripheral 29 sata1lnk 30 sata1 SATA Host 1 +The following is a list of provided IDs for 98dx3236: +ID Clock Peripheral +----------------------------------- +3 ge1 Gigabit Ethernet 1 +4 ge0 Gigabit Ethernet 0 +5 pex0 PCIe Cntrl 0 +17 sdio SDHCI Host +18 usb0 USB Host 0 +22 xor0 XOR DMA 0 + The following is a list of provided IDs for Dove: ID Clock Peripheral ----------------------------------- @@ -169,6 +179,7 @@ Required properties: "marvell,armada-380-gating-clock" - for Armada 380/385 SoC clock gating "marvell,armada-390-gating-clock" - for Armada 39x SoC clock gating "marvell,armada-xp-gating-clock" - for Armada XP SoC clock gating + "marvell,mv98dx3236-gating-clock" - for 98dx3236 SoC clock gating "marvell,dove-gating-clock" - for Dove SoC clock gating "marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating - reg : shall be the register address of the Clock Gating Control register diff --git a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt index d085ef90d27c..f8e946471a58 100644 --- a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt +++ b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt @@ -202,23 +202,23 @@ Example2 : compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; opp-microvolt = <800000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <800000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <800000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <825000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <875000>; }; @@ -292,23 +292,23 @@ Example2 : compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; opp-microvolt = <900000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; opp-microvolt = <900000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <1000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <1000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <1000000>; }; @@ -318,19 +318,19 @@ Example2 : compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; }; }; @@ -339,19 +339,19 @@ Example2 : compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; }; }; @@ -360,13 +360,13 @@ Example2 : compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; }; diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt index b82c00449468..57a8d0610062 100644 --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt @@ -94,6 +94,7 @@ Required properties: * allwinner,sun6i-a31-display-backend * allwinner,sun8i-a33-display-backend - reg: base address and size of the memory-mapped region. + - interrupts: interrupt associated to this IP - clocks: phandles to the clocks feeding the frontend and backend * ahb: the backend interface clock * mod: the backend module clock @@ -265,6 +266,7 @@ fe0: display-frontend@1e00000 { be0: display-backend@1e60000 { compatible = "allwinner,sun5i-a13-display-backend"; reg = <0x01e60000 0x10000>; + interrupts = <47>; clocks = <&ahb_gates 44>, <&de_be_clk>, <&dram_gates 26>; clock-names = "ahb", "mod", diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt index 476f5ea6c627..2b6243e730f6 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt @@ -35,6 +35,14 @@ Optional properties: - interrupt-names and interrupts: * pmu: Power Management Unit interrupt, if implemented in hardware + - memory-region: + Memory region to allocate from, as defined in + Documentation/devicetree/bindi/reserved-memory/reserved-memory.txt + + - operating-points-v2: + Operating Points for the GPU, as defined in + Documentation/devicetree/bindings/opp/opp.txt + Vendor-specific bindings ------------------------ diff --git a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt index ff3db65e50de..b7e4c7444510 100644 --- a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt +++ b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt @@ -5,6 +5,7 @@ Required properties: Currently recognized values: - nvidia,gk20a - nvidia,gm20b + - nvidia,gp10b - reg: Physical base address and length of the controller's registers. Must contain two entries: - first entry for bar0 @@ -14,7 +15,8 @@ Required properties: - interrupt-names: Must include the following entries: - stall - nonstall -- vdd-supply: regulator for supply voltage. +- vdd-supply: regulator for supply voltage. Only required for GPUs not using + power domains. - clocks: Must contain an entry for each entry in clock-names. See ../clocks/clock-bindings.txt for details. - clock-names: Must include the following entries: @@ -27,6 +29,8 @@ is also required: See ../reset/reset.txt for details. - reset-names: Must include the following entries: - gpu +- power-domains: GPUs that make use of power domains can define this property + instead of vdd-supply. Currently "nvidia,gp10b" makes use of this. Optional properties: - iommus: A reference to the IOMMU. See ../iommu/iommu.txt for details. @@ -68,3 +72,22 @@ Example for GM20B: iommus = <&mc TEGRA_SWGROUP_GPU>; status = "disabled"; }; + +Example for GP10B: + + gpu@17000000 { + compatible = "nvidia,gp10b"; + reg = <0x0 0x17000000 0x0 0x1000000>, + <0x0 0x18000000 0x0 0x1000000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "stall", "nonstall"; + clocks = <&bpmp TEGRA186_CLK_GPCCLK>, + <&bpmp TEGRA186_CLK_GPU>; + clock-names = "gpu", "pwr"; + resets = <&bpmp TEGRA186_RESET_GPU>; + reset-names = "gpu"; + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_GPU>; + iommus = <&smmu TEGRA186_SID_GPU>; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt index 3e920ec5c4d3..9ce35af8507c 100644 --- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt +++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt @@ -40,6 +40,7 @@ Required properties: w25x80 w25x32 w25q32 + w25q64 w25q32dw w25q80bl w25q128 diff --git a/Documentation/devicetree/bindings/net/marvell,prestera.txt b/Documentation/devicetree/bindings/net/marvell,prestera.txt index 5fbab29718e8..c329608fa887 100644 --- a/Documentation/devicetree/bindings/net/marvell,prestera.txt +++ b/Documentation/devicetree/bindings/net/marvell,prestera.txt @@ -32,19 +32,16 @@ DFX Server bindings ------------------- Required properties: -- compatible: must be "marvell,dfx-server" +- compatible: must be "marvell,dfx-server", "simple-bus" +- ranges: describes the address mapping of a memory-mapped bus. - reg: address and length of the register set for the device. Example: -dfx-registers { - compatible = "simple-bus"; +dfx-server { + compatible = "marvell,dfx-server", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>; - - dfx: dfx@0 { - compatible = "marvell,dfx-server"; - reg = <0 0x100000>; - }; + reg = <MBUS_ID(0x08, 0x00) 0 0x100000>; }; diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt index 6c7c2bce6d0c..00bea038639e 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.txt +++ b/Documentation/devicetree/bindings/usb/dwc2.txt @@ -14,6 +14,10 @@ Required properties: - "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs; - "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs; - snps,dwc2: A generic DWC2 USB controller with default parameters. + - "st,stm32f4x9-fsotg": The DWC2 USB FS/HS controller instance in STM32F4x9 SoCs + configured in FS mode; + - "st,stm32f4x9-hsotg": The DWC2 USB HS controller instance in STM32F4x9 SoCs + configured in HS mode; - reg : Should contain 1 register range (address and length) - interrupts : Should contain 1 interrupt - clocks: clock provider specifier diff --git a/Documentation/devicetree/bindings/watchdog/cortina,gemini-watchdog.txt b/Documentation/devicetree/bindings/watchdog/cortina,gemini-watchdog.txt new file mode 100644 index 000000000000..bc4b865d178b --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/cortina,gemini-watchdog.txt @@ -0,0 +1,17 @@ +Cortina Systems Gemini SoC Watchdog + +Required properties: +- compatible : must be "cortina,gemini-watchdog" +- reg : shall contain base register location and length +- interrupts : shall contain the interrupt for the watchdog + +Optional properties: +- timeout-sec : the default watchdog timeout in seconds. + +Example: + +watchdog@41000000 { + compatible = "cortina,gemini-watchdog"; + reg = <0x41000000 0x1000>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 011808490fed..9c5e1d944d1c 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -77,6 +77,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-asus-rt-ac56u.dtb \ bcm4708-asus-rt-ac68u.dtb \ bcm4708-buffalo-wzr-1750dhp.dtb \ + bcm4708-linksys-ea6300-v1.dtb \ bcm4708-luxul-xap-1510.dtb \ bcm4708-luxul-xwc-1000.dtb \ bcm4708-netgear-r6250.dtb \ @@ -87,17 +88,21 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm47081-buffalo-wzr-900dhp.dtb \ bcm47081-luxul-xap-1410.dtb \ bcm47081-luxul-xwr-1200.dtb \ + bcm47081-tplink-archer-c5-v2.dtb \ bcm4709-asus-rt-ac87u.dtb \ bcm4709-buffalo-wxr-1900dhp.dtb \ + bcm4709-linksys-ea9200.dtb \ bcm4709-netgear-r7000.dtb \ bcm4709-netgear-r8000.dtb \ bcm4709-tplink-archer-c9-v1.dtb \ bcm47094-dlink-dir-885l.dtb \ + bcm47094-linksys-panamera.dtb \ bcm47094-luxul-xwr-3100.dtb \ bcm47094-netgear-r8500.dtb \ bcm94708.dtb \ bcm94709.dtb \ bcm953012er.dtb \ + bcm953012hr.dtb \ bcm953012k.dtb dtb-$(CONFIG_ARCH_BCM_53573) += \ bcm47189-tenda-ac9.dtb @@ -173,6 +178,12 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5440-sd5v1.dtb \ exynos5440-ssdk5440.dtb \ exynos5800-peach-pi.dtb +dtb-$(CONFIG_ARCH_GEMINI) += \ + gemini-nas4220b.dtb \ + gemini-rut1xx.dtb \ + gemini-sq201.dtb \ + gemini-wbd111.dtb \ + gemini-wbd222.dtb dtb-$(CONFIG_ARCH_HI3xxx) += \ hi3620-hi4511.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += \ @@ -352,6 +363,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-gw551x.dtb \ imx6dl-gw552x.dtb \ imx6dl-gw553x.dtb \ + imx6dl-gw5903.dtb \ + imx6dl-gw5904.dtb \ imx6dl-hummingboard.dtb \ imx6dl-icore.dtb \ imx6dl-icore-rqs.dtb \ @@ -395,9 +408,13 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-gw551x.dtb \ imx6q-gw552x.dtb \ imx6q-gw553x.dtb \ + imx6q-gw5903.dtb \ + imx6q-gw5904.dtb \ imx6q-h100.dtb \ imx6q-hummingboard.dtb \ imx6q-icore.dtb \ + imx6q-icore-ofcap10.dtb \ + imx6q-icore-ofcap12.dtb \ imx6q-icore-rqs.dtb \ imx6q-marsboard.dtb \ imx6q-mccmon6.dtb \ @@ -425,9 +442,12 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-utilite-pro.dtb \ imx6q-wandboard.dtb \ imx6q-wandboard-revb1.dtb \ + imx6q-zii-rdu2.dtb \ imx6qp-nitrogen6_max.dtb \ + imx6qp-nitrogen6_som2.dtb \ imx6qp-sabreauto.dtb \ - imx6qp-sabresd.dtb + imx6qp-sabresd.dtb \ + imx6qp-zii-rdu2.dtb dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-evk.dtb \ imx6sl-warp.dtb @@ -458,6 +478,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-nitrogen7.dtb \ imx7d-sbc-imx7.dtb \ imx7d-sdb.dtb \ + imx7d-sdb-sht11.dtb \ imx7s-colibri-eval-v3.dtb \ imx7s-warp.dtb dtb-$(CONFIG_SOC_LS1021A) += \ @@ -488,6 +509,10 @@ dtb-$(CONFIG_ARCH_MXS) += \ imx28-cfa10056.dtb \ imx28-cfa10057.dtb \ imx28-cfa10058.dtb \ + imx28-duckbill-2-485.dtb \ + imx28-duckbill-2.dtb \ + imx28-duckbill-2-enocean.dtb \ + imx28-duckbill-2-spi.dtb \ imx28-duckbill.dtb \ imx28-eukrea-mbmx283lc.dtb \ imx28-eukrea-mbmx287lc.dtb \ @@ -673,6 +698,25 @@ dtb-$(CONFIG_ARCH_REALVIEW) += \ arm-realview-eb-a9mp-bbrevd.dtb \ arm-realview-pba8.dtb \ arm-realview-pbx-a9.dtb +dtb-$(CONFIG_ARCH_RENESAS) += \ + emev2-kzm9d.dtb \ + r7s72100-genmai.dtb \ + r7s72100-rskrza1.dtb \ + r8a73a4-ape6evm.dtb \ + r8a7740-armadillo800eva.dtb \ + r8a7743-sk-rzg1m.dtb \ + r8a7745-sk-rzg1e.dtb \ + r8a7778-bockw.dtb \ + r8a7779-marzen.dtb \ + r8a7790-lager.dtb \ + r8a7791-koelsch.dtb \ + r8a7791-porter.dtb \ + r8a7792-blanche.dtb \ + r8a7792-wheat.dtb \ + r8a7793-gose.dtb \ + r8a7794-alt.dtb \ + r8a7794-silk.dtb \ + sh73a0-kzm9g.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk1108-evb.dtb \ rk3036-evb.dtb \ @@ -692,9 +736,11 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-firefly.dtb \ rk3288-firefly-reload.dtb \ rk3288-miqi.dtb \ + rk3288-phycore-rdk.dtb \ rk3288-popmetal.dtb \ rk3288-r89.dtb \ rk3288-rock2-square.dtb \ + rk3288-tinker.dtb \ rk3288-veyron-brain.dtb \ rk3288-veyron-jaq.dtb \ rk3288-veyron-jerry.dtb \ @@ -713,25 +759,6 @@ dtb-$(CONFIG_ARCH_S5PV210) += \ s5pv210-smdkc110.dtb \ s5pv210-smdkv210.dtb \ s5pv210-torbreck.dtb -dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ - emev2-kzm9d.dtb \ - r7s72100-genmai.dtb \ - r7s72100-rskrza1.dtb \ - r8a73a4-ape6evm.dtb \ - r8a7740-armadillo800eva.dtb \ - r8a7743-sk-rzg1m.dtb \ - r8a7745-sk-rzg1e.dtb \ - r8a7778-bockw.dtb \ - r8a7779-marzen.dtb \ - r8a7790-lager.dtb \ - r8a7791-koelsch.dtb \ - r8a7791-porter.dtb \ - r8a7792-blanche.dtb \ - r8a7792-wheat.dtb \ - r8a7793-gose.dtb \ - r8a7794-alt.dtb \ - r8a7794-silk.dtb \ - sh73a0-kzm9g.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += \ socfpga_arria5_socdk.dtb \ socfpga_arria10_socdk_nand.dtb \ @@ -764,7 +791,8 @@ dtb-$(CONFIG_ARCH_STM32)+= \ stm32f429-disco.dtb \ stm32f469-disco.dtb \ stm32429i-eval.dtb \ - stm32746g-eval.dtb + stm32746g-eval.dtb \ + stm32h743i-eval.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ sun4i-a10-ba10-tvbox.dtb \ @@ -868,6 +896,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-beelink-x2.dtb \ sun8i-h3-nanopi-m1.dtb \ sun8i-h3-nanopi-neo.dtb \ + sun8i-h3-nanopi-neo-air.dtb \ sun8i-h3-orangepi-2.dtb \ sun8i-h3-orangepi-lite.dtb \ sun8i-h3-orangepi-one.dtb \ @@ -970,6 +999,8 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \ armada-385-db-ap.dtb \ armada-385-linksys-caiman.dtb \ armada-385-linksys-cobra.dtb \ + armada-385-linksys-shelby.dtb \ + armada-385-synology-ds116.dtb \ armada-385-turris-omnia.dtb \ armada-388-clearfog.dtb \ armada-388-clearfog-base.dtb \ diff --git a/arch/arm/boot/dts/alpine.dtsi b/arch/arm/boot/dts/alpine.dtsi index d0eefc3b886c..731df7a8c4e6 100644 --- a/arch/arm/boot/dts/alpine.dtsi +++ b/arch/arm/boot/dts/alpine.dtsi @@ -41,28 +41,28 @@ compatible = "arm,cortex-a15"; device_type = "cpu"; reg = <0>; - clock-frequency = <0>; /* Filled by loader */ + clock-frequency = <1700000000>; }; cpu@1 { compatible = "arm,cortex-a15"; device_type = "cpu"; reg = <1>; - clock-frequency = <0>; /* Filled by loader */ + clock-frequency = <1700000000>; }; cpu@2 { compatible = "arm,cortex-a15"; device_type = "cpu"; reg = <2>; - clock-frequency = <0>; /* Filled by loader */ + clock-frequency = <1700000000>; }; cpu@3 { compatible = "arm,cortex-a15"; device_type = "cpu"; reg = <3>; - clock-frequency = <0>; /* Filled by loader */ + clock-frequency = <1700000000>; }; }; @@ -81,7 +81,7 @@ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - clock-frequency = <0>; /* Filled by loader */ + clock-frequency = <50000000>; }; /* Interrupt Controller */ @@ -120,26 +120,26 @@ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; }; - uart0:uart@fd883000 { + uart0: uart@fd883000 { compatible = "ns16550a"; reg = <0x0 0xfd883000 0x0 0x1000>; - clock-frequency = <0>; /* Filled by loader */ + clock-frequency = <375000000>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; }; - uart1:uart@0xfd884000 { + uart1: uart@fd884000 { compatible = "ns16550a"; reg = <0x0 0xfd884000 0x0 0x1000>; - clock-frequency = <0>; /* Filled by loader */ + clock-frequency = <375000000>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; }; /* Internal PCIe Controller */ - pcie-internal@0xfbc00000 { + pcie@fbc00000 { compatible = "pci-host-ecam-generic"; device_type = "pci"; #size-cells = <2>; diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts index 501c7527121b..75de1e723303 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir2110.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir2110.dts @@ -14,6 +14,7 @@ /dts-v1/; #include "am335x-baltos.dtsi" +#include "am335x-baltos-leds.dtsi" / { model = "OnRISC Baltos iR 2110"; diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts index 19f53b8569e1..46df1b22022c 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts @@ -14,6 +14,7 @@ /dts-v1/; #include "am335x-baltos.dtsi" +#include "am335x-baltos-leds.dtsi" / { model = "OnRISC Baltos iR 3220"; diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts index 2b9d7f4db23f..5d56355ba040 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts @@ -14,6 +14,7 @@ /dts-v1/; #include "am335x-baltos.dtsi" +#include "am335x-baltos-leds.dtsi" / { model = "OnRISC Baltos iR 5221"; diff --git a/arch/arm/boot/dts/am335x-baltos-leds.dtsi b/arch/arm/boot/dts/am335x-baltos-leds.dtsi new file mode 100644 index 000000000000..3ab1767d5c13 --- /dev/null +++ b/arch/arm/boot/dts/am335x-baltos-leds.dtsi @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * VScom OnRISC + * http://www.vscom.de + */ + +/*#include "am33xx.dtsi"*/ + +/ { + leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds>; + + compatible = "gpio-leds"; + + power { + label = "onrisc:red:power"; + linux,default-trigger = "default-on"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + wlan { + label = "onrisc:blue:wlan"; + gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + app { + label = "onrisc:green:app"; + gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; +}; + +&am33xx_pinmux { + user_leds: pinmux_user_leds { + pinctrl-single,pins = < + AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mii1_col.gpio3_0 PWR LED */ + AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mii1_txd3.gpio0_16 WLAN LED */ + AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mii1_txd2.gpio0_17 APP LED */ + >; + }; +}; diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index 77273df1a028..935ed17d22e4 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -15,3 +15,14 @@ model = "TI AM335x BeagleBone Black"; compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; }; + +&cpu0_opp_table { + /* + * All PG 2.0 silicon may not support 1GHz but some of the early + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed + * to support 1GHz OPP so enable it for PG 2.0 on this board. + */ + oppnitro@1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; +}; diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index a2ad076822db..f2005ecca74f 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -201,6 +201,69 @@ AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLUP | MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */ >; }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1, RMII mode */ + AM33XX_IOPAD(0x90c, (PIN_INPUT_PULLUP | MUX_MODE1)) /* mii1_crs.rmii1_crs_dv */ + AM33XX_IOPAD(0x944, (PIN_INPUT_PULLUP | MUX_MODE0)) /* rmii1_refclk.rmii1_refclk */ + AM33XX_IOPAD(0x940, (PIN_INPUT_PULLUP | MUX_MODE1)) /* mii1_rxd0.rmii1_rxd0 */ + AM33XX_IOPAD(0x93c, (PIN_INPUT_PULLUP | MUX_MODE1)) /* mii1_rxd1.rmii1_rxd1 */ + AM33XX_IOPAD(0x910, (PIN_INPUT_PULLUP | MUX_MODE1)) /* mii1_rxerr.rmii1_rxerr */ + AM33XX_IOPAD(0x928, (PIN_OUTPUT_PULLDOWN | MUX_MODE1)) /* mii1_txd0.rmii1_txd0 */ + AM33XX_IOPAD(0x924, (PIN_OUTPUT_PULLDOWN | MUX_MODE1)) /* mii1_txd1.rmii1_txd1 */ + AM33XX_IOPAD(0x914, (PIN_OUTPUT_PULLDOWN | MUX_MODE1)) /* mii1_txen.rmii1_txen */ + /* Slave 2, RMII mode */ + AM33XX_IOPAD(0x870, (PIN_INPUT_PULLUP | MUX_MODE3)) /* gpmc_wait0.rmii2_crs_dv */ + AM33XX_IOPAD(0x908, (PIN_INPUT_PULLUP | MUX_MODE1)) /* mii1_col.rmii2_refclk */ + AM33XX_IOPAD(0x86c, (PIN_INPUT_PULLUP | MUX_MODE3)) /* gpmc_a11.rmii2_rxd0 */ + AM33XX_IOPAD(0x868, (PIN_INPUT_PULLUP | MUX_MODE3)) /* gpmc_a10.rmii2_rxd1 */ + AM33XX_IOPAD(0x874, (PIN_INPUT_PULLUP | MUX_MODE3)) /* gpmc_wpn.rmii2_rxerr */ + AM33XX_IOPAD(0x854, (PIN_OUTPUT_PULLDOWN | MUX_MODE3)) /* gpmc_a5.rmii2_txd0 */ + AM33XX_IOPAD(0x850, (PIN_OUTPUT_PULLDOWN | MUX_MODE3)) /* gpmc_a4.rmii2_txd1 */ + AM33XX_IOPAD(0x840, (PIN_OUTPUT_PULLDOWN | MUX_MODE3)) /* gpmc_a0.rmii2_txen */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + AM33XX_IOPAD(0x90c, (PIN_INPUT_PULLDOWN | MUX_MODE7)) + AM33XX_IOPAD(0x944, (PIN_INPUT_PULLDOWN | MUX_MODE7)) + AM33XX_IOPAD(0x940, (PIN_INPUT_PULLDOWN | MUX_MODE7)) + AM33XX_IOPAD(0x93c, (PIN_INPUT_PULLDOWN | MUX_MODE7)) + AM33XX_IOPAD(0x910, (PIN_INPUT_PULLDOWN | MUX_MODE7)) + AM33XX_IOPAD(0x928, (PIN_INPUT_PULLDOWN | MUX_MODE7)) + AM33XX_IOPAD(0x924, (PIN_INPUT_PULLDOWN | MUX_MODE7)) + AM33XX_IOPAD(0x914, (PIN_INPUT_PULLDOWN | MUX_MODE7)) + + /* Slave 2 reset value */ + AM33XX_IOPAD(0x870, (PIN_INPUT_PULLDOWN | MUX_MODE7)) + AM33XX_IOPAD(0x908, (PIN_INPUT_PULLDOWN | MUX_MODE7)) + AM33XX_IOPAD(0x86c, (PIN_INPUT_PULLDOWN | MUX_MODE7)) + AM33XX_IOPAD(0x868, (PIN_INPUT_PULLDOWN | MUX_MODE7)) + AM33XX_IOPAD(0x874, (PIN_INPUT_PULLDOWN | MUX_MODE7)) + AM33XX_IOPAD(0x854, (PIN_INPUT_PULLDOWN | MUX_MODE7)) + AM33XX_IOPAD(0x850, (PIN_INPUT_PULLDOWN | MUX_MODE7)) + AM33XX_IOPAD(0x840, (PIN_INPUT_PULLDOWN | MUX_MODE7)) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + AM33XX_IOPAD(0x948, (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)) /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x94c, (PIN_OUTPUT_PULLUP | MUX_MODE0)) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + AM33XX_IOPAD(0x948, (PIN_INPUT_PULLDOWN | MUX_MODE7)) + AM33XX_IOPAD(0x94c, (PIN_INPUT_PULLDOWN | MUX_MODE7)) + >; + }; }; &i2c0 { @@ -245,6 +308,39 @@ spi-max-frequency = <1000000>; spi-cpol; }; + + spi_nor: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "winbond,w25q64", "jedec,spi-nor"; + spi-max-frequency = <80000000>; + m25p,fast-read; + reg = <0>; + + partition@0 { + label = "u-boot-spl"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@1 { + label = "u-boot"; + reg = <0x80000 0x100000>; + read-only; + }; + + partition@2 { + label = "u-boot-env"; + reg = <0x180000 0x20000>; + read-only; + }; + + partition@3 { + label = "misc"; + reg = <0x1A0000 0x660000>; + }; + }; + }; &tscadc { @@ -350,3 +446,61 @@ pinctrl-0 = <&uart3_pins_default>; status = "okay"; }; + +&gpio3 { + p4 { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "PR1_MII_CTRL"; + }; + + p10 { + gpio-hog; + gpios = <10 GPIO_ACTIVE_HIGH>; + /* ETH1 mux: Low for MII-PRU, high for RMII-CPSW */ + output-high; + line-name = "MUX_MII_CTL1"; + }; +}; + +&cpsw_emac0 { + phy-handle = <ðphy0>; + phy-mode = "rmii"; + dual_emac_res_vlan = <1>; +}; + +&cpsw_emac1 { + phy-handle = <ðphy1>; + phy-mode = "rmii"; + dual_emac_res_vlan = <2>; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + status = "okay"; + dual_emac; +}; + +&phy_sel { + rmii-clock-ext; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; + reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; + reset-delay-us = <2>; /* PHY datasheet states 1uS min */ + + ethphy0: ethernet-phy@1 { + reg = <1>; + }; + + ethphy1: ethernet-phy@3 { + reg = <3>; + }; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 9e96d60976b7..9e242943dcec 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -46,19 +46,7 @@ device_type = "cpu"; reg = <0>; - /* - * To consider voltage drop between PMIC and SoC, - * tolerance value is reduced to 2% from 4% and - * voltage value is increased as a precaution. - */ - operating-points = < - /* kHz uV */ - 720000 1285000 - 600000 1225000 - 500000 1125000 - 275000 1125000 - >; - voltage-tolerance = <2>; /* 2 percentage */ + operating-points-v2 = <&cpu0_opp_table>; clocks = <&dpll_mpu_ck>; clock-names = "cpu"; @@ -67,6 +55,79 @@ }; }; + cpu0_opp_table: opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; + + /* + * The three following nodes are marked with opp-suspend + * because the can not be enabled simultaneously on a + * single SoC. + */ + opp50@300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <950000 931000 969000>; + opp-supported-hw = <0x06 0x0010>; + opp-suspend; + }; + + opp100@275000000 { + opp-hz = /bits/ 64 <275000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x01 0x00FF>; + opp-suspend; + }; + + opp100@300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x06 0x0020>; + opp-suspend; + }; + + opp100@500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + opp100@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x06 0x0040>; + }; + + opp120@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1200000 1176000 1224000>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + opp120@720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1200000 1176000 1224000>; + opp-supported-hw = <0x06 0x0080>; + }; + + oppturbo@720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1260000 1234800 1285200>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + oppturbo@800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1260000 1234800 1285200>; + opp-supported-hw = <0x06 0x0100>; + }; + + oppnitro@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1325000 1298500 1351500>; + opp-supported-hw = <0x04 0x0200>; + }; + }; + pmu { compatible = "arm,cortex-a8-pmu"; interrupts = <3>; diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi index 9fe545dbfa89..00da3f2c4072 100644 --- a/arch/arm/boot/dts/am3517.dtsi +++ b/arch/arm/boot/dts/am3517.dtsi @@ -13,6 +13,7 @@ / { aliases { serial3 = &uart4; + can = &hecc; }; ocp@68000000 { @@ -72,6 +73,17 @@ pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0xff1f>; }; + + hecc: can@5c050000 { + compatible = "ti,am3517-hecc"; + status = "disabled"; + reg = <0x5c050000 0x80>, + <0x5c053000 0x180>, + <0x5c052000 0x200>; + reg-names = "hecc", "hecc-ram", "mbx"; + interrupts = <24>; + clocks = <&hecc_ck>; + }; }; }; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 97fcaf415de1..176e09e9a45e 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -50,15 +50,14 @@ clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; - ti,syscon-efuse = <&scm_conf 0x610 0x3f 0>; - ti,syscon-rev = <&scm_conf 0x600>; clock-latency = <300000>; /* From omap-cpufreq driver */ }; }; - cpu0_opp_table: opp_table0 { - compatible = "operating-points-v2"; + cpu0_opp_table: opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; opp50@300000000 { opp-hz = /bits/ 64 <300000000>; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index a4f31739057f..397e98b7e246 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -501,6 +501,21 @@ AM4372_IOPAD(0x884, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */ >; }; + + uart0_pins_default: uart0_pins_default { + pinctrl-single,pins = < + AM4372_IOPAD(0x968, PIN_INPUT | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */ + AM4372_IOPAD(0x96C, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */ + AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM4372_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; +}; + +&uart0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_default>; }; &i2c0 { diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index e5ac1d81d15c..c536b2f5389f 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -101,6 +101,22 @@ }; }; +&dra7_pmx_core { + dcan1_pins_default: dcan1_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ + DRA7XX_CORE_IOPAD(0x37d4, PIN_INPUT_PULLUP | MUX_MODE0) /* dcan1_rx */ + >; + }; + + dcan1_pins_sleep: dcan1_pins_sleep { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ + DRA7XX_CORE_IOPAD(0x37d4, MUX_MODE15 | PULL_UP) /* dcan1_rx.off */ + >; + }; +}; + &i2c1 { status = "okay"; clock-frequency = <400000>; @@ -391,6 +407,14 @@ max-frequency = <96000000>; }; +&dcan1 { + status = "okay"; + pinctrl-names = "default", "sleep", "active"; + pinctrl-0 = <&dcan1_pins_sleep>; + pinctrl-1 = <&dcan1_pins_sleep>; + pinctrl-2 = <&dcan1_pins_default>; +}; + &qspi { status = "okay"; diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts new file mode 100644 index 000000000000..c7a8ddd7f9a5 --- /dev/null +++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts @@ -0,0 +1,114 @@ +/* + * Device Tree file for the Linksys WRT1900ACS (Shelby) + * + * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org> + * + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "armada-385-linksys.dtsi" + +/ { + model = "Linksys WRT1900ACS"; + compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385", + "marvell,armada380"; + + soc { + internal-regs{ + i2c@11000 { + + pca9635@68 { + #address-cells = <1>; + #size-cells = <0>; + + wan_amber@0 { + label = "shelby:amber:wan"; + reg = <0x0>; + }; + + wan_white@1 { + label = "shelby:white:wan"; + reg = <0x1>; + }; + + wlan_2g@2 { + label = "shelby:white:wlan_2g"; + reg = <0x2>; + }; + + wlan_5g@3 { + label = "shelby:white:wlan_5g"; + reg = <0x3>; + }; + + usb2@5 { + label = "shelby:white:usb2"; + reg = <0x5>; + }; + + usb3_1@6 { + label = "shelby:white:usb3_1"; + reg = <0x6>; + }; + + usb3_2@7 { + label = "shelby:white:usb3_2"; + reg = <0x7>; + }; + + wps_white@8 { + label = "shelby:white:wps"; + reg = <0x8>; + }; + + wps_amber@9 { + label = "shelby:amber:wps"; + reg = <0x9>; + }; + }; + }; + }; + }; + + gpio-leds { + power { + label = "shelby:white:power"; + }; + + sata { + label = "shelby:white:sata"; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index df47bf1ea5eb..2306c45685b1 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -59,7 +59,8 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; internal-regs { i2c@11000 { @@ -88,6 +89,9 @@ ethernet@70000 { status = "okay"; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <2>; + bm,pool-short = <3>; fixed-link { speed = <1000>; full-duplex; @@ -97,6 +101,9 @@ ethernet@34000 { status = "okay"; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <1>; fixed-link { speed = <1000>; full-duplex; @@ -159,6 +166,10 @@ status = "okay"; }; + bm@c8000 { + status = "okay"; + }; + /* USB part of the eSATA/USB 2.0 port */ usb@58000 { status = "okay"; @@ -241,6 +252,10 @@ }; }; + bm-bppi { + status = "okay"; + }; + pcie-controller { status = "okay"; @@ -305,6 +320,7 @@ sata { gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; default-state = "off"; + linux,default-trigger = "disk-activity"; }; }; diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts new file mode 100644 index 000000000000..31510eb56f10 --- /dev/null +++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts @@ -0,0 +1,321 @@ +/* + * Device Tree file for Synology DS116 NAS + * + * Copyright (C) 2017 Willy Tarreau <w@1wt.eu> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "armada-385.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Synology DS116"; + compatible = "marvell,a385-gp", "marvell,armada385", "marvell,armada380"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; /* 1 GB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; + + internal-regs { + i2c@11000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + clock-frequency = <100000>; + + eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + }; + }; + + serial@12000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; + }; + + serial@12100 { + /* A PIC16F1829 is connected to uart1 at 9600 bps, + * and takes single-character orders : + * "1" : power off // already handled by the poweroff node + * "2" : short beep + * "3" : long beep + * "4" : turn the power LED ON + * "5" : flash the power LED + * "6" : turn the power LED OFF + * "7" : turn the status LED OFF + * "8" : turn the status LED ON + * "9" : flash the status LED + * "A" : flash the motherboard LED (D8) + * "B" : turn the motherboard LED OFF + * "C" : hard reset + */ + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; + }; + + poweroff@12100 { + compatible = "synology,power-off"; + reg = <0x12100 0x100>; + clocks = <&coreclk 0>; + }; + + ethernet@70000 { + pinctrl-names = "default"; + phy = <&phy0>; + phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + status = "okay"; + }; + + + mdio@72004 { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + + phy0: ethernet-phy@1 { + reg = <1>; + }; + }; + + sata@a8000 { + pinctrl-names = "default"; + pinctrl-0 = <&sata0_pins>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + sata0: sata-port@0 { + reg = <0>; + target-supply = <®_5v_sata0>; + }; + }; + + bm@c8000 { + status = "okay"; + }; + + usb3@f0000 { + usb-phy = <&usb3_0_phy>; + status = "okay"; + }; + + usb3@f8000 { + usb-phy = <&usb3_1_phy>; + status = "okay"; + }; + }; + + bm-bppi { + status = "okay"; + }; + + gpio-fan { + compatible = "gpio-fan"; + gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>, + <&gpio1 17 GPIO_ACTIVE_HIGH>, + <&gpio1 16 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = < 0 0 + 1500 1 + 2500 2 + 3000 3 + 3400 4 + 3700 5 + 3900 6 + 4000 7>; + cooling-cells = <2>; + }; + + gpio-leds { + compatible = "gpio-leds"; + + /* The green part is on gpio0.20 which is also used by + * sata0, and accesses to SATA disk 0 make it blink so it + * doesn't need to be declared here. + */ + orange { + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + label = "ds116:orange:disk"; + default-state = "off"; + }; + }; + }; + + usb3_0_phy: usb3_0_phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_usb3_0_vbus>; + }; + + usb3_1_phy: usb3_1_phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_usb3_1_vbus>; + }; + + reg_usb3_0_vbus: usb3-vbus0 { + compatible = "regulator-fixed"; + regulator-name = "usb3-vbus0"; + pinctrl-names = "default"; + pinctrl-0 = <&xhci0_vbus_pins>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; + }; + + reg_usb3_1_vbus: usb3-vbus1 { + compatible = "regulator-fixed"; + regulator-name = "usb3-vbus1"; + pinctrl-names = "default"; + pinctrl-0 = <&xhci1_vbus_pins>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; + }; + + reg_sata0: pwr-sata0 { + compatible = "regulator-fixed"; + regulator-name = "pwr_en_sata0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + enable-active-high; + regulator-boot-on; + gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>; + }; + + reg_5v_sata0: v5-sata0 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-sata0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_sata0>; + }; + + reg_12v_sata0: v12-sata0 { + compatible = "regulator-fixed"; + regulator-name = "v12.0-sata0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <®_sata0>; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "macronix,mx25l6405d", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + m25p,fast-read; + + /* Note: there is a redboot partition table despite u-boot + * being used. The names presented here are the same as those + * found in the FIS directory. There is also a small device + * tree in the last 64kB of the RedBoot partition which is not + * enumerated. The MAC address and the serial number are listed + * in the "vendor" partition. + */ + partition@00000000 { + label = "RedBoot"; + reg = <0x00000000 0x000f0000>; + read-only; + }; + + partition@000c0000 { + label = "zImage"; + reg = <0x000f0000 0x002d0000>; + }; + + partition@00390000 { + label = "rd.gz"; + reg = <0x003c0000 0x00410000>; + }; + + partition@007d0000 { + label = "vendor"; + reg = <0x007d0000 0x00010000>; + read-only; + }; + + partition@007e0000 { + label = "RedBoot config"; + reg = <0x007e0000 0x00010000>; + read-only; + }; + + partition@007f0000 { + label = "FIS directory"; + reg = <0x007f0000 0x00010000>; + read-only; + }; + }; +}; + +&pinctrl { + /* use only one pin for UART1, as mpp20 is used by sata0 */ + uart1_pins: uart-pins-1 { + marvell,pins = "mpp19"; + marvell,function = "ua1"; + }; + + xhci0_vbus_pins: xhci0_vbus_pins { + marvell,pins = "mpp58"; + marvell,function = "gpio"; + }; + xhci1_vbus_pins: xhci1_vbus_pins { + marvell,pins = "mpp59"; + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi index 8e63be33472e..7fcc4c4885cf 100644 --- a/arch/arm/boot/dts/armada-385.dtsi +++ b/arch/arm/boot/dts/armada-385.dtsi @@ -70,13 +70,7 @@ }; soc { - internal-regs { - pinctrl@18000 { - compatible = "marvell,mv88f6820-pinctrl"; - }; - }; - - pcie-controller { + pciec: pcie-controller { compatible = "marvell,armada-370-pcie"; status = "disabled"; device_type = "pci"; @@ -106,7 +100,7 @@ * configured in x4 by the bootloader, then * pcie@4,0 is not available. */ - pcie@1,0 { + pcie1: pcie@1,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; reg = <0x0800 0 0 0 0>; @@ -124,7 +118,7 @@ }; /* x1 port */ - pcie@2,0 { + pcie2: pcie@2,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; reg = <0x1000 0 0 0 0>; @@ -142,7 +136,7 @@ }; /* x1 port */ - pcie@3,0 { + pcie3: pcie@3,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; reg = <0x1800 0 0 0 0>; @@ -163,7 +157,7 @@ * x1 port only available when pcie@1,0 is * configured as a x1 port */ - pcie@4,0 { + pcie4: pcie@4,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; reg = <0x2000 0 0 0 0>; @@ -182,3 +176,7 @@ }; }; }; + +&pinctrl { + compatible = "marvell,mv88f6820-pinctrl"; +}; diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts index 2745b7416313..0d5f1f062275 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dts +++ b/arch/arm/boot/dts/armada-388-clearfog.dts @@ -186,25 +186,6 @@ }; }; -&pinctrl { - clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins { - marvell,pins = "mpp46"; - marvell,function = "ref"; - }; - clearfog_dsa0_pins: clearfog-dsa0-pins { - marvell,pins = "mpp23", "mpp41"; - marvell,function = "gpio"; - }; - clearfog_spi1_cs_pins: spi1-cs-pins { - marvell,pins = "mpp55"; - marvell,function = "spi1"; - }; - rear_button_pins: rear-button-pins { - marvell,pins = "mpp34"; - marvell,function = "gpio"; - }; -}; - &mdio { status = "okay"; @@ -268,6 +249,25 @@ }; }; +&pinctrl { + clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins { + marvell,pins = "mpp46"; + marvell,function = "ref"; + }; + clearfog_dsa0_pins: clearfog-dsa0-pins { + marvell,pins = "mpp23", "mpp41"; + marvell,function = "gpio"; + }; + clearfog_spi1_cs_pins: spi1-cs-pins { + marvell,pins = "mpp55"; + marvell,function = "spi1"; + }; + rear_button_pins: rear-button-pins { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; +}; + &spi1 { /* * Add SPI CS pins for clearfog: diff --git a/arch/arm/boot/dts/armada-388.dtsi b/arch/arm/boot/dts/armada-388.dtsi index 564fa5937e25..1c0d151b2aaa 100644 --- a/arch/arm/boot/dts/armada-388.dtsi +++ b/arch/arm/boot/dts/armada-388.dtsi @@ -50,13 +50,8 @@ model = "Marvell Armada 388 family SoC"; compatible = "marvell,armada388", "marvell,armada385", "marvell,armada380"; - soc { internal-regs { - pinctrl@18000 { - compatible = "marvell,mv88f6828-pinctrl"; - }; - sata@e0000 { compatible = "marvell,armada-380-ahci"; reg = <0xe0000 0x2000>; @@ -68,3 +63,7 @@ }; }; }; + +&pinctrl { + compatible = "marvell,mv88f6828-pinctrl"; +}; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 79b767507eab..8b165c31de1e 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -82,7 +82,7 @@ reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>; }; - devbus-bootcs { + devbus_bootcs: devbus-bootcs { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>; ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>; @@ -92,7 +92,7 @@ status = "disabled"; }; - devbus-cs0 { + devbus_cs0: devbus-cs0 { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>; ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>; @@ -102,7 +102,7 @@ status = "disabled"; }; - devbus-cs1 { + devbus_cs1: devbus-cs1 { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>; ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>; @@ -112,7 +112,7 @@ status = "disabled"; }; - devbus-cs2 { + devbus_cs2: devbus-cs2 { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>; ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>; @@ -122,7 +122,7 @@ status = "disabled"; }; - devbus-cs3 { + devbus_cs3: devbus-cs3 { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>; ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>; @@ -339,7 +339,7 @@ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; }; - system-controller@18200 { + systemc: system-controller@18200 { compatible = "marvell,armada-380-system-controller", "marvell,armada-370-xp-system-controller"; reg = <0x18200 0x100>; @@ -360,7 +360,8 @@ mbusc: mbus-controller@20000 { compatible = "marvell,mbus-controller"; - reg = <0x20000 0x100>, <0x20180 0x20>; + reg = <0x20000 0x100>, <0x20180 0x20>, + <0x20250 0x8>; }; mpic: interrupt-controller@20a00 { @@ -373,7 +374,7 @@ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; }; - timer@20300 { + timer: timer@20300 { compatible = "marvell,armada-380-timer", "marvell,armada-xp-timer"; reg = <0x20300 0x30>, <0x21040 0x30>; @@ -387,14 +388,14 @@ clock-names = "nbclk", "fixed"; }; - watchdog@20300 { + watchdog: watchdog@20300 { compatible = "marvell,armada-380-wdt"; reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>; clocks = <&coreclk 2>, <&refclk>; clock-names = "nbclk", "fixed"; }; - cpurst@20800 { + cpurst: cpurst@20800 { compatible = "marvell,armada-370-cpu-reset"; reg = <0x20800 0x10>; }; @@ -404,12 +405,12 @@ reg = <0x20d20 0x6c>; }; - coherency-fabric@21010 { + coherencyfab: coherency-fabric@21010 { compatible = "marvell,armada-380-coherency-fabric"; reg = <0x21010 0x1c>; }; - pmsu@22000 { + pmsu: pmsu@22000 { compatible = "marvell,armada-380-pmsu"; reg = <0x22000 0x1000>; }; @@ -451,7 +452,7 @@ status = "disabled"; }; - usb@58000 { + usb0: usb@58000 { compatible = "marvell,orion-ehci"; reg = <0x58000 0x500>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; @@ -459,7 +460,7 @@ status = "disabled"; }; - xor@60800 { + xor0: xor@60800 { compatible = "marvell,armada-380-xor", "marvell,orion-xor"; reg = <0x60800 0x100 0x60a00 0x100>; @@ -479,7 +480,7 @@ }; }; - xor@60900 { + xor1: xor@60900 { compatible = "marvell,armada-380-xor", "marvell,orion-xor"; reg = <0x60900 0x100 0x60b00 0x100>; @@ -507,7 +508,7 @@ clocks = <&gateclk 4>; }; - crypto@90000 { + cesa: crypto@90000 { compatible = "marvell,armada-38x-crypto"; reg = <0x90000 0x10000>; reg-names = "regs"; @@ -522,14 +523,14 @@ marvell,crypto-sram-size = <0x800>; }; - rtc@a3800 { + rtc: rtc@a3800 { compatible = "marvell,armada-380-rtc"; reg = <0xa3800 0x20>, <0x184a0 0x0c>; reg-names = "rtc", "rtc-soc"; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; }; - sata@a8000 { + ahci0: sata@a8000 { compatible = "marvell,armada-380-ahci"; reg = <0xa8000 0x2000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; @@ -545,7 +546,7 @@ status = "disabled"; }; - sata@e0000 { + ahci1: sata@e0000 { compatible = "marvell,armada-380-ahci"; reg = <0xe0000 0x2000>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; @@ -561,13 +562,13 @@ clock-output-names = "nand"; }; - thermal@e8078 { + thermal: thermal@e8078 { compatible = "marvell,armada380-thermal"; reg = <0xe4078 0x4>, <0xe4074 0x4>; status = "okay"; }; - flash@d0000 { + nand: flash@d0000 { compatible = "marvell,armada370-nand"; reg = <0xd0000 0x54>; #address-cells = <1>; @@ -577,7 +578,7 @@ status = "disabled"; }; - sdhci@d8000 { + sdhci: sdhci@d8000 { compatible = "marvell,armada-380-sdhci"; reg-names = "sdhci", "mbus", "conf-sdio3"; reg = <0xd8000 0x1000>, @@ -589,7 +590,7 @@ status = "disabled"; }; - usb3@f0000 { + usb3_0: usb3@f0000 { compatible = "marvell,armada-380-xhci"; reg = <0xf0000 0x4000>,<0xf4000 0x4000>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; @@ -597,7 +598,7 @@ status = "disabled"; }; - usb3@f8000 { + usb3_1: usb3@f8000 { compatible = "marvell,armada-380-xhci"; reg = <0xf8000 0x4000>,<0xfc000 0x4000>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi index f6a03dcee5ef..84cc232a29e9 100644 --- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi @@ -45,11 +45,14 @@ * common to all Armada XP SoCs. */ -#include "armada-xp.dtsi" +#include "armada-370-xp.dtsi" / { + #address-cells = <2>; + #size-cells = <2>; + model = "Marvell 98DX3236 SoC"; - compatible = "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp"; + compatible = "marvell,armadaxp-98dx3236", "marvell,armada-370-xp"; aliases { gpio0 = &gpio0; @@ -72,12 +75,19 @@ }; soc { + compatible = "marvell,armadaxp-mbus", "simple-bus"; + ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000 MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000 MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>; + bootrom { + compatible = "marvell,bootrom"; + reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>; + }; + /* * 98DX3236 has 1 x1 PCIe unit Gen2.0 */ @@ -95,8 +105,7 @@ ranges = <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ - 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ - 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */>; + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; pcie1: pcie@1,0 { device_type = "pci"; @@ -117,31 +126,86 @@ }; internal-regs { - coreclk: mvebu-sar@18230 { - compatible = "marvell,mv98dx3236-core-clock"; + sdramc@1400 { + compatible = "marvell,armada-xp-sdram-controller"; + reg = <0x1400 0x500>; + }; + + L2: l2-cache@8000 { + compatible = "marvell,aurora-system-cache"; + reg = <0x08000 0x1000>; + cache-id-part = <0x100>; + cache-level = <2>; + cache-unified; + wt-override; + }; + + gpio0: gpio@18100 { + compatible = "marvell,orion-gpio"; + reg = <0x18100 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <82>, <83>, <84>, <85>; + }; + + /* does not exist */ + gpio1: gpio@18140 { + compatible = "marvell,orion-gpio"; + reg = <0x18140 0x40>; + status = "disabled"; + }; + + gpio2: gpio@18180 { /* rework some properties */ + compatible = "marvell,orion-gpio"; + reg = <0x18180 0x40>; + ngpios = <1>; /* only gpio #32 */ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <87>; + }; + + systemc: system-controller@18200 { + compatible = "marvell,armada-370-xp-system-controller"; + reg = <0x18200 0x500>; + }; + + gateclk: clock-gating-control@18220 { + compatible = "marvell,mv98dx3236-gating-clock"; + reg = <0x18220 0x4>; + clocks = <&coreclk 0>; + #clock-cells = <1>; }; cpuclk: clock-complex@18700 { + #clock-cells = <1>; compatible = "marvell,mv98dx3236-cpu-clock"; + reg = <0x18700 0x24>, <0x1c054 0x10>; + clocks = <&coreclk 1>; }; corediv-clock@18740 { status = "disabled"; }; - xor@60900 { - status = "disabled"; + cpu-config@21000 { + compatible = "marvell,armada-xp-cpu-config"; + reg = <0x21000 0x8>; }; - crypto@90000 { - status = "disabled"; + ethernet@70000 { + compatible = "marvell,armada-xp-neta"; }; - xor@f0900 { - status = "disabled"; + ethernet@74000 { + compatible = "marvell,armada-xp-neta"; }; - xor@f0800 { + xor1: xor@f0800 { compatible = "marvell,orion-xor"; reg = <0xf0800 0x100 0xf0a00 0x100>; @@ -161,45 +225,43 @@ }; }; - gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; - reg = <0x18100 0x40>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; - }; - - /* does not exist */ - gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; - reg = <0x18140 0x40>; - status = "disabled"; + nand: nand@d0000 { + clocks = <&dfx_coredivclk 0>; }; - gpio2: gpio@18180 { /* rework some properties */ - compatible = "marvell,orion-gpio"; - reg = <0x18180 0x40>; - ngpios = <1>; /* only gpio #32 */ - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <87>; - }; + xor0: xor@f0900 { + compatible = "marvell,orion-xor"; + reg = <0xF0900 0x100 + 0xF0B00 0x100>; + clocks = <&gateclk 28>; + status = "okay"; - nand: nand@d0000 { - clocks = <&dfx_coredivclk 0>; + xor00 { + interrupts = <94>; + dmacap,memcpy; + dmacap,xor; + }; + xor01 { + interrupts = <95>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; }; }; - dfxr: dfx-registers@ac000000 { - compatible = "simple-bus"; + dfx: dfx-server@ac000000 { + compatible = "marvell,dfx-server", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>; + reg = <MBUS_ID(0x08, 0x00) 0 0x100000>; + + coreclk: mvebu-sar@f8204 { + compatible = "marvell,mv98dx3236-core-clock"; + reg = <0xf8204 0x4>; + #clock-cells = <1>; + }; dfx_coredivclk: corediv-clock@f8268 { compatible = "marvell,mv98dx3236-corediv-clock"; @@ -208,11 +270,6 @@ clocks = <&mainpll>; clock-output-names = "nand"; }; - - dfx: dfx@0 { - compatible = "marvell,dfx-server"; - reg = <0 0x100000>; - }; }; switch: switch@a8000000 { @@ -229,6 +286,53 @@ }; }; }; + + clocks { + /* 25 MHz reference crystal */ + refclk: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + }; +}; + +&i2c0 { + compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; + reg = <0x11000 0x100>; +}; + +&i2c1 { + compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; + reg = <0x11100 0x100>; +}; + +&mpic { + reg = <0x20a00 0x2d0>, <0x21070 0x58>; +}; + +&timer { + compatible = "marvell,armada-xp-timer"; + clocks = <&coreclk 2>, <&refclk>; + clock-names = "nbclk", "fixed"; +}; + +&watchdog { + compatible = "marvell,armada-xp-wdt"; + clocks = <&coreclk 2>, <&refclk>; + clock-names = "nbclk", "fixed"; +}; + +&cpurst { + reg = <0x20800 0x20>; +}; + +&usb0 { + clocks = <&gateclk 18>; +}; + +&usb1 { + clocks = <&gateclk 19>; }; &pinctrl { @@ -241,14 +345,13 @@ }; }; -&sdio { - status = "disabled"; +&spi0 { + compatible = "marvell,armada-xp-spi", "marvell,orion-spi"; + pinctrl-0 = <&spi0_pins>; + pinctrl-names = "default"; }; -&crypto_sram0 { +&sdio { status = "disabled"; }; -&crypto_sram1 { - status = "disabled"; -}; diff --git a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi index e1580afdc260..a0d81bd7312b 100644 --- a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi +++ b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi @@ -49,7 +49,7 @@ / { model = "Marvell 98DX3336 SoC"; - compatible = "marvell,armadaxp-98dx3336", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp"; + compatible = "marvell,armadaxp-98dx3336", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp"; cpus { cpu@1 { diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi index b9d9b269efb4..51de91b31a9d 100644 --- a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi +++ b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi @@ -49,7 +49,7 @@ / { model = "Marvell 98DX4251 SoC"; - compatible = "marvell,armadaxp-98dx4251", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp"; + compatible = "marvell,armadaxp-98dx4251", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp"; cpus { cpu@1 { diff --git a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts index a8130805074e..1b1ff17fdd9c 100644 --- a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts +++ b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts @@ -58,7 +58,7 @@ / { model = "Marvell Bobcat2 Evaluation Board"; - compatible = "marvell,db-dxbc2", "marvell,armadaxp-98dx4251", "marvell,armadaxp", "marvell,armada-370-xp"; + compatible = "marvell,db-dxbc2", "marvell,armadaxp-98dx4251", "marvell,armada-370-xp"; chosen { bootargs = "console=ttyS0,115200 earlyprintk"; diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts index 4e07cb6ed800..06fce35d7491 100644 --- a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts +++ b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts @@ -58,7 +58,7 @@ / { model = "DB-XC3-24G4XG"; - compatible = "marvell,db-xc3-24g4xg", "marvell,armadaxp-98dx3336", "marvell,armadaxp", "marvell,armada-370-xp"; + compatible = "marvell,db-xc3-24g4xg", "marvell,armadaxp-98dx3336", "marvell,armada-370-xp"; chosen { bootargs = "console=ttyS0,115200 earlyprintk"; diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index 42ea8764814c..9efcf59c9b44 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -71,7 +71,8 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>; internal-regs { @@ -95,6 +96,9 @@ pinctrl-names = "default"; status = "okay"; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <1>; fixed-link { speed = <1000>; full-duplex; @@ -106,6 +110,9 @@ pinctrl-names = "default"; status = "okay"; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <2>; + bm,pool-short = <3>; fixed-link { speed = <1000>; full-duplex; @@ -156,6 +163,7 @@ esata@4 { label = "mamba:white:esata"; reg = <0x4>; + linux,default-trigger = "disk-activity"; }; usb2@5 { @@ -185,6 +193,10 @@ }; }; + bm@c8000 { + status = "okay"; + }; + nand@d0000 { status = "okay"; num-cs = <1>; @@ -258,6 +270,10 @@ }; }; }; + + bm-bppi { + status = "okay"; + }; }; gpio_keys { diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts index d967603dade8..7c90dac99822 100644 --- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts @@ -20,6 +20,28 @@ }; }; +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + }; +}; + +&spi1 { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + }; +}; + +&spi2 { + status = "okay"; +}; + &uart5 { status = "okay"; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts index 1d2fc1e1dc29..112551766275 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts @@ -31,6 +31,24 @@ }; }; +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + }; +}; + +&spi { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + }; +}; + &uart5 { status = "okay"; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts index 7a3b2b50c884..1190fec1b5d0 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts @@ -31,6 +31,42 @@ }; }; +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + }; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + &uart5 { status = "okay"; }; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index c79c937b0a8a..8c6bc29eb7f6 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -18,21 +18,41 @@ }; }; - clocks { - clk_clkin: clk_clkin { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <48000000>; - }; - - }; - ahb { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; + fmc: flash-controller@1e620000 { + reg = < 0x1e620000 0x94 + 0x20000000 0x02000000 >; + #address-cells = <1>; + #size-cells = <0>; + compatible = "aspeed,ast2400-fmc"; + status = "disabled"; + interrupts = <19>; + flash@0 { + reg = < 0 >; + compatible = "jedec,spi-nor"; + status = "disabled"; + }; + }; + + spi: flash-controller@1e630000 { + reg = < 0x1e630000 0x18 + 0x30000000 0x02000000 >; + #address-cells = <1>; + #size-cells = <0>; + compatible = "aspeed,ast2400-spi"; + status = "disabled"; + flash@0 { + reg = < 0 >; + compatible = "jedec,spi-nor"; + status = "disabled"; + }; + }; + vic: interrupt-controller@1e6c0080 { compatible = "aspeed,ast2400-vic"; interrupt-controller; @@ -61,16 +81,48 @@ #size-cells = <1>; ranges; - clk_hpll: clk_hpll@1e6e2070 { - #clock-cells = <0>; - compatible = "aspeed,g4-hpll-clock"; - reg = <0x1e6e2070 0x4>; - clocks = <&clk_clkin>; - }; - syscon: syscon@1e6e2000 { compatible = "aspeed,g4-scu", "syscon", "simple-mfd"; reg = <0x1e6e2000 0x1a8>; + #address-cells = <1>; + #size-cells = <0>; + + clk_clkin: clk_clkin { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <48000000>; + }; + + clk_hpll: clk_hpll@70 { + #clock-cells = <0>; + compatible = "aspeed,g4-hpll-clock", "fixed-clock"; + reg = <0x70>; + clocks = <&clk_clkin>; + clock-frequency = <384000000>; + }; + + clk_ahb: clk_ahb@70 { + #clock-cells = <0>; + compatible = "aspeed,g4-ahb-clock", "fixed-clock"; + reg = <0x70>; + clocks = <&clk_hpll>; + clock-frequency = <192000000>; + }; + + clk_apb: clk_apb@08 { + #clock-cells = <0>; + compatible = "aspeed,g4-apb-clock", "fixed-clock"; + reg = <0x08>; + clocks = <&clk_hpll>; + clock-frequency = <48000000>; + }; + + clk_uart: clk_uart@2c{ + #clock-cells = <0>; + compatible = "aspeed,g4-uart-clock", "fixed-clock"; + reg = <0x2c>; + clock-frequency = <24000000>; + }; pinctrl: pinctrl { compatible = "aspeed,g4-pinctrl"; @@ -818,19 +870,6 @@ }; }; - clk_apb: clk_apb@1e6e2008 { - #clock-cells = <0>; - compatible = "aspeed,g4-apb-clock"; - reg = <0x1e6e2008 0x4>; - clocks = <&clk_hpll>; - }; - - clk_uart: clk_uart@1e6e2008 { - #clock-cells = <0>; - compatible = "aspeed,uart-clock"; - reg = <0x1e6e202c 0x4>; - }; - sram@1e720000 { compatible = "mmio-sram"; reg = <0x1e720000 0x8000>; // 32K @@ -857,13 +896,13 @@ }; wdt1: wdt@1e785000 { - compatible = "aspeed,wdt"; + compatible = "aspeed,ast2400-wdt"; reg = <0x1e785000 0x1c>; interrupts = <27>; }; wdt2: wdt@1e785020 { - compatible = "aspeed,wdt"; + compatible = "aspeed,ast2400-wdt"; reg = <0x1e785020 0x1c>; interrupts = <27>; clocks = <&clk_apb>; @@ -930,6 +969,14 @@ no-loopback-test; status = "disabled"; }; + + adc: adc@1e6e9000 { + compatible = "aspeed,ast2400-adc"; + reg = <0x1e6e9000 0xb0>; + clocks = <&clk_apb>; + #io-channel-cells = <1>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index b6596633036c..a0bea4a6ec77 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -24,6 +24,69 @@ #size-cells = <1>; ranges; + fmc: flash-controller@1e620000 { + reg = < 0x1e620000 0xc4 + 0x20000000 0x10000000 >; + #address-cells = <1>; + #size-cells = <0>; + compatible = "aspeed,ast2500-fmc"; + status = "disabled"; + interrupts = <19>; + flash@0 { + reg = < 0 >; + compatible = "jedec,spi-nor"; + status = "disabled"; + }; + flash@1 { + reg = < 1 >; + compatible = "jedec,spi-nor"; + status = "disabled"; + }; + flash@2 { + reg = < 2 >; + compatible = "jedec,spi-nor"; + status = "disabled"; + }; + }; + + spi1: flash-controller@1e630000 { + reg = < 0x1e630000 0xc4 + 0x30000000 0x08000000 >; + #address-cells = <1>; + #size-cells = <0>; + compatible = "aspeed,ast2500-spi"; + status = "disabled"; + flash@0 { + reg = < 0 >; + compatible = "jedec,spi-nor"; + status = "disabled"; + }; + flash@1 { + reg = < 1 >; + compatible = "jedec,spi-nor"; + status = "disabled"; + }; + }; + + spi2: flash-controller@1e631000 { + reg = < 0x1e631000 0xc4 + 0x38000000 0x08000000 >; + #address-cells = <1>; + #size-cells = <0>; + compatible = "aspeed,ast2500-spi"; + status = "disabled"; + flash@0 { + reg = < 0 >; + compatible = "jedec,spi-nor"; + status = "disabled"; + }; + flash@1 { + reg = < 1 >; + compatible = "jedec,spi-nor"; + status = "disabled"; + }; + }; + vic: interrupt-controller@1e6c0080 { compatible = "aspeed,ast2400-vic"; interrupt-controller; @@ -52,15 +115,49 @@ #size-cells = <1>; ranges; - clk_clkin: clk_clkin@1e6e2070 { - #clock-cells = <0>; - compatible = "aspeed,g5-clkin-clock"; - reg = <0x1e6e2070 0x04>; - }; - syscon: syscon@1e6e2000 { compatible = "aspeed,g5-scu", "syscon", "simple-mfd"; reg = <0x1e6e2000 0x1a8>; + #address-cells = <1>; + #size-cells = <0>; + + clk_clkin: clk_clkin@70 { + #clock-cells = <0>; + compatible = "aspeed,g5-clkin-clock", "fixed-clock"; + reg = <0x70>; + clock-frequency = <24000000>; + }; + + clk_hpll: clk_hpll@24 { + #clock-cells = <0>; + compatible = "aspeed,g5-hpll-clock", "fixed-clock"; + reg = <0x24>; + clocks = <&clk_clkin>; + clock-frequency = <792000000>; + }; + + clk_ahb: clk_ahb@70 { + #clock-cells = <0>; + compatible = "aspeed,g5-ahb-clock", "fixed-clock"; + reg = <0x70>; + clocks = <&clk_hpll>; + clock-frequency = <198000000>; + }; + + clk_apb: clk_apb@08 { + #clock-cells = <0>; + compatible = "aspeed,g5-apb-clock", "fixed-clock"; + reg = <0x08>; + clocks = <&clk_hpll>; + clock-frequency = <24750000>; + }; + + clk_uart: clk_uart@2c { + #clock-cells = <0>; + compatible = "aspeed,uart-clock", "fixed-clock"; + reg = <0x2c>; + clock-frequency = <24000000>; + }; pinctrl: pinctrl { compatible = "aspeed,g5-pinctrl"; @@ -285,7 +382,6 @@ function = "LAD0"; groups = "LAD0"; }; - pinctrl_lad1_default: lad1_default { function = "LAD1"; groups = "LAD1"; @@ -872,33 +968,7 @@ }; }; - }; - - clk_hpll: clk_hpll@1e6e2024 { - #clock-cells = <0>; - compatible = "aspeed,g5-hpll-clock"; - reg = <0x1e6e2024 0x4>; - clocks = <&clk_clkin>; - }; - - clk_ahb: clk_ahb@1e6e2070 { - #clock-cells = <0>; - compatible = "aspeed,g5-ahb-clock"; - reg = <0x1e6e2070 0x4>; - clocks = <&clk_hpll>; - }; - clk_apb: clk_apb@1e6e2008 { - #clock-cells = <0>; - compatible = "aspeed,g5-apb-clock"; - reg = <0x1e6e2008 0x4>; - clocks = <&clk_hpll>; - }; - - clk_uart: clk_uart@1e6e2008 { - #clock-cells = <0>; - compatible = "aspeed,uart-clock"; - reg = <0x1e6e202c 0x4>; }; gfx: display@1e6e6000 { @@ -934,21 +1004,21 @@ wdt1: wdt@1e785000 { - compatible = "aspeed,wdt"; - reg = <0x1e785000 0x1c>; + compatible = "aspeed,ast2500-wdt"; + reg = <0x1e785000 0x20>; interrupts = <27>; }; wdt2: wdt@1e785020 { - compatible = "aspeed,wdt"; - reg = <0x1e785020 0x1c>; + compatible = "aspeed,ast2500-wdt"; + reg = <0x1e785020 0x20>; interrupts = <27>; status = "disabled"; }; wdt3: wdt@1e785040 { - compatible = "aspeed,wdt"; - reg = <0x1e785074 0x1c>; + compatible = "aspeed,ast2500-wdt"; + reg = <0x1e785040 0x20>; status = "disabled"; }; @@ -1042,6 +1112,14 @@ no-loopback-test; status = "disabled"; }; + + adc: adc@1e6e9000 { + compatible = "aspeed,ast2500-adc"; + reg = <0x1e6e9000 0xb0>; + clocks = <&clk_apb>; + #io-channel-cells = <1>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 9f7f8a7d8ff9..0bef9e0b89c6 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -246,6 +246,7 @@ shdwc@f8048010 { atmel,shdwc-debouncer = <976>; + atmel,wakeup-rtc-timer; input@0 { reg = <0>; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index c51fc652f6c7..5a53fcf542ab 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -162,9 +162,10 @@ }; adc0: adc@f8018000 { + atmel,adc-vref = <3300>; + atmel,adc-channels-used = <0xfe>; pinctrl-0 = < &pinctrl_adc0_adtrg - &pinctrl_adc0_ad0 &pinctrl_adc0_ad1 &pinctrl_adc0_ad2 &pinctrl_adc0_ad3 @@ -172,8 +173,6 @@ &pinctrl_adc0_ad5 &pinctrl_adc0_ad6 &pinctrl_adc0_ad7 - &pinctrl_adc0_ad8 - &pinctrl_adc0_ad9 >; status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts index 669a2c6bdefc..498fba3e52b5 100644 --- a/arch/arm/boot/dts/at91-tse850-3.dts +++ b/arch/arm/boot/dts/at91-tse850-3.dts @@ -86,16 +86,43 @@ #io-channel-cells = <1>; }; - envelope-detector { + env_det: envelope-detector { compatible = "axentia,tse850-envelope-detector"; io-channels = <&dac 0>; io-channel-names = "dac"; + #io-channel-cells = <1>; interrupt-parent = <&pioA>; interrupts = <3 IRQ_TYPE_EDGE_RISING>; interrupt-names = "comp"; }; + mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + + mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>, + <&pioA 1 GPIO_ACTIVE_HIGH>, + <&pioA 2 GPIO_ACTIVE_HIGH>; + idle-state = <0>; + }; + + envelope-detector-mux { + compatible = "io-channel-mux"; + io-channels = <&env_det 0>; + io-channel-names = "parent"; + + mux-controls = <&mux>; + + channels = "", "", + "sync-1", + "in", + "out", + "sync-2", + "sys-reg", + "ana-reg"; + }; + leds { compatible = "gpio-leds"; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index 3fe77c38bd0d..7e80acda8f69 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -263,7 +263,7 @@ }; matrix: matrix@ffffee00 { - compatible = "atmel,at91sam9260-bus-matrix", "syscon"; + compatible = "atmel,at91sam9261-matrix", "syscon"; reg = <0xffffee00 0x200>; }; diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index 696b8ba064a6..9d2bbc41a7b0 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -116,7 +116,7 @@ }; spi0: spi@f0000000 { - status = "okay"; + status = "disabled"; /* conflicts with mmc1 */ cs-gpios = <&pioA 14 0>, <0>, <0>, <0>; m25p80@0 { compatible = "atmel,at25df321a"; diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi index 675bb0f30825..9677dd5cf6b6 100644 --- a/arch/arm/boot/dts/axp209.dtsi +++ b/arch/arm/boot/dts/axp209.dtsi @@ -53,6 +53,11 @@ interrupt-controller; #interrupt-cells = <1>; + ac_power_supply: ac-power-supply { + compatible = "x-powers,axp202-ac-power-supply"; + status = "disabled"; + }; + axp_gpio: gpio { compatible = "x-powers,axp209-gpio"; gpio-controller; diff --git a/arch/arm/boot/dts/axp22x.dtsi b/arch/arm/boot/dts/axp22x.dtsi index 458b6681e3ec..67331c5f1714 100644 --- a/arch/arm/boot/dts/axp22x.dtsi +++ b/arch/arm/boot/dts/axp22x.dtsi @@ -52,6 +52,11 @@ interrupt-controller; #interrupt-cells = <1>; + ac_power_supply: ac-power-supply { + compatible = "x-powers,axp221-ac-power-supply"; + status = "disabled"; + }; + regulators { /* Default work frequency for buck regulators */ x-powers,dcdc-freq = <3000>; diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 8833a4c3cd96..9644fddb5e3c 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -205,7 +205,7 @@ status = "disabled"; msi-parent = <&msi0>; - msi0: msi@18012000 { + msi0: msi-controller { compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; @@ -240,7 +240,7 @@ status = "disabled"; msi-parent = <&msi1>; - msi1: msi@18013000 { + msi1: msi-controller { compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 832795b0fd0f..fe6cba994a97 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -245,6 +245,15 @@ status = "disabled"; }; + mailbox: mailbox@25000 { + compatible = "brcm,iproc-fa2-mbox"; + reg = <0x25000 0x445>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + brcm,rx-status-len = <32>; + brcm,use-bcm-hdr; + }; + nand: nand@26000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x026000 0x600>, @@ -288,6 +297,12 @@ #size-cells = <0>; }; + crypto@2f000 { + compatible = "brcm,spum-nsp-crypto"; + reg = <0x2f000 0x900>; + mboxes = <&mailbox 0>; + }; + gpiob: gpio@30000 { compatible = "brcm,iproc-nsp-gpio", "brcm,iproc-gpio"; reg = <0x30000 0x50>; @@ -306,6 +321,20 @@ status = "disabled"; }; + ehci0: usb@2a000 { + compatible = "generic-ehci"; + reg = <0x2a000 0x100>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + ohci0: usb@2b000 { + compatible = "generic-ohci"; + reg = <0x2b000 0x100>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + rng: rng@33000 { compatible = "brcm,bcm-nsp-rng"; reg = <0x33000 0x14>; @@ -347,6 +376,7 @@ #size-cells = <0>; interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>; clock-frequency = <100000>; + status = "disabled"; }; watchdog@39000 { @@ -450,7 +480,7 @@ status = "disabled"; msi-parent = <&msi0>; - msi0: msi@18012000 { + msi0: msi-controller { compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; @@ -486,7 +516,7 @@ status = "disabled"; msi-parent = <&msi1>; - msi1: msi@18013000 { + msi1: msi-controller { compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; @@ -522,7 +552,7 @@ status = "disabled"; msi-parent = <&msi2>; - msi2: msi@18014000 { + msi2: msi-controller { compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index 38e6050035bc..a7b5ce133784 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -69,6 +69,12 @@ bus-width = <4>; }; +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; +}; + &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>; @@ -92,3 +98,11 @@ power-domains = <&power RPI_POWER_DOMAIN_VEC>; status = "okay"; }; + +&dsi0 { + power-domains = <&power RPI_POWER_DOMAIN_DSI0>; +}; + +&dsi1 { + power-domains = <&power RPI_POWER_DOMAIN_DSI1>; +}; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index a3106aa446c6..35cea3fcaf5c 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -93,10 +93,13 @@ #clock-cells = <1>; reg = <0x7e101000 0x2000>; - /* CPRMAN derives everything from the platform's - * oscillator. + /* CPRMAN derives almost everything from the + * platform's oscillator. However, the DSI + * pixel clocks come from the DSI analog PHY. */ - clocks = <&clk_osc>; + clocks = <&clk_osc>, + <&dsi0 0>, <&dsi0 1>, <&dsi0 2>, + <&dsi1 0>, <&dsi1 1>, <&dsi1 2>; }; rng@7e104000 { @@ -347,6 +350,16 @@ arm,primecell-periphid = <0x00241011>; }; + sdhost: mmc@7e202000 { + compatible = "brcm,bcm2835-sdhost"; + reg = <0x7e202000 0x100>; + interrupts = <2 24>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + dmas = <&dma 13>; + dma-names = "rx-tx"; + status = "disabled"; + }; + i2s: i2s@7e203000 { compatible = "brcm,bcm2835-i2s"; reg = <0x7e203000 0x20>, @@ -390,6 +403,25 @@ interrupts = <2 14>; /* pwa1 */ }; + dsi0: dsi@7e209000 { + compatible = "brcm,bcm2835-dsi0"; + reg = <0x7e209000 0x78>; + interrupts = <2 4>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + + clocks = <&clocks BCM2835_PLLA_DSI0>, + <&clocks BCM2835_CLOCK_DSI0E>, + <&clocks BCM2835_CLOCK_DSI0P>; + clock-names = "phy", "escape", "pixel"; + + clock-output-names = "dsi0_byte", + "dsi0_ddr2", + "dsi0_ddr"; + + }; + thermal: thermal@7e212000 { compatible = "brcm,bcm2835-thermal"; reg = <0x7e212000 0x8>; @@ -456,6 +488,26 @@ interrupts = <2 1>; }; + dsi1: dsi@7e700000 { + compatible = "brcm,bcm2835-dsi1"; + reg = <0x7e700000 0x8c>; + interrupts = <2 12>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + + clocks = <&clocks BCM2835_PLLD_DSI1>, + <&clocks BCM2835_CLOCK_DSI1E>, + <&clocks BCM2835_CLOCK_DSI1P>; + clock-names = "phy", "escape", "pixel"; + + clock-output-names = "dsi1_byte", + "dsi1_ddr2", + "dsi1_ddr"; + + status = "disabled"; + }; + i2c1: i2c@7e804000 { compatible = "brcm,bcm2835-i2c"; reg = <0x7e804000 0x1000>; @@ -499,6 +551,8 @@ clocks = <&clocks BCM2835_PLLH_PIX>, <&clocks BCM2835_CLOCK_HSM>; clock-names = "pixel", "hdmi"; + dmas = <&dma 17>; + dma-names = "audio-rx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts index d241cee4bfcc..4175174e589a 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts @@ -4,7 +4,17 @@ * * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> * - * Licensed under the GNU/GPL. See COPYING for details. + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH + * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, + * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE + * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. */ /dts-v1/; @@ -31,19 +41,16 @@ usb3 { label = "bcm53xx:blue:usb3"; gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wan { label = "bcm53xx:blue:wan"; gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; lan { label = "bcm53xx:blue:lan"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; power { @@ -61,14 +68,12 @@ 2ghz { label = "bcm53xx:blue:2ghz"; gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb2 { label = "bcm53xx:blue:usb2"; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts index b0e62042f62f..8fa033fea959 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts @@ -4,7 +4,17 @@ * * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> * - * Licensed under the GNU/GPL. See COPYING for details. + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH + * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, + * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE + * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. */ /dts-v1/; @@ -31,7 +41,6 @@ usb2 { label = "bcm53xx:blue:usb2"; gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; power { @@ -49,7 +58,6 @@ usb3 { label = "bcm53xx:blue:usb3"; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts index c9ba6b964b38..62e1427b3f10 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts @@ -52,13 +52,11 @@ usb { label = "bcm53xx:blue:usb"; gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; power0 { label = "bcm53xx:red:power"; gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; power1 { @@ -76,7 +74,6 @@ router1 { label = "bcm53xx:amber:router"; gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan { @@ -88,13 +85,11 @@ wireless0 { label = "bcm53xx:blue:wireless"; gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wireless1 { label = "bcm53xx:amber:wireless"; gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts new file mode 100644 index 000000000000..126ab5867772 --- /dev/null +++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts @@ -0,0 +1,41 @@ +/* + * Copyright (C) 2017 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "linksys,ea6300-v1", "brcm,bcm4708"; + model = "Linksys EA6300 V1"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index b9f66c0fae27..a5647efe4118 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -43,19 +43,16 @@ power1 { label = "bcm53xx:amber:power"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb { label = "bcm53xx:blue:usb"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wireless { label = "bcm53xx:blue:wireless"; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts index ae0199f6c7a2..bb66cebe0bd8 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts @@ -4,7 +4,17 @@ * * Copyright (C) 2014 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> * - * Licensed under the GNU/GPL. See COPYING for details. + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH + * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, + * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE + * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. */ /dts-v1/; @@ -37,7 +47,6 @@ power0 { label = "bcm53xx:green:power"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; power1 { @@ -49,13 +58,11 @@ usb { label = "bcm53xx:blue:usb"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wireless { label = "bcm53xx:blue:wireless"; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts index 36b628b190d7..19ee924d7d53 100644 --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts @@ -37,61 +37,51 @@ power-amber { label = "bcm53xx:amber:power"; gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; usb2 { label = "bcm53xx:white:usb2"; gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; usb3-white { label = "bcm53xx:white:usb3"; gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; usb3-green { label = "bcm53xx:green:usb3"; gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wps { label = "bcm53xx:white:wps"; gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; status-red { label = "bcm53xx:red:status"; gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; status-green { label = "bcm53xx:green:status"; gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; status-blue { label = "bcm53xx:blue:status"; gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan-white { label = "bcm53xx:white:wan"; gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan-red { label = "bcm53xx:red:wan"; gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/bcm4708.dtsi index d0eec099f1f8..1a19e97a987d 100644 --- a/arch/arm/boot/dts/bcm4708.dtsi +++ b/arch/arm/boot/dts/bcm4708.dtsi @@ -12,6 +12,14 @@ / { compatible = "brcm,bcm4708"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts index db8608be0ee7..0800a964f2fe 100644 --- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts +++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts @@ -4,7 +4,17 @@ * * Copyright (C) 2014 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> * - * Licensed under the GNU/GPL. See COPYING for details. + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH + * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, + * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE + * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. */ /dts-v1/; @@ -37,7 +47,6 @@ usb2 { label = "bcm53xx:blue:usb2"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wan { @@ -55,7 +64,6 @@ usb3 { label = "bcm53xx:blue:usb3"; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts index d51586d95b9a..c2af33eb47de 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -4,7 +4,17 @@ * * Copyright (C) 2014 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> * - * Licensed under the GNU/GPL. See COPYING for details. + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH + * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, + * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE + * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. */ /dts-v1/; @@ -58,7 +68,6 @@ power1 { label = "bcm53xx:red:power"; gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; router0 { @@ -70,7 +79,6 @@ router1 { label = "bcm53xx:amber:router"; gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan { @@ -82,13 +90,11 @@ wireless0 { label = "bcm53xx:green:wireless"; gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wireless1 { label = "bcm53xx:amber:wireless"; gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts index de041b8c3342..8bef6429feee 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts @@ -4,7 +4,17 @@ * * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> * - * Licensed under the GNU/GPL. See COPYING for details. + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH + * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, + * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE + * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts new file mode 100644 index 000000000000..a854a5174b7f --- /dev/null +++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts @@ -0,0 +1,98 @@ +/* + * Copyright (C) 2017 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm47081.dtsi" + +/ { + compatible = "tplink,archer-c5-v2", "brcm,bcm47081", "brcm,bcm4708"; + model = "TP-LINK Archer C5 V2"; + + chosen { + bootargs = "earlycon"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + 2ghz { + label = "bcm53xx:green:2ghz"; + gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>; + }; + + lan { + label = "bcm53xx:green:lan"; + gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; + }; + + usb2-port1 { + label = "bcm53xx:green:usb2-port1"; + gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; + }; + + power { + label = "bcm53xx:green:power"; + gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + wan-green { + label = "bcm53xx:green:wan"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + }; + + wps { + label = "bcm53xx:green:wps"; + gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; + }; + + wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; + }; + + 5ghz { + label = "bcm53xx:green:5ghz"; + gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; + }; + + usb2-port2 { + label = "bcm53xx:green:usb2-port2"; + gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + rfkill { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&spi_nor { + status = "okay"; +}; + +&usb2 { + vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm/boot/dts/bcm47081.dtsi b/arch/arm/boot/dts/bcm47081.dtsi index c5f7619af4a6..9829d044aaf4 100644 --- a/arch/arm/boot/dts/bcm47081.dtsi +++ b/arch/arm/boot/dts/bcm47081.dtsi @@ -4,7 +4,17 @@ * * Copyright © 2014 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> * - * Licensed under the GNU/GPL. See COPYING for details. + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH + * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, + * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE + * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. */ #include "bcm5301x.dtsi" @@ -12,6 +22,14 @@ / { compatible = "brcm,bcm47081"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts index eaca6876db0f..df473cc41572 100644 --- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts @@ -4,7 +4,17 @@ * * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> * - * Licensed under the GNU/GPL. See COPYING for details. + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH + * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, + * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE + * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. */ /dts-v1/; @@ -31,7 +41,6 @@ wps { label = "bcm53xx:blue:wps"; gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; power { @@ -43,7 +52,6 @@ wan { label = "bcm53xx:red:wan"; gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts index b32957ca9443..92058c73ee59 100644 --- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts @@ -31,13 +31,11 @@ usb { label = "bcm53xx:green:usb"; gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; power-amber { label = "bcm53xx:amber:power"; gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; power-white { @@ -49,37 +47,31 @@ router-amber { label = "bcm53xx:amber:router"; gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; router-white { label = "bcm53xx:white:router"; gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan-amber { label = "bcm53xx:amber:wan"; gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan-white { label = "bcm53xx:white:wan"; gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wireless-amber { label = "bcm53xx:amber:wireless"; gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wireless-white { label = "bcm53xx:white:wireless"; gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts new file mode 100644 index 000000000000..3d1d9c2c4efc --- /dev/null +++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts @@ -0,0 +1,42 @@ +/* + * Copyright (C) 2017 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm4709.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "linksys,ea9200", "brcm,bcm4709", "brcm,bcm4708"; + model = "Linksys EA9200"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts index f459a98a72c6..f43ab4721456 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts @@ -4,7 +4,17 @@ * * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> * - * Licensed under the GNU/GPL. See COPYING for details. + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH + * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, + * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE + * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. */ /dts-v1/; @@ -37,43 +47,36 @@ power-amber { label = "bcm53xx:amber:power"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 5ghz { label = "bcm53xx:white:5ghz"; gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 2ghz { label = "bcm53xx:white:2ghz"; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wps { label = "bcm53xx:white:wps"; gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wireless { label = "bcm53xx:white:wireless"; gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; usb3 { label = "bcm53xx:white:usb3"; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb2 { label = "bcm53xx:white:usb2"; gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts index 8e39a84e5bf9..d266131652ad 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts @@ -4,7 +4,17 @@ * * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> * - * Licensed under the GNU/GPL. See COPYING for details. + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH + * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, + * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE + * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. */ /dts-v1/; @@ -28,58 +38,61 @@ leds { compatible = "gpio-leds"; - power0 { + power-white { label = "bcm53xx:white:power"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-on"; }; - power1 { + power-amber { label = "bcm53xx:amber:power"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; + }; + + wan-white { + label = "bcm53xx:white:wan"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; }; 5ghz-1 { label = "bcm53xx:white:5ghz-1"; gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 2ghz { label = "bcm53xx:white:2ghz"; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wireless { label = "bcm53xx:white:wireless"; gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wps { label = "bcm53xx:white:wps"; gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; 5ghz-2 { label = "bcm53xx:white:5ghz-2"; gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb3 { label = "bcm53xx:white:usb3"; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb2 { label = "bcm53xx:white:usb2"; gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; @@ -105,6 +118,12 @@ linux,code = <KEY_RESTART>; gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; }; + + brightness { + label = "Backlight"; + linux,code = <KEY_BRIGHTNESS_ZERO>; + gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; + }; }; }; diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts index c67bfaa0c8e8..97aa5d59a1d8 100644 --- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts @@ -26,49 +26,41 @@ lan { label = "bcm53xx:blue:lan"; gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wps { label = "bcm53xx:blue:wps"; gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; 2ghz { label = "bcm53xx:blue:2ghz"; gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; 5ghz { label = "bcm53xx:blue:5ghz"; gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; usb3 { label = "bcm53xx:blue:usb3"; gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; usb2 { label = "bcm53xx:blue:usb2"; gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan-blue { label = "bcm53xx:blue:wan"; gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan-amber { label = "bcm53xx:amber:wan"; gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; power { diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts index 64ded7643e9f..51b0641b5f79 100644 --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -4,7 +4,17 @@ * * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> * - * Licensed under the GNU/GPL. See COPYING for details. + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH + * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, + * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE + * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. */ /dts-v1/; @@ -46,37 +56,31 @@ wan-white { label = "bcm53xx:white:wan"; gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; power-amber { label = "bcm53xx:amber:power"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wan-amber { label = "bcm53xx:amber:wan"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb3-white { label = "bcm53xx:white:usb3"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 2ghz { label = "bcm53xx:white:2ghz"; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 5ghz { label = "bcm53xx:white:5ghz"; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts new file mode 100644 index 000000000000..b6750f70dffb --- /dev/null +++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts @@ -0,0 +1,36 @@ +/* + * Copyright (C) 2017 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm47094.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "linksys,panamera", "brcm,bcm47094", "brcm,bcm4708"; + model = "Linksys EA9500"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts index 5cf4ab1ebe85..5f8621d00c50 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts @@ -34,37 +34,31 @@ lan3 { label = "bcm53xx:green:lan3"; gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; lan4 { label = "bcm53xx:green:lan4"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wan { label = "bcm53xx:green:wan"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; lan1 { label = "bcm53xx:green:lan1"; gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; lan2 { label = "bcm53xx:green:lan2"; gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb3 { label = "bcm53xx:green:usb3"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; status { @@ -76,13 +70,11 @@ 2ghz { label = "bcm53xx:green:2ghz"; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 5ghz { label = "bcm53xx:green:5ghz"; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts index 600795ee1aed..859929973158 100644 --- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts +++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts @@ -34,37 +34,31 @@ power1 { label = "bcm53xx:amber:power"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 5ghz-1 { label = "bcm53xx:white:5ghz-1"; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 5ghz-2 { label = "bcm53xx:white:5ghz-2"; gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 2ghz { label = "bcm53xx:white:2ghz"; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb2 { label = "bcm53xx:white:usb2"; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb3 { label = "bcm53xx:white:usb3"; gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts index 4403ae8790c2..34417dac1cd0 100644 --- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts +++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts @@ -26,19 +26,16 @@ usb { label = "bcm53xx:blue:usb"; gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wps { label = "bcm53xx:blue:wps"; gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; 5ghz { label = "bcm53xx:blue:5ghz"; gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; system { @@ -48,6 +45,15 @@ }; }; + pcie0_leds { + compatible = "gpio-leds"; + + 2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>; + }; + }; + gpio-keys { compatible = "gpio-keys"; #address-cells = <1>; @@ -72,3 +78,30 @@ }; }; }; + +&pcie0 { + ranges = <0x00000000 0 0 0 0 0x00100000>; + #address-cells = <3>; + #size-cells = <2>; + + bridge@0,0,0 { + reg = <0x0000 0 0 0 0>; + ranges = <0x00000000 0 0 0 0 0 0 0x00100000>; + #address-cells = <3>; + #size-cells = <2>; + + wifi@0,1,0 { + reg = <0x0000 0 0 0 0>; + ranges = <0x00000000 0 0 0 0x00100000>; + #address-cells = <1>; + #size-cells = <1>; + + pcie0_chipcommon: chipcommon@0 { + reg = <0 0x1000>; + + gpio-controller; + #gpio-cells = <2>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 00de62dc0042..acee36a61004 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -18,10 +18,6 @@ / { interrupt-parent = <&gic>; - chosen { - stdout-path = &uart0; - }; - chipcommonA { compatible = "simple-bus"; ranges = <0x00000000 0x18000000 0x00001000>; @@ -70,10 +66,19 @@ clocks = <&periph_clk>; }; - local-timer@20600 { + timer@20600 { compatible = "arm,cortex-a9-twd-timer"; - reg = <0x20600 0x100>; - interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>; + reg = <0x20600 0x20>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>; + clocks = <&periph_clk>; + }; + + watchdog@20620 { + compatible = "arm,cortex-a9-twd-wdt"; + reg = <0x20620 0x20>; + interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>; clocks = <&periph_clk>; }; @@ -298,20 +303,6 @@ }; }; - spi@29000 { - reg = <0x00029000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - - spi_nor: spi-nor@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <20000000>; - linux,part-probe = "ofpart", "bcm47xxpart"; - status = "disabled"; - }; - }; - gmac0: ethernet@24000 { reg = <0x24000 0x800>; }; @@ -329,6 +320,16 @@ }; }; + i2c0: i2c@18009000 { + compatible = "brcm,iproc-i2c"; + reg = <0x18009000 0x50>; + interrupts = <GIC_SPI 121 IRQ_TYPE_NONE>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + status = "disabled"; + }; + lcpll0: lcpll0@1800c100 { #clock-cells = <1>; compatible = "brcm,nsp-lcpll0"; @@ -375,4 +376,40 @@ brcm,nand-has-wp; }; + + spi@18029200 { + compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi"; + reg = <0x18029200 0x184>, + <0x18029000 0x124>, + <0x1811b408 0x004>, + <0x180293a0 0x01c>; + reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg"; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "spi_lr_fullness_reached", + "spi_lr_session_aborted", + "spi_lr_impatient", + "spi_lr_session_done", + "spi_lr_overhead", + "mspi_done", + "mspi_halted"; + clocks = <&iprocmed>; + clock-names = "iprocmed"; + num-cs = <2>; + #address-cells = <1>; + #size-cells = <0>; + + spi_nor: spi-nor@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + linux,part-probe = "ofpart", "bcm47xxpart"; + status = "disabled"; + }; + }; }; diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi index 2da04d0a7348..eae623f76401 100644 --- a/arch/arm/boot/dts/bcm53573.dtsi +++ b/arch/arm/boot/dts/bcm53573.dtsi @@ -13,8 +13,12 @@ / { interrupt-parent = <&gic>; + aliases { + serial0 = &uart0; + }; + chosen { - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; }; cpus { @@ -113,6 +117,10 @@ }; }; + pcie0: pcie@2000 { + reg = <0x00002000 0x1000>; + }; + usb2: usb2@4000 { reg = <0x4000 0x1000>; ranges; diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts index 42855a7c1bfa..2e08c895f281 100644 --- a/arch/arm/boot/dts/bcm94708.dts +++ b/arch/arm/boot/dts/bcm94708.dts @@ -38,14 +38,6 @@ model = "NorthStar SVK (BCM94708)"; compatible = "brcm,bcm94708", "brcm,bcm4708"; - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - memory { reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts index 95e8be65f2f1..c37616c67edc 100644 --- a/arch/arm/boot/dts/bcm94709.dts +++ b/arch/arm/boot/dts/bcm94709.dts @@ -38,14 +38,6 @@ model = "NorthStar SVK (BCM94709)"; compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708"; - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - memory { reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts index decd86bae901..40e694bfe5ca 100644 --- a/arch/arm/boot/dts/bcm953012er.dts +++ b/arch/arm/boot/dts/bcm953012er.dts @@ -39,14 +39,6 @@ model = "NorthStar Enterprise Router (BCM953012ER)"; compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708"; - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - memory { reg = <0x00000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/bcm953012hr.dts b/arch/arm/boot/dts/bcm953012hr.dts new file mode 100644 index 000000000000..3076e81699cf --- /dev/null +++ b/arch/arm/boot/dts/bcm953012hr.dts @@ -0,0 +1,97 @@ +/* + * SPDX-License-Identifier: BSD-3-Clause + * + * Copyright(c) 2017 Broadcom + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom nor the names of its contributors + * may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch4.dtsi" + +/ { + model = "NorthStar HR (BCM953012HR)"; + compatible = "brcm,bcm953012hr", "brcm,brcm53012", "brcm,bcm4708"; + + aliases { + ethernet0 = &gmac0; + ethernet1 = &gmac1; + ethernet2 = &gmac2; + }; + + memory@80000000 { + reg = <0x80000000 0x10000000>; + }; +}; + +&nandcs { + partition@0 { + label = "nboot"; + reg = <0x00000000 0x00200000>; + read-only; + }; + partition@200000 { + label = "nenv"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "nsystem"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "nrootfs"; + reg = <0x01000000 0x07000000>; + }; +}; + +&spi_nor { + status = "okay"; + spi-max-frequency = <62500000>; + m25p,default-addr-width = <3>; + + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000d0000>; + }; + partition@d000 { + label = "env"; + reg = <0x000d0000 0x00030000>; + }; + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x00900000>; + }; +}; diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts index ae31a5826e91..79c168e2714b 100644 --- a/arch/arm/boot/dts/bcm953012k.dts +++ b/arch/arm/boot/dts/bcm953012k.dts @@ -43,15 +43,69 @@ serial1 = &uart1; }; - chosen { - stdout-path = "serial0:115200n8"; - }; - memory { reg = <0x80000000 0x10000000>; }; }; +&nand { + nandcs@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partition@0 { + label = "nboot"; + reg = <0x00000000 0x00200000>; + read-only; + }; + partition@200000 { + label = "nenv"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "nsystem"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "nrootfs"; + reg = <0x01000000 0x07000000>; + }; + }; +}; + +&spi_nor { + status = "okay"; + spi-max-frequency = <62500000>; + m25p,default-addr-width = <3>; + + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000d0000>; + }; + partition@d000 { + label = "env"; + reg = <0x000d0000 0x00030000>; + }; + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x00900000>; + }; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts index df05e7f568af..f5c42962c201 100644 --- a/arch/arm/boot/dts/bcm958522er.dts +++ b/arch/arm/boot/dts/bcm958522er.dts @@ -60,7 +60,7 @@ }; }; -/* USB 2/3 support needed to be complete */ +/* USB 3 support needed to be complete */ &amac0 { status = "okay"; @@ -70,6 +70,10 @@ status = "okay"; }; +&ehci0 { + status = "okay"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; @@ -108,6 +112,10 @@ }; }; +&ohci0 { + status = "okay"; +}; + &pcie0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts index 4a3ab19c6281..efcb1f67bdad 100644 --- a/arch/arm/boot/dts/bcm958525er.dts +++ b/arch/arm/boot/dts/bcm958525er.dts @@ -60,7 +60,7 @@ }; }; -/* USB 2/3 support needed to be complete */ +/* USB 3 support needed to be complete */ &amac0 { status = "okay"; @@ -70,6 +70,10 @@ status = "okay"; }; +&ehci0 { + status = "okay"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; @@ -108,6 +112,10 @@ }; }; +&ohci0 { + status = "okay"; +}; + &pcie0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts index 81f78435d8c7..b335ce02e32f 100644 --- a/arch/arm/boot/dts/bcm958525xmc.dts +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -66,7 +66,13 @@ status = "okay"; }; +&ehci0 { + status = "okay"; +}; + &i2c0 { + status = "okay"; + temperature-sensor@4c { compatible = "adi,adt7461a"; reg = <0x4c>; @@ -122,6 +128,10 @@ }; }; +&ohci0 { + status = "okay"; +}; + &pcie0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts index c88b8fefcb2f..16ab2d82a14b 100644 --- a/arch/arm/boot/dts/bcm958622hr.dts +++ b/arch/arm/boot/dts/bcm958622hr.dts @@ -60,7 +60,7 @@ }; }; -/* USB 2/3 and SLIC support needed to be complete */ +/* USB 3 and SLIC support needed to be complete */ &amac0 { status = "okay"; @@ -74,6 +74,10 @@ status = "okay"; }; +&ehci0 { + status = "okay"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; @@ -112,6 +116,10 @@ }; }; +&ohci0 { + status = "okay"; +}; + &pcie0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts index d503fa0dde31..9b921c6aa8f8 100644 --- a/arch/arm/boot/dts/bcm958623hr.dts +++ b/arch/arm/boot/dts/bcm958623hr.dts @@ -60,7 +60,7 @@ }; }; -/* USB 2/3 and SLIC support needed to be complete */ +/* USB 3 and SLIC support needed to be complete */ &amac0 { status = "okay"; @@ -74,6 +74,10 @@ status = "okay"; }; +&ehci0 { + status = "okay"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; @@ -112,6 +116,10 @@ }; }; +&ohci0 { + status = "okay"; +}; + &pcie0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts index cc0363b843c1..006b08e41a3b 100644 --- a/arch/arm/boot/dts/bcm958625hr.dts +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -72,6 +72,10 @@ status = "okay"; }; +&ehci0 { + status = "okay"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; @@ -110,6 +114,10 @@ }; }; +&ohci0 { + status = "okay"; +}; + &pcie0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts index f8d47e517e18..64740f85cf4c 100644 --- a/arch/arm/boot/dts/bcm958625k.dts +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -65,6 +65,10 @@ status = "okay"; }; +&ehci0 { + status = "okay"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; @@ -103,6 +107,10 @@ }; }; +&ohci0 { + status = "okay"; +}; + &pcie0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts index 74e15a3cd9f8..bce251a68591 100644 --- a/arch/arm/boot/dts/bcm988312hr.dts +++ b/arch/arm/boot/dts/bcm988312hr.dts @@ -60,7 +60,7 @@ }; }; -/* USB 2/3 support needed to be complete */ +/* USB 3 support needed to be complete */ &amac0 { status = "okay"; @@ -74,6 +74,10 @@ status = "okay"; }; +&ehci0 { + status = "okay"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; @@ -112,6 +116,10 @@ }; }; +&ohci0 { + status = "okay"; +}; + &pcie0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index d15107cba765..8d244cd76c36 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -9,6 +9,7 @@ */ /dts-v1/; #include "da850.dtsi" +#include <dt-bindings/gpio/gpio.h> / { compatible = "ti,da850-evm", "ti,da850"; @@ -78,7 +79,10 @@ DRVDD-supply = <&vbat>; DVDD-supply = <&vbat>; }; - + tca6416: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + }; }; wdt: wdt@21000 { status = "okay"; @@ -293,20 +297,27 @@ &vpif { pinctrl-names = "default"; - pinctrl-0 = <&vpif_capture_pins>; + pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>; status = "okay"; /* VPIF capture port */ - port { - vpif_ch0: endpoint@0 { - reg = <0>; - bus-width = <8>; + port@0 { + vpif_input_ch0: endpoint@0 { + reg = <0>; + bus-width = <8>; }; - vpif_ch1: endpoint@1 { - reg = <1>; - bus-width = <8>; - data-shift = <8>; + vpif_input_ch1: endpoint@1 { + reg = <1>; + bus-width = <8>; + data-shift = <8>; + }; + }; + + /* VPIF display port */ + port@1 { + vpif_output_ch0: endpoint { + bus-width = <8>; }; }; }; diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts index 112ec92064ce..512604ad8b71 100644 --- a/arch/arm/boot/dts/da850-lego-ev3.dts +++ b/arch/arm/boot/dts/da850-lego-ev3.dts @@ -123,6 +123,14 @@ pinctrl-0 = <&system_power_pin>; }; + sound { + compatible = "pwm-beeper"; + pinctrl-names = "default"; + pinctrl-0 = <&ehrpwm0b_pins>; + pwms = <&ehrpwm0 1 1000000 0>; + amp-supply = <&>; + }; + /* * This is a 5V current limiting regulator that is shared by USB, * the sensor (input) ports, the motor (output) ports and the A/DC. @@ -139,18 +147,36 @@ enable-active-high; regulator-boot-on; }; + + /* + * This is a simple voltage divider on VCC5V to provide a 2.5V + * reference signal to the ADC. + */ + adc_ref: regulator2 { + compatible = "regulator-fixed"; + regulator-name = "adc ref"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-boot-on; + vin-supply = <&vcc5v>; + }; + + /* + * This is the amplifier for the speaker. + */ + amp: regulator3 { + pinctrl-names = "default"; + pinctrl-0 = <&_pins>; + compatible = "regulator-fixed"; + regulator-name = "amp"; + gpio = <&gpio 111 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; }; &pmx_core { status = "okay"; - spi0_cs3_pin: pinmux_spi0_cs3_pin { - pinctrl-single,bits = < - /* CS3 */ - 0xc 0x01000000 0x0f000000 - >; - }; - mmc0_cd_pin: pinmux_mmc0_cd { pinctrl-single,bits = < /* GP5[14] */ @@ -195,6 +221,13 @@ 0x4c 0x00008000 0x0000f000 >; }; + + amp_pins: pinmux_amp_pins { + pinctrl-single,bits = < + /* GP6[15] */ + 0x34 0x00000008 0x0000000f + >; + }; }; &pinconf { @@ -293,6 +326,18 @@ }; }; }; + + adc: adc@3 { + compatible = "ti,ads7957"; + reg = <3>; + #io-channel-cells = <1>; + spi-max-frequency = <10000000>; + vref-supply = <&adc_ref>; + }; +}; + +&ehrpwm0 { + status = "okay"; }; &gpio { diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 92d633d1da68..941d455000a7 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -153,6 +153,12 @@ 0x10 0x00000010 0x000000f0 >; }; + spi0_cs3_pin: pinmux_spi0_cs3_pin { + pinctrl-single,bits = < + /* CS3 */ + 0xc 0x01000000 0x0f000000 + >; + }; spi1_pins: pinmux_spi1_pins { pinctrl-single,bits = < /* SIMO, SOMI, CLK */ @@ -216,8 +222,21 @@ 0x3c 0x11111111 0xffffffff /* VP_DIN[8..9] */ 0x40 0x00000011 0x000000ff - /* VP_CLKIN3, VP_CLKIN2 */ - 0x4c 0x00010100 0x000f0f00 + >; + }; + vpif_display_pins: vpif_display_pins { + pinctrl-single,bits = < + /* VP_DOUT[2..7] */ + 0x40 0x11111100 0xffffff00 + /* VP_DOUT[10..15,0..1] */ + 0x44 0x11111111 0xffffffff + /* VP_DOUT[8..9] */ + 0x48 0x00000011 0x000000ff + /* + * VP_CLKOUT3, VP_CLKIN3, + * VP_CLKOUT2, VP_CLKIN2 + */ + 0x4c 0x00111100 0x00ffff00 >; }; }; @@ -345,7 +364,13 @@ status = "disabled"; /* VPIF capture port */ - port { + port@0 { + #address-cells = <1>; + #size-cells = <0>; + }; + + /* VPIF display port */ + port@1 { #address-cells = <1>; #size-cells = <0>; }; diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts index 0bf55fa72dea..1865976db5f9 100644 --- a/arch/arm/boot/dts/dm8168-evm.dts +++ b/arch/arm/boot/dts/dm8168-evm.dts @@ -25,6 +25,12 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + sata_refclk: fixedclock0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; }; &dm816x_pinmux { @@ -173,3 +179,7 @@ pinctrl-0 = <&usb1_pins>; mentor,multipoint = <0>; }; + +&sata { + clocks = <&sysclk5_ck>, <&sata_refclk>; +}; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index 276211e1ee53..59cbf958fcc3 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -293,6 +293,13 @@ phy-handle = <&phy1>; }; + sata: sata@4a140000 { + compatible = "ti,dm816-ahci"; + reg = <0x4a140000 0x10000>; + interrupts = <16>; + ti,hwmods = "sata"; + }; + mcspi1: spi@48030000 { compatible = "ti,omap4-mcspi"; reg = <0x48030000 0x1000>; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index bbfb9d5a70a9..57892f264cea 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -81,11 +81,7 @@ compatible = "arm,cortex-a15"; reg = <0>; - operating-points = < - /* kHz uV */ - 1000000 1060000 - 1176000 1160000 - >; + operating-points-v2 = <&cpu0_opp_table>; clocks = <&dpll_mpu_ck>; clock-names = "cpu"; @@ -99,6 +95,24 @@ }; }; + cpu0_opp_table: opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_wkup>; + + opp_nom@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1060000 850000 1150000>; + opp-supported-hw = <0xFF 0x01>; + opp-suspend; + }; + + opp_od@1176000000 { + opp-hz = /bits/ 64 <1176000000>; + opp-microvolt = <1160000 885000 1160000>; + opp-supported-hw = <0xFF 0x02>; + }; + }; + /* * The soc node represents the soc top level view. It is used for IPs * that are not memory mapped in the MPU view or for the MPU itself. @@ -1984,6 +1998,23 @@ &cpu_thermal { polling-delay = <500>; /* milliseconds */ + coefficients = <0 2000>; +}; + +&gpu_thermal { + coefficients = <0 2000>; +}; + +&core_thermal { + coefficients = <0 2000>; +}; + +&dspeve_thermal { + coefficients = <0 2000>; +}; + +&iva_thermal { + coefficients = <0 2000>; }; /include/ "dra7xx-clocks.dtsi" diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index 0a78347e6615..24e6746c5b26 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -17,6 +17,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <1>; + operating-points-v2 = <&cpu0_opp_table>; }; }; @@ -79,6 +80,10 @@ }; }; +&cpu0_opp_table { + opp-shared; +}; + &dss { reg = <0x58000000 0x80>, <0x58004054 0x4>, diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 548413e23c47..c9f191ca7b9c 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -215,6 +215,8 @@ &dsi_0 { vddcore-supply = <&ldo6_reg>; vddio-supply = <&ldo6_reg>; + samsung,burst-clock-frequency = <250000000>; + samsung,esc-clock-frequency = <20000000>; samsung,pll-clock-frequency = <24000000>; status = "okay"; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 9c28ef4508e0..590ee442d0ae 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -745,23 +745,23 @@ compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; opp-microvolt = <800000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <800000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <800000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <825000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <875000>; }; @@ -835,23 +835,23 @@ compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; opp-microvolt = <900000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; opp-microvolt = <900000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <1000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <1000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <1000000>; }; @@ -861,19 +861,19 @@ compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; }; }; @@ -882,19 +882,19 @@ compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; }; }; @@ -903,13 +903,13 @@ compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; }; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 84fcdff140ae..497a9470c888 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -283,15 +283,6 @@ }; }; - watchdog: watchdog@10060000 { - compatible = "samsung,s3c2410-wdt"; - reg = <0x10060000 0x100>; - interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_WDT>; - clock-names = "watchdog"; - status = "disabled"; - }; - rtc: rtc@10070000 { compatible = "samsung,s3c6410-rtc"; reg = <0x10070000 0x100>; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index a2c6a13fe67b..312650e2450f 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -328,7 +328,3 @@ &tmu { status = "okay"; }; - -&watchdog { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 0ca1b4d355f2..1743ca850070 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -197,6 +197,8 @@ &dsi_0 { vddcore-supply = <&vusb_reg>; vddio-supply = <&vmipi_reg>; + samsung,burst-clock-frequency = <500000000>; + samsung,esc-clock-frequency = <20000000>; samsung,pll-clock-frequency = <24000000>; status = "okay"; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index f9408188f97f..768fb075b1fd 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -119,6 +119,14 @@ }; }; + watchdog: watchdog@10060000 { + compatible = "samsung,s3c6410-wdt"; + reg = <0x10060000 0x100>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_WDT>; + clock-names = "watchdog"; + }; + clock: clock-controller@10030000 { compatible = "samsung,exynos4210-clock"; reg = <0x10030000 0x20000>; @@ -335,15 +343,15 @@ compatible = "operating-points-v2"; opp-shared; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <1025000>; }; - opp@267000000 { + opp-267000000 { opp-hz = /bits/ 64 <267000000>; opp-microvolt = <1050000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1150000>; }; @@ -353,13 +361,13 @@ compatible = "operating-points-v2"; opp-shared; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; }; @@ -368,10 +376,10 @@ compatible = "operating-points-v2"; opp-shared; - opp@5000000 { + opp-5000000 { opp-hz = /bits/ 64 <5000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; }; @@ -380,10 +388,10 @@ compatible = "operating-points-v2"; opp-shared; - opp@10000000 { + opp-10000000 { opp-hz = /bits/ 64 <10000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; }; @@ -392,13 +400,13 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; }; }; @@ -407,13 +415,13 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; }; diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi index a36cd36a26b8..4cd62487bb16 100644 --- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi +++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi @@ -495,7 +495,3 @@ vtmu-supply = <&ldo16_reg>; status = "okay"; }; - -&watchdog { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 78f118cb73d4..0f1ff792fe44 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -555,7 +555,3 @@ vtmu-supply = <&ldo10_reg>; status = "okay"; }; - -&watchdog { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index a1ab6f94bb64..7a83e2df18a6 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -541,7 +541,3 @@ &serial_3 { status = "okay"; }; - -&watchdog { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/exynos4412-prime.dtsi b/arch/arm/boot/dts/exynos4412-prime.dtsi index e75bc170c89c..a67bd953d754 100644 --- a/arch/arm/boot/dts/exynos4412-prime.dtsi +++ b/arch/arm/boot/dts/exynos4412-prime.dtsi @@ -20,12 +20,12 @@ }; &cpu0_opp_table { - opp@1600000000 { + opp-1600000000 { opp-hz = /bits/ 64 <1600000000>; opp-microvolt = <1350000>; clock-latency-ns = <200000>; }; - opp@1704000000 { + opp-1704000000 { opp-hz = /bits/ 64 <1704000000>; opp-microvolt = <1350000>; clock-latency-ns = <200000>; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 41ecd6d465a7..82221a00444d 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -385,6 +385,8 @@ &dsi_0 { vddcore-supply = <&ldo8_reg>; vddio-supply = <&ldo10_reg>; + samsung,burst-clock-frequency = <500000000>; + samsung,esc-clock-frequency = <20000000>; samsung,pll-clock-frequency = <24000000>; status = "okay"; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 235bbb69ad7c..7ff03a7e8fb9 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -76,73 +76,73 @@ compatible = "operating-points-v2"; opp-shared; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <900000>; clock-latency-ns = <200000>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <900000>; clock-latency-ns = <200000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <925000>; clock-latency-ns = <200000>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <950000>; clock-latency-ns = <200000>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <975000>; clock-latency-ns = <200000>; }; - opp@700000000 { + opp-700000000 { opp-hz = /bits/ 64 <700000000>; opp-microvolt = <987500>; clock-latency-ns = <200000>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = <1000000>; clock-latency-ns = <200000>; opp-suspend; }; - opp@900000000 { + opp-900000000 { opp-hz = /bits/ 64 <900000000>; opp-microvolt = <1037500>; clock-latency-ns = <200000>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <1087500>; clock-latency-ns = <200000>; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1137500>; clock-latency-ns = <200000>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1187500>; clock-latency-ns = <200000>; }; - opp@1300000000 { + opp-1300000000 { opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1250000>; clock-latency-ns = <200000>; }; - opp@1400000000 { + opp-1400000000 { opp-hz = /bits/ 64 <1400000000>; opp-microvolt = <1287500>; clock-latency-ns = <200000>; }; - cpu0_opp_1500: opp@1500000000 { + cpu0_opp_1500: opp-1500000000 { opp-hz = /bits/ 64 <1500000000>; opp-microvolt = <1350000>; clock-latency-ns = <200000>; @@ -215,6 +215,15 @@ }; }; + watchdog: watchdog@10060000 { + compatible = "samsung,exynos5250-wdt"; + reg = <0x10060000 0x100>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_WDT>; + clock-names = "watchdog"; + samsung,syscon-phandle = <&pmu_system_controller>; + }; + adc: adc@126C0000 { compatible = "samsung,exynos-adc-v1"; reg = <0x126C0000 0x100>; @@ -433,23 +442,23 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <900000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <900000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; opp-microvolt = <900000>; }; - opp@267000000 { + opp-267000000 { opp-hz = /bits/ 64 <267000000>; opp-microvolt = <950000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1050000>; }; @@ -459,16 +468,16 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; }; - opp@267000000 { + opp-267000000 { opp-hz = /bits/ 64 <267000000>; }; }; @@ -525,19 +534,19 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <900000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <925000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; opp-microvolt = <950000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <1000000>; }; @@ -547,10 +556,10 @@ compatible = "operating-points-v2"; opp-shared; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; }; @@ -559,10 +568,10 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; }; @@ -571,10 +580,10 @@ compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; }; diff --git a/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi new file mode 100644 index 000000000000..c8771c660550 --- /dev/null +++ b/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi @@ -0,0 +1,25 @@ +/* + * Device tree sources for Exynos5420 TMU sensor configuration + * + * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> + * Copyright (c) 2017 Krzysztof Kozlowski <krzk@kernel.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <dt-bindings/thermal/thermal_exynos.h> + +#thermal-sensor-cells = <0>; +samsung,tmu_gain = <8>; +samsung,tmu_reference_voltage = <16>; +samsung,tmu_noise_cancel_mode = <4>; +samsung,tmu_efuse_value = <55>; +samsung,tmu_min_efuse_value = <0>; +samsung,tmu_max_efuse_value = <100>; +samsung,tmu_first_point_trim = <25>; +samsung,tmu_second_point_trim = <85>; +samsung,tmu_default_temp_offset = <50>; +samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 7dc9dc82afd8..0db0bcf8da36 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -49,62 +49,62 @@ cluster_a15_opp_table: opp_table0 { compatible = "operating-points-v2"; opp-shared; - opp@1800000000 { + opp-1800000000 { opp-hz = /bits/ 64 <1800000000>; opp-microvolt = <1250000>; clock-latency-ns = <140000>; }; - opp@1700000000 { + opp-1700000000 { opp-hz = /bits/ 64 <1700000000>; opp-microvolt = <1212500>; clock-latency-ns = <140000>; }; - opp@1600000000 { + opp-1600000000 { opp-hz = /bits/ 64 <1600000000>; opp-microvolt = <1175000>; clock-latency-ns = <140000>; }; - opp@1500000000 { + opp-1500000000 { opp-hz = /bits/ 64 <1500000000>; opp-microvolt = <1137500>; clock-latency-ns = <140000>; }; - opp@1400000000 { + opp-1400000000 { opp-hz = /bits/ 64 <1400000000>; opp-microvolt = <1112500>; clock-latency-ns = <140000>; }; - opp@1300000000 { + opp-1300000000 { opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1062500>; clock-latency-ns = <140000>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1037500>; clock-latency-ns = <140000>; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1012500>; clock-latency-ns = <140000>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = < 987500>; clock-latency-ns = <140000>; }; - opp@900000000 { + opp-900000000 { opp-hz = /bits/ 64 <900000000>; opp-microvolt = < 962500>; clock-latency-ns = <140000>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = < 937500>; clock-latency-ns = <140000>; }; - opp@700000000 { + opp-700000000 { opp-hz = /bits/ 64 <700000000>; opp-microvolt = < 912500>; clock-latency-ns = <140000>; @@ -114,42 +114,42 @@ cluster_a7_opp_table: opp_table1 { compatible = "operating-points-v2"; opp-shared; - opp@1300000000 { + opp-1300000000 { opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1275000>; clock-latency-ns = <140000>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1212500>; clock-latency-ns = <140000>; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1162500>; clock-latency-ns = <140000>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <1112500>; clock-latency-ns = <140000>; }; - opp@900000000 { + opp-900000000 { opp-hz = /bits/ 64 <900000000>; opp-microvolt = <1062500>; clock-latency-ns = <140000>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = <1025000>; clock-latency-ns = <140000>; }; - opp@700000000 { + opp-700000000 { opp-hz = /bits/ 64 <700000000>; opp-microvolt = <975000>; clock-latency-ns = <140000>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <937500>; clock-latency-ns = <140000>; @@ -699,7 +699,7 @@ interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #include "exynos5420-tmu-sensor-conf.dtsi" }; tmu_cpu1: tmu@10064000 { @@ -708,7 +708,7 @@ interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #include "exynos5420-tmu-sensor-conf.dtsi" }; tmu_cpu2: tmu@10068000 { @@ -717,7 +717,7 @@ interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>, <&clock CLK_TMU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #include "exynos5420-tmu-sensor-conf.dtsi" }; tmu_cpu3: tmu@1006c000 { @@ -726,7 +726,7 @@ interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #include "exynos5420-tmu-sensor-conf.dtsi" }; tmu_gpu: tmu@100a0000 { @@ -735,7 +735,7 @@ interrupts = <0 215 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #include "exynos5420-tmu-sensor-conf.dtsi" }; sysmmu_g2dr: sysmmu@0x10A60000 { diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 77d35bb92950..a4ea018464fc 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -189,7 +189,7 @@ }; watchdog@110000 { - compatible = "samsung,s3c2410-wdt"; + compatible = "samsung,s3c6410-wdt"; reg = <0x110000 0x1000>; interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_B_125>; @@ -290,11 +290,22 @@ clock-names = "usbhost"; }; + pcie_phy0: pcie-phy@270000 { + #phy-cells = <0>; + compatible = "samsung,exynos5440-pcie-phy"; + reg = <0x270000 0x1000>, <0x271000 0x40>; + }; + + pcie_phy1: pcie-phy@272000 { + #phy-cells = <0>; + compatible = "samsung,exynos5440-pcie-phy"; + reg = <0x272000 0x1000>, <0x271040 0x40>; + }; + pcie_0: pcie@290000 { compatible = "samsung,exynos5440-pcie", "snps,dw-pcie"; - reg = <0x290000 0x1000 - 0x270000 0x1000 - 0x271000 0x40>; + reg = <0x290000 0x1000>, <0x40000000 0x1000>; + reg-names = "elbi", "config"; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; @@ -303,8 +314,8 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - ranges = <0x00000800 0 0x40000000 0x40000000 0 0x00001000 /* configuration space */ - 0x81000000 0 0 0x40001000 0 0x00010000 /* downstream I/O */ + phys = <&pcie_phy0>; + ranges = <0x81000000 0 0 0x40001000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; @@ -315,9 +326,8 @@ pcie_1: pcie@2a0000 { compatible = "samsung,exynos5440-pcie", "snps,dw-pcie"; - reg = <0x2a0000 0x1000 - 0x272000 0x1000 - 0x271040 0x40>; + reg = <0x2a0000 0x1000>, <0x60000000 0x1000>; + reg-names = "elbi", "config"; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; @@ -326,8 +336,8 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - ranges = <0x00000800 0 0x60000000 0x60000000 0 0x00001000 /* configuration space */ - 0x81000000 0 0 0x60001000 0 0x00010000 /* downstream I/O */ + phys = <&pcie_phy1>; + ranges = <0x81000000 0 0 0x60001000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi index 8213016803e5..9ddb6bacac5a 100644 --- a/arch/arm/boot/dts/exynos5800.dtsi +++ b/arch/arm/boot/dts/exynos5800.dtsi @@ -24,60 +24,60 @@ }; &cluster_a15_opp_table { - opp@1700000000 { + opp-1700000000 { opp-microvolt = <1250000>; }; - opp@1600000000 { + opp-1600000000 { opp-microvolt = <1250000>; }; - opp@1500000000 { + opp-1500000000 { opp-microvolt = <1100000>; }; - opp@1400000000 { + opp-1400000000 { opp-microvolt = <1100000>; }; - opp@1300000000 { + opp-1300000000 { opp-microvolt = <1100000>; }; - opp@1200000000 { + opp-1200000000 { opp-microvolt = <1000000>; }; - opp@1100000000 { + opp-1100000000 { opp-microvolt = <1000000>; }; - opp@1000000000 { + opp-1000000000 { opp-microvolt = <1000000>; }; - opp@900000000 { + opp-900000000 { opp-microvolt = <1000000>; }; - opp@800000000 { + opp-800000000 { opp-microvolt = <900000>; }; - opp@700000000 { + opp-700000000 { opp-microvolt = <900000>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <900000>; clock-latency-ns = <140000>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <900000>; clock-latency-ns = <140000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <900000>; clock-latency-ns = <140000>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <900000>; clock-latency-ns = <140000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <900000>; clock-latency-ns = <140000>; @@ -85,46 +85,46 @@ }; &cluster_a7_opp_table { - opp@1300000000 { + opp-1300000000 { opp-microvolt = <1250000>; }; - opp@1200000000 { + opp-1200000000 { opp-microvolt = <1250000>; }; - opp@1100000000 { + opp-1100000000 { opp-microvolt = <1250000>; }; - opp@1000000000 { + opp-1000000000 { opp-microvolt = <1100000>; }; - opp@900000000 { + opp-900000000 { opp-microvolt = <1100000>; }; - opp@800000000 { + opp-800000000 { opp-microvolt = <1100000>; }; - opp@700000000 { + opp-700000000 { opp-microvolt = <1000000>; }; - opp@600000000 { + opp-600000000 { opp-microvolt = <1000000>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <1000000>; clock-latency-ns = <140000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1000000>; clock-latency-ns = <140000>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <900000>; clock-latency-ns = <140000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <900000>; clock-latency-ns = <140000>; diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts new file mode 100644 index 000000000000..7668ba52158e --- /dev/null +++ b/arch/arm/boot/dts/gemini-nas4220b.dts @@ -0,0 +1,102 @@ +/* + * Device Tree file for the Gemini-based Raidsonic NAS IB-4220-B + */ + +/dts-v1/; + +#include "gemini.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Raidsonic NAS IB-4220-B"; + compatible = "raidsonic,ib-4220-b", "cortina,gemini"; + #address-cells = <1>; + #size-cells = <1>; + + memory { /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,19200n8"; + stdout-path = &uart0; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@29 { + debounce_interval = <50>; + wakeup-source; + linux,code = <KEY_SETUP>; + label = "Backup button"; + gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + }; + button@31 { + debounce_interval = <50>; + wakeup-source; + linux,code = <KEY_RESTART>; + label = "Softreset button"; + gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + led@28 { + label = "nas4220b:orange:hdd"; + gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + led@30 { + label = "nas4220b:green:os"; + gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + }; + + soc { + flash@30000000 { + status = "okay"; + /* 16MB of flash */ + reg = <0x30000000 0x01000000>; + + partition@0 { + label = "RedBoot"; + reg = <0x00000000 0x00020000>; + read-only; + }; + partition@20000 { + label = "Kernel"; + reg = <0x00020000 0x00300000>; + }; + partition@320000 { + label = "Ramdisk"; + reg = <0x00320000 0x00600000>; + }; + partition@920000 { + label = "Application"; + reg = <0x00920000 0x00600000>; + }; + partition@f20000 { + label = "VCTL"; + reg = <0x00f20000 0x00020000>; + read-only; + }; + partition@f40000 { + label = "CurConf"; + reg = <0x00f40000 0x000a0000>; + read-only; + }; + partition@fe0000 { + label = "FIS directory"; + reg = <0x00fe0000 0x00020000>; + read-only; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/gemini-rut1xx.dts b/arch/arm/boot/dts/gemini-rut1xx.dts new file mode 100644 index 000000000000..7b920bfbda32 --- /dev/null +++ b/arch/arm/boot/dts/gemini-rut1xx.dts @@ -0,0 +1,65 @@ +/* + * Device Tree file for Teltonika RUT1xx + */ + +/dts-v1/; + +#include "gemini.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Teltonika RUT1xx"; + compatible = "teltonika,rut1xx", "cortina,gemini"; + #address-cells = <1>; + #size-cells = <1>; + + memory { /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@28 { + debounce_interval = <50>; + wakeup-source; + linux,code = <KEY_SETUP>; + label = "Reset to defaults"; + gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + led@7 { + /* FIXME: add the LED color */ + label = "rut1xx::gsm"; + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + led@31 { + /* FIXME: add the LED color */ + label = "rut1xx::power"; + gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; + }; + + soc { + flash@30000000 { + status = "okay"; + /* 8MB of flash */ + reg = <0x30000000 0x00800000>; + /* TODO: add flash partitions here */ + }; + }; +}; diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts new file mode 100644 index 000000000000..46309e79cc7b --- /dev/null +++ b/arch/arm/boot/dts/gemini-sq201.dts @@ -0,0 +1,118 @@ +/* + * Device Tree file for ITian Square One SQ201 NAS + */ + +/dts-v1/; + +#include "gemini.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "ITian Square One SQ201"; + compatible = "itian,sq201", "cortina,gemini"; + #address-cells = <1>; + #size-cells = <1>; + + memory { /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@18 { + debounce_interval = <50>; + wakeup-source; + linux,code = <KEY_SETUP>; + label = "factory reset"; + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + led@20 { + label = "sq201:green:info"; + gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + led@31 { + label = "sq201:green:usb"; + gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "usb-host"; + }; + }; + + soc { + flash@30000000 { + status = "okay"; + /* 16MB of flash */ + reg = <0x30000000 0x01000000>; + + partition@0 { + label = "RedBoot"; + reg = <0x00000000 0x00120000>; + read-only; + }; + partition@120000 { + label = "Kernel"; + reg = <0x00120000 0x00200000>; + }; + partition@320000 { + label = "Ramdisk"; + reg = <0x00320000 0x00600000>; + }; + partition@920000 { + label = "Application"; + reg = <0x00920000 0x00600000>; + }; + partition@f20000 { + label = "VCTL"; + reg = <0x00f20000 0x00020000>; + read-only; + }; + partition@f40000 { + label = "CurConf"; + reg = <0x00f40000 0x000a0000>; + read-only; + }; + partition@fe0000 { + label = "FIS directory"; + reg = <0x00fe0000 0x00020000>; + read-only; + }; + }; + + pci@50000000 { + status = "okay"; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = + <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ + <0x4800 0 0 2 &pci_intc 1>, + <0x4800 0 0 3 &pci_intc 2>, + <0x4800 0 0 4 &pci_intc 3>, + <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ + <0x5000 0 0 2 &pci_intc 2>, + <0x5000 0 0 3 &pci_intc 3>, + <0x5000 0 0 4 &pci_intc 0>, + <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ + <0x5800 0 0 2 &pci_intc 3>, + <0x5800 0 0 3 &pci_intc 0>, + <0x5800 0 0 4 &pci_intc 1>, + <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ + <0x6000 0 0 2 &pci_intc 0>, + <0x6000 0 0 3 &pci_intc 1>, + <0x6000 0 0 4 &pci_intc 2>; + }; + }; +}; diff --git a/arch/arm/boot/dts/gemini-wbd111.dts b/arch/arm/boot/dts/gemini-wbd111.dts new file mode 100644 index 000000000000..63b756e3bf5a --- /dev/null +++ b/arch/arm/boot/dts/gemini-wbd111.dts @@ -0,0 +1,102 @@ +/* + * Device Tree file for Wiliboard WBD-111 + */ + +/dts-v1/; + +#include "gemini.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Wiliboard WBD-111"; + compatible = "wiliboard,wbd111", "cortina,gemini"; + #address-cells = <1>; + #size-cells = <1>; + + memory { /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@5 { + debounce_interval = <50>; + wakeup-source; + linux,code = <KEY_SETUP>; + label = "reset"; + gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led@1 { + label = "wbd111:red:L3"; + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@2 { + label = "wbd111:green:L4"; + gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@3 { + label = "wbd111:red:L4"; + gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@5 { + label = "wbd111:green:L3"; + gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + }; + + soc { + flash@30000000 { + status = "okay"; + /* 8MB of flash */ + reg = <0x30000000 0x00800000>; + + partition@0 { + label = "RedBoot"; + reg = <0x00000000 0x00020000>; + read-only; + }; + partition@20000 { + label = "kernel"; + reg = <0x00020000 0x00100000>; + }; + partition@120000 { + label = "rootfs"; + reg = <0x00120000 0x006a0000>; + }; + partition@7c0000 { + label = "VCTL"; + reg = <0x007c0000 0x00010000>; + read-only; + }; + partition@7d0000 { + label = "cfg"; + reg = <0x007d0000 0x00010000>; + read-only; + }; + partition@7e0000 { + label = "FIS"; + reg = <0x007e0000 0x00010000>; + read-only; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/gemini-wbd222.dts b/arch/arm/boot/dts/gemini-wbd222.dts new file mode 100644 index 000000000000..9747f5a47807 --- /dev/null +++ b/arch/arm/boot/dts/gemini-wbd222.dts @@ -0,0 +1,102 @@ +/* + * Device Tree file for Wiliboard WBD-222 + */ + +/dts-v1/; + +#include "gemini.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Wiliboard WBD-222"; + compatible = "wiliboard,wbd222", "cortina,gemini"; + #address-cells = <1>; + #size-cells = <1>; + + memory { /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@5 { + debounce_interval = <50>; + wakeup-source; + linux,code = <KEY_SETUP>; + label = "reset"; + gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led@1 { + label = "wbd111:red:L3"; + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@2 { + label = "wbd111:green:L4"; + gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@3 { + label = "wbd111:red:L4"; + gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@5 { + label = "wbd111:green:L3"; + gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + }; + + soc { + flash@30000000 { + status = "okay"; + /* 8MB of flash */ + reg = <0x30000000 0x00800000>; + + partition@0 { + label = "RedBoot"; + reg = <0x00000000 0x00020000>; + read-only; + }; + partition@20000 { + label = "kernel"; + reg = <0x00020000 0x00100000>; + }; + partition@120000 { + label = "rootfs"; + reg = <0x00120000 0x006a0000>; + }; + partition@7c0000 { + label = "VCTL"; + reg = <0x007c0000 0x00010000>; + read-only; + }; + partition@7d0000 { + label = "cfg"; + reg = <0x007d0000 0x00010000>; + read-only; + }; + partition@7e0000 { + label = "FIS"; + reg = <0x007e0000 0x00010000>; + read-only; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi new file mode 100644 index 000000000000..b8d011bdcc76 --- /dev/null +++ b/arch/arm/boot/dts/gemini.dtsi @@ -0,0 +1,156 @@ +/* + * Device Tree file for Cortina systems Gemini SoC + */ + +/include/ "skeleton.dtsi" + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + interrupt-parent = <&intcon>; + + flash@30000000 { + compatible = "cortina,gemini-flash", "cfi-flash"; + syscon = <&syscon>; + bank-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + }; + + syscon: syscon@40000000 { + compatible = "cortina,gemini-syscon", "syscon", "simple-mfd"; + reg = <0x40000000 0x1000>; + + syscon-reboot { + compatible = "syscon-reboot"; + regmap = <&syscon>; + /* GLOBAL_RESET register */ + offset = <0x0c>; + /* RESET_GLOBAL | RESET_CPU1 */ + mask = <0xC0000000>; + }; + }; + + watchdog@41000000 { + compatible = "cortina,gemini-watchdog"; + reg = <0x41000000 0x1000>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; + }; + + uart0: serial@42000000 { + compatible = "ns16550a"; + reg = <0x42000000 0x100>; + clock-frequency = <48000000>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + }; + + timer@43000000 { + compatible = "cortina,gemini-timer"; + reg = <0x43000000 0x1000>; + interrupt-parent = <&intcon>; + interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */ + <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */ + <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */ + syscon = <&syscon>; + }; + + rtc@45000000 { + compatible = "cortina,gemini-rtc"; + reg = <0x45000000 0x100>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; + }; + + intcon: interrupt-controller@48000000 { + compatible = "faraday,ftintc010"; + reg = <0x48000000 0x1000>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + power-controller@4b000000 { + compatible = "cortina,gemini-power-controller"; + reg = <0x4b000000 0x100>; + interrupts = <26 IRQ_TYPE_EDGE_RISING>; + }; + + gpio0: gpio@4d000000 { + compatible = "cortina,gemini-gpio", "faraday,ftgpio010"; + reg = <0x4d000000 0x100>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@4e000000 { + compatible = "cortina,gemini-gpio", "faraday,ftgpio010"; + reg = <0x4e000000 0x100>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@4f000000 { + compatible = "cortina,gemini-gpio", "faraday,ftgpio010"; + reg = <0x4f000000 0x100>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pci@50000000 { + compatible = "cortina,gemini-pci", "faraday,ftpci100"; + /* + * The first 256 bytes in the IO range is actually used + * to configure the host bridge. + */ + reg = <0x50000000 0x100>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + status = "disabled"; + + bus-range = <0x00 0xff>; + /* PCI ranges mappings */ + ranges = + /* 1MiB I/O space 0x50000000-0x500fffff */ + <0x01000000 0 0 0x50000000 0 0x00100000>, + /* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */ + <0x02000000 0 0x58000000 0x58000000 0 0x08000000>; + + /* DMA ranges */ + dma-ranges = + /* 128MiB at 0x00000000-0x07ffffff */ + <0x02000000 0 0x00000000 0x00000000 0 0x08000000>, + /* 64MiB at 0x00000000-0x03ffffff */ + <0x02000000 0 0x00000000 0x00000000 0 0x04000000>, + /* 64MiB at 0x00000000-0x03ffffff */ + <0x02000000 0 0x00000000 0x00000000 0 0x04000000>; + + /* + * This PCI host bridge variant has a cascaded interrupt + * controller embedded in the host bridge. + */ + pci_intc: interrupt-controller { + interrupt-parent = <&intcon>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts index 9300711f1ea3..db39bd6b8e00 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts @@ -179,8 +179,6 @@ }; &usbotg { - phy_type = "utmi"; - dr_mode = "otg"; external-vbus-divider; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index 70292101ba03..d921dd2ed676 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -309,8 +309,6 @@ }; &usbotg { - phy_type = "utmi"; - dr_mode = "otg"; external-vbus-divider; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h index f840f03ad171..6c63dca1b9b8 100644 --- a/arch/arm/boot/dts/imx25-pinfunc.h +++ b/arch/arm/boot/dts/imx25-pinfunc.h @@ -17,8 +17,6 @@ * <mux_reg conf_reg input_reg mux_mode input_val> */ -#define MX25_PAD_TDO__TDO 0x000 0x3e8 0x000 0x00 0x000 - #define MX25_PAD_A10__A10 0x008 0x000 0x000 0x00 0x000 #define MX25_PAD_A10__GPIO_4_0 0x008 0x000 0x000 0x05 0x000 @@ -68,7 +66,6 @@ #define MX25_PAD_A22__A22 0x030 0x000 0x000 0x00 0x000 #define MX25_PAD_A22__GPIO_2_8 0x030 0x000 0x000 0x05 0x000 -#define MX25_PAD_A22__FEC_TDATA2 0x030 0x000 0x000 0x07 0x000 #define MX25_PAD_A22__SIM2_VEN1 0x030 0x000 0x000 0x06 0x000 #define MX25_PAD_A22__FEC_TDATA2 0x030 0x000 0x000 0x07 0x000 @@ -542,6 +539,8 @@ #define MX25_PAD_RTCK__OWIRE 0x1ec 0x3e4 0x000 0x01 0x000 #define MX25_PAD_RTCK__GPIO_3_14 0x1ec 0x3e4 0x000 0x05 0x000 +#define MX25_PAD_TDO__TDO 0x000 0x3e8 0x000 0x00 0x000 + #define MX25_PAD_DE_B__DE_B 0x1f0 0x3ec 0x000 0x00 0x000 #define MX25_PAD_DE_B__GPIO_2_20 0x1f0 0x3ec 0x000 0x05 0x000 diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index e0ba55016a04..0cdf333336cd 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -93,6 +93,11 @@ reg = <0x43f00000 0x100000>; ranges; + aips1: bridge@43f00000 { + compatible = "fsl,imx25-aips"; + reg = <0x43f00000 0x4000>; + }; + i2c1: i2c@43f80000 { #address-cells = <1>; #size-cells = <0>; @@ -342,6 +347,11 @@ reg = <0x53f00000 0x100000>; ranges; + aips2: bridge@53f00000 { + compatible = "fsl,imx25-aips"; + reg = <0x53f00000 0x4000>; + }; + clks: ccm@53f80000 { compatible = "fsl,imx25-ccm"; reg = <0x53f80000 0x4000>; @@ -544,6 +554,8 @@ clock-names = "ipg", "ahb", "per"; fsl,usbmisc = <&usbmisc 0>; fsl,usbphy = <&usbphy0>; + phy_type = "utmi"; + dr_mode = "otg"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-485.dts b/arch/arm/boot/dts/imx28-duckbill-2-485.dts new file mode 100644 index 000000000000..bd3fd470f9c3 --- /dev/null +++ b/arch/arm/boot/dts/imx28-duckbill-2-485.dts @@ -0,0 +1,189 @@ +/* + * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com> + * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include "imx28.dtsi" + +/ { + model = "I2SE Duckbill 2 485"; + compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28"; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_8bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + bus-width = <8>; + vmmc-supply = <®_3p3v>; + status = "okay"; + non-removable; + }; + + ssp2: ssp@80014000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pins_b + &mmc2_cd_cfg &mmc2_sck_cfg_b>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mac0_phy_reset_pin: mac0-phy-reset@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mac0_phy_int_pin: mac0-phy-int@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + led_pins: leds@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SAIF0_MCLK__GPIO_3_20 + MX28_PAD_SAIF0_LRCLK__GPIO_3_21 + MX28_PAD_I2C0_SCL__GPIO_3_24 + MX28_PAD_I2C0_SDA__GPIO_3_25 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + }; + }; + + apbx@80040000 { + lradc@80050000 { + status = "okay"; + }; + + auart0: serial@8006a000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; + }; + + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + + usbphy0: usbphy@8007c000 { + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb0: usb@80080000 { + status = "okay"; + dr_mode = "peripheral"; + }; + + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; + phy-supply = <®_3p3v>; + phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; + phy-reset-duration = <25>; + phy-handle = <ðphy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_phy_int_pin>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + max-speed = <100>; + }; + }; + }; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + status-red { + label = "duckbill:red:status"; + gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + status-green { + label = "duckbill:green:status"; + gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + rs485-red { + label = "duckbill:red:rs485"; + gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; + }; + + rs485-green { + label = "duckbill:green:rs485"; + gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts new file mode 100644 index 000000000000..4450047885eb --- /dev/null +++ b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts @@ -0,0 +1,220 @@ +/* + * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com> + * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "imx28.dtsi" + +/ { + model = "I2SE Duckbill 2 EnOcean"; + compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28"; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_8bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + bus-width = <8>; + vmmc-supply = <®_3p3v>; + status = "okay"; + non-removable; + }; + + ssp2: ssp@80014000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pins_b + &mmc2_cd_cfg &mmc2_sck_cfg_b>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mac0_phy_reset_pin: mac0-phy-reset@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mac0_phy_int_pin: mac0-phy-int@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + led_pins: leds@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SAIF0_MCLK__GPIO_3_20 + MX28_PAD_SAIF0_LRCLK__GPIO_3_21 + MX28_PAD_AUART0_CTS__GPIO_3_2 + MX28_PAD_I2C0_SCL__GPIO_3_24 + MX28_PAD_I2C0_SDA__GPIO_3_25 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + enocean_button: enocean-button@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_AUART0_RTS__GPIO_3_3 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + }; + }; + + apbx@80040000 { + lradc@80050000 { + status = "okay"; + }; + + auart0: serial@8006a000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; + }; + + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + + usbphy0: usbphy@8007c000 { + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb0: usb@80080000 { + status = "okay"; + dr_mode = "peripheral"; + }; + + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; + phy-supply = <®_3p3v>; + phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; + phy-reset-duration = <25>; + phy-handle = <ðphy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_phy_int_pin>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + max-speed = <100>; + }; + }; + }; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + status-red { + label = "duckbill:red:status"; + gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + status-green { + label = "duckbill:green:status"; + gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + enocean-blue { + label = "duckbill:blue:enocean"; + gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; + }; + + enocean-red { + label = "duckbill:red:enocean"; + gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; + }; + + enocean-green { + label = "duckbill:green:enocean"; + gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&enocean_button>; + + enocean { + label = "EnOcean"; + linux,code = <KEY_NEW>; + gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts new file mode 100644 index 000000000000..927732efca98 --- /dev/null +++ b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts @@ -0,0 +1,199 @@ +/* + * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com> + * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include "imx28.dtsi" + +/ { + model = "I2SE Duckbill 2 SPI"; + compatible = "i2se,duckbill-2-spi", "i2se,duckbill-2", "fsl,imx28"; + + aliases { + ethernet1 = &qca7000; + }; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_8bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + bus-width = <8>; + vmmc-supply = <®_3p3v>; + status = "okay"; + non-removable; + }; + + ssp2: ssp@80014000 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + + qca7000: ethernet@0 { + reg = <0>; + compatible = "qca,qca7000"; + pinctrl-names = "default"; + pinctrl-0 = <&qca7000_pins>; + interrupt-parent = <&gpio3>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + spi-cpha; + spi-cpol; + spi-max-frequency = <8000000>; + }; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mac0_phy_reset_pin: mac0-phy-reset@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mac0_phy_int_pin: mac0-phy-int@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + led_pins: led@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SAIF0_MCLK__GPIO_3_20 + MX28_PAD_SAIF0_LRCLK__GPIO_3_21 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + qca7000_pins: qca7000@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_AUART0_RTS__GPIO_3_3 /* Interrupt */ + MX28_PAD_LCD_D13__GPIO_1_13 /* QCA7K reset */ + MX28_PAD_LCD_D14__GPIO_1_14 /* GPIO 0 */ + MX28_PAD_LCD_D15__GPIO_1_15 /* GPIO 1 */ + MX28_PAD_LCD_D18__GPIO_1_18 /* GPIO 2 */ + MX28_PAD_LCD_D21__GPIO_1_21 /* GPIO 3 */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + }; + }; + + apbx@80040000 { + lradc@80050000 { + status = "okay"; + }; + + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + + usbphy0: usbphy@8007c000 { + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb0: usb@80080000 { + status = "okay"; + dr_mode = "peripheral"; + }; + + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; + phy-supply = <®_3p3v>; + phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; + phy-reset-duration = <25>; + phy-handle = <ðphy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_phy_int_pin>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + max-speed = <100>; + }; + }; + }; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + status-red { + label = "duckbill:red:status"; + gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + status-green { + label = "duckbill:green:status"; + gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx28-duckbill-2.dts b/arch/arm/boot/dts/imx28-duckbill-2.dts new file mode 100644 index 000000000000..7fa3d759505c --- /dev/null +++ b/arch/arm/boot/dts/imx28-duckbill-2.dts @@ -0,0 +1,183 @@ +/* + * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com> + * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include "imx28.dtsi" + +/ { + model = "I2SE Duckbill 2"; + compatible = "i2se,duckbill-2", "fsl,imx28"; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_8bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + bus-width = <8>; + vmmc-supply = <®_3p3v>; + status = "okay"; + non-removable; + }; + + ssp2: ssp@80014000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pins_b + &mmc2_cd_cfg &mmc2_sck_cfg_b>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mac0_phy_reset_pin: mac0-phy-reset@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mac0_phy_int_pin: mac0-phy-int@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + led_pins: leds@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SAIF0_MCLK__GPIO_3_20 + MX28_PAD_SAIF0_LRCLK__GPIO_3_21 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + }; + }; + + apbx@80040000 { + lradc@80050000 { + status = "okay"; + }; + + i2c0: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + + auart0: serial@8006a000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; + }; + + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + + usbphy0: usbphy@8007c000 { + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb0: usb@80080000 { + status = "okay"; + dr_mode = "peripheral"; + }; + + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; + phy-supply = <®_3p3v>; + phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; + phy-reset-duration = <25>; + phy-handle = <ðphy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_phy_int_pin>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + max-speed = <100>; + }; + }; + }; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + status-red { + label = "duckbill:red:status"; + gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + status-green { + label = "duckbill:green:status"; + gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts index ce1a7effba37..3e4385d4ed78 100644 --- a/arch/arm/boot/dts/imx28-duckbill.dts +++ b/arch/arm/boot/dts/imx28-duckbill.dts @@ -1,5 +1,6 @@ /* - * Copyright (C) 2013 Michael Heimpold <mhei@heimpold.de> + * Copyright (C) 2013-2014,2016 Michael Heimpold <mhei@heimpold.de> + * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License @@ -10,6 +11,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "imx28.dtsi" / { @@ -32,6 +34,13 @@ status = "okay"; }; + ssp2: ssp@80014000 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + }; + pinctrl@80018000 { pinctrl-names = "default"; pinctrl-0 = <&hog_pins_a>; @@ -39,14 +48,24 @@ hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < - MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */ + MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mac0_phy_reset_pin: mac0-phy-reset@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */ >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; - led_pins_a: led_gpio@0 { + led_pins: leds@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_AUART1_RX__GPIO_3_4 @@ -60,6 +79,22 @@ }; apbx@80040000 { + lradc@80050000 { + status = "okay"; + }; + + i2c0: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + + auart0: serial@8006a000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; + }; + duart: serial@80074000 { pinctrl-names = "default"; pinctrl-0 = <&duart_pins_a>; @@ -75,47 +110,43 @@ ahb@80080000 { usb0: usb@80080000 { status = "okay"; + dr_mode = "peripheral"; }; mac0: ethernet@800f0000 { phy-mode = "rmii"; pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; + pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; phy-supply = <®_3p3v>; phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; - phy-reset-duration = <100>; + phy-reset-duration = <25>; status = "okay"; }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_3p3v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; }; leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&led_pins_a>; + pinctrl-0 = <&led_pins>; - status { - label = "duckbill:green:status"; - gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>; - }; - - failure { + status-red { label = "duckbill:red:status"; gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + status-green { + label = "duckbill:green:status"; + gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; }; }; }; diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts index 2df63bee6f4e..bb5329479c62 100644 --- a/arch/arm/boot/dts/imx28-m28cu3.dts +++ b/arch/arm/boot/dts/imx28-m28cu3.dts @@ -57,7 +57,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc2_4bit_pins_a &mmc2_cd_cfg - &mmc2_sck_cfg>; + &mmc2_sck_cfg_a>; bus-width = <4>; vmmc-supply = <®_vddio_sd1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 148fcf4d3b98..2f4ebe0318d3 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -590,6 +590,22 @@ fsl,pull-up = <MXS_PULL_ENABLE>; }; + mmc2_4bit_pins_b: mmc2-4bit@1 { + reg = <1>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SCK__SSP2_SCK + MX28_PAD_SSP2_MOSI__SSP2_CMD + MX28_PAD_SSP2_MISO__SSP2_D0 + MX28_PAD_SSP2_SS0__SSP2_D3 + MX28_PAD_SSP2_SS1__SSP2_D1 + MX28_PAD_SSP2_SS2__SSP2_D2 + MX28_PAD_AUART1_RX__SSP2_CARD_DETECT + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + mmc2_cd_cfg: mmc2-cd-cfg { fsl,pinmux-ids = < MX28_PAD_AUART1_RX__SSP2_CARD_DETECT @@ -597,7 +613,8 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; - mmc2_sck_cfg: mmc2-sck-cfg { + mmc2_sck_cfg_a: mmc2-sck-cfg@0 { + reg = <0>; fsl,pinmux-ids = < MX28_PAD_SSP0_DATA7__SSP2_SCK >; @@ -605,6 +622,15 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; + mmc2_sck_cfg_b: mmc2-sck-cfg@1 { + reg = <1>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SCK__SSP2_SCK + >; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + i2c0_pins_a: i2c0@0 { reg = <0>; fsl,pinmux-ids = < diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index ceae909e2201..2a98afcd8a4e 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -109,7 +109,7 @@ ranges; esdhc1: esdhc@50004000 { - compatible = "fsl,imx50-esdhc"; + compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc"; reg = <0x50004000 0x4000>; interrupts = <1>; clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>, @@ -121,7 +121,7 @@ }; esdhc2: esdhc@50008000 { - compatible = "fsl,imx50-esdhc"; + compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc"; reg = <0x50008000 0x4000>; interrupts = <2>; clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>, @@ -170,7 +170,7 @@ }; esdhc3: esdhc@50020000 { - compatible = "fsl,imx50-esdhc"; + compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc"; reg = <0x50020000 0x4000>; interrupts = <3>; clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>, @@ -182,7 +182,7 @@ }; esdhc4: esdhc@50024000 { - compatible = "fsl,imx50-esdhc"; + compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc"; reg = <0x50024000 0x4000>; interrupts = <4>; clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>, diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index f4c158cce908..d3d662e37677 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -88,8 +88,8 @@ }; ldo7_reg: ldo7 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3600000>; + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; }; ldo8_reg: ldo8 { diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts index 479ca4c9e384..de2215832372 100644 --- a/arch/arm/boot/dts/imx53-qsrb.dts +++ b/arch/arm/boot/dts/imx53-qsrb.dts @@ -128,8 +128,8 @@ vdac_reg: vdac { regulator-name = "VDAC"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2775000>; + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; }; vgen1_reg: vgen1 { diff --git a/arch/arm/boot/dts/imx6dl-gw5903.dts b/arch/arm/boot/dts/imx6dl-gw5903.dts new file mode 100644 index 000000000000..103261ea9334 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-gw5903.dts @@ -0,0 +1,55 @@ +/* + * Copyright 2017 Gateworks Corporation + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-gw5903.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 Duallite/Solo GW5903"; + compatible = "gw,imx6dl-gw5903", "gw,ventana", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-gw5904.dts b/arch/arm/boot/dts/imx6dl-gw5904.dts new file mode 100644 index 000000000000..9c6d3cd3d6a7 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-gw5904.dts @@ -0,0 +1,55 @@ +/* + * Copyright 2017 Gateworks Corporation + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-gw5904.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 DualLite/Solo GW5904"; + compatible = "gw,imx6dl-gw5904", "gw,ventana", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts index 116bebb5e435..404a93d9596b 100644 --- a/arch/arm/boot/dts/imx6q-b450v3.dts +++ b/arch/arm/boot/dts/imx6q-b450v3.dts @@ -104,4 +104,11 @@ output-low; line-name = "PCA9539-P05"; }; + + P07 { + gpio-hog; + gpios = <7 0>; + output-low; + line-name = "PCA9539-P07"; + }; }; diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts index 33f5c436c09f..7f9f176901d4 100644 --- a/arch/arm/boot/dts/imx6q-b650v3.dts +++ b/arch/arm/boot/dts/imx6q-b650v3.dts @@ -97,6 +97,13 @@ output-low; line-name = "PCA9539-P05"; }; + + P07 { + gpio-hog; + gpios = <7 0>; + output-low; + line-name = "PCA9539-P07"; + }; }; &usbphy1 { diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts index d78514c92349..2c1e98e0cf7b 100644 --- a/arch/arm/boot/dts/imx6q-b850v3.dts +++ b/arch/arm/boot/dts/imx6q-b850v3.dts @@ -72,6 +72,14 @@ fsl,data-mapping = "spwg"; fsl,data-width = <24>; status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&stdp4028_in>; + }; + }; }; }; @@ -142,3 +150,65 @@ reg = <0x4a>; }; }; + +&mux2_i2c2 { + clock-frequency = <100000>; + + stdp2690@72 { + compatible = "megachips,stdp2690-ge-b850v3-fw"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + stdp2690_in: endpoint { + remote-endpoint = <&stdp4028_out>; + }; + }; + + port@1 { + reg = <1>; + + stdp2690_out: endpoint { + /* Connector for external display */ + }; + }; + }; + }; + + stdp4028@73 { + compatible = "megachips,stdp4028-ge-b850v3-fw"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + interrupt-parent = <&gpio2>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + stdp4028_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@1 { + reg = <1>; + + stdp4028_out: endpoint { + remote-endpoint = <&stdp2690_in>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi index 36d6bb39593a..c90b26f00e24 100644 --- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi @@ -102,7 +102,7 @@ m25_eeprom: m25p80@0 { compatible = "atmel,at25"; - spi-max-frequency = <20000000>; + spi-max-frequency = <10000000>; size = <0x8000>; pagesize = <64>; reg = <0>; @@ -183,20 +183,6 @@ interrupt-parent = <&gpio2>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; - P06 { - gpio-hog; - gpios = <6 0>; - output-low; - line-name = "PCA9539-P06"; - }; - - P07 { - gpio-hog; - gpios = <7 0>; - output-low; - line-name = "PCA9539-P07"; - }; - P10 { gpio-hog; gpios = <8 0>; diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts index d8a5789a4bc8..66cac5328b86 100644 --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts @@ -43,6 +43,7 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/sound/fsl-imx-audmux.h> #include "imx6q.dtsi" / { @@ -90,6 +91,34 @@ enable-active-high; }; + sound-analog { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board analog audio"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line Out", + "Microphone", "Mic Jack", + "Line", "Line In"; + simple-audio-card,routing = + "Headphone Jack", "RHPOUT", + "Headphone Jack", "LHPOUT", + "MICIN", "Mic Bias", + "Mic Bias", "Mic Jack"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + simple-audio-card,bitclock-inversion; + + sound_master: simple-audio-card,cpu { + sound-dai = <&ssi2>; + system-clock-frequency = <2822400>; + }; + + simple-audio-card,codec { + sound-dai = <&wm8731>; + }; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; @@ -99,6 +128,36 @@ }; }; +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; + + ssi2 { + fsl,audmux-port = <1>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_RCLKDIR | + IMX_AUDMUX_V2_PTCR_RCSEL(3 | 0x8) | + IMX_AUDMUX_V2_PTCR_TCLKDIR | + IMX_AUDMUX_V2_PTCR_TCSEL(3)) + IMX_AUDMUX_V2_PDCR_RXDSEL(3) + >; + }; + + audmux4 { + fsl,audmux-port = <3>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TFSEL(1) | + IMX_AUDMUX_V2_PTCR_RCLKDIR | + IMX_AUDMUX_V2_PTCR_RCSEL(1 | 0x8) | + IMX_AUDMUX_V2_PTCR_TCLKDIR | + IMX_AUDMUX_V2_PTCR_TCSEL(1)) + IMX_AUDMUX_V2_PDCR_RXDSEL(1) + >; + }; +}; + &cpu0 { /* * Although the imx6q fuse indicates that 1.2GHz operation is possible, @@ -160,9 +219,25 @@ reg = <0x50>; pagesize = <16>; }; + + wm8731: codec@1a { + #sound-dai-cells = <0>; + compatible = "wlf,wm8731"; + reg = <0x1a>; + }; }; &iomuxc { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__AUD4_RXC 0x17059 + MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x17059 + MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x17059 + MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x17059 + MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x17059 + >; + }; + pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 @@ -279,6 +354,14 @@ status = "okay"; }; +&ssi2 { + assigned-clocks = <&clks IMX6QDL_CLK_SSI2_SEL>, + <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <0>, <786432000>; + status = "okay"; +}; + &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4>; diff --git a/arch/arm/boot/dts/imx6q-gw5903.dts b/arch/arm/boot/dts/imx6q-gw5903.dts new file mode 100644 index 000000000000..a182e4cb0e6e --- /dev/null +++ b/arch/arm/boot/dts/imx6q-gw5903.dts @@ -0,0 +1,55 @@ +/* + * Copyright 2017 Gateworks Corporation + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-gw5903.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 Dual/Quad GW5903"; + compatible = "gw,imx6q-gw5903", "gw,ventana", "fsl,imx6q"; +}; diff --git a/arch/arm/boot/dts/imx6q-gw5904.dts b/arch/arm/boot/dts/imx6q-gw5904.dts new file mode 100644 index 000000000000..ca1e2ae3341e --- /dev/null +++ b/arch/arm/boot/dts/imx6q-gw5904.dts @@ -0,0 +1,59 @@ +/* + * Copyright 2017 Gateworks Corporation + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-gw5904.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 Dual/Quad GW5904"; + compatible = "gw,imx6q-gw5904", "gw,ventana", "fsl,imx6q"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap10.dts b/arch/arm/boot/dts/imx6q-icore-ofcap10.dts new file mode 100644 index 000000000000..49b60ca20e6d --- /dev/null +++ b/arch/arm/boot/dts/imx6q-icore-ofcap10.dts @@ -0,0 +1,76 @@ +/* + * Copyright (C) 2016 Amarula Solutions B.V. + * Copyright (C) 2016 Engicam S.r.l. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-icore.dtsi" + +/ { + model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 10.1 Kit"; + compatible = "engicam,imx6-icore", "fsl,imx6q"; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <24>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <60000000>; + hactive = <1280>; + vactive = <800>; + hback-porch = <40>; + hfront-porch = <40>; + vback-porch = <10>; + vfront-porch = <3>; + hsync-len = <80>; + vsync-len = <10>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap12.dts b/arch/arm/boot/dts/imx6q-icore-ofcap12.dts new file mode 100644 index 000000000000..9e230f56c5fb --- /dev/null +++ b/arch/arm/boot/dts/imx6q-icore-ofcap12.dts @@ -0,0 +1,76 @@ +/* + * Copyright (C) 2016 Amarula Solutions B.V. + * Copyright (C) 2016 Engicam S.r.l. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-icore.dtsi" + +/ { + model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 12 Kit"; + compatible = "engicam,imx6-icore", "fsl,imx6q"; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <46800000>; + hactive = <1280>; + vactive = <480>; + hback-porch = <353>; + hfront-porch = <47>; + vback-porch = <39>; + vfront-porch = <4>; + hsync-len = <8>; + vsync-len = <2>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-icore.dts b/arch/arm/boot/dts/imx6q-icore.dts index 59eb7adc2472..5613dd9dc469 100644 --- a/arch/arm/boot/dts/imx6q-icore.dts +++ b/arch/arm/boot/dts/imx6q-icore.dts @@ -57,3 +57,37 @@ &can2 { status = "okay"; }; + +&i2c1 { + max11801: touchscreen@48 { + compatible = "maxim,max11801"; + reg = <0x48>; + interrupt-parent = <&gpio3>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <60000000>; + hactive = <800>; + vactive = <480>; + hback-porch = <30>; + hfront-porch = <30>; + vback-porch = <5>; + vfront-porch = <5>; + hsync-len = <64>; + vsync-len = <20>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts index 69bdd82ce21f..d900ad6ec5f8 100644 --- a/arch/arm/boot/dts/imx6q-utilite-pro.dts +++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts @@ -101,9 +101,11 @@ hdmi-connector { compatible = "hdmi-connector"; - + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hpd>; type = "a"; ddc-i2c-bus = <&i2c_dvi_ddc>; + hpd-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; port { hdmi_connector_in: endpoint { @@ -209,6 +211,12 @@ >; }; + pinctrl_hpd: hpdgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 diff --git a/arch/arm/boot/dts/imx6q-zii-rdu2.dts b/arch/arm/boot/dts/imx6q-zii-rdu2.dts new file mode 100644 index 000000000000..b2d346640fd7 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-zii-rdu2.dts @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2016-2017 Zodiac Inflight Innovations + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include <imx6q.dtsi> +#include <imx6qdl-zii-rdu2.dtsi> + +/ { + model = "ZII RDU2 Board"; + compatible = "zii,imx6q-zii-rdu2", "fsl,imx6q"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi new file mode 100644 index 000000000000..444425153fc7 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi @@ -0,0 +1,654 @@ +/* + * Copyright 2017 Gateworks Corporation + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + chosen { + stdout-path = &uart2; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = < + 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100 + >; + default-brightness-level = <100>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led0: user1 { + label = "user1"; + gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ + default-state = "off"; + }; + }; + + memory { + reg = <0x10000000 0x40000000>; + }; + + reg_5p0v: regulator-5p0v { + compatible = "regulator-fixed"; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 30 0>; + enable-active-high; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_12p0: regulator-12p0v { + compatible = "regulator-fixed"; + regulator-name = "12P0V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sound { + compatible = "fsl,imx-audio-tlv320"; + model = "imx-tlv320"; + ssi-controller = <&ssi1>; + audio-codec = <&tlv320aic3105>; + /* routing of sink, source */ + audio-routing = + /* TLV320 LINE1L pin <-> Mic Jack connector */ + "LINE1L", "Mic Jack", + /* board Headphone Jack <-> HPOUT */ + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "Mic Jack", "Mic Bias"; + mux-int-port = <1>; + mux-ext-port = <6>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pca9555: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + eeprom1: eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom2: eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom3: eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom4: eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + dts1672: rtc@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + reg = <0x3c>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + regulators { + /* VDD_1P8 (1+R1/R2 = 2.505): Aud/eMMC/microSD/Touch */ + reg_1p8v: sw1 { + regulator-name = "vdd1p8"; + regulator-min-microvolt = <1033310>; + regulator-max-microvolt = <2004000>; + lltc,fb-voltage-divider = <301000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_DDR (1+R1/R2 = 2.105) */ + reg_vdd_ddr: sw2 { + regulator-name = "vddddr"; + regulator-min-microvolt = <868310>; + regulator-max-microvolt = <1684000>; + lltc,fb-voltage-divider = <221000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_ARM (1+R1/R2 = 1.635) */ + reg_vdd_arm: sw3 { + regulator-name = "vddarm"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + linux,phandle = <®_vdd_arm>; + }; + + /* VDD_SOC (1+R1/R2 = 1.635) */ + reg_vdd_soc: sw4 { + regulator-name = "vddsoc"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + linux,phandle = <®_vdd_soc>; + }; + + /* VDD_1P0 (1+R1/R2 = 1.38): */ + reg_1p0v: ldo2 { + regulator-name = "vdd1p0"; + regulator-min-microvolt = <1002777>; + regulator-max-microvolt = <1002777>; + lltc,fb-voltage-divider = <100000 261000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_HIGH (1+R1/R2 = 4.17) */ + reg_3p0v: ldo4 { + regulator-name = "vdd3p0"; + regulator-min-microvolt = <3023250>; + regulator-max-microvolt = <3023250>; + lltc,fb-voltage-divider = <634000 200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + tlv320aic3105: codec@18 { + compatible = "ti,tlv320aic3x"; + reg = <0x18>; + gpio-reset = <&gpio5 17 GPIO_ACTIVE_LOW>; + clocks = <&clks IMX6QDL_CLK_CKO>; + ai3x-micbias-vg = <2>; /* MICBIAS_2_5V */ + /* Regulators */ + DRVDD-supply = <®_3p3v>; + AVDD-supply = <®_3p3v>; + IOVDD-supply = <®_3p3v>; + DVDD-supply = <®_1p8v>; + }; + + accelerometer@1d { + compatible = "fsl,mma8451"; + reg = <0x1d>; + interrupt-parent = <&gpio7>; + interrupts = <11 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT2"; + }; + + /* headphone detect */ + ts3a227e@3b { + compatible = "ti,ts3a227e"; + reg = <0x3b>; + interrupt-parent = <&gpio5>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + ti,micbias = <4>; /* 2.5V micbias */ + }; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: g101evn010 { + clock-frequency = <68930000>; + hactive = <1280>; + vactive = <800>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1_200mhz>; + vmmc-supply = <®_3p3v>; + non-removable; + bus-width = <4>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_3p3v>; + max-frequency = <100000000>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + non-removable; + vmmc-supply = <®_3p3v>; + keep-power-in-suspend; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; +}; + +&iomuxc { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x130b0 + MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x130b0 + MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x130b0 + MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* MCK */ + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x4001b0b0 /* PHY_RST# */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x4001b0b0 /* PHY_EN */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */ + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + /* I2C3 */ + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + + /* Headphone Detect */ + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x0001b0b0 /* HPDET_IRQ# */ + MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x0001b0b0 /* HPDET_MIC# */ + + /* Codec */ + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x0001b0b0 /* CODEC_RST# */ + + /* Touch Controller */ + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x0001b0b0 /* TOUCH_IRQ# */ + MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x0001b0b0 /* TOUCH_RST */ + + /* Stow Sensor */ + MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x0001b0b0 /* ACCEL_IRQ2 */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x0001b0b0 /* ACCEL_IRQ1 */ + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x1b0b1 /* TXEN */ + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x4001b0b0 /* PWR_EN */ + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */ + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x4001b0b0 /* EMMY_EN */ + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x4001b0b0 /* EMMY_CFG1# */ + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x4001b0b0 /* EMMY_CFG2# */ + MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x0001b0b0 /* EMMY_BTWAKE# */ + MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x0001b0b0 /* EMMY_WFWAKE# */ + + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9 + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x100f9 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x17059 /* CD */ + MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x17059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x170b9 /* CD */ + MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x170f9 /* CD */ + MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x170f9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x100b9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x100f9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi new file mode 100644 index 000000000000..fd4b68be9fe9 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi @@ -0,0 +1,641 @@ +/* + * Copyright 2017 Gateworks Corporation + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + /* these are used by bootloader for disabling nodes */ + aliases { + led0 = &led0; + led1 = &led1; + led2 = &led2; + usb0 = &usbh1; + usb1 = &usbotg; + }; + + chosen { + stdout-path = &uart2; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led0: user1 { + label = "user1"; + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led1: user2 { + label = "user2"; + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ + default-state = "off"; + }; + + led2: user3 { + label = "user3"; + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ + default-state = "off"; + }; + }; + + memory { + reg = <0x10000000 0x40000000>; + }; + + pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + }; + + reg_1p0v: regulator-1p0v { + compatible = "regulator-fixed"; + regulator-name = "1P0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&fec>; + }; + }; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pca9555: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + eeprom1: eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom2: eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom3: eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom4: eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + dts1672: rtc@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + reg = <0x3c>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + regulators { + /* VDD_SOC (1+R1/R2 = 1.635) */ + reg_vdd_soc: sw1 { + regulator-name = "vddsoc"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_1P8 (1+R1/R2 = 2.505): GbE switch */ + reg_1p8v: sw2 { + regulator-name = "vdd1p8"; + regulator-min-microvolt = <1033310>; + regulator-max-microvolt = <2004000>; + lltc,fb-voltage-divider = <301000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_ARM (1+R1/R2 = 1.635) */ + reg_vdd_arm: sw3 { + regulator-name = "vddarm"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_DDR (1+R1/R2 = 2.105) */ + reg_vdd_ddr: sw4 { + regulator-name = "vddddr"; + regulator-min-microvolt = <868310>; + regulator-max-microvolt = <1684000>; + lltc,fb-voltage-divider = <221000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */ + reg_2p5v: ldo2 { + regulator-name = "vdd2p5"; + regulator-min-microvolt = <2490375>; + regulator-max-microvolt = <2490375>; + lltc,fb-voltage-divider = <487000 200000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_HIGH (1+R1/R2 = 4.17) */ + reg_3p0v: ldo4 { + regulator-name = "vdd3p0"; + regulator-min-microvolt = <3023250>; + regulator-max-microvolt = <3023250>; + lltc,fb-voltage-divider = <634000 200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + egalax_ts: touchscreen@4 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio1>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + }; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ + status = "disabled"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ + status = "disabled"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + uart-has-rtscts; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + non-removable; + vmmc-supply = <®_3p3v>; + keep-power-in-suspend; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x4001b0b0 /* PHY_RST# */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */ + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 /* PMIC_IRQ# */ + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */ + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x100b9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x100f9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi index 55bebfc9ad94..56d0c5d21cd0 100644 --- a/arch/arm/boot/dts/imx6qdl-icore.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi @@ -48,6 +48,13 @@ reg = <0x10000000 0x80000000>; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 100000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + }; + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "3P3V"; @@ -136,6 +143,12 @@ status = "okay"; }; +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4>; @@ -246,6 +259,12 @@ >; }; + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 63bf95ed8c88..58055ceec6dc 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -548,6 +548,18 @@ status = "okay"; }; +®_arm { + vin-supply = <&sw1a_reg>; +}; + +®_pu { + vin-supply = <&sw1c_reg>; +}; + +®_soc { + vin-supply = <&sw1c_reg>; +}; + &snvs_poweroff { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi new file mode 100644 index 000000000000..5d94b5ee6aa0 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -0,0 +1,932 @@ +/* + * Copyright (C) 2016-2017 Zodiac Inflight Innovations + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/sound/fsl-imx-audmux.h> + +/ { + chosen { + stdout-path = &uart1; + }; + + aliases { + mdio-gpio0 = &mdio1; + }; + + mdio1: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mdio1>; + gpios = <&gpio6 5 GPIO_ACTIVE_HIGH + &gpio6 4 GPIO_ACTIVE_HIGH>; + }; + + reg_28p0v: regulator-28p0v { + compatible = "regulator-fixed"; + regulator-name = "28V_IN"; + regulator-min-microvolt = <28000000>; + regulator-max-microvolt = <28000000>; + regulator-always-on; + }; + + reg_12p0v: regulator-12p0v { + compatible = "regulator-fixed"; + vin-supply = <®_28p0v>; + regulator-name = "12V_MAIN"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + reg_5p0v_main: regulator-5p0v-main { + compatible = "regulator-fixed"; + vin-supply = <®_12p0v>; + regulator-name = "5V_MAIN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_5p0v_user_usb: regulator-5p0v-user-usb { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_user_usb>; + vin-supply = <®_5p0v_main>; + regulator-name = "5V_USER_USB"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_LOW>; + startup-delay-us = <1000>; + }; + + reg_3p3v_pmic: regulator-3p3v-pmic { + compatible = "regulator-fixed"; + vin-supply = <®_12p0v>; + regulator-name = "PMIC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + vin-supply = <®_3p3v_pmic>; + regulator-name = "GEN_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_3p3v_sd: regulator-3p3v-sd { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_3p3v_sd>; + vin-supply = <®_3p3v>; + regulator-name = "3V3_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>; + startup-delay-us = <1000>; + enable-active-high; + regulator-always-on; + }; + + reg_3p3v_display: regulator-3p3v-display { + compatible = "regulator-fixed"; + vin-supply = <®_12p0v>; + regulator-name = "3V3_DISPLAY"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_3p3v_ssd: regulator-3p3v-ssd { + compatible = "regulator-fixed"; + vin-supply = <®_12p0v>; + regulator-name = "3V3_SSD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + sound1 { + compatible = "simple-audio-card"; + simple-audio-card,name = "Front"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound1_codec>; + simple-audio-card,frame-master = <&sound1_codec>; + simple-audio-card,widgets = + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HPLEFT", + "Headphone Jack", "HPRIGHT", + "LEFTIN", "HPL", + "RIGHTIN", "HPR"; + simple-audio-card,aux-devs = <&hpa1>; + + sound1_cpu: simple-audio-card,cpu { + sound-dai = <&ssi2>; + }; + + sound1_codec: simple-audio-card,codec { + sound-dai = <&codec1>; + clocks = <&cs2000>; + }; + }; + + sound2 { + compatible = "simple-audio-card"; + simple-audio-card,name = "Back"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound2_codec>; + simple-audio-card,frame-master = <&sound2_codec>; + simple-audio-card,widgets = + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HPLEFT", + "Headphone Jack", "HPRIGHT", + "LEFTIN", "HPL", + "RIGHTIN", "HPR"; + simple-audio-card,aux-devs = <&hpa2>; + + sound2_cpu: simple-audio-card,cpu { + sound-dai = <&ssi1>; + }; + + sound2_codec: simple-audio-card,codec { + sound-dai = <&codec2>; + clocks = <&cs2000>; + }; + }; + + panel { + power-supply = <®_3p3v_display>; + status = "disabled"; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + disp0: disp0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx-parallel-display"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0>; + status = "disabled"; + + port@0 { + reg = <0>; + + disp0_in_0: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + disp0_out: endpoint { + remote-endpoint = <&tc358767_in>; + }; + }; + }; + + cs2000_ref: cs2000-ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + cs2000_in_dummy: cs2000-in-dummy { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + edp_refclk: edp-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; +}; + +®_arm { + vin-supply = <&sw1a_reg>; +}; + +®_pu { + vin-supply = <&sw1c_reg>; +}; + +®_soc { + vin-supply = <&sw1c_reg>; +}; + +&ldb { + lvds-channel@0 { + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + linux,rs485-enabled-at-boot-time; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + status = "okay"; + + flash@0 { + compatible = "st,m25p128", "jedec,spi-nor"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <100000>; + status = "okay"; + + codec2: codec@18 { + compatible = "ti,tlv320dac3100"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_codec2>; + reg = <0x18>; + #sound-dai-cells = <0>; + HPVDD-supply = <®_3p3v>; + SPRVDD-supply = <®_3p3v>; + SPLVDD-supply = <®_3p3v>; + AVDD-supply = <®_3p3v>; + IOVDD-supply = <®_3p3v>; + DVDD-supply = <&vgen4_reg>; + gpio-reset = <&gpio1 2 GPIO_ACTIVE_HIGH>; + }; + + accel@1c { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_accel>; + compatible = "fsl,mma8451"; + reg = <0x1c>; + interrupt-parent = <&gpio1>; + interrupt-names = "int1", "int2"; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>, <20 IRQ_TYPE_LEVEL_LOW>; + }; + + hpa2: amp@60 { + compatible = "ti,tpa6130a2"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpa2>; + reg = <0x60>; + power-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + Vdd-supply = <®_5p0v_main>; + }; + + edp-bridge@68 { + compatible = "toshiba,tc358767"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tc358767>; + reg = <0x68>; + shutdown-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + clock-names = "ref"; + clocks = <&edp_refclk>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + tc358767_in: endpoint { + remote-endpoint = <&disp0_out>; + }; + }; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; + + pmic@08 { + compatible = "fsl,pfuze100"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pfuze100_irq>; + reg = <0x08>; + interrupt-parent = <&gpio7>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + }; + }; + + temp-sense@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + cs2000: clkgen@4e { + compatible = "cirrus,cs2000-cp"; + reg = <0x4e>; + #clock-cells = <0>; + clock-names = "clk_in", "ref_clk"; + clocks = <&cs2000_in_dummy>, <&cs2000_ref>; + assigned-clocks = <&cs2000>; + assigned-clock-rates = <24000000>; + }; + + eeprom@54 { + compatible = "at,24c128"; + reg = <0x54>; + }; + + rtc@68 { + compatible = "dallas,ds1341"; + reg = <0x68>; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <400000>; + status = "okay"; + + codec1: codec@18 { + compatible = "ti,tlv320dac3100"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_codec1>; + reg = <0x18>; + #sound-dai-cells = <0>; + HPVDD-supply = <®_3p3v>; + SPRVDD-supply = <®_3p3v>; + SPLVDD-supply = <®_3p3v>; + AVDD-supply = <®_3p3v>; + IOVDD-supply = <®_3p3v>; + DVDD-supply = <&vgen4_reg>; + gpio-reset = <&gpio1 0 GPIO_ACTIVE_HIGH>; + }; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ts>; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <®_5p0v_main>; + vio-supply = <®_3p3v>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + touchscreen-inverted-y; + touchscreen-swapped-x-y; + syna,sensor-type = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + touchscreen-inverted-y; + touchscreen-swapped-x-y; + syna,sensor-type = <1>; + }; + }; + + hpa1: amp@60 { + compatible = "ti,tpa6130a2"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpa1>; + reg = <0x60>; + power-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; + Vdd-supply = <®_5p0v_main>; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&disp0_in_0>; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_3p3v_sd>; + vqmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <4>; + cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_3p3v_sd>; + vqmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + non-removable; + status = "okay"; +}; + +&sata { + target-supply = <®_3p3v_ssd>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; + phy-reset-duration = <100>; + phy-supply = <®_3p3v>; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; +}; + +&usbh1 { + vbus-supply = <®_5p0v_main>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_5p0v_user_usb>; + disable-over-current; + dr_mode = "host"; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&ssi2 { + status = "okay"; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; + + ssi1 { + fsl,audmux-port = <0>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_SYN | + IMX_AUDMUX_V2_PTCR_TFSEL(2) | + IMX_AUDMUX_V2_PTCR_TCSEL(2) | + IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TCLKDIR) + IMX_AUDMUX_V2_PDCR_RXDSEL(2) + >; + }; + + aud3 { + fsl,audmux-port = <2>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(0) + >; + }; + + ssi2 { + fsl,audmux-port = <1>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_SYN | + IMX_AUDMUX_V2_PTCR_TFSEL(4) | + IMX_AUDMUX_V2_PTCR_TCSEL(4) | + IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TCLKDIR) + IMX_AUDMUX_V2_PDCR_RXDSEL(4) + >; + }; + + aud5 { + fsl,audmux-port = <4>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(1) + >; + }; +}; + +&iomuxc { + pinctrl_accel: accelgrp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x4001b000 + MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x4001b000 + >; + }; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 + MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x130b0 + MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x130b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_codec1: dac1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x40000038 + >; + }; + + pinctrl_codec2: dac2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x40000038 + >; + }; + + pinctrl_disp0: disp0grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100f9 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x100f9 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x100f9 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x100f9 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x100f9 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x100f9 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x100f9 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x100f9 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x100f9 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x100f9 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100f9 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x100f9 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x100f9 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x100f9 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x100f9 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x100f9 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x100f9 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x100f9 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x100f9 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x100f9 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x100f9 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x100f9 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x100f9 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x100f9 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x100f9 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x100f9 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x100f9 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x100f9 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x000b1 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b1 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x100f5 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x100f5 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x100c0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x100c0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x100f5 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x100f5 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x40010040 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_mdio1: bitbangmdiogrp { + fsl,pins = < + /* Bitbang MDIO for DEB Switch */ + MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x4001b030 + MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x40018830 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x10038 + >; + }; + + pinctrl_pfuze100_irq: pfuze100grp { + fsl,pins = < + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x40010000 + >; + }; + + pinctrl_reg_3p3v_sd: mmcsupply1grp { + fsl,pins = < + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x858 + >; + }; + + pinctrl_reg_user_usb: usbotggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x40000038 + >; + }; + + pinctrl_rmii_phy_irq: phygrp { + fsl,pins = < + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x40010000 + >; + }; + + pinctrl_tc358767: tc358767grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x10 + >; + }; + + pinctrl_tpa1: tpa6130-1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x40000038 + >; + }; + + pinctrl_tpa2: tpa6130-2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x40000038 + >; + }; + + pinctrl_ts: tsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x10059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10069 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x40010040 + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x40010040 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x10059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10069 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x40010040 + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x40010040 + + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x1b0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 6d7bf6496117..e426faa9c243 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -197,7 +197,7 @@ arm,shared-override; }; - pcie: pcie@0x01000000 { + pcie: pcie@1ffc000 { compatible = "fsl,imx6q-pcie", "snps,dw-pcie"; reg = <0x01ffc000 0x04000>, <0x01f00000 0x80000>; @@ -205,6 +205,7 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; + bus-range = <0x00 0xff>; ranges = <0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */ num-lanes = <1>; diff --git a/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts b/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts new file mode 100644 index 000000000000..011726c836cd --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts @@ -0,0 +1,55 @@ +/* + * Copyright 2017 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6qp.dtsi" +#include "imx6qdl-nitrogen6_som2.dtsi" + +/ { + model = "Boundary Devices i.MX6 Quad Plus Nitrogen6_SOM2 Board"; + compatible = "boundary,imx6qp-nitrogen6_som2", "fsl,imx6qp"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts index b23458062f5e..a8a5004dd9c8 100644 --- a/arch/arm/boot/dts/imx6qp-sabresd.dts +++ b/arch/arm/boot/dts/imx6qp-sabresd.dts @@ -50,8 +50,8 @@ compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp"; }; -&cpu0 { - arm-supply = <&sw2_reg>; +®_arm { + vin-supply = <&sw2_reg>; }; &iomuxc { diff --git a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts new file mode 100644 index 000000000000..882b3bd97e07 --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2016-2017 Zodiac Inflight Innovations + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include <imx6qp.dtsi> +#include <imx6qdl-zii-rdu2.dtsi> + +/ { + model = "ZII RDU2+ Board"; + compatible = "zii,imx6qp-zii-rdu2", "fsl,imx6qp"; +}; diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi index 24d071f5d9cd..59453f2ac4ba 100644 --- a/arch/arm/boot/dts/imx6qp.dtsi +++ b/arch/arm/boot/dts/imx6qp.dtsi @@ -56,40 +56,59 @@ clocks = <&clks IMX6QDL_CLK_OCRAM>; }; - ipu1: ipu@02400000 { - compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu"; - clocks = <&clks IMX6QDL_CLK_IPU1>, - <&clks IMX6QDL_CLK_IPU1_DI0>, <&clks IMX6QDL_CLK_IPU1_DI1>, - <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>, - <&clks IMX6QDL_CLK_LDB_DI0_PODF>, <&clks IMX6QDL_CLK_LDB_DI1_PODF>, - <&clks IMX6QDL_CLK_PRG0_APB>; - clock-names = "bus", - "di0", "di1", - "di0_sel", "di1_sel", - "ldb_di0", "ldb_di1", "prg"; - }; + aips-bus@02100000 { + pre1: pre@21c8000 { + compatible = "fsl,imx6qp-pre"; + reg = <0x021c8000 0x1000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; + clocks = <&clks IMX6QDL_CLK_PRE0>; + clock-names = "axi"; + fsl,iram = <&ocram2>; + }; - ipu2: ipu@02800000 { - compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu"; - clocks = <&clks IMX6QDL_CLK_IPU2>, - <&clks IMX6QDL_CLK_IPU2_DI0>, <&clks IMX6QDL_CLK_IPU2_DI1>, - <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>, - <&clks IMX6QDL_CLK_LDB_DI0_PODF>, <&clks IMX6QDL_CLK_LDB_DI1_PODF>, - <&clks IMX6QDL_CLK_PRG1_APB>; - clock-names = "bus", - "di0", "di1", - "di0_sel", "di1_sel", - "ldb_di0", "ldb_di1", "prg"; - }; + pre2: pre@21c9000 { + compatible = "fsl,imx6qp-pre"; + reg = <0x021c9000 0x1000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_EDGE_RISING>; + clocks = <&clks IMX6QDL_CLK_PRE1>; + clock-names = "axi"; + fsl,iram = <&ocram2>; + }; - pcie: pcie@0x01000000 { - compatible = "fsl,imx6qp-pcie", "snps,dw-pcie"; - }; + pre3: pre@21ca000 { + compatible = "fsl,imx6qp-pre"; + reg = <0x021ca000 0x1000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_EDGE_RISING>; + clocks = <&clks IMX6QDL_CLK_PRE2>; + clock-names = "axi"; + fsl,iram = <&ocram3>; + }; - aips-bus@02100000 { - mmdc0: mmdc@021b0000 { /* MMDC0 */ - compatible = "fsl,imx6qp-mmdc", "fsl,imx6q-mmdc"; - reg = <0x021b0000 0x4000>; + pre4: pre@21cb000 { + compatible = "fsl,imx6qp-pre"; + reg = <0x021cb000 0x1000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_EDGE_RISING>; + clocks = <&clks IMX6QDL_CLK_PRE3>; + clock-names = "axi"; + fsl,iram = <&ocram3>; + }; + + prg1: prg@21cc000 { + compatible = "fsl,imx6qp-prg"; + reg = <0x021cc000 0x1000>; + clocks = <&clks IMX6QDL_CLK_PRG0_APB>, + <&clks IMX6QDL_CLK_PRG0_AXI>; + clock-names = "ipg", "axi"; + fsl,pres = <&pre1>, <&pre2>, <&pre3>; + }; + + prg2: prg@21cd000 { + compatible = "fsl,imx6qp-prg"; + reg = <0x021cd000 0x1000>; + clocks = <&clks IMX6QDL_CLK_PRG1_APB>, + <&clks IMX6QDL_CLK_PRG1_AXI>; + clock-names = "ipg", "axi"; + fsl,pres = <&pre4>, <&pre2>, <&pre3>; }; }; }; @@ -101,6 +120,16 @@ <0 119 IRQ_TYPE_LEVEL_HIGH>; }; +&ipu1 { + compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu"; + fsl,prg = <&prg1>; +}; + +&ipu2 { + compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu"; + fsl,prg = <&prg2>; +}; + &ldb { clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>, <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>, @@ -110,3 +139,11 @@ "di0_sel", "di1_sel", "di2_sel", "di3_sel", "di0", "di1"; }; + +&mmdc0 { + compatible = "fsl,imx6qp-mmdc", "fsl,imx6q-mmdc"; +}; + +&pcie { + compatible = "fsl,imx6qp-pcie", "snps,dw-pcie"; +}; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index dd4ec85ecbaa..3f1416be4c36 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -297,7 +297,8 @@ }; uart1: serial@02020000 { - compatible = "fsl,imx6sx-uart", "fsl,imx21-uart"; + compatible = "fsl,imx6sx-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02020000 0x4000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_UART_IPG>, @@ -1053,7 +1054,8 @@ }; uart2: serial@021e8000 { - compatible = "fsl,imx6sx-uart", "fsl,imx21-uart"; + compatible = "fsl,imx6sx-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021e8000 0x4000>; interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_UART_IPG>, @@ -1065,7 +1067,8 @@ }; uart3: serial@021ec000 { - compatible = "fsl,imx6sx-uart", "fsl,imx21-uart"; + compatible = "fsl,imx6sx-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021ec000 0x4000>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_UART_IPG>, @@ -1077,7 +1080,8 @@ }; uart4: serial@021f0000 { - compatible = "fsl,imx6sx-uart", "fsl,imx21-uart"; + compatible = "fsl,imx6sx-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f0000 0x4000>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_UART_IPG>, @@ -1089,7 +1093,8 @@ }; uart5: serial@021f4000 { - compatible = "fsl,imx6sx-uart", "fsl,imx21-uart"; + compatible = "fsl,imx6sx-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f4000 0x4000>; interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_UART_IPG>, @@ -1229,7 +1234,8 @@ }; uart6: serial@022a0000 { - compatible = "fsl,imx6sx-uart", "fsl,imx21-uart"; + compatible = "fsl,imx6sx-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x022a0000 0x4000>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_UART_IPG>, @@ -1281,7 +1287,7 @@ }; }; - pcie: pcie@0x08000000 { + pcie: pcie@8ffc000 { compatible = "fsl,imx6sx-pcie", "snps,dw-pcie"; reg = <0x08ffc000 0x4000>; /* DBI */ #address-cells = <3>; @@ -1293,6 +1299,7 @@ 0x81000000 0 0 0x08f80000 0 0x00010000 /* non-prefetchable memory */ 0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; + bus-range = <0x00 0xff>; num-lanes = <1>; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_PCIE_REF_125M>, diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts index 00f98e5bfcaf..f18e1f1d0ce2 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts @@ -85,11 +85,6 @@ assigned-clock-rates = <786432000>; }; -&cpu0 { - arm-supply = <®_arm>; - soc-supply = <®_soc>; -}; - &i2c2 { clock_frequency = <100000>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6ul-geam.dtsi b/arch/arm/boot/dts/imx6ul-geam.dtsi index 940aef67313b..eb94d956808b 100644 --- a/arch/arm/boot/dts/imx6ul-geam.dtsi +++ b/arch/arm/boot/dts/imx6ul-geam.dtsi @@ -49,6 +49,23 @@ reg = <0x80000000 0x08000000>; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm8 0 100000>; + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <100>; + }; + chosen { stdout-path = &uart1; }; @@ -143,12 +160,24 @@ display = <&display0>; }; +&pwm8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm8>; + status = "okay"; +}; + &tsc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_tsc>; xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; }; +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; @@ -290,6 +319,12 @@ >; }; + pinctrl_pwm8: pwm8grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x110b0 + >; + }; + pinctrl_tsc: tscgrp { fsl,pin = < MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 @@ -299,6 +334,16 @@ >; }; + pinctrl_sai2: sai2grp { + fsl,pins = < + MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x130b0 + MX6UL_PAD_JTAG_TMS__CCM_CLKO1 0x4001b031 + MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 + MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 + MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x120b0 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6ul-isiot-common.dtsi b/arch/arm/boot/dts/imx6ul-isiot-common.dtsi new file mode 100644 index 000000000000..2beaab6e272e --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-isiot-common.dtsi @@ -0,0 +1,141 @@ +/* + * Copyright (C) 2016 Amarula Solutions B.V. + * Copyright (C) 2016 Engicam S.r.l. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +&i2c1 { + stmpe811: gpio-expander@44 { + compatible = "st,stmpe811"; + reg = <0x44>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_stmpe>; + interrupt-parent = <&gpio1>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + + stmpe: touchscreen { + compatible = "st,stmpe-ts"; + st,sample-time = <4>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,adc-freq = <1>; + st,ave-ctrl = <1>; + st,touch-det-delay = <2>; + st,settling = <2>; + st,fraction-z = <7>; + st,i-drive = <1>; + }; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat + &pinctrl_lcdif_ctrl>; + display = <&display0>; + status = "okay"; + + display0: display { + bits-per-pixel = <16>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <28000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <30>; + hback-porch = <30>; + hsync-len = <64>; + vback-porch = <5>; + vfront-porch = <5>; + vsync-len = <20>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&iomuxc { + pinctrl_lcdif_ctrl: lcdifctrlgrp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 + >; + }; + + pinctrl_lcdif_dat: lcdifdatgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79 + >; + }; + + pinctrl_stmpe: stmpegrp { + fsl,pins = < + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts b/arch/arm/boot/dts/imx6ul-isiot-emmc.dts index f5b422898e61..73a1d0f0b9d5 100644 --- a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts +++ b/arch/arm/boot/dts/imx6ul-isiot-emmc.dts @@ -43,6 +43,7 @@ /dts-v1/; #include "imx6ul-isiot.dtsi" +#include "imx6ul-isiot-common.dtsi" / { model = "Engicam Is.IoT MX6UL eMMC Starter kit"; diff --git a/arch/arm/boot/dts/imx6ul-isiot-nand.dts b/arch/arm/boot/dts/imx6ul-isiot-nand.dts index de15e1c75dd1..da29a86eb6a8 100644 --- a/arch/arm/boot/dts/imx6ul-isiot-nand.dts +++ b/arch/arm/boot/dts/imx6ul-isiot-nand.dts @@ -43,6 +43,7 @@ /dts-v1/; #include "imx6ul-isiot.dtsi" +#include "imx6ul-isiot-common.dtsi" / { model = "Engicam Is.IoT MX6UL NAND Starter kit"; diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi index 0b43699af3e3..ea30380ad7a4 100644 --- a/arch/arm/boot/dts/imx6ul-isiot.dtsi +++ b/arch/arm/boot/dts/imx6ul-isiot.dtsi @@ -52,6 +52,49 @@ chosen { stdout-path = &uart1; }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm8 0 100000>; + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <100>; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&pwm8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm8>; + status = "okay"; +}; + +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + status = "okay"; }; &uart1 { @@ -72,6 +115,36 @@ }; &iomuxc { + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x4001b8b0 + MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x4001b8b0 + >; + }; + + pinctrl_pwm8: pwm8grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x110b0 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x130b0 + MX6UL_PAD_JTAG_TMS__CCM_CLKO1 0x4001b031 + MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 + MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 + MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x120b0 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi index 373ee19196a6..18bebd6d8d47 100644 --- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi @@ -44,11 +44,39 @@ chosen { stdout-path = "serial0:115200n8"; }; + + panel: panel { + compatible = "edt,et057090dhu"; + backlight = <&bl>; + power-supply = <®_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&lcdif_out>; + }; + }; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; }; &bl { brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; + power-supply = <®_3v3>; + status = "okay"; }; @@ -75,32 +103,11 @@ }; &lcdif { - display = <&display0>; status = "okay"; - display0: lcd-display { - bits-per-pixel = <16>; - bus-width = <18>; - - display-timings { - native-mode = <&timing_vga>; - - /* Standard VGA timing */ - timing_vga: 640x480 { - clock-frequency = <25175000>; - hactive = <640>; - vactive = <480>; - hback-porch = <40>; - hfront-porch = <24>; - vback-porch = <32>; - vfront-porch = <11>; - hsync-len = <96>; - vsync-len = <2>; - de-active = <1>; - hsync-active = <0>; - vsync-active = <0>; - pixelclk-active = <0>; - }; + port { + lcdif_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index a171545478be..2d87489f9105 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -60,13 +60,6 @@ regulator-max-microvolt = <3300000>; }; - reg_vref_1v8: regulator-vref-1v8 { - compatible = "regulator-fixed"; - regulator-name = "vref-1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - sound { compatible = "simple-audio-card"; simple-audio-card,name = "imx7-sgtl5000"; @@ -85,11 +78,11 @@ }; &adc1 { - vref-supply = <®_vref_1v8>; + vref-supply = <®_DCDC3>; }; &adc2 { - vref-supply = <®_vref_1v8>; + vref-supply = <®_DCDC3>; }; &cpu0 { @@ -151,29 +144,29 @@ regulators { reg_DCDC1: DCDC1 { /* V1.0_SOC */ - regulator-min-microvolt = <975000>; - regulator-max-microvolt = <1125000>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; regulator-boot-on; regulator-always-on; }; reg_DCDC2: DCDC2 { /* V1.1_ARM */ - regulator-min-microvolt = <975000>; - regulator-max-microvolt = <1125000>; + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1100000>; regulator-boot-on; regulator-always-on; }; reg_DCDC3: DCDC3 { /* V1.8 */ - regulator-min-microvolt = <1775000>; - regulator-max-microvolt = <1825000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; reg_DCDC4: DCDC4 { /* V1.35_DRAM */ - regulator-min-microvolt = <1325000>; - regulator-max-microvolt = <1375000>; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; regulator-boot-on; regulator-always-on; }; @@ -181,33 +174,33 @@ reg_LDO1: LDO1 { /* PWR_EN_+V3.3_ETH */ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; - regulator-always-on; + regulator-boot-on; }; reg_LDO2: LDO2 { /* +V1.8_SD */ - regulator-min-microvolt = <1775000>; - regulator-max-microvolt = <3325000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; reg_LDO3: LDO3 { /* PWR_EN_+V3.3_LPSR */ - regulator-min-microvolt = <3275000>; - regulator-max-microvolt = <3325000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; reg_LDO4: LDO4 { /* V1.8_LPSR */ - regulator-min-microvolt = <1775000>; - regulator-max-microvolt = <1825000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; reg_LDO5: LDO5 { /* PWR_EN_+V3.3 */ - regulator-min-microvolt = <1775000>; - regulator-max-microvolt = <1825000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; diff --git a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts index bd01d2cc642d..a608a14d8c85 100644 --- a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts @@ -57,6 +57,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; }; }; diff --git a/arch/arm/boot/dts/imx7d-sdb-sht11.dts b/arch/arm/boot/dts/imx7d-sdb-sht11.dts new file mode 100644 index 000000000000..64a20ed1713a --- /dev/null +++ b/arch/arm/boot/dts/imx7d-sdb-sht11.dts @@ -0,0 +1,74 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "imx7d-sdb.dts" + +/ { + sensor { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sensor>; + compatible = "sensirion,sht15"; + clk-gpios = <&gpio4 12 0>; + data-gpios = <&gpio4 13 0>; + vcc-supply = <®_sht15>; + }; + + reg_sht15: regulator-sht15 { + compatible = "regulator-fixed"; + regulator-name = "reg_sht15"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&i2c3 { + status = "disabled"; +}; + +&iomuxc { + pinctrl_sensor: sensorgrp { + fsl,pins = < + MX7D_PAD_I2C3_SDA__GPIO4_IO13 0x4000007f + MX7D_PAD_I2C3_SCL__GPIO4_IO12 0x4000007f + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 5d3a43b8de20..c4f12fd2e044 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -493,10 +493,9 @@ }; ocotp: ocotp-ctrl@30350000 { - compatible = "syscon"; + compatible = "fsl,imx7d-ocotp", "syscon"; reg = <0x30350000 0x10000>; - clocks = <&clks IMX7D_CLK_DUMMY>; - status = "disabled"; + clocks = <&clks IMX7D_OCOTP_CLK>; }; anatop: anatop@30360000 { @@ -559,7 +558,7 @@ }; src: src@30390000 { - compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon"; + compatible = "fsl,imx7d-src", "syscon"; reg = <0x30390000 0x10000>; interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; #reset-cells = <1>; diff --git a/arch/arm/boot/dts/include/arm b/arch/arm/boot/dts/include/arm new file mode 120000 index 000000000000..a96aa0ea9d8c --- /dev/null +++ b/arch/arm/boot/dts/include/arm @@ -0,0 +1 @@ +..
\ No newline at end of file diff --git a/arch/arm/boot/dts/include/arm64 b/arch/arm/boot/dts/include/arm64 new file mode 120000 index 000000000000..074a835fca3e --- /dev/null +++ b/arch/arm/boot/dts/include/arm64 @@ -0,0 +1 @@ +../../../../arm64/boot/dts
\ No newline at end of file diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi new file mode 100644 index 000000000000..f5aeb3959afd --- /dev/null +++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi @@ -0,0 +1,243 @@ +/* + * Common CPCAP configuration used on Motorola phones + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&mcspi1 { + cpcap: pmic@0 { + compatible = "motorola,cpcap", "st,6556002"; + reg = <0>; /* cs0 */ + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <3000000>; + spi-cs-high; + + cpcap_adc: adc { + compatible = "motorola,mapphone-cpcap-adc"; + interrupts-extended = <&cpcap 8 0>; + interrupt-names = "adcdone"; + #io-channel-cells = <1>; + }; + + cpcap_charger: charger { + compatible = "motorola,mapphone-cpcap-charger"; + interrupts-extended = < + &cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0 + &cpcap 22 0 &cpcap 20 0 &cpcap 19 0 &cpcap 54 0 + >; + interrupt-names = + "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn", + "rvrs_mode", "chrgcurr1", "vbusvld", "battdetb"; + mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW + &gpio3 23 GPIO_ACTIVE_LOW>; + io-channels = <&cpcap_adc 0 &cpcap_adc 1 + &cpcap_adc 2 &cpcap_adc 5 + &cpcap_adc 6>; + io-channel-names = "battdetb", "battp", + "vbus", "chg_isense", + "batti"; + }; + + cpcap_regulator: regulator { + compatible = "motorola,mapphone-cpcap-regulator"; + + cpcap_regulators: regulators { + }; + }; + + cpcap_rtc: rtc { + compatible = "motorola,cpcap-rtc"; + + interrupt-parent = <&cpcap>; + interrupts = <39 IRQ_TYPE_NONE>, <26 IRQ_TYPE_NONE>; + }; + + power_button: button { + compatible = "motorola,cpcap-pwrbutton"; + + interrupts = <23 IRQ_TYPE_NONE>; + }; + + cpcap_usb2_phy: phy { + compatible = "motorola,mapphone-cpcap-usb-phy"; + pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>; + pinctrl-1 = <&usb_ulpi_pins>; + pinctrl-2 = <&usb_utmi_pins>; + pinctrl-3 = <&uart3_pins>; + pinctrl-names = "default", "ulpi", "utmi", "uart"; + #phy-cells = <0>; + interrupts-extended = < + &cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0 + &cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0 + &cpcap 48 1 + >; + interrupt-names = + "id_ground", "id_float", "se0conn", "vbusvld", + "sessvld", "sessend", "se1", "dm", "dp"; + mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH + &gpio1 0 GPIO_ACTIVE_HIGH>; + io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>; + io-channel-names = "vbus", "id"; + vusb-supply = <&vusb>; + }; + + led_red: led-red { + compatible = "motorola,cpcap-led-red"; + vdd-supply = <&sw5>; + label = "status-led:red"; + }; + + led_green: led-green { + compatible = "motorola,cpcap-led-green"; + vdd-supply = <&sw5>; + label = "status-led:green"; + }; + + led_blue: led-blue { + compatible = "motorola,cpcap-led-blue"; + vdd-supply = <&sw5>; + label = "status-led:blue"; + }; + + led_adl: led-adl { + compatible = "motorola,cpcap-led-adl"; + vdd-supply = <&sw5>; + label = "button-backlight"; + }; + + led_cp: led-cp { + compatible = "motorola,cpcap-led-cp"; + vdd-supply = <&sw5>; + label = "shift-key-light"; + }; + }; +}; + +&cpcap_regulators { + sw5: SW5 { + regulator-min-microvolt = <5050000>; + regulator-max-microvolt = <5050000>; + regulator-enable-ramp-delay = <50000>; + regulator-boot-on; + }; + + vcam: VCAM { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-enable-ramp-delay = <1000>; + }; + + /* Used by DSS */ + vcsi: VCSI { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <1000>; + regulator-boot-on; + }; + + vdac: VDAC { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <1000>; + }; + + vdig: VDIG { + regulator-min-microvolt = <1875000>; + regulator-max-microvolt = <1875000>; + regulator-enable-ramp-delay = <1000>; + }; + + vfuse: VFUSE { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3150000>; + regulator-enable-ramp-delay = <1000>; + }; + + vhvio: VHVIO { + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + regulator-enable-ramp-delay = <1000>; + regulator-always-on; + }; + + /* Used by eMMC at mmc2 */ + vsdio: VSDIO { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-enable-ramp-delay = <1000>; + }; + + vpll: VPLL { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <100>; + }; + + vrf1: VRF1 { + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + regulator-enable-ramp-delay = <1000>; + }; + + vrf2: VRF2 { + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + regulator-enable-ramp-delay = <1000>; + }; + + vrfref: VRFREF { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2775000>; + regulator-enable-ramp-delay = <100>; + }; + + vwlan1: VWLAN1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1900000>; + regulator-enable-ramp-delay = <1000>; + }; + + /* Used by micro-SDIO at mmc1 */ + vwlan2: VWLAN2 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <1000>; + }; + + vsim: VSIM { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-enable-ramp-delay = <1000>; + }; + + vsimcard: VSIMCARD { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-enable-ramp-delay = <1000>; + }; + + vvib: VVIB { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <500>; + }; + + vusb: VUSB { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <1000>; + }; + + vaudio: VAUDIO { + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + regulator-enable-ramp-delay = <1000>; + }; +}; diff --git a/arch/arm/boot/dts/moxart-uc7112lx.dts b/arch/arm/boot/dts/moxart-uc7112lx.dts index 10d088df0c35..4a962a26482d 100644 --- a/arch/arm/boot/dts/moxart-uc7112lx.dts +++ b/arch/arm/boot/dts/moxart-uc7112lx.dts @@ -6,7 +6,7 @@ */ /dts-v1/; -/include/ "moxart.dtsi" +#include "moxart.dtsi" / { model = "MOXA UC-7112-LX"; diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi index 1fd27ed65a01..e86f8c905ac5 100644 --- a/arch/arm/boot/dts/moxart.dtsi +++ b/arch/arm/boot/dts/moxart.dtsi @@ -6,6 +6,7 @@ */ /include/ "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { compatible = "moxa,moxart"; @@ -36,8 +37,8 @@ ranges; intc: interrupt-controller@98800000 { - compatible = "moxa,moxart-ic"; - reg = <0x98800000 0x38>; + compatible = "moxa,moxart-ic", "faraday,ftintc010"; + reg = <0x98800000 0x100>; interrupt-controller; #interrupt-cells = <2>; interrupt-mask = <0x00080000>; @@ -59,15 +60,15 @@ timer: timer@98400000 { compatible = "moxa,moxart-timer"; reg = <0x98400000 0x42>; - interrupts = <19 1>; + interrupts = <19 IRQ_TYPE_EDGE_FALLING>; clocks = <&clk_apb>; }; gpio: gpio@98700000 { gpio-controller; #gpio-cells = <2>; - compatible = "moxa,moxart-gpio"; - reg = <0x98700000 0xC>; + compatible = "moxa,moxart-gpio", "faraday,ftgpio010"; + reg = <0x98700000 0x100>; }; rtc: rtc { @@ -80,7 +81,7 @@ dma: dma@90500000 { compatible = "moxa,moxart-dma"; reg = <0x90500080 0x40>; - interrupts = <24 0>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; }; @@ -93,7 +94,7 @@ sdhci: sdhci@98e00000 { compatible = "moxa,moxart-sdhci"; reg = <0x98e00000 0x5C>; - interrupts = <5 0>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_apb>; dmas = <&dma 5>, <&dma 5>; @@ -120,7 +121,7 @@ mac0: mac@90900000 { compatible = "moxa,moxart-mac"; reg = <0x90900000 0x90>; - interrupts = <25 0>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH>; phy-handle = <ðphy0>; phy-mode = "mii"; status = "disabled"; @@ -129,7 +130,7 @@ mac1: mac@92000000 { compatible = "moxa,moxart-mac"; reg = <0x92000000 0x90>; - interrupts = <27 0>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; phy-handle = <ðphy1>; phy-mode = "mii"; status = "disabled"; @@ -138,7 +139,7 @@ uart0: uart@98200000 { compatible = "ns16550a"; reg = <0x98200000 0x20>; - interrupts = <31 8>; + interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clock-frequency = <14745600>; diff --git a/arch/arm/boot/dts/omap3-cpu-thermal.dtsi b/arch/arm/boot/dts/omap3-cpu-thermal.dtsi new file mode 100644 index 000000000000..235ecfd61e2d --- /dev/null +++ b/arch/arm/boot/dts/omap3-cpu-thermal.dtsi @@ -0,0 +1,20 @@ +/* + * Device Tree Source for OMAP3 SoC CPU thermal + * + * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/thermal/thermal.h> + +cpu_thermal: cpu_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + coefficients = <0 20000>; + + /* sensor ID */ + thermal-sensors = <&bandgap 0>; +}; diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index e268efde6c6d..4ad7d5565906 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -37,6 +37,13 @@ }; &omap3_pmx_core { + gpmc_pins: pinmux_gpmc_pins { + pinctrl-single,pins = < + /* OneNAND seems to require PIN_INPUT on clock. */ + OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */ + >; + }; + uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ @@ -98,6 +105,9 @@ }; &gpmc { + pinctrl-names = "default"; + pinctrl-0 = <&gpmc_pins>; + nand@0,0 { compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ @@ -126,6 +136,48 @@ #address-cells = <1>; #size-cells = <1>; + + status = "okay"; + }; + + onenand@0,0 { + compatible = "ti,omap2-onenand"; + reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */ + + gpmc,sync-read; + gpmc,sync-write; + gpmc,burst-length = <16>; + gpmc,burst-read; + gpmc,burst-wrap; + gpmc,burst-write; + gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */ + gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */ + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <87>; + gpmc,cs-wr-off-ns = <87>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <10>; + gpmc,adv-wr-off-ns = <10>; + gpmc,oe-on-ns = <15>; + gpmc,oe-off-ns = <87>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <87>; + gpmc,rd-cycle-ns = <112>; + gpmc,wr-cycle-ns = <112>; + gpmc,access-ns = <81>; + gpmc,page-burst-access-ns = <15>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,clk-activation-ns = <5>; + gpmc,wr-data-mux-bus-ns = <30>; + gpmc,wr-access-ns = <81>; + gpmc,sync-clk-ps = <15000>; + + #address-cells = <1>; + #size-cells = <1>; + + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index b64cfda8dbb7..49f37084e435 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -155,6 +155,13 @@ compatible = "nokia,n900-ir"; pwms = <&pwm9 0 26316 0>; /* 38000 Hz */ }; + + /* controlled (enabled/disabled) directly by bcm2048 and wl1251 */ + vctcxo: vctcxo { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + }; }; &omap3_pmx_core { @@ -162,8 +169,10 @@ uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */ + OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */ + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts */ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */ + OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */ >; }; @@ -920,6 +929,8 @@ interrupt-parent = <&gpio2>; interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */ + + clocks = <&vctcxo>; }; }; @@ -937,9 +948,17 @@ }; &uart2 { - interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; + + bcm2048: bluetooth { + compatible = "brcm,bcm2048-nokia", "nokia,h4p-bluetooth"; + reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; /* 91 */ + host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* 101 */ + bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* 37 */ + clocks = <&vctcxo>; + clock-names = "sysclk"; + }; }; &uart3 { diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 5d8c4b4a4205..df3366fa5409 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -58,6 +58,13 @@ pinctrl-0 = <&debug_leds>; }; }; + + /* controlled (enabled/disabled) directly by wl1271 */ + vctcxo: vctcxo { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + }; }; &omap3_pmx_core { @@ -125,6 +132,15 @@ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE4) /* gpio_93 (cmt_apeslpx) */ >; }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */ + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts */ + OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */ + OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */ + >; + }; }; &omap3_pmx_core2 { @@ -435,3 +451,19 @@ &ssi_port2 { status = "disabled"; }; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + + bluetooth { + compatible = "ti,wl1271-bluetooth-nokia", "nokia,h4p-bluetooth"; + + reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; /* 26 */ + host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* 101 */ + bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* 37 */ + + clocks = <&vctcxo>; + clock-names = "sysclk"; + }; +}; diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index 834fdf13601f..ac4f8795b756 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -14,7 +14,7 @@ / { cpus { - cpu@0 { + cpu: cpu@0 { /* OMAP343x/OMAP35xx variants OPP1-5 */ operating-points = < /* kHz uV */ @@ -56,12 +56,16 @@ }; }; - bandgap@48002524 { + bandgap: bandgap@48002524 { reg = <0x48002524 0x4>; compatible = "ti,omap34xx-bandgap"; #thermal-sensor-cells = <0>; }; }; + + thermal_zones: thermal-zones { + #include "omap3-cpu-thermal.dtsi" + }; }; &ssi { diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index d1a3e56b50ce..ade31d74c70c 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -19,7 +19,7 @@ cpus { /* OMAP3630/OMAP37xx 'standard device' variants OPP50 to OPP130 */ - cpu@0 { + cpu: cpu@0 { operating-points = < /* kHz uV */ 300000 1012500 @@ -88,12 +88,16 @@ }; }; - bandgap@48002524 { + bandgap: bandgap@48002524 { reg = <0x48002524 0x4>; compatible = "ti,omap36xx-bandgap"; #thermal-sensor-cells = <0>; }; }; + + thermal_zones: thermal-zones { + #include "omap3-cpu-thermal.dtsi" + }; }; /* OMAP3630 needs dss_96m_fck for VENC */ diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index f3ccb4ceed9e..89eb607f4a9e 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -5,7 +5,9 @@ */ /dts-v1/; +#include <dt-bindings/input/input.h> #include "omap443x.dtsi" +#include "motorola-cpcap-mapphone.dtsi" / { model = "Motorola Droid 4 XT894"; @@ -15,35 +17,76 @@ stdout-path = &uart3; }; + aliases { + display0 = &lcd0; + display1 = &hdmi0; + }; + /* * We seem to have only 1021 MB accessible, 1021 - 1022 is locked, - * then 1023 - 1024 seems to contain mbm. For SRAM, see the notes - * below about SRAM and L3_ICLK2 being unused by default, + * then 1023 - 1024 seems to contain mbm. */ memory { device_type = "memory"; reg = <0x80000000 0x3fd00000>; /* 1021 MB */ }; - /* CPCAP really supports 1650000 to 3400000 range */ - vmmc: regulator-mmc { + /* Poweroff GPIO probably connected to CPCAP */ + gpio-poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&poweroff_gpio>; + pinctrl-names = "default"; + gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; /* gpio50 */ + }; + + hdmi0: connector { + compatible = "hdmi-connector"; + pinctrl-0 = <&hdmi_hpd_gpio>; + pinctrl-names = "default"; + label = "hdmi"; + type = "d"; + + hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio63 */ + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + }; + + /* + * HDMI 5V regulator probably sourced from battery. Let's keep + * keep this as always enabled for HDMI to work until we've + * figured what the encoder chip is. + */ + hdmi_regulator: regulator-hdmi { compatible = "regulator-fixed"; - regulator-name = "vmmc"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; + regulator-name = "hdmi"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio59 */ + enable-active-high; regulator-always-on; }; - /* CPCAP really supports 3000000 to 3100000 range */ - vemmc: regulator-emmc { + /* HS USB Host PHY on PORT 1 */ + hsusb1_phy: hsusb1_phy { + compatible = "usb-nop-xceiv"; + }; + + /* LCD regulator from sw5 source */ + lcd_regulator: regulator-lcd { compatible = "regulator-fixed"; - regulator-name = "vemmc"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; + regulator-name = "lcd"; + regulator-min-microvolt = <5050000>; + regulator-max-microvolt = <5050000>; + gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */ + enable-active-high; + vin-supply = <&sw5>; }; - /* CPCAP really supports 1650000 to 1950000 range */ + /* This is probably coming straight from the battery.. */ wl12xx_vmmc: regulator-wl12xx { compatible = "regulator-fixed"; regulator-name = "vwl1271"; @@ -53,21 +96,195 @@ startup-delay-us = <70000>; enable-active-high; }; + + gpio_keys { + compatible = "gpio-keys"; + + volume_down { + label = "Volume Down"; + gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */ + linux,code = <KEY_VOLUMEDOWN>; + linux,can-disable; + }; + + slider { + label = "Keypad Slide"; + gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */ + linux,input-type = <EV_SW>; + linux,code = <SW_KEYPAD_SLIDE>; + linux,can-disable; + + }; + }; +}; + +&dss { + status = "okay"; +}; + +&gpio6 { + touchscreen_reset { + gpio-hog; + gpios = <13 0>; + output-high; + line-name = "touchscreen-reset"; + }; +}; + +&dsi1 { + status = "okay"; + vdd-supply = <&vcsi>; + + port { + dsi1_out_ep: endpoint { + remote-endpoint = <&lcd0_in>; + lanes = <0 1 2 3 4 5>; + }; + }; + + lcd0: display { + compatible = "panel-dsi-cm"; + label = "lcd0"; + vddi-supply = <&lcd_regulator>; + reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ + + panel-timing { + clock-frequency = <0>; /* Calculated by dsi */ + + hback-porch = <2>; + hactive = <540>; + hfront-porch = <0>; + hsync-len = <2>; + + vback-porch = <1>; + vactive = <960>; + vfront-porch = <0>; + vsync-len = <1>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd0_in: endpoint { + remote-endpoint = <&dsi1_out_ep>; + }; + }; + }; }; -/* L3_2 interconnect is unused, SRAM, GPMC and L3_ICLK2 disabled */ -&gpmc { - status = "disabled"; +&hdmi { + status = "okay"; + pinctrl-0 = <&dss_hdmi_pins>; + pinctrl-names = "default"; + vdda-supply = <&vdac>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + lanes = <1 0 3 2 5 4 7 6>; + }; + }; +}; + +&i2c1 { + tmp105@48 { + compatible = "ti,tmp105"; + reg = <0x48>; + pinctrl-0 = <&tmp105_irq>; + pinctrl-names = "default"; + /* kpd_row0.gpio_178 */ + interrupts-extended = <&gpio6 18 IRQ_TYPE_EDGE_FALLING + &omap4_pmx_core 0x14e>; + interrupt-names = "irq", "wakeup"; + wakeup-source; + }; +}; + +&keypad { + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = < + + /* Row 1 */ + MATRIX_KEY(0, 2, KEY_1) + MATRIX_KEY(0, 6, KEY_2) + MATRIX_KEY(2, 3, KEY_3) + MATRIX_KEY(0, 7, KEY_4) + MATRIX_KEY(0, 4, KEY_5) + MATRIX_KEY(5, 5, KEY_6) + MATRIX_KEY(0, 1, KEY_7) + MATRIX_KEY(0, 5, KEY_8) + MATRIX_KEY(0, 0, KEY_9) + MATRIX_KEY(1, 6, KEY_0) + + /* Row 2 */ + MATRIX_KEY(3, 4, KEY_APOSTROPHE) + MATRIX_KEY(7, 6, KEY_Q) + MATRIX_KEY(7, 7, KEY_W) + MATRIX_KEY(7, 2, KEY_E) + MATRIX_KEY(1, 0, KEY_R) + MATRIX_KEY(4, 4, KEY_T) + MATRIX_KEY(1, 2, KEY_Y) + MATRIX_KEY(6, 7, KEY_U) + MATRIX_KEY(2, 2, KEY_I) + MATRIX_KEY(5, 6, KEY_O) + MATRIX_KEY(3, 7, KEY_P) + MATRIX_KEY(6, 5, KEY_BACKSPACE) + + /* Row 3 */ + MATRIX_KEY(5, 4, KEY_TAB) + MATRIX_KEY(5, 7, KEY_A) + MATRIX_KEY(2, 7, KEY_S) + MATRIX_KEY(7, 0, KEY_D) + MATRIX_KEY(2, 6, KEY_F) + MATRIX_KEY(6, 2, KEY_G) + MATRIX_KEY(6, 6, KEY_H) + MATRIX_KEY(1, 4, KEY_J) + MATRIX_KEY(3, 1, KEY_K) + MATRIX_KEY(2, 1, KEY_L) + MATRIX_KEY(4, 6, KEY_ENTER) + + /* Row 4 */ + MATRIX_KEY(3, 6, KEY_LEFTSHIFT) /* KEY_CAPSLOCK */ + MATRIX_KEY(6, 1, KEY_Z) + MATRIX_KEY(7, 4, KEY_X) + MATRIX_KEY(5, 1, KEY_C) + MATRIX_KEY(1, 7, KEY_V) + MATRIX_KEY(2, 4, KEY_B) + MATRIX_KEY(4, 1, KEY_N) + MATRIX_KEY(1, 1, KEY_M) + MATRIX_KEY(3, 5, KEY_COMMA) + MATRIX_KEY(5, 2, KEY_DOT) + MATRIX_KEY(6, 3, KEY_UP) + MATRIX_KEY(7, 3, KEY_OK) + + /* Row 5 */ + MATRIX_KEY(2, 5, KEY_LEFTCTRL) /* KEY_LEFTSHIFT */ + MATRIX_KEY(4, 5, KEY_LEFTALT) /* SYM */ + MATRIX_KEY(6, 0, KEY_MINUS) + MATRIX_KEY(4, 7, KEY_EQUAL) + MATRIX_KEY(1, 5, KEY_SPACE) + MATRIX_KEY(3, 2, KEY_SLASH) + MATRIX_KEY(4, 3, KEY_LEFT) + MATRIX_KEY(5, 3, KEY_DOWN) + MATRIX_KEY(3, 3, KEY_RIGHT) + + /* Side buttons, KEY_VOLUMEDOWN and KEY_PWER are on CPCAP? */ + MATRIX_KEY(5, 0, KEY_VOLUMEUP) + >; }; &mmc1 { - vmmc-supply = <&vmmc>; + vmmc-supply = <&vwlan2>; bus-width = <4>; - cd-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */ + cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* gpio176 */ }; &mmc2 { - vmmc-supply = <&vemmc>; + vmmc-supply = <&vsdio>; bus-width = <8>; non-removable; }; @@ -93,12 +310,78 @@ }; }; -/* L3_2 interconnect is unused, SRAM, GPMC and L3_ICLK2 disabled */ -&ocmcram { - status = "disabled"; +&i2c1 { + lm3532@38 { + compatible = "ti,lm3532"; + reg = <0x38>; + + enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + + backlight { + compatible = "ti,lm3532-backlight"; + + lcd { + led-sources = <0 1 2>; + ramp-up-msec = <1>; + ramp-down-msec = <0>; + }; + }; + }; +}; + +/* + * REVISIT: Add gpio173 reset pin handling to the driver, see gpio-hog above. + * If the GPIO reset is used, we probably need to have /lib/firmware/maxtouch.fw + * available. See "mxt-app" and "droid4-touchscreen-firmware" tools for more + * information. + */ +&i2c2 { + tsp@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + + /* gpio_183 with sys_nirq2 pad as wakeup */ + interrupts-extended = <&gpio6 23 IRQ_TYPE_EDGE_FALLING + &omap4_pmx_core 0x160>; + interrupt-names = "irq", "wakeup"; + wakeup-source; + }; }; &omap4_pmx_core { + + /* hdmi_hpd.gpio_63 */ + hdmi_hpd_gpio: pinmux_hdmi_hpd_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3) + >; + }; + + /* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */ + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) + OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) + >; + }; + + /* gpmc_ncs0.gpio_50 */ + poweroff_gpio: pinmux_poweroff_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3) + >; + }; + + /* kpd_row0.gpio_178 */ + tmp105_irq: pinmux_tmp105_irq { + pinctrl-single,pins = < + OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; + usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins { /* gpio_60 */ pinctrl-single,pins = < @@ -106,6 +389,12 @@ >; }; + touchscreen_pins: pinmux_touchscreen_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; + usb_ulpi_pins: pinmux_usb_ulpi_pins { pinctrl-single,pins = < OMAP4_IOPAD(0x196, MUX_MODE7) @@ -180,9 +469,49 @@ &omap4_pmx_core 0x17c>; }; +&usbhsehci { + phys = <&hsusb1_phy>; +}; + +&usbhshost { + port1-mode = "ohci-phy-4pin-dpdm"; + port2-mode = "ehci-tll"; +}; + /* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */ &usb_otg_hs { interface-type = <1>; mode = <3>; power = <50>; }; + +&i2c4 { + ak8975: magnetometer@c { + compatible = "asahi-kasei,ak8975"; + reg = <0x0c>; + + vdd-supply = <&vhvio>; + + interrupt-parent = <&gpio6>; + interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */ + + rotation-matrix = "-1", "0", "0", + "0", "1", "0", + "0", "0", "-1"; + + }; + + lis3dh: accelerometer@18 { + compatible = "st,lis3dh-accel"; + reg = <0x18>; + + vdd-supply = <&vhvio>; + + interrupt-parent = <&gpio2>; + interrupts = <2 IRQ_TYPE_EDGE_BOTH>; /* gpio34 */ + + rotation-matrix = "0", "-1", "0", + "1", "0", "0", + "0", "0", "1"; + }; +}; diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi index fc6a8610c24c..03c8ad91ddac 100644 --- a/arch/arm/boot/dts/omap443x.dtsi +++ b/arch/arm/boot/dts/omap443x.dtsi @@ -71,4 +71,8 @@ }; +&cpu_thermal { + coefficients = <0 20000>; +}; + /include/ "omap443x-clocks.dtsi" diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi index ef66e12e0a67..c43f2a2d0a1e 100644 --- a/arch/arm/boot/dts/omap4460.dtsi +++ b/arch/arm/boot/dts/omap4460.dtsi @@ -90,4 +90,8 @@ }; +&cpu_thermal { + coefficients = <348 (-9301)>; +}; + /include/ "omap446x-clocks.dtsi" diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 222155ca8ad7..eaff2a5751dd 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -1127,6 +1127,15 @@ &cpu_thermal { polling-delay = <500>; /* milliseconds */ + coefficients = <65 (-1791)>; }; /include/ "omap54xx-clocks.dtsi" + +&gpu_thermal { + coefficients = <117 (-2992)>; +}; + +&core_thermal { + coefficients = <0 2000>; +}; diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts index 39d9e6ddefed..2da1413f5720 100644 --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -95,17 +95,17 @@ function = "sdc1"; }; clk { - pins = "gpio167"; /* SDC5 CLK */ + pins = "gpio167"; /* SDC1 CLK */ drive-strength = <16>; bias-disable; }; cmd { - pins = "gpio168"; /* SDC5 CMD */ + pins = "gpio168"; /* SDC1 CMD */ drive-strength = <10>; bias-pull-up; }; data { - /* SDC5 D0 to D7 */ + /* SDC1 D0 to D7 */ pins = "gpio159", "gpio160", "gpio161", "gpio162", "gpio163", "gpio164", "gpio165", "gpio166"; drive-strength = <10>; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 91c9a62ae725..747669a62aa8 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -392,6 +392,21 @@ cap-mmc-highspeed; }; + sdcc2: sdcc@12140000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12140000 0x8000>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <48000000>; + cap-sd-highspeed; + cap-mmc-highspeed; + }; + sdcc3: sdcc@12180000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; @@ -408,6 +423,21 @@ no-1-8-v; }; + sdcc4: sdcc@121c0000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x121c0000 0x8000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + max-frequency = <48000000>; + cap-sd-highspeed; + cap-mmc-highspeed; + }; + sdcc5: sdcc@12200000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts index 96c853bab8ba..e7c1577d56f4 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts @@ -413,14 +413,6 @@ dma-controller@f9944000 { qcom,controlled-remotely; }; - - usb-phy@f9a55000 { - status = "ok"; - }; - - usb@f9a55000 { - status = "ok"; - }; }; &spmi_bus { diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index d3e1a61b8671..307bf6a647b3 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -2,8 +2,8 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> +#include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/reset/qcom,gcc-msm8974.h> #include "skeleton.dtsi" / { @@ -67,7 +67,7 @@ #size-cells = <0>; interrupts = <1 9 0xf04>; - cpu@0 { + CPU0: cpu@0 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; @@ -78,7 +78,7 @@ cpu-idle-states = <&CPU_SPC>; }; - cpu@1 { + CPU1: cpu@1 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; @@ -89,7 +89,7 @@ cpu-idle-states = <&CPU_SPC>; }; - cpu@2 { + CPU2: cpu@2 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; @@ -100,7 +100,7 @@ cpu-idle-states = <&CPU_SPC>; }; - cpu@3 { + CPU3: cpu@3 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; @@ -250,6 +250,9 @@ cx-supply = <&pm8841_s2>; + clocks = <&xo_board>; + clock-names = "xo"; + memory-region = <&adsp_region>; qcom,smem-states = <&adsp_smp2p_out 0>; @@ -695,42 +698,276 @@ qcom,ee = <0>; }; - usb1_phy: usb-phy@f9a55000 { - compatible = "qcom,usb-otg-snps"; + etr@fc322000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0xfc322000 0x1000>; - reg = <0xf9a55000 0x400>; - interrupts-extended = <&intc 0 134 0>, <&intc 0 140 0>, - <&spmi_bus 0 0x9 0 0>; - interrupt-names = "core_irq", "async_irq", "pmic_id_irq"; + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; - vddcx-supply = <&pm8841_s2>; - v3p3-supply = <&pm8941_l24>; - v1p8-supply = <&pm8941_l6>; + port { + etr_in: endpoint { + slave-mode; + remote-endpoint = <&replicator_out0>; + }; + }; + }; - dr_mode = "otg"; - qcom,phy-init-sequence = <0x63 0x81 0xfffffff>; - qcom,otg-control = <1>; - qcom,phy-num = <0>; + tpiu@fc318000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0xfc318000 0x1000>; - resets = <&gcc GCC_USB2A_PHY_BCR>, <&gcc GCC_USB_HS_BCR>; - reset-names = "phy", "link"; + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; - clocks = <&gcc GCC_XO_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>, - <&gcc GCC_USB_HS_AHB_CLK>; - clock-names = "phy", "core", "iface"; + port { + tpiu_in: endpoint { + slave-mode; + remote-endpoint = <&replicator_out1>; + }; + }; + }; - status = "disabled"; + replicator@fc31c000 { + compatible = "qcom,coresight-replicator1x", "arm,primecell"; + reg = <0xfc31c000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + replicator_out0: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + port@1 { + reg = <1>; + replicator_out1: endpoint { + remote-endpoint = <&tpiu_in>; + }; + }; + port@2 { + reg = <0>; + replicator_in: endpoint { + slave-mode; + remote-endpoint = <&etf_out>; + }; + }; + }; }; - usb@f9a55000 { - compatible = "qcom,ci-hdrc"; - reg = <0xf9a55000 0x400>; - dr_mode = "otg"; - interrupts = <0 134 0>, <0 140 0>; - interrupt-names = "core_irq", "async_irq"; - usb-phy = <&usb1_phy>; + etf@fc307000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0xfc307000 0x1000>; - status = "disabled"; + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + etf_out: endpoint { + remote-endpoint = <&replicator_in>; + }; + }; + port@1 { + reg = <0>; + etf_in: endpoint { + slave-mode; + remote-endpoint = <&merger_out>; + }; + }; + }; + }; + + funnel@fc31b000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0xfc31b000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* + * Not described input ports: + * 0 - connected trought funnel to Audio, Modem and + * Resource and Power Manager CPU's + * 2...7 - not-connected + */ + port@1 { + reg = <1>; + merger_in1: endpoint { + slave-mode; + remote-endpoint = <&funnel1_out>; + }; + }; + port@8 { + reg = <0>; + merger_out: endpoint { + remote-endpoint = <&etf_in>; + }; + }; + }; + }; + + funnel@fc31a000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0xfc31a000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* + * Not described input ports: + * 0 - not-connected + * 1 - connected trought funnel to Multimedia CPU + * 2 - connected to Wireless CPU + * 3 - not-connected + * 4 - not-connected + * 6 - not-connected + * 7 - connected to STM + */ + port@5 { + reg = <5>; + funnel1_in5: endpoint { + slave-mode; + remote-endpoint = <&kpss_out>; + }; + }; + port@8 { + reg = <0>; + funnel1_out: endpoint { + remote-endpoint = <&merger_in1>; + }; + }; + }; + }; + + funnel@fc345000 { /* KPSS funnel only 4 inputs are used */ + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0xfc345000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + kpss_in0: endpoint { + slave-mode; + remote-endpoint = <&etm0_out>; + }; + }; + port@1 { + reg = <1>; + kpss_in1: endpoint { + slave-mode; + remote-endpoint = <&etm1_out>; + }; + }; + port@2 { + reg = <2>; + kpss_in2: endpoint { + slave-mode; + remote-endpoint = <&etm2_out>; + }; + }; + port@3 { + reg = <3>; + kpss_in3: endpoint { + slave-mode; + remote-endpoint = <&etm3_out>; + }; + }; + port@8 { + reg = <0>; + kpss_out: endpoint { + remote-endpoint = <&funnel1_in5>; + }; + }; + }; + }; + + etm@fc33c000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0xfc33c000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU0>; + + port { + etm0_out: endpoint { + remote-endpoint = <&kpss_in0>; + }; + }; + }; + + etm@fc33d000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0xfc33d000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU1>; + + port { + etm1_out: endpoint { + remote-endpoint = <&kpss_in1>; + }; + }; + }; + + etm@fc33e000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0xfc33e000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU2>; + + port { + etm2_out: endpoint { + remote-endpoint = <&kpss_in2>; + }; + }; + }; + + etm@fc33f000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0xfc33f000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU3>; + + port { + etm3_out: endpoint { + remote-endpoint = <&kpss_in3>; + }; + }; }; }; @@ -760,6 +997,11 @@ compatible = "qcom,rpm-msm8974"; qcom,smd-channels = "rpm_requests"; + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc"; + #clock-cells = <1>; + }; + pm8841-regulators { compatible = "qcom,rpm-pm8841-regulators"; diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts index 118a8e2b86bd..52a7b586bac7 100644 --- a/arch/arm/boot/dts/r7s72100-genmai.dts +++ b/arch/arm/boot/dts/r7s72100-genmai.dts @@ -44,6 +44,10 @@ clock-frequency = <48000000>; }; +&rtc_x1_clk { + clock-frequency = <32768>; +}; + &mtu2 { status = "okay"; }; @@ -59,6 +63,10 @@ }; }; +&rtc { + status = "okay"; +}; + &scif2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts index 02b59c5b3c53..72df20a04320 100644 --- a/arch/arm/boot/dts/r7s72100-rskrza1.dts +++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts @@ -43,6 +43,10 @@ clock-frequency = <48000000>; }; +&rtc_x1_clk { + clock-frequency = <32768>; +}; + &mtu2 { status = "okay"; }; @@ -69,6 +73,10 @@ status = "okay"; }; +&rtc { + status = "okay"; +}; + &scif2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index 1cf2bd038090..0423996e4dcc 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -51,6 +51,20 @@ clock-frequency = <0>; }; + rtc_x1_clk: rtc_x1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + /* If clk present, value must be set by board to 32678 */ + clock-frequency = <0>; + }; + + rtc_x3_clk: rtc_x3 { + #clock-cells = <0>; + compatible = "fixed-clock"; + /* If clk present, value must be set by board to 4000000 */ + clock-frequency = <0>; + }; + /* Fixed factor clocks */ b_clk: b { #clock-cells = <0>; @@ -117,11 +131,20 @@ clock-output-names = "ostm0", "ostm1"; }; + mstp6_clks: mstp6_clks@fcfe042c { + #clock-cells = <1>; + compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xfcfe042c 4>; + clocks = <&p0_clk>; + clock-indices = <R7S72100_CLK_RTC>; + clock-output-names = "rtc"; + }; + mstp7_clks: mstp7_clks@fcfe0430 { #clock-cells = <1>; compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0xfcfe0430 4>; - clocks = <&p0_clk>; + clocks = <&b_clk>; clock-indices = <R7S72100_CLK_ETHER>; clock-output-names = "ether"; }; @@ -162,9 +185,12 @@ #clock-cells = <1>; compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0xfcfe0444 4>; - clocks = <&p1_clk>, <&p1_clk>; - clock-indices = <R7S72100_CLK_SDHI1 R7S72100_CLK_SDHI0>; - clock-output-names = "sdhi1", "sdhi0"; + clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>; + clock-indices = < + R7S72100_CLK_SDHI00 R7S72100_CLK_SDHI01 + R7S72100_CLK_SDHI10 R7S72100_CLK_SDHI11 + >; + clock-output-names = "sdhi00", "sdhi01", "sdhi10", "sdhi11"; }; }; @@ -379,6 +405,13 @@ cache-level = <2>; }; + wdt: watchdog@fcfe0000 { + compatible = "renesas,r7s72100-wdt", "renesas,rza-wdt"; + reg = <0xfcfe0000 0x6>; + interrupts = <GIC_SPI 106 IRQ_TYPE_EDGE_RISING>; + clocks = <&p0_clk>; + }; + i2c0: i2c@fcfee000 { #address-cells = <1>; #size-cells = <0>; @@ -499,7 +532,10 @@ GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp12_clks R7S72100_CLK_SDHI0>; + clocks = <&mstp12_clks R7S72100_CLK_SDHI00>, + <&mstp12_clks R7S72100_CLK_SDHI01>; + clock-names = "core", "cd"; + power-domains = <&cpg_clocks>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; @@ -512,7 +548,10 @@ GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp12_clks R7S72100_CLK_SDHI1>; + clocks = <&mstp12_clks R7S72100_CLK_SDHI10>, + <&mstp12_clks R7S72100_CLK_SDHI11>; + clock-names = "core", "cd"; + power-domains = <&cpg_clocks>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; @@ -535,4 +574,18 @@ power-domains = <&cpg_clocks>; status = "disabled"; }; + + rtc: rtc@fcff1000 { + compatible = "renesas,r7s72100-rtc", "renesas,sh-rtc"; + reg = <0xfcff1000 0x2e>; + interrupts = <GIC_SPI 276 IRQ_TYPE_EDGE_RISING + GIC_SPI 277 IRQ_TYPE_EDGE_RISING + GIC_SPI 278 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "alarm", "period", "carry"; + clocks = <&mstp6_clks R7S72100_CLK_RTC>, <&rtc_x1_clk>, + <&rtc_x3_clk>, <&extal_clk>; + clock-names = "fck", "rtc_x1", "rtc_x3", "extal"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 00eb9a7114dc..1f5c9f6dddba 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -32,18 +32,16 @@ next-level-cache = <&L2_CA15>; }; - L2_CA15: cache-controller@0 { + L2_CA15: cache-controller-0 { compatible = "cache"; - reg = <0>; clocks = <&cpg_clocks R8A73A4_CLK_Z>; power-domains = <&pd_a3sm>; cache-unified; cache-level = <2>; }; - L2_CA7: cache-controller@100 { + L2_CA7: cache-controller-1 { compatible = "cache"; - reg = <0x100>; clocks = <&cpg_clocks R8A73A4_CLK_Z2>; power-domains = <&pd_a3km>; cache-unified; @@ -469,6 +467,9 @@ <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&mstp4_clks R8A73A4_CLK_INTC_SYS>; + clock-names = "clk"; + power-domains = <&pd_c4>; }; bsc: bus@fec10000 { @@ -727,16 +728,18 @@ mstp4_clks: mstp4_clks@e6150140 { compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; - clocks = <&main_div2_clk>, <&main_div2_clk>, + clocks = <&main_div2_clk>, <&cpg_clocks R8A73A4_CLK_ZS>, + <&main_div2_clk>, <&cpg_clocks R8A73A4_CLK_HP>, <&cpg_clocks R8A73A4_CLK_HP>; #clock-cells = <1>; clock-indices = < - R8A73A4_CLK_IRQC R8A73A4_CLK_IIC5 - R8A73A4_CLK_IIC4 R8A73A4_CLK_IIC3 + R8A73A4_CLK_IRQC R8A73A4_CLK_INTC_SYS + R8A73A4_CLK_IIC5 R8A73A4_CLK_IIC4 + R8A73A4_CLK_IIC3 >; clock-output-names = - "irqc", "iic5", "iic4", "iic3"; + "irqc", "intc-sys", "iic5", "iic4", "iic3"; }; mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks"; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index d8393b97768b..0ddac81742e4 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -32,9 +32,8 @@ next-level-cache = <&L2_CA15>; }; - L2_CA15: cache-controller@0 { + L2_CA15: cache-controller-0 { compatible = "cache"; - reg = <0>; cache-unified; cache-level = <2>; power-domains = <&sysc R8A7743_PD_CA15_SCU>; @@ -63,6 +62,7 @@ clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 408>; }; irqc: interrupt-controller@e61c0000 { @@ -82,6 +82,7 @@ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 407>; }; timer { @@ -103,6 +104,7 @@ clock-names = "extal", "usb_extal"; #clock-cells = <2>; #power-domain-cells = <0>; + #reset-cells = <1>; }; prr: chipid@ff000044 { @@ -149,6 +151,7 @@ clocks = <&cpg CPG_MOD 219>; clock-names = "fck"; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <15>; }; @@ -181,6 +184,7 @@ clocks = <&cpg CPG_MOD 218>; clock-names = "fck"; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <15>; }; @@ -196,6 +200,7 @@ <&dmac1 0x21>, <&dmac1 0x22>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 204>; status = "disabled"; }; @@ -210,6 +215,7 @@ <&dmac1 0x25>, <&dmac1 0x26>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 203>; status = "disabled"; }; @@ -224,6 +230,7 @@ <&dmac1 0x27>, <&dmac1 0x28>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 202>; status = "disabled"; }; @@ -238,6 +245,7 @@ <&dmac1 0x1b>, <&dmac1 0x1c>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 1106>; status = "disabled"; }; @@ -252,6 +260,7 @@ <&dmac1 0x1f>, <&dmac1 0x20>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 1107>; status = "disabled"; }; @@ -266,6 +275,7 @@ <&dmac1 0x23>, <&dmac1 0x24>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 1108>; status = "disabled"; }; @@ -277,9 +287,10 @@ clocks = <&cpg CPG_MOD 206>; clock-names = "fck"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, - <&dmac1 0x3d>, <&dmac1 0x3e>; + <&dmac1 0x3d>, <&dmac1 0x3e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 206>; status = "disabled"; }; @@ -294,6 +305,7 @@ <&dmac1 0x19>, <&dmac1 0x1a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 207>; status = "disabled"; }; @@ -308,6 +320,7 @@ <&dmac1 0x1d>, <&dmac1 0x1e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 216>; status = "disabled"; }; @@ -323,6 +336,7 @@ <&dmac1 0x29>, <&dmac1 0x2a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 721>; status = "disabled"; }; @@ -338,6 +352,7 @@ <&dmac1 0x2d>, <&dmac1 0x2e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 720>; status = "disabled"; }; @@ -353,6 +368,7 @@ <&dmac1 0x2b>, <&dmac1 0x2c>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 719>; status = "disabled"; }; @@ -368,6 +384,7 @@ <&dmac1 0x2f>, <&dmac1 0x30>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 718>; status = "disabled"; }; @@ -383,6 +400,7 @@ <&dmac1 0xfb>, <&dmac1 0xfc>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 715>; status = "disabled"; }; @@ -398,6 +416,7 @@ <&dmac1 0xfd>, <&dmac1 0xfe>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 714>; status = "disabled"; }; @@ -413,6 +432,7 @@ <&dmac1 0x39>, <&dmac1 0x3a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 717>; status = "disabled"; }; @@ -428,6 +448,7 @@ <&dmac1 0x4d>, <&dmac1 0x4e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 716>; status = "disabled"; }; @@ -443,6 +464,7 @@ <&dmac1 0x3b>, <&dmac1 0x3c>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 713>; status = "disabled"; }; @@ -452,6 +474,7 @@ interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 813>; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 813>; phy-mode = "rmii"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi index 1f65ff68a469..2feb0084bb3b 100644 --- a/arch/arm/boot/dts/r8a7745.dtsi +++ b/arch/arm/boot/dts/r8a7745.dtsi @@ -32,9 +32,8 @@ next-level-cache = <&L2_CA7>; }; - L2_CA7: cache-controller@0 { + L2_CA7: cache-controller-0 { compatible = "cache"; - reg = <0>; cache-unified; cache-level = <2>; power-domains = <&sysc R8A7745_PD_CA7_SCU>; @@ -63,6 +62,7 @@ clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 408>; }; irqc: interrupt-controller@e61c0000 { @@ -82,6 +82,7 @@ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 407>; }; timer { @@ -103,6 +104,7 @@ clock-names = "extal", "usb_extal"; #clock-cells = <2>; #power-domain-cells = <0>; + #reset-cells = <1>; }; prr: chipid@ff000044 { @@ -149,6 +151,7 @@ clocks = <&cpg CPG_MOD 219>; clock-names = "fck"; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <15>; }; @@ -181,6 +184,7 @@ clocks = <&cpg CPG_MOD 218>; clock-names = "fck"; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <15>; }; @@ -196,6 +200,7 @@ <&dmac1 0x21>, <&dmac1 0x22>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 204>; status = "disabled"; }; @@ -210,6 +215,7 @@ <&dmac1 0x25>, <&dmac1 0x26>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 203>; status = "disabled"; }; @@ -224,6 +230,7 @@ <&dmac1 0x27>, <&dmac1 0x28>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 202>; status = "disabled"; }; @@ -238,6 +245,7 @@ <&dmac1 0x1b>, <&dmac1 0x1c>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 1106>; status = "disabled"; }; @@ -252,6 +260,7 @@ <&dmac1 0x1f>, <&dmac1 0x20>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 1107>; status = "disabled"; }; @@ -266,6 +275,7 @@ <&dmac1 0x23>, <&dmac1 0x24>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 1108>; status = "disabled"; }; @@ -277,9 +287,10 @@ clocks = <&cpg CPG_MOD 206>; clock-names = "fck"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, - <&dmac1 0x3d>, <&dmac1 0x3e>; + <&dmac1 0x3d>, <&dmac1 0x3e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 206>; status = "disabled"; }; @@ -294,6 +305,7 @@ <&dmac1 0x19>, <&dmac1 0x1a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 207>; status = "disabled"; }; @@ -308,6 +320,7 @@ <&dmac1 0x1d>, <&dmac1 0x1e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 216>; status = "disabled"; }; @@ -323,6 +336,7 @@ <&dmac1 0x29>, <&dmac1 0x2a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 721>; status = "disabled"; }; @@ -338,6 +352,7 @@ <&dmac1 0x2d>, <&dmac1 0x2e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 720>; status = "disabled"; }; @@ -353,6 +368,7 @@ <&dmac1 0x2b>, <&dmac1 0x2c>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 719>; status = "disabled"; }; @@ -368,6 +384,7 @@ <&dmac1 0x2f>, <&dmac1 0x30>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 718>; status = "disabled"; }; @@ -383,6 +400,7 @@ <&dmac1 0xfb>, <&dmac1 0xfc>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 715>; status = "disabled"; }; @@ -398,6 +416,7 @@ <&dmac1 0xfd>, <&dmac1 0xfe>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 714>; status = "disabled"; }; @@ -413,6 +432,7 @@ <&dmac1 0x39>, <&dmac1 0x3a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 717>; status = "disabled"; }; @@ -428,6 +448,7 @@ <&dmac1 0x4d>, <&dmac1 0x4e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 716>; status = "disabled"; }; @@ -443,6 +464,7 @@ <&dmac1 0x3b>, <&dmac1 0x3c>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 713>; status = "disabled"; }; @@ -452,6 +474,7 @@ interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 813>; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 813>; phy-mode = "rmii"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts index 211d239d9041..c79d55eb43c5 100644 --- a/arch/arm/boot/dts/r8a7778-bockw.dts +++ b/arch/arm/boot/dts/r8a7778-bockw.dts @@ -229,5 +229,4 @@ &scif_clk { clock-frequency = <14745600>; - status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index 89c5b24a3d03..9412a86f9b30 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -236,7 +236,6 @@ &scif_clk { clock-frequency = <14745600>; - status = "okay"; }; &sdhi0 { diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index bd512c86e852..ba100a6f67ca 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -581,7 +581,6 @@ &scif_clk { clock-frequency = <14745600>; - status = "okay"; }; &msiof1 { diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 6d10450de6d7..99269aaca6fc 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -129,17 +129,15 @@ next-level-cache = <&L2_CA7>; }; - L2_CA15: cache-controller@0 { + L2_CA15: cache-controller-0 { compatible = "cache"; - reg = <0>; power-domains = <&sysc R8A7790_PD_CA15_SCU>; cache-unified; cache-level = <2>; }; - L2_CA7: cache-controller@100 { + L2_CA7: cache-controller-1 { compatible = "cache"; - reg = <0x100>; power-domains = <&sysc R8A7790_PD_CA7_SCU>; cache-unified; cache-level = <2>; @@ -187,6 +185,9 @@ <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&mstp4_clks R8A7790_CLK_INTC_SYS>; + clock-names = "clk"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; }; gpio0: gpio@e6050000 { @@ -1100,7 +1101,7 @@ }; /* External CAN clock */ - can_clk: can_clk { + can_clk: can { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by the board. */ @@ -1366,10 +1367,10 @@ mstp4_clks: mstp4_clks@e6150140 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; - clocks = <&cp_clk>; + clocks = <&cp_clk>, <&zs_clk>; #clock-cells = <1>; - clock-indices = <R8A7790_CLK_IRQC>; - clock-output-names = "irqc"; + clock-indices = <R8A7790_CLK_IRQC R8A7790_CLK_INTC_SYS>; + clock-output-names = "irqc", "intc-sys"; }; mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -1442,8 +1443,11 @@ compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>; clocks = <&p_clk>, - <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, - <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, + <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>, + <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>, + <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>, + <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>, + <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&p_clk>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, @@ -1740,11 +1744,11 @@ rcar_sound,dvc { dvc0: dvc-0 { - dmas = <&audma0 0xbc>; + dmas = <&audma1 0xbc>; dma-names = "tx"; }; dvc1: dvc-1 { - dmas = <&audma0 0xbe>; + dmas = <&audma1 0xbe>; dma-names = "tx"; }; }; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 5405d337d744..001e6116c47c 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -292,7 +292,7 @@ x2_clk: x2-clock { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <148500000>; + clock-frequency = <74250000>; }; x13_clk: x13-clock { @@ -516,7 +516,6 @@ &scif_clk { clock-frequency = <14745600>; - status = "okay"; }; &sdhi0 { @@ -767,7 +766,6 @@ &pcie_bus_clk { clock-frequency = <100000000>; - status = "okay"; }; &pciec { diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index 6761d11d3f9e..95da5cb9d37a 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -226,7 +226,7 @@ phy-handle = <&phy1>; renesas,ether-link-active-low; - status = "ok"; + status = "okay"; phy1: ethernet-phy@1 { reg = <1>; @@ -359,7 +359,7 @@ /* composite video input */ &vin0 { - status = "ok"; + status = "okay"; pinctrl-0 = <&vin0_pins>; pinctrl-names = "default"; @@ -401,7 +401,6 @@ &pcie_bus_clk { clock-frequency = <100000000>; - status = "okay"; }; &pciec { diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 9f9e48511836..4d0c2ce59900 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -74,9 +74,8 @@ next-level-cache = <&L2_CA15>; }; - L2_CA15: cache-controller@0 { + L2_CA15: cache-controller-0 { compatible = "cache"; - reg = <0>; power-domains = <&sysc R8A7791_PD_CA15_SCU>; cache-unified; cache-level = <2>; @@ -118,6 +117,9 @@ <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&mstp4_clks R8A7791_CLK_INTC_SYS>; + clock-names = "clk"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; }; gpio0: gpio@e6050000 { @@ -1124,7 +1126,7 @@ }; /* External CAN clock */ - can_clk: can_clk { + can_clk: can { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by the board. */ @@ -1366,10 +1368,10 @@ mstp4_clks: mstp4_clks@e6150140 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; - clocks = <&cp_clk>; + clocks = <&cp_clk>, <&zs_clk>; #clock-cells = <1>; - clock-indices = <R8A7791_CLK_IRQC>; - clock-output-names = "irqc"; + clock-indices = <R8A7791_CLK_IRQC R8A7791_CLK_INTC_SYS>; + clock-output-names = "irqc", "intc-sys"; }; mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -1445,8 +1447,11 @@ compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>; clocks = <&p_clk>, - <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, - <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, + <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>, + <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>, + <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>, + <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>, + <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&p_clk>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, @@ -1777,11 +1782,11 @@ rcar_sound,dvc { dvc0: dvc-0 { - dmas = <&audma0 0xbc>; + dmas = <&audma1 0xbc>; dma-names = "tx"; }; dvc1: dvc-1 { - dmas = <&audma0 0xbe>; + dmas = <&audma1 0xbe>; dma-names = "tx"; }; }; diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index 8ecfda7a004e..0efecb232ee5 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -46,7 +46,7 @@ compatible = "arm,cortex-a15"; reg = <0>; clock-frequency = <1000000000>; - clocks = <&cpg_clocks R8A7792_CLK_Z>; + clocks = <&z_clk>; power-domains = <&sysc R8A7792_PD_CA15_CPU0>; next-level-cache = <&L2_CA15>; }; @@ -60,9 +60,8 @@ next-level-cache = <&L2_CA15>; }; - L2_CA15: cache-controller@0 { + L2_CA15: cache-controller-0 { compatible = "cache"; - reg = <0>; cache-unified; cache-level = <2>; power-domains = <&sysc R8A7792_PD_CA15_SCU>; @@ -93,6 +92,9 @@ <0 0xf1006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&mstp4_clks R8A7792_CLK_INTC_SYS>; + clock-names = "clk"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; }; irqc: interrupt-controller@e61c0000 { @@ -764,7 +766,7 @@ clocks = <&extal_clk>; #clock-cells = <1>; clock-output-names = "main", "pll0", "pll1", "pll3", - "lb", "qspi", "z"; + "lb", "qspi"; #power-domain-cells = <0>; }; @@ -776,6 +778,13 @@ clock-div = <2>; clock-mult = <1>; }; + z_clk: z { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7792_CLK_PLL0>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; zx_clk: zx { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7792_CLK_PLL1>; @@ -896,10 +905,12 @@ compatible = "renesas,r8a7792-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; - clocks = <&cp_clk>; + clocks = <&cp_clk>, <&zs_clk>; #clock-cells = <1>; - clock-indices = <R8A7792_CLK_IRQC>; - clock-output-names = "irqc"; + clock-indices = < + R8A7792_CLK_IRQC R8A7792_CLK_INTC_SYS + >; + clock-output-names = "irqc", "intc-sys"; }; mstp7_clks: mstp7_clks@e615014c { compatible = "renesas,r8a7792-mstp-clocks", diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 92fff07c5e2b..806c93f6ae8b 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -412,7 +412,6 @@ &scif_clk { clock-frequency = <14745600>; - status = "okay"; }; &sdhi0 { diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 48ce21c5e8db..4de6041d61f9 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -65,9 +65,8 @@ power-domains = <&sysc R8A7793_PD_CA15_CPU1>; }; - L2_CA15: cache-controller@0 { + L2_CA15: cache-controller-0 { compatible = "cache"; - reg = <0>; power-domains = <&sysc R8A7793_PD_CA15_SCU>; cache-unified; cache-level = <2>; @@ -109,6 +108,9 @@ <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&mstp4_clks R8A7793_CLK_INTC_SYS>; + clock-names = "clk"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; }; gpio0: gpio@e6050000 { @@ -1179,10 +1181,12 @@ mstp4_clks: mstp4_clks@e6150140 { compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; - clocks = <&cp_clk>; + clocks = <&cp_clk>, <&zs_clk>; #clock-cells = <1>; - clock-indices = <R8A7793_CLK_IRQC>; - clock-output-names = "irqc"; + clock-indices = < + R8A7793_CLK_IRQC R8A7793_CLK_INTC_SYS + >; + clock-output-names = "irqc", "intc-sys"; }; mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -1265,8 +1269,11 @@ compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>; clocks = <&p_clk>, - <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, - <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, + <&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>, + <&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>, + <&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>, + <&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>, + <&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>, <&p_clk>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, @@ -1426,11 +1433,11 @@ rcar_sound,dvc { dvc0: dvc-0 { - dmas = <&audma0 0xbc>; + dmas = <&audma1 0xbc>; dma-names = "tx"; }; dvc1: dvc-1 { - dmas = <&audma0 0xbe>; + dmas = <&audma1 0xbe>; dma-names = "tx"; }; }; diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index 569e3f0e97a5..f1eea13cdf44 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -168,7 +168,7 @@ status = "okay"; clocks = <&mstp7_clks R8A7794_CLK_DU0>, - <&mstp7_clks R8A7794_CLK_DU0>, + <&mstp7_clks R8A7794_CLK_DU1>, <&x13_clk>, <&x2_clk>; clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1"; @@ -375,7 +375,6 @@ &scif_clk { clock-frequency = <14745600>; - status = "okay"; }; &qspi { diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index cf880ac06f4b..4cb5278d104d 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -248,7 +248,6 @@ &scif_clk { clock-frequency = <14745600>; - status = "okay"; }; ðer { @@ -425,7 +424,7 @@ status = "okay"; clocks = <&mstp7_clks R8A7794_CLK_DU0>, - <&mstp7_clks R8A7794_CLK_DU0>, + <&mstp7_clks R8A7794_CLK_DU1>, <&x2_clk>, <&x3_clk>; clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1"; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 319c1069b7ee..a19b884fb258 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -43,6 +43,7 @@ compatible = "arm,cortex-a7"; reg = <0>; clock-frequency = <1000000000>; + clocks = <&z2_clk>; power-domains = <&sysc R8A7794_PD_CA7_CPU0>; next-level-cache = <&L2_CA7>; }; @@ -56,9 +57,8 @@ next-level-cache = <&L2_CA7>; }; - L2_CA7: cache-controller@0 { + L2_CA7: cache-controller-0 { compatible = "cache"; - reg = <0>; power-domains = <&sysc R8A7794_PD_CA7_SCU>; cache-unified; cache-level = <2>; @@ -75,6 +75,9 @@ <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&mstp4_clks R8A7794_CLK_INTC_SYS>; + clock-names = "clk"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; }; gpio0: gpio@e6050000 { @@ -923,7 +926,7 @@ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_DU0>, - <&mstp7_clks R8A7794_CLK_DU0>; + <&mstp7_clks R8A7794_CLK_DU1>; clock-names = "du.0", "du.1"; status = "disabled"; @@ -1062,6 +1065,13 @@ clock-div = <2>; clock-mult = <1>; }; + z2_clk: z2 { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL0>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; zg_clk: zg { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; @@ -1248,10 +1258,10 @@ mstp4_clks: mstp4_clks@e6150140 { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; - clocks = <&cp_clk>; + clocks = <&cp_clk>, <&zs_clk>; #clock-cells = <1>; - clock-indices = <R8A7794_CLK_IRQC>; - clock-output-names = "irqc"; + clock-indices = <R8A7794_CLK_IRQC R8A7794_CLK_INTC_SYS>; + clock-output-names = "irqc", "intc-sys"; }; mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -1268,19 +1278,21 @@ clocks = <&mp_clk>, <&hp_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, - <&zx_clk>; + <&zx_clk>, <&zx_clk>; #clock-cells = <1>; clock-indices = < R8A7794_CLK_EHCI R8A7794_CLK_HSUSB R8A7794_CLK_HSCIF2 R8A7794_CLK_SCIF5 R8A7794_CLK_SCIF4 R8A7794_CLK_HSCIF1 R8A7794_CLK_HSCIF0 R8A7794_CLK_SCIF3 R8A7794_CLK_SCIF2 R8A7794_CLK_SCIF1 - R8A7794_CLK_SCIF0 R8A7794_CLK_DU0 + R8A7794_CLK_SCIF0 + R8A7794_CLK_DU1 R8A7794_CLK_DU0 >; clock-output-names = "ehci", "hsusb", "hscif2", "scif5", "scif4", "hscif1", "hscif0", - "scif3", "scif2", "scif1", "scif0", "du0"; + "scif3", "scif2", "scif1", "scif0", + "du1", "du0"; }; mstp8_clks: mstp8_clks@e6150990 { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index ff9b90bfaefd..ec91325d3b6e 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -250,6 +250,8 @@ clock-names = "biu", "ciu"; fifo-depth = <0x100>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + resets = <&cru SRST_MMC0>; + reset-names = "reset"; status = "disabled"; }; @@ -262,6 +264,8 @@ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; fifo-depth = <0x100>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + resets = <&cru SRST_SDIO>; + reset-names = "reset"; status = "disabled"; }; @@ -286,6 +290,8 @@ num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + resets = <&cru SRST_EMMC>; + reset-names = "reset"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 1aff4ad22fc4..1399bc04ea77 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -545,12 +545,12 @@ }; &global_timer { - interrupts = <GIC_PPI 11 0xf04>; + interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; status = "disabled"; }; &local_timer { - interrupts = <GIC_PPI 13 0xf04>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; }; &i2c0 { diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 641607d9ad29..48a0c1cf4301 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -414,6 +414,8 @@ fifo-depth = <0x100>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + resets = <&cru SRST_EMMC>; + reset-names = "reset"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts index 21326f3e8564..30e93f694ae8 100644 --- a/arch/arm/boot/dts/rk3288-miqi.dts +++ b/arch/arm/boot/dts/rk3288-miqi.dts @@ -68,11 +68,9 @@ compatible = "gpio-leds"; work { - gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_LOW>; + gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>; label = "miqi:green:user"; - linux,default-trigger = "default-on"; - pinctrl-names = "default"; - pinctrl-0 = <&led_ctl>; + linux,default-trigger = "timer"; }; }; @@ -363,12 +361,6 @@ }; }; - leds { - led_ctl: led-ctl { - rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - sdmmc { /* * Default drive strength isn't enough to achieve even diff --git a/arch/arm/boot/dts/rk3288-phycore-rdk.dts b/arch/arm/boot/dts/rk3288-phycore-rdk.dts new file mode 100644 index 000000000000..3dda79579b51 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-phycore-rdk.dts @@ -0,0 +1,298 @@ +/* + * Device tree file for Phytec PCM-947 carrier board + * Copyright (C) 2017 PHYTEC Messtechnik GmbH + * Author: Wadim Egorov <w.egorov@phytec.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/leds-pca9532.h> +#include "rk3288-phycore-som.dtsi" + +/ { + model = "Phytec RK3288 PCM-947"; + compatible = "phytec,rk3288-pcm-947", "phytec,rk3288-phycore-som", "rockchip,rk3288"; + + user_buttons: user-buttons { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&user_button_pins>; + + button@0 { + label = "home"; + linux,code = <KEY_HOME>; + gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>; + wakeup-source; + }; + + button@1 { + label = "menu"; + linux,code = <KEY_MENU>; + gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>; + wakeup-source; + }; + }; + + vcc_host0_5v: usb-host0-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host0_vbus_drv>; + regulator-name = "vcc_host0_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&vdd_in_otg_out>; + }; + + vcc_host1_5v: usb-host1-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host1_vbus_drv>; + regulator-name = "vcc_host1_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&vdd_in_otg_out>; + }; + + vcc_otg_5v: usb-otg-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&otg_vbus_drv>; + regulator-name = "vcc_otg_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&vdd_in_otg_out>; + }; +}; + +&gmac { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + touchscreen@44 { + compatible = "st,stmpe811"; + reg = <0x44>; + }; + + adc@64 { + compatible = "maxim,max1037"; + reg = <0x64>; + }; + + i2c_rtc: rtc@68 { + compatible = "rv4162"; + reg = <0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_rtc_int>; + interrupt-parent = <&gpio5>; + interrupts = <10 0>; + }; +}; + +&i2c3 { + status = "okay"; + + i2c_eeprom_cb: eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + }; +}; + +&i2c4 { + status = "okay"; + + /* PCA9533 - 4-bit LED dimmer */ + leddim: leddimmer@62 { + compatible = "nxp,pca9533"; + reg = <0x62>; + + led1 { + label = "red:user1"; + linux,default-trigger = "none"; + type = <PCA9532_TYPE_LED>; + }; + + led2 { + label = "green:user2"; + linux,default-trigger = "none"; + type = <PCA9532_TYPE_LED>; + }; + + led3 { + label = "blue:user3"; + linux,default-trigger = "none"; + type = <PCA9532_TYPE_LED>; + }; + + led4 { + label = "red:user4"; + linux,default-trigger = "none"; + type = <PCA9532_TYPE_LED>; + }; + }; +}; + +&i2c5 { + status = "okay"; +}; + +&pinctrl { + pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma { + bias-pull-up; + drive-strength = <12>; + }; + + buttons { + user_button_pins: user-button-pins { + /* button 1 */ + rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_pull_up>, + /* button 2 */ + <8 0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + rv4162 { + i2c_rtc_int: i2c-rtc-int { + rockchip,pins = <5 10 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdmmc { + /* + * Default drive strength isn't enough to achieve even + * high-speed mode on pcm-947 board so bump up to 12 mA. + */ + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, + <6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, + <6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, + <6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + }; + + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + touchscreen { + ts_irq_pin: ts-irq-pin { + rockchip,pins = <5 15 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb_host { + host0_vbus_drv: host0-vbus-drv { + rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + host1_vbus_drv: host1-vbus-drv { + rockchip,pins = <2 0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb_otg { + otg_vbus_drv: otg-vbus-drv { + rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + vmmc-supply = <&vdd_io_sd>; + vqmmc-supply = <&vdd_io_sd>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host1 { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288-phycore-som.dtsi b/arch/arm/boot/dts/rk3288-phycore-som.dtsi new file mode 100644 index 000000000000..26cd3ad45160 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-phycore-som.dtsi @@ -0,0 +1,497 @@ +/* + * Device tree file for Phytec phyCORE-RK3288 SoM + * Copyright (C) 2017 PHYTEC Messtechnik GmbH + * Author: Wadim Egorov <w.egorov@phytec.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/net/ti-dp83867.h> +#include "rk3288.dtsi" + +/ { + model = "Phytec RK3288 phyCORE"; + compatible = "phytec,rk3288-phycore-som", "rockchip,rk3288"; + + /* + * Set the minimum memory size here and + * let the bootloader set the real size. + */ + memory { + device_type = "memory"; + reg = <0 0x8000000>; + }; + + aliases { + rtc0 = &i2c_rtc; + rtc1 = &rk818; + }; + + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + }; + + leds: user-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&user_led>; + + user { + label = "green_led"; + gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "keep"; + }; + }; + + vdd_emmc_io: vdd-emmc-io { + compatible = "regulator-fixed"; + regulator-name = "vdd_emmc_io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vdd_3v3_io>; + }; + + vdd_in_otg_out: vdd-in-otg-out { + compatible = "regulator-fixed"; + regulator-name = "vdd_in_otg_out"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vdd_misc_1v8: vdd-misc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vdd_misc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; +}; + +&cpu0 { + cpu0-supply = <&vdd_cpu>; + operating-points = < + /* KHz uV */ + 1800000 1400000 + 1608000 1350000 + 1512000 1300000 + 1416000 1200000 + 1200000 1100000 + 1008000 1050000 + 816000 1000000 + 696000 950000 + 600000 900000 + 408000 900000 + 312000 900000 + 216000 900000 + 126000 900000 + >; +}; + +&emmc { + status = "okay"; + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; + vmmc-supply = <&vdd_3v3_io>; + vqmmc-supply = <&vdd_emmc_io>; +}; + +&gmac { + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + clock_in_out = "input"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins &phy_rst &phy_int>; + phy-handle = <&phy0>; + phy-supply = <&vdd_eth_2v5>; + phy-mode = "rgmii-id"; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>; + tx_delay = <0x0>; + rx_delay = <0x0>; + + mdio0 { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + interrupt-parent = <&gpio4>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + enet-phy-lane-no-swap; + }; + }; +}; + +&hdmi { + ddc-i2c-bus = <&i2c5>; +}; + +&io_domains { + status = "okay"; + sdcard-supply = <&vdd_io_sd>; + flash0-supply = <&vdd_emmc_io>; + flash1-supply = <&vdd_misc_1v8>; + gpio1830-supply = <&vdd_3v3_io>; + gpio30-supply = <&vdd_3v3_io>; + bb-supply = <&vdd_3v3_io>; + dvp-supply = <&vdd_3v3_io>; + lcdc-supply = <&vdd_3v3_io>; + wifi-supply = <&vdd_3v3_io>; + audio-supply = <&vdd_3v3_io>; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + rk818: pmic@1c { + compatible = "rockchip,rk818"; + reg = <0x1c>; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + + vcc1-supply = <&vdd_sys>; + vcc2-supply = <&vdd_sys>; + vcc3-supply = <&vdd_sys>; + vcc4-supply = <&vdd_sys>; + boost-supply = <&vdd_in_otg_out>; + vcc6-supply = <&vdd_sys>; + vcc7-supply = <&vdd_misc_1v8>; + vcc8-supply = <&vdd_misc_1v8>; + vcc9-supply = <&vdd_3v3_io>; + vddio-supply = <&vdd_3v3_io>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1250000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_3v3_io: DCDC_REG4 { + regulator-name = "vdd_3v3_io"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_sys: DCDC_BOOST { + regulator-name = "vdd_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <5000000>; + }; + }; + + /* vcc9 */ + vdd_sd: SWITCH_REG { + regulator-name = "vdd_sd"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* vcc6 */ + vdd_eth_2v5: LDO_REG2 { + regulator-name = "vdd_eth_2v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2500000>; + }; + }; + + /* vcc7 */ + vdd_1v0: LDO_REG3 { + regulator-name = "vdd_1v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + /* vcc8 */ + vdd_1v8_lcd_ldo: LDO_REG4 { + regulator-name = "vdd_1v8_lcd_ldo"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + /* vcc8 */ + vdd_1v0_lcd: LDO_REG6 { + regulator-name = "vdd_1v0_lcd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + /* vcc7 */ + vdd_1v8_ldo: LDO_REG7 { + regulator-name = "vdd_1v8_ldo"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + /* vcc9 */ + vdd_io_sd: LDO_REG9 { + regulator-name = "vdd_io_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + }; + }; + + /* M24C32-D */ + i2c_eeprom: eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + }; + + vdd_cpu: regulator@60 { + compatible = "fcs,fan53555"; + reg = <0x60>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; + regulator-boot-on; + regulator-enable-ramp-delay = <300>; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1430000>; + regulator-ramp-delay = <8000>; + vin-supply = <&vdd_sys>; + }; +}; + +&pinctrl { + pcfg_output_high: pcfg-output-high { + output-high; + }; + + emmc { + /* + * We run eMMC at max speed; bump up drive strength. + * We also have external pulls, so disable the internal ones. + */ + emmc_clk: emmc-clk { + rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none_12ma>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none_12ma>; + }; + + emmc_bus8: emmc-bus8 { + rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_none_12ma>, + <3 1 RK_FUNC_2 &pcfg_pull_none_12ma>, + <3 2 RK_FUNC_2 &pcfg_pull_none_12ma>, + <3 3 RK_FUNC_2 &pcfg_pull_none_12ma>, + <3 4 RK_FUNC_2 &pcfg_pull_none_12ma>, + <3 5 RK_FUNC_2 &pcfg_pull_none_12ma>, + <3 6 RK_FUNC_2 &pcfg_pull_none_12ma>, + <3 7 RK_FUNC_2 &pcfg_pull_none_12ma>; + }; + }; + + gmac { + phy_int: phy-int { + rockchip,pins = <4 2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_rst: phy-rst { + rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + leds { + user_led: user-led { + rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + pmic { + pmic_int: pmic-int { + rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + /* Pin for switching state between sleep and non-sleep state */ + pmic_sleep: pmic-sleep { + rockchip,pins = <RK_GPIO0 0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vdd_1v8_ldo>; +}; + +&spi2 { + status = "okay"; + + serial_flash: flash@0 { + compatible = "micron,n25q128a13", "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <50000000>; + m25p,fast-read; + #address-cells = <1>; + #size-cells = <1>; + status = "okay"; + }; +}; + +&tsadc { + status = "okay"; + rockchip,hw-tshut-mode = <0>; + rockchip,hw-tshut-polarity = <0>; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi index 1c0bbc9b928b..f0778a46bca9 100644 --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -136,7 +136,7 @@ regulator-always-on; }; - vcc_io: REG2 { + vcc_io: vccio_codec: REG2 { regulator-name = "VCC_IO"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index 96a2e745bb93..a23a94811be8 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -81,11 +81,35 @@ }; }; + sata_pwr: sata-prw-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sata_pwr_en>; + /* Always turn on the 5V sata power connector */ + regulator-always-on; + regulator-name = "sata_pwr"; + }; + spdif_out: spdif-out { compatible = "linux,spdif-dit"; #sound-dai-cells = <0>; }; + sound-i2s { + compatible = "rockchip,rk3288-hdmi-analog"; + pinctrl-names = "default"; + pinctrl-0 = <&phone_ctl>, <&hp_det>; + rockchip,audio-codec = <&es8388>; + rockchip,hp-det-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>; + rockchip,hp-en-gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>; + rockchip,i2s-controller = <&i2s>; + rockchip,model = "I2S"; + rockchip,routing = "Analog", "LOUT2", + "Analog", "ROUT2"; + }; + sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&hym8563>; @@ -173,10 +197,28 @@ }; }; +&i2c2 { + status = "okay"; + + es8388: es8388@10 { + compatible = "everest,es8388", "everest,es8328"; + reg = <0x10>; + AVDD-supply = <&vccio_codec>; + DVDD-supply = <&vccio_codec>; + HPVDD-supply = <&vccio_codec>; + PVDD-supply = <&vccio_codec>; + clocks = <&cru SCLK_I2S0_OUT>; + }; +}; + &i2c5 { status = "okay"; }; +&i2s { + status = "okay"; +}; + &pinctrl { ir { ir_int: ir-int { @@ -190,12 +232,28 @@ }; }; + headphone { + hp_det: hp-det { + rockchip,pins = <7 7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + phone_ctl: phone-ctl { + rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + usb { host_vbus_drv: host-vbus-drv { rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + sata { + sata_pwr_en: sata-pwr-en { + rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + sdmmc { sdmmc_pwr: sdmmc-pwr { rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; @@ -224,3 +282,7 @@ &usb_host0_ehci { status = "okay"; }; + +&usb_host1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts new file mode 100644 index 000000000000..f601c78386a9 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-tinker.dts @@ -0,0 +1,536 @@ +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "rk3288.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Rockchip RK3288 Tinker Board"; + compatible = "asus,rk3288-tinker", "rockchip,rk3288"; + + memory { + reg = <0x0 0x80000000>; + device_type = "memory"; + }; + + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn>; + + button@0 { + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + label = "GPIO Key Power"; + linux,input-type = <1>; + wakeup-source; + debounce-interval = <100>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + act-led { + gpios=<&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; + linux,default-trigger="mmc0"; + }; + + heartbeat-led { + gpios=<&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>; + linux,default-trigger="heartbeat"; + }; + + pwr-led { + gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "rockchip,tinker-codec"; + simple-audio-card,mclk-fs = <512>; + + simple-audio-card,codec { + sound-dai = <&hdmi>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s>; + }; + }; + + vcc_sys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; +}; + +&cpu0 { + cpu0-supply = <&vdd_cpu>; +}; + +&gmac { + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + clock_in_out = "input"; + phy-mode = "rgmii"; + phy-supply = <&vcc33_lan>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio4 7 0>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + tx_delay = <0x30>; + rx_delay = <0x10>; + status = "ok"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c5>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + dvs-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>, + <&gpio0 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int &global_pwroff &dvs_1 &dvs_2>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_io>; + vcc9-supply = <&vcc_io>; + vcc10-supply = <&vcc_io>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc_io>; + vddio-supply = <&vcc_io>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-name = "vdd_arm"; + regulator-ramp-delay = <6000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd_gpu"; + regulator-ramp-delay = <6000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_io"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc18_ldo1: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_ldo1"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc33_mipi: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc33_mipi"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_10: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd_10"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc18_codec: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_codec"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd10_lcd: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_18: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_18"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc18_lcd: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_lcd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc33_sd: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc33_sd"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc33_lan: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc33_lan"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2s { + #sound-dai-cells = <0>; + status = "okay"; +}; + +&io_domains { + status = "okay"; + + sdcard-supply = <&vccio_sd>; +}; + +&pinctrl { + pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { + drive-strength = <8>; + }; + + pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + backlight { + bl_en: bl-en { + rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + buttons { + pwrbtn: pwrbtn { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + eth_phy { + eth_phy_pwr: eth-phy-pwr { + rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int: pmic-int { + rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO \ + &pcfg_pull_up>; + }; + + dvs_1: dvs-1 { + rockchip,pins = <RK_GPIO0 11 RK_FUNC_GPIO \ + &pcfg_pull_down>; + }; + + dvs_2: dvs-2 { + rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO \ + &pcfg_pull_down>; + }; + }; + + sdmmc { + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = <6 20 RK_FUNC_1 \ + &pcfg_pull_none_drv_8ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + }; + + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pwr_3g: pwr-3g { + rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc18_ldo1>; + status ="okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; /* wp not hooked up */ + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + status = "okay"; + vmmc-supply = <&vcc33_sd>; + vqmmc-supply = <&vccio_sd>; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host1 { + status = "okay"; +}; + +&usb_otg { + status= "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index df8a0dbe9d91..ad5d6022e95f 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -236,6 +236,8 @@ fifo-depth = <0x100>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; reg = <0xff0c0000 0x4000>; + resets = <&cru SRST_MMC0>; + reset-names = "reset"; status = "disabled"; }; @@ -248,6 +250,8 @@ fifo-depth = <0x100>; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; reg = <0xff0d0000 0x4000>; + resets = <&cru SRST_SDIO0>; + reset-names = "reset"; status = "disabled"; }; @@ -260,6 +264,8 @@ fifo-depth = <0x100>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; reg = <0xff0e0000 0x4000>; + resets = <&cru SRST_SDIO1>; + reset-names = "reset"; status = "disabled"; }; @@ -272,6 +278,8 @@ fifo-depth = <0x100>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; reg = <0xff0f0000 0x4000>; + resets = <&cru SRST_EMMC>; + reset-names = "reset"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 0b45811cf28b..4aa6f60d6a22 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -132,14 +132,14 @@ global_timer: global-timer@1013c200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x1013c200 0x20>; - interrupts = <GIC_PPI 11 0x304>; + interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>; clocks = <&cru CORE_PERI>; }; local_timer: local-timer@1013c600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x1013c600 0x20>; - interrupts = <GIC_PPI 13 0x304>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>; clocks = <&cru CORE_PERI>; }; @@ -223,7 +223,11 @@ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; clock-names = "biu", "ciu"; + dmas = <&dmac2 1>; + dma-names = "rx-tx"; fifo-depth = <256>; + resets = <&cru SRST_SDMMC>; + reset-names = "reset"; status = "disabled"; }; @@ -233,7 +237,11 @@ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>; clock-names = "biu", "ciu"; + dmas = <&dmac2 3>; + dma-names = "rx-tx"; fifo-depth = <256>; + resets = <&cru SRST_SDIO>; + reset-names = "reset"; status = "disabled"; }; @@ -243,7 +251,11 @@ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>; clock-names = "biu", "ciu"; + dmas = <&dmac2 4>; + dma-names = "rx-tx"; fifo-depth = <256>; + resets = <&cru SRST_EMMC>; + reset-names = "reset"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi index 0ccb414cd268..c55cbb3af2c0 100644 --- a/arch/arm/boot/dts/s3c64xx.dtsi +++ b/arch/arm/boot/dts/s3c64xx.dtsi @@ -94,13 +94,12 @@ }; watchdog: watchdog@7e004000 { - compatible = "samsung,s3c2410-wdt"; + compatible = "samsung,s3c6410-wdt"; reg = <0x7e004000 0x1000>; interrupt-parent = <&vic0>; interrupts = <26>; clock-names = "watchdog"; clocks = <&clocks PCLK_WDT>; - status = "disabled"; }; i2c0: i2c@7f004000 { diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index a853918be43f..726c5d0dbd5b 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -310,7 +310,7 @@ }; watchdog: watchdog@e2700000 { - compatible = "samsung,s3c2410-wdt"; + compatible = "samsung,s3c6410-wdt"; reg = <0xe2700000 0x1000>; interrupt-parent = <&vic0>; interrupts = <26>; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 528b4e9c6d3d..8067c71c3a38 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -1305,6 +1305,11 @@ status = "okay"; }; + sfrbu: sfr@fc05c000 { + compatible = "atmel,sama5d2-sfrbu", "syscon"; + reg = <0xfc05c000 0x20>; + }; + chipid@fc069000 { compatible = "atmel,sama5d2-chipid"; reg = <0xfc069000 0x8>; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 2c43c4d85dee..b2674bdb8e6a 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -15,7 +15,6 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include "skeleton.dtsi" #include <dt-bindings/reset/altr,rst-mgr.h> / { @@ -38,13 +37,13 @@ #size-cells = <0>; enable-method = "altr,socfpga-smp"; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <0>; next-level-cache = <&L2>; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <1>; @@ -52,6 +51,15 @@ }; }; + pmu: pmu@ff111000 { + compatible = "arm,cortex-a9-pmu"; + interrupt-parent = <&intc>; + interrupts = <0 176 4>, <0 177 4>; + interrupt-affinity = <&cpu0>, <&cpu1>; + reg = <0xff111000 0x1000>, + <0xff113000 0x1000>; + }; + intc: intc@fffed000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; @@ -145,7 +153,7 @@ compatible = "fixed-clock"; }; - main_pll: main_pll { + main_pll: main_pll@40 { #address-cells = <1>; #size-cells = <0>; #clock-cells = <0>; @@ -153,7 +161,7 @@ clocks = <&osc1>; reg = <0x40>; - mpuclk: mpuclk { + mpuclk: mpuclk@48 { #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&main_pll>; @@ -161,7 +169,7 @@ reg = <0x48>; }; - mainclk: mainclk { + mainclk: mainclk@4c { #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&main_pll>; @@ -169,7 +177,7 @@ reg = <0x4C>; }; - dbg_base_clk: dbg_base_clk { + dbg_base_clk: dbg_base_clk@50 { #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&main_pll>, <&osc1>; @@ -177,21 +185,21 @@ reg = <0x50>; }; - main_qspi_clk: main_qspi_clk { + main_qspi_clk: main_qspi_clk@54 { #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&main_pll>; reg = <0x54>; }; - main_nand_sdmmc_clk: main_nand_sdmmc_clk { + main_nand_sdmmc_clk: main_nand_sdmmc_clk@58 { #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&main_pll>; reg = <0x58>; }; - cfg_h2f_usr0_clk: cfg_h2f_usr0_clk { + cfg_h2f_usr0_clk: cfg_h2f_usr0_clk@5c { #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&main_pll>; @@ -199,7 +207,7 @@ }; }; - periph_pll: periph_pll { + periph_pll: periph_pll@80 { #address-cells = <1>; #size-cells = <0>; #clock-cells = <0>; @@ -207,42 +215,42 @@ clocks = <&osc1>, <&osc2>, <&f2s_periph_ref_clk>; reg = <0x80>; - emac0_clk: emac0_clk { + emac0_clk: emac0_clk@88 { #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&periph_pll>; reg = <0x88>; }; - emac1_clk: emac1_clk { + emac1_clk: emac1_clk@8c { #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&periph_pll>; reg = <0x8C>; }; - per_qspi_clk: per_qsi_clk { + per_qspi_clk: per_qsi_clk@90 { #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&periph_pll>; reg = <0x90>; }; - per_nand_mmc_clk: per_nand_mmc_clk { + per_nand_mmc_clk: per_nand_mmc_clk@94 { #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&periph_pll>; reg = <0x94>; }; - per_base_clk: per_base_clk { + per_base_clk: per_base_clk@98 { #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&periph_pll>; reg = <0x98>; }; - h2f_usr1_clk: h2f_usr1_clk { + h2f_usr1_clk: h2f_usr1_clk@9c { #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&periph_pll>; @@ -250,7 +258,7 @@ }; }; - sdram_pll: sdram_pll { + sdram_pll: sdram_pll@c0 { #address-cells = <1>; #size-cells = <0>; #clock-cells = <0>; @@ -258,28 +266,28 @@ clocks = <&osc1>, <&osc2>, <&f2s_sdram_ref_clk>; reg = <0xC0>; - ddr_dqs_clk: ddr_dqs_clk { + ddr_dqs_clk: ddr_dqs_clk@c8 { #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&sdram_pll>; reg = <0xC8>; }; - ddr_2x_dqs_clk: ddr_2x_dqs_clk { + ddr_2x_dqs_clk: ddr_2x_dqs_clk@cc { #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&sdram_pll>; reg = <0xCC>; }; - ddr_dq_clk: ddr_dq_clk { + ddr_dq_clk: ddr_dq_clk@d0 { #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&sdram_pll>; reg = <0xD0>; }; - h2f_usr2_clk: h2f_usr2_clk { + h2f_usr2_clk: h2f_usr2_clk@d4 { #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&sdram_pll>; @@ -678,7 +686,7 @@ status = "disabled"; }; - eccmgr: eccmgr@ffd08140 { + eccmgr: eccmgr { compatible = "altr,socfpga-ecc-manager"; #address-cells = <1>; #size-cells = <1>; @@ -879,7 +887,7 @@ dma-names = "tx", "rx"; }; - usbphy0: usbphy@0 { + usbphy0: usbphy { #phy-cells = <0>; compatible = "usb-nop-xceiv"; status = "okay"; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 6b0b7463f36f..bead79e4b2aa 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -14,7 +14,6 @@ * this program. If not, see <http://www.gnu.org/licenses/>. */ -#include "skeleton.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/altr,rst-mgr-a10.h> @@ -119,7 +118,7 @@ compatible = "fixed-clock"; }; - main_pll: main_pll { + main_pll: main_pll@40 { #address-cells = <1>; #size-cells = <0>; #clock-cells = <0>; @@ -142,35 +141,35 @@ div-reg = <0x144 0 11>; }; - main_emaca_clk: main_emaca_clk { + main_emaca_clk: main_emaca_clk@68 { #clock-cells = <0>; compatible = "altr,socfpga-a10-perip-clk"; clocks = <&main_pll>; reg = <0x68>; }; - main_emacb_clk: main_emacb_clk { + main_emacb_clk: main_emacb_clk@6c { #clock-cells = <0>; compatible = "altr,socfpga-a10-perip-clk"; clocks = <&main_pll>; reg = <0x6C>; }; - main_emac_ptp_clk: main_emac_ptp_clk { + main_emac_ptp_clk: main_emac_ptp_clk@70 { #clock-cells = <0>; compatible = "altr,socfpga-a10-perip-clk"; clocks = <&main_pll>; reg = <0x70>; }; - main_gpio_db_clk: main_gpio_db_clk { + main_gpio_db_clk: main_gpio_db_clk@74 { #clock-cells = <0>; compatible = "altr,socfpga-a10-perip-clk"; clocks = <&main_pll>; reg = <0x74>; }; - main_sdmmc_clk: main_sdmmc_clk { + main_sdmmc_clk: main_sdmmc_clk@78 { #clock-cells = <0>; compatible = "altr,socfpga-a10-perip-clk" ; @@ -178,28 +177,28 @@ reg = <0x78>; }; - main_s2f_usr0_clk: main_s2f_usr0_clk { + main_s2f_usr0_clk: main_s2f_usr0_clk@7c { #clock-cells = <0>; compatible = "altr,socfpga-a10-perip-clk"; clocks = <&main_pll>; reg = <0x7C>; }; - main_s2f_usr1_clk: main_s2f_usr1_clk { + main_s2f_usr1_clk: main_s2f_usr1_clk@80 { #clock-cells = <0>; compatible = "altr,socfpga-a10-perip-clk"; clocks = <&main_pll>; reg = <0x80>; }; - main_hmc_pll_ref_clk: main_hmc_pll_ref_clk { + main_hmc_pll_ref_clk: main_hmc_pll_ref_clk@84 { #clock-cells = <0>; compatible = "altr,socfpga-a10-perip-clk"; clocks = <&main_pll>; reg = <0x84>; }; - main_periph_ref_clk: main_periph_ref_clk { + main_periph_ref_clk: main_periph_ref_clk@9c { #clock-cells = <0>; compatible = "altr,socfpga-a10-perip-clk"; clocks = <&main_pll>; @@ -207,7 +206,7 @@ }; }; - periph_pll: periph_pll { + periph_pll: periph_pll@c0 { #address-cells = <1>; #size-cells = <0>; #clock-cells = <0>; @@ -230,56 +229,56 @@ div-reg = <0x144 16 11>; }; - peri_emaca_clk: peri_emaca_clk { + peri_emaca_clk: peri_emaca_clk@e8 { #clock-cells = <0>; compatible = "altr,socfpga-a10-perip-clk"; clocks = <&periph_pll>; reg = <0xE8>; }; - peri_emacb_clk: peri_emacb_clk { + peri_emacb_clk: peri_emacb_clk@ec { #clock-cells = <0>; compatible = "altr,socfpga-a10-perip-clk"; clocks = <&periph_pll>; reg = <0xEC>; }; - peri_emac_ptp_clk: peri_emac_ptp_clk { + peri_emac_ptp_clk: peri_emac_ptp_clk@f0 { #clock-cells = <0>; compatible = "altr,socfpga-a10-perip-clk"; clocks = <&periph_pll>; reg = <0xF0>; }; - peri_gpio_db_clk: peri_gpio_db_clk { + peri_gpio_db_clk: peri_gpio_db_clk@f4 { #clock-cells = <0>; compatible = "altr,socfpga-a10-perip-clk"; clocks = <&periph_pll>; reg = <0xF4>; }; - peri_sdmmc_clk: peri_sdmmc_clk { + peri_sdmmc_clk: peri_sdmmc_clk@f8 { #clock-cells = <0>; compatible = "altr,socfpga-a10-perip-clk"; clocks = <&periph_pll>; reg = <0xF8>; }; - peri_s2f_usr0_clk: peri_s2f_usr0_clk { + peri_s2f_usr0_clk: peri_s2f_usr0_clk@fc { #clock-cells = <0>; compatible = "altr,socfpga-a10-perip-clk"; clocks = <&periph_pll>; reg = <0xFC>; }; - peri_s2f_usr1_clk: peri_s2f_usr1_clk { + peri_s2f_usr1_clk: peri_s2f_usr1_clk@100 { #clock-cells = <0>; compatible = "altr,socfpga-a10-perip-clk"; clocks = <&periph_pll>; reg = <0x100>; }; - peri_hmc_pll_ref_clk: peri_hmc_pll_ref_clk { + peri_hmc_pll_ref_clk: peri_hmc_pll_ref_clk@104 { #clock-cells = <0>; compatible = "altr,socfpga-a10-perip-clk"; clocks = <&periph_pll>; @@ -287,7 +286,7 @@ }; }; - mpu_free_clk: mpu_free_clk { + mpu_free_clk: mpu_free_clk@60 { #clock-cells = <0>; compatible = "altr,socfpga-a10-perip-clk"; clocks = <&main_mpu_base_clk>, <&peri_mpu_base_clk>, @@ -296,7 +295,7 @@ reg = <0x60>; }; - noc_free_clk: noc_free_clk { + noc_free_clk: noc_free_clk@64 { #clock-cells = <0>; compatible = "altr,socfpga-a10-perip-clk"; clocks = <&main_noc_base_clk>, <&peri_noc_base_clk>, @@ -305,7 +304,7 @@ reg = <0x64>; }; - s2f_user1_free_clk: s2f_user1_free_clk { + s2f_user1_free_clk: s2f_user1_free_clk@104 { #clock-cells = <0>; compatible = "altr,socfpga-a10-perip-clk"; clocks = <&main_s2f_usr1_clk>, <&peri_s2f_usr1_clk>, @@ -314,7 +313,7 @@ reg = <0x104>; }; - sdmmc_free_clk: sdmmc_free_clk { + sdmmc_free_clk: sdmmc_free_clk@f8 { #clock-cells = <0>; compatible = "altr,socfpga-a10-perip-clk"; clocks = <&main_sdmmc_clk>, <&peri_sdmmc_clk>, @@ -649,7 +648,7 @@ reg = <0xffe00000 0x40000>; }; - eccmgr: eccmgr@ffd06000 { + eccmgr: eccmgr { compatible = "altr,socfpga-a10-ecc-manager"; altr,sysmgr-syscon = <&sysmgr>; #address-cells = <1>; @@ -806,7 +805,7 @@ status = "disabled"; }; - usbphy0: usbphy@0 { + usbphy0: usbphy { #phy-cells = <0>; compatible = "usb-nop-xceiv"; status = "okay"; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi index c57e6cea0d83..94e088473823 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi @@ -30,7 +30,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { name = "memory"; device_type = "memory"; reg = <0x0 0x40000000>; /* 1GB */ @@ -121,6 +121,11 @@ gpio-controller; #gpio-cells = <2>; }; + + a10sr_rst: reset-controller { + compatible = "altr,a10sr-reset"; + #reset-cells = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts index 8672edf9ba4e..aac4feea86f3 100644 --- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts @@ -26,7 +26,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { name = "memory"; device_type = "memory"; reg = <0x0 0x40000000>; /* 1GB */ diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts index 5ecd2ef405e3..7b49395452b6 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts @@ -25,7 +25,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { name = "memory"; device_type = "memory"; reg = <0x0 0x40000000>; /* 1GB */ diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi index 6ad3b1eb9b86..3c03da6b8b1d 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi +++ b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi @@ -21,7 +21,7 @@ model = "Aries/DENX MCV"; compatible = "altr,socfpga-cyclone5", "altr,socfpga"; - memory { + memory@0 { name = "memory"; device_type = "memory"; reg = <0x0 0x40000000>; /* 1 GiB */ diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts index e5a98e5696ca..21e397287e29 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts @@ -71,7 +71,6 @@ stmpe_touchscreen { compatible = "st,stmpe-ts"; - reg = <0>; ts,sample-time = <4>; ts,mod-12b = <1>; ts,ref-sel = <0>; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts index 7ea32c81e720..155829f9eba1 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts @@ -26,7 +26,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { name = "memory"; device_type = "memory"; reg = <0x0 0x40000000>; /* 1GB */ diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts index a0c90b3bdfd1..a4a555c19d94 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts @@ -26,7 +26,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { name = "memory"; device_type = "memory"; reg = <0x0 0x40000000>; /* 1GB */ diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts index c3d52f27b21e..53bf99eef66d 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts @@ -25,7 +25,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { name = "memory"; device_type = "memory"; reg = <0x0 0x40000000>; /* 1GB */ @@ -60,18 +60,18 @@ &leds { compatible = "gpio-leds"; - led@0 { + led0 { label = "led:green:heartbeat"; gpios = <&porta 28 1>; linux,default-trigger = "heartbeat"; }; - led@1 { + led1 { label = "led:green:D7"; gpios = <&portb 19 1>; }; - led@2 { + led2 { label = "led:green:D8"; gpios = <&portb 25 1>; }; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts index 5b7e3c27e6e9..8860dd2e242c 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts @@ -28,7 +28,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { name = "memory"; device_type = "memory"; reg = <0x0 0x40000000>; @@ -121,3 +121,24 @@ &usb1 { status = "okay"; }; + +&qspi { + status = "okay"; + + flash0: n25q512a@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q512a"; + reg = <0>; + spi-max-frequency = <100000000>; + + m25p,fast-read; + cdns,page-size = <256>; + cdns,block-size = <16>; + cdns,read-delay = <4>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + }; +}; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts index 363ee62457fe..893198049397 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts @@ -57,7 +57,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { name = "memory"; device_type = "memory"; reg = <0x0 0x40000000>; /* 1GB */ diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts index f9345e02ca49..dfe2193cd4d5 100644 --- a/arch/arm/boot/dts/socfpga_vt.dts +++ b/arch/arm/boot/dts/socfpga_vt.dts @@ -26,7 +26,7 @@ bootargs = "console=ttyS0,57600"; }; - memory { + memory@0 { name = "memory"; device_type = "memory"; reg = <0x0 0x40000000>; /* 1 GB */ diff --git a/arch/arm/boot/dts/spear600-evb.dts b/arch/arm/boot/dts/spear600-evb.dts index d865a891776d..c67e76c8ba5d 100644 --- a/arch/arm/boot/dts/spear600-evb.dts +++ b/arch/arm/boot/dts/spear600-evb.dts @@ -22,95 +22,91 @@ device_type = "memory"; reg = <0 0x10000000>; }; +}; - ahb { - clcd@fc200000 { - status = "okay"; - }; +&clcd { + status = "okay"; +}; - dma@fc400000 { - status = "okay"; - }; +&dmac { + status = "okay"; +}; - ehci@e1800000 { - status = "okay"; - }; +&ehci_usb0 { + status = "okay"; +}; - ehci@e2000000 { - status = "okay"; - }; +&ehci_usb1 { + status = "okay"; +}; - gmac: ethernet@e0800000 { - phy-mode = "gmii"; - status = "okay"; - }; +&gmac { + phy-mode = "gmii"; + status = "okay"; +}; - ohci@e1900000 { - status = "okay"; - }; +&ohci_usb0 { + status = "okay"; +}; - ohci@e2100000 { - status = "okay"; - }; +&ohci_usb1 { + status = "okay"; +}; - smi: flash@fc000000 { - status = "okay"; - clock-rate=<50000000>; - - flash@f8000000 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0xf8000000 0x800000>; - st,smi-fast-mode; - - partition@0 { - label = "xloader"; - reg = <0x0 0x10000>; - }; - partition@10000 { - label = "u-boot"; - reg = <0x10000 0x50000>; - }; - partition@60000 { - label = "environment"; - reg = <0x60000 0x10000>; - }; - partition@70000 { - label = "dtb"; - reg = <0x70000 0x10000>; - }; - partition@80000 { - label = "linux"; - reg = <0x80000 0x310000>; - }; - partition@390000 { - label = "rootfs"; - reg = <0x390000 0x0>; - }; - }; - }; +&smi { + status = "okay"; + clock-rate = <50000000>; - apb { - serial@d0000000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <>; - }; + flash@f8000000 { + reg = <0xf8000000 0x800000>; + st,smi-fast-mode; - serial@d0080000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <>; - }; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; - rtc@fc900000 { - status = "okay"; + partition@0 { + label = "xloader"; + reg = <0x0 0x10000>; }; - - i2c@d0200000 { - clock-frequency = <400000>; - status = "okay"; + partition@10000 { + label = "u-boot"; + reg = <0x10000 0x50000>; + }; + partition@60000 { + label = "environment"; + reg = <0x60000 0x10000>; + }; + partition@70000 { + label = "dtb"; + reg = <0x70000 0x10000>; + }; + partition@80000 { + label = "linux"; + reg = <0x80000 0x310000>; + }; + partition@390000 { + label = "rootfs"; + reg = <0x390000 0x0>; }; }; }; }; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&i2c { + clock-frequency = <400000>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi index 9f60a7b6a42b..6b32d20acc9f 100644 --- a/arch/arm/boot/dts/spear600.dtsi +++ b/arch/arm/boot/dts/spear600.dtsi @@ -49,7 +49,7 @@ #interrupt-cells = <1>; }; - clcd@fc200000 { + clcd: clcd@fc200000 { compatible = "arm,pl110", "arm,primecell"; reg = <0xfc200000 0x1000>; interrupt-parent = <&vic1>; @@ -57,7 +57,7 @@ status = "disabled"; }; - dma@fc400000 { + dmac: dma@fc400000 { compatible = "arm,pl080", "arm,primecell"; reg = <0xfc400000 0x1000>; interrupt-parent = <&vic1>; @@ -97,7 +97,7 @@ status = "disabled"; }; - ehci@e1800000 { + ehci_usb0: ehci@e1800000 { compatible = "st,spear600-ehci", "usb-ehci"; reg = <0xe1800000 0x1000>; interrupt-parent = <&vic1>; @@ -105,7 +105,7 @@ status = "disabled"; }; - ehci@e2000000 { + ehci_usb1: ehci@e2000000 { compatible = "st,spear600-ehci", "usb-ehci"; reg = <0xe2000000 0x1000>; interrupt-parent = <&vic1>; @@ -113,7 +113,7 @@ status = "disabled"; }; - ohci@e1900000 { + ohci_usb0: ohci@e1900000 { compatible = "st,spear600-ohci", "usb-ohci"; reg = <0xe1900000 0x1000>; interrupt-parent = <&vic1>; @@ -121,7 +121,7 @@ status = "disabled"; }; - ohci@e2100000 { + ohci_usb1: ohci@e2100000 { compatible = "st,spear600-ohci", "usb-ohci"; reg = <0xe2100000 0x1000>; interrupt-parent = <&vic1>; @@ -135,7 +135,7 @@ compatible = "simple-bus"; ranges = <0xd0000000 0xd0000000 0x30000000>; - serial@d0000000 { + uart0: serial@d0000000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xd0000000 0x1000>; interrupt-parent = <&vic0>; @@ -143,7 +143,7 @@ status = "disabled"; }; - serial@d0080000 { + uart1: serial@d0080000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xd0080000 0x1000>; interrupt-parent = <&vic0>; @@ -181,7 +181,7 @@ interrupts = <4>; }; - i2c@d0200000 { + i2c: i2c@d0200000 { #address-cells = <1>; #size-cells = <0>; compatible = "snps,designware-i2c"; @@ -191,7 +191,7 @@ status = "disabled"; }; - rtc@fc900000 { + rtc: rtc@fc900000 { compatible = "st,spear600-rtc"; reg = <0xfc900000 0x1000>; interrupts = <10>; @@ -204,6 +204,14 @@ interrupt-parent = <&vic0>; interrupts = <16>; }; + + adc: adc@d820b000 { + compatible = "st,spear600-adc"; + reg = <0xd820b000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <6>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index 044184580326..12c0757594d7 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -464,6 +464,8 @@ clock-names = "ssc"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -476,6 +478,8 @@ clock-names = "ssc"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -488,6 +492,8 @@ clock-names = "ssc"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi3_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -500,6 +506,8 @@ clock-names = "ssc"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi4_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -513,6 +521,8 @@ clock-names = "ssc"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi10_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -525,6 +535,8 @@ clock-names = "ssc"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi11_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -537,6 +549,8 @@ clock-names = "ssc"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi12_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -789,7 +803,7 @@ status = "okay"; }; - st231_gp0: remote-processor { + st231_gp0: st231-gp0@0 { compatible = "st,st231-rproc"; memory-region = <&gp0_reserved>; resets = <&softreset STIH407_ST231_GP0_SOFTRESET>; @@ -802,7 +816,7 @@ mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>; }; - st231_delta: remote-processor { + st231_delta: st231-delta@0 { compatible = "st,st231-rproc"; memory-region = <&delta_reserved>; resets = <&softreset STIH407_ST231_DMU_SOFTRESET>; diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index 3c99466989b1..b6331146aa02 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -167,6 +167,34 @@ status = "okay"; }; +&timers1 { + status = "okay"; + + pwm { + pinctrl-0 = <&pwm1_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + timer@0 { + status = "okay"; + }; +}; + +&timers3 { + status = "okay"; + + pwm { + pinctrl-0 = <&pwm3_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + timer@2 { + status = "okay"; + }; +}; + &usart1 { pinctrl-0 = <&usart1_pins_a>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts index 0dc18a0f0940..69a957963fa8 100644 --- a/arch/arm/boot/dts/stm32746g-eval.dts +++ b/arch/arm/boot/dts/stm32746g-eval.dts @@ -93,6 +93,10 @@ status = "okay"; }; +&rtc { + status = "okay"; +}; + &usart1 { pinctrl-0 = <&usart1_pins_a>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts index 9222b9f37bc0..191fa50e34eb 100644 --- a/arch/arm/boot/dts/stm32f429-disco.dts +++ b/arch/arm/boot/dts/stm32f429-disco.dts @@ -88,6 +88,14 @@ gpios = <&gpioa 0 0>; }; }; + + /* This turns on vbus for otg for host mode (dwc2) */ + vcc5v_otg: vcc5v-otg-regulator { + compatible = "regulator-fixed"; + gpio = <&gpioc 4 0>; + regulator-name = "vcc5_host1"; + regulator-always-on; + }; }; &clk_hse { @@ -105,3 +113,11 @@ pinctrl-names = "default"; status = "okay"; }; + +&usbotg_hs { + compatible = "st,stm32f4x9-fsotg"; + dr_mode = "host"; + pinctrl-0 = <&usbotg_fs_pins_b>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index ee0da970e8ad..b2a2b5c38caa 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -450,6 +450,8 @@ clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC1)>; interrupt-parent = <&adc>; interrupts = <0>; + dmas = <&dma2 0 0 0x400 0x0>; + dma-names = "rx"; status = "disabled"; }; @@ -460,6 +462,8 @@ clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC2)>; interrupt-parent = <&adc>; interrupts = <1>; + dmas = <&dma2 3 1 0x400 0x0>; + dma-names = "rx"; status = "disabled"; }; @@ -470,6 +474,8 @@ clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC3)>; interrupt-parent = <&adc>; interrupts = <2>; + dmas = <&dma2 1 2 0x400 0x0>; + dma-names = "rx"; status = "disabled"; }; }; @@ -666,6 +672,28 @@ }; }; + usbotg_fs_pins_a: usbotg_fs@0 { + pins { + pinmux = <STM32F429_PA10_FUNC_OTG_FS_ID>, + <STM32F429_PA11_FUNC_OTG_FS_DM>, + <STM32F429_PA12_FUNC_OTG_FS_DP>; + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; + + usbotg_fs_pins_b: usbotg_fs@1 { + pins { + pinmux = <STM32F429_PB12_FUNC_OTG_HS_ID>, + <STM32F429_PB14_FUNC_OTG_HS_DM>, + <STM32F429_PB15_FUNC_OTG_HS_DP>; + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; + usbotg_hs_pins_a: usbotg_hs@0 { pins { pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>, @@ -805,6 +833,15 @@ status = "disabled"; }; + usbotg_fs: usb@50000000 { + compatible = "st,stm32f4x9-fsotg"; + reg = <0x50000000 0x40000>; + interrupts = <67>; + clocks = <&rcc 0 39>; + clock-names = "otg"; + status = "disabled"; + }; + rng: rng@50060800 { compatible = "st,stm32-rng"; reg = <0x50060800 0x400>; diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts index 0dd56ef574fa..75470c34b92c 100644 --- a/arch/arm/boot/dts/stm32f469-disco.dts +++ b/arch/arm/boot/dts/stm32f469-disco.dts @@ -68,6 +68,15 @@ soc { dma-ranges = <0xc0000000 0x0 0x10000000>; }; + + /* This turns on vbus for otg for host mode (dwc2) */ + vcc5v_otg: vcc5v-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpiob 2 0>; + regulator-name = "vcc5_host1"; + regulator-always-on; + }; }; &rcc { @@ -115,3 +124,10 @@ pinctrl-names = "default"; status = "okay"; }; + +&usbotg_fs { + dr_mode = "host"; + pinctrl-0 = <&usbotg_fs_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi index 755fb923c07b..c2765ce12e2e 100644 --- a/arch/arm/boot/dts/stm32f746.dtsi +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -43,6 +43,8 @@ #include "skeleton.dtsi" #include "armv7-m.dtsi" #include <dt-bindings/pinctrl/stm32f746-pinfunc.h> +#include <dt-bindings/clock/stm32fx-clock.h> +#include <dt-bindings/mfd/stm32f7-rcc.h> / { clocks { @@ -51,6 +53,24 @@ compatible = "fixed-clock"; clock-frequency = <0>; }; + + clk-lse { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + clk-lsi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32000>; + }; + + clk_i2s_ckin: clk-i2s-ckin { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <48000000>; + }; }; soc { @@ -58,7 +78,7 @@ compatible = "st,stm32-timer"; reg = <0x40000000 0x400>; interrupts = <28>; - clocks = <&rcc 0 128>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM2)>; status = "disabled"; }; @@ -66,7 +86,7 @@ compatible = "st,stm32-timer"; reg = <0x40000400 0x400>; interrupts = <29>; - clocks = <&rcc 0 129>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM3)>; status = "disabled"; }; @@ -74,7 +94,7 @@ compatible = "st,stm32-timer"; reg = <0x40000800 0x400>; interrupts = <30>; - clocks = <&rcc 0 130>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM4)>; status = "disabled"; }; @@ -82,14 +102,14 @@ compatible = "st,stm32-timer"; reg = <0x40000c00 0x400>; interrupts = <50>; - clocks = <&rcc 0 131>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>; }; timer6: timer@40001000 { compatible = "st,stm32-timer"; reg = <0x40001000 0x400>; interrupts = <54>; - clocks = <&rcc 0 132>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM6)>; status = "disabled"; }; @@ -97,7 +117,21 @@ compatible = "st,stm32-timer"; reg = <0x40001400 0x400>; interrupts = <55>; - clocks = <&rcc 0 133>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM7)>; + status = "disabled"; + }; + + rtc: rtc@40002800 { + compatible = "st,stm32-rtc"; + reg = <0x40002800 0x400>; + clocks = <&rcc 1 CLK_RTC>; + clock-names = "ck_rtc"; + assigned-clocks = <&rcc 1 CLK_RTC>; + assigned-clock-parents = <&rcc 1 CLK_LSE>; + interrupt-parent = <&exti>; + interrupts = <17 1>; + interrupt-names = "alarm"; + st,syscfg = <&pwrcfg>; status = "disabled"; }; @@ -105,7 +139,7 @@ compatible = "st,stm32f7-usart", "st,stm32f7-uart"; reg = <0x40004400 0x400>; interrupts = <38>; - clocks = <&rcc 0 145>; + clocks = <&rcc 1 CLK_USART2>; status = "disabled"; }; @@ -113,7 +147,7 @@ compatible = "st,stm32f7-usart", "st,stm32f7-uart"; reg = <0x40004800 0x400>; interrupts = <39>; - clocks = <&rcc 0 146>; + clocks = <&rcc 1 CLK_USART3>; status = "disabled"; }; @@ -121,7 +155,7 @@ compatible = "st,stm32f7-uart"; reg = <0x40004c00 0x400>; interrupts = <52>; - clocks = <&rcc 0 147>; + clocks = <&rcc 1 CLK_UART4>; status = "disabled"; }; @@ -129,7 +163,7 @@ compatible = "st,stm32f7-uart"; reg = <0x40005000 0x400>; interrupts = <53>; - clocks = <&rcc 0 148>; + clocks = <&rcc 1 CLK_UART5>; status = "disabled"; }; @@ -137,7 +171,7 @@ compatible = "st,stm32f7-usart", "st,stm32f7-uart"; reg = <0x40007800 0x400>; interrupts = <82>; - clocks = <&rcc 0 158>; + clocks = <&rcc 1 CLK_UART7>; status = "disabled"; }; @@ -145,7 +179,7 @@ compatible = "st,stm32f7-usart", "st,stm32f7-uart"; reg = <0x40007c00 0x400>; interrupts = <83>; - clocks = <&rcc 0 159>; + clocks = <&rcc 1 CLK_UART8>; status = "disabled"; }; @@ -153,7 +187,7 @@ compatible = "st,stm32f7-usart", "st,stm32f7-uart"; reg = <0x40011000 0x400>; interrupts = <37>; - clocks = <&rcc 0 164>; + clocks = <&rcc 1 CLK_USART1>; status = "disabled"; }; @@ -161,7 +195,7 @@ compatible = "st,stm32f7-usart", "st,stm32f7-uart"; reg = <0x40011400 0x400>; interrupts = <71>; - clocks = <&rcc 0 165>; + clocks = <&rcc 1 CLK_USART6>; status = "disabled"; }; @@ -178,6 +212,11 @@ interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>; }; + pwrcfg: power-config@40007000 { + compatible = "syscon"; + reg = <0x40007000 0x400>; + }; + pin-controller { #address-cells = <1>; #size-cells = <1>; @@ -191,7 +230,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x0 0x400>; - clocks = <&rcc 0 256>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOA)>; st,bank-name = "GPIOA"; }; @@ -199,7 +238,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x400 0x400>; - clocks = <&rcc 0 257>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOB)>; st,bank-name = "GPIOB"; }; @@ -207,7 +246,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x800 0x400>; - clocks = <&rcc 0 258>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOC)>; st,bank-name = "GPIOC"; }; @@ -215,7 +254,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0xc00 0x400>; - clocks = <&rcc 0 259>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOD)>; st,bank-name = "GPIOD"; }; @@ -223,7 +262,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x1000 0x400>; - clocks = <&rcc 0 260>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOE)>; st,bank-name = "GPIOE"; }; @@ -231,7 +270,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x1400 0x400>; - clocks = <&rcc 0 261>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOF)>; st,bank-name = "GPIOF"; }; @@ -239,7 +278,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x1800 0x400>; - clocks = <&rcc 0 262>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOG)>; st,bank-name = "GPIOG"; }; @@ -247,7 +286,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x1c00 0x400>; - clocks = <&rcc 0 263>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOH)>; st,bank-name = "GPIOH"; }; @@ -255,7 +294,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x2000 0x400>; - clocks = <&rcc 0 264>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOI)>; st,bank-name = "GPIOI"; }; @@ -263,7 +302,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x2400 0x400>; - clocks = <&rcc 0 265>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOJ)>; st,bank-name = "GPIOJ"; }; @@ -271,7 +310,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x2800 0x400>; - clocks = <&rcc 0 266>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOK)>; st,bank-name = "GPIOK"; }; @@ -298,9 +337,12 @@ rcc: rcc@40023800 { #clock-cells = <2>; - compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; + compatible = "st,stm32f746-rcc", "st,stm32-rcc"; reg = <0x40023800 0x400>; - clocks = <&clk_hse>; + clocks = <&clk_hse>, <&clk_i2s_ckin>; + st,syscfg = <&pwrcfg>; + assigned-clocks = <&rcc 1 CLK_HSE_RTC>; + assigned-clock-rates = <1000000>; }; }; }; diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi new file mode 100644 index 000000000000..fcc1e0640233 --- /dev/null +++ b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi @@ -0,0 +1,156 @@ +/* + * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/pinctrl/stm32h7-pinfunc.h> + +/ { + soc { + pin-controller { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32h743-pinctrl"; + ranges = <0 0x58020000 0x3000>; + pins-are-numbered; + + gpioa: gpio@58020000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x0 0x400>; + clocks = <&timer_clk>; + st,bank-name = "GPIOA"; + }; + + gpiob: gpio@58020400 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x400 0x400>; + clocks = <&timer_clk>; + st,bank-name = "GPIOB"; + }; + + gpioc: gpio@58020800 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x800 0x400>; + clocks = <&timer_clk>; + st,bank-name = "GPIOC"; + }; + + gpiod: gpio@58020c00 { + gpio-controller; + #gpio-cells = <2>; + reg = <0xc00 0x400>; + clocks = <&timer_clk>; + st,bank-name = "GPIOD"; + }; + + gpioe: gpio@58021000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1000 0x400>; + clocks = <&timer_clk>; + st,bank-name = "GPIOE"; + }; + + gpiof: gpio@58021400 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1400 0x400>; + clocks = <&timer_clk>; + st,bank-name = "GPIOF"; + }; + + gpiog: gpio@58021800 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1800 0x400>; + clocks = <&timer_clk>; + st,bank-name = "GPIOG"; + }; + + gpioh: gpio@58021c00 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1c00 0x400>; + clocks = <&timer_clk>; + st,bank-name = "GPIOH"; + }; + + gpioi: gpio@58022000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x2000 0x400>; + clocks = <&timer_clk>; + st,bank-name = "GPIOI"; + }; + + gpioj: gpio@58022400 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x2400 0x400>; + clocks = <&timer_clk>; + st,bank-name = "GPIOJ"; + }; + + gpiok: gpio@58022800 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x2800 0x400>; + clocks = <&timer_clk>; + st,bank-name = "GPIOK"; + }; + + usart1_pins: usart1@0 { + pins1 { + pinmux = <STM32H7_PB14_FUNC_USART1_TX>; + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32H7_PB15_FUNC_USART1_RX>; + bias-disable; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi new file mode 100644 index 000000000000..46856298ee16 --- /dev/null +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -0,0 +1,83 @@ +/* + * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "skeleton.dtsi" +#include "armv7-m.dtsi" + +/ { + clocks { + clk_hse: clk-hse { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + timer_clk: timer-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <125000000>; + }; + }; + + soc { + usart1: serial@40011000 { + compatible = "st,stm32f7-usart", "st,stm32f7-uart"; + reg = <0x40011000 0x400>; + interrupts = <37>; + status = "disabled"; + clocks = <&timer_clk>; + + }; + + timer5: timer@40000c00 { + compatible = "st,stm32-timer"; + reg = <0x40000c00 0x400>; + interrupts = <50>; + clocks = <&timer_clk>; + }; + }; +}; + +&systick { + clock-frequency = <250000000>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts new file mode 100644 index 000000000000..c6effbb36e4a --- /dev/null +++ b/arch/arm/boot/dts/stm32h743i-eval.dts @@ -0,0 +1,74 @@ +/* + * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "stm32h743.dtsi" +#include "stm32h743-pinctrl.dtsi" + +/ { + model = "STMicroelectronics STM32H743i-EVAL board"; + compatible = "st,stm32h743i-eval", "st,stm32h743"; + + chosen { + bootargs = "root=/dev/ram"; + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0xd0000000 0x2000000>; + }; + + aliases { + serial0 = &usart1; + }; +}; + +&clk_hse { + clock-frequency = <125000000>; +}; + +&usart1 { + pinctrl-0 = <&usart1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index f3fc27412a67..f2a01fe2bebc 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -47,7 +47,6 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Mele A1000"; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 04e040e6233d..d844938e2aa7 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -46,7 +46,6 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Cubietech Cubieboard"; diff --git a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts index 8317fbfeec4a..aad3bec1cb39 100644 --- a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts +++ b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts @@ -46,7 +46,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> #include <dt-bindings/pwm/pwm.h> / { diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index a48b46474417..a1a7282199d5 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -47,7 +47,6 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Miniand Hackberry"; diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/sun4i-a10-inet1.dts index f3092703a1a6..b8923b92cb36 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet1.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet1.dts @@ -46,7 +46,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> #include <dt-bindings/pwm/pwm.h> / { diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts index 4ef2a60a8cd4..4a27eb9102cd 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts @@ -46,7 +46,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "iNet-9F Rev 03"; diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts index fc4d4d49e2e2..308dc1513041 100644 --- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts +++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts @@ -47,7 +47,6 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Jesurun Q5"; diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts index a2885039d5f1..98a5f7258dca 100644 --- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts @@ -46,7 +46,6 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "HAOYU Electronics Marsboard A10"; diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index af42ebb3a97b..484c57493bd2 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -47,7 +47,6 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "PineRiver Mini X-Plus"; diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts index 9c1afd4277d7..2b75745cd246 100644 --- a/arch/arm/boot/dts/sun4i-a10-mk802.dts +++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts @@ -44,7 +44,6 @@ #include "sun4i-a10.dtsi" #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "MK802"; diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index 214a5accfe93..3a2522a9419d 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -45,7 +45,6 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Olimex A10-OLinuXino-LIME"; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index b0365d63ba70..83596fd2ccfc 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -47,7 +47,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "LinkSprite pcDuino"; diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts index bfa6bbdaab27..a68c7cc53b94 100644 --- a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts +++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts @@ -46,7 +46,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> #include <dt-bindings/pwm/pwm.h> / { diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index ba20b48c0702..b63668ece151 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -47,7 +47,6 @@ #include <dt-bindings/clock/sun4i-a10-pll2.h> #include <dt-bindings/dma/sun4i-a10.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { interrupt-parent = <&intc>; @@ -974,6 +973,11 @@ #interrupt-cells = <3>; #gpio-cells = <3>; + can0_pins_a: can0@0 { + pins = "PH20", "PH21"; + function = "can"; + }; + emac_pins_a: emac0@0 { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", @@ -1283,6 +1287,22 @@ status = "disabled"; }; + ps20: ps2@01c2a000 { + compatible = "allwinner,sun4i-a10-ps2"; + reg = <0x01c2a000 0x400>; + interrupts = <62>; + clocks = <&apb1_gates 6>; + status = "disabled"; + }; + + ps21: ps2@01c2a400 { + compatible = "allwinner,sun4i-a10-ps2"; + reg = <0x01c2a400 0x400>; + interrupts = <63>; + clocks = <&apb1_gates 7>; + status = "disabled"; + }; + i2c0: i2c@01c2ac00 { compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; @@ -1313,19 +1333,11 @@ #size-cells = <0>; }; - ps20: ps2@01c2a000 { - compatible = "allwinner,sun4i-a10-ps2"; - reg = <0x01c2a000 0x400>; - interrupts = <62>; - clocks = <&apb1_gates 6>; - status = "disabled"; - }; - - ps21: ps2@01c2a400 { - compatible = "allwinner,sun4i-a10-ps2"; - reg = <0x01c2a400 0x400>; - interrupts = <63>; - clocks = <&apb1_gates 7>; + can0: can@01c2bc00 { + compatible = "allwinner,sun4i-a10-can"; + reg = <0x01c2bc00 0x400>; + interrupts = <26>; + clocks = <&apb1_gates 4>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts index a539b72ce093..c6f742a7e69f 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts @@ -44,7 +44,6 @@ #include "sun5i-a10s.dtsi" #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Auxtek t003 A10s hdmi tv-stick"; diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts index e1b5e8a446fe..a27c3fa58736 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts @@ -44,7 +44,6 @@ #include "sun5i-a10s.dtsi" #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Auxtek t004 A10s hdmi tv-stick"; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index d8245c6314a7..894f874a5beb 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -48,7 +48,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Olimex A10s-Olinuxino Micro"; @@ -83,7 +82,7 @@ &emac { pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; + pinctrl-0 = <&emac_pins_b>; phy = <&phy1>; status = "okay"; }; @@ -257,7 +256,7 @@ &uart2 { pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins_a>; + pinctrl-0 = <&uart2_pins_b>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts index 51371f9b1cf0..262b3669f04d 100644 --- a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts +++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts @@ -45,7 +45,6 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "R7 A10s hdmi tv-stick"; diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts index 2b8adda0deda..ea3e5655a61b 100644 --- a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts +++ b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts @@ -46,7 +46,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "A10s-Wobo i5"; @@ -95,7 +94,7 @@ &emac { pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_b>; + pinctrl-0 = <&emac_pins_a>; phy = <&phy1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 24b0f5f556f8..1e38ff80366c 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -47,7 +47,6 @@ #include "sun5i.dtsi" #include <dt-bindings/dma/sun4i-a10.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { interrupt-parent = <&intc>; @@ -61,7 +60,7 @@ #size-cells = <1>; ranges; - framebuffer@0 { + framebuffer@2 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; @@ -70,45 +69,9 @@ <&ccu CLK_DE_BE>, <&ccu CLK_HDMI>; status = "disabled"; }; - - framebuffer@1 { - compatible = "allwinner,simple-framebuffer", - "simple-framebuffer"; - allwinner,pipeline = "de_be0-lcd0"; - clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, - <&ccu CLK_TCON_CH0>, <&ccu CLK_DRAM_DE_BE>; - status = "disabled"; - }; - - framebuffer@2 { - compatible = "allwinner,simple-framebuffer", - "simple-framebuffer"; - allwinner,pipeline = "de_be0-lcd0-tve0"; - clocks = <&ccu CLK_AHB_TVE>, <&ccu CLK_AHB_LCD>, - <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, - <&ccu CLK_TCON_CH1>, <&ccu CLK_DRAM_DE_BE>; - status = "disabled"; - }; }; soc@01c00000 { - emac: ethernet@01c0b000 { - compatible = "allwinner,sun4i-a10-emac"; - reg = <0x01c0b000 0x1000>; - interrupts = <55>; - clocks = <&ccu CLK_AHB_EMAC>; - allwinner,sram = <&emac_sram 1>; - status = "disabled"; - }; - - mdio: mdio@01c0b080 { - compatible = "allwinner,sun4i-a10-mdio"; - reg = <0x01c0b080 0x14>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - pwm: pwm@01c20e00 { compatible = "allwinner,sun5i-a10s-pwm"; reg = <0x01c20e00 0xc>; @@ -116,26 +79,6 @@ #pwm-cells = <3>; status = "disabled"; }; - - uart0: serial@01c28000 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28000 0x400>; - interrupts = <1>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_APB1_UART0>; - status = "disabled"; - }; - - uart2: serial@01c28800 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28800 0x400>; - interrupts = <3>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_APB1_UART2>; - status = "disabled"; - }; }; }; @@ -151,12 +94,12 @@ function = "uart0"; }; - uart2_pins_a: uart2@0 { + uart2_pins_b: uart2@1 { pins = "PC18", "PC19"; function = "uart2"; }; - emac_pins_a: emac0@0 { + emac_pins_b: emac0@1 { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", @@ -165,15 +108,6 @@ function = "emac"; }; - emac_pins_b: emac0@1 { - pins = "PD6", "PD7", "PD10", - "PD11", "PD12", "PD13", "PD14", - "PD15", "PD18", "PD19", "PD20", - "PD21", "PD22", "PD23", "PD24", - "PD25", "PD26", "PD27"; - function = "emac"; - }; - mmc1_pins_a: mmc1@0 { pins = "PG3", "PG4", "PG5", "PG6", "PG7", "PG8"; @@ -193,9 +127,4 @@ }; &sram_a { - emac_sram: sram-section@8000 { - compatible = "allwinner,sun4i-a10-sram-a3-a4"; - reg = <0x8000 0x4000>; - status = "disabled"; - }; }; diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts index 42435454acef..34411d27aadf 100644 --- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts +++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts @@ -46,7 +46,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> #include <dt-bindings/pwm/pwm.h> / { diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts index 5879a75cf97a..2489c16f7efa 100644 --- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts +++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts @@ -46,7 +46,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "HSG H702"; diff --git a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts index 566cda91a66b..bc883893f4a4 100644 --- a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts +++ b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts @@ -50,7 +50,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Lichee Pi One"; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts index 60e393e28783..3a831eaf1dfc 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts @@ -46,7 +46,6 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Olimex A13-Olinuxino Micro"; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 940d47e88056..95f591bb8ced 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -48,7 +48,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Olimex A13-Olinuxino"; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index fb2ddb9a04c9..6436bad94404 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -46,27 +46,11 @@ #include "sun5i.dtsi" -#include <dt-bindings/pinctrl/sun4i-a10.h> #include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&intc>; - chosen { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - framebuffer@0 { - compatible = "allwinner,simple-framebuffer", - "simple-framebuffer"; - allwinner,pipeline = "de_be0-lcd0"; - clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, - <&ccu CLK_TCON_CH0>, <&ccu CLK_DRAM_DE_BE>; - status = "disabled"; - }; - }; - thermal-zones { cpu_thermal { /* milliseconds */ @@ -105,44 +89,6 @@ }; soc@01c00000 { - tcon0: lcd-controller@01c0c000 { - compatible = "allwinner,sun5i-a13-tcon"; - reg = <0x01c0c000 0x1000>; - interrupts = <44>; - resets = <&ccu RST_LCD>; - reset-names = "lcd"; - clocks = <&ccu CLK_AHB_LCD>, - <&ccu CLK_TCON_CH0>, - <&ccu CLK_TCON_CH1>; - clock-names = "ahb", - "tcon-ch0", - "tcon-ch1"; - clock-output-names = "tcon-pixel-clock"; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - tcon0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - tcon0_in_be0: endpoint@0 { - reg = <0>; - remote-endpoint = <&be0_out_tcon0>; - }; - }; - - tcon0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - }; - }; - pwm: pwm@01c20e00 { compatible = "allwinner,sun5i-a13-pwm"; reg = <0x01c20e00 0xc>; @@ -151,74 +97,6 @@ status = "disabled"; }; - fe0: display-frontend@01e00000 { - compatible = "allwinner,sun5i-a13-display-frontend"; - reg = <0x01e00000 0x20000>; - interrupts = <47>; - clocks = <&ccu CLK_DE_FE>, <&ccu CLK_DE_FE>, - <&ccu CLK_DRAM_DE_FE>; - clock-names = "ahb", "mod", - "ram"; - resets = <&ccu RST_DE_FE>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - fe0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - fe0_out_be0: endpoint@0 { - reg = <0>; - remote-endpoint = <&be0_in_fe0>; - }; - }; - }; - }; - - be0: display-backend@01e60000 { - compatible = "allwinner,sun5i-a13-display-backend"; - reg = <0x01e60000 0x10000>; - clocks = <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, - <&ccu CLK_DRAM_DE_BE>; - clock-names = "ahb", "mod", - "ram"; - resets = <&ccu RST_DE_BE>; - status = "disabled"; - - assigned-clocks = <&ccu CLK_DE_BE>; - assigned-clock-rates = <300000000>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - be0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - be0_in_fe0: endpoint@0 { - reg = <0>; - remote-endpoint = <&fe0_out_be0>; - }; - }; - - be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - be0_out_tcon0: endpoint@0 { - reg = <0>; - remote-endpoint = <&tcon0_in_be0>; - }; - }; - }; - }; }; }; @@ -244,22 +122,4 @@ &pio { compatible = "allwinner,sun5i-a13-pinctrl"; - - lcd_rgb666_pins: lcd_rgb666@0 { - pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", - "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", - "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", - "PD24", "PD25", "PD26", "PD27"; - function = "lcd0"; - }; - - uart1_pins_a: uart1@0 { - pins = "PE10", "PE11"; - function = "uart1"; - }; - - uart1_pins_b: uart1@1 { - pins = "PG3", "PG4"; - function = "uart1"; - }; }; diff --git a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts index 0cf0813d363a..c55b11a4d3c7 100644 --- a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts +++ b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts @@ -171,7 +171,7 @@ &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins>; + pinctrl-0 = <&pwm0_pins>, <&pwm1_pins>; status = "disabled"; }; @@ -220,7 +220,7 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_a>, <&uart1_cts_rts_pins_a>; + pinctrl-0 = <&uart1_pins_b>, <&uart1_cts_rts_pins_a>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-gr8-evb.dts b/arch/arm/boot/dts/sun5i-gr8-evb.dts index 1a845af4d4db..558c16a30543 100644 --- a/arch/arm/boot/dts/sun5i-gr8-evb.dts +++ b/arch/arm/boot/dts/sun5i-gr8-evb.dts @@ -281,7 +281,7 @@ &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>; + pinctrl-0 = <&pwm0_pins>; status = "okay"; }; @@ -332,7 +332,7 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_a>, <&uart1_cts_rts_pins_a>; + pinctrl-0 = <&uart1_pins_b>, <&uart1_cts_rts_pins_a>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-gr8.dtsi b/arch/arm/boot/dts/sun5i-gr8.dtsi index cb9b2aaf7297..3eb56cad0cea 100644 --- a/arch/arm/boot/dts/sun5i-gr8.dtsi +++ b/arch/arm/boot/dts/sun5i-gr8.dtsi @@ -42,429 +42,19 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include "sun5i.dtsi" + #include <dt-bindings/clock/sun5i-ccu.h> #include <dt-bindings/dma/sun4i-a10.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> #include <dt-bindings/reset/sun5i-ccu.h> / { - interrupt-parent = <&intc>; - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a8"; - reg = <0x0>; - clocks = <&ccu CLK_CPU>; - }; - }; - - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - osc24M: clk@01c20050 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "osc24M"; - }; - - osc32k: clk@0 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - clock-output-names = "osc32k"; - }; - }; - display-engine { compatible = "allwinner,sun5i-a13-display-engine"; allwinner,pipelines = <&fe0>; }; soc@01c00000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - sram-controller@01c00000 { - compatible = "allwinner,sun4i-a10-sram-controller"; - reg = <0x01c00000 0x30>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - sram_a: sram@00000000 { - compatible = "mmio-sram"; - reg = <0x00000000 0xc000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x00000000 0xc000>; - }; - - sram_d: sram@00010000 { - compatible = "mmio-sram"; - reg = <0x00010000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x00010000 0x1000>; - - otg_sram: sram-section@0000 { - compatible = "allwinner,sun4i-a10-sram-d"; - reg = <0x0000 0x1000>; - status = "disabled"; - }; - }; - }; - - dma: dma-controller@01c02000 { - compatible = "allwinner,sun4i-a10-dma"; - reg = <0x01c02000 0x1000>; - interrupts = <27>; - clocks = <&ccu CLK_AHB_DMA>; - #dma-cells = <2>; - }; - - nfc: nand@01c03000 { - compatible = "allwinner,sun4i-a10-nand"; - reg = <0x01c03000 0x1000>; - interrupts = <37>; - clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 3>; - dma-names = "rxtx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - spi0: spi@01c05000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c05000 0x1000>; - interrupts = <10>; - clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 27>, - <&dma SUN4I_DMA_DEDICATED 26>; - dma-names = "rx", "tx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - spi1: spi@01c06000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c06000 0x1000>; - interrupts = <11>; - clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 9>, - <&dma SUN4I_DMA_DEDICATED 8>; - dma-names = "rx", "tx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - tve0: tv-encoder@01c0a000 { - compatible = "allwinner,sun4i-a10-tv-encoder"; - reg = <0x01c0a000 0x1000>; - clocks = <&ccu CLK_AHB_TVE>; - resets = <&ccu RST_TVE>; - status = "disabled"; - - port { - #address-cells = <1>; - #size-cells = <0>; - - tve0_in_tcon0: endpoint@0 { - reg = <0>; - remote-endpoint = <&tcon0_out_tve0>; - }; - }; - }; - - tcon0: lcd-controller@01c0c000 { - compatible = "allwinner,sun5i-a13-tcon"; - reg = <0x01c0c000 0x1000>; - interrupts = <44>; - resets = <&ccu RST_LCD>; - reset-names = "lcd"; - clocks = <&ccu CLK_AHB_LCD>, - <&ccu CLK_TCON_CH0>, - <&ccu CLK_TCON_CH1>; - clock-names = "ahb", - "tcon-ch0", - "tcon-ch1"; - clock-output-names = "tcon-pixel-clock"; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - tcon0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - tcon0_in_be0: endpoint@0 { - reg = <0>; - remote-endpoint = <&be0_out_tcon0>; - }; - }; - - tcon0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - tcon0_out_tve0: endpoint@1 { - reg = <1>; - remote-endpoint = <&tve0_in_tcon0>; - }; - }; - }; - }; - - mmc0: mmc@01c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c0f000 0x1000>; - clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>; - clock-names = "ahb", "mmc"; - interrupts = <32>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - mmc1: mmc@01c10000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c10000 0x1000>; - clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>; - clock-names = "ahb", "mmc"; - interrupts = <33>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - mmc2: mmc@01c11000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c11000 0x1000>; - clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>; - clock-names = "ahb", "mmc"; - interrupts = <34>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - usb_otg: usb@01c13000 { - compatible = "allwinner,sun4i-a10-musb"; - reg = <0x01c13000 0x0400>; - clocks = <&ccu CLK_AHB_OTG>; - interrupts = <38>; - interrupt-names = "mc"; - phys = <&usbphy 0>; - phy-names = "usb"; - extcon = <&usbphy 0>; - allwinner,sram = <&otg_sram 1>; - status = "disabled"; - - dr_mode = "otg"; - }; - - usbphy: phy@01c13400 { - #phy-cells = <1>; - compatible = "allwinner,sun5i-a13-usb-phy"; - reg = <0x01c13400 0x10 0x01c14800 0x4>; - reg-names = "phy_ctrl", "pmu1"; - clocks = <&ccu CLK_USB_PHY0>; - clock-names = "usb_phy"; - resets = <&ccu RST_USB_PHY0>, <&ccu RST_USB_PHY1>; - reset-names = "usb0_reset", "usb1_reset"; - status = "disabled"; - }; - - ehci0: usb@01c14000 { - compatible = "allwinner,sun5i-a13-ehci", "generic-ehci"; - reg = <0x01c14000 0x100>; - interrupts = <39>; - clocks = <&ccu CLK_AHB_EHCI>; - phys = <&usbphy 1>; - phy-names = "usb"; - status = "disabled"; - }; - - ohci0: usb@01c14400 { - compatible = "allwinner,sun5i-a13-ohci", "generic-ohci"; - reg = <0x01c14400 0x100>; - interrupts = <40>; - clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>; - phys = <&usbphy 1>; - phy-names = "usb"; - status = "disabled"; - }; - - spi2: spi@01c17000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c17000 0x1000>; - interrupts = <12>; - clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 29>, - <&dma SUN4I_DMA_DEDICATED 28>; - dma-names = "rx", "tx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - ccu: clock@01c20000 { - compatible = "nextthing,gr8-ccu"; - reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&osc32k>; - clock-names = "hosc", "losc"; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - intc: interrupt-controller@01c20400 { - compatible = "allwinner,sun4i-a10-ic"; - reg = <0x01c20400 0x400>; - interrupt-controller; - #interrupt-cells = <1>; - }; - - pio: pinctrl@01c20800 { - compatible = "nextthing,gr8-pinctrl"; - reg = <0x01c20800 0x400>; - interrupts = <28>; - clocks = <&ccu CLK_APB0_PIO>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <3>; - #gpio-cells = <3>; - - i2c0_pins_a: i2c0@0 { - pins = "PB0", "PB1"; - function = "i2c0"; - }; - - i2c1_pins_a: i2c1@0 { - pins = "PB15", "PB16"; - function = "i2c1"; - }; - - i2c2_pins_a: i2c2@0 { - pins = "PB17", "PB18"; - function = "i2c2"; - }; - - i2s0_data_pins_a: i2s0-data@0 { - pins = "PB6", "PB7", "PB8", "PB9"; - function = "i2s0"; - }; - - i2s0_mclk_pins_a: i2s0-mclk@0 { - pins = "PB5"; - function = "i2s0"; - }; - - ir0_rx_pins_a: ir0@0 { - pins = "PB4"; - function = "ir0"; - }; - - lcd_rgb666_pins: lcd-rgb666@0 { - pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", - "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", - "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", - "PD24", "PD25", "PD26", "PD27"; - function = "lcd0"; - }; - - mmc0_pins_a: mmc0@0 { - pins = "PF0", "PF1", "PF2", "PF3", - "PF4", "PF5"; - function = "mmc0"; - drive-strength = <30>; - }; - - nand_pins_a: nand-base0@0 { - pins = "PC0", "PC1", "PC2", - "PC5", "PC8", "PC9", "PC10", - "PC11", "PC12", "PC13", "PC14", - "PC15"; - function = "nand0"; - }; - - nand_cs0_pins_a: nand-cs@0 { - pins = "PC4"; - function = "nand0"; - }; - - nand_rb0_pins_a: nand-rb@0 { - pins = "PC6"; - function = "nand0"; - }; - - pwm0_pins_a: pwm0@0 { - pins = "PB2"; - function = "pwm0"; - }; - - pwm1_pins: pwm1 { - pins = "PG13"; - function = "pwm1"; - }; - - spdif_tx_pins_a: spdif@0 { - pins = "PB10"; - function = "spdif"; - bias-pull-up; - }; - - uart1_pins_a: uart1@1 { - pins = "PG3", "PG4"; - function = "uart1"; - }; - - uart1_cts_rts_pins_a: uart1-cts-rts@0 { - pins = "PG5", "PG6"; - function = "uart1"; - }; - - uart2_pins_a: uart2@1 { - pins = "PD2", "PD3"; - function = "uart2"; - }; - - uart2_cts_rts_pins_a: uart2-cts-rts@0 { - pins = "PD4", "PD5"; - function = "uart2"; - }; - - uart3_pins_a: uart3@1 { - pins = "PG9", "PG10"; - function = "uart3"; - }; - - uart3_cts_rts_pins_a: uart3-cts-rts@0 { - pins = "PG11", "PG12"; - function = "uart3"; - }; - }; - pwm: pwm@01c20e00 { compatible = "allwinner,sun5i-a10s-pwm"; reg = <0x01c20e00 0xc>; @@ -473,18 +63,6 @@ status = "disabled"; }; - timer@01c20c00 { - compatible = "allwinner,sun4i-a10-timer"; - reg = <0x01c20c00 0x90>; - interrupts = <22>; - clocks = <&ccu CLK_HOSC>; - }; - - wdt: watchdog@01c20c90 { - compatible = "allwinner,sun4i-a10-wdt"; - reg = <0x01c20c90 0x10>; - }; - spdif: spdif@01c21000 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-spdif"; @@ -498,15 +76,6 @@ status = "disabled"; }; - ir0: ir@01c21800 { - compatible = "allwinner,sun4i-a10-ir"; - clocks = <&ccu CLK_APB0_IR>, <&ccu CLK_IR>; - clock-names = "apb", "ir"; - interrupts = <5>; - reg = <0x01c21800 0x40>; - status = "disabled"; - }; - i2s0: i2s@01c22400 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-i2s"; @@ -519,168 +88,39 @@ dma-names = "rx", "tx"; status = "disabled"; }; + }; +}; - lradc: lradc@01c22800 { - compatible = "allwinner,sun4i-a10-lradc-keys"; - reg = <0x01c22800 0x100>; - interrupts = <31>; - status = "disabled"; - }; - - codec: codec@01c22c00 { - #sound-dai-cells = <0>; - compatible = "allwinner,sun4i-a10-codec"; - reg = <0x01c22c00 0x40>; - interrupts = <30>; - clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>; - clock-names = "apb", "codec"; - dmas = <&dma SUN4I_DMA_NORMAL 19>, - <&dma SUN4I_DMA_NORMAL 19>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - rtp: rtp@01c25000 { - compatible = "allwinner,sun5i-a13-ts"; - reg = <0x01c25000 0x100>; - interrupts = <29>; - #thermal-sensor-cells = <0>; - }; - - uart1: serial@01c28400 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28400 0x400>; - interrupts = <2>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_APB1_UART1>; - status = "disabled"; - }; - - uart2: serial@01c28800 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28800 0x400>; - interrupts = <3>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_APB1_UART2>; - status = "disabled"; - }; - - uart3: serial@01c28c00 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28c00 0x400>; - interrupts = <4>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_APB1_UART3>; - status = "disabled"; - }; - - i2c0: i2c@01c2ac00 { - compatible = "allwinner,sun4i-a10-i2c"; - reg = <0x01c2ac00 0x400>; - interrupts = <7>; - clocks = <&ccu CLK_APB1_I2C0>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c1: i2c@01c2b000 { - compatible = "allwinner,sun4i-a10-i2c"; - reg = <0x01c2b000 0x400>; - interrupts = <8>; - clocks = <&ccu CLK_APB1_I2C1>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c2: i2c@01c2b400 { - compatible = "allwinner,sun4i-a10-i2c"; - reg = <0x01c2b400 0x400>; - interrupts = <9>; - clocks = <&ccu CLK_APB1_I2C2>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - timer@01c60000 { - compatible = "allwinner,sun5i-a13-hstimer"; - reg = <0x01c60000 0x1000>; - interrupts = <82>, <83>; - clocks = <&ccu CLK_AHB_HSTIMER>; - }; - - fe0: display-frontend@01e00000 { - compatible = "allwinner,sun5i-a13-display-frontend"; - reg = <0x01e00000 0x20000>; - interrupts = <47>; - clocks = <&ccu CLK_AHB_DE_FE>, <&ccu CLK_DE_FE>, - <&ccu CLK_DRAM_DE_FE>; - clock-names = "ahb", "mod", - "ram"; - resets = <&ccu RST_DE_FE>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - fe0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - fe0_out_be0: endpoint@0 { - reg = <0>; - remote-endpoint = <&be0_in_fe0>; - }; - }; - }; - }; - - be0: display-backend@01e60000 { - compatible = "allwinner,sun5i-a13-display-backend"; - reg = <0x01e60000 0x10000>; - clocks = <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, - <&ccu CLK_DRAM_DE_BE>; - clock-names = "ahb", "mod", - "ram"; - resets = <&ccu RST_DE_BE>; - status = "disabled"; +&ccu { + compatible = "nextthing,gr8-ccu"; +}; - assigned-clocks = <&ccu CLK_DE_BE>; - assigned-clock-rates = <300000000>; +&pio { + compatible = "nextthing,gr8-pinctrl"; - ports { - #address-cells = <1>; - #size-cells = <0>; + i2s0_data_pins_a: i2s0-data@0 { + pins = "PB6", "PB7", "PB8", "PB9"; + function = "i2s0"; + }; - be0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; + i2s0_mclk_pins_a: i2s0-mclk@0 { + pins = "PB5"; + function = "i2s0"; + }; - be0_in_fe0: endpoint@0 { - reg = <0>; - remote-endpoint = <&fe0_out_be0>; - }; - }; + pwm1_pins: pwm1 { + pins = "PG13"; + function = "pwm1"; + }; - be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; + spdif_tx_pins_a: spdif@0 { + pins = "PB10"; + function = "spdif"; + bias-pull-up; + }; - be0_out_tcon0: endpoint@0 { - reg = <0>; - remote-endpoint = <&tcon0_in_be0>; - }; - }; - }; - }; + uart1_cts_rts_pins_a: uart1-cts-rts@0 { + pins = "PG5", "PG6"; + function = "uart1"; }; }; diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts index e86fa46fdd45..d0785602663b 100644 --- a/arch/arm/boot/dts/sun5i-r8-chip.dts +++ b/arch/arm/boot/dts/sun5i-r8-chip.dts @@ -128,6 +128,10 @@ #include "axp209.dtsi" +&ac_power_supply { + status = "okay"; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins_a>; @@ -281,7 +285,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&uart3_pins_a>, - <&uart3_pins_cts_rts_a>; + <&uart3_cts_rts_pins_a>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-r8.dtsi b/arch/arm/boot/dts/sun5i-r8.dtsi index 4c1141396c99..de35dbcd1191 100644 --- a/arch/arm/boot/dts/sun5i-r8.dtsi +++ b/arch/arm/boot/dts/sun5i-r8.dtsi @@ -45,43 +45,3 @@ #include "sun5i-a13.dtsi" -/ { - chosen { - framebuffer@1 { - compatible = "allwinner,simple-framebuffer", - "simple-framebuffer"; - allwinner,pipeline = "de_be0-lcd0-tve0"; - clocks = <&ccu CLK_AHB_TVE>, <&ccu CLK_AHB_LCD>, - <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, - <&ccu CLK_TCON_CH1>, <&ccu CLK_DRAM_DE_BE>; - status = "disabled"; - }; - }; - - soc@01c00000 { - tve0: tv-encoder@01c0a000 { - compatible = "allwinner,sun4i-a10-tv-encoder"; - reg = <0x01c0a000 0x1000>; - clocks = <&ccu CLK_AHB_TVE>; - resets = <&ccu RST_TVE>; - status = "disabled"; - - port { - #address-cells = <1>; - #size-cells = <0>; - - tve0_in_tcon0: endpoint@0 { - reg = <0>; - remote-endpoint = <&tcon0_out_tve0>; - }; - }; - }; - }; -}; - -&tcon0_out { - tcon0_out_tve0: endpoint@1 { - reg = <1>; - remote-endpoint = <&tve0_in_tcon0>; - }; -}; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index a9574a6cd95c..5175f9cc9bed 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -46,7 +46,6 @@ #include <dt-bindings/clock/sun5i-ccu.h> #include <dt-bindings/dma/sun4i-a10.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> #include <dt-bindings/reset/sun5i-ccu.h> / { @@ -64,6 +63,31 @@ }; }; + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer@0 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0"; + clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_TCON_CH0>, <&ccu CLK_DRAM_DE_BE>; + status = "disabled"; + }; + + framebuffer@1 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0-tve0"; + clocks = <&ccu CLK_AHB_TVE>, <&ccu CLK_AHB_LCD>, + <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_TCON_CH1>, <&ccu CLK_DRAM_DE_BE>; + status = "disabled"; + }; + }; + clocks { #address-cells = <1>; #size-cells = <1>; @@ -105,6 +129,12 @@ ranges = <0 0x00000000 0xc000>; }; + emac_sram: sram-section@8000 { + compatible = "allwinner,sun4i-a10-sram-a3-a4"; + reg = <0x8000 0x4000>; + status = "disabled"; + }; + sram_d: sram@00010000 { compatible = "mmio-sram"; reg = <0x00010000 0x1000>; @@ -128,6 +158,19 @@ #dma-cells = <2>; }; + nfc: nand@01c03000 { + compatible = "allwinner,sun4i-a10-nand"; + reg = <0x01c03000 0x1000>; + interrupts = <37>; + clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>; + clock-names = "ahb", "mod"; + dmas = <&dma SUN4I_DMA_DEDICATED 3>; + dma-names = "rxtx"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + spi0: spi@01c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; @@ -156,6 +199,84 @@ #size-cells = <0>; }; + tve0: tv-encoder@01c0a000 { + compatible = "allwinner,sun4i-a10-tv-encoder"; + reg = <0x01c0a000 0x1000>; + clocks = <&ccu CLK_AHB_TVE>; + resets = <&ccu RST_TVE>; + status = "disabled"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + tve0_in_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_tve0>; + }; + }; + }; + + emac: ethernet@01c0b000 { + compatible = "allwinner,sun4i-a10-emac"; + reg = <0x01c0b000 0x1000>; + interrupts = <55>; + clocks = <&ccu CLK_AHB_EMAC>; + allwinner,sram = <&emac_sram 1>; + status = "disabled"; + }; + + mdio: mdio@01c0b080 { + compatible = "allwinner,sun4i-a10-mdio"; + reg = <0x01c0b080 0x14>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + tcon0: lcd-controller@01c0c000 { + compatible = "allwinner,sun5i-a13-tcon"; + reg = <0x01c0c000 0x1000>; + interrupts = <44>; + resets = <&ccu RST_LCD>; + reset-names = "lcd"; + clocks = <&ccu CLK_AHB_LCD>, + <&ccu CLK_TCON_CH0>, + <&ccu CLK_TCON_CH1>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1"; + clock-output-names = "tcon-pixel-clock"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon0_out_tve0: endpoint@1 { + reg = <1>; + remote-endpoint = <&tve0_in_tcon0>; + }; + }; + }; + }; + mmc0: mmc@01c0f000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; @@ -273,6 +394,15 @@ #interrupt-cells = <3>; #gpio-cells = <3>; + emac_pins_a: emac0@0 { + pins = "PD6", "PD7", "PD10", + "PD11", "PD12", "PD13", "PD14", + "PD15", "PD18", "PD19", "PD20", + "PD21", "PD22", "PD23", "PD24", + "PD25", "PD26", "PD27"; + function = "emac"; + }; + i2c0_pins_a: i2c0@0 { pins = "PB0", "PB1"; function = "i2c0"; @@ -288,6 +418,11 @@ function = "i2c2"; }; + ir0_rx_pins_a: ir0@0 { + pins = "PB4"; + function = "ir0"; + }; + lcd_rgb565_pins: lcd_rgb565@0 { pins = "PD3", "PD4", "PD5", "PD6", "PD7", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", @@ -296,6 +431,14 @@ function = "lcd0"; }; + lcd_rgb666_pins: lcd_rgb666@0 { + pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", + "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", + "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", + "PD24", "PD25", "PD26", "PD27"; + function = "lcd0"; + }; + mmc0_pins_a: mmc0@0 { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; @@ -321,6 +464,24 @@ bias-pull-up; }; + nand_pins_a: nand-base0@0 { + pins = "PC0", "PC1", "PC2", + "PC5", "PC8", "PC9", "PC10", + "PC11", "PC12", "PC13", "PC14", + "PC15"; + function = "nand0"; + }; + + nand_cs0_pins_a: nand-cs@0 { + pins = "PC4"; + function = "nand0"; + }; + + nand_rb0_pins_a: nand-rb@0 { + pins = "PC6"; + function = "nand0"; + }; + spi2_pins_a: spi2@0 { pins = "PE1", "PE2", "PE3"; function = "spi2"; @@ -331,12 +492,32 @@ function = "spi2"; }; + uart1_pins_a: uart1@0 { + pins = "PE10", "PE11"; + function = "uart1"; + }; + + uart1_pins_b: uart1@1 { + pins = "PG3", "PG4"; + function = "uart1"; + }; + + uart2_pins_a: uart2@0 { + pins = "PD2", "PD3"; + function = "uart2"; + }; + + uart2_cts_rts_pins_a: uart2-cts-rts@0 { + pins = "PD4", "PD5"; + function = "uart2"; + }; + uart3_pins_a: uart3@0 { pins = "PG9", "PG10"; function = "uart3"; }; - uart3_pins_cts_rts_a: uart3-cts-rts@0 { + uart3_cts_rts_pins_a: uart3-cts-rts@0 { pins = "PG11", "PG12"; function = "uart3"; }; @@ -359,6 +540,15 @@ reg = <0x01c20c90 0x10>; }; + ir0: ir@01c21800 { + compatible = "allwinner,sun4i-a10-ir"; + clocks = <&ccu CLK_APB0_IR>, <&ccu CLK_IR>; + clock-names = "apb", "ir"; + interrupts = <5>; + reg = <0x01c21800 0x40>; + status = "disabled"; + }; + lradc: lradc@01c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; @@ -391,6 +581,16 @@ #thermal-sensor-cells = <0>; }; + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = <1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_APB1_UART0>; + status = "disabled"; + }; + uart1: serial@01c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; @@ -401,6 +601,16 @@ status = "disabled"; }; + uart2: serial@01c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <3>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_APB1_UART2>; + status = "disabled"; + }; + uart3: serial@01c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; @@ -447,5 +657,75 @@ interrupts = <82>, <83>; clocks = <&ccu CLK_AHB_HSTIMER>; }; + + fe0: display-frontend@01e00000 { + compatible = "allwinner,sun5i-a13-display-frontend"; + reg = <0x01e00000 0x20000>; + interrupts = <47>; + clocks = <&ccu CLK_DE_FE>, <&ccu CLK_DE_FE>, + <&ccu CLK_DRAM_DE_FE>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_DE_FE>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe0_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe0>; + }; + }; + }; + }; + + be0: display-backend@01e60000 { + compatible = "allwinner,sun5i-a13-display-backend"; + reg = <0x01e60000 0x10000>; + interrupts = <47>; + clocks = <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_DRAM_DE_BE>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_DE_BE>; + status = "disabled"; + + assigned-clocks = <&ccu CLK_DE_BE>; + assigned-clock-rates = <300000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be0_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be0>; + }; + }; + + be0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_be0>; + }; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts index effbdc766938..7f34323a668c 100644 --- a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts +++ b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts @@ -47,7 +47,6 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Allwinner A31 APP4 EVB1 Evaluation Board"; diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index f5ececd45bc0..85eff0307ca4 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -47,7 +47,6 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "WITS A31 Colombus Evaluation Board"; diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index f094eeb6c499..d4f74f476f25 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -47,7 +47,6 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Merrii A31 Hummingbird"; diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts index 2bc57d2dcd80..010a84c7c012 100644 --- a/arch/arm/boot/dts/sun6i-a31-i7.dts +++ b/arch/arm/boot/dts/sun6i-a31-i7.dts @@ -45,7 +45,6 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Mele I7 Quad top set box"; diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index 8af5b667a46d..50605fd4449e 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -45,7 +45,6 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Mele M9 top set box"; diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts index bf0f5831126f..5219556e9f73 100644 --- a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts +++ b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts @@ -45,7 +45,6 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Mele A1000G Quad top set box"; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index a4b96184cac1..9c999d3788f6 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -48,7 +48,6 @@ #include <dt-bindings/thermal/thermal.h> #include <dt-bindings/clock/sun6i-a31-ccu.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> #include <dt-bindings/reset/sun6i-a31-ccu.h> / { diff --git a/arch/arm/boot/dts/sun6i-a31s-cs908.dts b/arch/arm/boot/dts/sun6i-a31s-cs908.dts index 5e8f8c4f2b30..75e578159c3a 100644 --- a/arch/arm/boot/dts/sun6i-a31s-cs908.dts +++ b/arch/arm/boot/dts/sun6i-a31s-cs908.dts @@ -43,8 +43,6 @@ /dts-v1/; #include "sun6i-a31s.dtsi" -#include <dt-bindings/pinctrl/sun4i-a10.h> - / { model = "CSQ CS908 top set box"; compatible = "csq,cs908", "allwinner,sun6i-a31s"; diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts index 2238eda318f6..f3712753fa42 100644 --- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -48,7 +48,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "MSI Primo81 tablet"; diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi index 4ec0c8679b2e..d7325bc4eeb4 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi @@ -45,7 +45,6 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Sinlinx SinA31s Core Board"; diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts index 7ff68bdd7109..b3d98222bd81 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts @@ -63,6 +63,23 @@ gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */ }; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board SPDIF"; + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; }; &codec { @@ -153,6 +170,12 @@ regulator-name = "vcc-gmac-phy"; }; +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&spdif_pins_a>; + status = "okay"; +}; + &usb_otg { dr_mode = "peripheral"; status = "okay"; diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts index 3bd862bf82a9..bdfdce8ca6ba 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -86,6 +86,10 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc3>; +}; + &ehci0 { status = "okay"; }; @@ -151,6 +155,17 @@ status = "okay"; }; +&p2wi { + status = "okay"; + + axp22x: pmic@68 { + compatible = "x-powers,axp221"; + reg = <0x68>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + &pio { gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 { pins = "PA21"; @@ -176,6 +191,48 @@ }; }; +#include "axp22x.dtsi" + +®_dc5ldo { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpus"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vdd-3v0"; +}; + +®_dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-gpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc4 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-sys-dll"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts index 154ebf5082ed..f3edf9ca435c 100644 --- a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts @@ -45,7 +45,6 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Yones TopTech BS1078 v2 Tablet"; diff --git a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi index edaba5f904fd..3cc4046b904a 100644 --- a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi @@ -44,7 +44,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { aliases { diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 91f2e5f9efcb..ed2f35adf542 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -48,7 +48,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "LeMaker Banana Pi"; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 4dc1e10f88c4..a2eab7aa80e0 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -48,7 +48,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Cubietech Cubieboard2"; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index f019aa3fe96d..102903e83bd2 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -48,7 +48,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Cubietech Cubietruck"; @@ -268,6 +267,10 @@ #include "axp209.dtsi" +&ac_power_supply { + status = "okay"; +}; + ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -324,6 +327,10 @@ status = "okay"; }; +&usb_power_supply { + status = "okay"; +}; + &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts index e921ba42f170..99c00b9a1546 100644 --- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts +++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts @@ -48,7 +48,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Merrii A20 Hummingbird"; diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts index 385fd8232ae0..4da49717da21 100644 --- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -46,7 +46,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "I12 / Q5 / QT840A A20 tvbox"; diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts index f5b5325a70e2..28d3abbdc2d4 100644 --- a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts +++ b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts @@ -46,7 +46,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "ICnova-A20 SWAC"; diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts index bbf1c8cbaac6..96bb0bc198ba 100644 --- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts @@ -46,7 +46,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Lamobo R1"; diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts index 0e074bd0e8c9..86f69813683e 100644 --- a/arch/arm/boot/dts/sun7i-a20-m3.dts +++ b/arch/arm/boot/dts/sun7i-a20-m3.dts @@ -48,7 +48,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Mele M3"; diff --git a/arch/arm/boot/dts/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/sun7i-a20-mk808c.dts index 97d7a8b65a03..c4ee30709f3a 100644 --- a/arch/arm/boot/dts/sun7i-a20-mk808c.dts +++ b/arch/arm/boot/dts/sun7i-a20-mk808c.dts @@ -53,7 +53,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "mk808c"; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts index a1450c10b08e..1af5b46862cb 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts @@ -48,7 +48,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Olimex A20-Olimex-SOM-EVB"; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index 1297432c2802..dcd0f7a0dffa 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -49,7 +49,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Olimex A20-OLinuXino-LIME"; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index 71cca5360728..e7d45425758c 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -46,7 +46,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Olimex A20-OLinuXino-LIME2"; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index 223fbd9f7c62..def0ad8395bb 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -49,7 +49,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Olimex A20-Olinuxino Micro"; @@ -85,6 +84,14 @@ status = "okay"; }; +&codec { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &ehci0 { status = "okay"; }; @@ -111,13 +118,9 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - interrupt-controller; - #interrupt-cells = <1>; }; }; @@ -251,6 +254,29 @@ }; }; +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + ®_ahci_5v { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts index a74265749227..7af4c8fc1865 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts @@ -48,7 +48,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Orange Pi Mini"; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts index 3de980c8f8ff..0a8d4a05e8a0 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts @@ -48,7 +48,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Orange Pi"; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index 4599f98a3aee..7c96b53b76bf 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -48,7 +48,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "LinkSprite pcDuino3"; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 2db97fc820dd..93aa55970bd7 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -49,7 +49,6 @@ #include <dt-bindings/clock/sun4i-a10-pll2.h> #include <dt-bindings/dma/sun4i-a10.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { interrupt-parent = <&gic>; @@ -1096,6 +1095,11 @@ #interrupt-cells = <3>; #gpio-cells = <3>; + can0_pins_a: can0@0 { + pins = "PH20", "PH21"; + function = "can"; + }; + clk_out_a_pins_a: clk_out_a@0 { pins = "PI12"; function = "clk_out_a"; @@ -1538,6 +1542,22 @@ status = "disabled"; }; + ps20: ps2@01c2a000 { + compatible = "allwinner,sun4i-a10-ps2"; + reg = <0x01c2a000 0x400>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb1_gates 6>; + status = "disabled"; + }; + + ps21: ps2@01c2a400 { + compatible = "allwinner,sun4i-a10-ps2"; + reg = <0x01c2a400 0x400>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb1_gates 7>; + status = "disabled"; + }; + i2c0: i2c@01c2ac00 { compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; @@ -1582,6 +1602,15 @@ #size-cells = <0>; }; + can0: can@01c2bc00 { + compatible = "allwinner,sun7i-a20-can", + "allwinner,sun4i-a10-can"; + reg = <0x01c2bc00 0x400>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb1_gates 4>; + status = "disabled"; + }; + i2c4: i2c@01c2c000 { compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; @@ -1629,20 +1658,5 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; - ps20: ps2@01c2a000 { - compatible = "allwinner,sun4i-a10-ps2"; - reg = <0x01c2a000 0x400>; - interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb1_gates 6>; - status = "disabled"; - }; - - ps21: ps2@01c2a400 { - compatible = "allwinner,sun4i-a10-ps2"; - reg = <0x01c2a400 0x400>; - interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb1_gates 7>; - status = "disabled"; - }; }; }; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 8a3ed21cb7bc..a8b978d0f35b 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -47,7 +47,6 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/sun8i-a23-a33-ccu.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> #include <dt-bindings/reset/sun8i-a23-a33-ccu.h> / { @@ -493,6 +492,7 @@ clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; clock-names = "bus", "core"; resets = <&ccu RST_BUS_GPU>; + #cooling-cells = <2>; assigned-clocks = <&ccu CLK_GPU>; assigned-clock-rates = <384000000>; diff --git a/arch/arm/boot/dts/sun8i-a23-evb.dts b/arch/arm/boot/dts/sun8i-a23-evb.dts index c21f5b1b255e..87289a60c520 100644 --- a/arch/arm/boot/dts/sun8i-a23-evb.dts +++ b/arch/arm/boot/dts/sun8i-a23-evb.dts @@ -48,7 +48,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Allwinner A23 Evaluation Board"; diff --git a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts index 3ab5c0c09d93..b6958e8f2f01 100644 --- a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts +++ b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts @@ -50,7 +50,6 @@ }; &codec { - pinctrl-0 = <&codec_pa_pin>; allwinner,pa-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ allwinner,audio-routing = "Headphone", "HP", @@ -62,12 +61,3 @@ "Headset Mic", "HBIAS"; status = "okay"; }; - -&pio { - codec_pa_pin: codec_pa_pin@0 { - allwinner,pins = "PH9"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; -}; diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts index 03b89bdd55ba..9b620cc1d5f1 100644 --- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts +++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts @@ -48,7 +48,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Sinlinx SinA33"; @@ -84,6 +83,24 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc3>; +}; + +&cpu0_opp_table { + opp@1104000000 { + opp-hz = /bits/ 64 <1104000000>; + opp-microvolt = <1320000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp@1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1320000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; +}; + &de { status = "okay"; }; @@ -175,6 +192,10 @@ #include "axp223.dtsi" +&ac_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <3000000>; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index 306af6cadf26..013978259372 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -43,24 +43,79 @@ */ #include "sun8i-a23-a33.dtsi" +#include <dt-bindings/thermal/thermal.h> / { cpu0_opp_table: opp_table0 { compatible = "operating-points-v2"; opp-shared; + opp@120000000 { + opp-hz = /bits/ 64 <120000000>; + opp-microvolt = <1040000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp@240000000 { + opp-hz = /bits/ 64 <240000000>; + opp-microvolt = <1040000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp@312000000 { + opp-hz = /bits/ 64 <312000000>; + opp-microvolt = <1040000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp@408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <1040000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp@480000000 { + opp-hz = /bits/ 64 <480000000>; + opp-microvolt = <1040000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp@504000000 { + opp-hz = /bits/ 64 <504000000>; + opp-microvolt = <1040000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1040000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + opp@648000000 { opp-hz = /bits/ 64 <648000000>; opp-microvolt = <1040000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; + opp@720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + opp@816000000 { opp-hz = /bits/ 64 <816000000>; opp-microvolt = <1100000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; + opp@912000000 { + opp-hz = /bits/ 64 <912000000>; + opp-microvolt = <1200000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + opp@1008000000 { opp-hz = /bits/ 64 <1008000000>; opp-microvolt = <1200000>; @@ -73,6 +128,7 @@ clocks = <&ccu CLK_CPUX>; clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; cpu@1 { @@ -100,6 +156,27 @@ status = "disabled"; }; + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&ths>; + }; + + mali_opp_table: gpu-opp-table { + compatible = "operating-points-v2"; + + opp@144000000 { + opp-hz = /bits/ 64 <144000000>; + }; + + opp@240000000 { + opp-hz = /bits/ 64 <240000000>; + }; + + opp@384000000 { + opp-hz = /bits/ 64 <384000000>; + }; + }; + memory { reg = <0x40000000 0x80000000>; }; @@ -196,6 +273,13 @@ status = "disabled"; }; + ths: ths@01c25000 { + compatible = "allwinner,sun8i-a33-ths"; + reg = <0x01c25000 0x100>; + #thermal-sensor-cells = <0>; + #io-channel-cells = <0>; + }; + fe0: display-frontend@01e00000 { compatible = "allwinner,sun8i-a33-display-frontend"; reg = <0x01e00000 0x20000>; @@ -306,12 +390,83 @@ }; }; }; + + thermal-zones { + cpu_thermal { + /* milliseconds */ + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&ths>; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu_alert1>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map2 { + trip = <&gpu_alert0>; + cooling-device = <&mali 1 THERMAL_NO_LIMIT>; + }; + + map3 { + trip = <&gpu_alert1>; + cooling-device = <&mali 2 THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu_alert0: cpu_alert0 { + /* milliCelsius */ + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_alert0: gpu_alert0 { + /* milliCelsius */ + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_alert1: cpu_alert1 { + /* milliCelsius */ + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpu_alert1: gpu_alert1 { + /* milliCelsius */ + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu_crit: cpu_crit { + /* milliCelsius */ + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; }; &ccu { compatible = "allwinner,sun8i-a33-ccu"; }; +&mali { + operating-points-v2 = <&mali_opp_table>; +}; + &pio { compatible = "allwinner,sun8i-a33-pinctrl"; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index a789a7caf217..0ec143773ee9 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -47,8 +47,6 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> - / { interrupt-parent = <&gic>; diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts index b7ca916d871d..9e8b082c134f 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts @@ -49,7 +49,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Xunlong Orange Pi Zero"; @@ -96,6 +95,10 @@ }; }; +&ehci0 { + status = "okay"; +}; + &ehci1 { status = "okay"; }; @@ -132,6 +135,10 @@ bias-pull-up; }; +&ohci0 { + status = "okay"; +}; + &ohci1 { status = "okay"; }; @@ -154,7 +161,17 @@ status = "disabled"; }; +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + &usbphy { - /* USB VBUS is always on */ + /* + * USB Type-A port VBUS is always on. However, MicroUSB VBUS can only + * power up the board; when it's used as OTG port, this VBUS is + * always off even if the board is powered via GPIO pins. + */ status = "okay"; + usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ }; diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts index c0c49dd4d3b2..52acbe111cad 100644 --- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts @@ -46,7 +46,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Banana Pi BPI-M2-Plus"; diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts index 25b225b7dfd6..e7fae65eb5d3 100644 --- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts +++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts @@ -46,7 +46,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Beelink X2"; @@ -138,6 +137,16 @@ }; }; +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + &ohci1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts new file mode 100644 index 000000000000..03ff6f8b93ff --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts @@ -0,0 +1,96 @@ +/* + * Copyright (C) 2017 Jelle van der Waa <jelle@vdwaa.nl> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "FriendlyARM NanoPi NEO Air"; + compatible = "friendlyarm,nanopi-neo-air", "allwinner,sun8i-h3"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + pwr { + label = "nanopi:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + default-state = "on"; + }; + + status { + label = "nanopi:blue:status"; + gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */ + }; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + cd-inverted; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + /* USB VBUS is always on */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi index 2216e68d1838..c6decee41a27 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi +++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi @@ -47,7 +47,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { aliases { diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts index 047e9e1c6093..5b6d14555b7c 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts @@ -46,7 +46,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Xunlong Orange Pi 2"; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts index 22b99b407019..9b47a0def740 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts @@ -46,7 +46,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Xunlong Orange Pi Lite"; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts index 34da853ee037..5fea430e0eb1 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts @@ -46,7 +46,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Xunlong Orange Pi One"; @@ -90,6 +89,10 @@ }; }; +&ehci0 { + status = "okay"; +}; + &ehci1 { status = "okay"; }; @@ -104,6 +107,10 @@ status = "okay"; }; +&ohci0 { + status = "okay"; +}; + &ohci1 { status = "okay"; }; @@ -127,6 +134,11 @@ }; }; +®_usb0_vbus { + gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; @@ -151,7 +163,14 @@ status = "disabled"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { - /* USB VBUS is always on */ + /* USB Type-A port's VBUS is always on */ + usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + usb0_vbus-supply = <®_usb0_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts index d43978d3294e..f148111c326d 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts @@ -46,7 +46,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Xunlong Orange Pi PC"; diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 27780b97c863..b36f9f423c39 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -40,16 +40,9 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" - -#include <dt-bindings/clock/sun8i-h3-ccu.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> -#include <dt-bindings/reset/sun8i-h3-ccu.h> +#include "sunxi-h3-h5.dtsi" / { - interrupt-parent = <&gic>; - cpus { #address-cells = <1>; #size-cells = <0>; @@ -86,563 +79,48 @@ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; +}; - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - osc24M: osc24M_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "osc24M"; - }; - - osc32k: osc32k_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - clock-output-names = "osc32k"; - }; - - apb0: apb0_clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <1>; - clocks = <&osc24M>; - clock-output-names = "apb0"; - }; - - apb0_gates: clk@01f01428 { - compatible = "allwinner,sun8i-h3-apb0-gates-clk", - "allwinner,sun4i-a10-gates-clk"; - reg = <0x01f01428 0x4>; - #clock-cells = <1>; - clocks = <&apb0>; - clock-indices = <0>, <1>; - clock-output-names = "apb0_pio", "apb0_ir"; - }; - - ir_clk: ir_clk@01f01454 { - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01f01454 0x4>; - #clock-cells = <0>; - clocks = <&osc32k>, <&osc24M>; - clock-output-names = "ir"; - }; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - dma: dma-controller@01c02000 { - compatible = "allwinner,sun8i-h3-dma"; - reg = <0x01c02000 0x1000>; - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_DMA>; - resets = <&ccu RST_BUS_DMA>; - #dma-cells = <1>; - }; - - mmc0: mmc@01c0f000 { - compatible = "allwinner,sun7i-a20-mmc"; - reg = <0x01c0f000 0x1000>; - clocks = <&ccu CLK_BUS_MMC0>, - <&ccu CLK_MMC0>, - <&ccu CLK_MMC0_OUTPUT>, - <&ccu CLK_MMC0_SAMPLE>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - resets = <&ccu RST_BUS_MMC0>; - reset-names = "ahb"; - interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - mmc1: mmc@01c10000 { - compatible = "allwinner,sun7i-a20-mmc"; - reg = <0x01c10000 0x1000>; - clocks = <&ccu CLK_BUS_MMC1>, - <&ccu CLK_MMC1>, - <&ccu CLK_MMC1_OUTPUT>, - <&ccu CLK_MMC1_SAMPLE>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - resets = <&ccu RST_BUS_MMC1>; - reset-names = "ahb"; - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - mmc2: mmc@01c11000 { - compatible = "allwinner,sun7i-a20-mmc"; - reg = <0x01c11000 0x1000>; - clocks = <&ccu CLK_BUS_MMC2>, - <&ccu CLK_MMC2>, - <&ccu CLK_MMC2_OUTPUT>, - <&ccu CLK_MMC2_SAMPLE>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - resets = <&ccu RST_BUS_MMC2>; - reset-names = "ahb"; - interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - usbphy: phy@01c19400 { - compatible = "allwinner,sun8i-h3-usb-phy"; - reg = <0x01c19400 0x2c>, - <0x01c1a800 0x4>, - <0x01c1b800 0x4>, - <0x01c1c800 0x4>, - <0x01c1d800 0x4>; - reg-names = "phy_ctrl", - "pmu0", - "pmu1", - "pmu2", - "pmu3"; - clocks = <&ccu CLK_USB_PHY0>, - <&ccu CLK_USB_PHY1>, - <&ccu CLK_USB_PHY2>, - <&ccu CLK_USB_PHY3>; - clock-names = "usb0_phy", - "usb1_phy", - "usb2_phy", - "usb3_phy"; - resets = <&ccu RST_USB_PHY0>, - <&ccu RST_USB_PHY1>, - <&ccu RST_USB_PHY2>, - <&ccu RST_USB_PHY3>; - reset-names = "usb0_reset", - "usb1_reset", - "usb2_reset", - "usb3_reset"; - status = "disabled"; - #phy-cells = <1>; - }; - - ehci1: usb@01c1b000 { - compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; - reg = <0x01c1b000 0x100>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>; - resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; - phys = <&usbphy 1>; - phy-names = "usb"; - status = "disabled"; - }; - - ohci1: usb@01c1b400 { - compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; - reg = <0x01c1b400 0x100>; - interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>, - <&ccu CLK_USB_OHCI1>; - resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; - phys = <&usbphy 1>; - phy-names = "usb"; - status = "disabled"; - }; - - ehci2: usb@01c1c000 { - compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; - reg = <0x01c1c000 0x100>; - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>; - resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; - phys = <&usbphy 2>; - phy-names = "usb"; - status = "disabled"; - }; - - ohci2: usb@01c1c400 { - compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; - reg = <0x01c1c400 0x100>; - interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>, - <&ccu CLK_USB_OHCI2>; - resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; - phys = <&usbphy 2>; - phy-names = "usb"; - status = "disabled"; - }; - - ehci3: usb@01c1d000 { - compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; - reg = <0x01c1d000 0x100>; - interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>; - resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; - phys = <&usbphy 3>; - phy-names = "usb"; - status = "disabled"; - }; - - ohci3: usb@01c1d400 { - compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; - reg = <0x01c1d400 0x100>; - interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>, - <&ccu CLK_USB_OHCI3>; - resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; - phys = <&usbphy 3>; - phy-names = "usb"; - status = "disabled"; - }; - - ccu: clock@01c20000 { - compatible = "allwinner,sun8i-h3-ccu"; - reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&osc32k>; - clock-names = "hosc", "losc"; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - pio: pinctrl@01c20800 { - compatible = "allwinner,sun8i-h3-pinctrl"; - reg = <0x01c20800 0x400>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; - clock-names = "apb", "hosc", "losc"; - gpio-controller; - #gpio-cells = <3>; - interrupt-controller; - #interrupt-cells = <3>; - - i2c0_pins: i2c0 { - pins = "PA11", "PA12"; - function = "i2c0"; - }; - - i2c1_pins: i2c1 { - pins = "PA18", "PA19"; - function = "i2c1"; - }; - - i2c2_pins: i2c2 { - pins = "PE12", "PE13"; - function = "i2c2"; - }; - - mmc0_pins_a: mmc0@0 { - pins = "PF0", "PF1", "PF2", "PF3", - "PF4", "PF5"; - function = "mmc0"; - drive-strength = <30>; - bias-pull-up; - }; - - mmc0_cd_pin: mmc0_cd_pin@0 { - pins = "PF6"; - function = "gpio_in"; - bias-pull-up; - }; - - mmc1_pins_a: mmc1@0 { - pins = "PG0", "PG1", "PG2", "PG3", - "PG4", "PG5"; - function = "mmc1"; - drive-strength = <30>; - bias-pull-up; - }; - - mmc2_8bit_pins: mmc2_8bit { - pins = "PC5", "PC6", "PC8", - "PC9", "PC10", "PC11", - "PC12", "PC13", "PC14", - "PC15", "PC16"; - function = "mmc2"; - drive-strength = <30>; - bias-pull-up; - }; - - spdif_tx_pins_a: spdif@0 { - pins = "PA17"; - function = "spdif"; - }; - - spi0_pins: spi0 { - pins = "PC0", "PC1", "PC2", "PC3"; - function = "spi0"; - }; - - spi1_pins: spi1 { - pins = "PA15", "PA16", "PA14", "PA13"; - function = "spi1"; - }; - - uart0_pins_a: uart0@0 { - pins = "PA4", "PA5"; - function = "uart0"; - }; - - uart1_pins: uart1 { - pins = "PG6", "PG7"; - function = "uart1"; - }; - - uart1_rts_cts_pins: uart1_rts_cts { - pins = "PG8", "PG9"; - function = "uart1"; - }; - - uart2_pins: uart2 { - pins = "PA0", "PA1"; - function = "uart2"; - }; - - uart3_pins: uart3 { - pins = "PA13", "PA14"; - function = "uart3"; - }; - }; - - timer@01c20c00 { - compatible = "allwinner,sun4i-a10-timer"; - reg = <0x01c20c00 0xa0>; - interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&osc24M>; - }; - - spi0: spi@01c68000 { - compatible = "allwinner,sun8i-h3-spi"; - reg = <0x01c68000 0x1000>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; - clock-names = "ahb", "mod"; - dmas = <&dma 23>, <&dma 23>; - dma-names = "rx", "tx"; - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins>; - resets = <&ccu RST_BUS_SPI0>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - spi1: spi@01c69000 { - compatible = "allwinner,sun8i-h3-spi"; - reg = <0x01c69000 0x1000>; - interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; - clock-names = "ahb", "mod"; - dmas = <&dma 24>, <&dma 24>; - dma-names = "rx", "tx"; - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins>; - resets = <&ccu RST_BUS_SPI1>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - wdt0: watchdog@01c20ca0 { - compatible = "allwinner,sun6i-a31-wdt"; - reg = <0x01c20ca0 0x20>; - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - }; - - spdif: spdif@01c21000 { - #sound-dai-cells = <0>; - compatible = "allwinner,sun8i-h3-spdif"; - reg = <0x01c21000 0x400>; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>; - resets = <&ccu RST_BUS_SPDIF>; - clock-names = "apb", "spdif"; - dmas = <&dma 2>; - dma-names = "tx"; - status = "disabled"; - }; - - pwm: pwm@01c21400 { - compatible = "allwinner,sun8i-h3-pwm"; - reg = <0x01c21400 0x8>; - clocks = <&osc24M>; - #pwm-cells = <3>; - status = "disabled"; - }; - - codec: codec@01c22c00 { - #sound-dai-cells = <0>; - compatible = "allwinner,sun8i-h3-codec"; - reg = <0x01c22c00 0x400>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; - clock-names = "apb", "codec"; - resets = <&ccu RST_BUS_CODEC>; - dmas = <&dma 15>, <&dma 15>; - dma-names = "rx", "tx"; - allwinner,codec-analog-controls = <&codec_analog>; - status = "disabled"; - }; - - uart0: serial@01c28000 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28000 0x400>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_BUS_UART0>; - resets = <&ccu RST_BUS_UART0>; - dmas = <&dma 6>, <&dma 6>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart1: serial@01c28400 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28400 0x400>; - interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_BUS_UART1>; - resets = <&ccu RST_BUS_UART1>; - dmas = <&dma 7>, <&dma 7>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart2: serial@01c28800 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28800 0x400>; - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_BUS_UART2>; - resets = <&ccu RST_BUS_UART2>; - dmas = <&dma 8>, <&dma 8>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart3: serial@01c28c00 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28c00 0x400>; - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_BUS_UART3>; - resets = <&ccu RST_BUS_UART3>; - dmas = <&dma 9>, <&dma 9>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - i2c0: i2c@01c2ac00 { - compatible = "allwinner,sun6i-a31-i2c"; - reg = <0x01c2ac00 0x400>; - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_I2C0>; - resets = <&ccu RST_BUS_I2C0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c1: i2c@01c2b000 { - compatible = "allwinner,sun6i-a31-i2c"; - reg = <0x01c2b000 0x400>; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_I2C1>; - resets = <&ccu RST_BUS_I2C1>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c2: i2c@01c2b400 { - compatible = "allwinner,sun6i-a31-i2c"; - reg = <0x01c2b000 0x400>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_I2C2>; - resets = <&ccu RST_BUS_I2C2>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - gic: interrupt-controller@01c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; - reg = <0x01c81000 0x1000>, - <0x01c82000 0x2000>, - <0x01c84000 0x2000>, - <0x01c86000 0x2000>; - interrupt-controller; - #interrupt-cells = <3>; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - }; - - rtc: rtc@01f00000 { - compatible = "allwinner,sun6i-a31-rtc"; - reg = <0x01f00000 0x54>; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; - }; - - apb0_reset: reset@01f014b0 { - reg = <0x01f014b0 0x4>; - compatible = "allwinner,sun6i-a31-clock-reset"; - #reset-cells = <1>; - }; +&ccu { + compatible = "allwinner,sun8i-h3-ccu"; +}; - codec_analog: codec-analog@01f015c0 { - compatible = "allwinner,sun8i-h3-codec-analog"; - reg = <0x01f015c0 0x4>; - }; +&mmc0 { + compatible = "allwinner,sun7i-a20-mmc"; + clocks = <&ccu CLK_BUS_MMC0>, + <&ccu CLK_MMC0>, + <&ccu CLK_MMC0_OUTPUT>, + <&ccu CLK_MMC0_SAMPLE>; + clock-names = "ahb", + "mmc", + "output", + "sample"; +}; - ir: ir@01f02000 { - compatible = "allwinner,sun5i-a13-ir"; - clocks = <&apb0_gates 1>, <&ir_clk>; - clock-names = "apb", "ir"; - resets = <&apb0_reset 1>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x01f02000 0x40>; - status = "disabled"; - }; +&mmc1 { + compatible = "allwinner,sun7i-a20-mmc"; + clocks = <&ccu CLK_BUS_MMC1>, + <&ccu CLK_MMC1>, + <&ccu CLK_MMC1_OUTPUT>, + <&ccu CLK_MMC1_SAMPLE>; + clock-names = "ahb", + "mmc", + "output", + "sample"; +}; - r_pio: pinctrl@01f02c00 { - compatible = "allwinner,sun8i-h3-r-pinctrl"; - reg = <0x01f02c00 0x400>; - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>; - clock-names = "apb", "hosc", "losc"; - resets = <&apb0_reset 0>; - gpio-controller; - #gpio-cells = <3>; - interrupt-controller; - #interrupt-cells = <3>; +&mmc2 { + compatible = "allwinner,sun7i-a20-mmc"; + clocks = <&ccu CLK_BUS_MMC2>, + <&ccu CLK_MMC2>, + <&ccu CLK_MMC2_OUTPUT>, + <&ccu CLK_MMC2_SAMPLE>; + clock-names = "ahb", + "mmc", + "output", + "sample"; +}; - ir_pins_a: ir@0 { - pins = "PL11"; - function = "s_cir_rx"; - }; - }; - }; +&pio { + compatible = "allwinner,sun8i-h3-pinctrl"; }; diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts index 9112a200fd5e..3741ac71c3d6 100644 --- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts @@ -47,7 +47,6 @@ #include "sun9i-a80.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Cubietech Cubieboard4"; diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index 0fc3a87f5576..85f1ad670310 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -46,7 +46,6 @@ #include "sun9i-a80.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Merrii A80 Optimus Board"; diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 15b6d122f878..759a72317eb8 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -46,8 +46,6 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> - #include <dt-bindings/clock/sun9i-a80-ccu.h> #include <dt-bindings/clock/sun9i-a80-de.h> #include <dt-bindings/clock/sun9i-a80-usb.h> diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi index 17c09fed9e84..ce5c53e4452f 100644 --- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi +++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi @@ -43,7 +43,6 @@ */ #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> &pio { ahci_pwr_pin_a: ahci_pwr_pin@0 { diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi new file mode 100644 index 000000000000..6640ebfa6419 --- /dev/null +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -0,0 +1,618 @@ +/* + * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/clock/sun8i-h3-ccu.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/sun8i-h3-ccu.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc24M: osc24M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + + apb0: apb0_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&osc24M>; + clock-output-names = "apb0"; + }; + + apb0_gates: clk@01f01428 { + compatible = "allwinner,sun8i-h3-apb0-gates-clk", + "allwinner,sun4i-a10-gates-clk"; + reg = <0x01f01428 0x4>; + #clock-cells = <1>; + clocks = <&apb0>; + clock-indices = <0>, <1>; + clock-output-names = "apb0_pio", "apb0_ir"; + }; + + ir_clk: ir_clk@01f01454 { + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01f01454 0x4>; + #clock-cells = <0>; + clocks = <&osc32k>, <&osc24M>; + clock-output-names = "ir"; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dma: dma-controller@01c02000 { + compatible = "allwinner,sun8i-h3-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DMA>; + resets = <&ccu RST_BUS_DMA>; + #dma-cells = <1>; + }; + + mmc0: mmc@01c0f000 { + /* compatible and clocks are in per SoC .dtsi file */ + reg = <0x01c0f000 0x1000>; + resets = <&ccu RST_BUS_MMC0>; + reset-names = "ahb"; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@01c10000 { + /* compatible and clocks are in per SoC .dtsi file */ + reg = <0x01c10000 0x1000>; + resets = <&ccu RST_BUS_MMC1>; + reset-names = "ahb"; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@01c11000 { + /* compatible and clocks are in per SoC .dtsi file */ + reg = <0x01c11000 0x1000>; + resets = <&ccu RST_BUS_MMC2>; + reset-names = "ahb"; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + usb_otg: usb@01c19000 { + compatible = "allwinner,sun8i-h3-musb"; + reg = <0x01c19000 0x400>; + clocks = <&ccu CLK_BUS_OTG>; + resets = <&ccu RST_BUS_OTG>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mc"; + phys = <&usbphy 0>; + phy-names = "usb"; + extcon = <&usbphy 0>; + status = "disabled"; + }; + + usbphy: phy@01c19400 { + compatible = "allwinner,sun8i-h3-usb-phy"; + reg = <0x01c19400 0x2c>, + <0x01c1a800 0x4>, + <0x01c1b800 0x4>, + <0x01c1c800 0x4>, + <0x01c1d800 0x4>; + reg-names = "phy_ctrl", + "pmu0", + "pmu1", + "pmu2", + "pmu3"; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY1>, + <&ccu CLK_USB_PHY2>, + <&ccu CLK_USB_PHY3>; + clock-names = "usb0_phy", + "usb1_phy", + "usb2_phy", + "usb3_phy"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>, + <&ccu RST_USB_PHY2>, + <&ccu RST_USB_PHY3>; + reset-names = "usb0_reset", + "usb1_reset", + "usb2_reset", + "usb3_reset"; + status = "disabled"; + #phy-cells = <1>; + }; + + ehci0: usb@01c1a000 { + compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; + reg = <0x01c1a000 0x100>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>; + resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>; + status = "disabled"; + }; + + ohci0: usb@01c1a400 { + compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; + reg = <0x01c1a400 0x100>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>, + <&ccu CLK_USB_OHCI0>; + resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>; + status = "disabled"; + }; + + ehci1: usb@01c1b000 { + compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; + reg = <0x01c1b000 0x100>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>; + resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci1: usb@01c1b400 { + compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; + reg = <0x01c1b400 0x100>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>, + <&ccu CLK_USB_OHCI1>; + resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ehci2: usb@01c1c000 { + compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; + reg = <0x01c1c000 0x100>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>; + resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; + phys = <&usbphy 2>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci2: usb@01c1c400 { + compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; + reg = <0x01c1c400 0x100>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>, + <&ccu CLK_USB_OHCI2>; + resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; + phys = <&usbphy 2>; + phy-names = "usb"; + status = "disabled"; + }; + + ehci3: usb@01c1d000 { + compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; + reg = <0x01c1d000 0x100>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>; + resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; + phys = <&usbphy 3>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci3: usb@01c1d400 { + compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; + reg = <0x01c1d400 0x100>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>, + <&ccu CLK_USB_OHCI3>; + resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; + phys = <&usbphy 3>; + phy-names = "usb"; + status = "disabled"; + }; + + ccu: clock@01c20000 { + /* compatible is in per SoC .dtsi file */ + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pio: pinctrl@01c20800 { + /* compatible is in per SoC .dtsi file */ + reg = <0x01c20800 0x400>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + + i2c0_pins: i2c0 { + pins = "PA11", "PA12"; + function = "i2c0"; + }; + + i2c1_pins: i2c1 { + pins = "PA18", "PA19"; + function = "i2c1"; + }; + + i2c2_pins: i2c2 { + pins = "PE12", "PE13"; + function = "i2c2"; + }; + + mmc0_pins_a: mmc0@0 { + pins = "PF0", "PF1", "PF2", "PF3", + "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc0_cd_pin: mmc0_cd_pin@0 { + pins = "PF6"; + function = "gpio_in"; + bias-pull-up; + }; + + mmc1_pins_a: mmc1@0 { + pins = "PG0", "PG1", "PG2", "PG3", + "PG4", "PG5"; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc2_8bit_pins: mmc2_8bit { + pins = "PC5", "PC6", "PC8", + "PC9", "PC10", "PC11", + "PC12", "PC13", "PC14", + "PC15", "PC16"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + + spdif_tx_pins_a: spdif@0 { + pins = "PA17"; + function = "spdif"; + }; + + spi0_pins: spi0 { + pins = "PC0", "PC1", "PC2", "PC3"; + function = "spi0"; + }; + + spi1_pins: spi1 { + pins = "PA15", "PA16", "PA14", "PA13"; + function = "spi1"; + }; + + uart0_pins_a: uart0@0 { + pins = "PA4", "PA5"; + function = "uart0"; + }; + + uart1_pins: uart1 { + pins = "PG6", "PG7"; + function = "uart1"; + }; + + uart1_rts_cts_pins: uart1_rts_cts { + pins = "PG8", "PG9"; + function = "uart1"; + }; + + uart2_pins: uart2 { + pins = "PA0", "PA1"; + function = "uart2"; + }; + + uart3_pins: uart3 { + pins = "PA13", "PA14"; + function = "uart3"; + }; + }; + + timer@01c20c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0xa0>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; + }; + + spi0: spi@01c68000 { + compatible = "allwinner,sun8i-h3-spi"; + reg = <0x01c68000 0x1000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; + clock-names = "ahb", "mod"; + dmas = <&dma 23>, <&dma 23>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + resets = <&ccu RST_BUS_SPI0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@01c69000 { + compatible = "allwinner,sun8i-h3-spi"; + reg = <0x01c69000 0x1000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; + clock-names = "ahb", "mod"; + dmas = <&dma 24>, <&dma 24>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + resets = <&ccu RST_BUS_SPI1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + wdt0: watchdog@01c20ca0 { + compatible = "allwinner,sun6i-a31-wdt"; + reg = <0x01c20ca0 0x20>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + }; + + spdif: spdif@01c21000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-h3-spdif"; + reg = <0x01c21000 0x400>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>; + resets = <&ccu RST_BUS_SPDIF>; + clock-names = "apb", "spdif"; + dmas = <&dma 2>; + dma-names = "tx"; + status = "disabled"; + }; + + pwm: pwm@01c21400 { + compatible = "allwinner,sun8i-h3-pwm"; + reg = <0x01c21400 0x8>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; + }; + + codec: codec@01c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-h3-codec"; + reg = <0x01c22c00 0x400>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; + clock-names = "apb", "codec"; + resets = <&ccu RST_BUS_CODEC>; + dmas = <&dma 15>, <&dma 15>; + dma-names = "rx", "tx"; + allwinner,codec-analog-controls = <&codec_analog>; + status = "disabled"; + }; + + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; + dmas = <&dma 6>, <&dma 6>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart1: serial@01c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; + dmas = <&dma 7>, <&dma 7>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart2: serial@01c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; + dmas = <&dma 8>, <&dma 8>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart3: serial@01c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; + dmas = <&dma 9>, <&dma 9>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c0: i2c@01c2ac00 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C0>; + resets = <&ccu RST_BUS_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@01c2b000 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C1>; + resets = <&ccu RST_BUS_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@01c2b400 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C2>; + resets = <&ccu RST_BUS_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gic: interrupt-controller@01c81000 { + compatible = "arm,gic-400"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x2000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + rtc: rtc@01f00000 { + compatible = "allwinner,sun6i-a31-rtc"; + reg = <0x01f00000 0x54>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + }; + + apb0_reset: reset@01f014b0 { + reg = <0x01f014b0 0x4>; + compatible = "allwinner,sun6i-a31-clock-reset"; + #reset-cells = <1>; + }; + + codec_analog: codec-analog@01f015c0 { + compatible = "allwinner,sun8i-h3-codec-analog"; + reg = <0x01f015c0 0x4>; + }; + + ir: ir@01f02000 { + compatible = "allwinner,sun5i-a13-ir"; + clocks = <&apb0_gates 1>, <&ir_clk>; + clock-names = "apb", "ir"; + resets = <&apb0_reset 1>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x01f02000 0x40>; + status = "disabled"; + }; + + r_pio: pinctrl@01f02c00 { + compatible = "allwinner,sun8i-h3-r-pinctrl"; + reg = <0x01f02c00 0x400>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + resets = <&apb0_reset 0>; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + + ir_pins_a: ir@0 { + pins = "PL11"; + function = "s_cir_rx"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi b/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi index b8241462fcea..245d0bcde441 100644 --- a/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi @@ -42,7 +42,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> #include "sunxi-common-regulators.dtsi" &i2c0 { diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts index 110031bc0e7e..e0da4ee21c21 100644 --- a/arch/arm/boot/dts/uniphier-ld4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts @@ -52,11 +52,6 @@ model = "UniPhier LD4 Reference Board"; compatible = "socionext,uniphier-ld4-ref", "socionext,uniphier-ld4"; - memory { - device_type = "memory"; - reg = <0x80000000 0x20000000>; - }; - chosen { stdout-path = "serial0:115200n8"; }; @@ -71,6 +66,11 @@ i2c2 = &i2c2; i2c3 = &i2c3; }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; }; ðsc { diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi index a7c494d7c43a..4f5fe15eaee2 100644 --- a/arch/arm/boot/dts/uniphier-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ld4.dtsi @@ -43,10 +43,10 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "skeleton.dtsi" - / { compatible = "socionext,uniphier-ld4"; + #address-cells = <1>; + #size-cells = <1>; cpus { #address-cells = <1>; diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts index c05d631dcf02..a397a8811c78 100644 --- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts @@ -52,11 +52,6 @@ model = "UniPhier LD6b Reference Board"; compatible = "socionext,uniphier-ld6b-ref", "socionext,uniphier-ld6b"; - memory { - device_type = "memory"; - reg = <0x80000000 0x80000000>; - }; - chosen { stdout-path = "serial0:115200n8"; }; @@ -73,6 +68,11 @@ i2c5 = &i2c5; i2c6 = &i2c6; }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; }; ðsc { diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi index 8ee79da9af7c..246f35ffb638 100644 --- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi +++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi @@ -45,7 +45,7 @@ &pinctrl { pinctrl_emmc: emmc_grp { - groups = "emmc"; + groups = "emmc", "emmc_dat8"; function = "emmc"; }; diff --git a/arch/arm/boot/dts/uniphier-pro4-ace.dts b/arch/arm/boot/dts/uniphier-pro4-ace.dts index 0ab0a40c041e..fefc89149234 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ace.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ace.dts @@ -50,11 +50,6 @@ model = "UniPhier Pro4 Ace Board"; compatible = "socionext,uniphier-pro4-ace", "socionext,uniphier-pro4"; - memory { - device_type = "memory"; - reg = <0x80000000 0x40000000>; - }; - chosen { stdout-path = "serial0:115200n8"; }; @@ -70,6 +65,11 @@ i2c5 = &i2c5; i2c6 = &i2c6; }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; }; &serial0 { @@ -90,6 +90,7 @@ eeprom@54 { compatible = "st,24c64"; reg = <0x54>; + pagesize = <32>; }; }; diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts index 9e92e60d25ce..6077e634d14a 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ref.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts @@ -52,11 +52,6 @@ model = "UniPhier Pro4 Reference Board"; compatible = "socionext,uniphier-pro4-ref", "socionext,uniphier-pro4"; - memory { - device_type = "memory"; - reg = <0x80000000 0x40000000>; - }; - chosen { stdout-path = "serial0:115200n8"; }; @@ -73,6 +68,11 @@ i2c5 = &i2c5; i2c6 = &i2c6; }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; }; ðsc { diff --git a/arch/arm/boot/dts/uniphier-pro4-sanji.dts b/arch/arm/boot/dts/uniphier-pro4-sanji.dts index dc4ea8832ce2..6c63c8bad825 100644 --- a/arch/arm/boot/dts/uniphier-pro4-sanji.dts +++ b/arch/arm/boot/dts/uniphier-pro4-sanji.dts @@ -50,11 +50,6 @@ model = "UniPhier Pro4 Sanji Board"; compatible = "socionext,uniphier-pro4-sanji", "socionext,uniphier-pro4"; - memory { - device_type = "memory"; - reg = <0x80000000 0x80000000>; - }; - chosen { stdout-path = "serial0:115200n8"; }; @@ -69,6 +64,11 @@ i2c5 = &i2c5; i2c6 = &i2c6; }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; }; &serial0 { @@ -85,6 +85,7 @@ eeprom@54 { compatible = "st,24c64"; reg = <0x54>; + pagesize = <32>; }; }; diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi index e960b09ff01c..794a85a7068b 100644 --- a/arch/arm/boot/dts/uniphier-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-pro4.dtsi @@ -43,10 +43,10 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "skeleton.dtsi" - / { compatible = "socionext,uniphier-pro4"; + #address-cells = <1>; + #size-cells = <1>; cpus { #address-cells = <1>; diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi index dbc5e5333163..df07b555cbed 100644 --- a/arch/arm/boot/dts/uniphier-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-pro5.dtsi @@ -43,10 +43,10 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "skeleton.dtsi" - / { compatible = "socionext,uniphier-pro5"; + #address-cells = <1>; + #size-cells = <1>; cpus { #address-cells = <1>; diff --git a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts index 373818ace086..cccc86658d20 100644 --- a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts +++ b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts @@ -51,11 +51,6 @@ compatible = "socionext,uniphier-pxs2-gentil", "socionext,uniphier-pxs2"; - memory { - device_type = "memory"; - reg = <0x80000000 0x80000000>; - }; - chosen { stdout-path = "serial0:115200n8"; }; @@ -70,6 +65,11 @@ i2c5 = &i2c5; i2c6 = &i2c6; }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; }; &serial2 { @@ -82,6 +82,7 @@ eeprom@54 { compatible = "st,24c64"; reg = <0x54>; + pagesize = <32>; }; }; diff --git a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts index 51a3eacddfc6..803a39aa39d0 100644 --- a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts +++ b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts @@ -50,11 +50,6 @@ model = "UniPhier PXs2 Vodka Board"; compatible = "socionext,uniphier-pxs2-vodka", "socionext,uniphier-pxs2"; - memory { - device_type = "memory"; - reg = <0x80000000 0x80000000>; - }; - chosen { stdout-path = "serial0:115200n8"; }; @@ -68,6 +63,11 @@ i2c5 = &i2c5; i2c6 = &i2c6; }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; }; &serial2 { diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index e9e031d63c1a..58c3e2f35706 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -43,10 +43,10 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "skeleton.dtsi" - / { compatible = "socionext,uniphier-pxs2"; + #address-cells = <1>; + #size-cells = <1>; cpus { #address-cells = <1>; diff --git a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi index f7df0881c5e0..c62ae1a81f47 100644 --- a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi +++ b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi @@ -1,7 +1,8 @@ /* * Device Tree Source for UniPhier Reference Daughter Board * - * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * Copyright (C) 2015-2017 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -46,5 +47,6 @@ eeprom@50 { compatible = "microchip,24lc128"; reg = <0x50>; + pagesize = <64>; }; }; diff --git a/arch/arm/boot/dts/uniphier-sld3-ref.dts b/arch/arm/boot/dts/uniphier-sld3-ref.dts index ac792ae07ae0..eb63dcca92b5 100644 --- a/arch/arm/boot/dts/uniphier-sld3-ref.dts +++ b/arch/arm/boot/dts/uniphier-sld3-ref.dts @@ -52,12 +52,6 @@ model = "UniPhier sLD3 Reference Board"; compatible = "socionext,uniphier-sld3-ref", "socionext,uniphier-sld3"; - memory { - device_type = "memory"; - reg = <0x80000000 0x20000000 - 0xc0000000 0x20000000>; - }; - chosen { stdout-path = "serial0:115200n8"; }; @@ -72,6 +66,12 @@ i2c3 = &i2c3; i2c4 = &i2c4; }; + + memory@8000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000 + 0xc0000000 0x20000000>; + }; }; ðsc { diff --git a/arch/arm/boot/dts/uniphier-sld3.dtsi b/arch/arm/boot/dts/uniphier-sld3.dtsi index 9fad6bd2db8a..01d77edac01f 100644 --- a/arch/arm/boot/dts/uniphier-sld3.dtsi +++ b/arch/arm/boot/dts/uniphier-sld3.dtsi @@ -43,10 +43,10 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "skeleton.dtsi" - / { compatible = "socionext,uniphier-sld3"; + #address-cells = <1>; + #size-cells = <1>; cpus { #address-cells = <1>; diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts index a8291f988066..737d276349fd 100644 --- a/arch/arm/boot/dts/uniphier-sld8-ref.dts +++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts @@ -52,11 +52,6 @@ model = "UniPhier sLD8 Reference Board"; compatible = "socionext,uniphier-sld8-ref", "socionext,uniphier-sld8"; - memory { - device_type = "memory"; - reg = <0x80000000 0x20000000>; - }; - chosen { stdout-path = "serial0:115200n8"; }; @@ -71,6 +66,11 @@ i2c2 = &i2c2; i2c3 = &i2c3; }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; }; ðsc { diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi index b2c980ead7f0..eb06fdc04b02 100644 --- a/arch/arm/boot/dts/uniphier-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-sld8.dtsi @@ -43,10 +43,10 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "skeleton.dtsi" - / { compatible = "socionext,uniphier-sld8"; + #address-cells = <1>; + #size-cells = <1>; cpus { #address-cells = <1>; diff --git a/arch/arm/boot/dts/uniphier-support-card.dtsi b/arch/arm/boot/dts/uniphier-support-card.dtsi index 51ecc9b9c0ce..f61dfec2807f 100644 --- a/arch/arm/boot/dts/uniphier-support-card.dtsi +++ b/arch/arm/boot/dts/uniphier-support-card.dtsi @@ -1,7 +1,8 @@ /* * Device Tree Source for UniPhier Support Card (Expansion Board) * - * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * Copyright (C) 2015-2017 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -46,7 +47,7 @@ status = "okay"; ranges = <1 0x00000000 0x42000000 0x02000000>; - support_card: support_card { + support_card: support_card@1,1f00000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index 3086efacd00e..35714ff6f467 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -71,7 +71,7 @@ #size-cells = <1>; ranges = <0 3 0 0x200000>; - v2m_sysreg: sysreg@010000 { + v2m_sysreg: sysreg@10000 { compatible = "arm,vexpress-sysreg"; reg = <0x010000 0x1000>; @@ -94,7 +94,7 @@ }; }; - v2m_sysctl: sysctl@020000 { + v2m_sysctl: sysctl@20000 { compatible = "arm,sp810", "arm,primecell"; reg = <0x020000 0x1000>; clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>; @@ -106,7 +106,7 @@ }; /* PCI-E I2C bus */ - v2m_i2c_pcie: i2c@030000 { + v2m_i2c_pcie: i2c@30000 { compatible = "arm,versatile-i2c"; reg = <0x030000 0x1000>; @@ -119,7 +119,7 @@ }; }; - aaci@040000 { + aaci@40000 { compatible = "arm,pl041", "arm,primecell"; reg = <0x040000 0x1000>; interrupts = <11>; @@ -127,7 +127,7 @@ clock-names = "apb_pclk"; }; - mmci@050000 { + mmci@50000 { compatible = "arm,pl180", "arm,primecell"; reg = <0x050000 0x1000>; interrupts = <9 10>; @@ -139,7 +139,7 @@ clock-names = "mclk", "apb_pclk"; }; - kmi@060000 { + kmi@60000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x060000 0x1000>; interrupts = <12>; @@ -147,7 +147,7 @@ clock-names = "KMIREFCLK", "apb_pclk"; }; - kmi@070000 { + kmi@70000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x070000 0x1000>; interrupts = <13>; @@ -155,7 +155,7 @@ clock-names = "KMIREFCLK", "apb_pclk"; }; - v2m_serial0: uart@090000 { + v2m_serial0: uart@90000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x090000 0x1000>; interrupts = <5>; @@ -163,7 +163,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial1: uart@0a0000 { + v2m_serial1: uart@a0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0a0000 0x1000>; interrupts = <6>; @@ -171,7 +171,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial2: uart@0b0000 { + v2m_serial2: uart@b0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0b0000 0x1000>; interrupts = <7>; @@ -179,7 +179,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial3: uart@0c0000 { + v2m_serial3: uart@c0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0c0000 0x1000>; interrupts = <8>; @@ -187,7 +187,7 @@ clock-names = "uartclk", "apb_pclk"; }; - wdt@0f0000 { + wdt@f0000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0f0000 0x1000>; interrupts = <0>; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index c6393d3f1719..1b6f6393be93 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -70,7 +70,7 @@ #size-cells = <1>; ranges = <0 7 0 0x20000>; - v2m_sysreg: sysreg@00000 { + v2m_sysreg: sysreg@0 { compatible = "arm,vexpress-sysreg"; reg = <0x00000 0x1000>; @@ -93,7 +93,7 @@ }; }; - v2m_sysctl: sysctl@01000 { + v2m_sysctl: sysctl@1000 { compatible = "arm,sp810", "arm,primecell"; reg = <0x01000 0x1000>; clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>; @@ -105,7 +105,7 @@ }; /* PCI-E I2C bus */ - v2m_i2c_pcie: i2c@02000 { + v2m_i2c_pcie: i2c@2000 { compatible = "arm,versatile-i2c"; reg = <0x02000 0x1000>; @@ -118,7 +118,7 @@ }; }; - aaci@04000 { + aaci@4000 { compatible = "arm,pl041", "arm,primecell"; reg = <0x04000 0x1000>; interrupts = <11>; @@ -126,7 +126,7 @@ clock-names = "apb_pclk"; }; - mmci@05000 { + mmci@5000 { compatible = "arm,pl180", "arm,primecell"; reg = <0x05000 0x1000>; interrupts = <9 10>; @@ -138,7 +138,7 @@ clock-names = "mclk", "apb_pclk"; }; - kmi@06000 { + kmi@6000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x06000 0x1000>; interrupts = <12>; @@ -146,7 +146,7 @@ clock-names = "KMIREFCLK", "apb_pclk"; }; - kmi@07000 { + kmi@7000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x07000 0x1000>; interrupts = <13>; @@ -154,7 +154,7 @@ clock-names = "KMIREFCLK", "apb_pclk"; }; - v2m_serial0: uart@09000 { + v2m_serial0: uart@9000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x09000 0x1000>; interrupts = <5>; @@ -162,7 +162,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial1: uart@0a000 { + v2m_serial1: uart@a000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0a000 0x1000>; interrupts = <6>; @@ -170,7 +170,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial2: uart@0b000 { + v2m_serial2: uart@b000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0b000 0x1000>; interrupts = <7>; @@ -178,7 +178,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial3: uart@0c000 { + v2m_serial3: uart@c000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0c000 0x1000>; interrupts = <8>; @@ -186,7 +186,7 @@ clock-names = "uartclk", "apb_pclk"; }; - wdt@0f000 { + wdt@f000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0f000 0x1000>; interrupts = <0>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index 15f4fd3f4695..0c8de0ca73ee 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -220,7 +220,7 @@ }; }; - smb@08000000 { + smb@8000000 { compatible = "simple-bus"; #address-cells = <2>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index bd107c5a0226..65ecf206388c 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -385,7 +385,7 @@ }; }; - etb@0,20010000 { + etb@20010000 { compatible = "arm,coresight-etb10", "arm,primecell"; reg = <0 0x20010000 0 0x1000>; @@ -399,7 +399,7 @@ }; }; - tpiu@0,20030000 { + tpiu@20030000 { compatible = "arm,coresight-tpiu", "arm,primecell"; reg = <0 0x20030000 0 0x1000>; @@ -449,7 +449,7 @@ }; }; - funnel@0,20040000 { + funnel@20040000 { compatible = "arm,coresight-funnel", "arm,primecell"; reg = <0 0x20040000 0 0x1000>; @@ -513,7 +513,7 @@ }; }; - ptm@0,2201c000 { + ptm@2201c000 { compatible = "arm,coresight-etm3x", "arm,primecell"; reg = <0 0x2201c000 0 0x1000>; @@ -527,7 +527,7 @@ }; }; - ptm@0,2201d000 { + ptm@2201d000 { compatible = "arm,coresight-etm3x", "arm,primecell"; reg = <0 0x2201d000 0 0x1000>; @@ -541,7 +541,7 @@ }; }; - etm@0,2203c000 { + etm@2203c000 { compatible = "arm,coresight-etm3x", "arm,primecell"; reg = <0 0x2203c000 0 0x1000>; @@ -555,7 +555,7 @@ }; }; - etm@0,2203d000 { + etm@2203d000 { compatible = "arm,coresight-etm3x", "arm,primecell"; reg = <0 0x2203d000 0 0x1000>; @@ -569,7 +569,7 @@ }; }; - etm@0,2203e000 { + etm@2203e000 { compatible = "arm,coresight-etm3x", "arm,primecell"; reg = <0 0x2203e000 0 0x1000>; @@ -583,7 +583,7 @@ }; }; - smb@08000000 { + smb@8000000 { compatible = "simple-bus"; #address-cells = <2>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts index 1acecaf4b13d..6e69b8e6c1a7 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts @@ -190,7 +190,7 @@ }; }; - smb@08000000 { + smb@8000000 { compatible = "simple-bus"; #address-cells = <2>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts index b608a03ee02f..c9305b58afc2 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts @@ -300,7 +300,7 @@ }; }; - smb@04000000 { + smb@4000000 { compatible = "simple-bus"; #address-cells = <2>; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index 7940408838df..37f95427616f 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -239,7 +239,7 @@ #size-cells = <0>; reg = <4>; - switch2: switch2@0 { + switch2: switch@0 { compatible = "marvell,mv88e6085"; #address-cells = <1>; #size-cells = <0>; @@ -459,18 +459,6 @@ >; }; - pinctrl_gpio_switch0: pinctrl-gpio-switch0 { - fsl,pins = < - VF610_PAD_PTB5__GPIO_27 0x219d - >; - }; - - pinctrl_gpio_switch1: pinctrl-gpio-switch1 { - fsl,pins = < - VF610_PAD_PTB4__GPIO_26 0x219d - >; - }; - pinctrl_mdio_mux: pinctrl-mdio-mux { fsl,pins = < VF610_PAD_PTA18__GPIO_8 0x31c2 diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts index 6a45bd24ffe6..db3b408ea55a 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts @@ -67,11 +67,17 @@ switch0: switch@0 { compatible = "marvell,mv88e6190"; + pinctrl-0 = <&pinctrl_gpio_switch0>; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; reg = <0>; dsa,member = <0 0>; eeprom-length = <512>; + interrupt-parent = <&gpio0>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; ports { #address-cells = <1>; @@ -91,21 +97,25 @@ port@1 { reg = <1>; label = "lan1"; + phy-handle = <&switch0phy1>; }; port@2 { reg = <2>; label = "lan2"; + phy-handle = <&switch0phy2>; }; port@3 { reg = <3>; label = "lan3"; + phy-handle = <&switch0phy3>; }; port@4 { reg = <4>; label = "lan4"; + phy-handle = <&switch0phy4>; }; switch0port10: port@10 { @@ -115,6 +125,35 @@ link = <&switch1port10>; }; }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy1: switch0phy@1 { + reg = <1>; + interrupt-parent = <&switch0>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + }; + + switch0phy2: switch0phy@2 { + reg = <2>; + interrupt-parent = <&switch0>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + }; + + switch0phy3: switch0phy@3 { + reg = <3>; + interrupt-parent = <&switch0>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; + }; + + switch0phy4: switch0phy@4 { + reg = <4>; + interrupt-parent = <&switch0>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + }; + }; }; }; @@ -125,11 +164,17 @@ switch1: switch@0 { compatible = "marvell,mv88e6190"; + pinctrl-0 = <&pinctrl_gpio_switch1>; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; reg = <0>; dsa,member = <0 1>; eeprom-length = <512>; + interrupt-parent = <&gpio0>; + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; ports { #address-cells = <1>; @@ -138,21 +183,25 @@ port@1 { reg = <1>; label = "lan5"; + phy-handle = <&switch1phy1>; }; port@2 { reg = <2>; label = "lan6"; + phy-handle = <&switch1phy2>; }; port@3 { reg = <3>; label = "lan7"; + phy-handle = <&switch1phy3>; }; port@4 { reg = <4>; label = "lan8"; + phy-handle = <&switch1phy4>; }; @@ -163,6 +212,34 @@ link = <&switch0port10>; }; }; + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch1phy1: switch1phy@1 { + reg = <1>; + interrupt-parent = <&switch1>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + }; + + switch1phy2: switch1phy@2 { + reg = <2>; + interrupt-parent = <&switch1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + }; + + switch1phy3: switch1phy@3 { + reg = <3>; + interrupt-parent = <&switch1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; + }; + + switch1phy4: switch1phy@4 { + reg = <4>; + interrupt-parent = <&switch1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi index ca9e1bc35e45..6b58d3a97992 100644 --- a/arch/arm/boot/dts/vf610-zii-dev.dtsi +++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi @@ -296,6 +296,18 @@ >; }; + pinctrl_gpio_switch0: pinctrl-gpio-switch0 { + fsl,pins = < + VF610_PAD_PTB5__GPIO_27 0x219d + >; + }; + + pinctrl_gpio_switch1: pinctrl-gpio-switch1 { + fsl,pins = < + VF610_PAD_PTB4__GPIO_26 0x219d + >; + }; + pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset { fsl,pins = < VF610_PAD_PTE14__GPIO_119 0x31c2 diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index 098ad557fee3..e2b0da2c0bc7 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -106,6 +106,13 @@ }; }; + irda_regulator: irda-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpr3 3 GPIO_ACTIVE_HIGH>; + regulator-name = "irda_regulator"; + }; + sound { compatible = "samsung,tm2-audio"; audio-codec = <&wm5110>; @@ -298,6 +305,8 @@ status = "okay"; vddcore-supply = <&ldo6_reg>; vddio-supply = <&ldo7_reg>; + samsung,burst-clock-frequency = <512000000>; + samsung,esc-clock-frequency = <16000000>; samsung,pll-clock-frequency = <24000000>; pinctrl-names = "default"; pinctrl-0 = <&te_irq>; @@ -749,6 +758,19 @@ }; }; +&hsi2c_5 { + status = "okay"; + + stmfts: touchscreen@49 { + compatible = "st,stmfts"; + reg = <0x49>; + interrupt-parent = <&gpa1>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <&ldo30_reg>; + vdd-supply = <&ldo31_reg>; + }; +}; + &hsi2c_7 { status = "okay"; @@ -894,7 +916,7 @@ PIN(INPUT, gpa0-7, NONE, FAST_SR1); PIN(INPUT, gpa1-0, UP, FAST_SR1); - PIN(INPUT, gpa1-1, NONE, FAST_SR1); + PIN(INPUT, gpa1-1, UP, FAST_SR1); PIN(INPUT, gpa1-2, NONE, FAST_SR1); PIN(INPUT, gpa1-3, DOWN, FAST_SR1); PIN(INPUT, gpa1-4, DOWN, FAST_SR1); @@ -1074,7 +1096,6 @@ PIN(INPUT, gpg3-0, DOWN, FAST_SR1); PIN(INPUT, gpg3-1, DOWN, FAST_SR1); PIN(INPUT, gpg3-5, DOWN, FAST_SR1); - PIN(INPUT, gpg3-7, DOWN, FAST_SR1); }; }; @@ -1152,6 +1173,24 @@ }; }; +&spi_3 { + status = "okay"; + no-cs-readback; + + irled@0 { + compatible = "ir-spi-led"; + reg = <0x0>; + spi-max-frequency = <5000000>; + power-supply = <&irda_regulator>; + duty-cycle = <60>; + led-active-low; + + controller-data { + samsung,spi-feedback-delay = <0>; + }; + }; +}; + &timer { clock-frequency = <24000000>; }; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts index dea0a6f5bc18..3ff95277a8ec 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -52,6 +52,18 @@ assigned-clock-rates = <250000000>, <400000000>; }; +&dsi { + panel@0 { + compatible = "samsung,s6e3ha2"; + reg = <0>; + vdd3-supply = <&ldo27_reg>; + vci-supply = <&ldo28_reg>; + reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>; + enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>; + te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>; + }; +}; + &hsi2c_9 { status = "okay"; @@ -76,3 +88,8 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; }; + +&stmfts { + touchscreen-size-x = <1439>; + touchscreen-size-y = <2559>; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts index 7891a31adc17..b73e1231a86f 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts @@ -52,6 +52,17 @@ assigned-clock-rates = <278000000>, <400000000>; }; +&dsi { + panel@0 { + compatible = "samsung,s6e3hf2"; + reg = <0>; + vdd3-supply = <&ldo27_reg>; + vci-supply = <&ldo28_reg>; + reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>; + enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>; + }; +}; + &ldo31_reg { regulator-name = "TSP_VDD_1.8V_AP"; regulator-min-microvolt = <1800000>; @@ -63,3 +74,10 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + +&stmfts { + touchscreen-size-x = <1599>; + touchscreen-size-y = <2559>; + touch-key-connected; + ledvdd-supply = <&ldo33_reg>; +}; diff --git a/arch/arm64/boot/dts/include/arm b/arch/arm64/boot/dts/include/arm new file mode 120000 index 000000000000..cf63d80e2b93 --- /dev/null +++ b/arch/arm64/boot/dts/include/arm @@ -0,0 +1 @@ +../../../../arm/boot/dts
\ No newline at end of file diff --git a/arch/arm64/boot/dts/include/arm64 b/arch/arm64/boot/dts/include/arm64 new file mode 120000 index 000000000000..a96aa0ea9d8c --- /dev/null +++ b/arch/arm64/boot/dts/include/arm64 @@ -0,0 +1 @@ +..
\ No newline at end of file diff --git a/include/dt-bindings/clock/r7s72100-clock.h b/include/dt-bindings/clock/r7s72100-clock.h index ce09915c298f..bc256d31099a 100644 --- a/include/dt-bindings/clock/r7s72100-clock.h +++ b/include/dt-bindings/clock/r7s72100-clock.h @@ -29,6 +29,9 @@ #define R7S72100_CLK_OSTM0 1 #define R7S72100_CLK_OSTM1 0 +/* MSTP6 */ +#define R7S72100_CLK_RTC 0 + /* MSTP7 */ #define R7S72100_CLK_ETHER 4 @@ -49,7 +52,9 @@ #define R7S72100_CLK_SPI4 3 /* MSTP12 */ -#define R7S72100_CLK_SDHI0 3 -#define R7S72100_CLK_SDHI1 2 +#define R7S72100_CLK_SDHI00 3 +#define R7S72100_CLK_SDHI01 2 +#define R7S72100_CLK_SDHI10 1 +#define R7S72100_CLK_SDHI11 0 #endif /* __DT_BINDINGS_CLOCK_R7S72100_H__ */ diff --git a/include/dt-bindings/clock/r8a73a4-clock.h b/include/dt-bindings/clock/r8a73a4-clock.h index dd11ecdf837e..4b3668157257 100644 --- a/include/dt-bindings/clock/r8a73a4-clock.h +++ b/include/dt-bindings/clock/r8a73a4-clock.h @@ -54,6 +54,7 @@ #define R8A73A4_CLK_IIC3 11 #define R8A73A4_CLK_IIC4 10 #define R8A73A4_CLK_IIC5 9 +#define R8A73A4_CLK_INTC_SYS 8 #define R8A73A4_CLK_IRQC 7 /* MSTP5 */ diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h index fa5e8da809f2..20641fa68e73 100644 --- a/include/dt-bindings/clock/r8a7790-clock.h +++ b/include/dt-bindings/clock/r8a7790-clock.h @@ -82,6 +82,7 @@ /* MSTP4 */ #define R8A7790_CLK_IRQC 7 +#define R8A7790_CLK_INTC_SYS 8 /* MSTP5 */ #define R8A7790_CLK_AUDIO_DMAC1 1 diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h index ffa11379b3f0..adc50dc31ab3 100644 --- a/include/dt-bindings/clock/r8a7791-clock.h +++ b/include/dt-bindings/clock/r8a7791-clock.h @@ -72,6 +72,7 @@ /* MSTP4 */ #define R8A7791_CLK_IRQC 7 +#define R8A7791_CLK_INTC_SYS 8 /* MSTP5 */ #define R8A7791_CLK_AUDIO_DMAC1 1 diff --git a/include/dt-bindings/clock/r8a7792-clock.h b/include/dt-bindings/clock/r8a7792-clock.h index 9a8b392ceb00..5be90bc23bd7 100644 --- a/include/dt-bindings/clock/r8a7792-clock.h +++ b/include/dt-bindings/clock/r8a7792-clock.h @@ -17,7 +17,6 @@ #define R8A7792_CLK_PLL3 3 #define R8A7792_CLK_LB 4 #define R8A7792_CLK_QSPI 5 -#define R8A7792_CLK_Z 6 /* MSTP0 */ #define R8A7792_CLK_MSIOF0 0 @@ -45,6 +44,7 @@ /* MSTP4 */ #define R8A7792_CLK_IRQC 7 +#define R8A7792_CLK_INTC_SYS 8 /* MSTP5 */ #define R8A7792_CLK_AUDIO_DMAC0 2 diff --git a/include/dt-bindings/clock/r8a7793-clock.h b/include/dt-bindings/clock/r8a7793-clock.h index efcbc594fe82..7318d45d4e7e 100644 --- a/include/dt-bindings/clock/r8a7793-clock.h +++ b/include/dt-bindings/clock/r8a7793-clock.h @@ -77,10 +77,11 @@ /* MSTP4 */ #define R8A7793_CLK_IRQC 7 +#define R8A7793_CLK_INTC_SYS 8 /* MSTP5 */ -#define R8A7793_CLK_AUDIO_DMAC1 1 -#define R8A7793_CLK_AUDIO_DMAC0 2 +#define R8A7793_CLK_AUDIO_DMAC1 1 +#define R8A7793_CLK_AUDIO_DMAC0 2 #define R8A7793_CLK_ADSP_MOD 6 #define R8A7793_CLK_THERMAL 22 #define R8A7793_CLK_PWM 23 diff --git a/include/dt-bindings/clock/r8a7794-clock.h b/include/dt-bindings/clock/r8a7794-clock.h index 88e64846cf37..93e99c3ffc8d 100644 --- a/include/dt-bindings/clock/r8a7794-clock.h +++ b/include/dt-bindings/clock/r8a7794-clock.h @@ -64,6 +64,7 @@ /* MSTP4 */ #define R8A7794_CLK_IRQC 7 +#define R8A7794_CLK_INTC_SYS 8 /* MSTP5 */ #define R8A7794_CLK_AUDIO_DMAC0 2 @@ -81,6 +82,7 @@ #define R8A7794_CLK_SCIF2 19 #define R8A7794_CLK_SCIF1 20 #define R8A7794_CLK_SCIF0 21 +#define R8A7794_CLK_DU1 23 #define R8A7794_CLK_DU0 24 /* MSTP8 */ diff --git a/include/dt-bindings/mfd/stm32f7-rcc.h b/include/dt-bindings/mfd/stm32f7-rcc.h new file mode 100644 index 000000000000..e36cc69959c7 --- /dev/null +++ b/include/dt-bindings/mfd/stm32f7-rcc.h @@ -0,0 +1,112 @@ +/* + * This header provides constants for the STM32F7 RCC IP + */ + +#ifndef _DT_BINDINGS_MFD_STM32F7_RCC_H +#define _DT_BINDINGS_MFD_STM32F7_RCC_H + +/* AHB1 */ +#define STM32F7_RCC_AHB1_GPIOA 0 +#define STM32F7_RCC_AHB1_GPIOB 1 +#define STM32F7_RCC_AHB1_GPIOC 2 +#define STM32F7_RCC_AHB1_GPIOD 3 +#define STM32F7_RCC_AHB1_GPIOE 4 +#define STM32F7_RCC_AHB1_GPIOF 5 +#define STM32F7_RCC_AHB1_GPIOG 6 +#define STM32F7_RCC_AHB1_GPIOH 7 +#define STM32F7_RCC_AHB1_GPIOI 8 +#define STM32F7_RCC_AHB1_GPIOJ 9 +#define STM32F7_RCC_AHB1_GPIOK 10 +#define STM32F7_RCC_AHB1_CRC 12 +#define STM32F7_RCC_AHB1_BKPSRAM 18 +#define STM32F7_RCC_AHB1_DTCMRAM 20 +#define STM32F7_RCC_AHB1_DMA1 21 +#define STM32F7_RCC_AHB1_DMA2 22 +#define STM32F7_RCC_AHB1_DMA2D 23 +#define STM32F7_RCC_AHB1_ETHMAC 25 +#define STM32F7_RCC_AHB1_ETHMACTX 26 +#define STM32F7_RCC_AHB1_ETHMACRX 27 +#define STM32FF_RCC_AHB1_ETHMACPTP 28 +#define STM32F7_RCC_AHB1_OTGHS 29 +#define STM32F7_RCC_AHB1_OTGHSULPI 30 + +#define STM32F7_AHB1_RESET(bit) (STM32F7_RCC_AHB1_##bit + (0x10 * 8)) +#define STM32F7_AHB1_CLOCK(bit) (STM32F7_RCC_AHB1_##bit) + + +/* AHB2 */ +#define STM32F7_RCC_AHB2_DCMI 0 +#define STM32F7_RCC_AHB2_CRYP 4 +#define STM32F7_RCC_AHB2_HASH 5 +#define STM32F7_RCC_AHB2_RNG 6 +#define STM32F7_RCC_AHB2_OTGFS 7 + +#define STM32F7_AHB2_RESET(bit) (STM32F7_RCC_AHB2_##bit + (0x14 * 8)) +#define STM32F7_AHB2_CLOCK(bit) (STM32F7_RCC_AHB2_##bit + 0x20) + +/* AHB3 */ +#define STM32F7_RCC_AHB3_FMC 0 +#define STM32F7_RCC_AHB3_QSPI 1 + +#define STM32F7_AHB3_RESET(bit) (STM32F7_RCC_AHB3_##bit + (0x18 * 8)) +#define STM32F7_AHB3_CLOCK(bit) (STM32F7_RCC_AHB3_##bit + 0x40) + +/* APB1 */ +#define STM32F7_RCC_APB1_TIM2 0 +#define STM32F7_RCC_APB1_TIM3 1 +#define STM32F7_RCC_APB1_TIM4 2 +#define STM32F7_RCC_APB1_TIM5 3 +#define STM32F7_RCC_APB1_TIM6 4 +#define STM32F7_RCC_APB1_TIM7 5 +#define STM32F7_RCC_APB1_TIM12 6 +#define STM32F7_RCC_APB1_TIM13 7 +#define STM32F7_RCC_APB1_TIM14 8 +#define STM32F7_RCC_APB1_LPTIM1 9 +#define STM32F7_RCC_APB1_WWDG 11 +#define STM32F7_RCC_APB1_SPI2 14 +#define STM32F7_RCC_APB1_SPI3 15 +#define STM32F7_RCC_APB1_SPDIFRX 16 +#define STM32F7_RCC_APB1_UART2 17 +#define STM32F7_RCC_APB1_UART3 18 +#define STM32F7_RCC_APB1_UART4 19 +#define STM32F7_RCC_APB1_UART5 20 +#define STM32F7_RCC_APB1_I2C1 21 +#define STM32F7_RCC_APB1_I2C2 22 +#define STM32F7_RCC_APB1_I2C3 23 +#define STM32F7_RCC_APB1_I2C4 24 +#define STM32F7_RCC_APB1_CAN1 25 +#define STM32F7_RCC_APB1_CAN2 26 +#define STM32F7_RCC_APB1_CEC 27 +#define STM32F7_RCC_APB1_PWR 28 +#define STM32F7_RCC_APB1_DAC 29 +#define STM32F7_RCC_APB1_UART7 30 +#define STM32F7_RCC_APB1_UART8 31 + +#define STM32F7_APB1_RESET(bit) (STM32F7_RCC_APB1_##bit + (0x20 * 8)) +#define STM32F7_APB1_CLOCK(bit) (STM32F7_RCC_APB1_##bit + 0x80) + +/* APB2 */ +#define STM32F7_RCC_APB2_TIM1 0 +#define STM32F7_RCC_APB2_TIM8 1 +#define STM32F7_RCC_APB2_USART1 4 +#define STM32F7_RCC_APB2_USART6 5 +#define STM32F7_RCC_APB2_ADC1 8 +#define STM32F7_RCC_APB2_ADC2 9 +#define STM32F7_RCC_APB2_ADC3 10 +#define STM32F7_RCC_APB2_SDMMC1 11 +#define STM32F7_RCC_APB2_SPI1 12 +#define STM32F7_RCC_APB2_SPI4 13 +#define STM32F7_RCC_APB2_SYSCFG 14 +#define STM32F7_RCC_APB2_TIM9 16 +#define STM32F7_RCC_APB2_TIM10 17 +#define STM32F7_RCC_APB2_TIM11 18 +#define STM32F7_RCC_APB2_SPI5 20 +#define STM32F7_RCC_APB2_SPI6 21 +#define STM32F7_RCC_APB2_SAI1 22 +#define STM32F7_RCC_APB2_SAI2 23 +#define STM32F7_RCC_APB2_LTDC 26 + +#define STM32F7_APB2_RESET(bit) (STM32F7_RCC_APB2_##bit + (0x24 * 8)) +#define STM32F7_APB2_CLOCK(bit) (STM32F7_RCC_APB2_##bit + 0xA0) + +#endif /* _DT_BINDINGS_MFD_STM32F7_RCC_H */ |