summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/ti/cpts.c
AgeCommit message (Collapse)AuthorFilesLines
2020-08-19ethernet: ti: cpts: Use generic helper functionKurt Kanzenbach1-28/+14
In order to reduce code duplication between ptp drivers, generic helper functions were introduced. Use them. Suggested-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: ethernet: ti: cpts: add support for HW_TS_PUSH eventsGrygorii Strashko1-1/+48
Hence CPTS IRQ support is in place the W_TS_PUSH events can be added. PWM capable DmTimers can be used to generete input signals for CPTS on TI AM335x/AM437x/DRA7 SoCs to be timestamped: AM335x/AM437x: timer4 - timer7 DRA7/AM57xx: timer13 - timer16 Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: ethernet: ti: cpts: add irq supportGrygorii Strashko1-1/+22
Add CPTS IRQ support, but do not enable it. By default, the CPTS driver will continue working using polling mode which is required for CPTS to continue working on platforms other than CPSW, like Keystone 2. The CPTS IRQ support is required to enable support for HW_TS_PUSH events. The CPSW CPTS IRQ and HW_TS_PUSH events support will be enabled in follow up patches. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: ethernet: ti: cpts: rework lockingGrygorii Strashko1-23/+30
Now spinlock is used to synchronize everything which is not required. Add mutex and use to sync access to PTP interface and PTP worker and use spinlock only to sync FIFO/events processing. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: ethernet: ti: cpts: move tx timestamp processing to ptp worker onlyGrygorii Strashko1-71/+94
Now the tx timestamp processing happens from different contexts - softirq and thread/PTP worker. Enabling IRQ will add one more hard_irq context. This makes over all defered TX timestamp processing and locking overcomplicated. Move tx timestamp processing to PTP worker always instead. napi_rx->cpts_tx_timestamp if ptp_packet then push to txq ptp_schedule_worker() do_aux_work->cpts_overflow_check cpts_process_events() Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: ethernet: ti: cpts: optimize packet to event matchingGrygorii Strashko1-33/+58
Now the CPTS driver performs packet (skb) parsing every time when it needs to match packet to CPTS event (including ptp_classify_raw() calls). This patch optimizes matching process by parsing packet only once upon arrival and stores PTP specific data in skb->cb using the same fromat as in CPTS HW event. As result, all future matching reduces to comparing two u32 values. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: ethernet: ti: cpts: switch to use new .gettimex64() interfaceGrygorii Strashko1-8/+14
The CPTS HW latches and saves CPTS counter value in CPTS fifo immediately after writing to CPSW_CPTS_PUSH.TS_PUSH (bit 0), so the total time that the driver needs to read the CPTS timestamp is the time required CPSW_CPTS_PUSH write to actually reach HW. Hence switch CPTS driver to implement new .gettimex64() callback for more precise measurement of the offset between a PHC and the system clock which is measured as time between write(CPSW_CPTS_PUSH) read(CPSW_CPTS_PUSH) Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: ethernet: ti: cpts: move tc mult update in cpts_fifo_read()Grygorii Strashko1-2/+6
Now CPTS driver .adjfreq() generates request to read CPTS current time (CPTS_EV_PUSH) with intention to process all pending event using previous frequency adjustment values before switching to the new ones. So CPTS_EV_PUSH works as a marker to switch to the new frequency adjustment values. Current code assumes that all job is done in .adjfreq(), but after enabling IRQ this will not be true any more. Hence save new frequency adjustment values (mult) and perform actual freq adjustment in cpts_fifo_read() immediately after CPTS_EV_PUSH is received. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: ethernet: ti: cpts: separate hw counter read from timecounterGrygorii Strashko1-26/+27
Now CPTS HW time reading code is implemented in timecounter->cyclecounter .read() callback and performs following operations: timecounter_read() ->cc.read() -> cpts_systim_read() - request current CPTS HW time CPTS_TS_PUSH.TS_PUSH = 1 - poll CPTS FIFO for CPTS_EV_PUSH event with current HW timestamp This approach need to be changed for the future switch to PTP PHC .gettimex64() callback, which require to separate requesting current CPTS HW time and processing CPTS FIFO. And for the follow up patch, which improves .adjfreq() implementation. This patch moves code accessing CPTS HW out of timecounter code as following: - convert HW timestamp of every CPTS event to PTP time (us) and store it as part struct cpts_event; - add CPTS context field to store current CPTS HW time (counter) value and update it on CPTS_EV_PUSH reception; - move code accessing CPTS HW out of timecounter code and use current CPTS HW time (counter) from CPTS context instead; - ensure timecounter->cycle_last is updated on CPTS_EV_PUSH reception. After this change CPTS timecounter will only perform timekeeper role without actually accessing CPTS HW. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: ethernet: ti: cpts: use dev_yy() api for logsGrygorii Strashko1-6/+6
Use dev_yy() API instead of pr_yy() for log outputs. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07ethernet: ti: cpts: use ktime_get_real_ns helperIvan Khoronzhuk1-1/+1
Update on more short variant for getting real clock in ns. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-09net: ethernet: ti: cpts: add support for ext rftclk selectionGrygorii Strashko1-1/+78
Some CPTS instances, which can be found on KeyStone 2 1G Ethernet Switch Subsystems, can control an external multiplexer that selects one of up to 32 clocks as time sync reference (RFTCLK) clock. This feature can be configured through CPTS_RFTCLK_SEL register (offset: x08) in CPTS module and can be represented as multiplexer clock. Hence, introduce support for optional cpts-refclk-mux clock, which, once defined will allow to select required CPTS RFTCLK by using assigned-clock-parents DT property in board files. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-09net: ethernet: ti: cpts: use devm_get_clk_from_childGrygorii Strashko1-2/+7
Use devm_get_clk_from_child() instead of devm_clk_get() and this way allow to group CPTS DT properties in sub-node for better code readability and maintenance. Roll-back to devm_clk_get() if devm_get_clk_from_child() fails for backward compatibility. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: ethernet: ti: convert to SPDX license identifiersGrygorii Strashko1-13/+1
Replace textual license with SPDX-License-Identifier. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-27net: (cpts) fix a missing check of clk_prepareKangjie Lu1-1/+3
clk_prepare() could fail, so let's check its status, and if it fails, return its error code upstream. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-13net: ethernet: ti: cpts: move enable/disable flags outside of cpts moduleIvan Khoronzhuk1-2/+0
Each slave has it's own receive timestamp filter. But cpts rx/tx timestamp enable flags are used to allow ts retrieve only for one user. This limitation causes data path redundancy and setting overlap if cpsw module is in dual-mac mode for instance. If rx ts is enabled only for one port - the second interface must expect every incoming packet to be PTP packet w/o absolutely any reason, and if it's PTP - do unneeded stuff, as rx filter for second port is not set and cpts fifo is not supposed to contain appropriate ts event. That's not correct. So, to fix control overlap and avoid redundant CPU cycles, the patch splits rx/tx ts enable flags between network devices. After the patch, PTP timestamping still should be used for only one port (or PTP id counter has to be different for both ports as cpts IP is common). Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-13net: ethernet: ti: cpts: purge staled skbs from txqIvan Khoronzhuk1-2/+24
The overflow event is running with 1 jiffy in case if txq is not empty, but it can be emptied completely only if next tx event consumes skb or deletes staled skb from the txq. In case of staled skb, that can happen for some unpredictable reason (the ts event was lost or timed out), the overflow event can be generated quite long time consuming CPU w/o reason before next tx event happens. To avoid it, purge txq before increasing overflow event rate. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-13net: ethernet: ti: cpts: correct debug for expired txq skbIvan Khoronzhuk1-3/+1
The msgtype and seqid that is smth that belongs to event for comparison but not for staled txq skb. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07net: ethernet: ti: cpts: mark expected switch fall-throughGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 114813 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12net: ethernet: ti: cpts: break cycle once late ts is matchedIvan Khoronzhuk1-1/+4
The late ts queue can contain a bunch of skbs while hi rate testing, no need to check all of them if timestamp is already matched. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-21net: ethernet: ti: cpts: Fix timestamp printFlorian Fainelli1-1/+2
On 64-bit hosts we will get the following warning: drivers/net/ethernet/ti/cpts.c: In function 'cpts_overflow_check': drivers/net/ethernet/ti/cpts.c:297:11: warning: format '%lld' expects argument of type 'long long int', but argument 3 has type '__kernel_time_t {aka long int}' [-Wformat=] pr_debug("cpts overflow check at %lld.%09lu\n", ts.tv_sec, ts.tv_nsec); Fix this by using an appropriate casting that works on all bit sizes. Fixes: a5c79c26e168 ("ptp: cpts: convert to the 64 bit get/set time methods.") Fixes: 87c0e764d43a ("cpts: introduce time stamping code and a PTP hardware clock.") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14net: ethernet: ti: Use ERR_CAST instead of ERR_PTR(PTR_ERR())Hernán Gonzalez1-1/+1
Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)). drivers/net/ethernet/ti/cpts.c:567:9-16: WARNING: ERR_CAST can be used with cpts->refclk Generated by: scripts/coccinelle/api/err_cast.cocci Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net: ethernet: make ptp_clock_info constBhumika Goyal1-1/+1
Make these const as they are only used in a copy operation. Done using Coccinelle. @match disable optional_qualifier@ identifier s; @@ static struct ptp_clock_info s = {...}; @ref@ position p; identifier match.s; @@ s@p @good1@ position ref.p; identifier match.s,f,c; expression e; @@ ( e = s@p | e = s@p.f | c(...,s@p.f,...) | c(...,s@p,...) ) @bad depends on !good1@ position ref.p; identifier match.s; @@ s@p @depends on forall !bad disable optional_qualifier@ identifier match.s; @@ static + const struct ptp_clock_info s; Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01net: ethernet: ti: cpts: fix fifo read in cpts_find_tsGrygorii Strashko1-1/+1
Now the call chain cpts_find_ts() |- cpts_fifo_read(cpts, CPTS_EV_PUSH) will stop reading CPTS FIFO if PUSH event is found. But this is not expected and CPTS FIFI should be completely drained here. This is most probably copy-paste error and it has no negative impact as CPTS_EV_PUSH should not be present in FIFO without TS_PUSH request and cpts_systim_read() and cpts_find_ts() synchronized by spin_lock. Correct above by calling cpts_fifo_read() with -1 parameter, so it will read all CPTS event from FIFO. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01net: ethernet: ti: cpts: fix tx timestamping timeoutGrygorii Strashko1-2/+82
With the low speed Ethernet connection CPDMA notification about packet processing can be received before CPTS TX timestamp event, which is set when packet actually left CPSW while cpdma notification is sent when packet pushed in CPSW fifo. As result, when connection is slow and CPU is fast enough TX timestamping is not working properly. Fix it, by introducing TX SKB queue to store PTP SKBs for which Ethernet Transmit Event hasn't been received yet and then re-check this queue with new Ethernet Transmit Events by scheduling CPTS overflow work more often (every 1 jiffies) until TX SKB queue is not empty. Side effect of this change is: - User space tools require to take into account possible delay in TX timestamp processing (for example ptp4l works with tx_timestamp_timeout=400 under net traffic and tx_timestamp_timeout=25 in idle). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01net: ethernet: ti: cpts: convert to use ptp auxiliary workerGrygorii Strashko1-14/+13
There could be significant delay in CPTS work schedule under high system load and on -RT which could cause CPTS misbehavior due to internal counter overflow. Usage of own kthread_worker allows to avoid such kind of issues and makes it possible to tune priority of CPTS kthread_worker thread on -RT (thread name "cpts"). Hence, the CPTS driver is converted to use PTP auxiliary worker as PHC subsystem implements such functionality in a generic way now. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-25clocksource: Use a plain u64 instead of cycle_tThomas Gleixner1-1/+1
There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org>
2016-12-07net: ethernet: ti: cpts: fix overflow check periodGrygorii Strashko1-3/+7
The CPTS drivers uses 8sec period for overflow checking with assumption that CPTS retclk will not exceed 500MHz. But that's not true on some TI platforms (Kesytone 2). As result, it is possible that CPTS counter will overflow more than once between two readings. Hence, fix it by selecting overflow check period dynamically as max_sec_before_overflow/2, where max_sec_before_overflow = max_counter_val / rftclk_freq. Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07net: ethernet: ti: cpts: calc mult and shift from refclk freqGrygorii Strashko1-7/+43
The cyclecounter mult and shift values can be calculated based on the CPTS rfclk frequency and timekeepnig framework provides required algos and API's. Hence, calc mult and shift basing on CPTS rfclk frequency if both cpts_clock_shift and cpts_clock_mult properties are not provided in DT (the basis of calculation algorithm is borrowed from __clocksource_update_freq_scale() commit 7d2f944a2b83 ("clocksource: Provide a generic mult/shift factor calculation")). After this change cpts_clock_shift and cpts_clock_mult DT properties will become optional. Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07net: ethernet: ti: cpts: move dt props parsing to cpts driverGrygorii Strashko1-4/+30
Move DT properties parsing into CPTS driver to simplify CPSW code and CPTS driver porting on other SoC in the future (like Keystone 2) - with this change it will not be required to add the same DT parsing code in Keystone 2 NETCP driver. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07net: ethernet: ti: cpts: rework initialization/deinitializationGrygorii Strashko1-41/+58
The current implementation CPTS initialization and deinitialization (represented by cpts_register/unregister()) does too many static initialization from .ndo_open(), which is reasonable to do once at probe time instead, and also require caller to allocate memory for struct cpts, which is internal for CPTS driver in general. This patch splits CPTS initialization and deinitialization on two parts: - static initializtion cpts_create()/cpts_release() which expected to be executed when parent driver is probed/removed; - dynamic part cpts_register/unregister() which expected to be executed when network device is opened/closed. As result, current code of CPTS parent driver - CPSW - will be simplified (and it also will allow simplify adding support for Keystone 2 devices in the future), plus more initialization errors will be catched earlier. In addition, this change allows to clean up cpts.h for the case when CPTS is disabled. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07net: ethernet: ti: cpts: drop excessive writes to CTRL and INT_EN regsGrygorii Strashko1-2/+0
CPTS module and IRQs are always enabled when CPTS is registered, before starting overflow check work, and disabled during deregistration, when overflow check work has been canceled already. So, It doesn't require to (re)enable CPTS module and IRQs in cpts_overflow_check(). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07net: ethernet: ti: cpts: clean up event list if event pool is emptyWingMan Kwok1-2/+24
When a CPTS user does not exit gracefully by disabling cpts timestamping and leaving a joined multicast group, the system continues to receive and timestamps the ptp packets which eventually occupy all the event list entries. When this happns, the added code tries to remove some list entries which are expired. Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07net: ethernet: ti: cpts: disable cpts when unregisteredGrygorii Strashko1-0/+4
The cpts now is left enabled after unregistration. Hence, disable it in cpts_unregister(). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07net: ethernet: ti: cpts: fix registration orderGrygorii Strashko1-10/+14
The ptp clock registered before spinlock, which is protecting it, and before timecounter and cyclecounter initialization in cpts_register(). So, ensure that ptp clock is registered the last, after everything else is done. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07net: ethernet: ti: cpts: fix unbalanced clk api usage in ↵Grygorii Strashko1-6/+8
cpts_register/unregister There are two issues with TI CPTS code which are reproducible when TI CPSW ethX device passes few up/down iterations: - cpts refclk prepare counter continuously incremented after each up/down iteration; - devm_clk_get(dev, "cpts") is called many times. Hence, fix these issues by using clk_disable_unprepare() in cpts_clk_release() and skipping devm_clk_get() if cpts refclk has been acquired already. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07net: ethernet: ti: allow cpts to be built separatelyGrygorii Strashko1-8/+8
TI CPTS IP is used as part of TI OMAP CPSW driver, but it's also present as part of NETCP on TI Keystone 2 SoCs. So, It's required to enable build of CPTS for both this drivers and this can be achieved by allowing CPTS to be built separately. Hence, allow cpts to be built separately and convert it to be a module as both CPSW and NETCP drives can be built as modules. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07net: ethernet: ti: cpts: switch to readl/writel_relaxed()Grygorii Strashko1-2/+2
Switch to readl/writel_relaxed() APIs, because this is recommended API and the CPTS IP is reused on Keystone 2 SoCs where LE/BE modes are supported. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31ptp: cpts: use helpers for converting ns to timespec.Richard Cochran1-5/+2
This patch changes the driver to use ns_to_timespec64() and timespec64_to_ns() instead of open coding the same logic. Compile tested only. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31ptp: cpts: convert to the 64 bit get/set time methods.Richard Cochran1-6/+6
This driver's clock is implemented using a timecounter, and so with this patch the driver is ready for the year 2038. Compile tested only. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-30net: cpts: convert to timecounter adjtime.Richard Cochran1-4/+1
This patch changes the driver to use the new and improved method for adjusting the offset of a timecounter. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12net: ptp: fix time stamp matching logic for VLAN packets.Richard Cochran1-1/+1
Commit ae5c6c6d "ptp: Classify ptp over ip over vlan packets" changed the code in two drivers that matches time stamps with PTP frames, with the goal of allowing VLAN tagged PTP packets to receive hardware time stamps. However, that commit failed to account for the VLAN header when parsing IPv4 packets. This patch fixes those two drivers to correctly match VLAN tagged IPv4/UDP PTP messages with their time stamps. This patch should also be applied to v3.17. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07ptp: Classify ptp over ip over vlan packetsStefan Sørensen1-13/+11
This extends the ptp bpf to also match ptp over ip over vlan packets. The ptp classes are changed to orthogonal bitfields representing version, transport and vlan values to simplify matching. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05drivers: net: cpts: Remove hardcoded clock name for CPTSGeorge Cherian1-7/+4
CPTS refclk name is hardcoded, which makes it fail in case of DRA7x Remove the hardcoded clock name for CPTS refclk and get the same from DT. Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-03net: ti: fix CPTS driver build on armAlexei Starovoitov1-0/+2
fix build errors: drivers/net/ethernet/ti/cpts.c:266:12: error: 'ETH_HLEN' undeclared (first use in this function) drivers/net/ethernet/ti/cpts.c:276:23: error: 'VLAN_HLEN' undeclared (first use in this function) Fixes: 408eccce3204 ("net: ptp: move PTP classifier in its own file") Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Suggested-by: Daniel Borkmann <dborkman@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-31net: ptp: do not reimplement PTP/BPF classifierDaniel Borkmann1-9/+1
There are currently pch_gbe, cpts, and ixp4xx_eth drivers that open-code and reimplement a BPF classifier for the PTP protocol. Since all of them effectively do the very same thing and load the very same PTP/BPF filter, we can just consolidate that code by introducing ptp_classify_raw() in the time-stamping core framework which can be used in drivers. As drivers get initialized after bootstrapping the core networking subsystem, they can make use of ptp_insns wrapped through ptp_classify_raw(), which allows to simplify and remove PTP classifier setup code in drivers. Joint work with Alexei Starovoitov. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Richard Cochran <richard.cochran@omicron.at> Cc: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-21ptp: drivers: set the number of programmable pins.Richard Cochran1-0/+1
This patch updates the many PTP Hardware Clock drivers with the newly introduced field that advertises the number of programmable pins. Some of these devices do have programmable pins, but the implementation will have to wait for follow on patches. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20treewide: Fix typos in printkMasanari Iida1-1/+1
Correct spelling typo in various drivers. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-26cpts: fix a run time warn_on.Richard Cochran1-1/+1
This patch fixes a warning in clk_enable by calling clk_prepare_enable instead. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-26cpts: fix build error by removing useless code.Richard Cochran1-1/+0
The cpts driver tries to obtain the input clock frequency by calling the clock's internal 'recalc' method. Since <plat/clock.h> has been removed, this code can no longer compile. However, the driver never makes use of the frequency value, so this patch fixes the issue by removing the offending code altogether. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 00:28:02 +0000