diff options
| author | Eric Chanudet <echanude@redhat.com> | 2024-01-23 14:28:57 -0500 |
|---|---|---|
| committer | Martin K. Petersen <martin.petersen@oracle.com> | 2024-01-24 21:35:56 -0500 |
| commit | 10a39667a117daf0c1baaebcbe589715ee79178b (patch) | |
| tree | 7aacc304af94a0940dc10d8fa3fc8d91a63117cb | |
| parent | 883a8b451cf4c659d5bba0becfc3780394b597c8 (diff) | |
scsi: ufs: qcom: Avoid re-init quirk when gears match
On sa8775p-ride, probing the HBA will go through the
UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH path although the power info is
the same during the second init.
The REINIT quirk only applies starting with controller v4. For these,
ufs_qcom_get_hs_gear() reads the highest supported gear when setting the
host_params. After the negotiation, if the host and device are on the same
gear, it is the highest gear supported between the two. Skip REINIT to save
some time.
Signed-off-by: Eric Chanudet <echanude@redhat.com>
Link: https://lore.kernel.org/r/20240123192854.1724905-4-echanude@redhat.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| -rw-r--r-- | drivers/ufs/host/ufs-qcom.c | 13 |
1 files changed, 11 insertions, 2 deletions
diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index d9ec2dfbbda4..0aeaee1c564c 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -738,8 +738,17 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, * the second init can program the optimal PHY settings. This allows one to start * the first init with either the minimum or the maximum support gear. */ - if (hba->ufshcd_state == UFSHCD_STATE_RESET) - host->phy_gear = dev_req_params->gear_tx; + if (hba->ufshcd_state == UFSHCD_STATE_RESET) { + /* + * Skip REINIT if the negotiated gear matches with the + * initial phy_gear. Otherwise, update the phy_gear to + * program the optimal gear setting during REINIT. + */ + if (host->phy_gear == dev_req_params->gear_tx) + hba->quirks &= ~UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH; + else + host->phy_gear = dev_req_params->gear_tx; + } /* enable the device ref clock before changing to HS mode */ if (!ufshcd_is_hs_mode(&hba->pwr_info) && |