summaryrefslogtreecommitdiff
path: root/mm/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2020-10-18mm: add a vmap_pfn functionChristoph Hellwig1-0/+3
Add a proper helper to remap PFNs into kernel virtual space so that drivers don't have to abuse alloc_vm_area and open coded PTE manipulation for it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Juergen Gross <jgross@suse.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Link: https://lkml.kernel.org/r/20201002122204.1534411-4-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16mm/memory_hotplug: mark pageblocks MIGRATE_ISOLATE while onlining memoryDavid Hildenbrand1-1/+1
Currently, it can happen that pages are allocated (and freed) via the buddy before we finished basic memory onlining. For example, pages are exposed to the buddy and can be allocated before we actually mark the sections online. Allocated pages could suddenly fail pfn_to_online_page() checks. We had similar issues with pcp handling, when pages are allocated+freed before we reach zone_pcp_update() in online_pages() [1]. Instead, mark all pageblocks MIGRATE_ISOLATE, such that allocations are impossible. Once done with the heavy lifting, use undo_isolate_page_range() to move the pages to the MIGRATE_MOVABLE freelist, marking them ready for allocation. Similar to offline_pages(), we have to manually adjust zone->nr_isolate_pageblock. [1] https://lkml.kernel.org/r/1597150703-19003-1-git-send-email-charante@codeaurora.org Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Cc: Baoquan He <bhe@redhat.com> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Charan Teja Reddy <charante@codeaurora.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michel Lespinasse <walken@google.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20200819175957.28465-11-david@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-15Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-1/+2
Pull dma-mapping updates from Christoph Hellwig: - rework the non-coherent DMA allocator - move private definitions out of <linux/dma-mapping.h> - lower CMA_ALIGNMENT (Paul Cercueil) - remove the omap1 dma address translation in favor of the common code - make dma-direct aware of multiple dma offset ranges (Jim Quinlan) - support per-node DMA CMA areas (Barry Song) - increase the default seg boundary limit (Nicolin Chen) - misc fixes (Robin Murphy, Thomas Tai, Xu Wang) - various cleanups * tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits) ARM/ixp4xx: add a missing include of dma-map-ops.h dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling dma-direct: factor out a dma_direct_alloc_from_pool helper dma-direct check for highmem pages in dma_direct_alloc_pages dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h> dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma dma-mapping: move dma-debug.h to kernel/dma/ dma-mapping: remove <asm/dma-contiguous.h> dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h> dma-contiguous: remove dma_contiguous_set_default dma-contiguous: remove dev_set_cma_area dma-contiguous: remove dma_declare_contiguous dma-mapping: split <linux/dma-mapping.h> cma: decrease CMA_ALIGNMENT lower limit to 2 firewire-ohci: use dma_alloc_pages dma-iommu: implement ->alloc_noncoherent dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods dma-mapping: add a new dma_alloc_pages API dma-mapping: remove dma_cache_sync 53c700: convert to dma_alloc_noncoherent ...
2020-10-13mm/gup_benchmark: update the documentation in KconfigBarry Song1-2/+2
In the beginning, mm/gup_benchmark.c supported get_user_pages_fast() only, but right now, it supports the benchmarking of a couple of get_user_pages() related calls like: * get_user_pages_fast() * get_user_pages() * pin_user_pages_fast() * pin_user_pages() The documentation is confusing and needs update. Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Link: https://lkml.kernel.org/r/20200821032546.19992-1-song.bao.hua@hisilicon.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-24Fix references to nommu-mmap.rstStephen Kitt1-1/+1
nommu-mmap.rst was moved to Documentation/admin-guide/mm; this patch updates the remaining stale references to Documentation/mm. Fixes: 800c02f5d030 ("docs: move nommu-mmap.txt to admin-guide and rename to ReST") Signed-off-by: Stephen Kitt <steve@sk2.org> Link: https://lore.kernel.org/r/20200812092230.27541-1-steve@sk2.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-09-01dma-contiguous: provide the ability to reserve per-numa CMABarry Song1-1/+2
Right now, drivers like ARM SMMU are using dma_alloc_coherent() to get coherent DMA buffers to save their command queues and page tables. As there is only one default CMA in the whole system, SMMUs on nodes other than node0 will get remote memory. This leads to significant latency. This patch provides per-numa CMA so that drivers like SMMU can get local memory. Tests show localizing CMA can decrease dma_unmap latency much. For instance, before this patch, SMMU on node2 has to wait for more than 560ns for the completion of CMD_SYNC in an empty command queue; with this patch, it needs 240ns only. A positive side effect of this patch would be improving performance even further for those users who are worried about performance more than DMA security and use iommu.passthrough=1 to skip IOMMU. With local CMA, all drivers can get local coherent DMA buffers. Also, this patch changes the default CONFIG_CMA_AREAS to 19 in NUMA. As 1+CONFIG_CMA_AREAS should be quite enough for most servers on the market even they enable both hugetlb_cma and pernuma_cma. 2 numa nodes: 2(hugetlb) + 2(pernuma) + 1(default global cma) = 5 4 numa nodes: 4(hugetlb) + 4(pernuma) + 1(default global cma) = 9 8 numa nodes: 8(hugetlb) + 8(pernuma) + 1(default global cma) = 17 Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-08-07mm/sparse: cleanup the code surrounding memory_present()Mike Rapoport1-5/+1
After removal of CONFIG_HAVE_MEMBLOCK_NODE_MAP we have two equivalent functions that call memory_present() for each region in memblock.memory: sparse_memory_present_with_active_regions() and membocks_present(). Moreover, all architectures have a call to either of these functions preceding the call to sparse_init() and in the most cases they are called one after the other. Mark the regions from memblock.memory as present during sparce_init() by making sparse_init() call memblocks_present(), make memblocks_present() and memory_present() functions static and remove redundant sparse_memory_present_with_active_regions() function. Also remove no longer required HAVE_MEMORY_PRESENT configuration option. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20200712083130.22919-1-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-26docs: move nommu-mmap.txt to admin-guide and rename to ReSTMauro Carvalho Chehab1-1/+1
The nommu-mmap.txt file provides description of user visible behaviuour. So, move it to the admin-guide. As it is already at the ReST, also rename it. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Suggested-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/3a63d1833b513700755c85bf3bda0a6c4ab56986.1592918949.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-06-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-nextLinus Torvalds1-0/+4
Pull sparc updates from David Miller: - Rework the sparc32 page tables so that READ_ONCE(*pmd), as done by generic code, operates on a word sized element. From Will Deacon. - Some scnprintf() conversions, from Chen Zhou. - A pin_user_pages() conversion from John Hubbard. - Several 32-bit ptrace register handling fixes and such from Al Viro. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next: fix a braino in "sparc32: fix register window handling in genregs32_[gs]et()" sparc32: mm: Only call ctor()/dtor() functions for first and last user sparc32: mm: Disable SPLIT_PTLOCK_CPUS sparc32: mm: Don't try to free page-table pages if ctor() fails sparc32: register memory occupied by kernel as memblock.memory sparc: remove unused header file nfs_fs.h sparc32: fix register window handling in genregs32_[gs]et() sparc64: fix misuses of access_process_vm() in genregs32_[sg]et() oradax: convert get_user_pages() --> pin_user_pages() sparc: use scnprintf() in show_pciobppath_attr() in vio.c sparc: use scnprintf() in show_pciobppath_attr() in pci.c tty: vcc: Fix error return code in vcc_probe() sparc32: mm: Reduce allocation size for PMD and PTE tables sparc32: mm: Change pgtable_t type to pte_t * instead of struct page * sparc32: mm: Restructure sparc32 MMU page-table layout sparc32: mm: Fix argument checking in __srmmu_get_nocache() sparc64: Replace zero-length array with flexible-array sparc: mm: return true,false in kern_addr_valid()
2020-06-04mm/memory_hotplug: disable the functionality for 32bMichal Hocko1-0/+1
Memory hotlug is broken for 32b systems at least since c6f03e2903c9 ("mm, memory_hotplug: remove zone restrictions") which has considerably reworked how can be memory associated with movable/kernel zones. The same is not really trivial to achieve in 32b where only lowmem is the kernel zone. While we can tweak this immediate problem around there are likely other land mines hidden at other places. It is also quite dubious that there is a real usecase for the memory hotplug on 32b in the first place. Low memory is just too small to be hotplugable (for hot add) and generally unusable for hotremove. Adding more memory to highmem is also dubious because it would increase the low mem or vmalloc space pressure for memmaps. Restrict the functionality to 64b systems. This will help future development to focus on usecases that have real life application. We can remove this restriction in future in presence of a real life usecase of course but until then make it explicit that hotplug on 32b is broken and requires a non trivial amount of work to fix. Robin said: "32-bit Arm doesn't support memory hotplug, and as far as I'm aware there's little likelihood of it ever wanting to. FWIW it looks like SuperH is the only pure-32-bit architecture to have hotplug support at all" Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Wei Yang <richardw.yang@linux.intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com> Link: http://lkml.kernel.org/r/20200218100532.GA4151@dhcp22.suse.cz Link: https://bugzilla.kernel.org/show_bug.cgi?id=206401 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04mm/memory_hotplug: handle memblocks only with CONFIG_ARCH_KEEP_MEMBLOCKDavid Hildenbrand1-0/+3
The comment in add_memory_resource() is stale: hotadd_new_pgdat() will no longer call get_pfn_range_for_nid(), as a hotadded pgdat will simply span no pages at all, until memory is moved to the zone/node via move_pfn_range_to_zone() - e.g., when onlining memory blocks. The only archs that care about memblocks for hotplugged memory (either for iterating over all system RAM or testing for memory validity) are arm64, s390x, and powerpc - due to CONFIG_ARCH_KEEP_MEMBLOCK. Without CONFIG_ARCH_KEEP_MEMBLOCK, we can simply stop messing with memblocks. Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Link: http://lkml.kernel.org/r/20200422155353.25381-3-david@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03mm: parallelize deferred_init_memmap()Daniel Jordan1-3/+3
Deferred struct page init is a significant bottleneck in kernel boot. Optimizing it maximizes availability for large-memory systems and allows spinning up short-lived VMs as needed without having to leave them running. It also benefits bare metal machines hosting VMs that are sensitive to downtime. In projects such as VMM Fast Restart[1], where guest state is preserved across kexec reboot, it helps prevent application and network timeouts in the guests. Multithread to take full advantage of system memory bandwidth. The maximum number of threads is capped at the number of CPUs on the node because speedups always improve with additional threads on every system tested, and at this phase of boot, the system is otherwise idle and waiting on page init to finish. Helper threads operate on section-aligned ranges to both avoid false sharing when setting the pageblock's migrate type and to avoid accessing uninitialized buddy pages, though max order alignment is enough for the latter. The minimum chunk size is also a section. There was benefit to using multiple threads even on relatively small memory (1G) systems, and this is the smallest size that the alignment allows. The time (milliseconds) is the slowest node to initialize since boot blocks until all nodes finish. intel_pstate is loaded in active mode without hwp and with turbo enabled, and intel_idle is active as well. Intel(R) Xeon(R) Platinum 8167M CPU @ 2.00GHz (Skylake, bare metal) 2 nodes * 26 cores * 2 threads = 104 CPUs 384G/node = 768G memory kernel boot deferred init ------------------------ ------------------------ node% (thr) speedup time_ms (stdev) speedup time_ms (stdev) ( 0) -- 4089.7 ( 8.1) -- 1785.7 ( 7.6) 2% ( 1) 1.7% 4019.3 ( 1.5) 3.8% 1717.7 ( 11.8) 12% ( 6) 34.9% 2662.7 ( 2.9) 79.9% 359.3 ( 0.6) 25% ( 13) 39.9% 2459.0 ( 3.6) 91.2% 157.0 ( 0.0) 37% ( 19) 39.2% 2485.0 ( 29.7) 90.4% 172.0 ( 28.6) 50% ( 26) 39.3% 2482.7 ( 25.7) 90.3% 173.7 ( 30.0) 75% ( 39) 39.0% 2495.7 ( 5.5) 89.4% 190.0 ( 1.0) 100% ( 52) 40.2% 2443.7 ( 3.8) 92.3% 138.0 ( 1.0) Intel(R) Xeon(R) CPU E5-2699C v4 @ 2.20GHz (Broadwell, kvm guest) 1 node * 16 cores * 2 threads = 32 CPUs 192G/node = 192G memory kernel boot deferred init ------------------------ ------------------------ node% (thr) speedup time_ms (stdev) speedup time_ms (stdev) ( 0) -- 1988.7 ( 9.6) -- 1096.0 ( 11.5) 3% ( 1) 1.1% 1967.0 ( 17.6) 0.3% 1092.7 ( 11.0) 12% ( 4) 41.1% 1170.3 ( 14.2) 73.8% 287.0 ( 3.6) 25% ( 8) 47.1% 1052.7 ( 21.9) 83.9% 177.0 ( 13.5) 38% ( 12) 48.9% 1016.3 ( 12.1) 86.8% 144.7 ( 1.5) 50% ( 16) 48.9% 1015.7 ( 8.1) 87.8% 134.0 ( 4.4) 75% ( 24) 49.1% 1012.3 ( 3.1) 88.1% 130.3 ( 2.3) 100% ( 32) 49.5% 1004.0 ( 5.3) 88.5% 125.7 ( 2.1) Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz (Haswell, bare metal) 2 nodes * 18 cores * 2 threads = 72 CPUs 128G/node = 256G memory kernel boot deferred init ------------------------ ------------------------ node% (thr) speedup time_ms (stdev) speedup time_ms (stdev) ( 0) -- 1680.0 ( 4.6) -- 627.0 ( 4.0) 3% ( 1) 0.3% 1675.7 ( 4.5) -0.2% 628.0 ( 3.6) 11% ( 4) 25.6% 1250.7 ( 2.1) 67.9% 201.0 ( 0.0) 25% ( 9) 30.7% 1164.0 ( 17.3) 81.8% 114.3 ( 17.7) 36% ( 13) 31.4% 1152.7 ( 10.8) 84.0% 100.3 ( 17.9) 50% ( 18) 31.5% 1150.7 ( 9.3) 83.9% 101.0 ( 14.1) 75% ( 27) 31.7% 1148.0 ( 5.6) 84.5% 97.3 ( 6.4) 100% ( 36) 32.0% 1142.3 ( 4.0) 85.6% 90.0 ( 1.0) AMD EPYC 7551 32-Core Processor (Zen, kvm guest) 1 node * 8 cores * 2 threads = 16 CPUs 64G/node = 64G memory kernel boot deferred init ------------------------ ------------------------ node% (thr) speedup time_ms (stdev) speedup time_ms (stdev) ( 0) -- 1029.3 ( 25.1) -- 240.7 ( 1.5) 6% ( 1) -0.6% 1036.0 ( 7.8) -2.2% 246.0 ( 0.0) 12% ( 2) 11.8% 907.7 ( 8.6) 44.7% 133.0 ( 1.0) 25% ( 4) 13.9% 886.0 ( 10.6) 62.6% 90.0 ( 6.0) 38% ( 6) 17.8% 845.7 ( 14.2) 69.1% 74.3 ( 3.8) 50% ( 8) 16.8% 856.0 ( 22.1) 72.9% 65.3 ( 5.7) 75% ( 12) 15.4% 871.0 ( 29.2) 79.8% 48.7 ( 7.4) 100% ( 16) 21.0% 813.7 ( 21.0) 80.5% 47.0 ( 5.2) Server-oriented distros that enable deferred page init sometimes run in small VMs, and they still benefit even though the fraction of boot time saved is smaller: AMD EPYC 7551 32-Core Processor (Zen, kvm guest) 1 node * 2 cores * 2 threads = 4 CPUs 16G/node = 16G memory kernel boot deferred init ------------------------ ------------------------ node% (thr) speedup time_ms (stdev) speedup time_ms (stdev) ( 0) -- 716.0 ( 14.0) -- 49.7 ( 0.6) 25% ( 1) 1.8% 703.0 ( 5.3) -4.0% 51.7 ( 0.6) 50% ( 2) 1.6% 704.7 ( 1.2) 43.0% 28.3 ( 0.6) 75% ( 3) 2.7% 696.7 ( 13.1) 49.7% 25.0 ( 0.0) 100% ( 4) 4.1% 687.0 ( 10.4) 55.7% 22.0 ( 0.0) Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz (Haswell, kvm guest) 1 node * 2 cores * 2 threads = 4 CPUs 14G/node = 14G memory kernel boot deferred init ------------------------ ------------------------ node% (thr) speedup time_ms (stdev) speedup time_ms (stdev) ( 0) -- 787.7 ( 6.4) -- 122.3 ( 0.6) 25% ( 1) 0.2% 786.3 ( 10.8) -2.5% 125.3 ( 2.1) 50% ( 2) 5.9% 741.0 ( 13.9) 37.6% 76.3 ( 19.7) 75% ( 3) 8.3% 722.0 ( 19.0) 49.9% 61.3 ( 3.2) 100% ( 4) 9.3% 714.7 ( 9.5) 56.4% 53.3 ( 1.5) On Josh's 96-CPU and 192G memory system: Without this patch series: [ 0.487132] node 0 initialised, 23398907 pages in 292ms [ 0.499132] node 1 initialised, 24189223 pages in 304ms ... [ 0.629376] Run /sbin/init as init process With this patch series: [ 0.231435] node 1 initialised, 24189223 pages in 32ms [ 0.236718] node 0 initialised, 23398907 pages in 36ms [1] https://static.sched.com/hosted_files/kvmforum2019/66/VMM-fast-restart_kvmforum2019.pdf Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Josh Triplett <josh@joshtriplett.org> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Robert Elliott <elliott@hpe.com> Cc: Shile Zhang <shile.zhang@linux.alibaba.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Steven Sistare <steven.sistare@oracle.com> Cc: Tejun Heo <tj@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Link: http://lkml.kernel.org/r/20200527173608.2885243-7-daniel.m.jordan@oracle.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03mm: remove CONFIG_HAVE_MEMBLOCK_NODE_MAP optionMike Rapoport1-3/+0
CONFIG_HAVE_MEMBLOCK_NODE_MAP is used to differentiate initialization of nodes and zones structures between the systems that have region to node mapping in memblock and those that don't. Currently all the NUMA architectures enable this option and for the non-NUMA systems we can presume that all the memory belongs to node 0 and therefore the compile time configuration option is not required. The remaining few architectures that use DISCONTIGMEM without NUMA are easily updated to use memblock_add_node() instead of memblock_add() and thus have proper correspondence of memblock regions to NUMA nodes. Still, free_area_init_node() must have a backward compatible version because its semantics with and without CONFIG_HAVE_MEMBLOCK_NODE_MAP is different. Once all the architectures will use the new semantics, the entire compatibility layer can be dropped. To avoid addition of extra run time memory to store node id for architectures that keep memblock but have only a single node, the node id field of the memblock_region is guarded by CONFIG_NEED_MULTIPLE_NODES and the corresponding accessors presume that in those cases it is always 0. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Hoan Tran <hoan@os.amperecomputing.com> [arm64] Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Baoquan He <bhe@redhat.com> Cc: Brian Cain <bcain@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200412194859.12663-4-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02sparc32: mm: Disable SPLIT_PTLOCK_CPUSWill Deacon1-0/+4
The SRMMU page-table allocator is not compatible with SPLIT_PTLOCK_CPUS for two major reasons: 1. Pages are allocated via memblock, and therefore the ptl is not cleared by prep_new_page(), which is expected by ptlock_init() 2. Multiple PTE tables can exist in a single page, causing them to share the same ptl and deadlock when attempting to take the same lock twice (e.g. as part of copy_page_range()). Ensure that SPLIT_PTLOCK_CPUS is not selected for SPARC32. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-02mm: only allow page table mappings for built-in zsmallocChristoph Hellwig1-1/+1
This allows to unexport map_vm_area and unmap_kernel_range, which are rather deep internal and should not be available to modules, as they for example allow fine grained control of mapping permissions, and also allow splitting the setup of a vmalloc area and the actual mapping and thus expose vmalloc internals. zsmalloc is typically built-in and continues to work (just like the percpu-vm code using a similar patter), while modular zsmalloc also continues to work, but must use copies. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Gao Xiang <xiang@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Kelley <mikelley@microsoft.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Wei Liu <wei.liu@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Link: http://lkml.kernel.org/r/20200414131348.444715-12-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02mm: rename CONFIG_PGTABLE_MAPPING to CONFIG_ZSMALLOC_PGTABLE_MAPPINGChristoph Hellwig1-1/+1
Rename the Kconfig variable to clarify the scope. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Gao Xiang <xiang@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Kelley <mikelley@microsoft.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Wei Liu <wei.liu@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Link: http://lkml.kernel.org/r/20200414131348.444715-11-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-08Merge tag 'libnvdimm-for-5.7' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm and dax updates from Dan Williams: "There were multiple touches outside of drivers/nvdimm/ this round to add cross arch compatibility to the devm_memremap_pages() interface, enhance numa information for persistent memory ranges, and add a zero_page_range() dax operation. This cycle I switched from the patchwork api to Konstantin's b4 script for collecting tags (from x86, PowerPC, filesystem, and device-mapper folks), and everything looks to have gone ok there. This has all appeared in -next with no reported issues. Summary: - Add support for region alignment configuration and enforcement to fix compatibility across architectures and PowerPC page size configurations. - Introduce 'zero_page_range' as a dax operation. This facilitates filesystem-dax operation without a block-device. - Introduce phys_to_target_node() to facilitate drivers that want to know resulting numa node if a given reserved address range was onlined. - Advertise a persistence-domain for of_pmem and papr_scm. The persistence domain indicates where cpu-store cycles need to reach in the platform-memory subsystem before the platform will consider them power-fail protected. - Promote numa_map_to_online_node() to a cross-kernel generic facility. - Save x86 numa information to allow for node-id lookups for reserved memory ranges, deploy that capability for the e820-pmem driver. - Pick up some miscellaneous minor fixes, that missed v5.6-final, including a some smatch reports in the ioctl path and some unit test compilation fixups. - Fixup some flexible-array declarations" * tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (29 commits) dax: Move mandatory ->zero_page_range() check in alloc_dax() dax,iomap: Add helper dax_iomap_zero() to zero a range dax: Use new dax zero page method for zeroing a page dm,dax: Add dax zero_page_range operation s390,dcssblk,dax: Add dax zero_page_range operation to dcssblk driver dax, pmem: Add a dax operation zero_page_range pmem: Add functions for reading/writing page to/from pmem libnvdimm: Update persistence domain value for of_pmem and papr_scm device tools/test/nvdimm: Fix out of tree build libnvdimm/region: Fix build error libnvdimm/region: Replace zero-length array with flexible-array member libnvdimm/label: Replace zero-length array with flexible-array member ACPI: NFIT: Replace zero-length array with flexible-array member libnvdimm/region: Introduce an 'align' attribute libnvdimm/region: Introduce NDD_LABELING libnvdimm/namespace: Enforce memremap_compat_align() libnvdimm/pfn: Prevent raw mode fallback if pfn-infoblock valid libnvdimm: Out of bounds read in __nd_ioctl() acpi/nfit: improve bounds checking for 'func' mm/memremap_pages: Introduce memremap_compat_align() ...
2020-04-07mm/zswap: allow setting default status, compressor and allocator in KconfigMaciej S. Szmigiero1-1/+117
The compressed cache for swap pages (zswap) currently needs from 1 to 3 extra kernel command line parameters in order to make it work: it has to be enabled by adding a "zswap.enabled=1" command line parameter and if one wants a different compressor or pool allocator than the default lzo / zbud combination then these choices also need to be specified on the kernel command line in additional parameters. Using a different compressor and allocator for zswap is actually pretty common as guides often recommend using the lz4 / z3fold pair instead of the default one. In such case it is also necessary to remember to enable the appropriate compression algorithm and pool allocator in the kernel config manually. Let's avoid the need for adding these kernel command line parameters and automatically pull in the dependencies for the selected compressor algorithm and pool allocator by adding an appropriate default switches to Kconfig. The default values for these options match what the code was using previously as its defaults. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vitaly Wool <vitaly.wool@konsulko.com> Link: http://lkml.kernel.org/r/20200202000112.456103-1-mail@maciej.szmigiero.name Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07mm: introduce Reported pagesAlexander Duyck1-0/+11
In order to pave the way for free page reporting in virtualized environments we will need a way to get pages out of the free lists and identify those pages after they have been returned. To accomplish this, this patch adds the concept of a Reported Buddy, which is essentially meant to just be the Uptodate flag used in conjunction with the Buddy page type. To prevent the reported pages from leaking outside of the buddy lists I added a check to clear the PageReported bit in the del_page_from_free_list function. As a result any reported page that is split, merged, or allocated will have the flag cleared prior to the PageBuddy value being cleared. The process for reporting pages is fairly simple. Once we free a page that meets the minimum order for page reporting we will schedule a worker thread to start 2s or more in the future. That worker thread will begin working from the lowest supported page reporting order up to MAX_ORDER - 1 pulling unreported pages from the free list and storing them in the scatterlist. When processing each individual free list it is necessary for the worker thread to release the zone lock when it needs to stop and report the full scatterlist of pages. To reduce the work of the next iteration the worker thread will rotate the free list so that the first unreported page in the free list becomes the first entry in the list. It will then call a reporting function providing information on how many entries are in the scatterlist. Once the function completes it will return the pages to the free area from which they were allocated and start over pulling more pages from the free areas until there are no longer enough pages to report on to keep the worker busy, or we have processed as many pages as were contained in the free area when we started processing the list. The worker thread will work in a round-robin fashion making its way though each zone requesting reporting, and through each reportable free list within that zone. Once all free areas within the zone have been processed it will check to see if there have been any requests for reporting while it was processing. If so it will reschedule the worker thread to start up again in roughly 2s and exit. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nitesh Narayan Lal <nitesh@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pagupta@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Yang Zhang <yang.zhang.wz@gmail.com> Cc: wei qi <weiqi4@huawei.com> Link: http://lkml.kernel.org/r/20200211224635.29318.19750.stgit@localhost.localdomain Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07mm: remove CONFIG_TRANSPARENT_HUGE_PAGECACHEMatthew Wilcox (Oracle)1-5/+1
Commit e496cf3d7821 ("thp: introduce CONFIG_TRANSPARENT_HUGE_PAGECACHE") notes that it should be reverted when the PowerPC problem was fixed. The commit fixing the PowerPC problem (953c66c2b22a) did not revert the commit; instead setting CONFIG_TRANSPARENT_HUGE_PAGECACHE to the same as CONFIG_TRANSPARENT_HUGEPAGE. Checking with Kirill and Aneesh, this was an oversight, so remove the Kconfig symbol and undo the work of commit e496cf3d7821. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Link: http://lkml.kernel.org/r/20200318140253.6141-6-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-17x86/mm: Introduce CONFIG_NUMA_KEEP_MEMINFODan Williams1-0/+5
Currently x86 numa_meminfo is marked __initdata in the CONFIG_MEMORY_HOTPLUG=n case. In support of a new facility to allow drivers to map reserved memory to a 'target_node' (phys_to_target_node()), add support for removing the __initdata designation for those users. Both memory hotplug and phys_to_target_node() users select CONFIG_NUMA_KEEP_MEMINFO to tell the arch to maintain its physical address to NUMA mapping infrastructure post init. Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <x86@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/158188326422.894464.15742054998046628934.stgit@dwillia2-desk3.amr.corp.intel.com
2019-12-01mm/Kconfig: fix trivial help text punctuationRandy Dunlap1-1/+1
End a Kconfig help text sentence with a period (aka full stop). Link: http://lkml.kernel.org/r/c17f2c75-dc2a-42a4-2229-bb6b489addf2@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01mm/Kconfig: fix indentationKrzysztof Kozlowski1-19/+19
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ / /' -i */Kconfig Link: http://lkml.kernel.org/r/1574306437-28837-1-git-send-email-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Kosina <trivial@kernel.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-30Merge tag 'for-linus-hmm' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull hmm updates from Jason Gunthorpe: "This is another round of bug fixing and cleanup. This time the focus is on the driver pattern to use mmu notifiers to monitor a VA range. This code is lifted out of many drivers and hmm_mirror directly into the mmu_notifier core and written using the best ideas from all the driver implementations. This removes many bugs from the drivers and has a very pleasing diffstat. More drivers can still be converted, but that is for another cycle. - A shared branch with RDMA reworking the RDMA ODP implementation - New mmu_interval_notifier API. This is focused on the use case of monitoring a VA and simplifies the process for drivers - A common seq-count locking scheme built into the mmu_interval_notifier API usable by drivers that call get_user_pages() or hmm_range_fault() with the VA range - Conversion of mlx5 ODP, hfi1, radeon, nouveau, AMD GPU, and Xen GntDev drivers to the new API. This deletes a lot of wonky driver code. - Two improvements for hmm_range_fault(), from testing done by Ralph" * tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: mm/hmm: remove hmm_range_dma_map and hmm_range_dma_unmap mm/hmm: make full use of walk_page_range() xen/gntdev: use mmu_interval_notifier_insert mm/hmm: remove hmm_mirror and related drm/amdgpu: Use mmu_interval_notifier instead of hmm_mirror drm/amdgpu: Use mmu_interval_insert instead of hmm_mirror drm/amdgpu: Call find_vma under mmap_sem nouveau: use mmu_interval_notifier instead of hmm_mirror nouveau: use mmu_notifier directly for invalidate_range_start drm/radeon: use mmu_interval_notifier_insert RDMA/hfi1: Use mmu_interval_notifier_insert for user_exp_rcv RDMA/odp: Use mmu_interval_notifier_insert() mm/hmm: define the pre-processor related parts of hmm.h even if disabled mm/hmm: allow hmm_range to be used with a mmu_interval_notifier or hmm_mirror mm/mmu_notifier: add an interval tree notifier mm/mmu_notifier: define the header pre-processor parts even if disabled mm/hmm: allow snapshot of the special zero page
2019-11-23mm/hmm: remove hmm_mirror and relatedJason Gunthorpe1-1/+0
The only two users of this are now converted to use mmu_interval_notifier, delete all the code and update hmm.rst. Link: https://lore.kernel.org/r/20191112202231.3856-14-jgg@ziepe.ca Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Tested-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-11-23mm/mmu_notifier: add an interval tree notifierJason Gunthorpe1-0/+1
Of the 13 users of mmu_notifiers, 8 of them use only invalidate_range_start/end() and immediately intersect the mmu_notifier_range with some kind of internal list of VAs. 4 use an interval tree (i915_gem, radeon_mn, umem_odp, hfi1). 4 use a linked list of some kind (scif_dma, vhost, gntdev, hmm) And the remaining 5 either don't use invalidate_range_start() or do some special thing with it. It turns out that building a correct scheme with an interval tree is pretty complicated, particularly if the use case is synchronizing against another thread doing get_user_pages(). Many of these implementations have various subtle and difficult to fix races. This approach puts the interval tree as common code at the top of the mmu notifier call tree and implements a shareable locking scheme. It includes: - An interval tree tracking VA ranges, with per-range callbacks - A read/write locking scheme for the interval tree that avoids sleeping in the notifier path (for OOM killer) - A sequence counter based collision-retry locking scheme to tell device page fault that a VA range is being concurrently invalidated. This is based on various ideas: - hmm accumulates invalidated VA ranges and releases them when all invalidates are done, via active_invalidate_ranges count. This approach avoids having to intersect the interval tree twice (as umem_odp does) at the potential cost of a longer device page fault. - kvm/umem_odp use a sequence counter to drive the collision retry, via invalidate_seq - a deferred work todo list on unlock scheme like RTNL, via deferred_list. This makes adding/removing interval tree members more deterministic - seqlock, except this version makes the seqlock idea multi-holder on the write side by protecting it with active_invalidate_ranges and a spinlock To minimize MM overhead when only the interval tree is being used, the entire SRCU and hlist overheads are dropped using some simple branches. Similarly the interval tree overhead is dropped when in hlist mode. The overhead from the mandatory spinlock is broadly the same as most of existing users which already had a lock (or two) of some sort on the invalidation path. Link: https://lore.kernel.org/r/20191112202231.3856-3-jgg@ziepe.ca Acked-by: Christian König <christian.koenig@amd.com> Tested-by: Philip Yang <Philip.Yang@amd.com> Tested-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-11-06mm: Add write-protect and clean utilities for address space rangesThomas Hellstrom1-0/+3
Add two utilities to 1) write-protect and 2) clean all ptes pointing into a range of an address space. The utilities are intended to aid in tracking dirty pages (either driver-allocated system memory or pci device memory). The write-protect utility should be used in conjunction with page_mkwrite() and pfn_mkwrite() to trigger write page-faults on page accesses. Typically one would want to use this on sparse accesses into large memory regions. The clean utility should be used to utilize hardware dirtying functionality and avoid the overhead of page-faults, typically on large accesses into small memory regions. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Acked-by: Andrew Morton <akpm@linux-foundation.org>
2019-09-24mm,thp: add read-only THP support for (non-shmem) FSSong Liu1-0/+11
This patch is (hopefully) the first step to enable THP for non-shmem filesystems. This patch enables an application to put part of its text sections to THP via madvise, for example: madvise((void *)0x600000, 0x200000, MADV_HUGEPAGE); We tried to reuse the logic for THP on tmpfs. Currently, write is not supported for non-shmem THP. khugepaged will only process vma with VM_DENYWRITE. sys_mmap() ignores VM_DENYWRITE requests (see ksys_mmap_pgoff). The only way to create vma with VM_DENYWRITE is execve(). This requirement limits non-shmem THP to text sections. The next patch will handle writes, which would only happen when the all the vmas with VM_DENYWRITE are unmapped. An EXPERIMENTAL config, READ_ONLY_THP_FOR_FS, is added to gate this feature. [songliubraving@fb.com: fix build without CONFIG_SHMEM] Link: http://lkml.kernel.org/r/F53407FB-96CC-42E8-9862-105C92CC2B98@fb.com [songliubraving@fb.com: fix double unlock in collapse_file()] Link: http://lkml.kernel.org/r/B960CBFA-8EFC-4DA4-ABC5-1977FFF2CA57@fb.com Link: http://lkml.kernel.org/r/20190801184244.3169074-7-songliubraving@fb.com Signed-off-by: Song Liu <songliubraving@fb.com> Acked-by: Rik van Riel <riel@surriel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Hugh Dickins <hughd@google.com> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24mm: remove quicklist page table cachesNicholas Piggin1-5/+0
Patch series "mm: remove quicklist page table caches". A while ago Nicholas proposed to remove quicklist page table caches [1]. I've rebased his patch on the curren upstream and switched ia64 and sh to use generic versions of PTE allocation. [1] https://lore.kernel.org/linux-mm/20190711030339.20892-1-npiggin@gmail.com This patch (of 3): Remove page table allocator "quicklists". These have been around for a long time, but have not got much traction in the last decade and are only used on ia64 and sh architectures. The numbers in the initial commit look interesting but probably don't apply anymore. If anybody wants to resurrect this it's in the git history, but it's unhelpful to have this code and divergent allocator behaviour for minor archs. Also it might be better to instead make more general improvements to page allocator if this is still so slow. Link: http://lkml.kernel.org/r/1565250728-21721-2-git-send-email-rppt@linux.ibm.com Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-20mm: remove CONFIG_MIGRATE_VMA_HELPERChristoph Hellwig1-3/+0
CONFIG_MIGRATE_VMA_HELPER guards helpers that are required for proper devic private memory support. Remove the option and just check for CONFIG_DEVICE_PRIVATE instead. Link: https://lore.kernel.org/r/20190814075928.23766-11-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Tested-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-07mm/hmm: make HMM_MIRROR an implicit optionChristoph Hellwig1-8/+6
Make HMM_MIRROR an option that is selected by drivers wanting to use it instead of a user visible option as it is just a low-level implementation detail. Link: https://lore.kernel.org/r/20190806160554.14046-15-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-07mm/hmm: allow HMM_MIRROR on all architectures with MMUChristoph Hellwig1-2/+1
There isn't really any architecture specific code in this page table walk implementation, so drop the dependencies. Link: https://lore.kernel.org/r/20190806160554.14046-14-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-16mm: introduce ARCH_HAS_PTE_DEVMAPRobin Murphy1-3/+2
ARCH_HAS_ZONE_DEVICE is somewhat meaningless in itself, and combined with the long-out-of-date comment can lead to the impression than an architecture may just enable it (since __add_pages() now "comprehends device memory" for itself) and expect things to work. In practice, however, ZONE_DEVICE users have little chance of functioning correctly without __HAVE_ARCH_PTE_DEVMAP, so let's clean that up the same way as ARCH_HAS_PTE_SPECIAL and make it the proper dependency so the real situation is clearer. Link: http://lkml.kernel.org/r/87554aa78478a02a63f2c4cf60a847279ae3eb3b.1558547956.git.robin.murphy@arm.com Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Oliver O'Halloran <oohall@gmail.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-14Merge tag 'for-linus-hmm' of ↵Linus Torvalds1-46/+4
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull HMM updates from Jason Gunthorpe: "Improvements and bug fixes for the hmm interface in the kernel: - Improve clarity, locking and APIs related to the 'hmm mirror' feature merged last cycle. In linux-next we now see AMDGPU and nouveau to be using this API. - Remove old or transitional hmm APIs. These are hold overs from the past with no users, or APIs that existed only to manage cross tree conflicts. There are still a few more of these cleanups that didn't make the merge window cut off. - Improve some core mm APIs: - export alloc_pages_vma() for driver use - refactor into devm_request_free_mem_region() to manage DEVICE_PRIVATE resource reservations - refactor duplicative driver code into the core dev_pagemap struct - Remove hmm wrappers of improved core mm APIs, instead have drivers use the simplified API directly - Remove DEVICE_PUBLIC - Simplify the kconfig flow for the hmm users and core code" * tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (42 commits) mm: don't select MIGRATE_VMA_HELPER from HMM_MIRROR mm: remove the HMM config option mm: sort out the DEVICE_PRIVATE Kconfig mess mm: simplify ZONE_DEVICE page private data mm: remove hmm_devmem_add mm: remove hmm_vma_alloc_locked_page nouveau: use devm_memremap_pages directly nouveau: use alloc_page_vma directly PCI/P2PDMA: use the dev_pagemap internal refcount device-dax: use the dev_pagemap internal refcount memremap: provide an optional internal refcount in struct dev_pagemap memremap: replace the altmap_valid field with a PGMAP_ALTMAP_VALID flag memremap: remove the data field in struct dev_pagemap memremap: add a migrate_to_ram method to struct dev_pagemap_ops memremap: lift the devmap_enable manipulation into devm_memremap_pages memremap: pass a struct dev_pagemap to ->kill and ->cleanup memremap: move dev_pagemap callbacks into a separate structure memremap: validate the pagemap type passed to devm_memremap_pages mm: factor out a devm_request_free_mem_region helper mm: export alloc_pages_vma ...
2019-07-12mm: move the powerpc hugepd code to mm/gup.cChristoph Hellwig1-0/+10
While only powerpc supports the hugepd case, the code is pretty generic and I'd like to keep all GUP internals in one place. Link: http://lkml.kernel.org/r/20190625143715.1689-15-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12mm: consolidate the get_user_pages* implementationsChristoph Hellwig1-0/+1
Always build mm/gup.c so that we don't have to provide separate nommu stubs. Also merge the get_user_pages_fast and __get_user_pages_fast stubs when HAVE_FAST_GUP into the main implementations, which will never call the fast path if HAVE_FAST_GUP is not set. This also ensures the new put_user_pages* helpers are available for nommu, as those are currently missing, which would create a problem as soon as we actually grew users for it. Link: http://lkml.kernel.org/r/20190625143715.1689-13-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12mm: rename CONFIG_HAVE_GENERIC_GUP to CONFIG_HAVE_FAST_GUPChristoph Hellwig1-1/+1
We only support the generic GUP now, so rename the config option to be more clear, and always use the mm/Kconfig definition of the symbol and select it from the arch Kconfigs. Link: http://lkml.kernel.org/r/20190625143715.1689-11-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: James Hogan <jhogan@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12mm: lift the x86_32 PAE version of gup_get_pte to common codeChristoph Hellwig1-0/+3
The split low/high access is the only non-READ_ONCE version of gup_get_pte that did show up in the various arch implemenations. Lift it to common code and drop the ifdef based arch override. Link: http://lkml.kernel.org/r/20190625143715.1689-4-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: James Hogan <jhogan@kernel.org> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-02mm: don't select MIGRATE_VMA_HELPER from HMM_MIRRORChristoph Hellwig1-1/+0
The migrate_vma helper is only used by noveau to migrate device private pages around. Other HMM_MIRROR users like amdgpu or infiniband don't need it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-02mm: remove the HMM config optionChristoph Hellwig1-23/+4
All the mm/hmm.c code is better keyed off HMM_MIRROR. Also let nouveau depend on it instead of the mix of a dummy dependency symbol plus the actually selected one. Drop various odd dependencies, as the code is pretty portable. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-02mm: sort out the DEVICE_PRIVATE Kconfig messChristoph Hellwig1-3/+2
The ZONE_DEVICE support doesn't depend on anything HMM related, just on various bits of arch support as indicated by the architecture. Also don't select the option from nouveau as it isn't present in many setups, and depend on it instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-02mm: remove MEMORY_DEVICE_PUBLIC supportChristoph Hellwig1-11/+0
The code hasn't been used since it was added to the tree, and doesn't appear to actually be usable. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-02mm: remove the unused ARCH_HAS_HMM_DEVICE Kconfig optionChristoph Hellwig1-10/+0
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-14Merge tag 'v5.2-rc4' into mauroJonathan Corbet1-0/+1
We need to pick up post-rc1 changes to various document files so they don't get lost in Mauro's massive RST conversion push.
2019-06-08docs: fix broken documentation linksMauro Carvalho Chehab1-1/+1
Mostly due to x86 and acpi conversion, several documentation links are still pointing to the old file. Fix them. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Reviewed-by: Wolfram Sang <wsa@the-dreams.de> Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com> Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-14mm/Kconfig: update "Memory Model" help textMike Rapoport1-25/+23
The help describing the memory model selection is outdated. It still says that SPARSEMEM is experimental and DISCONTIGMEM is a preferred over SPARSEMEM. Update the help text for the relevant options: * add a generic help for the "Memory Model" prompt * add description for FLATMEM * reduce the description of DISCONTIGMEM and add a deprecation note * prefer SPARSEMEM over DISCONTIGMEM Link: http://lkml.kernel.org/r/1556188531-20728-1-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14mm: memblock: make keeping memblock memory opt-in rather than opt-outMike Rapoport1-1/+1
Most architectures do not need the memblock memory after the page allocator is initialized, but only few enable ARCH_DISCARD_MEMBLOCK in the arch Kconfig. Replacing ARCH_DISCARD_MEMBLOCK with ARCH_KEEP_MEMBLOCK and inverting the logic makes it clear which architectures actually use memblock after system initialization and skips the necessity to add ARCH_DISCARD_MEMBLOCK to the architectures that are still missing that option. Link: http://lkml.kernel.org/r/1556102150-32517-1-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: Ley Foon Tan <lftan@altera.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14mm/hmm: add ARCH_HAS_HMM_MIRROR ARCH_HAS_HMM_DEVICE KconfigJérôme Glisse1-0/+16
Add 2 new Kconfig variables that are not used by anyone. I check that various make ARCH=somearch allmodconfig do work and do not complain. This new Kconfig needs to be added first so that device drivers that depend on HMM can be updated. Once drivers are updated then I can update the HMM Kconfig to depend on this new Kconfig in a followup patch. This is about solving Kconfig for HMM given that device driver are going through their own tree we want to avoid changing them from the mm tree. So plan is: 1 - Kernel release N add the new Kconfig to mm/Kconfig (this patch) 2 - Kernel release N+1 update driver to depend on new Kconfig ie stop using ARCH_HASH_HMM and start using ARCH_HAS_HMM_MIRROR and ARCH_HAS_HMM_DEVICE (one or the other or both depending on the driver) 3 - Kernel release N+2 remove ARCH_HASH_HMM and do final Kconfig update in mm/Kconfig Link: http://lkml.kernel.org/r/20190417211141.17580-1-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14mm: remove redundant 'default n' from Kconfig-sBartlomiej Zolnierkiewicz1-11/+0
'default n' is the default value for any bool or tristate Kconfig setting so there is no need to write it explicitly. Also since commit f467c5640c29 ("kconfig: only write '# CONFIG_FOO is not set' for visible symbols") the Kconfig behavior is the same regardless of 'default n' being present or not: ... One side effect of (and the main motivation for) this change is making the following two definitions behave exactly the same: config FOO bool config FOO bool default n With this change, neither of these will generate a '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied). That might make it clearer to people that a bare 'default n' is redundant. ... Link: http://lkml.kernel.org/r/c3385916-e4d4-37d3-b330-e6b7dff83a52@samsung.com Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 07:00:34 +0000