cxgb4: Add support for T4 configuration file

Starting with T4 firmware version 1.3.11.0 the firmware now supports device
configuration via a Firmware Configuration File. The Firmware Configuration
File was primarily developed in order to centralize all of the configuration,
resource allocation, etc. for Unified Wire operation where multiple
Physical / Virtual Function Drivers would be using a T4 adapter simultaneously.

The Firmware Configuration file can live in three locations as shown below
in order of precedence.
1) User defined configuration file: /lib/firmware/cxgb4/t4-config.txt
2) Factory Default configuration file written to FLASH within
   the manufacturing process.
3) Hardwired driver configuration.

Signed-off-by: Jay Hernandez <jay@chelsio.com>
Signed-off-by: Vipul Pandya <vipul@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

6 files changed, 920 insertions, 133 deletions

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
index ae040cf255a4..777cbb4f62bb 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
@@ -211,6 +211,9 @@ struct tp_err_stats {
 struct tp_params {
 	unsigned int ntxchan;        /* # of Tx channels */
 	unsigned int tre;            /* log2 of core clocks per TP tick */
+
+	uint32_t dack_re;            /* DACK timer resolution */
+	unsigned short tx_modq[NCHAN];	/* channel to modulation queue map */
 };
 
 struct vpd_params {
@@ -519,6 +522,8 @@ struct adapter {
 	struct net_device *port[MAX_NPORTS];
 	u8 chan_map[NCHAN];                   /* channel -> port map */
 
+	unsigned int l2t_start;
+	unsigned int l2t_end;
 	struct l2t_data *l2t;
 	void *uld_handle[CXGB4_ULD_MAX];
 	struct list_head list_node;
@@ -683,7 +688,9 @@ int t4_restart_aneg(struct adapter *adap, unsigned int mbox, unsigned int port);
 int t4_memory_write(struct adapter *adap, int mtype, u32 addr, u32 len,
 		    __be32 *buf);
 int t4_seeprom_wp(struct adapter *adapter, bool enable);
+int get_vpd_params(struct adapter *adapter, struct vpd_params *p);
 int t4_load_fw(struct adapter *adapter, const u8 *fw_data, unsigned int size);
+unsigned int t4_flash_cfg_addr(struct adapter *adapter);
 int t4_check_fw_version(struct adapter *adapter);
 int t4_prep_adapter(struct adapter *adapter);
 int t4_port_init(struct adapter *adap, int mbox, int pf, int vf);
@@ -698,6 +705,8 @@ int t4_edc_read(struct adapter *adap, int idx, u32 addr, __be32 *data,
 
 void t4_get_port_stats(struct adapter *adap, int idx, struct port_stats *p);
 void t4_read_mtu_tbl(struct adapter *adap, u16 *mtus, u8 *mtu_log);
+void t4_tp_wr_bits_indirect(struct adapter *adap, unsigned int addr,
+			    unsigned int mask, unsigned int val);
 void t4_tp_get_tcp_stats(struct adapter *adap, struct tp_tcp_stats *v4,
 			 struct tp_tcp_stats *v6);
 void t4_load_mtus(struct adapter *adap, const unsigned short *mtus,
@@ -713,6 +722,12 @@ int t4_fw_hello(struct adapter *adap, unsigned int mbox, unsigned int evt_mbox,
 int t4_fw_bye(struct adapter *adap, unsigned int mbox);
 int t4_early_init(struct adapter *adap, unsigned int mbox);
 int t4_fw_reset(struct adapter *adap, unsigned int mbox, int reset);
+int t4_fw_config_file(struct adapter *adap, unsigned int mbox,
+		      unsigned int mtype, unsigned int maddr,
+		      u32 *finiver, u32 *finicsum, u32 *cfcsum);
+int t4_fixup_host_params(struct adapter *adap, unsigned int page_size,
+			  unsigned int cache_line_size);
+int t4_fw_initialize(struct adapter *adap, unsigned int mbox);
 int t4_query_params(struct adapter *adap, unsigned int mbox, unsigned int pf,
 		    unsigned int vf, unsigned int nparams, const u32 *params,
 		    u32 *val);
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 34d510dd56a8..cb3e663c30dc 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -193,6 +193,7 @@ static DEFINE_PCI_DEVICE_TABLE(cxgb4_pci_tbl) = {
 };
 
 #define FW_FNAME "cxgb4/t4fw.bin"
+#define FW_CFNAME "cxgb4/t4-config.txt"
 
 MODULE_DESCRIPTION(DRV_DESC);
 MODULE_AUTHOR("Chelsio Communications");
@@ -201,6 +202,17 @@ MODULE_VERSION(DRV_VERSION);
 MODULE_DEVICE_TABLE(pci, cxgb4_pci_tbl);
 MODULE_FIRMWARE(FW_FNAME);
 
+/*
+ * Normally we're willing to become the firmware's Master PF but will be happy
+ * if another PF has already become the Master and initialized the adapter.
+ * Setting "force_init" will cause this driver to forcibly establish itself as
+ * the Master PF and initialize the adapter.
+ */
+static uint force_init;
+
+module_param(force_init, uint, 0644);
+MODULE_PARM_DESC(force_init, "Forcibly become Master PF and initialize adapter");
+
 static int dflt_msg_enable = DFLT_MSG_ENABLE;
 
 module_param(dflt_msg_enable, int, 0644);
@@ -236,6 +248,20 @@ module_param_array(intr_cnt, uint, NULL, 0644);
 MODULE_PARM_DESC(intr_cnt,
 		 "thresholds 1..3 for queue interrupt packet counters");
 
+/*
+ * Normally we tell the chip to deliver Ingress Packets into our DMA buffers
+ * offset by 2 bytes in order to have the IP headers line up on 4-byte
+ * boundaries.  This is a requirement for many architectures which will throw
+ * a machine check fault if an attempt is made to access one of the 4-byte IP
+ * header fields on a non-4-byte boundary.  And it's a major performance issue
+ * even on some architectures which allow it like some implementations of the
+ * x86 ISA.  However, some architectures don't mind this and for some very
+ * edge-case performance sensitive applications (like forwarding large volumes
+ * of small packets), setting this DMA offset to 0 will decrease the number of
+ * PCI-E Bus transfers enough to measurably affect performance.
+ */
+static int rx_dma_offset = 2;
+
 static bool vf_acls;
 
 #ifdef CONFIG_PCI_IOV
@@ -3076,6 +3102,10 @@ static void setup_memwin(struct adapter *adap)
 	t4_write_reg(adap, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 2),
 		     (bar0 + MEMWIN2_BASE) | BIR(0) |
 		     WINDOW(ilog2(MEMWIN2_APERTURE) - 10));
+}
+
+static void setup_memwin_rdma(struct adapter *adap)
+{
 	if (adap->vres.ocq.size) {
 		unsigned int start, sz_kb;
 
@@ -3155,6 +3185,232 @@ static int adap_init1(struct adapter *adap, struct fw_caps_config_cmd *c)
 
 /*
  * Phase 0 of initialization: contact FW, obtain config, perform basic init.
+ *
+ * If the firmware we're dealing with has Configuration File support, then
+ * we use that to perform all configuration
+ */
+
+/*
+ * Tweak configuration based on module parameters, etc.  Most of these have
+ * defaults assigned to them by Firmware Configuration Files (if we're using
+ * them) but need to be explicitly set if we're using hard-coded
+ * initialization.  But even in the case of using Firmware Configuration
+ * Files, we'd like to expose the ability to change these via module
+ * parameters so these are essentially common tweaks/settings for
+ * Configuration Files and hard-coded initialization ...
+ */
+static int adap_init0_tweaks(struct adapter *adapter)
+{
+	/*
+	 * Fix up various Host-Dependent Parameters like Page Size, Cache
+	 * Line Size, etc.  The firmware default is for a 4KB Page Size and
+	 * 64B Cache Line Size ...
+	 */
+	t4_fixup_host_params(adapter, PAGE_SIZE, L1_CACHE_BYTES);
+
+	/*
+	 * Process module parameters which affect early initialization.
+	 */
+	if (rx_dma_offset != 2 && rx_dma_offset != 0) {
+		dev_err(&adapter->pdev->dev,
+			"Ignoring illegal rx_dma_offset=%d, using 2\n",
+			rx_dma_offset);
+		rx_dma_offset = 2;
+	}
+	t4_set_reg_field(adapter, SGE_CONTROL,
+			 PKTSHIFT_MASK,
+			 PKTSHIFT(rx_dma_offset));
+
+	/*
+	 * Don't include the "IP Pseudo Header" in CPL_RX_PKT checksums: Linux
+	 * adds the pseudo header itself.
+	 */
+	t4_tp_wr_bits_indirect(adapter, TP_INGRESS_CONFIG,
+			       CSUM_HAS_PSEUDO_HDR, 0);
+
+	return 0;
+}
+
+/*
+ * Attempt to initialize the adapter via a Firmware Configuration File.
+ */
+static int adap_init0_config(struct adapter *adapter, int reset)
+{
+	struct fw_caps_config_cmd caps_cmd;
+	const struct firmware *cf;
+	unsigned long mtype = 0, maddr = 0;
+	u32 finiver, finicsum, cfcsum;
+	int ret, using_flash;
+
+	/*
+	 * Reset device if necessary.
+	 */
+	if (reset) {
+		ret = t4_fw_reset(adapter, adapter->mbox,
+				  PIORSTMODE | PIORST);
+		if (ret < 0)
+			goto bye;
+	}
+
+	/*
+	 * If we have a T4 configuration file under /lib/firmware/cxgb4/,
+	 * then use that.  Otherwise, use the configuration file stored
+	 * in the adapter flash ...
+	 */
+	ret = request_firmware(&cf, FW_CFNAME, adapter->pdev_dev);
+	if (ret < 0) {
+		using_flash = 1;
+		mtype = FW_MEMTYPE_CF_FLASH;
+		maddr = t4_flash_cfg_addr(adapter);
+	} else {
+		u32 params[7], val[7];
+
+		using_flash = 0;
+		if (cf->size >= FLASH_CFG_MAX_SIZE)
+			ret = -ENOMEM;
+		else {
+			params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
+			     FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CF));
+			ret = t4_query_params(adapter, adapter->mbox,
+					      adapter->fn, 0, 1, params, val);
+			if (ret == 0) {
+				/*
+				 * For t4_memory_write() below addresses and
+				 * sizes have to be in terms of multiples of 4
+				 * bytes.  So, if the Configuration File isn't
+				 * a multiple of 4 bytes in length we'll have
+				 * to write that out separately since we can't
+				 * guarantee that the bytes following the
+				 * residual byte in the buffer returned by
+				 * request_firmware() are zeroed out ...
+				 */
+				size_t resid = cf->size & 0x3;
+				size_t size = cf->size & ~0x3;
+				__be32 *data = (__be32 *)cf->data;
+
+				mtype = FW_PARAMS_PARAM_Y_GET(val[0]);
+				maddr = FW_PARAMS_PARAM_Z_GET(val[0]) << 16;
+
+				ret = t4_memory_write(adapter, mtype, maddr,
+						      size, data);
+				if (ret == 0 && resid != 0) {
+					union {
+						__be32 word;
+						char buf[4];
+					} last;
+					int i;
+
+					last.word = data[size >> 2];
+					for (i = resid; i < 4; i++)
+						last.buf[i] = 0;
+					ret = t4_memory_write(adapter, mtype,
+							      maddr + size,
+							      4, &last.word);
+				}
+			}
+		}
+
+		release_firmware(cf);
+		if (ret)
+			goto bye;
+	}
+
+	/*
+	 * Issue a Capability Configuration command to the firmware to get it
+	 * to parse the Configuration File.  We don't use t4_fw_config_file()
+	 * because we want the ability to modify various features after we've
+	 * processed the configuration file ...
+	 */
+	memset(&caps_cmd, 0, sizeof(caps_cmd));
+	caps_cmd.op_to_write =
+		htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
+		      FW_CMD_REQUEST |
+		      FW_CMD_READ);
+	caps_cmd.retval_len16 =
+		htonl(FW_CAPS_CONFIG_CMD_CFVALID |
+		      FW_CAPS_CONFIG_CMD_MEMTYPE_CF(mtype) |
+		      FW_CAPS_CONFIG_CMD_MEMADDR64K_CF(maddr >> 16) |
+		      FW_LEN16(caps_cmd));
+	ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd),
+			 &caps_cmd);
+	if (ret < 0)
+		goto bye;
+
+	finiver = ntohl(caps_cmd.finiver);
+	finicsum = ntohl(caps_cmd.finicsum);
+	cfcsum = ntohl(caps_cmd.cfcsum);
+	if (finicsum != cfcsum)
+		dev_warn(adapter->pdev_dev, "Configuration File checksum "\
+			 "mismatch: [fini] csum=%#x, computed csum=%#x\n",
+			 finicsum, cfcsum);
+
+	/*
+	 * If we're a pure NIC driver then disable all offloading facilities.
+	 * This will allow the firmware to optimize aspects of the hardware
+	 * configuration which will result in improved performance.
+	 */
+	caps_cmd.ofldcaps = 0;
+	caps_cmd.iscsicaps = 0;
+	caps_cmd.rdmacaps = 0;
+	caps_cmd.fcoecaps = 0;
+
+	/*
+	 * And now tell the firmware to use the configuration we just loaded.
+	 */
+	caps_cmd.op_to_write =
+		htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
+		      FW_CMD_REQUEST |
+		      FW_CMD_WRITE);
+	caps_cmd.retval_len16 = htonl(FW_LEN16(caps_cmd));
+	ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd),
+			 NULL);
+	if (ret < 0)
+		goto bye;
+
+	/*
+	 * Tweak configuration based on system architecture, module
+	 * parameters, etc.
+	 */
+	ret = adap_init0_tweaks(adapter);
+	if (ret < 0)
+		goto bye;
+
+	/*
+	 * And finally tell the firmware to initialize itself using the
+	 * parameters from the Configuration File.
+	 */
+	ret = t4_fw_initialize(adapter, adapter->mbox);
+	if (ret < 0)
+		goto bye;
+
+	/*
+	 * Return successfully and note that we're operating with parameters
+	 * not supplied by the driver, rather than from hard-wired
+	 * initialization constants burried in the driver.
+	 */
+	adapter->flags |= USING_SOFT_PARAMS;
+	dev_info(adapter->pdev_dev, "Successfully configured using Firmware "\
+		 "Configuration File %s, version %#x, computed checksum %#x\n",
+		 (using_flash
+		  ? "in device FLASH"
+		  : "/lib/firmware/" FW_CFNAME),
+		 finiver, cfcsum);
+	return 0;
+
+	/*
+	 * Something bad happened.  Return the error ...  (If the "error"
+	 * is that there's no Configuration File on the adapter we don't
+	 * want to issue a warning since this is fairly common.)
+	 */
+bye:
+	if (ret != -ENOENT)
+		dev_warn(adapter->pdev_dev, "Configuration file error %d\n",
+			 -ret);
+	return ret;
+}
+
+/*
+ * Phase 0 of initialization: contact FW, obtain config, perform basic init.
  */
 static int adap_init0(struct adapter *adap)
 {
@@ -3162,72 +3418,197 @@ static int adap_init0(struct adapter *adap)
 	u32 v, port_vec;
 	enum dev_state state;
 	u32 params[7], val[7];
-	struct fw_caps_config_cmd c;
+	int reset = 1, j;
 
-	ret = t4_check_fw_version(adap);
-	if (ret == -EINVAL || ret > 0) {
-		if (upgrade_fw(adap) >= 0)             /* recache FW version */
-			ret = t4_check_fw_version(adap);
-	}
-	if (ret < 0)
-		return ret;
-
-	/* contact FW, request master */
-	ret = t4_fw_hello(adap, adap->fn, adap->fn, MASTER_MUST, &state);
+	/*
+	 * Contact FW, advertising Master capability (and potentially forcing
+	 * ourselves as the Master PF if our module parameter force_init is
+	 * set).
+	 */
+	ret = t4_fw_hello(adap, adap->mbox, adap->fn,
+			  force_init ? MASTER_MUST : MASTER_MAY,
+			  &state);
 	if (ret < 0) {
 		dev_err(adap->pdev_dev, "could not connect to FW, error %d\n",
 			ret);
 		return ret;
 	}
+	if (ret == adap->mbox)
+		adap->flags |= MASTER_PF;
+	if (force_init && state == DEV_STATE_INIT)
+		state = DEV_STATE_UNINIT;
 
-	/* reset device */
-	ret = t4_fw_reset(adap, adap->fn, PIORSTMODE | PIORST);
-	if (ret < 0)
-		goto bye;
-
-	for (v = 0; v < SGE_NTIMERS - 1; v++)
-		adap->sge.timer_val[v] = min(intr_holdoff[v], MAX_SGE_TIMERVAL);
-	adap->sge.timer_val[SGE_NTIMERS - 1] = MAX_SGE_TIMERVAL;
-	adap->sge.counter_val[0] = 1;
-	for (v = 1; v < SGE_NCOUNTERS; v++)
-		adap->sge.counter_val[v] = min(intr_cnt[v - 1],
-					       THRESHOLD_3_MASK);
-#define FW_PARAM_DEV(param) \
-	(FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | \
-	 FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_##param))
+	/*
+	 * If we're the Master PF Driver and the device is uninitialized,
+	 * then let's consider upgrading the firmware ...  (We always want
+	 * to check the firmware version number in order to A. get it for
+	 * later reporting and B. to warn if the currently loaded firmware
+	 * is excessively mismatched relative to the driver.)
+	 */
+	ret = t4_check_fw_version(adap);
+	if ((adap->flags & MASTER_PF) && state != DEV_STATE_INIT) {
+		if (ret == -EINVAL || ret > 0) {
+			if (upgrade_fw(adap) >= 0) {
+				/*
+				 * Note that the chip was reset as part of the
+				 * firmware upgrade so we don't reset it again
+				 * below and grab the new firmware version.
+				 */
+				reset = 0;
+				ret = t4_check_fw_version(adap);
+			}
+		}
+		if (ret < 0)
+			return ret;
+	}
 
-	params[0] = FW_PARAM_DEV(CCLK);
-	ret = t4_query_params(adap, adap->fn, adap->fn, 0, 1, params, val);
+	/*
+	 * Grab VPD parameters.  This should be done after we establish a
+	 * connection to the firmware since some of the VPD parameters
+	 * (notably the Core Clock frequency) are retrieved via requests to
+	 * the firmware.  On the other hand, we need these fairly early on
+	 * so we do this right after getting ahold of the firmware.
+	 */
+	ret = get_vpd_params(adap, &adap->params.vpd);
 	if (ret < 0)
 		goto bye;
-	adap->params.vpd.cclk = val[0];
 
-	ret = adap_init1(adap, &c);
+	/*
+	 * Find out what ports are available to us.
+	 */
+	v =
+	    FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
+	    FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_PORTVEC);
+	ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 1, &v, &port_vec);
 	if (ret < 0)
 		goto bye;
 
+	adap->params.nports = hweight32(port_vec);
+	adap->params.portvec = port_vec;
+
+	/*
+	 * If the firmware is initialized already (and we're not forcing a
+	 * master initialization), note that we're living with existing
+	 * adapter parameters.  Otherwise, it's time to try initializing the
+	 * adapter ...
+	 */
+	if (state == DEV_STATE_INIT) {
+		dev_info(adap->pdev_dev, "Coming up as %s: "\
+			 "Adapter already initialized\n",
+			 adap->flags & MASTER_PF ? "MASTER" : "SLAVE");
+		adap->flags |= USING_SOFT_PARAMS;
+	} else {
+		dev_info(adap->pdev_dev, "Coming up as MASTER: "\
+			 "Initializing adapter\n");
+		/*
+		 * Find out whether we're dealing with a version of
+		 * the firmware which has configuration file support.
+		 */
+		params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
+			     FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CF));
+		ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 1,
+				      params, val);
+
+		/*
+		 * If the firmware doesn't support Configuration
+		 * Files warn user and exit,
+		 */
+		if (ret < 0)
+			dev_warn(adap->pdev_dev, "Firmware doesn't support "\
+				 "configuration file.\n");
+		else {
+			/*
+			 * The firmware provides us with a memory
+			 * buffer where we can load a Configuration
+			 * File from the host if we want to override
+			 * the Configuration File in flash.
+			 */
+
+			ret = adap_init0_config(adap, reset);
+			if (ret == -ENOENT) {
+				dev_info(adap->pdev_dev,
+				    "No Configuration File present "
+				    "on adapter.\n");
+			}
+		}
+		if (ret < 0) {
+			dev_err(adap->pdev_dev,
+				"could not initialize adapter, error %d\n",
+				-ret);
+			goto bye;
+		}
+	}
+
+	/*
+	 * If we're living with non-hard-coded parameters (either from a
+	 * Firmware Configuration File or values programmed by a different PF
+	 * Driver), give the SGE code a chance to pull in anything that it
+	 * needs ...  Note that this must be called after we retrieve our VPD
+	 * parameters in order to know how to convert core ticks to seconds.
+	 */
+	if (adap->flags & USING_SOFT_PARAMS) {
+		ret = t4_sge_init(adap);
+		if (ret < 0)
+			goto bye;
+	}
+
+	/*
+	 * Grab some of our basic fundamental operating parameters.
+	 */
+#define FW_PARAM_DEV(param) \
+	(FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | \
+	FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_##param))
+
 #define FW_PARAM_PFVF(param) \
-	(FW_PARAMS_MNEM(FW_PARAMS_MNEM_PFVF) | \
-	 FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_PFVF_##param) | \
-	 FW_PARAMS_PARAM_Y(adap->fn))
+	FW_PARAMS_MNEM(FW_PARAMS_MNEM_PFVF) | \
+	FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_PFVF_##param)|  \
+	FW_PARAMS_PARAM_Y(0) | \
+	FW_PARAMS_PARAM_Z(0)
 
-	params[0] = FW_PARAM_DEV(PORTVEC);
+	params[0] = FW_PARAM_PFVF(EQ_START);
 	params[1] = FW_PARAM_PFVF(L2T_START);
 	params[2] = FW_PARAM_PFVF(L2T_END);
 	params[3] = FW_PARAM_PFVF(FILTER_START);
 	params[4] = FW_PARAM_PFVF(FILTER_END);
 	params[5] = FW_PARAM_PFVF(IQFLINT_START);
-	params[6] = FW_PARAM_PFVF(EQ_START);
-	ret = t4_query_params(adap, adap->fn, adap->fn, 0, 7, params, val);
+	ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 6, params, val);
 	if (ret < 0)
 		goto bye;
-	port_vec = val[0];
+	adap->sge.egr_start = val[0];
+	adap->l2t_start = val[1];
+	adap->l2t_end = val[2];
 	adap->tids.ftid_base = val[3];
 	adap->tids.nftids = val[4] - val[3] + 1;
 	adap->sge.ingr_start = val[5];
-	adap->sge.egr_start = val[6];
 
-	if (c.ofldcaps) {
+	/* query params related to active filter region */
+	params[0] = FW_PARAM_PFVF(ACTIVE_FILTER_START);
+	params[1] = FW_PARAM_PFVF(ACTIVE_FILTER_END);
+	ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2, params, val);
+	/* If Active filter size is set we enable establishing
+	 * offload connection through firmware work request
+	 */
+	if ((val[0] != val[1]) && (ret >= 0)) {
+		adap->flags |= FW_OFLD_CONN;
+		adap->tids.aftid_base = val[0];
+		adap->tids.aftid_end = val[1];
+	}
+
+#ifdef CONFIG_CHELSIO_T4_OFFLOAD
+	/*
+	 * Get device capabilities so we can determine what resources we need
+	 * to manage.
+	 */
+	memset(&caps_cmd, 0, sizeof(caps_cmd));
+	caps_cmd.op_to_write = htonl(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
+				     F_FW_CMD_REQUEST | F_FW_CMD_READ);
+	caps_cmd.cfvalid_to_len16 = htonl(FW_LEN16(caps_cmd));
+	ret = t4_wr_mbox(adap, adap->mbox, &caps_cmd, sizeof(caps_cmd),
+			 &caps_cmd);
+	if (ret < 0)
+		goto bye;
+
+	if (caps_cmd.toecaps) {
 		/* query offload-related parameters */
 		params[0] = FW_PARAM_DEV(NTID);
 		params[1] = FW_PARAM_PFVF(SERVER_START);
@@ -3235,28 +3616,55 @@ static int adap_init0(struct adapter *adap)
 		params[3] = FW_PARAM_PFVF(TDDP_START);
 		params[4] = FW_PARAM_PFVF(TDDP_END);
 		params[5] = FW_PARAM_DEV(FLOWC_BUFFIFO_SZ);
-		ret = t4_query_params(adap, adap->fn, adap->fn, 0, 6, params,
-				      val);
+		ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 6,
+				      params, val);
 		if (ret < 0)
 			goto bye;
 		adap->tids.ntids = val[0];
 		adap->tids.natids = min(adap->tids.ntids / 2, MAX_ATIDS);
 		adap->tids.stid_base = val[1];
 		adap->tids.nstids = val[2] - val[1] + 1;
+		/*
+		 * Setup server filter region. Divide the availble filter
+		 * region into two parts. Regular filters get 1/3rd and server
+		 * filters get 2/3rd part. This is only enabled if workarond
+		 * path is enabled.
+		 * 1. For regular filters.
+		 * 2. Server filter: This are special filters which are used
+		 * to redirect SYN packets to offload queue.
+		 */
+		if (adap->flags & FW_OFLD_CONN && !is_bypass(adap)) {
+			adap->tids.sftid_base = adap->tids.ftid_base +
+					DIV_ROUND_UP(adap->tids.nftids, 3);
+			adap->tids.nsftids = adap->tids.nftids -
+					 DIV_ROUND_UP(adap->tids.nftids, 3);
+			adap->tids.nftids = adap->tids.sftid_base -
+						adap->tids.ftid_base;
+		}
 		adap->vres.ddp.start = val[3];
 		adap->vres.ddp.size = val[4] - val[3] + 1;
 		adap->params.ofldq_wr_cred = val[5];
+
+		params[0] = FW_PARAM_PFVF(ETHOFLD_START);
+		params[1] = FW_PARAM_PFVF(ETHOFLD_END);
+		ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2,
+				      params, val);
+		if ((val[0] != val[1]) && (ret >= 0)) {
+			adap->tids.uotid_base = val[0];
+			adap->tids.nuotids = val[1] - val[0] + 1;
+		}
+
 		adap->params.offload = 1;
 	}
-	if (c.rdmacaps) {
+	if (caps_cmd.rdmacaps) {
 		params[0] = FW_PARAM_PFVF(STAG_START);
 		params[1] = FW_PARAM_PFVF(STAG_END);
 		params[2] = FW_PARAM_PFVF(RQ_START);
 		params[3] = FW_PARAM_PFVF(RQ_END);
 		params[4] = FW_PARAM_PFVF(PBL_START);
 		params[5] = FW_PARAM_PFVF(PBL_END);
-		ret = t4_query_params(adap, adap->fn, adap->fn, 0, 6, params,
-				      val);
+		ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 6,
+				      params, val);
 		if (ret < 0)
 			goto bye;
 		adap->vres.stag.start = val[0];
@@ -3272,8 +3680,7 @@ static int adap_init0(struct adapter *adap)
 		params[3] = FW_PARAM_PFVF(CQ_END);
 		params[4] = FW_PARAM_PFVF(OCQ_START);
 		params[5] = FW_PARAM_PFVF(OCQ_END);
-		ret = t4_query_params(adap, adap->fn, adap->fn, 0, 6, params,
-				      val);
+		ret = t4_query_params(adap, 0, 0, 0, 6, params, val);
 		if (ret < 0)
 			goto bye;
 		adap->vres.qp.start = val[0];
@@ -3283,11 +3690,11 @@ static int adap_init0(struct adapter *adap)
 		adap->vres.ocq.start = val[4];
 		adap->vres.ocq.size = val[5] - val[4] + 1;
 	}
-	if (c.iscsicaps) {
+	if (caps_cmd.iscsicaps) {
 		params[0] = FW_PARAM_PFVF(ISCSI_START);
 		params[1] = FW_PARAM_PFVF(ISCSI_END);
-		ret = t4_query_params(adap, adap->fn, adap->fn, 0, 2, params,
-				      val);
+		ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2,
+				      params, val);
 		if (ret < 0)
 			goto bye;
 		adap->vres.iscsi.start = val[0];
@@ -3295,63 +3702,33 @@ static int adap_init0(struct adapter *adap)
 	}
 #undef FW_PARAM_PFVF
 #undef FW_PARAM_DEV
+#endif /* CONFIG_CHELSIO_T4_OFFLOAD */
 
-	adap->params.nports = hweight32(port_vec);
-	adap->params.portvec = port_vec;
-	adap->flags |= FW_OK;
-
-	/* These are finalized by FW initialization, load their values now */
+	/*
+	 * These are finalized by FW initialization, load their values now.
+	 */
 	v = t4_read_reg(adap, TP_TIMER_RESOLUTION);
 	adap->params.tp.tre = TIMERRESOLUTION_GET(v);
+	adap->params.tp.dack_re = DELAYEDACKRESOLUTION_GET(v);
 	t4_read_mtu_tbl(adap, adap->params.mtus, NULL);
 	t4_load_mtus(adap, adap->params.mtus, adap->params.a_wnd,
 		     adap->params.b_wnd);
 
-#ifdef CONFIG_PCI_IOV
-	/*
-	 * Provision resource limits for Virtual Functions.  We currently
-	 * grant them all the same static resource limits except for the Port
-	 * Access Rights Mask which we're assigning based on the PF.  All of
-	 * the static provisioning stuff for both the PF and VF really needs
-	 * to be managed in a persistent manner for each device which the
-	 * firmware controls.
-	 */
-	{
-		int pf, vf;
-
-		for (pf = 0; pf < ARRAY_SIZE(num_vf); pf++) {
-			if (num_vf[pf] <= 0)
-				continue;
-
-			/* VF numbering starts at 1! */
-			for (vf = 1; vf <= num_vf[pf]; vf++) {
-				ret = t4_cfg_pfvf(adap, adap->fn, pf, vf,
-						  VFRES_NEQ, VFRES_NETHCTRL,
-						  VFRES_NIQFLINT, VFRES_NIQ,
-						  VFRES_TC, VFRES_NVI,
-						  FW_PFVF_CMD_CMASK_MASK,
-						  pfvfres_pmask(adap, pf, vf),
-						  VFRES_NEXACTF,
-						  VFRES_R_CAPS, VFRES_WX_CAPS);
-				if (ret < 0)
-					dev_warn(adap->pdev_dev, "failed to "
-						 "provision pf/vf=%d/%d; "
-						 "err=%d\n", pf, vf, ret);
-			}
-		}
-	}
-#endif
+	/* MODQ_REQ_MAP defaults to setting queues 0-3 to chan 0-3 */
+	for (j = 0; j < NCHAN; j++)
+		adap->params.tp.tx_modq[j] = j;
 
-	setup_memwin(adap);
+	adap->flags |= FW_OK;
 	return 0;
 
 	/*
-	 * If a command timed out or failed with EIO FW does not operate within
-	 * its spec or something catastrophic happened to HW/FW, stop issuing
-	 * commands.
+	 * Something bad happened.  If a command timed out or failed with EIO
+	 * FW does not operate within its spec or something catastrophic
+	 * happened to HW/FW, stop issuing commands.
 	 */
-bye:	if (ret != -ETIMEDOUT && ret != -EIO)
-		t4_fw_bye(adap, adap->fn);
+bye:
+	if (ret != -ETIMEDOUT && ret != -EIO)
+		t4_fw_bye(adap, adap->mbox);
 	return ret;
 }
 
@@ -3814,7 +4191,9 @@ static int __devinit init_one(struct pci_dev *pdev,
 	err = t4_prep_adapter(adapter);
 	if (err)
 		goto out_unmap_bar;
+	setup_memwin(adapter);
 	err = adap_init0(adapter);
+	setup_memwin_rdma(adapter);
 	if (err)
 		goto out_unmap_bar;
 
@@ -3956,8 +4335,11 @@ static void __devexit remove_one(struct pci_dev *pdev)
 {
 	struct adapter *adapter = pci_get_drvdata(pdev);
 
+#ifdef CONFIG_PCI_IOV
 	pci_disable_sriov(pdev);
 
+#endif
+
 	if (adapter) {
 		int i;
 
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h
index d79980c5fc63..1b899fea1a91 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h
@@ -100,6 +100,8 @@ struct tid_info {
 
 	unsigned int nftids;
 	unsigned int ftid_base;
+	unsigned int aftid_base;
+	unsigned int aftid_end;
 
 	spinlock_t atid_lock ____cacheline_aligned_in_smp;
 	union aopen_entry *afree;
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 259d0dcb0089..419432d42049 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -492,8 +492,9 @@ int t4_seeprom_wp(struct adapter *adapter, bool enable)
  *
  *	Reads card parameters stored in VPD EEPROM.
  */
-static int get_vpd_params(struct adapter *adapter, struct vpd_params *p)
+int get_vpd_params(struct adapter *adapter, struct vpd_params *p)
 {
+	u32 cclk_param, cclk_val;
 	int i, ret;
 	int ec, sn;
 	u8 vpd[VPD_LEN], csum;
@@ -555,6 +556,19 @@ static int get_vpd_params(struct adapter *adapter, struct vpd_params *p)
 	i = pci_vpd_info_field_size(vpd + sn - PCI_VPD_INFO_FLD_HDR_SIZE);
 	memcpy(p->sn, vpd + sn, min(i, SERNUM_LEN));
 	strim(p->sn);
+
+	/*
+	 * Ask firmware for the Core Clock since it knows how to translate the
+	 * Reference Clock ('V2') VPD field into a Core Clock value ...
+	 */
+	cclk_param = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
+		      FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CCLK));
+	ret = t4_query_params(adapter, adapter->mbox, 0, 0,
+			      1, &cclk_param, &cclk_val);
+	if (ret)
+		return ret;
+	p->cclk = cclk_val;
+
 	return 0;
 }
 
@@ -855,6 +869,77 @@ static int t4_flash_erase_sectors(struct adapter *adapter, int start, int end)
 }
 
 /**
+ *	t4_flash_cfg_addr - return the address of the flash configuration file
+ *	@adapter: the adapter
+ *
+ *	Return the address within the flash where the Firmware Configuration
+ *	File is stored.
+ */
+unsigned int t4_flash_cfg_addr(struct adapter *adapter)
+{
+	if (adapter->params.sf_size == 0x100000)
+		return FLASH_FPGA_CFG_START;
+	else
+		return FLASH_CFG_START;
+}
+
+/**
+ *	t4_load_cfg - download config file
+ *	@adap: the adapter
+ *	@cfg_data: the cfg text file to write
+ *	@size: text file size
+ *
+ *	Write the supplied config text file to the card's serial flash.
+ */
+int t4_load_cfg(struct adapter *adap, const u8 *cfg_data, unsigned int size)
+{
+	int ret, i, n;
+	unsigned int addr;
+	unsigned int flash_cfg_start_sec;
+	unsigned int sf_sec_size = adap->params.sf_size / adap->params.sf_nsec;
+
+	addr = t4_flash_cfg_addr(adap);
+	flash_cfg_start_sec = addr / SF_SEC_SIZE;
+
+	if (size > FLASH_CFG_MAX_SIZE) {
+		dev_err(adap->pdev_dev, "cfg file too large, max is %u bytes\n",
+			FLASH_CFG_MAX_SIZE);
+		return -EFBIG;
+	}
+
+	i = DIV_ROUND_UP(FLASH_CFG_MAX_SIZE,	/* # of sectors spanned */
+			 sf_sec_size);
+	ret = t4_flash_erase_sectors(adap, flash_cfg_start_sec,
+				     flash_cfg_start_sec + i - 1);
+	/*
+	 * If size == 0 then we're simply erasing the FLASH sectors associated
+	 * with the on-adapter Firmware Configuration File.
+	 */
+	if (ret || size == 0)
+		goto out;
+
+	/* this will write to the flash up to SF_PAGE_SIZE at a time */
+	for (i = 0; i < size; i += SF_PAGE_SIZE) {
+		if ((size - i) <  SF_PAGE_SIZE)
+			n = size - i;
+		else
+			n = SF_PAGE_SIZE;
+		ret = t4_write_flash(adap, addr, n, cfg_data);
+		if (ret)
+			goto out;
+
+		addr += SF_PAGE_SIZE;
+		cfg_data += SF_PAGE_SIZE;
+	}
+
+out:
+	if (ret)
+		dev_err(adap->pdev_dev, "config file %s failed %d\n",
+			(size == 0 ? "clear" : "download"), ret);
+	return ret;
+}
+
+/**
  *	t4_load_fw - download firmware
  *	@adap: the adapter
  *	@fw_data: the firmware image to write
@@ -1854,6 +1939,23 @@ void t4_read_mtu_tbl(struct adapter *adap, u16 *mtus, u8 *mtu_log)
 }
 
 /**
+ *	t4_tp_wr_bits_indirect - set/clear bits in an indirect TP register
+ *	@adap: the adapter
+ *	@addr: the indirect TP register address
+ *	@mask: specifies the field within the register to modify
+ *	@val: new value for the field
+ *
+ *	Sets a field of an indirect TP register to the given value.
+ */
+void t4_tp_wr_bits_indirect(struct adapter *adap, unsigned int addr,
+			    unsigned int mask, unsigned int val)
+{
+	t4_write_reg(adap, TP_PIO_ADDR, addr);
+	val |= t4_read_reg(adap, TP_PIO_DATA) & ~mask;
+	t4_write_reg(adap, TP_PIO_DATA, val);
+}
+
+/**
  *	init_cong_ctrl - initialize congestion control parameters
  *	@a: the alpha values for congestion control
  *	@b: the beta values for congestion control
@@ -2137,9 +2239,9 @@ int t4_fwaddrspace_write(struct adapter *adap, unsigned int mbox,
 	struct fw_ldst_cmd c;
 
 	memset(&c, 0, sizeof(c));
-	c.op_to_addrspace = htonl(V_FW_CMD_OP(FW_LDST_CMD) | F_FW_CMD_REQUEST |
-			    F_FW_CMD_WRITE |
-			    V_FW_LDST_CMD_ADDRSPACE(FW_LDST_ADDRSPC_FIRMWARE));
+	c.op_to_addrspace = htonl(FW_CMD_OP(FW_LDST_CMD) | FW_CMD_REQUEST |
+			    FW_CMD_WRITE |
+			    FW_LDST_CMD_ADDRSPACE(FW_LDST_ADDRSPC_FIRMWARE));
 	c.cycles_to_len16 = htonl(FW_LEN16(c));
 	c.u.addrval.addr = htonl(addr);
 	c.u.addrval.val = htonl(val);
@@ -2239,39 +2341,129 @@ int t4_mdio_wr(struct adapter *adap, unsigned int mbox, unsigned int phy_addr,
 }
 
 /**
- *	t4_fw_hello - establish communication with FW
- *	@adap: the adapter
- *	@mbox: mailbox to use for the FW command
- *	@evt_mbox: mailbox to receive async FW events
- *	@master: specifies the caller's willingness to be the device master
- *	@state: returns the current device state
+ *      t4_fw_hello - establish communication with FW
+ *      @adap: the adapter
+ *      @mbox: mailbox to use for the FW command
+ *      @evt_mbox: mailbox to receive async FW events
+ *      @master: specifies the caller's willingness to be the device master
+ *	@state: returns the current device state (if non-NULL)
  *
- *	Issues a command to establish communication with FW.
+ *	Issues a command to establish communication with FW.  Returns either
+ *	an error (negative integer) or the mailbox of the Master PF.
  */
 int t4_fw_hello(struct adapter *adap, unsigned int mbox, unsigned int evt_mbox,
 		enum dev_master master, enum dev_state *state)
 {
 	int ret;
 	struct fw_hello_cmd c;
+	u32 v;
+	unsigned int master_mbox;
+	int retries = FW_CMD_HELLO_RETRIES;
 
+retry:
+	memset(&c, 0, sizeof(c));
 	INIT_CMD(c, HELLO, WRITE);
 	c.err_to_mbasyncnot = htonl(
 		FW_HELLO_CMD_MASTERDIS(master == MASTER_CANT) |
 		FW_HELLO_CMD_MASTERFORCE(master == MASTER_MUST) |
-		FW_HELLO_CMD_MBMASTER(master == MASTER_MUST ? mbox : 0xff) |
-		FW_HELLO_CMD_MBASYNCNOT(evt_mbox));
+		FW_HELLO_CMD_MBMASTER(master == MASTER_MUST ? mbox :
+				      FW_HELLO_CMD_MBMASTER_MASK) |
+		FW_HELLO_CMD_MBASYNCNOT(evt_mbox) |
+		FW_HELLO_CMD_STAGE(fw_hello_cmd_stage_os) |
+		FW_HELLO_CMD_CLEARINIT);
 
+	/*
+	 * Issue the HELLO command to the firmware.  If it's not successful
+	 * but indicates that we got a "busy" or "timeout" condition, retry
+	 * the HELLO until we exhaust our retry limit.
+	 */
 	ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
-	if (ret == 0 && state) {
-		u32 v = ntohl(c.err_to_mbasyncnot);
-		if (v & FW_HELLO_CMD_INIT)
-			*state = DEV_STATE_INIT;
-		else if (v & FW_HELLO_CMD_ERR)
+	if (ret < 0) {
+		if ((ret == -EBUSY || ret == -ETIMEDOUT) && retries-- > 0)
+			goto retry;
+		return ret;
+	}
+
+	v = ntohl(c.err_to_mbasyncnot);
+	master_mbox = FW_HELLO_CMD_MBMASTER_GET(v);
+	if (state) {
+		if (v & FW_HELLO_CMD_ERR)
 			*state = DEV_STATE_ERR;
+		else if (v & FW_HELLO_CMD_INIT)
+			*state = DEV_STATE_INIT;
 		else
 			*state = DEV_STATE_UNINIT;
 	}
-	return ret;
+
+	/*
+	 * If we're not the Master PF then we need to wait around for the
+	 * Master PF Driver to finish setting up the adapter.
+	 *
+	 * Note that we also do this wait if we're a non-Master-capable PF and
+	 * there is no current Master PF; a Master PF may show up momentarily
+	 * and we wouldn't want to fail pointlessly.  (This can happen when an
+	 * OS loads lots of different drivers rapidly at the same time).  In
+	 * this case, the Master PF returned by the firmware will be
+	 * FW_PCIE_FW_MASTER_MASK so the test below will work ...
+	 */
+	if ((v & (FW_HELLO_CMD_ERR|FW_HELLO_CMD_INIT)) == 0 &&
+	    master_mbox != mbox) {
+		int waiting = FW_CMD_HELLO_TIMEOUT;
+
+		/*
+		 * Wait for the firmware to either indicate an error or
+		 * initialized state.  If we see either of these we bail out
+		 * and report the issue to the caller.  If we exhaust the
+		 * "hello timeout" and we haven't exhausted our retries, try
+		 * again.  Otherwise bail with a timeout error.
+		 */
+		for (;;) {
+			u32 pcie_fw;
+
+			msleep(50);
+			waiting -= 50;
+
+			/*
+			 * If neither Error nor Initialialized are indicated
+			 * by the firmware keep waiting till we exaust our
+			 * timeout ... and then retry if we haven't exhausted
+			 * our retries ...
+			 */
+			pcie_fw = t4_read_reg(adap, MA_PCIE_FW);
+			if (!(pcie_fw & (FW_PCIE_FW_ERR|FW_PCIE_FW_INIT))) {
+				if (waiting <= 0) {
+					if (retries-- > 0)
+						goto retry;
+
+					return -ETIMEDOUT;
+				}
+				continue;
+			}
+
+			/*
+			 * We either have an Error or Initialized condition
+			 * report errors preferentially.
+			 */
+			if (state) {
+				if (pcie_fw & FW_PCIE_FW_ERR)
+					*state = DEV_STATE_ERR;
+				else if (pcie_fw & FW_PCIE_FW_INIT)
+					*state = DEV_STATE_INIT;
+			}
+
+			/*
+			 * If we arrived before a Master PF was selected and
+			 * there's not a valid Master PF, grab its identity
+			 * for our caller.
+			 */
+			if (master_mbox == FW_PCIE_FW_MASTER_MASK &&
+			    (pcie_fw & FW_PCIE_FW_MASTER_VLD))
+				master_mbox = FW_PCIE_FW_MASTER_GET(pcie_fw);
+			break;
+		}
+	}
+
+	return master_mbox;
 }
 
 /**
@@ -2323,6 +2515,163 @@ int t4_fw_reset(struct adapter *adap, unsigned int mbox, int reset)
 }
 
 /**
+ *	t4_fw_config_file - setup an adapter via a Configuration File
+ *	@adap: the adapter
+ *	@mbox: mailbox to use for the FW command
+ *	@mtype: the memory type where the Configuration File is located
+ *	@maddr: the memory address where the Configuration File is located
+ *	@finiver: return value for CF [fini] version
+ *	@finicsum: return value for CF [fini] checksum
+ *	@cfcsum: return value for CF computed checksum
+ *
+ *	Issue a command to get the firmware to process the Configuration
+ *	File located at the specified mtype/maddress.  If the Configuration
+ *	File is processed successfully and return value pointers are
+ *	provided, the Configuration File "[fini] section version and
+ *	checksum values will be returned along with the computed checksum.
+ *	It's up to the caller to decide how it wants to respond to the
+ *	checksums not matching but it recommended that a prominant warning
+ *	be emitted in order to help people rapidly identify changed or
+ *	corrupted Configuration Files.
+ *
+ *	Also note that it's possible to modify things like "niccaps",
+ *	"toecaps",etc. between processing the Configuration File and telling
+ *	the firmware to use the new configuration.  Callers which want to
+ *	do this will need to "hand-roll" their own CAPS_CONFIGS commands for
+ *	Configuration Files if they want to do this.
+ */
+int t4_fw_config_file(struct adapter *adap, unsigned int mbox,
+		      unsigned int mtype, unsigned int maddr,
+		      u32 *finiver, u32 *finicsum, u32 *cfcsum)
+{
+	struct fw_caps_config_cmd caps_cmd;
+	int ret;
+
+	/*
+	 * Tell the firmware to process the indicated Configuration File.
+	 * If there are no errors and the caller has provided return value
+	 * pointers for the [fini] section version, checksum and computed
+	 * checksum, pass those back to the caller.
+	 */
+	memset(&caps_cmd, 0, sizeof(caps_cmd));
+	caps_cmd.op_to_write =
+		htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
+		      FW_CMD_REQUEST |
+		      FW_CMD_READ);
+	caps_cmd.retval_len16 =
+		htonl(FW_CAPS_CONFIG_CMD_CFVALID |
+		      FW_CAPS_CONFIG_CMD_MEMTYPE_CF(mtype) |
+		      FW_CAPS_CONFIG_CMD_MEMADDR64K_CF(maddr >> 16) |
+		      FW_LEN16(caps_cmd));
+	ret = t4_wr_mbox(adap, mbox, &caps_cmd, sizeof(caps_cmd), &caps_cmd);
+	if (ret < 0)
+		return ret;
+
+	if (finiver)
+		*finiver = ntohl(caps_cmd.finiver);
+	if (finicsum)
+		*finicsum = ntohl(caps_cmd.finicsum);
+	if (cfcsum)
+		*cfcsum = ntohl(caps_cmd.cfcsum);
+
+	/*
+	 * And now tell the firmware to use the configuration we just loaded.
+	 */
+	caps_cmd.op_to_write =
+		htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
+		      FW_CMD_REQUEST |
+		      FW_CMD_WRITE);
+	caps_cmd.retval_len16 = htonl(FW_LEN16(caps_cmd));
+	return t4_wr_mbox(adap, mbox, &caps_cmd, sizeof(caps_cmd), NULL);
+}
+
+/**
+ *	t4_fixup_host_params - fix up host-dependent parameters
+ *	@adap: the adapter
+ *	@page_size: the host's Base Page Size
+ *	@cache_line_size: the host's Cache Line Size
+ *
+ *	Various registers in T4 contain values which are dependent on the
+ *	host's Base Page and Cache Line Sizes.  This function will fix all of
+ *	those registers with the appropriate values as passed in ...
+ */
+int t4_fixup_host_params(struct adapter *adap, unsigned int page_size,
+			 unsigned int cache_line_size)
+{
+	unsigned int page_shift = fls(page_size) - 1;
+	unsigned int sge_hps = page_shift - 10;
+	unsigned int stat_len = cache_line_size > 64 ? 128 : 64;
+	unsigned int fl_align = cache_line_size < 32 ? 32 : cache_line_size;
+	unsigned int fl_align_log = fls(fl_align) - 1;
+
+	t4_write_reg(adap, SGE_HOST_PAGE_SIZE,
+		     HOSTPAGESIZEPF0(sge_hps) |
+		     HOSTPAGESIZEPF1(sge_hps) |
+		     HOSTPAGESIZEPF2(sge_hps) |
+		     HOSTPAGESIZEPF3(sge_hps) |
+		     HOSTPAGESIZEPF4(sge_hps) |
+		     HOSTPAGESIZEPF5(sge_hps) |
+		     HOSTPAGESIZEPF6(sge_hps) |
+		     HOSTPAGESIZEPF7(sge_hps));
+
+	t4_set_reg_field(adap, SGE_CONTROL,
+			 INGPADBOUNDARY(INGPADBOUNDARY_MASK) |
+			 EGRSTATUSPAGESIZE_MASK,
+			 INGPADBOUNDARY(fl_align_log - 5) |
+			 EGRSTATUSPAGESIZE(stat_len != 64));
+
+	/*
+	 * Adjust various SGE Free List Host Buffer Sizes.
+	 *
+	 * This is something of a crock since we're using fixed indices into
+	 * the array which are also known by the sge.c code and the T4
+	 * Firmware Configuration File.  We need to come up with a much better
+	 * approach to managing this array.  For now, the first four entries
+	 * are:
+	 *
+	 *   0: Host Page Size
+	 *   1: 64KB
+	 *   2: Buffer size corresponding to 1500 byte MTU (unpacked mode)
+	 *   3: Buffer size corresponding to 9000 byte MTU (unpacked mode)
+	 *
+	 * For the single-MTU buffers in unpacked mode we need to include
+	 * space for the SGE Control Packet Shift, 14 byte Ethernet header,
+	 * possible 4 byte VLAN tag, all rounded up to the next Ingress Packet
+	 * Padding boundry.  All of these are accommodated in the Factory
+	 * Default Firmware Configuration File but we need to adjust it for
+	 * this host's cache line size.
+	 */
+	t4_write_reg(adap, SGE_FL_BUFFER_SIZE0, page_size);
+	t4_write_reg(adap, SGE_FL_BUFFER_SIZE2,
+		     (t4_read_reg(adap, SGE_FL_BUFFER_SIZE2) + fl_align-1)
+		     & ~(fl_align-1));
+	t4_write_reg(adap, SGE_FL_BUFFER_SIZE3,
+		     (t4_read_reg(adap, SGE_FL_BUFFER_SIZE3) + fl_align-1)
+		     & ~(fl_align-1));
+
+	t4_write_reg(adap, ULP_RX_TDDP_PSZ, HPZ0(page_shift - 12));
+
+	return 0;
+}
+
+/**
+ *	t4_fw_initialize - ask FW to initialize the device
+ *	@adap: the adapter
+ *	@mbox: mailbox to use for the FW command
+ *
+ *	Issues a command to FW to partially initialize the device.  This
+ *	performs initialization that generally doesn't depend on user input.
+ */
+int t4_fw_initialize(struct adapter *adap, unsigned int mbox)
+{
+	struct fw_initialize_cmd c;
+
+	memset(&c, 0, sizeof(c));
+	INIT_CMD(c, INITIALIZE, WRITE);
+	return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
+}
+
+/**
  *	t4_query_params - query FW or device parameters
  *	@adap: the adapter
  *	@mbox: mailbox to use for the FW command
@@ -2974,10 +3323,6 @@ int __devinit t4_prep_adapter(struct adapter *adapter)
 		return ret;
 	}
 
-	ret = get_vpd_params(adapter, &adapter->params.vpd);
-	if (ret < 0)
-		return ret;
-
 	init_cong_ctrl(adapter->params.a_wnd, adapter->params.b_wnd);
 
 	/*
@@ -2985,6 +3330,7 @@ int __devinit t4_prep_adapter(struct adapter *adapter)
 	 */
 	adapter->params.nports = 1;
 	adapter->params.portvec = 1;
+	adapter->params.vpd.cclk = 50000;
 	return 0;
 }
 
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
index 2767ca6dbe99..779b23f8f591 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
@@ -115,6 +115,35 @@
 #define  GLOBALENABLE           0x00000001U
 
 #define SGE_HOST_PAGE_SIZE 0x100c
+
+#define  HOSTPAGESIZEPF7_MASK   0x0000000fU
+#define  HOSTPAGESIZEPF7_SHIFT  28
+#define  HOSTPAGESIZEPF7(x)     ((x) << HOSTPAGESIZEPF7_SHIFT)
+
+#define  HOSTPAGESIZEPF6_MASK   0x0000000fU
+#define  HOSTPAGESIZEPF6_SHIFT  24
+#define  HOSTPAGESIZEPF6(x)     ((x) << HOSTPAGESIZEPF6_SHIFT)
+
+#define  HOSTPAGESIZEPF5_MASK   0x0000000fU
+#define  HOSTPAGESIZEPF5_SHIFT  20
+#define  HOSTPAGESIZEPF5(x)     ((x) << HOSTPAGESIZEPF5_SHIFT)
+
+#define  HOSTPAGESIZEPF4_MASK   0x0000000fU
+#define  HOSTPAGESIZEPF4_SHIFT  16
+#define  HOSTPAGESIZEPF4(x)     ((x) << HOSTPAGESIZEPF4_SHIFT)
+
+#define  HOSTPAGESIZEPF3_MASK   0x0000000fU
+#define  HOSTPAGESIZEPF3_SHIFT  12
+#define  HOSTPAGESIZEPF3(x)     ((x) << HOSTPAGESIZEPF3_SHIFT)
+
+#define  HOSTPAGESIZEPF2_MASK   0x0000000fU
+#define  HOSTPAGESIZEPF2_SHIFT  8
+#define  HOSTPAGESIZEPF2(x)     ((x) << HOSTPAGESIZEPF2_SHIFT)
+
+#define  HOSTPAGESIZEPF1_MASK   0x0000000fU
+#define  HOSTPAGESIZEPF1_SHIFT  4
+#define  HOSTPAGESIZEPF1(x)     ((x) << HOSTPAGESIZEPF1_SHIFT)
+
 #define  HOSTPAGESIZEPF0_MASK   0x0000000fU
 #define  HOSTPAGESIZEPF0_SHIFT  0
 #define  HOSTPAGESIZEPF0(x)     ((x) << HOSTPAGESIZEPF0_SHIFT)
@@ -162,6 +191,8 @@
 #define SGE_INT_ENABLE3 0x1040
 #define SGE_FL_BUFFER_SIZE0 0x1044
 #define SGE_FL_BUFFER_SIZE1 0x1048
+#define SGE_FL_BUFFER_SIZE2 0x104c
+#define SGE_FL_BUFFER_SIZE3 0x1050
 #define SGE_INGRESS_RX_THRESHOLD 0x10a0
 #define  THRESHOLD_0_MASK   0x3f000000U
 #define  THRESHOLD_0_SHIFT  24
@@ -367,7 +398,7 @@
 #define  MEM_WRAP_CLIENT_NUM_MASK   0x0000000fU
 #define  MEM_WRAP_CLIENT_NUM_SHIFT  0
 #define  MEM_WRAP_CLIENT_NUM_GET(x) (((x) & MEM_WRAP_CLIENT_NUM_MASK) >> MEM_WRAP_CLIENT_NUM_SHIFT)
-
+#define MA_PCIE_FW 0x30b8
 #define MA_PARITY_ERROR_STATUS 0x77f4
 
 #define EDC_0_BASE_ADDR 0x7900
@@ -469,6 +500,10 @@
 #define  TIMERRESOLUTION_MASK   0x00ff0000U
 #define  TIMERRESOLUTION_SHIFT  16
 #define  TIMERRESOLUTION_GET(x) (((x) & TIMERRESOLUTION_MASK) >> TIMERRESOLUTION_SHIFT)
+#define  DELAYEDACKRESOLUTION_MASK 0x000000ffU
+#define  DELAYEDACKRESOLUTION_SHIFT     0
+#define  DELAYEDACKRESOLUTION_GET(x) \
+	(((x) & DELAYEDACKRESOLUTION_MASK) >> DELAYEDACKRESOLUTION_SHIFT)
 
 #define TP_SHIFT_CNT 0x7dc0
 
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
index 94e3484b7d93..3f85019106fa 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
@@ -155,6 +155,17 @@ struct fw_eth_tx_pkt_vm_wr {
 
 #define FW_CMD_MAX_TIMEOUT 3000
 
+/*
+ * If a host driver does a HELLO and discovers that there's already a MASTER
+ * selected, we may have to wait for that MASTER to finish issuing RESET,
+ * configuration and INITIALIZE commands.  Also, there's a possibility that
+ * our own HELLO may get lost if it happens right as the MASTER is issuign a
+ * RESET command, so we need to be willing to make a few retries of our HELLO.
+ */
+#define FW_CMD_HELLO_TIMEOUT	(3 * FW_CMD_MAX_TIMEOUT)
+#define FW_CMD_HELLO_RETRIES	3
+
+
 enum fw_cmd_opcodes {
 	FW_LDST_CMD                    = 0x01,
 	FW_RESET_CMD                   = 0x03,
@@ -307,6 +318,10 @@ struct fw_reset_cmd {
 	__be32 r3;
 };
 
+enum fw_hellow_cmd {
+	fw_hello_cmd_stage_os		= 0x0
+};
+
 struct fw_hello_cmd {
 	__be32 op_to_write;
 	__be32 retval_len16;
@@ -315,8 +330,14 @@ struct fw_hello_cmd {
 #define FW_HELLO_CMD_INIT	    (1U << 30)
 #define FW_HELLO_CMD_MASTERDIS(x)   ((x) << 29)
 #define FW_HELLO_CMD_MASTERFORCE(x) ((x) << 28)
-#define FW_HELLO_CMD_MBMASTER(x)    ((x) << 24)
+#define FW_HELLO_CMD_MBMASTER_MASK   0xfU
+#define FW_HELLO_CMD_MBMASTER_SHIFT  24
+#define FW_HELLO_CMD_MBMASTER(x)     ((x) << FW_HELLO_CMD_MBMASTER_SHIFT)
+#define FW_HELLO_CMD_MBMASTER_GET(x) \
+	(((x) >> FW_HELLO_CMD_MBMASTER_SHIFT) & FW_HELLO_CMD_MBMASTER_MASK)
 #define FW_HELLO_CMD_MBASYNCNOT(x)  ((x) << 20)
+#define FW_HELLO_CMD_STAGE(x)       ((x) << 17)
+#define FW_HELLO_CMD_CLEARINIT      (1U << 16)
 	__be32 fwrev;
 };
 
@@ -1654,18 +1675,4 @@ struct fw_hdr {
 #define FW_HDR_FW_VER_MICRO_GET(x) (((x) >> 8) & 0xff)
 #define FW_HDR_FW_VER_BUILD_GET(x) (((x) >> 0) & 0xff)
 
-#define S_FW_CMD_OP 24
-#define V_FW_CMD_OP(x) ((x) << S_FW_CMD_OP)
-
-#define S_FW_CMD_REQUEST 23
-#define V_FW_CMD_REQUEST(x) ((x) << S_FW_CMD_REQUEST)
-#define F_FW_CMD_REQUEST V_FW_CMD_REQUEST(1U)
-
-#define S_FW_CMD_WRITE 21
-#define V_FW_CMD_WRITE(x) ((x) << S_FW_CMD_WRITE)
-#define F_FW_CMD_WRITE V_FW_CMD_WRITE(1U)
-
-#define S_FW_LDST_CMD_ADDRSPACE 0
-#define V_FW_LDST_CMD_ADDRSPACE(x) ((x) << S_FW_LDST_CMD_ADDRSPACE)
-
 #endif /* _T4FW_INTERFACE_H_ */