V4L/DVB: Remove obsolete ovcamchip sensor framework

Only used by obsoleted v4l1 driver

Signed-off-by: Amerigo Wang <amwang@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

11 files changed, 0 insertions, 2403 deletions

diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index d4c98943547c..af1d0710bfb3 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -459,14 +459,6 @@ Who:	Corentin Chary <corentin.chary@gmail.com>
 
 ----------------------------
 
-What:	ovcamchip sensor framework
-When:	2.6.35
-Files:	drivers/media/video/ovcamchip/*
-Why:	Only used by obsoleted v4l1 drivers
-Who:	Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
 What:	stv680 v4l1 driver
 When:	2.6.35
 Files:	drivers/media/video/stv680.[ch]
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 60889593785c..bf47cdc95a71 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -1001,23 +1001,6 @@ source "drivers/media/video/usbvideo/Kconfig"
 
 source "drivers/media/video/et61x251/Kconfig"
 
-config VIDEO_OVCAMCHIP
-	tristate "OmniVision Camera Chip support (DEPRECATED)"
-	depends on I2C && VIDEO_V4L1
-	default n
-	---help---
-	  This driver is DEPRECATED please use the gspca ov519 module
-	  instead. Note that for the ov511 / ov518 support of the gspca module
-	  you need atleast version 0.6.0 of libv4l and for the w9968cf
-	  atleast version 0.6.3 of libv4l.
-
-	  Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
-	  This driver is intended to be used with the ov511 and w9968cf USB
-	  camera drivers.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called ovcamchip.
-
 config USB_SE401
 	tristate "USB SE401 Camera support"
 	depends on VIDEO_V4L1
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index bb702c921c7a..e3603b4ceeaa 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -105,7 +105,6 @@ obj-$(CONFIG_VIDEO_TLG2300) += tlg2300/
 obj-$(CONFIG_VIDEO_CX231XX) += cx231xx/
 obj-$(CONFIG_VIDEO_USBVISION) += usbvision/
 obj-$(CONFIG_VIDEO_PVRUSB2) += pvrusb2/
-obj-$(CONFIG_VIDEO_OVCAMCHIP) += ovcamchip/
 obj-$(CONFIG_VIDEO_CPIA2) += cpia2/
 obj-$(CONFIG_VIDEO_MXB) += mxb.o
 obj-$(CONFIG_VIDEO_HEXIUM_ORION) += hexium_orion.o
diff --git a/drivers/media/video/ovcamchip/Makefile b/drivers/media/video/ovcamchip/Makefile
deleted file mode 100644
index cba4cdf20f49..000000000000
--- a/drivers/media/video/ovcamchip/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-ovcamchip-objs     := ovcamchip_core.o ov6x20.o ov6x30.o ov7x10.o ov7x20.o \
-		      ov76be.o
-
-obj-$(CONFIG_VIDEO_OVCAMCHIP) += ovcamchip.o
diff --git a/drivers/media/video/ovcamchip/ov6x20.c b/drivers/media/video/ovcamchip/ov6x20.c
deleted file mode 100644
index c04130dab127..000000000000
--- a/drivers/media/video/ovcamchip/ov6x20.c
+++ /dev/null
@@ -1,414 +0,0 @@
-/* OmniVision OV6620/OV6120 Camera Chip Support Code
- *
- * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
- * http://alpha.dyndns.org/ov511/
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
- */
-
-#define DEBUG
-
-#include <linux/slab.h>
-#include "ovcamchip_priv.h"
-
-/* Registers */
-#define REG_GAIN		0x00	/* gain [5:0] */
-#define REG_BLUE		0x01	/* blue gain */
-#define REG_RED			0x02	/* red gain */
-#define REG_SAT			0x03	/* saturation */
-#define REG_CNT			0x05	/* Y contrast */
-#define REG_BRT			0x06	/* Y brightness */
-#define REG_WB_BLUE		0x0C	/* WB blue ratio [5:0] */
-#define REG_WB_RED		0x0D	/* WB red ratio [5:0] */
-#define REG_EXP			0x10	/* exposure */
-
-/* Window parameters */
-#define HWSBASE 0x38
-#define HWEBASE 0x3A
-#define VWSBASE 0x05
-#define VWEBASE 0x06
-
-struct ov6x20 {
-	int auto_brt;
-	int auto_exp;
-	int backlight;
-	int bandfilt;
-	int mirror;
-};
-
-/* Initial values for use with OV511/OV511+ cameras */
-static struct ovcamchip_regvals regvals_init_6x20_511[] = {
-	{ 0x12, 0x80 }, /* reset */
-	{ 0x11, 0x01 },
-	{ 0x03, 0x60 },
-	{ 0x05, 0x7f }, /* For when autoadjust is off */
-	{ 0x07, 0xa8 },
-	{ 0x0c, 0x24 },
-	{ 0x0d, 0x24 },
-	{ 0x0f, 0x15 }, /* COMS */
-	{ 0x10, 0x75 }, /* AEC Exposure time */
-	{ 0x12, 0x24 }, /* Enable AGC and AWB */
-	{ 0x14, 0x04 },
-	{ 0x16, 0x03 },
-	{ 0x26, 0xb2 }, /* BLC enable */
-	/* 0x28: 0x05 Selects RGB format if RGB on */
-	{ 0x28, 0x05 },
-	{ 0x2a, 0x04 }, /* Disable framerate adjust */
-	{ 0x2d, 0x99 },
-	{ 0x33, 0xa0 }, /* Color Processing Parameter */
-	{ 0x34, 0xd2 }, /* Max A/D range */
-	{ 0x38, 0x8b },
-	{ 0x39, 0x40 },
-
-	{ 0x3c, 0x39 }, /* Enable AEC mode changing */
-	{ 0x3c, 0x3c }, /* Change AEC mode */
-	{ 0x3c, 0x24 }, /* Disable AEC mode changing */
-
-	{ 0x3d, 0x80 },
-	/* These next two registers (0x4a, 0x4b) are undocumented. They
-	 * control the color balance */
-	{ 0x4a, 0x80 },
-	{ 0x4b, 0x80 },
-	{ 0x4d, 0xd2 }, /* This reduces noise a bit */
-	{ 0x4e, 0xc1 },
-	{ 0x4f, 0x04 },
-	{ 0xff, 0xff },	/* END MARKER */
-};
-
-/* Initial values for use with OV518 cameras */
-static struct ovcamchip_regvals regvals_init_6x20_518[] = {
-	{ 0x12, 0x80 }, /* Do a reset */
-	{ 0x03, 0xc0 }, /* Saturation */
-	{ 0x05, 0x8a }, /* Contrast */
-	{ 0x0c, 0x24 }, /* AWB blue */
-	{ 0x0d, 0x24 }, /* AWB red */
-	{ 0x0e, 0x8d }, /* Additional 2x gain */
-	{ 0x0f, 0x25 }, /* Black expanding level = 1.3V */
-	{ 0x11, 0x01 }, /* Clock div. */
-	{ 0x12, 0x24 }, /* Enable AGC and AWB */
-	{ 0x13, 0x01 }, /* (default) */
-	{ 0x14, 0x80 }, /* Set reserved bit 7 */
-	{ 0x15, 0x01 }, /* (default) */
-	{ 0x16, 0x03 }, /* (default) */
-	{ 0x17, 0x38 }, /* (default) */
-	{ 0x18, 0xea }, /* (default) */
-	{ 0x19, 0x04 },
-	{ 0x1a, 0x93 },
-	{ 0x1b, 0x00 }, /* (default) */
-	{ 0x1e, 0xc4 }, /* (default) */
-	{ 0x1f, 0x04 }, /* (default) */
-	{ 0x20, 0x20 }, /* Enable 1st stage aperture correction */
-	{ 0x21, 0x10 }, /* Y offset */
-	{ 0x22, 0x88 }, /* U offset */
-	{ 0x23, 0xc0 }, /* Set XTAL power level */
-	{ 0x24, 0x53 }, /* AEC bright ratio */
-	{ 0x25, 0x7a }, /* AEC black ratio */
-	{ 0x26, 0xb2 }, /* BLC enable */
-	{ 0x27, 0xa2 }, /* Full output range */
-	{ 0x28, 0x01 }, /* (default) */
-	{ 0x29, 0x00 }, /* (default) */
-	{ 0x2a, 0x84 }, /* (default) */
-	{ 0x2b, 0xa8 }, /* Set custom frame rate */
-	{ 0x2c, 0xa0 }, /* (reserved) */
-	{ 0x2d, 0x95 }, /* Enable banding filter */
-	{ 0x2e, 0x88 }, /* V offset */
-	{ 0x33, 0x22 }, /* Luminance gamma on */
-	{ 0x34, 0xc7 }, /* A/D bias */
-	{ 0x36, 0x12 }, /* (reserved) */
-	{ 0x37, 0x63 }, /* (reserved) */
-	{ 0x38, 0x8b }, /* Quick AEC/AEB */
-	{ 0x39, 0x00 }, /* (default) */
-	{ 0x3a, 0x0f }, /* (default) */
-	{ 0x3b, 0x3c }, /* (default) */
-	{ 0x3c, 0x5c }, /* AEC controls */
-	{ 0x3d, 0x80 }, /* Drop 1 (bad) frame when AEC change */
-	{ 0x3e, 0x80 }, /* (default) */
-	{ 0x3f, 0x02 }, /* (default) */
-	{ 0x40, 0x10 }, /* (reserved) */
-	{ 0x41, 0x10 }, /* (reserved) */
-	{ 0x42, 0x00 }, /* (reserved) */
-	{ 0x43, 0x7f }, /* (reserved) */
-	{ 0x44, 0x80 }, /* (reserved) */
-	{ 0x45, 0x1c }, /* (reserved) */
-	{ 0x46, 0x1c }, /* (reserved) */
-	{ 0x47, 0x80 }, /* (reserved) */
-	{ 0x48, 0x5f }, /* (reserved) */
-	{ 0x49, 0x00 }, /* (reserved) */
-	{ 0x4a, 0x00 }, /* Color balance (undocumented) */
-	{ 0x4b, 0x80 }, /* Color balance (undocumented) */
-	{ 0x4c, 0x58 }, /* (reserved) */
-	{ 0x4d, 0xd2 }, /* U *= .938, V *= .838 */
-	{ 0x4e, 0xa0 }, /* (default) */
-	{ 0x4f, 0x04 }, /* UV 3-point average */
-	{ 0x50, 0xff }, /* (reserved) */
-	{ 0x51, 0x58 }, /* (reserved) */
-	{ 0x52, 0xc0 }, /* (reserved) */
-	{ 0x53, 0x42 }, /* (reserved) */
-	{ 0x27, 0xa6 }, /* Enable manual offset adj. (reg 21 & 22) */
-	{ 0x12, 0x20 },
-	{ 0x12, 0x24 },
-
-	{ 0xff, 0xff },	/* END MARKER */
-};
-
-/* This initializes the OV6x20 camera chip and relevant variables. */
-static int ov6x20_init(struct i2c_client *c)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	struct ov6x20 *s;
-	int rc;
-
-	DDEBUG(4, &c->dev, "entered");
-
-	switch (c->adapter->id) {
-	case I2C_HW_SMBUS_OV511:
-		rc = ov_write_regvals(c, regvals_init_6x20_511);
-		break;
-	case I2C_HW_SMBUS_OV518:
-		rc = ov_write_regvals(c, regvals_init_6x20_518);
-		break;
-	default:
-		dev_err(&c->dev, "ov6x20: Unsupported adapter\n");
-		rc = -ENODEV;
-	}
-
-	if (rc < 0)
-		return rc;
-
-	ov->spriv = s = kzalloc(sizeof *s, GFP_KERNEL);
-	if (!s)
-		return -ENOMEM;
-
-	s->auto_brt = 1;
-	s->auto_exp = 1;
-
-	return rc;
-}
-
-static int ov6x20_free(struct i2c_client *c)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-
-	kfree(ov->spriv);
-	return 0;
-}
-
-static int ov6x20_set_control(struct i2c_client *c,
-			      struct ovcamchip_control *ctl)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	struct ov6x20 *s = ov->spriv;
-	int rc;
-	int v = ctl->value;
-
-	switch (ctl->id) {
-	case OVCAMCHIP_CID_CONT:
-		rc = ov_write(c, REG_CNT, v >> 8);
-		break;
-	case OVCAMCHIP_CID_BRIGHT:
-		rc = ov_write(c, REG_BRT, v >> 8);
-		break;
-	case OVCAMCHIP_CID_SAT:
-		rc = ov_write(c, REG_SAT, v >> 8);
-		break;
-	case OVCAMCHIP_CID_HUE:
-		rc = ov_write(c, REG_RED, 0xFF - (v >> 8));
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write(c, REG_BLUE, v >> 8);
-		break;
-	case OVCAMCHIP_CID_EXP:
-		rc = ov_write(c, REG_EXP, v);
-		break;
-	case OVCAMCHIP_CID_FREQ:
-	{
-		int sixty = (v == 60);
-
-		rc = ov_write(c, 0x2b, sixty?0xa8:0x28);
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write(c, 0x2a, sixty?0x84:0xa4);
-		break;
-	}
-	case OVCAMCHIP_CID_BANDFILT:
-		rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
-		s->bandfilt = v;
-		break;
-	case OVCAMCHIP_CID_AUTOBRIGHT:
-		rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
-		s->auto_brt = v;
-		break;
-	case OVCAMCHIP_CID_AUTOEXP:
-		rc = ov_write_mask(c, 0x13, v?0x01:0x00, 0x01);
-		s->auto_exp = v;
-		break;
-	case OVCAMCHIP_CID_BACKLIGHT:
-	{
-		rc = ov_write_mask(c, 0x4e, v?0xe0:0xc0, 0xe0);
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write_mask(c, 0x29, v?0x08:0x00, 0x08);
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write_mask(c, 0x0e, v?0x80:0x00, 0x80);
-		s->backlight = v;
-		break;
-	}
-	case OVCAMCHIP_CID_MIRROR:
-		rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
-		s->mirror = v;
-		break;
-	default:
-		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
-		return -EPERM;
-	}
-
-out:
-	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
-	return rc;
-}
-
-static int ov6x20_get_control(struct i2c_client *c,
-			      struct ovcamchip_control *ctl)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	struct ov6x20 *s = ov->spriv;
-	int rc = 0;
-	unsigned char val = 0;
-
-	switch (ctl->id) {
-	case OVCAMCHIP_CID_CONT:
-		rc = ov_read(c, REG_CNT, &val);
-		ctl->value = val << 8;
-		break;
-	case OVCAMCHIP_CID_BRIGHT:
-		rc = ov_read(c, REG_BRT, &val);
-		ctl->value = val << 8;
-		break;
-	case OVCAMCHIP_CID_SAT:
-		rc = ov_read(c, REG_SAT, &val);
-		ctl->value = val << 8;
-		break;
-	case OVCAMCHIP_CID_HUE:
-		rc = ov_read(c, REG_BLUE, &val);
-		ctl->value = val << 8;
-		break;
-	case OVCAMCHIP_CID_EXP:
-		rc = ov_read(c, REG_EXP, &val);
-		ctl->value = val;
-		break;
-	case OVCAMCHIP_CID_BANDFILT:
-		ctl->value = s->bandfilt;
-		break;
-	case OVCAMCHIP_CID_AUTOBRIGHT:
-		ctl->value = s->auto_brt;
-		break;
-	case OVCAMCHIP_CID_AUTOEXP:
-		ctl->value = s->auto_exp;
-		break;
-	case OVCAMCHIP_CID_BACKLIGHT:
-		ctl->value = s->backlight;
-		break;
-	case OVCAMCHIP_CID_MIRROR:
-		ctl->value = s->mirror;
-		break;
-	default:
-		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
-		return -EPERM;
-	}
-
-	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
-	return rc;
-}
-
-static int ov6x20_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
-{
-	/******** QCIF-specific regs ********/
-
-	ov_write(c, 0x14, win->quarter?0x24:0x04);
-
-	/******** Palette-specific regs ********/
-
-	/* OV518 needs 8 bit multiplexed in color mode, and 16 bit in B&W */
-	if (c->adapter->id == I2C_HW_SMBUS_OV518) {
-		if (win->format == VIDEO_PALETTE_GREY)
-			ov_write_mask(c, 0x13, 0x00, 0x20);
-		else
-			ov_write_mask(c, 0x13, 0x20, 0x20);
-	} else {
-		if (win->format == VIDEO_PALETTE_GREY)
-			ov_write_mask(c, 0x13, 0x20, 0x20);
-		else
-			ov_write_mask(c, 0x13, 0x00, 0x20);
-	}
-
-	/******** Clock programming ********/
-
-	/* The OV6620 needs special handling. This prevents the
-	 * severe banding that normally occurs */
-
-	/* Clock down */
-	ov_write(c, 0x2a, 0x04);
-
-	ov_write(c, 0x11, win->clockdiv);
-
-	ov_write(c, 0x2a, 0x84);
-	/* This next setting is critical. It seems to improve
-	 * the gain or the contrast. The "reserved" bits seem
-	 * to have some effect in this case. */
-	ov_write(c, 0x2d, 0x85); /* FIXME: This messes up banding filter */
-
-	return 0;
-}
-
-static int ov6x20_set_window(struct i2c_client *c, struct ovcamchip_window *win)
-{
-	int ret, hwscale, vwscale;
-
-	ret = ov6x20_mode_init(c, win);
-	if (ret < 0)
-		return ret;
-
-	if (win->quarter) {
-		hwscale = 0;
-		vwscale = 0;
-	} else {
-		hwscale = 1;
-		vwscale = 1;	/* The datasheet says 0; it's wrong */
-	}
-
-	ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
-	ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
-	ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
-	ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));
-
-	return 0;
-}
-
-static int ov6x20_command(struct i2c_client *c, unsigned int cmd, void *arg)
-{
-	switch (cmd) {
-	case OVCAMCHIP_CMD_S_CTRL:
-		return ov6x20_set_control(c, arg);
-	case OVCAMCHIP_CMD_G_CTRL:
-		return ov6x20_get_control(c, arg);
-	case OVCAMCHIP_CMD_S_MODE:
-		return ov6x20_set_window(c, arg);
-	default:
-		DDEBUG(2, &c->dev, "command not supported: %d", cmd);
-		return -ENOIOCTLCMD;
-	}
-}
-
-struct ovcamchip_ops ov6x20_ops = {
-	.init    =	ov6x20_init,
-	.free    =	ov6x20_free,
-	.command =	ov6x20_command,
-};
diff --git a/drivers/media/video/ovcamchip/ov6x30.c b/drivers/media/video/ovcamchip/ov6x30.c
deleted file mode 100644
index 73b94f51a85a..000000000000
--- a/drivers/media/video/ovcamchip/ov6x30.c
+++ /dev/null
@@ -1,373 +0,0 @@
-/* OmniVision OV6630/OV6130 Camera Chip Support Code
- *
- * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
- * http://alpha.dyndns.org/ov511/
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
- */
-
-#define DEBUG
-
-#include <linux/slab.h>
-#include "ovcamchip_priv.h"
-
-/* Registers */
-#define REG_GAIN		0x00	/* gain [5:0] */
-#define REG_BLUE		0x01	/* blue gain */
-#define REG_RED			0x02	/* red gain */
-#define REG_SAT			0x03	/* saturation [7:3] */
-#define REG_CNT			0x05	/* Y contrast [3:0] */
-#define REG_BRT			0x06	/* Y brightness */
-#define REG_SHARP		0x07	/* sharpness */
-#define REG_WB_BLUE		0x0C	/* WB blue ratio [5:0] */
-#define REG_WB_RED		0x0D	/* WB red ratio [5:0] */
-#define REG_EXP			0x10	/* exposure */
-
-/* Window parameters */
-#define HWSBASE 0x38
-#define HWEBASE 0x3A
-#define VWSBASE 0x05
-#define VWEBASE 0x06
-
-struct ov6x30 {
-	int auto_brt;
-	int auto_exp;
-	int backlight;
-	int bandfilt;
-	int mirror;
-};
-
-static struct ovcamchip_regvals regvals_init_6x30[] = {
-	{ 0x12, 0x80 }, /* reset */
-	{ 0x00, 0x1f }, /* Gain */
-	{ 0x01, 0x99 }, /* Blue gain */
-	{ 0x02, 0x7c }, /* Red gain */
-	{ 0x03, 0xc0 }, /* Saturation */
-	{ 0x05, 0x0a }, /* Contrast */
-	{ 0x06, 0x95 }, /* Brightness */
-	{ 0x07, 0x2d }, /* Sharpness */
-	{ 0x0c, 0x20 },
-	{ 0x0d, 0x20 },
-	{ 0x0e, 0x20 },
-	{ 0x0f, 0x05 },
-	{ 0x10, 0x9a }, /* "exposure check" */
-	{ 0x11, 0x00 }, /* Pixel clock = fastest */
-	{ 0x12, 0x24 }, /* Enable AGC and AWB */
-	{ 0x13, 0x21 },
-	{ 0x14, 0x80 },
-	{ 0x15, 0x01 },
-	{ 0x16, 0x03 },
-	{ 0x17, 0x38 },
-	{ 0x18, 0xea },
-	{ 0x19, 0x04 },
-	{ 0x1a, 0x93 },
-	{ 0x1b, 0x00 },
-	{ 0x1e, 0xc4 },
-	{ 0x1f, 0x04 },
-	{ 0x20, 0x20 },
-	{ 0x21, 0x10 },
-	{ 0x22, 0x88 },
-	{ 0x23, 0xc0 }, /* Crystal circuit power level */
-	{ 0x25, 0x9a }, /* Increase AEC black pixel ratio */
-	{ 0x26, 0xb2 }, /* BLC enable */
-	{ 0x27, 0xa2 },
-	{ 0x28, 0x00 },
-	{ 0x29, 0x00 },
-	{ 0x2a, 0x84 }, /* (keep) */
-	{ 0x2b, 0xa8 }, /* (keep) */
-	{ 0x2c, 0xa0 },
-	{ 0x2d, 0x95 },	/* Enable auto-brightness */
-	{ 0x2e, 0x88 },
-	{ 0x33, 0x26 },
-	{ 0x34, 0x03 },
-	{ 0x36, 0x8f },
-	{ 0x37, 0x80 },
-	{ 0x38, 0x83 },
-	{ 0x39, 0x80 },
-	{ 0x3a, 0x0f },
-	{ 0x3b, 0x3c },
-	{ 0x3c, 0x1a },
-	{ 0x3d, 0x80 },
-	{ 0x3e, 0x80 },
-	{ 0x3f, 0x0e },
-	{ 0x40, 0x00 }, /* White bal */
-	{ 0x41, 0x00 }, /* White bal */
-	{ 0x42, 0x80 },
-	{ 0x43, 0x3f }, /* White bal */
-	{ 0x44, 0x80 },
-	{ 0x45, 0x20 },
-	{ 0x46, 0x20 },
-	{ 0x47, 0x80 },
-	{ 0x48, 0x7f },
-	{ 0x49, 0x00 },
-	{ 0x4a, 0x00 },
-	{ 0x4b, 0x80 },
-	{ 0x4c, 0xd0 },
-	{ 0x4d, 0x10 }, /* U = 0.563u, V = 0.714v */
-	{ 0x4e, 0x40 },
-	{ 0x4f, 0x07 }, /* UV average mode, color killer: strongest */
-	{ 0x50, 0xff },
-	{ 0x54, 0x23 }, /* Max AGC gain: 18dB */
-	{ 0x55, 0xff },
-	{ 0x56, 0x12 },
-	{ 0x57, 0x81 }, /* (default) */
-	{ 0x58, 0x75 },
-	{ 0x59, 0x01 }, /* AGC dark current compensation: +1 */
-	{ 0x5a, 0x2c },
-	{ 0x5b, 0x0f }, /* AWB chrominance levels */
-	{ 0x5c, 0x10 },
-	{ 0x3d, 0x80 },
-	{ 0x27, 0xa6 },
-	/* Toggle AWB off and on */
-	{ 0x12, 0x20 },
-	{ 0x12, 0x24 },
-
-	{ 0xff, 0xff },	/* END MARKER */
-};
-
-/* This initializes the OV6x30 camera chip and relevant variables. */
-static int ov6x30_init(struct i2c_client *c)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	struct ov6x30 *s;
-	int rc;
-
-	DDEBUG(4, &c->dev, "entered");
-
-	rc = ov_write_regvals(c, regvals_init_6x30);
-	if (rc < 0)
-		return rc;
-
-	ov->spriv = s = kzalloc(sizeof *s, GFP_KERNEL);
-	if (!s)
-		return -ENOMEM;
-
-	s->auto_brt = 1;
-	s->auto_exp = 1;
-
-	return rc;
-}
-
-static int ov6x30_free(struct i2c_client *c)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-
-	kfree(ov->spriv);
-	return 0;
-}
-
-static int ov6x30_set_control(struct i2c_client *c,
-			      struct ovcamchip_control *ctl)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	struct ov6x30 *s = ov->spriv;
-	int rc;
-	int v = ctl->value;
-
-	switch (ctl->id) {
-	case OVCAMCHIP_CID_CONT:
-		rc = ov_write_mask(c, REG_CNT, v >> 12, 0x0f);
-		break;
-	case OVCAMCHIP_CID_BRIGHT:
-		rc = ov_write(c, REG_BRT, v >> 8);
-		break;
-	case OVCAMCHIP_CID_SAT:
-		rc = ov_write(c, REG_SAT, v >> 8);
-		break;
-	case OVCAMCHIP_CID_HUE:
-		rc = ov_write(c, REG_RED, 0xFF - (v >> 8));
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write(c, REG_BLUE, v >> 8);
-		break;
-	case OVCAMCHIP_CID_EXP:
-		rc = ov_write(c, REG_EXP, v);
-		break;
-	case OVCAMCHIP_CID_FREQ:
-	{
-		int sixty = (v == 60);
-
-		rc = ov_write(c, 0x2b, sixty?0xa8:0x28);
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write(c, 0x2a, sixty?0x84:0xa4);
-		break;
-	}
-	case OVCAMCHIP_CID_BANDFILT:
-		rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
-		s->bandfilt = v;
-		break;
-	case OVCAMCHIP_CID_AUTOBRIGHT:
-		rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
-		s->auto_brt = v;
-		break;
-	case OVCAMCHIP_CID_AUTOEXP:
-		rc = ov_write_mask(c, 0x28, v?0x00:0x10, 0x10);
-		s->auto_exp = v;
-		break;
-	case OVCAMCHIP_CID_BACKLIGHT:
-	{
-		rc = ov_write_mask(c, 0x4e, v?0x80:0x60, 0xe0);
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write_mask(c, 0x29, v?0x08:0x00, 0x08);
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write_mask(c, 0x28, v?0x02:0x00, 0x02);
-		s->backlight = v;
-		break;
-	}
-	case OVCAMCHIP_CID_MIRROR:
-		rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
-		s->mirror = v;
-		break;
-	default:
-		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
-		return -EPERM;
-	}
-
-out:
-	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
-	return rc;
-}
-
-static int ov6x30_get_control(struct i2c_client *c,
-			      struct ovcamchip_control *ctl)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	struct ov6x30 *s = ov->spriv;
-	int rc = 0;
-	unsigned char val = 0;
-
-	switch (ctl->id) {
-	case OVCAMCHIP_CID_CONT:
-		rc = ov_read(c, REG_CNT, &val);
-		ctl->value = (val & 0x0f) << 12;
-		break;
-	case OVCAMCHIP_CID_BRIGHT:
-		rc = ov_read(c, REG_BRT, &val);
-		ctl->value = val << 8;
-		break;
-	case OVCAMCHIP_CID_SAT:
-		rc = ov_read(c, REG_SAT, &val);
-		ctl->value = val << 8;
-		break;
-	case OVCAMCHIP_CID_HUE:
-		rc = ov_read(c, REG_BLUE, &val);
-		ctl->value = val << 8;
-		break;
-	case OVCAMCHIP_CID_EXP:
-		rc = ov_read(c, REG_EXP, &val);
-		ctl->value = val;
-		break;
-	case OVCAMCHIP_CID_BANDFILT:
-		ctl->value = s->bandfilt;
-		break;
-	case OVCAMCHIP_CID_AUTOBRIGHT:
-		ctl->value = s->auto_brt;
-		break;
-	case OVCAMCHIP_CID_AUTOEXP:
-		ctl->value = s->auto_exp;
-		break;
-	case OVCAMCHIP_CID_BACKLIGHT:
-		ctl->value = s->backlight;
-		break;
-	case OVCAMCHIP_CID_MIRROR:
-		ctl->value = s->mirror;
-		break;
-	default:
-		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
-		return -EPERM;
-	}
-
-	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
-	return rc;
-}
-
-static int ov6x30_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
-{
-	/******** QCIF-specific regs ********/
-
-	ov_write_mask(c, 0x14, win->quarter?0x20:0x00, 0x20);
-
-	/******** Palette-specific regs ********/
-
-	if (win->format == VIDEO_PALETTE_GREY) {
-		if (c->adapter->id == I2C_HW_SMBUS_OV518) {
-			/* Do nothing - we're already in 8-bit mode */
-		} else {
-			ov_write_mask(c, 0x13, 0x20, 0x20);
-		}
-	} else {
-		/* The OV518 needs special treatment. Although both the OV518
-		 * and the OV6630 support a 16-bit video bus, only the 8 bit Y
-		 * bus is actually used. The UV bus is tied to ground.
-		 * Therefore, the OV6630 needs to be in 8-bit multiplexed
-		 * output mode */
-
-		if (c->adapter->id == I2C_HW_SMBUS_OV518) {
-			/* Do nothing - we want to stay in 8-bit mode */
-			/* Warning: Messing with reg 0x13 breaks OV518 color */
-		} else {
-			ov_write_mask(c, 0x13, 0x00, 0x20);
-		}
-	}
-
-	/******** Clock programming ********/
-
-	ov_write(c, 0x11, win->clockdiv);
-
-	return 0;
-}
-
-static int ov6x30_set_window(struct i2c_client *c, struct ovcamchip_window *win)
-{
-	int ret, hwscale, vwscale;
-
-	ret = ov6x30_mode_init(c, win);
-	if (ret < 0)
-		return ret;
-
-	if (win->quarter) {
-		hwscale = 0;
-		vwscale = 0;
-	} else {
-		hwscale = 1;
-		vwscale = 1;	/* The datasheet says 0; it's wrong */
-	}
-
-	ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
-	ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
-	ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
-	ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));
-
-	return 0;
-}
-
-static int ov6x30_command(struct i2c_client *c, unsigned int cmd, void *arg)
-{
-	switch (cmd) {
-	case OVCAMCHIP_CMD_S_CTRL:
-		return ov6x30_set_control(c, arg);
-	case OVCAMCHIP_CMD_G_CTRL:
-		return ov6x30_get_control(c, arg);
-	case OVCAMCHIP_CMD_S_MODE:
-		return ov6x30_set_window(c, arg);
-	default:
-		DDEBUG(2, &c->dev, "command not supported: %d", cmd);
-		return -ENOIOCTLCMD;
-	}
-}
-
-struct ovcamchip_ops ov6x30_ops = {
-	.init    =	ov6x30_init,
-	.free    =	ov6x30_free,
-	.command =	ov6x30_command,
-};
diff --git a/drivers/media/video/ovcamchip/ov76be.c b/drivers/media/video/ovcamchip/ov76be.c
deleted file mode 100644
index 11f6be924d8b..000000000000
--- a/drivers/media/video/ovcamchip/ov76be.c
+++ /dev/null
@@ -1,302 +0,0 @@
-/* OmniVision OV76BE Camera Chip Support Code
- *
- * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
- * http://alpha.dyndns.org/ov511/
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
- */
-
-#define DEBUG
-
-#include <linux/slab.h>
-#include "ovcamchip_priv.h"
-
-/* OV7610 registers: Since the OV76BE is undocumented, we'll settle for these
- * for now. */
-#define REG_GAIN		0x00	/* gain [5:0] */
-#define REG_BLUE		0x01	/* blue channel balance */
-#define REG_RED			0x02	/* red channel balance */
-#define REG_SAT			0x03	/* saturation */
-#define REG_CNT			0x05	/* Y contrast */
-#define REG_BRT			0x06	/* Y brightness */
-#define REG_BLUE_BIAS		0x0C	/* blue channel bias [5:0] */
-#define REG_RED_BIAS		0x0D	/* red channel bias [5:0] */
-#define REG_GAMMA_COEFF		0x0E	/* gamma settings */
-#define REG_WB_RANGE		0x0F	/* AEC/ALC/S-AWB settings */
-#define REG_EXP			0x10	/* manual exposure setting */
-#define REG_CLOCK		0x11	/* polarity/clock prescaler */
-#define REG_FIELD_DIVIDE	0x16	/* field interval/mode settings */
-#define REG_HWIN_START		0x17	/* horizontal window start */
-#define REG_HWIN_END		0x18	/* horizontal window end */
-#define REG_VWIN_START		0x19	/* vertical window start */
-#define REG_VWIN_END		0x1A	/* vertical window end */
-#define REG_PIXEL_SHIFT   	0x1B	/* pixel shift */
-#define REG_YOFFSET		0x21	/* Y channel offset */
-#define REG_UOFFSET		0x22	/* U channel offset */
-#define REG_ECW			0x24	/* exposure white level for AEC */
-#define REG_ECB			0x25	/* exposure black level for AEC */
-#define REG_FRAMERATE_H		0x2A	/* frame rate MSB + misc */
-#define REG_FRAMERATE_L		0x2B	/* frame rate LSB */
-#define REG_ALC			0x2C	/* Auto Level Control settings */
-#define REG_VOFFSET		0x2E	/* V channel offset adjustment */
-#define REG_ARRAY_BIAS		0x2F	/* array bias -- don't change */
-#define REG_YGAMMA		0x33	/* misc gamma settings [7:6] */
-#define REG_BIAS_ADJUST		0x34	/* misc bias settings */
-
-/* Window parameters */
-#define HWSBASE 0x38
-#define HWEBASE 0x3a
-#define VWSBASE 0x05
-#define VWEBASE 0x05
-
-struct ov76be {
-	int auto_brt;
-	int auto_exp;
-	int bandfilt;
-	int mirror;
-};
-
-/* NOTE: These are the same as the 7x10 settings, but should eventually be
- * optimized for the OV76BE */
-static struct ovcamchip_regvals regvals_init_76be[] = {
-	{ 0x10, 0xff },
-	{ 0x16, 0x03 },
-	{ 0x28, 0x24 },
-	{ 0x2b, 0xac },
-	{ 0x12, 0x00 },
-	{ 0x38, 0x81 },
-	{ 0x28, 0x24 },	/* 0c */
-	{ 0x0f, 0x85 },	/* lg's setting */
-	{ 0x15, 0x01 },
-	{ 0x20, 0x1c },
-	{ 0x23, 0x2a },
-	{ 0x24, 0x10 },
-	{ 0x25, 0x8a },
-	{ 0x26, 0xa2 },
-	{ 0x27, 0xc2 },
-	{ 0x2a, 0x04 },
-	{ 0x2c, 0xfe },
-	{ 0x2d, 0x93 },
-	{ 0x30, 0x71 },
-	{ 0x31, 0x60 },
-	{ 0x32, 0x26 },
-	{ 0x33, 0x20 },
-	{ 0x34, 0x48 },
-	{ 0x12, 0x24 },
-	{ 0x11, 0x01 },
-	{ 0x0c, 0x24 },
-	{ 0x0d, 0x24 },
-	{ 0xff, 0xff },	/* END MARKER */
-};
-
-/* This initializes the OV76be camera chip and relevant variables. */
-static int ov76be_init(struct i2c_client *c)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	struct ov76be *s;
-	int rc;
-
-	DDEBUG(4, &c->dev, "entered");
-
-	rc = ov_write_regvals(c, regvals_init_76be);
-	if (rc < 0)
-		return rc;
-
-	ov->spriv = s = kzalloc(sizeof *s, GFP_KERNEL);
-	if (!s)
-		return -ENOMEM;
-
-	s->auto_brt = 1;
-	s->auto_exp = 1;
-
-	return rc;
-}
-
-static int ov76be_free(struct i2c_client *c)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-
-	kfree(ov->spriv);
-	return 0;
-}
-
-static int ov76be_set_control(struct i2c_client *c,
-			      struct ovcamchip_control *ctl)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	struct ov76be *s = ov->spriv;
-	int rc;
-	int v = ctl->value;
-
-	switch (ctl->id) {
-	case OVCAMCHIP_CID_BRIGHT:
-		rc = ov_write(c, REG_BRT, v >> 8);
-		break;
-	case OVCAMCHIP_CID_SAT:
-		rc = ov_write(c, REG_SAT, v >> 8);
-		break;
-	case OVCAMCHIP_CID_EXP:
-		rc = ov_write(c, REG_EXP, v);
-		break;
-	case OVCAMCHIP_CID_FREQ:
-	{
-		int sixty = (v == 60);
-
-		rc = ov_write_mask(c, 0x2a, sixty?0x00:0x80, 0x80);
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write(c, 0x2b, sixty?0x00:0xac);
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write_mask(c, 0x76, 0x01, 0x01);
-		break;
-	}
-	case OVCAMCHIP_CID_BANDFILT:
-		rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
-		s->bandfilt = v;
-		break;
-	case OVCAMCHIP_CID_AUTOBRIGHT:
-		rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
-		s->auto_brt = v;
-		break;
-	case OVCAMCHIP_CID_AUTOEXP:
-		rc = ov_write_mask(c, 0x13, v?0x01:0x00, 0x01);
-		s->auto_exp = v;
-		break;
-	case OVCAMCHIP_CID_MIRROR:
-		rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
-		s->mirror = v;
-		break;
-	default:
-		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
-		return -EPERM;
-	}
-
-out:
-	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
-	return rc;
-}
-
-static int ov76be_get_control(struct i2c_client *c,
-			      struct ovcamchip_control *ctl)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	struct ov76be *s = ov->spriv;
-	int rc = 0;
-	unsigned char val = 0;
-
-	switch (ctl->id) {
-	case OVCAMCHIP_CID_BRIGHT:
-		rc = ov_read(c, REG_BRT, &val);
-		ctl->value = val << 8;
-		break;
-	case OVCAMCHIP_CID_SAT:
-		rc = ov_read(c, REG_SAT, &val);
-		ctl->value = val << 8;
-		break;
-	case OVCAMCHIP_CID_EXP:
-		rc = ov_read(c, REG_EXP, &val);
-		ctl->value = val;
-		break;
-	case OVCAMCHIP_CID_BANDFILT:
-		ctl->value = s->bandfilt;
-		break;
-	case OVCAMCHIP_CID_AUTOBRIGHT:
-		ctl->value = s->auto_brt;
-		break;
-	case OVCAMCHIP_CID_AUTOEXP:
-		ctl->value = s->auto_exp;
-		break;
-	case OVCAMCHIP_CID_MIRROR:
-		ctl->value = s->mirror;
-		break;
-	default:
-		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
-		return -EPERM;
-	}
-
-	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
-	return rc;
-}
-
-static int ov76be_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
-{
-	int qvga = win->quarter;
-
-	/******** QVGA-specific regs ********/
-
-	ov_write(c, 0x14, qvga?0xa4:0x84);
-
-	/******** Palette-specific regs ********/
-
-	if (win->format == VIDEO_PALETTE_GREY) {
-		ov_write_mask(c, 0x0e, 0x40, 0x40);
-		ov_write_mask(c, 0x13, 0x20, 0x20);
-	} else {
-		ov_write_mask(c, 0x0e, 0x00, 0x40);
-		ov_write_mask(c, 0x13, 0x00, 0x20);
-	}
-
-	/******** Clock programming ********/
-
-	ov_write(c, 0x11, win->clockdiv);
-
-	/******** Resolution-specific ********/
-
-	if (win->width == 640 && win->height == 480)
-		ov_write(c, 0x35, 0x9e);
-	else
-		ov_write(c, 0x35, 0x1e);
-
-	return 0;
-}
-
-static int ov76be_set_window(struct i2c_client *c, struct ovcamchip_window *win)
-{
-	int ret, hwscale, vwscale;
-
-	ret = ov76be_mode_init(c, win);
-	if (ret < 0)
-		return ret;
-
-	if (win->quarter) {
-		hwscale = 1;
-		vwscale = 0;
-	} else {
-		hwscale = 2;
-		vwscale = 1;
-	}
-
-	ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
-	ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
-	ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
-	ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));
-
-	return 0;
-}
-
-static int ov76be_command(struct i2c_client *c, unsigned int cmd, void *arg)
-{
-	switch (cmd) {
-	case OVCAMCHIP_CMD_S_CTRL:
-		return ov76be_set_control(c, arg);
-	case OVCAMCHIP_CMD_G_CTRL:
-		return ov76be_get_control(c, arg);
-	case OVCAMCHIP_CMD_S_MODE:
-		return ov76be_set_window(c, arg);
-	default:
-		DDEBUG(2, &c->dev, "command not supported: %d", cmd);
-		return -ENOIOCTLCMD;
-	}
-}
-
-struct ovcamchip_ops ov76be_ops = {
-	.init    =	ov76be_init,
-	.free    =	ov76be_free,
-	.command =	ov76be_command,
-};
diff --git a/drivers/media/video/ovcamchip/ov7x10.c b/drivers/media/video/ovcamchip/ov7x10.c
deleted file mode 100644
index 5206e7913924..000000000000
--- a/drivers/media/video/ovcamchip/ov7x10.c
+++ /dev/null
@@ -1,334 +0,0 @@
-/* OmniVision OV7610/OV7110 Camera Chip Support Code
- *
- * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
- * http://alpha.dyndns.org/ov511/
- *
- * Color fixes by by Orion Sky Lawlor <olawlor@acm.org> (2/26/2000)
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
- */
-
-#define DEBUG
-
-#include <linux/slab.h>
-#include "ovcamchip_priv.h"
-
-/* Registers */
-#define REG_GAIN		0x00	/* gain [5:0] */
-#define REG_BLUE		0x01	/* blue channel balance */
-#define REG_RED			0x02	/* red channel balance */
-#define REG_SAT			0x03	/* saturation */
-#define REG_CNT			0x05	/* Y contrast */
-#define REG_BRT			0x06	/* Y brightness */
-#define REG_BLUE_BIAS		0x0C	/* blue channel bias [5:0] */
-#define REG_RED_BIAS		0x0D	/* red channel bias [5:0] */
-#define REG_GAMMA_COEFF		0x0E	/* gamma settings */
-#define REG_WB_RANGE		0x0F	/* AEC/ALC/S-AWB settings */
-#define REG_EXP			0x10	/* manual exposure setting */
-#define REG_CLOCK		0x11	/* polarity/clock prescaler */
-#define REG_FIELD_DIVIDE	0x16	/* field interval/mode settings */
-#define REG_HWIN_START		0x17	/* horizontal window start */
-#define REG_HWIN_END		0x18	/* horizontal window end */
-#define REG_VWIN_START		0x19	/* vertical window start */
-#define REG_VWIN_END		0x1A	/* vertical window end */
-#define REG_PIXEL_SHIFT   	0x1B	/* pixel shift */
-#define REG_YOFFSET		0x21	/* Y channel offset */
-#define REG_UOFFSET		0x22	/* U channel offset */
-#define REG_ECW			0x24	/* exposure white level for AEC */
-#define REG_ECB			0x25	/* exposure black level for AEC */
-#define REG_FRAMERATE_H		0x2A	/* frame rate MSB + misc */
-#define REG_FRAMERATE_L		0x2B	/* frame rate LSB */
-#define REG_ALC			0x2C	/* Auto Level Control settings */
-#define REG_VOFFSET		0x2E	/* V channel offset adjustment */
-#define REG_ARRAY_BIAS		0x2F	/* array bias -- don't change */
-#define REG_YGAMMA		0x33	/* misc gamma settings [7:6] */
-#define REG_BIAS_ADJUST		0x34	/* misc bias settings */
-
-/* Window parameters */
-#define HWSBASE 0x38
-#define HWEBASE 0x3a
-#define VWSBASE 0x05
-#define VWEBASE 0x05
-
-struct ov7x10 {
-	int auto_brt;
-	int auto_exp;
-	int bandfilt;
-	int mirror;
-};
-
-/* Lawrence Glaister <lg@jfm.bc.ca> reports:
- *
- * Register 0x0f in the 7610 has the following effects:
- *
- * 0x85 (AEC method 1): Best overall, good contrast range
- * 0x45 (AEC method 2): Very overexposed
- * 0xa5 (spec sheet default): Ok, but the black level is
- *	shifted resulting in loss of contrast
- * 0x05 (old driver setting): very overexposed, too much
- *	contrast
- */
-static struct ovcamchip_regvals regvals_init_7x10[] = {
-	{ 0x10, 0xff },
-	{ 0x16, 0x03 },
-	{ 0x28, 0x24 },
-	{ 0x2b, 0xac },
-	{ 0x12, 0x00 },
-	{ 0x38, 0x81 },
-	{ 0x28, 0x24 },	/* 0c */
-	{ 0x0f, 0x85 },	/* lg's setting */
-	{ 0x15, 0x01 },
-	{ 0x20, 0x1c },
-	{ 0x23, 0x2a },
-	{ 0x24, 0x10 },
-	{ 0x25, 0x8a },
-	{ 0x26, 0xa2 },
-	{ 0x27, 0xc2 },
-	{ 0x2a, 0x04 },
-	{ 0x2c, 0xfe },
-	{ 0x2d, 0x93 },
-	{ 0x30, 0x71 },
-	{ 0x31, 0x60 },
-	{ 0x32, 0x26 },
-	{ 0x33, 0x20 },
-	{ 0x34, 0x48 },
-	{ 0x12, 0x24 },
-	{ 0x11, 0x01 },
-	{ 0x0c, 0x24 },
-	{ 0x0d, 0x24 },
-	{ 0xff, 0xff },	/* END MARKER */
-};
-
-/* This initializes the OV7x10 camera chip and relevant variables. */
-static int ov7x10_init(struct i2c_client *c)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	struct ov7x10 *s;
-	int rc;
-
-	DDEBUG(4, &c->dev, "entered");
-
-	rc = ov_write_regvals(c, regvals_init_7x10);
-	if (rc < 0)
-		return rc;
-
-	ov->spriv = s = kzalloc(sizeof *s, GFP_KERNEL);
-	if (!s)
-		return -ENOMEM;
-
-	s->auto_brt = 1;
-	s->auto_exp = 1;
-
-	return rc;
-}
-
-static int ov7x10_free(struct i2c_client *c)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-
-	kfree(ov->spriv);
-	return 0;
-}
-
-static int ov7x10_set_control(struct i2c_client *c,
-			      struct ovcamchip_control *ctl)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	struct ov7x10 *s = ov->spriv;
-	int rc;
-	int v = ctl->value;
-
-	switch (ctl->id) {
-	case OVCAMCHIP_CID_CONT:
-		rc = ov_write(c, REG_CNT, v >> 8);
-		break;
-	case OVCAMCHIP_CID_BRIGHT:
-		rc = ov_write(c, REG_BRT, v >> 8);
-		break;
-	case OVCAMCHIP_CID_SAT:
-		rc = ov_write(c, REG_SAT, v >> 8);
-		break;
-	case OVCAMCHIP_CID_HUE:
-		rc = ov_write(c, REG_RED, 0xFF - (v >> 8));
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write(c, REG_BLUE, v >> 8);
-		break;
-	case OVCAMCHIP_CID_EXP:
-		rc = ov_write(c, REG_EXP, v);
-		break;
-	case OVCAMCHIP_CID_FREQ:
-	{
-		int sixty = (v == 60);
-
-		rc = ov_write_mask(c, 0x2a, sixty?0x00:0x80, 0x80);
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write(c, 0x2b, sixty?0x00:0xac);
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write_mask(c, 0x13, 0x10, 0x10);
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write_mask(c, 0x13, 0x00, 0x10);
-		break;
-	}
-	case OVCAMCHIP_CID_BANDFILT:
-		rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
-		s->bandfilt = v;
-		break;
-	case OVCAMCHIP_CID_AUTOBRIGHT:
-		rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
-		s->auto_brt = v;
-		break;
-	case OVCAMCHIP_CID_AUTOEXP:
-		rc = ov_write_mask(c, 0x29, v?0x00:0x80, 0x80);
-		s->auto_exp = v;
-		break;
-	case OVCAMCHIP_CID_MIRROR:
-		rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
-		s->mirror = v;
-		break;
-	default:
-		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
-		return -EPERM;
-	}
-
-out:
-	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
-	return rc;
-}
-
-static int ov7x10_get_control(struct i2c_client *c,
-			      struct ovcamchip_control *ctl)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	struct ov7x10 *s = ov->spriv;
-	int rc = 0;
-	unsigned char val = 0;
-
-	switch (ctl->id) {
-	case OVCAMCHIP_CID_CONT:
-		rc = ov_read(c, REG_CNT, &val);
-		ctl->value = val << 8;
-		break;
-	case OVCAMCHIP_CID_BRIGHT:
-		rc = ov_read(c, REG_BRT, &val);
-		ctl->value = val << 8;
-		break;
-	case OVCAMCHIP_CID_SAT:
-		rc = ov_read(c, REG_SAT, &val);
-		ctl->value = val << 8;
-		break;
-	case OVCAMCHIP_CID_HUE:
-		rc = ov_read(c, REG_BLUE, &val);
-		ctl->value = val << 8;
-		break;
-	case OVCAMCHIP_CID_EXP:
-		rc = ov_read(c, REG_EXP, &val);
-		ctl->value = val;
-		break;
-	case OVCAMCHIP_CID_BANDFILT:
-		ctl->value = s->bandfilt;
-		break;
-	case OVCAMCHIP_CID_AUTOBRIGHT:
-		ctl->value = s->auto_brt;
-		break;
-	case OVCAMCHIP_CID_AUTOEXP:
-		ctl->value = s->auto_exp;
-		break;
-	case OVCAMCHIP_CID_MIRROR:
-		ctl->value = s->mirror;
-		break;
-	default:
-		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
-		return -EPERM;
-	}
-
-	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
-	return rc;
-}
-
-static int ov7x10_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
-{
-	int qvga = win->quarter;
-
-	/******** QVGA-specific regs ********/
-
-	ov_write(c, 0x14, qvga?0x24:0x04);
-
-	/******** Palette-specific regs ********/
-
-	if (win->format == VIDEO_PALETTE_GREY) {
-		ov_write_mask(c, 0x0e, 0x40, 0x40);
-		ov_write_mask(c, 0x13, 0x20, 0x20);
-	} else {
-		ov_write_mask(c, 0x0e, 0x00, 0x40);
-		ov_write_mask(c, 0x13, 0x00, 0x20);
-	}
-
-	/******** Clock programming ********/
-
-	ov_write(c, 0x11, win->clockdiv);
-
-	/******** Resolution-specific ********/
-
-	if (win->width == 640 && win->height == 480)
-		ov_write(c, 0x35, 0x9e);
-	else
-		ov_write(c, 0x35, 0x1e);
-
-	return 0;
-}
-
-static int ov7x10_set_window(struct i2c_client *c, struct ovcamchip_window *win)
-{
-	int ret, hwscale, vwscale;
-
-	ret = ov7x10_mode_init(c, win);
-	if (ret < 0)
-		return ret;
-
-	if (win->quarter) {
-		hwscale = 1;
-		vwscale = 0;
-	} else {
-		hwscale = 2;
-		vwscale = 1;
-	}
-
-	ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
-	ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
-	ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
-	ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));
-
-	return 0;
-}
-
-static int ov7x10_command(struct i2c_client *c, unsigned int cmd, void *arg)
-{
-	switch (cmd) {
-	case OVCAMCHIP_CMD_S_CTRL:
-		return ov7x10_set_control(c, arg);
-	case OVCAMCHIP_CMD_G_CTRL:
-		return ov7x10_get_control(c, arg);
-	case OVCAMCHIP_CMD_S_MODE:
-		return ov7x10_set_window(c, arg);
-	default:
-		DDEBUG(2, &c->dev, "command not supported: %d", cmd);
-		return -ENOIOCTLCMD;
-	}
-}
-
-struct ovcamchip_ops ov7x10_ops = {
-	.init    =	ov7x10_init,
-	.free    =	ov7x10_free,
-	.command =	ov7x10_command,
-};
diff --git a/drivers/media/video/ovcamchip/ov7x20.c b/drivers/media/video/ovcamchip/ov7x20.c
deleted file mode 100644
index 8e26ae338f31..000000000000
--- a/drivers/media/video/ovcamchip/ov7x20.c
+++ /dev/null
@@ -1,454 +0,0 @@
-/* OmniVision OV7620/OV7120 Camera Chip Support Code
- *
- * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
- * http://alpha.dyndns.org/ov511/
- *
- * OV7620 fixes by Charl P. Botha <cpbotha@ieee.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
- */
-
-#define DEBUG
-
-#include <linux/slab.h>
-#include "ovcamchip_priv.h"
-
-/* Registers */
-#define REG_GAIN		0x00	/* gain [5:0] */
-#define REG_BLUE		0x01	/* blue gain */
-#define REG_RED			0x02	/* red gain */
-#define REG_SAT			0x03	/* saturation */
-#define REG_BRT			0x06	/* Y brightness */
-#define REG_SHARP		0x07	/* analog sharpness */
-#define REG_BLUE_BIAS		0x0C	/* WB blue ratio [5:0] */
-#define REG_RED_BIAS		0x0D	/* WB red ratio [5:0] */
-#define REG_EXP			0x10	/* exposure */
-
-/* Default control settings. Values are in terms of V4L2 controls. */
-#define OV7120_DFL_BRIGHT     0x60
-#define OV7620_DFL_BRIGHT     0x60
-#define OV7120_DFL_SAT        0xb0
-#define OV7620_DFL_SAT        0xc0
-#define DFL_AUTO_EXP             1
-#define DFL_AUTO_GAIN            1
-#define OV7120_DFL_GAIN       0x00
-#define OV7620_DFL_GAIN       0x00
-/* NOTE: Since autoexposure is the default, these aren't programmed into the
- * OV7x20 chip. They are just here because V4L2 expects a default */
-#define OV7120_DFL_EXP        0x7f
-#define OV7620_DFL_EXP        0x7f
-
-/* Window parameters */
-#define HWSBASE 0x2F	/* From 7620.SET (spec is wrong) */
-#define HWEBASE 0x2F
-#define VWSBASE 0x05
-#define VWEBASE 0x05
-
-struct ov7x20 {
-	int auto_brt;
-	int auto_exp;
-	int auto_gain;
-	int backlight;
-	int bandfilt;
-	int mirror;
-};
-
-/* Contrast look-up table */
-static unsigned char ctab[] = {
-	0x01, 0x05, 0x09, 0x11, 0x15, 0x35, 0x37, 0x57,
-	0x5b, 0xa5, 0xa7, 0xc7, 0xc9, 0xcf, 0xef, 0xff
-};
-
-/* Settings for (Black & White) OV7120 camera chip */
-static struct ovcamchip_regvals regvals_init_7120[] = {
-	{ 0x12, 0x80 }, /* reset */
-	{ 0x13, 0x00 }, /* Autoadjust off */
-	{ 0x12, 0x20 }, /* Disable AWB */
-	{ 0x13, DFL_AUTO_GAIN?0x01:0x00 }, /* Autoadjust on (if desired) */
-	{ 0x00, OV7120_DFL_GAIN },
-	{ 0x01, 0x80 },
-	{ 0x02, 0x80 },
-	{ 0x03, OV7120_DFL_SAT },
-	{ 0x06, OV7120_DFL_BRIGHT },
-	{ 0x07, 0x00 },
-	{ 0x0c, 0x20 },
-	{ 0x0d, 0x20 },
-	{ 0x11, 0x01 },
-	{ 0x14, 0x84 },
-	{ 0x15, 0x01 },
-	{ 0x16, 0x03 },
-	{ 0x17, 0x2f },
-	{ 0x18, 0xcf },
-	{ 0x19, 0x06 },
-	{ 0x1a, 0xf5 },
-	{ 0x1b, 0x00 },
-	{ 0x20, 0x08 },
-	{ 0x21, 0x80 },
-	{ 0x22, 0x80 },
-	{ 0x23, 0x00 },
-	{ 0x26, 0xa0 },
-	{ 0x27, 0xfa },
-	{ 0x28, 0x20 }, /* DON'T set bit 6. It is for the OV7620 only */
-	{ 0x29, DFL_AUTO_EXP?0x00:0x80 },
-	{ 0x2a, 0x10 },
-	{ 0x2b, 0x00 },
-	{ 0x2c, 0x88 },
-	{ 0x2d, 0x95 },
-	{ 0x2e, 0x80 },
-	{ 0x2f, 0x44 },
-	{ 0x60, 0x20 },
-	{ 0x61, 0x02 },
-	{ 0x62, 0x5f },
-	{ 0x63, 0xd5 },
-	{ 0x64, 0x57 },
-	{ 0x65, 0x83 }, /* OV says "don't change this value" */
-	{ 0x66, 0x55 },
-	{ 0x67, 0x92 },
-	{ 0x68, 0xcf },
-	{ 0x69, 0x76 },
-	{ 0x6a, 0x22 },
-	{ 0x6b, 0xe2 },
-	{ 0x6c, 0x40 },
-	{ 0x6d, 0x48 },
-	{ 0x6e, 0x80 },
-	{ 0x6f, 0x0d },
-	{ 0x70, 0x89 },
-	{ 0x71, 0x00 },
-	{ 0x72, 0x14 },
-	{ 0x73, 0x54 },
-	{ 0x74, 0xa0 },
-	{ 0x75, 0x8e },
-	{ 0x76, 0x00 },
-	{ 0x77, 0xff },
-	{ 0x78, 0x80 },
-	{ 0x79, 0x80 },
-	{ 0x7a, 0x80 },
-	{ 0x7b, 0xe6 },
-	{ 0x7c, 0x00 },
-	{ 0x24, 0x3a },
-	{ 0x25, 0x60 },
-	{ 0xff, 0xff },	/* END MARKER */
-};
-
-/* Settings for (color) OV7620 camera chip */
-static struct ovcamchip_regvals regvals_init_7620[] = {
-	{ 0x12, 0x80 }, /* reset */
-	{ 0x00, OV7620_DFL_GAIN },
-	{ 0x01, 0x80 },
-	{ 0x02, 0x80 },
-	{ 0x03, OV7620_DFL_SAT },
-	{ 0x06, OV7620_DFL_BRIGHT },
-	{ 0x07, 0x00 },
-	{ 0x0c, 0x24 },
-	{ 0x0c, 0x24 },
-	{ 0x0d, 0x24 },
-	{ 0x11, 0x01 },
-	{ 0x12, 0x24 },
-	{ 0x13, DFL_AUTO_GAIN?0x01:0x00 },
-	{ 0x14, 0x84 },
-	{ 0x15, 0x01 },
-	{ 0x16, 0x03 },
-	{ 0x17, 0x2f },
-	{ 0x18, 0xcf },
-	{ 0x19, 0x06 },
-	{ 0x1a, 0xf5 },
-	{ 0x1b, 0x00 },
-	{ 0x20, 0x18 },
-	{ 0x21, 0x80 },
-	{ 0x22, 0x80 },
-	{ 0x23, 0x00 },
-	{ 0x26, 0xa2 },
-	{ 0x27, 0xea },
-	{ 0x28, 0x20 },
-	{ 0x29, DFL_AUTO_EXP?0x00:0x80 },
-	{ 0x2a, 0x10 },
-	{ 0x2b, 0x00 },
-	{ 0x2c, 0x88 },
-	{ 0x2d, 0x91 },
-	{ 0x2e, 0x80 },
-	{ 0x2f, 0x44 },
-	{ 0x60, 0x27 },
-	{ 0x61, 0x02 },
-	{ 0x62, 0x5f },
-	{ 0x63, 0xd5 },
-	{ 0x64, 0x57 },
-	{ 0x65, 0x83 },
-	{ 0x66, 0x55 },
-	{ 0x67, 0x92 },
-	{ 0x68, 0xcf },
-	{ 0x69, 0x76 },
-	{ 0x6a, 0x22 },
-	{ 0x6b, 0x00 },
-	{ 0x6c, 0x02 },
-	{ 0x6d, 0x44 },
-	{ 0x6e, 0x80 },
-	{ 0x6f, 0x1d },
-	{ 0x70, 0x8b },
-	{ 0x71, 0x00 },
-	{ 0x72, 0x14 },
-	{ 0x73, 0x54 },
-	{ 0x74, 0x00 },
-	{ 0x75, 0x8e },
-	{ 0x76, 0x00 },
-	{ 0x77, 0xff },
-	{ 0x78, 0x80 },
-	{ 0x79, 0x80 },
-	{ 0x7a, 0x80 },
-	{ 0x7b, 0xe2 },
-	{ 0x7c, 0x00 },
-	{ 0xff, 0xff },	/* END MARKER */
-};
-
-/* Returns index into the specified look-up table, with 'n' elements, for which
- * the value is greater than or equal to "val". If a match isn't found, (n-1)
- * is returned. The entries in the table must be in ascending order. */
-static inline int ov7x20_lut_find(unsigned char lut[], int n, unsigned char val)
-{
-	int i = 0;
-
-	while (lut[i] < val && i < n)
-		i++;
-
-	return i;
-}
-
-/* This initializes the OV7x20 camera chip and relevant variables. */
-static int ov7x20_init(struct i2c_client *c)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	struct ov7x20 *s;
-	int rc;
-
-	DDEBUG(4, &c->dev, "entered");
-
-	if (ov->mono)
-		rc = ov_write_regvals(c, regvals_init_7120);
-	else
-		rc = ov_write_regvals(c, regvals_init_7620);
-
-	if (rc < 0)
-		return rc;
-
-	ov->spriv = s = kzalloc(sizeof *s, GFP_KERNEL);
-	if (!s)
-		return -ENOMEM;
-
-	s->auto_brt = 1;
-	s->auto_exp = DFL_AUTO_EXP;
-	s->auto_gain = DFL_AUTO_GAIN;
-
-	return 0;
-}
-
-static int ov7x20_free(struct i2c_client *c)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-
-	kfree(ov->spriv);
-	return 0;
-}
-
-static int ov7x20_set_v4l1_control(struct i2c_client *c,
-				   struct ovcamchip_control *ctl)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	struct ov7x20 *s = ov->spriv;
-	int rc;
-	int v = ctl->value;
-
-	switch (ctl->id) {
-	case OVCAMCHIP_CID_CONT:
-	{
-		/* Use Y gamma control instead. Bit 0 enables it. */
-		rc = ov_write(c, 0x64, ctab[v >> 12]);
-		break;
-	}
-	case OVCAMCHIP_CID_BRIGHT:
-		/* 7620 doesn't like manual changes when in auto mode */
-		if (!s->auto_brt)
-			rc = ov_write(c, REG_BRT, v >> 8);
-		else
-			rc = 0;
-		break;
-	case OVCAMCHIP_CID_SAT:
-		rc = ov_write(c, REG_SAT, v >> 8);
-		break;
-	case OVCAMCHIP_CID_EXP:
-		if (!s->auto_exp)
-			rc = ov_write(c, REG_EXP, v);
-		else
-			rc = -EBUSY;
-		break;
-	case OVCAMCHIP_CID_FREQ:
-	{
-		int sixty = (v == 60);
-
-		rc = ov_write_mask(c, 0x2a, sixty?0x00:0x80, 0x80);
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write(c, 0x2b, sixty?0x00:0xac);
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write_mask(c, 0x76, 0x01, 0x01);
-		break;
-	}
-	case OVCAMCHIP_CID_BANDFILT:
-		rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
-		s->bandfilt = v;
-		break;
-	case OVCAMCHIP_CID_AUTOBRIGHT:
-		rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
-		s->auto_brt = v;
-		break;
-	case OVCAMCHIP_CID_AUTOEXP:
-		rc = ov_write_mask(c, 0x13, v?0x01:0x00, 0x01);
-		s->auto_exp = v;
-		break;
-	case OVCAMCHIP_CID_BACKLIGHT:
-	{
-		rc = ov_write_mask(c, 0x68, v?0xe0:0xc0, 0xe0);
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write_mask(c, 0x29, v?0x08:0x00, 0x08);
-		if (rc < 0)
-			goto out;
-
-		rc = ov_write_mask(c, 0x28, v?0x02:0x00, 0x02);
-		s->backlight = v;
-		break;
-	}
-	case OVCAMCHIP_CID_MIRROR:
-		rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
-		s->mirror = v;
-		break;
-	default:
-		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
-		return -EPERM;
-	}
-
-out:
-	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
-	return rc;
-}
-
-static int ov7x20_get_v4l1_control(struct i2c_client *c,
-				   struct ovcamchip_control *ctl)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	struct ov7x20 *s = ov->spriv;
-	int rc = 0;
-	unsigned char val = 0;
-
-	switch (ctl->id) {
-	case OVCAMCHIP_CID_CONT:
-		rc = ov_read(c, 0x64, &val);
-		ctl->value = ov7x20_lut_find(ctab, 16, val) << 12;
-		break;
-	case OVCAMCHIP_CID_BRIGHT:
-		rc = ov_read(c, REG_BRT, &val);
-		ctl->value = val << 8;
-		break;
-	case OVCAMCHIP_CID_SAT:
-		rc = ov_read(c, REG_SAT, &val);
-		ctl->value = val << 8;
-		break;
-	case OVCAMCHIP_CID_EXP:
-		rc = ov_read(c, REG_EXP, &val);
-		ctl->value = val;
-		break;
-	case OVCAMCHIP_CID_BANDFILT:
-		ctl->value = s->bandfilt;
-		break;
-	case OVCAMCHIP_CID_AUTOBRIGHT:
-		ctl->value = s->auto_brt;
-		break;
-	case OVCAMCHIP_CID_AUTOEXP:
-		ctl->value = s->auto_exp;
-		break;
-	case OVCAMCHIP_CID_BACKLIGHT:
-		ctl->value = s->backlight;
-		break;
-	case OVCAMCHIP_CID_MIRROR:
-		ctl->value = s->mirror;
-		break;
-	default:
-		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
-		return -EPERM;
-	}
-
-	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
-	return rc;
-}
-
-static int ov7x20_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	int qvga = win->quarter;
-
-	/******** QVGA-specific regs ********/
-	ov_write_mask(c, 0x14, qvga?0x20:0x00, 0x20);
-	ov_write_mask(c, 0x28, qvga?0x00:0x20, 0x20);
-	ov_write(c, 0x24, qvga?0x20:0x3a);
-	ov_write(c, 0x25, qvga?0x30:0x60);
-	ov_write_mask(c, 0x2d, qvga?0x40:0x00, 0x40);
-	if (!ov->mono)
-		ov_write_mask(c, 0x67, qvga?0xf0:0x90, 0xf0);
-	ov_write_mask(c, 0x74, qvga?0x20:0x00, 0x20);
-
-	/******** Clock programming ********/
-
-	ov_write(c, 0x11, win->clockdiv);
-
-	return 0;
-}
-
-static int ov7x20_set_window(struct i2c_client *c, struct ovcamchip_window *win)
-{
-	int ret, hwscale, vwscale;
-
-	ret = ov7x20_mode_init(c, win);
-	if (ret < 0)
-		return ret;
-
-	if (win->quarter) {
-		hwscale = 1;
-		vwscale = 0;
-	} else {
-		hwscale = 2;
-		vwscale = 1;
-	}
-
-	ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
-	ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
-	ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
-	ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));
-
-	return 0;
-}
-
-static int ov7x20_command(struct i2c_client *c, unsigned int cmd, void *arg)
-{
-	switch (cmd) {
-	case OVCAMCHIP_CMD_S_CTRL:
-		return ov7x20_set_v4l1_control(c, arg);
-	case OVCAMCHIP_CMD_G_CTRL:
-		return ov7x20_get_v4l1_control(c, arg);
-	case OVCAMCHIP_CMD_S_MODE:
-		return ov7x20_set_window(c, arg);
-	default:
-		DDEBUG(2, &c->dev, "command not supported: %d", cmd);
-		return -ENOIOCTLCMD;
-	}
-}
-
-struct ovcamchip_ops ov7x20_ops = {
-	.init    =	ov7x20_init,
-	.free    =	ov7x20_free,
-	.command =	ov7x20_command,
-};
diff --git a/drivers/media/video/ovcamchip/ovcamchip_core.c b/drivers/media/video/ovcamchip/ovcamchip_core.c
deleted file mode 100644
index d573d8428998..000000000000
--- a/drivers/media/video/ovcamchip/ovcamchip_core.c
+++ /dev/null
@@ -1,395 +0,0 @@
-/* Shared Code for OmniVision Camera Chip Drivers
- *
- * Copyright (c) 2004 Mark McClelland <mark@alpha.dyndns.org>
- * http://alpha.dyndns.org/ov511/
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
- */
-
-#define DEBUG
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-i2c-drv.h>
-#include "ovcamchip_priv.h"
-
-#define DRIVER_VERSION "v2.27 for Linux 2.6"
-#define DRIVER_AUTHOR "Mark McClelland <mark@alpha.dyndns.org>"
-#define DRIVER_DESC "OV camera chip I2C driver"
-
-#define PINFO(fmt, args...) printk(KERN_INFO "ovcamchip: " fmt "\n" , ## args);
-#define PERROR(fmt, args...) printk(KERN_ERR "ovcamchip: " fmt "\n" , ## args);
-
-#ifdef DEBUG
-int ovcamchip_debug = 0;
-static int debug;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug,
-  "Debug level: 0=none, 1=inits, 2=warning, 3=config, 4=functions, 5=all");
-#endif
-
-/* By default, let bridge driver tell us if chip is monochrome. mono=0
- * will ignore that and always treat chips as color. mono=1 will force
- * monochrome mode for all chips. */
-static int mono = -1;
-module_param(mono, int, 0);
-MODULE_PARM_DESC(mono,
-  "1=chips are monochrome (OVx1xx), 0=force color, -1=autodetect (default)");
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
-
-
-/* Registers common to all chips, that are needed for detection */
-#define GENERIC_REG_ID_HIGH       0x1C	/* manufacturer ID MSB */
-#define GENERIC_REG_ID_LOW        0x1D	/* manufacturer ID LSB */
-#define GENERIC_REG_COM_I         0x29	/* misc ID bits */
-
-static char *chip_names[NUM_CC_TYPES] = {
-	[CC_UNKNOWN]	= "Unknown chip",
-	[CC_OV76BE]	= "OV76BE",
-	[CC_OV7610]	= "OV7610",
-	[CC_OV7620]	= "OV7620",
-	[CC_OV7620AE]	= "OV7620AE",
-	[CC_OV6620]	= "OV6620",
-	[CC_OV6630]	= "OV6630",
-	[CC_OV6630AE]	= "OV6630AE",
-	[CC_OV6630AF]	= "OV6630AF",
-};
-
-/* ----------------------------------------------------------------------- */
-
-int ov_write_regvals(struct i2c_client *c, struct ovcamchip_regvals *rvals)
-{
-	int rc;
-
-	while (rvals->reg != 0xff) {
-		rc = ov_write(c, rvals->reg, rvals->val);
-		if (rc < 0)
-			return rc;
-		rvals++;
-	}
-
-	return 0;
-}
-
-/* Writes bits at positions specified by mask to an I2C reg. Bits that are in
- * the same position as 1's in "mask" are cleared and set to "value". Bits
- * that are in the same position as 0's in "mask" are preserved, regardless
- * of their respective state in "value".
- */
-int ov_write_mask(struct i2c_client *c,
-		  unsigned char reg,
-		  unsigned char value,
-		  unsigned char mask)
-{
-	int rc;
-	unsigned char oldval, newval;
-
-	if (mask == 0xff) {
-		newval = value;
-	} else {
-		rc = ov_read(c, reg, &oldval);
-		if (rc < 0)
-			return rc;
-
-		oldval &= (~mask);		/* Clear the masked bits */
-		value &= mask;			/* Enforce mask on value */
-		newval = oldval | value;	/* Set the desired bits */
-	}
-
-	return ov_write(c, reg, newval);
-}
-
-/* ----------------------------------------------------------------------- */
-
-/* Reset the chip and ensure that I2C is synchronized. Returns <0 if failure.
- */
-static int init_camchip(struct i2c_client *c)
-{
-	int i, success;
-	unsigned char high, low;
-
-	/* Reset the chip */
-	ov_write(c, 0x12, 0x80);
-
-	/* Wait for it to initialize */
-	msleep(150);
-
-	for (i = 0, success = 0; i < I2C_DETECT_RETRIES && !success; i++) {
-		if (ov_read(c, GENERIC_REG_ID_HIGH, &high) >= 0) {
-			if (ov_read(c, GENERIC_REG_ID_LOW, &low) >= 0) {
-				if (high == 0x7F && low == 0xA2) {
-					success = 1;
-					continue;
-				}
-			}
-		}
-
-		/* Reset the chip */
-		ov_write(c, 0x12, 0x80);
-
-		/* Wait for it to initialize */
-		msleep(150);
-
-		/* Dummy read to sync I2C */
-		ov_read(c, 0x00, &low);
-	}
-
-	if (!success)
-		return -EIO;
-
-	PDEBUG(1, "I2C synced in %d attempt(s)", i);
-
-	return 0;
-}
-
-/* This detects the OV7610, OV7620, or OV76BE chip. */
-static int ov7xx0_detect(struct i2c_client *c)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	int rc;
-	unsigned char val;
-
-	PDEBUG(4, "");
-
-	/* Detect chip (sub)type */
-	rc = ov_read(c, GENERIC_REG_COM_I, &val);
-	if (rc < 0) {
-		PERROR("Error detecting ov7xx0 type");
-		return rc;
-	}
-
-	if ((val & 3) == 3) {
-		PINFO("Camera chip is an OV7610");
-		ov->subtype = CC_OV7610;
-	} else if ((val & 3) == 1) {
-		rc = ov_read(c, 0x15, &val);
-		if (rc < 0) {
-			PERROR("Error detecting ov7xx0 type");
-			return rc;
-		}
-
-		if (val & 1) {
-			PINFO("Camera chip is an OV7620AE");
-			/* OV7620 is a close enough match for now. There are
-			 * some definite differences though, so this should be
-			 * fixed */
-			ov->subtype = CC_OV7620;
-		} else {
-			PINFO("Camera chip is an OV76BE");
-			ov->subtype = CC_OV76BE;
-		}
-	} else if ((val & 3) == 0) {
-		PINFO("Camera chip is an OV7620");
-		ov->subtype = CC_OV7620;
-	} else {
-		PERROR("Unknown camera chip version: %d", val & 3);
-		return -ENOSYS;
-	}
-
-	if (ov->subtype == CC_OV76BE)
-		ov->sops = &ov76be_ops;
-	else if (ov->subtype == CC_OV7620)
-		ov->sops = &ov7x20_ops;
-	else
-		ov->sops = &ov7x10_ops;
-
-	return 0;
-}
-
-/* This detects the OV6620, OV6630, OV6630AE, or OV6630AF chip. */
-static int ov6xx0_detect(struct i2c_client *c)
-{
-	struct ovcamchip *ov = i2c_get_clientdata(c);
-	int rc;
-	unsigned char val;
-
-	PDEBUG(4, "");
-
-	/* Detect chip (sub)type */
-	rc = ov_read(c, GENERIC_REG_COM_I, &val);
-	if (rc < 0) {
-		PERROR("Error detecting ov6xx0 type");
-		return -1;
-	}
-
-	if ((val & 3) == 0) {
-		ov->subtype = CC_OV6630;
-		PINFO("Camera chip is an OV6630");
-	} else if ((val & 3) == 1) {
-		ov->subtype = CC_OV6620;
-		PINFO("Camera chip is an OV6620");
-	} else if ((val & 3) == 2) {
-		ov->subtype = CC_OV6630;
-		PINFO("Camera chip is an OV6630AE");
-	} else if ((val & 3) == 3) {
-		ov->subtype = CC_OV6630;
-		PINFO("Camera chip is an OV6630AF");
-	}
-
-	if (ov->subtype == CC_OV6620)
-		ov->sops = &ov6x20_ops;
-	else
-		ov->sops = &ov6x30_ops;
-
-	return 0;
-}
-
-static int ovcamchip_detect(struct i2c_client *c)
-{
-	/* Ideally we would just try a single register write and see if it NAKs.
-	 * That isn't possible since the OV518 can't report I2C transaction
-	 * failures. So, we have to try to initialize the chip (i.e. reset it
-	 * and check the ID registers) to detect its presence. */
-
-	/* Test for 7xx0 */
-	PDEBUG(3, "Testing for 0V7xx0");
-	if (init_camchip(c) < 0)
-		return -ENODEV;
-	/* 7-bit addresses with bit 0 set are for the OV7xx0 */
-	if (c->addr & 1) {
-		if (ov7xx0_detect(c) < 0) {
-			PERROR("Failed to init OV7xx0");
-			return -EIO;
-		}
-		return 0;
-	}
-	/* Test for 6xx0 */
-	PDEBUG(3, "Testing for 0V6xx0");
-	if (ov6xx0_detect(c) < 0) {
-		PERROR("Failed to init OV6xx0");
-		return -EIO;
-	}
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static long ovcamchip_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
-{
-	struct ovcamchip *ov = to_ovcamchip(sd);
-	struct i2c_client *c = v4l2_get_subdevdata(sd);
-
-	if (!ov->initialized &&
-	    cmd != OVCAMCHIP_CMD_Q_SUBTYPE &&
-	    cmd != OVCAMCHIP_CMD_INITIALIZE) {
-		v4l2_err(sd, "Camera chip not initialized yet!\n");
-		return -EPERM;
-	}
-
-	switch (cmd) {
-	case OVCAMCHIP_CMD_Q_SUBTYPE:
-	{
-		*(int *)arg = ov->subtype;
-		return 0;
-	}
-	case OVCAMCHIP_CMD_INITIALIZE:
-	{
-		int rc;
-
-		if (mono == -1)
-			ov->mono = *(int *)arg;
-		else
-			ov->mono = mono;
-
-		if (ov->mono) {
-			if (ov->subtype != CC_OV7620)
-				v4l2_warn(sd, "Monochrome not "
-					"implemented for this chip\n");
-			else
-				v4l2_info(sd, "Initializing chip as "
-					"monochrome\n");
-		}
-
-		rc = ov->sops->init(c);
-		if (rc < 0)
-			return rc;
-
-		ov->initialized = 1;
-		return 0;
-	}
-	default:
-		return ov->sops->command(c, cmd, arg);
-	}
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_subdev_core_ops ovcamchip_core_ops = {
-	.ioctl = ovcamchip_ioctl,
-};
-
-static const struct v4l2_subdev_ops ovcamchip_ops = {
-	.core = &ovcamchip_core_ops,
-};
-
-static int ovcamchip_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
-{
-	struct ovcamchip *ov;
-	struct v4l2_subdev *sd;
-	int rc = 0;
-
-	ov = kzalloc(sizeof *ov, GFP_KERNEL);
-	if (!ov) {
-		rc = -ENOMEM;
-		goto no_ov;
-	}
-	sd = &ov->sd;
-	v4l2_i2c_subdev_init(sd, client, &ovcamchip_ops);
-
-	rc = ovcamchip_detect(client);
-	if (rc < 0)
-		goto error;
-
-	v4l_info(client, "%s found @ 0x%02x (%s)\n",
-			chip_names[ov->subtype], client->addr << 1, client->adapter->name);
-
-	PDEBUG(1, "Camera chip detection complete");
-
-	return rc;
-error:
-	kfree(ov);
-no_ov:
-	PDEBUG(1, "returning %d", rc);
-	return rc;
-}
-
-static int ovcamchip_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-	struct ovcamchip *ov = to_ovcamchip(sd);
-	int rc;
-
-	v4l2_device_unregister_subdev(sd);
-	rc = ov->sops->free(client);
-	if (rc < 0)
-		return rc;
-
-	kfree(ov);
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct i2c_device_id ovcamchip_id[] = {
-	{ "ovcamchip", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, ovcamchip_id);
-
-static struct v4l2_i2c_driver_data v4l2_i2c_data = {
-	.name = "ovcamchip",
-	.probe = ovcamchip_probe,
-	.remove = ovcamchip_remove,
-	.id_table = ovcamchip_id,
-};
diff --git a/drivers/media/video/ovcamchip/ovcamchip_priv.h b/drivers/media/video/ovcamchip/ovcamchip_priv.h
deleted file mode 100644
index 4f07b78c88bc..000000000000
--- a/drivers/media/video/ovcamchip/ovcamchip_priv.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/* OmniVision* camera chip driver private definitions for core code and
- * chip-specific code
- *
- * Copyright (c) 1999-2004 Mark McClelland
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
- *
- * * OmniVision is a trademark of OmniVision Technologies, Inc. This driver
- * is not sponsored or developed by them.
- */
-
-#ifndef __LINUX_OVCAMCHIP_PRIV_H
-#define __LINUX_OVCAMCHIP_PRIV_H
-
-#include <linux/i2c.h>
-#include <media/v4l2-subdev.h>
-#include <media/ovcamchip.h>
-
-#ifdef DEBUG
-extern int ovcamchip_debug;
-#endif
-
-#define PDEBUG(level, fmt, args...) \
-	if (ovcamchip_debug >= (level))	pr_debug("[%s:%d] " fmt "\n", \
-		__func__, __LINE__ , ## args)
-
-#define DDEBUG(level, dev, fmt, args...) \
-	if (ovcamchip_debug >= (level))	dev_dbg(dev, "[%s:%d] " fmt "\n", \
-		__func__, __LINE__ , ## args)
-
-/* Number of times to retry chip detection. Increase this if you are getting
- * "Failed to init camera chip" */
-#define I2C_DETECT_RETRIES	10
-
-struct ovcamchip_regvals {
-	unsigned char reg;
-	unsigned char val;
-};
-
-struct ovcamchip_ops {
-	int (*init)(struct i2c_client *);
-	int (*free)(struct i2c_client *);
-	int (*command)(struct i2c_client *, unsigned int, void *);
-};
-
-struct ovcamchip {
-	struct v4l2_subdev sd;
-	struct ovcamchip_ops *sops;
-	void *spriv;               /* Private data for OV7x10.c etc... */
-	int subtype;               /* = SEN_OV7610 etc... */
-	int mono;                  /* Monochrome chip? (invalid until init) */
-	int initialized;           /* OVCAMCHIP_CMD_INITIALIZE was successful */
-};
-
-static inline struct ovcamchip *to_ovcamchip(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct ovcamchip, sd);
-}
-
-extern struct ovcamchip_ops ov6x20_ops;
-extern struct ovcamchip_ops ov6x30_ops;
-extern struct ovcamchip_ops ov7x10_ops;
-extern struct ovcamchip_ops ov7x20_ops;
-extern struct ovcamchip_ops ov76be_ops;
-
-/* --------------------------------- */
-/*              I2C I/O              */
-/* --------------------------------- */
-
-static inline int ov_read(struct i2c_client *c, unsigned char reg,
-			  unsigned char *value)
-{
-	int rc;
-
-	rc = i2c_smbus_read_byte_data(c, reg);
-	*value = (unsigned char) rc;
-	return rc;
-}
-
-static inline int ov_write(struct i2c_client *c, unsigned char reg,
-			   unsigned char value )
-{
-	return i2c_smbus_write_byte_data(c, reg, value);
-}
-
-/* --------------------------------- */
-/*        FUNCTION PROTOTYPES        */
-/* --------------------------------- */
-
-/* Functions in ovcamchip_core.c */
-
-extern int ov_write_regvals(struct i2c_client *c,
-			    struct ovcamchip_regvals *rvals);
-
-extern int ov_write_mask(struct i2c_client *c, unsigned char reg,
-			 unsigned char value, unsigned char mask);
-
-#endif