1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
|
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2019 Stefan Roese <sr@denx.de>
*/
/dts-v1/;
/include/ "mt7628a.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "gardena,smart-gateway-mt7688", "ralink,mt7688a-soc",
"ralink,mt7628a-soc";
model = "GARDENA smart Gateway (MT7688)";
memory@0 {
device_type = "memory";
reg = <0x0 0x8000000>;
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinmux_gpio_gpio>; /* GPIO11 */
user_btn1 {
label = "USER_BTN1";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
linux,code =<KEY_PROG1> ;
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinmux_pwm0_gpio>, /* GPIO18 */
<&pinmux_pwm1_gpio>, /* GPIO19 */
<&pinmux_sdmode_gpio>, /* GPIO22..29 */
<&pinmux_p0led_an_gpio>; /* GPIO43 */
/*
* <&pinmux_i2s_gpio> (covers GPIO0..3) is needed here as
* well for GPIO3. But this is already claimed for uart1
* (see below). So we can't include it in this LED node.
*/
power_blue {
label = "smartgw:power:blue";
gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
power_green {
label = "smartgw:power:green";
gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
power_red {
label = "smartgw:power:red";
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
radio_blue {
label = "smartgw:radio:blue";
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
radio_green {
label = "smartgw:radio:green";
gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
radio_red {
label = "smartgw:radio:red";
gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
internet_blue {
label = "smartgw:internet:blue";
gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
internet_green {
label = "smartgw:internet:green";
gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
internet_red {
label = "smartgw:internet:red";
gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
ethernet_link {
label = "smartgw:eth:link";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "netdev";
};
ethernet_activity {
label = "smartgw:eth:act";
gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
linux,default-trigger = "netdev";
};
};
aliases {
serial0 = &uart0;
};
};
&i2c {
status = "okay";
};
&spi {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinmux_spi_spi>, <&pinmux_spi_cs1_cs>;
m25p80@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x0 0xa0000>;
read-only;
};
partition@a0000 {
label = "uboot_env0";
reg = <0xa0000 0x10000>;
};
partition@b0000 {
label = "uboot_env1";
reg = <0xb0000 0x10000>;
};
factory: partition@c0000 {
label = "factory";
reg = <0xc0000 0x10000>;
read-only;
};
};
};
nand_flash@1 {
compatible = "spi-nand";
linux,mtd-name = "gd5f";
reg = <1>;
spi-max-frequency = <40000000>;
};
};
&uart1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinmux_i2s_gpio>; /* GPIO0..3 */
rts-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
cts-gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
&uart2 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinmux_p2led_an_gpio>, /* GPIO41 */
<&pinmux_p3led_an_gpio>; /* GPIO40 */
rts-gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
cts-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
};
&watchdog {
status = "okay";
};
|