diff options
Diffstat (limited to 'drivers/usb/host/xhci-rcar.c')
| -rw-r--r-- | drivers/usb/host/xhci-rcar.c | 40 |
1 files changed, 38 insertions, 2 deletions
diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c index 07278228214b..198bc188ab25 100644 --- a/drivers/usb/host/xhci-rcar.c +++ b/drivers/usb/host/xhci-rcar.c @@ -13,13 +13,15 @@ #include <linux/platform_device.h> #include <linux/of.h> #include <linux/usb/phy.h> +#include <linux/sys_soc.h> #include "xhci.h" #include "xhci-plat.h" #include "xhci-rcar.h" /* -* - The V3 firmware is for r8a7796 (with good performance). +* - The V3 firmware is for r8a7796 (with good performance) and r8a7795 es2.0 +* or later. * - The V2 firmware can be used on both r8a7795 (es1.x) and r8a7796. * - The V2 firmware is possible to use on R-Car Gen2. However, the V2 causes * performance degradation. So, this driver continues to use the V1 if R-Car @@ -67,6 +69,26 @@ MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V3); #define RCAR_USB3_RX_POL_VAL BIT(21) #define RCAR_USB3_TX_POL_VAL BIT(4) +/* For soc_device_attribute */ +#define RCAR_XHCI_FIRMWARE_V2 BIT(0) /* FIRMWARE V2 */ +#define RCAR_XHCI_FIRMWARE_V3 BIT(1) /* FIRMWARE V3 */ + +static const struct soc_device_attribute rcar_quirks_match[] = { + { + .soc_id = "r8a7795", .revision = "ES1.*", + .data = (void *)RCAR_XHCI_FIRMWARE_V2, + }, + { + .soc_id = "r8a7795", + .data = (void *)RCAR_XHCI_FIRMWARE_V3, + }, + { + .soc_id = "r8a7796", + .data = (void *)RCAR_XHCI_FIRMWARE_V3, + }, + { /* sentinel */ }, +}; + static void xhci_rcar_start_gen2(struct usb_hcd *hcd) { /* LCLK Select */ @@ -122,9 +144,23 @@ static int xhci_rcar_download_firmware(struct usb_hcd *hcd) int retval, index, j, time; int timeout = 10000; u32 data, val, temp; + u32 quirks = 0; + const struct soc_device_attribute *attr; + const char *firmware_name; + + attr = soc_device_match(rcar_quirks_match); + if (attr) + quirks = (uintptr_t)attr->data; + + if (quirks & RCAR_XHCI_FIRMWARE_V2) + firmware_name = XHCI_RCAR_FIRMWARE_NAME_V2; + else if (quirks & RCAR_XHCI_FIRMWARE_V3) + firmware_name = XHCI_RCAR_FIRMWARE_NAME_V3; + else + firmware_name = priv->firmware_name; /* request R-Car USB3.0 firmware */ - retval = request_firmware(&fw, priv->firmware_name, dev); + retval = request_firmware(&fw, firmware_name, dev); if (retval) return retval; |