diff options
Diffstat (limited to 'drivers/net/phy/marvell.c')
| -rw-r--r-- | drivers/net/phy/marvell.c | 484 |
1 files changed, 484 insertions, 0 deletions
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 7fc8e10c5f33..4ea226566cec 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -27,6 +27,7 @@ #include <linux/module.h> #include <linux/mii.h> #include <linux/ethtool.h> +#include <linux/ethtool_netlink.h> #include <linux/phy.h> #include <linux/marvell_phy.h> #include <linux/bitfield.h> @@ -41,7 +42,9 @@ #define MII_MARVELL_FIBER_PAGE 0x01 #define MII_MARVELL_MSCR_PAGE 0x02 #define MII_MARVELL_LED_PAGE 0x03 +#define MII_MARVELL_VCT5_PAGE 0x05 #define MII_MARVELL_MISC_TEST_PAGE 0x06 +#define MII_MARVELL_VCT7_PAGE 0x07 #define MII_MARVELL_WOL_PAGE 0x11 #define MII_M1011_IEVENT 0x13 @@ -162,6 +165,90 @@ #define MII_88E1510_GEN_CTRL_REG_1_MODE_SGMII 0x1 /* SGMII to copper */ #define MII_88E1510_GEN_CTRL_REG_1_RESET 0x8000 /* Soft reset */ +#define MII_VCT5_TX_RX_MDI0_COUPLING 0x10 +#define MII_VCT5_TX_RX_MDI1_COUPLING 0x11 +#define MII_VCT5_TX_RX_MDI2_COUPLING 0x12 +#define MII_VCT5_TX_RX_MDI3_COUPLING 0x13 +#define MII_VCT5_TX_RX_AMPLITUDE_MASK 0x7f00 +#define MII_VCT5_TX_RX_AMPLITUDE_SHIFT 8 +#define MII_VCT5_TX_RX_COUPLING_POSITIVE_REFLECTION BIT(15) + +#define MII_VCT5_CTRL 0x17 +#define MII_VCT5_CTRL_ENABLE BIT(15) +#define MII_VCT5_CTRL_COMPLETE BIT(14) +#define MII_VCT5_CTRL_TX_SAME_CHANNEL (0x0 << 11) +#define MII_VCT5_CTRL_TX0_CHANNEL (0x4 << 11) +#define MII_VCT5_CTRL_TX1_CHANNEL (0x5 << 11) +#define MII_VCT5_CTRL_TX2_CHANNEL (0x6 << 11) +#define MII_VCT5_CTRL_TX3_CHANNEL (0x7 << 11) +#define MII_VCT5_CTRL_SAMPLES_2 (0x0 << 8) +#define MII_VCT5_CTRL_SAMPLES_4 (0x1 << 8) +#define MII_VCT5_CTRL_SAMPLES_8 (0x2 << 8) +#define MII_VCT5_CTRL_SAMPLES_16 (0x3 << 8) +#define MII_VCT5_CTRL_SAMPLES_32 (0x4 << 8) +#define MII_VCT5_CTRL_SAMPLES_64 (0x5 << 8) +#define MII_VCT5_CTRL_SAMPLES_128 (0x6 << 8) +#define MII_VCT5_CTRL_SAMPLES_DEFAULT (0x6 << 8) +#define MII_VCT5_CTRL_SAMPLES_256 (0x7 << 8) +#define MII_VCT5_CTRL_SAMPLES_SHIFT 8 +#define MII_VCT5_CTRL_MODE_MAXIMUM_PEEK (0x0 << 6) +#define MII_VCT5_CTRL_MODE_FIRST_LAST_PEEK (0x1 << 6) +#define MII_VCT5_CTRL_MODE_OFFSET (0x2 << 6) +#define MII_VCT5_CTRL_SAMPLE_POINT (0x3 << 6) +#define MII_VCT5_CTRL_PEEK_HYST_DEFAULT 3 + +#define MII_VCT5_SAMPLE_POINT_DISTANCE 0x18 +#define MII_VCT5_SAMPLE_POINT_DISTANCE_MAX 511 +#define MII_VCT5_TX_PULSE_CTRL 0x1c +#define MII_VCT5_TX_PULSE_CTRL_DONT_WAIT_LINK_DOWN BIT(12) +#define MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_128nS (0x0 << 10) +#define MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_96nS (0x1 << 10) +#define MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_64nS (0x2 << 10) +#define MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_32nS (0x3 << 10) +#define MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_SHIFT 10 +#define MII_VCT5_TX_PULSE_CTRL_PULSE_AMPLITUDE_1000mV (0x0 << 8) +#define MII_VCT5_TX_PULSE_CTRL_PULSE_AMPLITUDE_750mV (0x1 << 8) +#define MII_VCT5_TX_PULSE_CTRL_PULSE_AMPLITUDE_500mV (0x2 << 8) +#define MII_VCT5_TX_PULSE_CTRL_PULSE_AMPLITUDE_250mV (0x3 << 8) +#define MII_VCT5_TX_PULSE_CTRL_PULSE_AMPLITUDE_SHIFT 8 +#define MII_VCT5_TX_PULSE_CTRL_MAX_AMP BIT(7) +#define MII_VCT5_TX_PULSE_CTRL_GT_140m_46_86mV (0x6 << 0) + +/* For TDR measurements less than 11 meters, a short pulse should be + * used. + */ +#define TDR_SHORT_CABLE_LENGTH 11 + +#define MII_VCT7_PAIR_0_DISTANCE 0x10 +#define MII_VCT7_PAIR_1_DISTANCE 0x11 +#define MII_VCT7_PAIR_2_DISTANCE 0x12 +#define MII_VCT7_PAIR_3_DISTANCE 0x13 + +#define MII_VCT7_RESULTS 0x14 +#define MII_VCT7_RESULTS_PAIR3_MASK 0xf000 +#define MII_VCT7_RESULTS_PAIR2_MASK 0x0f00 +#define MII_VCT7_RESULTS_PAIR1_MASK 0x00f0 +#define MII_VCT7_RESULTS_PAIR0_MASK 0x000f +#define MII_VCT7_RESULTS_PAIR3_SHIFT 12 +#define MII_VCT7_RESULTS_PAIR2_SHIFT 8 +#define MII_VCT7_RESULTS_PAIR1_SHIFT 4 +#define MII_VCT7_RESULTS_PAIR0_SHIFT 0 +#define MII_VCT7_RESULTS_INVALID 0 +#define MII_VCT7_RESULTS_OK 1 +#define MII_VCT7_RESULTS_OPEN 2 +#define MII_VCT7_RESULTS_SAME_SHORT 3 +#define MII_VCT7_RESULTS_CROSS_SHORT 4 +#define MII_VCT7_RESULTS_BUSY 9 + +#define MII_VCT7_CTRL 0x15 +#define MII_VCT7_CTRL_RUN_NOW BIT(15) +#define MII_VCT7_CTRL_RUN_ANEG BIT(14) +#define MII_VCT7_CTRL_DISABLE_CROSS BIT(13) +#define MII_VCT7_CTRL_RUN_AFTER_BREAK_LINK BIT(12) +#define MII_VCT7_CTRL_IN_PROGRESS BIT(11) +#define MII_VCT7_CTRL_METERS BIT(10) +#define MII_VCT7_CTRL_CENTIMETERS 0 + #define LPA_PAUSE_FIBER 0x180 #define LPA_PAUSE_ASYM_FIBER 0x100 @@ -188,6 +275,11 @@ struct marvell_priv { u64 stats[ARRAY_SIZE(marvell_hw_stats)]; char *hwmon_name; struct device *hwmon_dev; + bool cable_test_tdr; + u32 first; + u32 last; + u32 step; + s8 pair; }; static int marvell_read_page(struct phy_device *phydev) @@ -1658,6 +1750,382 @@ static void marvell_get_stats(struct phy_device *phydev, data[i] = marvell_get_stat(phydev, i); } +static int marvell_vct5_wait_complete(struct phy_device *phydev) +{ + int i; + int val; + + for (i = 0; i < 32; i++) { + val = __phy_read(phydev, MII_VCT5_CTRL); + if (val < 0) + return val; + + if (val & MII_VCT5_CTRL_COMPLETE) + return 0; + } + + phydev_err(phydev, "Timeout while waiting for cable test to finish\n"); + return -ETIMEDOUT; +} + +static int marvell_vct5_amplitude(struct phy_device *phydev, int pair) +{ + int amplitude; + int val; + int reg; + + reg = MII_VCT5_TX_RX_MDI0_COUPLING + pair; + val = __phy_read(phydev, reg); + + if (val < 0) + return 0; + + amplitude = (val & MII_VCT5_TX_RX_AMPLITUDE_MASK) >> + MII_VCT5_TX_RX_AMPLITUDE_SHIFT; + + if (!(val & MII_VCT5_TX_RX_COUPLING_POSITIVE_REFLECTION)) + amplitude = -amplitude; + + return 1000 * amplitude / 128; +} + +static u32 marvell_vct5_distance2cm(int distance) +{ + return distance * 805 / 10; +} + +static u32 marvell_vct5_cm2distance(int cm) +{ + return cm * 10 / 805; +} + +static int marvell_vct5_amplitude_distance(struct phy_device *phydev, + int distance, int pair) +{ + u16 reg; + int err; + int mV; + int i; + + err = __phy_write(phydev, MII_VCT5_SAMPLE_POINT_DISTANCE, + distance); + if (err) + return err; + + reg = MII_VCT5_CTRL_ENABLE | + MII_VCT5_CTRL_TX_SAME_CHANNEL | + MII_VCT5_CTRL_SAMPLES_DEFAULT | + MII_VCT5_CTRL_SAMPLE_POINT | + MII_VCT5_CTRL_PEEK_HYST_DEFAULT; + err = __phy_write(phydev, MII_VCT5_CTRL, reg); + if (err) + return err; + + err = marvell_vct5_wait_complete(phydev); + if (err) + return err; + + for (i = 0; i < 4; i++) { + if (pair != PHY_PAIR_ALL && i != pair) + continue; + + mV = marvell_vct5_amplitude(phydev, i); + ethnl_cable_test_amplitude(phydev, i, mV); + } + + return 0; +} + +static int marvell_vct5_amplitude_graph(struct phy_device *phydev) +{ + struct marvell_priv *priv = phydev->priv; + int distance; + u16 width; + int page; + int err; + u16 reg; + + if (priv->first <= TDR_SHORT_CABLE_LENGTH) + width = MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_32nS; + else + width = MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_128nS; + + reg = MII_VCT5_TX_PULSE_CTRL_GT_140m_46_86mV | + MII_VCT5_TX_PULSE_CTRL_DONT_WAIT_LINK_DOWN | + MII_VCT5_TX_PULSE_CTRL_MAX_AMP | width; + + err = phy_write_paged(phydev, MII_MARVELL_VCT5_PAGE, + MII_VCT5_TX_PULSE_CTRL, reg); + if (err) + return err; + + /* Reading the TDR data is very MDIO heavy. We need to optimize + * access to keep the time to a minimum. So lock the bus once, + * and don't release it until complete. We can then avoid having + * to change the page for every access, greatly speeding things + * up. + */ + page = phy_select_page(phydev, MII_MARVELL_VCT5_PAGE); + if (page < 0) + goto restore_page; + + for (distance = priv->first; + distance <= priv->last; + distance += priv->step) { + err = marvell_vct5_amplitude_distance(phydev, distance, + priv->pair); + if (err) + goto restore_page; + + if (distance > TDR_SHORT_CABLE_LENGTH && + width == MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_32nS) { + width = MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_128nS; + reg = MII_VCT5_TX_PULSE_CTRL_GT_140m_46_86mV | + MII_VCT5_TX_PULSE_CTRL_DONT_WAIT_LINK_DOWN | + MII_VCT5_TX_PULSE_CTRL_MAX_AMP | width; + err = __phy_write(phydev, MII_VCT5_TX_PULSE_CTRL, reg); + if (err) + goto restore_page; + } + } + +restore_page: + return phy_restore_page(phydev, page, err); +} + +static int marvell_cable_test_start_common(struct phy_device *phydev) +{ + int bmcr, bmsr, ret; + + /* If auto-negotiation is enabled, but not complete, the cable + * test never completes. So disable auto-neg. + */ + bmcr = phy_read(phydev, MII_BMCR); + if (bmcr < 0) + return bmcr; + + bmsr = phy_read(phydev, MII_BMSR); + + if (bmsr < 0) + return bmsr; + + if (bmcr & BMCR_ANENABLE) { + ret = phy_modify(phydev, MII_BMCR, BMCR_ANENABLE, 0); + if (ret < 0) + return ret; + ret = genphy_soft_reset(phydev); + if (ret < 0) + return ret; + } + + /* If the link is up, allow it some time to go down */ + if (bmsr & BMSR_LSTATUS) + msleep(1500); + + return 0; +} + +static int marvell_vct7_cable_test_start(struct phy_device *phydev) +{ + struct marvell_priv *priv = phydev->priv; + int ret; + + ret = marvell_cable_test_start_common(phydev); + if (ret) + return ret; + + priv->cable_test_tdr = false; + + /* Reset the VCT5 API control to defaults, otherwise + * VCT7 does not work correctly. + */ + ret = phy_write_paged(phydev, MII_MARVELL_VCT5_PAGE, + MII_VCT5_CTRL, + MII_VCT5_CTRL_TX_SAME_CHANNEL | + MII_VCT5_CTRL_SAMPLES_DEFAULT | + MII_VCT5_CTRL_MODE_MAXIMUM_PEEK | + MII_VCT5_CTRL_PEEK_HYST_DEFAULT); + if (ret) + return ret; + + ret = phy_write_paged(phydev, MII_MARVELL_VCT5_PAGE, + MII_VCT5_SAMPLE_POINT_DISTANCE, 0); + if (ret) + return ret; + + return phy_write_paged(phydev, MII_MARVELL_VCT7_PAGE, + MII_VCT7_CTRL, + MII_VCT7_CTRL_RUN_NOW | + MII_VCT7_CTRL_CENTIMETERS); +} + +static int marvell_vct5_cable_test_tdr_start(struct phy_device *phydev, + const struct phy_tdr_config *cfg) +{ + struct marvell_priv *priv = phydev->priv; + int ret; + + priv->cable_test_tdr = true; + priv->first = marvell_vct5_cm2distance(cfg->first); + priv->last = marvell_vct5_cm2distance(cfg->last); + priv->step = marvell_vct5_cm2distance(cfg->step); + priv->pair = cfg->pair; + + if (priv->first > MII_VCT5_SAMPLE_POINT_DISTANCE_MAX) + return -EINVAL; + + if (priv->last > MII_VCT5_SAMPLE_POINT_DISTANCE_MAX) + return -EINVAL; + + /* Disable VCT7 */ + ret = phy_write_paged(phydev, MII_MARVELL_VCT7_PAGE, + MII_VCT7_CTRL, 0); + if (ret) + return ret; + + ret = marvell_cable_test_start_common(phydev); + if (ret) + return ret; + + ret = ethnl_cable_test_pulse(phydev, 1000); + if (ret) + return ret; + + return ethnl_cable_test_step(phydev, + marvell_vct5_distance2cm(priv->first), + marvell_vct5_distance2cm(priv->last), + marvell_vct5_distance2cm(priv->step)); +} + +static int marvell_vct7_distance_to_length(int distance, bool meter) +{ + if (meter) + distance *= 100; + + return distance; +} + +static bool marvell_vct7_distance_valid(int result) +{ + switch (result) { + case MII_VCT7_RESULTS_OPEN: + case MII_VCT7_RESULTS_SAME_SHORT: + case MII_VCT7_RESULTS_CROSS_SHORT: + return true; + } + return false; +} + +static int marvell_vct7_report_length(struct phy_device *phydev, + int pair, bool meter) +{ + int length; + int ret; + + ret = phy_read_paged(phydev, MII_MARVELL_VCT7_PAGE, + MII_VCT7_PAIR_0_DISTANCE + pair); + if (ret < 0) + return ret; + + length = marvell_vct7_distance_to_length(ret, meter); + + ethnl_cable_test_fault_length(phydev, pair, length); + + return 0; +} + +static int marvell_vct7_cable_test_report_trans(int result) +{ + switch (result) { + case MII_VCT7_RESULTS_OK: + return ETHTOOL_A_CABLE_RESULT_CODE_OK; + case MII_VCT7_RESULTS_OPEN: + return ETHTOOL_A_CABLE_RESULT_CODE_OPEN; + case MII_VCT7_RESULTS_SAME_SHORT: + return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT; + case MII_VCT7_RESULTS_CROSS_SHORT: + return ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT; + default: + return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC; + } +} + +static int marvell_vct7_cable_test_report(struct phy_device *phydev) +{ + int pair0, pair1, pair2, pair3; + bool meter; + int ret; + + ret = phy_read_paged(phydev, MII_MARVELL_VCT7_PAGE, + MII_VCT7_RESULTS); + if (ret < 0) + return ret; + + pair3 = (ret & MII_VCT7_RESULTS_PAIR3_MASK) >> + MII_VCT7_RESULTS_PAIR3_SHIFT; + pair2 = (ret & MII_VCT7_RESULTS_PAIR2_MASK) >> + MII_VCT7_RESULTS_PAIR2_SHIFT; + pair1 = (ret & MII_VCT7_RESULTS_PAIR1_MASK) >> + MII_VCT7_RESULTS_PAIR1_SHIFT; + pair0 = (ret & MII_VCT7_RESULTS_PAIR0_MASK) >> + MII_VCT7_RESULTS_PAIR0_SHIFT; + + ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A, + marvell_vct7_cable_test_report_trans(pair0)); + ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_B, + marvell_vct7_cable_test_report_trans(pair1)); + ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_C, + marvell_vct7_cable_test_report_trans(pair2)); + ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_D, + marvell_vct7_cable_test_report_trans(pair3)); + + ret = phy_read_paged(phydev, MII_MARVELL_VCT7_PAGE, MII_VCT7_CTRL); + if (ret < 0) + return ret; + + meter = ret & MII_VCT7_CTRL_METERS; + + if (marvell_vct7_distance_valid(pair0)) + marvell_vct7_report_length(phydev, 0, meter); + if (marvell_vct7_distance_valid(pair1)) + marvell_vct7_report_length(phydev, 1, meter); + if (marvell_vct7_distance_valid(pair2)) + marvell_vct7_report_length(phydev, 2, meter); + if (marvell_vct7_distance_valid(pair3)) + marvell_vct7_report_length(phydev, 3, meter); + + return 0; +} + +static int marvell_vct7_cable_test_get_status(struct phy_device *phydev, + bool *finished) +{ + struct marvell_priv *priv = phydev->priv; + int ret; + + if (priv->cable_test_tdr) { + ret = marvell_vct5_amplitude_graph(phydev); + *finished = true; + return ret; + } + + *finished = false; + + ret = phy_read_paged(phydev, MII_MARVELL_VCT7_PAGE, + MII_VCT7_CTRL); + + if (ret < 0) + return ret; + + if (!(ret & MII_VCT7_CTRL_IN_PROGRESS)) { + *finished = true; + + return marvell_vct7_cable_test_report(phydev); + } + + return 0; +} + #ifdef CONFIG_HWMON static int m88e1121_get_temp(struct phy_device *phydev, long *temp) { @@ -2353,6 +2821,7 @@ static struct phy_driver marvell_drivers[] = { .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1510", .features = PHY_GBIT_FIBRE_FEATURES, + .flags = PHY_POLL_CABLE_TEST, .probe = &m88e1510_probe, .config_init = &m88e1510_config_init, .config_aneg = &m88e1510_config_aneg, @@ -2372,12 +2841,16 @@ static struct phy_driver marvell_drivers[] = { .set_loopback = genphy_loopback, .get_tunable = m88e1011_get_tunable, .set_tunable = m88e1011_set_tunable, + .cable_test_start = marvell_vct7_cable_test_start, + .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start, + .cable_test_get_status = marvell_vct7_cable_test_get_status, }, { .phy_id = MARVELL_PHY_ID_88E1540, .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1540", /* PHY_GBIT_FEATURES */ + .flags = PHY_POLL_CABLE_TEST, .probe = m88e1510_probe, .config_init = &marvell_config_init, .config_aneg = &m88e1510_config_aneg, @@ -2394,6 +2867,9 @@ static struct phy_driver marvell_drivers[] = { .get_stats = marvell_get_stats, .get_tunable = m88e1540_get_tunable, .set_tunable = m88e1540_set_tunable, + .cable_test_start = marvell_vct7_cable_test_start, + .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start, + .cable_test_get_status = marvell_vct7_cable_test_get_status, }, { .phy_id = MARVELL_PHY_ID_88E1545, @@ -2401,6 +2877,7 @@ static struct phy_driver marvell_drivers[] = { .name = "Marvell 88E1545", .probe = m88e1510_probe, /* PHY_GBIT_FEATURES */ + .flags = PHY_POLL_CABLE_TEST, .config_init = &marvell_config_init, .config_aneg = &m88e1510_config_aneg, .read_status = &marvell_read_status, @@ -2416,6 +2893,9 @@ static struct phy_driver marvell_drivers[] = { .get_stats = marvell_get_stats, .get_tunable = m88e1540_get_tunable, .set_tunable = m88e1540_set_tunable, + .cable_test_start = marvell_vct7_cable_test_start, + .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start, + .cable_test_get_status = marvell_vct7_cable_test_get_status, }, { .phy_id = MARVELL_PHY_ID_88E3016, @@ -2442,6 +2922,7 @@ static struct phy_driver marvell_drivers[] = { .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E6390", /* PHY_GBIT_FEATURES */ + .flags = PHY_POLL_CABLE_TEST, .probe = m88e6390_probe, .config_init = &marvell_config_init, .config_aneg = &m88e6390_config_aneg, @@ -2458,6 +2939,9 @@ static struct phy_driver marvell_drivers[] = { .get_stats = marvell_get_stats, .get_tunable = m88e1540_get_tunable, .set_tunable = m88e1540_set_tunable, + .cable_test_start = marvell_vct7_cable_test_start, + .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start, + .cable_test_get_status = marvell_vct7_cable_test_get_status, }, }; |