1 files changed, 0 insertions, 117 deletions
diff --git a/arch/powerpc/platforms/wsp/wsp.c b/arch/powerpc/platforms/wsp/wsp.c
deleted file mode 100644
index 58cd1f00e1ef..000000000000
--- a/arch/powerpc/platforms/wsp/wsp.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Copyright 2008-2011, IBM Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/smp.h>
-#include <linux/delay.h>
-#include <linux/time.h>
-#include <linux/of_address.h>
-
-#include <asm/scom.h>
-
-#include "wsp.h"
-#include "ics.h"
-
-#define WSP_SOC_COMPATIBLE	"ibm,wsp-soc"
-#define PBIC_COMPATIBLE		"ibm,wsp-pbic"
-#define COPRO_COMPATIBLE	"ibm,wsp-coprocessor"
-
-static int __init wsp_probe_buses(void)
-{
-	static __initdata struct of_device_id bus_ids[] = {
-		/*
-		 * every node in between needs to be here or you won't
-		 * find it
-		 */
-		{ .compatible = WSP_SOC_COMPATIBLE, },
-		{ .compatible = PBIC_COMPATIBLE, },
-		{ .compatible = COPRO_COMPATIBLE, },
-		{},
-	};
-	of_platform_bus_probe(NULL, bus_ids, NULL);
-
-	return 0;
-}
-
-void __init wsp_setup_arch(void)
-{
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000;
-
-	scom_init_wsp();
-
-	/* Setup SMP callback */
-#ifdef CONFIG_SMP
-	a2_setup_smp();
-#endif
-#ifdef CONFIG_PCI
-	wsp_setup_pci();
-#endif
-}
-
-void __init wsp_setup_irq(void)
-{
-	wsp_init_irq();
-	opb_pic_init();
-}
-
-
-int __init wsp_probe_devices(void)
-{
-	struct device_node *np;
-
-	/* Our RTC is a ds1500. It seems to be programatically compatible
-	 * with the ds1511 for which we have a driver so let's use that
-	 */
-	np = of_find_compatible_node(NULL, NULL, "dallas,ds1500");
-	if (np != NULL) {
-		struct resource res;
-		if (of_address_to_resource(np, 0, &res) == 0)
-			platform_device_register_simple("ds1511", 0, &res, 1);
-	}
-
-	wsp_probe_buses();
-
-	return 0;
-}
-
-void wsp_halt(void)
-{
-	u64 val;
-	scom_map_t m;
-	struct device_node *dn;
-	struct device_node *mine;
-	struct device_node *me;
-	int rc;
-
-	me = of_get_cpu_node(smp_processor_id(), NULL);
-	mine = scom_find_parent(me);
-
-	/* This will halt all the A2s but not power off the chip */
-	for_each_node_with_property(dn, "scom-controller") {
-		if (dn == mine)
-			continue;
-		m = scom_map(dn, 0, 1);
-
-		/* read-modify-write it so the HW probe does not get
-		 * confused */
-		rc = scom_read(m, 0, &val);
-		if (rc == 0)
-			scom_write(m, 0, val | 1);
-		scom_unmap(m);
-	}
-	m = scom_map(mine, 0, 1);
-	rc = scom_read(m, 0, &val);
-	if (rc == 0)
-		scom_write(m, 0, val | 1);
-	/* should never return */
-	scom_unmap(m);
-}