Merge branch 'Preparing-for-phylib-linkmodes'

Andrew Lunn says:

====================
Preparing for phylib linkmodes

phylib currently makes us of a u32 bitmap for advertising, supported,
and link partner capabilities. For a long time, this has been
sufficient, for devices up to 1Gbps. With more MAC/PHY combinations
now supporting speeds greater than 1Gbps, we have run out of
bits. There is the need to replace this u32 with an
__ETHTOOL_DECLARE_LINK_MODE_MASK, which makes use of linux's generic
bitmaps.

This patchset does some of the work preparing for this change. A few
cleanups are applied to PHY drivers. Some MAC drivers directly access
members of phydev which are going to change type. These patches adds
some helpers and swaps MAC drivers to use them, mostly dealing with
Pause configuration.

v3:
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Add missing at in commit message
Change Subject of patch 5
Fix return in from phy_set_asym_pause
Fix kerneldoc in phy_set_pause

v2:
Fixup bad indentation in tg3.c
Rename phy_support_pause() to phy_support_sym_pause()
Also trigger autoneg if the advertising settings have changed.
Rename phy_set_pause() to phy_set_sym_pause()
Use the bcm63xx_enet.c logic, not fec_main.c for validating pause
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

47 files changed, 259 insertions, 344 deletions

diff --git a/drivers/net/ethernet/8390/ax88796.c b/drivers/net/ethernet/8390/ax88796.c
index 2a0ddec1dd56..3dcc61821ed5 100644
--- a/drivers/net/ethernet/8390/ax88796.c
+++ b/drivers/net/ethernet/8390/ax88796.c
@@ -377,9 +377,7 @@ static int ax_mii_probe(struct net_device *dev)
 		return ret;
 	}
 
-	/* mask with MAC supported features */
-	phy_dev->supported &= PHY_BASIC_FEATURES;
-	phy_dev->advertising = phy_dev->supported;
+	phy_set_max_speed(phy_dev, SPEED_100);
 
 	netdev_info(dev, "PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
 		    phy_dev->drv->name, phydev_name(phy_dev), phy_dev->irq);
diff --git a/drivers/net/ethernet/aeroflex/greth.c b/drivers/net/ethernet/aeroflex/greth.c
index 4309be3724ad..7c9348a26cbb 100644
--- a/drivers/net/ethernet/aeroflex/greth.c
+++ b/drivers/net/ethernet/aeroflex/greth.c
@@ -1279,9 +1279,9 @@ static int greth_mdio_probe(struct net_device *dev)
 	}
 
 	if (greth->gbit_mac)
-		phy->supported &= PHY_GBIT_FEATURES;
+		phy_set_max_speed(phy, SPEED_1000);
 	else
-		phy->supported &= PHY_BASIC_FEATURES;
+		phy_set_max_speed(phy, SPEED_100);
 
 	phy->advertising = phy->supported;
 
diff --git a/drivers/net/ethernet/agere/et131x.c b/drivers/net/ethernet/agere/et131x.c
index 48220b6c600d..ea34bcb868b5 100644
--- a/drivers/net/ethernet/agere/et131x.c
+++ b/drivers/net/ethernet/agere/et131x.c
@@ -3258,19 +3258,11 @@ static int et131x_mii_probe(struct net_device *netdev)
 		return PTR_ERR(phydev);
 	}
 
-	phydev->supported &= (SUPPORTED_10baseT_Half |
-			      SUPPORTED_10baseT_Full |
-			      SUPPORTED_100baseT_Half |
-			      SUPPORTED_100baseT_Full |
-			      SUPPORTED_Autoneg |
-			      SUPPORTED_MII |
-			      SUPPORTED_TP);
+	phy_set_max_speed(phydev, SPEED_100);
 
 	if (adapter->pdev->device != ET131X_PCI_DEVICE_ID_FAST)
-		phydev->supported |= SUPPORTED_1000baseT_Half |
-				     SUPPORTED_1000baseT_Full;
+		phy_set_max_speed(phydev, SPEED_1000);
 
-	phydev->advertising = phydev->supported;
 	phydev->autoneg = AUTONEG_ENABLE;
 
 	phy_attached_info(phydev);
diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c
index 3143de45baaa..e1acafa82214 100644
--- a/drivers/net/ethernet/allwinner/sun4i-emac.c
+++ b/drivers/net/ethernet/allwinner/sun4i-emac.c
@@ -172,8 +172,7 @@ static int emac_mdio_probe(struct net_device *dev)
 	}
 
 	/* mask with MAC supported features */
-	phydev->supported &= PHY_BASIC_FEATURES;
-	phydev->advertising = phydev->supported;
+	phy_set_max_speed(phydev, SPEED_100);
 
 	db->link = 0;
 	db->speed = 0;
diff --git a/drivers/net/ethernet/altera/altera_tse_main.c b/drivers/net/ethernet/altera/altera_tse_main.c
index baca8f704a45..02921d877c08 100644
--- a/drivers/net/ethernet/altera/altera_tse_main.c
+++ b/drivers/net/ethernet/altera/altera_tse_main.c
@@ -835,13 +835,10 @@ static int init_phy(struct net_device *dev)
 	}
 
 	/* Stop Advertising 1000BASE Capability if interface is not GMII
-	 * Note: Checkpatch throws CHECKs for the camel case defines below,
-	 * it's ok to ignore.
 	 */
 	if ((priv->phy_iface == PHY_INTERFACE_MODE_MII) ||
 	    (priv->phy_iface == PHY_INTERFACE_MODE_RMII))
-		phydev->advertising &= ~(SUPPORTED_1000baseT_Half |
-					 SUPPORTED_1000baseT_Full);
+		phy_set_max_speed(phydev, SPEED_100);
 
 	/* Broken HW is sometimes missing the pull-up resistor on the
 	 * MDIO line, which results in reads to non-existent devices returning
diff --git a/drivers/net/ethernet/amd/au1000_eth.c b/drivers/net/ethernet/amd/au1000_eth.c
index 73ca8879ada7..7c1eb304c27e 100644
--- a/drivers/net/ethernet/amd/au1000_eth.c
+++ b/drivers/net/ethernet/amd/au1000_eth.c
@@ -564,17 +564,7 @@ static int au1000_mii_probe(struct net_device *dev)
 		return PTR_ERR(phydev);
 	}
 
-	/* mask with MAC supported features */
-	phydev->supported &= (SUPPORTED_10baseT_Half
-			      | SUPPORTED_10baseT_Full
-			      | SUPPORTED_100baseT_Half
-			      | SUPPORTED_100baseT_Full
-			      | SUPPORTED_Autoneg
-			      /* | SUPPORTED_Pause | SUPPORTED_Asym_Pause */
-			      | SUPPORTED_MII
-			      | SUPPORTED_TP);
-
-	phydev->advertising = phydev->supported;
+	phy_set_max_speed(phydev, SPEED_100);
 
 	aup->old_link = 0;
 	aup->old_speed = 0;
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
index 3ceb4f95ca7c..289129011b9f 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
@@ -879,8 +879,8 @@ static bool xgbe_phy_finisar_phy_quirks(struct xgbe_prv_data *pdata)
 	phy_write(phy_data->phydev, 0x00, 0x9140);
 
 	phy_data->phydev->supported = PHY_GBIT_FEATURES;
-	phy_data->phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
 	phy_data->phydev->advertising = phy_data->phydev->supported;
+	phy_support_asym_pause(phy_data->phydev);
 
 	netif_dbg(pdata, drv, pdata->netdev,
 		  "Finisar PHY quirk in place\n");
@@ -951,8 +951,8 @@ static bool xgbe_phy_belfuse_phy_quirks(struct xgbe_prv_data *pdata)
 	phy_write(phy_data->phydev, 0x00, reg & ~0x00800);
 
 	phy_data->phydev->supported = PHY_GBIT_FEATURES;
-	phy_data->phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
 	phy_data->phydev->advertising = phy_data->phydev->supported;
+	phy_support_asym_pause(phy_data->phydev);
 
 	netif_dbg(pdata, drv, pdata->netdev,
 		  "BelFuse PHY quirk in place\n");
diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_ethtool.c b/drivers/net/ethernet/apm/xgene/xgene_enet_ethtool.c
index 4f50f11718f4..78dd09b5beeb 100644
--- a/drivers/net/ethernet/apm/xgene/xgene_enet_ethtool.c
+++ b/drivers/net/ethernet/apm/xgene/xgene_enet_ethtool.c
@@ -306,45 +306,25 @@ static int xgene_set_pauseparam(struct net_device *ndev,
 {
 	struct xgene_enet_pdata *pdata = netdev_priv(ndev);
 	struct phy_device *phydev = ndev->phydev;
-	u32 oldadv, newadv;
 
 	if (phy_interface_mode_is_rgmii(pdata->phy_mode) ||
 	    pdata->phy_mode == PHY_INTERFACE_MODE_SGMII) {
 		if (!phydev)
 			return -EINVAL;
 
-		if (!(phydev->supported & SUPPORTED_Pause) ||
-		    (!(phydev->supported & SUPPORTED_Asym_Pause) &&
-		     pp->rx_pause != pp->tx_pause))
+		if (!phy_validate_pause(phydev, pp))
 			return -EINVAL;
 
 		pdata->pause_autoneg = pp->autoneg;
 		pdata->tx_pause = pp->tx_pause;
 		pdata->rx_pause = pp->rx_pause;
 
-		oldadv = phydev->advertising;
-		newadv = oldadv & ~(ADVERTISED_Pause | ADVERTISED_Asym_Pause);
+		phy_set_asym_pause(phydev, pp->rx_pause,  pp->tx_pause);
 
-		if (pp->rx_pause)
-			newadv |= ADVERTISED_Pause | ADVERTISED_Asym_Pause;
-
-		if (pp->tx_pause)
-			newadv ^= ADVERTISED_Asym_Pause;
-
-		if (oldadv ^ newadv) {
-			phydev->advertising = newadv;
-
-			if (phydev->autoneg)
-				return phy_start_aneg(phydev);
-
-			if (!pp->autoneg) {
-				pdata->mac_ops->flowctl_tx(pdata,
-							   pdata->tx_pause);
-				pdata->mac_ops->flowctl_rx(pdata,
-							   pdata->rx_pause);
-			}
+		if (!pp->autoneg) {
+			pdata->mac_ops->flowctl_tx(pdata, pdata->tx_pause);
+			pdata->mac_ops->flowctl_rx(pdata, pdata->rx_pause);
 		}
-
 	} else {
 		if (pp->autoneg)
 			return -EINVAL;
diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c
index 078a04dc1182..e3560311711a 100644
--- a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c
+++ b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c
@@ -895,12 +895,10 @@ int xgene_enet_phy_connect(struct net_device *ndev)
 	}
 
 	pdata->phy_speed = SPEED_UNKNOWN;
-	phy_dev->supported &= ~SUPPORTED_10baseT_Half &
-			      ~SUPPORTED_100baseT_Half &
-			      ~SUPPORTED_1000baseT_Half;
-	phy_dev->supported |= SUPPORTED_Pause |
-			      SUPPORTED_Asym_Pause;
-	phy_dev->advertising = phy_dev->supported;
+	phy_remove_link_mode(phy_dev, ETHTOOL_LINK_MODE_10baseT_Half_BIT);
+	phy_remove_link_mode(phy_dev, ETHTOOL_LINK_MODE_100baseT_Half_BIT);
+	phy_remove_link_mode(phy_dev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
+	phy_support_asym_pause(phy_dev);
 
 	return 0;
 }
diff --git a/drivers/net/ethernet/aurora/nb8800.c b/drivers/net/ethernet/aurora/nb8800.c
index c8d1f8fa4713..6f56276015a4 100644
--- a/drivers/net/ethernet/aurora/nb8800.c
+++ b/drivers/net/ethernet/aurora/nb8800.c
@@ -935,18 +935,11 @@ static void nb8800_pause_adv(struct net_device *dev)
 {
 	struct nb8800_priv *priv = netdev_priv(dev);
 	struct phy_device *phydev = dev->phydev;
-	u32 adv = 0;
 
 	if (!phydev)
 		return;
 
-	if (priv->pause_rx)
-		adv |= ADVERTISED_Pause | ADVERTISED_Asym_Pause;
-	if (priv->pause_tx)
-		adv ^= ADVERTISED_Asym_Pause;
-
-	phydev->supported |= adv;
-	phydev->advertising |= adv;
+	phy_set_asym_pause(phydev, priv->pause_rx, priv->pause_tx);
 }
 
 static int nb8800_open(struct net_device *dev)
diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.c b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
index 897302adc38e..02e7dfc1a2ef 100644
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
@@ -890,19 +890,10 @@ static int bcm_enet_open(struct net_device *dev)
 		}
 
 		/* mask with MAC supported features */
-		phydev->supported &= (SUPPORTED_10baseT_Half |
-				      SUPPORTED_10baseT_Full |
-				      SUPPORTED_100baseT_Half |
-				      SUPPORTED_100baseT_Full |
-				      SUPPORTED_Autoneg |
-				      SUPPORTED_Pause |
-				      SUPPORTED_MII);
-		phydev->advertising = phydev->supported;
-
-		if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
-			phydev->advertising |= SUPPORTED_Pause;
-		else
-			phydev->advertising &= ~SUPPORTED_Pause;
+		phy_support_sym_pause(phydev);
+		phy_set_max_speed(phydev, SPEED_100);
+		phy_set_sym_pause(phydev, priv->pause_rx, priv->pause_rx,
+				  priv->pause_auto);
 
 		phy_attached_info(phydev);
 
diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index 4241ae928d4a..b756fc79424e 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -214,7 +214,7 @@ int bcmgenet_mii_config(struct net_device *dev, bool init)
 
 	case PHY_INTERFACE_MODE_MII:
 		phy_name = "external MII";
-		phydev->supported &= PHY_BASIC_FEATURES;
+		phy_set_max_speed(phydev, SPEED_100);
 		bcmgenet_sys_writel(priv,
 				    PORT_MODE_EXT_EPHY, SYS_PORT_CTRL);
 		break;
@@ -226,11 +226,10 @@ int bcmgenet_mii_config(struct net_device *dev, bool init)
 		 * capabilities, use that knowledge to also configure the
 		 * Reverse MII interface correctly.
 		 */
-		if ((dev->phydev->supported & PHY_BASIC_FEATURES) ==
-				PHY_BASIC_FEATURES)
-			port_ctrl = PORT_MODE_EXT_RVMII_25;
-		else
+		if (dev->phydev->supported & PHY_1000BT_FEATURES)
 			port_ctrl = PORT_MODE_EXT_RVMII_50;
+		else
+			port_ctrl = PORT_MODE_EXT_RVMII_25;
 		bcmgenet_sys_writel(priv, port_ctrl, SYS_PORT_CTRL);
 		break;
 
diff --git a/drivers/net/ethernet/broadcom/sb1250-mac.c b/drivers/net/ethernet/broadcom/sb1250-mac.c
index ef4a0c326736..53acbbb36637 100644
--- a/drivers/net/ethernet/broadcom/sb1250-mac.c
+++ b/drivers/net/ethernet/broadcom/sb1250-mac.c
@@ -2357,21 +2357,11 @@ static int sbmac_mii_probe(struct net_device *dev)
 	}
 
 	/* Remove any features not supported by the controller */
-	phy_dev->supported &= SUPPORTED_10baseT_Half |
-			      SUPPORTED_10baseT_Full |
-			      SUPPORTED_100baseT_Half |
-			      SUPPORTED_100baseT_Full |
-			      SUPPORTED_1000baseT_Half |
-			      SUPPORTED_1000baseT_Full |
-			      SUPPORTED_Autoneg |
-			      SUPPORTED_MII |
-			      SUPPORTED_Pause |
-			      SUPPORTED_Asym_Pause;
+	phy_set_max_speed(phy_dev, SPEED_1000);
+	phy_support_asym_pause(phy_dev);
 
 	phy_attached_info(phy_dev);
 
-	phy_dev->advertising = phy_dev->supported;
-
 	sc->phy_dev = phy_dev;
 
 	return 0;
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index e6f28c7942ab..fb0e458e25b7 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -2122,16 +2122,14 @@ static int tg3_phy_init(struct tg3 *tp)
 	case PHY_INTERFACE_MODE_GMII:
 	case PHY_INTERFACE_MODE_RGMII:
 		if (!(tp->phy_flags & TG3_PHYFLG_10_100_ONLY)) {
-			phydev->supported &= (PHY_GBIT_FEATURES |
-					      SUPPORTED_Pause |
-					      SUPPORTED_Asym_Pause);
+			phy_set_max_speed(phydev, SPEED_1000);
+			phy_support_asym_pause(phydev);
 			break;
 		}
 		/* fallthru */
 	case PHY_INTERFACE_MODE_MII:
-		phydev->supported &= (PHY_BASIC_FEATURES |
-				      SUPPORTED_Pause |
-				      SUPPORTED_Asym_Pause);
+		phy_set_max_speed(phydev, SPEED_100);
+		phy_support_asym_pause(phydev);
 		break;
 	default:
 		phy_disconnect(mdiobus_get_phy(tp->mdio_bus, tp->phy_addr));
@@ -2140,8 +2138,6 @@ static int tg3_phy_init(struct tg3 *tp)
 
 	tp->phy_flags |= TG3_PHYFLG_IS_CONNECTED;
 
-	phydev->advertising = phydev->supported;
-
 	phy_attached_info(phydev);
 
 	return 0;
@@ -12496,31 +12492,24 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam
 		tg3_warn_mgmt_link_flap(tp);
 
 	if (tg3_flag(tp, USE_PHYLIB)) {
-		u32 newadv;
 		struct phy_device *phydev;
 
 		phydev = mdiobus_get_phy(tp->mdio_bus, tp->phy_addr);
 
-		if (!(phydev->supported & SUPPORTED_Pause) ||
-		    (!(phydev->supported & SUPPORTED_Asym_Pause) &&
-		     (epause->rx_pause != epause->tx_pause)))
+		if (!phy_validate_pause(phydev, epause))
 			return -EINVAL;
 
 		tp->link_config.flowctrl = 0;
+		phy_set_asym_pause(phydev, epause->rx_pause, epause->tx_pause);
 		if (epause->rx_pause) {
 			tp->link_config.flowctrl |= FLOW_CTRL_RX;
 
 			if (epause->tx_pause) {
 				tp->link_config.flowctrl |= FLOW_CTRL_TX;
-				newadv = ADVERTISED_Pause;
-			} else
-				newadv = ADVERTISED_Pause |
-					 ADVERTISED_Asym_Pause;
+			}
 		} else if (epause->tx_pause) {
 			tp->link_config.flowctrl |= FLOW_CTRL_TX;
-			newadv = ADVERTISED_Asym_Pause;
-		} else
-			newadv = 0;
+		}
 
 		if (epause->autoneg)
 			tg3_flag_set(tp, PAUSE_AUTONEG);
@@ -12528,33 +12517,19 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam
 			tg3_flag_clear(tp, PAUSE_AUTONEG);
 
 		if (tp->phy_flags & TG3_PHYFLG_IS_CONNECTED) {
-			u32 oldadv = phydev->advertising &
-				     (ADVERTISED_Pause | ADVERTISED_Asym_Pause);
-			if (oldadv != newadv) {
-				phydev->advertising &=
-					~(ADVERTISED_Pause |
-					  ADVERTISED_Asym_Pause);
-				phydev->advertising |= newadv;
-				if (phydev->autoneg) {
-					/*
-					 * Always renegotiate the link to
-					 * inform our link partner of our
-					 * flow control settings, even if the
-					 * flow control is forced.  Let
-					 * tg3_adjust_link() do the final
-					 * flow control setup.
-					 */
-					return phy_start_aneg(phydev);
-				}
+			if (phydev->autoneg) {
+				/* phy_set_asym_pause() will
+				 * renegotiate the link to inform our
+				 * link partner of our flow control
+				 * settings, even if the flow control
+				 * is forced.  Let tg3_adjust_link()
+				 * do the final flow control setup.
+				 */
+				return 0;
 			}
 
 			if (!epause->autoneg)
 				tg3_setup_flow_control(tp, 0, 0);
-		} else {
-			tp->link_config.advertising &=
-					~(ADVERTISED_Pause |
-					  ADVERTISED_Asym_Pause);
-			tp->link_config.advertising |= newadv;
 		}
 	} else {
 		int irq_sync = 0;
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 16e4ef7d7185..96ae8c992810 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -544,14 +544,13 @@ static int macb_mii_probe(struct net_device *dev)
 
 	/* mask with MAC supported features */
 	if (macb_is_gem(bp) && bp->caps & MACB_CAPS_GIGABIT_MODE_AVAILABLE)
-		phydev->supported &= PHY_GBIT_FEATURES;
+		phy_set_max_speed(phydev, SPEED_1000);
 	else
-		phydev->supported &= PHY_BASIC_FEATURES;
+		phy_set_max_speed(phydev, SPEED_100);
 
 	if (bp->caps & MACB_CAPS_NO_GIGABIT_HALF)
-		phydev->supported &= ~SUPPORTED_1000baseT_Half;
-
-	phydev->advertising = phydev->supported;
+		phy_remove_link_mode(phydev,
+				     ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
 
 	bp->link = 0;
 	bp->speed = 0;
diff --git a/drivers/net/ethernet/cortina/gemini.c b/drivers/net/ethernet/cortina/gemini.c
index 1c9ad3630c77..ceec467f590d 100644
--- a/drivers/net/ethernet/cortina/gemini.c
+++ b/drivers/net/ethernet/cortina/gemini.c
@@ -372,9 +372,8 @@ static int gmac_setup_phy(struct net_device *netdev)
 		return -ENODEV;
 	netdev->phydev = phy;
 
-	phy->supported &= PHY_GBIT_FEATURES;
-	phy->supported |= SUPPORTED_Asym_Pause | SUPPORTED_Pause;
-	phy->advertising = phy->supported;
+	phy_set_max_speed(phy, SPEED_1000);
+	phy_support_asym_pause(phy);
 
 	/* set PHY interface type */
 	switch (phy->interface) {
diff --git a/drivers/net/ethernet/dnet.c b/drivers/net/ethernet/dnet.c
index 5a847941c46b..79521e27f0d1 100644
--- a/drivers/net/ethernet/dnet.c
+++ b/drivers/net/ethernet/dnet.c
@@ -284,13 +284,11 @@ static int dnet_mii_probe(struct net_device *dev)
 
 	/* mask with MAC supported features */
 	if (bp->capabilities & DNET_HAS_GIGABIT)
-		phydev->supported &= PHY_GBIT_FEATURES;
+		phy_set_max_speed(phydev, SPEED_1000);
 	else
-		phydev->supported &= PHY_BASIC_FEATURES;
+		phy_set_max_speed(phydev, SPEED_100);
 
-	phydev->supported |= SUPPORTED_Asym_Pause | SUPPORTED_Pause;
-
-	phydev->advertising = phydev->supported;
+	phy_support_asym_pause(phydev);
 
 	bp->link = 0;
 	bp->speed = 0;
diff --git a/drivers/net/ethernet/ethoc.c b/drivers/net/ethernet/ethoc.c
index 60da0499ad66..0f3e7f21c6fa 100644
--- a/drivers/net/ethernet/ethoc.c
+++ b/drivers/net/ethernet/ethoc.c
@@ -721,10 +721,7 @@ static int ethoc_mdio_probe(struct net_device *dev)
 		return err;
 	}
 
-	phy->advertising &= ~(ADVERTISED_1000baseT_Full |
-			      ADVERTISED_1000baseT_Half);
-	phy->supported &= ~(SUPPORTED_1000baseT_Full |
-			    SUPPORTED_1000baseT_Half);
+	phy_set_max_speed(phy, SPEED_100);
 
 	return 0;
 }
diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index ed6c76d20b45..d8ead7e4177e 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -1079,8 +1079,7 @@ static int ftgmac100_mii_probe(struct ftgmac100 *priv, phy_interface_t intf)
 	/* Indicate that we support PAUSE frames (see comment in
 	 * Documentation/networking/phy.txt)
 	 */
-	phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
-	phydev->advertising = phydev->supported;
+	phy_support_asym_pause(phydev);
 
 	/* Display what we found */
 	phy_attached_info(phydev);
@@ -1220,22 +1219,11 @@ static int ftgmac100_set_pauseparam(struct net_device *netdev,
 	priv->tx_pause = pause->tx_pause;
 	priv->rx_pause = pause->rx_pause;
 
-	if (phydev) {
-		phydev->advertising &= ~ADVERTISED_Pause;
-		phydev->advertising &= ~ADVERTISED_Asym_Pause;
+	if (phydev)
+		phy_set_asym_pause(phydev, pause->rx_pause, pause->tx_pause);
 
-		if (pause->rx_pause) {
-			phydev->advertising |= ADVERTISED_Pause;
-			phydev->advertising |= ADVERTISED_Asym_Pause;
-		}
-
-		if (pause->tx_pause)
-			phydev->advertising ^= ADVERTISED_Asym_Pause;
-	}
 	if (netif_running(netdev)) {
-		if (phydev && priv->aneg_pause)
-			phy_start_aneg(phydev);
-		else
+		if (!(phydev && priv->aneg_pause))
 			ftgmac100_config_pause(priv);
 	}
 
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 783134f1b779..a5131a510e8b 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -2491,8 +2491,7 @@ static int dpaa_phy_init(struct net_device *net_dev)
 
 	/* Remove any features not supported by the controller */
 	phy_dev->supported &= mac_dev->if_support;
-	phy_dev->supported |= (SUPPORTED_Pause | SUPPORTED_Asym_Pause);
-	phy_dev->advertising = phy_dev->supported;
+	phy_support_asym_pause(phy_dev);
 
 	mac_dev->phy_dev = phy_dev;
 	net_dev->phydev = phy_dev;
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c b/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
index 3184c8f7cdd0..5d0fdf667b82 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
@@ -194,9 +194,7 @@ static int dpaa_set_pauseparam(struct net_device *net_dev,
 		return -ENODEV;
 	}
 
-	if (!(phydev->supported & SUPPORTED_Pause) ||
-	    (!(phydev->supported & SUPPORTED_Asym_Pause) &&
-	    (epause->rx_pause != epause->tx_pause)))
+	if (!phy_validate_pause(phydev, epause))
 		return -EINVAL;
 
 	/* The MAC should know how to handle PAUSE frame autonegotiation before
@@ -210,29 +208,8 @@ static int dpaa_set_pauseparam(struct net_device *net_dev,
 	/* Determine the sym/asym advertised PAUSE capabilities from the desired
 	 * rx/tx pause settings.
 	 */
-	newadv = 0;
-	if (epause->rx_pause)
-		newadv = ADVERTISED_Pause | ADVERTISED_Asym_Pause;
-	if (epause->tx_pause)
-		newadv ^= ADVERTISED_Asym_Pause;
 
-	oldadv = phydev->advertising &
-			(ADVERTISED_Pause | ADVERTISED_Asym_Pause);
-
-	/* If there are differences between the old and the new advertised
-	 * values, restart PHY autonegotiation and advertise the new values.
-	 */
-	if (oldadv != newadv) {
-		phydev->advertising &= ~(ADVERTISED_Pause
-				| ADVERTISED_Asym_Pause);
-		phydev->advertising |= newadv;
-		if (phydev->autoneg) {
-			err = phy_start_aneg(phydev);
-			if (err < 0)
-				netdev_err(net_dev, "phy_start_aneg() = %d\n",
-					   err);
-		}
-	}
+	phy_set_asym_pause(phydev, epause->rx_pause, epause->tx_pause);
 
 	fman_get_pause_cfg(mac_dev, &rx_pause, &tx_pause);
 	err = fman_set_mac_active_pause(mac_dev, rx_pause, tx_pause);
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 2708297e7795..2e0bb90131b6 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -1946,16 +1946,15 @@ static int fec_enet_mii_probe(struct net_device *ndev)
 
 	/* mask with MAC supported features */
 	if (fep->quirks & FEC_QUIRK_HAS_GBIT) {
-		phy_dev->supported &= PHY_GBIT_FEATURES;
-		phy_dev->supported &= ~SUPPORTED_1000baseT_Half;
+		phy_set_max_speed(phy_dev, 1000);
+		phy_remove_link_mode(phy_dev,
+				     ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
 #if !defined(CONFIG_M5272)
-		phy_dev->supported |= SUPPORTED_Pause;
+		phy_support_sym_pause(phy_dev);
 #endif
 	}
 	else
-		phy_dev->supported &= PHY_BASIC_FEATURES;
-
-	phy_dev->advertising = phy_dev->supported;
+		phy_set_max_speed(phy_dev, 100);
 
 	fep->link = 0;
 	fep->full_duplex = 0;
@@ -2230,13 +2229,8 @@ static int fec_enet_set_pauseparam(struct net_device *ndev,
 	fep->pause_flag |= pause->rx_pause ? FEC_PAUSE_FLAG_ENABLE : 0;
 	fep->pause_flag |= pause->autoneg ? FEC_PAUSE_FLAG_AUTONEG : 0;
 
-	if (pause->rx_pause || pause->autoneg) {
-		ndev->phydev->supported |= ADVERTISED_Pause;
-		ndev->phydev->advertising |= ADVERTISED_Pause;
-	} else {
-		ndev->phydev->supported &= ~ADVERTISED_Pause;
-		ndev->phydev->advertising &= ~ADVERTISED_Pause;
-	}
+	phy_set_sym_pause(ndev->phydev, pause->rx_pause, pause->tx_pause,
+			  pause->autoneg);
 
 	if (pause->autoneg) {
 		if (netif_running(ndev))
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index f27f9bae1a4a..40a1a87cd338 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -1814,8 +1814,8 @@ static int init_phy(struct net_device *dev)
 	phydev->supported &= (GFAR_SUPPORTED | gigabit_support);
 	phydev->advertising = phydev->supported;
 
-	/* Add support for flow control, but don't advertise it by default */
-	phydev->supported |= (SUPPORTED_Pause | SUPPORTED_Asym_Pause);
+	/* Add support for flow control */
+	phy_support_asym_pause(phydev);
 
 	/* disable EEE autoneg, EEE not supported by eTSEC */
 	memset(&edata, 0, sizeof(struct ethtool_eee));
diff --git a/drivers/net/ethernet/freescale/gianfar_ethtool.c b/drivers/net/ethernet/freescale/gianfar_ethtool.c
index 395a5266ea30..d3662965f59d 100644
--- a/drivers/net/ethernet/freescale/gianfar_ethtool.c
+++ b/drivers/net/ethernet/freescale/gianfar_ethtool.c
@@ -503,65 +503,44 @@ static int gfar_spauseparam(struct net_device *dev,
 	struct gfar_private *priv = netdev_priv(dev);
 	struct phy_device *phydev = dev->phydev;
 	struct gfar __iomem *regs = priv->gfargrp[0].regs;
-	u32 oldadv, newadv;
 
 	if (!phydev)
 		return -ENODEV;
 
-	if (!(phydev->supported & SUPPORTED_Pause) ||
-	    (!(phydev->supported & SUPPORTED_Asym_Pause) &&
-	     (epause->rx_pause != epause->tx_pause)))
+	if (!phy_validate_pause(phydev, epause))
 		return -EINVAL;
 
 	priv->rx_pause_en = priv->tx_pause_en = 0;
+	phy_set_asym_pause(phydev, epause->rx_pause, epause->tx_pause);
 	if (epause->rx_pause) {
 		priv->rx_pause_en = 1;
 
 		if (epause->tx_pause) {
 			priv->tx_pause_en = 1;
-			/* FLOW_CTRL_RX & TX */
-			newadv = ADVERTISED_Pause;
-		} else  /* FLOW_CTLR_RX */
-			newadv = ADVERTISED_Pause | ADVERTISED_Asym_Pause;
+		}
 	} else if (epause->tx_pause) {
 		priv->tx_pause_en = 1;
-		/* FLOW_CTLR_TX */
-		newadv = ADVERTISED_Asym_Pause;
-	} else
-		newadv = 0;
+	}
 
 	if (epause->autoneg)
 		priv->pause_aneg_en = 1;
 	else
 		priv->pause_aneg_en = 0;
 
-	oldadv = phydev->advertising &
-		(ADVERTISED_Pause | ADVERTISED_Asym_Pause);
-	if (oldadv != newadv) {
-		phydev->advertising &=
-			~(ADVERTISED_Pause | ADVERTISED_Asym_Pause);
-		phydev->advertising |= newadv;
-		if (phydev->autoneg)
-			/* inform link partner of our
-			 * new flow ctrl settings
-			 */
-			return phy_start_aneg(phydev);
-
-		if (!epause->autoneg) {
-			u32 tempval;
-			tempval = gfar_read(&regs->maccfg1);
-			tempval &= ~(MACCFG1_TX_FLOW | MACCFG1_RX_FLOW);
-
-			priv->tx_actual_en = 0;
-			if (priv->tx_pause_en) {
-				priv->tx_actual_en = 1;
-				tempval |= MACCFG1_TX_FLOW;
-			}
+	if (!epause->autoneg) {
+		u32 tempval = gfar_read(&regs->maccfg1);
 
-			if (priv->rx_pause_en)
-				tempval |= MACCFG1_RX_FLOW;
-			gfar_write(&regs->maccfg1, tempval);
+		tempval &= ~(MACCFG1_TX_FLOW | MACCFG1_RX_FLOW);
+
+		priv->tx_actual_en = 0;
+		if (priv->tx_pause_en) {
+			priv->tx_actual_en = 1;
+			tempval |= MACCFG1_TX_FLOW;
 		}
+
+		if (priv->rx_pause_en)
+			tempval |= MACCFG1_RX_FLOW;
+		gfar_write(&regs->maccfg1, tempval);
 	}
 
 	return 0;
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index 22a817da861e..9600837f21b8 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -1742,12 +1742,7 @@ static int init_phy(struct net_device *dev)
 	if (priv->phy_interface == PHY_INTERFACE_MODE_SGMII)
 		uec_configure_serdes(dev);
 
-	phydev->supported &= (SUPPORTED_MII |
-			      SUPPORTED_Autoneg |
-			      ADVERTISED_10baseT_Half |
-			      ADVERTISED_10baseT_Full |
-			      ADVERTISED_100baseT_Half |
-			      ADVERTISED_100baseT_Full);
+	phy_set_max_speed(phydev, SPEED_100);
 
 	if (priv->max_speed == SPEED_1000)
 		phydev->supported |= ADVERTISED_1000baseT_Full;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index c56db06b63e0..cf18608669f5 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -5228,13 +5228,7 @@ static void hclge_set_flowctrl_adv(struct hclge_dev *hdev, u32 rx_en, u32 tx_en)
 	if (!phydev)
 		return;
 
-	phydev->advertising &= ~(ADVERTISED_Pause | ADVERTISED_Asym_Pause);
-
-	if (rx_en)
-		phydev->advertising |= ADVERTISED_Pause | ADVERTISED_Asym_Pause;
-
-	if (tx_en)
-		phydev->advertising ^= ADVERTISED_Asym_Pause;
+	phy_set_asym_pause(phydev, rx_en, tx_en);
 }
 
 static int hclge_cfg_pauseparam(struct hclge_dev *hdev, u32 rx_en, u32 tx_en)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
index 398971a062f4..24b1f2a0c32a 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
@@ -10,8 +10,6 @@
 
 #define HCLGE_PHY_SUPPORTED_FEATURES	(SUPPORTED_Autoneg | \
 					 SUPPORTED_TP | \
-					 SUPPORTED_Pause | \
-					 SUPPORTED_Asym_Pause | \
 					 PHY_10BT_FEATURES | \
 					 PHY_100BT_FEATURES | \
 					 PHY_1000BT_FEATURES)
@@ -213,7 +211,7 @@ int hclge_mac_connect_phy(struct hclge_dev *hdev)
 	}
 
 	phydev->supported &= HCLGE_PHY_SUPPORTED_FEATURES;
-	phydev->advertising = phydev->supported;
+	phy_support_asym_pause(phydev);
 
 	return 0;
 }
diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
index 7a637b51c7d2..7b25ba957d3f 100644
--- a/drivers/net/ethernet/lantiq_etop.c
+++ b/drivers/net/ethernet/lantiq_etop.c
@@ -364,15 +364,8 @@ ltq_etop_mdio_probe(struct net_device *dev)
 		return PTR_ERR(phydev);
 	}
 
-	phydev->supported &= (SUPPORTED_10baseT_Half
-			      | SUPPORTED_10baseT_Full
-			      | SUPPORTED_100baseT_Half
-			      | SUPPORTED_100baseT_Full
-			      | SUPPORTED_Autoneg
-			      | SUPPORTED_MII
-			      | SUPPORTED_TP);
-
-	phydev->advertising = phydev->supported;
+	phy_set_max_speed(phydev, SPEED_100);
+
 	phy_attached_info(phydev);
 
 	return 0;
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index b44bcfd85b05..cc1e9a96a43b 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -355,12 +355,8 @@ static int mtk_phy_connect(struct net_device *dev)
 	dev->phydev->speed = 0;
 	dev->phydev->duplex = 0;
 
-	if (of_phy_is_fixed_link(mac->of_node))
-		dev->phydev->supported |=
-		SUPPORTED_Pause | SUPPORTED_Asym_Pause;
-
-	dev->phydev->supported &= PHY_GBIT_FEATURES | SUPPORTED_Pause |
-				   SUPPORTED_Asym_Pause;
+	phy_set_max_speed(dev->phydev, SPEED_1000);
+	phy_support_asym_pause(dev->phydev);
 	dev->phydev->advertising = dev->phydev->supported |
 				    ADVERTISED_Autoneg;
 	phy_start_aneg(dev->phydev);
diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c
index e7dce79ff2c9..b1a0e657febf 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.c
+++ b/drivers/net/ethernet/microchip/lan743x_main.c
@@ -999,7 +999,6 @@ static int lan743x_phy_open(struct lan743x_adapter *adapter)
 	struct phy_device *phydev;
 	struct net_device *netdev;
 	int ret = -EIO;
-	u32 mii_adv;
 
 	netdev = adapter->netdev;
 	phydev = phy_find_first(adapter->mdiobus);
@@ -1013,13 +1012,11 @@ static int lan743x_phy_open(struct lan743x_adapter *adapter)
 		goto return_error;
 
 	/* MAC doesn't support 1000T Half */
-	phydev->supported &= ~SUPPORTED_1000baseT_Half;
+	phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
 
 	/* support both flow controls */
+	phy_support_asym_pause(phydev);
 	phy->fc_request_control = (FLOW_CTRL_RX | FLOW_CTRL_TX);
-	phydev->advertising &= ~(ADVERTISED_Pause | ADVERTISED_Asym_Pause);
-	mii_adv = (u32)mii_advertise_flowctrl(phy->fc_request_control);
-	phydev->advertising |= mii_adv_to_ethtool_adv_t(mii_adv);
 	phy->fc_autoneg = phydev->autoneg;
 
 	phy_start(phydev);
diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c
index 08381ef8bdb4..8b23d2848457 100644
--- a/drivers/net/ethernet/nxp/lpc_eth.c
+++ b/drivers/net/ethernet/nxp/lpc_eth.c
@@ -797,8 +797,7 @@ static int lpc_mii_probe(struct net_device *ndev)
 		return PTR_ERR(phydev);
 	}
 
-	/* mask with MAC supported features */
-	phydev->supported &= PHY_BASIC_FEATURES;
+	phy_set_max_speed(phydev, SPEED_100);
 
 	phydev->advertising = phydev->supported;
 
diff --git a/drivers/net/ethernet/rdc/r6040.c b/drivers/net/ethernet/rdc/r6040.c
index aa11b70b9ca4..04aa592f35c3 100644
--- a/drivers/net/ethernet/rdc/r6040.c
+++ b/drivers/net/ethernet/rdc/r6040.c
@@ -1024,16 +1024,8 @@ static int r6040_mii_probe(struct net_device *dev)
 		return PTR_ERR(phydev);
 	}
 
-	/* mask with MAC supported features */
-	phydev->supported &= (SUPPORTED_10baseT_Half
-				| SUPPORTED_10baseT_Full
-				| SUPPORTED_100baseT_Half
-				| SUPPORTED_100baseT_Full
-				| SUPPORTED_Autoneg
-				| SUPPORTED_MII
-				| SUPPORTED_TP);
-
-	phydev->advertising = phydev->supported;
+	phy_set_max_speed(phydev, SPEED_100);
+
 	lp->old_link = 0;
 	lp->old_duplex = -1;
 
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index aff5516b781e..fb2a1125780d 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -1074,7 +1074,8 @@ static int ravb_phy_init(struct net_device *ndev)
 	}
 
 	/* 10BASE is not supported */
-	phydev->supported &= ~PHY_10BT_FEATURES;
+	phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_10baseT_Half_BIT);
+	phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_10baseT_Full_BIT);
 
 	phy_attached_info(phydev);
 
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
index a9da1ad4b4f2..690aee88f0eb 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
@@ -298,8 +298,8 @@ static int sxgbe_init_phy(struct net_device *ndev)
 	/* Stop Advertising 1000BASE Capability if interface is not GMII */
 	if ((phy_iface == PHY_INTERFACE_MODE_MII) ||
 	    (phy_iface == PHY_INTERFACE_MODE_RMII))
-		phydev->advertising &= ~(SUPPORTED_1000baseT_Half |
-					 SUPPORTED_1000baseT_Full);
+		phy_set_max_speed(phydev, SPEED_1000);
+
 	if (phydev->phy_id == 0) {
 		phy_disconnect(phydev);
 		return -ENODEV;
diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index f0afb88d7bc2..c009407618d9 100644
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -1048,10 +1048,10 @@ static int smsc911x_mii_probe(struct net_device *dev)
 
 	phy_attached_info(phydev);
 
+	phy_set_max_speed(phydev, SPEED_100);
+
 	/* mask with MAC supported features */
-	phydev->supported &= (PHY_BASIC_FEATURES | SUPPORTED_Pause |
-			      SUPPORTED_Asym_Pause);
-	phydev->advertising = phydev->supported;
+	phy_support_asym_pause(phydev);
 
 	pdata->last_duplex = -1;
 	pdata->last_carrier = -1;
diff --git a/drivers/net/ethernet/smsc/smsc9420.c b/drivers/net/ethernet/smsc/smsc9420.c
index 2fa3c1d03abc..9b6366b20110 100644
--- a/drivers/net/ethernet/smsc/smsc9420.c
+++ b/drivers/net/ethernet/smsc/smsc9420.c
@@ -1135,10 +1135,10 @@ static int smsc9420_mii_probe(struct net_device *dev)
 		return PTR_ERR(phydev);
 	}
 
+	phy_set_max_speed(phydev, SPEED_100);
+
 	/* mask with MAC supported features */
-	phydev->supported &= (PHY_BASIC_FEATURES | SUPPORTED_Pause |
-			      SUPPORTED_Asym_Pause);
-	phydev->advertising = phydev->supported;
+	phy_support_asym_pause(phydev);
 
 	phy_attached_info(phydev);
 
diff --git a/drivers/net/ethernet/socionext/sni_ave.c b/drivers/net/ethernet/socionext/sni_ave.c
index f7ecceeb1e28..61e6abb966ac 100644
--- a/drivers/net/ethernet/socionext/sni_ave.c
+++ b/drivers/net/ethernet/socionext/sni_ave.c
@@ -461,16 +461,7 @@ static int ave_ethtool_set_pauseparam(struct net_device *ndev,
 	priv->pause_rx   = pause->rx_pause;
 	priv->pause_tx   = pause->tx_pause;
 
-	phydev->advertising &= ~(ADVERTISED_Pause | ADVERTISED_Asym_Pause);
-	if (pause->rx_pause)
-		phydev->advertising |= ADVERTISED_Pause | ADVERTISED_Asym_Pause;
-	if (pause->tx_pause)
-		phydev->advertising ^= ADVERTISED_Asym_Pause;
-
-	if (pause->autoneg) {
-		if (netif_running(ndev))
-			phy_start_aneg(phydev);
-	}
+	phy_set_asym_pause(phydev, pause->rx_pause, pause->tx_pause);
 
 	return 0;
 }
@@ -1223,11 +1214,10 @@ static int ave_init(struct net_device *ndev)
 	phy_ethtool_get_wol(phydev, &wol);
 	device_set_wakeup_capable(&ndev->dev, !!wol.supported);
 
-	if (!phy_interface_is_rgmii(phydev)) {
-		phydev->supported &= ~PHY_GBIT_FEATURES;
-		phydev->supported |= PHY_BASIC_FEATURES;
-	}
-	phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
+	if (!phy_interface_is_rgmii(phydev))
+		phy_set_max_speed(phydev, SPEED_100);
+
+	phy_support_asym_pause(phydev);
 
 	phy_attached_info(phydev);
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 9f458bb16f2a..3715a0a4af3c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -987,17 +987,20 @@ static int stmmac_init_phy(struct net_device *dev)
 	if ((interface == PHY_INTERFACE_MODE_MII) ||
 	    (interface == PHY_INTERFACE_MODE_RMII) ||
 		(max_speed < 1000 && max_speed > 0))
-		phydev->advertising &= ~(SUPPORTED_1000baseT_Half |
-					 SUPPORTED_1000baseT_Full);
+		phy_set_max_speed(phydev, SPEED_100);
 
 	/*
 	 * Half-duplex mode not supported with multiqueue
 	 * half-duplex can only works with single queue
 	 */
-	if (tx_cnt > 1)
-		phydev->supported &= ~(SUPPORTED_1000baseT_Half |
-				       SUPPORTED_100baseT_Half |
-				       SUPPORTED_10baseT_Half);
+	if (tx_cnt > 1) {
+		phy_remove_link_mode(phydev,
+				     ETHTOOL_LINK_MODE_10baseT_Half_BIT);
+		phy_remove_link_mode(phydev,
+				     ETHTOOL_LINK_MODE_100baseT_Half_BIT);
+		phy_remove_link_mode(phydev,
+				     ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
+	}
 
 	/*
 	 * Broken HW is sometimes missing the pull-up resistor on the
diff --git a/drivers/net/ethernet/toshiba/tc35815.c b/drivers/net/ethernet/toshiba/tc35815.c
index cce9c9ed46aa..7163a8d10dba 100644
--- a/drivers/net/ethernet/toshiba/tc35815.c
+++ b/drivers/net/ethernet/toshiba/tc35815.c
@@ -628,7 +628,7 @@ static int tc_mii_probe(struct net_device *dev)
 	phy_attached_info(phydev);
 
 	/* mask with MAC supported features */
-	phydev->supported &= PHY_BASIC_FEATURES;
+	phy_set_max_speed(phydev, SPEED_100);
 	dropmask = 0;
 	if (options.speed == 10)
 		dropmask |= SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full;
diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index 42f1f518dad6..46d3092b8aad 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -941,8 +941,7 @@ static int xemaclite_open(struct net_device *dev)
 		}
 
 		/* EmacLite doesn't support giga-bit speeds */
-		lp->phy_dev->supported &= (PHY_BASIC_FEATURES);
-		lp->phy_dev->advertising = lp->phy_dev->supported;
+		phy_set_max_speed(lp->phy_dev, SPEED_100);
 
 		/* Don't advertise 1000BASE-T Full/Half duplex speeds */
 		phy_write(lp->phy_dev, MII_CTRL1000, 0);
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 82070792edbb..3d187cd50eb0 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -240,7 +240,7 @@ config AT803X_PHY
 
 config BCM63XX_PHY
 	tristate "Broadcom 63xx SOCs internal PHY"
-	depends on BCM63XX
+	depends on BCM63XX || COMPILE_TEST
 	select BCM_NET_PHYLIB
 	---help---
 	  Currently supports the 6348 and 6358 PHYs.
diff --git a/drivers/net/phy/et1011c.c b/drivers/net/phy/et1011c.c
index a9a4edfa23c8..ab541c9c56fb 100644
--- a/drivers/net/phy/et1011c.c
+++ b/drivers/net/phy/et1011c.c
@@ -91,7 +91,7 @@ static struct phy_driver et1011c_driver[] = { {
 	.phy_id		= 0x0282f014,
 	.name		= "ET1011C",
 	.phy_id_mask	= 0xfffffff0,
-	.features	= (PHY_BASIC_FEATURES | SUPPORTED_1000baseT_Full),
+	.features	= PHY_GBIT_FEATURES,
 	.flags		= PHY_POLL,
 	.config_aneg	= et1011c_config_aneg,
 	.read_status	= et1011c_read_status,
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index db1172db1e7c..af64a9320fb0 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1765,6 +1765,124 @@ int phy_set_max_speed(struct phy_device *phydev, u32 max_speed)
 }
 EXPORT_SYMBOL(phy_set_max_speed);
 
+/**
+ * phy_remove_link_mode - Remove a supported link mode
+ * @phydev: phy_device structure to remove link mode from
+ * @link_mode: Link mode to be removed
+ *
+ * Description: Some MACs don't support all link modes which the PHY
+ * does.  e.g. a 1G MAC often does not support 1000Half. Add a helper
+ * to remove a link mode.
+ */
+void phy_remove_link_mode(struct phy_device *phydev, u32 link_mode)
+{
+	WARN_ON(link_mode > 31);
+
+	phydev->supported &= ~BIT(link_mode);
+	phydev->advertising = phydev->supported;
+}
+EXPORT_SYMBOL(phy_remove_link_mode);
+
+/**
+ * phy_support_sym_pause - Enable support of symmetrical pause
+ * @phydev: target phy_device struct
+ *
+ * Description: Called by the MAC to indicate is supports symmetrical
+ * Pause, but not asym pause.
+ */
+void phy_support_sym_pause(struct phy_device *phydev)
+{
+	phydev->supported |= SUPPORTED_Pause;
+	phydev->advertising = phydev->supported;
+}
+EXPORT_SYMBOL(phy_support_sym_pause);
+
+/**
+ * phy_support_asym_pause - Enable support of asym pause
+ * @phydev: target phy_device struct
+ *
+ * Description: Called by the MAC to indicate is supports Asym Pause.
+ */
+void phy_support_asym_pause(struct phy_device *phydev)
+{
+	phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
+	phydev->advertising = phydev->supported;
+}
+EXPORT_SYMBOL(phy_support_asym_pause);
+
+/**
+ * phy_set_sym_pause - Configure symmetric Pause
+ * @phydev: target phy_device struct
+ * @rx: Receiver Pause is supported
+ * @tx: Transmit Pause is supported
+ * @autoneg: Auto neg should be used
+ *
+ * Description: Configure advertised Pause support depending on if
+ * receiver pause and pause auto neg is supported. Generally called
+ * from the set_pauseparam .ndo.
+ */
+void phy_set_sym_pause(struct phy_device *phydev, bool rx, bool tx,
+		       bool autoneg)
+{
+	phydev->supported &= ~SUPPORTED_Pause;
+
+	if (rx && tx && autoneg)
+		phydev->supported |= SUPPORTED_Pause;
+
+	phydev->advertising = phydev->supported;
+}
+EXPORT_SYMBOL(phy_set_sym_pause);
+
+/**
+ * phy_set_asym_pause - Configure Pause and Asym Pause
+ * @phydev: target phy_device struct
+ * @rx: Receiver Pause is supported
+ * @tx: Transmit Pause is supported
+ *
+ * Description: Configure advertised Pause support depending on if
+ * transmit and receiver pause is supported. If there has been a
+ * change in adverting, trigger a new autoneg. Generally called from
+ * the set_pauseparam .ndo.
+ */
+void phy_set_asym_pause(struct phy_device *phydev, bool rx, bool tx)
+{
+	u16 oldadv = phydev->advertising;
+	u16 newadv = oldadv &= ~(SUPPORTED_Pause | SUPPORTED_Asym_Pause);
+
+	if (rx)
+		newadv |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
+	if (tx)
+		newadv ^= SUPPORTED_Asym_Pause;
+
+	if (oldadv != newadv) {
+		phydev->advertising = newadv;
+
+		if (phydev->autoneg)
+			phy_start_aneg(phydev);
+	}
+}
+EXPORT_SYMBOL(phy_set_asym_pause);
+
+/**
+ * phy_validate_pause - Test if the PHY/MAC support the pause configuration
+ * @phydev: phy_device struct
+ * @pp: requested pause configuration
+ *
+ * Description: Test if the PHY/MAC combination supports the Pause
+ * configuration the user is requesting. Returns True if it is
+ * supported, false otherwise.
+ */
+bool phy_validate_pause(struct phy_device *phydev,
+			struct ethtool_pauseparam *pp)
+{
+	if (!(phydev->supported & SUPPORTED_Pause) ||
+	    (!(phydev->supported & SUPPORTED_Asym_Pause) &&
+	     pp->rx_pause != pp->tx_pause))
+		return false;
+	return true;
+}
+EXPORT_SYMBOL(phy_validate_pause);
+
 static void of_set_phy_supported(struct phy_device *phydev)
 {
 	struct device_node *node = phydev->mdio.dev.of_node;
diff --git a/drivers/net/phy/ste10Xp.c b/drivers/net/phy/ste10Xp.c
index fbd548a1ad84..2fe9a87b55b5 100644
--- a/drivers/net/phy/ste10Xp.c
+++ b/drivers/net/phy/ste10Xp.c
@@ -86,7 +86,7 @@ static struct phy_driver ste10xp_pdriver[] = {
 	.phy_id = STE101P_PHY_ID,
 	.phy_id_mask = 0xfffffff0,
 	.name = "STe101p",
-	.features = PHY_BASIC_FEATURES | SUPPORTED_Pause,
+	.features = PHY_BASIC_FEATURES,
 	.flags = PHY_HAS_INTERRUPT,
 	.config_init = ste10Xp_config_init,
 	.ack_interrupt = ste10Xp_ack_interrupt,
@@ -97,7 +97,7 @@ static struct phy_driver ste10xp_pdriver[] = {
 	.phy_id = STE100P_PHY_ID,
 	.phy_id_mask = 0xffffffff,
 	.name = "STe100p",
-	.features = PHY_BASIC_FEATURES | SUPPORTED_Pause,
+	.features = PHY_BASIC_FEATURES,
 	.flags = PHY_HAS_INTERRUPT,
 	.config_init = ste10Xp_config_init,
 	.ack_interrupt = ste10Xp_ack_interrupt,
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 3ce3c66559e4..95a98a20b2e3 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -2166,7 +2166,7 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
 	}
 
 	/* MAC doesn't support 1000T Half */
-	phydev->supported &= ~SUPPORTED_1000baseT_Half;
+	phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
 
 	/* support both flow controls */
 	dev->fc_request_control = (FLOW_CTRL_RX | FLOW_CTRL_TX);
diff --git a/drivers/staging/mt7621-eth/mdio.c b/drivers/staging/mt7621-eth/mdio.c
index 7ad0c4141205..2c6e1800a3fd 100644
--- a/drivers/staging/mt7621-eth/mdio.c
+++ b/drivers/staging/mt7621-eth/mdio.c
@@ -112,7 +112,7 @@ static void phy_init(struct mtk_eth *eth, struct mtk_mac *mac,
 	phy->autoneg = AUTONEG_ENABLE;
 	phy->speed = 0;
 	phy->duplex = 0;
-	phy->supported &= PHY_BASIC_FEATURES;
+	phy_set_max_speed(phy, SPEED_100);
 	phy->advertising = phy->supported | ADVERTISED_Autoneg;
 
 	phy_start_aneg(phy);
diff --git a/include/linux/phy.h b/include/linux/phy.h
index cd6f637cbbfb..192a1fa0c73b 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1049,6 +1049,14 @@ int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd);
 int phy_start_interrupts(struct phy_device *phydev);
 void phy_print_status(struct phy_device *phydev);
 int phy_set_max_speed(struct phy_device *phydev, u32 max_speed);
+void phy_remove_link_mode(struct phy_device *phydev, u32 link_mode);
+void phy_support_sym_pause(struct phy_device *phydev);
+void phy_support_asym_pause(struct phy_device *phydev);
+void phy_set_sym_pause(struct phy_device *phydev, bool rx, bool tx,
+		       bool autoneg);
+void phy_set_asym_pause(struct phy_device *phydev, bool rx, bool tx);
+bool phy_validate_pause(struct phy_device *phydev,
+			struct ethtool_pauseparam *pp);
 
 int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
 		       int (*run)(struct phy_device *));