summaryrefslogtreecommitdiff
path: root/fs/ext4/ext4.h
AgeCommit message (Collapse)AuthorFilesLines
2020-10-28ext4: use generic casefolding supportDaniel Rosenberg1-12/+0
This switches ext4 over to the generic support provided in libfs. Since casefolded dentries behave the same in ext4 and f2fs, we decrease the maintenance burden by unifying them, and any optimizations will immediately apply to both. Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20201028050820.1636571-1-drosen@google.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-28ext4: use s_mount_flags instead of s_mount_state for fast commit stateHarshad Shirwadkar1-4/+4
Ext4's fast commit related transient states should use sb->s_mount_flags instead of persistent sb->s_mount_state. Fixes: 8016e29f4362 ("ext4: fast commit recovery path") Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201027044915.2553163-3-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-22Merge tag 'ext4_for_linus' of ↵Linus Torvalds1-10/+126
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "The siginificant new ext4 feature this time around is Harshad's new fast_commit mode. In addition, thanks to Mauricio for fixing a race where mmap'ed pages that are being changed in parallel with a data=journal transaction commit could result in bad checksums in the failure that could cause journal replays to fail. Also notable is Ritesh's buffered write optimization which can result in significant improvements on parallel write workloads. (The kernel test robot reported a 330.6% improvement on fio.write_iops on a 96 core system using DAX) Besides that, we have the usual miscellaneous cleanups and bug fixes" Link: https://lore.kernel.org/r/20200925071217.GO28663@shao2-debian * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (46 commits) ext4: fix invalid inode checksum ext4: add fast commit stats in procfs ext4: add a mount opt to forcefully turn fast commits on ext4: fast commit recovery path jbd2: fast commit recovery path ext4: main fast-commit commit path jbd2: add fast commit machinery ext4 / jbd2: add fast commit initialization ext4: add fast_commit feature and handling for extended mount options doc: update ext4 and journalling docs to include fast commit feature ext4: Detect already used quota file early jbd2: avoid transaction reuse after reformatting ext4: use the normal helper to get the actual inode ext4: fix bs < ps issue reported with dioread_nolock mount opt ext4: data=journal: write-protect pages on j_submit_inode_data_buffers() ext4: data=journal: fixes for ext4_page_mkwrite() jbd2, ext4, ocfs2: introduce/use journal callbacks j_submit|finish_inode_data_buffers() jbd2: introduce/export functions jbd2_journal_submit|finish_inode_data_buffers() ext4: introduce ext4_sb_bread_unmovable() to replace sb_bread_unmovable() ext4: use ext4_sb_bread() instead of sb_bread() ...
2020-10-21ext4: add fast commit stats in procfsHarshad Shirwadkar1-1/+1
This commit adds a file in procfs that tracks fast commit related statistics. root@kvm-xfstests:/mnt# cat /proc/fs/ext4/vdc/fc_info fc stats: 7772 commits 15 ineligible 4083 numblks 2242us avg_commit_time Ineligible reasons: "Extended attributes changed": 0 "Cross rename": 0 "Journal flag changed": 0 "Insufficient memory": 0 "Swap boot": 0 "Resize": 0 "Dir renamed": 0 "Falloc range op": 0 "FC Commit Failed": 15 Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201015203802.3597742-10-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-21ext4: fast commit recovery pathHarshad Shirwadkar1-0/+26
This patch adds fast commit recovery path support for Ext4 file system. We add several helper functions that are similar in spirit to e2fsprogs journal recovery path handlers. Example of such functions include - a simple block allocator, idempotent block bitmap update function etc. Using these routines and the fast commit log in the fast commit area, the recovery path (ext4_fc_replay()) performs fast commit log recovery. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201015203802.3597742-8-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-21ext4: main fast-commit commit pathHarshad Shirwadkar1-0/+70
This patch adds main fast commit commit path handlers. The overall patch can be divided into two inter-related parts: (A) Metadata updates tracking This part consists of helper functions to track changes that need to be committed during a commit operation. These updates are maintained by Ext4 in different in-memory queues. Following are the APIs and their short description that are implemented in this patch: - ext4_fc_track_link/unlink/creat() - Track unlink. link and creat operations - ext4_fc_track_range() - Track changed logical block offsets inodes - ext4_fc_track_inode() - Track inodes - ext4_fc_mark_ineligible() - Mark file system fast commit ineligible() - ext4_fc_start_update() / ext4_fc_stop_update() / ext4_fc_start_ineligible() / ext4_fc_stop_ineligible() These functions are useful for co-ordinating inode updates with commits. (B) Main commit Path This part consists of functions to convert updates tracked in in-memory data structures into on-disk commits. Function ext4_fc_commit() is the main entry point to commit path. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201015203802.3597742-6-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-21ext4 / jbd2: add fast commit initializationHarshad Shirwadkar1-0/+4
This patch adds fast commit area trackers in the journal_t structure. These are initialized via the jbd2_fc_init() routine that this patch adds. This patch also adds ext4/fast_commit.c and ext4/fast_commit.h files for fast commit code that will be added in subsequent patches in this series. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201015203802.3597742-4-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-21ext4: add fast_commit feature and handling for extended mount optionsHarshad Shirwadkar1-0/+4
We are running out of mount option bits. Add handling for using s_mount_opt2. Add ext4 and jbd2 fast commit feature flag and also add ability to turn off the fast commit feature in Ext4. Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201015203802.3597742-3-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: introduce ext4_sb_bread_unmovable() to replace sb_bread_unmovable()zhangyi (F)1-0/+2
Now we only use sb_bread_unmovable() to read superblock and descriptor block at mount time, so there is no opportunity that we need to clear buffer verified bit and also handle buffer write_io error bit. But for the sake of unification, let's introduce ext4_sb_bread_unmovable() to replace all sb_bread_unmovable(). After this patch, we stop using read helpers in fs/buffer.c. Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Link: https://lore.kernel.org/r/20200924073337.861472-8-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: introduce ext4_sb_breadahead_unmovable() to replace ↵zhangyi (F)1-0/+1
sb_breadahead_unmovable() If we readahead inode tables in __ext4_get_inode_loc(), it may bypass buffer_write_io_error() check, so introduce ext4_sb_breadahead_unmovable() to handle this special case. This patch also replace sb_breadahead_unmovable() in ext4_fill_super() for the sake of unification. Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Link: https://lore.kernel.org/r/20200924073337.861472-6-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: introduce new metadata buffer read helperszhangyi (F)1-0/+5
The previous patch add clear_buffer_verified() before we read metadata block from disk again, but it's rather easy to miss clearing of this bit because currently we read metadata buffer through different open codes (e.g. ll_rw_block(), bh_submit_read() and invoke submit_bh() directly). So, it's time to add common helpers to unify in all the places reading metadata buffers instead. This patch add 3 helpers: - ext4_read_bh_nowait(): async read metadata buffer if it's actually not uptodate, clear buffer_verified bit before read from disk. - ext4_read_bh(): sync version of read metadata buffer, it will wait until the read operation return and check the return status. - ext4_read_bh_lock(): try to lock the buffer before read buffer, it will skip reading if the buffer is already locked. After this patch, we need to use these helpers in all the places reading metadata buffer instead of different open codes. Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Suggested-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200924073337.861472-3-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: make mb_check_counter per groupChunguang Xu1-0/+3
Make bb_check_counter per group, so each group has the same chance to be checked, which can expose errors more easily. Signed-off-by: Chunguang Xu <brookxu@tencent.com> Link: https://lore.kernel.org/r/1601292995-32205-2-git-send-email-brookxu@tencent.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: rename system_blks to s_system_blks inside ext4_sb_infoChunguang Xu1-1/+1
Rename system_blks to s_system_blks inside ext4_sb_info, keep the naming rules consistent with other variables, which is convenient for code reading and writing. Signed-off-by: Chunguang Xu <brookxu@tencent.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/1600916623-544-2-git-send-email-brookxu@tencent.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: rename journal_dev to s_journal_dev inside ext4_sb_infoChunguang Xu1-1/+1
Rename journal_dev to s_journal_dev inside ext4_sb_info, keep the naming rules consistent with other variables, which is convenient for code reading and writing. Signed-off-by: Chunguang Xu <brookxu@tencent.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/1600916623-544-1-git-send-email-brookxu@tencent.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: remove unused including <linux/version.h>Tian Tao1-1/+0
Remove including <linux/version.h> that don't need it. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Link: https://lore.kernel.org/r/1600397165-42873-1-git-send-email-tiantao6@hisilicon.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: disallow modifying DAX inode flag if inline_data has been setXiao Yang1-1/+1
inline_data is mutually exclusive to DAX so enabling both of them triggers the following issue: ------------------------------------------ # mkfs.ext4 -F -O inline_data /dev/pmem1 ... # mount /dev/pmem1 /mnt # echo 'test' >/mnt/file # lsattr -l /mnt/file /mnt/file Inline_Data # xfs_io -c "chattr +x" /mnt/file # xfs_io -c "lsattr -v" /mnt/file [dax] /mnt/file # umount /mnt # mount /dev/pmem1 /mnt # cat /mnt/file cat: /mnt/file: Numerical result out of range ------------------------------------------ Fixes: b383a73f2b83 ("fs/ext4: Introduce DAX inode flag") Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20200828084330.15776-1-yangx.jy@cn.fujitsu.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: do not interpret high bytes if 64bit feature is disabledPetr Malat1-6/+8
Fields s_free_blocks_count_hi, s_r_blocks_count_hi and s_blocks_count_hi are not valid if EXT4_FEATURE_INCOMPAT_64BIT is not enabled and should be treated as zeroes. Signed-off-by: Petr Malat <oss@malat.biz> Link: https://lore.kernel.org/r/20200825150016.3363-1-oss@malat.biz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-09-22fscrypt: handle test_dummy_encryption in more logical wayEric Biggers1-3/+3
The behavior of the test_dummy_encryption mount option is that when a new file (or directory or symlink) is created in an unencrypted directory, it's automatically encrypted using a dummy encryption policy. That's it; in particular, the encryption (or lack thereof) of existing files (or directories or symlinks) doesn't change. Unfortunately the implementation of test_dummy_encryption is a bit weird and confusing. When test_dummy_encryption is enabled and a file is being created in an unencrypted directory, we set up an encryption key (->i_crypt_info) for the directory. This isn't actually used to do any encryption, however, since the directory is still unencrypted! Instead, ->i_crypt_info is only used for inheriting the encryption policy. One consequence of this is that the filesystem ends up providing a "dummy context" (policy + nonce) instead of a "dummy policy". In commit ed318a6cc0b6 ("fscrypt: support test_dummy_encryption=v2"), I mistakenly thought this was required. However, actually the nonce only ends up being used to derive a key that is never used. Another consequence of this implementation is that it allows for 'inode->i_crypt_info != NULL && !IS_ENCRYPTED(inode)', which is an edge case that can be forgotten about. For example, currently FS_IOC_GET_ENCRYPTION_POLICY on an unencrypted directory may return the dummy encryption policy when the filesystem is mounted with test_dummy_encryption. That seems like the wrong thing to do, since again, the directory itself is not actually encrypted. Therefore, switch to a more logical and maintainable implementation where the dummy encryption policy inheritance is done without setting up keys for unencrypted directories. This involves: - Adding a function fscrypt_policy_to_inherit() which returns the encryption policy to inherit from a directory. This can be a real policy, a dummy policy, or no policy. - Replacing struct fscrypt_dummy_context, ->get_dummy_context(), etc. with struct fscrypt_dummy_policy, ->get_dummy_policy(), etc. - Making fscrypt_fname_encrypted_size() take an fscrypt_policy instead of an inode. Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Acked-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20200917041136.178600-13-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-08-19ext4: limit the length of per-inode prealloc listbrookxu1-1/+3
In the scenario of writing sparse files, the per-inode prealloc list may be very long, resulting in high overhead for ext4_mb_use_preallocated(). To circumvent this problem, we limit the maximum length of per-inode prealloc list to 512 and allow users to modify it. After patching, we observed that the sys ratio of cpu has dropped, and the system throughput has increased significantly. We created a process to write the sparse file, and the running time of the process on the fixed kernel was significantly reduced, as follows: Running time on unfixed kernel： [root@TENCENT64 ~]# time taskset 0x01 ./sparse /data1/sparce.dat real 0m2.051s user 0m0.008s sys 0m2.026s Running time on fixed kernel： [root@TENCENT64 ~]# time taskset 0x01 ./sparse /data1/sparce.dat real 0m0.471s user 0m0.004s sys 0m0.395s Signed-off-by: Chunguang Xu <brookxu@tencent.com> Link: https://lore.kernel.org/r/d7a98178-056b-6db5-6bce-4ead23f4a257@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-18ext4: remove unused parameter of ext4_generic_delete_entry functionKyoungho Koo1-2/+1
The ext4_generic_delete_entry function does not use the parameter handle, so it can be removed. Signed-off-by: Kyoungho Koo <rnrudgh@gmail.com> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/20200810080701.GA14160@koo-Z370-HD3 Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-07ext4: check journal inode extents more carefullyJan Kara1-3/+3
Currently, system zones just track ranges of block, that are "important" fs metadata (bitmaps, group descriptors, journal blocks, etc.). This however complicates how extent tree (or indirect blocks) can be checked for inodes that actually track such metadata - currently the journal inode but arguably we should be treating quota files or resize inode similarly. We cannot run __ext4_ext_check() on such metadata inodes when loading their extents as that would immediately trigger the validity checks and so we just hack around that and special-case the journal inode. This however leads to a situation that a journal inode which has extent tree of depth at least one can have invalid extent tree that gets unnoticed until ext4_cache_extents() crashes. To overcome this limitation, track inode number each system zone belongs to (0 is used for zones not belonging to any inode). We can then verify inode number matches the expected one when verifying extent tree and thus avoid the false errors. With this there's no need to to special-case journal inode during extent tree checking anymore so remove it. Fixes: 0a944e8a6c66 ("ext4: don't perform block validity checks on the journal inode") Reported-by: Wolfgang Frisch <wolfgang.frisch@suse.com> Reviewed-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200728130437.7804-4-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-07ext4: export msg_count and warning_count via sysfsDmitry Monakhov1-0/+2
This numbers can be analized by system automation similar to errors_count. In ideal world it would be nice to have separate counters for different log-levels, but this makes this patch too intrusive. Signed-off-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru> Link: https://lore.kernel.org/r/20200725123313.4467-1-dmtrmonakhov@yandex-team.ru Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-07ext4: remove some redundant function declarationsShijie Luo1-6/+0
ext4 update feature functions do not exist now, remove these useless function declarations. Signed-off-by: Shijie Luo <luoshijie1@huawei.com> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/20200724032954.22097-1-luoshijie1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-07ext4: add prefetch_block_bitmaps mount optionTheodore Ts'o1-1/+14
For file systems where we can afford to keep the buddy bitmaps cached, we can speed up initial writes to large file systems by starting to load the block allocation bitmaps as soon as the file system is mounted. This won't work well for _super_ large file systems, or memory constrained systems, so we only enable this when it is requested via a mount option. Addresses-Google-Bug: 159488342 Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Andreas Dilger <adilger@dilger.ca>
2020-08-07ext4: abort the filesystem if failed to async write metadata bufferzhangyi (F)1-0/+3
There is a risk of filesystem inconsistency if we failed to async write back metadata buffer in the background. Because of current buffer's end io procedure is handled by end_buffer_async_write() in the block layer, and it only clear the buffer's uptodate flag and mark the write_io_error flag, so ext4 cannot detect such failure immediately. In most cases of getting metadata buffer (e.g. ext4_read_inode_bitmap()), although the buffer's data is actually uptodate, it may still read data from disk because the buffer's uptodate flag has been cleared. Finally, it may lead to on-disk filesystem inconsistency if reading old data from the disk successfully and write them out again. This patch detect bdev mapping->wb_err when getting journal's write access and mark the filesystem error if bdev's mapping->wb_err was increased, this could prevent further writing and potential inconsistency. Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Suggested-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200620025427.1756360-2-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-06ext4: add prefetching for block allocation bitmapsAlex Zhuravlev1-1/+7
This should significantly improve bitmap loading, especially for flex groups as it tries to load all bitmaps within a flex.group instead of one by one synchronously. Prefetching is done in 8 * flex_bg groups, so it should be 8 read-ahead reads for a single allocating thread. At the end of allocation the thread waits for read-ahead completion and initializes buddy information so that read-aheads are not lost in case of memory pressure. At cr=0 the number of prefetching IOs is limited per allocation context to prevent a situation when mballoc loads thousands of bitmaps looking for a perfect group and ignoring groups with good chunks. Together with the patch "ext4: limit scanning of uninitialized groups" the mount time (which includes few tiny allocations) of a 1PB filesystem is reduced significantly: 0% full 50%-full unpatched patched mount time 33s 9279s 563s [ Restructured by tytso; removed the state flags in the allocation context, so it can be used to lazily prefetch the allocation bitmaps immediately after the file system is mounted. Skip prefetching block groups which are uninitialized. Finally pass in the REQ_RAHEAD flag to the block layer while prefetching. ] Signed-off-by: Alex Zhuravlev <bzzz@whamcloud.com> Reviewed-by: Andreas Dilger <adilger@whamcloud.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-06ext4: use generic names for generic ioctlsEric Biggers1-11/+1
Don't define EXT4_IOC_* aliases to ioctls that already have a generic FS_IOC_* name. These aliases are unnecessary, and they make it unclear which ioctls are ext4-specific and which are generic. Exception: leave EXT4_IOC_GETVERSION_OLD and EXT4_IOC_SETVERSION_OLD as-is for now, since renaming them to FS_IOC_GETVERSION and FS_IOC_SETVERSION would probably make them more likely to be confused with EXT4_IOC_GETVERSION and EXT4_IOC_SETVERSION which also exist. Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200714230909.56349-1-ebiggers@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-06ext4: don't hardcode bit values in EXT4_FL_USER_*Eric Biggers1-2/+28
Define the EXT4_FL_USER_* constants by OR-ing together the appropriate flags, rather than hard-coding a numeric value. This makes it much easier to see which flags are listed. No change in the actual values. Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200713031012.192440-1-ebiggers@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-06-15Merge tag 'ext4-for-linus-5.8-rc1-2' of ↵Linus Torvalds1-7/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull more ext4 updates from Ted Ts'o: "This is the second round of ext4 commits for 5.8 merge window [1]. It includes the per-inode DAX support, which was dependant on the DAX infrastructure which came in via the XFS tree, and a number of regression and bug fixes; most notably the "BUG: using smp_processor_id() in preemptible code in ext4_mb_new_blocks" reported by syzkaller" [1] The pull request actually came in 15 minutes after I had tagged the rc1 release. Tssk, tssk, late.. - Linus * tag 'ext4-for-linus-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4, jbd2: ensure panic by fix a race between jbd2 abort and ext4 error handlers ext4: support xattr gnu.* namespace for the Hurd ext4: mballoc: Use this_cpu_read instead of this_cpu_ptr ext4: avoid utf8_strncasecmp() with unstable name ext4: stop overwrite the errcode in ext4_setup_super ext4: fix partial cluster initialization when splitting extent ext4: avoid race conditions when remounting with options that change dax Documentation/dax: Update DAX enablement for ext4 fs/ext4: Introduce DAX inode flag fs/ext4: Remove jflag variable fs/ext4: Make DAX mount option a tri-state fs/ext4: Only change S_DAX on inode load fs/ext4: Update ext4_should_use_dax() fs/ext4: Change EXT4_MOUNT_DAX to EXT4_MOUNT_DAX_ALWAYS fs/ext4: Disallow verity if inode is DAX fs/ext4: Narrow scope of DAX check in setflags
2020-06-11Enable ext4 support for per-file/directory dax operationsTheodore Ts'o1-7/+20
This adds the same per-file/per-directory DAX support for ext4 as was done for xfs, now that we finally have consensus over what the interface should be.
2020-06-05Merge tag 'ext4_for_linus' of ↵Linus Torvalds1-14/+26
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "A lot of bug fixes and cleanups for ext4, including: - Fix performance problems found in dioread_nolock now that it is the default, caused by transaction leaks. - Clean up fiemap handling in ext4 - Clean up and refactor multiple block allocator (mballoc) code - Fix a problem with mballoc with a smaller file systems running out of blocks because they couldn't properly use blocks that had been reserved by inode preallocation. - Fixed a race in ext4_sync_parent() versus rename() - Simplify the error handling in the extent manipulation code - Make sure all metadata I/O errors are felected to ext4_ext_dirty()'s and ext4_make_inode_dirty()'s callers. - Avoid passing an error pointer to brelse in ext4_xattr_set() - Fix race which could result to freeing an inode on the dirty last in data=journal mode. - Fix refcount handling if ext4_iget() fails - Fix a crash in generic/019 caused by a corrupted extent node" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (58 commits) ext4: avoid unnecessary transaction starts during writeback ext4: don't block for O_DIRECT if IOCB_NOWAIT is set ext4: remove the access_ok() check in ext4_ioctl_get_es_cache fs: remove the access_ok() check in ioctl_fiemap fs: handle FIEMAP_FLAG_SYNC in fiemap_prep fs: move fiemap range validation into the file systems instances iomap: fix the iomap_fiemap prototype fs: move the fiemap definitions out of fs.h fs: mark __generic_block_fiemap static ext4: remove the call to fiemap_check_flags in ext4_fiemap ext4: split _ext4_fiemap ext4: fix fiemap size checks for bitmap files ext4: fix EXT4_MAX_LOGICAL_BLOCK macro add comment for ext4_dir_entry_2 file_type member jbd2: avoid leaking transaction credits when unreserving handle ext4: drop ext4_journal_free_reserved() ext4: mballoc: use lock for checking free blocks while retrying ext4: mballoc: refactor ext4_mb_good_group() ext4: mballoc: introduce pcpu seqcnt for freeing PA to improve ENOSPC handling ext4: mballoc: refactor ext4_mb_discard_preallocations() ...
2020-06-03fs: move the fiemap definitions out of fs.hChristoph Hellwig1-0/+1
No need to pull the fiemap definitions into almost every file in the kernel build. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Link: https://lore.kernel.org/r/20200523073016.2944131-5-hch@lst.de Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-06-03ext4: fix EXT4_MAX_LOGICAL_BLOCK macroRitesh Harjani1-1/+1
ext4 supports max number of logical blocks in a file to be 0xffffffff. (This is since ext4_extent's ee_block is __le32). This means that EXT4_MAX_LOGICAL_BLOCK should be 0xfffffffe (starting from 0 logical offset). This patch fixes this. The issue was seen when ext4 moved to iomap_fiemap API and when overlayfs was mounted on top of ext4. Since overlayfs was missing filemap_check_ranges(), so it could pass a arbitrary huge length which lead to overflow of map.m_len logic. This patch fixes that. Fixes: d3b6f23f7167 ("ext4: move ext4_fiemap to use iomap framework") Reported-by: syzbot+77fa5bdb65cc39711820@syzkaller.appspotmail.com Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20200505154324.3226743-2-hch@lst.de Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-06-03add comment for ext4_dir_entry_2 file_type memberJonathan Grant1-1/+1
Signed-off-by: Jonathan Grant <jg@jguk.org> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/ad3290d5-86af-99c1-f9d5-cd1bab710429@jguk.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-06-03ext4: mballoc: use lock for checking free blocks while retryingRitesh Harjani1-0/+2
Currently while doing block allocation grp->bb_free may be getting modified if discard is happening in parallel. For e.g. consider a case where there are lot of threads who have preallocated lot of blocks and there is a thread which is trying to discard all of this group's PA. Now it could happen that we see all of those group's bb_free is zero and fail the allocation while there is sufficient space if we free up all the PA. So this patch adds another flag "EXT4_MB_STRICT_CHECK" which will be set if we are unable to allocate any blocks in the first try (since we may not have considered blocks about to be discarded from PA lists). So during retry attempt to allocate blocks we will use ext4_lock_group() for checking if the group is good or not. Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/9cb740a117c958c36596f167b12af1beae9a68b7.1589955723.git.riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-06-03ext4: add casefold flag to EXT4_INODE_* flagsEric Biggers1-1/+3
No one currently needs EXT4_INODE_CASEFOLD, but add it to keep the EXT4_INODE_* definitions in sync with the EXT4_*_FL definitions. Also make it clearer that the casefold flag is only for directories. Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20200510215252.87833-1-ebiggers@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-06-03ext4: make ext_debug() implementation to use pr_debug()Ritesh Harjani1-5/+13
ext_debug() msgs could be helpful, provided those could be enabled without recompiling kernel and also if we could selectively enable only required prints for case by case debugging. So make ext_debug() implementation use pr_debug(). Also change ext_debug() to be defined with CONFIG_EXT4_DEBUG. So EXT_DEBUG macro now mostly remain for below 3 functions. ext4_ext_show_path/leaf/move() (whose print msgs use ext_debug() which again could be dynamically enabled using pr_debug()) This also changes the ext_debug() to take inode as a parameter to add inode no. in all of it's msgs. Prints additional info like process name / pid, superblock id etc. This also removes any explicit function names passed in ext_debug(). Since ext_debug() on it's own prints file, func and line no. Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/d31dc189b0aeda9384fe7665e36da7cd8c61571f.1589086800.git.riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-06-03ext4: use BIT() macro for BH_** state bitsRitesh Harjani1-4/+4
Simply use BIT() macro for all BH_** state bits instead of open coding it. There should be no functionality change in this patch. Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/57667689f51a3f9dba2fcef7d3425187fa3ba69f.1589086800.git.riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-06-03ext4: avoid ext4_error()'s caused by ENOMEM in the truncate pathTheodore Ts'o1-0/+1
We can't fail in the truncate path without requiring an fsck. Add work around for this by using a combination of retry loops and the __GFP_NOFAIL flag. From: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Anna Pendleton <pendleton@google.com> Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20200507175028.15061-1-pendleton@google.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-06-03ext4: handle ext4_mark_inode_dirty errorsHarshad Shirwadkar1-1/+1
ext4_mark_inode_dirty() can fail for real reasons. Ignoring its return value may lead ext4 to ignore real failures that would result in corruption / crashes. Harden ext4_mark_inode_dirty error paths to fail as soon as possible and return errors to the caller whenever appropriate. One of the possible scnearios when this bug could affected is that while creating a new inode, its directory entry gets added successfully but while writing the inode itself mark_inode_dirty returns error which is ignored. This would result in inconsistency that the directory entry points to a non-existent inode. Ran gce-xfstests smoke tests and verified that there were no regressions. Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20200427013438.219117-1-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-06-03ext4: remove EXT4_GET_BLOCKS_KEEP_SIZE flagEric Whitney1-2/+0
The eofblocks code was removed in the 5.7 release by "ext4: remove EOFBLOCKS_FL and associated code" (4337ecd1fe99). The ext4_map_blocks() flag used to trigger it can now be removed as well. Signed-off-by: Eric Whitney <enwlinux@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200415203140.30349-2-enwlinux@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-06-02ext4: pass the inode to ext4_mpage_readpagesMatthew Wilcox (Oracle)1-1/+1
This function now only uses the mapping argument to look up the inode, and both callers already have the inode, so just pass the inode instead of the mapping. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Dave Chinner <dchinner@redhat.com> Cc: Gao Xiang <gaoxiang25@huawei.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Miklos Szeredi <mszeredi@redhat.com> Link: http://lkml.kernel.org/r/20200414150233.24495-22-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02ext4: convert from readpages to readaheadMatthew Wilcox (Oracle)1-2/+1
Use the new readahead operation in ext4 Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Dave Chinner <dchinner@redhat.com> Cc: Gao Xiang <gaoxiang25@huawei.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Miklos Szeredi <mszeredi@redhat.com> Link: http://lkml.kernel.org/r/20200414150233.24495-21-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-01Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscryptLinus Torvalds1-3/+4
Pull fscrypt updates from Eric Biggers: - Add the IV_INO_LBLK_32 encryption policy flag which modifies the encryption to be optimized for eMMC inline encryption hardware. - Make the test_dummy_encryption mount option for ext4 and f2fs support v2 encryption policies. - Fix kerneldoc warnings and some coding style inconsistencies. * tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: fscrypt: add support for IV_INO_LBLK_32 policies fscrypt: make test_dummy_encryption use v2 by default fscrypt: support test_dummy_encryption=v2 fscrypt: add fscrypt_add_test_dummy_key() linux/parser.h: add include guards fscrypt: remove unnecessary extern keywords fscrypt: name all function parameters fscrypt: fix all kerneldoc warnings
2020-05-28fs/ext4: Introduce DAX inode flagIra Weiny1-4/+14
Add a flag ([EXT4|FS]_DAX_FL) to preserve FS_XFLAG_DAX in the ext4 inode. Set the flag to be user visible and changeable. Set the flag to be inherited. Allow applications to change the flag at any time except if it conflicts with the set of mutually exclusive flags (Currently VERITY, ENCRYPT, JOURNAL_DATA). Furthermore, restrict setting any of the exclusive flags if DAX is set. While conceptually possible, we do not allow setting EXT4_DAX_FL while at the same time clearing exclusion flags (or vice versa) for 2 reasons: 1) The DAX flag does not take effect immediately which introduces quite a bit of complexity 2) There is no clear use case for being this flexible Finally, on regular files, flag the inode to not be cached to facilitate changing S_DAX on the next creation of the inode. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/20200528150003.828793-9-ira.weiny@intel.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-05-28fs/ext4: Make DAX mount option a tri-stateIra Weiny1-0/+2
We add 'always', 'never', and 'inode' (default). '-o dax' continues to operate the same which is equivalent to 'always'. This new functionality is limited to ext4 only. Specifically we introduce a 2nd DAX mount flag EXT4_MOUNT2_DAX_NEVER and set it and EXT4_MOUNT_DAX_ALWAYS appropriately for the mode. We also force EXT4_MOUNT2_DAX_NEVER if !CONFIG_FS_DAX. Finally, EXT4_MOUNT2_DAX_INODE is used solely to detect if the user specified that option for printing. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/20200528150003.828793-7-ira.weiny@intel.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-05-28fs/ext4: Only change S_DAX on inode loadIra Weiny1-1/+1
To prevent complications with in memory inodes we only set S_DAX on inode load. FS_XFLAG_DAX can be changed at any time and S_DAX will change after inode eviction and reload. Add init bool to ext4_set_inode_flags() to indicate if the inode is being newly initialized. Assert that S_DAX is not set on an inode which is just being loaded. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/20200528150003.828793-6-ira.weiny@intel.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-05-28fs/ext4: Update ext4_should_use_dax()Ira Weiny1-0/+1
S_DAX should only be enabled when the underlying block device supports dax. Cache the underlying support for DAX in the super block and modify ext4_should_use_dax() to check for device support prior to the over riding mount option. While we are at it change the function to ext4_should_enable_dax() as this better reflects the ask as well as matches xfs. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/20200528150003.828793-5-ira.weiny@intel.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-05-28fs/ext4: Change EXT4_MOUNT_DAX to EXT4_MOUNT_DAX_ALWAYSIra Weiny1-2/+2
In prep for the new tri-state mount option which then introduces EXT4_MOUNT_DAX_NEVER. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/20200528150003.828793-4-ira.weiny@intel.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-05-19ext4: fix EXT4_MAX_LOGICAL_BLOCK macroRitesh Harjani1-1/+1
ext4 supports max number of logical blocks in a file to be 0xffffffff. (This is since ext4_extent's ee_block is __le32). This means that EXT4_MAX_LOGICAL_BLOCK should be 0xfffffffe (starting from 0 logical offset). This patch fixes this. The issue was seen when ext4 moved to iomap_fiemap API and when overlayfs was mounted on top of ext4. Since overlayfs was missing filemap_check_ranges(), so it could pass a arbitrary huge length which lead to overflow of map.m_len logic. This patch fixes that. Fixes: d3b6f23f7167 ("ext4: move ext4_fiemap to use iomap framework") Reported-by: syzbot+77fa5bdb65cc39711820@syzkaller.appspotmail.com Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20200505154324.3226743-2-hch@lst.de Signed-off-by: Theodore Ts'o <tytso@mit.edu>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 14:52:24 +0000