diff options
Diffstat (limited to 'drivers/net/ethernet/intel')
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c | 65 |
1 files changed, 63 insertions, 2 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c index 2b238caec826..315f0597fbc0 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c @@ -1952,11 +1952,14 @@ s32 ixgbe_write_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset, * @hw: pointer to hardware structure * * Sets I2C start condition (High -> Low on SDA while SCL is High) + * Set bit-bang mode on X550 hardware. **/ static void ixgbe_i2c_start(struct ixgbe_hw *hw) { u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); + i2cctl |= IXGBE_I2C_BB_EN(hw); + /* Start condition must begin with data and clock high */ ixgbe_set_i2c_data(hw, &i2cctl, 1); ixgbe_raise_i2c_clk(hw, &i2cctl); @@ -1981,10 +1984,15 @@ static void ixgbe_i2c_start(struct ixgbe_hw *hw) * @hw: pointer to hardware structure * * Sets I2C stop condition (Low -> High on SDA while SCL is High) + * Disables bit-bang mode and negates data output enable on X550 + * hardware. **/ static void ixgbe_i2c_stop(struct ixgbe_hw *hw) { u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); + u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN(hw); + u32 clk_oe_bit = IXGBE_I2C_CLK_OE_N_EN(hw); + u32 bb_en_bit = IXGBE_I2C_BB_EN(hw); /* Stop condition must begin with data low and clock high */ ixgbe_set_i2c_data(hw, &i2cctl, 0); @@ -1997,6 +2005,13 @@ static void ixgbe_i2c_stop(struct ixgbe_hw *hw) /* bus free time between stop and start (4.7us)*/ udelay(IXGBE_I2C_T_BUF); + + if (bb_en_bit || data_oe_bit || clk_oe_bit) { + i2cctl &= ~bb_en_bit; + i2cctl |= data_oe_bit | clk_oe_bit; + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), i2cctl); + IXGBE_WRITE_FLUSH(hw); + } } /** @@ -2044,6 +2059,7 @@ static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data) /* Release SDA line (set high) */ i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); i2cctl |= IXGBE_I2C_DATA_OUT(hw); + i2cctl |= IXGBE_I2C_DATA_OE_N_EN(hw); IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), i2cctl); IXGBE_WRITE_FLUSH(hw); @@ -2058,15 +2074,21 @@ static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data) **/ static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw) { + u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN(hw); s32 status = 0; u32 i = 0; u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); u32 timeout = 10; bool ack = true; + if (data_oe_bit) { + i2cctl |= IXGBE_I2C_DATA_OUT(hw); + i2cctl |= data_oe_bit; + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), i2cctl); + IXGBE_WRITE_FLUSH(hw); + } ixgbe_raise_i2c_clk(hw, &i2cctl); - /* Minimum high period of clock is 4us */ udelay(IXGBE_I2C_T_HIGH); @@ -2104,7 +2126,14 @@ static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw) static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data) { u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); + u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN(hw); + if (data_oe_bit) { + i2cctl |= IXGBE_I2C_DATA_OUT(hw); + i2cctl |= data_oe_bit; + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), i2cctl); + IXGBE_WRITE_FLUSH(hw); + } ixgbe_raise_i2c_clk(hw, &i2cctl); /* Minimum high period of clock is 4us */ @@ -2159,13 +2188,20 @@ static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data) * @i2cctl: Current value of I2CCTL register * * Raises the I2C clock line '0'->'1' + * Negates the I2C clock output enable on X550 hardware. **/ static void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) { + u32 clk_oe_bit = IXGBE_I2C_CLK_OE_N_EN(hw); u32 i = 0; u32 timeout = IXGBE_I2C_CLOCK_STRETCHING_TIMEOUT; u32 i2cctl_r = 0; + if (clk_oe_bit) { + *i2cctl |= clk_oe_bit; + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), *i2cctl); + } + for (i = 0; i < timeout; i++) { *i2cctl |= IXGBE_I2C_CLK_OUT(hw); IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), *i2cctl); @@ -2185,11 +2221,13 @@ static void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) * @i2cctl: Current value of I2CCTL register * * Lowers the I2C clock line '1'->'0' + * Asserts the I2C clock output enable on X550 hardware. **/ static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) { *i2cctl &= ~IXGBE_I2C_CLK_OUT(hw); + *i2cctl &= ~IXGBE_I2C_CLK_OE_N_EN(hw); IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), *i2cctl); IXGBE_WRITE_FLUSH(hw); @@ -2205,13 +2243,17 @@ static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) * @data: I2C data value (0 or 1) to set * * Sets the I2C data bit + * Asserts the I2C data output enable on X550 hardware. **/ static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data) { + u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN(hw); + if (data) *i2cctl |= IXGBE_I2C_DATA_OUT(hw); else *i2cctl &= ~IXGBE_I2C_DATA_OUT(hw); + *i2cctl &= ~data_oe_bit; IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), *i2cctl); IXGBE_WRITE_FLUSH(hw); @@ -2219,6 +2261,14 @@ static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data) /* Data rise/fall (1000ns/300ns) and set-up time (250ns) */ udelay(IXGBE_I2C_T_RISE + IXGBE_I2C_T_FALL + IXGBE_I2C_T_SU_DATA); + if (!data) /* Can't verify data in this case */ + return 0; + if (data_oe_bit) { + *i2cctl |= data_oe_bit; + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), *i2cctl); + IXGBE_WRITE_FLUSH(hw); + } + /* Verify data was set correctly */ *i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); if (data != ixgbe_get_i2c_data(hw, i2cctl)) { @@ -2235,9 +2285,19 @@ static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data) * @i2cctl: Current value of I2CCTL register * * Returns the I2C data bit value + * Negates the I2C data output enable on X550 hardware. **/ static bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl) { + u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN(hw); + + if (data_oe_bit) { + *i2cctl |= data_oe_bit; + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), *i2cctl); + IXGBE_WRITE_FLUSH(hw); + udelay(IXGBE_I2C_T_FALL); + } + if (*i2cctl & IXGBE_I2C_DATA_IN(hw)) return true; return false; @@ -2252,10 +2312,11 @@ static bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl) **/ static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw) { - u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); + u32 i2cctl; u32 i; ixgbe_i2c_start(hw); + i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); ixgbe_set_i2c_data(hw, &i2cctl, 1); |