diff options
Diffstat (limited to 'drivers/clk/tegra/clk.h')
| -rw-r--r-- | drivers/clk/tegra/clk.h | 502 |
1 files changed, 502 insertions, 0 deletions
diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h new file mode 100644 index 000000000000..0744731c6229 --- /dev/null +++ b/drivers/clk/tegra/clk.h @@ -0,0 +1,502 @@ +/* + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __TEGRA_CLK_H +#define __TEGRA_CLK_H + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> + +/** + * struct tegra_clk_sync_source - external clock source from codec + * + * @hw: handle between common and hardware-specific interfaces + * @rate: input frequency from source + * @max_rate: max rate allowed + */ +struct tegra_clk_sync_source { + struct clk_hw hw; + unsigned long rate; + unsigned long max_rate; +}; + +#define to_clk_sync_source(_hw) \ + container_of(_hw, struct tegra_clk_sync_source, hw) + +extern const struct clk_ops tegra_clk_sync_source_ops; +struct clk *tegra_clk_register_sync_source(const char *name, + unsigned long fixed_rate, unsigned long max_rate); + +/** + * struct tegra_clk_frac_div - fractional divider clock + * + * @hw: handle between common and hardware-specific interfaces + * @reg: register containing divider + * @flags: hardware-specific flags + * @shift: shift to the divider bit field + * @width: width of the divider bit field + * @frac_width: width of the fractional bit field + * @lock: register lock + * + * Flags: + * TEGRA_DIVIDER_ROUND_UP - This flags indicates to round up the divider value. + * TEGRA_DIVIDER_FIXED - Fixed rate PLL dividers has addition override bit, this + * flag indicates that this divider is for fixed rate PLL. + * TEGRA_DIVIDER_INT - Some modules can not cope with the duty cycle when + * fraction bit is set. This flags indicates to calculate divider for which + * fracton bit will be zero. + * TEGRA_DIVIDER_UART - UART module divider has additional enable bit which is + * set when divider value is not 0. This flags indicates that the divider + * is for UART module. + */ +struct tegra_clk_frac_div { + struct clk_hw hw; + void __iomem *reg; + u8 flags; + u8 shift; + u8 width; + u8 frac_width; + spinlock_t *lock; +}; + +#define to_clk_frac_div(_hw) container_of(_hw, struct tegra_clk_frac_div, hw) + +#define TEGRA_DIVIDER_ROUND_UP BIT(0) +#define TEGRA_DIVIDER_FIXED BIT(1) +#define TEGRA_DIVIDER_INT BIT(2) +#define TEGRA_DIVIDER_UART BIT(3) + +extern const struct clk_ops tegra_clk_frac_div_ops; +struct clk *tegra_clk_register_divider(const char *name, + const char *parent_name, void __iomem *reg, + unsigned long flags, u8 clk_divider_flags, u8 shift, u8 width, + u8 frac_width, spinlock_t *lock); + +/* + * Tegra PLL: + * + * In general, there are 3 requirements for each PLL + * that SW needs to be comply with. + * (1) Input frequency range (REF). + * (2) Comparison frequency range (CF). CF = REF/DIVM. + * (3) VCO frequency range (VCO). VCO = CF * DIVN. + * + * The final PLL output frequency (FO) = VCO >> DIVP. + */ + +/** + * struct tegra_clk_pll_freq_table - PLL frequecy table + * + * @input_rate: input rate from source + * @output_rate: output rate from PLL for the input rate + * @n: feedback divider + * @m: input divider + * @p: post divider + * @cpcon: charge pump current + */ +struct tegra_clk_pll_freq_table { + unsigned long input_rate; + unsigned long output_rate; + u16 n; + u16 m; + u8 p; + u8 cpcon; +}; + +/** + * struct clk_pll_params - PLL parameters + * + * @input_min: Minimum input frequency + * @input_max: Maximum input frequency + * @cf_min: Minimum comparison frequency + * @cf_max: Maximum comparison frequency + * @vco_min: Minimum VCO frequency + * @vco_max: Maximum VCO frequency + * @base_reg: PLL base reg offset + * @misc_reg: PLL misc reg offset + * @lock_reg: PLL lock reg offset + * @lock_bit_idx: Bit index for PLL lock status + * @lock_enable_bit_idx: Bit index to enable PLL lock + * @lock_delay: Delay in us if PLL lock is not used + */ +struct tegra_clk_pll_params { + unsigned long input_min; + unsigned long input_max; + unsigned long cf_min; + unsigned long cf_max; + unsigned long vco_min; + unsigned long vco_max; + + u32 base_reg; + u32 misc_reg; + u32 lock_reg; + u32 lock_bit_idx; + u32 lock_enable_bit_idx; + int lock_delay; +}; + +/** + * struct tegra_clk_pll - Tegra PLL clock + * + * @hw: handle between common and hardware-specifix interfaces + * @clk_base: address of CAR controller + * @pmc: address of PMC, required to read override bits + * @freq_table: array of frequencies supported by PLL + * @params: PLL parameters + * @flags: PLL flags + * @fixed_rate: PLL rate if it is fixed + * @lock: register lock + * @divn_shift: shift to the feedback divider bit field + * @divn_width: width of the feedback divider bit field + * @divm_shift: shift to the input divider bit field + * @divm_width: width of the input divider bit field + * @divp_shift: shift to the post divider bit field + * @divp_width: width of the post divider bit field + * + * Flags: + * TEGRA_PLL_USE_LOCK - This flag indicated to use lock bits for + * PLL locking. If not set it will use lock_delay value to wait. + * TEGRA_PLL_HAS_CPCON - This flag indicates that CPCON value needs + * to be programmed to change output frequency of the PLL. + * TEGRA_PLL_SET_LFCON - This flag indicates that LFCON value needs + * to be programmed to change output frequency of the PLL. + * TEGRA_PLL_SET_DCCON - This flag indicates that DCCON value needs + * to be programmed to change output frequency of the PLL. + * TEGRA_PLLU - PLLU has inverted post divider. This flags indicated + * that it is PLLU and invert post divider value. + * TEGRA_PLLM - PLLM has additional override settings in PMC. This + * flag indicates that it is PLLM and use override settings. + * TEGRA_PLL_FIXED - We are not supposed to change output frequency + * of some plls. + * TEGRA_PLLE_CONFIGURE - Configure PLLE when enabling. + */ +struct tegra_clk_pll { + struct clk_hw hw; + void __iomem *clk_base; + void __iomem *pmc; + u8 flags; + unsigned long fixed_rate; + spinlock_t *lock; + u8 divn_shift; + u8 divn_width; + u8 divm_shift; + u8 divm_width; + u8 divp_shift; + u8 divp_width; + struct tegra_clk_pll_freq_table *freq_table; + struct tegra_clk_pll_params *params; +}; + +#define to_clk_pll(_hw) container_of(_hw, struct tegra_clk_pll, hw) + +#define TEGRA_PLL_USE_LOCK BIT(0) +#define TEGRA_PLL_HAS_CPCON BIT(1) +#define TEGRA_PLL_SET_LFCON BIT(2) +#define TEGRA_PLL_SET_DCCON BIT(3) +#define TEGRA_PLLU BIT(4) +#define TEGRA_PLLM BIT(5) +#define TEGRA_PLL_FIXED BIT(6) +#define TEGRA_PLLE_CONFIGURE BIT(7) + +extern const struct clk_ops tegra_clk_pll_ops; +extern const struct clk_ops tegra_clk_plle_ops; +struct clk *tegra_clk_register_pll(const char *name, const char *parent_name, + void __iomem *clk_base, void __iomem *pmc, + unsigned long flags, unsigned long fixed_rate, + struct tegra_clk_pll_params *pll_params, u8 pll_flags, + struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock); +struct clk *tegra_clk_register_plle(const char *name, const char *parent_name, + void __iomem *clk_base, void __iomem *pmc, + unsigned long flags, unsigned long fixed_rate, + struct tegra_clk_pll_params *pll_params, u8 pll_flags, + struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock); + +/** + * struct tegra_clk_pll_out - PLL divider down clock + * + * @hw: handle between common and hardware-specific interfaces + * @reg: register containing the PLL divider + * @enb_bit_idx: bit to enable/disable PLL divider + * @rst_bit_idx: bit to reset PLL divider + * @lock: register lock + * @flags: hardware-specific flags + */ +struct tegra_clk_pll_out { + struct clk_hw hw; + void __iomem *reg; + u8 enb_bit_idx; + u8 rst_bit_idx; + spinlock_t *lock; + u8 flags; +}; + +#define to_clk_pll_out(_hw) container_of(_hw, struct tegra_clk_pll_out, hw) + +extern const struct clk_ops tegra_clk_pll_out_ops; +struct clk *tegra_clk_register_pll_out(const char *name, + const char *parent_name, void __iomem *reg, u8 enb_bit_idx, + u8 rst_bit_idx, unsigned long flags, u8 pll_div_flags, + spinlock_t *lock); + +/** + * struct tegra_clk_periph_regs - Registers controlling peripheral clock + * + * @enb_reg: read the enable status + * @enb_set_reg: write 1 to enable clock + * @enb_clr_reg: write 1 to disable clock + * @rst_reg: read the reset status + * @rst_set_reg: write 1 to assert the reset of peripheral + * @rst_clr_reg: write 1 to deassert the reset of peripheral + */ +struct tegra_clk_periph_regs { + u32 enb_reg; + u32 enb_set_reg; + u32 enb_clr_reg; + u32 rst_reg; + u32 rst_set_reg; + u32 rst_clr_reg; +}; + +/** + * struct tegra_clk_periph_gate - peripheral gate clock + * + * @magic: magic number to validate type + * @hw: handle between common and hardware-specific interfaces + * @clk_base: address of CAR controller + * @regs: Registers to control the peripheral + * @flags: hardware-specific flags + * @clk_num: Clock number + * @enable_refcnt: array to maintain reference count of the clock + * + * Flags: + * TEGRA_PERIPH_NO_RESET - This flag indicates that reset is not allowed + * for this module. + * TEGRA_PERIPH_MANUAL_RESET - This flag indicates not to reset module + * after clock enable and driver for the module is responsible for + * doing reset. + * TEGRA_PERIPH_ON_APB - If peripheral is in the APB bus then read the + * bus to flush the write operation in apb bus. This flag indicates + * that this peripheral is in apb bus. + */ +struct tegra_clk_periph_gate { + u32 magic; + struct clk_hw hw; + void __iomem *clk_base; + u8 flags; + int clk_num; + int *enable_refcnt; + struct tegra_clk_periph_regs *regs; +}; + +#define to_clk_periph_gate(_hw) \ + container_of(_hw, struct tegra_clk_periph_gate, hw) + +#define TEGRA_CLK_PERIPH_GATE_MAGIC 0x17760309 + +#define TEGRA_PERIPH_NO_RESET BIT(0) +#define TEGRA_PERIPH_MANUAL_RESET BIT(1) +#define TEGRA_PERIPH_ON_APB BIT(2) + +void tegra_periph_reset(struct tegra_clk_periph_gate *gate, bool assert); +extern const struct clk_ops tegra_clk_periph_gate_ops; +struct clk *tegra_clk_register_periph_gate(const char *name, + const char *parent_name, u8 gate_flags, void __iomem *clk_base, + unsigned long flags, int clk_num, + struct tegra_clk_periph_regs *pregs, int *enable_refcnt); + +/** + * struct clk-periph - peripheral clock + * + * @magic: magic number to validate type + * @hw: handle between common and hardware-specific interfaces + * @mux: mux clock + * @divider: divider clock + * @gate: gate clock + * @mux_ops: mux clock ops + * @div_ops: divider clock ops + * @gate_ops: gate clock ops + */ +struct tegra_clk_periph { + u32 magic; + struct clk_hw hw; + struct clk_mux mux; + struct tegra_clk_frac_div divider; + struct tegra_clk_periph_gate gate; + + const struct clk_ops *mux_ops; + const struct clk_ops *div_ops; + const struct clk_ops *gate_ops; +}; + +#define to_clk_periph(_hw) container_of(_hw, struct tegra_clk_periph, hw) + +#define TEGRA_CLK_PERIPH_MAGIC 0x18221223 + +extern const struct clk_ops tegra_clk_periph_ops; +struct clk *tegra_clk_register_periph(const char *name, + const char **parent_names, int num_parents, + struct tegra_clk_periph *periph, void __iomem *clk_base, + u32 offset); +struct clk *tegra_clk_register_periph_nodiv(const char *name, + const char **parent_names, int num_parents, + struct tegra_clk_periph *periph, void __iomem *clk_base, + u32 offset); + +#define TEGRA_CLK_PERIPH(_mux_shift, _mux_width, _mux_flags, \ + _div_shift, _div_width, _div_frac_width, \ + _div_flags, _clk_num, _enb_refcnt, _regs, \ + _gate_flags) \ + { \ + .mux = { \ + .flags = _mux_flags, \ + .shift = _mux_shift, \ + .width = _mux_width, \ + }, \ + .divider = { \ + .flags = _div_flags, \ + .shift = _div_shift, \ + .width = _div_width, \ + .frac_width = _div_frac_width, \ + }, \ + .gate = { \ + .flags = _gate_flags, \ + .clk_num = _clk_num, \ + .enable_refcnt = _enb_refcnt, \ + .regs = _regs, \ + }, \ + .mux_ops = &clk_mux_ops, \ + .div_ops = &tegra_clk_frac_div_ops, \ + .gate_ops = &tegra_clk_periph_gate_ops, \ + } + +struct tegra_periph_init_data { + const char *name; + int clk_id; + const char **parent_names; + int num_parents; + struct tegra_clk_periph periph; + u32 offset; + const char *con_id; + const char *dev_id; +}; + +#define TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parent_names, _offset, \ + _mux_shift, _mux_width, _mux_flags, _div_shift, \ + _div_width, _div_frac_width, _div_flags, _regs, \ + _clk_num, _enb_refcnt, _gate_flags, _clk_id) \ + { \ + .name = _name, \ + .clk_id = _clk_id, \ + .parent_names = _parent_names, \ + .num_parents = ARRAY_SIZE(_parent_names), \ + .periph = TEGRA_CLK_PERIPH(_mux_shift, _mux_width, \ + _mux_flags, _div_shift, \ + _div_width, _div_frac_width, \ + _div_flags, _clk_num, \ + _enb_refcnt, _regs, \ + _gate_flags), \ + .offset = _offset, \ + .con_id = _con_id, \ + .dev_id = _dev_id, \ + } + +/** + * struct clk_super_mux - super clock + * + * @hw: handle between common and hardware-specific interfaces + * @reg: register controlling multiplexer + * @width: width of the multiplexer bit field + * @flags: hardware-specific flags + * @div2_index: bit controlling divide-by-2 + * @pllx_index: PLLX index in the parent list + * @lock: register lock + * + * Flags: + * TEGRA_DIVIDER_2 - LP cluster has additional divider. This flag indicates + * that this is LP cluster clock. + */ +struct tegra_clk_super_mux { + struct clk_hw hw; + void __iomem *reg; + u8 width; + u8 flags; + u8 div2_index; + u8 pllx_index; + spinlock_t *lock; +}; + +#define to_clk_super_mux(_hw) container_of(_hw, struct tegra_clk_super_mux, hw) + +#define TEGRA_DIVIDER_2 BIT(0) + +extern const struct clk_ops tegra_clk_super_ops; +struct clk *tegra_clk_register_super_mux(const char *name, + const char **parent_names, u8 num_parents, + unsigned long flags, void __iomem *reg, u8 clk_super_flags, + u8 width, u8 pllx_index, u8 div2_index, spinlock_t *lock); + +/** + * struct clk_init_tabel - clock initialization table + * @clk_id: clock id as mentioned in device tree bindings + * @parent_id: parent clock id as mentioned in device tree bindings + * @rate: rate to set + * @state: enable/disable + */ +struct tegra_clk_init_table { + unsigned int clk_id; + unsigned int parent_id; + unsigned long rate; + int state; +}; + +/** + * struct clk_duplicate - duplicate clocks + * @clk_id: clock id as mentioned in device tree bindings + * @lookup: duplicate lookup entry for the clock + */ +struct tegra_clk_duplicate { + int clk_id; + struct clk_lookup lookup; +}; + +#define TEGRA_CLK_DUPLICATE(_clk_id, _dev, _con) \ + { \ + .clk_id = _clk_id, \ + .lookup = { \ + .dev_id = _dev, \ + .con_id = _con, \ + }, \ + } + +void tegra_init_from_table(struct tegra_clk_init_table *tbl, + struct clk *clks[], int clk_max); + +void tegra_init_dup_clks(struct tegra_clk_duplicate *dup_list, + struct clk *clks[], int clk_max); + +#ifdef CONFIG_ARCH_TEGRA_2x_SOC +void tegra20_clock_init(struct device_node *np); +#else +static inline void tegra20_clock_init(struct device_node *np) {} +#endif /* CONFIG_ARCH_TEGRA_2x_SOC */ + +#ifdef CONFIG_ARCH_TEGRA_3x_SOC +void tegra30_clock_init(struct device_node *np); +#else +static inline void tegra30_clock_init(struct device_node *np) {} +#endif /* CONFIG_ARCH_TEGRA_3x_SOC */ + +#endif /* TEGRA_CLK_H */ |