diff options
109 files changed, 9331 insertions, 4138 deletions
diff --git a/Documentation/devicetree/bindings/arm/exynos/smp-sysram.txt b/Documentation/devicetree/bindings/arm/exynos/smp-sysram.txt new file mode 100644 index 000000000000..4a0a4f70a0ce --- /dev/null +++ b/Documentation/devicetree/bindings/arm/exynos/smp-sysram.txt @@ -0,0 +1,38 @@ +Samsung Exynos SYSRAM for SMP bringup: +------------------------------------ + +Samsung SMP-capable Exynos SoCs use part of the SYSRAM for the bringup +of the secondary cores. Once the core gets powered up it executes the +code that is residing at some specific location of the SYSRAM. + +Therefore reserved section sub-nodes have to be added to the mmio-sram +declaration. These nodes are of two types depending upon secure or +non-secure execution environment. + +Required sub-node properties: +- compatible : depending upon boot mode, should be + "samsung,exynos4210-sysram" : for Secure SYSRAM + "samsung,exynos4210-sysram-ns" : for Non-secure SYSRAM + +The rest of the properties should follow the generic mmio-sram discription +found in ../../misc/sysram.txt + +Example: + + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x54000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x54000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@53000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x53000 0x1000>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/exynos3250-clock.txt b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt new file mode 100644 index 000000000000..aadc9c59e2d1 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt @@ -0,0 +1,41 @@ +* Samsung Exynos3250 Clock Controller + +The Exynos3250 clock controller generates and supplies clock to various +controllers within the Exynos3250 SoC. + +Required Properties: + +- compatible: should be one of the following. + - "samsung,exynos3250-cmu" - controller compatible with Exynos3250 SoC. + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. + +All available clocks are defined as preprocessor macros in +dt-bindings/clock/exynos3250.h header and can be used in device +tree sources. + +Example 1: An example of a clock controller node is listed below. + + cmu: clock-controller@10030000 { + compatible = "samsung,exynos3250-cmu"; + reg = <0x10030000 0x20000>; + #clock-cells = <1>; + }; + +Example 2: UART controller node that consumes the clock generated by the clock + controller. Refer to the standard clock bindings for information + about 'clocks' and 'clock-names' property. + + serial@13800000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13800000 0x100>; + interrupts = <0 109 0>; + clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + }; diff --git a/Documentation/devicetree/bindings/clock/exynos5260-clock.txt b/Documentation/devicetree/bindings/clock/exynos5260-clock.txt new file mode 100644 index 000000000000..5496b2fac483 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/exynos5260-clock.txt @@ -0,0 +1,190 @@ +* Samsung Exynos5260 Clock Controller + +Exynos5260 has 13 clock controllers which are instantiated +independently from the device-tree. These clock controllers +generate and supply clocks to various hardware blocks within +the SoC. + +Each clock is assigned an identifier and client nodes can use +this identifier to specify the clock which they consume. All +available clocks are defined as preprocessor macros in +dt-bindings/clock/exynos5260-clk.h header and can be used in +device tree sources. + +External clocks: + +There are several clocks that are generated outside the SoC. It +is expected that they are defined using standard clock bindings +with following clock-output-names: + + - "fin_pll" - PLL input clock from XXTI + - "xrtcxti" - input clock from XRTCXTI + - "ioclk_pcm_extclk" - pcm external operation clock + - "ioclk_spdif_extclk" - spdif external operation clock + - "ioclk_i2s_cdclk" - i2s0 codec clock + +Phy clocks: + +There are several clocks which are generated by specific PHYs. +These clocks are fed into the clock controller and then routed to +the hardware blocks. These clocks are defined as fixed clocks in the +driver with following names: + + - "phyclk_dptx_phy_ch3_txd_clk" - dp phy clock for channel 3 + - "phyclk_dptx_phy_ch2_txd_clk" - dp phy clock for channel 2 + - "phyclk_dptx_phy_ch1_txd_clk" - dp phy clock for channel 1 + - "phyclk_dptx_phy_ch0_txd_clk" - dp phy clock for channel 0 + - "phyclk_hdmi_phy_tmds_clko" - hdmi phy tmds clock + - "phyclk_hdmi_phy_pixel_clko" - hdmi phy pixel clock + - "phyclk_hdmi_link_o_tmds_clkhi" - hdmi phy for hdmi link + - "phyclk_dptx_phy_o_ref_clk_24m" - dp phy reference clock + - "phyclk_dptx_phy_clk_div2" + - "phyclk_mipi_dphy_4l_m_rxclkesc0" + - "phyclk_usbhost20_phy_phyclock" - usb 2.0 phy clock + - "phyclk_usbhost20_phy_freeclk" + - "phyclk_usbhost20_phy_clk48mohci" + - "phyclk_usbdrd30_udrd30_pipe_pclk" + - "phyclk_usbdrd30_udrd30_phyclock" - usb 3.0 phy clock + +Required Properties for Clock Controller: + + - compatible: should be one of the following. + 1) "samsung,exynos5260-clock-top" + 2) "samsung,exynos5260-clock-peri" + 3) "samsung,exynos5260-clock-egl" + 4) "samsung,exynos5260-clock-kfc" + 5) "samsung,exynos5260-clock-g2d" + 6) "samsung,exynos5260-clock-mif" + 7) "samsung,exynos5260-clock-mfc" + 8) "samsung,exynos5260-clock-g3d" + 9) "samsung,exynos5260-clock-fsys" + 10) "samsung,exynos5260-clock-aud" + 11) "samsung,exynos5260-clock-isp" + 12) "samsung,exynos5260-clock-gscl" + 13) "samsung,exynos5260-clock-disp" + + - reg: physical base address of the controller and the length of + memory mapped region. + + - #clock-cells: should be 1. + + - clocks: list of clock identifiers which are fed as the input to + the given clock controller. Please refer the next section to find + the input clocks for a given controller. + + - clock-names: list of names of clocks which are fed as the input + to the given clock controller. + +Input clocks for top clock controller: + - fin_pll + - dout_mem_pll + - dout_bus_pll + - dout_media_pll + +Input clocks for peri clock controller: + - fin_pll + - ioclk_pcm_extclk + - ioclk_i2s_cdclk + - ioclk_spdif_extclk + - phyclk_hdmi_phy_ref_cko + - dout_aclk_peri_66 + - dout_sclk_peri_uart0 + - dout_sclk_peri_uart1 + - dout_sclk_peri_uart2 + - dout_sclk_peri_spi0_b + - dout_sclk_peri_spi1_b + - dout_sclk_peri_spi2_b + - dout_aclk_peri_aud + - dout_sclk_peri_spi0_b + +Input clocks for egl clock controller: + - fin_pll + - dout_bus_pll + +Input clocks for kfc clock controller: + - fin_pll + - dout_media_pll + +Input clocks for g2d clock controller: + - fin_pll + - dout_aclk_g2d_333 + +Input clocks for mif clock controller: + - fin_pll + +Input clocks for mfc clock controller: + - fin_pll + - dout_aclk_mfc_333 + +Input clocks for g3d clock controller: + - fin_pll + +Input clocks for fsys clock controller: + - fin_pll + - phyclk_usbhost20_phy_phyclock + - phyclk_usbhost20_phy_freeclk + - phyclk_usbhost20_phy_clk48mohci + - phyclk_usbdrd30_udrd30_pipe_pclk + - phyclk_usbdrd30_udrd30_phyclock + - dout_aclk_fsys_200 + +Input clocks for aud clock controller: + - fin_pll + - fout_aud_pll + - ioclk_i2s_cdclk + - ioclk_pcm_extclk + +Input clocks for isp clock controller: + - fin_pll + - dout_aclk_isp1_266 + - dout_aclk_isp1_400 + - mout_aclk_isp1_266 + +Input clocks for gscl clock controller: + - fin_pll + - dout_aclk_gscl_400 + - dout_aclk_gscl_333 + +Input clocks for disp clock controller: + - fin_pll + - phyclk_dptx_phy_ch3_txd_clk + - phyclk_dptx_phy_ch2_txd_clk + - phyclk_dptx_phy_ch1_txd_clk + - phyclk_dptx_phy_ch0_txd_clk + - phyclk_hdmi_phy_tmds_clko + - phyclk_hdmi_phy_ref_clko + - phyclk_hdmi_phy_pixel_clko + - phyclk_hdmi_link_o_tmds_clkhi + - phyclk_mipi_dphy_4l_m_txbyte_clkhs + - phyclk_dptx_phy_o_ref_clk_24m + - phyclk_dptx_phy_clk_div2 + - phyclk_mipi_dphy_4l_m_rxclkesc0 + - phyclk_hdmi_phy_ref_cko + - ioclk_spdif_extclk + - dout_aclk_peri_aud + - dout_aclk_disp_222 + - dout_sclk_disp_pixel + - dout_aclk_disp_333 + +Example 1: An example of a clock controller node is listed below. + + clock_mfc: clock-controller@11090000 { + compatible = "samsung,exynos5260-clock-mfc"; + clock = <&fin_pll>, <&clock_top TOP_DOUT_ACLK_MFC_333>; + clock-names = "fin_pll", "dout_aclk_mfc_333"; + reg = <0x11090000 0x10000>; + #clock-cells = <1>; + }; + +Example 2: UART controller node that consumes the clock generated by the + peri clock controller. Refer to the standard clock bindings for + information about 'clocks' and 'clock-names' property. + + serial@12C00000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C00000 0x100>; + interrupts = <0 146 0>; + clocks = <&clock_peri PERI_PCLK_UART0>, <&clock_peri PERI_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + }; + diff --git a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt index ca88c97a8562..d54f42cf0440 100644 --- a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt @@ -1,12 +1,13 @@ * Samsung Exynos5420 Clock Controller The Exynos5420 clock controller generates and supplies clock to various -controllers within the Exynos5420 SoC. +controllers within the Exynos5420 SoC and for the Exynos5800 SoC. Required Properties: - compatible: should be one of the following. - "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC. + - "samsung,exynos5800-clock" - controller compatible with Exynos5800 SoC. - reg: physical base address of the controller and length of memory mapped region. diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt new file mode 100644 index 000000000000..822505e715ae --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt @@ -0,0 +1,50 @@ +* Samsung S3C2410 Clock Controller + +The S3C2410 clock controller generates and supplies clock to various controllers +within the SoC. The clock binding described here is applicable to the s3c2410, +s3c2440 and s3c2442 SoCs in the s3c24x family. + +Required Properties: + +- compatible: should be one of the following. + - "samsung,s3c2410-clock" - controller compatible with S3C2410 SoC. + - "samsung,s3c2440-clock" - controller compatible with S3C2440 SoC. + - "samsung,s3c2442-clock" - controller compatible with S3C2442 SoC. +- reg: physical base address of the controller and length of memory mapped + region. +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. Some of the clocks are available only +on a particular SoC. + +All available clocks are defined as preprocessor macros in +dt-bindings/clock/s3c2410.h header and can be used in device +tree sources. + +External clocks: + +The xti clock used as input for the plls is generated outside the SoC. It is +expected that is are defined using standard clock bindings with a +clock-output-names value of "xti". + +Example: Clock controller node: + + clocks: clock-controller@4c000000 { + compatible = "samsung,s3c2410-clock"; + reg = <0x4c000000 0x20>; + #clock-cells = <1>; + }; + +Example: UART controller node that consumes the clock generated by the clock + controller (refer to the standard clock bindings for information about + "clocks" and "clock-names" properties): + + serial@50004000 { + compatible = "samsung,s3c2440-uart"; + reg = <0x50004000 0x4000>; + interrupts = <1 23 3 4>, <1 23 4 4>; + clock-names = "uart", "clk_uart_baud2"; + clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt new file mode 100644 index 000000000000..2b430960ba47 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt @@ -0,0 +1,50 @@ +* Samsung S3C2412 Clock Controller + +The S3C2412 clock controller generates and supplies clock to various controllers +within the SoC. The clock binding described here is applicable to the s3c2412 +and s3c2413 SoCs in the s3c24x family. + +Required Properties: + +- compatible: should be "samsung,s3c2412-clock" +- reg: physical base address of the controller and length of memory mapped + region. +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. Some of the clocks are available only +on a particular SoC. + +All available clocks are defined as preprocessor macros in +dt-bindings/clock/s3c2412.h header and can be used in device +tree sources. + +External clocks: + +There are several clocks that are generated outside the SoC. It is expected +that they are defined using standard clock bindings with following +clock-output-names: + - "xti" - crystal input - required, + - "ext" - external clock source - optional, + +Example: Clock controller node: + + clocks: clock-controller@4c000000 { + compatible = "samsung,s3c2412-clock"; + reg = <0x4c000000 0x20>; + #clock-cells = <1>; + }; + +Example: UART controller node that consumes the clock generated by the clock + controller (refer to the standard clock bindings for information about + "clocks" and "clock-names" properties): + + serial@50004000 { + compatible = "samsung,s3c2412-uart"; + reg = <0x50004000 0x4000>; + interrupts = <1 23 3 4>, <1 23 4 4>; + clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3"; + clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, + <&clocks SCLK_UART>; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt new file mode 100644 index 000000000000..e67bb05478af --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt @@ -0,0 +1,56 @@ +* Samsung S3C2443 Clock Controller + +The S3C2443 clock controller generates and supplies clock to various controllers +within the SoC. The clock binding described here is applicable to all SoCs in +the s3c24x family starting with the s3c2443. + +Required Properties: + +- compatible: should be one of the following. + - "samsung,s3c2416-clock" - controller compatible with S3C2416 SoC. + - "samsung,s3c2443-clock" - controller compatible with S3C2443 SoC. + - "samsung,s3c2450-clock" - controller compatible with S3C2450 SoC. +- reg: physical base address of the controller and length of memory mapped + region. +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. Some of the clocks are available only +on a particular SoC. + +All available clocks are defined as preprocessor macros in +dt-bindings/clock/s3c2443.h header and can be used in device +tree sources. + +External clocks: + +There are several clocks that are generated outside the SoC. It is expected +that they are defined using standard clock bindings with following +clock-output-names: + - "xti" - crystal input - required, + - "ext" - external clock source - optional, + - "ext_i2s" - external I2S clock - optional, + - "ext_uart" - external uart clock - optional, + +Example: Clock controller node: + + clocks: clock-controller@4c000000 { + compatible = "samsung,s3c2416-clock"; + reg = <0x4c000000 0x40>; + #clock-cells = <1>; + }; + +Example: UART controller node that consumes the clock generated by the clock + controller (refer to the standard clock bindings for information about + "clocks" and "clock-names" properties): + + serial@50004000 { + compatible = "samsung,s3c2440-uart"; + reg = <0x50004000 0x4000>; + interrupts = <1 23 3 4>, <1 23 4 4>; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, + <&clocks SCLK_UART>; + status = "disabled"; + }; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index db3c5414223e..3a45547b20e7 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -755,7 +755,7 @@ config ARCH_S3C64XX select ATAGS select CLKDEV_LOOKUP select CLKSRC_SAMSUNG_PWM - select COMMON_CLK + select COMMON_CLK_SAMSUNG select CPU_V6K select GENERIC_CLOCKEVENTS select GPIO_SAMSUNG @@ -836,7 +836,7 @@ config ARCH_EXYNOS select ARCH_REQUIRE_GPIOLIB select ARCH_SPARSEMEM_ENABLE select ARM_GIC - select COMMON_CLK + select COMMON_CLK_SAMSUNG select CPU_V7 select GENERIC_CLOCKEVENTS select HAVE_S3C2410_I2C if I2C @@ -844,6 +844,7 @@ config ARCH_EXYNOS select HAVE_S3C_RTC if RTC_CLASS select NEED_MACH_MEMORY_H select SPARSE_IRQ + select SRAM select USE_OF help Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5) diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 377b7c364033..b20c46233bd9 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -73,6 +73,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos5250-smdk5250.dtb \ exynos5250-snow.dtb \ exynos5420-arndale-octa.dtb \ + exynos5420-peach-pit.dtb \ exynos5420-smdk5420.dtb \ exynos5440-sd5v1.dtb \ exynos5440-ssdk5440.dtb diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 2f8bcd068d17..58ff8e28c74f 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -129,12 +129,10 @@ status = "disabled"; #address-cells = <1>; #size-cells = <1>; + #clock-cells = <1>; + clock-output-names = "cam_a_clkout", "cam_b_clkout"; ranges; - clock_cam: clock-controller { - #clock-cells = <1>; - }; - fimc_0: fimc@11800000 { compatible = "samsung,exynos4210-fimc"; reg = <0x11800000 0x1000>; @@ -371,6 +369,8 @@ interrupts = <0 60 0>; clocks = <&clock CLK_I2C2>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_bus>; status = "disabled"; }; @@ -382,6 +382,8 @@ interrupts = <0 61 0>; clocks = <&clock CLK_I2C3>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_bus>; status = "disabled"; }; @@ -393,6 +395,8 @@ interrupts = <0 62 0>; clocks = <&clock CLK_I2C4>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_bus>; status = "disabled"; }; @@ -404,6 +408,8 @@ interrupts = <0 63 0>; clocks = <&clock CLK_I2C5>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_bus>; status = "disabled"; }; @@ -415,6 +421,8 @@ interrupts = <0 64 0>; clocks = <&clock CLK_I2C6>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_bus>; status = "disabled"; }; @@ -426,6 +434,8 @@ interrupts = <0 65 0>; clocks = <&clock CLK_I2C7>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_bus>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 63e34b24b04f..9296dee10e26 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -28,6 +28,21 @@ bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1"; }; + sysram@02020000 { + smp-sysram@0 { + status = "disabled"; + }; + + smp-sysram@5000 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x5000 0x1000>; + }; + + smp-sysram@1f000 { + status = "disabled"; + }; + }; + mct@10050000 { compatible = "none"; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index cacf6140dd2f..ee3001f38821 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -31,6 +31,24 @@ pinctrl2 = &pinctrl_2; }; + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x20000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@1f000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x1f000 0x1000>; + }; + }; + pd_lcd1: lcd1-power-domain@10023CA0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 9583563dd0ef..f621fd976815 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -20,7 +20,7 @@ compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4"; aliases { - i2c8 = &i2c_ak8975; + i2c9 = &i2c_ak8975; }; memory { @@ -80,7 +80,24 @@ enable-active-high; }; - /* More to come */ + cam_af_reg: voltage-regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "CAM_AF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpm0 4 0>; + enable-active-high; + }; + + cam_isp_core_reg: voltage-regulator-4 { + compatible = "regulator-fixed"; + regulator-name = "CAM_ISP_CORE_1.2V_EN"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&gpm0 3 0>; + enable-active-high; + regulator-always-on; + }; }; gpio-keys { @@ -140,6 +157,38 @@ }; }; + i2c_0: i2c@13860000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c0_bus>; + pinctrl-names = "default"; + status = "okay"; + + s5c73m3@3c { + compatible = "samsung,s5c73m3"; + reg = <0x3c>; + standby-gpios = <&gpm0 1 1>; /* ISP_STANDBY */ + xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */ + vdd-int-supply = <&buck9_reg>; + vddio-cis-supply = <&ldo9_reg>; + vdda-supply = <&ldo17_reg>; + vddio-host-supply = <&ldo18_reg>; + vdd-af-supply = <&cam_af_reg>; + vdd-reg-supply = <&cam_io_reg>; + clock-frequency = <24000000>; + /* CAM_A_CLKOUT */ + clocks = <&camera 0>; + clock-names = "cis_extclk"; + port { + s5c73m3_ep: endpoint { + remote-endpoint = <&csis0_ep>; + data-lanes = <1 2 3 4>; + }; + }; + }; + }; + i2c@138D0000 { samsung,i2c-sda-delay = <100>; samsung,i2c-slave-addr = <0x10>; @@ -586,8 +635,8 @@ status = "okay"; }; - camera { - pinctrl-0 = <&cam_port_b_clk_active>; + camera: camera { + pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>; pinctrl-names = "default"; status = "okay"; @@ -607,6 +656,23 @@ status = "okay"; }; + csis_0: csis@11880000 { + status = "okay"; + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + clock-frequency = <176000000>; + + /* Camera C (3) MIPI CSI-2 (CSIS0) */ + port@3 { + reg = <3>; + csis0_ep: endpoint { + remote-endpoint = <&s5c73m3_ep>; + data-lanes = <1 2 3 4>; + samsung,csis-hs-settle = <12>; + }; + }; + }; + csis_1: csis@11890000 { vddcore-supply = <&ldo8_reg>; vddio-supply = <&ldo10_reg>; @@ -647,10 +713,11 @@ reg = <0x10>; svdda-supply = <&cam_io_reg>; svddio-supply = <&ldo19_reg>; + afvdd-supply = <&ldo19_reg>; clock-frequency = <24000000>; /* CAM_B_CLKOUT */ - clocks = <&clock_cam 1>; - clock-names = "mclk"; + clocks = <&camera 1>; + clock-names = "extclk"; samsung,camclk-out = <1>; gpios = <&gpm1 6 0>; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index c4a9306f8529..70e3765b51ee 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -37,6 +37,24 @@ interrupts = <2 2>, <3 2>, <18 2>, <19 2>; }; + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x40000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@2f000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x2f000 0x1000>; + }; + }; + pd_isp: isp-power-domain@10023CA0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 37423314a028..e44693e2cfda 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -72,6 +72,24 @@ }; }; + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x30000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x30000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@2f000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x2f000 0x1000>; + }; + }; + pd_gsc: gsc-power-domain@10044000 { compatible = "samsung,exynos4210-pd"; reg = <0x10044000 0x20>; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts new file mode 100644 index 000000000000..fae33dddac39 --- /dev/null +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -0,0 +1,147 @@ +/* + * Google Peach Pit Rev 6+ board device tree source + * + * Copyright (c) 2014 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "exynos5420.dtsi" + +/ { + model = "Google Peach Pit Rev 6+"; + + compatible = "google,pit-rev16", + "google,pit-rev15", "google,pit-rev14", + "google,pit-rev13", "google,pit-rev12", + "google,pit-rev11", "google,pit-rev10", + "google,pit-rev9", "google,pit-rev8", + "google,pit-rev7", "google,pit-rev6", + "google,pit", "google,peach","samsung,exynos5420", + "samsung,exynos5"; + + memory { + reg = <0x20000000 0x80000000>; + }; + + fixed-rate-clocks { + oscclk { + compatible = "samsung,exynos5420-oscclk"; + clock-frequency = <24000000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&power_key_irq>; + + power { + label = "Power"; + gpios = <&gpx1 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 1000000 0>; + brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; + default-brightness-level = <7>; + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + }; +}; + +&pinctrl_0 { + tpm_irq: tpm-irq { + samsung,pins = "gpx1-0"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + power_key_irq: power-key-irq { + samsung,pins = "gpx1-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&rtc { + status = "okay"; +}; + +&uart_3 { + status = "okay"; +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + broken-cd; + caps2-mmc-hs200-1_8v; + supports-highspeed; + non-removable; + card-detect-delay = <200>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + supports-highspeed; + card-detect-delay = <200>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + + slot@0 { + reg = <0>; + bus-width = <4>; + }; +}; + +&hsi2c_9 { + status = "okay"; + clock-frequency = <400000>; + + tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + + /* Unused irq; but still need to configure the pins */ + pinctrl-names = "default"; + pinctrl-0 = <&tpm_irq>; + }; +}; + +/* + * Use longest HW watchdog in SoC (32 seconds) since the hardware + * watchdog provides no debugging information (compared to soft/hard + * lockup detectors) and so should be last resort. + */ +&watchdog { + timeout-sec = <32>; +}; diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi index e62c8eb57438..ba686e40eac7 100644 --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi @@ -624,6 +624,34 @@ samsung,pin-drv = <0>; }; + pwm0_out: pwm0-out { + samsung,pins = "gpb2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpb2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpb2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpb2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + i2c7_hs_bus: i2c7-hs-bus { samsung,pins = "gpb2-2", "gpb2-3"; samsung,pin-function = <3>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index c3a9a66c5767..3c530722e8dc 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -58,6 +58,7 @@ compatible = "arm,cortex-a15"; reg = <0x0>; clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; }; cpu1: cpu@1 { @@ -65,6 +66,7 @@ compatible = "arm,cortex-a15"; reg = <0x1>; clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; }; cpu2: cpu@2 { @@ -72,6 +74,7 @@ compatible = "arm,cortex-a15"; reg = <0x2>; clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; }; cpu3: cpu@3 { @@ -79,6 +82,7 @@ compatible = "arm,cortex-a15"; reg = <0x3>; clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; }; cpu4: cpu@100 { @@ -86,6 +90,7 @@ compatible = "arm,cortex-a7"; reg = <0x100>; clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; }; cpu5: cpu@101 { @@ -93,6 +98,7 @@ compatible = "arm,cortex-a7"; reg = <0x101>; clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; }; cpu6: cpu@102 { @@ -100,6 +106,7 @@ compatible = "arm,cortex-a7"; reg = <0x102>; clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; }; cpu7: cpu@103 { @@ -107,6 +114,44 @@ compatible = "arm,cortex-a7"; reg = <0x103>; clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; + }; + }; + + cci@10d20000 { + compatible = "arm,cci-400"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x10d20000 0x1000>; + ranges = <0x0 0x10d20000 0x6000>; + + cci_control0: slave-if@4000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x4000 0x1000>; + }; + cci_control1: slave-if@5000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x5000 0x1000>; + }; + }; + + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x54000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x54000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@53000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x53000 0x1000>; }; }; @@ -125,7 +170,7 @@ clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; }; - codec@11000000 { + mfc: codec@11000000 { compatible = "samsung,mfc-v7"; reg = <0x11000000 0x10000>; interrupts = <0 96 0>; @@ -169,7 +214,7 @@ status = "disabled"; }; - mct@101C0000 { + mct: mct@101C0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; interrupt-controller; @@ -270,7 +315,7 @@ interrupts = <0 47 0>; }; - rtc@101E0000 { + rtc: rtc@101E0000 { clocks = <&clock CLK_RTC>; clock-names = "rtc"; status = "disabled"; @@ -430,22 +475,22 @@ status = "disabled"; }; - serial@12C00000 { + uart_0: serial@12C00000 { clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; }; - serial@12C10000 { + uart_1: serial@12C10000 { clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; }; - serial@12C20000 { + uart_2: serial@12C20000 { clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; }; - serial@12C30000 { + uart_3: serial@12C30000 { clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; clock-names = "uart", "clk_uart_baud0"; }; @@ -465,14 +510,14 @@ #phy-cells = <0>; }; - dp-controller@145B0000 { + dp: dp-controller@145B0000 { clocks = <&clock CLK_DP1>; clock-names = "dp"; phys = <&dp_phy>; phy-names = "dp"; }; - fimd@14400000 { + fimd: fimd@14400000 { samsung,power-domain = <&disp_pd>; clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; clock-names = "sclk_fimd", "fimd"; @@ -549,7 +594,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c4_hs_bus>; - clocks = <&clock CLK_I2C4>; + clocks = <&clock CLK_USI0>; clock-names = "hsi2c"; status = "disabled"; }; @@ -562,7 +607,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c5_hs_bus>; - clocks = <&clock CLK_I2C5>; + clocks = <&clock CLK_USI1>; clock-names = "hsi2c"; status = "disabled"; }; @@ -575,7 +620,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c6_hs_bus>; - clocks = <&clock CLK_I2C6>; + clocks = <&clock CLK_USI2>; clock-names = "hsi2c"; status = "disabled"; }; @@ -588,7 +633,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c7_hs_bus>; - clocks = <&clock CLK_I2C7>; + clocks = <&clock CLK_USI3>; clock-names = "hsi2c"; status = "disabled"; }; @@ -601,7 +646,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c8_hs_bus>; - clocks = <&clock CLK_I2C8>; + clocks = <&clock CLK_USI4>; clock-names = "hsi2c"; status = "disabled"; }; @@ -614,7 +659,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c9_hs_bus>; - clocks = <&clock CLK_I2C9>; + clocks = <&clock CLK_USI5>; clock-names = "hsi2c"; status = "disabled"; }; @@ -627,12 +672,12 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c10_hs_bus>; - clocks = <&clock CLK_I2C10>; + clocks = <&clock CLK_USI6>; clock-names = "hsi2c"; status = "disabled"; }; - hdmi@14530000 { + hdmi: hdmi@14530000 { compatible = "samsung,exynos4212-hdmi"; reg = <0x14530000 0x70000>; interrupts = <0 95 0>; @@ -644,7 +689,7 @@ status = "disabled"; }; - mixer@14450000 { + mixer: mixer@14450000 { compatible = "samsung,exynos5420-mixer"; reg = <0x14450000 0x10000>; interrupts = <0 94 0>; @@ -715,7 +760,7 @@ clock-names = "tmu_apbif", "tmu_triminfo_apbif"; }; - watchdog@101D0000 { + watchdog: watchdog@101D0000 { compatible = "samsung,exynos5420-wdt"; reg = <0x101D0000 0x100>; interrupts = <0 42 0>; @@ -724,7 +769,7 @@ samsung,syscon-phandle = <&pmu_system_controller>; }; - sss@10830000 { + sss: sss@10830000 { compatible = "samsung,exynos4210-secss"; reg = <0x10830000 0x10000>; interrupts = <0 112 0>; diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts index 59594cf15998..ea92fd69529a 100644 --- a/arch/arm/boot/dts/s3c2416-smdk2416.dts +++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts @@ -19,6 +19,19 @@ reg = <0x30000000 0x4000000>; }; + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + xti: xti { + compatible = "fixed-clock"; + clock-frequency = <12000000>; + clock-output-names = "xti"; + #clock-cells = <0>; + }; + }; + serial@50000000 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi index e6555bdd81b8..955e4a4f8c31 100644 --- a/arch/arm/boot/dts/s3c2416.dtsi +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ +#include <dt-bindings/clock/s3c2443.h> #include "s3c24xx.dtsi" #include "s3c2416-pinctrl.dtsi" @@ -28,26 +29,53 @@ compatible = "samsung,s3c2416-irq"; }; + clocks: clock-controller@0x4c000000 { + compatible = "samsung,s3c2416-clock"; + reg = <0x4c000000 0x40>; + #clock-cells = <1>; + }; + pinctrl@56000000 { compatible = "samsung,s3c2416-pinctrl"; }; + timer@51000000 { + clocks = <&clocks PCLK_PWM>; + clock-names = "timers"; + }; + serial@50000000 { compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, + <&clocks SCLK_UART>; }; serial@50004000 { compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>, + <&clocks SCLK_UART>; }; serial@50008000 { compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>, + <&clocks SCLK_UART>; }; serial@5000C000 { compatible = "samsung,s3c2440-uart"; reg = <0x5000C000 0x4000>; interrupts = <1 18 24 4>, <1 18 25 4>; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>, + <&clocks SCLK_UART>; status = "disabled"; }; @@ -55,6 +83,10 @@ compatible = "samsung,s3c6410-sdhci"; reg = <0x4AC00000 0x100>; interrupts = <0 0 21 3>; + clock-names = "hsmmc", "mmc_busclk.0", + "mmc_busclk.2"; + clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>, + <&clocks MUX_HSMMC0>; status = "disabled"; }; @@ -62,18 +94,28 @@ compatible = "samsung,s3c6410-sdhci"; reg = <0x4A800000 0x100>; interrupts = <0 0 20 3>; + clock-names = "hsmmc", "mmc_busclk.0", + "mmc_busclk.2"; + clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>, + <&clocks MUX_HSMMC1>; status = "disabled"; }; watchdog@53000000 { interrupts = <1 9 27 3>; + clocks = <&clocks PCLK_WDT>; + clock-names = "watchdog"; }; rtc@57000000 { compatible = "samsung,s3c2416-rtc"; + clocks = <&clocks PCLK_RTC>; + clock-names = "rtc"; }; i2c@54000000 { compatible = "samsung,s3c2440-i2c"; + clocks = <&clocks PCLK_I2C0>; + clock-names = "i2c"; }; }; diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index fc8bf18e222d..1602abce6ec0 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -110,4 +110,12 @@ config SOC_EXYNOS5440 endmenu +config EXYNOS5420_MCPM + bool "Exynos5420 Multi-Cluster PM support" + depends on MCPM && SOC_EXYNOS5420 + select ARM_CCI + help + This is needed to provide CPU and cluster power management + on Exynos5420 implementing big.LITTLE. + endif diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index a656dbe3b78c..3705048f744a 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -16,7 +16,6 @@ obj-$(CONFIG_ARCH_EXYNOS) += exynos.o obj-$(CONFIG_PM_SLEEP) += pm.o sleep.o obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o -obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_ARCH_EXYNOS) += pmu.o @@ -29,3 +28,5 @@ obj-$(CONFIG_ARCH_EXYNOS) += firmware.o plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_exynos-smc.o :=-Wa,-march=armv7-a$(plus_sec) + +obj-$(CONFIG_EXYNOS5420_MCPM) += mcpm-exynos.o diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 9ef3f83efaff..5848d3cc29e9 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -18,6 +18,8 @@ void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1); struct map_desc; +extern void __iomem *sysram_ns_base_addr; +extern void __iomem *sysram_base_addr; void exynos_init_io(void); void exynos_restart(enum reboot_mode mode, const char *cmd); void exynos_cpuidle_init(void); @@ -62,5 +64,12 @@ struct exynos_pmu_conf { }; extern void exynos_sys_powerdown_conf(enum sys_powerdown mode); +extern void exynos_cpu_power_down(int cpu); +extern void exynos_cpu_power_up(int cpu); +extern int exynos_cpu_power_state(int cpu); +extern void exynos_cluster_power_down(int cluster); +extern void exynos_cluster_power_up(int cluster); +extern int exynos_cluster_power_state(int cluster); +extern void exynos_enter_aftr(void); #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */ diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c deleted file mode 100644 index c57cae0e8779..000000000000 --- a/arch/arm/mach-exynos/cpuidle.c +++ /dev/null @@ -1,256 +0,0 @@ -/* linux/arch/arm/mach-exynos4/cpuidle.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/cpuidle.h> -#include <linux/cpu_pm.h> -#include <linux/io.h> -#include <linux/export.h> -#include <linux/module.h> -#include <linux/time.h> -#include <linux/platform_device.h> - -#include <asm/proc-fns.h> -#include <asm/smp_scu.h> -#include <asm/suspend.h> -#include <asm/unified.h> -#include <asm/cpuidle.h> - -#include <plat/cpu.h> -#include <plat/pm.h> - -#include <mach/map.h> - -#include "common.h" -#include "regs-pmu.h" - -#define REG_DIRECTGO_ADDR (samsung_rev() == EXYNOS4210_REV_1_1 ? \ - S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \ - (S5P_VA_SYSRAM + 0x24) : S5P_INFORM0)) -#define REG_DIRECTGO_FLAG (samsung_rev() == EXYNOS4210_REV_1_1 ? \ - S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \ - (S5P_VA_SYSRAM + 0x20) : S5P_INFORM1)) - -#define S5P_CHECK_AFTR 0xFCBA0D10 - -#define EXYNOS5_PWR_CTRL1 (S5P_VA_CMU + 0x01020) -#define EXYNOS5_PWR_CTRL2 (S5P_VA_CMU + 0x01024) - -#define PWR_CTRL1_CORE2_DOWN_RATIO (7 << 28) -#define PWR_CTRL1_CORE1_DOWN_RATIO (7 << 16) -#define PWR_CTRL1_DIV2_DOWN_EN (1 << 9) -#define PWR_CTRL1_DIV1_DOWN_EN (1 << 8) -#define PWR_CTRL1_USE_CORE1_WFE (1 << 5) -#define PWR_CTRL1_USE_CORE0_WFE (1 << 4) -#define PWR_CTRL1_USE_CORE1_WFI (1 << 1) -#define PWR_CTRL1_USE_CORE0_WFI (1 << 0) - -#define PWR_CTRL2_DIV2_UP_EN (1 << 25) -#define PWR_CTRL2_DIV1_UP_EN (1 << 24) -#define PWR_CTRL2_DUR_STANDBY2_VAL (1 << 16) -#define PWR_CTRL2_DUR_STANDBY1_VAL (1 << 8) -#define PWR_CTRL2_CORE2_UP_RATIO (1 << 4) -#define PWR_CTRL2_CORE1_UP_RATIO (1 << 0) - -static int exynos4_enter_lowpower(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index); - -static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device); - -static struct cpuidle_driver exynos4_idle_driver = { - .name = "exynos4_idle", - .owner = THIS_MODULE, - .states = { - [0] = ARM_CPUIDLE_WFI_STATE, - [1] = { - .enter = exynos4_enter_lowpower, - .exit_latency = 300, - .target_residency = 100000, - .flags = CPUIDLE_FLAG_TIME_VALID, - .name = "C1", - .desc = "ARM power down", - }, - }, - .state_count = 2, - .safe_state_index = 0, -}; - -/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */ -static void exynos4_set_wakeupmask(void) -{ - __raw_writel(0x0000ff3e, S5P_WAKEUP_MASK); -} - -static unsigned int g_pwr_ctrl, g_diag_reg; - -static void save_cpu_arch_register(void) -{ - /*read power control register*/ - asm("mrc p15, 0, %0, c15, c0, 0" : "=r"(g_pwr_ctrl) : : "cc"); - /*read diagnostic register*/ - asm("mrc p15, 0, %0, c15, c0, 1" : "=r"(g_diag_reg) : : "cc"); - return; -} - -static void restore_cpu_arch_register(void) -{ - /*write power control register*/ - asm("mcr p15, 0, %0, c15, c0, 0" : : "r"(g_pwr_ctrl) : "cc"); - /*write diagnostic register*/ - asm("mcr p15, 0, %0, c15, c0, 1" : : "r"(g_diag_reg) : "cc"); - return; -} - -static int idle_finisher(unsigned long flags) -{ - cpu_do_idle(); - return 1; -} - -static int exynos4_enter_core0_aftr(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - unsigned long tmp; - - exynos4_set_wakeupmask(); - - /* Set value of power down register for aftr mode */ - exynos_sys_powerdown_conf(SYS_AFTR); - - __raw_writel(virt_to_phys(exynos_cpu_resume), REG_DIRECTGO_ADDR); - __raw_writel(S5P_CHECK_AFTR, REG_DIRECTGO_FLAG); - - save_cpu_arch_register(); - - /* Setting Central Sequence Register for power down mode */ - tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); - tmp &= ~S5P_CENTRAL_LOWPWR_CFG; - __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); - - cpu_pm_enter(); - cpu_suspend(0, idle_finisher); - -#ifdef CONFIG_SMP - if (!soc_is_exynos5250()) - scu_enable(S5P_VA_SCU); -#endif - cpu_pm_exit(); - - restore_cpu_arch_register(); - - /* - * If PMU failed while entering sleep mode, WFI will be - * ignored by PMU and then exiting cpu_do_idle(). - * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically - * in this situation. - */ - tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); - if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) { - tmp |= S5P_CENTRAL_LOWPWR_CFG; - __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); - } - - /* Clear wakeup state register */ - __raw_writel(0x0, S5P_WAKEUP_STAT); - - return index; -} - -static int exynos4_enter_lowpower(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - int new_index = index; - - /* AFTR can only be entered when cores other than CPU0 are offline */ - if (num_online_cpus() > 1 || dev->cpu != 0) - new_index = drv->safe_state_index; - - if (new_index == 0) - return arm_cpuidle_simple_enter(dev, drv, new_index); - else - return exynos4_enter_core0_aftr(dev, drv, new_index); -} - -static void __init exynos5_core_down_clk(void) -{ - unsigned int tmp; - - /* - * Enable arm clock down (in idle) and set arm divider - * ratios in WFI/WFE state. - */ - tmp = PWR_CTRL1_CORE2_DOWN_RATIO | \ - PWR_CTRL1_CORE1_DOWN_RATIO | \ - PWR_CTRL1_DIV2_DOWN_EN | \ - PWR_CTRL1_DIV1_DOWN_EN | \ - PWR_CTRL1_USE_CORE1_WFE | \ - PWR_CTRL1_USE_CORE0_WFE | \ - PWR_CTRL1_USE_CORE1_WFI | \ - PWR_CTRL1_USE_CORE0_WFI; - __raw_writel(tmp, EXYNOS5_PWR_CTRL1); - - /* - * Enable arm clock up (on exiting idle). Set arm divider - * ratios when not in idle along with the standby duration - * ratios. - */ - tmp = PWR_CTRL2_DIV2_UP_EN | \ - PWR_CTRL2_DIV1_UP_EN | \ - PWR_CTRL2_DUR_STANDBY2_VAL | \ - PWR_CTRL2_DUR_STANDBY1_VAL | \ - PWR_CTRL2_CORE2_UP_RATIO | \ - PWR_CTRL2_CORE1_UP_RATIO; - __raw_writel(tmp, EXYNOS5_PWR_CTRL2); -} - -static int exynos_cpuidle_probe(struct platform_device *pdev) -{ - int cpu_id, ret; - struct cpuidle_device *device; - - if (soc_is_exynos5250()) - exynos5_core_down_clk(); - - if (soc_is_exynos5440()) - exynos4_idle_driver.state_count = 1; - - ret = cpuidle_register_driver(&exynos4_idle_driver); - if (ret) { - dev_err(&pdev->dev, "failed to register cpuidle driver\n"); - return ret; - } - - for_each_online_cpu(cpu_id) { - device = &per_cpu(exynos4_cpuidle_device, cpu_id); - device->cpu = cpu_id; - - ret = cpuidle_register_device(device); - if (ret) { - dev_err(&pdev->dev, "failed to register cpuidle device\n"); - return ret; - } - } - - return 0; -} - -static struct platform_driver exynos_cpuidle_driver = { - .probe = exynos_cpuidle_probe, - .driver = { - .name = "exynos_cpuidle", - .owner = THIS_MODULE, - }, -}; - -module_platform_driver(exynos_cpuidle_driver); diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index b32a907d021d..7d9d8762b56e 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -114,51 +114,6 @@ static struct map_desc exynos4_iodesc[] __initdata = { }, }; -static struct map_desc exynos4_iodesc0[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos4_iodesc1[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos4210_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM_NS, - .pfn = __phys_to_pfn(EXYNOS4210_PA_SYSRAM_NS), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos4x12_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM_NS, - .pfn = __phys_to_pfn(EXYNOS4x12_PA_SYSRAM_NS), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos5250_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM_NS, - .pfn = __phys_to_pfn(EXYNOS5250_PA_SYSRAM_NS), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - static struct map_desc exynos5_iodesc[] __initdata = { { .virtual = (unsigned long)S3C_VA_SYS, @@ -181,11 +136,6 @@ static struct map_desc exynos5_iodesc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(EXYNOS5_PA_SYSRAM), - .length = SZ_4K, - .type = MT_DEVICE, - }, { .virtual = (unsigned long)S5P_VA_CMU, .pfn = __phys_to_pfn(EXYNOS5_PA_CMU), .length = 144 * SZ_1K, @@ -221,12 +171,16 @@ void exynos_restart(enum reboot_mode mode, const char *cmd) } static struct platform_device exynos_cpuidle = { - .name = "exynos_cpuidle", - .id = -1, + .name = "exynos_cpuidle", + .dev.platform_data = exynos_enter_aftr, + .id = -1, }; void __init exynos_cpuidle_init(void) { + if (soc_is_exynos5440()) + return; + platform_device_register(&exynos_cpuidle); } @@ -280,20 +234,6 @@ static void __init exynos_map_io(void) if (soc_is_exynos5()) iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc)); - - if (soc_is_exynos4210()) { - if (samsung_rev() == EXYNOS4210_REV_0) - iotable_init(exynos4_iodesc0, - ARRAY_SIZE(exynos4_iodesc0)); - else - iotable_init(exynos4_iodesc1, - ARRAY_SIZE(exynos4_iodesc1)); - iotable_init(exynos4210_iodesc, ARRAY_SIZE(exynos4210_iodesc)); - } - if (soc_is_exynos4212() || soc_is_exynos4412()) - iotable_init(exynos4x12_iodesc, ARRAY_SIZE(exynos4x12_iodesc)); - if (soc_is_exynos5250()) - iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc)); } void __init exynos_init_io(void) diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index 932129ef26c6..483dfcd69065 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -18,6 +18,7 @@ #include <mach/map.h> +#include "common.h" #include "smc.h" static int exynos_do_idle(void) @@ -34,7 +35,12 @@ static int exynos_cpu_boot(int cpu) static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr) { - void __iomem *boot_reg = S5P_VA_SYSRAM_NS + 0x1c + 4*cpu; + void __iomem *boot_reg; + + if (!sysram_ns_base_addr) + return -ENODEV; + + boot_reg = sysram_ns_base_addr + 0x1c + 4*cpu; __raw_writel(boot_addr, boot_reg); return 0; diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c index 5eead530c6f8..609c99ca59c4 100644 --- a/arch/arm/mach-exynos/hotplug.c +++ b/arch/arm/mach-exynos/hotplug.c @@ -96,7 +96,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) /* make cpu1 to be turned off at next WFI command */ if (cpu == 1) - __raw_writel(0, S5P_ARM_CORE1_CONFIGURATION); + exynos_cpu_power_down(cpu); /* * here's the WFI diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 7b046b59d9ec..548269a60634 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -23,13 +23,6 @@ #include <plat/map-s5p.h> -#define EXYNOS4_PA_SYSRAM0 0x02025000 -#define EXYNOS4_PA_SYSRAM1 0x02020000 -#define EXYNOS5_PA_SYSRAM 0x02020000 -#define EXYNOS4210_PA_SYSRAM_NS 0x0203F000 -#define EXYNOS4x12_PA_SYSRAM_NS 0x0204F000 -#define EXYNOS5250_PA_SYSRAM_NS 0x0204F000 - #define EXYNOS_PA_CHIPID 0x10000000 #define EXYNOS4_PA_SYSCON 0x10010000 diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c new file mode 100644 index 000000000000..1ac618ce440b --- /dev/null +++ b/arch/arm/mach-exynos/mcpm-exynos.c @@ -0,0 +1,351 @@ +/* + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * arch/arm/mach-exynos/mcpm-exynos.c + * + * Based on arch/arm/mach-vexpress/dcscb.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/arm-cci.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/of_address.h> + +#include <asm/cputype.h> +#include <asm/cp15.h> +#include <asm/mcpm.h> + +#include "regs-pmu.h" +#include "common.h" + +#define EXYNOS5420_CPUS_PER_CLUSTER 4 +#define EXYNOS5420_NR_CLUSTERS 2 +#define MCPM_BOOT_ADDR_OFFSET 0x1c + +/* + * The common v7_exit_coherency_flush API could not be used because of the + * Erratum 799270 workaround. This macro is the same as the common one (in + * arch/arm/include/asm/cacheflush.h) except for the erratum handling. + */ +#define exynos_v7_exit_coherency_flush(level) \ + asm volatile( \ + "stmfd sp!, {fp, ip}\n\t"\ + "mrc p15, 0, r0, c1, c0, 0 @ get SCTLR\n\t" \ + "bic r0, r0, #"__stringify(CR_C)"\n\t" \ + "mcr p15, 0, r0, c1, c0, 0 @ set SCTLR\n\t" \ + "isb\n\t"\ + "bl v7_flush_dcache_"__stringify(level)"\n\t" \ + "clrex\n\t"\ + "mrc p15, 0, r0, c1, c0, 1 @ get ACTLR\n\t" \ + "bic r0, r0, #(1 << 6) @ disable local coherency\n\t" \ + /* Dummy Load of a device register to avoid Erratum 799270 */ \ + "ldr r4, [%0]\n\t" \ + "and r4, r4, #0\n\t" \ + "orr r0, r0, r4\n\t" \ + "mcr p15, 0, r0, c1, c0, 1 @ set ACTLR\n\t" \ + "isb\n\t" \ + "dsb\n\t" \ + "ldmfd sp!, {fp, ip}" \ + : \ + : "Ir" (S5P_INFORM0) \ + : "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \ + "r9", "r10", "lr", "memory") + +/* + * We can't use regular spinlocks. In the switcher case, it is possible + * for an outbound CPU to call power_down() after its inbound counterpart + * is already live using the same logical CPU number which trips lockdep + * debugging. + */ +static arch_spinlock_t exynos_mcpm_lock = __ARCH_SPIN_LOCK_UNLOCKED; +static int +cpu_use_count[EXYNOS5420_CPUS_PER_CLUSTER][EXYNOS5420_NR_CLUSTERS]; + +#define exynos_cluster_usecnt(cluster) \ + (cpu_use_count[0][cluster] + \ + cpu_use_count[1][cluster] + \ + cpu_use_count[2][cluster] + \ + cpu_use_count[3][cluster]) + +#define exynos_cluster_unused(cluster) !exynos_cluster_usecnt(cluster) + +static int exynos_cluster_power_control(unsigned int cluster, int enable) +{ + unsigned int tries = 100; + unsigned int val; + + if (enable) { + exynos_cluster_power_up(cluster); + val = S5P_CORE_LOCAL_PWR_EN; + } else { + exynos_cluster_power_down(cluster); + val = 0; + } + + /* Wait until cluster power control is applied */ + while (tries--) { + if (exynos_cluster_power_state(cluster) == val) + return 0; + + cpu_relax(); + } + pr_debug("timed out waiting for cluster %u to power %s\n", cluster, + enable ? "on" : "off"); + + return -ETIMEDOUT; +} + +static int exynos_power_up(unsigned int cpu, unsigned int cluster) +{ + unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER); + int err = 0; + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + if (cpu >= EXYNOS5420_CPUS_PER_CLUSTER || + cluster >= EXYNOS5420_NR_CLUSTERS) + return -EINVAL; + + /* + * Since this is called with IRQs enabled, and no arch_spin_lock_irq + * variant exists, we need to disable IRQs manually here. + */ + local_irq_disable(); + arch_spin_lock(&exynos_mcpm_lock); + + cpu_use_count[cpu][cluster]++; + if (cpu_use_count[cpu][cluster] == 1) { + bool was_cluster_down = + (exynos_cluster_usecnt(cluster) == 1); + + /* + * Turn on the cluster (L2/COMMON) and then power on the + * cores. + */ + if (was_cluster_down) + err = exynos_cluster_power_control(cluster, 1); + + if (!err) + exynos_cpu_power_up(cpunr); + else + exynos_cluster_power_control(cluster, 0); + } else if (cpu_use_count[cpu][cluster] != 2) { + /* + * The only possible values are: + * 0 = CPU down + * 1 = CPU (still) up + * 2 = CPU requested to be up before it had a chance + * to actually make itself down. + * Any other value is a bug. + */ + BUG(); + } + + arch_spin_unlock(&exynos_mcpm_lock); + local_irq_enable(); + + return err; +} + +/* + * NOTE: This function requires the stack data to be visible through power down + * and can only be executed on processors like A15 and A7 that hit the cache + * with the C bit clear in the SCTLR register. + */ +static void exynos_power_down(void) +{ + unsigned int mpidr, cpu, cluster; + bool last_man = false, skip_wfi = false; + unsigned int cpunr; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER); + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER || + cluster >= EXYNOS5420_NR_CLUSTERS); + + __mcpm_cpu_going_down(cpu, cluster); + + arch_spin_lock(&exynos_mcpm_lock); + BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP); + cpu_use_count[cpu][cluster]--; + if (cpu_use_count[cpu][cluster] == 0) { + exynos_cpu_power_down(cpunr); + + if (exynos_cluster_unused(cluster)) + /* TODO: Turn off the cluster here to save power. */ + last_man = true; + } else if (cpu_use_count[cpu][cluster] == 1) { + /* + * A power_up request went ahead of us. + * Even if we do not want to shut this CPU down, + * the caller expects a certain state as if the WFI + * was aborted. So let's continue with cache cleaning. + */ + skip_wfi = true; + } else { + BUG(); + } + + if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) { + arch_spin_unlock(&exynos_mcpm_lock); + + if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A15) { + /* + * On the Cortex-A15 we need to disable + * L2 prefetching before flushing the cache. + */ + asm volatile( + "mcr p15, 1, %0, c15, c0, 3\n\t" + "isb\n\t" + "dsb" + : : "r" (0x400)); + } + + /* Flush all cache levels for this cluster. */ + exynos_v7_exit_coherency_flush(all); + + /* + * Disable cluster-level coherency by masking + * incoming snoops and DVM messages: + */ + cci_disable_port_by_cpu(mpidr); + + __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN); + } else { + arch_spin_unlock(&exynos_mcpm_lock); + + /* Disable and flush the local CPU cache. */ + exynos_v7_exit_coherency_flush(louis); + } + + __mcpm_cpu_down(cpu, cluster); + + /* Now we are prepared for power-down, do it: */ + if (!skip_wfi) + wfi(); + + /* Not dead at this point? Let our caller cope. */ +} + +static int exynos_power_down_finish(unsigned int cpu, unsigned int cluster) +{ + unsigned int tries = 100; + unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER); + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER || + cluster >= EXYNOS5420_NR_CLUSTERS); + + /* Wait for the core state to be OFF */ + while (tries--) { + if (ACCESS_ONCE(cpu_use_count[cpu][cluster]) == 0) { + if ((exynos_cpu_power_state(cpunr) == 0)) + return 0; /* success: the CPU is halted */ + } + + /* Otherwise, wait and retry: */ + msleep(1); + } + + return -ETIMEDOUT; /* timeout */ +} + +static const struct mcpm_platform_ops exynos_power_ops = { + .power_up = exynos_power_up, + .power_down = exynos_power_down, + .power_down_finish = exynos_power_down_finish, +}; + +static void __init exynos_mcpm_usage_count_init(void) +{ + unsigned int mpidr, cpu, cluster; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER || + cluster >= EXYNOS5420_NR_CLUSTERS); + + cpu_use_count[cpu][cluster] = 1; +} + +/* + * Enable cluster-level coherency, in preparation for turning on the MMU. + */ +static void __naked exynos_pm_power_up_setup(unsigned int affinity_level) +{ + asm volatile ("\n" + "cmp r0, #1\n" + "bxne lr\n" + "b cci_enable_port_for_self"); +} + +static int __init exynos_mcpm_init(void) +{ + struct device_node *node; + void __iomem *ns_sram_base_addr; + int ret; + + node = of_find_compatible_node(NULL, NULL, "samsung,exynos5420"); + if (!node) + return -ENODEV; + of_node_put(node); + + if (!cci_probed()) + return -ENODEV; + + node = of_find_compatible_node(NULL, NULL, + "samsung,exynos4210-sysram-ns"); + if (!node) + return -ENODEV; + + ns_sram_base_addr = of_iomap(node, 0); + of_node_put(node); + if (!ns_sram_base_addr) { + pr_err("failed to map non-secure iRAM base address\n"); + return -ENOMEM; + } + + /* + * To increase the stability of KFC reset we need to program + * the PMU SPARE3 register + */ + __raw_writel(EXYNOS5420_SWRESET_KFC_SEL, S5P_PMU_SPARE3); + + exynos_mcpm_usage_count_init(); + + ret = mcpm_platform_register(&exynos_power_ops); + if (!ret) + ret = mcpm_sync_init(exynos_pm_power_up_setup); + if (ret) { + iounmap(ns_sram_base_addr); + return ret; + } + + mcpm_smp_set_ops(); + + pr_info("Exynos MCPM support installed\n"); + + /* + * Future entries into the kernel can now go + * through the cluster entry vectors. + */ + __raw_writel(virt_to_phys(mcpm_entry_point), + ns_sram_base_addr + MCPM_BOOT_ADDR_OFFSET); + + iounmap(ns_sram_base_addr); + + return ret; +} + +early_initcall(exynos_mcpm_init); diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 03e5e9f94705..9e5e230575dd 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -20,6 +20,7 @@ #include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> +#include <linux/of_address.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> @@ -33,11 +34,33 @@ extern void exynos4_secondary_startup(void); +void __iomem *sysram_base_addr; +void __iomem *sysram_ns_base_addr; + +static void __init exynos_smp_prepare_sysram(void) +{ + struct device_node *node; + + for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram") { + if (!of_device_is_available(node)) + continue; + sysram_base_addr = of_iomap(node, 0); + break; + } + + for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram-ns") { + if (!of_device_is_available(node)) + continue; + sysram_ns_base_addr = of_iomap(node, 0); + break; + } +} + static inline void __iomem *cpu_boot_reg_base(void) { if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1) return S5P_INFORM5; - return S5P_VA_SYSRAM; + return sysram_base_addr; } static inline void __iomem *cpu_boot_reg(int cpu) @@ -45,6 +68,8 @@ static inline void __iomem *cpu_boot_reg(int cpu) void __iomem *boot_reg; boot_reg = cpu_boot_reg_base(); + if (!boot_reg) + return ERR_PTR(-ENODEV); if (soc_is_exynos4412()) boot_reg += 4*cpu; else if (soc_is_exynos5420()) @@ -90,6 +115,7 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; unsigned long phys_cpu = cpu_logical_map(cpu); + int ret = -ENOSYS; /* * Set synchronisation state between this boot processor @@ -107,15 +133,12 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) */ write_pen_release(phys_cpu); - if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) { - __raw_writel(S5P_CORE_LOCAL_PWR_EN, - S5P_ARM_CORE1_CONFIGURATION); - + if (!exynos_cpu_power_state(cpu)) { + exynos_cpu_power_up(cpu); timeout = 10; /* wait max 10 ms until cpu1 is on */ - while ((__raw_readl(S5P_ARM_CORE1_STATUS) - & S5P_CORE_LOCAL_PWR_EN) != S5P_CORE_LOCAL_PWR_EN) { + while (exynos_cpu_power_state(cpu) != S5P_CORE_LOCAL_PWR_EN) { if (timeout-- == 0) break; @@ -146,8 +169,18 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) * Try to set boot address using firmware first * and fall back to boot register if it fails. */ - if (call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr)) + ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr); + if (ret && ret != -ENOSYS) + goto fail; + if (ret == -ENOSYS) { + void __iomem *boot_reg = cpu_boot_reg(phys_cpu); + + if (IS_ERR(boot_reg)) { + ret = PTR_ERR(boot_reg); + goto fail; + } __raw_writel(boot_addr, cpu_boot_reg(phys_cpu)); + } call_firmware_op(cpu_boot, phys_cpu); @@ -163,9 +196,10 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) * now the secondary core is starting up let it run its * calibrations, then wait for it to finish */ +fail: spin_unlock(&boot_lock); - return pen_release != -1 ? -ENOSYS : 0; + return pen_release != -1 ? ret : 0; } /* @@ -205,6 +239,8 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) scu_enable(scu_base_addr()); + exynos_smp_prepare_sysram(); + /* * Write the address of secondary startup into the * system-wide flags register. The boot monitor waits @@ -217,12 +253,21 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) for (i = 1; i < max_cpus; ++i) { unsigned long phys_cpu; unsigned long boot_addr; + int ret; phys_cpu = cpu_logical_map(i); boot_addr = virt_to_phys(exynos4_secondary_startup); - if (call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr)) + ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr); + if (ret && ret != -ENOSYS) + break; + if (ret == -ENOSYS) { + void __iomem *boot_reg = cpu_boot_reg(phys_cpu); + + if (IS_ERR(boot_reg)) + break; __raw_writel(boot_addr, cpu_boot_reg(phys_cpu)); + } } } diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index 15af0ceb0a66..0d1a46e7b021 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/suspend.h> #include <linux/syscore_ops.h> +#include <linux/cpu_pm.h> #include <linux/io.h> #include <linux/irqchip/arm-gic.h> #include <linux/err.h> @@ -100,9 +101,141 @@ static int exynos_irq_set_wake(struct irq_data *data, unsigned int state) return -ENOENT; } +/** + * exynos_core_power_down : power down the specified cpu + * @cpu : the cpu to power down + * + * Power down the specified cpu. The sequence must be finished by a + * call to cpu_do_idle() + * + */ +void exynos_cpu_power_down(int cpu) +{ + __raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu)); +} + +/** + * exynos_cpu_power_up : power up the specified cpu + * @cpu : the cpu to power up + * + * Power up the specified cpu + */ +void exynos_cpu_power_up(int cpu) +{ + __raw_writel(S5P_CORE_LOCAL_PWR_EN, + EXYNOS_ARM_CORE_CONFIGURATION(cpu)); +} + +/** + * exynos_cpu_power_state : returns the power state of the cpu + * @cpu : the cpu to retrieve the power state from + * + */ +int exynos_cpu_power_state(int cpu) +{ + return (__raw_readl(EXYNOS_ARM_CORE_STATUS(cpu)) & + S5P_CORE_LOCAL_PWR_EN); +} + +/** + * exynos_cluster_power_down : power down the specified cluster + * @cluster : the cluster to power down + */ +void exynos_cluster_power_down(int cluster) +{ + __raw_writel(0, EXYNOS_COMMON_CONFIGURATION(cluster)); +} + +/** + * exynos_cluster_power_up : power up the specified cluster + * @cluster : the cluster to power up + */ +void exynos_cluster_power_up(int cluster) +{ + __raw_writel(S5P_CORE_LOCAL_PWR_EN, + EXYNOS_COMMON_CONFIGURATION(cluster)); +} + +/** + * exynos_cluster_power_state : returns the power state of the cluster + * @cluster : the cluster to retrieve the power state from + * + */ +int exynos_cluster_power_state(int cluster) +{ + return (__raw_readl(EXYNOS_COMMON_STATUS(cluster)) & + S5P_CORE_LOCAL_PWR_EN); +} + +#define EXYNOS_BOOT_VECTOR_ADDR (samsung_rev() == EXYNOS4210_REV_1_1 ? \ + S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \ + (sysram_base_addr + 0x24) : S5P_INFORM0)) +#define EXYNOS_BOOT_VECTOR_FLAG (samsung_rev() == EXYNOS4210_REV_1_1 ? \ + S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \ + (sysram_base_addr + 0x20) : S5P_INFORM1)) + +#define S5P_CHECK_AFTR 0xFCBA0D10 +#define S5P_CHECK_SLEEP 0x00000BAD + +/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */ +static void exynos_set_wakeupmask(long mask) +{ + __raw_writel(mask, S5P_WAKEUP_MASK); +} + +static void exynos_cpu_set_boot_vector(long flags) +{ + __raw_writel(virt_to_phys(exynos_cpu_resume), EXYNOS_BOOT_VECTOR_ADDR); + __raw_writel(flags, EXYNOS_BOOT_VECTOR_FLAG); +} + +void exynos_enter_aftr(void) +{ + exynos_set_wakeupmask(0x0000ff3e); + exynos_cpu_set_boot_vector(S5P_CHECK_AFTR); + /* Set value of power down register for aftr mode */ + exynos_sys_powerdown_conf(SYS_AFTR); +} + /* For Cortex-A9 Diagnostic and Power control register */ static unsigned int save_arm_register[2]; +static void exynos_cpu_save_register(void) +{ + unsigned long tmp; + + /* Save Power control register */ + asm ("mrc p15, 0, %0, c15, c0, 0" + : "=r" (tmp) : : "cc"); + + save_arm_register[0] = tmp; + + /* Save Diagnostic register */ + asm ("mrc p15, 0, %0, c15, c0, 1" + : "=r" (tmp) : : "cc"); + + save_arm_register[1] = tmp; +} + +static void exynos_cpu_restore_register(void) +{ + unsigned long tmp; + + /* Restore Power control register */ + tmp = save_arm_register[0]; + + asm volatile ("mcr p15, 0, %0, c15, c0, 0" + : : "r" (tmp) + : "cc"); + + /* Restore Diagnostic register */ + tmp = save_arm_register[1]; + + asm volatile ("mcr p15, 0, %0, c15, c0, 1" + : : "r" (tmp) + : "cc"); +} + static int exynos_cpu_suspend(unsigned long arg) { #ifdef CONFIG_CACHE_L2X0 @@ -147,37 +280,34 @@ static void exynos_pm_prepare(void) __raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0); } -static int exynos_pm_suspend(void) +static void exynos_pm_central_suspend(void) { unsigned long tmp; /* Setting Central Sequence Register for power down mode */ - tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); tmp &= ~S5P_CENTRAL_LOWPWR_CFG; __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); +} + +static int exynos_pm_suspend(void) +{ + unsigned long tmp; + + exynos_pm_central_suspend(); /* Setting SEQ_OPTION register */ tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0); __raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION); - if (!soc_is_exynos5250()) { - /* Save Power control register */ - asm ("mrc p15, 0, %0, c15, c0, 0" - : "=r" (tmp) : : "cc"); - save_arm_register[0] = tmp; - - /* Save Diagnostic register */ - asm ("mrc p15, 0, %0, c15, c0, 1" - : "=r" (tmp) : : "cc"); - save_arm_register[1] = tmp; - } + if (!soc_is_exynos5250()) + exynos_cpu_save_register(); return 0; } -static void exynos_pm_resume(void) +static int exynos_pm_central_resume(void) { unsigned long tmp; @@ -194,22 +324,20 @@ static void exynos_pm_resume(void) /* clear the wakeup state register */ __raw_writel(0x0, S5P_WAKEUP_STAT); /* No need to perform below restore code */ - goto early_wakeup; - } - if (!soc_is_exynos5250()) { - /* Restore Power control register */ - tmp = save_arm_register[0]; - asm volatile ("mcr p15, 0, %0, c15, c0, 0" - : : "r" (tmp) - : "cc"); - - /* Restore Diagnostic register */ - tmp = save_arm_register[1]; - asm volatile ("mcr p15, 0, %0, c15, c0, 1" - : : "r" (tmp) - : "cc"); + return -1; } + return 0; +} + +static void exynos_pm_resume(void) +{ + if (exynos_pm_central_resume()) + goto early_wakeup; + + if (!soc_is_exynos5250()) + exynos_cpu_restore_register(); + /* For release retention */ __raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION); @@ -226,7 +354,7 @@ static void exynos_pm_resume(void) s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save)); - if (IS_ENABLED(CONFIG_SMP) && !soc_is_exynos5250()) + if (!soc_is_exynos5250()) scu_enable(S5P_VA_SCU); early_wakeup: @@ -304,10 +432,42 @@ static const struct platform_suspend_ops exynos_suspend_ops = { .valid = suspend_valid_only_mem, }; +static int exynos_cpu_pm_notifier(struct notifier_block *self, + unsigned long cmd, void *v) +{ + int cpu = smp_processor_id(); + + switch (cmd) { + case CPU_PM_ENTER: + if (cpu == 0) { + exynos_pm_central_suspend(); + exynos_cpu_save_register(); + } + break; + + case CPU_PM_EXIT: + if (cpu == 0) { + if (!soc_is_exynos5250()) + scu_enable(S5P_VA_SCU); + exynos_cpu_restore_register(); + exynos_pm_central_resume(); + } + break; + } + + return NOTIFY_OK; +} + +static struct notifier_block exynos_cpu_pm_notifier_block = { + .notifier_call = exynos_cpu_pm_notifier, +}; + void __init exynos_pm_init(void) { u32 tmp; + cpu_pm_register_notifier(&exynos_cpu_pm_notifier_block); + /* Platform-specific GIC callback */ gic_arch_extn.irq_set_wake = exynos_irq_set_wake; diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h index 4f6a2560d022..1d13b08708f0 100644 --- a/arch/arm/mach-exynos/regs-pmu.h +++ b/arch/arm/mach-exynos/regs-pmu.h @@ -38,6 +38,7 @@ #define S5P_INFORM5 S5P_PMUREG(0x0814) #define S5P_INFORM6 S5P_PMUREG(0x0818) #define S5P_INFORM7 S5P_PMUREG(0x081C) +#define S5P_PMU_SPARE3 S5P_PMUREG(0x090C) #define S5P_ARM_CORE0_LOWPWR S5P_PMUREG(0x1000) #define S5P_DIS_IRQ_CORE0 S5P_PMUREG(0x1004) @@ -105,8 +106,17 @@ #define S5P_GPS_LOWPWR S5P_PMUREG(0x139C) #define S5P_GPS_ALIVE_LOWPWR S5P_PMUREG(0x13A0) -#define S5P_ARM_CORE1_CONFIGURATION S5P_PMUREG(0x2080) -#define S5P_ARM_CORE1_STATUS S5P_PMUREG(0x2084) +#define EXYNOS_ARM_CORE0_CONFIGURATION S5P_PMUREG(0x2000) +#define EXYNOS_ARM_CORE_CONFIGURATION(_nr) \ + (EXYNOS_ARM_CORE0_CONFIGURATION + (0x80 * (_nr))) +#define EXYNOS_ARM_CORE_STATUS(_nr) \ + (EXYNOS_ARM_CORE_CONFIGURATION(_nr) + 0x4) + +#define EXYNOS_ARM_COMMON_CONFIGURATION S5P_PMUREG(0x2500) +#define EXYNOS_COMMON_CONFIGURATION(_nr) \ + (EXYNOS_ARM_COMMON_CONFIGURATION + (0x80 * (_nr))) +#define EXYNOS_COMMON_STATUS(_nr) \ + (EXYNOS_COMMON_CONFIGURATION(_nr) + 0x4) #define S5P_PAD_RET_MAUDIO_OPTION S5P_PMUREG(0x3028) #define S5P_PAD_RET_GPIO_OPTION S5P_PMUREG(0x3108) @@ -119,8 +129,6 @@ #define S5P_CORE_LOCAL_PWR_EN 0x3 #define S5P_INT_LOCAL_PWR_EN 0x7 -#define S5P_CHECK_SLEEP 0x00000BAD - /* Only for EXYNOS4210 */ #define S5P_CMU_CLKSTOP_LCD1_LOWPWR S5P_PMUREG(0x1154) #define S5P_CMU_RESET_LCD1_LOWPWR S5P_PMUREG(0x1174) @@ -313,4 +321,6 @@ #define EXYNOS5_OPTION_USE_RETENTION (1 << 4) +#define EXYNOS5420_SWRESET_KFC_SEL 0x3 + #endif /* __ASM_ARCH_REGS_PMU_H */ diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 40cf50b9940c..1e52b6926374 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -18,6 +18,8 @@ config PLAT_S3C24XX help Base platform code for any Samsung S3C24XX device + + menu "SAMSUNG S3C24XX SoCs Support" comment "S3C24XX SoCs" @@ -27,7 +29,7 @@ config CPU_S3C2410 default y select CPU_ARM920T select CPU_LLSERIAL_S3C2410 - select S3C2410_CLOCK + select S3C2410_COMMON_CLK select S3C2410_DMA if S3C24XX_DMA select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ select S3C2410_PM if PM @@ -40,6 +42,7 @@ config CPU_S3C2412 bool "SAMSUNG S3C2412" select CPU_ARM926T select CPU_LLSERIAL_S3C2440 + select S3C2412_COMMON_CLK select S3C2412_DMA if S3C24XX_DMA select S3C2412_PM if PM help @@ -50,9 +53,8 @@ config CPU_S3C2416 select CPU_ARM926T select CPU_LLSERIAL_S3C2440 select S3C2416_PM if PM - select S3C2443_COMMON + select S3C2443_COMMON_CLK select S3C2443_DMA if S3C24XX_DMA - select SAMSUNG_CLKSRC help Support for the S3C2416 SoC from the S3C24XX line @@ -60,7 +62,7 @@ config CPU_S3C2440 bool "SAMSUNG S3C2440" select CPU_ARM920T select CPU_LLSERIAL_S3C2440 - select S3C2410_CLOCK + select S3C2410_COMMON_CLK select S3C2410_PM if PM select S3C2440_DMA if S3C24XX_DMA help @@ -70,7 +72,7 @@ config CPU_S3C2442 bool "SAMSUNG S3C2442" select CPU_ARM920T select CPU_LLSERIAL_S3C2440 - select S3C2410_CLOCK + select S3C2410_COMMON_CLK select S3C2410_DMA if S3C24XX_DMA select S3C2410_PM if PM help @@ -85,25 +87,13 @@ config CPU_S3C2443 bool "SAMSUNG S3C2443" select CPU_ARM920T select CPU_LLSERIAL_S3C2440 - select S3C2443_COMMON + select S3C2443_COMMON_CLK select S3C2443_DMA if S3C24XX_DMA - select SAMSUNG_CLKSRC help Support for the S3C2443 SoC from the S3C24XX line # common code -config S3C2410_CLOCK - bool - help - Clock code for the S3C2410, and similar processors which - is currently includes the S3C2410, S3C2440, S3C2442. - -config S3C24XX_DCLK - bool - help - Clock code for supporting DCLK/CLKOUT on S3C24XX architectures - config S3C24XX_SMDK bool help @@ -258,8 +248,8 @@ config ARCH_BAST bool "Simtec Electronics BAST (EB2410ITX)" select ISA select MACH_BAST_IDE + select S3C2410_COMMON_DCLK select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ - select S3C24XX_DCLK select S3C24XX_SIMTEC_NOR select S3C24XX_SIMTEC_PM if PM select S3C24XX_SIMTEC_USB @@ -340,7 +330,7 @@ config MACH_TCT_HAMMER config MACH_VR1000 bool "Thorcom VR1000" select MACH_BAST_IDE - select S3C24XX_DCLK + select S3C2410_COMMON_DCLK select S3C24XX_SIMTEC_NOR select S3C24XX_SIMTEC_PM if PM select S3C24XX_SIMTEC_USB @@ -519,8 +509,8 @@ comment "S3C2440 Boards" config MACH_ANUBIS bool "Simtec Electronics ANUBIS" select HAVE_PATA_PLATFORM + select S3C2410_COMMON_DCLK select S3C2440_XTAL_12000000 - select S3C24XX_DCLK select S3C24XX_SIMTEC_PM if PM select S3C_DEV_USB_HOST help @@ -558,9 +548,9 @@ config MACH_NEXCODER_2440 config MACH_OSIRIS bool "Simtec IM2440D20 (OSIRIS) module" + select S3C2410_COMMON_DCLK select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2440_XTAL_12000000 - select S3C24XX_DCLK select S3C24XX_SIMTEC_PM if PM select S3C_DEV_NAND select S3C_DEV_USB_HOST @@ -629,9 +619,9 @@ config MACH_RX1950 bool "HP iPAQ rx1950" select I2C select PM_H1940 if PM + select S3C2410_COMMON_DCLK select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2440_XTAL_16934400 - select S3C24XX_DCLK select S3C24XX_PWM select S3C_DEV_NAND help @@ -641,12 +631,6 @@ endif # CPU_S3C2442 if CPU_S3C2443 || CPU_S3C2416 -config S3C2443_COMMON - bool - help - Common code for the S3C2443 and similar processors, which includes - the S3C2416 and S3C2450. - config S3C2443_DMA bool help diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index 7f54e5b954ca..2235d0d3b38d 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -21,22 +21,22 @@ obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o -obj-$(CONFIG_CPU_S3C2412) += s3c2412.o clock-s3c2412.o +obj-$(CONFIG_CPU_S3C2412) += s3c2412.o obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o -obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock-s3c2416.o +obj-$(CONFIG_CPU_S3C2416) += s3c2416.o obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o -obj-$(CONFIG_CPU_S3C2440) += s3c2440.o clock-s3c2440.o +obj-$(CONFIG_CPU_S3C2440) += s3c2440.o obj-$(CONFIG_CPU_S3C2442) += s3c2442.o -obj-$(CONFIG_CPU_S3C244X) += s3c244x.o clock-s3c244x.o +obj-$(CONFIG_CPU_S3C244X) += s3c244x.o obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o -obj-$(CONFIG_CPU_S3C2443) += s3c2443.o clock-s3c2443.o +obj-$(CONFIG_CPU_S3C2443) += s3c2443.o # PM @@ -44,16 +44,13 @@ obj-$(CONFIG_PM) += pm.o irq-pm.o sleep.o # common code -obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o obj-$(CONFIG_S3C24XX_DMA) += dma.o -obj-$(CONFIG_S3C2410_CLOCK) += clock-s3c2410.o obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += cpufreq-utils.o obj-$(CONFIG_S3C2410_IOTIMING) += iotiming-s3c2410.o obj-$(CONFIG_S3C2412_IOTIMING) += iotiming-s3c2412.o -obj-$(CONFIG_S3C2443_COMMON) += common-s3c2443.o obj-$(CONFIG_S3C2443_DMA) += dma-s3c2443.o # diff --git a/arch/arm/mach-s3c24xx/clock-dclk.c b/arch/arm/mach-s3c24xx/clock-dclk.c deleted file mode 100644 index 1edd9b2369c5..000000000000 --- a/arch/arm/mach-s3c24xx/clock-dclk.c +++ /dev/null @@ -1,195 +0,0 @@ -/* - * Copyright (c) 2004-2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C24XX - definitions for DCLK and CLKOUT registers - */ - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <mach/regs-clock.h> -#include <mach/regs-gpio.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -/* clocks that could be registered by external code */ - -static int s3c24xx_dclk_enable(struct clk *clk, int enable) -{ - unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON); - - if (enable) - dclkcon |= clk->ctrlbit; - else - dclkcon &= ~clk->ctrlbit; - - __raw_writel(dclkcon, S3C24XX_DCLKCON); - - return 0; -} - -static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent) -{ - unsigned long dclkcon; - unsigned int uclk; - - if (parent == &clk_upll) - uclk = 1; - else if (parent == &clk_p) - uclk = 0; - else - return -EINVAL; - - clk->parent = parent; - - dclkcon = __raw_readl(S3C24XX_DCLKCON); - - if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) { - if (uclk) - dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK; - else - dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK; - } else { - if (uclk) - dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK; - else - dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK; - } - - __raw_writel(dclkcon, S3C24XX_DCLKCON); - - return 0; -} -static unsigned long s3c24xx_calc_div(struct clk *clk, unsigned long rate) -{ - unsigned long div; - - if ((rate == 0) || !clk->parent) - return 0; - - div = clk_get_rate(clk->parent) / rate; - if (div < 2) - div = 2; - else if (div > 16) - div = 16; - - return div; -} - -static unsigned long s3c24xx_round_dclk_rate(struct clk *clk, - unsigned long rate) -{ - unsigned long div = s3c24xx_calc_div(clk, rate); - - if (div == 0) - return 0; - - return clk_get_rate(clk->parent) / div; -} - -static int s3c24xx_set_dclk_rate(struct clk *clk, unsigned long rate) -{ - unsigned long mask, data, div = s3c24xx_calc_div(clk, rate); - - if (div == 0) - return -EINVAL; - - if (clk == &s3c24xx_dclk0) { - mask = S3C2410_DCLKCON_DCLK0_DIV_MASK | - S3C2410_DCLKCON_DCLK0_CMP_MASK; - data = S3C2410_DCLKCON_DCLK0_DIV(div) | - S3C2410_DCLKCON_DCLK0_CMP((div + 1) / 2); - } else if (clk == &s3c24xx_dclk1) { - mask = S3C2410_DCLKCON_DCLK1_DIV_MASK | - S3C2410_DCLKCON_DCLK1_CMP_MASK; - data = S3C2410_DCLKCON_DCLK1_DIV(div) | - S3C2410_DCLKCON_DCLK1_CMP((div + 1) / 2); - } else - return -EINVAL; - - clk->rate = clk_get_rate(clk->parent) / div; - __raw_writel(((__raw_readl(S3C24XX_DCLKCON) & ~mask) | data), - S3C24XX_DCLKCON); - return clk->rate; -} -static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent) -{ - unsigned long mask; - unsigned long source; - - /* calculate the MISCCR setting for the clock */ - - if (parent == &clk_mpll) - source = S3C2410_MISCCR_CLK0_MPLL; - else if (parent == &clk_upll) - source = S3C2410_MISCCR_CLK0_UPLL; - else if (parent == &clk_f) - source = S3C2410_MISCCR_CLK0_FCLK; - else if (parent == &clk_h) - source = S3C2410_MISCCR_CLK0_HCLK; - else if (parent == &clk_p) - source = S3C2410_MISCCR_CLK0_PCLK; - else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0) - source = S3C2410_MISCCR_CLK0_DCLK0; - else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1) - source = S3C2410_MISCCR_CLK0_DCLK0; - else - return -EINVAL; - - clk->parent = parent; - - if (clk == &s3c24xx_clkout0) - mask = S3C2410_MISCCR_CLK0_MASK; - else { - source <<= 4; - mask = S3C2410_MISCCR_CLK1_MASK; - } - - s3c2410_modify_misccr(mask, source); - return 0; -} - -/* external clock definitions */ - -static struct clk_ops dclk_ops = { - .set_parent = s3c24xx_dclk_setparent, - .set_rate = s3c24xx_set_dclk_rate, - .round_rate = s3c24xx_round_dclk_rate, -}; - -struct clk s3c24xx_dclk0 = { - .name = "dclk0", - .ctrlbit = S3C2410_DCLKCON_DCLK0EN, - .enable = s3c24xx_dclk_enable, - .ops = &dclk_ops, -}; - -struct clk s3c24xx_dclk1 = { - .name = "dclk1", - .ctrlbit = S3C2410_DCLKCON_DCLK1EN, - .enable = s3c24xx_dclk_enable, - .ops = &dclk_ops, -}; - -static struct clk_ops clkout_ops = { - .set_parent = s3c24xx_clkout_setparent, -}; - -struct clk s3c24xx_clkout0 = { - .name = "clkout0", - .ops = &clkout_ops, -}; - -struct clk s3c24xx_clkout1 = { - .name = "clkout1", - .ops = &clkout_ops, -}; diff --git a/arch/arm/mach-s3c24xx/clock-s3c2410.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c deleted file mode 100644 index d1afcf9252d1..000000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2410.c +++ /dev/null @@ -1,284 +0,0 @@ -/* - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410,S3C2440,S3C2442 Clock control support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/delay.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/io.h> - -#include <asm/mach/map.h> - -#include <mach/hardware.h> -#include <mach/regs-clock.h> -#include <mach/regs-gpio.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -int s3c2410_clkcon_enable(struct clk *clk, int enable) -{ - unsigned int clocks = clk->ctrlbit; - unsigned long clkcon; - - clkcon = __raw_readl(S3C2410_CLKCON); - - if (enable) - clkcon |= clocks; - else - clkcon &= ~clocks; - - /* ensure none of the special function bits set */ - clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER); - - __raw_writel(clkcon, S3C2410_CLKCON); - - return 0; -} - -static int s3c2410_upll_enable(struct clk *clk, int enable) -{ - unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); - unsigned long orig = clkslow; - - if (enable) - clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF; - else - clkslow |= S3C2410_CLKSLOW_UCLK_OFF; - - __raw_writel(clkslow, S3C2410_CLKSLOW); - - /* if we started the UPLL, then allow to settle */ - - if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF)) - udelay(200); - - return 0; -} - -/* standard clock definitions */ - -static struct clk init_clocks_off[] = { - { - .name = "nand", - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_NAND, - }, { - .name = "sdi", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_SDI, - }, { - .name = "adc", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_ADC, - }, { - .name = "i2c", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_IIC, - }, { - .name = "iis", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_IIS, - }, { - .name = "spi", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_SPI, - } -}; - -static struct clk clk_lcd = { - .name = "lcd", - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_LCDC, -}; - -static struct clk clk_gpio = { - .name = "gpio", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_GPIO, -}; - -static struct clk clk_usb_host = { - .name = "usb-host", - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_USBH, -}; - -static struct clk clk_usb_device = { - .name = "usb-device", - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_USBD, -}; - -static struct clk clk_timers = { - .name = "timers", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_PWMT, -}; - -struct clk s3c24xx_clk_uart0 = { - .name = "uart", - .devname = "s3c2410-uart.0", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART0, -}; - -struct clk s3c24xx_clk_uart1 = { - .name = "uart", - .devname = "s3c2410-uart.1", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART1, -}; - -struct clk s3c24xx_clk_uart2 = { - .name = "uart", - .devname = "s3c2410-uart.2", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART2, -}; - -static struct clk clk_rtc = { - .name = "rtc", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_RTC, -}; - -static struct clk clk_watchdog = { - .name = "watchdog", - .parent = &clk_p, - .ctrlbit = 0, -}; - -static struct clk clk_usb_bus_host = { - .name = "usb-bus-host", - .parent = &clk_usb_bus, -}; - -static struct clk clk_usb_bus_gadget = { - .name = "usb-bus-gadget", - .parent = &clk_usb_bus, -}; - -static struct clk *init_clocks[] = { - &clk_lcd, - &clk_gpio, - &clk_usb_host, - &clk_usb_device, - &clk_timers, - &s3c24xx_clk_uart0, - &s3c24xx_clk_uart1, - &s3c24xx_clk_uart2, - &clk_rtc, - &clk_watchdog, - &clk_usb_bus_host, - &clk_usb_bus_gadget, -}; - -/* s3c2410_baseclk_add() - * - * Add all the clocks used by the s3c2410 or compatible CPUs - * such as the S3C2440 and S3C2442. - * - * We cannot use a system device as we are needed before any - * of the init-calls that initialise the devices are actually - * done. -*/ - -int __init s3c2410_baseclk_add(void) -{ - unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); - unsigned long clkcon = __raw_readl(S3C2410_CLKCON); - struct clk *xtal; - int ret; - int ptr; - - clk_upll.enable = s3c2410_upll_enable; - - if (s3c24xx_register_clock(&clk_usb_bus) < 0) - printk(KERN_ERR "failed to register usb bus clock\n"); - - /* register clocks from clock array */ - - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++) { - struct clk *clkp = init_clocks[ptr]; - - /* ensure that we note the clock state */ - - clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0; - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } - - /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsystems such as the LCD which do - * their own DMA requests to the bus can cause the system to lockup - * if they where in the middle of requesting bus access. - * - * Disabling the LCD clock if the LCD is active is very dangerous, - * and therefore the bootloader should be careful to not enable - * the LCD clock if it is not needed. - */ - - /* install (and disable) the clocks we do not need immediately */ - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - - /* show the clock-slow value */ - - xtal = clk_get(NULL, "xtal"); - - printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n", - print_mhz(clk_get_rate(xtal) / - ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))), - (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast", - (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on", - (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on"); - - return 0; -} diff --git a/arch/arm/mach-s3c24xx/clock-s3c2412.c b/arch/arm/mach-s3c24xx/clock-s3c2412.c deleted file mode 100644 index 192a5b2550b0..000000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2412.c +++ /dev/null @@ -1,760 +0,0 @@ -/* linux/arch/arm/mach-s3c2412/clock.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2412,S3C2413 Clock control support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/delay.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/io.h> - -#include <asm/mach/map.h> - -#include <mach/hardware.h> -#include <mach/regs-clock.h> -#include <mach/regs-gpio.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -/* We currently have to assume that the system is running - * from the XTPll input, and that all ***REFCLKs are being - * fed from it, as we cannot read the state of OM[4] from - * software. - * - * It would be possible for each board initialisation to - * set the correct muxing at initialisation -*/ - -static int s3c2412_clkcon_enable(struct clk *clk, int enable) -{ - unsigned int clocks = clk->ctrlbit; - unsigned long clkcon; - - clkcon = __raw_readl(S3C2410_CLKCON); - - if (enable) - clkcon |= clocks; - else - clkcon &= ~clocks; - - __raw_writel(clkcon, S3C2410_CLKCON); - - return 0; -} - -static int s3c2412_upll_enable(struct clk *clk, int enable) -{ - unsigned long upllcon = __raw_readl(S3C2410_UPLLCON); - unsigned long orig = upllcon; - - if (!enable) - upllcon |= S3C2412_PLLCON_OFF; - else - upllcon &= ~S3C2412_PLLCON_OFF; - - __raw_writel(upllcon, S3C2410_UPLLCON); - - /* allow ~150uS for the PLL to settle and lock */ - - if (enable && (orig & S3C2412_PLLCON_OFF)) - udelay(150); - - return 0; -} - -/* clock selections */ - -static struct clk clk_erefclk = { - .name = "erefclk", -}; - -static struct clk clk_urefclk = { - .name = "urefclk", -}; - -static int s3c2412_setparent_usysclk(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_urefclk) - clksrc &= ~S3C2412_CLKSRC_USYSCLK_UPLL; - else if (parent == &clk_upll) - clksrc |= S3C2412_CLKSRC_USYSCLK_UPLL; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static struct clk clk_usysclk = { - .name = "usysclk", - .parent = &clk_xtal, - .ops = &(struct clk_ops) { - .set_parent = s3c2412_setparent_usysclk, - }, -}; - -static struct clk clk_mrefclk = { - .name = "mrefclk", - .parent = &clk_xtal, -}; - -static struct clk clk_mdivclk = { - .name = "mdivclk", - .parent = &clk_xtal, -}; - -static int s3c2412_setparent_usbsrc(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_usysclk) - clksrc &= ~S3C2412_CLKSRC_USBCLK_HCLK; - else if (parent == &clk_h) - clksrc |= S3C2412_CLKSRC_USBCLK_HCLK; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static unsigned long s3c2412_roundrate_usbsrc(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - div = parent_rate / rate; - if (div > 2) - div = 2; - - return parent_rate / div; -} - -static unsigned long s3c2412_getrate_usbsrc(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2410_CLKDIVN); - - return parent_rate / ((div & S3C2412_CLKDIVN_USB48DIV) ? 2 : 1); -} - -static int s3c2412_setrate_usbsrc(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); - - rate = s3c2412_roundrate_usbsrc(clk, rate); - - if ((parent_rate / rate) == 2) - clkdivn |= S3C2412_CLKDIVN_USB48DIV; - else - clkdivn &= ~S3C2412_CLKDIVN_USB48DIV; - - __raw_writel(clkdivn, S3C2410_CLKDIVN); - return 0; -} - -static struct clk clk_usbsrc = { - .name = "usbsrc", - .ops = &(struct clk_ops) { - .get_rate = s3c2412_getrate_usbsrc, - .set_rate = s3c2412_setrate_usbsrc, - .round_rate = s3c2412_roundrate_usbsrc, - .set_parent = s3c2412_setparent_usbsrc, - }, -}; - -static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_mdivclk) - clksrc &= ~S3C2412_CLKSRC_MSYSCLK_MPLL; - else if (parent == &clk_mpll) - clksrc |= S3C2412_CLKSRC_MSYSCLK_MPLL; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static struct clk clk_msysclk = { - .name = "msysclk", - .ops = &(struct clk_ops) { - .set_parent = s3c2412_setparent_msysclk, - }, -}; - -static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent) -{ - unsigned long flags; - unsigned long clkdiv; - unsigned long dvs; - - /* Note, we current equate fclk andf msysclk for S3C2412 */ - - if (parent == &clk_msysclk || parent == &clk_f) - dvs = 0; - else if (parent == &clk_h) - dvs = S3C2412_CLKDIVN_DVSEN; - else - return -EINVAL; - - clk->parent = parent; - - /* update this under irq lockdown, clkdivn is not protected - * by the clock system. */ - - local_irq_save(flags); - - clkdiv = __raw_readl(S3C2410_CLKDIVN); - clkdiv &= ~S3C2412_CLKDIVN_DVSEN; - clkdiv |= dvs; - __raw_writel(clkdiv, S3C2410_CLKDIVN); - - local_irq_restore(flags); - - return 0; -} - -static struct clk clk_armclk = { - .name = "armclk", - .parent = &clk_msysclk, - .ops = &(struct clk_ops) { - .set_parent = s3c2412_setparent_armclk, - }, -}; - -/* these next clocks have an divider immediately after them, - * so we can register them with their divider and leave out the - * intermediate clock stage -*/ -static unsigned long s3c2412_roundrate_clksrc(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - /* note, we remove the +/- 1 calculations as they cancel out */ - - div = (rate / parent_rate); - - if (div < 1) - div = 1; - else if (div > 16) - div = 16; - - return parent_rate / div; -} - -static int s3c2412_setparent_uart(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_erefclk) - clksrc &= ~S3C2412_CLKSRC_UARTCLK_MPLL; - else if (parent == &clk_mpll) - clksrc |= S3C2412_CLKSRC_UARTCLK_MPLL; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static unsigned long s3c2412_getrate_uart(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2410_CLKDIVN); - - div &= S3C2412_CLKDIVN_UARTDIV_MASK; - div >>= S3C2412_CLKDIVN_UARTDIV_SHIFT; - - return parent_rate / (div + 1); -} - -static int s3c2412_setrate_uart(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); - - rate = s3c2412_roundrate_clksrc(clk, rate); - - clkdivn &= ~S3C2412_CLKDIVN_UARTDIV_MASK; - clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_UARTDIV_SHIFT; - - __raw_writel(clkdivn, S3C2410_CLKDIVN); - return 0; -} - -static struct clk clk_uart = { - .name = "uartclk", - .ops = &(struct clk_ops) { - .get_rate = s3c2412_getrate_uart, - .set_rate = s3c2412_setrate_uart, - .set_parent = s3c2412_setparent_uart, - .round_rate = s3c2412_roundrate_clksrc, - }, -}; - -static int s3c2412_setparent_i2s(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_erefclk) - clksrc &= ~S3C2412_CLKSRC_I2SCLK_MPLL; - else if (parent == &clk_mpll) - clksrc |= S3C2412_CLKSRC_I2SCLK_MPLL; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static unsigned long s3c2412_getrate_i2s(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2410_CLKDIVN); - - div &= S3C2412_CLKDIVN_I2SDIV_MASK; - div >>= S3C2412_CLKDIVN_I2SDIV_SHIFT; - - return parent_rate / (div + 1); -} - -static int s3c2412_setrate_i2s(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); - - rate = s3c2412_roundrate_clksrc(clk, rate); - - clkdivn &= ~S3C2412_CLKDIVN_I2SDIV_MASK; - clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_I2SDIV_SHIFT; - - __raw_writel(clkdivn, S3C2410_CLKDIVN); - return 0; -} - -static struct clk clk_i2s = { - .name = "i2sclk", - .ops = &(struct clk_ops) { - .get_rate = s3c2412_getrate_i2s, - .set_rate = s3c2412_setrate_i2s, - .set_parent = s3c2412_setparent_i2s, - .round_rate = s3c2412_roundrate_clksrc, - }, -}; - -static int s3c2412_setparent_cam(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_usysclk) - clksrc &= ~S3C2412_CLKSRC_CAMCLK_HCLK; - else if (parent == &clk_h) - clksrc |= S3C2412_CLKSRC_CAMCLK_HCLK; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} -static unsigned long s3c2412_getrate_cam(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2410_CLKDIVN); - - div &= S3C2412_CLKDIVN_CAMDIV_MASK; - div >>= S3C2412_CLKDIVN_CAMDIV_SHIFT; - - return parent_rate / (div + 1); -} - -static int s3c2412_setrate_cam(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); - - rate = s3c2412_roundrate_clksrc(clk, rate); - - clkdivn &= ~S3C2412_CLKDIVN_CAMDIV_MASK; - clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_CAMDIV_SHIFT; - - __raw_writel(clkdivn, S3C2410_CLKDIVN); - return 0; -} - -static struct clk clk_cam = { - .name = "camif-upll", /* same as 2440 name */ - .ops = &(struct clk_ops) { - .get_rate = s3c2412_getrate_cam, - .set_rate = s3c2412_setrate_cam, - .set_parent = s3c2412_setparent_cam, - .round_rate = s3c2412_roundrate_clksrc, - }, -}; - -/* standard clock definitions */ - -static struct clk init_clocks_disable[] = { - { - .name = "nand", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_NAND, - }, { - .name = "sdi", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_SDI, - }, { - .name = "adc", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_ADC, - }, { - .name = "i2c", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_IIC, - }, { - .name = "iis", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_IIS, - }, { - .name = "spi", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_SPI, - } -}; - -static struct clk init_clocks[] = { - { - .name = "dma.0", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_DMA0, - }, { - .name = "dma.1", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_DMA1, - }, { - .name = "dma.2", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_DMA2, - }, { - .name = "dma.3", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_DMA3, - }, { - .name = "lcd", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_LCDC, - }, { - .name = "gpio", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_GPIO, - }, { - .name = "usb-host", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_USBH, - }, { - .name = "usb-device", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_USBD, - }, { - .name = "timers", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_PWMT, - }, { - .name = "uart", - .devname = "s3c2412-uart.0", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_UART0, - }, { - .name = "uart", - .devname = "s3c2412-uart.1", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_UART1, - }, { - .name = "uart", - .devname = "s3c2412-uart.2", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_UART2, - }, { - .name = "rtc", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_RTC, - }, { - .name = "watchdog", - .parent = &clk_p, - .ctrlbit = 0, - }, { - .name = "usb-bus-gadget", - .parent = &clk_usb_bus, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_USB_DEV48, - }, { - .name = "usb-bus-host", - .parent = &clk_usb_bus, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_USB_HOST48, - } -}; - -/* clocks to add where we need to check their parentage */ - -struct clk_init { - struct clk *clk; - unsigned int bit; - struct clk *src_0; - struct clk *src_1; -}; - -static struct clk_init clks_src[] __initdata = { - { - .clk = &clk_usysclk, - .bit = S3C2412_CLKSRC_USBCLK_HCLK, - .src_0 = &clk_urefclk, - .src_1 = &clk_upll, - }, { - .clk = &clk_i2s, - .bit = S3C2412_CLKSRC_I2SCLK_MPLL, - .src_0 = &clk_erefclk, - .src_1 = &clk_mpll, - }, { - .clk = &clk_cam, - .bit = S3C2412_CLKSRC_CAMCLK_HCLK, - .src_0 = &clk_usysclk, - .src_1 = &clk_h, - }, { - .clk = &clk_msysclk, - .bit = S3C2412_CLKSRC_MSYSCLK_MPLL, - .src_0 = &clk_mdivclk, - .src_1 = &clk_mpll, - }, { - .clk = &clk_uart, - .bit = S3C2412_CLKSRC_UARTCLK_MPLL, - .src_0 = &clk_erefclk, - .src_1 = &clk_mpll, - }, { - .clk = &clk_usbsrc, - .bit = S3C2412_CLKSRC_USBCLK_HCLK, - .src_0 = &clk_usysclk, - .src_1 = &clk_h, - /* here we assume OM[4] select xtal */ - }, { - .clk = &clk_erefclk, - .bit = S3C2412_CLKSRC_EREFCLK_EXTCLK, - .src_0 = &clk_xtal, - .src_1 = &clk_ext, - }, { - .clk = &clk_urefclk, - .bit = S3C2412_CLKSRC_UREFCLK_EXTCLK, - .src_0 = &clk_xtal, - .src_1 = &clk_ext, - }, -}; - -/* s3c2412_clk_initparents - * - * Initialise the parents for the clocks that we get at start-time -*/ - -static void __init s3c2412_clk_initparents(void) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - struct clk_init *cip = clks_src; - struct clk *src; - int ptr; - int ret; - - for (ptr = 0; ptr < ARRAY_SIZE(clks_src); ptr++, cip++) { - ret = s3c24xx_register_clock(cip->clk); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - cip->clk->name, ret); - } - - src = (clksrc & cip->bit) ? cip->src_1 : cip->src_0; - - printk(KERN_INFO "%s: parent %s\n", cip->clk->name, src->name); - clk_set_parent(cip->clk, src); - } -} - -/* clocks to add straight away */ - -static struct clk *clks[] __initdata = { - &clk_ext, - &clk_usb_bus, - &clk_mrefclk, - &clk_armclk, -}; - -static struct clk_lookup s3c2412_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), - CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_usysclk), -}; - -int __init s3c2412_baseclk_add(void) -{ - unsigned long clkcon = __raw_readl(S3C2410_CLKCON); - unsigned int dvs; - struct clk *clkp; - int ret; - int ptr; - - clk_upll.enable = s3c2412_upll_enable; - clk_usb_bus.parent = &clk_usbsrc; - clk_usb_bus.rate = 0x0; - - clk_f.parent = &clk_msysclk; - - s3c2412_clk_initparents(); - - for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) { - clkp = clks[ptr]; - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } - - /* set the dvs state according to what we got at boot time */ - - dvs = __raw_readl(S3C2410_CLKDIVN) & S3C2412_CLKDIVN_DVSEN; - - if (dvs) - clk_armclk.parent = &clk_h; - - printk(KERN_INFO "S3C2412: DVS is %s\n", dvs ? "on" : "off"); - - /* ensure usb bus clock is within correct rate of 48MHz */ - - if (clk_get_rate(&clk_usb_bus) != (48 * 1000 * 1000)) { - printk(KERN_INFO "Warning: USB bus clock not at 48MHz\n"); - - /* for the moment, let's use the UPLL, and see if we can - * get 48MHz */ - - clk_set_parent(&clk_usysclk, &clk_upll); - clk_set_parent(&clk_usbsrc, &clk_usysclk); - clk_set_rate(&clk_usbsrc, 48*1000*1000); - } - - printk("S3C2412: upll %s, %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n", - (__raw_readl(S3C2410_UPLLCON) & S3C2412_PLLCON_OFF) ? "off":"on", - print_mhz(clk_get_rate(&clk_upll)), - print_mhz(clk_get_rate(&clk_usb_bus))); - - /* register clocks from clock array */ - - clkp = init_clocks; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) { - /* ensure that we note the clock state */ - - clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0; - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } - - /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsystems such as the LCD which do - * their own DMA requests to the bus can cause the system to lockup - * if they where in the middle of requesting bus access. - * - * Disabling the LCD clock if the LCD is active is very dangerous, - * and therefore the bootloader should be careful to not enable - * the LCD clock if it is not needed. - */ - - /* install (and disable) the clocks we do not need immediately */ - - clkp = init_clocks_disable; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - - s3c2412_clkcon_enable(clkp, 0); - } - - clkdev_add_table(s3c2412_clk_lookup, ARRAY_SIZE(s3c2412_clk_lookup)); - return 0; -} diff --git a/arch/arm/mach-s3c24xx/clock-s3c2416.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c deleted file mode 100644 index d421a72920a5..000000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2416.c +++ /dev/null @@ -1,171 +0,0 @@ -/* linux/arch/arm/mach-s3c2416/clock.c - * - * Copyright (c) 2010 Simtec Electronics - * Copyright (c) 2010 Ben Dooks <ben-linux@fluff.org> - * - * S3C2416 Clock control support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/init.h> -#include <linux/clk.h> - -#include <plat/clock.h> -#include <plat/clock-clksrc.h> -#include <plat/cpu.h> - -#include <plat/cpu-freq.h> -#include <plat/pll.h> - -#include <asm/mach/map.h> - -#include <mach/regs-clock.h> -#include <mach/regs-s3c2443-clock.h> - -/* armdiv - * - * this clock is sourced from msysclk and can have a number of - * divider values applied to it to then be fed into armclk. - * The real clock definition is done in s3c2443-clock.c, - * only the armdiv divisor table must be defined here. -*/ - -static unsigned int armdiv[8] = { - [0] = 1, - [1] = 2, - [2] = 3, - [3] = 4, - [5] = 6, - [7] = 8, -}; - -static struct clksrc_clk hsspi_eplldiv = { - .clk = { - .name = "hsspi-eplldiv", - .parent = &clk_esysclk.clk, - .ctrlbit = (1 << 14), - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 24 }, -}; - -static struct clk *hsspi_sources[] = { - [0] = &hsspi_eplldiv.clk, - [1] = NULL, /* to fix */ -}; - -static struct clksrc_clk hsspi_mux = { - .clk = { - .name = "hsspi-if", - }, - .sources = &(struct clksrc_sources) { - .sources = hsspi_sources, - .nr_sources = ARRAY_SIZE(hsspi_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 18 }, -}; - -static struct clksrc_clk hsmmc_div[] = { - [0] = { - .clk = { - .name = "hsmmc-div", - .devname = "s3c-sdhci.0", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2416_CLKDIV2, .size = 2, .shift = 6 }, - }, - [1] = { - .clk = { - .name = "hsmmc-div", - .devname = "s3c-sdhci.1", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 }, - }, -}; - -static struct clksrc_clk hsmmc_mux0 = { - .clk = { - .name = "hsmmc-if", - .devname = "s3c-sdhci.0", - .ctrlbit = (1 << 6), - .enable = s3c2443_clkcon_enable_s, - }, - .sources = &(struct clksrc_sources) { - .nr_sources = 2, - .sources = (struct clk * []) { - [0] = &hsmmc_div[0].clk, - [1] = NULL, /* to fix */ - }, - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 16 }, -}; - -static struct clksrc_clk hsmmc_mux1 = { - .clk = { - .name = "hsmmc-if", - .devname = "s3c-sdhci.1", - .ctrlbit = (1 << 12), - .enable = s3c2443_clkcon_enable_s, - }, - .sources = &(struct clksrc_sources) { - .nr_sources = 2, - .sources = (struct clk * []) { - [0] = &hsmmc_div[1].clk, - [1] = NULL, /* to fix */ - }, - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 17 }, -}; - -static struct clk hsmmc0_clk = { - .name = "hsmmc", - .devname = "s3c-sdhci.0", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2416_HCLKCON_HSMMC0, -}; - -static struct clksrc_clk *clksrcs[] __initdata = { - &hsspi_eplldiv, - &hsspi_mux, - &hsmmc_div[0], - &hsmmc_div[1], - &hsmmc_mux0, - &hsmmc_mux1, -}; - -static struct clk_lookup s3c2416_clk_lookup[] = { - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk), - /* s3c2443-spi.0 is used on s3c2416 and s3c2450 as well */ - CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &hsspi_mux.clk), -}; - -void __init s3c2416_init_clocks(int xtal) -{ - u32 epllcon = __raw_readl(S3C2443_EPLLCON); - u32 epllcon1 = __raw_readl(S3C2443_EPLLCON+4); - int ptr; - - /* s3c2416 EPLL compatible with s3c64xx */ - clk_epll.rate = s3c_get_pll6553x(xtal, epllcon, epllcon1); - - clk_epll.parent = &clk_epllref.clk; - - s3c2443_common_init_clocks(xtal, s3c2416_get_pll, - armdiv, ARRAY_SIZE(armdiv), - S3C2416_CLKDIV0_ARMDIV_MASK); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_register_clksrc(clksrcs[ptr], 1); - - s3c24xx_register_clock(&hsmmc0_clk); - clkdev_add_table(s3c2416_clk_lookup, ARRAY_SIZE(s3c2416_clk_lookup)); - -} diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c deleted file mode 100644 index 5527226fd61f..000000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2440.c +++ /dev/null @@ -1,217 +0,0 @@ -/* linux/arch/arm/mach-s3c2440/clock.c - * - * Copyright (c) 2004-2005 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2440 Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/mutex.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> - -#include <mach/hardware.h> -#include <linux/atomic.h> -#include <asm/irq.h> - -#include <mach/regs-clock.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -/* S3C2440 extended clock support */ - -static unsigned long s3c2440_camif_upll_round(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - /* note, we remove the +/- 1 calculations for the divisor */ - - div = (parent_rate / rate) / 2; - - if (div < 1) - div = 1; - else if (div > 16) - div = 16; - - return parent_rate / (div * 2); -} - -static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - - rate = s3c2440_camif_upll_round(clk, rate); - - camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK); - - if (rate != parent_rate) { - camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; - camdivn |= (((parent_rate / rate) / 2) - 1); - } - - __raw_writel(camdivn, S3C2440_CAMDIVN); - - return 0; -} - -static unsigned long s3c2440_camif_upll_getrate(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - - if (!(camdivn & S3C2440_CAMDIVN_CAMCLK_SEL)) - return parent_rate; - - camdivn &= S3C2440_CAMDIVN_CAMCLK_MASK; - - return parent_rate / (camdivn + 1) / 2; -} - -/* Extra S3C2440 clocks */ - -static struct clk s3c2440_clk_cam = { - .name = "camif", - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_CAMERA, -}; - -static struct clk s3c2440_clk_cam_upll = { - .name = "camif-upll", - .ops = &(struct clk_ops) { - .set_rate = s3c2440_camif_upll_setrate, - .get_rate = s3c2440_camif_upll_getrate, - .round_rate = s3c2440_camif_upll_round, - }, -}; - -static struct clk s3c2440_clk_ac97 = { - .name = "ac97", - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_AC97, -}; - -#define S3C24XX_VA_UART0 (S3C_VA_UART) -#define S3C24XX_VA_UART1 (S3C_VA_UART + 0x4000 ) -#define S3C24XX_VA_UART2 (S3C_VA_UART + 0x8000 ) -#define S3C24XX_VA_UART3 (S3C_VA_UART + 0xC000 ) - -static unsigned long s3c2440_fclk_n_getrate(struct clk *clk) -{ - unsigned long ucon0, ucon1, ucon2, divisor; - - /* the fun of calculating the uart divisors on the s3c2440 */ - ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON); - ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON); - ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON); - - ucon0 &= S3C2440_UCON0_DIVMASK; - ucon1 &= S3C2440_UCON1_DIVMASK; - ucon2 &= S3C2440_UCON2_DIVMASK; - - if (ucon0 != 0) - divisor = (ucon0 >> S3C2440_UCON_DIVSHIFT) + 6; - else if (ucon1 != 0) - divisor = (ucon1 >> S3C2440_UCON_DIVSHIFT) + 21; - else if (ucon2 != 0) - divisor = (ucon2 >> S3C2440_UCON_DIVSHIFT) + 36; - else - /* manual calims 44, seems to be 9 */ - divisor = 9; - - return clk_get_rate(clk->parent) / divisor; -} - -static struct clk s3c2440_clk_fclk_n = { - .name = "fclk_n", - .parent = &clk_f, - .ops = &(struct clk_ops) { - .get_rate = s3c2440_fclk_n_getrate, - }, -}; - -static struct clk_lookup s3c2440_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), - CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n), - CLKDEV_INIT("s3c2440-uart.0", "uart", &s3c24xx_clk_uart0), - CLKDEV_INIT("s3c2440-uart.1", "uart", &s3c24xx_clk_uart1), - CLKDEV_INIT("s3c2440-uart.2", "uart", &s3c24xx_clk_uart2), - CLKDEV_INIT("s3c2440-camif", "camera", &s3c2440_clk_cam_upll), -}; - -static int __init_refok s3c2440_clk_add(struct device *dev, struct subsys_interface *sif) -{ - struct clk *clock_upll; - struct clk *clock_h; - struct clk *clock_p; - - clock_p = clk_get(NULL, "pclk"); - clock_h = clk_get(NULL, "hclk"); - clock_upll = clk_get(NULL, "upll"); - - if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) { - printk(KERN_ERR "S3C2440: Failed to get parent clocks\n"); - return -EINVAL; - } - - s3c2440_clk_cam.parent = clock_h; - s3c2440_clk_ac97.parent = clock_p; - s3c2440_clk_cam_upll.parent = clock_upll; - s3c24xx_register_clock(&s3c2440_clk_fclk_n); - - s3c24xx_register_clock(&s3c2440_clk_ac97); - s3c24xx_register_clock(&s3c2440_clk_cam); - s3c24xx_register_clock(&s3c2440_clk_cam_upll); - clkdev_add_table(s3c2440_clk_lookup, ARRAY_SIZE(s3c2440_clk_lookup)); - - clk_disable(&s3c2440_clk_ac97); - clk_disable(&s3c2440_clk_cam); - - return 0; -} - -static struct subsys_interface s3c2440_clk_interface = { - .name = "s3c2440_clk", - .subsys = &s3c2440_subsys, - .add_dev = s3c2440_clk_add, -}; - -static __init int s3c24xx_clk_init(void) -{ - return subsys_interface_register(&s3c2440_clk_interface); -} - -arch_initcall(s3c24xx_clk_init); diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c deleted file mode 100644 index 76cd31f7804e..000000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2443.c +++ /dev/null @@ -1,212 +0,0 @@ -/* linux/arch/arm/mach-s3c2443/clock.c - * - * Copyright (c) 2007, 2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2443 Clock control support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/serial_core.h> -#include <linux/io.h> - -#include <asm/mach/map.h> - -#include <mach/hardware.h> - -#include <mach/regs-s3c2443-clock.h> - -#include <plat/cpu-freq.h> - -#include <plat/clock.h> -#include <plat/clock-clksrc.h> -#include <plat/cpu.h> - -/* We currently have to assume that the system is running - * from the XTPll input, and that all ***REFCLKs are being - * fed from it, as we cannot read the state of OM[4] from - * software. - * - * It would be possible for each board initialisation to - * set the correct muxing at initialisation -*/ - -/* clock selections */ - -/* armdiv - * - * this clock is sourced from msysclk and can have a number of - * divider values applied to it to then be fed into armclk. - * The real clock definition is done in s3c2443-clock.c, - * only the armdiv divisor table must be defined here. -*/ - -static unsigned int armdiv[16] = { - [S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 1, - [S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 2, - [S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 3, - [S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 4, - [S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 6, - [S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 8, - [S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 12, - [S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 16, -}; - -/* hsspi - * - * high-speed spi clock, sourced from esysclk -*/ - -static struct clksrc_clk clk_hsspi = { - .clk = { - .name = "hsspi-if", - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_HSSPICLK, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 }, -}; - - -/* clk_hsmcc_div - * - * this clock is sourced from epll, and is fed through a divider, - * to a mux controlled by sclkcon where either it or a extclk can - * be fed to the hsmmc block -*/ - -static struct clksrc_clk clk_hsmmc_div = { - .clk = { - .name = "hsmmc-div", - .devname = "s3c-sdhci.1", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 }, -}; - -static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2443_SCLKCON); - - clksrc &= ~(S3C2443_SCLKCON_HSMMCCLK_EXT | - S3C2443_SCLKCON_HSMMCCLK_EPLL); - - if (parent == &clk_epll) - clksrc |= S3C2443_SCLKCON_HSMMCCLK_EPLL; - else if (parent == &clk_ext) - clksrc |= S3C2443_SCLKCON_HSMMCCLK_EXT; - else - return -EINVAL; - - if (clk->usage > 0) { - __raw_writel(clksrc, S3C2443_SCLKCON); - } - - clk->parent = parent; - return 0; -} - -static int s3c2443_enable_hsmmc(struct clk *clk, int enable) -{ - return s3c2443_setparent_hsmmc(clk, clk->parent); -} - -static struct clk clk_hsmmc = { - .name = "hsmmc-if", - .devname = "s3c-sdhci.1", - .parent = &clk_hsmmc_div.clk, - .enable = s3c2443_enable_hsmmc, - .ops = &(struct clk_ops) { - .set_parent = s3c2443_setparent_hsmmc, - }, -}; - -/* standard clock definitions */ - -static struct clk init_clocks_off[] = { - { - .name = "sdi", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_SDI, - }, { - .name = "spi", - .devname = "s3c2410-spi.0", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_SPI1, - } -}; - -/* clocks to add straight away */ - -static struct clksrc_clk *clksrcs[] __initdata = { - &clk_hsspi, - &clk_hsmmc_div, -}; - -static struct clk *clks[] __initdata = { - &clk_hsmmc, -}; - -static struct clk_lookup s3c2443_clk_lookup[] = { - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc), - CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &clk_hsspi.clk), -}; - -void __init s3c2443_init_clocks(int xtal) -{ - unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); - int ptr; - - clk_epll.rate = s3c2443_get_epll(epllcon, xtal); - clk_epll.parent = &clk_epllref.clk; - - s3c2443_common_init_clocks(xtal, s3c2443_get_mpll, - armdiv, ARRAY_SIZE(armdiv), - S3C2443_CLKDIV0_ARMDIV_MASK); - - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_register_clksrc(clksrcs[ptr], 1); - - /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsystems such as the LCD which do - * their own DMA requests to the bus can cause the system to lockup - * if they where in the middle of requesting bus access. - * - * Disabling the LCD clock if the LCD is active is very dangerous, - * and therefore the bootloader should be careful to not enable - * the LCD clock if it is not needed. - */ - - /* install (and disable) the clocks we do not need immediately */ - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup)); -} diff --git a/arch/arm/mach-s3c24xx/clock-s3c244x.c b/arch/arm/mach-s3c24xx/clock-s3c244x.c deleted file mode 100644 index 6d9b688c442b..000000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c244x.c +++ /dev/null @@ -1,141 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c - * - * Copyright (c) 2004-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2440/S3C2442 Common clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <linux/atomic.h> -#include <asm/irq.h> - -#include <mach/regs-clock.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent) -{ - unsigned long camdivn; - unsigned long dvs; - - if (parent == &clk_f) - dvs = 0; - else if (parent == &clk_h) - dvs = S3C2440_CAMDIVN_DVSEN; - else - return -EINVAL; - - clk->parent = parent; - - camdivn = __raw_readl(S3C2440_CAMDIVN); - camdivn &= ~S3C2440_CAMDIVN_DVSEN; - camdivn |= dvs; - __raw_writel(camdivn, S3C2440_CAMDIVN); - - return 0; -} - -static struct clk clk_arm = { - .name = "armclk", - .id = -1, - .ops = &(struct clk_ops) { - .set_parent = s3c2440_setparent_armclk, - }, -}; - -static int s3c244x_clk_add(struct device *dev, struct subsys_interface *sif) -{ - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - unsigned long clkdivn; - struct clk *clock_upll; - int ret; - - printk("S3C244X: Clock Support, DVS %s\n", - (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off"); - - clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f; - - ret = s3c24xx_register_clock(&clk_arm); - if (ret < 0) { - printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret); - return ret; - } - - clock_upll = clk_get(NULL, "upll"); - if (IS_ERR(clock_upll)) { - printk(KERN_ERR "S3C244X: Failed to get upll clock\n"); - return -ENOENT; - } - - /* check rate of UPLL, and if it is near 96MHz, then change - * to using half the UPLL rate for the system */ - - if (clk_get_rate(clock_upll) > (94 * MHZ)) { - clk_usb_bus.rate = clk_get_rate(clock_upll) / 2; - - spin_lock(&clocks_lock); - - clkdivn = __raw_readl(S3C2410_CLKDIVN); - clkdivn |= S3C2440_CLKDIVN_UCLK; - __raw_writel(clkdivn, S3C2410_CLKDIVN); - - spin_unlock(&clocks_lock); - } - - return 0; -} - -static struct subsys_interface s3c2440_clk_interface = { - .name = "s3c2440_clk", - .subsys = &s3c2440_subsys, - .add_dev = s3c244x_clk_add, -}; - -static int s3c2440_clk_init(void) -{ - return subsys_interface_register(&s3c2440_clk_interface); -} - -arch_initcall(s3c2440_clk_init); - -static struct subsys_interface s3c2442_clk_interface = { - .name = "s3c2442_clk", - .subsys = &s3c2442_subsys, - .add_dev = s3c244x_clk_add, -}; - -static int s3c2442_clk_init(void) -{ - return subsys_interface_register(&s3c2442_clk_interface); -} - -arch_initcall(s3c2442_clk_init); diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c deleted file mode 100644 index 65d3eef73090..000000000000 --- a/arch/arm/mach-s3c24xx/common-s3c2443.c +++ /dev/null @@ -1,675 +0,0 @@ -/* - * Common code for SoCs starting with the S3C2443 - * - * Copyright (c) 2007, 2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <mach/regs-s3c2443-clock.h> - -#include <plat/clock.h> -#include <plat/clock-clksrc.h> -#include <plat/cpu.h> - -#include <plat/cpu-freq.h> - - -static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable) -{ - u32 ctrlbit = clk->ctrlbit; - u32 con = __raw_readl(reg); - - if (enable) - con |= ctrlbit; - else - con &= ~ctrlbit; - - __raw_writel(con, reg); - return 0; -} - -int s3c2443_clkcon_enable_h(struct clk *clk, int enable) -{ - return s3c2443_gate(S3C2443_HCLKCON, clk, enable); -} - -int s3c2443_clkcon_enable_p(struct clk *clk, int enable) -{ - return s3c2443_gate(S3C2443_PCLKCON, clk, enable); -} - -int s3c2443_clkcon_enable_s(struct clk *clk, int enable) -{ - return s3c2443_gate(S3C2443_SCLKCON, clk, enable); -} - -/* mpllref is a direct descendant of clk_xtal by default, but it is not - * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as - * such directly equating the two source clocks is impossible. - */ -static struct clk clk_mpllref = { - .name = "mpllref", - .parent = &clk_xtal, -}; - -static struct clk *clk_epllref_sources[] = { - [0] = &clk_mpllref, - [1] = &clk_mpllref, - [2] = &clk_xtal, - [3] = &clk_ext, -}; - -struct clksrc_clk clk_epllref = { - .clk = { - .name = "epllref", - }, - .sources = &(struct clksrc_sources) { - .sources = clk_epllref_sources, - .nr_sources = ARRAY_SIZE(clk_epllref_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 }, -}; - -/* esysclk - * - * this is sourced from either the EPLL or the EPLLref clock -*/ - -static struct clk *clk_sysclk_sources[] = { - [0] = &clk_epllref.clk, - [1] = &clk_epll, -}; - -struct clksrc_clk clk_esysclk = { - .clk = { - .name = "esysclk", - .parent = &clk_epll, - }, - .sources = &(struct clksrc_sources) { - .sources = clk_sysclk_sources, - .nr_sources = ARRAY_SIZE(clk_sysclk_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 }, -}; - -static unsigned long s3c2443_getrate_mdivclk(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2443_CLKDIV0); - - div &= S3C2443_CLKDIV0_EXTDIV_MASK; - div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1); /* x2 */ - - return parent_rate / (div + 1); -} - -static struct clk clk_mdivclk = { - .name = "mdivclk", - .parent = &clk_mpllref, - .ops = &(struct clk_ops) { - .get_rate = s3c2443_getrate_mdivclk, - }, -}; - -static struct clk *clk_msysclk_sources[] = { - [0] = &clk_mpllref, - [1] = &clk_mpll, - [2] = &clk_mdivclk, - [3] = &clk_mpllref, -}; - -static struct clksrc_clk clk_msysclk = { - .clk = { - .name = "msysclk", - .parent = &clk_xtal, - }, - .sources = &(struct clksrc_sources) { - .sources = clk_msysclk_sources, - .nr_sources = ARRAY_SIZE(clk_msysclk_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 }, -}; - -/* prediv - * - * this divides the msysclk down to pass to h/p/etc. - */ - -static unsigned long s3c2443_prediv_getrate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); - - clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK; - clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT; - - return rate / (clkdiv0 + 1); -} - -static struct clk clk_prediv = { - .name = "prediv", - .parent = &clk_msysclk.clk, - .ops = &(struct clk_ops) { - .get_rate = s3c2443_prediv_getrate, - }, -}; - -/* hclk divider - * - * divides the prediv and provides the hclk. - */ - -static unsigned long s3c2443_hclkdiv_getrate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); - - clkdiv0 &= S3C2443_CLKDIV0_HCLKDIV_MASK; - - return rate / (clkdiv0 + 1); -} - -static struct clk_ops clk_h_ops = { - .get_rate = s3c2443_hclkdiv_getrate, -}; - -/* pclk divider - * - * divides the hclk and provides the pclk. - */ - -static unsigned long s3c2443_pclkdiv_getrate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); - - clkdiv0 = ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 1 : 0); - - return rate / (clkdiv0 + 1); -} - -static struct clk_ops clk_p_ops = { - .get_rate = s3c2443_pclkdiv_getrate, -}; - -/* armdiv - * - * this clock is sourced from msysclk and can have a number of - * divider values applied to it to then be fed into armclk. -*/ - -static unsigned int *armdiv; -static int nr_armdiv; -static int armdivmask; - -static unsigned long s3c2443_armclk_roundrate(struct clk *clk, - unsigned long rate) -{ - unsigned long parent = clk_get_rate(clk->parent); - unsigned long calc; - unsigned best = 256; /* bigger than any value */ - unsigned div; - int ptr; - - if (!nr_armdiv) - return -EINVAL; - - for (ptr = 0; ptr < nr_armdiv; ptr++) { - div = armdiv[ptr]; - if (div) { - /* cpufreq provides 266mhz as 266666000 not 266666666 */ - calc = (parent / div / 1000) * 1000; - if (calc <= rate && div < best) - best = div; - } - } - - return parent / best; -} - -static unsigned long s3c2443_armclk_getrate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkcon0; - int val; - - if (!nr_armdiv || !armdivmask) - return -EINVAL; - - clkcon0 = __raw_readl(S3C2443_CLKDIV0); - clkcon0 &= armdivmask; - val = clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT; - - return rate / armdiv[val]; -} - -static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate) -{ - unsigned long parent = clk_get_rate(clk->parent); - unsigned long calc; - unsigned div; - unsigned best = 256; /* bigger than any value */ - int ptr; - int val = -1; - - if (!nr_armdiv || !armdivmask) - return -EINVAL; - - for (ptr = 0; ptr < nr_armdiv; ptr++) { - div = armdiv[ptr]; - if (div) { - /* cpufreq provides 266mhz as 266666000 not 266666666 */ - calc = (parent / div / 1000) * 1000; - if (calc <= rate && div < best) { - best = div; - val = ptr; - } - } - } - - if (val >= 0) { - unsigned long clkcon0; - - clkcon0 = __raw_readl(S3C2443_CLKDIV0); - clkcon0 &= ~armdivmask; - clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT; - __raw_writel(clkcon0, S3C2443_CLKDIV0); - } - - return (val == -1) ? -EINVAL : 0; -} - -static struct clk clk_armdiv = { - .name = "armdiv", - .parent = &clk_msysclk.clk, - .ops = &(struct clk_ops) { - .round_rate = s3c2443_armclk_roundrate, - .get_rate = s3c2443_armclk_getrate, - .set_rate = s3c2443_armclk_setrate, - }, -}; - -/* armclk - * - * this is the clock fed into the ARM core itself, from armdiv or from hclk. - */ - -static struct clk *clk_arm_sources[] = { - [0] = &clk_armdiv, - [1] = &clk_h, -}; - -static struct clksrc_clk clk_arm = { - .clk = { - .name = "armclk", - }, - .sources = &(struct clksrc_sources) { - .sources = clk_arm_sources, - .nr_sources = ARRAY_SIZE(clk_arm_sources), - }, - .reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 }, -}; - -/* usbhost - * - * usb host bus-clock, usually 48MHz to provide USB bus clock timing -*/ - -static struct clksrc_clk clk_usb_bus_host = { - .clk = { - .name = "usb-bus-host-parent", - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_USBHOST, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 }, -}; - -/* common clksrc clocks */ - -static struct clksrc_clk clksrc_clks[] = { - { - /* camera interface bus-clock, divided down from esysclk */ - .clk = { - .name = "camif-upll", /* same as 2440 name */ - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_CAMCLK, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 }, - }, { - .clk = { - .name = "display-if", - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_DISPCLK, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 }, - }, -}; - -static struct clksrc_clk clk_esys_uart = { - /* ART baud-rate clock sourced from esysclk via a divisor */ - .clk = { - .name = "uartclk", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 }, -}; - -static struct clk clk_i2s_ext = { - .name = "i2s-ext", -}; - -/* i2s_eplldiv - * - * This clock is the output from the I2S divisor of ESYSCLK, and is separate - * from the mux that comes after it (cannot merge into one single clock) -*/ - -static struct clksrc_clk clk_i2s_eplldiv = { - .clk = { - .name = "i2s-eplldiv", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, }, -}; - -/* i2s-ref - * - * i2s bus reference clock, selectable from external, esysclk or epllref - * - * Note, this used to be two clocks, but was compressed into one. -*/ - -static struct clk *clk_i2s_srclist[] = { - [0] = &clk_i2s_eplldiv.clk, - [1] = &clk_i2s_ext, - [2] = &clk_epllref.clk, - [3] = &clk_epllref.clk, -}; - -static struct clksrc_clk clk_i2s = { - .clk = { - .name = "i2s-if", - .ctrlbit = S3C2443_SCLKCON_I2SCLK, - .enable = s3c2443_clkcon_enable_s, - - }, - .sources = &(struct clksrc_sources) { - .sources = clk_i2s_srclist, - .nr_sources = ARRAY_SIZE(clk_i2s_srclist), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 }, -}; - -static struct clk init_clocks_off[] = { - { - .name = "iis", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_IIS, - }, { - .name = "adc", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_ADC, - }, { - .name = "i2c", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_IIC, - } -}; - -static struct clk init_clocks[] = { - { - .name = "dma.0", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA0, - }, { - .name = "dma.1", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA1, - }, { - .name = "dma.2", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA2, - }, { - .name = "dma.3", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA3, - }, { - .name = "dma.4", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA4, - }, { - .name = "dma.5", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA5, - }, { - .name = "gpio", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_GPIO, - }, { - .name = "usb-host", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_USBH, - }, { - .name = "usb-device", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_USBD, - }, { - .name = "lcd", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_LCDC, - - }, { - .name = "timers", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_PWMT, - }, { - .name = "cfc", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_CFC, - }, { - .name = "ssmc", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_SSMC, - }, { - .name = "uart", - .devname = "s3c2440-uart.0", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART0, - }, { - .name = "uart", - .devname = "s3c2440-uart.1", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART1, - }, { - .name = "uart", - .devname = "s3c2440-uart.2", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART2, - }, { - .name = "uart", - .devname = "s3c2440-uart.3", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART3, - }, { - .name = "rtc", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_RTC, - }, { - .name = "watchdog", - .parent = &clk_p, - .ctrlbit = S3C2443_PCLKCON_WDT, - }, { - .name = "ac97", - .parent = &clk_p, - .ctrlbit = S3C2443_PCLKCON_AC97, - }, { - .name = "nand", - .parent = &clk_h, - }, { - .name = "usb-bus-host", - .parent = &clk_usb_bus_host.clk, - } -}; - -static struct clk hsmmc1_clk = { - .name = "hsmmc", - .devname = "s3c-sdhci.1", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_HSMMC, -}; - -static struct clk hsspi_clk = { - .name = "spi", - .devname = "s3c2443-spi.0", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_HSSPI, -}; - -/* EPLLCON compatible enough to get on/off information */ - -void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll) -{ - unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); - unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON); - struct clk *xtal_clk; - unsigned long xtal; - unsigned long pll; - int ptr; - - xtal_clk = clk_get(NULL, "xtal"); - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - pll = get_mpll(mpllcon, xtal); - clk_msysclk.clk.rate = pll; - clk_mpll.rate = pll; - - printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n", - (mpllcon & S3C2443_PLLCON_OFF) ? "off" : "on", - print_mhz(pll), print_mhz(clk_get_rate(&clk_armdiv)), - print_mhz(clk_get_rate(&clk_h)), - print_mhz(clk_get_rate(&clk_p))); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++) - s3c_set_clksrc(&clksrc_clks[ptr], true); - - /* ensure usb bus clock is within correct rate of 48MHz */ - - if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) { - printk(KERN_INFO "Warning: USB host bus not at 48MHz\n"); - clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000); - } - - printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n", - (epllcon & S3C2443_PLLCON_OFF) ? "off" : "on", - print_mhz(clk_get_rate(&clk_epll)), - print_mhz(clk_get_rate(&clk_usb_bus))); -} - -static struct clk *clks[] __initdata = { - &clk_prediv, - &clk_mpllref, - &clk_mdivclk, - &clk_ext, - &clk_epll, - &clk_usb_bus, - &clk_armdiv, - &hsmmc1_clk, - &hsspi_clk, -}; - -static struct clksrc_clk *clksrcs[] __initdata = { - &clk_i2s_eplldiv, - &clk_i2s, - &clk_usb_bus_host, - &clk_epllref, - &clk_esysclk, - &clk_msysclk, - &clk_arm, -}; - -static struct clk_lookup s3c2443_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), - CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk), - CLKDEV_INIT("s3c2443-spi.0", "spi_busclk0", &hsspi_clk), -}; - -void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, - unsigned int *divs, int nr_divs, - int divmask) -{ - int ptr; - - armdiv = divs; - nr_armdiv = nr_divs; - armdivmask = divmask; - - /* s3c2443 parents h clock from prediv */ - clk_h.parent = &clk_prediv; - clk_h.ops = &clk_h_ops; - - /* and p clock from h clock */ - clk_p.parent = &clk_h; - clk_p.ops = &clk_p_ops; - - clk_usb_bus.parent = &clk_usb_bus_host.clk; - clk_epll.parent = &clk_epllref.clk; - - s3c24xx_register_baseclocks(xtal); - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_register_clksrc(clksrcs[ptr], 1); - - s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks)); - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - - /* See s3c2443/etc notes on disabling clocks at init time */ - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup)); - - s3c2443_common_setup_clocks(get_mpll); -} diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index 1bc8e73c94f9..c0763b837745 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -53,6 +53,7 @@ #include <plat/cpu-freq.h> #include <plat/pll.h> #include <plat/pwm-core.h> +#include <plat/watchdog-reset.h> #include "common.h" @@ -73,7 +74,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32410000, .idmask = 0xffffffff, .map_io = s3c2410_map_io, - .init_clocks = s3c2410_init_clocks, .init_uarts = s3c2410_init_uarts, .init = s3c2410_init, .name = name_s3c2410 @@ -82,7 +82,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32410002, .idmask = 0xffffffff, .map_io = s3c2410_map_io, - .init_clocks = s3c2410_init_clocks, .init_uarts = s3c2410_init_uarts, .init = s3c2410a_init, .name = name_s3c2410a @@ -91,7 +90,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32440000, .idmask = 0xffffffff, .map_io = s3c2440_map_io, - .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2440_init, .name = name_s3c2440 @@ -100,7 +98,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32440001, .idmask = 0xffffffff, .map_io = s3c2440_map_io, - .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2440_init, .name = name_s3c2440a @@ -109,7 +106,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32440aaa, .idmask = 0xffffffff, .map_io = s3c2442_map_io, - .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2442_init, .name = name_s3c2442 @@ -118,7 +114,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32440aab, .idmask = 0xffffffff, .map_io = s3c2442_map_io, - .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2442_init, .name = name_s3c2442b @@ -127,7 +122,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32412001, .idmask = 0xffffffff, .map_io = s3c2412_map_io, - .init_clocks = s3c2412_init_clocks, .init_uarts = s3c2412_init_uarts, .init = s3c2412_init, .name = name_s3c2412, @@ -136,7 +130,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32412003, .idmask = 0xffffffff, .map_io = s3c2412_map_io, - .init_clocks = s3c2412_init_clocks, .init_uarts = s3c2412_init_uarts, .init = s3c2412_init, .name = name_s3c2412, @@ -145,7 +138,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32450003, .idmask = 0xffffffff, .map_io = s3c2416_map_io, - .init_clocks = s3c2416_init_clocks, .init_uarts = s3c2416_init_uarts, .init = s3c2416_init, .name = name_s3c2416, @@ -154,7 +146,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32443001, .idmask = 0xffffffff, .map_io = s3c2443_map_io, - .init_clocks = s3c2443_init_clocks, .init_uarts = s3c2443_init_uarts, .init = s3c2443_init, .name = name_s3c2443, @@ -316,21 +307,6 @@ struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = { }, }; -/* initialise all the clocks */ - -void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk, - unsigned long hclk, - unsigned long pclk) -{ - clk_upll.rate = s3c24xx_get_pll(__raw_readl(S3C2410_UPLLCON), - clk_xtal.rate); - - clk_mpll.rate = fclk; - clk_h.rate = hclk; - clk_p.rate = pclk; - clk_f.rate = fclk; -} - #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \ defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) static struct resource s3c2410_dma_resource[] = { @@ -534,3 +510,62 @@ struct platform_device s3c2443_device_dma = { }, }; #endif + +#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2410) +void __init s3c2410_init_clocks(int xtal) +{ + s3c2410_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR); + samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); +} +#endif + +#ifdef CONFIG_CPU_S3C2412 +void __init s3c2412_init_clocks(int xtal) +{ + s3c2412_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR); +} +#endif + +#ifdef CONFIG_CPU_S3C2416 +void __init s3c2416_init_clocks(int xtal) +{ + s3c2443_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR); +} +#endif + +#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2440) +void __init s3c2440_init_clocks(int xtal) +{ + s3c2410_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR); + samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); +} +#endif + +#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2442) +void __init s3c2442_init_clocks(int xtal) +{ + s3c2410_common_clk_init(NULL, xtal, 2, S3C24XX_VA_CLKPWR); + samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); +} +#endif + +#ifdef CONFIG_CPU_S3C2443 +void __init s3c2443_init_clocks(int xtal) +{ + s3c2443_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR); +} +#endif + +#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2440) || \ + defined(CONFIG_CPU_S3C2442) +static struct resource s3c2410_dclk_resource[] = { + [0] = DEFINE_RES_MEM(0x56000084, 0x4), +}; + +struct platform_device s3c2410_device_dclk = { + .name = "s3c2410-dclk", + .id = 0, + .num_resources = ARRAY_SIZE(s3c2410_dclk_resource), + .resource = s3c2410_dclk_resource, +}; +#endif diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h index e46c10417216..ac3ff12a0601 100644 --- a/arch/arm/mach-s3c24xx/common.h +++ b/arch/arm/mach-s3c24xx/common.h @@ -67,16 +67,15 @@ extern struct syscore_ops s3c2416_irq_syscore_ops; #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) extern void s3c244x_map_io(void); extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s3c244x_init_clocks(int xtal); extern void s3c244x_restart(enum reboot_mode mode, const char *cmd); #else -#define s3c244x_init_clocks NULL #define s3c244x_init_uarts NULL #endif #ifdef CONFIG_CPU_S3C2440 extern int s3c2440_init(void); extern void s3c2440_map_io(void); +extern void s3c2440_init_clocks(int xtal); extern void s3c2440_init_irq(void); #else #define s3c2440_init NULL @@ -86,6 +85,7 @@ extern void s3c2440_init_irq(void); #ifdef CONFIG_CPU_S3C2442 extern int s3c2442_init(void); extern void s3c2442_map_io(void); +extern void s3c2442_init_clocks(int xtal); extern void s3c2442_init_irq(void); #else #define s3c2442_init NULL @@ -114,4 +114,21 @@ extern struct platform_device s3c2412_device_dma; extern struct platform_device s3c2440_device_dma; extern struct platform_device s3c2443_device_dma; +extern struct platform_device s3c2410_device_dclk; + +#ifdef CONFIG_S3C2410_COMMON_CLK +void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f, + int current_soc, + void __iomem *reg_base); +#endif +#ifdef CONFIG_S3C2412_COMMON_CLK +void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f, + unsigned long ext_f, void __iomem *reg_base); +#endif +#ifdef CONFIG_S3C2443_COMMON_CLK +void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f, + int current_soc, + void __iomem *reg_base); +#endif + #endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */ diff --git a/arch/arm/mach-s3c24xx/cpufreq-utils.c b/arch/arm/mach-s3c24xx/cpufreq-utils.c index 2a0aa5684e72..d4d9514335f4 100644 --- a/arch/arm/mach-s3c24xx/cpufreq-utils.c +++ b/arch/arm/mach-s3c24xx/cpufreq-utils.c @@ -14,6 +14,7 @@ #include <linux/errno.h> #include <linux/cpufreq.h> #include <linux/io.h> +#include <linux/clk.h> #include <mach/map.h> #include <mach/regs-clock.h> @@ -60,5 +61,6 @@ void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) */ void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg) { - __raw_writel(cfg->pll.driver_data, S3C2410_MPLLCON); + if (!IS_ERR(cfg->mpll)) + clk_set_rate(cfg->mpll, cfg->pll.frequency); } diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-clock.h b/arch/arm/mach-s3c24xx/include/mach/regs-clock.h index 3415b60082d7..3db6c10de023 100644 --- a/arch/arm/mach-s3c24xx/include/mach/regs-clock.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-clock.h @@ -42,24 +42,6 @@ #define S3C2410_CLKCON_IIS (1<<17) #define S3C2410_CLKCON_SPI (1<<18) -/* DCLKCON register addresses in gpio.h */ - -#define S3C2410_DCLKCON_DCLK0EN (1<<0) -#define S3C2410_DCLKCON_DCLK0_PCLK (0<<1) -#define S3C2410_DCLKCON_DCLK0_UCLK (1<<1) -#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4) -#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8) -#define S3C2410_DCLKCON_DCLK0_DIV_MASK ((0xf)<<4) -#define S3C2410_DCLKCON_DCLK0_CMP_MASK ((0xf)<<8) - -#define S3C2410_DCLKCON_DCLK1EN (1<<16) -#define S3C2410_DCLKCON_DCLK1_PCLK (0<<17) -#define S3C2410_DCLKCON_DCLK1_UCLK (1<<17) -#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20) -#define S3C2410_DCLKCON_DCLK1_CMP(x) (((x) - 1) <<24) -#define S3C2410_DCLKCON_DCLK1_DIV_MASK ((0xf) <<20) -#define S3C2410_DCLKCON_DCLK1_CMP_MASK ((0xf) <<24) - #define S3C2410_CLKDIVN_PDIVN (1<<0) #define S3C2410_CLKDIVN_HDIVN (1<<1) diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h index c2ef016032ab..c6583cfa5835 100644 --- a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h @@ -457,9 +457,6 @@ /* miscellaneous control */ #define S3C2410_MISCCR S3C2410_GPIOREG(0x80) -#define S3C2410_DCLKCON S3C2410_GPIOREG(0x84) - -#define S3C24XX_DCLKCON S3C24XX_GPIOREG2(0x84) /* see clock.h for dclk definitions */ diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c index 8ac9554aa996..5157e250dd13 100644 --- a/arch/arm/mach-s3c24xx/mach-amlm5900.c +++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c @@ -161,11 +161,16 @@ static struct platform_device *amlm5900_devices[] __initdata = { static void __init amlm5900_map_io(void) { s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init amlm5900_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + #ifdef CONFIG_FB_S3C2410 static struct s3c2410fb_display __initdata amlm5900_lcd_info = { .width = 160, @@ -241,6 +246,6 @@ MACHINE_START(AML_M5900, "AML_M5900") .map_io = amlm5900_map_io, .init_irq = s3c2410_init_irq, .init_machine = amlm5900_init, - .init_time = samsung_timer_init, + .init_time = amlm5900_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c index 81a270af2336..e053581cab0b 100644 --- a/arch/arm/mach-s3c24xx/mach-anubis.c +++ b/arch/arm/mach-s3c24xx/mach-anubis.c @@ -46,7 +46,6 @@ #include <net/ax88796.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/asoc-s3c24xx_simtec.h> @@ -352,6 +351,7 @@ static struct platform_device anubis_device_sm501 = { /* Standard Anubis devices */ static struct platform_device *anubis_devices[] __initdata = { + &s3c2410_device_dclk, &s3c_device_ohci, &s3c_device_wdt, &s3c_device_adc, @@ -364,14 +364,6 @@ static struct platform_device *anubis_devices[] __initdata = { &anubis_device_sm501, }; -static struct clk *anubis_clocks[] __initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; - /* I2C devices. */ static struct i2c_board_info anubis_i2c_devs[] __initdata = { @@ -394,23 +386,7 @@ static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = { static void __init anubis_map_io(void) { - /* initialise the clocks */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate = 12*1000*1000; - - s3c24xx_dclk1.parent = &clk_upll; - s3c24xx_dclk1.rate = 24*1000*1000; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - - s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks)); - s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); @@ -428,6 +404,12 @@ static void __init anubis_map_io(void) } } +static void __init anubis_init_time(void) +{ + s3c2440_init_clocks(12000000); + samsung_timer_init(); +} + static void __init anubis_init(void) { s3c_i2c0_set_platdata(NULL); @@ -447,6 +429,6 @@ MACHINE_START(ANUBIS, "Simtec-Anubis") .map_io = anubis_map_io, .init_machine = anubis_init, .init_irq = s3c2440_init_irq, - .init_time = samsung_timer_init, + .init_time = anubis_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c index d8f6bb1096cb..9db768f448a5 100644 --- a/arch/arm/mach-s3c24xx/mach-at2440evb.c +++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c @@ -45,7 +45,6 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/mmc-s3cmci.h> @@ -192,11 +191,16 @@ static struct platform_device *at2440evb_devices[] __initdata = { static void __init at2440evb_map_io(void) { s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc)); - s3c24xx_init_clocks(16934400); s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init at2440evb_init_time(void) +{ + s3c2440_init_clocks(16934400); + samsung_timer_init(); +} + static void __init at2440evb_init(void) { s3c24xx_fb_set_platdata(&at2440evb_fb_info); @@ -213,6 +217,6 @@ MACHINE_START(AT2440EVB, "AT2440EVB") .map_io = at2440evb_map_io, .init_machine = at2440evb_init, .init_irq = s3c2440_init_irq, - .init_time = samsung_timer_init, + .init_time = at2440evb_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c index e371ff53a408..f9112b801a33 100644 --- a/arch/arm/mach-s3c24xx/mach-bast.c +++ b/arch/arm/mach-s3c24xx/mach-bast.c @@ -51,7 +51,6 @@ #include <mach/regs-lcd.h> #include <mach/gpio-samsung.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/cpu-freq.h> #include <plat/devs.h> @@ -523,6 +522,7 @@ static struct s3c_hwmon_pdata bast_hwmon_info = { // cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0 static struct platform_device *bast_devices[] __initdata = { + &s3c2410_device_dclk, &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, @@ -537,14 +537,6 @@ static struct platform_device *bast_devices[] __initdata = { &bast_sio, }; -static struct clk *bast_clocks[] __initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; - static struct s3c_cpufreq_board __initdata bast_cpufreq = { .refresh = 7800, /* 7.8usec */ .auto_io = 1, @@ -558,29 +550,19 @@ static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = { static void __init bast_map_io(void) { - /* initialise the clocks */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate = 12*1000*1000; - - s3c24xx_dclk1.parent = &clk_upll; - s3c24xx_dclk1.rate = 24*1000*1000; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - - s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks)); - s3c_hwmon_set_platdata(&bast_hwmon_info); s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init bast_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + static void __init bast_init(void) { register_syscore_ops(&bast_pm_syscore_ops); @@ -608,6 +590,6 @@ MACHINE_START(BAST, "Simtec-BAST") .map_io = bast_map_io, .init_irq = s3c2410_init_irq, .init_machine = bast_init, - .init_time = samsung_timer_init, + .init_time = bast_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index dc4db849f0fd..fc3a08d0cb3f 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -501,7 +501,6 @@ static struct platform_device gta02_buttons_device = { static void __init gta02_map_io(void) { s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } @@ -585,6 +584,11 @@ static void __init gta02_machine_init(void) regulator_has_full_constraints(); } +static void __init gta02_init_time(void) +{ + s3c2442_init_clocks(12000000); + samsung_timer_init(); +} MACHINE_START(NEO1973_GTA02, "GTA02") /* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */ @@ -592,6 +596,6 @@ MACHINE_START(NEO1973_GTA02, "GTA02") .map_io = gta02_map_io, .init_irq = s3c2442_init_irq, .init_machine = gta02_machine_init, - .init_time = samsung_timer_init, + .init_time = gta02_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index e453acd92cbf..fbf5487ae5d1 100644 --- a/arch/arm/mach-s3c24xx/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c @@ -57,7 +57,6 @@ #include <mach/regs-lcd.h> #include <mach/gpio-samsung.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/gpio-cfg.h> @@ -646,7 +645,6 @@ static struct platform_device *h1940_devices[] __initdata = { static void __init h1940_map_io(void) { s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); @@ -662,6 +660,12 @@ static void __init h1940_map_io(void) WARN_ON(gpiochip_add(&h1940_latch_gpiochip)); } +static void __init h1940_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + /* H1940 and RX3715 need to reserve this for suspend */ static void __init h1940_reserve(void) { @@ -739,6 +743,6 @@ MACHINE_START(H1940, "IPAQ-H1940") .reserve = h1940_reserve, .init_irq = s3c2410_init_irq, .init_machine = h1940_init, - .init_time = samsung_timer_init, + .init_time = h1940_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index 5faa7239e7d6..e81ea82c55f9 100644 --- a/arch/arm/mach-s3c24xx/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c @@ -507,11 +507,16 @@ static struct syscore_ops jive_pm_syscore_ops = { static void __init jive_map_io(void) { s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init jive_init_time(void) +{ + s3c2412_init_clocks(12000000); + samsung_timer_init(); +} + static void jive_power_off(void) { printk(KERN_INFO "powering system down...\n"); @@ -665,6 +670,6 @@ MACHINE_START(JIVE, "JIVE") .init_irq = s3c2412_init_irq, .map_io = jive_map_io, .init_machine = jive_machine_init, - .init_time = samsung_timer_init, + .init_time = jive_init_time, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index 9e57fd9f4f3b..5cc40ec1d254 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -54,7 +54,6 @@ #include <linux/mtd/partitions.h> #include <plat/gpio-cfg.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/samsung-time.h> @@ -525,11 +524,16 @@ static struct platform_device *mini2440_devices[] __initdata = { static void __init mini2440_map_io(void) { s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init mini2440_init_time(void) +{ + s3c2440_init_clocks(12000000); + samsung_timer_init(); +} + /* * mini2440_features string * @@ -690,6 +694,6 @@ MACHINE_START(MINI2440, "MINI2440") .map_io = mini2440_map_io, .init_machine = mini2440_init, .init_irq = s3c2440_init_irq, - .init_time = samsung_timer_init, + .init_time = mini2440_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c index 4cccaad34847..3ac2a54348d6 100644 --- a/arch/arm/mach-s3c24xx/mach-n30.c +++ b/arch/arm/mach-s3c24xx/mach-n30.c @@ -45,7 +45,6 @@ #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <linux/platform_data/mmc-s3cmci.h> @@ -535,11 +534,16 @@ static void __init n30_map_io(void) { s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc)); n30_hwinit(); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init n30_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + /* GPB3 is the line that controls the pull-up for the USB D+ line */ static void __init n30_init(void) @@ -591,7 +595,7 @@ MACHINE_START(N30, "Acer-N30") Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, - .init_time = samsung_timer_init, + .init_time = n30_init_time, .init_machine = n30_init, .init_irq = s3c2410_init_irq, .map_io = n30_map_io, @@ -602,7 +606,7 @@ MACHINE_START(N35, "Acer-N35") /* Maintainer: Christer Weinigel <christer@weinigel.se> */ .atag_offset = 0x100, - .init_time = samsung_timer_init, + .init_time = n30_init_time, .init_machine = n30_init, .init_irq = s3c2410_init_irq, .map_io = n30_map_io, diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c index 3066851f584d..c82c281ce351 100644 --- a/arch/arm/mach-s3c24xx/mach-nexcoder.c +++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c @@ -42,7 +42,6 @@ #include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/samsung-time.h> @@ -135,13 +134,18 @@ static void __init nexcoder_sensorboard_init(void) static void __init nexcoder_map_io(void) { s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); nexcoder_sensorboard_init(); } +static void __init nexcoder_init_time(void) +{ + s3c2440_init_clocks(12000000); + samsung_timer_init(); +} + static void __init nexcoder_init(void) { s3c_i2c0_set_platdata(NULL); @@ -154,6 +158,6 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440") .map_io = nexcoder_map_io, .init_machine = nexcoder_init, .init_irq = s3c2440_init_irq, - .init_time = samsung_timer_init, + .init_time = nexcoder_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c index a4ae4bb3666d..189147b80eca 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris.c +++ b/arch/arm/mach-s3c24xx/mach-osiris.c @@ -40,7 +40,6 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/cpu-freq.h> #include <plat/devs.h> @@ -344,20 +343,13 @@ static struct i2c_board_info osiris_i2c_devs[] __initdata = { /* Standard Osiris devices */ static struct platform_device *osiris_devices[] __initdata = { + &s3c2410_device_dclk, &s3c_device_i2c0, &s3c_device_wdt, &s3c_device_nand, &osiris_pcmcia, }; -static struct clk *osiris_clocks[] __initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; - static struct s3c_cpufreq_board __initdata osiris_cpufreq = { .refresh = 7800, /* refresh period is 7.8usec */ .auto_io = 1, @@ -368,23 +360,7 @@ static void __init osiris_map_io(void) { unsigned long flags; - /* initialise the clocks */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate = 12*1000*1000; - - s3c24xx_dclk1.parent = &clk_upll; - s3c24xx_dclk1.rate = 24*1000*1000; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - - s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks)); - s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); @@ -408,6 +384,12 @@ static void __init osiris_map_io(void) local_irq_restore(flags); } +static void __init osiris_init_time(void) +{ + s3c2440_init_clocks(12000000); + samsung_timer_init(); +} + static void __init osiris_init(void) { register_syscore_ops(&osiris_pm_syscore_ops); @@ -429,6 +411,6 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS") .map_io = osiris_map_io, .init_irq = s3c2440_init_irq, .init_machine = osiris_init, - .init_time = samsung_timer_init, + .init_time = osiris_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c index bdb3faac2d9b..45833001186d 100644 --- a/arch/arm/mach-s3c24xx/mach-otom.c +++ b/arch/arm/mach-s3c24xx/mach-otom.c @@ -30,7 +30,6 @@ #include <mach/hardware.h> #include <mach/regs-gpio.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/samsung-time.h> @@ -100,11 +99,16 @@ static struct platform_device *otom11_devices[] __initdata = { static void __init otom11_map_io(void) { s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init otom11_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + static void __init otom11_init(void) { s3c_i2c0_set_platdata(NULL); @@ -117,6 +121,6 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1") .map_io = otom11_map_io, .init_machine = otom11_init, .init_irq = s3c2410_init_irq, - .init_time = samsung_timer_init, + .init_time = otom11_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index 8c12787a8fd3..228c9094519d 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -304,11 +304,16 @@ __setup("tft=", qt2410_tft_setup); static void __init qt2410_map_io(void) { s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc)); - s3c24xx_init_clocks(12*1000*1000); s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init qt2410_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + static void __init qt2410_machine_init(void) { s3c_nand_set_platdata(&qt2410_nand_info); @@ -346,6 +351,6 @@ MACHINE_START(QT2410, "QT2410") .map_io = qt2410_map_io, .init_irq = s3c2410_init_irq, .init_machine = qt2410_machine_init, - .init_time = samsung_timer_init, + .init_time = qt2410_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index afb784e934c8..e2c6541909c1 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -54,7 +54,6 @@ #include <mach/regs-lcd.h> #include <mach/gpio-samsung.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/pm.h> @@ -710,6 +709,7 @@ static struct i2c_board_info rx1950_i2c_devices[] = { }; static struct platform_device *rx1950_devices[] __initdata = { + &s3c2410_device_dclk, &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c0, @@ -728,20 +728,9 @@ static struct platform_device *rx1950_devices[] __initdata = { &rx1950_leds, }; -static struct clk *rx1950_clocks[] __initdata = { - &s3c24xx_clkout0, - &s3c24xx_clkout1, -}; - static void __init rx1950_map_io(void) { - s3c24xx_clkout0.parent = &clk_h; - s3c24xx_clkout1.parent = &clk_f; - - s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks)); - s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc)); - s3c24xx_init_clocks(16934000); s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); @@ -754,6 +743,12 @@ static void __init rx1950_map_io(void) s3c_pm_init(); } +static void __init rx1950_init_time(void) +{ + s3c2442_init_clocks(16934000); + samsung_timer_init(); +} + static void __init rx1950_init_machine(void) { int i; @@ -816,6 +811,6 @@ MACHINE_START(RX1950, "HP iPAQ RX1950") .reserve = rx1950_reserve, .init_irq = s3c2442_init_irq, .init_machine = rx1950_init_machine, - .init_time = samsung_timer_init, + .init_time = rx1950_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c index e6535ce1bc5c..6e749ec3a2ea 100644 --- a/arch/arm/mach-s3c24xx/mach-rx3715.c +++ b/arch/arm/mach-s3c24xx/mach-rx3715.c @@ -46,7 +46,6 @@ #include <mach/regs-lcd.h> #include <mach/gpio-samsung.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/pm.h> @@ -179,11 +178,16 @@ static struct platform_device *rx3715_devices[] __initdata = { static void __init rx3715_map_io(void) { s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc)); - s3c24xx_init_clocks(16934000); s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init rx3715_init_time(void) +{ + s3c2440_init_clocks(16934000); + samsung_timer_init(); +} + /* H1940 and RX3715 need to reserve this for suspend */ static void __init rx3715_reserve(void) { @@ -210,6 +214,6 @@ MACHINE_START(RX3715, "IPAQ-RX3715") .reserve = rx3715_reserve, .init_irq = s3c2440_init_irq, .init_machine = rx3715_init_machine, - .init_time = samsung_timer_init, + .init_time = rx3715_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c index 70f0900d4bca..e4dcb9aa2ca2 100644 --- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c +++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c @@ -18,7 +18,6 @@ #include <linux/clocksource.h> #include <linux/irqchip.h> #include <linux/of_platform.h> -#include <linux/serial_core.h> #include <linux/serial_s3c.h> #include <asm/mach/arch.h> @@ -29,48 +28,14 @@ #include "common.h" -/* - * The following lookup table is used to override device names when devices - * are registered from device tree. This is temporarily added to enable - * device tree support addition for the S3C2416 architecture. - * - * For drivers that require platform data to be provided from the machine - * file, a platform data pointer can also be supplied along with the - * devices names. Usually, the platform data elements that cannot be parsed - * from the device tree by the drivers (example: function pointers) are - * supplied. But it should be noted that this is a temporary mechanism and - * at some point, the drivers should be capable of parsing all the platform - * data from the device tree. - */ -static const struct of_dev_auxdata s3c2416_auxdata_lookup[] __initconst = { - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART, - "s3c2440-uart.0", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x4000, - "s3c2440-uart.1", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x8000, - "s3c2440-uart.2", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0xC000, - "s3c2440-uart.3", NULL), - OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC0, - "s3c-sdhci.0", NULL), - OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC1, - "s3c-sdhci.1", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", S3C_PA_IIC, - "s3c2440-i2c.0", NULL), - {}, -}; - static void __init s3c2416_dt_map_io(void) { s3c24xx_init_io(NULL, 0); - s3c24xx_init_clocks(12000000); } static void __init s3c2416_dt_machine_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, - s3c2416_auxdata_lookup, NULL); - + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); s3c_pm_init(); } @@ -86,6 +51,5 @@ DT_MACHINE_START(S3C2416_DT, "Samsung S3C2416 (Flattened Device Tree)") .map_io = s3c2416_dt_map_io, .init_irq = irqchip_init, .init_machine = s3c2416_dt_machine_init, - .init_time = clocksource_of_init, .restart = s3c2416_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c index f32924ee0e9f..419fadd6e446 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2410.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c @@ -99,11 +99,16 @@ static struct platform_device *smdk2410_devices[] __initdata = { static void __init smdk2410_map_io(void) { s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init smdk2410_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + static void __init smdk2410_init(void) { s3c_i2c0_set_platdata(NULL); @@ -118,6 +123,6 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc .map_io = smdk2410_map_io, .init_irq = s3c2410_init_irq, .init_machine = smdk2410_init, - .init_time = samsung_timer_init, + .init_time = smdk2410_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c index 233fe52d2015..a38f8a049e22 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2413.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c @@ -106,11 +106,16 @@ static void __init smdk2413_fixup(struct tag *tags, char **cmdline, static void __init smdk2413_map_io(void) { s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init smdk2413_init_time(void) +{ + s3c2412_init_clocks(12000000); + samsung_timer_init(); +} + static void __init smdk2413_machine_init(void) { /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ @@ -159,6 +164,6 @@ MACHINE_START(SMDK2413, "SMDK2413") .init_irq = s3c2412_init_irq, .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, - .init_time = samsung_timer_init, + .init_time = smdk2413_init_time, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c index b3b54d8e1410..fa6f30d23601 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2416.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c @@ -219,10 +219,15 @@ static struct platform_device *smdk2416_devices[] __initdata = { &s3c2443_device_dma, }; +static void __init smdk2416_init_time(void) +{ + s3c2416_init_clocks(12000000); + samsung_timer_init(); +} + static void __init smdk2416_map_io(void) { s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } @@ -257,6 +262,6 @@ MACHINE_START(SMDK2416, "SMDK2416") .init_irq = s3c2416_init_irq, .map_io = smdk2416_map_io, .init_machine = smdk2416_machine_init, - .init_time = samsung_timer_init, + .init_time = smdk2416_init_time, .restart = s3c2416_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c index d071dcfea548..5fb89c0ae17a 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2440.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c @@ -38,7 +38,6 @@ #include <mach/fb.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/samsung-time.h> @@ -159,11 +158,16 @@ static struct platform_device *smdk2440_devices[] __initdata = { static void __init smdk2440_map_io(void) { s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc)); - s3c24xx_init_clocks(16934400); s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init smdk2440_init_time(void) +{ + s3c2440_init_clocks(16934400); + samsung_timer_init(); +} + static void __init smdk2440_machine_init(void) { s3c24xx_fb_set_platdata(&smdk2440_fb_info); @@ -180,6 +184,6 @@ MACHINE_START(S3C2440, "SMDK2440") .init_irq = s3c2440_init_irq, .map_io = smdk2440_map_io, .init_machine = smdk2440_machine_init, - .init_time = samsung_timer_init, + .init_time = smdk2440_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c index 06c4d77de3a5..ef5d5ea33182 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2443.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c @@ -121,11 +121,16 @@ static struct platform_device *smdk2443_devices[] __initdata = { static void __init smdk2443_map_io(void) { s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init smdk2443_init_time(void) +{ + s3c2443_init_clocks(12000000); + samsung_timer_init(); +} + static void __init smdk2443_machine_init(void) { s3c_i2c0_set_platdata(NULL); @@ -145,6 +150,6 @@ MACHINE_START(SMDK2443, "SMDK2443") .init_irq = s3c2443_init_irq, .map_io = smdk2443_map_io, .init_machine = smdk2443_machine_init, - .init_time = samsung_timer_init, + .init_time = smdk2443_init_time, .restart = s3c2443_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c index 4108b2f0cede..c616ca2d409e 100644 --- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c +++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c @@ -135,11 +135,16 @@ static struct platform_device *tct_hammer_devices[] __initdata = { static void __init tct_hammer_map_io(void) { s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init tct_hammer_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + static void __init tct_hammer_init(void) { s3c_i2c0_set_platdata(NULL); @@ -151,6 +156,6 @@ MACHINE_START(TCT_HAMMER, "TCT_HAMMER") .map_io = tct_hammer_map_io, .init_irq = s3c2410_init_irq, .init_machine = tct_hammer_init, - .init_time = samsung_timer_init, + .init_time = tct_hammer_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c index 1cc5b1bd51cd..f88c584c3001 100644 --- a/arch/arm/mach-s3c24xx/mach-vr1000.c +++ b/arch/arm/mach-s3c24xx/mach-vr1000.c @@ -43,7 +43,6 @@ #include <mach/regs-gpio.h> #include <mach/gpio-samsung.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/samsung-time.h> @@ -286,6 +285,7 @@ static struct i2c_board_info vr1000_i2c_devs[] __initdata = { /* devices for this board */ static struct platform_device *vr1000_devices[] __initdata = { + &s3c2410_device_dclk, &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, @@ -299,14 +299,6 @@ static struct platform_device *vr1000_devices[] __initdata = { &vr1000_led3, }; -static struct clk *vr1000_clocks[] __initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; - static void vr1000_power_off(void) { gpio_direction_output(S3C2410_GPB(9), 1); @@ -314,29 +306,19 @@ static void vr1000_power_off(void) static void __init vr1000_map_io(void) { - /* initialise clock sources */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate = 12*1000*1000; - - s3c24xx_dclk1.parent = NULL; - s3c24xx_dclk1.rate = 3692307; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - - s3c24xx_register_clocks(vr1000_clocks, ARRAY_SIZE(vr1000_clocks)); - pm_power_off = vr1000_power_off; s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init vr1000_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + static void __init vr1000_init(void) { s3c_i2c0_set_platdata(NULL); @@ -357,6 +339,6 @@ MACHINE_START(VR1000, "Thorcom-VR1000") .map_io = vr1000_map_io, .init_machine = vr1000_init, .init_irq = s3c2410_init_irq, - .init_time = samsung_timer_init, + .init_time = vr1000_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c index 40868c0e0a68..6b706c915387 100644 --- a/arch/arm/mach-s3c24xx/mach-vstms.c +++ b/arch/arm/mach-s3c24xx/mach-vstms.c @@ -142,11 +142,16 @@ static void __init vstms_fixup(struct tag *tags, char **cmdline, static void __init vstms_map_io(void) { s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init vstms_init_time(void) +{ + s3c2412_init_clocks(12000000); + samsung_timer_init(); +} + static void __init vstms_init(void) { s3c_i2c0_set_platdata(NULL); @@ -162,6 +167,6 @@ MACHINE_START(VSTMS, "VSTMS") .init_irq = s3c2412_init_irq, .init_machine = vstms_init, .map_io = vstms_map_io, - .init_time = samsung_timer_init, + .init_time = vstms_init_time, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c index 68ea5b7e5dc7..b19256ec8d40 100644 --- a/arch/arm/mach-s3c24xx/pm.c +++ b/arch/arm/mach-s3c24xx/pm.c @@ -51,9 +51,6 @@ #define PFX "s3c24xx-pm: " static struct sleep_save core_save[] = { - SAVE_ITEM(S3C2410_LOCKTIME), - SAVE_ITEM(S3C2410_CLKCON), - /* we restore the timings here, with the proviso that the board * brings the system up in an slower, or equal frequency setting * to the original system. @@ -69,18 +66,6 @@ static struct sleep_save core_save[] = { SAVE_ITEM(S3C2410_BANKCON3), SAVE_ITEM(S3C2410_BANKCON4), SAVE_ITEM(S3C2410_BANKCON5), - -#ifndef CONFIG_CPU_FREQ - SAVE_ITEM(S3C2410_CLKDIVN), - SAVE_ITEM(S3C2410_MPLLCON), - SAVE_ITEM(S3C2410_REFRESH), -#endif - SAVE_ITEM(S3C2410_UPLLCON), - SAVE_ITEM(S3C2410_CLKSLOW), -}; - -static struct sleep_save misc_save[] = { - SAVE_ITEM(S3C2410_DCLKCON), }; /* s3c_pm_check_resume_pin @@ -140,12 +125,10 @@ void s3c_pm_configure_extint(void) void s3c_pm_restore_core(void) { s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save)); - s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save)); } void s3c_pm_save_core(void) { - s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save)); s3c_pm_do_save(core_save, ARRAY_SIZE(core_save)); } diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c index 04b58cb49888..7eab88829883 100644 --- a/arch/arm/mach-s3c24xx/s3c2410.c +++ b/arch/arm/mach-s3c24xx/s3c2410.c @@ -85,62 +85,6 @@ void __init s3c2410_map_io(void) void __init_or_cpufreq s3c2410_setup_clocks(void) { - struct clk *xtal_clk; - unsigned long tmp; - unsigned long xtal; - unsigned long fclk; - unsigned long hclk; - unsigned long pclk; - - xtal_clk = clk_get(NULL, "xtal"); - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - /* now we've got our machine bits initialised, work out what - * clocks we've got */ - - fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal); - - tmp = __raw_readl(S3C2410_CLKDIVN); - - /* work out clock scalings */ - - hclk = fclk / ((tmp & S3C2410_CLKDIVN_HDIVN) ? 2 : 1); - pclk = hclk / ((tmp & S3C2410_CLKDIVN_PDIVN) ? 2 : 1); - - /* print brieft summary of clocks, etc */ - - printk("S3C2410: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", - print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); - - /* initialise the clocks here, to allow other things like the - * console to use them - */ - - s3c24xx_setup_clocks(fclk, hclk, pclk); -} - -/* fake ARMCLK for use with cpufreq, etc. */ - -static struct clk s3c2410_armclk = { - .name = "armclk", - .parent = &clk_f, - .id = -1, -}; - -static struct clk_lookup s3c2410_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), -}; - -void __init s3c2410_init_clocks(int xtal) -{ - s3c24xx_register_baseclocks(xtal); - s3c2410_setup_clocks(); - s3c2410_baseclk_add(); - s3c24xx_register_clock(&s3c2410_armclk); - clkdev_add_table(s3c2410_clk_lookup, ARRAY_SIZE(s3c2410_clk_lookup)); - samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); } struct bus_type s3c2410_subsys = { diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c index 657cbaca80ac..d49f52fbc842 100644 --- a/arch/arm/mach-s3c24xx/s3c2412.c +++ b/arch/arm/mach-s3c24xx/s3c2412.c @@ -173,49 +173,6 @@ void __init s3c2412_map_io(void) void __init_or_cpufreq s3c2412_setup_clocks(void) { - struct clk *xtal_clk; - unsigned long tmp; - unsigned long xtal; - unsigned long fclk; - unsigned long hclk; - unsigned long pclk; - - xtal_clk = clk_get(NULL, "xtal"); - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - /* now we've got our machine bits initialised, work out what - * clocks we've got */ - - fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal * 2); - - clk_mpll.rate = fclk; - - tmp = __raw_readl(S3C2410_CLKDIVN); - - /* work out clock scalings */ - - hclk = fclk / ((tmp & S3C2412_CLKDIVN_HDIVN_MASK) + 1); - hclk /= ((tmp & S3C2412_CLKDIVN_ARMDIVN) ? 2 : 1); - pclk = hclk / ((tmp & S3C2412_CLKDIVN_PDIVN) ? 2 : 1); - - /* print brieft summary of clocks, etc */ - - printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", - print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); - - s3c24xx_setup_clocks(fclk, hclk, pclk); -} - -void __init s3c2412_init_clocks(int xtal) -{ - /* initialise the clocks here, to allow other things like the - * console to use them - */ - - s3c24xx_register_baseclocks(xtal); - s3c2412_setup_clocks(); - s3c2412_baseclk_add(); } /* need to register the subsystem before we actually register the device, and diff --git a/arch/arm/mach-s3c24xx/s3c2442.c b/arch/arm/mach-s3c24xx/s3c2442.c index 2c8adc028538..fb9da2b603a2 100644 --- a/arch/arm/mach-s3c24xx/s3c2442.c +++ b/arch/arm/mach-s3c24xx/s3c2442.c @@ -53,117 +53,6 @@ #include "common.h" -/* S3C2442 extended clock support */ - -static unsigned long s3c2442_camif_upll_round(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - div = parent_rate / rate; - - if (div == 3) - return parent_rate / 3; - - /* note, we remove the +/- 1 calculations for the divisor */ - - div /= 2; - - if (div < 1) - div = 1; - else if (div > 16) - div = 16; - - return parent_rate / (div * 2); -} - -static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - - rate = s3c2442_camif_upll_round(clk, rate); - - camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3; - - if (rate == parent_rate) { - camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL; - } else if ((parent_rate / rate) == 3) { - camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; - camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3; - } else { - camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK; - camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; - camdivn |= (((parent_rate / rate) / 2) - 1); - } - - __raw_writel(camdivn, S3C2440_CAMDIVN); - - return 0; -} - -/* Extra S3C2442 clocks */ - -static struct clk s3c2442_clk_cam = { - .name = "camif", - .id = -1, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_CAMERA, -}; - -static struct clk s3c2442_clk_cam_upll = { - .name = "camif-upll", - .id = -1, - .ops = &(struct clk_ops) { - .set_rate = s3c2442_camif_upll_setrate, - .round_rate = s3c2442_camif_upll_round, - }, -}; - -static int s3c2442_clk_add(struct device *dev, struct subsys_interface *sif) -{ - struct clk *clock_upll; - struct clk *clock_h; - struct clk *clock_p; - - clock_p = clk_get(NULL, "pclk"); - clock_h = clk_get(NULL, "hclk"); - clock_upll = clk_get(NULL, "upll"); - - if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) { - printk(KERN_ERR "S3C2442: Failed to get parent clocks\n"); - return -EINVAL; - } - - s3c2442_clk_cam.parent = clock_h; - s3c2442_clk_cam_upll.parent = clock_upll; - - s3c24xx_register_clock(&s3c2442_clk_cam); - s3c24xx_register_clock(&s3c2442_clk_cam_upll); - - clk_disable(&s3c2442_clk_cam); - - return 0; -} - -static struct subsys_interface s3c2442_clk_interface = { - .name = "s3c2442_clk", - .subsys = &s3c2442_subsys, - .add_dev = s3c2442_clk_add, -}; - -static __init int s3c2442_clk_init(void) -{ - return subsys_interface_register(&s3c2442_clk_interface); -} - -arch_initcall(s3c2442_clk_init); - - static struct device s3c2442_dev = { .bus = &s3c2442_subsys, }; diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c index fe30ebb234d2..4a64bcc9eb51 100644 --- a/arch/arm/mach-s3c24xx/s3c244x.c +++ b/arch/arm/mach-s3c24xx/s3c244x.c @@ -46,6 +46,7 @@ #include <plat/nand-core.h> #include <plat/watchdog-reset.h> +#include "common.h" #include "regs-dsc.h" static struct map_desc s3c244x_iodesc[] __initdata = { @@ -74,67 +75,11 @@ void __init s3c244x_map_io(void) s3c_nand_setname("s3c2440-nand"); s3c_device_ts.name = "s3c2440-ts"; s3c_device_usbgadget.name = "s3c2440-usbgadget"; + s3c2410_device_dclk.name = "s3c2440-dclk"; } void __init_or_cpufreq s3c244x_setup_clocks(void) { - struct clk *xtal_clk; - unsigned long clkdiv; - unsigned long camdiv; - unsigned long xtal; - unsigned long hclk, fclk, pclk; - int hdiv = 1; - - xtal_clk = clk_get(NULL, "xtal"); - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2; - - clkdiv = __raw_readl(S3C2410_CLKDIVN); - camdiv = __raw_readl(S3C2440_CAMDIVN); - - /* work out clock scalings */ - - switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) { - case S3C2440_CLKDIVN_HDIVN_1: - hdiv = 1; - break; - - case S3C2440_CLKDIVN_HDIVN_2: - hdiv = 2; - break; - - case S3C2440_CLKDIVN_HDIVN_4_8: - hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4; - break; - - case S3C2440_CLKDIVN_HDIVN_3_6: - hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3; - break; - } - - hclk = fclk / hdiv; - pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1); - - /* print brief summary of clocks, etc */ - - printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", - print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); - - s3c24xx_setup_clocks(fclk, hclk, pclk); -} - -void __init s3c244x_init_clocks(int xtal) -{ - /* initialise the clocks here, to allow other things like the - * console to use them, and to add new ones after the initialisation - */ - - s3c24xx_register_baseclocks(xtal); - s3c244x_setup_clocks(); - s3c2410_baseclk_add(); - samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); } /* Since the S3C2442 and S3C2440 share items, put both subsystems here */ diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h index 7231c8e4975e..72d4178ad23b 100644 --- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h @@ -119,6 +119,7 @@ struct s3c_plltab { struct s3c_cpufreq_config { struct s3c_freq freq; struct s3c_freq max; + struct clk *mpll; struct cpufreq_frequency_table pll; struct s3c_clkdivs divs; struct s3c_cpufreq_info *info; /* for core, not drivers */ diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 6f56d3a4f010..ba2436622645 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -115,3 +115,5 @@ endmenu source "drivers/clk/bcm/Kconfig" source "drivers/clk/mvebu/Kconfig" + +source "drivers/clk/samsung/Kconfig" diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 5f8a28735c96..17d7f13d19a5 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -41,7 +41,7 @@ obj-$(CONFIG_PLAT_ORION) += mvebu/ obj-$(CONFIG_ARCH_MXS) += mxs/ obj-$(CONFIG_COMMON_CLK_QCOM) += qcom/ obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/ -obj-$(CONFIG_PLAT_SAMSUNG) += samsung/ +obj-$(CONFIG_COMMON_CLK_SAMSUNG) += samsung/ obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += shmobile/ obj-$(CONFIG_ARCH_SIRF) += sirf/ obj-$(CONFIG_ARCH_SOCFPGA) += socfpga/ diff --git a/drivers/clk/samsung/Kconfig b/drivers/clk/samsung/Kconfig new file mode 100644 index 000000000000..84196ecdaa12 --- /dev/null +++ b/drivers/clk/samsung/Kconfig @@ -0,0 +1,26 @@ +config COMMON_CLK_SAMSUNG + bool + select COMMON_CLK + +config S3C2410_COMMON_CLK + bool + select COMMON_CLK_SAMSUNG + help + Build the s3c2410 clock driver based on the common clock framework. + +config S3C2410_COMMON_DCLK + bool + select COMMON_CLK_SAMSUNG + select REGMAP_MMIO + help + Temporary symbol to build the dclk driver based on the common clock + framework. + +config S3C2412_COMMON_CLK + bool + select COMMON_CLK_SAMSUNG + +config S3C2443_COMMON_CLK + bool + select COMMON_CLK_SAMSUNG + diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile index 8eb4799237f0..25646c61a02b 100644 --- a/drivers/clk/samsung/Makefile +++ b/drivers/clk/samsung/Makefile @@ -3,9 +3,15 @@ # obj-$(CONFIG_COMMON_CLK) += clk.o clk-pll.o +obj-$(CONFIG_SOC_EXYNOS3250) += clk-exynos3250.o obj-$(CONFIG_ARCH_EXYNOS4) += clk-exynos4.o obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o +obj-$(CONFIG_SOC_EXYNOS5260) += clk-exynos5260.o obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5420.o obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-audss.o +obj-$(CONFIG_S3C2410_COMMON_CLK)+= clk-s3c2410.o +obj-$(CONFIG_S3C2410_COMMON_DCLK)+= clk-s3c2410-dclk.o +obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o +obj-$(CONFIG_S3C2443_COMMON_CLK)+= clk-s3c2443.o obj-$(CONFIG_ARCH_S3C64XX) += clk-s3c64xx.o diff --git a/drivers/clk/samsung/clk-exynos3250.c b/drivers/clk/samsung/clk-exynos3250.c new file mode 100644 index 000000000000..7a17bd40d1dd --- /dev/null +++ b/drivers/clk/samsung/clk-exynos3250.c @@ -0,0 +1,780 @@ +/* + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common Clock Framework support for Exynos3250 SoC. + */ + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/syscore_ops.h> + +#include <dt-bindings/clock/exynos3250.h> + +#include "clk.h" +#include "clk-pll.h" + +#define SRC_LEFTBUS 0x4200 +#define DIV_LEFTBUS 0x4500 +#define GATE_IP_LEFTBUS 0x4800 +#define SRC_RIGHTBUS 0x8200 +#define DIV_RIGHTBUS 0x8500 +#define GATE_IP_RIGHTBUS 0x8800 +#define GATE_IP_PERIR 0x8960 +#define MPLL_LOCK 0xc010 +#define MPLL_CON0 0xc110 +#define VPLL_LOCK 0xc020 +#define VPLL_CON0 0xc120 +#define UPLL_LOCK 0xc030 +#define UPLL_CON0 0xc130 +#define SRC_TOP0 0xc210 +#define SRC_TOP1 0xc214 +#define SRC_CAM 0xc220 +#define SRC_MFC 0xc228 +#define SRC_G3D 0xc22c +#define SRC_LCD 0xc234 +#define SRC_ISP 0xc238 +#define SRC_FSYS 0xc240 +#define SRC_PERIL0 0xc250 +#define SRC_PERIL1 0xc254 +#define SRC_MASK_TOP 0xc310 +#define SRC_MASK_CAM 0xc320 +#define SRC_MASK_LCD 0xc334 +#define SRC_MASK_ISP 0xc338 +#define SRC_MASK_FSYS 0xc340 +#define SRC_MASK_PERIL0 0xc350 +#define SRC_MASK_PERIL1 0xc354 +#define DIV_TOP 0xc510 +#define DIV_CAM 0xc520 +#define DIV_MFC 0xc528 +#define DIV_G3D 0xc52c +#define DIV_LCD 0xc534 +#define DIV_ISP 0xc538 +#define DIV_FSYS0 0xc540 +#define DIV_FSYS1 0xc544 +#define DIV_FSYS2 0xc548 +#define DIV_PERIL0 0xc550 +#define DIV_PERIL1 0xc554 +#define DIV_PERIL3 0xc55c +#define DIV_PERIL4 0xc560 +#define DIV_PERIL5 0xc564 +#define DIV_CAM1 0xc568 +#define CLKDIV2_RATIO 0xc580 +#define GATE_SCLK_CAM 0xc820 +#define GATE_SCLK_MFC 0xc828 +#define GATE_SCLK_G3D 0xc82c +#define GATE_SCLK_LCD 0xc834 +#define GATE_SCLK_ISP_TOP 0xc838 +#define GATE_SCLK_FSYS 0xc840 +#define GATE_SCLK_PERIL 0xc850 +#define GATE_IP_CAM 0xc920 +#define GATE_IP_MFC 0xc928 +#define GATE_IP_G3D 0xc92c +#define GATE_IP_LCD 0xc934 +#define GATE_IP_ISP 0xc938 +#define GATE_IP_FSYS 0xc940 +#define GATE_IP_PERIL 0xc950 +#define GATE_BLOCK 0xc970 +#define APLL_LOCK 0x14000 +#define APLL_CON0 0x14100 +#define SRC_CPU 0x14200 +#define DIV_CPU0 0x14500 +#define DIV_CPU1 0x14504 + +/* list of PLLs to be registered */ +enum exynos3250_plls { + apll, mpll, vpll, upll, + nr_plls +}; + +static void __iomem *reg_base; + +/* + * Support for CMU save/restore across system suspends + */ +#ifdef CONFIG_PM_SLEEP +static struct samsung_clk_reg_dump *exynos3250_clk_regs; + +static unsigned long exynos3250_cmu_clk_regs[] __initdata = { + SRC_LEFTBUS, + DIV_LEFTBUS, + GATE_IP_LEFTBUS, + SRC_RIGHTBUS, + DIV_RIGHTBUS, + GATE_IP_RIGHTBUS, + GATE_IP_PERIR, + MPLL_LOCK, + MPLL_CON0, + VPLL_LOCK, + VPLL_CON0, + UPLL_LOCK, + UPLL_CON0, + SRC_TOP0, + SRC_TOP1, + SRC_CAM, + SRC_MFC, + SRC_G3D, + SRC_LCD, + SRC_ISP, + SRC_FSYS, + SRC_PERIL0, + SRC_PERIL1, + SRC_MASK_TOP, + SRC_MASK_CAM, + SRC_MASK_LCD, + SRC_MASK_ISP, + SRC_MASK_FSYS, + SRC_MASK_PERIL0, + SRC_MASK_PERIL1, + DIV_TOP, + DIV_CAM, + DIV_MFC, + DIV_G3D, + DIV_LCD, + DIV_ISP, + DIV_FSYS0, + DIV_FSYS1, + DIV_FSYS2, + DIV_PERIL0, + DIV_PERIL1, + DIV_PERIL3, + DIV_PERIL4, + DIV_PERIL5, + DIV_CAM1, + CLKDIV2_RATIO, + GATE_SCLK_CAM, + GATE_SCLK_MFC, + GATE_SCLK_G3D, + GATE_SCLK_LCD, + GATE_SCLK_ISP_TOP, + GATE_SCLK_FSYS, + GATE_SCLK_PERIL, + GATE_IP_CAM, + GATE_IP_MFC, + GATE_IP_G3D, + GATE_IP_LCD, + GATE_IP_ISP, + GATE_IP_FSYS, + GATE_IP_PERIL, + GATE_BLOCK, + APLL_LOCK, + SRC_CPU, + DIV_CPU0, + DIV_CPU1, +}; + +static int exynos3250_clk_suspend(void) +{ + samsung_clk_save(reg_base, exynos3250_clk_regs, + ARRAY_SIZE(exynos3250_cmu_clk_regs)); + return 0; +} + +static void exynos3250_clk_resume(void) +{ + samsung_clk_restore(reg_base, exynos3250_clk_regs, + ARRAY_SIZE(exynos3250_cmu_clk_regs)); +} + +static struct syscore_ops exynos3250_clk_syscore_ops = { + .suspend = exynos3250_clk_suspend, + .resume = exynos3250_clk_resume, +}; + +static void exynos3250_clk_sleep_init(void) +{ + exynos3250_clk_regs = + samsung_clk_alloc_reg_dump(exynos3250_cmu_clk_regs, + ARRAY_SIZE(exynos3250_cmu_clk_regs)); + if (!exynos3250_clk_regs) { + pr_warn("%s: Failed to allocate sleep save data\n", __func__); + goto err; + } + + register_syscore_ops(&exynos3250_clk_syscore_ops); + return; +err: + kfree(exynos3250_clk_regs); +} +#else +static inline void exynos3250_clk_sleep_init(void) { } +#endif + +/* list of all parent clock list */ +PNAME(mout_vpllsrc_p) = { "fin_pll", }; + +PNAME(mout_apll_p) = { "fin_pll", "fout_apll", }; +PNAME(mout_mpll_p) = { "fin_pll", "fout_mpll", }; +PNAME(mout_vpll_p) = { "fin_pll", "fout_vpll", }; +PNAME(mout_upll_p) = { "fin_pll", "fout_upll", }; + +PNAME(mout_mpll_user_p) = { "fin_pll", "div_mpll_pre", }; +PNAME(mout_epll_user_p) = { "fin_pll", "mout_epll", }; +PNAME(mout_core_p) = { "mout_apll", "mout_mpll_user_c", }; +PNAME(mout_hpm_p) = { "mout_apll", "mout_mpll_user_c", }; + +PNAME(mout_ebi_p) = { "div_aclk_200", "div_aclk_160", }; +PNAME(mout_ebi_1_p) = { "mout_ebi", "mout_vpll", }; + +PNAME(mout_gdl_p) = { "mout_mpll_user_l", }; +PNAME(mout_gdr_p) = { "mout_mpll_user_r", }; + +PNAME(mout_aclk_400_mcuisp_sub_p) + = { "fin_pll", "div_aclk_400_mcuisp", }; +PNAME(mout_aclk_266_0_p) = { "div_mpll_pre", "mout_vpll", }; +PNAME(mout_aclk_266_1_p) = { "mout_epll_user", }; +PNAME(mout_aclk_266_p) = { "mout_aclk_266_0", "mout_aclk_266_1", }; +PNAME(mout_aclk_266_sub_p) = { "fin_pll", "div_aclk_266", }; + +PNAME(group_div_mpll_pre_p) = { "div_mpll_pre", }; +PNAME(group_epll_vpll_p) = { "mout_epll_user", "mout_vpll" }; +PNAME(group_sclk_p) = { "xxti", "xusbxti", + "none", "none", + "none", "none", "div_mpll_pre", + "mout_epll_user", "mout_vpll", }; +PNAME(group_sclk_audio_p) = { "audiocdclk", "none", + "none", "none", + "xxti", "xusbxti", + "div_mpll_pre", "mout_epll_user", + "mout_vpll", }; +PNAME(group_sclk_cam_blk_p) = { "xxti", "xusbxti", + "none", "none", "none", + "none", "div_mpll_pre", + "mout_epll_user", "mout_vpll", + "div_cam_blk_320", }; +PNAME(group_sclk_fimd0_p) = { "xxti", "xusbxti", + "m_bitclkhsdiv4_2l", "none", + "none", "none", "div_mpll_pre", + "mout_epll_user", "mout_vpll", + "none", "none", "none", + "div_lcd_blk_145", }; + +PNAME(mout_mfc_p) = { "mout_mfc_0", "mout_mfc_1" }; +PNAME(mout_g3d_p) = { "mout_g3d_0", "mout_g3d_1" }; + +static struct samsung_fixed_factor_clock fixed_factor_clks[] __initdata = { + FFACTOR(0, "sclk_mpll_1600", "mout_mpll", 1, 1, 0), + FFACTOR(0, "sclk_mpll_mif", "mout_mpll", 1, 2, 0), + FFACTOR(0, "sclk_bpll", "fout_bpll", 1, 2, 0), + FFACTOR(0, "div_cam_blk_320", "sclk_mpll_1600", 1, 5, 0), + FFACTOR(0, "div_lcd_blk_145", "sclk_mpll_1600", 1, 11, 0), + + /* HACK: fin_pll hardcoded to xusbxti until detection is implemented. */ + FFACTOR(CLK_FIN_PLL, "fin_pll", "xusbxti", 1, 1, 0), +}; + +static struct samsung_mux_clock mux_clks[] __initdata = { + /* + * NOTE: Following table is sorted by register address in ascending + * order and then bitfield shift in descending order, as it is done + * in the User's Manual. When adding new entries, please make sure + * that the order is preserved, to avoid merge conflicts and make + * further work with defined data easier. + */ + + /* SRC_LEFTBUS */ + MUX(CLK_MOUT_MPLL_USER_L, "mout_mpll_user_l", mout_mpll_user_p, + SRC_LEFTBUS, 4, 1), + MUX(CLK_MOUT_GDL, "mout_gdl", mout_gdl_p, SRC_LEFTBUS, 0, 1), + + /* SRC_RIGHTBUS */ + MUX(CLK_MOUT_MPLL_USER_R, "mout_mpll_user_r", mout_mpll_user_p, + SRC_RIGHTBUS, 4, 1), + MUX(CLK_MOUT_GDR, "mout_gdr", mout_gdr_p, SRC_RIGHTBUS, 0, 1), + + /* SRC_TOP0 */ + MUX(CLK_MOUT_EBI, "mout_ebi", mout_ebi_p, SRC_TOP0, 28, 1), + MUX(CLK_MOUT_ACLK_200, "mout_aclk_200", group_div_mpll_pre_p,SRC_TOP0, 24, 1), + MUX(CLK_MOUT_ACLK_160, "mout_aclk_160", group_div_mpll_pre_p, SRC_TOP0, 20, 1), + MUX(CLK_MOUT_ACLK_100, "mout_aclk_100", group_div_mpll_pre_p, SRC_TOP0, 16, 1), + MUX(CLK_MOUT_ACLK_266_1, "mout_aclk_266_1", mout_aclk_266_1_p, SRC_TOP0, 14, 1), + MUX(CLK_MOUT_ACLK_266_0, "mout_aclk_266_0", mout_aclk_266_0_p, SRC_TOP0, 13, 1), + MUX(CLK_MOUT_ACLK_266, "mout_aclk_266", mout_aclk_266_p, SRC_TOP0, 12, 1), + MUX(CLK_MOUT_VPLL, "mout_vpll", mout_vpll_p, SRC_TOP0, 8, 1), + MUX(CLK_MOUT_EPLL_USER, "mout_epll_user", mout_epll_user_p, SRC_TOP0, 4, 1), + MUX(CLK_MOUT_EBI_1, "mout_ebi_1", mout_ebi_1_p, SRC_TOP0, 0, 1), + + /* SRC_TOP1 */ + MUX(CLK_MOUT_UPLL, "mout_upll", mout_upll_p, SRC_TOP1, 28, 1), + MUX(CLK_MOUT_ACLK_400_MCUISP_SUB, "mout_aclk_400_mcuisp_sub", mout_aclk_400_mcuisp_sub_p, + SRC_TOP1, 24, 1), + MUX(CLK_MOUT_ACLK_266_SUB, "mout_aclk_266_sub", mout_aclk_266_sub_p, SRC_TOP1, 20, 1), + MUX(CLK_MOUT_MPLL, "mout_mpll", mout_mpll_p, SRC_TOP1, 12, 1), + MUX(CLK_MOUT_ACLK_400_MCUISP, "mout_aclk_400_mcuisp", group_div_mpll_pre_p, SRC_TOP1, 8, 1), + MUX(CLK_MOUT_VPLLSRC, "mout_vpllsrc", mout_vpllsrc_p, SRC_TOP1, 0, 1), + + /* SRC_CAM */ + MUX(CLK_MOUT_CAM1, "mout_cam1", group_sclk_p, SRC_CAM, 20, 4), + MUX(CLK_MOUT_CAM_BLK, "mout_cam_blk", group_sclk_cam_blk_p, SRC_CAM, 0, 4), + + /* SRC_MFC */ + MUX(CLK_MOUT_MFC, "mout_mfc", mout_mfc_p, SRC_MFC, 8, 1), + MUX(CLK_MOUT_MFC_1, "mout_mfc_1", group_epll_vpll_p, SRC_MFC, 4, 1), + MUX(CLK_MOUT_MFC_0, "mout_mfc_0", group_div_mpll_pre_p, SRC_MFC, 0, 1), + + /* SRC_G3D */ + MUX(CLK_MOUT_G3D, "mout_g3d", mout_g3d_p, SRC_G3D, 8, 1), + MUX(CLK_MOUT_G3D_1, "mout_g3d_1", group_epll_vpll_p, SRC_G3D, 4, 1), + MUX(CLK_MOUT_G3D_0, "mout_g3d_0", group_div_mpll_pre_p, SRC_G3D, 0, 1), + + /* SRC_LCD */ + MUX(CLK_MOUT_MIPI0, "mout_mipi0", group_sclk_p, SRC_LCD, 12, 4), + MUX(CLK_MOUT_FIMD0, "mout_fimd0", group_sclk_fimd0_p, SRC_LCD, 0, 4), + + /* SRC_ISP */ + MUX(CLK_MOUT_UART_ISP, "mout_uart_isp", group_sclk_p, SRC_ISP, 12, 4), + MUX(CLK_MOUT_SPI1_ISP, "mout_spi1_isp", group_sclk_p, SRC_ISP, 8, 4), + MUX(CLK_MOUT_SPI0_ISP, "mout_spi0_isp", group_sclk_p, SRC_ISP, 4, 4), + + /* SRC_FSYS */ + MUX(CLK_MOUT_TSADC, "mout_tsadc", group_sclk_p, SRC_FSYS, 28, 4), + MUX(CLK_MOUT_MMC1, "mout_mmc1", group_sclk_p, SRC_FSYS, 4, 3), + MUX(CLK_MOUT_MMC0, "mout_mmc0", group_sclk_p, SRC_FSYS, 0, 3), + + /* SRC_PERIL0 */ + MUX(CLK_MOUT_UART1, "mout_uart1", group_sclk_p, SRC_PERIL0, 4, 4), + MUX(CLK_MOUT_UART0, "mout_uart0", group_sclk_p, SRC_PERIL0, 0, 4), + + /* SRC_PERIL1 */ + MUX(CLK_MOUT_SPI1, "mout_spi1", group_sclk_p, SRC_PERIL1, 20, 4), + MUX(CLK_MOUT_SPI0, "mout_spi0", group_sclk_p, SRC_PERIL1, 16, 4), + MUX(CLK_MOUT_AUDIO, "mout_audio", group_sclk_audio_p, SRC_PERIL1, 4, 4), + + /* SRC_CPU */ + MUX(CLK_MOUT_MPLL_USER_C, "mout_mpll_user_c", mout_mpll_user_p, + SRC_CPU, 24, 1), + MUX(CLK_MOUT_HPM, "mout_hpm", mout_hpm_p, SRC_CPU, 20, 1), + MUX(CLK_MOUT_CORE, "mout_core", mout_core_p, SRC_CPU, 16, 1), + MUX(CLK_MOUT_APLL, "mout_apll", mout_apll_p, SRC_CPU, 0, 1), +}; + +static struct samsung_div_clock div_clks[] __initdata = { + /* + * NOTE: Following table is sorted by register address in ascending + * order and then bitfield shift in descending order, as it is done + * in the User's Manual. When adding new entries, please make sure + * that the order is preserved, to avoid merge conflicts and make + * further work with defined data easier. + */ + + /* DIV_LEFTBUS */ + DIV(CLK_DIV_GPL, "div_gpl", "div_gdl", DIV_LEFTBUS, 4, 3), + DIV(CLK_DIV_GDL, "div_gdl", "mout_gdl", DIV_LEFTBUS, 0, 4), + + /* DIV_RIGHTBUS */ + DIV(CLK_DIV_GPR, "div_gpr", "div_gdr", DIV_RIGHTBUS, 4, 3), + DIV(CLK_DIV_GDR, "div_gdr", "mout_gdr", DIV_RIGHTBUS, 0, 4), + + /* DIV_TOP */ + DIV(CLK_DIV_MPLL_PRE, "div_mpll_pre", "sclk_mpll_mif", DIV_TOP, 28, 2), + DIV(CLK_DIV_ACLK_400_MCUISP, "div_aclk_400_mcuisp", + "mout_aclk_400_mcuisp", DIV_TOP, 24, 3), + DIV(CLK_DIV_EBI, "div_ebi", "mout_ebi_1", DIV_TOP, 16, 3), + DIV(CLK_DIV_ACLK_200, "div_aclk_200", "mout_aclk_200", DIV_TOP, 12, 3), + DIV(CLK_DIV_ACLK_160, "div_aclk_160", "mout_aclk_160", DIV_TOP, 8, 3), + DIV(CLK_DIV_ACLK_100, "div_aclk_100", "mout_aclk_100", DIV_TOP, 4, 4), + DIV(CLK_DIV_ACLK_266, "div_aclk_266", "mout_aclk_266", DIV_TOP, 0, 3), + + /* DIV_CAM */ + DIV(CLK_DIV_CAM1, "div_cam1", "mout_cam1", DIV_CAM, 20, 4), + DIV(CLK_DIV_CAM_BLK, "div_cam_blk", "mout_cam_blk", DIV_CAM, 0, 4), + + /* DIV_MFC */ + DIV(CLK_DIV_MFC, "div_mfc", "mout_mfc", DIV_MFC, 0, 4), + + /* DIV_G3D */ + DIV(CLK_DIV_G3D, "div_g3d", "mout_g3d", DIV_G3D, 0, 4), + + /* DIV_LCD */ + DIV_F(CLK_DIV_MIPI0_PRE, "div_mipi0_pre", "div_mipi0", DIV_LCD, 20, 4, + CLK_SET_RATE_PARENT, 0), + DIV(CLK_DIV_MIPI0, "div_mipi0", "mout_mipi0", DIV_LCD, 16, 4), + DIV(CLK_DIV_FIMD0, "div_fimd0", "mout_fimd0", DIV_LCD, 0, 4), + + /* DIV_ISP */ + DIV(CLK_DIV_UART_ISP, "div_uart_isp", "mout_uart_isp", DIV_ISP, 28, 4), + DIV_F(CLK_DIV_SPI1_ISP_PRE, "div_spi1_isp_pre", "div_spi1_isp", + DIV_ISP, 20, 8, CLK_SET_RATE_PARENT, 0), + DIV(CLK_DIV_SPI1_ISP, "div_spi1_isp", "mout_spi1_isp", DIV_ISP, 16, 4), + DIV_F(CLK_DIV_SPI0_ISP_PRE, "div_spi0_isp_pre", "div_spi0_isp", + DIV_ISP, 8, 8, CLK_SET_RATE_PARENT, 0), + DIV(CLK_DIV_SPI0_ISP, "div_spi0_isp", "mout_spi0_isp", DIV_ISP, 0, 4), + + /* DIV_FSYS0 */ + DIV_F(CLK_DIV_TSADC_PRE, "div_tsadc_pre", "div_tsadc", DIV_FSYS0, 8, 8, + CLK_SET_RATE_PARENT, 0), + DIV(CLK_DIV_TSADC, "div_tsadc", "mout_tsadc", DIV_FSYS0, 0, 4), + + /* DIV_FSYS1 */ + DIV_F(CLK_DIV_MMC1_PRE, "div_mmc1_pre", "div_mmc1", DIV_FSYS1, 24, 8, + CLK_SET_RATE_PARENT, 0), + DIV(CLK_DIV_MMC1, "div_mmc1", "mout_mmc1", DIV_FSYS1, 16, 4), + DIV_F(CLK_DIV_MMC0_PRE, "div_mmc0_pre", "div_mmc0", DIV_FSYS1, 8, 8, + CLK_SET_RATE_PARENT, 0), + DIV(CLK_DIV_MMC0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4), + + /* DIV_PERIL0 */ + DIV(CLK_DIV_UART1, "div_uart1", "mout_uart1", DIV_PERIL0, 4, 4), + DIV(CLK_DIV_UART0, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4), + + /* DIV_PERIL1 */ + DIV_F(CLK_DIV_SPI1_PRE, "div_spi1_pre", "div_spi1", DIV_PERIL1, 24, 8, + CLK_SET_RATE_PARENT, 0), + DIV(CLK_DIV_SPI1, "div_spi1", "mout_spi1", DIV_PERIL1, 16, 4), + DIV_F(CLK_DIV_SPI0_PRE, "div_spi0_pre", "div_spi0", DIV_PERIL1, 8, 8, + CLK_SET_RATE_PARENT, 0), + DIV(CLK_DIV_SPI0, "div_spi0", "mout_spi0", DIV_PERIL1, 0, 4), + + /* DIV_PERIL4 */ + DIV(CLK_DIV_PCM, "div_pcm", "div_audio", DIV_PERIL4, 20, 8), + DIV(CLK_DIV_AUDIO, "div_audio", "mout_audio", DIV_PERIL4, 16, 4), + + /* DIV_PERIL5 */ + DIV(CLK_DIV_I2S, "div_i2s", "div_audio", DIV_PERIL5, 8, 6), + + /* DIV_CPU0 */ + DIV(CLK_DIV_CORE2, "div_core2", "div_core", DIV_CPU0, 28, 3), + DIV(CLK_DIV_APLL, "div_apll", "mout_apll", DIV_CPU0, 24, 3), + DIV(CLK_DIV_PCLK_DBG, "div_pclk_dbg", "div_core2", DIV_CPU0, 20, 3), + DIV(CLK_DIV_ATB, "div_atb", "div_core2", DIV_CPU0, 16, 3), + DIV(CLK_DIV_COREM, "div_corem", "div_core2", DIV_CPU0, 4, 3), + DIV(CLK_DIV_CORE, "div_core", "mout_core", DIV_CPU0, 0, 3), + + /* DIV_CPU1 */ + DIV(CLK_DIV_HPM, "div_hpm", "div_copy", DIV_CPU1, 4, 3), + DIV(CLK_DIV_COPY, "div_copy", "mout_hpm", DIV_CPU1, 0, 3), +}; + +static struct samsung_gate_clock gate_clks[] __initdata = { + /* + * NOTE: Following table is sorted by register address in ascending + * order and then bitfield shift in descending order, as it is done + * in the User's Manual. When adding new entries, please make sure + * that the order is preserved, to avoid merge conflicts and make + * further work with defined data easier. + */ + + /* GATE_IP_LEFTBUS */ + GATE(CLK_ASYNC_G3D, "async_g3d", "div_aclk_100", GATE_IP_LEFTBUS, 6, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_ASYNC_MFCL, "async_mfcl", "div_aclk_100", GATE_IP_LEFTBUS, 4, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_PPMULEFT, "ppmuleft", "div_aclk_100", GATE_IP_LEFTBUS, 1, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_GPIO_LEFT, "gpio_left", "div_aclk_100", GATE_IP_LEFTBUS, 0, + CLK_IGNORE_UNUSED, 0), + + /* GATE_IP_RIGHTBUS */ + GATE(CLK_ASYNC_ISPMX, "async_ispmx", "div_aclk_100", + GATE_IP_RIGHTBUS, 9, CLK_IGNORE_UNUSED, 0), + GATE(CLK_ASYNC_FSYSD, "async_fsysd", "div_aclk_100", + GATE_IP_RIGHTBUS, 5, CLK_IGNORE_UNUSED, 0), + GATE(CLK_ASYNC_LCD0X, "async_lcd0x", "div_aclk_100", + GATE_IP_RIGHTBUS, 3, CLK_IGNORE_UNUSED, 0), + GATE(CLK_ASYNC_CAMX, "async_camx", "div_aclk_100", GATE_IP_RIGHTBUS, 2, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_PPMURIGHT, "ppmuright", "div_aclk_100", GATE_IP_RIGHTBUS, 1, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_GPIO_RIGHT, "gpio_right", "div_aclk_100", GATE_IP_RIGHTBUS, 0, + CLK_IGNORE_UNUSED, 0), + + /* GATE_IP_PERIR */ + GATE(CLK_MONOCNT, "monocnt", "div_aclk_100", GATE_IP_PERIR, 22, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_TZPC6, "tzpc6", "div_aclk_100", GATE_IP_PERIR, 21, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_PROVISIONKEY1, "provisionkey1", "div_aclk_100", + GATE_IP_PERIR, 20, CLK_IGNORE_UNUSED, 0), + GATE(CLK_PROVISIONKEY0, "provisionkey0", "div_aclk_100", + GATE_IP_PERIR, 19, CLK_IGNORE_UNUSED, 0), + GATE(CLK_CMU_ISPPART, "cmu_isppart", "div_aclk_100", GATE_IP_PERIR, 18, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_TMU_APBIF, "tmu_apbif", "div_aclk_100", + GATE_IP_PERIR, 17, 0, 0), + GATE(CLK_KEYIF, "keyif", "div_aclk_100", GATE_IP_PERIR, 16, 0, 0), + GATE(CLK_RTC, "rtc", "div_aclk_100", GATE_IP_PERIR, 15, 0, 0), + GATE(CLK_WDT, "wdt", "div_aclk_100", GATE_IP_PERIR, 14, 0, 0), + GATE(CLK_MCT, "mct", "div_aclk_100", GATE_IP_PERIR, 13, 0, 0), + GATE(CLK_SECKEY, "seckey", "div_aclk_100", GATE_IP_PERIR, 12, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_TZPC5, "tzpc5", "div_aclk_100", GATE_IP_PERIR, 10, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_TZPC4, "tzpc4", "div_aclk_100", GATE_IP_PERIR, 9, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_TZPC3, "tzpc3", "div_aclk_100", GATE_IP_PERIR, 8, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_TZPC2, "tzpc2", "div_aclk_100", GATE_IP_PERIR, 7, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_TZPC1, "tzpc1", "div_aclk_100", GATE_IP_PERIR, 6, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_TZPC0, "tzpc0", "div_aclk_100", GATE_IP_PERIR, 5, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_CMU_COREPART, "cmu_corepart", "div_aclk_100", GATE_IP_PERIR, 4, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_CMU_TOPPART, "cmu_toppart", "div_aclk_100", GATE_IP_PERIR, 3, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_PMU_APBIF, "pmu_apbif", "div_aclk_100", GATE_IP_PERIR, 2, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_SYSREG, "sysreg", "div_aclk_100", GATE_IP_PERIR, 1, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_CHIP_ID, "chip_id", "div_aclk_100", GATE_IP_PERIR, 0, + CLK_IGNORE_UNUSED, 0), + + /* GATE_SCLK_CAM */ + GATE(CLK_SCLK_JPEG, "sclk_jpeg", "div_cam_blk", + GATE_SCLK_CAM, 8, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_M2MSCALER, "sclk_m2mscaler", "div_cam_blk", + GATE_SCLK_CAM, 2, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_GSCALER1, "sclk_gscaler1", "div_cam_blk", + GATE_SCLK_CAM, 1, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_GSCALER0, "sclk_gscaler0", "div_cam_blk", + GATE_SCLK_CAM, 0, CLK_SET_RATE_PARENT, 0), + + /* GATE_SCLK_MFC */ + GATE(CLK_SCLK_MFC, "sclk_mfc", "div_mfc", + GATE_SCLK_MFC, 0, CLK_SET_RATE_PARENT, 0), + + /* GATE_SCLK_G3D */ + GATE(CLK_SCLK_G3D, "sclk_g3d", "div_g3d", + GATE_SCLK_G3D, 0, CLK_SET_RATE_PARENT, 0), + + /* GATE_SCLK_LCD */ + GATE(CLK_SCLK_MIPIDPHY2L, "sclk_mipidphy2l", "div_mipi0", + GATE_SCLK_LCD, 4, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_MIPI0, "sclk_mipi0", "div_mipi0_pre", + GATE_SCLK_LCD, 3, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_FIMD0, "sclk_fimd0", "div_fimd0", + GATE_SCLK_LCD, 0, CLK_SET_RATE_PARENT, 0), + + /* GATE_SCLK_ISP_TOP */ + GATE(CLK_SCLK_CAM1, "sclk_cam1", "div_cam1", + GATE_SCLK_ISP_TOP, 4, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_UART_ISP, "sclk_uart_isp", "div_uart_isp", + GATE_SCLK_ISP_TOP, 3, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_SPI1_ISP, "sclk_spi1_isp", "div_spi1_isp", + GATE_SCLK_ISP_TOP, 2, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_SPI0_ISP, "sclk_spi0_isp", "div_spi0_isp", + GATE_SCLK_ISP_TOP, 1, CLK_SET_RATE_PARENT, 0), + + /* GATE_SCLK_FSYS */ + GATE(CLK_SCLK_UPLL, "sclk_upll", "mout_upll", GATE_SCLK_FSYS, 10, 0, 0), + GATE(CLK_SCLK_TSADC, "sclk_tsadc", "div_tsadc_pre", + GATE_SCLK_FSYS, 9, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_EBI, "sclk_ebi", "div_ebi", + GATE_SCLK_FSYS, 6, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_MMC1, "sclk_mmc1", "div_mmc1_pre", + GATE_SCLK_FSYS, 1, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_MMC0, "sclk_mmc0", "div_mmc0_pre", + GATE_SCLK_FSYS, 0, CLK_SET_RATE_PARENT, 0), + + /* GATE_SCLK_PERIL */ + GATE(CLK_SCLK_I2S, "sclk_i2s", "div_i2s", + GATE_SCLK_PERIL, 18, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_PCM, "sclk_pcm", "div_pcm", + GATE_SCLK_PERIL, 16, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_SPI1, "sclk_spi1", "div_spi1_pre", + GATE_SCLK_PERIL, 7, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_SPI0, "sclk_spi0", "div_spi0_pre", + GATE_SCLK_PERIL, 6, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_UART1, "sclk_uart1", "div_uart1", + GATE_SCLK_PERIL, 1, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0", + GATE_SCLK_PERIL, 0, CLK_SET_RATE_PARENT, 0), + + /* GATE_IP_CAM */ + GATE(CLK_QEJPEG, "qejpeg", "div_cam_blk_320", GATE_IP_CAM, 19, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_PIXELASYNCM1, "pixelasyncm1", "div_cam_blk_320", + GATE_IP_CAM, 18, CLK_IGNORE_UNUSED, 0), + GATE(CLK_PIXELASYNCM0, "pixelasyncm0", "div_cam_blk_320", + GATE_IP_CAM, 17, CLK_IGNORE_UNUSED, 0), + GATE(CLK_PPMUCAMIF, "ppmucamif", "div_cam_blk_320", + GATE_IP_CAM, 16, CLK_IGNORE_UNUSED, 0), + GATE(CLK_QEM2MSCALER, "qem2mscaler", "div_cam_blk_320", + GATE_IP_CAM, 14, CLK_IGNORE_UNUSED, 0), + GATE(CLK_QEGSCALER1, "qegscaler1", "div_cam_blk_320", + GATE_IP_CAM, 13, CLK_IGNORE_UNUSED, 0), + GATE(CLK_QEGSCALER0, "qegscaler0", "div_cam_blk_320", + GATE_IP_CAM, 12, CLK_IGNORE_UNUSED, 0), + GATE(CLK_SMMUJPEG, "smmujpeg", "div_cam_blk_320", + GATE_IP_CAM, 11, 0, 0), + GATE(CLK_SMMUM2M2SCALER, "smmum2m2scaler", "div_cam_blk_320", + GATE_IP_CAM, 9, 0, 0), + GATE(CLK_SMMUGSCALER1, "smmugscaler1", "div_cam_blk_320", + GATE_IP_CAM, 8, 0, 0), + GATE(CLK_SMMUGSCALER0, "smmugscaler0", "div_cam_blk_320", + GATE_IP_CAM, 7, 0, 0), + GATE(CLK_JPEG, "jpeg", "div_cam_blk_320", GATE_IP_CAM, 6, 0, 0), + GATE(CLK_M2MSCALER, "m2mscaler", "div_cam_blk_320", + GATE_IP_CAM, 2, 0, 0), + GATE(CLK_GSCALER1, "gscaler1", "div_cam_blk_320", GATE_IP_CAM, 1, 0, 0), + GATE(CLK_GSCALER0, "gscaler0", "div_cam_blk_320", GATE_IP_CAM, 0, 0, 0), + + /* GATE_IP_MFC */ + GATE(CLK_QEMFC, "qemfc", "div_aclk_200", GATE_IP_MFC, 5, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_PPMUMFC_L, "ppmumfc_l", "div_aclk_200", GATE_IP_MFC, 3, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_SMMUMFC_L, "smmumfc_l", "div_aclk_200", GATE_IP_MFC, 1, 0, 0), + GATE(CLK_MFC, "mfc", "div_aclk_200", GATE_IP_MFC, 0, 0, 0), + + /* GATE_IP_G3D */ + GATE(CLK_SMMUG3D, "smmug3d", "div_aclk_200", GATE_IP_G3D, 3, 0, 0), + GATE(CLK_QEG3D, "qeg3d", "div_aclk_200", GATE_IP_G3D, 2, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_PPMUG3D, "ppmug3d", "div_aclk_200", GATE_IP_G3D, 1, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_G3D, "g3d", "div_aclk_200", GATE_IP_G3D, 0, 0, 0), + + /* GATE_IP_LCD */ + GATE(CLK_QE_CH1_LCD, "qe_ch1_lcd", "div_aclk_160", GATE_IP_LCD, 7, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_QE_CH0_LCD, "qe_ch0_lcd", "div_aclk_160", GATE_IP_LCD, 6, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_PPMULCD0, "ppmulcd0", "div_aclk_160", GATE_IP_LCD, 5, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_SMMUFIMD0, "smmufimd0", "div_aclk_160", GATE_IP_LCD, 4, 0, 0), + GATE(CLK_DSIM0, "dsim0", "div_aclk_160", GATE_IP_LCD, 3, 0, 0), + GATE(CLK_SMIES, "smies", "div_aclk_160", GATE_IP_LCD, 2, 0, 0), + GATE(CLK_FIMD0, "fimd0", "div_aclk_160", GATE_IP_LCD, 0, 0, 0), + + /* GATE_IP_ISP */ + GATE(CLK_CAM1, "cam1", "mout_aclk_266_sub", GATE_IP_ISP, 5, 0, 0), + GATE(CLK_UART_ISP_TOP, "uart_isp_top", "mout_aclk_266_sub", + GATE_IP_ISP, 3, 0, 0), + GATE(CLK_SPI1_ISP_TOP, "spi1_isp_top", "mout_aclk_266_sub", + GATE_IP_ISP, 2, 0, 0), + GATE(CLK_SPI0_ISP_TOP, "spi0_isp_top", "mout_aclk_266_sub", + GATE_IP_ISP, 1, 0, 0), + + /* GATE_IP_FSYS */ + GATE(CLK_TSADC, "tsadc", "div_aclk_200", GATE_IP_FSYS, 20, 0, 0), + GATE(CLK_PPMUFILE, "ppmufile", "div_aclk_200", GATE_IP_FSYS, 17, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_USBOTG, "usbotg", "div_aclk_200", GATE_IP_FSYS, 13, 0, 0), + GATE(CLK_USBHOST, "usbhost", "div_aclk_200", GATE_IP_FSYS, 12, 0, 0), + GATE(CLK_SROMC, "sromc", "div_aclk_200", GATE_IP_FSYS, 11, 0, 0), + GATE(CLK_SDMMC1, "sdmmc1", "div_aclk_200", GATE_IP_FSYS, 6, 0, 0), + GATE(CLK_SDMMC0, "sdmmc0", "div_aclk_200", GATE_IP_FSYS, 5, 0, 0), + GATE(CLK_PDMA1, "pdma1", "div_aclk_200", GATE_IP_FSYS, 1, 0, 0), + GATE(CLK_PDMA0, "pdma0", "div_aclk_200", GATE_IP_FSYS, 0, 0, 0), + + /* GATE_IP_PERIL */ + GATE(CLK_PWM, "pwm", "div_aclk_100", GATE_IP_PERIL, 24, 0, 0), + GATE(CLK_PCM, "pcm", "div_aclk_100", GATE_IP_PERIL, 23, 0, 0), + GATE(CLK_I2S, "i2s", "div_aclk_100", GATE_IP_PERIL, 21, 0, 0), + GATE(CLK_SPI1, "spi1", "div_aclk_100", GATE_IP_PERIL, 17, 0, 0), + GATE(CLK_SPI0, "spi0", "div_aclk_100", GATE_IP_PERIL, 16, 0, 0), + GATE(CLK_I2C7, "i2c7", "div_aclk_100", GATE_IP_PERIL, 13, 0, 0), + GATE(CLK_I2C6, "i2c6", "div_aclk_100", GATE_IP_PERIL, 12, 0, 0), + GATE(CLK_I2C5, "i2c5", "div_aclk_100", GATE_IP_PERIL, 11, 0, 0), + GATE(CLK_I2C4, "i2c4", "div_aclk_100", GATE_IP_PERIL, 10, 0, 0), + GATE(CLK_I2C3, "i2c3", "div_aclk_100", GATE_IP_PERIL, 9, 0, 0), + GATE(CLK_I2C2, "i2c2", "div_aclk_100", GATE_IP_PERIL, 8, 0, 0), + GATE(CLK_I2C1, "i2c1", "div_aclk_100", GATE_IP_PERIL, 7, 0, 0), + GATE(CLK_I2C0, "i2c0", "div_aclk_100", GATE_IP_PERIL, 6, 0, 0), + GATE(CLK_UART1, "uart1", "div_aclk_100", GATE_IP_PERIL, 1, 0, 0), + GATE(CLK_UART0, "uart0", "div_aclk_100", GATE_IP_PERIL, 0, 0, 0), +}; + +/* APLL & MPLL & BPLL & UPLL */ +static struct samsung_pll_rate_table exynos3250_pll_rates[] = { + PLL_35XX_RATE(1200000000, 400, 4, 1), + PLL_35XX_RATE(1100000000, 275, 3, 1), + PLL_35XX_RATE(1066000000, 533, 6, 1), + PLL_35XX_RATE(1000000000, 250, 3, 1), + PLL_35XX_RATE( 960000000, 320, 4, 1), + PLL_35XX_RATE( 900000000, 300, 4, 1), + PLL_35XX_RATE( 850000000, 425, 6, 1), + PLL_35XX_RATE( 800000000, 200, 3, 1), + PLL_35XX_RATE( 700000000, 175, 3, 1), + PLL_35XX_RATE( 667000000, 667, 12, 1), + PLL_35XX_RATE( 600000000, 400, 4, 2), + PLL_35XX_RATE( 533000000, 533, 6, 2), + PLL_35XX_RATE( 520000000, 260, 3, 2), + PLL_35XX_RATE( 500000000, 250, 3, 2), + PLL_35XX_RATE( 400000000, 200, 3, 2), + PLL_35XX_RATE( 200000000, 200, 3, 3), + PLL_35XX_RATE( 100000000, 200, 3, 4), + { /* sentinel */ } +}; + +/* VPLL */ +static struct samsung_pll_rate_table exynos3250_vpll_rates[] = { + PLL_36XX_RATE(600000000, 100, 2, 1, 0), + PLL_36XX_RATE(533000000, 266, 3, 2, 32768), + PLL_36XX_RATE(519230987, 173, 2, 2, 5046), + PLL_36XX_RATE(500000000, 250, 3, 2, 0), + PLL_36XX_RATE(445500000, 148, 2, 2, 32768), + PLL_36XX_RATE(445055007, 148, 2, 2, 23047), + PLL_36XX_RATE(400000000, 200, 3, 2, 0), + PLL_36XX_RATE(371250000, 123, 2, 2, 49152), + PLL_36XX_RATE(370878997, 185, 3, 2, 28803), + PLL_36XX_RATE(340000000, 170, 3, 2, 0), + PLL_36XX_RATE(335000015, 111, 2, 2, 43691), + PLL_36XX_RATE(333000000, 111, 2, 2, 0), + PLL_36XX_RATE(330000000, 110, 2, 2, 0), + PLL_36XX_RATE(320000015, 106, 2, 2, 43691), + PLL_36XX_RATE(300000000, 100, 2, 2, 0), + PLL_36XX_RATE(275000000, 275, 3, 3, 0), + PLL_36XX_RATE(222750000, 148, 2, 3, 32768), + PLL_36XX_RATE(222528007, 148, 2, 3, 23069), + PLL_36XX_RATE(160000000, 160, 3, 3, 0), + PLL_36XX_RATE(148500000, 99, 2, 3, 0), + PLL_36XX_RATE(148352005, 98, 2, 3, 59070), + PLL_36XX_RATE(108000000, 144, 2, 4, 0), + PLL_36XX_RATE( 74250000, 99, 2, 4, 0), + PLL_36XX_RATE( 74176002, 98, 3, 4, 59070), + PLL_36XX_RATE( 54054000, 216, 3, 5, 14156), + PLL_36XX_RATE( 54000000, 144, 2, 5, 0), + { /* sentinel */ } +}; + +static struct samsung_pll_clock exynos3250_plls[nr_plls] __initdata = { + [apll] = PLL(pll_35xx, CLK_FOUT_APLL, "fout_apll", "fin_pll", + APLL_LOCK, APLL_CON0, NULL), + [mpll] = PLL(pll_35xx, CLK_FOUT_MPLL, "fout_mpll", "fin_pll", + MPLL_LOCK, MPLL_CON0, NULL), + [vpll] = PLL(pll_36xx, CLK_FOUT_VPLL, "fout_vpll", "fin_pll", + VPLL_LOCK, VPLL_CON0, NULL), + [upll] = PLL(pll_35xx, CLK_FOUT_UPLL, "fout_upll", "fin_pll", + UPLL_LOCK, UPLL_CON0, NULL), +}; + +static void __init exynos3250_cmu_init(struct device_node *np) +{ + struct samsung_clk_provider *ctx; + + reg_base = of_iomap(np, 0); + if (!reg_base) + panic("%s: failed to map registers\n", __func__); + + ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS); + if (!ctx) + panic("%s: unable to allocate context.\n", __func__); + + samsung_clk_register_fixed_factor(ctx, fixed_factor_clks, + ARRAY_SIZE(fixed_factor_clks)); + + exynos3250_plls[apll].rate_table = exynos3250_pll_rates; + exynos3250_plls[mpll].rate_table = exynos3250_pll_rates; + exynos3250_plls[vpll].rate_table = exynos3250_vpll_rates; + exynos3250_plls[upll].rate_table = exynos3250_pll_rates; + + samsung_clk_register_pll(ctx, exynos3250_plls, + ARRAY_SIZE(exynos3250_plls), reg_base); + + samsung_clk_register_mux(ctx, mux_clks, ARRAY_SIZE(mux_clks)); + samsung_clk_register_div(ctx, div_clks, ARRAY_SIZE(div_clks)); + samsung_clk_register_gate(ctx, gate_clks, ARRAY_SIZE(gate_clks)); + + exynos3250_clk_sleep_init(); +} +CLK_OF_DECLARE(exynos3250_cmu, "samsung,exynos3250-cmu", exynos3250_cmu_init); diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c index b4f967210175..c4df294bb7fb 100644 --- a/drivers/clk/samsung/clk-exynos4.c +++ b/drivers/clk/samsung/clk-exynos4.c @@ -428,7 +428,7 @@ static struct samsung_fixed_rate_clock exynos4_fixed_rate_ext_clks[] __initdata /* fixed rate clocks generated inside the soc */ static struct samsung_fixed_rate_clock exynos4_fixed_rate_clks[] __initdata = { FRATE(0, "sclk_hdmi24m", NULL, CLK_IS_ROOT, 24000000), - FRATE(0, "sclk_hdmiphy", NULL, CLK_IS_ROOT, 27000000), + FRATE(CLK_SCLK_HDMIPHY, "sclk_hdmiphy", NULL, CLK_IS_ROOT, 27000000), FRATE(0, "sclk_usbphy0", NULL, CLK_IS_ROOT, 48000000), }; @@ -903,7 +903,7 @@ static struct samsung_gate_clock exynos4x12_gate_clks[] __initdata = { GATE(CLK_AUDSS, "audss", "sclk_epll", E4X12_GATE_IP_MAUDIO, 0, 0, 0), GATE(CLK_MDNIE0, "mdnie0", "aclk160", GATE_IP_LCD0, 2, 0, 0), GATE(CLK_ROTATOR, "rotator", "aclk200", E4X12_GATE_IP_IMAGE, 1, 0, 0), - GATE(CLK_MDMA2, "mdma2", "aclk200", E4X12_GATE_IP_IMAGE, 2, 0, 0), + GATE(CLK_MDMA, "mdma", "aclk200", E4X12_GATE_IP_IMAGE, 2, 0, 0), GATE(CLK_SMMU_MDMA, "smmu_mdma", "aclk200", E4X12_GATE_IP_IMAGE, 5, 0, 0), GATE(CLK_MIPI_HSI, "mipi_hsi", "aclk133", GATE_IP_FSYS, 10, 0, 0), @@ -1043,7 +1043,7 @@ static unsigned long exynos4_get_xom(void) return xom; } -static void __init exynos4_clk_register_finpll(void) +static void __init exynos4_clk_register_finpll(struct samsung_clk_provider *ctx) { struct samsung_fixed_rate_clock fclk; struct clk *clk; @@ -1066,7 +1066,7 @@ static void __init exynos4_clk_register_finpll(void) fclk.parent_name = NULL; fclk.flags = CLK_IS_ROOT; fclk.fixed_rate = finpll_f; - samsung_clk_register_fixed_rate(&fclk, 1); + samsung_clk_register_fixed_rate(ctx, &fclk, 1); } @@ -1176,22 +1176,25 @@ static struct samsung_pll_clock exynos4x12_plls[nr_plls] __initdata = { static void __init exynos4_clk_init(struct device_node *np, enum exynos4_soc soc) { + struct samsung_clk_provider *ctx; exynos4_soc = soc; reg_base = of_iomap(np, 0); if (!reg_base) panic("%s: failed to map registers\n", __func__); - samsung_clk_init(np, reg_base, CLK_NR_CLKS); + ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS); + if (!ctx) + panic("%s: unable to allocate context.\n", __func__); - samsung_clk_of_register_fixed_ext(exynos4_fixed_rate_ext_clks, + samsung_clk_of_register_fixed_ext(ctx, exynos4_fixed_rate_ext_clks, ARRAY_SIZE(exynos4_fixed_rate_ext_clks), ext_clk_match); - exynos4_clk_register_finpll(); + exynos4_clk_register_finpll(ctx); if (exynos4_soc == EXYNOS4210) { - samsung_clk_register_mux(exynos4210_mux_early, + samsung_clk_register_mux(ctx, exynos4210_mux_early, ARRAY_SIZE(exynos4210_mux_early)); if (_get_rate("fin_pll") == 24000000) { @@ -1205,7 +1208,7 @@ static void __init exynos4_clk_init(struct device_node *np, exynos4210_plls[vpll].rate_table = exynos4210_vpll_rates; - samsung_clk_register_pll(exynos4210_plls, + samsung_clk_register_pll(ctx, exynos4210_plls, ARRAY_SIZE(exynos4210_plls), reg_base); } else { if (_get_rate("fin_pll") == 24000000) { @@ -1217,42 +1220,42 @@ static void __init exynos4_clk_init(struct device_node *np, exynos4x12_vpll_rates; } - samsung_clk_register_pll(exynos4x12_plls, + samsung_clk_register_pll(ctx, exynos4x12_plls, ARRAY_SIZE(exynos4x12_plls), reg_base); } - samsung_clk_register_fixed_rate(exynos4_fixed_rate_clks, + samsung_clk_register_fixed_rate(ctx, exynos4_fixed_rate_clks, ARRAY_SIZE(exynos4_fixed_rate_clks)); - samsung_clk_register_mux(exynos4_mux_clks, + samsung_clk_register_mux(ctx, exynos4_mux_clks, ARRAY_SIZE(exynos4_mux_clks)); - samsung_clk_register_div(exynos4_div_clks, + samsung_clk_register_div(ctx, exynos4_div_clks, ARRAY_SIZE(exynos4_div_clks)); - samsung_clk_register_gate(exynos4_gate_clks, + samsung_clk_register_gate(ctx, exynos4_gate_clks, ARRAY_SIZE(exynos4_gate_clks)); if (exynos4_soc == EXYNOS4210) { - samsung_clk_register_fixed_rate(exynos4210_fixed_rate_clks, + samsung_clk_register_fixed_rate(ctx, exynos4210_fixed_rate_clks, ARRAY_SIZE(exynos4210_fixed_rate_clks)); - samsung_clk_register_mux(exynos4210_mux_clks, + samsung_clk_register_mux(ctx, exynos4210_mux_clks, ARRAY_SIZE(exynos4210_mux_clks)); - samsung_clk_register_div(exynos4210_div_clks, + samsung_clk_register_div(ctx, exynos4210_div_clks, ARRAY_SIZE(exynos4210_div_clks)); - samsung_clk_register_gate(exynos4210_gate_clks, + samsung_clk_register_gate(ctx, exynos4210_gate_clks, ARRAY_SIZE(exynos4210_gate_clks)); - samsung_clk_register_alias(exynos4210_aliases, + samsung_clk_register_alias(ctx, exynos4210_aliases, ARRAY_SIZE(exynos4210_aliases)); } else { - samsung_clk_register_mux(exynos4x12_mux_clks, + samsung_clk_register_mux(ctx, exynos4x12_mux_clks, ARRAY_SIZE(exynos4x12_mux_clks)); - samsung_clk_register_div(exynos4x12_div_clks, + samsung_clk_register_div(ctx, exynos4x12_div_clks, ARRAY_SIZE(exynos4x12_div_clks)); - samsung_clk_register_gate(exynos4x12_gate_clks, + samsung_clk_register_gate(ctx, exynos4x12_gate_clks, ARRAY_SIZE(exynos4x12_gate_clks)); - samsung_clk_register_alias(exynos4x12_aliases, + samsung_clk_register_alias(ctx, exynos4x12_aliases, ARRAY_SIZE(exynos4x12_aliases)); } - samsung_clk_register_alias(exynos4_aliases, + samsung_clk_register_alias(ctx, exynos4_aliases, ARRAY_SIZE(exynos4_aliases)); exynos4_clk_sleep_init(); diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c index e7ee4420da81..1416c9703266 100644 --- a/drivers/clk/samsung/clk-exynos5250.c +++ b/drivers/clk/samsung/clk-exynos5250.c @@ -24,6 +24,8 @@ #define APLL_CON0 0x100 #define SRC_CPU 0x200 #define DIV_CPU0 0x500 +#define PWR_CTRL1 0x1020 +#define PWR_CTRL2 0x1024 #define MPLL_LOCK 0x4000 #define MPLL_CON0 0x4100 #define SRC_CORE1 0x4204 @@ -37,6 +39,7 @@ #define VPLL_CON0 0x10140 #define GPLL_CON0 0x10150 #define SRC_TOP0 0x10210 +#define SRC_TOP1 0x10214 #define SRC_TOP2 0x10218 #define SRC_TOP3 0x1021c #define SRC_GSCL 0x10220 @@ -71,6 +74,7 @@ #define GATE_IP_GSCL 0x10920 #define GATE_IP_DISP1 0x10928 #define GATE_IP_MFC 0x1092c +#define GATE_IP_G3D 0x10930 #define GATE_IP_GEN 0x10934 #define GATE_IP_FSYS 0x10944 #define GATE_IP_PERIC 0x10950 @@ -80,6 +84,23 @@ #define SRC_CDREX 0x20200 #define PLL_DIV2_SEL 0x20a24 +/*Below definitions are used for PWR_CTRL settings*/ +#define PWR_CTRL1_CORE2_DOWN_RATIO (7 << 28) +#define PWR_CTRL1_CORE1_DOWN_RATIO (7 << 16) +#define PWR_CTRL1_DIV2_DOWN_EN (1 << 9) +#define PWR_CTRL1_DIV1_DOWN_EN (1 << 8) +#define PWR_CTRL1_USE_CORE1_WFE (1 << 5) +#define PWR_CTRL1_USE_CORE0_WFE (1 << 4) +#define PWR_CTRL1_USE_CORE1_WFI (1 << 1) +#define PWR_CTRL1_USE_CORE0_WFI (1 << 0) + +#define PWR_CTRL2_DIV2_UP_EN (1 << 25) +#define PWR_CTRL2_DIV1_UP_EN (1 << 24) +#define PWR_CTRL2_DUR_STANDBY2_VAL (1 << 16) +#define PWR_CTRL2_DUR_STANDBY1_VAL (1 << 8) +#define PWR_CTRL2_CORE2_UP_RATIO (1 << 4) +#define PWR_CTRL2_CORE1_UP_RATIO (1 << 0) + /* list of PLLs to be registered */ enum exynos5250_plls { apll, mpll, cpll, epll, vpll, gpll, bpll, @@ -98,8 +119,11 @@ static struct samsung_clk_reg_dump *exynos5250_save; static unsigned long exynos5250_clk_regs[] __initdata = { SRC_CPU, DIV_CPU0, + PWR_CTRL1, + PWR_CTRL2, SRC_CORE1, SRC_TOP0, + SRC_TOP1, SRC_TOP2, SRC_TOP3, SRC_GSCL, @@ -133,6 +157,7 @@ static unsigned long exynos5250_clk_regs[] __initdata = { DIV_PERIC5, GATE_IP_GSCL, GATE_IP_MFC, + GATE_IP_G3D, GATE_IP_GEN, GATE_IP_FSYS, GATE_IP_PERIC, @@ -189,10 +214,12 @@ PNAME(mout_vpllsrc_p) = { "fin_pll", "sclk_hdmi27m" }; PNAME(mout_vpll_p) = { "mout_vpllsrc", "fout_vpll" }; PNAME(mout_cpll_p) = { "fin_pll", "fout_cpll" }; PNAME(mout_epll_p) = { "fin_pll", "fout_epll" }; +PNAME(mout_gpll_p) = { "fin_pll", "fout_gpll" }; PNAME(mout_mpll_user_p) = { "fin_pll", "mout_mpll" }; PNAME(mout_bpll_user_p) = { "fin_pll", "mout_bpll" }; PNAME(mout_aclk166_p) = { "mout_cpll", "mout_mpll_user" }; PNAME(mout_aclk200_p) = { "mout_mpll_user", "mout_bpll_user" }; +PNAME(mout_aclk400_p) = { "mout_aclk400_g3d_mid", "mout_gpll" }; PNAME(mout_aclk200_sub_p) = { "fin_pll", "div_aclk200" }; PNAME(mout_aclk266_sub_p) = { "fin_pll", "div_aclk266" }; PNAME(mout_aclk333_sub_p) = { "fin_pll", "div_aclk333" }; @@ -273,12 +300,16 @@ static struct samsung_mux_clock exynos5250_mux_clks[] __initdata = { MUX(0, "mout_aclk166", mout_aclk166_p, SRC_TOP0, 8, 1), MUX(0, "mout_aclk200", mout_aclk200_p, SRC_TOP0, 12, 1), MUX(0, "mout_aclk333", mout_aclk166_p, SRC_TOP0, 16, 1), + MUX(0, "mout_aclk400_g3d_mid", mout_aclk200_p, SRC_TOP0, 20, 1), + + MUX(0, "mout_aclk400_g3d", mout_aclk400_p, SRC_TOP1, 28, 1), MUX(0, "mout_cpll", mout_cpll_p, SRC_TOP2, 8, 1), MUX(0, "mout_epll", mout_epll_p, SRC_TOP2, 12, 1), MUX(0, "mout_vpll", mout_vpll_p, SRC_TOP2, 16, 1), MUX(0, "mout_mpll_user", mout_mpll_user_p, SRC_TOP2, 20, 1), MUX(0, "mout_bpll_user", mout_bpll_user_p, SRC_TOP2, 24, 1), + MUX(CLK_MOUT_GPLL, "mout_gpll", mout_gpll_p, SRC_TOP2, 28, 1), MUX(0, "mout_aclk200_disp1_sub", mout_aclk200_sub_p, SRC_TOP3, 4, 1), MUX(0, "mout_aclk266_gscl_sub", mout_aclk266_sub_p, SRC_TOP3, 8, 1), @@ -351,6 +382,8 @@ static struct samsung_div_clock exynos5250_div_clks[] __initdata = { DIV(0, "div_aclk200", "mout_aclk200", DIV_TOP0, 12, 3), DIV(0, "div_aclk266", "mout_mpll_user", DIV_TOP0, 16, 3), DIV(0, "div_aclk333", "mout_aclk333", DIV_TOP0, 20, 3), + DIV(0, "div_aclk400_g3d", "mout_aclk400_g3d", DIV_TOP0, + 24, 3), DIV(0, "div_aclk66_pre", "mout_mpll_user", DIV_TOP1, 24, 3), @@ -428,6 +461,7 @@ static struct samsung_gate_clock exynos5250_gate_clks[] __initdata = { * CMU_ACP */ GATE(CLK_MDMA0, "mdma0", "div_aclk266", GATE_IP_ACP, 1, 0, 0), + GATE(CLK_SSS, "sss", "div_aclk266", GATE_IP_ACP, 2, 0, 0), GATE(CLK_G2D, "g2d", "div_aclk200", GATE_IP_ACP, 3, 0, 0), GATE(CLK_SMMU_MDMA0, "smmu_mdma0", "div_aclk266", GATE_IP_ACP, 5, 0, 0), @@ -533,7 +567,8 @@ static struct samsung_gate_clock exynos5250_gate_clks[] __initdata = { 0), GATE(CLK_SMMU_MFCL, "smmu_mfcl", "mout_aclk333_sub", GATE_IP_MFC, 2, 0, 0), - + GATE(CLK_G3D, "g3d", "div_aclk400_g3d", GATE_IP_G3D, 0, + CLK_SET_RATE_PARENT, 0), GATE(CLK_ROTATOR, "rotator", "div_aclk266", GATE_IP_GEN, 1, 0, 0), GATE(CLK_JPEG, "jpeg", "div_aclk166", GATE_IP_GEN, 2, 0, 0), GATE(CLK_MDMA1, "mdma1", "div_aclk266", GATE_IP_GEN, 4, 0, 0), @@ -686,6 +721,9 @@ static struct of_device_id ext_clk_match[] __initdata = { /* register exynox5250 clocks */ static void __init exynos5250_clk_init(struct device_node *np) { + struct samsung_clk_provider *ctx; + unsigned int tmp; + if (np) { reg_base = of_iomap(np, 0); if (!reg_base) @@ -694,11 +732,13 @@ static void __init exynos5250_clk_init(struct device_node *np) panic("%s: unable to determine soc\n", __func__); } - samsung_clk_init(np, reg_base, CLK_NR_CLKS); - samsung_clk_of_register_fixed_ext(exynos5250_fixed_rate_ext_clks, + ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS); + if (!ctx) + panic("%s: unable to allocate context.\n", __func__); + samsung_clk_of_register_fixed_ext(ctx, exynos5250_fixed_rate_ext_clks, ARRAY_SIZE(exynos5250_fixed_rate_ext_clks), ext_clk_match); - samsung_clk_register_mux(exynos5250_pll_pmux_clks, + samsung_clk_register_mux(ctx, exynos5250_pll_pmux_clks, ARRAY_SIZE(exynos5250_pll_pmux_clks)); if (_get_rate("fin_pll") == 24 * MHZ) { @@ -709,19 +749,40 @@ static void __init exynos5250_clk_init(struct device_node *np) if (_get_rate("mout_vpllsrc") == 24 * MHZ) exynos5250_plls[vpll].rate_table = vpll_24mhz_tbl; - samsung_clk_register_pll(exynos5250_plls, ARRAY_SIZE(exynos5250_plls), - reg_base); - samsung_clk_register_fixed_rate(exynos5250_fixed_rate_clks, + samsung_clk_register_pll(ctx, exynos5250_plls, + ARRAY_SIZE(exynos5250_plls), + reg_base); + samsung_clk_register_fixed_rate(ctx, exynos5250_fixed_rate_clks, ARRAY_SIZE(exynos5250_fixed_rate_clks)); - samsung_clk_register_fixed_factor(exynos5250_fixed_factor_clks, + samsung_clk_register_fixed_factor(ctx, exynos5250_fixed_factor_clks, ARRAY_SIZE(exynos5250_fixed_factor_clks)); - samsung_clk_register_mux(exynos5250_mux_clks, + samsung_clk_register_mux(ctx, exynos5250_mux_clks, ARRAY_SIZE(exynos5250_mux_clks)); - samsung_clk_register_div(exynos5250_div_clks, + samsung_clk_register_div(ctx, exynos5250_div_clks, ARRAY_SIZE(exynos5250_div_clks)); - samsung_clk_register_gate(exynos5250_gate_clks, + samsung_clk_register_gate(ctx, exynos5250_gate_clks, ARRAY_SIZE(exynos5250_gate_clks)); + /* + * Enable arm clock down (in idle) and set arm divider + * ratios in WFI/WFE state. + */ + tmp = (PWR_CTRL1_CORE2_DOWN_RATIO | PWR_CTRL1_CORE1_DOWN_RATIO | + PWR_CTRL1_DIV2_DOWN_EN | PWR_CTRL1_DIV1_DOWN_EN | + PWR_CTRL1_USE_CORE1_WFE | PWR_CTRL1_USE_CORE0_WFE | + PWR_CTRL1_USE_CORE1_WFI | PWR_CTRL1_USE_CORE0_WFI); + __raw_writel(tmp, reg_base + PWR_CTRL1); + + /* + * Enable arm clock up (on exiting idle). Set arm divider + * ratios when not in idle along with the standby duration + * ratios. + */ + tmp = (PWR_CTRL2_DIV2_UP_EN | PWR_CTRL2_DIV1_UP_EN | + PWR_CTRL2_DUR_STANDBY2_VAL | PWR_CTRL2_DUR_STANDBY1_VAL | + PWR_CTRL2_CORE2_UP_RATIO | PWR_CTRL2_CORE1_UP_RATIO); + __raw_writel(tmp, reg_base + PWR_CTRL2); + exynos5250_clk_sleep_init(); pr_info("Exynos5250: clock setup completed, armclk=%ld\n", diff --git a/drivers/clk/samsung/clk-exynos5260.c b/drivers/clk/samsung/clk-exynos5260.c new file mode 100644 index 000000000000..64596ba58df1 --- /dev/null +++ b/drivers/clk/samsung/clk-exynos5260.c @@ -0,0 +1,1980 @@ +/* + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * Author: Rahul Sharma <rahul.sharma@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common Clock Framework support for Exynos5260 SoC. + */ + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/syscore_ops.h> + +#include "clk-exynos5260.h" +#include "clk.h" +#include "clk-pll.h" + +#include <dt-bindings/clock/exynos5260-clk.h> + +static LIST_HEAD(clock_reg_cache_list); + +struct exynos5260_clock_reg_cache { + struct list_head node; + void __iomem *reg_base; + struct samsung_clk_reg_dump *rdump; + unsigned int rd_num; +}; + +struct exynos5260_cmu_info { + /* list of pll clocks and respective count */ + struct samsung_pll_clock *pll_clks; + unsigned int nr_pll_clks; + /* list of mux clocks and respective count */ + struct samsung_mux_clock *mux_clks; + unsigned int nr_mux_clks; + /* list of div clocks and respective count */ + struct samsung_div_clock *div_clks; + unsigned int nr_div_clks; + /* list of gate clocks and respective count */ + struct samsung_gate_clock *gate_clks; + unsigned int nr_gate_clks; + /* list of fixed clocks and respective count */ + struct samsung_fixed_rate_clock *fixed_clks; + unsigned int nr_fixed_clks; + /* total number of clocks with IDs assigned*/ + unsigned int nr_clk_ids; + + /* list and number of clocks registers */ + unsigned long *clk_regs; + unsigned int nr_clk_regs; +}; + +/* + * Applicable for all 2550 Type PLLS for Exynos5260, listed below + * DISP_PLL, EGL_PLL, KFC_PLL, MEM_PLL, BUS_PLL, MEDIA_PLL, G3D_PLL. + */ +static struct samsung_pll_rate_table pll2550_24mhz_tbl[] __initdata = { + PLL_35XX_RATE(1700000000, 425, 6, 0), + PLL_35XX_RATE(1600000000, 200, 3, 0), + PLL_35XX_RATE(1500000000, 250, 4, 0), + PLL_35XX_RATE(1400000000, 175, 3, 0), + PLL_35XX_RATE(1300000000, 325, 6, 0), + PLL_35XX_RATE(1200000000, 400, 4, 1), + PLL_35XX_RATE(1100000000, 275, 3, 1), + PLL_35XX_RATE(1000000000, 250, 3, 1), + PLL_35XX_RATE(933000000, 311, 4, 1), + PLL_35XX_RATE(900000000, 300, 4, 1), + PLL_35XX_RATE(800000000, 200, 3, 1), + PLL_35XX_RATE(733000000, 733, 12, 1), + PLL_35XX_RATE(700000000, 175, 3, 1), + PLL_35XX_RATE(667000000, 667, 12, 1), + PLL_35XX_RATE(633000000, 211, 4, 1), + PLL_35XX_RATE(620000000, 310, 3, 2), + PLL_35XX_RATE(600000000, 400, 4, 2), + PLL_35XX_RATE(543000000, 362, 4, 2), + PLL_35XX_RATE(533000000, 533, 6, 2), + PLL_35XX_RATE(500000000, 250, 3, 2), + PLL_35XX_RATE(450000000, 300, 4, 2), + PLL_35XX_RATE(400000000, 200, 3, 2), + PLL_35XX_RATE(350000000, 175, 3, 2), + PLL_35XX_RATE(300000000, 400, 4, 3), + PLL_35XX_RATE(266000000, 266, 3, 3), + PLL_35XX_RATE(200000000, 200, 3, 3), + PLL_35XX_RATE(160000000, 160, 3, 3), +}; + +/* + * Applicable for 2650 Type PLL for AUD_PLL. + */ +static struct samsung_pll_rate_table pll2650_24mhz_tbl[] __initdata = { + PLL_36XX_RATE(1600000000, 200, 3, 0, 0), + PLL_36XX_RATE(1200000000, 100, 2, 0, 0), + PLL_36XX_RATE(1000000000, 250, 3, 1, 0), + PLL_36XX_RATE(800000000, 200, 3, 1, 0), + PLL_36XX_RATE(600000000, 100, 2, 1, 0), + PLL_36XX_RATE(532000000, 266, 3, 2, 0), + PLL_36XX_RATE(480000000, 160, 2, 2, 0), + PLL_36XX_RATE(432000000, 144, 2, 2, 0), + PLL_36XX_RATE(400000000, 200, 3, 2, 0), + PLL_36XX_RATE(394073130, 459, 7, 2, 49282), + PLL_36XX_RATE(333000000, 111, 2, 2, 0), + PLL_36XX_RATE(300000000, 100, 2, 2, 0), + PLL_36XX_RATE(266000000, 266, 3, 3, 0), + PLL_36XX_RATE(200000000, 200, 3, 3, 0), + PLL_36XX_RATE(166000000, 166, 3, 3, 0), + PLL_36XX_RATE(133000000, 266, 3, 4, 0), + PLL_36XX_RATE(100000000, 200, 3, 4, 0), + PLL_36XX_RATE(66000000, 176, 2, 5, 0), +}; + +#ifdef CONFIG_PM_SLEEP + +static int exynos5260_clk_suspend(void) +{ + struct exynos5260_clock_reg_cache *cache; + + list_for_each_entry(cache, &clock_reg_cache_list, node) + samsung_clk_save(cache->reg_base, cache->rdump, + cache->rd_num); + + return 0; +} + +static void exynos5260_clk_resume(void) +{ + struct exynos5260_clock_reg_cache *cache; + + list_for_each_entry(cache, &clock_reg_cache_list, node) + samsung_clk_restore(cache->reg_base, cache->rdump, + cache->rd_num); +} + +static struct syscore_ops exynos5260_clk_syscore_ops = { + .suspend = exynos5260_clk_suspend, + .resume = exynos5260_clk_resume, +}; + +static void exynos5260_clk_sleep_init(void __iomem *reg_base, + unsigned long *rdump, + unsigned long nr_rdump) +{ + struct exynos5260_clock_reg_cache *reg_cache; + + reg_cache = kzalloc(sizeof(struct exynos5260_clock_reg_cache), + GFP_KERNEL); + if (!reg_cache) + panic("could not allocate register cache.\n"); + + reg_cache->rdump = samsung_clk_alloc_reg_dump(rdump, nr_rdump); + + if (!reg_cache->rdump) + panic("could not allocate register dump storage.\n"); + + if (list_empty(&clock_reg_cache_list)) + register_syscore_ops(&exynos5260_clk_syscore_ops); + + reg_cache->rd_num = nr_rdump; + reg_cache->reg_base = reg_base; + list_add_tail(®_cache->node, &clock_reg_cache_list); +} + +#else +static void exynos5260_clk_sleep_init(void __iomem *reg_base, + unsigned long *rdump, + unsigned long nr_rdump){} +#endif + +/* + * Common function which registers plls, muxes, dividers and gates + * for each CMU. It also add CMU register list to register cache. + */ + +void __init exynos5260_cmu_register_one(struct device_node *np, + struct exynos5260_cmu_info *cmu) +{ + void __iomem *reg_base; + struct samsung_clk_provider *ctx; + + reg_base = of_iomap(np, 0); + if (!reg_base) + panic("%s: failed to map registers\n", __func__); + + ctx = samsung_clk_init(np, reg_base, cmu->nr_clk_ids); + if (!ctx) + panic("%s: unable to alllocate ctx\n", __func__); + + if (cmu->pll_clks) + samsung_clk_register_pll(ctx, cmu->pll_clks, cmu->nr_pll_clks, + reg_base); + if (cmu->mux_clks) + samsung_clk_register_mux(ctx, cmu->mux_clks, + cmu->nr_mux_clks); + if (cmu->div_clks) + samsung_clk_register_div(ctx, cmu->div_clks, cmu->nr_div_clks); + if (cmu->gate_clks) + samsung_clk_register_gate(ctx, cmu->gate_clks, + cmu->nr_gate_clks); + if (cmu->fixed_clks) + samsung_clk_register_fixed_rate(ctx, cmu->fixed_clks, + cmu->nr_fixed_clks); + if (cmu->clk_regs) + exynos5260_clk_sleep_init(reg_base, cmu->clk_regs, + cmu->nr_clk_regs); +} + + +/* CMU_AUD */ + +static unsigned long aud_clk_regs[] __initdata = { + MUX_SEL_AUD, + DIV_AUD0, + DIV_AUD1, + EN_ACLK_AUD, + EN_PCLK_AUD, + EN_SCLK_AUD, + EN_IP_AUD, +}; + +PNAME(mout_aud_pll_user_p) = {"fin_pll", "fout_aud_pll"}; +PNAME(mout_sclk_aud_i2s_p) = {"mout_aud_pll_user", "ioclk_i2s_cdclk"}; +PNAME(mout_sclk_aud_pcm_p) = {"mout_aud_pll_user", "ioclk_pcm_extclk"}; + +struct samsung_mux_clock aud_mux_clks[] __initdata = { + MUX(AUD_MOUT_AUD_PLL_USER, "mout_aud_pll_user", mout_aud_pll_user_p, + MUX_SEL_AUD, 0, 1), + MUX(AUD_MOUT_SCLK_AUD_I2S, "mout_sclk_aud_i2s", mout_sclk_aud_i2s_p, + MUX_SEL_AUD, 4, 1), + MUX(AUD_MOUT_SCLK_AUD_PCM, "mout_sclk_aud_pcm", mout_sclk_aud_pcm_p, + MUX_SEL_AUD, 8, 1), +}; + +struct samsung_div_clock aud_div_clks[] __initdata = { + DIV(AUD_DOUT_ACLK_AUD_131, "dout_aclk_aud_131", "mout_aud_pll_user", + DIV_AUD0, 0, 4), + + DIV(AUD_DOUT_SCLK_AUD_I2S, "dout_sclk_aud_i2s", "mout_sclk_aud_i2s", + DIV_AUD1, 0, 4), + DIV(AUD_DOUT_SCLK_AUD_PCM, "dout_sclk_aud_pcm", "mout_sclk_aud_pcm", + DIV_AUD1, 4, 8), + DIV(AUD_DOUT_SCLK_AUD_UART, "dout_sclk_aud_uart", "mout_aud_pll_user", + DIV_AUD1, 12, 4), +}; + +struct samsung_gate_clock aud_gate_clks[] __initdata = { + GATE(AUD_SCLK_I2S, "sclk_aud_i2s", "dout_sclk_aud_i2s", + EN_SCLK_AUD, 0, CLK_SET_RATE_PARENT, 0), + GATE(AUD_SCLK_PCM, "sclk_aud_pcm", "dout_sclk_aud_pcm", + EN_SCLK_AUD, 1, CLK_SET_RATE_PARENT, 0), + GATE(AUD_SCLK_AUD_UART, "sclk_aud_uart", "dout_sclk_aud_uart", + EN_SCLK_AUD, 2, CLK_SET_RATE_PARENT, 0), + + GATE(AUD_CLK_SRAMC, "clk_sramc", "dout_aclk_aud_131", EN_IP_AUD, + 0, 0, 0), + GATE(AUD_CLK_DMAC, "clk_dmac", "dout_aclk_aud_131", + EN_IP_AUD, 1, 0, 0), + GATE(AUD_CLK_I2S, "clk_i2s", "dout_aclk_aud_131", EN_IP_AUD, 2, 0, 0), + GATE(AUD_CLK_PCM, "clk_pcm", "dout_aclk_aud_131", EN_IP_AUD, 3, 0, 0), + GATE(AUD_CLK_AUD_UART, "clk_aud_uart", "dout_aclk_aud_131", + EN_IP_AUD, 4, 0, 0), +}; + +static void __init exynos5260_clk_aud_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu = {0}; + + cmu.mux_clks = aud_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(aud_mux_clks); + cmu.div_clks = aud_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(aud_div_clks); + cmu.gate_clks = aud_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(aud_gate_clks); + cmu.nr_clk_ids = AUD_NR_CLK; + cmu.clk_regs = aud_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(aud_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_aud, "samsung,exynos5260-clock-aud", + exynos5260_clk_aud_init); + + +/* CMU_DISP */ + +static unsigned long disp_clk_regs[] __initdata = { + MUX_SEL_DISP0, + MUX_SEL_DISP1, + MUX_SEL_DISP2, + MUX_SEL_DISP3, + MUX_SEL_DISP4, + DIV_DISP, + EN_ACLK_DISP, + EN_PCLK_DISP, + EN_SCLK_DISP0, + EN_SCLK_DISP1, + EN_IP_DISP, + EN_IP_DISP_BUS, +}; + +PNAME(mout_phyclk_dptx_phy_ch3_txd_clk_user_p) = {"fin_pll", + "phyclk_dptx_phy_ch3_txd_clk"}; +PNAME(mout_phyclk_dptx_phy_ch2_txd_clk_user_p) = {"fin_pll", + "phyclk_dptx_phy_ch2_txd_clk"}; +PNAME(mout_phyclk_dptx_phy_ch1_txd_clk_user_p) = {"fin_pll", + "phyclk_dptx_phy_ch1_txd_clk"}; +PNAME(mout_phyclk_dptx_phy_ch0_txd_clk_user_p) = {"fin_pll", + "phyclk_dptx_phy_ch0_txd_clk"}; +PNAME(mout_aclk_disp_222_user_p) = {"fin_pll", "dout_aclk_disp_222"}; +PNAME(mout_sclk_disp_pixel_user_p) = {"fin_pll", "dout_sclk_disp_pixel"}; +PNAME(mout_aclk_disp_333_user_p) = {"fin_pll", "dout_aclk_disp_333"}; +PNAME(mout_phyclk_hdmi_phy_tmds_clko_user_p) = {"fin_pll", + "phyclk_hdmi_phy_tmds_clko"}; +PNAME(mout_phyclk_hdmi_phy_ref_clko_user_p) = {"fin_pll", + "phyclk_hdmi_phy_ref_clko"}; +PNAME(mout_phyclk_hdmi_phy_pixel_clko_user_p) = {"fin_pll", + "phyclk_hdmi_phy_pixel_clko"}; +PNAME(mout_phyclk_hdmi_link_o_tmds_clkhi_user_p) = {"fin_pll", + "phyclk_hdmi_link_o_tmds_clkhi"}; +PNAME(mout_phyclk_mipi_dphy_4l_m_txbyte_clkhs_p) = {"fin_pll", + "phyclk_mipi_dphy_4l_m_txbyte_clkhs"}; +PNAME(mout_phyclk_dptx_phy_o_ref_clk_24m_user_p) = {"fin_pll", + "phyclk_dptx_phy_o_ref_clk_24m"}; +PNAME(mout_phyclk_dptx_phy_clk_div2_user_p) = {"fin_pll", + "phyclk_dptx_phy_clk_div2"}; +PNAME(mout_sclk_hdmi_pixel_p) = {"mout_sclk_disp_pixel_user", + "mout_aclk_disp_222_user"}; +PNAME(mout_phyclk_mipi_dphy_4lmrxclk_esc0_user_p) = {"fin_pll", + "phyclk_mipi_dphy_4l_m_rxclkesc0"}; +PNAME(mout_sclk_hdmi_spdif_p) = {"fin_pll", "ioclk_spdif_extclk", + "dout_aclk_peri_aud", "phyclk_hdmi_phy_ref_cko"}; + +struct samsung_mux_clock disp_mux_clks[] __initdata = { + MUX(DISP_MOUT_ACLK_DISP_333_USER, "mout_aclk_disp_333_user", + mout_aclk_disp_333_user_p, + MUX_SEL_DISP0, 0, 1), + MUX(DISP_MOUT_SCLK_DISP_PIXEL_USER, "mout_sclk_disp_pixel_user", + mout_sclk_disp_pixel_user_p, + MUX_SEL_DISP0, 4, 1), + MUX(DISP_MOUT_ACLK_DISP_222_USER, "mout_aclk_disp_222_user", + mout_aclk_disp_222_user_p, + MUX_SEL_DISP0, 8, 1), + MUX(DISP_MOUT_PHYCLK_DPTX_PHY_CH0_TXD_CLK_USER, + "mout_phyclk_dptx_phy_ch0_txd_clk_user", + mout_phyclk_dptx_phy_ch0_txd_clk_user_p, + MUX_SEL_DISP0, 16, 1), + MUX(DISP_MOUT_PHYCLK_DPTX_PHY_CH1_TXD_CLK_USER, + "mout_phyclk_dptx_phy_ch1_txd_clk_user", + mout_phyclk_dptx_phy_ch1_txd_clk_user_p, + MUX_SEL_DISP0, 20, 1), + MUX(DISP_MOUT_PHYCLK_DPTX_PHY_CH2_TXD_CLK_USER, + "mout_phyclk_dptx_phy_ch2_txd_clk_user", + mout_phyclk_dptx_phy_ch2_txd_clk_user_p, + MUX_SEL_DISP0, 24, 1), + MUX(DISP_MOUT_PHYCLK_DPTX_PHY_CH3_TXD_CLK_USER, + "mout_phyclk_dptx_phy_ch3_txd_clk_user", + mout_phyclk_dptx_phy_ch3_txd_clk_user_p, + MUX_SEL_DISP0, 28, 1), + + MUX(DISP_MOUT_PHYCLK_DPTX_PHY_CLK_DIV2_USER, + "mout_phyclk_dptx_phy_clk_div2_user", + mout_phyclk_dptx_phy_clk_div2_user_p, + MUX_SEL_DISP1, 0, 1), + MUX(DISP_MOUT_PHYCLK_DPTX_PHY_O_REF_CLK_24M_USER, + "mout_phyclk_dptx_phy_o_ref_clk_24m_user", + mout_phyclk_dptx_phy_o_ref_clk_24m_user_p, + MUX_SEL_DISP1, 4, 1), + MUX(DISP_MOUT_PHYCLK_MIPI_DPHY_4L_M_TXBYTE_CLKHS, + "mout_phyclk_mipi_dphy_4l_m_txbyte_clkhs", + mout_phyclk_mipi_dphy_4l_m_txbyte_clkhs_p, + MUX_SEL_DISP1, 8, 1), + MUX(DISP_MOUT_PHYCLK_HDMI_LINK_O_TMDS_CLKHI_USER, + "mout_phyclk_hdmi_link_o_tmds_clkhi_user", + mout_phyclk_hdmi_link_o_tmds_clkhi_user_p, + MUX_SEL_DISP1, 16, 1), + MUX(DISP_MOUT_HDMI_PHY_PIXEL, + "mout_phyclk_hdmi_phy_pixel_clko_user", + mout_phyclk_hdmi_phy_pixel_clko_user_p, + MUX_SEL_DISP1, 20, 1), + MUX(DISP_MOUT_PHYCLK_HDMI_PHY_REF_CLKO_USER, + "mout_phyclk_hdmi_phy_ref_clko_user", + mout_phyclk_hdmi_phy_ref_clko_user_p, + MUX_SEL_DISP1, 24, 1), + MUX(DISP_MOUT_PHYCLK_HDMI_PHY_TMDS_CLKO_USER, + "mout_phyclk_hdmi_phy_tmds_clko_user", + mout_phyclk_hdmi_phy_tmds_clko_user_p, + MUX_SEL_DISP1, 28, 1), + + MUX(DISP_MOUT_PHYCLK_MIPI_DPHY_4LMRXCLK_ESC0_USER, + "mout_phyclk_mipi_dphy_4lmrxclk_esc0_user", + mout_phyclk_mipi_dphy_4lmrxclk_esc0_user_p, + MUX_SEL_DISP2, 0, 1), + MUX(DISP_MOUT_SCLK_HDMI_PIXEL, "mout_sclk_hdmi_pixel", + mout_sclk_hdmi_pixel_p, + MUX_SEL_DISP2, 4, 1), + + MUX(DISP_MOUT_SCLK_HDMI_SPDIF, "mout_sclk_hdmi_spdif", + mout_sclk_hdmi_spdif_p, + MUX_SEL_DISP4, 4, 2), +}; + +struct samsung_div_clock disp_div_clks[] __initdata = { + DIV(DISP_DOUT_PCLK_DISP_111, "dout_pclk_disp_111", + "mout_aclk_disp_222_user", + DIV_DISP, 8, 4), + DIV(DISP_DOUT_SCLK_FIMD1_EXTCLKPLL, "dout_sclk_fimd1_extclkpll", + "mout_sclk_disp_pixel_user", + DIV_DISP, 12, 4), + DIV(DISP_DOUT_SCLK_HDMI_PHY_PIXEL_CLKI, + "dout_sclk_hdmi_phy_pixel_clki", + "mout_sclk_hdmi_pixel", + DIV_DISP, 16, 4), +}; + +struct samsung_gate_clock disp_gate_clks[] __initdata = { + GATE(DISP_MOUT_HDMI_PHY_PIXEL_USER, "sclk_hdmi_link_i_pixel", + "mout_phyclk_hdmi_phy_pixel_clko_user", + EN_SCLK_DISP0, 26, CLK_SET_RATE_PARENT, 0), + GATE(DISP_SCLK_PIXEL, "sclk_hdmi_phy_pixel_clki", + "dout_sclk_hdmi_phy_pixel_clki", + EN_SCLK_DISP0, 29, CLK_SET_RATE_PARENT, 0), + + GATE(DISP_CLK_DP, "clk_dptx_link", "mout_aclk_disp_222_user", + EN_IP_DISP, 4, 0, 0), + GATE(DISP_CLK_DPPHY, "clk_dptx_phy", "mout_aclk_disp_222_user", + EN_IP_DISP, 5, 0, 0), + GATE(DISP_CLK_DSIM1, "clk_dsim1", "mout_aclk_disp_222_user", + EN_IP_DISP, 6, 0, 0), + GATE(DISP_CLK_FIMD1, "clk_fimd1", "mout_aclk_disp_222_user", + EN_IP_DISP, 7, 0, 0), + GATE(DISP_CLK_HDMI, "clk_hdmi", "mout_aclk_disp_222_user", + EN_IP_DISP, 8, 0, 0), + GATE(DISP_CLK_HDMIPHY, "clk_hdmiphy", "mout_aclk_disp_222_user", + EN_IP_DISP, 9, 0, 0), + GATE(DISP_CLK_MIPIPHY, "clk_mipi_dphy", "mout_aclk_disp_222_user", + EN_IP_DISP, 10, 0, 0), + GATE(DISP_CLK_MIXER, "clk_mixer", "mout_aclk_disp_222_user", + EN_IP_DISP, 11, 0, 0), + GATE(DISP_CLK_PIXEL_DISP, "clk_pixel_disp", "mout_aclk_disp_222_user", + EN_IP_DISP, 12, CLK_IGNORE_UNUSED, 0), + GATE(DISP_CLK_PIXEL_MIXER, "clk_pixel_mixer", "mout_aclk_disp_222_user", + EN_IP_DISP, 13, CLK_IGNORE_UNUSED, 0), + GATE(DISP_CLK_SMMU_FIMD1M0, "clk_smmu3_fimd1m0", + "mout_aclk_disp_222_user", + EN_IP_DISP, 22, 0, 0), + GATE(DISP_CLK_SMMU_FIMD1M1, "clk_smmu3_fimd1m1", + "mout_aclk_disp_222_user", + EN_IP_DISP, 23, 0, 0), + GATE(DISP_CLK_SMMU_TV, "clk_smmu3_tv", "mout_aclk_disp_222_user", + EN_IP_DISP, 25, 0, 0), +}; + +static void __init exynos5260_clk_disp_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu = {0}; + + cmu.mux_clks = disp_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(disp_mux_clks); + cmu.div_clks = disp_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(disp_div_clks); + cmu.gate_clks = disp_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(disp_gate_clks); + cmu.nr_clk_ids = DISP_NR_CLK; + cmu.clk_regs = disp_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(disp_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_disp, "samsung,exynos5260-clock-disp", + exynos5260_clk_disp_init); + + +/* CMU_EGL */ + +static unsigned long egl_clk_regs[] __initdata = { + EGL_PLL_LOCK, + EGL_PLL_CON0, + EGL_PLL_CON1, + EGL_PLL_FREQ_DET, + MUX_SEL_EGL, + MUX_ENABLE_EGL, + DIV_EGL, + DIV_EGL_PLL_FDET, + EN_ACLK_EGL, + EN_PCLK_EGL, + EN_SCLK_EGL, +}; + +PNAME(mout_egl_b_p) = {"mout_egl_pll", "dout_bus_pll"}; +PNAME(mout_egl_pll_p) = {"fin_pll", "fout_egl_pll"}; + +struct samsung_mux_clock egl_mux_clks[] __initdata = { + MUX(EGL_MOUT_EGL_PLL, "mout_egl_pll", mout_egl_pll_p, + MUX_SEL_EGL, 4, 1), + MUX(EGL_MOUT_EGL_B, "mout_egl_b", mout_egl_b_p, MUX_SEL_EGL, 16, 1), +}; + +struct samsung_div_clock egl_div_clks[] __initdata = { + DIV(EGL_DOUT_EGL1, "dout_egl1", "mout_egl_b", DIV_EGL, 0, 3), + DIV(EGL_DOUT_EGL2, "dout_egl2", "dout_egl1", DIV_EGL, 4, 3), + DIV(EGL_DOUT_ACLK_EGL, "dout_aclk_egl", "dout_egl2", DIV_EGL, 8, 3), + DIV(EGL_DOUT_PCLK_EGL, "dout_pclk_egl", "dout_egl_atclk", + DIV_EGL, 12, 3), + DIV(EGL_DOUT_EGL_ATCLK, "dout_egl_atclk", "dout_egl2", DIV_EGL, 16, 3), + DIV(EGL_DOUT_EGL_PCLK_DBG, "dout_egl_pclk_dbg", "dout_egl_atclk", + DIV_EGL, 20, 3), + DIV(EGL_DOUT_EGL_PLL, "dout_egl_pll", "mout_egl_b", DIV_EGL, 24, 3), +}; + +static struct samsung_pll_clock egl_pll_clks[] __initdata = { + PLL(pll_2550xx, EGL_FOUT_EGL_PLL, "fout_egl_pll", "fin_pll", + EGL_PLL_LOCK, EGL_PLL_CON0, + pll2550_24mhz_tbl), +}; + +static void __init exynos5260_clk_egl_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu = {0}; + + cmu.pll_clks = egl_pll_clks; + cmu.nr_pll_clks = ARRAY_SIZE(egl_pll_clks); + cmu.mux_clks = egl_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(egl_mux_clks); + cmu.div_clks = egl_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(egl_div_clks); + cmu.nr_clk_ids = EGL_NR_CLK; + cmu.clk_regs = egl_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(egl_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_egl, "samsung,exynos5260-clock-egl", + exynos5260_clk_egl_init); + + +/* CMU_FSYS */ + +static unsigned long fsys_clk_regs[] __initdata = { + MUX_SEL_FSYS0, + MUX_SEL_FSYS1, + EN_ACLK_FSYS, + EN_ACLK_FSYS_SECURE_RTIC, + EN_ACLK_FSYS_SECURE_SMMU_RTIC, + EN_SCLK_FSYS, + EN_IP_FSYS, + EN_IP_FSYS_SECURE_RTIC, + EN_IP_FSYS_SECURE_SMMU_RTIC, +}; + +PNAME(mout_phyclk_usbhost20_phyclk_user_p) = {"fin_pll", + "phyclk_usbhost20_phy_phyclock"}; +PNAME(mout_phyclk_usbhost20_freeclk_user_p) = {"fin_pll", + "phyclk_usbhost20_phy_freeclk"}; +PNAME(mout_phyclk_usbhost20_clk48mohci_user_p) = {"fin_pll", + "phyclk_usbhost20_phy_clk48mohci"}; +PNAME(mout_phyclk_usbdrd30_pipe_pclk_user_p) = {"fin_pll", + "phyclk_usbdrd30_udrd30_pipe_pclk"}; +PNAME(mout_phyclk_usbdrd30_phyclock_user_p) = {"fin_pll", + "phyclk_usbdrd30_udrd30_phyclock"}; + +struct samsung_mux_clock fsys_mux_clks[] __initdata = { + MUX(FSYS_MOUT_PHYCLK_USBDRD30_PHYCLOCK_USER, + "mout_phyclk_usbdrd30_phyclock_user", + mout_phyclk_usbdrd30_phyclock_user_p, + MUX_SEL_FSYS1, 0, 1), + MUX(FSYS_MOUT_PHYCLK_USBDRD30_PIPE_PCLK_USER, + "mout_phyclk_usbdrd30_pipe_pclk_user", + mout_phyclk_usbdrd30_pipe_pclk_user_p, + MUX_SEL_FSYS1, 4, 1), + MUX(FSYS_MOUT_PHYCLK_USBHOST20_CLK48MOHCI_USER, + "mout_phyclk_usbhost20_clk48mohci_user", + mout_phyclk_usbhost20_clk48mohci_user_p, + MUX_SEL_FSYS1, 8, 1), + MUX(FSYS_MOUT_PHYCLK_USBHOST20_FREECLK_USER, + "mout_phyclk_usbhost20_freeclk_user", + mout_phyclk_usbhost20_freeclk_user_p, + MUX_SEL_FSYS1, 12, 1), + MUX(FSYS_MOUT_PHYCLK_USBHOST20_PHYCLK_USER, + "mout_phyclk_usbhost20_phyclk_user", + mout_phyclk_usbhost20_phyclk_user_p, + MUX_SEL_FSYS1, 16, 1), +}; + +struct samsung_gate_clock fsys_gate_clks[] __initdata = { + GATE(FSYS_PHYCLK_USBHOST20, "phyclk_usbhost20_phyclock", + "mout_phyclk_usbdrd30_phyclock_user", + EN_SCLK_FSYS, 1, 0, 0), + GATE(FSYS_PHYCLK_USBDRD30, "phyclk_usbdrd30_udrd30_phyclock_g", + "mout_phyclk_usbdrd30_phyclock_user", + EN_SCLK_FSYS, 7, 0, 0), + + GATE(FSYS_CLK_MMC0, "clk_mmc0", "dout_aclk_fsys_200", + EN_IP_FSYS, 6, 0, 0), + GATE(FSYS_CLK_MMC1, "clk_mmc1", "dout_aclk_fsys_200", + EN_IP_FSYS, 7, 0, 0), + GATE(FSYS_CLK_MMC2, "clk_mmc2", "dout_aclk_fsys_200", + EN_IP_FSYS, 8, 0, 0), + GATE(FSYS_CLK_PDMA, "clk_pdma", "dout_aclk_fsys_200", + EN_IP_FSYS, 9, 0, 0), + GATE(FSYS_CLK_SROMC, "clk_sromc", "dout_aclk_fsys_200", + EN_IP_FSYS, 13, 0, 0), + GATE(FSYS_CLK_USBDRD30, "clk_usbdrd30", "dout_aclk_fsys_200", + EN_IP_FSYS, 14, 0, 0), + GATE(FSYS_CLK_USBHOST20, "clk_usbhost20", "dout_aclk_fsys_200", + EN_IP_FSYS, 15, 0, 0), + GATE(FSYS_CLK_USBLINK, "clk_usblink", "dout_aclk_fsys_200", + EN_IP_FSYS, 18, 0, 0), + GATE(FSYS_CLK_TSI, "clk_tsi", "dout_aclk_fsys_200", + EN_IP_FSYS, 20, 0, 0), + + GATE(FSYS_CLK_RTIC, "clk_rtic", "dout_aclk_fsys_200", + EN_IP_FSYS_SECURE_RTIC, 11, 0, 0), + GATE(FSYS_CLK_SMMU_RTIC, "clk_smmu_rtic", "dout_aclk_fsys_200", + EN_IP_FSYS_SECURE_SMMU_RTIC, 12, 0, 0), +}; + +static void __init exynos5260_clk_fsys_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu = {0}; + + cmu.mux_clks = fsys_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(fsys_mux_clks); + cmu.gate_clks = fsys_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(fsys_gate_clks); + cmu.nr_clk_ids = FSYS_NR_CLK; + cmu.clk_regs = fsys_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(fsys_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_fsys, "samsung,exynos5260-clock-fsys", + exynos5260_clk_fsys_init); + + +/* CMU_G2D */ + +static unsigned long g2d_clk_regs[] __initdata = { + MUX_SEL_G2D, + MUX_STAT_G2D, + DIV_G2D, + EN_ACLK_G2D, + EN_ACLK_G2D_SECURE_SSS, + EN_ACLK_G2D_SECURE_SLIM_SSS, + EN_ACLK_G2D_SECURE_SMMU_SLIM_SSS, + EN_ACLK_G2D_SECURE_SMMU_SSS, + EN_ACLK_G2D_SECURE_SMMU_MDMA, + EN_ACLK_G2D_SECURE_SMMU_G2D, + EN_PCLK_G2D, + EN_PCLK_G2D_SECURE_SMMU_SLIM_SSS, + EN_PCLK_G2D_SECURE_SMMU_SSS, + EN_PCLK_G2D_SECURE_SMMU_MDMA, + EN_PCLK_G2D_SECURE_SMMU_G2D, + EN_IP_G2D, + EN_IP_G2D_SECURE_SSS, + EN_IP_G2D_SECURE_SLIM_SSS, + EN_IP_G2D_SECURE_SMMU_SLIM_SSS, + EN_IP_G2D_SECURE_SMMU_SSS, + EN_IP_G2D_SECURE_SMMU_MDMA, + EN_IP_G2D_SECURE_SMMU_G2D, +}; + +PNAME(mout_aclk_g2d_333_user_p) = {"fin_pll", "dout_aclk_g2d_333"}; + +struct samsung_mux_clock g2d_mux_clks[] __initdata = { + MUX(G2D_MOUT_ACLK_G2D_333_USER, "mout_aclk_g2d_333_user", + mout_aclk_g2d_333_user_p, + MUX_SEL_G2D, 0, 1), +}; + +struct samsung_div_clock g2d_div_clks[] __initdata = { + DIV(G2D_DOUT_PCLK_G2D_83, "dout_pclk_g2d_83", "mout_aclk_g2d_333_user", + DIV_G2D, 0, 3), +}; + +struct samsung_gate_clock g2d_gate_clks[] __initdata = { + GATE(G2D_CLK_G2D, "clk_g2d", "mout_aclk_g2d_333_user", + EN_IP_G2D, 4, 0, 0), + GATE(G2D_CLK_JPEG, "clk_jpeg", "mout_aclk_g2d_333_user", + EN_IP_G2D, 5, 0, 0), + GATE(G2D_CLK_MDMA, "clk_mdma", "mout_aclk_g2d_333_user", + EN_IP_G2D, 6, 0, 0), + GATE(G2D_CLK_SMMU3_JPEG, "clk_smmu3_jpeg", "mout_aclk_g2d_333_user", + EN_IP_G2D, 16, 0, 0), + + GATE(G2D_CLK_SSS, "clk_sss", "mout_aclk_g2d_333_user", + EN_IP_G2D_SECURE_SSS, 17, 0, 0), + + GATE(G2D_CLK_SLIM_SSS, "clk_slim_sss", "mout_aclk_g2d_333_user", + EN_IP_G2D_SECURE_SLIM_SSS, 11, 0, 0), + + GATE(G2D_CLK_SMMU_SLIM_SSS, "clk_smmu_slim_sss", + "mout_aclk_g2d_333_user", + EN_IP_G2D_SECURE_SMMU_SLIM_SSS, 13, 0, 0), + + GATE(G2D_CLK_SMMU_SSS, "clk_smmu_sss", "mout_aclk_g2d_333_user", + EN_IP_G2D_SECURE_SMMU_SSS, 14, 0, 0), + + GATE(G2D_CLK_SMMU_MDMA, "clk_smmu_mdma", "mout_aclk_g2d_333_user", + EN_IP_G2D_SECURE_SMMU_MDMA, 12, 0, 0), + + GATE(G2D_CLK_SMMU3_G2D, "clk_smmu3_g2d", "mout_aclk_g2d_333_user", + EN_IP_G2D_SECURE_SMMU_G2D, 15, 0, 0), +}; + +static void __init exynos5260_clk_g2d_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu = {0}; + + cmu.mux_clks = g2d_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(g2d_mux_clks); + cmu.div_clks = g2d_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(g2d_div_clks); + cmu.gate_clks = g2d_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(g2d_gate_clks); + cmu.nr_clk_ids = G2D_NR_CLK; + cmu.clk_regs = g2d_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(g2d_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_g2d, "samsung,exynos5260-clock-g2d", + exynos5260_clk_g2d_init); + + +/* CMU_G3D */ + +static unsigned long g3d_clk_regs[] __initdata = { + G3D_PLL_LOCK, + G3D_PLL_CON0, + G3D_PLL_CON1, + G3D_PLL_FDET, + MUX_SEL_G3D, + DIV_G3D, + DIV_G3D_PLL_FDET, + EN_ACLK_G3D, + EN_PCLK_G3D, + EN_SCLK_G3D, + EN_IP_G3D, +}; + +PNAME(mout_g3d_pll_p) = {"fin_pll", "fout_g3d_pll"}; + +struct samsung_mux_clock g3d_mux_clks[] __initdata = { + MUX(G3D_MOUT_G3D_PLL, "mout_g3d_pll", mout_g3d_pll_p, + MUX_SEL_G3D, 0, 1), +}; + +struct samsung_div_clock g3d_div_clks[] __initdata = { + DIV(G3D_DOUT_PCLK_G3D, "dout_pclk_g3d", "dout_aclk_g3d", DIV_G3D, 0, 3), + DIV(G3D_DOUT_ACLK_G3D, "dout_aclk_g3d", "mout_g3d_pll", DIV_G3D, 4, 3), +}; + +struct samsung_gate_clock g3d_gate_clks[] __initdata = { + GATE(G3D_CLK_G3D, "clk_g3d", "dout_aclk_g3d", EN_IP_G3D, 2, 0, 0), + GATE(G3D_CLK_G3D_HPM, "clk_g3d_hpm", "dout_aclk_g3d", + EN_IP_G3D, 3, 0, 0), +}; + +static struct samsung_pll_clock g3d_pll_clks[] __initdata = { + PLL(pll_2550, G3D_FOUT_G3D_PLL, "fout_g3d_pll", "fin_pll", + G3D_PLL_LOCK, G3D_PLL_CON0, + pll2550_24mhz_tbl), +}; + +static void __init exynos5260_clk_g3d_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu = {0}; + + cmu.pll_clks = g3d_pll_clks; + cmu.nr_pll_clks = ARRAY_SIZE(g3d_pll_clks); + cmu.mux_clks = g3d_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(g3d_mux_clks); + cmu.div_clks = g3d_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(g3d_div_clks); + cmu.gate_clks = g3d_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(g3d_gate_clks); + cmu.nr_clk_ids = G3D_NR_CLK; + cmu.clk_regs = g3d_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(g3d_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_g3d, "samsung,exynos5260-clock-g3d", + exynos5260_clk_g3d_init); + + +/* CMU_GSCL */ + +static unsigned long gscl_clk_regs[] __initdata = { + MUX_SEL_GSCL, + DIV_GSCL, + EN_ACLK_GSCL, + EN_ACLK_GSCL_FIMC, + EN_ACLK_GSCL_SECURE_SMMU_GSCL0, + EN_ACLK_GSCL_SECURE_SMMU_GSCL1, + EN_ACLK_GSCL_SECURE_SMMU_MSCL0, + EN_ACLK_GSCL_SECURE_SMMU_MSCL1, + EN_PCLK_GSCL, + EN_PCLK_GSCL_FIMC, + EN_PCLK_GSCL_SECURE_SMMU_GSCL0, + EN_PCLK_GSCL_SECURE_SMMU_GSCL1, + EN_PCLK_GSCL_SECURE_SMMU_MSCL0, + EN_PCLK_GSCL_SECURE_SMMU_MSCL1, + EN_SCLK_GSCL, + EN_SCLK_GSCL_FIMC, + EN_IP_GSCL, + EN_IP_GSCL_FIMC, + EN_IP_GSCL_SECURE_SMMU_GSCL0, + EN_IP_GSCL_SECURE_SMMU_GSCL1, + EN_IP_GSCL_SECURE_SMMU_MSCL0, + EN_IP_GSCL_SECURE_SMMU_MSCL1, +}; + +PNAME(mout_aclk_gscl_333_user_p) = {"fin_pll", "dout_aclk_gscl_333"}; +PNAME(mout_aclk_m2m_400_user_p) = {"fin_pll", "dout_aclk_gscl_400"}; +PNAME(mout_aclk_gscl_fimc_user_p) = {"fin_pll", "dout_aclk_gscl_400"}; +PNAME(mout_aclk_csis_p) = {"dout_aclk_csis_200", "mout_aclk_gscl_fimc_user"}; + +struct samsung_mux_clock gscl_mux_clks[] __initdata = { + MUX(GSCL_MOUT_ACLK_GSCL_333_USER, "mout_aclk_gscl_333_user", + mout_aclk_gscl_333_user_p, + MUX_SEL_GSCL, 0, 1), + MUX(GSCL_MOUT_ACLK_M2M_400_USER, "mout_aclk_m2m_400_user", + mout_aclk_m2m_400_user_p, + MUX_SEL_GSCL, 4, 1), + MUX(GSCL_MOUT_ACLK_GSCL_FIMC_USER, "mout_aclk_gscl_fimc_user", + mout_aclk_gscl_fimc_user_p, + MUX_SEL_GSCL, 8, 1), + MUX(GSCL_MOUT_ACLK_CSIS, "mout_aclk_csis", mout_aclk_csis_p, + MUX_SEL_GSCL, 24, 1), +}; + +struct samsung_div_clock gscl_div_clks[] __initdata = { + DIV(GSCL_DOUT_PCLK_M2M_100, "dout_pclk_m2m_100", + "mout_aclk_m2m_400_user", + DIV_GSCL, 0, 3), + DIV(GSCL_DOUT_ACLK_CSIS_200, "dout_aclk_csis_200", + "mout_aclk_m2m_400_user", + DIV_GSCL, 4, 3), +}; + +struct samsung_gate_clock gscl_gate_clks[] __initdata = { + GATE(GSCL_SCLK_CSIS0_WRAP, "sclk_csis0_wrap", "dout_aclk_csis_200", + EN_SCLK_GSCL_FIMC, 0, CLK_SET_RATE_PARENT, 0), + GATE(GSCL_SCLK_CSIS1_WRAP, "sclk_csis1_wrap", "dout_aclk_csis_200", + EN_SCLK_GSCL_FIMC, 1, CLK_SET_RATE_PARENT, 0), + + GATE(GSCL_CLK_GSCL0, "clk_gscl0", "mout_aclk_gscl_333_user", + EN_IP_GSCL, 2, 0, 0), + GATE(GSCL_CLK_GSCL1, "clk_gscl1", "mout_aclk_gscl_333_user", + EN_IP_GSCL, 3, 0, 0), + GATE(GSCL_CLK_MSCL0, "clk_mscl0", "mout_aclk_gscl_333_user", + EN_IP_GSCL, 4, 0, 0), + GATE(GSCL_CLK_MSCL1, "clk_mscl1", "mout_aclk_gscl_333_user", + EN_IP_GSCL, 5, 0, 0), + GATE(GSCL_CLK_PIXEL_GSCL0, "clk_pixel_gscl0", + "mout_aclk_gscl_333_user", + EN_IP_GSCL, 8, 0, 0), + GATE(GSCL_CLK_PIXEL_GSCL1, "clk_pixel_gscl1", + "mout_aclk_gscl_333_user", + EN_IP_GSCL, 9, 0, 0), + + GATE(GSCL_CLK_SMMU3_LITE_A, "clk_smmu3_lite_a", + "mout_aclk_gscl_fimc_user", + EN_IP_GSCL_FIMC, 5, 0, 0), + GATE(GSCL_CLK_SMMU3_LITE_B, "clk_smmu3_lite_b", + "mout_aclk_gscl_fimc_user", + EN_IP_GSCL_FIMC, 6, 0, 0), + GATE(GSCL_CLK_SMMU3_LITE_D, "clk_smmu3_lite_d", + "mout_aclk_gscl_fimc_user", + EN_IP_GSCL_FIMC, 7, 0, 0), + GATE(GSCL_CLK_CSIS0, "clk_csis0", "mout_aclk_gscl_fimc_user", + EN_IP_GSCL_FIMC, 8, 0, 0), + GATE(GSCL_CLK_CSIS1, "clk_csis1", "mout_aclk_gscl_fimc_user", + EN_IP_GSCL_FIMC, 9, 0, 0), + GATE(GSCL_CLK_FIMC_LITE_A, "clk_fimc_lite_a", + "mout_aclk_gscl_fimc_user", + EN_IP_GSCL_FIMC, 10, 0, 0), + GATE(GSCL_CLK_FIMC_LITE_B, "clk_fimc_lite_b", + "mout_aclk_gscl_fimc_user", + EN_IP_GSCL_FIMC, 11, 0, 0), + GATE(GSCL_CLK_FIMC_LITE_D, "clk_fimc_lite_d", + "mout_aclk_gscl_fimc_user", + EN_IP_GSCL_FIMC, 12, 0, 0), + + GATE(GSCL_CLK_SMMU3_GSCL0, "clk_smmu3_gscl0", + "mout_aclk_gscl_333_user", + EN_IP_GSCL_SECURE_SMMU_GSCL0, 17, 0, 0), + GATE(GSCL_CLK_SMMU3_GSCL1, "clk_smmu3_gscl1", "mout_aclk_gscl_333_user", + EN_IP_GSCL_SECURE_SMMU_GSCL1, 18, 0, 0), + GATE(GSCL_CLK_SMMU3_MSCL0, "clk_smmu3_mscl0", + "mout_aclk_m2m_400_user", + EN_IP_GSCL_SECURE_SMMU_MSCL0, 19, 0, 0), + GATE(GSCL_CLK_SMMU3_MSCL1, "clk_smmu3_mscl1", + "mout_aclk_m2m_400_user", + EN_IP_GSCL_SECURE_SMMU_MSCL1, 20, 0, 0), +}; + +static void __init exynos5260_clk_gscl_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu = {0}; + + cmu.mux_clks = gscl_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(gscl_mux_clks); + cmu.div_clks = gscl_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(gscl_div_clks); + cmu.gate_clks = gscl_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(gscl_gate_clks); + cmu.nr_clk_ids = GSCL_NR_CLK; + cmu.clk_regs = gscl_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(gscl_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_gscl, "samsung,exynos5260-clock-gscl", + exynos5260_clk_gscl_init); + + +/* CMU_ISP */ + +static unsigned long isp_clk_regs[] __initdata = { + MUX_SEL_ISP0, + MUX_SEL_ISP1, + DIV_ISP, + EN_ACLK_ISP0, + EN_ACLK_ISP1, + EN_PCLK_ISP0, + EN_PCLK_ISP1, + EN_SCLK_ISP, + EN_IP_ISP0, + EN_IP_ISP1, +}; + +PNAME(mout_isp_400_user_p) = {"fin_pll", "dout_aclk_isp1_400"}; +PNAME(mout_isp_266_user_p) = {"fin_pll", "dout_aclk_isp1_266"}; + +struct samsung_mux_clock isp_mux_clks[] __initdata = { + MUX(ISP_MOUT_ISP_266_USER, "mout_isp_266_user", mout_isp_266_user_p, + MUX_SEL_ISP0, 0, 1), + MUX(ISP_MOUT_ISP_400_USER, "mout_isp_400_user", mout_isp_400_user_p, + MUX_SEL_ISP0, 4, 1), +}; + +struct samsung_div_clock isp_div_clks[] __initdata = { + DIV(ISP_DOUT_PCLK_ISP_66, "dout_pclk_isp_66", "mout_kfc", + DIV_ISP, 0, 3), + DIV(ISP_DOUT_PCLK_ISP_133, "dout_pclk_isp_133", "mout_kfc", + DIV_ISP, 4, 4), + DIV(ISP_DOUT_CA5_ATCLKIN, "dout_ca5_atclkin", "mout_kfc", + DIV_ISP, 12, 3), + DIV(ISP_DOUT_CA5_PCLKDBG, "dout_ca5_pclkdbg", "mout_kfc", + DIV_ISP, 16, 4), + DIV(ISP_DOUT_SCLK_MPWM, "dout_sclk_mpwm", "mout_kfc", DIV_ISP, 20, 2), +}; + +struct samsung_gate_clock isp_gate_clks[] __initdata = { + GATE(ISP_CLK_GIC, "clk_isp_gic", "mout_aclk_isp1_266", + EN_IP_ISP0, 15, 0, 0), + + GATE(ISP_CLK_CA5, "clk_isp_ca5", "mout_aclk_isp1_266", + EN_IP_ISP1, 1, 0, 0), + GATE(ISP_CLK_FIMC_DRC, "clk_isp_fimc_drc", "mout_aclk_isp1_266", + EN_IP_ISP1, 2, 0, 0), + GATE(ISP_CLK_FIMC_FD, "clk_isp_fimc_fd", "mout_aclk_isp1_266", + EN_IP_ISP1, 3, 0, 0), + GATE(ISP_CLK_FIMC, "clk_isp_fimc", "mout_aclk_isp1_266", + EN_IP_ISP1, 4, 0, 0), + GATE(ISP_CLK_FIMC_SCALERC, "clk_isp_fimc_scalerc", + "mout_aclk_isp1_266", + EN_IP_ISP1, 5, 0, 0), + GATE(ISP_CLK_FIMC_SCALERP, "clk_isp_fimc_scalerp", + "mout_aclk_isp1_266", + EN_IP_ISP1, 6, 0, 0), + GATE(ISP_CLK_I2C0, "clk_isp_i2c0", "mout_aclk_isp1_266", + EN_IP_ISP1, 7, 0, 0), + GATE(ISP_CLK_I2C1, "clk_isp_i2c1", "mout_aclk_isp1_266", + EN_IP_ISP1, 8, 0, 0), + GATE(ISP_CLK_MCUCTL, "clk_isp_mcuctl", "mout_aclk_isp1_266", + EN_IP_ISP1, 9, 0, 0), + GATE(ISP_CLK_MPWM, "clk_isp_mpwm", "mout_aclk_isp1_266", + EN_IP_ISP1, 10, 0, 0), + GATE(ISP_CLK_MTCADC, "clk_isp_mtcadc", "mout_aclk_isp1_266", + EN_IP_ISP1, 11, 0, 0), + GATE(ISP_CLK_PWM, "clk_isp_pwm", "mout_aclk_isp1_266", + EN_IP_ISP1, 14, 0, 0), + GATE(ISP_CLK_SMMU_DRC, "clk_smmu_drc", "mout_aclk_isp1_266", + EN_IP_ISP1, 21, 0, 0), + GATE(ISP_CLK_SMMU_FD, "clk_smmu_fd", "mout_aclk_isp1_266", + EN_IP_ISP1, 22, 0, 0), + GATE(ISP_CLK_SMMU_ISP, "clk_smmu_isp", "mout_aclk_isp1_266", + EN_IP_ISP1, 23, 0, 0), + GATE(ISP_CLK_SMMU_ISPCX, "clk_smmu_ispcx", "mout_aclk_isp1_266", + EN_IP_ISP1, 24, 0, 0), + GATE(ISP_CLK_SMMU_SCALERC, "clk_isp_smmu_scalerc", + "mout_aclk_isp1_266", + EN_IP_ISP1, 25, 0, 0), + GATE(ISP_CLK_SMMU_SCALERP, "clk_isp_smmu_scalerp", + "mout_aclk_isp1_266", + EN_IP_ISP1, 26, 0, 0), + GATE(ISP_CLK_SPI0, "clk_isp_spi0", "mout_aclk_isp1_266", + EN_IP_ISP1, 27, 0, 0), + GATE(ISP_CLK_SPI1, "clk_isp_spi1", "mout_aclk_isp1_266", + EN_IP_ISP1, 28, 0, 0), + GATE(ISP_CLK_WDT, "clk_isp_wdt", "mout_aclk_isp1_266", + EN_IP_ISP1, 31, 0, 0), + GATE(ISP_CLK_UART, "clk_isp_uart", "mout_aclk_isp1_266", + EN_IP_ISP1, 30, 0, 0), + + GATE(ISP_SCLK_UART_EXT, "sclk_isp_uart_ext", "fin_pll", + EN_SCLK_ISP, 7, CLK_SET_RATE_PARENT, 0), + GATE(ISP_SCLK_SPI1_EXT, "sclk_isp_spi1_ext", "fin_pll", + EN_SCLK_ISP, 8, CLK_SET_RATE_PARENT, 0), + GATE(ISP_SCLK_SPI0_EXT, "sclk_isp_spi0_ext", "fin_pll", + EN_SCLK_ISP, 9, CLK_SET_RATE_PARENT, 0), +}; + +static void __init exynos5260_clk_isp_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu = {0}; + + cmu.mux_clks = isp_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(isp_mux_clks); + cmu.div_clks = isp_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(isp_div_clks); + cmu.gate_clks = isp_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(isp_gate_clks); + cmu.nr_clk_ids = ISP_NR_CLK; + cmu.clk_regs = isp_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(isp_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_isp, "samsung,exynos5260-clock-isp", + exynos5260_clk_isp_init); + + +/* CMU_KFC */ + +static unsigned long kfc_clk_regs[] __initdata = { + KFC_PLL_LOCK, + KFC_PLL_CON0, + KFC_PLL_CON1, + KFC_PLL_FDET, + MUX_SEL_KFC0, + MUX_SEL_KFC2, + DIV_KFC, + DIV_KFC_PLL_FDET, + EN_ACLK_KFC, + EN_PCLK_KFC, + EN_SCLK_KFC, + EN_IP_KFC, +}; + +PNAME(mout_kfc_pll_p) = {"fin_pll", "fout_kfc_pll"}; +PNAME(mout_kfc_p) = {"mout_kfc_pll", "dout_media_pll"}; + +struct samsung_mux_clock kfc_mux_clks[] __initdata = { + MUX(KFC_MOUT_KFC_PLL, "mout_kfc_pll", mout_kfc_pll_p, + MUX_SEL_KFC0, 0, 1), + MUX(KFC_MOUT_KFC, "mout_kfc", mout_kfc_p, MUX_SEL_KFC2, 0, 1), +}; + +struct samsung_div_clock kfc_div_clks[] __initdata = { + DIV(KFC_DOUT_KFC1, "dout_kfc1", "mout_kfc", DIV_KFC, 0, 3), + DIV(KFC_DOUT_KFC2, "dout_kfc2", "dout_kfc1", DIV_KFC, 4, 3), + DIV(KFC_DOUT_KFC_ATCLK, "dout_kfc_atclk", "dout_kfc2", DIV_KFC, 8, 3), + DIV(KFC_DOUT_KFC_PCLK_DBG, "dout_kfc_pclk_dbg", "dout_kfc2", + DIV_KFC, 12, 3), + DIV(KFC_DOUT_ACLK_KFC, "dout_aclk_kfc", "dout_kfc2", DIV_KFC, 16, 3), + DIV(KFC_DOUT_PCLK_KFC, "dout_pclk_kfc", "dout_kfc2", DIV_KFC, 20, 3), + DIV(KFC_DOUT_KFC_PLL, "dout_kfc_pll", "mout_kfc", DIV_KFC, 24, 3), +}; + +static struct samsung_pll_clock kfc_pll_clks[] __initdata = { + PLL(pll_2550xx, KFC_FOUT_KFC_PLL, "fout_kfc_pll", "fin_pll", + KFC_PLL_LOCK, KFC_PLL_CON0, + pll2550_24mhz_tbl), +}; + +static void __init exynos5260_clk_kfc_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu = {0}; + + cmu.pll_clks = kfc_pll_clks; + cmu.nr_pll_clks = ARRAY_SIZE(kfc_pll_clks); + cmu.mux_clks = kfc_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(kfc_mux_clks); + cmu.div_clks = kfc_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(kfc_div_clks); + cmu.nr_clk_ids = KFC_NR_CLK; + cmu.clk_regs = kfc_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(kfc_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_kfc, "samsung,exynos5260-clock-kfc", + exynos5260_clk_kfc_init); + + +/* CMU_MFC */ + +static unsigned long mfc_clk_regs[] __initdata = { + MUX_SEL_MFC, + DIV_MFC, + EN_ACLK_MFC, + EN_ACLK_SECURE_SMMU2_MFC, + EN_PCLK_MFC, + EN_PCLK_SECURE_SMMU2_MFC, + EN_IP_MFC, + EN_IP_MFC_SECURE_SMMU2_MFC, +}; + +PNAME(mout_aclk_mfc_333_user_p) = {"fin_pll", "dout_aclk_mfc_333"}; + +struct samsung_mux_clock mfc_mux_clks[] __initdata = { + MUX(MFC_MOUT_ACLK_MFC_333_USER, "mout_aclk_mfc_333_user", + mout_aclk_mfc_333_user_p, + MUX_SEL_MFC, 0, 1), +}; + +struct samsung_div_clock mfc_div_clks[] __initdata = { + DIV(MFC_DOUT_PCLK_MFC_83, "dout_pclk_mfc_83", "mout_aclk_mfc_333_user", + DIV_MFC, 0, 3), +}; + +struct samsung_gate_clock mfc_gate_clks[] __initdata = { + GATE(MFC_CLK_MFC, "clk_mfc", "mout_aclk_mfc_333_user", + EN_IP_MFC, 1, 0, 0), + GATE(MFC_CLK_SMMU2_MFCM0, "clk_smmu2_mfcm0", "mout_aclk_mfc_333_user", + EN_IP_MFC_SECURE_SMMU2_MFC, 6, 0, 0), + GATE(MFC_CLK_SMMU2_MFCM1, "clk_smmu2_mfcm1", "mout_aclk_mfc_333_user", + EN_IP_MFC_SECURE_SMMU2_MFC, 7, 0, 0), +}; + +static void __init exynos5260_clk_mfc_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu = {0}; + + cmu.mux_clks = mfc_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(mfc_mux_clks); + cmu.div_clks = mfc_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(mfc_div_clks); + cmu.gate_clks = mfc_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(mfc_gate_clks); + cmu.nr_clk_ids = MFC_NR_CLK; + cmu.clk_regs = mfc_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(mfc_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_mfc, "samsung,exynos5260-clock-mfc", + exynos5260_clk_mfc_init); + + +/* CMU_MIF */ + +static unsigned long mif_clk_regs[] __initdata = { + MEM_PLL_LOCK, + BUS_PLL_LOCK, + MEDIA_PLL_LOCK, + MEM_PLL_CON0, + MEM_PLL_CON1, + MEM_PLL_FDET, + BUS_PLL_CON0, + BUS_PLL_CON1, + BUS_PLL_FDET, + MEDIA_PLL_CON0, + MEDIA_PLL_CON1, + MEDIA_PLL_FDET, + MUX_SEL_MIF, + DIV_MIF, + DIV_MIF_PLL_FDET, + EN_ACLK_MIF, + EN_ACLK_MIF_SECURE_DREX1_TZ, + EN_ACLK_MIF_SECURE_DREX0_TZ, + EN_ACLK_MIF_SECURE_INTMEM, + EN_PCLK_MIF, + EN_PCLK_MIF_SECURE_MONOCNT, + EN_PCLK_MIF_SECURE_RTC_APBIF, + EN_PCLK_MIF_SECURE_DREX1_TZ, + EN_PCLK_MIF_SECURE_DREX0_TZ, + EN_SCLK_MIF, + EN_IP_MIF, + EN_IP_MIF_SECURE_MONOCNT, + EN_IP_MIF_SECURE_RTC_APBIF, + EN_IP_MIF_SECURE_DREX1_TZ, + EN_IP_MIF_SECURE_DREX0_TZ, + EN_IP_MIF_SECURE_INTEMEM, +}; + +PNAME(mout_mem_pll_p) = {"fin_pll", "fout_mem_pll"}; +PNAME(mout_bus_pll_p) = {"fin_pll", "fout_bus_pll"}; +PNAME(mout_media_pll_p) = {"fin_pll", "fout_media_pll"}; +PNAME(mout_mif_drex_p) = {"dout_mem_pll", "dout_bus_pll"}; +PNAME(mout_mif_drex2x_p) = {"dout_mem_pll", "dout_bus_pll"}; +PNAME(mout_clkm_phy_p) = {"mout_mif_drex", "dout_media_pll"}; +PNAME(mout_clk2x_phy_p) = {"mout_mif_drex2x", "dout_media_pll"}; + +struct samsung_mux_clock mif_mux_clks[] __initdata = { + MUX(MIF_MOUT_MEM_PLL, "mout_mem_pll", mout_mem_pll_p, + MUX_SEL_MIF, 0, 1), + MUX(MIF_MOUT_BUS_PLL, "mout_bus_pll", mout_bus_pll_p, + MUX_SEL_MIF, 4, 1), + MUX(MIF_MOUT_MEDIA_PLL, "mout_media_pll", mout_media_pll_p, + MUX_SEL_MIF, 8, 1), + MUX(MIF_MOUT_MIF_DREX, "mout_mif_drex", mout_mif_drex_p, + MUX_SEL_MIF, 12, 1), + MUX(MIF_MOUT_CLKM_PHY, "mout_clkm_phy", mout_clkm_phy_p, + MUX_SEL_MIF, 16, 1), + MUX(MIF_MOUT_MIF_DREX2X, "mout_mif_drex2x", mout_mif_drex2x_p, + MUX_SEL_MIF, 20, 1), + MUX(MIF_MOUT_CLK2X_PHY, "mout_clk2x_phy", mout_clk2x_phy_p, + MUX_SEL_MIF, 24, 1), +}; + +struct samsung_div_clock mif_div_clks[] __initdata = { + DIV(MIF_DOUT_MEDIA_PLL, "dout_media_pll", "mout_media_pll", + DIV_MIF, 0, 3), + DIV(MIF_DOUT_MEM_PLL, "dout_mem_pll", "mout_mem_pll", + DIV_MIF, 4, 3), + DIV(MIF_DOUT_BUS_PLL, "dout_bus_pll", "mout_bus_pll", + DIV_MIF, 8, 3), + DIV(MIF_DOUT_CLKM_PHY, "dout_clkm_phy", "mout_clkm_phy", + DIV_MIF, 12, 3), + DIV(MIF_DOUT_CLK2X_PHY, "dout_clk2x_phy", "mout_clk2x_phy", + DIV_MIF, 16, 4), + DIV(MIF_DOUT_ACLK_MIF_466, "dout_aclk_mif_466", "dout_clk2x_phy", + DIV_MIF, 20, 3), + DIV(MIF_DOUT_ACLK_BUS_200, "dout_aclk_bus_200", "dout_bus_pll", + DIV_MIF, 24, 3), + DIV(MIF_DOUT_ACLK_BUS_100, "dout_aclk_bus_100", "dout_bus_pll", + DIV_MIF, 28, 4), +}; + +struct samsung_gate_clock mif_gate_clks[] __initdata = { + GATE(MIF_CLK_LPDDR3PHY_WRAP0, "clk_lpddr3phy_wrap0", "dout_clk2x_phy", + EN_IP_MIF, 12, CLK_IGNORE_UNUSED, 0), + GATE(MIF_CLK_LPDDR3PHY_WRAP1, "clk_lpddr3phy_wrap1", "dout_clk2x_phy", + EN_IP_MIF, 13, CLK_IGNORE_UNUSED, 0), + + GATE(MIF_CLK_MONOCNT, "clk_monocnt", "dout_aclk_bus_100", + EN_IP_MIF_SECURE_MONOCNT, 22, + CLK_IGNORE_UNUSED, 0), + + GATE(MIF_CLK_MIF_RTC, "clk_mif_rtc", "dout_aclk_bus_100", + EN_IP_MIF_SECURE_RTC_APBIF, 23, + CLK_IGNORE_UNUSED, 0), + + GATE(MIF_CLK_DREX1, "clk_drex1", "dout_aclk_mif_466", + EN_IP_MIF_SECURE_DREX1_TZ, 9, + CLK_IGNORE_UNUSED, 0), + + GATE(MIF_CLK_DREX0, "clk_drex0", "dout_aclk_mif_466", + EN_IP_MIF_SECURE_DREX0_TZ, 9, + CLK_IGNORE_UNUSED, 0), + + GATE(MIF_CLK_INTMEM, "clk_intmem", "dout_aclk_bus_200", + EN_IP_MIF_SECURE_INTEMEM, 11, + CLK_IGNORE_UNUSED, 0), + + GATE(MIF_SCLK_LPDDR3PHY_WRAP_U0, "sclk_lpddr3phy_wrap_u0", + "dout_clkm_phy", EN_SCLK_MIF, 0, + CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0), + GATE(MIF_SCLK_LPDDR3PHY_WRAP_U1, "sclk_lpddr3phy_wrap_u1", + "dout_clkm_phy", EN_SCLK_MIF, 1, + CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0), +}; + +static struct samsung_pll_clock mif_pll_clks[] __initdata = { + PLL(pll_2550xx, MIF_FOUT_MEM_PLL, "fout_mem_pll", "fin_pll", + MEM_PLL_LOCK, MEM_PLL_CON0, + pll2550_24mhz_tbl), + PLL(pll_2550xx, MIF_FOUT_BUS_PLL, "fout_bus_pll", "fin_pll", + BUS_PLL_LOCK, BUS_PLL_CON0, + pll2550_24mhz_tbl), + PLL(pll_2550xx, MIF_FOUT_MEDIA_PLL, "fout_media_pll", "fin_pll", + MEDIA_PLL_LOCK, MEDIA_PLL_CON0, + pll2550_24mhz_tbl), +}; + +static void __init exynos5260_clk_mif_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu = {0}; + + cmu.pll_clks = mif_pll_clks; + cmu.nr_pll_clks = ARRAY_SIZE(mif_pll_clks); + cmu.mux_clks = mif_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(mif_mux_clks); + cmu.div_clks = mif_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(mif_div_clks); + cmu.gate_clks = mif_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(mif_gate_clks); + cmu.nr_clk_ids = MIF_NR_CLK; + cmu.clk_regs = mif_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(mif_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_mif, "samsung,exynos5260-clock-mif", + exynos5260_clk_mif_init); + + +/* CMU_PERI */ + +static unsigned long peri_clk_regs[] __initdata = { + MUX_SEL_PERI, + MUX_SEL_PERI1, + DIV_PERI, + EN_PCLK_PERI0, + EN_PCLK_PERI1, + EN_PCLK_PERI2, + EN_PCLK_PERI3, + EN_PCLK_PERI_SECURE_CHIPID, + EN_PCLK_PERI_SECURE_PROVKEY0, + EN_PCLK_PERI_SECURE_PROVKEY1, + EN_PCLK_PERI_SECURE_SECKEY, + EN_PCLK_PERI_SECURE_ANTIRBKCNT, + EN_PCLK_PERI_SECURE_TOP_RTC, + EN_PCLK_PERI_SECURE_TZPC, + EN_SCLK_PERI, + EN_SCLK_PERI_SECURE_TOP_RTC, + EN_IP_PERI0, + EN_IP_PERI1, + EN_IP_PERI2, + EN_IP_PERI_SECURE_CHIPID, + EN_IP_PERI_SECURE_PROVKEY0, + EN_IP_PERI_SECURE_PROVKEY1, + EN_IP_PERI_SECURE_SECKEY, + EN_IP_PERI_SECURE_ANTIRBKCNT, + EN_IP_PERI_SECURE_TOP_RTC, + EN_IP_PERI_SECURE_TZPC, +}; + +PNAME(mout_sclk_pcm_p) = {"ioclk_pcm_extclk", "fin_pll", "dout_aclk_peri_aud", + "phyclk_hdmi_phy_ref_cko"}; +PNAME(mout_sclk_i2scod_p) = {"ioclk_i2s_cdclk", "fin_pll", "dout_aclk_peri_aud", + "phyclk_hdmi_phy_ref_cko"}; +PNAME(mout_sclk_spdif_p) = {"ioclk_spdif_extclk", "fin_pll", + "dout_aclk_peri_aud", "phyclk_hdmi_phy_ref_cko"}; + +struct samsung_mux_clock peri_mux_clks[] __initdata = { + MUX(PERI_MOUT_SCLK_PCM, "mout_sclk_pcm", mout_sclk_pcm_p, + MUX_SEL_PERI1, 4, 2), + MUX(PERI_MOUT_SCLK_I2SCOD, "mout_sclk_i2scod", mout_sclk_i2scod_p, + MUX_SEL_PERI1, 12, 2), + MUX(PERI_MOUT_SCLK_SPDIF, "mout_sclk_spdif", mout_sclk_spdif_p, + MUX_SEL_PERI1, 20, 2), +}; + +struct samsung_div_clock peri_div_clks[] __initdata = { + DIV(PERI_DOUT_PCM, "dout_pcm", "mout_sclk_pcm", DIV_PERI, 0, 8), + DIV(PERI_DOUT_I2S, "dout_i2s", "mout_sclk_i2scod", DIV_PERI, 8, 6), +}; + +struct samsung_gate_clock peri_gate_clks[] __initdata = { + GATE(PERI_SCLK_PCM1, "sclk_pcm1", "dout_pcm", EN_SCLK_PERI, 0, + CLK_SET_RATE_PARENT, 0), + GATE(PERI_SCLK_I2S, "sclk_i2s", "dout_i2s", EN_SCLK_PERI, 1, + CLK_SET_RATE_PARENT, 0), + GATE(PERI_SCLK_SPDIF, "sclk_spdif", "dout_sclk_peri_spi0_b", + EN_SCLK_PERI, 2, CLK_SET_RATE_PARENT, 0), + GATE(PERI_SCLK_SPI0, "sclk_spi0", "dout_sclk_peri_spi0_b", + EN_SCLK_PERI, 7, CLK_SET_RATE_PARENT, 0), + GATE(PERI_SCLK_SPI1, "sclk_spi1", "dout_sclk_peri_spi1_b", + EN_SCLK_PERI, 8, CLK_SET_RATE_PARENT, 0), + GATE(PERI_SCLK_SPI2, "sclk_spi2", "dout_sclk_peri_spi2_b", + EN_SCLK_PERI, 9, CLK_SET_RATE_PARENT, 0), + GATE(PERI_SCLK_UART0, "sclk_uart0", "dout_sclk_peri_uart0", + EN_SCLK_PERI, 10, CLK_SET_RATE_PARENT, 0), + GATE(PERI_SCLK_UART1, "sclk_uart1", "dout_sclk_peri_uart1", + EN_SCLK_PERI, 11, CLK_SET_RATE_PARENT, 0), + GATE(PERI_SCLK_UART2, "sclk_uart2", "dout_sclk_peri_uart2", + EN_SCLK_PERI, 12, CLK_SET_RATE_PARENT, 0), + + GATE(PERI_CLK_ABB, "clk_abb", "dout_aclk_peri_66", + EN_IP_PERI0, 1, 0, 0), + GATE(PERI_CLK_EFUSE_WRITER, "clk_efuse_writer", "dout_aclk_peri_66", + EN_IP_PERI0, 5, 0, 0), + GATE(PERI_CLK_HDMICEC, "clk_hdmicec", "dout_aclk_peri_66", + EN_IP_PERI0, 6, 0, 0), + GATE(PERI_CLK_I2C10, "clk_i2c10", "dout_aclk_peri_66", + EN_IP_PERI0, 7, 0, 0), + GATE(PERI_CLK_I2C11, "clk_i2c11", "dout_aclk_peri_66", + EN_IP_PERI0, 8, 0, 0), + GATE(PERI_CLK_I2C8, "clk_i2c8", "dout_aclk_peri_66", + EN_IP_PERI0, 9, 0, 0), + GATE(PERI_CLK_I2C9, "clk_i2c9", "dout_aclk_peri_66", + EN_IP_PERI0, 10, 0, 0), + GATE(PERI_CLK_I2C4, "clk_i2c4", "dout_aclk_peri_66", + EN_IP_PERI0, 11, 0, 0), + GATE(PERI_CLK_I2C5, "clk_i2c5", "dout_aclk_peri_66", + EN_IP_PERI0, 12, 0, 0), + GATE(PERI_CLK_I2C6, "clk_i2c6", "dout_aclk_peri_66", + EN_IP_PERI0, 13, 0, 0), + GATE(PERI_CLK_I2C7, "clk_i2c7", "dout_aclk_peri_66", + EN_IP_PERI0, 14, 0, 0), + GATE(PERI_CLK_I2CHDMI, "clk_i2chdmi", "dout_aclk_peri_66", + EN_IP_PERI0, 15, 0, 0), + GATE(PERI_CLK_I2S, "clk_peri_i2s", "dout_aclk_peri_66", + EN_IP_PERI0, 16, 0, 0), + GATE(PERI_CLK_MCT, "clk_mct", "dout_aclk_peri_66", + EN_IP_PERI0, 17, 0, 0), + GATE(PERI_CLK_PCM, "clk_peri_pcm", "dout_aclk_peri_66", + EN_IP_PERI0, 18, 0, 0), + GATE(PERI_CLK_HSIC0, "clk_hsic0", "dout_aclk_peri_66", + EN_IP_PERI0, 20, 0, 0), + GATE(PERI_CLK_HSIC1, "clk_hsic1", "dout_aclk_peri_66", + EN_IP_PERI0, 21, 0, 0), + GATE(PERI_CLK_HSIC2, "clk_hsic2", "dout_aclk_peri_66", + EN_IP_PERI0, 22, 0, 0), + GATE(PERI_CLK_HSIC3, "clk_hsic3", "dout_aclk_peri_66", + EN_IP_PERI0, 23, 0, 0), + GATE(PERI_CLK_WDT_EGL, "clk_wdt_egl", "dout_aclk_peri_66", + EN_IP_PERI0, 24, 0, 0), + GATE(PERI_CLK_WDT_KFC, "clk_wdt_kfc", "dout_aclk_peri_66", + EN_IP_PERI0, 25, 0, 0), + + GATE(PERI_CLK_UART4, "clk_uart4", "dout_aclk_peri_66", + EN_IP_PERI2, 0, 0, 0), + GATE(PERI_CLK_PWM, "clk_pwm", "dout_aclk_peri_66", + EN_IP_PERI2, 3, 0, 0), + GATE(PERI_CLK_SPDIF, "clk_spdif", "dout_aclk_peri_66", + EN_IP_PERI2, 6, 0, 0), + GATE(PERI_CLK_SPI0, "clk_spi0", "dout_aclk_peri_66", + EN_IP_PERI2, 7, 0, 0), + GATE(PERI_CLK_SPI1, "clk_spi1", "dout_aclk_peri_66", + EN_IP_PERI2, 8, 0, 0), + GATE(PERI_CLK_SPI2, "clk_spi2", "dout_aclk_peri_66", + EN_IP_PERI2, 9, 0, 0), + GATE(PERI_CLK_TMU0, "clk_tmu0", "dout_aclk_peri_66", + EN_IP_PERI2, 10, 0, 0), + GATE(PERI_CLK_TMU1, "clk_tmu1", "dout_aclk_peri_66", + EN_IP_PERI2, 11, 0, 0), + GATE(PERI_CLK_TMU2, "clk_tmu2", "dout_aclk_peri_66", + EN_IP_PERI2, 12, 0, 0), + GATE(PERI_CLK_TMU3, "clk_tmu3", "dout_aclk_peri_66", + EN_IP_PERI2, 13, 0, 0), + GATE(PERI_CLK_TMU4, "clk_tmu4", "dout_aclk_peri_66", + EN_IP_PERI2, 14, 0, 0), + GATE(PERI_CLK_ADC, "clk_adc", "dout_aclk_peri_66", + EN_IP_PERI2, 18, 0, 0), + GATE(PERI_CLK_UART0, "clk_uart0", "dout_aclk_peri_66", + EN_IP_PERI2, 19, 0, 0), + GATE(PERI_CLK_UART1, "clk_uart1", "dout_aclk_peri_66", + EN_IP_PERI2, 20, 0, 0), + GATE(PERI_CLK_UART2, "clk_uart2", "dout_aclk_peri_66", + EN_IP_PERI2, 21, 0, 0), + + GATE(PERI_CLK_CHIPID, "clk_chipid", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_CHIPID, 2, 0, 0), + + GATE(PERI_CLK_PROVKEY0, "clk_provkey0", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_PROVKEY0, 1, 0, 0), + + GATE(PERI_CLK_PROVKEY1, "clk_provkey1", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_PROVKEY1, 2, 0, 0), + + GATE(PERI_CLK_SECKEY, "clk_seckey", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_SECKEY, 5, 0, 0), + + GATE(PERI_CLK_TOP_RTC, "clk_top_rtc", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TOP_RTC, 5, 0, 0), + + GATE(PERI_CLK_TZPC0, "clk_tzpc0", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 10, 0, 0), + GATE(PERI_CLK_TZPC1, "clk_tzpc1", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 11, 0, 0), + GATE(PERI_CLK_TZPC2, "clk_tzpc2", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 12, 0, 0), + GATE(PERI_CLK_TZPC3, "clk_tzpc3", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 13, 0, 0), + GATE(PERI_CLK_TZPC4, "clk_tzpc4", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 14, 0, 0), + GATE(PERI_CLK_TZPC5, "clk_tzpc5", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 15, 0, 0), + GATE(PERI_CLK_TZPC6, "clk_tzpc6", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 16, 0, 0), + GATE(PERI_CLK_TZPC7, "clk_tzpc7", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 17, 0, 0), + GATE(PERI_CLK_TZPC8, "clk_tzpc8", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 18, 0, 0), + GATE(PERI_CLK_TZPC9, "clk_tzpc9", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 19, 0, 0), + GATE(PERI_CLK_TZPC10, "clk_tzpc10", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 20, 0, 0), +}; + +static void __init exynos5260_clk_peri_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu = {0}; + + cmu.mux_clks = peri_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(peri_mux_clks); + cmu.div_clks = peri_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(peri_div_clks); + cmu.gate_clks = peri_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(peri_gate_clks); + cmu.nr_clk_ids = PERI_NR_CLK; + cmu.clk_regs = peri_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(peri_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_peri, "samsung,exynos5260-clock-peri", + exynos5260_clk_peri_init); + + +/* CMU_TOP */ + +static unsigned long top_clk_regs[] __initdata = { + DISP_PLL_LOCK, + AUD_PLL_LOCK, + DISP_PLL_CON0, + DISP_PLL_CON1, + DISP_PLL_FDET, + AUD_PLL_CON0, + AUD_PLL_CON1, + AUD_PLL_CON2, + AUD_PLL_FDET, + MUX_SEL_TOP_PLL0, + MUX_SEL_TOP_MFC, + MUX_SEL_TOP_G2D, + MUX_SEL_TOP_GSCL, + MUX_SEL_TOP_ISP10, + MUX_SEL_TOP_ISP11, + MUX_SEL_TOP_DISP0, + MUX_SEL_TOP_DISP1, + MUX_SEL_TOP_BUS, + MUX_SEL_TOP_PERI0, + MUX_SEL_TOP_PERI1, + MUX_SEL_TOP_FSYS, + DIV_TOP_G2D_MFC, + DIV_TOP_GSCL_ISP0, + DIV_TOP_ISP10, + DIV_TOP_ISP11, + DIV_TOP_DISP, + DIV_TOP_BUS, + DIV_TOP_PERI0, + DIV_TOP_PERI1, + DIV_TOP_PERI2, + DIV_TOP_FSYS0, + DIV_TOP_FSYS1, + DIV_TOP_HPM, + DIV_TOP_PLL_FDET, + EN_ACLK_TOP, + EN_SCLK_TOP, + EN_IP_TOP, +}; + +/* fixed rate clocks generated inside the soc */ +struct samsung_fixed_rate_clock fixed_rate_clks[] __initdata = { + FRATE(PHYCLK_DPTX_PHY_CH3_TXD_CLK, "phyclk_dptx_phy_ch3_txd_clk", NULL, + CLK_IS_ROOT, 270000000), + FRATE(PHYCLK_DPTX_PHY_CH2_TXD_CLK, "phyclk_dptx_phy_ch2_txd_clk", NULL, + CLK_IS_ROOT, 270000000), + FRATE(PHYCLK_DPTX_PHY_CH1_TXD_CLK, "phyclk_dptx_phy_ch1_txd_clk", NULL, + CLK_IS_ROOT, 270000000), + FRATE(PHYCLK_DPTX_PHY_CH0_TXD_CLK, "phyclk_dptx_phy_ch0_txd_clk", NULL, + CLK_IS_ROOT, 270000000), + FRATE(phyclk_hdmi_phy_tmds_clko, "phyclk_hdmi_phy_tmds_clko", NULL, + CLK_IS_ROOT, 250000000), + FRATE(PHYCLK_HDMI_PHY_PIXEL_CLKO, "phyclk_hdmi_phy_pixel_clko", NULL, + CLK_IS_ROOT, 1660000000), + FRATE(PHYCLK_HDMI_LINK_O_TMDS_CLKHI, "phyclk_hdmi_link_o_tmds_clkhi", + NULL, CLK_IS_ROOT, 125000000), + FRATE(PHYCLK_MIPI_DPHY_4L_M_TXBYTECLKHS, + "phyclk_mipi_dphy_4l_m_txbyteclkhs" , NULL, + CLK_IS_ROOT, 187500000), + FRATE(PHYCLK_DPTX_PHY_O_REF_CLK_24M, "phyclk_dptx_phy_o_ref_clk_24m", + NULL, CLK_IS_ROOT, 24000000), + FRATE(PHYCLK_DPTX_PHY_CLK_DIV2, "phyclk_dptx_phy_clk_div2", NULL, + CLK_IS_ROOT, 135000000), + FRATE(PHYCLK_MIPI_DPHY_4L_M_RXCLKESC0, + "phyclk_mipi_dphy_4l_m_rxclkesc0", NULL, + CLK_IS_ROOT, 20000000), + FRATE(PHYCLK_USBHOST20_PHY_PHYCLOCK, "phyclk_usbhost20_phy_phyclock", + NULL, CLK_IS_ROOT, 60000000), + FRATE(PHYCLK_USBHOST20_PHY_FREECLK, "phyclk_usbhost20_phy_freeclk", + NULL, CLK_IS_ROOT, 60000000), + FRATE(PHYCLK_USBHOST20_PHY_CLK48MOHCI, + "phyclk_usbhost20_phy_clk48mohci", + NULL, CLK_IS_ROOT, 48000000), + FRATE(PHYCLK_USBDRD30_UDRD30_PIPE_PCLK, + "phyclk_usbdrd30_udrd30_pipe_pclk", NULL, + CLK_IS_ROOT, 125000000), + FRATE(PHYCLK_USBDRD30_UDRD30_PHYCLOCK, + "phyclk_usbdrd30_udrd30_phyclock", NULL, + CLK_IS_ROOT, 60000000), +}; + +PNAME(mout_memtop_pll_user_p) = {"fin_pll", "dout_mem_pll"}; +PNAME(mout_bustop_pll_user_p) = {"fin_pll", "dout_bus_pll"}; +PNAME(mout_mediatop_pll_user_p) = {"fin_pll", "dout_media_pll"}; +PNAME(mout_audtop_pll_user_p) = {"fin_pll", "mout_aud_pll"}; +PNAME(mout_aud_pll_p) = {"fin_pll", "fout_aud_pll"}; +PNAME(mout_disp_pll_p) = {"fin_pll", "fout_disp_pll"}; +PNAME(mout_mfc_bustop_333_p) = {"mout_bustop_pll_user", "mout_disp_pll"}; +PNAME(mout_aclk_mfc_333_p) = {"mout_mediatop_pll_user", "mout_mfc_bustop_333"}; +PNAME(mout_g2d_bustop_333_p) = {"mout_bustop_pll_user", "mout_disp_pll"}; +PNAME(mout_aclk_g2d_333_p) = {"mout_mediatop_pll_user", "mout_g2d_bustop_333"}; +PNAME(mout_gscl_bustop_333_p) = {"mout_bustop_pll_user", "mout_disp_pll"}; +PNAME(mout_aclk_gscl_333_p) = {"mout_mediatop_pll_user", + "mout_gscl_bustop_333"}; +PNAME(mout_m2m_mediatop_400_p) = {"mout_mediatop_pll_user", "mout_disp_pll"}; +PNAME(mout_aclk_gscl_400_p) = {"mout_bustop_pll_user", + "mout_m2m_mediatop_400"}; +PNAME(mout_gscl_bustop_fimc_p) = {"mout_bustop_pll_user", "mout_disp_pll"}; +PNAME(mout_aclk_gscl_fimc_p) = {"mout_mediatop_pll_user", + "mout_gscl_bustop_fimc"}; +PNAME(mout_isp1_media_266_p) = {"mout_mediatop_pll_user", + "mout_memtop_pll_user"}; +PNAME(mout_aclk_isp1_266_p) = {"mout_bustop_pll_user", "mout_isp1_media_266"}; +PNAME(mout_isp1_media_400_p) = {"mout_mediatop_pll_user", "mout_disp_pll"}; +PNAME(mout_aclk_isp1_400_p) = {"mout_bustop_pll_user", "mout_isp1_media_400"}; +PNAME(mout_sclk_isp_spi_p) = {"fin_pll", "mout_bustop_pll_user"}; +PNAME(mout_sclk_isp_uart_p) = {"fin_pll", "mout_bustop_pll_user"}; +PNAME(mout_sclk_isp_sensor_p) = {"fin_pll", "mout_bustop_pll_user"}; +PNAME(mout_disp_disp_333_p) = {"mout_disp_pll", "mout_bustop_pll_user"}; +PNAME(mout_aclk_disp_333_p) = {"mout_mediatop_pll_user", "mout_disp_disp_333"}; +PNAME(mout_disp_disp_222_p) = {"mout_disp_pll", "mout_bustop_pll_user"}; +PNAME(mout_aclk_disp_222_p) = {"mout_mediatop_pll_user", "mout_disp_disp_222"}; +PNAME(mout_disp_media_pixel_p) = {"mout_mediatop_pll_user", + "mout_bustop_pll_user"}; +PNAME(mout_sclk_disp_pixel_p) = {"mout_disp_pll", "mout_disp_media_pixel"}; +PNAME(mout_bus_bustop_400_p) = {"mout_bustop_pll_user", "mout_memtop_pll_user"}; +PNAME(mout_bus_bustop_100_p) = {"mout_bustop_pll_user", "mout_memtop_pll_user"}; +PNAME(mout_sclk_peri_spi_clk_p) = {"fin_pll", "mout_bustop_pll_user"}; +PNAME(mout_sclk_peri_uart_uclk_p) = {"fin_pll", "mout_bustop_pll_user"}; +PNAME(mout_sclk_fsys_usb_p) = {"fin_pll", "mout_bustop_pll_user"}; +PNAME(mout_sclk_fsys_mmc_sdclkin_a_p) = {"fin_pll", "mout_bustop_pll_user"}; +PNAME(mout_sclk_fsys_mmc0_sdclkin_b_p) = {"mout_sclk_fsys_mmc0_sdclkin_a", + "mout_mediatop_pll_user"}; +PNAME(mout_sclk_fsys_mmc1_sdclkin_b_p) = {"mout_sclk_fsys_mmc1_sdclkin_a", + "mout_mediatop_pll_user"}; +PNAME(mout_sclk_fsys_mmc2_sdclkin_b_p) = {"mout_sclk_fsys_mmc2_sdclkin_a", + "mout_mediatop_pll_user"}; + +struct samsung_mux_clock top_mux_clks[] __initdata = { + MUX(TOP_MOUT_MEDIATOP_PLL_USER, "mout_mediatop_pll_user", + mout_mediatop_pll_user_p, + MUX_SEL_TOP_PLL0, 0, 1), + MUX(TOP_MOUT_MEMTOP_PLL_USER, "mout_memtop_pll_user", + mout_memtop_pll_user_p, + MUX_SEL_TOP_PLL0, 4, 1), + MUX(TOP_MOUT_BUSTOP_PLL_USER, "mout_bustop_pll_user", + mout_bustop_pll_user_p, + MUX_SEL_TOP_PLL0, 8, 1), + MUX(TOP_MOUT_DISP_PLL, "mout_disp_pll", mout_disp_pll_p, + MUX_SEL_TOP_PLL0, 12, 1), + MUX(TOP_MOUT_AUD_PLL, "mout_aud_pll", mout_aud_pll_p, + MUX_SEL_TOP_PLL0, 16, 1), + MUX(TOP_MOUT_AUDTOP_PLL_USER, "mout_audtop_pll_user", + mout_audtop_pll_user_p, + MUX_SEL_TOP_PLL0, 24, 1), + + MUX(TOP_MOUT_DISP_DISP_333, "mout_disp_disp_333", mout_disp_disp_333_p, + MUX_SEL_TOP_DISP0, 0, 1), + MUX(TOP_MOUT_ACLK_DISP_333, "mout_aclk_disp_333", mout_aclk_disp_333_p, + MUX_SEL_TOP_DISP0, 8, 1), + MUX(TOP_MOUT_DISP_DISP_222, "mout_disp_disp_222", mout_disp_disp_222_p, + MUX_SEL_TOP_DISP0, 12, 1), + MUX(TOP_MOUT_ACLK_DISP_222, "mout_aclk_disp_222", mout_aclk_disp_222_p, + MUX_SEL_TOP_DISP0, 20, 1), + + MUX(TOP_MOUT_FIMD1, "mout_sclk_disp_pixel", mout_sclk_disp_pixel_p, + MUX_SEL_TOP_DISP1, 0, 1), + MUX(TOP_MOUT_DISP_MEDIA_PIXEL, "mout_disp_media_pixel", + mout_disp_media_pixel_p, + MUX_SEL_TOP_DISP1, 8, 1), + + MUX(TOP_MOUT_SCLK_PERI_SPI2_CLK, "mout_sclk_peri_spi2_clk", + mout_sclk_peri_spi_clk_p, + MUX_SEL_TOP_PERI1, 0, 1), + MUX(TOP_MOUT_SCLK_PERI_SPI1_CLK, "mout_sclk_peri_spi1_clk", + mout_sclk_peri_spi_clk_p, + MUX_SEL_TOP_PERI1, 4, 1), + MUX(TOP_MOUT_SCLK_PERI_SPI0_CLK, "mout_sclk_peri_spi0_clk", + mout_sclk_peri_spi_clk_p, + MUX_SEL_TOP_PERI1, 8, 1), + MUX(TOP_MOUT_SCLK_PERI_UART1_UCLK, "mout_sclk_peri_uart1_uclk", + mout_sclk_peri_uart_uclk_p, + MUX_SEL_TOP_PERI1, 12, 1), + MUX(TOP_MOUT_SCLK_PERI_UART2_UCLK, "mout_sclk_peri_uart2_uclk", + mout_sclk_peri_uart_uclk_p, + MUX_SEL_TOP_PERI1, 16, 1), + MUX(TOP_MOUT_SCLK_PERI_UART0_UCLK, "mout_sclk_peri_uart0_uclk", + mout_sclk_peri_uart_uclk_p, + MUX_SEL_TOP_PERI1, 20, 1), + + + MUX(TOP_MOUT_BUS1_BUSTOP_400, "mout_bus1_bustop_400", + mout_bus_bustop_400_p, + MUX_SEL_TOP_BUS, 0, 1), + MUX(TOP_MOUT_BUS1_BUSTOP_100, "mout_bus1_bustop_100", + mout_bus_bustop_100_p, + MUX_SEL_TOP_BUS, 4, 1), + MUX(TOP_MOUT_BUS2_BUSTOP_100, "mout_bus2_bustop_100", + mout_bus_bustop_100_p, + MUX_SEL_TOP_BUS, 8, 1), + MUX(TOP_MOUT_BUS2_BUSTOP_400, "mout_bus2_bustop_400", + mout_bus_bustop_400_p, + MUX_SEL_TOP_BUS, 12, 1), + MUX(TOP_MOUT_BUS3_BUSTOP_400, "mout_bus3_bustop_400", + mout_bus_bustop_400_p, + MUX_SEL_TOP_BUS, 16, 1), + MUX(TOP_MOUT_BUS3_BUSTOP_100, "mout_bus3_bustop_100", + mout_bus_bustop_100_p, + MUX_SEL_TOP_BUS, 20, 1), + MUX(TOP_MOUT_BUS4_BUSTOP_400, "mout_bus4_bustop_400", + mout_bus_bustop_400_p, + MUX_SEL_TOP_BUS, 24, 1), + MUX(TOP_MOUT_BUS4_BUSTOP_100, "mout_bus4_bustop_100", + mout_bus_bustop_100_p, + MUX_SEL_TOP_BUS, 28, 1), + + MUX(TOP_MOUT_SCLK_FSYS_USB, "mout_sclk_fsys_usb", + mout_sclk_fsys_usb_p, + MUX_SEL_TOP_FSYS, 0, 1), + MUX(TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A, "mout_sclk_fsys_mmc2_sdclkin_a", + mout_sclk_fsys_mmc_sdclkin_a_p, + MUX_SEL_TOP_FSYS, 4, 1), + MUX(TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_B, "mout_sclk_fsys_mmc2_sdclkin_b", + mout_sclk_fsys_mmc2_sdclkin_b_p, + MUX_SEL_TOP_FSYS, 8, 1), + MUX(TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A, "mout_sclk_fsys_mmc1_sdclkin_a", + mout_sclk_fsys_mmc_sdclkin_a_p, + MUX_SEL_TOP_FSYS, 12, 1), + MUX(TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_B, "mout_sclk_fsys_mmc1_sdclkin_b", + mout_sclk_fsys_mmc1_sdclkin_b_p, + MUX_SEL_TOP_FSYS, 16, 1), + MUX(TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A, "mout_sclk_fsys_mmc0_sdclkin_a", + mout_sclk_fsys_mmc_sdclkin_a_p, + MUX_SEL_TOP_FSYS, 20, 1), + MUX(TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_B, "mout_sclk_fsys_mmc0_sdclkin_b", + mout_sclk_fsys_mmc0_sdclkin_b_p, + MUX_SEL_TOP_FSYS, 24, 1), + + MUX(TOP_MOUT_ISP1_MEDIA_400, "mout_isp1_media_400", + mout_isp1_media_400_p, + MUX_SEL_TOP_ISP10, 4, 1), + MUX(TOP_MOUT_ACLK_ISP1_400, "mout_aclk_isp1_400", mout_aclk_isp1_400_p, + MUX_SEL_TOP_ISP10, 8 , 1), + MUX(TOP_MOUT_ISP1_MEDIA_266, "mout_isp1_media_266", + mout_isp1_media_266_p, + MUX_SEL_TOP_ISP10, 16, 1), + MUX(TOP_MOUT_ACLK_ISP1_266, "mout_aclk_isp1_266", mout_aclk_isp1_266_p, + MUX_SEL_TOP_ISP10, 20, 1), + + MUX(TOP_MOUT_SCLK_ISP1_SPI0, "mout_sclk_isp1_spi0", mout_sclk_isp_spi_p, + MUX_SEL_TOP_ISP11, 4, 1), + MUX(TOP_MOUT_SCLK_ISP1_SPI1, "mout_sclk_isp1_spi1", mout_sclk_isp_spi_p, + MUX_SEL_TOP_ISP11, 8, 1), + MUX(TOP_MOUT_SCLK_ISP1_UART, "mout_sclk_isp1_uart", + mout_sclk_isp_uart_p, + MUX_SEL_TOP_ISP11, 12, 1), + MUX(TOP_MOUT_SCLK_ISP1_SENSOR0, "mout_sclk_isp1_sensor0", + mout_sclk_isp_sensor_p, + MUX_SEL_TOP_ISP11, 16, 1), + MUX(TOP_MOUT_SCLK_ISP1_SENSOR1, "mout_sclk_isp1_sensor1", + mout_sclk_isp_sensor_p, + MUX_SEL_TOP_ISP11, 20, 1), + MUX(TOP_MOUT_SCLK_ISP1_SENSOR2, "mout_sclk_isp1_sensor2", + mout_sclk_isp_sensor_p, + MUX_SEL_TOP_ISP11, 24, 1), + + MUX(TOP_MOUT_MFC_BUSTOP_333, "mout_mfc_bustop_333", + mout_mfc_bustop_333_p, + MUX_SEL_TOP_MFC, 4, 1), + MUX(TOP_MOUT_ACLK_MFC_333, "mout_aclk_mfc_333", mout_aclk_mfc_333_p, + MUX_SEL_TOP_MFC, 8, 1), + + MUX(TOP_MOUT_G2D_BUSTOP_333, "mout_g2d_bustop_333", + mout_g2d_bustop_333_p, + MUX_SEL_TOP_G2D, 4, 1), + MUX(TOP_MOUT_ACLK_G2D_333, "mout_aclk_g2d_333", mout_aclk_g2d_333_p, + MUX_SEL_TOP_G2D, 8, 1), + + MUX(TOP_MOUT_M2M_MEDIATOP_400, "mout_m2m_mediatop_400", + mout_m2m_mediatop_400_p, + MUX_SEL_TOP_GSCL, 0, 1), + MUX(TOP_MOUT_ACLK_GSCL_400, "mout_aclk_gscl_400", + mout_aclk_gscl_400_p, + MUX_SEL_TOP_GSCL, 4, 1), + MUX(TOP_MOUT_GSCL_BUSTOP_333, "mout_gscl_bustop_333", + mout_gscl_bustop_333_p, + MUX_SEL_TOP_GSCL, 8, 1), + MUX(TOP_MOUT_ACLK_GSCL_333, "mout_aclk_gscl_333", + mout_aclk_gscl_333_p, + MUX_SEL_TOP_GSCL, 12, 1), + MUX(TOP_MOUT_GSCL_BUSTOP_FIMC, "mout_gscl_bustop_fimc", + mout_gscl_bustop_fimc_p, + MUX_SEL_TOP_GSCL, 16, 1), + MUX(TOP_MOUT_ACLK_GSCL_FIMC, "mout_aclk_gscl_fimc", + mout_aclk_gscl_fimc_p, + MUX_SEL_TOP_GSCL, 20, 1), +}; + +struct samsung_div_clock top_div_clks[] __initdata = { + DIV(TOP_DOUT_ACLK_G2D_333, "dout_aclk_g2d_333", "mout_aclk_g2d_333", + DIV_TOP_G2D_MFC, 0, 3), + DIV(TOP_DOUT_ACLK_MFC_333, "dout_aclk_mfc_333", "mout_aclk_mfc_333", + DIV_TOP_G2D_MFC, 4, 3), + + DIV(TOP_DOUT_ACLK_GSCL_333, "dout_aclk_gscl_333", "mout_aclk_gscl_333", + DIV_TOP_GSCL_ISP0, 0, 3), + DIV(TOP_DOUT_ACLK_GSCL_400, "dout_aclk_gscl_400", "mout_aclk_gscl_400", + DIV_TOP_GSCL_ISP0, 4, 3), + DIV(TOP_DOUT_ACLK_GSCL_FIMC, "dout_aclk_gscl_fimc", + "mout_aclk_gscl_fimc", DIV_TOP_GSCL_ISP0, 8, 3), + DIV(TOP_DOUT_SCLK_ISP1_SENSOR0_A, "dout_sclk_isp1_sensor0_a", + "mout_aclk_gscl_fimc", DIV_TOP_GSCL_ISP0, 16, 4), + DIV(TOP_DOUT_SCLK_ISP1_SENSOR1_A, "dout_sclk_isp1_sensor1_a", + "mout_aclk_gscl_400", DIV_TOP_GSCL_ISP0, 20, 4), + DIV(TOP_DOUT_SCLK_ISP1_SENSOR2_A, "dout_sclk_isp1_sensor2_a", + "mout_aclk_gscl_fimc", DIV_TOP_GSCL_ISP0, 24, 4), + + DIV(TOP_DOUT_ACLK_ISP1_266, "dout_aclk_isp1_266", "mout_aclk_isp1_266", + DIV_TOP_ISP10, 0, 3), + DIV(TOP_DOUT_ACLK_ISP1_400, "dout_aclk_isp1_400", "mout_aclk_isp1_400", + DIV_TOP_ISP10, 4, 3), + DIV(TOP_DOUT_SCLK_ISP1_SPI0_A, "dout_sclk_isp1_spi0_a", + "mout_sclk_isp1_spi0", DIV_TOP_ISP10, 12, 4), + DIV(TOP_DOUT_SCLK_ISP1_SPI0_B, "dout_sclk_isp1_spi0_b", + "dout_sclk_isp1_spi0_a", DIV_TOP_ISP10, 16, 8), + + DIV(TOP_DOUT_SCLK_ISP1_SPI1_A, "dout_sclk_isp1_spi1_a", + "mout_sclk_isp1_spi1", DIV_TOP_ISP11, 0, 4), + DIV(TOP_DOUT_SCLK_ISP1_SPI1_B, "dout_sclk_isp1_spi1_b", + "dout_sclk_isp1_spi1_a", DIV_TOP_ISP11, 4, 8), + DIV(TOP_DOUT_SCLK_ISP1_UART, "dout_sclk_isp1_uart", + "mout_sclk_isp1_uart", DIV_TOP_ISP11, 12, 4), + DIV(TOP_DOUT_SCLK_ISP1_SENSOR0_B, "dout_sclk_isp1_sensor0_b", + "dout_sclk_isp1_sensor0_a", DIV_TOP_ISP11, 16, 4), + DIV(TOP_DOUT_SCLK_ISP1_SENSOR1_B, "dout_sclk_isp1_sensor1_b", + "dout_sclk_isp1_sensor1_a", DIV_TOP_ISP11, 20, 4), + DIV(TOP_DOUT_SCLK_ISP1_SENSOR2_B, "dout_sclk_isp1_sensor2_b", + "dout_sclk_isp1_sensor2_a", DIV_TOP_ISP11, 24, 4), + + DIV(TOP_DOUTTOP__SCLK_HPM_TARGETCLK, "dout_sclk_hpm_targetclk", + "mout_bustop_pll_user", DIV_TOP_HPM, 0, 3), + + DIV(TOP_DOUT_ACLK_DISP_333, "dout_aclk_disp_333", "mout_aclk_disp_333", + DIV_TOP_DISP, 0, 3), + DIV(TOP_DOUT_ACLK_DISP_222, "dout_aclk_disp_222", "mout_aclk_disp_222", + DIV_TOP_DISP, 4, 3), + DIV(TOP_DOUT_SCLK_DISP_PIXEL, "dout_sclk_disp_pixel", + "mout_sclk_disp_pixel", DIV_TOP_DISP, 8, 3), + + DIV(TOP_DOUT_ACLK_BUS1_400, "dout_aclk_bus1_400", + "mout_bus1_bustop_400", DIV_TOP_BUS, 0, 3), + DIV(TOP_DOUT_ACLK_BUS1_100, "dout_aclk_bus1_100", + "mout_bus1_bustop_100", DIV_TOP_BUS, 4, 4), + DIV(TOP_DOUT_ACLK_BUS2_400, "dout_aclk_bus2_400", + "mout_bus2_bustop_400", DIV_TOP_BUS, 8, 3), + DIV(TOP_DOUT_ACLK_BUS2_100, "dout_aclk_bus2_100", + "mout_bus2_bustop_100", DIV_TOP_BUS, 12, 4), + DIV(TOP_DOUT_ACLK_BUS3_400, "dout_aclk_bus3_400", + "mout_bus3_bustop_400", DIV_TOP_BUS, 16, 3), + DIV(TOP_DOUT_ACLK_BUS3_100, "dout_aclk_bus3_100", + "mout_bus3_bustop_100", DIV_TOP_BUS, 20, 4), + DIV(TOP_DOUT_ACLK_BUS4_400, "dout_aclk_bus4_400", + "mout_bus4_bustop_400", DIV_TOP_BUS, 24, 3), + DIV(TOP_DOUT_ACLK_BUS4_100, "dout_aclk_bus4_100", + "mout_bus4_bustop_100", DIV_TOP_BUS, 28, 4), + + DIV(TOP_DOUT_SCLK_PERI_SPI0_A, "dout_sclk_peri_spi0_a", + "mout_sclk_peri_spi0_clk", DIV_TOP_PERI0, 4, 4), + DIV(TOP_DOUT_SCLK_PERI_SPI0_B, "dout_sclk_peri_spi0_b", + "dout_sclk_peri_spi0_a", DIV_TOP_PERI0, 8, 8), + DIV(TOP_DOUT_SCLK_PERI_SPI1_A, "dout_sclk_peri_spi1_a", + "mout_sclk_peri_spi1_clk", DIV_TOP_PERI0, 16, 4), + DIV(TOP_DOUT_SCLK_PERI_SPI1_B, "dout_sclk_peri_spi1_b", + "dout_sclk_peri_spi1_a", DIV_TOP_PERI0, 20, 8), + + DIV(TOP_DOUT_SCLK_PERI_SPI2_A, "dout_sclk_peri_spi2_a", + "mout_sclk_peri_spi2_clk", DIV_TOP_PERI1, 0, 4), + DIV(TOP_DOUT_SCLK_PERI_SPI2_B, "dout_sclk_peri_spi2_b", + "dout_sclk_peri_spi2_a", DIV_TOP_PERI1, 4, 8), + DIV(TOP_DOUT_SCLK_PERI_UART1, "dout_sclk_peri_uart1", + "mout_sclk_peri_uart1_uclk", DIV_TOP_PERI1, 16, 4), + DIV(TOP_DOUT_SCLK_PERI_UART2, "dout_sclk_peri_uart2", + "mout_sclk_peri_uart2_uclk", DIV_TOP_PERI1, 20, 4), + DIV(TOP_DOUT_SCLK_PERI_UART0, "dout_sclk_peri_uart0", + "mout_sclk_peri_uart0_uclk", DIV_TOP_PERI1, 24, 4), + + DIV(TOP_DOUT_ACLK_PERI_66, "dout_aclk_peri_66", "mout_bustop_pll_user", + DIV_TOP_PERI2, 20, 4), + DIV(TOP_DOUT_ACLK_PERI_AUD, "dout_aclk_peri_aud", + "mout_audtop_pll_user", DIV_TOP_PERI2, 24, 3), + + DIV(TOP_DOUT_ACLK_FSYS_200, "dout_aclk_fsys_200", + "mout_bustop_pll_user", DIV_TOP_FSYS0, 0, 3), + DIV(TOP_DOUT_SCLK_FSYS_USBDRD30_SUSPEND_CLK, + "dout_sclk_fsys_usbdrd30_suspend_clk", + "mout_sclk_fsys_usb", DIV_TOP_FSYS0, 4, 4), + DIV(TOP_DOUT_SCLK_FSYS_MMC0_SDCLKIN_A, "dout_sclk_fsys_mmc0_sdclkin_a", + "mout_sclk_fsys_mmc0_sdclkin_b", + DIV_TOP_FSYS0, 12, 4), + DIV(TOP_DOUT_SCLK_FSYS_MMC0_SDCLKIN_B, "dout_sclk_fsys_mmc0_sdclkin_b", + "dout_sclk_fsys_mmc0_sdclkin_a", + DIV_TOP_FSYS0, 16, 8), + + + DIV(TOP_DOUT_SCLK_FSYS_MMC1_SDCLKIN_A, "dout_sclk_fsys_mmc1_sdclkin_a", + "mout_sclk_fsys_mmc1_sdclkin_b", + DIV_TOP_FSYS1, 0, 4), + DIV(TOP_DOUT_SCLK_FSYS_MMC1_SDCLKIN_B, "dout_sclk_fsys_mmc1_sdclkin_b", + "dout_sclk_fsys_mmc1_sdclkin_a", + DIV_TOP_FSYS1, 4, 8), + DIV(TOP_DOUT_SCLK_FSYS_MMC2_SDCLKIN_A, "dout_sclk_fsys_mmc2_sdclkin_a", + "mout_sclk_fsys_mmc2_sdclkin_b", + DIV_TOP_FSYS1, 12, 4), + DIV(TOP_DOUT_SCLK_FSYS_MMC2_SDCLKIN_B, "dout_sclk_fsys_mmc2_sdclkin_b", + "dout_sclk_fsys_mmc2_sdclkin_a", + DIV_TOP_FSYS1, 16, 8), + +}; + +struct samsung_gate_clock top_gate_clks[] __initdata = { + GATE(TOP_SCLK_MMC0, "sclk_fsys_mmc0_sdclkin", + "dout_sclk_fsys_mmc0_sdclkin_b", + EN_SCLK_TOP, 7, CLK_SET_RATE_PARENT, 0), + GATE(TOP_SCLK_MMC1, "sclk_fsys_mmc1_sdclkin", + "dout_sclk_fsys_mmc1_sdclkin_b", + EN_SCLK_TOP, 8, CLK_SET_RATE_PARENT, 0), + GATE(TOP_SCLK_MMC2, "sclk_fsys_mmc2_sdclkin", + "dout_sclk_fsys_mmc2_sdclkin_b", + EN_SCLK_TOP, 9, CLK_SET_RATE_PARENT, 0), + GATE(TOP_SCLK_FIMD1, "sclk_disp_pixel", "dout_sclk_disp_pixel", + EN_ACLK_TOP, 10, CLK_IGNORE_UNUSED | + CLK_SET_RATE_PARENT, 0), +}; + +static struct samsung_pll_clock top_pll_clks[] __initdata = { + PLL(pll_2550xx, TOP_FOUT_DISP_PLL, "fout_disp_pll", "fin_pll", + DISP_PLL_LOCK, DISP_PLL_CON0, + pll2550_24mhz_tbl), + PLL(pll_2650xx, TOP_FOUT_AUD_PLL, "fout_aud_pll", "fin_pll", + AUD_PLL_LOCK, AUD_PLL_CON0, + pll2650_24mhz_tbl), +}; + +static void __init exynos5260_clk_top_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu = {0}; + + cmu.pll_clks = top_pll_clks; + cmu.nr_pll_clks = ARRAY_SIZE(top_pll_clks); + cmu.mux_clks = top_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(top_mux_clks); + cmu.div_clks = top_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(top_div_clks); + cmu.gate_clks = top_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(top_gate_clks); + cmu.fixed_clks = fixed_rate_clks; + cmu.nr_fixed_clks = ARRAY_SIZE(fixed_rate_clks); + cmu.nr_clk_ids = TOP_NR_CLK; + cmu.clk_regs = top_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(top_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_top, "samsung,exynos5260-clock-top", + exynos5260_clk_top_init); diff --git a/drivers/clk/samsung/clk-exynos5260.h b/drivers/clk/samsung/clk-exynos5260.h new file mode 100644 index 000000000000..d739716d6ea1 --- /dev/null +++ b/drivers/clk/samsung/clk-exynos5260.h @@ -0,0 +1,459 @@ +/* + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * Author: Rahul Sharma <rahul.sharma@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common Clock Framework support for Exynos5260 SoC. + */ + +#ifndef __CLK_EXYNOS5260_H +#define __CLK_EXYNOS5260_H + +/* +*Registers for CMU_AUD +*/ +#define MUX_SEL_AUD 0x0200 +#define MUX_ENABLE_AUD 0x0300 +#define MUX_STAT_AUD 0x0400 +#define MUX_IGNORE_AUD 0x0500 +#define DIV_AUD0 0x0600 +#define DIV_AUD1 0x0604 +#define DIV_STAT_AUD0 0x0700 +#define DIV_STAT_AUD1 0x0704 +#define EN_ACLK_AUD 0x0800 +#define EN_PCLK_AUD 0x0900 +#define EN_SCLK_AUD 0x0a00 +#define EN_IP_AUD 0x0b00 + +/* +*Registers for CMU_DISP +*/ +#define MUX_SEL_DISP0 0x0200 +#define MUX_SEL_DISP1 0x0204 +#define MUX_SEL_DISP2 0x0208 +#define MUX_SEL_DISP3 0x020C +#define MUX_SEL_DISP4 0x0210 +#define MUX_ENABLE_DISP0 0x0300 +#define MUX_ENABLE_DISP1 0x0304 +#define MUX_ENABLE_DISP2 0x0308 +#define MUX_ENABLE_DISP3 0x030c +#define MUX_ENABLE_DISP4 0x0310 +#define MUX_STAT_DISP0 0x0400 +#define MUX_STAT_DISP1 0x0404 +#define MUX_STAT_DISP2 0x0408 +#define MUX_STAT_DISP3 0x040c +#define MUX_STAT_DISP4 0x0410 +#define MUX_IGNORE_DISP0 0x0500 +#define MUX_IGNORE_DISP1 0x0504 +#define MUX_IGNORE_DISP2 0x0508 +#define MUX_IGNORE_DISP3 0x050c +#define MUX_IGNORE_DISP4 0x0510 +#define DIV_DISP 0x0600 +#define DIV_STAT_DISP 0x0700 +#define EN_ACLK_DISP 0x0800 +#define EN_PCLK_DISP 0x0900 +#define EN_SCLK_DISP0 0x0a00 +#define EN_SCLK_DISP1 0x0a04 +#define EN_IP_DISP 0x0b00 +#define EN_IP_DISP_BUS 0x0b04 + + +/* +*Registers for CMU_EGL +*/ +#define EGL_PLL_LOCK 0x0000 +#define EGL_DPLL_LOCK 0x0004 +#define EGL_PLL_CON0 0x0100 +#define EGL_PLL_CON1 0x0104 +#define EGL_PLL_FREQ_DET 0x010c +#define EGL_DPLL_CON0 0x0110 +#define EGL_DPLL_CON1 0x0114 +#define EGL_DPLL_FREQ_DET 0x011c +#define MUX_SEL_EGL 0x0200 +#define MUX_ENABLE_EGL 0x0300 +#define MUX_STAT_EGL 0x0400 +#define DIV_EGL 0x0600 +#define DIV_EGL_PLL_FDET 0x0604 +#define DIV_STAT_EGL 0x0700 +#define DIV_STAT_EGL_PLL_FDET 0x0704 +#define EN_ACLK_EGL 0x0800 +#define EN_PCLK_EGL 0x0900 +#define EN_SCLK_EGL 0x0a00 +#define EN_IP_EGL 0x0b00 +#define CLKOUT_CMU_EGL 0x0c00 +#define CLKOUT_CMU_EGL_DIV_STAT 0x0c04 +#define ARMCLK_STOPCTRL 0x1000 +#define EAGLE_EMA_CTRL 0x1008 +#define EAGLE_EMA_STATUS 0x100c +#define PWR_CTRL 0x1020 +#define PWR_CTRL2 0x1024 +#define CLKSTOP_CTRL 0x1028 +#define INTR_SPREAD_EN 0x1080 +#define INTR_SPREAD_USE_STANDBYWFI 0x1084 +#define INTR_SPREAD_BLOCKING_DURATION 0x1088 +#define CMU_EGL_SPARE0 0x2000 +#define CMU_EGL_SPARE1 0x2004 +#define CMU_EGL_SPARE2 0x2008 +#define CMU_EGL_SPARE3 0x200c +#define CMU_EGL_SPARE4 0x2010 + +/* +*Registers for CMU_FSYS +*/ + +#define MUX_SEL_FSYS0 0x0200 +#define MUX_SEL_FSYS1 0x0204 +#define MUX_ENABLE_FSYS0 0x0300 +#define MUX_ENABLE_FSYS1 0x0304 +#define MUX_STAT_FSYS0 0x0400 +#define MUX_STAT_FSYS1 0x0404 +#define MUX_IGNORE_FSYS0 0x0500 +#define MUX_IGNORE_FSYS1 0x0504 +#define EN_ACLK_FSYS 0x0800 +#define EN_ACLK_FSYS_SECURE_RTIC 0x0804 +#define EN_ACLK_FSYS_SECURE_SMMU_RTIC 0x0808 +#define EN_PCLK_FSYS 0x0900 +#define EN_SCLK_FSYS 0x0a00 +#define EN_IP_FSYS 0x0b00 +#define EN_IP_FSYS_SECURE_RTIC 0x0b04 +#define EN_IP_FSYS_SECURE_SMMU_RTIC 0x0b08 + +/* +*Registers for CMU_G2D +*/ + +#define MUX_SEL_G2D 0x0200 +#define MUX_ENABLE_G2D 0x0300 +#define MUX_STAT_G2D 0x0400 +#define DIV_G2D 0x0600 +#define DIV_STAT_G2D 0x0700 +#define EN_ACLK_G2D 0x0800 +#define EN_ACLK_G2D_SECURE_SSS 0x0804 +#define EN_ACLK_G2D_SECURE_SLIM_SSS 0x0808 +#define EN_ACLK_G2D_SECURE_SMMU_SLIM_SSS 0x080c +#define EN_ACLK_G2D_SECURE_SMMU_SSS 0x0810 +#define EN_ACLK_G2D_SECURE_SMMU_MDMA 0x0814 +#define EN_ACLK_G2D_SECURE_SMMU_G2D 0x0818 +#define EN_PCLK_G2D 0x0900 +#define EN_PCLK_G2D_SECURE_SMMU_SLIM_SSS 0x0904 +#define EN_PCLK_G2D_SECURE_SMMU_SSS 0x0908 +#define EN_PCLK_G2D_SECURE_SMMU_MDMA 0x090c +#define EN_PCLK_G2D_SECURE_SMMU_G2D 0x0910 +#define EN_IP_G2D 0x0b00 +#define EN_IP_G2D_SECURE_SSS 0x0b04 +#define EN_IP_G2D_SECURE_SLIM_SSS 0x0b08 +#define EN_IP_G2D_SECURE_SMMU_SLIM_SSS 0x0b0c +#define EN_IP_G2D_SECURE_SMMU_SSS 0x0b10 +#define EN_IP_G2D_SECURE_SMMU_MDMA 0x0b14 +#define EN_IP_G2D_SECURE_SMMU_G2D 0x0b18 + +/* +*Registers for CMU_G3D +*/ + +#define G3D_PLL_LOCK 0x0000 +#define G3D_PLL_CON0 0x0100 +#define G3D_PLL_CON1 0x0104 +#define G3D_PLL_FDET 0x010c +#define MUX_SEL_G3D 0x0200 +#define MUX_EN_G3D 0x0300 +#define MUX_STAT_G3D 0x0400 +#define MUX_IGNORE_G3D 0x0500 +#define DIV_G3D 0x0600 +#define DIV_G3D_PLL_FDET 0x0604 +#define DIV_STAT_G3D 0x0700 +#define DIV_STAT_G3D_PLL_FDET 0x0704 +#define EN_ACLK_G3D 0x0800 +#define EN_PCLK_G3D 0x0900 +#define EN_SCLK_G3D 0x0a00 +#define EN_IP_G3D 0x0b00 +#define CLKOUT_CMU_G3D 0x0c00 +#define CLKOUT_CMU_G3D_DIV_STAT 0x0c04 +#define G3DCLK_STOPCTRL 0x1000 +#define G3D_EMA_CTRL 0x1008 +#define G3D_EMA_STATUS 0x100c + +/* +*Registers for CMU_GSCL +*/ + +#define MUX_SEL_GSCL 0x0200 +#define MUX_EN_GSCL 0x0300 +#define MUX_STAT_GSCL 0x0400 +#define MUX_IGNORE_GSCL 0x0500 +#define DIV_GSCL 0x0600 +#define DIV_STAT_GSCL 0x0700 +#define EN_ACLK_GSCL 0x0800 +#define EN_ACLK_GSCL_FIMC 0x0804 +#define EN_ACLK_GSCL_SECURE_SMMU_GSCL0 0x0808 +#define EN_ACLK_GSCL_SECURE_SMMU_GSCL1 0x080c +#define EN_ACLK_GSCL_SECURE_SMMU_MSCL0 0x0810 +#define EN_ACLK_GSCL_SECURE_SMMU_MSCL1 0x0814 +#define EN_PCLK_GSCL 0x0900 +#define EN_PCLK_GSCL_FIMC 0x0904 +#define EN_PCLK_GSCL_SECURE_SMMU_GSCL0 0x0908 +#define EN_PCLK_GSCL_SECURE_SMMU_GSCL1 0x090c +#define EN_PCLK_GSCL_SECURE_SMMU_MSCL0 0x0910 +#define EN_PCLK_GSCL_SECURE_SMMU_MSCL1 0x0914 +#define EN_SCLK_GSCL 0x0a00 +#define EN_SCLK_GSCL_FIMC 0x0a04 +#define EN_IP_GSCL 0x0b00 +#define EN_IP_GSCL_FIMC 0x0b04 +#define EN_IP_GSCL_SECURE_SMMU_GSCL0 0x0b08 +#define EN_IP_GSCL_SECURE_SMMU_GSCL1 0x0b0c +#define EN_IP_GSCL_SECURE_SMMU_MSCL0 0x0b10 +#define EN_IP_GSCL_SECURE_SMMU_MSCL1 0x0b14 + +/* +*Registers for CMU_ISP +*/ +#define MUX_SEL_ISP0 0x0200 +#define MUX_SEL_ISP1 0x0204 +#define MUX_ENABLE_ISP0 0x0300 +#define MUX_ENABLE_ISP1 0x0304 +#define MUX_STAT_ISP0 0x0400 +#define MUX_STAT_ISP1 0x0404 +#define MUX_IGNORE_ISP0 0x0500 +#define MUX_IGNORE_ISP1 0x0504 +#define DIV_ISP 0x0600 +#define DIV_STAT_ISP 0x0700 +#define EN_ACLK_ISP0 0x0800 +#define EN_ACLK_ISP1 0x0804 +#define EN_PCLK_ISP0 0x0900 +#define EN_PCLK_ISP1 0x0904 +#define EN_SCLK_ISP 0x0a00 +#define EN_IP_ISP0 0x0b00 +#define EN_IP_ISP1 0x0b04 + +/* +*Registers for CMU_KFC +*/ +#define KFC_PLL_LOCK 0x0000 +#define KFC_PLL_CON0 0x0100 +#define KFC_PLL_CON1 0x0104 +#define KFC_PLL_FDET 0x010c +#define MUX_SEL_KFC0 0x0200 +#define MUX_SEL_KFC2 0x0208 +#define MUX_ENABLE_KFC0 0x0300 +#define MUX_ENABLE_KFC2 0x0308 +#define MUX_STAT_KFC0 0x0400 +#define MUX_STAT_KFC2 0x0408 +#define DIV_KFC 0x0600 +#define DIV_KFC_PLL_FDET 0x0604 +#define DIV_STAT_KFC 0x0700 +#define DIV_STAT_KFC_PLL_FDET 0x0704 +#define EN_ACLK_KFC 0x0800 +#define EN_PCLK_KFC 0x0900 +#define EN_SCLK_KFC 0x0a00 +#define EN_IP_KFC 0x0b00 +#define CLKOUT_CMU_KFC 0x0c00 +#define CLKOUT_CMU_KFC_DIV_STAT 0x0c04 +#define ARMCLK_STOPCTRL_KFC 0x1000 +#define ARM_EMA_CTRL 0x1008 +#define ARM_EMA_STATUS 0x100c +#define PWR_CTRL_KFC 0x1020 +#define PWR_CTRL2_KFC 0x1024 +#define CLKSTOP_CTRL_KFC 0x1028 +#define INTR_SPREAD_ENABLE_KFC 0x1080 +#define INTR_SPREAD_USE_STANDBYWFI_KFC 0x1084 +#define INTR_SPREAD_BLOCKING_DURATION_KFC 0x1088 +#define CMU_KFC_SPARE0 0x2000 +#define CMU_KFC_SPARE1 0x2004 +#define CMU_KFC_SPARE2 0x2008 +#define CMU_KFC_SPARE3 0x200c +#define CMU_KFC_SPARE4 0x2010 + +/* +*Registers for CMU_MFC +*/ +#define MUX_SEL_MFC 0x0200 +#define MUX_ENABLE_MFC 0x0300 +#define MUX_STAT_MFC 0x0400 +#define DIV_MFC 0x0600 +#define DIV_STAT_MFC 0x0700 +#define EN_ACLK_MFC 0x0800 +#define EN_ACLK_SECURE_SMMU2_MFC 0x0804 +#define EN_PCLK_MFC 0x0900 +#define EN_PCLK_SECURE_SMMU2_MFC 0x0904 +#define EN_IP_MFC 0x0b00 +#define EN_IP_MFC_SECURE_SMMU2_MFC 0x0b04 + +/* +*Registers for CMU_MIF +*/ +#define MEM_PLL_LOCK 0x0000 +#define BUS_PLL_LOCK 0x0004 +#define MEDIA_PLL_LOCK 0x0008 +#define MEM_PLL_CON0 0x0100 +#define MEM_PLL_CON1 0x0104 +#define MEM_PLL_FDET 0x010c +#define BUS_PLL_CON0 0x0110 +#define BUS_PLL_CON1 0x0114 +#define BUS_PLL_FDET 0x011c +#define MEDIA_PLL_CON0 0x0120 +#define MEDIA_PLL_CON1 0x0124 +#define MEDIA_PLL_FDET 0x012c +#define MUX_SEL_MIF 0x0200 +#define MUX_ENABLE_MIF 0x0300 +#define MUX_STAT_MIF 0x0400 +#define MUX_IGNORE_MIF 0x0500 +#define DIV_MIF 0x0600 +#define DIV_MIF_PLL_FDET 0x0604 +#define DIV_STAT_MIF 0x0700 +#define DIV_STAT_MIF_PLL_FDET 0x0704 +#define EN_ACLK_MIF 0x0800 +#define EN_ACLK_MIF_SECURE_DREX1_TZ 0x0804 +#define EN_ACLK_MIF_SECURE_DREX0_TZ 0x0808 +#define EN_ACLK_MIF_SECURE_INTMEM 0x080c +#define EN_PCLK_MIF 0x0900 +#define EN_PCLK_MIF_SECURE_MONOCNT 0x0904 +#define EN_PCLK_MIF_SECURE_RTC_APBIF 0x0908 +#define EN_PCLK_MIF_SECURE_DREX1_TZ 0x090c +#define EN_PCLK_MIF_SECURE_DREX0_TZ 0x0910 +#define EN_SCLK_MIF 0x0a00 +#define EN_IP_MIF 0x0b00 +#define EN_IP_MIF_SECURE_MONOCNT 0x0b04 +#define EN_IP_MIF_SECURE_RTC_APBIF 0x0b08 +#define EN_IP_MIF_SECURE_DREX1_TZ 0x0b0c +#define EN_IP_MIF_SECURE_DREX0_TZ 0x0b10 +#define EN_IP_MIF_SECURE_INTEMEM 0x0b14 +#define CLKOUT_CMU_MIF_DIV_STAT 0x0c04 +#define DREX_FREQ_CTRL 0x1000 +#define PAUSE 0x1004 +#define DDRPHY_LOCK_CTRL 0x1008 +#define CLKOUT_CMU_MIF 0xcb00 + +/* +*Registers for CMU_PERI +*/ +#define MUX_SEL_PERI 0x0200 +#define MUX_SEL_PERI1 0x0204 +#define MUX_ENABLE_PERI 0x0300 +#define MUX_ENABLE_PERI1 0x0304 +#define MUX_STAT_PERI 0x0400 +#define MUX_STAT_PERI1 0x0404 +#define MUX_IGNORE_PERI 0x0500 +#define MUX_IGNORE_PERI1 0x0504 +#define DIV_PERI 0x0600 +#define DIV_STAT_PERI 0x0700 +#define EN_PCLK_PERI0 0x0800 +#define EN_PCLK_PERI1 0x0804 +#define EN_PCLK_PERI2 0x0808 +#define EN_PCLK_PERI3 0x080c +#define EN_PCLK_PERI_SECURE_CHIPID 0x0810 +#define EN_PCLK_PERI_SECURE_PROVKEY0 0x0814 +#define EN_PCLK_PERI_SECURE_PROVKEY1 0x0818 +#define EN_PCLK_PERI_SECURE_SECKEY 0x081c +#define EN_PCLK_PERI_SECURE_ANTIRBKCNT 0x0820 +#define EN_PCLK_PERI_SECURE_TOP_RTC 0x0824 +#define EN_PCLK_PERI_SECURE_TZPC 0x0828 +#define EN_SCLK_PERI 0x0a00 +#define EN_SCLK_PERI_SECURE_TOP_RTC 0x0a04 +#define EN_IP_PERI0 0x0b00 +#define EN_IP_PERI1 0x0b04 +#define EN_IP_PERI2 0x0b08 +#define EN_IP_PERI_SECURE_CHIPID 0x0b0c +#define EN_IP_PERI_SECURE_PROVKEY0 0x0b10 +#define EN_IP_PERI_SECURE_PROVKEY1 0x0b14 +#define EN_IP_PERI_SECURE_SECKEY 0x0b18 +#define EN_IP_PERI_SECURE_ANTIRBKCNT 0x0b1c +#define EN_IP_PERI_SECURE_TOP_RTC 0x0b20 +#define EN_IP_PERI_SECURE_TZPC 0x0b24 + +/* +*Registers for CMU_TOP +*/ +#define DISP_PLL_LOCK 0x0000 +#define AUD_PLL_LOCK 0x0004 +#define DISP_PLL_CON0 0x0100 +#define DISP_PLL_CON1 0x0104 +#define DISP_PLL_FDET 0x0108 +#define AUD_PLL_CON0 0x0110 +#define AUD_PLL_CON1 0x0114 +#define AUD_PLL_CON2 0x0118 +#define AUD_PLL_FDET 0x011c +#define MUX_SEL_TOP_PLL0 0x0200 +#define MUX_SEL_TOP_MFC 0x0204 +#define MUX_SEL_TOP_G2D 0x0208 +#define MUX_SEL_TOP_GSCL 0x020c +#define MUX_SEL_TOP_ISP10 0x0214 +#define MUX_SEL_TOP_ISP11 0x0218 +#define MUX_SEL_TOP_DISP0 0x021c +#define MUX_SEL_TOP_DISP1 0x0220 +#define MUX_SEL_TOP_BUS 0x0224 +#define MUX_SEL_TOP_PERI0 0x0228 +#define MUX_SEL_TOP_PERI1 0x022c +#define MUX_SEL_TOP_FSYS 0x0230 +#define MUX_ENABLE_TOP_PLL0 0x0300 +#define MUX_ENABLE_TOP_MFC 0x0304 +#define MUX_ENABLE_TOP_G2D 0x0308 +#define MUX_ENABLE_TOP_GSCL 0x030c +#define MUX_ENABLE_TOP_ISP10 0x0314 +#define MUX_ENABLE_TOP_ISP11 0x0318 +#define MUX_ENABLE_TOP_DISP0 0x031c +#define MUX_ENABLE_TOP_DISP1 0x0320 +#define MUX_ENABLE_TOP_BUS 0x0324 +#define MUX_ENABLE_TOP_PERI0 0x0328 +#define MUX_ENABLE_TOP_PERI1 0x032c +#define MUX_ENABLE_TOP_FSYS 0x0330 +#define MUX_STAT_TOP_PLL0 0x0400 +#define MUX_STAT_TOP_MFC 0x0404 +#define MUX_STAT_TOP_G2D 0x0408 +#define MUX_STAT_TOP_GSCL 0x040c +#define MUX_STAT_TOP_ISP10 0x0414 +#define MUX_STAT_TOP_ISP11 0x0418 +#define MUX_STAT_TOP_DISP0 0x041c +#define MUX_STAT_TOP_DISP1 0x0420 +#define MUX_STAT_TOP_BUS 0x0424 +#define MUX_STAT_TOP_PERI0 0x0428 +#define MUX_STAT_TOP_PERI1 0x042c +#define MUX_STAT_TOP_FSYS 0x0430 +#define MUX_IGNORE_TOP_PLL0 0x0500 +#define MUX_IGNORE_TOP_MFC 0x0504 +#define MUX_IGNORE_TOP_G2D 0x0508 +#define MUX_IGNORE_TOP_GSCL 0x050c +#define MUX_IGNORE_TOP_ISP10 0x0514 +#define MUX_IGNORE_TOP_ISP11 0x0518 +#define MUX_IGNORE_TOP_DISP0 0x051c +#define MUX_IGNORE_TOP_DISP1 0x0520 +#define MUX_IGNORE_TOP_BUS 0x0524 +#define MUX_IGNORE_TOP_PERI0 0x0528 +#define MUX_IGNORE_TOP_PERI1 0x052c +#define MUX_IGNORE_TOP_FSYS 0x0530 +#define DIV_TOP_G2D_MFC 0x0600 +#define DIV_TOP_GSCL_ISP0 0x0604 +#define DIV_TOP_ISP10 0x0608 +#define DIV_TOP_ISP11 0x060c +#define DIV_TOP_DISP 0x0610 +#define DIV_TOP_BUS 0x0614 +#define DIV_TOP_PERI0 0x0618 +#define DIV_TOP_PERI1 0x061c +#define DIV_TOP_PERI2 0x0620 +#define DIV_TOP_FSYS0 0x0624 +#define DIV_TOP_FSYS1 0x0628 +#define DIV_TOP_HPM 0x062c +#define DIV_TOP_PLL_FDET 0x0630 +#define DIV_STAT_TOP_G2D_MFC 0x0700 +#define DIV_STAT_TOP_GSCL_ISP0 0x0704 +#define DIV_STAT_TOP_ISP10 0x0708 +#define DIV_STAT_TOP_ISP11 0x070c +#define DIV_STAT_TOP_DISP 0x0710 +#define DIV_STAT_TOP_BUS 0x0714 +#define DIV_STAT_TOP_PERI0 0x0718 +#define DIV_STAT_TOP_PERI1 0x071c +#define DIV_STAT_TOP_PERI2 0x0720 +#define DIV_STAT_TOP_FSYS0 0x0724 +#define DIV_STAT_TOP_FSYS1 0x0728 +#define DIV_STAT_TOP_HPM 0x072c +#define DIV_STAT_TOP_PLL_FDET 0x0730 +#define EN_ACLK_TOP 0x0800 +#define EN_SCLK_TOP 0x0a00 +#define EN_IP_TOP 0x0b00 +#define CLKOUT_CMU_TOP 0x0c00 +#define CLKOUT_CMU_TOP_DIV_STAT 0x0c04 + +#endif /*__CLK_EXYNOS5260_H */ + diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c index 60b26819bed5..9d7d7eed03fd 100644 --- a/drivers/clk/samsung/clk-exynos5420.c +++ b/drivers/clk/samsung/clk-exynos5420.c @@ -27,18 +27,24 @@ #define DIV_CPU1 0x504 #define GATE_BUS_CPU 0x700 #define GATE_SCLK_CPU 0x800 +#define CLKOUT_CMU_CPU 0xa00 +#define GATE_IP_G2D 0x8800 #define CPLL_LOCK 0x10020 #define DPLL_LOCK 0x10030 #define EPLL_LOCK 0x10040 #define RPLL_LOCK 0x10050 #define IPLL_LOCK 0x10060 #define SPLL_LOCK 0x10070 -#define VPLL_LOCK 0x10070 +#define VPLL_LOCK 0x10080 #define MPLL_LOCK 0x10090 #define CPLL_CON0 0x10120 #define DPLL_CON0 0x10128 #define EPLL_CON0 0x10130 +#define EPLL_CON1 0x10134 +#define EPLL_CON2 0x10138 #define RPLL_CON0 0x10140 +#define RPLL_CON1 0x10144 +#define RPLL_CON2 0x10148 #define IPLL_CON0 0x10150 #define SPLL_CON0 0x10160 #define VPLL_CON0 0x10170 @@ -51,21 +57,31 @@ #define SRC_TOP5 0x10214 #define SRC_TOP6 0x10218 #define SRC_TOP7 0x1021c +#define SRC_TOP8 0x10220 /* 5800 specific */ +#define SRC_TOP9 0x10224 /* 5800 specific */ #define SRC_DISP10 0x1022c #define SRC_MAU 0x10240 #define SRC_FSYS 0x10244 #define SRC_PERIC0 0x10250 #define SRC_PERIC1 0x10254 +#define SRC_ISP 0x10270 +#define SRC_CAM 0x10274 /* 5800 specific */ #define SRC_TOP10 0x10280 #define SRC_TOP11 0x10284 #define SRC_TOP12 0x10288 -#define SRC_MASK_DISP10 0x1032c +#define SRC_TOP13 0x1028c /* 5800 specific */ +#define SRC_MASK_TOP2 0x10308 +#define SRC_MASK_TOP7 0x1031c +#define SRC_MASK_DISP10 0x1032c +#define SRC_MASK_MAU 0x10334 #define SRC_MASK_FSYS 0x10340 #define SRC_MASK_PERIC0 0x10350 #define SRC_MASK_PERIC1 0x10354 #define DIV_TOP0 0x10500 #define DIV_TOP1 0x10504 #define DIV_TOP2 0x10508 +#define DIV_TOP8 0x10520 /* 5800 specific */ +#define DIV_TOP9 0x10524 /* 5800 specific */ #define DIV_DISP10 0x1052c #define DIV_MAU 0x10544 #define DIV_FSYS0 0x10548 @@ -76,54 +92,82 @@ #define DIV_PERIC2 0x10560 #define DIV_PERIC3 0x10564 #define DIV_PERIC4 0x10568 +#define DIV_CAM 0x10574 /* 5800 specific */ +#define SCLK_DIV_ISP0 0x10580 +#define SCLK_DIV_ISP1 0x10584 +#define DIV2_RATIO0 0x10590 +#define DIV4_RATIO 0x105a0 #define GATE_BUS_TOP 0x10700 +#define GATE_BUS_GEN 0x1073c #define GATE_BUS_FSYS0 0x10740 +#define GATE_BUS_FSYS2 0x10748 #define GATE_BUS_PERIC 0x10750 #define GATE_BUS_PERIC1 0x10754 #define GATE_BUS_PERIS0 0x10760 #define GATE_BUS_PERIS1 0x10764 +#define GATE_BUS_NOC 0x10770 +#define GATE_TOP_SCLK_ISP 0x10870 #define GATE_IP_GSCL0 0x10910 #define GATE_IP_GSCL1 0x10920 +#define GATE_IP_CAM 0x10924 /* 5800 specific */ #define GATE_IP_MFC 0x1092c #define GATE_IP_DISP1 0x10928 #define GATE_IP_G3D 0x10930 #define GATE_IP_GEN 0x10934 +#define GATE_IP_FSYS 0x10944 +#define GATE_IP_PERIC 0x10950 +#define GATE_IP_PERIS 0x10960 #define GATE_IP_MSCL 0x10970 #define GATE_TOP_SCLK_GSCL 0x10820 #define GATE_TOP_SCLK_DISP1 0x10828 #define GATE_TOP_SCLK_MAU 0x1083c #define GATE_TOP_SCLK_FSYS 0x10840 #define GATE_TOP_SCLK_PERIC 0x10850 +#define TOP_SPARE2 0x10b08 #define BPLL_LOCK 0x20010 #define BPLL_CON0 0x20110 -#define SRC_CDREX 0x20200 #define KPLL_LOCK 0x28000 #define KPLL_CON0 0x28100 #define SRC_KFC 0x28200 #define DIV_KFC0 0x28500 +/* Exynos5x SoC type */ +enum exynos5x_soc { + EXYNOS5420, + EXYNOS5800, +}; + /* list of PLLs */ -enum exynos5420_plls { +enum exynos5x_plls { apll, cpll, dpll, epll, rpll, ipll, spll, vpll, mpll, bpll, kpll, nr_plls /* number of PLLs */ }; static void __iomem *reg_base; +static enum exynos5x_soc exynos5x_soc; #ifdef CONFIG_PM_SLEEP -static struct samsung_clk_reg_dump *exynos5420_save; +static struct samsung_clk_reg_dump *exynos5x_save; +static struct samsung_clk_reg_dump *exynos5800_save; /* * list of controller registers to be saved and restored during a * suspend/resume cycle. */ -static unsigned long exynos5420_clk_regs[] __initdata = { +static unsigned long exynos5x_clk_regs[] __initdata = { SRC_CPU, DIV_CPU0, DIV_CPU1, GATE_BUS_CPU, GATE_SCLK_CPU, + CLKOUT_CMU_CPU, + EPLL_CON0, + EPLL_CON1, + EPLL_CON2, + RPLL_CON0, + RPLL_CON1, + RPLL_CON2, SRC_TOP0, SRC_TOP1, SRC_TOP2, @@ -140,10 +184,13 @@ static unsigned long exynos5420_clk_regs[] __initdata = { SRC_TOP10, SRC_TOP11, SRC_TOP12, + SRC_MASK_TOP2, + SRC_MASK_TOP7, SRC_MASK_DISP10, SRC_MASK_FSYS, SRC_MASK_PERIC0, SRC_MASK_PERIC1, + SRC_ISP, DIV_TOP0, DIV_TOP1, DIV_TOP2, @@ -157,41 +204,71 @@ static unsigned long exynos5420_clk_regs[] __initdata = { DIV_PERIC2, DIV_PERIC3, DIV_PERIC4, + SCLK_DIV_ISP0, + SCLK_DIV_ISP1, + DIV2_RATIO0, + DIV4_RATIO, GATE_BUS_TOP, + GATE_BUS_GEN, GATE_BUS_FSYS0, + GATE_BUS_FSYS2, GATE_BUS_PERIC, GATE_BUS_PERIC1, GATE_BUS_PERIS0, GATE_BUS_PERIS1, + GATE_BUS_NOC, + GATE_TOP_SCLK_ISP, GATE_IP_GSCL0, GATE_IP_GSCL1, GATE_IP_MFC, GATE_IP_DISP1, GATE_IP_G3D, GATE_IP_GEN, + GATE_IP_FSYS, + GATE_IP_PERIC, + GATE_IP_PERIS, GATE_IP_MSCL, GATE_TOP_SCLK_GSCL, GATE_TOP_SCLK_DISP1, GATE_TOP_SCLK_MAU, GATE_TOP_SCLK_FSYS, GATE_TOP_SCLK_PERIC, - SRC_CDREX, + TOP_SPARE2, SRC_KFC, DIV_KFC0, }; +static unsigned long exynos5800_clk_regs[] __initdata = { + SRC_TOP8, + SRC_TOP9, + SRC_CAM, + SRC_TOP1, + DIV_TOP8, + DIV_TOP9, + DIV_CAM, + GATE_IP_CAM, +}; + static int exynos5420_clk_suspend(void) { - samsung_clk_save(reg_base, exynos5420_save, - ARRAY_SIZE(exynos5420_clk_regs)); + samsung_clk_save(reg_base, exynos5x_save, + ARRAY_SIZE(exynos5x_clk_regs)); + + if (exynos5x_soc == EXYNOS5800) + samsung_clk_save(reg_base, exynos5800_save, + ARRAY_SIZE(exynos5800_clk_regs)); return 0; } static void exynos5420_clk_resume(void) { - samsung_clk_restore(reg_base, exynos5420_save, - ARRAY_SIZE(exynos5420_clk_regs)); + samsung_clk_restore(reg_base, exynos5x_save, + ARRAY_SIZE(exynos5x_clk_regs)); + + if (exynos5x_soc == EXYNOS5800) + samsung_clk_restore(reg_base, exynos5800_save, + ARRAY_SIZE(exynos5800_clk_regs)); } static struct syscore_ops exynos5420_clk_syscore_ops = { @@ -201,108 +278,183 @@ static struct syscore_ops exynos5420_clk_syscore_ops = { static void exynos5420_clk_sleep_init(void) { - exynos5420_save = samsung_clk_alloc_reg_dump(exynos5420_clk_regs, - ARRAY_SIZE(exynos5420_clk_regs)); - if (!exynos5420_save) { + exynos5x_save = samsung_clk_alloc_reg_dump(exynos5x_clk_regs, + ARRAY_SIZE(exynos5x_clk_regs)); + if (!exynos5x_save) { pr_warn("%s: failed to allocate sleep save data, no sleep support!\n", __func__); return; } + if (exynos5x_soc == EXYNOS5800) { + exynos5800_save = + samsung_clk_alloc_reg_dump(exynos5800_clk_regs, + ARRAY_SIZE(exynos5800_clk_regs)); + if (!exynos5800_save) + goto err_soc; + } + register_syscore_ops(&exynos5420_clk_syscore_ops); + return; +err_soc: + kfree(exynos5x_save); + pr_warn("%s: failed to allocate sleep save data, no sleep support!\n", + __func__); + return; } #else static void exynos5420_clk_sleep_init(void) {} #endif /* list of all parent clocks */ -PNAME(mspll_cpu_p) = { "sclk_cpll", "sclk_dpll", - "sclk_mpll", "sclk_spll" }; -PNAME(cpu_p) = { "mout_apll" , "mout_mspll_cpu" }; -PNAME(kfc_p) = { "mout_kpll" , "mout_mspll_kfc" }; -PNAME(apll_p) = { "fin_pll", "fout_apll", }; -PNAME(bpll_p) = { "fin_pll", "fout_bpll", }; -PNAME(cpll_p) = { "fin_pll", "fout_cpll", }; -PNAME(dpll_p) = { "fin_pll", "fout_dpll", }; -PNAME(epll_p) = { "fin_pll", "fout_epll", }; -PNAME(ipll_p) = { "fin_pll", "fout_ipll", }; -PNAME(kpll_p) = { "fin_pll", "fout_kpll", }; -PNAME(mpll_p) = { "fin_pll", "fout_mpll", }; -PNAME(rpll_p) = { "fin_pll", "fout_rpll", }; -PNAME(spll_p) = { "fin_pll", "fout_spll", }; -PNAME(vpll_p) = { "fin_pll", "fout_vpll", }; - -PNAME(group1_p) = { "sclk_cpll", "sclk_dpll", "sclk_mpll" }; -PNAME(group2_p) = { "fin_pll", "sclk_cpll", "sclk_dpll", "sclk_mpll", - "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" }; -PNAME(group3_p) = { "sclk_rpll", "sclk_spll" }; -PNAME(group4_p) = { "sclk_ipll", "sclk_dpll", "sclk_mpll" }; -PNAME(group5_p) = { "sclk_vpll", "sclk_dpll" }; - -PNAME(sw_aclk66_p) = { "dout_aclk66", "sclk_spll" }; -PNAME(aclk66_peric_p) = { "fin_pll", "mout_sw_aclk66" }; - -PNAME(sw_aclk200_fsys_p) = { "dout_aclk200_fsys", "sclk_spll"}; -PNAME(user_aclk200_fsys_p) = { "fin_pll", "mout_sw_aclk200_fsys" }; - -PNAME(sw_aclk200_fsys2_p) = { "dout_aclk200_fsys2", "sclk_spll"}; -PNAME(user_aclk200_fsys2_p) = { "fin_pll", "mout_sw_aclk200_fsys2" }; - -PNAME(sw_aclk200_p) = { "dout_aclk200", "sclk_spll"}; -PNAME(aclk200_disp1_p) = { "fin_pll", "mout_sw_aclk200" }; - -PNAME(sw_aclk400_mscl_p) = { "dout_aclk400_mscl", "sclk_spll"}; -PNAME(user_aclk400_mscl_p) = { "fin_pll", "mout_sw_aclk400_mscl" }; - -PNAME(sw_aclk333_p) = { "dout_aclk333", "sclk_spll"}; -PNAME(user_aclk333_p) = { "fin_pll", "mout_sw_aclk333" }; - -PNAME(sw_aclk166_p) = { "dout_aclk166", "sclk_spll"}; -PNAME(user_aclk166_p) = { "fin_pll", "mout_sw_aclk166" }; - -PNAME(sw_aclk266_p) = { "dout_aclk266", "sclk_spll"}; -PNAME(user_aclk266_p) = { "fin_pll", "mout_sw_aclk266" }; - -PNAME(sw_aclk333_432_gscl_p) = { "dout_aclk333_432_gscl", "sclk_spll"}; -PNAME(user_aclk333_432_gscl_p) = { "fin_pll", "mout_sw_aclk333_432_gscl" }; - -PNAME(sw_aclk300_gscl_p) = { "dout_aclk300_gscl", "sclk_spll"}; -PNAME(user_aclk300_gscl_p) = { "fin_pll", "mout_sw_aclk300_gscl" }; - -PNAME(sw_aclk300_disp1_p) = { "dout_aclk300_disp1", "sclk_spll"}; -PNAME(user_aclk300_disp1_p) = { "fin_pll", "mout_sw_aclk300_disp1" }; - -PNAME(sw_aclk300_jpeg_p) = { "dout_aclk300_jpeg", "sclk_spll"}; -PNAME(user_aclk300_jpeg_p) = { "fin_pll", "mout_sw_aclk300_jpeg" }; - -PNAME(sw_aclk_g3d_p) = { "dout_aclk_g3d", "sclk_spll"}; -PNAME(user_aclk_g3d_p) = { "fin_pll", "mout_sw_aclk_g3d" }; - -PNAME(sw_aclk266_g2d_p) = { "dout_aclk266_g2d", "sclk_spll"}; -PNAME(user_aclk266_g2d_p) = { "fin_pll", "mout_sw_aclk266_g2d" }; - -PNAME(sw_aclk333_g2d_p) = { "dout_aclk333_g2d", "sclk_spll"}; -PNAME(user_aclk333_g2d_p) = { "fin_pll", "mout_sw_aclk333_g2d" }; - -PNAME(audio0_p) = { "fin_pll", "cdclk0", "sclk_dpll", "sclk_mpll", - "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" }; -PNAME(audio1_p) = { "fin_pll", "cdclk1", "sclk_dpll", "sclk_mpll", - "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" }; -PNAME(audio2_p) = { "fin_pll", "cdclk2", "sclk_dpll", "sclk_mpll", - "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" }; -PNAME(spdif_p) = { "fin_pll", "dout_audio0", "dout_audio1", "dout_audio2", - "spdif_extclk", "sclk_ipll", "sclk_epll", "sclk_rpll" }; -PNAME(hdmi_p) = { "dout_hdmi_pixel", "sclk_hdmiphy" }; -PNAME(maudio0_p) = { "fin_pll", "maudio_clk", "sclk_dpll", "sclk_mpll", - "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" }; +PNAME(mout_mspll_cpu_p) = {"mout_sclk_cpll", "mout_sclk_dpll", + "mout_sclk_mpll", "mout_sclk_spll"}; +PNAME(mout_cpu_p) = {"mout_apll" , "mout_mspll_cpu"}; +PNAME(mout_kfc_p) = {"mout_kpll" , "mout_mspll_kfc"}; +PNAME(mout_apll_p) = {"fin_pll", "fout_apll"}; +PNAME(mout_bpll_p) = {"fin_pll", "fout_bpll"}; +PNAME(mout_cpll_p) = {"fin_pll", "fout_cpll"}; +PNAME(mout_dpll_p) = {"fin_pll", "fout_dpll"}; +PNAME(mout_epll_p) = {"fin_pll", "fout_epll"}; +PNAME(mout_ipll_p) = {"fin_pll", "fout_ipll"}; +PNAME(mout_kpll_p) = {"fin_pll", "fout_kpll"}; +PNAME(mout_mpll_p) = {"fin_pll", "fout_mpll"}; +PNAME(mout_rpll_p) = {"fin_pll", "fout_rpll"}; +PNAME(mout_spll_p) = {"fin_pll", "fout_spll"}; +PNAME(mout_vpll_p) = {"fin_pll", "fout_vpll"}; + +PNAME(mout_group1_p) = {"mout_sclk_cpll", "mout_sclk_dpll", + "mout_sclk_mpll"}; +PNAME(mout_group2_p) = {"fin_pll", "mout_sclk_cpll", + "mout_sclk_dpll", "mout_sclk_mpll", "mout_sclk_spll", + "mout_sclk_ipll", "mout_sclk_epll", "mout_sclk_rpll"}; +PNAME(mout_group3_p) = {"mout_sclk_rpll", "mout_sclk_spll"}; +PNAME(mout_group4_p) = {"mout_sclk_ipll", "mout_sclk_dpll", "mout_sclk_mpll"}; +PNAME(mout_group5_p) = {"mout_sclk_vpll", "mout_sclk_dpll"}; + +PNAME(mout_fimd1_final_p) = {"mout_fimd1", "mout_fimd1_opt"}; +PNAME(mout_sw_aclk66_p) = {"dout_aclk66", "mout_sclk_spll"}; +PNAME(mout_user_aclk66_peric_p) = { "fin_pll", "mout_sw_aclk66"}; +PNAME(mout_user_pclk66_gpio_p) = {"mout_sw_aclk66", "ff_sw_aclk66"}; + +PNAME(mout_sw_aclk200_fsys_p) = {"dout_aclk200_fsys", "mout_sclk_spll"}; +PNAME(mout_sw_pclk200_fsys_p) = {"dout_pclk200_fsys", "mout_sclk_spll"}; +PNAME(mout_user_pclk200_fsys_p) = {"fin_pll", "mout_sw_pclk200_fsys"}; +PNAME(mout_user_aclk200_fsys_p) = {"fin_pll", "mout_sw_aclk200_fsys"}; + +PNAME(mout_sw_aclk200_fsys2_p) = {"dout_aclk200_fsys2", "mout_sclk_spll"}; +PNAME(mout_user_aclk200_fsys2_p) = {"fin_pll", "mout_sw_aclk200_fsys2"}; +PNAME(mout_sw_aclk100_noc_p) = {"dout_aclk100_noc", "mout_sclk_spll"}; +PNAME(mout_user_aclk100_noc_p) = {"fin_pll", "mout_sw_aclk100_noc"}; + +PNAME(mout_sw_aclk400_wcore_p) = {"dout_aclk400_wcore", "mout_sclk_spll"}; +PNAME(mout_aclk400_wcore_bpll_p) = {"mout_aclk400_wcore", "sclk_bpll"}; +PNAME(mout_user_aclk400_wcore_p) = {"fin_pll", "mout_sw_aclk400_wcore"}; + +PNAME(mout_sw_aclk400_isp_p) = {"dout_aclk400_isp", "mout_sclk_spll"}; +PNAME(mout_user_aclk400_isp_p) = {"fin_pll", "mout_sw_aclk400_isp"}; + +PNAME(mout_sw_aclk333_432_isp0_p) = {"dout_aclk333_432_isp0", + "mout_sclk_spll"}; +PNAME(mout_user_aclk333_432_isp0_p) = {"fin_pll", "mout_sw_aclk333_432_isp0"}; + +PNAME(mout_sw_aclk333_432_isp_p) = {"dout_aclk333_432_isp", "mout_sclk_spll"}; +PNAME(mout_user_aclk333_432_isp_p) = {"fin_pll", "mout_sw_aclk333_432_isp"}; + +PNAME(mout_sw_aclk200_p) = {"dout_aclk200", "mout_sclk_spll"}; +PNAME(mout_user_aclk200_disp1_p) = {"fin_pll", "mout_sw_aclk200"}; + +PNAME(mout_sw_aclk400_mscl_p) = {"dout_aclk400_mscl", "mout_sclk_spll"}; +PNAME(mout_user_aclk400_mscl_p) = {"fin_pll", "mout_sw_aclk400_mscl"}; + +PNAME(mout_sw_aclk333_p) = {"dout_aclk333", "mout_sclk_spll"}; +PNAME(mout_user_aclk333_p) = {"fin_pll", "mout_sw_aclk333"}; + +PNAME(mout_sw_aclk166_p) = {"dout_aclk166", "mout_sclk_spll"}; +PNAME(mout_user_aclk166_p) = {"fin_pll", "mout_sw_aclk166"}; + +PNAME(mout_sw_aclk266_p) = {"dout_aclk266", "mout_sclk_spll"}; +PNAME(mout_user_aclk266_p) = {"fin_pll", "mout_sw_aclk266"}; +PNAME(mout_user_aclk266_isp_p) = {"fin_pll", "mout_sw_aclk266"}; + +PNAME(mout_sw_aclk333_432_gscl_p) = {"dout_aclk333_432_gscl", "mout_sclk_spll"}; +PNAME(mout_user_aclk333_432_gscl_p) = {"fin_pll", "mout_sw_aclk333_432_gscl"}; + +PNAME(mout_sw_aclk300_gscl_p) = {"dout_aclk300_gscl", "mout_sclk_spll"}; +PNAME(mout_user_aclk300_gscl_p) = {"fin_pll", "mout_sw_aclk300_gscl"}; + +PNAME(mout_sw_aclk300_disp1_p) = {"dout_aclk300_disp1", "mout_sclk_spll"}; +PNAME(mout_sw_aclk400_disp1_p) = {"dout_aclk400_disp1", "mout_sclk_spll"}; +PNAME(mout_user_aclk300_disp1_p) = {"fin_pll", "mout_sw_aclk300_disp1"}; +PNAME(mout_user_aclk400_disp1_p) = {"fin_pll", "mout_sw_aclk400_disp1"}; + +PNAME(mout_sw_aclk300_jpeg_p) = {"dout_aclk300_jpeg", "mout_sclk_spll"}; +PNAME(mout_user_aclk300_jpeg_p) = {"fin_pll", "mout_sw_aclk300_jpeg"}; + +PNAME(mout_sw_aclk_g3d_p) = {"dout_aclk_g3d", "mout_sclk_spll"}; +PNAME(mout_user_aclk_g3d_p) = {"fin_pll", "mout_sw_aclk_g3d"}; + +PNAME(mout_sw_aclk266_g2d_p) = {"dout_aclk266_g2d", "mout_sclk_spll"}; +PNAME(mout_user_aclk266_g2d_p) = {"fin_pll", "mout_sw_aclk266_g2d"}; + +PNAME(mout_sw_aclk333_g2d_p) = {"dout_aclk333_g2d", "mout_sclk_spll"}; +PNAME(mout_user_aclk333_g2d_p) = {"fin_pll", "mout_sw_aclk333_g2d"}; + +PNAME(mout_audio0_p) = {"fin_pll", "cdclk0", "mout_sclk_dpll", + "mout_sclk_mpll", "mout_sclk_spll", "mout_sclk_ipll", + "mout_sclk_epll", "mout_sclk_rpll"}; +PNAME(mout_audio1_p) = {"fin_pll", "cdclk1", "mout_sclk_dpll", + "mout_sclk_mpll", "mout_sclk_spll", "mout_sclk_ipll", + "mout_sclk_epll", "mout_sclk_rpll"}; +PNAME(mout_audio2_p) = {"fin_pll", "cdclk2", "mout_sclk_dpll", + "mout_sclk_mpll", "mout_sclk_spll", "mout_sclk_ipll", + "mout_sclk_epll", "mout_sclk_rpll"}; +PNAME(mout_spdif_p) = {"fin_pll", "dout_audio0", "dout_audio1", + "dout_audio2", "spdif_extclk", "mout_sclk_ipll", + "mout_sclk_epll", "mout_sclk_rpll"}; +PNAME(mout_hdmi_p) = {"dout_hdmi_pixel", "sclk_hdmiphy"}; +PNAME(mout_maudio0_p) = {"fin_pll", "maudio_clk", "mout_sclk_dpll", + "mout_sclk_mpll", "mout_sclk_spll", "mout_sclk_ipll", + "mout_sclk_epll", "mout_sclk_rpll"}; +PNAME(mout_mau_epll_clk_p) = {"mout_sclk_epll", "mout_sclk_dpll", + "mout_sclk_mpll", "mout_sclk_spll"}; +/* List of parents specific to exynos5800 */ +PNAME(mout_epll2_5800_p) = { "mout_sclk_epll", "ff_dout_epll2" }; +PNAME(mout_group1_5800_p) = { "mout_sclk_cpll", "mout_sclk_dpll", + "mout_sclk_mpll", "ff_dout_spll2" }; +PNAME(mout_group2_5800_p) = { "mout_sclk_cpll", "mout_sclk_dpll", + "mout_sclk_mpll", "ff_dout_spll2", + "mout_epll2", "mout_sclk_ipll" }; +PNAME(mout_group3_5800_p) = { "mout_sclk_cpll", "mout_sclk_dpll", + "mout_sclk_mpll", "ff_dout_spll2", + "mout_epll2" }; +PNAME(mout_group5_5800_p) = { "mout_sclk_cpll", "mout_sclk_dpll", + "mout_sclk_mpll", "mout_sclk_spll" }; +PNAME(mout_group6_5800_p) = { "mout_sclk_ipll", "mout_sclk_dpll", + "mout_sclk_mpll", "ff_dout_spll2" }; +PNAME(mout_group7_5800_p) = { "mout_sclk_cpll", "mout_sclk_dpll", + "mout_sclk_mpll", "mout_sclk_spll", + "mout_epll2", "mout_sclk_ipll" }; +PNAME(mout_mau_epll_clk_5800_p) = { "mout_sclk_epll", "mout_sclk_dpll", + "mout_sclk_mpll", + "ff_dout_spll2" }; +PNAME(mout_group8_5800_p) = { "dout_aclk432_scaler", "dout_sclk_sw" }; +PNAME(mout_group9_5800_p) = { "dout_osc_div", "mout_sw_aclk432_scaler" }; +PNAME(mout_group10_5800_p) = { "dout_aclk432_cam", "dout_sclk_sw" }; +PNAME(mout_group11_5800_p) = { "dout_osc_div", "mout_sw_aclk432_cam" }; +PNAME(mout_group12_5800_p) = { "dout_aclkfl1_550_cam", "dout_sclk_sw" }; +PNAME(mout_group13_5800_p) = { "dout_osc_div", "mout_sw_aclkfl1_550_cam" }; +PNAME(mout_group14_5800_p) = { "dout_aclk550_cam", "dout_sclk_sw" }; +PNAME(mout_group15_5800_p) = { "dout_osc_div", "mout_sw_aclk550_cam" }; /* fixed rate clocks generated outside the soc */ -static struct samsung_fixed_rate_clock exynos5420_fixed_rate_ext_clks[] __initdata = { +static struct samsung_fixed_rate_clock + exynos5x_fixed_rate_ext_clks[] __initdata = { FRATE(CLK_FIN_PLL, "fin_pll", NULL, CLK_IS_ROOT, 0), }; /* fixed rate clocks generated inside the soc */ -static struct samsung_fixed_rate_clock exynos5420_fixed_rate_clks[] __initdata = { +static struct samsung_fixed_rate_clock exynos5x_fixed_rate_clks[] __initdata = { FRATE(CLK_SCLK_HDMIPHY, "sclk_hdmiphy", NULL, CLK_IS_ROOT, 24000000), FRATE(0, "sclk_pwi", NULL, CLK_IS_ROOT, 24000000), FRATE(0, "sclk_usbh20", NULL, CLK_IS_ROOT, 48000000), @@ -310,146 +462,309 @@ static struct samsung_fixed_rate_clock exynos5420_fixed_rate_clks[] __initdata = FRATE(0, "sclk_usbh20_scan_clk", NULL, CLK_IS_ROOT, 480000000), }; -static struct samsung_fixed_factor_clock exynos5420_fixed_factor_clks[] __initdata = { - FFACTOR(0, "sclk_hsic_12m", "fin_pll", 1, 2, 0), +static struct samsung_fixed_factor_clock + exynos5x_fixed_factor_clks[] __initdata = { + FFACTOR(0, "ff_hsic_12m", "fin_pll", 1, 2, 0), + FFACTOR(0, "ff_sw_aclk66", "mout_sw_aclk66", 1, 2, 0), }; -static struct samsung_mux_clock exynos5420_mux_clks[] __initdata = { - MUX(0, "mout_mspll_kfc", mspll_cpu_p, SRC_TOP7, 8, 2), - MUX(0, "mout_mspll_cpu", mspll_cpu_p, SRC_TOP7, 12, 2), - MUX(0, "mout_apll", apll_p, SRC_CPU, 0, 1), - MUX(0, "mout_cpu", cpu_p, SRC_CPU, 16, 1), - MUX(0, "mout_kpll", kpll_p, SRC_KFC, 0, 1), - MUX(0, "mout_cpu_kfc", kfc_p, SRC_KFC, 16, 1), - - MUX(0, "sclk_bpll", bpll_p, SRC_CDREX, 0, 1), - - MUX_A(0, "mout_aclk400_mscl", group1_p, - SRC_TOP0, 4, 2, "aclk400_mscl"), - MUX(0, "mout_aclk200", group1_p, SRC_TOP0, 8, 2), - MUX(0, "mout_aclk200_fsys2", group1_p, SRC_TOP0, 12, 2), - MUX(0, "mout_aclk200_fsys", group1_p, SRC_TOP0, 28, 2), - - MUX(0, "mout_aclk333_432_gscl", group4_p, SRC_TOP1, 0, 2), - MUX(0, "mout_aclk66", group1_p, SRC_TOP1, 8, 2), - MUX(0, "mout_aclk266", group1_p, SRC_TOP1, 20, 2), - MUX(0, "mout_aclk166", group1_p, SRC_TOP1, 24, 2), - MUX(0, "mout_aclk333", group1_p, SRC_TOP1, 28, 2), - - MUX(0, "mout_aclk333_g2d", group1_p, SRC_TOP2, 8, 2), - MUX(0, "mout_aclk266_g2d", group1_p, SRC_TOP2, 12, 2), - MUX(0, "mout_aclk_g3d", group5_p, SRC_TOP2, 16, 1), - MUX(0, "mout_aclk300_jpeg", group1_p, SRC_TOP2, 20, 2), - MUX(0, "mout_aclk300_disp1", group1_p, SRC_TOP2, 24, 2), - MUX(0, "mout_aclk300_gscl", group1_p, SRC_TOP2, 28, 2), - - MUX(0, "mout_user_aclk400_mscl", user_aclk400_mscl_p, +static struct samsung_fixed_factor_clock + exynos5800_fixed_factor_clks[] __initdata = { + FFACTOR(0, "ff_dout_epll2", "mout_sclk_epll", 1, 2, 0), + FFACTOR(0, "ff_dout_spll2", "mout_sclk_spll", 1, 2, 0), +}; + +struct samsung_mux_clock exynos5800_mux_clks[] __initdata = { + MUX(0, "mout_aclk400_isp", mout_group3_5800_p, SRC_TOP0, 0, 3), + MUX(0, "mout_aclk400_mscl", mout_group3_5800_p, SRC_TOP0, 4, 3), + MUX(0, "mout_aclk400_wcore", mout_group2_5800_p, SRC_TOP0, 16, 3), + MUX(0, "mout_aclk100_noc", mout_group1_5800_p, SRC_TOP0, 20, 2), + + MUX(0, "mout_aclk333_432_gscl", mout_group6_5800_p, SRC_TOP1, 0, 2), + MUX(0, "mout_aclk333_432_isp", mout_group6_5800_p, SRC_TOP1, 4, 2), + MUX(0, "mout_aclk333_432_isp0", mout_group6_5800_p, SRC_TOP1, 12, 2), + MUX(0, "mout_aclk266", mout_group5_5800_p, SRC_TOP1, 20, 2), + MUX(0, "mout_aclk333", mout_group1_5800_p, SRC_TOP1, 28, 2), + + MUX(0, "mout_aclk400_disp1", mout_group7_5800_p, SRC_TOP2, 4, 3), + MUX(0, "mout_aclk333_g2d", mout_group5_5800_p, SRC_TOP2, 8, 2), + MUX(0, "mout_aclk266_g2d", mout_group5_5800_p, SRC_TOP2, 12, 2), + MUX(0, "mout_aclk300_jpeg", mout_group5_5800_p, SRC_TOP2, 20, 2), + MUX(0, "mout_aclk300_disp1", mout_group5_5800_p, SRC_TOP2, 24, 2), + MUX(0, "mout_aclk300_gscl", mout_group5_5800_p, SRC_TOP2, 28, 2), + + MUX(0, "mout_mau_epll_clk", mout_mau_epll_clk_5800_p, SRC_TOP7, + 20, 2), + MUX(0, "sclk_bpll", mout_bpll_p, SRC_TOP7, 24, 1), + MUX(0, "mout_epll2", mout_epll2_5800_p, SRC_TOP7, 28, 1), + + MUX(0, "mout_aclk550_cam", mout_group3_5800_p, SRC_TOP8, 16, 3), + MUX(0, "mout_aclkfl1_550_cam", mout_group3_5800_p, SRC_TOP8, 20, 3), + MUX(0, "mout_aclk432_cam", mout_group6_5800_p, SRC_TOP8, 24, 2), + MUX(0, "mout_aclk432_scaler", mout_group6_5800_p, SRC_TOP8, 28, 2), + + MUX(0, "mout_user_aclk550_cam", mout_group15_5800_p, + SRC_TOP9, 16, 1), + MUX(0, "mout_user_aclkfl1_550_cam", mout_group13_5800_p, + SRC_TOP9, 20, 1), + MUX(0, "mout_user_aclk432_cam", mout_group11_5800_p, + SRC_TOP9, 24, 1), + MUX(0, "mout_user_aclk432_scaler", mout_group9_5800_p, + SRC_TOP9, 28, 1), + + MUX(0, "mout_sw_aclk550_cam", mout_group14_5800_p, SRC_TOP13, 16, 1), + MUX(0, "mout_sw_aclkfl1_550_cam", mout_group12_5800_p, + SRC_TOP13, 20, 1), + MUX(0, "mout_sw_aclk432_cam", mout_group10_5800_p, + SRC_TOP13, 24, 1), + MUX(0, "mout_sw_aclk432_scaler", mout_group8_5800_p, + SRC_TOP13, 28, 1), + + MUX(0, "mout_fimd1", mout_group2_p, SRC_DISP10, 4, 3), +}; + +struct samsung_div_clock exynos5800_div_clks[] __initdata = { + DIV(0, "dout_aclk400_wcore", "mout_aclk400_wcore", DIV_TOP0, 16, 3), + + DIV(0, "dout_aclk550_cam", "mout_aclk550_cam", + DIV_TOP8, 16, 3), + DIV(0, "dout_aclkfl1_550_cam", "mout_aclkfl1_550_cam", + DIV_TOP8, 20, 3), + DIV(0, "dout_aclk432_cam", "mout_aclk432_cam", + DIV_TOP8, 24, 3), + DIV(0, "dout_aclk432_scaler", "mout_aclk432_scaler", + DIV_TOP8, 28, 3), + + DIV(0, "dout_osc_div", "fin_pll", DIV_TOP9, 20, 3), + DIV(0, "dout_sclk_sw", "sclk_spll", DIV_TOP9, 24, 6), +}; + +struct samsung_gate_clock exynos5800_gate_clks[] __initdata = { + GATE(CLK_ACLK550_CAM, "aclk550_cam", "mout_user_aclk550_cam", + GATE_BUS_TOP, 24, 0, 0), + GATE(CLK_ACLK432_SCALER, "aclk432_scaler", "mout_user_aclk432_scaler", + GATE_BUS_TOP, 27, 0, 0), +}; + +struct samsung_mux_clock exynos5420_mux_clks[] __initdata = { + MUX(0, "sclk_bpll", mout_bpll_p, TOP_SPARE2, 0, 1), + MUX(0, "mout_aclk400_wcore_bpll", mout_aclk400_wcore_bpll_p, + TOP_SPARE2, 4, 1), + + MUX(0, "mout_aclk400_isp", mout_group1_p, SRC_TOP0, 0, 2), + MUX_A(0, "mout_aclk400_mscl", mout_group1_p, + SRC_TOP0, 4, 2, "aclk400_mscl"), + MUX(0, "mout_aclk400_wcore", mout_group1_p, SRC_TOP0, 16, 2), + MUX(0, "mout_aclk100_noc", mout_group1_p, SRC_TOP0, 20, 2), + + MUX(0, "mout_aclk333_432_gscl", mout_group4_p, SRC_TOP1, 0, 2), + MUX(0, "mout_aclk333_432_isp", mout_group4_p, + SRC_TOP1, 4, 2), + MUX(0, "mout_aclk333_432_isp0", mout_group4_p, SRC_TOP1, 12, 2), + MUX(0, "mout_aclk266", mout_group1_p, SRC_TOP1, 20, 2), + MUX(0, "mout_aclk333", mout_group1_p, SRC_TOP1, 28, 2), + + MUX(0, "mout_aclk400_disp1", mout_group1_p, SRC_TOP2, 4, 2), + MUX(0, "mout_aclk333_g2d", mout_group1_p, SRC_TOP2, 8, 2), + MUX(0, "mout_aclk266_g2d", mout_group1_p, SRC_TOP2, 12, 2), + MUX(0, "mout_aclk300_jpeg", mout_group1_p, SRC_TOP2, 20, 2), + MUX(0, "mout_aclk300_disp1", mout_group1_p, SRC_TOP2, 24, 2), + MUX(0, "mout_aclk300_gscl", mout_group1_p, SRC_TOP2, 28, 2), + + MUX(0, "mout_mau_epll_clk", mout_mau_epll_clk_p, SRC_TOP7, 20, 2), + + MUX(0, "mout_fimd1", mout_group3_p, SRC_DISP10, 4, 1), +}; + +struct samsung_div_clock exynos5420_div_clks[] __initdata = { + DIV(0, "dout_aclk400_wcore", "mout_aclk400_wcore_bpll", + DIV_TOP0, 16, 3), +}; + +static struct samsung_mux_clock exynos5x_mux_clks[] __initdata = { + MUX(0, "mout_user_pclk66_gpio", mout_user_pclk66_gpio_p, + SRC_TOP7, 4, 1), + MUX(0, "mout_mspll_kfc", mout_mspll_cpu_p, SRC_TOP7, 8, 2), + MUX(0, "mout_mspll_cpu", mout_mspll_cpu_p, SRC_TOP7, 12, 2), + + MUX(0, "mout_apll", mout_apll_p, SRC_CPU, 0, 1), + MUX(0, "mout_cpu", mout_cpu_p, SRC_CPU, 16, 1), + MUX(0, "mout_kpll", mout_kpll_p, SRC_KFC, 0, 1), + MUX(0, "mout_kfc", mout_kfc_p, SRC_KFC, 16, 1), + + MUX(0, "mout_aclk200", mout_group1_p, SRC_TOP0, 8, 2), + MUX(0, "mout_aclk200_fsys2", mout_group1_p, SRC_TOP0, 12, 2), + MUX(0, "mout_pclk200_fsys", mout_group1_p, SRC_TOP0, 24, 2), + MUX(0, "mout_aclk200_fsys", mout_group1_p, SRC_TOP0, 28, 2), + + MUX(0, "mout_aclk66", mout_group1_p, SRC_TOP1, 8, 2), + MUX(0, "mout_aclk166", mout_group1_p, SRC_TOP1, 24, 2), + + MUX(0, "mout_aclk_g3d", mout_group5_p, SRC_TOP2, 16, 1), + + MUX(0, "mout_user_aclk400_isp", mout_user_aclk400_isp_p, + SRC_TOP3, 0, 1), + MUX(0, "mout_user_aclk400_mscl", mout_user_aclk400_mscl_p, SRC_TOP3, 4, 1), - MUX_A(0, "mout_aclk200_disp1", aclk200_disp1_p, - SRC_TOP3, 8, 1, "aclk200_disp1"), - MUX(0, "mout_user_aclk200_fsys2", user_aclk200_fsys2_p, + MUX(0, "mout_user_aclk200_disp1", mout_user_aclk200_disp1_p, + SRC_TOP3, 8, 1), + MUX(0, "mout_user_aclk200_fsys2", mout_user_aclk200_fsys2_p, SRC_TOP3, 12, 1), - MUX(0, "mout_user_aclk200_fsys", user_aclk200_fsys_p, + MUX(0, "mout_user_aclk400_wcore", mout_user_aclk400_wcore_p, + SRC_TOP3, 16, 1), + MUX(0, "mout_user_aclk100_noc", mout_user_aclk100_noc_p, + SRC_TOP3, 20, 1), + MUX(0, "mout_user_pclk200_fsys", mout_user_pclk200_fsys_p, + SRC_TOP3, 24, 1), + MUX(0, "mout_user_aclk200_fsys", mout_user_aclk200_fsys_p, SRC_TOP3, 28, 1), - MUX(0, "mout_user_aclk333_432_gscl", user_aclk333_432_gscl_p, + MUX(0, "mout_user_aclk333_432_gscl", mout_user_aclk333_432_gscl_p, SRC_TOP4, 0, 1), - MUX(0, "mout_aclk66_peric", aclk66_peric_p, SRC_TOP4, 8, 1), - MUX(0, "mout_user_aclk266", user_aclk266_p, SRC_TOP4, 20, 1), - MUX(0, "mout_user_aclk166", user_aclk166_p, SRC_TOP4, 24, 1), - MUX(0, "mout_user_aclk333", user_aclk333_p, SRC_TOP4, 28, 1), - - MUX(0, "mout_aclk66_psgen", aclk66_peric_p, SRC_TOP5, 4, 1), - MUX(0, "mout_user_aclk333_g2d", user_aclk333_g2d_p, SRC_TOP5, 8, 1), - MUX(0, "mout_user_aclk266_g2d", user_aclk266_g2d_p, SRC_TOP5, 12, 1), - MUX_A(0, "mout_user_aclk_g3d", user_aclk_g3d_p, - SRC_TOP5, 16, 1, "aclkg3d"), - MUX(0, "mout_user_aclk300_jpeg", user_aclk300_jpeg_p, + MUX(0, "mout_user_aclk333_432_isp", mout_user_aclk333_432_isp_p, + SRC_TOP4, 4, 1), + MUX(0, "mout_user_aclk66_peric", mout_user_aclk66_peric_p, + SRC_TOP4, 8, 1), + MUX(0, "mout_user_aclk333_432_isp0", mout_user_aclk333_432_isp0_p, + SRC_TOP4, 12, 1), + MUX(0, "mout_user_aclk266_isp", mout_user_aclk266_isp_p, + SRC_TOP4, 16, 1), + MUX(0, "mout_user_aclk266", mout_user_aclk266_p, SRC_TOP4, 20, 1), + MUX(0, "mout_user_aclk166", mout_user_aclk166_p, SRC_TOP4, 24, 1), + MUX(0, "mout_user_aclk333", mout_user_aclk333_p, SRC_TOP4, 28, 1), + + MUX(0, "mout_user_aclk400_disp1", mout_user_aclk400_disp1_p, + SRC_TOP5, 0, 1), + MUX(0, "mout_user_aclk66_psgen", mout_user_aclk66_peric_p, + SRC_TOP5, 4, 1), + MUX(0, "mout_user_aclk333_g2d", mout_user_aclk333_g2d_p, + SRC_TOP5, 8, 1), + MUX(0, "mout_user_aclk266_g2d", mout_user_aclk266_g2d_p, + SRC_TOP5, 12, 1), + MUX(CLK_MOUT_G3D, "mout_user_aclk_g3d", mout_user_aclk_g3d_p, + SRC_TOP5, 16, 1), + MUX(0, "mout_user_aclk300_jpeg", mout_user_aclk300_jpeg_p, SRC_TOP5, 20, 1), - MUX(0, "mout_user_aclk300_disp1", user_aclk300_disp1_p, + MUX(0, "mout_user_aclk300_disp1", mout_user_aclk300_disp1_p, SRC_TOP5, 24, 1), - MUX(0, "mout_user_aclk300_gscl", user_aclk300_gscl_p, + MUX(0, "mout_user_aclk300_gscl", mout_user_aclk300_gscl_p, SRC_TOP5, 28, 1), - MUX(0, "sclk_mpll", mpll_p, SRC_TOP6, 0, 1), - MUX(0, "sclk_vpll", vpll_p, SRC_TOP6, 4, 1), - MUX(0, "sclk_spll", spll_p, SRC_TOP6, 8, 1), - MUX(0, "sclk_ipll", ipll_p, SRC_TOP6, 12, 1), - MUX(0, "sclk_rpll", rpll_p, SRC_TOP6, 16, 1), - MUX(0, "sclk_epll", epll_p, SRC_TOP6, 20, 1), - MUX(0, "sclk_dpll", dpll_p, SRC_TOP6, 24, 1), - MUX(0, "sclk_cpll", cpll_p, SRC_TOP6, 28, 1), - - MUX(0, "mout_sw_aclk400_mscl", sw_aclk400_mscl_p, SRC_TOP10, 4, 1), - MUX(0, "mout_sw_aclk200", sw_aclk200_p, SRC_TOP10, 8, 1), - MUX(0, "mout_sw_aclk200_fsys2", sw_aclk200_fsys2_p, + MUX(0, "mout_sclk_mpll", mout_mpll_p, SRC_TOP6, 0, 1), + MUX(CLK_MOUT_VPLL, "mout_sclk_vpll", mout_vpll_p, SRC_TOP6, 4, 1), + MUX(0, "mout_sclk_spll", mout_spll_p, SRC_TOP6, 8, 1), + MUX(0, "mout_sclk_ipll", mout_ipll_p, SRC_TOP6, 12, 1), + MUX(0, "mout_sclk_rpll", mout_rpll_p, SRC_TOP6, 16, 1), + MUX(0, "mout_sclk_epll", mout_epll_p, SRC_TOP6, 20, 1), + MUX(0, "mout_sclk_dpll", mout_dpll_p, SRC_TOP6, 24, 1), + MUX(0, "mout_sclk_cpll", mout_cpll_p, SRC_TOP6, 28, 1), + + MUX(0, "mout_sw_aclk400_isp", mout_sw_aclk400_isp_p, + SRC_TOP10, 0, 1), + MUX(0, "mout_sw_aclk400_mscl", mout_sw_aclk400_mscl_p, + SRC_TOP10, 4, 1), + MUX(0, "mout_sw_aclk200", mout_sw_aclk200_p, SRC_TOP10, 8, 1), + MUX(0, "mout_sw_aclk200_fsys2", mout_sw_aclk200_fsys2_p, SRC_TOP10, 12, 1), - MUX(0, "mout_sw_aclk200_fsys", sw_aclk200_fsys_p, SRC_TOP10, 28, 1), - - MUX(0, "mout_sw_aclk333_432_gscl", sw_aclk333_432_gscl_p, + MUX(0, "mout_sw_aclk400_wcore", mout_sw_aclk400_wcore_p, + SRC_TOP10, 16, 1), + MUX(0, "mout_sw_aclk100_noc", mout_sw_aclk100_noc_p, + SRC_TOP10, 20, 1), + MUX(0, "mout_sw_pclk200_fsys", mout_sw_pclk200_fsys_p, + SRC_TOP10, 24, 1), + MUX(0, "mout_sw_aclk200_fsys", mout_sw_aclk200_fsys_p, + SRC_TOP10, 28, 1), + + MUX(0, "mout_sw_aclk333_432_gscl", mout_sw_aclk333_432_gscl_p, SRC_TOP11, 0, 1), - MUX(0, "mout_sw_aclk66", sw_aclk66_p, SRC_TOP11, 8, 1), - MUX(0, "mout_sw_aclk266", sw_aclk266_p, SRC_TOP11, 20, 1), - MUX(0, "mout_sw_aclk166", sw_aclk166_p, SRC_TOP11, 24, 1), - MUX(0, "mout_sw_aclk333", sw_aclk333_p, SRC_TOP11, 28, 1), - - MUX(0, "mout_sw_aclk333_g2d", sw_aclk333_g2d_p, SRC_TOP12, 8, 1), - MUX(0, "mout_sw_aclk266_g2d", sw_aclk266_g2d_p, SRC_TOP12, 12, 1), - MUX(0, "mout_sw_aclk_g3d", sw_aclk_g3d_p, SRC_TOP12, 16, 1), - MUX(0, "mout_sw_aclk300_jpeg", sw_aclk300_jpeg_p, SRC_TOP12, 20, 1), - MUX(0, "mout_sw_aclk300_disp1", sw_aclk300_disp1_p, + MUX(0, "mout_sw_aclk333_432_isp", mout_sw_aclk333_432_isp_p, + SRC_TOP11, 4, 1), + MUX(0, "mout_sw_aclk66", mout_sw_aclk66_p, SRC_TOP11, 8, 1), + MUX(0, "mout_sw_aclk333_432_isp0", mout_sw_aclk333_432_isp0_p, + SRC_TOP11, 12, 1), + MUX(0, "mout_sw_aclk266", mout_sw_aclk266_p, SRC_TOP11, 20, 1), + MUX(0, "mout_sw_aclk166", mout_sw_aclk166_p, SRC_TOP11, 24, 1), + MUX(0, "mout_sw_aclk333", mout_sw_aclk333_p, SRC_TOP11, 28, 1), + + MUX(0, "mout_sw_aclk400_disp1", mout_sw_aclk400_disp1_p, + SRC_TOP12, 4, 1), + MUX(0, "mout_sw_aclk333_g2d", mout_sw_aclk333_g2d_p, + SRC_TOP12, 8, 1), + MUX(0, "mout_sw_aclk266_g2d", mout_sw_aclk266_g2d_p, + SRC_TOP12, 12, 1), + MUX(0, "mout_sw_aclk_g3d", mout_sw_aclk_g3d_p, SRC_TOP12, 16, 1), + MUX(0, "mout_sw_aclk300_jpeg", mout_sw_aclk300_jpeg_p, + SRC_TOP12, 20, 1), + MUX(0, "mout_sw_aclk300_disp1", mout_sw_aclk300_disp1_p, SRC_TOP12, 24, 1), - MUX(0, "mout_sw_aclk300_gscl", sw_aclk300_gscl_p, SRC_TOP12, 28, 1), + MUX(0, "mout_sw_aclk300_gscl", mout_sw_aclk300_gscl_p, + SRC_TOP12, 28, 1), /* DISP1 Block */ - MUX(0, "mout_fimd1", group3_p, SRC_DISP10, 4, 1), - MUX(0, "mout_mipi1", group2_p, SRC_DISP10, 16, 3), - MUX(0, "mout_dp1", group2_p, SRC_DISP10, 20, 3), - MUX(0, "mout_pixel", group2_p, SRC_DISP10, 24, 3), - MUX(CLK_MOUT_HDMI, "mout_hdmi", hdmi_p, SRC_DISP10, 28, 1), + MUX(0, "mout_mipi1", mout_group2_p, SRC_DISP10, 16, 3), + MUX(0, "mout_dp1", mout_group2_p, SRC_DISP10, 20, 3), + MUX(0, "mout_pixel", mout_group2_p, SRC_DISP10, 24, 3), + MUX(CLK_MOUT_HDMI, "mout_hdmi", mout_hdmi_p, SRC_DISP10, 28, 1), + MUX(0, "mout_fimd1_opt", mout_group2_p, SRC_DISP10, 8, 3), + + MUX(0, "mout_fimd1_final", mout_fimd1_final_p, TOP_SPARE2, 8, 1), /* MAU Block */ - MUX(0, "mout_maudio0", maudio0_p, SRC_MAU, 28, 3), + MUX(CLK_MOUT_MAUDIO0, "mout_maudio0", mout_maudio0_p, SRC_MAU, 28, 3), /* FSYS Block */ - MUX(0, "mout_usbd301", group2_p, SRC_FSYS, 4, 3), - MUX(0, "mout_mmc0", group2_p, SRC_FSYS, 8, 3), - MUX(0, "mout_mmc1", group2_p, SRC_FSYS, 12, 3), - MUX(0, "mout_mmc2", group2_p, SRC_FSYS, 16, 3), - MUX(0, "mout_usbd300", group2_p, SRC_FSYS, 20, 3), - MUX(0, "mout_unipro", group2_p, SRC_FSYS, 24, 3), + MUX(0, "mout_usbd301", mout_group2_p, SRC_FSYS, 4, 3), + MUX(0, "mout_mmc0", mout_group2_p, SRC_FSYS, 8, 3), + MUX(0, "mout_mmc1", mout_group2_p, SRC_FSYS, 12, 3), + MUX(0, "mout_mmc2", mout_group2_p, SRC_FSYS, 16, 3), + MUX(0, "mout_usbd300", mout_group2_p, SRC_FSYS, 20, 3), + MUX(0, "mout_unipro", mout_group2_p, SRC_FSYS, 24, 3), + MUX(0, "mout_mphy_refclk", mout_group2_p, SRC_FSYS, 28, 3), /* PERIC Block */ - MUX(0, "mout_uart0", group2_p, SRC_PERIC0, 4, 3), - MUX(0, "mout_uart1", group2_p, SRC_PERIC0, 8, 3), - MUX(0, "mout_uart2", group2_p, SRC_PERIC0, 12, 3), - MUX(0, "mout_uart3", group2_p, SRC_PERIC0, 16, 3), - MUX(0, "mout_pwm", group2_p, SRC_PERIC0, 24, 3), - MUX(0, "mout_spdif", spdif_p, SRC_PERIC0, 28, 3), - MUX(0, "mout_audio0", audio0_p, SRC_PERIC1, 8, 3), - MUX(0, "mout_audio1", audio1_p, SRC_PERIC1, 12, 3), - MUX(0, "mout_audio2", audio2_p, SRC_PERIC1, 16, 3), - MUX(0, "mout_spi0", group2_p, SRC_PERIC1, 20, 3), - MUX(0, "mout_spi1", group2_p, SRC_PERIC1, 24, 3), - MUX(0, "mout_spi2", group2_p, SRC_PERIC1, 28, 3), + MUX(0, "mout_uart0", mout_group2_p, SRC_PERIC0, 4, 3), + MUX(0, "mout_uart1", mout_group2_p, SRC_PERIC0, 8, 3), + MUX(0, "mout_uart2", mout_group2_p, SRC_PERIC0, 12, 3), + MUX(0, "mout_uart3", mout_group2_p, SRC_PERIC0, 16, 3), + MUX(0, "mout_pwm", mout_group2_p, SRC_PERIC0, 24, 3), + MUX(0, "mout_spdif", mout_spdif_p, SRC_PERIC0, 28, 3), + MUX(0, "mout_audio0", mout_audio0_p, SRC_PERIC1, 8, 3), + MUX(0, "mout_audio1", mout_audio1_p, SRC_PERIC1, 12, 3), + MUX(0, "mout_audio2", mout_audio2_p, SRC_PERIC1, 16, 3), + MUX(0, "mout_spi0", mout_group2_p, SRC_PERIC1, 20, 3), + MUX(0, "mout_spi1", mout_group2_p, SRC_PERIC1, 24, 3), + MUX(0, "mout_spi2", mout_group2_p, SRC_PERIC1, 28, 3), + + /* ISP Block */ + MUX(0, "mout_pwm_isp", mout_group2_p, SRC_ISP, 24, 3), + MUX(0, "mout_uart_isp", mout_group2_p, SRC_ISP, 20, 3), + MUX(0, "mout_spi0_isp", mout_group2_p, SRC_ISP, 12, 3), + MUX(0, "mout_spi1_isp", mout_group2_p, SRC_ISP, 16, 3), + MUX(0, "mout_isp_sensor", mout_group2_p, SRC_ISP, 28, 3), }; -static struct samsung_div_clock exynos5420_div_clks[] __initdata = { +static struct samsung_div_clock exynos5x_div_clks[] __initdata = { DIV(0, "div_arm", "mout_cpu", DIV_CPU0, 0, 3), DIV(0, "sclk_apll", "mout_apll", DIV_CPU0, 24, 3), DIV(0, "armclk2", "div_arm", DIV_CPU0, 28, 3), - DIV(0, "div_kfc", "mout_cpu_kfc", DIV_KFC0, 0, 3), + DIV(0, "div_kfc", "mout_kfc", DIV_KFC0, 0, 3), DIV(0, "sclk_kpll", "mout_kpll", DIV_KFC0, 24, 3), + DIV(0, "dout_aclk400_isp", "mout_aclk400_isp", DIV_TOP0, 0, 3), DIV(0, "dout_aclk400_mscl", "mout_aclk400_mscl", DIV_TOP0, 4, 3), DIV(0, "dout_aclk200", "mout_aclk200", DIV_TOP0, 8, 3), DIV(0, "dout_aclk200_fsys2", "mout_aclk200_fsys2", DIV_TOP0, 12, 3), + DIV(0, "dout_aclk100_noc", "mout_aclk100_noc", DIV_TOP0, 20, 3), DIV(0, "dout_pclk200_fsys", "mout_pclk200_fsys", DIV_TOP0, 24, 3), DIV(0, "dout_aclk200_fsys", "mout_aclk200_fsys", DIV_TOP0, 28, 3), DIV(0, "dout_aclk333_432_gscl", "mout_aclk333_432_gscl", DIV_TOP1, 0, 3), + DIV(0, "dout_aclk333_432_isp", "mout_aclk333_432_isp", + DIV_TOP1, 4, 3), DIV(0, "dout_aclk66", "mout_aclk66", DIV_TOP1, 8, 6), + DIV(0, "dout_aclk333_432_isp0", "mout_aclk333_432_isp0", + DIV_TOP1, 16, 3), DIV(0, "dout_aclk266", "mout_aclk266", DIV_TOP1, 20, 3), DIV(0, "dout_aclk166", "mout_aclk166", DIV_TOP1, 24, 3), DIV(0, "dout_aclk333", "mout_aclk333", DIV_TOP1, 28, 3), @@ -458,15 +773,16 @@ static struct samsung_div_clock exynos5420_div_clks[] __initdata = { DIV(0, "dout_aclk266_g2d", "mout_aclk266_g2d", DIV_TOP2, 12, 3), DIV(0, "dout_aclk_g3d", "mout_aclk_g3d", DIV_TOP2, 16, 3), DIV(0, "dout_aclk300_jpeg", "mout_aclk300_jpeg", DIV_TOP2, 20, 3), - DIV_A(0, "dout_aclk300_disp1", "mout_aclk300_disp1", - DIV_TOP2, 24, 3, "aclk300_disp1"), + DIV(0, "dout_aclk300_disp1", "mout_aclk300_disp1", DIV_TOP2, 24, 3), DIV(0, "dout_aclk300_gscl", "mout_aclk300_gscl", DIV_TOP2, 28, 3), /* DISP1 Block */ - DIV(0, "dout_fimd1", "mout_fimd1", DIV_DISP10, 0, 4), + DIV(0, "dout_fimd1", "mout_fimd1_final", DIV_DISP10, 0, 4), DIV(0, "dout_mipi1", "mout_mipi1", DIV_DISP10, 16, 8), DIV(0, "dout_dp1", "mout_dp1", DIV_DISP10, 24, 4), DIV(CLK_DOUT_PIXEL, "dout_hdmi_pixel", "mout_pixel", DIV_DISP10, 28, 4), + DIV(0, "dout_disp1_blk", "aclk200_disp1", DIV2_RATIO0, 16, 2), + DIV(0, "dout_aclk400_disp1", "mout_aclk400_disp1", DIV_TOP2, 4, 3), /* Audio Block */ DIV(0, "dout_maudio0", "mout_maudio0", DIV_MAU, 20, 4), @@ -484,6 +800,7 @@ static struct samsung_div_clock exynos5420_div_clks[] __initdata = { DIV(0, "dout_mmc2", "mout_mmc2", DIV_FSYS1, 20, 10), DIV(0, "dout_unipro", "mout_unipro", DIV_FSYS2, 24, 8), + DIV(0, "dout_mphy_refclk", "mout_mphy_refclk", DIV_FSYS2, 16, 8), /* UART and PWM */ DIV(0, "dout_uart0", "mout_uart0", DIV_PERIC0, 8, 4), @@ -497,6 +814,9 @@ static struct samsung_div_clock exynos5420_div_clks[] __initdata = { DIV(0, "dout_spi1", "mout_spi1", DIV_PERIC1, 24, 4), DIV(0, "dout_spi2", "mout_spi2", DIV_PERIC1, 28, 4), + /* Mfc Block */ + DIV(0, "dout_mfc_blk", "mout_user_aclk333", DIV4_RATIO, 0, 2), + /* PCM */ DIV(0, "dout_pcm1", "dout_audio1", DIV_PERIC2, 16, 8), DIV(0, "dout_pcm2", "dout_audio2", DIV_PERIC2, 24, 8), @@ -509,15 +829,43 @@ static struct samsung_div_clock exynos5420_div_clks[] __initdata = { DIV(0, "dout_audio2", "mout_audio2", DIV_PERIC3, 28, 4), /* SPI Pre-Ratio */ - DIV(0, "dout_pre_spi0", "dout_spi0", DIV_PERIC4, 8, 8), - DIV(0, "dout_pre_spi1", "dout_spi1", DIV_PERIC4, 16, 8), - DIV(0, "dout_pre_spi2", "dout_spi2", DIV_PERIC4, 24, 8), + DIV(0, "dout_spi0_pre", "dout_spi0", DIV_PERIC4, 8, 8), + DIV(0, "dout_spi1_pre", "dout_spi1", DIV_PERIC4, 16, 8), + DIV(0, "dout_spi2_pre", "dout_spi2", DIV_PERIC4, 24, 8), + + /* GSCL Block */ + DIV(0, "dout_gscl_blk_300", "mout_user_aclk300_gscl", + DIV2_RATIO0, 4, 2), + DIV(0, "dout_gscl_blk_333", "aclk333_432_gscl", DIV2_RATIO0, 6, 2), + + /* MSCL Block */ + DIV(0, "dout_mscl_blk", "aclk400_mscl", DIV2_RATIO0, 28, 2), + + /* PSGEN */ + DIV(0, "dout_gen_blk", "mout_user_aclk266", DIV2_RATIO0, 8, 1), + DIV(0, "dout_jpg_blk", "aclk166", DIV2_RATIO0, 20, 1), + + /* ISP Block */ + DIV(0, "dout_isp_sensor0", "mout_isp_sensor", SCLK_DIV_ISP0, 8, 8), + DIV(0, "dout_isp_sensor1", "mout_isp_sensor", SCLK_DIV_ISP0, 16, 8), + DIV(0, "dout_isp_sensor2", "mout_isp_sensor", SCLK_DIV_ISP0, 24, 8), + DIV(0, "dout_pwm_isp", "mout_pwm_isp", SCLK_DIV_ISP1, 28, 4), + DIV(0, "dout_uart_isp", "mout_uart_isp", SCLK_DIV_ISP1, 24, 4), + DIV(0, "dout_spi0_isp", "mout_spi0_isp", SCLK_DIV_ISP1, 16, 4), + DIV(0, "dout_spi1_isp", "mout_spi1_isp", SCLK_DIV_ISP1, 20, 4), + DIV_F(0, "dout_spi0_isp_pre", "dout_spi0_isp", SCLK_DIV_ISP1, 0, 8, + CLK_SET_RATE_PARENT, 0), + DIV_F(0, "dout_spi1_isp_pre", "dout_spi1_isp", SCLK_DIV_ISP1, 8, 8, + CLK_SET_RATE_PARENT, 0), }; -static struct samsung_gate_clock exynos5420_gate_clks[] __initdata = { - /* TODO: Re-verify the CG bits for all the gate clocks */ - GATE_A(CLK_MCT, "pclk_st", "aclk66_psgen", GATE_BUS_PERIS1, 2, 0, 0, - "mct"), +static struct samsung_gate_clock exynos5x_gate_clks[] __initdata = { + /* G2D */ + GATE(CLK_MDMA0, "mdma0", "aclk266_g2d", GATE_IP_G2D, 1, 0, 0), + GATE(CLK_SSS, "sss", "aclk266_g2d", GATE_IP_G2D, 2, 0, 0), + GATE(CLK_G2D, "g2d", "aclk333_g2d", GATE_IP_G2D, 3, 0, 0), + GATE(CLK_SMMU_MDMA0, "smmu_mdma0", "aclk266_g2d", GATE_IP_G2D, 5, 0, 0), + GATE(CLK_SMMU_G2D, "smmu_g2d", "aclk333_g2d", GATE_IP_G2D, 7, 0, 0), GATE(0, "aclk200_fsys", "mout_user_aclk200_fsys", GATE_BUS_FSYS0, 9, CLK_IGNORE_UNUSED, 0), @@ -530,20 +878,42 @@ static struct samsung_gate_clock exynos5420_gate_clks[] __initdata = { GATE_BUS_TOP, 1, CLK_IGNORE_UNUSED, 0), GATE(0, "aclk300_jpeg", "mout_user_aclk300_jpeg", GATE_BUS_TOP, 4, CLK_IGNORE_UNUSED, 0), + GATE(0, "aclk333_432_isp0", "mout_user_aclk333_432_isp0", + GATE_BUS_TOP, 5, 0, 0), GATE(0, "aclk300_gscl", "mout_user_aclk300_gscl", GATE_BUS_TOP, 6, CLK_IGNORE_UNUSED, 0), GATE(0, "aclk333_432_gscl", "mout_user_aclk333_432_gscl", GATE_BUS_TOP, 7, CLK_IGNORE_UNUSED, 0), - GATE(0, "pclk66_gpio", "mout_sw_aclk66", + GATE(0, "aclk333_432_isp", "mout_user_aclk333_432_isp", + GATE_BUS_TOP, 8, 0, 0), + GATE(CLK_PCLK66_GPIO, "pclk66_gpio", "mout_user_pclk66_gpio", GATE_BUS_TOP, 9, CLK_IGNORE_UNUSED, 0), - GATE(0, "aclk66_psgen", "mout_aclk66_psgen", + GATE(0, "aclk66_psgen", "mout_user_aclk66_psgen", GATE_BUS_TOP, 10, CLK_IGNORE_UNUSED, 0), - GATE(0, "aclk66_peric", "mout_aclk66_peric", - GATE_BUS_TOP, 11, 0, 0), + GATE(CLK_ACLK66_PERIC, "aclk66_peric", "mout_user_aclk66_peric", + GATE_BUS_TOP, 11, CLK_IGNORE_UNUSED, 0), + GATE(0, "aclk266_isp", "mout_user_aclk266_isp", + GATE_BUS_TOP, 13, 0, 0), GATE(0, "aclk166", "mout_user_aclk166", GATE_BUS_TOP, 14, CLK_IGNORE_UNUSED, 0), GATE(0, "aclk333", "mout_aclk333", GATE_BUS_TOP, 15, CLK_IGNORE_UNUSED, 0), + GATE(0, "aclk400_isp", "mout_user_aclk400_isp", + GATE_BUS_TOP, 16, 0, 0), + GATE(0, "aclk400_mscl", "mout_user_aclk400_mscl", + GATE_BUS_TOP, 17, 0, 0), + GATE(0, "aclk200_disp1", "mout_user_aclk200_disp1", + GATE_BUS_TOP, 18, 0, 0), + GATE(CLK_SCLK_MPHY_IXTAL24, "sclk_mphy_ixtal24", "mphy_refclk_ixtal24", + GATE_BUS_TOP, 28, 0, 0), + GATE(CLK_SCLK_HSIC_12M, "sclk_hsic_12m", "ff_hsic_12m", + GATE_BUS_TOP, 29, 0, 0), + + GATE(0, "aclk300_disp1", "mout_user_aclk300_disp1", + SRC_MASK_TOP2, 24, 0, 0), + + GATE(CLK_MAU_EPLL, "mau_epll", "mout_mau_epll_clk", + SRC_MASK_TOP7, 20, 0, 0), /* sclk */ GATE(CLK_SCLK_UART0, "sclk_uart0", "dout_uart0", @@ -554,11 +924,11 @@ static struct samsung_gate_clock exynos5420_gate_clks[] __initdata = { GATE_TOP_SCLK_PERIC, 2, CLK_SET_RATE_PARENT, 0), GATE(CLK_SCLK_UART3, "sclk_uart3", "dout_uart3", GATE_TOP_SCLK_PERIC, 3, CLK_SET_RATE_PARENT, 0), - GATE(CLK_SCLK_SPI0, "sclk_spi0", "dout_pre_spi0", + GATE(CLK_SCLK_SPI0, "sclk_spi0", "dout_spi0_pre", GATE_TOP_SCLK_PERIC, 6, CLK_SET_RATE_PARENT, 0), - GATE(CLK_SCLK_SPI1, "sclk_spi1", "dout_pre_spi1", + GATE(CLK_SCLK_SPI1, "sclk_spi1", "dout_spi1_pre", GATE_TOP_SCLK_PERIC, 7, CLK_SET_RATE_PARENT, 0), - GATE(CLK_SCLK_SPI2, "sclk_spi2", "dout_pre_spi2", + GATE(CLK_SCLK_SPI2, "sclk_spi2", "dout_spi2_pre", GATE_TOP_SCLK_PERIC, 8, CLK_SET_RATE_PARENT, 0), GATE(CLK_SCLK_SPDIF, "sclk_spdif", "mout_spdif", GATE_TOP_SCLK_PERIC, 9, CLK_SET_RATE_PARENT, 0), @@ -588,164 +958,191 @@ static struct samsung_gate_clock exynos5420_gate_clks[] __initdata = { GATE(CLK_SCLK_USBD301, "sclk_usbd301", "dout_usbd301", GATE_TOP_SCLK_FSYS, 10, CLK_SET_RATE_PARENT, 0), - GATE(CLK_SCLK_USBD301, "sclk_unipro", "dout_unipro", - SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0), - - GATE(CLK_SCLK_GSCL_WA, "sclk_gscl_wa", "aclK333_432_gscl", - GATE_TOP_SCLK_GSCL, 6, CLK_SET_RATE_PARENT, 0), - GATE(CLK_SCLK_GSCL_WB, "sclk_gscl_wb", "aclk333_432_gscl", - GATE_TOP_SCLK_GSCL, 7, CLK_SET_RATE_PARENT, 0), - /* Display */ GATE(CLK_SCLK_FIMD1, "sclk_fimd1", "dout_fimd1", - GATE_TOP_SCLK_DISP1, 0, CLK_SET_RATE_PARENT, 0), + GATE_TOP_SCLK_DISP1, 0, CLK_SET_RATE_PARENT, 0), GATE(CLK_SCLK_MIPI1, "sclk_mipi1", "dout_mipi1", - GATE_TOP_SCLK_DISP1, 3, CLK_SET_RATE_PARENT, 0), + GATE_TOP_SCLK_DISP1, 3, CLK_SET_RATE_PARENT, 0), GATE(CLK_SCLK_HDMI, "sclk_hdmi", "mout_hdmi", - GATE_TOP_SCLK_DISP1, 9, CLK_SET_RATE_PARENT, 0), + GATE_TOP_SCLK_DISP1, 9, 0, 0), GATE(CLK_SCLK_PIXEL, "sclk_pixel", "dout_hdmi_pixel", - GATE_TOP_SCLK_DISP1, 10, CLK_SET_RATE_PARENT, 0), + GATE_TOP_SCLK_DISP1, 10, CLK_SET_RATE_PARENT, 0), GATE(CLK_SCLK_DP1, "sclk_dp1", "dout_dp1", - GATE_TOP_SCLK_DISP1, 20, CLK_SET_RATE_PARENT, 0), + GATE_TOP_SCLK_DISP1, 20, CLK_SET_RATE_PARENT, 0), /* Maudio Block */ GATE(CLK_SCLK_MAUDIO0, "sclk_maudio0", "dout_maudio0", GATE_TOP_SCLK_MAU, 0, CLK_SET_RATE_PARENT, 0), GATE(CLK_SCLK_MAUPCM0, "sclk_maupcm0", "dout_maupcm0", GATE_TOP_SCLK_MAU, 1, CLK_SET_RATE_PARENT, 0), - /* FSYS */ + + /* FSYS Block */ GATE(CLK_TSI, "tsi", "aclk200_fsys", GATE_BUS_FSYS0, 0, 0, 0), GATE(CLK_PDMA0, "pdma0", "aclk200_fsys", GATE_BUS_FSYS0, 1, 0, 0), GATE(CLK_PDMA1, "pdma1", "aclk200_fsys", GATE_BUS_FSYS0, 2, 0, 0), GATE(CLK_UFS, "ufs", "aclk200_fsys2", GATE_BUS_FSYS0, 3, 0, 0), - GATE(CLK_RTIC, "rtic", "aclk200_fsys", GATE_BUS_FSYS0, 5, 0, 0), - GATE(CLK_MMC0, "mmc0", "aclk200_fsys2", GATE_BUS_FSYS0, 12, 0, 0), - GATE(CLK_MMC1, "mmc1", "aclk200_fsys2", GATE_BUS_FSYS0, 13, 0, 0), - GATE(CLK_MMC2, "mmc2", "aclk200_fsys2", GATE_BUS_FSYS0, 14, 0, 0), + GATE(CLK_RTIC, "rtic", "aclk200_fsys", GATE_IP_FSYS, 9, 0, 0), + GATE(CLK_MMC0, "mmc0", "aclk200_fsys2", GATE_IP_FSYS, 12, 0, 0), + GATE(CLK_MMC1, "mmc1", "aclk200_fsys2", GATE_IP_FSYS, 13, 0, 0), + GATE(CLK_MMC2, "mmc2", "aclk200_fsys2", GATE_IP_FSYS, 14, 0, 0), GATE(CLK_SROMC, "sromc", "aclk200_fsys2", - GATE_BUS_FSYS0, 19, CLK_IGNORE_UNUSED, 0), - GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_BUS_FSYS0, 20, 0, 0), - GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_BUS_FSYS0, 21, 0, 0), - GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_BUS_FSYS0, 28, 0, 0), - - /* UART */ - GATE(CLK_UART0, "uart0", "aclk66_peric", GATE_BUS_PERIC, 4, 0, 0), - GATE(CLK_UART1, "uart1", "aclk66_peric", GATE_BUS_PERIC, 5, 0, 0), - GATE_A(CLK_UART2, "uart2", "aclk66_peric", - GATE_BUS_PERIC, 6, CLK_IGNORE_UNUSED, 0, "uart2"), - GATE(CLK_UART3, "uart3", "aclk66_peric", GATE_BUS_PERIC, 7, 0, 0), - /* I2C */ - GATE(CLK_I2C0, "i2c0", "aclk66_peric", GATE_BUS_PERIC, 9, 0, 0), - GATE(CLK_I2C1, "i2c1", "aclk66_peric", GATE_BUS_PERIC, 10, 0, 0), - GATE(CLK_I2C2, "i2c2", "aclk66_peric", GATE_BUS_PERIC, 11, 0, 0), - GATE(CLK_I2C3, "i2c3", "aclk66_peric", GATE_BUS_PERIC, 12, 0, 0), - GATE(CLK_I2C4, "i2c4", "aclk66_peric", GATE_BUS_PERIC, 13, 0, 0), - GATE(CLK_I2C5, "i2c5", "aclk66_peric", GATE_BUS_PERIC, 14, 0, 0), - GATE(CLK_I2C6, "i2c6", "aclk66_peric", GATE_BUS_PERIC, 15, 0, 0), - GATE(CLK_I2C7, "i2c7", "aclk66_peric", GATE_BUS_PERIC, 16, 0, 0), - GATE(CLK_I2C_HDMI, "i2c_hdmi", "aclk66_peric", GATE_BUS_PERIC, 17, 0, - 0), - GATE(CLK_TSADC, "tsadc", "aclk66_peric", GATE_BUS_PERIC, 18, 0, 0), - /* SPI */ - GATE(CLK_SPI0, "spi0", "aclk66_peric", GATE_BUS_PERIC, 19, 0, 0), - GATE(CLK_SPI1, "spi1", "aclk66_peric", GATE_BUS_PERIC, 20, 0, 0), - GATE(CLK_SPI2, "spi2", "aclk66_peric", GATE_BUS_PERIC, 21, 0, 0), - GATE(CLK_KEYIF, "keyif", "aclk66_peric", GATE_BUS_PERIC, 22, 0, 0), - /* I2S */ - GATE(CLK_I2S1, "i2s1", "aclk66_peric", GATE_BUS_PERIC, 23, 0, 0), - GATE(CLK_I2S2, "i2s2", "aclk66_peric", GATE_BUS_PERIC, 24, 0, 0), - /* PCM */ - GATE(CLK_PCM1, "pcm1", "aclk66_peric", GATE_BUS_PERIC, 25, 0, 0), - GATE(CLK_PCM2, "pcm2", "aclk66_peric", GATE_BUS_PERIC, 26, 0, 0), - /* PWM */ - GATE(CLK_PWM, "pwm", "aclk66_peric", GATE_BUS_PERIC, 27, 0, 0), - /* SPDIF */ - GATE(CLK_SPDIF, "spdif", "aclk66_peric", GATE_BUS_PERIC, 29, 0, 0), + GATE_IP_FSYS, 17, CLK_IGNORE_UNUSED, 0), + GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_IP_FSYS, 18, 0, 0), + GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_IP_FSYS, 19, 0, 0), + GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_IP_FSYS, 20, 0, 0), + GATE(CLK_SCLK_UNIPRO, "sclk_unipro", "dout_unipro", + SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0), - GATE(CLK_I2C8, "i2c8", "aclk66_peric", GATE_BUS_PERIC1, 0, 0, 0), - GATE(CLK_I2C9, "i2c9", "aclk66_peric", GATE_BUS_PERIC1, 1, 0, 0), - GATE(CLK_I2C10, "i2c10", "aclk66_peric", GATE_BUS_PERIC1, 2, 0, 0), + /* PERIC Block */ + GATE(CLK_UART0, "uart0", "aclk66_peric", GATE_IP_PERIC, 0, 0, 0), + GATE(CLK_UART1, "uart1", "aclk66_peric", GATE_IP_PERIC, 1, 0, 0), + GATE(CLK_UART2, "uart2", "aclk66_peric", GATE_IP_PERIC, 2, 0, 0), + GATE(CLK_UART3, "uart3", "aclk66_peric", GATE_IP_PERIC, 3, 0, 0), + GATE(CLK_I2C0, "i2c0", "aclk66_peric", GATE_IP_PERIC, 6, 0, 0), + GATE(CLK_I2C1, "i2c1", "aclk66_peric", GATE_IP_PERIC, 7, 0, 0), + GATE(CLK_I2C2, "i2c2", "aclk66_peric", GATE_IP_PERIC, 8, 0, 0), + GATE(CLK_I2C3, "i2c3", "aclk66_peric", GATE_IP_PERIC, 9, 0, 0), + GATE(CLK_USI0, "usi0", "aclk66_peric", GATE_IP_PERIC, 10, 0, 0), + GATE(CLK_USI1, "usi1", "aclk66_peric", GATE_IP_PERIC, 11, 0, 0), + GATE(CLK_USI2, "usi2", "aclk66_peric", GATE_IP_PERIC, 12, 0, 0), + GATE(CLK_USI3, "usi3", "aclk66_peric", GATE_IP_PERIC, 13, 0, 0), + GATE(CLK_I2C_HDMI, "i2c_hdmi", "aclk66_peric", GATE_IP_PERIC, 14, 0, 0), + GATE(CLK_TSADC, "tsadc", "aclk66_peric", GATE_IP_PERIC, 15, 0, 0), + GATE(CLK_SPI0, "spi0", "aclk66_peric", GATE_IP_PERIC, 16, 0, 0), + GATE(CLK_SPI1, "spi1", "aclk66_peric", GATE_IP_PERIC, 17, 0, 0), + GATE(CLK_SPI2, "spi2", "aclk66_peric", GATE_IP_PERIC, 18, 0, 0), + GATE(CLK_I2S1, "i2s1", "aclk66_peric", GATE_IP_PERIC, 20, 0, 0), + GATE(CLK_I2S2, "i2s2", "aclk66_peric", GATE_IP_PERIC, 21, 0, 0), + GATE(CLK_PCM1, "pcm1", "aclk66_peric", GATE_IP_PERIC, 22, 0, 0), + GATE(CLK_PCM2, "pcm2", "aclk66_peric", GATE_IP_PERIC, 23, 0, 0), + GATE(CLK_PWM, "pwm", "aclk66_peric", GATE_IP_PERIC, 24, 0, 0), + GATE(CLK_SPDIF, "spdif", "aclk66_peric", GATE_IP_PERIC, 26, 0, 0), + GATE(CLK_USI4, "usi4", "aclk66_peric", GATE_IP_PERIC, 28, 0, 0), + GATE(CLK_USI5, "usi5", "aclk66_peric", GATE_IP_PERIC, 30, 0, 0), + GATE(CLK_USI6, "usi6", "aclk66_peric", GATE_IP_PERIC, 31, 0, 0), + GATE(CLK_KEYIF, "keyif", "aclk66_peric", GATE_BUS_PERIC, 22, 0, 0), + + /* PERIS Block */ GATE(CLK_CHIPID, "chipid", "aclk66_psgen", - GATE_BUS_PERIS0, 12, CLK_IGNORE_UNUSED, 0), + GATE_IP_PERIS, 0, CLK_IGNORE_UNUSED, 0), GATE(CLK_SYSREG, "sysreg", "aclk66_psgen", - GATE_BUS_PERIS0, 13, CLK_IGNORE_UNUSED, 0), - GATE(CLK_TZPC0, "tzpc0", "aclk66_psgen", GATE_BUS_PERIS0, 18, 0, 0), - GATE(CLK_TZPC1, "tzpc1", "aclk66_psgen", GATE_BUS_PERIS0, 19, 0, 0), - GATE(CLK_TZPC2, "tzpc2", "aclk66_psgen", GATE_BUS_PERIS0, 20, 0, 0), - GATE(CLK_TZPC3, "tzpc3", "aclk66_psgen", GATE_BUS_PERIS0, 21, 0, 0), - GATE(CLK_TZPC4, "tzpc4", "aclk66_psgen", GATE_BUS_PERIS0, 22, 0, 0), - GATE(CLK_TZPC5, "tzpc5", "aclk66_psgen", GATE_BUS_PERIS0, 23, 0, 0), - GATE(CLK_TZPC6, "tzpc6", "aclk66_psgen", GATE_BUS_PERIS0, 24, 0, 0), - GATE(CLK_TZPC7, "tzpc7", "aclk66_psgen", GATE_BUS_PERIS0, 25, 0, 0), - GATE(CLK_TZPC8, "tzpc8", "aclk66_psgen", GATE_BUS_PERIS0, 26, 0, 0), - GATE(CLK_TZPC9, "tzpc9", "aclk66_psgen", GATE_BUS_PERIS0, 27, 0, 0), - - GATE(CLK_HDMI_CEC, "hdmi_cec", "aclk66_psgen", GATE_BUS_PERIS1, 0, 0, - 0), + GATE_IP_PERIS, 1, CLK_IGNORE_UNUSED, 0), + GATE(CLK_TZPC0, "tzpc0", "aclk66_psgen", GATE_IP_PERIS, 6, 0, 0), + GATE(CLK_TZPC1, "tzpc1", "aclk66_psgen", GATE_IP_PERIS, 7, 0, 0), + GATE(CLK_TZPC2, "tzpc2", "aclk66_psgen", GATE_IP_PERIS, 8, 0, 0), + GATE(CLK_TZPC3, "tzpc3", "aclk66_psgen", GATE_IP_PERIS, 9, 0, 0), + GATE(CLK_TZPC4, "tzpc4", "aclk66_psgen", GATE_IP_PERIS, 10, 0, 0), + GATE(CLK_TZPC5, "tzpc5", "aclk66_psgen", GATE_IP_PERIS, 11, 0, 0), + GATE(CLK_TZPC6, "tzpc6", "aclk66_psgen", GATE_IP_PERIS, 12, 0, 0), + GATE(CLK_TZPC7, "tzpc7", "aclk66_psgen", GATE_IP_PERIS, 13, 0, 0), + GATE(CLK_TZPC8, "tzpc8", "aclk66_psgen", GATE_IP_PERIS, 14, 0, 0), + GATE(CLK_TZPC9, "tzpc9", "aclk66_psgen", GATE_IP_PERIS, 15, 0, 0), + GATE(CLK_HDMI_CEC, "hdmi_cec", "aclk66_psgen", GATE_IP_PERIS, 16, 0, 0), + GATE(CLK_MCT, "mct", "aclk66_psgen", GATE_IP_PERIS, 18, 0, 0), + GATE(CLK_WDT, "wdt", "aclk66_psgen", GATE_IP_PERIS, 19, 0, 0), + GATE(CLK_RTC, "rtc", "aclk66_psgen", GATE_IP_PERIS, 20, 0, 0), + GATE(CLK_TMU, "tmu", "aclk66_psgen", GATE_IP_PERIS, 21, 0, 0), + GATE(CLK_TMU_GPU, "tmu_gpu", "aclk66_psgen", GATE_IP_PERIS, 22, 0, 0), + GATE(CLK_SECKEY, "seckey", "aclk66_psgen", GATE_BUS_PERIS1, 1, 0, 0), - GATE(CLK_WDT, "wdt", "aclk66_psgen", GATE_BUS_PERIS1, 3, 0, 0), - GATE(CLK_RTC, "rtc", "aclk66_psgen", GATE_BUS_PERIS1, 4, 0, 0), - GATE(CLK_TMU, "tmu", "aclk66_psgen", GATE_BUS_PERIS1, 5, 0, 0), - GATE(CLK_TMU_GPU, "tmu_gpu", "aclk66_psgen", GATE_BUS_PERIS1, 6, 0, 0), + + /* GEN Block */ + GATE(CLK_ROTATOR, "rotator", "mout_user_aclk266", GATE_IP_GEN, 1, 0, 0), + GATE(CLK_JPEG, "jpeg", "aclk300_jpeg", GATE_IP_GEN, 2, 0, 0), + GATE(CLK_JPEG2, "jpeg2", "aclk300_jpeg", GATE_IP_GEN, 3, 0, 0), + GATE(CLK_MDMA1, "mdma1", "mout_user_aclk266", GATE_IP_GEN, 4, 0, 0), + GATE(CLK_TOP_RTC, "top_rtc", "aclk66_psgen", GATE_IP_GEN, 5, 0, 0), + GATE(CLK_SMMU_ROTATOR, "smmu_rotator", "dout_gen_blk", + GATE_IP_GEN, 6, 0, 0), + GATE(CLK_SMMU_JPEG, "smmu_jpeg", "dout_jpg_blk", GATE_IP_GEN, 7, 0, 0), + GATE(CLK_SMMU_MDMA1, "smmu_mdma1", "dout_gen_blk", + GATE_IP_GEN, 9, 0, 0), + + /* GATE_IP_GEN doesn't list gates for smmu_jpeg2 and mc */ + GATE(CLK_SMMU_JPEG2, "smmu_jpeg2", "dout_jpg_blk", + GATE_BUS_GEN, 28, 0, 0), + GATE(CLK_MC, "mc", "aclk66_psgen", GATE_BUS_GEN, 12, 0, 0), + + /* GSCL Block */ + GATE(CLK_SCLK_GSCL_WA, "sclk_gscl_wa", "mout_user_aclk333_432_gscl", + GATE_TOP_SCLK_GSCL, 6, 0, 0), + GATE(CLK_SCLK_GSCL_WB, "sclk_gscl_wb", "mout_user_aclk333_432_gscl", + GATE_TOP_SCLK_GSCL, 7, 0, 0), GATE(CLK_GSCL0, "gscl0", "aclk300_gscl", GATE_IP_GSCL0, 0, 0, 0), GATE(CLK_GSCL1, "gscl1", "aclk300_gscl", GATE_IP_GSCL0, 1, 0, 0), - GATE(CLK_CLK_3AA, "clk_3aa", "aclk300_gscl", GATE_IP_GSCL0, 4, 0, 0), - - GATE(CLK_SMMU_3AA, "smmu_3aa", "aclk333_432_gscl", GATE_IP_GSCL1, 2, 0, - 0), - GATE(CLK_SMMU_FIMCL0, "smmu_fimcl0", "aclk333_432_gscl", + GATE(CLK_FIMC_3AA, "fimc_3aa", "aclk333_432_gscl", + GATE_IP_GSCL0, 4, 0, 0), + GATE(CLK_FIMC_LITE0, "fimc_lite0", "aclk333_432_gscl", + GATE_IP_GSCL0, 5, 0, 0), + GATE(CLK_FIMC_LITE1, "fimc_lite1", "aclk333_432_gscl", + GATE_IP_GSCL0, 6, 0, 0), + + GATE(CLK_SMMU_3AA, "smmu_3aa", "dout_gscl_blk_333", + GATE_IP_GSCL1, 2, 0, 0), + GATE(CLK_SMMU_FIMCL0, "smmu_fimcl0", "dout_gscl_blk_333", GATE_IP_GSCL1, 3, 0, 0), - GATE(CLK_SMMU_FIMCL1, "smmu_fimcl1", "aclk333_432_gscl", + GATE(CLK_SMMU_FIMCL1, "smmu_fimcl1", "dout_gscl_blk_333", GATE_IP_GSCL1, 4, 0, 0), - GATE(CLK_SMMU_GSCL0, "smmu_gscl0", "aclk300_gscl", GATE_IP_GSCL1, 6, 0, - 0), - GATE(CLK_SMMU_GSCL1, "smmu_gscl1", "aclk300_gscl", GATE_IP_GSCL1, 7, 0, - 0), - GATE(CLK_GSCL_WA, "gscl_wa", "aclk300_gscl", GATE_IP_GSCL1, 12, 0, 0), - GATE(CLK_GSCL_WB, "gscl_wb", "aclk300_gscl", GATE_IP_GSCL1, 13, 0, 0), - GATE(CLK_SMMU_FIMCL3, "smmu_fimcl3,", "aclk333_432_gscl", + GATE(CLK_SMMU_GSCL0, "smmu_gscl0", "dout_gscl_blk_300", + GATE_IP_GSCL1, 6, 0, 0), + GATE(CLK_SMMU_GSCL1, "smmu_gscl1", "dout_gscl_blk_300", + GATE_IP_GSCL1, 7, 0, 0), + GATE(CLK_GSCL_WA, "gscl_wa", "sclk_gscl_wa", GATE_IP_GSCL1, 12, 0, 0), + GATE(CLK_GSCL_WB, "gscl_wb", "sclk_gscl_wb", GATE_IP_GSCL1, 13, 0, 0), + GATE(CLK_SMMU_FIMCL3, "smmu_fimcl3,", "dout_gscl_blk_333", GATE_IP_GSCL1, 16, 0, 0), GATE(CLK_FIMC_LITE3, "fimc_lite3", "aclk333_432_gscl", GATE_IP_GSCL1, 17, 0, 0), + /* MSCL Block */ + GATE(CLK_MSCL0, "mscl0", "aclk400_mscl", GATE_IP_MSCL, 0, 0, 0), + GATE(CLK_MSCL1, "mscl1", "aclk400_mscl", GATE_IP_MSCL, 1, 0, 0), + GATE(CLK_MSCL2, "mscl2", "aclk400_mscl", GATE_IP_MSCL, 2, 0, 0), + GATE(CLK_SMMU_MSCL0, "smmu_mscl0", "dout_mscl_blk", + GATE_IP_MSCL, 8, 0, 0), + GATE(CLK_SMMU_MSCL1, "smmu_mscl1", "dout_mscl_blk", + GATE_IP_MSCL, 9, 0, 0), + GATE(CLK_SMMU_MSCL2, "smmu_mscl2", "dout_mscl_blk", + GATE_IP_MSCL, 10, 0, 0), + GATE(CLK_FIMD1, "fimd1", "aclk300_disp1", GATE_IP_DISP1, 0, 0, 0), GATE(CLK_DSIM1, "dsim1", "aclk200_disp1", GATE_IP_DISP1, 3, 0, 0), GATE(CLK_DP1, "dp1", "aclk200_disp1", GATE_IP_DISP1, 4, 0, 0), - GATE(CLK_MIXER, "mixer", "aclk166", GATE_IP_DISP1, 5, 0, 0), + GATE(CLK_MIXER, "mixer", "aclk200_disp1", GATE_IP_DISP1, 5, 0, 0), GATE(CLK_HDMI, "hdmi", "aclk200_disp1", GATE_IP_DISP1, 6, 0, 0), - GATE(CLK_SMMU_FIMD1, "smmu_fimd1", "aclk300_disp1", GATE_IP_DISP1, 8, 0, - 0), + GATE(CLK_SMMU_FIMD1M0, "smmu_fimd1m0", "dout_disp1_blk", + GATE_IP_DISP1, 7, 0, 0), + GATE(CLK_SMMU_FIMD1M1, "smmu_fimd1m1", "dout_disp1_blk", + GATE_IP_DISP1, 8, 0, 0), + GATE(CLK_SMMU_MIXER, "smmu_mixer", "aclk200_disp1", + GATE_IP_DISP1, 9, 0, 0), + + /* ISP */ + GATE(CLK_SCLK_UART_ISP, "sclk_uart_isp", "dout_uart_isp", + GATE_TOP_SCLK_ISP, 0, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_SPI0_ISP, "sclk_spi0_isp", "dout_spi0_isp_pre", + GATE_TOP_SCLK_ISP, 1, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_SPI1_ISP, "sclk_spi1_isp", "dout_spi1_isp_pre", + GATE_TOP_SCLK_ISP, 2, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_PWM_ISP, "sclk_pwm_isp", "dout_pwm_isp", + GATE_TOP_SCLK_ISP, 3, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_ISP_SENSOR0, "sclk_isp_sensor0", "dout_isp_sensor0", + GATE_TOP_SCLK_ISP, 4, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_ISP_SENSOR1, "sclk_isp_sensor1", "dout_isp_sensor1", + GATE_TOP_SCLK_ISP, 8, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_ISP_SENSOR2, "sclk_isp_sensor2", "dout_isp_sensor2", + GATE_TOP_SCLK_ISP, 12, CLK_SET_RATE_PARENT, 0), GATE(CLK_MFC, "mfc", "aclk333", GATE_IP_MFC, 0, 0, 0), - GATE(CLK_SMMU_MFCL, "smmu_mfcl", "aclk333", GATE_IP_MFC, 1, 0, 0), - GATE(CLK_SMMU_MFCR, "smmu_mfcr", "aclk333", GATE_IP_MFC, 2, 0, 0), - - GATE(CLK_G3D, "g3d", "aclkg3d", GATE_IP_G3D, 9, 0, 0), + GATE(CLK_SMMU_MFCL, "smmu_mfcl", "dout_mfc_blk", GATE_IP_MFC, 1, 0, 0), + GATE(CLK_SMMU_MFCR, "smmu_mfcr", "dout_mfc_blk", GATE_IP_MFC, 2, 0, 0), - GATE(CLK_ROTATOR, "rotator", "aclk266", GATE_IP_GEN, 1, 0, 0), - GATE(CLK_JPEG, "jpeg", "aclk300_jpeg", GATE_IP_GEN, 2, 0, 0), - GATE(CLK_JPEG2, "jpeg2", "aclk300_jpeg", GATE_IP_GEN, 3, 0, 0), - GATE(CLK_MDMA1, "mdma1", "aclk266", GATE_IP_GEN, 4, 0, 0), - GATE(CLK_SMMU_ROTATOR, "smmu_rotator", "aclk266", GATE_IP_GEN, 6, 0, 0), - GATE(CLK_SMMU_JPEG, "smmu_jpeg", "aclk300_jpeg", GATE_IP_GEN, 7, 0, 0), - GATE(CLK_SMMU_MDMA1, "smmu_mdma1", "aclk266", GATE_IP_GEN, 9, 0, 0), - - GATE(CLK_MSCL0, "mscl0", "aclk400_mscl", GATE_IP_MSCL, 0, 0, 0), - GATE(CLK_MSCL1, "mscl1", "aclk400_mscl", GATE_IP_MSCL, 1, 0, 0), - GATE(CLK_MSCL2, "mscl2", "aclk400_mscl", GATE_IP_MSCL, 2, 0, 0), - GATE(CLK_SMMU_MSCL0, "smmu_mscl0", "aclk400_mscl", GATE_IP_MSCL, 8, 0, - 0), - GATE(CLK_SMMU_MSCL1, "smmu_mscl1", "aclk400_mscl", GATE_IP_MSCL, 9, 0, - 0), - GATE(CLK_SMMU_MSCL2, "smmu_mscl2", "aclk400_mscl", GATE_IP_MSCL, 10, 0, - 0), - GATE(CLK_SMMU_MIXER, "smmu_mixer", "aclk200_disp1", GATE_IP_DISP1, 9, 0, - 0), + GATE(CLK_G3D, "g3d", "mout_user_aclk_g3d", GATE_IP_G3D, 9, 0, 0), }; -static struct samsung_pll_clock exynos5420_plls[nr_plls] __initdata = { +static struct samsung_pll_clock exynos5x_plls[nr_plls] __initdata = { [apll] = PLL(pll_2550, CLK_FOUT_APLL, "fout_apll", "fin_pll", APLL_LOCK, APLL_CON0, NULL), [cpll] = PLL(pll_2550, CLK_FOUT_CPLL, "fout_cpll", "fin_pll", CPLL_LOCK, @@ -776,8 +1173,11 @@ static struct of_device_id ext_clk_match[] __initdata = { }; /* register exynos5420 clocks */ -static void __init exynos5420_clk_init(struct device_node *np) +static void __init exynos5x_clk_init(struct device_node *np, + enum exynos5x_soc soc) { + struct samsung_clk_provider *ctx; + if (np) { reg_base = of_iomap(np, 0); if (!reg_base) @@ -786,23 +1186,56 @@ static void __init exynos5420_clk_init(struct device_node *np) panic("%s: unable to determine soc\n", __func__); } - samsung_clk_init(np, reg_base, CLK_NR_CLKS); - samsung_clk_of_register_fixed_ext(exynos5420_fixed_rate_ext_clks, - ARRAY_SIZE(exynos5420_fixed_rate_ext_clks), + exynos5x_soc = soc; + + ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS); + if (!ctx) + panic("%s: unable to allocate context.\n", __func__); + + samsung_clk_of_register_fixed_ext(ctx, exynos5x_fixed_rate_ext_clks, + ARRAY_SIZE(exynos5x_fixed_rate_ext_clks), ext_clk_match); - samsung_clk_register_pll(exynos5420_plls, ARRAY_SIZE(exynos5420_plls), + samsung_clk_register_pll(ctx, exynos5x_plls, ARRAY_SIZE(exynos5x_plls), reg_base); - samsung_clk_register_fixed_rate(exynos5420_fixed_rate_clks, - ARRAY_SIZE(exynos5420_fixed_rate_clks)); - samsung_clk_register_fixed_factor(exynos5420_fixed_factor_clks, - ARRAY_SIZE(exynos5420_fixed_factor_clks)); - samsung_clk_register_mux(exynos5420_mux_clks, - ARRAY_SIZE(exynos5420_mux_clks)); - samsung_clk_register_div(exynos5420_div_clks, - ARRAY_SIZE(exynos5420_div_clks)); - samsung_clk_register_gate(exynos5420_gate_clks, - ARRAY_SIZE(exynos5420_gate_clks)); + samsung_clk_register_fixed_rate(ctx, exynos5x_fixed_rate_clks, + ARRAY_SIZE(exynos5x_fixed_rate_clks)); + samsung_clk_register_fixed_factor(ctx, exynos5x_fixed_factor_clks, + ARRAY_SIZE(exynos5x_fixed_factor_clks)); + samsung_clk_register_mux(ctx, exynos5x_mux_clks, + ARRAY_SIZE(exynos5x_mux_clks)); + samsung_clk_register_div(ctx, exynos5x_div_clks, + ARRAY_SIZE(exynos5x_div_clks)); + samsung_clk_register_gate(ctx, exynos5x_gate_clks, + ARRAY_SIZE(exynos5x_gate_clks)); + + if (soc == EXYNOS5420) { + samsung_clk_register_mux(ctx, exynos5420_mux_clks, + ARRAY_SIZE(exynos5420_mux_clks)); + samsung_clk_register_div(ctx, exynos5420_div_clks, + ARRAY_SIZE(exynos5420_div_clks)); + } else { + samsung_clk_register_fixed_factor( + ctx, exynos5800_fixed_factor_clks, + ARRAY_SIZE(exynos5800_fixed_factor_clks)); + samsung_clk_register_mux(ctx, exynos5800_mux_clks, + ARRAY_SIZE(exynos5800_mux_clks)); + samsung_clk_register_div(ctx, exynos5800_div_clks, + ARRAY_SIZE(exynos5800_div_clks)); + samsung_clk_register_gate(ctx, exynos5800_gate_clks, + ARRAY_SIZE(exynos5800_gate_clks)); + } exynos5420_clk_sleep_init(); } + +static void __init exynos5420_clk_init(struct device_node *np) +{ + exynos5x_clk_init(np, EXYNOS5420); +} CLK_OF_DECLARE(exynos5420_clk, "samsung,exynos5420-clock", exynos5420_clk_init); + +static void __init exynos5800_clk_init(struct device_node *np) +{ + exynos5x_clk_init(np, EXYNOS5800); +} +CLK_OF_DECLARE(exynos5800_clk, "samsung,exynos5800-clock", exynos5800_clk_init); diff --git a/drivers/clk/samsung/clk-exynos5440.c b/drivers/clk/samsung/clk-exynos5440.c index 2bfad5a993d0..647f1440aa6a 100644 --- a/drivers/clk/samsung/clk-exynos5440.c +++ b/drivers/clk/samsung/clk-exynos5440.c @@ -93,6 +93,7 @@ static struct of_device_id ext_clk_match[] __initdata = { static void __init exynos5440_clk_init(struct device_node *np) { void __iomem *reg_base; + struct samsung_clk_provider *ctx; reg_base = of_iomap(np, 0); if (!reg_base) { @@ -101,22 +102,25 @@ static void __init exynos5440_clk_init(struct device_node *np) return; } - samsung_clk_init(np, reg_base, CLK_NR_CLKS); - samsung_clk_of_register_fixed_ext(exynos5440_fixed_rate_ext_clks, + ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS); + if (!ctx) + panic("%s: unable to allocate context.\n", __func__); + + samsung_clk_of_register_fixed_ext(ctx, exynos5440_fixed_rate_ext_clks, ARRAY_SIZE(exynos5440_fixed_rate_ext_clks), ext_clk_match); samsung_clk_register_pll2550x("cplla", "xtal", reg_base + 0x1c, 0x10); samsung_clk_register_pll2550x("cpllb", "xtal", reg_base + 0x20, 0x10); - samsung_clk_register_fixed_rate(exynos5440_fixed_rate_clks, + samsung_clk_register_fixed_rate(ctx, exynos5440_fixed_rate_clks, ARRAY_SIZE(exynos5440_fixed_rate_clks)); - samsung_clk_register_fixed_factor(exynos5440_fixed_factor_clks, + samsung_clk_register_fixed_factor(ctx, exynos5440_fixed_factor_clks, ARRAY_SIZE(exynos5440_fixed_factor_clks)); - samsung_clk_register_mux(exynos5440_mux_clks, + samsung_clk_register_mux(ctx, exynos5440_mux_clks, ARRAY_SIZE(exynos5440_mux_clks)); - samsung_clk_register_div(exynos5440_div_clks, + samsung_clk_register_div(ctx, exynos5440_div_clks, ARRAY_SIZE(exynos5440_div_clks)); - samsung_clk_register_gate(exynos5440_gate_clks, + samsung_clk_register_gate(ctx, exynos5440_gate_clks, ARRAY_SIZE(exynos5440_gate_clks)); pr_info("Exynos5440: arm_clk = %ldHz\n", _get_rate("arm_clk")); diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c index 81e6d2f49aa0..b07fad2a9167 100644 --- a/drivers/clk/samsung/clk-pll.c +++ b/drivers/clk/samsung/clk-pll.c @@ -11,6 +11,7 @@ #include <linux/errno.h> #include <linux/hrtimer.h> +#include <linux/delay.h> #include "clk.h" #include "clk-pll.h" @@ -59,6 +60,72 @@ static long samsung_pll_round_rate(struct clk_hw *hw, } /* + * PLL2126 Clock Type + */ + +#define PLL2126_MDIV_MASK (0xff) +#define PLL2126_PDIV_MASK (0x3f) +#define PLL2126_SDIV_MASK (0x3) +#define PLL2126_MDIV_SHIFT (16) +#define PLL2126_PDIV_SHIFT (8) +#define PLL2126_SDIV_SHIFT (0) + +static unsigned long samsung_pll2126_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + u32 pll_con, mdiv, pdiv, sdiv; + u64 fvco = parent_rate; + + pll_con = __raw_readl(pll->con_reg); + mdiv = (pll_con >> PLL2126_MDIV_SHIFT) & PLL2126_MDIV_MASK; + pdiv = (pll_con >> PLL2126_PDIV_SHIFT) & PLL2126_PDIV_MASK; + sdiv = (pll_con >> PLL2126_SDIV_SHIFT) & PLL2126_SDIV_MASK; + + fvco *= (mdiv + 8); + do_div(fvco, (pdiv + 2) << sdiv); + + return (unsigned long)fvco; +} + +static const struct clk_ops samsung_pll2126_clk_ops = { + .recalc_rate = samsung_pll2126_recalc_rate, +}; + +/* + * PLL3000 Clock Type + */ + +#define PLL3000_MDIV_MASK (0xff) +#define PLL3000_PDIV_MASK (0x3) +#define PLL3000_SDIV_MASK (0x3) +#define PLL3000_MDIV_SHIFT (16) +#define PLL3000_PDIV_SHIFT (8) +#define PLL3000_SDIV_SHIFT (0) + +static unsigned long samsung_pll3000_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + u32 pll_con, mdiv, pdiv, sdiv; + u64 fvco = parent_rate; + + pll_con = __raw_readl(pll->con_reg); + mdiv = (pll_con >> PLL3000_MDIV_SHIFT) & PLL3000_MDIV_MASK; + pdiv = (pll_con >> PLL3000_PDIV_SHIFT) & PLL3000_PDIV_MASK; + sdiv = (pll_con >> PLL3000_SDIV_SHIFT) & PLL3000_SDIV_MASK; + + fvco *= (2 * (mdiv + 8)); + do_div(fvco, pdiv << sdiv); + + return (unsigned long)fvco; +} + +static const struct clk_ops samsung_pll3000_clk_ops = { + .recalc_rate = samsung_pll3000_recalc_rate, +}; + +/* * PLL35xx Clock Type */ /* Maximum lock time can be 270 * PDIV cycles */ @@ -564,7 +631,9 @@ static const struct clk_ops samsung_pll46xx_clk_min_ops = { #define PLL6552_PDIV_MASK 0x3f #define PLL6552_SDIV_MASK 0x7 #define PLL6552_MDIV_SHIFT 16 +#define PLL6552_MDIV_SHIFT_2416 14 #define PLL6552_PDIV_SHIFT 8 +#define PLL6552_PDIV_SHIFT_2416 5 #define PLL6552_SDIV_SHIFT 0 static unsigned long samsung_pll6552_recalc_rate(struct clk_hw *hw, @@ -575,8 +644,13 @@ static unsigned long samsung_pll6552_recalc_rate(struct clk_hw *hw, u64 fvco = parent_rate; pll_con = __raw_readl(pll->con_reg); - mdiv = (pll_con >> PLL6552_MDIV_SHIFT) & PLL6552_MDIV_MASK; - pdiv = (pll_con >> PLL6552_PDIV_SHIFT) & PLL6552_PDIV_MASK; + if (pll->type == pll_6552_s3c2416) { + mdiv = (pll_con >> PLL6552_MDIV_SHIFT_2416) & PLL6552_MDIV_MASK; + pdiv = (pll_con >> PLL6552_PDIV_SHIFT_2416) & PLL6552_PDIV_MASK; + } else { + mdiv = (pll_con >> PLL6552_MDIV_SHIFT) & PLL6552_MDIV_MASK; + pdiv = (pll_con >> PLL6552_PDIV_SHIFT) & PLL6552_PDIV_MASK; + } sdiv = (pll_con >> PLL6552_SDIV_SHIFT) & PLL6552_SDIV_MASK; fvco *= mdiv; @@ -628,6 +702,169 @@ static const struct clk_ops samsung_pll6553_clk_ops = { }; /* + * PLL Clock Type of S3C24XX before S3C2443 + */ + +#define PLLS3C2410_MDIV_MASK (0xff) +#define PLLS3C2410_PDIV_MASK (0x1f) +#define PLLS3C2410_SDIV_MASK (0x3) +#define PLLS3C2410_MDIV_SHIFT (12) +#define PLLS3C2410_PDIV_SHIFT (4) +#define PLLS3C2410_SDIV_SHIFT (0) + +#define PLLS3C2410_ENABLE_REG_OFFSET 0x10 + +static unsigned long samsung_s3c2410_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + u32 pll_con, mdiv, pdiv, sdiv; + u64 fvco = parent_rate; + + pll_con = __raw_readl(pll->con_reg); + mdiv = (pll_con >> PLLS3C2410_MDIV_SHIFT) & PLLS3C2410_MDIV_MASK; + pdiv = (pll_con >> PLLS3C2410_PDIV_SHIFT) & PLLS3C2410_PDIV_MASK; + sdiv = (pll_con >> PLLS3C2410_SDIV_SHIFT) & PLLS3C2410_SDIV_MASK; + + fvco *= (mdiv + 8); + do_div(fvco, (pdiv + 2) << sdiv); + + return (unsigned int)fvco; +} + +static unsigned long samsung_s3c2440_mpll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + u32 pll_con, mdiv, pdiv, sdiv; + u64 fvco = parent_rate; + + pll_con = __raw_readl(pll->con_reg); + mdiv = (pll_con >> PLLS3C2410_MDIV_SHIFT) & PLLS3C2410_MDIV_MASK; + pdiv = (pll_con >> PLLS3C2410_PDIV_SHIFT) & PLLS3C2410_PDIV_MASK; + sdiv = (pll_con >> PLLS3C2410_SDIV_SHIFT) & PLLS3C2410_SDIV_MASK; + + fvco *= (2 * (mdiv + 8)); + do_div(fvco, (pdiv + 2) << sdiv); + + return (unsigned int)fvco; +} + +static int samsung_s3c2410_pll_set_rate(struct clk_hw *hw, unsigned long drate, + unsigned long prate) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + const struct samsung_pll_rate_table *rate; + u32 tmp; + + /* Get required rate settings from table */ + rate = samsung_get_pll_settings(pll, drate); + if (!rate) { + pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, + drate, __clk_get_name(hw->clk)); + return -EINVAL; + } + + tmp = __raw_readl(pll->con_reg); + + /* Change PLL PMS values */ + tmp &= ~((PLLS3C2410_MDIV_MASK << PLLS3C2410_MDIV_SHIFT) | + (PLLS3C2410_PDIV_MASK << PLLS3C2410_PDIV_SHIFT) | + (PLLS3C2410_SDIV_MASK << PLLS3C2410_SDIV_SHIFT)); + tmp |= (rate->mdiv << PLLS3C2410_MDIV_SHIFT) | + (rate->pdiv << PLLS3C2410_PDIV_SHIFT) | + (rate->sdiv << PLLS3C2410_SDIV_SHIFT); + __raw_writel(tmp, pll->con_reg); + + /* Time to settle according to the manual */ + udelay(300); + + return 0; +} + +static int samsung_s3c2410_pll_enable(struct clk_hw *hw, int bit, bool enable) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + u32 pll_en = __raw_readl(pll->lock_reg + PLLS3C2410_ENABLE_REG_OFFSET); + u32 pll_en_orig = pll_en; + + if (enable) + pll_en &= ~BIT(bit); + else + pll_en |= BIT(bit); + + __raw_writel(pll_en, pll->lock_reg + PLLS3C2410_ENABLE_REG_OFFSET); + + /* if we started the UPLL, then allow to settle */ + if (enable && (pll_en_orig & BIT(bit))) + udelay(300); + + return 0; +} + +static int samsung_s3c2410_mpll_enable(struct clk_hw *hw) +{ + return samsung_s3c2410_pll_enable(hw, 5, true); +} + +static void samsung_s3c2410_mpll_disable(struct clk_hw *hw) +{ + samsung_s3c2410_pll_enable(hw, 5, false); +} + +static int samsung_s3c2410_upll_enable(struct clk_hw *hw) +{ + return samsung_s3c2410_pll_enable(hw, 7, true); +} + +static void samsung_s3c2410_upll_disable(struct clk_hw *hw) +{ + samsung_s3c2410_pll_enable(hw, 7, false); +} + +static const struct clk_ops samsung_s3c2410_mpll_clk_min_ops = { + .recalc_rate = samsung_s3c2410_pll_recalc_rate, + .enable = samsung_s3c2410_mpll_enable, + .disable = samsung_s3c2410_mpll_disable, +}; + +static const struct clk_ops samsung_s3c2410_upll_clk_min_ops = { + .recalc_rate = samsung_s3c2410_pll_recalc_rate, + .enable = samsung_s3c2410_upll_enable, + .disable = samsung_s3c2410_upll_disable, +}; + +static const struct clk_ops samsung_s3c2440_mpll_clk_min_ops = { + .recalc_rate = samsung_s3c2440_mpll_recalc_rate, + .enable = samsung_s3c2410_mpll_enable, + .disable = samsung_s3c2410_mpll_disable, +}; + +static const struct clk_ops samsung_s3c2410_mpll_clk_ops = { + .recalc_rate = samsung_s3c2410_pll_recalc_rate, + .enable = samsung_s3c2410_mpll_enable, + .disable = samsung_s3c2410_mpll_disable, + .round_rate = samsung_pll_round_rate, + .set_rate = samsung_s3c2410_pll_set_rate, +}; + +static const struct clk_ops samsung_s3c2410_upll_clk_ops = { + .recalc_rate = samsung_s3c2410_pll_recalc_rate, + .enable = samsung_s3c2410_upll_enable, + .disable = samsung_s3c2410_upll_disable, + .round_rate = samsung_pll_round_rate, + .set_rate = samsung_s3c2410_pll_set_rate, +}; + +static const struct clk_ops samsung_s3c2440_mpll_clk_ops = { + .recalc_rate = samsung_s3c2440_mpll_recalc_rate, + .enable = samsung_s3c2410_mpll_enable, + .disable = samsung_s3c2410_mpll_disable, + .round_rate = samsung_pll_round_rate, + .set_rate = samsung_s3c2410_pll_set_rate, +}; + +/* * PLL2550x Clock Type */ @@ -710,8 +947,206 @@ struct clk * __init samsung_clk_register_pll2550x(const char *name, return clk; } -static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk, - void __iomem *base) +/* + * PLL2550xx Clock Type + */ + +/* Maximum lock time can be 270 * PDIV cycles */ +#define PLL2550XX_LOCK_FACTOR 270 + +#define PLL2550XX_M_MASK 0x3FF +#define PLL2550XX_P_MASK 0x3F +#define PLL2550XX_S_MASK 0x7 +#define PLL2550XX_LOCK_STAT_MASK 0x1 +#define PLL2550XX_M_SHIFT 9 +#define PLL2550XX_P_SHIFT 3 +#define PLL2550XX_S_SHIFT 0 +#define PLL2550XX_LOCK_STAT_SHIFT 21 + +static unsigned long samsung_pll2550xx_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + u32 mdiv, pdiv, sdiv, pll_con; + u64 fvco = parent_rate; + + pll_con = __raw_readl(pll->con_reg); + mdiv = (pll_con >> PLL2550XX_M_SHIFT) & PLL2550XX_M_MASK; + pdiv = (pll_con >> PLL2550XX_P_SHIFT) & PLL2550XX_P_MASK; + sdiv = (pll_con >> PLL2550XX_S_SHIFT) & PLL2550XX_S_MASK; + + fvco *= mdiv; + do_div(fvco, (pdiv << sdiv)); + + return (unsigned long)fvco; +} + +static inline bool samsung_pll2550xx_mp_change(u32 mdiv, u32 pdiv, u32 pll_con) +{ + u32 old_mdiv, old_pdiv; + + old_mdiv = (pll_con >> PLL2550XX_M_SHIFT) & PLL2550XX_M_MASK; + old_pdiv = (pll_con >> PLL2550XX_P_SHIFT) & PLL2550XX_P_MASK; + + return mdiv != old_mdiv || pdiv != old_pdiv; +} + +static int samsung_pll2550xx_set_rate(struct clk_hw *hw, unsigned long drate, + unsigned long prate) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + const struct samsung_pll_rate_table *rate; + u32 tmp; + + /* Get required rate settings from table */ + rate = samsung_get_pll_settings(pll, drate); + if (!rate) { + pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, + drate, __clk_get_name(hw->clk)); + return -EINVAL; + } + + tmp = __raw_readl(pll->con_reg); + + if (!(samsung_pll2550xx_mp_change(rate->mdiv, rate->pdiv, tmp))) { + /* If only s change, change just s value only*/ + tmp &= ~(PLL2550XX_S_MASK << PLL2550XX_S_SHIFT); + tmp |= rate->sdiv << PLL2550XX_S_SHIFT; + __raw_writel(tmp, pll->con_reg); + + return 0; + } + + /* Set PLL lock time. */ + __raw_writel(rate->pdiv * PLL2550XX_LOCK_FACTOR, pll->lock_reg); + + /* Change PLL PMS values */ + tmp &= ~((PLL2550XX_M_MASK << PLL2550XX_M_SHIFT) | + (PLL2550XX_P_MASK << PLL2550XX_P_SHIFT) | + (PLL2550XX_S_MASK << PLL2550XX_S_SHIFT)); + tmp |= (rate->mdiv << PLL2550XX_M_SHIFT) | + (rate->pdiv << PLL2550XX_P_SHIFT) | + (rate->sdiv << PLL2550XX_S_SHIFT); + __raw_writel(tmp, pll->con_reg); + + /* wait_lock_time */ + do { + cpu_relax(); + tmp = __raw_readl(pll->con_reg); + } while (!(tmp & (PLL2550XX_LOCK_STAT_MASK + << PLL2550XX_LOCK_STAT_SHIFT))); + + return 0; +} + +static const struct clk_ops samsung_pll2550xx_clk_ops = { + .recalc_rate = samsung_pll2550xx_recalc_rate, + .round_rate = samsung_pll_round_rate, + .set_rate = samsung_pll2550xx_set_rate, +}; + +static const struct clk_ops samsung_pll2550xx_clk_min_ops = { + .recalc_rate = samsung_pll2550xx_recalc_rate, +}; + +/* + * PLL2650XX Clock Type + */ + +/* Maximum lock time can be 3000 * PDIV cycles */ +#define PLL2650XX_LOCK_FACTOR 3000 + +#define PLL2650XX_MDIV_SHIFT 9 +#define PLL2650XX_PDIV_SHIFT 3 +#define PLL2650XX_SDIV_SHIFT 0 +#define PLL2650XX_KDIV_SHIFT 0 +#define PLL2650XX_MDIV_MASK 0x1ff +#define PLL2650XX_PDIV_MASK 0x3f +#define PLL2650XX_SDIV_MASK 0x7 +#define PLL2650XX_KDIV_MASK 0xffff +#define PLL2650XX_PLL_ENABLE_SHIFT 23 +#define PLL2650XX_PLL_LOCKTIME_SHIFT 21 +#define PLL2650XX_PLL_FOUTMASK_SHIFT 31 + +static unsigned long samsung_pll2650xx_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + u32 mdiv, pdiv, sdiv, pll_con0, pll_con2; + s16 kdiv; + u64 fvco = parent_rate; + + pll_con0 = __raw_readl(pll->con_reg); + pll_con2 = __raw_readl(pll->con_reg + 8); + mdiv = (pll_con0 >> PLL2650XX_MDIV_SHIFT) & PLL2650XX_MDIV_MASK; + pdiv = (pll_con0 >> PLL2650XX_PDIV_SHIFT) & PLL2650XX_PDIV_MASK; + sdiv = (pll_con0 >> PLL2650XX_SDIV_SHIFT) & PLL2650XX_SDIV_MASK; + kdiv = (s16)(pll_con2 & PLL2650XX_KDIV_MASK); + + fvco *= (mdiv << 16) + kdiv; + do_div(fvco, (pdiv << sdiv)); + fvco >>= 16; + + return (unsigned long)fvco; +} + +static int samsung_pll2650xx_set_rate(struct clk_hw *hw, unsigned long drate, + unsigned long parent_rate) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + u32 tmp, pll_con0, pll_con2; + const struct samsung_pll_rate_table *rate; + + rate = samsung_get_pll_settings(pll, drate); + if (!rate) { + pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, + drate, __clk_get_name(hw->clk)); + return -EINVAL; + } + + pll_con0 = __raw_readl(pll->con_reg); + pll_con2 = __raw_readl(pll->con_reg + 8); + + /* Change PLL PMS values */ + pll_con0 &= ~(PLL2650XX_MDIV_MASK << PLL2650XX_MDIV_SHIFT | + PLL2650XX_PDIV_MASK << PLL2650XX_PDIV_SHIFT | + PLL2650XX_SDIV_MASK << PLL2650XX_SDIV_SHIFT); + pll_con0 |= rate->mdiv << PLL2650XX_MDIV_SHIFT; + pll_con0 |= rate->pdiv << PLL2650XX_PDIV_SHIFT; + pll_con0 |= rate->sdiv << PLL2650XX_SDIV_SHIFT; + pll_con0 |= 1 << PLL2650XX_PLL_ENABLE_SHIFT; + pll_con0 |= 1 << PLL2650XX_PLL_FOUTMASK_SHIFT; + + pll_con2 &= ~(PLL2650XX_KDIV_MASK << PLL2650XX_KDIV_SHIFT); + pll_con2 |= ((~(rate->kdiv) + 1) & PLL2650XX_KDIV_MASK) + << PLL2650XX_KDIV_SHIFT; + + /* Set PLL lock time. */ + __raw_writel(PLL2650XX_LOCK_FACTOR * rate->pdiv, pll->lock_reg); + + __raw_writel(pll_con0, pll->con_reg); + __raw_writel(pll_con2, pll->con_reg + 8); + + do { + tmp = __raw_readl(pll->con_reg); + } while (!(tmp & (0x1 << PLL2650XX_PLL_LOCKTIME_SHIFT))); + + return 0; +} + +static const struct clk_ops samsung_pll2650xx_clk_ops = { + .recalc_rate = samsung_pll2650xx_recalc_rate, + .set_rate = samsung_pll2650xx_set_rate, + .round_rate = samsung_pll_round_rate, +}; + +static const struct clk_ops samsung_pll2650xx_clk_min_ops = { + .recalc_rate = samsung_pll2650xx_recalc_rate, +}; + +static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx, + struct samsung_pll_clock *pll_clk, + void __iomem *base) { struct samsung_clk_pll *pll; struct clk *clk; @@ -746,6 +1181,12 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk, } switch (pll_clk->type) { + case pll_2126: + init.ops = &samsung_pll2126_clk_ops; + break; + case pll_3000: + init.ops = &samsung_pll3000_clk_ops; + break; /* clk_ops for 35xx and 2550 are similar */ case pll_35xx: case pll_2550: @@ -773,6 +1214,7 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk, init.ops = &samsung_pll36xx_clk_ops; break; case pll_6552: + case pll_6552_s3c2416: init.ops = &samsung_pll6552_clk_ops; break; case pll_6553: @@ -786,6 +1228,36 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk, else init.ops = &samsung_pll46xx_clk_ops; break; + case pll_s3c2410_mpll: + if (!pll->rate_table) + init.ops = &samsung_s3c2410_mpll_clk_min_ops; + else + init.ops = &samsung_s3c2410_mpll_clk_ops; + break; + case pll_s3c2410_upll: + if (!pll->rate_table) + init.ops = &samsung_s3c2410_upll_clk_min_ops; + else + init.ops = &samsung_s3c2410_upll_clk_ops; + break; + case pll_s3c2440_mpll: + if (!pll->rate_table) + init.ops = &samsung_s3c2440_mpll_clk_min_ops; + else + init.ops = &samsung_s3c2440_mpll_clk_ops; + break; + case pll_2550xx: + if (!pll->rate_table) + init.ops = &samsung_pll2550xx_clk_min_ops; + else + init.ops = &samsung_pll2550xx_clk_ops; + break; + case pll_2650xx: + if (!pll->rate_table) + init.ops = &samsung_pll2650xx_clk_min_ops; + else + init.ops = &samsung_pll2650xx_clk_ops; + break; default: pr_warn("%s: Unknown pll type for pll clk %s\n", __func__, pll_clk->name); @@ -804,7 +1276,7 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk, return; } - samsung_clk_add_lookup(clk, pll_clk->id); + samsung_clk_add_lookup(ctx, clk, pll_clk->id); if (!pll_clk->alias) return; @@ -815,11 +1287,12 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk, __func__, pll_clk->name, ret); } -void __init samsung_clk_register_pll(struct samsung_pll_clock *pll_list, - unsigned int nr_pll, void __iomem *base) +void __init samsung_clk_register_pll(struct samsung_clk_provider *ctx, + struct samsung_pll_clock *pll_list, + unsigned int nr_pll, void __iomem *base) { int cnt; for (cnt = 0; cnt < nr_pll; cnt++) - _samsung_clk_register_pll(&pll_list[cnt], base); + _samsung_clk_register_pll(ctx, &pll_list[cnt], base); } diff --git a/drivers/clk/samsung/clk-pll.h b/drivers/clk/samsung/clk-pll.h index 6c39030080fb..c0ed4d41fd90 100644 --- a/drivers/clk/samsung/clk-pll.h +++ b/drivers/clk/samsung/clk-pll.h @@ -13,6 +13,8 @@ #define __SAMSUNG_CLK_PLL_H enum samsung_pll_type { + pll_2126, + pll_3000, pll_35xx, pll_36xx, pll_2550, @@ -24,7 +26,13 @@ enum samsung_pll_type { pll_4650, pll_4650c, pll_6552, + pll_6552_s3c2416, pll_6553, + pll_s3c2410_mpll, + pll_s3c2410_upll, + pll_s3c2440_mpll, + pll_2550xx, + pll_2650xx, }; #define PLL_35XX_RATE(_rate, _m, _p, _s) \ diff --git a/drivers/clk/samsung/clk-s3c2410-dclk.c b/drivers/clk/samsung/clk-s3c2410-dclk.c new file mode 100644 index 000000000000..8d8dff005c10 --- /dev/null +++ b/drivers/clk/samsung/clk-s3c2410-dclk.c @@ -0,0 +1,440 @@ +/* + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common Clock Framework support for s3c24xx external clock output. + */ + +#include <linux/platform_device.h> +#include <linux/module.h> +#include "clk.h" + +/* legacy access to misccr, until dt conversion is finished */ +#include <mach/hardware.h> +#include <mach/regs-gpio.h> + +#define MUX_DCLK0 0 +#define MUX_DCLK1 1 +#define DIV_DCLK0 2 +#define DIV_DCLK1 3 +#define GATE_DCLK0 4 +#define GATE_DCLK1 5 +#define MUX_CLKOUT0 6 +#define MUX_CLKOUT1 7 +#define DCLK_MAX_CLKS (MUX_CLKOUT1 + 1) + +enum supported_socs { + S3C2410, + S3C2412, + S3C2440, + S3C2443, +}; + +struct s3c24xx_dclk_drv_data { + const char **clkout0_parent_names; + int clkout0_num_parents; + const char **clkout1_parent_names; + int clkout1_num_parents; + const char **mux_parent_names; + int mux_num_parents; +}; + +/* + * Clock for output-parent selection in misccr + */ + +struct s3c24xx_clkout { + struct clk_hw hw; + u32 mask; + u8 shift; +}; + +#define to_s3c24xx_clkout(_hw) container_of(_hw, struct s3c24xx_clkout, hw) + +static u8 s3c24xx_clkout_get_parent(struct clk_hw *hw) +{ + struct s3c24xx_clkout *clkout = to_s3c24xx_clkout(hw); + int num_parents = __clk_get_num_parents(hw->clk); + u32 val; + + val = readl_relaxed(S3C24XX_MISCCR) >> clkout->shift; + val >>= clkout->shift; + val &= clkout->mask; + + if (val >= num_parents) + return -EINVAL; + + return val; +} + +static int s3c24xx_clkout_set_parent(struct clk_hw *hw, u8 index) +{ + struct s3c24xx_clkout *clkout = to_s3c24xx_clkout(hw); + int ret = 0; + + s3c2410_modify_misccr((clkout->mask << clkout->shift), + (index << clkout->shift)); + + return ret; +} + +const struct clk_ops s3c24xx_clkout_ops = { + .get_parent = s3c24xx_clkout_get_parent, + .set_parent = s3c24xx_clkout_set_parent, + .determine_rate = __clk_mux_determine_rate, +}; + +struct clk *s3c24xx_register_clkout(struct device *dev, const char *name, + const char **parent_names, u8 num_parents, + u8 shift, u32 mask) +{ + struct s3c24xx_clkout *clkout; + struct clk *clk; + struct clk_init_data init; + + /* allocate the clkout */ + clkout = kzalloc(sizeof(*clkout), GFP_KERNEL); + if (!clkout) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &s3c24xx_clkout_ops; + init.flags = CLK_IS_BASIC; + init.parent_names = parent_names; + init.num_parents = num_parents; + + clkout->shift = shift; + clkout->mask = mask; + clkout->hw.init = &init; + + clk = clk_register(dev, &clkout->hw); + + return clk; +} + +/* + * dclk and clkout init + */ + +struct s3c24xx_dclk { + struct device *dev; + void __iomem *base; + struct clk_onecell_data clk_data; + struct notifier_block dclk0_div_change_nb; + struct notifier_block dclk1_div_change_nb; + spinlock_t dclk_lock; + unsigned long reg_save; +}; + +#define to_s3c24xx_dclk0(x) \ + container_of(x, struct s3c24xx_dclk, dclk0_div_change_nb) + +#define to_s3c24xx_dclk1(x) \ + container_of(x, struct s3c24xx_dclk, dclk1_div_change_nb) + +PNAME(dclk_s3c2410_p) = { "pclk", "uclk" }; +PNAME(clkout0_s3c2410_p) = { "mpll", "upll", "fclk", "hclk", "pclk", + "gate_dclk0" }; +PNAME(clkout1_s3c2410_p) = { "mpll", "upll", "fclk", "hclk", "pclk", + "gate_dclk1" }; + +PNAME(clkout0_s3c2412_p) = { "mpll", "upll", "rtc_clkout", + "hclk", "pclk", "gate_dclk0" }; +PNAME(clkout1_s3c2412_p) = { "xti", "upll", "fclk", "hclk", "pclk", + "gate_dclk1" }; + +PNAME(clkout0_s3c2440_p) = { "xti", "upll", "fclk", "hclk", "pclk", + "gate_dclk0" }; +PNAME(clkout1_s3c2440_p) = { "mpll", "upll", "rtc_clkout", + "hclk", "pclk", "gate_dclk1" }; + +PNAME(dclk_s3c2443_p) = { "pclk", "epll" }; +PNAME(clkout0_s3c2443_p) = { "xti", "epll", "armclk", "hclk", "pclk", + "gate_dclk0" }; +PNAME(clkout1_s3c2443_p) = { "dummy", "epll", "rtc_clkout", + "hclk", "pclk", "gate_dclk1" }; + +#define DCLKCON_DCLK_DIV_MASK 0xf +#define DCLKCON_DCLK0_DIV_SHIFT 4 +#define DCLKCON_DCLK0_CMP_SHIFT 8 +#define DCLKCON_DCLK1_DIV_SHIFT 20 +#define DCLKCON_DCLK1_CMP_SHIFT 24 + +static void s3c24xx_dclk_update_cmp(struct s3c24xx_dclk *s3c24xx_dclk, + int div_shift, int cmp_shift) +{ + unsigned long flags = 0; + u32 dclk_con, div, cmp; + + spin_lock_irqsave(&s3c24xx_dclk->dclk_lock, flags); + + dclk_con = readl_relaxed(s3c24xx_dclk->base); + + div = ((dclk_con >> div_shift) & DCLKCON_DCLK_DIV_MASK) + 1; + cmp = ((div + 1) / 2) - 1; + + dclk_con &= ~(DCLKCON_DCLK_DIV_MASK << cmp_shift); + dclk_con |= (cmp << cmp_shift); + + writel_relaxed(dclk_con, s3c24xx_dclk->base); + + spin_unlock_irqrestore(&s3c24xx_dclk->dclk_lock, flags); +} + +static int s3c24xx_dclk0_div_notify(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct s3c24xx_dclk *s3c24xx_dclk = to_s3c24xx_dclk0(nb); + + if (event == POST_RATE_CHANGE) { + s3c24xx_dclk_update_cmp(s3c24xx_dclk, + DCLKCON_DCLK0_DIV_SHIFT, DCLKCON_DCLK0_CMP_SHIFT); + } + + return NOTIFY_DONE; +} + +static int s3c24xx_dclk1_div_notify(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct s3c24xx_dclk *s3c24xx_dclk = to_s3c24xx_dclk1(nb); + + if (event == POST_RATE_CHANGE) { + s3c24xx_dclk_update_cmp(s3c24xx_dclk, + DCLKCON_DCLK1_DIV_SHIFT, DCLKCON_DCLK1_CMP_SHIFT); + } + + return NOTIFY_DONE; +} + +#ifdef CONFIG_PM_SLEEP +static int s3c24xx_dclk_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct s3c24xx_dclk *s3c24xx_dclk = platform_get_drvdata(pdev); + + s3c24xx_dclk->reg_save = readl_relaxed(s3c24xx_dclk->base); + return 0; +} + +static int s3c24xx_dclk_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct s3c24xx_dclk *s3c24xx_dclk = platform_get_drvdata(pdev); + + writel_relaxed(s3c24xx_dclk->reg_save, s3c24xx_dclk->base); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(s3c24xx_dclk_pm_ops, + s3c24xx_dclk_suspend, s3c24xx_dclk_resume); + +static int s3c24xx_dclk_probe(struct platform_device *pdev) +{ + struct s3c24xx_dclk *s3c24xx_dclk; + struct resource *mem; + struct clk **clk_table; + struct s3c24xx_dclk_drv_data *dclk_variant; + int ret, i; + + s3c24xx_dclk = devm_kzalloc(&pdev->dev, sizeof(*s3c24xx_dclk), + GFP_KERNEL); + if (!s3c24xx_dclk) + return -ENOMEM; + + s3c24xx_dclk->dev = &pdev->dev; + platform_set_drvdata(pdev, s3c24xx_dclk); + spin_lock_init(&s3c24xx_dclk->dclk_lock); + + clk_table = devm_kzalloc(&pdev->dev, + sizeof(struct clk *) * DCLK_MAX_CLKS, + GFP_KERNEL); + if (!clk_table) + return -ENOMEM; + + s3c24xx_dclk->clk_data.clks = clk_table; + s3c24xx_dclk->clk_data.clk_num = DCLK_MAX_CLKS; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + s3c24xx_dclk->base = devm_ioremap_resource(&pdev->dev, mem); + if (IS_ERR(s3c24xx_dclk->base)) + return PTR_ERR(s3c24xx_dclk->base); + + dclk_variant = (struct s3c24xx_dclk_drv_data *) + platform_get_device_id(pdev)->driver_data; + + + clk_table[MUX_DCLK0] = clk_register_mux(&pdev->dev, "mux_dclk0", + dclk_variant->mux_parent_names, + dclk_variant->mux_num_parents, 0, + s3c24xx_dclk->base, 1, 1, 0, + &s3c24xx_dclk->dclk_lock); + clk_table[MUX_DCLK1] = clk_register_mux(&pdev->dev, "mux_dclk1", + dclk_variant->mux_parent_names, + dclk_variant->mux_num_parents, 0, + s3c24xx_dclk->base, 17, 1, 0, + &s3c24xx_dclk->dclk_lock); + + clk_table[DIV_DCLK0] = clk_register_divider(&pdev->dev, "div_dclk0", + "mux_dclk0", 0, s3c24xx_dclk->base, + 4, 4, 0, &s3c24xx_dclk->dclk_lock); + clk_table[DIV_DCLK1] = clk_register_divider(&pdev->dev, "div_dclk1", + "mux_dclk1", 0, s3c24xx_dclk->base, + 20, 4, 0, &s3c24xx_dclk->dclk_lock); + + clk_table[GATE_DCLK0] = clk_register_gate(&pdev->dev, "gate_dclk0", + "div_dclk0", CLK_SET_RATE_PARENT, + s3c24xx_dclk->base, 0, 0, + &s3c24xx_dclk->dclk_lock); + clk_table[GATE_DCLK1] = clk_register_gate(&pdev->dev, "gate_dclk1", + "div_dclk1", CLK_SET_RATE_PARENT, + s3c24xx_dclk->base, 16, 0, + &s3c24xx_dclk->dclk_lock); + + clk_table[MUX_CLKOUT0] = s3c24xx_register_clkout(&pdev->dev, + "clkout0", dclk_variant->clkout0_parent_names, + dclk_variant->clkout0_num_parents, 4, 7); + clk_table[MUX_CLKOUT1] = s3c24xx_register_clkout(&pdev->dev, + "clkout1", dclk_variant->clkout1_parent_names, + dclk_variant->clkout1_num_parents, 8, 7); + + for (i = 0; i < DCLK_MAX_CLKS; i++) + if (IS_ERR(clk_table[i])) { + dev_err(&pdev->dev, "clock %d failed to register\n", i); + ret = PTR_ERR(clk_table[i]); + goto err_clk_register; + } + + ret = clk_register_clkdev(clk_table[MUX_DCLK0], "dclk0", NULL); + if (!ret) + ret = clk_register_clkdev(clk_table[MUX_DCLK1], "dclk1", NULL); + if (!ret) + ret = clk_register_clkdev(clk_table[MUX_CLKOUT0], + "clkout0", NULL); + if (!ret) + ret = clk_register_clkdev(clk_table[MUX_CLKOUT1], + "clkout1", NULL); + if (ret) { + dev_err(&pdev->dev, "failed to register aliases, %d\n", ret); + goto err_clk_register; + } + + s3c24xx_dclk->dclk0_div_change_nb.notifier_call = + s3c24xx_dclk0_div_notify; + + s3c24xx_dclk->dclk1_div_change_nb.notifier_call = + s3c24xx_dclk1_div_notify; + + ret = clk_notifier_register(clk_table[DIV_DCLK0], + &s3c24xx_dclk->dclk0_div_change_nb); + if (ret) + goto err_clk_register; + + ret = clk_notifier_register(clk_table[DIV_DCLK1], + &s3c24xx_dclk->dclk1_div_change_nb); + if (ret) + goto err_dclk_notify; + + return 0; + +err_dclk_notify: + clk_notifier_unregister(clk_table[DIV_DCLK0], + &s3c24xx_dclk->dclk0_div_change_nb); +err_clk_register: + for (i = 0; i < DCLK_MAX_CLKS; i++) + if (clk_table[i] && !IS_ERR(clk_table[i])) + clk_unregister(clk_table[i]); + + return ret; +} + +static int s3c24xx_dclk_remove(struct platform_device *pdev) +{ + struct s3c24xx_dclk *s3c24xx_dclk = platform_get_drvdata(pdev); + struct clk **clk_table = s3c24xx_dclk->clk_data.clks; + int i; + + clk_notifier_unregister(clk_table[DIV_DCLK1], + &s3c24xx_dclk->dclk1_div_change_nb); + clk_notifier_unregister(clk_table[DIV_DCLK0], + &s3c24xx_dclk->dclk0_div_change_nb); + + for (i = 0; i < DCLK_MAX_CLKS; i++) + clk_unregister(clk_table[i]); + + return 0; +} + +static struct s3c24xx_dclk_drv_data dclk_variants[] = { + [S3C2410] = { + .clkout0_parent_names = clkout0_s3c2410_p, + .clkout0_num_parents = ARRAY_SIZE(clkout0_s3c2410_p), + .clkout1_parent_names = clkout1_s3c2410_p, + .clkout1_num_parents = ARRAY_SIZE(clkout1_s3c2410_p), + .mux_parent_names = dclk_s3c2410_p, + .mux_num_parents = ARRAY_SIZE(dclk_s3c2410_p), + }, + [S3C2412] = { + .clkout0_parent_names = clkout0_s3c2412_p, + .clkout0_num_parents = ARRAY_SIZE(clkout0_s3c2412_p), + .clkout1_parent_names = clkout1_s3c2412_p, + .clkout1_num_parents = ARRAY_SIZE(clkout1_s3c2412_p), + .mux_parent_names = dclk_s3c2410_p, + .mux_num_parents = ARRAY_SIZE(dclk_s3c2410_p), + }, + [S3C2440] = { + .clkout0_parent_names = clkout0_s3c2440_p, + .clkout0_num_parents = ARRAY_SIZE(clkout0_s3c2440_p), + .clkout1_parent_names = clkout1_s3c2440_p, + .clkout1_num_parents = ARRAY_SIZE(clkout1_s3c2440_p), + .mux_parent_names = dclk_s3c2410_p, + .mux_num_parents = ARRAY_SIZE(dclk_s3c2410_p), + }, + [S3C2443] = { + .clkout0_parent_names = clkout0_s3c2443_p, + .clkout0_num_parents = ARRAY_SIZE(clkout0_s3c2443_p), + .clkout1_parent_names = clkout1_s3c2443_p, + .clkout1_num_parents = ARRAY_SIZE(clkout1_s3c2443_p), + .mux_parent_names = dclk_s3c2443_p, + .mux_num_parents = ARRAY_SIZE(dclk_s3c2443_p), + }, +}; + +static struct platform_device_id s3c24xx_dclk_driver_ids[] = { + { + .name = "s3c2410-dclk", + .driver_data = (kernel_ulong_t)&dclk_variants[S3C2410], + }, { + .name = "s3c2412-dclk", + .driver_data = (kernel_ulong_t)&dclk_variants[S3C2412], + }, { + .name = "s3c2440-dclk", + .driver_data = (kernel_ulong_t)&dclk_variants[S3C2440], + }, { + .name = "s3c2443-dclk", + .driver_data = (kernel_ulong_t)&dclk_variants[S3C2443], + }, + { } +}; + +MODULE_DEVICE_TABLE(platform, s3c24xx_dclk_driver_ids); + +static struct platform_driver s3c24xx_dclk_driver = { + .driver = { + .name = "s3c24xx-dclk", + .owner = THIS_MODULE, + .pm = &s3c24xx_dclk_pm_ops, + }, + .probe = s3c24xx_dclk_probe, + .remove = s3c24xx_dclk_remove, + .id_table = s3c24xx_dclk_driver_ids, +}; +module_platform_driver(s3c24xx_dclk_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>"); +MODULE_DESCRIPTION("Driver for the S3C24XX external clock outputs"); diff --git a/drivers/clk/samsung/clk-s3c2410.c b/drivers/clk/samsung/clk-s3c2410.c new file mode 100644 index 000000000000..ba0716801db2 --- /dev/null +++ b/drivers/clk/samsung/clk-s3c2410.c @@ -0,0 +1,482 @@ +/* + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common Clock Framework support for S3C2410 and following SoCs. + */ + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/syscore_ops.h> + +#include <dt-bindings/clock/s3c2410.h> + +#include "clk.h" +#include "clk-pll.h" + +#define LOCKTIME 0x00 +#define MPLLCON 0x04 +#define UPLLCON 0x08 +#define CLKCON 0x0c +#define CLKSLOW 0x10 +#define CLKDIVN 0x14 +#define CAMDIVN 0x18 + +/* the soc types */ +enum supported_socs { + S3C2410, + S3C2440, + S3C2442, +}; + +/* list of PLLs to be registered */ +enum s3c2410_plls { + mpll, upll, +}; + +static void __iomem *reg_base; + +#ifdef CONFIG_PM_SLEEP +static struct samsung_clk_reg_dump *s3c2410_save; + +/* + * list of controller registers to be saved and restored during a + * suspend/resume cycle. + */ +static unsigned long s3c2410_clk_regs[] __initdata = { + LOCKTIME, + MPLLCON, + UPLLCON, + CLKCON, + CLKSLOW, + CLKDIVN, + CAMDIVN, +}; + +static int s3c2410_clk_suspend(void) +{ + samsung_clk_save(reg_base, s3c2410_save, + ARRAY_SIZE(s3c2410_clk_regs)); + + return 0; +} + +static void s3c2410_clk_resume(void) +{ + samsung_clk_restore(reg_base, s3c2410_save, + ARRAY_SIZE(s3c2410_clk_regs)); +} + +static struct syscore_ops s3c2410_clk_syscore_ops = { + .suspend = s3c2410_clk_suspend, + .resume = s3c2410_clk_resume, +}; + +static void s3c2410_clk_sleep_init(void) +{ + s3c2410_save = samsung_clk_alloc_reg_dump(s3c2410_clk_regs, + ARRAY_SIZE(s3c2410_clk_regs)); + if (!s3c2410_save) { + pr_warn("%s: failed to allocate sleep save data, no sleep support!\n", + __func__); + return; + } + + register_syscore_ops(&s3c2410_clk_syscore_ops); + return; +} +#else +static void s3c2410_clk_sleep_init(void) {} +#endif + +PNAME(fclk_p) = { "mpll", "div_slow" }; + +struct samsung_mux_clock s3c2410_common_muxes[] __initdata = { + MUX(FCLK, "fclk", fclk_p, CLKSLOW, 4, 1), +}; + +static struct clk_div_table divslow_d[] = { + { .val = 0, .div = 1 }, + { .val = 1, .div = 2 }, + { .val = 2, .div = 4 }, + { .val = 3, .div = 6 }, + { .val = 4, .div = 8 }, + { .val = 5, .div = 10 }, + { .val = 6, .div = 12 }, + { .val = 7, .div = 14 }, + { /* sentinel */ }, +}; + +struct samsung_div_clock s3c2410_common_dividers[] __initdata = { + DIV_T(0, "div_slow", "xti", CLKSLOW, 0, 3, divslow_d), + DIV(PCLK, "pclk", "hclk", CLKDIVN, 0, 1), +}; + +struct samsung_gate_clock s3c2410_common_gates[] __initdata = { + GATE(PCLK_SPI, "spi", "pclk", CLKCON, 18, 0, 0), + GATE(PCLK_I2S, "i2s", "pclk", CLKCON, 17, 0, 0), + GATE(PCLK_I2C, "i2c", "pclk", CLKCON, 16, 0, 0), + GATE(PCLK_ADC, "adc", "pclk", CLKCON, 15, 0, 0), + GATE(PCLK_RTC, "rtc", "pclk", CLKCON, 14, 0, 0), + GATE(PCLK_GPIO, "gpio", "pclk", CLKCON, 13, CLK_IGNORE_UNUSED, 0), + GATE(PCLK_UART2, "uart2", "pclk", CLKCON, 12, 0, 0), + GATE(PCLK_UART1, "uart1", "pclk", CLKCON, 11, 0, 0), + GATE(PCLK_UART0, "uart0", "pclk", CLKCON, 10, 0, 0), + GATE(PCLK_SDI, "sdi", "pclk", CLKCON, 9, 0, 0), + GATE(PCLK_PWM, "pwm", "pclk", CLKCON, 8, 0, 0), + GATE(HCLK_USBD, "usb-device", "hclk", CLKCON, 7, 0, 0), + GATE(HCLK_USBH, "usb-host", "hclk", CLKCON, 6, 0, 0), + GATE(HCLK_LCD, "lcd", "hclk", CLKCON, 5, 0, 0), + GATE(HCLK_NAND, "nand", "hclk", CLKCON, 4, 0, 0), +}; + +/* should be added _after_ the soc-specific clocks are created */ +struct samsung_clock_alias s3c2410_common_aliases[] __initdata = { + ALIAS(PCLK_I2C, "s3c2410-i2c.0", "i2c"), + ALIAS(PCLK_ADC, NULL, "adc"), + ALIAS(PCLK_RTC, NULL, "rtc"), + ALIAS(PCLK_PWM, NULL, "timers"), + ALIAS(HCLK_LCD, NULL, "lcd"), + ALIAS(HCLK_USBD, NULL, "usb-device"), + ALIAS(HCLK_USBH, NULL, "usb-host"), + ALIAS(UCLK, NULL, "usb-bus-host"), + ALIAS(UCLK, NULL, "usb-bus-gadget"), + ALIAS(ARMCLK, NULL, "armclk"), + ALIAS(UCLK, NULL, "uclk"), + ALIAS(HCLK, NULL, "hclk"), + ALIAS(MPLL, NULL, "mpll"), + ALIAS(FCLK, NULL, "fclk"), +}; + +/* S3C2410 specific clocks */ + +static struct samsung_pll_rate_table pll_s3c2410_12mhz_tbl[] __initdata = { + /* sorted in descending order */ + /* 2410A extras */ + PLL_35XX_RATE(270000000, 127, 1, 1), + PLL_35XX_RATE(268000000, 126, 1, 1), + PLL_35XX_RATE(266000000, 125, 1, 1), + PLL_35XX_RATE(226000000, 105, 1, 1), + PLL_35XX_RATE(210000000, 132, 2, 1), + /* 2410 common */ + PLL_35XX_RATE(203000000, 161, 3, 1), + PLL_35XX_RATE(192000000, 88, 1, 1), + PLL_35XX_RATE(186000000, 85, 1, 1), + PLL_35XX_RATE(180000000, 82, 1, 1), + PLL_35XX_RATE(170000000, 77, 1, 1), + PLL_35XX_RATE(158000000, 71, 1, 1), + PLL_35XX_RATE(152000000, 68, 1, 1), + PLL_35XX_RATE(147000000, 90, 2, 1), + PLL_35XX_RATE(135000000, 82, 2, 1), + PLL_35XX_RATE(124000000, 116, 1, 2), + PLL_35XX_RATE(118000000, 150, 2, 2), + PLL_35XX_RATE(113000000, 105, 1, 2), + PLL_35XX_RATE(101000000, 127, 2, 2), + PLL_35XX_RATE(90000000, 112, 2, 2), + PLL_35XX_RATE(85000000, 105, 2, 2), + PLL_35XX_RATE(79000000, 71, 1, 2), + PLL_35XX_RATE(68000000, 82, 2, 2), + PLL_35XX_RATE(56000000, 142, 2, 3), + PLL_35XX_RATE(48000000, 120, 2, 3), + PLL_35XX_RATE(51000000, 161, 3, 3), + PLL_35XX_RATE(45000000, 82, 1, 3), + PLL_35XX_RATE(34000000, 82, 2, 3), + { /* sentinel */ }, +}; + +static struct samsung_pll_clock s3c2410_plls[] __initdata = { + [mpll] = PLL(pll_s3c2410_mpll, MPLL, "mpll", "xti", + LOCKTIME, MPLLCON, NULL), + [upll] = PLL(pll_s3c2410_upll, UPLL, "upll", "xti", + LOCKTIME, UPLLCON, NULL), +}; + +struct samsung_div_clock s3c2410_dividers[] __initdata = { + DIV(HCLK, "hclk", "mpll", CLKDIVN, 1, 1), +}; + +struct samsung_fixed_factor_clock s3c2410_ffactor[] __initdata = { + /* + * armclk is directly supplied by the fclk, without + * switching possibility like on the s3c244x below. + */ + FFACTOR(ARMCLK, "armclk", "fclk", 1, 1, 0), + + /* uclk is fed from the unmodified upll */ + FFACTOR(UCLK, "uclk", "upll", 1, 1, 0), +}; + +struct samsung_clock_alias s3c2410_aliases[] __initdata = { + ALIAS(PCLK_UART0, "s3c2410-uart.0", "uart"), + ALIAS(PCLK_UART1, "s3c2410-uart.1", "uart"), + ALIAS(PCLK_UART2, "s3c2410-uart.2", "uart"), + ALIAS(PCLK_UART0, "s3c2410-uart.0", "clk_uart_baud0"), + ALIAS(PCLK_UART1, "s3c2410-uart.1", "clk_uart_baud0"), + ALIAS(PCLK_UART2, "s3c2410-uart.2", "clk_uart_baud0"), + ALIAS(UCLK, NULL, "clk_uart_baud1"), +}; + +/* S3C244x specific clocks */ + +static struct samsung_pll_rate_table pll_s3c244x_12mhz_tbl[] __initdata = { + /* sorted in descending order */ + PLL_35XX_RATE(400000000, 0x5c, 1, 1), + PLL_35XX_RATE(390000000, 0x7a, 2, 1), + PLL_35XX_RATE(380000000, 0x57, 1, 1), + PLL_35XX_RATE(370000000, 0xb1, 4, 1), + PLL_35XX_RATE(360000000, 0x70, 2, 1), + PLL_35XX_RATE(350000000, 0xa7, 4, 1), + PLL_35XX_RATE(340000000, 0x4d, 1, 1), + PLL_35XX_RATE(330000000, 0x66, 2, 1), + PLL_35XX_RATE(320000000, 0x98, 4, 1), + PLL_35XX_RATE(310000000, 0x93, 4, 1), + PLL_35XX_RATE(300000000, 0x75, 3, 1), + PLL_35XX_RATE(240000000, 0x70, 1, 2), + PLL_35XX_RATE(230000000, 0x6b, 1, 2), + PLL_35XX_RATE(220000000, 0x66, 1, 2), + PLL_35XX_RATE(210000000, 0x84, 2, 2), + PLL_35XX_RATE(200000000, 0x5c, 1, 2), + PLL_35XX_RATE(190000000, 0x57, 1, 2), + PLL_35XX_RATE(180000000, 0x70, 2, 2), + PLL_35XX_RATE(170000000, 0x4d, 1, 2), + PLL_35XX_RATE(160000000, 0x98, 4, 2), + PLL_35XX_RATE(150000000, 0x75, 3, 2), + PLL_35XX_RATE(120000000, 0x70, 1, 3), + PLL_35XX_RATE(110000000, 0x66, 1, 3), + PLL_35XX_RATE(100000000, 0x5c, 1, 3), + PLL_35XX_RATE(90000000, 0x70, 2, 3), + PLL_35XX_RATE(80000000, 0x98, 4, 3), + PLL_35XX_RATE(75000000, 0x75, 3, 3), + { /* sentinel */ }, +}; + +static struct samsung_pll_clock s3c244x_common_plls[] __initdata = { + [mpll] = PLL(pll_s3c2440_mpll, MPLL, "mpll", "xti", + LOCKTIME, MPLLCON, NULL), + [upll] = PLL(pll_s3c2410_upll, UPLL, "upll", "xti", + LOCKTIME, UPLLCON, NULL), +}; + +PNAME(hclk_p) = { "fclk", "div_hclk_2", "div_hclk_4", "div_hclk_3" }; +PNAME(armclk_p) = { "fclk", "hclk" }; + +struct samsung_mux_clock s3c244x_common_muxes[] __initdata = { + MUX(HCLK, "hclk", hclk_p, CLKDIVN, 1, 2), + MUX(ARMCLK, "armclk", armclk_p, CAMDIVN, 12, 1), +}; + +struct samsung_fixed_factor_clock s3c244x_common_ffactor[] __initdata = { + FFACTOR(0, "div_hclk_2", "fclk", 1, 2, 0), + FFACTOR(0, "ff_cam", "div_cam", 2, 1, CLK_SET_RATE_PARENT), +}; + +static struct clk_div_table div_hclk_4_d[] = { + { .val = 0, .div = 4 }, + { .val = 1, .div = 8 }, + { /* sentinel */ }, +}; + +static struct clk_div_table div_hclk_3_d[] = { + { .val = 0, .div = 3 }, + { .val = 1, .div = 6 }, + { /* sentinel */ }, +}; + +struct samsung_div_clock s3c244x_common_dividers[] __initdata = { + DIV(UCLK, "uclk", "upll", CLKDIVN, 3, 1), + DIV(0, "div_hclk", "fclk", CLKDIVN, 1, 1), + DIV_T(0, "div_hclk_4", "fclk", CAMDIVN, 9, 1, div_hclk_4_d), + DIV_T(0, "div_hclk_3", "fclk", CAMDIVN, 8, 1, div_hclk_3_d), + DIV(0, "div_cam", "upll", CAMDIVN, 0, 3), +}; + +struct samsung_gate_clock s3c244x_common_gates[] __initdata = { + GATE(HCLK_CAM, "cam", "hclk", CLKCON, 19, 0, 0), +}; + +struct samsung_clock_alias s3c244x_common_aliases[] __initdata = { + ALIAS(PCLK_UART0, "s3c2440-uart.0", "uart"), + ALIAS(PCLK_UART1, "s3c2440-uart.1", "uart"), + ALIAS(PCLK_UART2, "s3c2440-uart.2", "uart"), + ALIAS(PCLK_UART0, "s3c2440-uart.0", "clk_uart_baud2"), + ALIAS(PCLK_UART1, "s3c2440-uart.1", "clk_uart_baud2"), + ALIAS(PCLK_UART2, "s3c2440-uart.2", "clk_uart_baud2"), + ALIAS(HCLK_CAM, NULL, "camif"), + ALIAS(CAMIF, NULL, "camif-upll"), +}; + +/* S3C2440 specific clocks */ + +PNAME(s3c2440_camif_p) = { "upll", "ff_cam" }; + +struct samsung_mux_clock s3c2440_muxes[] __initdata = { + MUX(CAMIF, "camif", s3c2440_camif_p, CAMDIVN, 4, 1), +}; + +struct samsung_gate_clock s3c2440_gates[] __initdata = { + GATE(PCLK_AC97, "ac97", "pclk", CLKCON, 20, 0, 0), +}; + +/* S3C2442 specific clocks */ + +struct samsung_fixed_factor_clock s3c2442_ffactor[] __initdata = { + FFACTOR(0, "upll_3", "upll", 1, 3, 0), +}; + +PNAME(s3c2442_camif_p) = { "upll", "ff_cam", "upll", "upll_3" }; + +struct samsung_mux_clock s3c2442_muxes[] __initdata = { + MUX(CAMIF, "camif", s3c2442_camif_p, CAMDIVN, 4, 2), +}; + +/* + * fixed rate clocks generated outside the soc + * Only necessary until the devicetree-move is complete + */ +#define XTI 1 +struct samsung_fixed_rate_clock s3c2410_common_frate_clks[] __initdata = { + FRATE(XTI, "xti", NULL, CLK_IS_ROOT, 0), +}; + +static void __init s3c2410_common_clk_register_fixed_ext( + struct samsung_clk_provider *ctx, + unsigned long xti_f) +{ + struct samsung_clock_alias xti_alias = ALIAS(XTI, NULL, "xtal"); + + s3c2410_common_frate_clks[0].fixed_rate = xti_f; + samsung_clk_register_fixed_rate(ctx, s3c2410_common_frate_clks, + ARRAY_SIZE(s3c2410_common_frate_clks)); + + samsung_clk_register_alias(ctx, &xti_alias, 1); +} + +void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f, + int current_soc, + void __iomem *base) +{ + struct samsung_clk_provider *ctx; + reg_base = base; + + if (np) { + reg_base = of_iomap(np, 0); + if (!reg_base) + panic("%s: failed to map registers\n", __func__); + } + + ctx = samsung_clk_init(np, reg_base, NR_CLKS); + if (!ctx) + panic("%s: unable to allocate context.\n", __func__); + + /* Register external clocks only in non-dt cases */ + if (!np) + s3c2410_common_clk_register_fixed_ext(ctx, xti_f); + + if (current_soc == 2410) { + if (_get_rate("xti") == 12 * MHZ) { + s3c2410_plls[mpll].rate_table = pll_s3c2410_12mhz_tbl; + s3c2410_plls[upll].rate_table = pll_s3c2410_12mhz_tbl; + } + + /* Register PLLs. */ + samsung_clk_register_pll(ctx, s3c2410_plls, + ARRAY_SIZE(s3c2410_plls), reg_base); + + } else { /* S3C2440, S3C2442 */ + if (_get_rate("xti") == 12 * MHZ) { + /* + * plls follow different calculation schemes, with the + * upll following the same scheme as the s3c2410 plls + */ + s3c244x_common_plls[mpll].rate_table = + pll_s3c244x_12mhz_tbl; + s3c244x_common_plls[upll].rate_table = + pll_s3c2410_12mhz_tbl; + } + + /* Register PLLs. */ + samsung_clk_register_pll(ctx, s3c244x_common_plls, + ARRAY_SIZE(s3c244x_common_plls), reg_base); + } + + /* Register common internal clocks. */ + samsung_clk_register_mux(ctx, s3c2410_common_muxes, + ARRAY_SIZE(s3c2410_common_muxes)); + samsung_clk_register_div(ctx, s3c2410_common_dividers, + ARRAY_SIZE(s3c2410_common_dividers)); + samsung_clk_register_gate(ctx, s3c2410_common_gates, + ARRAY_SIZE(s3c2410_common_gates)); + + if (current_soc == S3C2440 || current_soc == S3C2442) { + samsung_clk_register_div(ctx, s3c244x_common_dividers, + ARRAY_SIZE(s3c244x_common_dividers)); + samsung_clk_register_gate(ctx, s3c244x_common_gates, + ARRAY_SIZE(s3c244x_common_gates)); + samsung_clk_register_mux(ctx, s3c244x_common_muxes, + ARRAY_SIZE(s3c244x_common_muxes)); + samsung_clk_register_fixed_factor(ctx, s3c244x_common_ffactor, + ARRAY_SIZE(s3c244x_common_ffactor)); + } + + /* Register SoC-specific clocks. */ + switch (current_soc) { + case S3C2410: + samsung_clk_register_div(ctx, s3c2410_dividers, + ARRAY_SIZE(s3c2410_dividers)); + samsung_clk_register_fixed_factor(ctx, s3c2410_ffactor, + ARRAY_SIZE(s3c2410_ffactor)); + samsung_clk_register_alias(ctx, s3c2410_aliases, + ARRAY_SIZE(s3c2410_common_aliases)); + break; + case S3C2440: + samsung_clk_register_mux(ctx, s3c2440_muxes, + ARRAY_SIZE(s3c2440_muxes)); + samsung_clk_register_gate(ctx, s3c2440_gates, + ARRAY_SIZE(s3c2440_gates)); + break; + case S3C2442: + samsung_clk_register_mux(ctx, s3c2442_muxes, + ARRAY_SIZE(s3c2442_muxes)); + samsung_clk_register_fixed_factor(ctx, s3c2442_ffactor, + ARRAY_SIZE(s3c2442_ffactor)); + break; + } + + /* + * Register common aliases at the end, as some of the aliased clocks + * are SoC specific. + */ + samsung_clk_register_alias(ctx, s3c2410_common_aliases, + ARRAY_SIZE(s3c2410_common_aliases)); + + if (current_soc == S3C2440 || current_soc == S3C2442) { + samsung_clk_register_alias(ctx, s3c244x_common_aliases, + ARRAY_SIZE(s3c244x_common_aliases)); + } + + s3c2410_clk_sleep_init(); +} + +static void __init s3c2410_clk_init(struct device_node *np) +{ + s3c2410_common_clk_init(np, 0, S3C2410, 0); +} +CLK_OF_DECLARE(s3c2410_clk, "samsung,s3c2410-clock", s3c2410_clk_init); + +static void __init s3c2440_clk_init(struct device_node *np) +{ + s3c2410_common_clk_init(np, 0, S3C2440, 0); +} +CLK_OF_DECLARE(s3c2440_clk, "samsung,s3c2440-clock", s3c2440_clk_init); + +static void __init s3c2442_clk_init(struct device_node *np) +{ + s3c2410_common_clk_init(np, 0, S3C2442, 0); +} +CLK_OF_DECLARE(s3c2442_clk, "samsung,s3c2442-clock", s3c2442_clk_init); diff --git a/drivers/clk/samsung/clk-s3c2412.c b/drivers/clk/samsung/clk-s3c2412.c new file mode 100644 index 000000000000..23e4313f625e --- /dev/null +++ b/drivers/clk/samsung/clk-s3c2412.c @@ -0,0 +1,274 @@ +/* + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common Clock Framework support for S3C2412 and S3C2413. + */ + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/syscore_ops.h> + +#include <dt-bindings/clock/s3c2412.h> + +#include "clk.h" +#include "clk-pll.h" + +#define LOCKTIME 0x00 +#define MPLLCON 0x04 +#define UPLLCON 0x08 +#define CLKCON 0x0c +#define CLKDIVN 0x14 +#define CLKSRC 0x1c + +/* list of PLLs to be registered */ +enum s3c2412_plls { + mpll, upll, +}; + +static void __iomem *reg_base; + +#ifdef CONFIG_PM_SLEEP +static struct samsung_clk_reg_dump *s3c2412_save; + +/* + * list of controller registers to be saved and restored during a + * suspend/resume cycle. + */ +static unsigned long s3c2412_clk_regs[] __initdata = { + LOCKTIME, + MPLLCON, + UPLLCON, + CLKCON, + CLKDIVN, + CLKSRC, +}; + +static int s3c2412_clk_suspend(void) +{ + samsung_clk_save(reg_base, s3c2412_save, + ARRAY_SIZE(s3c2412_clk_regs)); + + return 0; +} + +static void s3c2412_clk_resume(void) +{ + samsung_clk_restore(reg_base, s3c2412_save, + ARRAY_SIZE(s3c2412_clk_regs)); +} + +static struct syscore_ops s3c2412_clk_syscore_ops = { + .suspend = s3c2412_clk_suspend, + .resume = s3c2412_clk_resume, +}; + +static void s3c2412_clk_sleep_init(void) +{ + s3c2412_save = samsung_clk_alloc_reg_dump(s3c2412_clk_regs, + ARRAY_SIZE(s3c2412_clk_regs)); + if (!s3c2412_save) { + pr_warn("%s: failed to allocate sleep save data, no sleep support!\n", + __func__); + return; + } + + register_syscore_ops(&s3c2412_clk_syscore_ops); + return; +} +#else +static void s3c2412_clk_sleep_init(void) {} +#endif + +static struct clk_div_table divxti_d[] = { + { .val = 0, .div = 1 }, + { .val = 1, .div = 2 }, + { .val = 2, .div = 4 }, + { .val = 3, .div = 6 }, + { .val = 4, .div = 8 }, + { .val = 5, .div = 10 }, + { .val = 6, .div = 12 }, + { .val = 7, .div = 14 }, + { /* sentinel */ }, +}; + +struct samsung_div_clock s3c2412_dividers[] __initdata = { + DIV_T(0, "div_xti", "xti", CLKSRC, 0, 3, divxti_d), + DIV(0, "div_cam", "mux_cam", CLKDIVN, 16, 4), + DIV(0, "div_i2s", "mux_i2s", CLKDIVN, 12, 4), + DIV(0, "div_uart", "mux_uart", CLKDIVN, 8, 4), + DIV(0, "div_usb", "mux_usb", CLKDIVN, 6, 1), + DIV(0, "div_hclk_half", "hclk", CLKDIVN, 5, 1), + DIV(ARMDIV, "armdiv", "msysclk", CLKDIVN, 3, 1), + DIV(PCLK, "pclk", "hclk", CLKDIVN, 2, 1), + DIV(HCLK, "hclk", "armdiv", CLKDIVN, 0, 2), +}; + +struct samsung_fixed_factor_clock s3c2412_ffactor[] __initdata = { + FFACTOR(0, "ff_hclk", "hclk", 2, 1, CLK_SET_RATE_PARENT), +}; + +/* + * The first two use the OM[4] setting, which is not readable from + * software, so assume it is set to xti. + */ +PNAME(erefclk_p) = { "xti", "xti", "xti", "ext" }; +PNAME(urefclk_p) = { "xti", "xti", "xti", "ext" }; + +PNAME(camclk_p) = { "usysclk", "hclk" }; +PNAME(usbclk_p) = { "usysclk", "hclk" }; +PNAME(i2sclk_p) = { "erefclk", "mpll" }; +PNAME(uartclk_p) = { "erefclk", "mpll" }; +PNAME(usysclk_p) = { "urefclk", "upll" }; +PNAME(msysclk_p) = { "mdivclk", "mpll" }; +PNAME(mdivclk_p) = { "xti", "div_xti" }; +PNAME(armclk_p) = { "armdiv", "hclk" }; + +struct samsung_mux_clock s3c2412_muxes[] __initdata = { + MUX(0, "erefclk", erefclk_p, CLKSRC, 14, 2), + MUX(0, "urefclk", urefclk_p, CLKSRC, 12, 2), + MUX(0, "mux_cam", camclk_p, CLKSRC, 11, 1), + MUX(0, "mux_usb", usbclk_p, CLKSRC, 10, 1), + MUX(0, "mux_i2s", i2sclk_p, CLKSRC, 9, 1), + MUX(0, "mux_uart", uartclk_p, CLKSRC, 8, 1), + MUX(USYSCLK, "usysclk", usysclk_p, CLKSRC, 5, 1), + MUX(MSYSCLK, "msysclk", msysclk_p, CLKSRC, 4, 1), + MUX(MDIVCLK, "mdivclk", mdivclk_p, CLKSRC, 3, 1), + MUX(ARMCLK, "armclk", armclk_p, CLKDIVN, 4, 1), +}; + +static struct samsung_pll_clock s3c2412_plls[] __initdata = { + [mpll] = PLL(pll_s3c2440_mpll, MPLL, "mpll", "xti", + LOCKTIME, MPLLCON, NULL), + [upll] = PLL(pll_s3c2410_upll, UPLL, "upll", "urefclk", + LOCKTIME, UPLLCON, NULL), +}; + +struct samsung_gate_clock s3c2412_gates[] __initdata = { + GATE(PCLK_WDT, "wdt", "pclk", CLKCON, 28, 0, 0), + GATE(PCLK_SPI, "spi", "pclk", CLKCON, 27, 0, 0), + GATE(PCLK_I2S, "i2s", "pclk", CLKCON, 26, 0, 0), + GATE(PCLK_I2C, "i2c", "pclk", CLKCON, 25, 0, 0), + GATE(PCLK_ADC, "adc", "pclk", CLKCON, 24, 0, 0), + GATE(PCLK_RTC, "rtc", "pclk", CLKCON, 23, 0, 0), + GATE(PCLK_GPIO, "gpio", "pclk", CLKCON, 22, CLK_IGNORE_UNUSED, 0), + GATE(PCLK_UART2, "uart2", "pclk", CLKCON, 21, 0, 0), + GATE(PCLK_UART1, "uart1", "pclk", CLKCON, 20, 0, 0), + GATE(PCLK_UART0, "uart0", "pclk", CLKCON, 19, 0, 0), + GATE(PCLK_SDI, "sdi", "pclk", CLKCON, 18, 0, 0), + GATE(PCLK_PWM, "pwm", "pclk", CLKCON, 17, 0, 0), + GATE(PCLK_USBD, "usb-device", "pclk", CLKCON, 16, 0, 0), + GATE(SCLK_CAM, "sclk_cam", "div_cam", CLKCON, 15, 0, 0), + GATE(SCLK_UART, "sclk_uart", "div_uart", CLKCON, 14, 0, 0), + GATE(SCLK_I2S, "sclk_i2s", "div_i2s", CLKCON, 13, 0, 0), + GATE(SCLK_USBH, "sclk_usbh", "div_usb", CLKCON, 12, 0, 0), + GATE(SCLK_USBD, "sclk_usbd", "div_usb", CLKCON, 11, 0, 0), + GATE(HCLK_HALF, "hclk_half", "div_hclk_half", CLKCON, 10, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_X2, "hclkx2", "ff_hclk", CLKCON, 9, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_SDRAM, "sdram", "hclk", CLKCON, 8, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_USBH, "usb-host", "hclk", CLKCON, 6, 0, 0), + GATE(HCLK_LCD, "lcd", "hclk", CLKCON, 5, 0, 0), + GATE(HCLK_NAND, "nand", "hclk", CLKCON, 4, 0, 0), + GATE(HCLK_DMA3, "dma3", "hclk", CLKCON, 3, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_DMA2, "dma2", "hclk", CLKCON, 2, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_DMA1, "dma1", "hclk", CLKCON, 1, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_DMA0, "dma0", "hclk", CLKCON, 0, CLK_IGNORE_UNUSED, 0), +}; + +struct samsung_clock_alias s3c2412_aliases[] __initdata = { + ALIAS(PCLK_UART0, "s3c2412-uart.0", "uart"), + ALIAS(PCLK_UART1, "s3c2412-uart.1", "uart"), + ALIAS(PCLK_UART2, "s3c2412-uart.2", "uart"), + ALIAS(PCLK_UART0, "s3c2412-uart.0", "clk_uart_baud2"), + ALIAS(PCLK_UART1, "s3c2412-uart.1", "clk_uart_baud2"), + ALIAS(PCLK_UART2, "s3c2412-uart.2", "clk_uart_baud2"), + ALIAS(SCLK_UART, NULL, "clk_uart_baud3"), + ALIAS(PCLK_I2C, "s3c2410-i2c.0", "i2c"), + ALIAS(PCLK_ADC, NULL, "adc"), + ALIAS(PCLK_RTC, NULL, "rtc"), + ALIAS(PCLK_PWM, NULL, "timers"), + ALIAS(HCLK_LCD, NULL, "lcd"), + ALIAS(PCLK_USBD, NULL, "usb-device"), + ALIAS(SCLK_USBD, NULL, "usb-bus-gadget"), + ALIAS(HCLK_USBH, NULL, "usb-host"), + ALIAS(SCLK_USBH, NULL, "usb-bus-host"), + ALIAS(ARMCLK, NULL, "armclk"), + ALIAS(HCLK, NULL, "hclk"), + ALIAS(MPLL, NULL, "mpll"), + ALIAS(MSYSCLK, NULL, "fclk"), +}; + +/* + * fixed rate clocks generated outside the soc + * Only necessary until the devicetree-move is complete + */ +#define XTI 1 +struct samsung_fixed_rate_clock s3c2412_common_frate_clks[] __initdata = { + FRATE(XTI, "xti", NULL, CLK_IS_ROOT, 0), + FRATE(0, "ext", NULL, CLK_IS_ROOT, 0), +}; + +static void __init s3c2412_common_clk_register_fixed_ext( + struct samsung_clk_provider *ctx, + unsigned long xti_f, unsigned long ext_f) +{ + /* xtal alias is necessary for the current cpufreq driver */ + struct samsung_clock_alias xti_alias = ALIAS(XTI, NULL, "xtal"); + + s3c2412_common_frate_clks[0].fixed_rate = xti_f; + s3c2412_common_frate_clks[1].fixed_rate = ext_f; + samsung_clk_register_fixed_rate(ctx, s3c2412_common_frate_clks, + ARRAY_SIZE(s3c2412_common_frate_clks)); + + samsung_clk_register_alias(ctx, &xti_alias, 1); +} + +void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f, + unsigned long ext_f, void __iomem *base) +{ + struct samsung_clk_provider *ctx; + reg_base = base; + + if (np) { + reg_base = of_iomap(np, 0); + if (!reg_base) + panic("%s: failed to map registers\n", __func__); + } + + ctx = samsung_clk_init(np, reg_base, NR_CLKS); + if (!ctx) + panic("%s: unable to allocate context.\n", __func__); + + /* Register external clocks only in non-dt cases */ + if (!np) + s3c2412_common_clk_register_fixed_ext(ctx, xti_f, ext_f); + + /* Register PLLs. */ + samsung_clk_register_pll(ctx, s3c2412_plls, ARRAY_SIZE(s3c2412_plls), + reg_base); + + /* Register common internal clocks. */ + samsung_clk_register_mux(ctx, s3c2412_muxes, ARRAY_SIZE(s3c2412_muxes)); + samsung_clk_register_div(ctx, s3c2412_dividers, + ARRAY_SIZE(s3c2412_dividers)); + samsung_clk_register_gate(ctx, s3c2412_gates, + ARRAY_SIZE(s3c2412_gates)); + samsung_clk_register_fixed_factor(ctx, s3c2412_ffactor, + ARRAY_SIZE(s3c2412_ffactor)); + samsung_clk_register_alias(ctx, s3c2412_aliases, + ARRAY_SIZE(s3c2412_aliases)); + + s3c2412_clk_sleep_init(); +} + +static void __init s3c2412_clk_init(struct device_node *np) +{ + s3c2412_common_clk_init(np, 0, 0, 0); +} +CLK_OF_DECLARE(s3c2412_clk, "samsung,s3c2412-clock", s3c2412_clk_init); diff --git a/drivers/clk/samsung/clk-s3c2443.c b/drivers/clk/samsung/clk-s3c2443.c new file mode 100644 index 000000000000..c4bbdabebaa4 --- /dev/null +++ b/drivers/clk/samsung/clk-s3c2443.c @@ -0,0 +1,466 @@ +/* + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common Clock Framework support for S3C2443 and following SoCs. + */ + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/syscore_ops.h> + +#include <dt-bindings/clock/s3c2443.h> + +#include "clk.h" +#include "clk-pll.h" + +/* S3C2416 clock controller register offsets */ +#define LOCKCON0 0x00 +#define LOCKCON1 0x04 +#define MPLLCON 0x10 +#define EPLLCON 0x18 +#define EPLLCON_K 0x1C +#define CLKSRC 0x20 +#define CLKDIV0 0x24 +#define CLKDIV1 0x28 +#define CLKDIV2 0x2C +#define HCLKCON 0x30 +#define PCLKCON 0x34 +#define SCLKCON 0x38 + +/* the soc types */ +enum supported_socs { + S3C2416, + S3C2443, + S3C2450, +}; + +/* list of PLLs to be registered */ +enum s3c2443_plls { + mpll, epll, +}; + +static void __iomem *reg_base; + +#ifdef CONFIG_PM_SLEEP +static struct samsung_clk_reg_dump *s3c2443_save; + +/* + * list of controller registers to be saved and restored during a + * suspend/resume cycle. + */ +static unsigned long s3c2443_clk_regs[] __initdata = { + LOCKCON0, + LOCKCON1, + MPLLCON, + EPLLCON, + EPLLCON_K, + CLKSRC, + CLKDIV0, + CLKDIV1, + CLKDIV2, + PCLKCON, + HCLKCON, + SCLKCON, +}; + +static int s3c2443_clk_suspend(void) +{ + samsung_clk_save(reg_base, s3c2443_save, + ARRAY_SIZE(s3c2443_clk_regs)); + + return 0; +} + +static void s3c2443_clk_resume(void) +{ + samsung_clk_restore(reg_base, s3c2443_save, + ARRAY_SIZE(s3c2443_clk_regs)); +} + +static struct syscore_ops s3c2443_clk_syscore_ops = { + .suspend = s3c2443_clk_suspend, + .resume = s3c2443_clk_resume, +}; + +static void s3c2443_clk_sleep_init(void) +{ + s3c2443_save = samsung_clk_alloc_reg_dump(s3c2443_clk_regs, + ARRAY_SIZE(s3c2443_clk_regs)); + if (!s3c2443_save) { + pr_warn("%s: failed to allocate sleep save data, no sleep support!\n", + __func__); + return; + } + + register_syscore_ops(&s3c2443_clk_syscore_ops); + return; +} +#else +static void s3c2443_clk_sleep_init(void) {} +#endif + +PNAME(epllref_p) = { "mpllref", "mpllref", "xti", "ext" }; +PNAME(esysclk_p) = { "epllref", "epll" }; +PNAME(mpllref_p) = { "xti", "mdivclk" }; +PNAME(msysclk_p) = { "mpllref", "mpll" }; +PNAME(armclk_p) = { "armdiv" , "hclk" }; +PNAME(i2s0_p) = { "div_i2s0", "ext_i2s", "epllref", "epllref" }; + +struct samsung_mux_clock s3c2443_common_muxes[] __initdata = { + MUX(0, "epllref", epllref_p, CLKSRC, 7, 2), + MUX(ESYSCLK, "esysclk", esysclk_p, CLKSRC, 6, 1), + MUX(0, "mpllref", mpllref_p, CLKSRC, 3, 1), + MUX_A(MSYSCLK, "msysclk", msysclk_p, CLKSRC, 4, 1, "msysclk"), + MUX_A(ARMCLK, "armclk", armclk_p, CLKDIV0, 13, 1, "armclk"), + MUX(0, "mux_i2s0", i2s0_p, CLKSRC, 14, 2), +}; + +static struct clk_div_table hclk_d[] = { + { .val = 0, .div = 1 }, + { .val = 1, .div = 2 }, + { .val = 3, .div = 4 }, + { /* sentinel */ }, +}; + +static struct clk_div_table mdivclk_d[] = { + { .val = 0, .div = 1 }, + { .val = 1, .div = 3 }, + { .val = 2, .div = 5 }, + { .val = 3, .div = 7 }, + { .val = 4, .div = 9 }, + { .val = 5, .div = 11 }, + { .val = 6, .div = 13 }, + { .val = 7, .div = 15 }, + { /* sentinel */ }, +}; + +struct samsung_div_clock s3c2443_common_dividers[] __initdata = { + DIV_T(0, "mdivclk", "xti", CLKDIV0, 6, 3, mdivclk_d), + DIV(0, "prediv", "msysclk", CLKDIV0, 4, 2), + DIV_T(HCLK, "hclk", "prediv", CLKDIV0, 0, 2, hclk_d), + DIV(PCLK, "pclk", "hclk", CLKDIV0, 2, 1), + DIV(0, "div_hsspi0_epll", "esysclk", CLKDIV1, 24, 2), + DIV(0, "div_fimd", "esysclk", CLKDIV1, 16, 8), + DIV(0, "div_i2s0", "esysclk", CLKDIV1, 12, 4), + DIV(0, "div_uart", "esysclk", CLKDIV1, 8, 4), + DIV(0, "div_hsmmc1", "esysclk", CLKDIV1, 6, 2), + DIV(0, "div_usbhost", "esysclk", CLKDIV1, 4, 2), +}; + +struct samsung_gate_clock s3c2443_common_gates[] __initdata = { + GATE(SCLK_HSMMC_EXT, "sclk_hsmmcext", "ext", SCLKCON, 13, 0, 0), + GATE(SCLK_HSMMC1, "sclk_hsmmc1", "div_hsmmc1", SCLKCON, 12, 0, 0), + GATE(SCLK_FIMD, "sclk_fimd", "div_fimd", SCLKCON, 10, 0, 0), + GATE(SCLK_I2S0, "sclk_i2s0", "mux_i2s0", SCLKCON, 9, 0, 0), + GATE(SCLK_UART, "sclk_uart", "div_uart", SCLKCON, 8, 0, 0), + GATE(SCLK_USBH, "sclk_usbhost", "div_usbhost", SCLKCON, 1, 0, 0), + GATE(HCLK_DRAM, "dram", "hclk", HCLKCON, 19, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_SSMC, "ssmc", "hclk", HCLKCON, 18, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_HSMMC1, "hsmmc1", "hclk", HCLKCON, 16, 0, 0), + GATE(HCLK_USBD, "usb-device", "hclk", HCLKCON, 12, 0, 0), + GATE(HCLK_USBH, "usb-host", "hclk", HCLKCON, 11, 0, 0), + GATE(HCLK_LCD, "lcd", "hclk", HCLKCON, 9, 0, 0), + GATE(HCLK_DMA5, "dma5", "hclk", HCLKCON, 5, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_DMA4, "dma4", "hclk", HCLKCON, 4, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_DMA3, "dma3", "hclk", HCLKCON, 3, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_DMA2, "dma2", "hclk", HCLKCON, 2, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_DMA1, "dma1", "hclk", HCLKCON, 1, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_DMA0, "dma0", "hclk", HCLKCON, 0, CLK_IGNORE_UNUSED, 0), + GATE(PCLK_GPIO, "gpio", "pclk", PCLKCON, 13, CLK_IGNORE_UNUSED, 0), + GATE(PCLK_RTC, "rtc", "pclk", PCLKCON, 12, 0, 0), + GATE(PCLK_WDT, "wdt", "pclk", PCLKCON, 11, 0, 0), + GATE(PCLK_PWM, "pwm", "pclk", PCLKCON, 10, 0, 0), + GATE(PCLK_I2S0, "i2s0", "pclk", PCLKCON, 9, 0, 0), + GATE(PCLK_AC97, "ac97", "pclk", PCLKCON, 8, 0, 0), + GATE(PCLK_ADC, "adc", "pclk", PCLKCON, 7, 0, 0), + GATE(PCLK_SPI0, "spi0", "pclk", PCLKCON, 6, 0, 0), + GATE(PCLK_I2C0, "i2c0", "pclk", PCLKCON, 4, 0, 0), + GATE(PCLK_UART3, "uart3", "pclk", PCLKCON, 3, 0, 0), + GATE(PCLK_UART2, "uart2", "pclk", PCLKCON, 2, 0, 0), + GATE(PCLK_UART1, "uart1", "pclk", PCLKCON, 1, 0, 0), + GATE(PCLK_UART0, "uart0", "pclk", PCLKCON, 0, 0, 0), +}; + +struct samsung_clock_alias s3c2443_common_aliases[] __initdata = { + ALIAS(HCLK, NULL, "hclk"), + ALIAS(HCLK_SSMC, NULL, "nand"), + ALIAS(PCLK_UART0, "s3c2440-uart.0", "uart"), + ALIAS(PCLK_UART1, "s3c2440-uart.1", "uart"), + ALIAS(PCLK_UART2, "s3c2440-uart.2", "uart"), + ALIAS(PCLK_UART3, "s3c2440-uart.3", "uart"), + ALIAS(PCLK_UART0, "s3c2440-uart.0", "clk_uart_baud2"), + ALIAS(PCLK_UART1, "s3c2440-uart.1", "clk_uart_baud2"), + ALIAS(PCLK_UART2, "s3c2440-uart.2", "clk_uart_baud2"), + ALIAS(PCLK_UART3, "s3c2440-uart.3", "clk_uart_baud2"), + ALIAS(SCLK_UART, NULL, "clk_uart_baud3"), + ALIAS(PCLK_PWM, NULL, "timers"), + ALIAS(PCLK_RTC, NULL, "rtc"), + ALIAS(PCLK_WDT, NULL, "watchdog"), + ALIAS(PCLK_ADC, NULL, "adc"), + ALIAS(PCLK_I2C0, "s3c2410-i2c.0", "i2c"), + ALIAS(HCLK_USBD, NULL, "usb-device"), + ALIAS(HCLK_USBH, NULL, "usb-host"), + ALIAS(SCLK_USBH, NULL, "usb-bus-host"), + ALIAS(PCLK_SPI0, "s3c2443-spi.0", "spi"), + ALIAS(PCLK_SPI0, "s3c2443-spi.0", "spi_busclk0"), + ALIAS(HCLK_HSMMC1, "s3c-sdhci.1", "hsmmc"), + ALIAS(HCLK_HSMMC1, "s3c-sdhci.1", "mmc_busclk.0"), + ALIAS(PCLK_I2S0, "samsung-i2s.0", "iis"), + ALIAS(SCLK_I2S0, NULL, "i2s-if"), + ALIAS(HCLK_LCD, NULL, "lcd"), + ALIAS(SCLK_FIMD, NULL, "sclk_fimd"), +}; + +/* S3C2416 specific clocks */ + +static struct samsung_pll_clock s3c2416_pll_clks[] __initdata = { + [mpll] = PLL(pll_6552_s3c2416, 0, "mpll", "mpllref", + LOCKCON0, MPLLCON, NULL), + [epll] = PLL(pll_6553, 0, "epll", "epllref", + LOCKCON1, EPLLCON, NULL), +}; + +PNAME(s3c2416_hsmmc0_p) = { "sclk_hsmmc0", "sclk_hsmmcext" }; +PNAME(s3c2416_hsmmc1_p) = { "sclk_hsmmc1", "sclk_hsmmcext" }; +PNAME(s3c2416_hsspi0_p) = { "hsspi0_epll", "hsspi0_mpll" }; + +static struct clk_div_table armdiv_s3c2416_d[] = { + { .val = 0, .div = 1 }, + { .val = 1, .div = 2 }, + { .val = 2, .div = 3 }, + { .val = 3, .div = 4 }, + { .val = 5, .div = 6 }, + { .val = 7, .div = 8 }, + { /* sentinel */ }, +}; + +struct samsung_div_clock s3c2416_dividers[] __initdata = { + DIV_T(ARMDIV, "armdiv", "msysclk", CLKDIV0, 9, 3, armdiv_s3c2416_d), + DIV(0, "div_hsspi0_mpll", "msysclk", CLKDIV2, 0, 4), + DIV(0, "div_hsmmc0", "esysclk", CLKDIV2, 6, 2), +}; + +struct samsung_mux_clock s3c2416_muxes[] __initdata = { + MUX(MUX_HSMMC0, "mux_hsmmc0", s3c2416_hsmmc0_p, CLKSRC, 16, 1), + MUX(MUX_HSMMC1, "mux_hsmmc1", s3c2416_hsmmc1_p, CLKSRC, 17, 1), + MUX(MUX_HSSPI0, "mux_hsspi0", s3c2416_hsspi0_p, CLKSRC, 18, 1), +}; + +struct samsung_gate_clock s3c2416_gates[] __initdata = { + GATE(0, "hsspi0_mpll", "div_hsspi0_mpll", SCLKCON, 19, 0, 0), + GATE(0, "hsspi0_epll", "div_hsspi0_epll", SCLKCON, 14, 0, 0), + GATE(0, "sclk_hsmmc0", "div_hsmmc0", SCLKCON, 6, 0, 0), + GATE(HCLK_2D, "2d", "hclk", HCLKCON, 20, 0, 0), + GATE(HCLK_HSMMC0, "hsmmc0", "hclk", HCLKCON, 15, 0, 0), + GATE(HCLK_IROM, "irom", "hclk", HCLKCON, 13, CLK_IGNORE_UNUSED, 0), + GATE(PCLK_PCM, "pcm", "pclk", PCLKCON, 19, 0, 0), +}; + +struct samsung_clock_alias s3c2416_aliases[] __initdata = { + ALIAS(HCLK_HSMMC0, "s3c-sdhci.0", "hsmmc"), + ALIAS(HCLK_HSMMC0, "s3c-sdhci.0", "mmc_busclk.0"), + ALIAS(MUX_HSMMC0, "s3c-sdhci.0", "mmc_busclk.2"), + ALIAS(MUX_HSMMC1, "s3c-sdhci.1", "mmc_busclk.2"), + ALIAS(MUX_HSSPI0, "s3c2443-spi.0", "spi_busclk2"), + ALIAS(ARMDIV, NULL, "armdiv"), +}; + +/* S3C2443 specific clocks */ + +static struct samsung_pll_clock s3c2443_pll_clks[] __initdata = { + [mpll] = PLL(pll_3000, 0, "mpll", "mpllref", + LOCKCON0, MPLLCON, NULL), + [epll] = PLL(pll_2126, 0, "epll", "epllref", + LOCKCON1, EPLLCON, NULL), +}; + +static struct clk_div_table armdiv_s3c2443_d[] = { + { .val = 0, .div = 1 }, + { .val = 8, .div = 2 }, + { .val = 2, .div = 3 }, + { .val = 9, .div = 4 }, + { .val = 10, .div = 6 }, + { .val = 11, .div = 8 }, + { .val = 13, .div = 12 }, + { .val = 15, .div = 16 }, + { /* sentinel */ }, +}; + +struct samsung_div_clock s3c2443_dividers[] __initdata = { + DIV_T(ARMDIV, "armdiv", "msysclk", CLKDIV0, 9, 4, armdiv_s3c2443_d), + DIV(0, "div_cam", "esysclk", CLKDIV1, 26, 4), +}; + +struct samsung_gate_clock s3c2443_gates[] __initdata = { + GATE(SCLK_HSSPI0, "sclk_hsspi0", "div_hsspi0_epll", SCLKCON, 14, 0, 0), + GATE(SCLK_CAM, "sclk_cam", "div_cam", SCLKCON, 11, 0, 0), + GATE(HCLK_CFC, "cfc", "hclk", HCLKCON, 17, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_CAM, "cam", "hclk", HCLKCON, 8, 0, 0), + GATE(PCLK_SPI1, "spi1", "pclk", PCLKCON, 15, 0, 0), + GATE(PCLK_SDI, "sdi", "pclk", PCLKCON, 5, 0, 0), +}; + +struct samsung_clock_alias s3c2443_aliases[] __initdata = { + ALIAS(SCLK_HSSPI0, "s3c2443-spi.0", "spi_busclk2"), + ALIAS(SCLK_HSMMC1, "s3c-sdhci.1", "mmc_busclk.2"), + ALIAS(SCLK_CAM, NULL, "camif-upll"), + ALIAS(PCLK_SPI1, "s3c2410-spi.0", "spi"), + ALIAS(PCLK_SDI, NULL, "sdi"), + ALIAS(HCLK_CFC, NULL, "cfc"), + ALIAS(ARMDIV, NULL, "armdiv"), +}; + +/* S3C2450 specific clocks */ + +PNAME(s3c2450_cam_p) = { "div_cam", "hclk" }; +PNAME(s3c2450_hsspi1_p) = { "hsspi1_epll", "hsspi1_mpll" }; +PNAME(i2s1_p) = { "div_i2s1", "ext_i2s", "epllref", "epllref" }; + +struct samsung_div_clock s3c2450_dividers[] __initdata = { + DIV(0, "div_cam", "esysclk", CLKDIV1, 26, 4), + DIV(0, "div_hsspi1_epll", "esysclk", CLKDIV2, 24, 2), + DIV(0, "div_hsspi1_mpll", "msysclk", CLKDIV2, 16, 4), + DIV(0, "div_i2s1", "esysclk", CLKDIV2, 12, 4), +}; + +struct samsung_mux_clock s3c2450_muxes[] __initdata = { + MUX(0, "mux_cam", s3c2450_cam_p, CLKSRC, 20, 1), + MUX(MUX_HSSPI1, "mux_hsspi1", s3c2450_hsspi1_p, CLKSRC, 19, 1), + MUX(0, "mux_i2s1", i2s1_p, CLKSRC, 12, 2), +}; + +struct samsung_gate_clock s3c2450_gates[] __initdata = { + GATE(SCLK_I2S1, "sclk_i2s1", "div_i2s1", SCLKCON, 5, 0, 0), + GATE(HCLK_CFC, "cfc", "hclk", HCLKCON, 17, 0, 0), + GATE(HCLK_CAM, "cam", "hclk", HCLKCON, 8, 0, 0), + GATE(HCLK_DMA7, "dma7", "hclk", HCLKCON, 7, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_DMA6, "dma6", "hclk", HCLKCON, 6, CLK_IGNORE_UNUSED, 0), + GATE(PCLK_I2S1, "i2s1", "pclk", PCLKCON, 17, 0, 0), + GATE(PCLK_I2C1, "i2c1", "pclk", PCLKCON, 16, 0, 0), + GATE(PCLK_SPI1, "spi1", "pclk", PCLKCON, 14, 0, 0), +}; + +struct samsung_clock_alias s3c2450_aliases[] __initdata = { + ALIAS(PCLK_SPI1, "s3c2443-spi.1", "spi"), + ALIAS(PCLK_SPI1, "s3c2443-spi.1", "spi_busclk0"), + ALIAS(MUX_HSSPI1, "s3c2443-spi.1", "spi_busclk2"), + ALIAS(PCLK_I2C1, "s3c2410-i2c.1", "i2c"), +}; + +/* + * fixed rate clocks generated outside the soc + * Only necessary until the devicetree-move is complete + */ +struct samsung_fixed_rate_clock s3c2443_common_frate_clks[] __initdata = { + FRATE(0, "xti", NULL, CLK_IS_ROOT, 0), + FRATE(0, "ext", NULL, CLK_IS_ROOT, 0), + FRATE(0, "ext_i2s", NULL, CLK_IS_ROOT, 0), + FRATE(0, "ext_uart", NULL, CLK_IS_ROOT, 0), +}; + +static void __init s3c2443_common_clk_register_fixed_ext( + struct samsung_clk_provider *ctx, unsigned long xti_f) +{ + s3c2443_common_frate_clks[0].fixed_rate = xti_f; + samsung_clk_register_fixed_rate(ctx, s3c2443_common_frate_clks, + ARRAY_SIZE(s3c2443_common_frate_clks)); +} + +void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f, + int current_soc, + void __iomem *base) +{ + struct samsung_clk_provider *ctx; + reg_base = base; + + if (np) { + reg_base = of_iomap(np, 0); + if (!reg_base) + panic("%s: failed to map registers\n", __func__); + } + + ctx = samsung_clk_init(np, reg_base, NR_CLKS); + if (!ctx) + panic("%s: unable to allocate context.\n", __func__); + + /* Register external clocks only in non-dt cases */ + if (!np) + s3c2443_common_clk_register_fixed_ext(ctx, xti_f); + + /* Register PLLs. */ + if (current_soc == S3C2416 || current_soc == S3C2450) + samsung_clk_register_pll(ctx, s3c2416_pll_clks, + ARRAY_SIZE(s3c2416_pll_clks), reg_base); + else + samsung_clk_register_pll(ctx, s3c2443_pll_clks, + ARRAY_SIZE(s3c2443_pll_clks), reg_base); + + /* Register common internal clocks. */ + samsung_clk_register_mux(ctx, s3c2443_common_muxes, + ARRAY_SIZE(s3c2443_common_muxes)); + samsung_clk_register_div(ctx, s3c2443_common_dividers, + ARRAY_SIZE(s3c2443_common_dividers)); + samsung_clk_register_gate(ctx, s3c2443_common_gates, + ARRAY_SIZE(s3c2443_common_gates)); + samsung_clk_register_alias(ctx, s3c2443_common_aliases, + ARRAY_SIZE(s3c2443_common_aliases)); + + /* Register SoC-specific clocks. */ + switch (current_soc) { + case S3C2450: + samsung_clk_register_div(ctx, s3c2450_dividers, + ARRAY_SIZE(s3c2450_dividers)); + samsung_clk_register_mux(ctx, s3c2450_muxes, + ARRAY_SIZE(s3c2450_muxes)); + samsung_clk_register_gate(ctx, s3c2450_gates, + ARRAY_SIZE(s3c2450_gates)); + samsung_clk_register_alias(ctx, s3c2450_aliases, + ARRAY_SIZE(s3c2450_aliases)); + /* fall through, as s3c2450 extends the s3c2416 clocks */ + case S3C2416: + samsung_clk_register_div(ctx, s3c2416_dividers, + ARRAY_SIZE(s3c2416_dividers)); + samsung_clk_register_mux(ctx, s3c2416_muxes, + ARRAY_SIZE(s3c2416_muxes)); + samsung_clk_register_gate(ctx, s3c2416_gates, + ARRAY_SIZE(s3c2416_gates)); + samsung_clk_register_alias(ctx, s3c2416_aliases, + ARRAY_SIZE(s3c2416_aliases)); + break; + case S3C2443: + samsung_clk_register_div(ctx, s3c2443_dividers, + ARRAY_SIZE(s3c2443_dividers)); + samsung_clk_register_gate(ctx, s3c2443_gates, + ARRAY_SIZE(s3c2443_gates)); + samsung_clk_register_alias(ctx, s3c2443_aliases, + ARRAY_SIZE(s3c2443_aliases)); + break; + } + + s3c2443_clk_sleep_init(); +} + +static void __init s3c2416_clk_init(struct device_node *np) +{ + s3c2443_common_clk_init(np, 0, S3C2416, 0); +} +CLK_OF_DECLARE(s3c2416_clk, "samsung,s3c2416-clock", s3c2416_clk_init); + +static void __init s3c2443_clk_init(struct device_node *np) +{ + s3c2443_common_clk_init(np, 0, S3C2443, 0); +} +CLK_OF_DECLARE(s3c2443_clk, "samsung,s3c2443-clock", s3c2443_clk_init); + +static void __init s3c2450_clk_init(struct device_node *np) +{ + s3c2443_common_clk_init(np, 0, S3C2450, 0); +} +CLK_OF_DECLARE(s3c2450_clk, "samsung,s3c2450-clock", s3c2450_clk_init); diff --git a/drivers/clk/samsung/clk-s3c64xx.c b/drivers/clk/samsung/clk-s3c64xx.c index 8bda658137a8..efa16ee592c8 100644 --- a/drivers/clk/samsung/clk-s3c64xx.c +++ b/drivers/clk/samsung/clk-s3c64xx.c @@ -442,12 +442,14 @@ static struct samsung_clock_alias s3c6410_clock_aliases[] = { ALIAS(MEM0_SROM, NULL, "srom"), }; -static void __init s3c64xx_clk_register_fixed_ext(unsigned long fin_pll_f, - unsigned long xusbxti_f) +static void __init s3c64xx_clk_register_fixed_ext( + struct samsung_clk_provider *ctx, + unsigned long fin_pll_f, + unsigned long xusbxti_f) { s3c64xx_fixed_rate_ext_clks[0].fixed_rate = fin_pll_f; s3c64xx_fixed_rate_ext_clks[1].fixed_rate = xusbxti_f; - samsung_clk_register_fixed_rate(s3c64xx_fixed_rate_ext_clks, + samsung_clk_register_fixed_rate(ctx, s3c64xx_fixed_rate_ext_clks, ARRAY_SIZE(s3c64xx_fixed_rate_ext_clks)); } @@ -456,6 +458,8 @@ void __init s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f, unsigned long xusbxti_f, bool s3c6400, void __iomem *base) { + struct samsung_clk_provider *ctx; + reg_base = base; is_s3c6400 = s3c6400; @@ -465,48 +469,50 @@ void __init s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f, panic("%s: failed to map registers\n", __func__); } - samsung_clk_init(np, reg_base, NR_CLKS); + ctx = samsung_clk_init(np, reg_base, NR_CLKS); + if (!ctx) + panic("%s: unable to allocate context.\n", __func__); /* Register external clocks. */ if (!np) - s3c64xx_clk_register_fixed_ext(xtal_f, xusbxti_f); + s3c64xx_clk_register_fixed_ext(ctx, xtal_f, xusbxti_f); /* Register PLLs. */ - samsung_clk_register_pll(s3c64xx_pll_clks, + samsung_clk_register_pll(ctx, s3c64xx_pll_clks, ARRAY_SIZE(s3c64xx_pll_clks), reg_base); /* Register common internal clocks. */ - samsung_clk_register_fixed_rate(s3c64xx_fixed_rate_clks, + samsung_clk_register_fixed_rate(ctx, s3c64xx_fixed_rate_clks, ARRAY_SIZE(s3c64xx_fixed_rate_clks)); - samsung_clk_register_mux(s3c64xx_mux_clks, + samsung_clk_register_mux(ctx, s3c64xx_mux_clks, ARRAY_SIZE(s3c64xx_mux_clks)); - samsung_clk_register_div(s3c64xx_div_clks, + samsung_clk_register_div(ctx, s3c64xx_div_clks, ARRAY_SIZE(s3c64xx_div_clks)); - samsung_clk_register_gate(s3c64xx_gate_clks, + samsung_clk_register_gate(ctx, s3c64xx_gate_clks, ARRAY_SIZE(s3c64xx_gate_clks)); /* Register SoC-specific clocks. */ if (is_s3c6400) { - samsung_clk_register_mux(s3c6400_mux_clks, + samsung_clk_register_mux(ctx, s3c6400_mux_clks, ARRAY_SIZE(s3c6400_mux_clks)); - samsung_clk_register_div(s3c6400_div_clks, + samsung_clk_register_div(ctx, s3c6400_div_clks, ARRAY_SIZE(s3c6400_div_clks)); - samsung_clk_register_gate(s3c6400_gate_clks, + samsung_clk_register_gate(ctx, s3c6400_gate_clks, ARRAY_SIZE(s3c6400_gate_clks)); - samsung_clk_register_alias(s3c6400_clock_aliases, + samsung_clk_register_alias(ctx, s3c6400_clock_aliases, ARRAY_SIZE(s3c6400_clock_aliases)); } else { - samsung_clk_register_mux(s3c6410_mux_clks, + samsung_clk_register_mux(ctx, s3c6410_mux_clks, ARRAY_SIZE(s3c6410_mux_clks)); - samsung_clk_register_div(s3c6410_div_clks, + samsung_clk_register_div(ctx, s3c6410_div_clks, ARRAY_SIZE(s3c6410_div_clks)); - samsung_clk_register_gate(s3c6410_gate_clks, + samsung_clk_register_gate(ctx, s3c6410_gate_clks, ARRAY_SIZE(s3c6410_gate_clks)); - samsung_clk_register_alias(s3c6410_clock_aliases, + samsung_clk_register_alias(ctx, s3c6410_clock_aliases, ARRAY_SIZE(s3c6410_clock_aliases)); } - samsung_clk_register_alias(s3c64xx_clock_aliases, + samsung_clk_register_alias(ctx, s3c64xx_clock_aliases, ARRAY_SIZE(s3c64xx_clock_aliases)); s3c64xx_clk_sleep_init(); diff --git a/drivers/clk/samsung/clk.c b/drivers/clk/samsung/clk.c index 91bec3ebdc8f..49629c71c9e7 100644 --- a/drivers/clk/samsung/clk.c +++ b/drivers/clk/samsung/clk.c @@ -14,13 +14,6 @@ #include <linux/syscore_ops.h> #include "clk.h" -static DEFINE_SPINLOCK(lock); -static struct clk **clk_table; -static void __iomem *reg_base; -#ifdef CONFIG_OF -static struct clk_onecell_data clk_data; -#endif - void samsung_clk_save(void __iomem *base, struct samsung_clk_reg_dump *rd, unsigned int num_regs) @@ -55,40 +48,58 @@ struct samsung_clk_reg_dump *samsung_clk_alloc_reg_dump( } /* setup the essentials required to support clock lookup using ccf */ -void __init samsung_clk_init(struct device_node *np, void __iomem *base, - unsigned long nr_clks) +struct samsung_clk_provider *__init samsung_clk_init(struct device_node *np, + void __iomem *base, unsigned long nr_clks) { - reg_base = base; + struct samsung_clk_provider *ctx; + struct clk **clk_table; + int ret; + int i; - clk_table = kzalloc(sizeof(struct clk *) * nr_clks, GFP_KERNEL); + ctx = kzalloc(sizeof(struct samsung_clk_provider), GFP_KERNEL); + if (!ctx) + panic("could not allocate clock provider context.\n"); + + clk_table = kcalloc(nr_clks, sizeof(struct clk *), GFP_KERNEL); if (!clk_table) panic("could not allocate clock lookup table\n"); + for (i = 0; i < nr_clks; ++i) + clk_table[i] = ERR_PTR(-ENOENT); + + ctx->reg_base = base; + ctx->clk_data.clks = clk_table; + ctx->clk_data.clk_num = nr_clks; + spin_lock_init(&ctx->lock); + if (!np) - return; + return ctx; -#ifdef CONFIG_OF - clk_data.clks = clk_table; - clk_data.clk_num = nr_clks; - of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); -#endif + ret = of_clk_add_provider(np, of_clk_src_onecell_get, + &ctx->clk_data); + if (ret) + panic("could not register clock provide\n"); + + return ctx; } /* add a clock instance to the clock lookup table used for dt based lookup */ -void samsung_clk_add_lookup(struct clk *clk, unsigned int id) +void samsung_clk_add_lookup(struct samsung_clk_provider *ctx, struct clk *clk, + unsigned int id) { - if (clk_table && id) - clk_table[id] = clk; + if (ctx->clk_data.clks && id) + ctx->clk_data.clks[id] = clk; } /* register a list of aliases */ -void __init samsung_clk_register_alias(struct samsung_clock_alias *list, - unsigned int nr_clk) +void __init samsung_clk_register_alias(struct samsung_clk_provider *ctx, + struct samsung_clock_alias *list, + unsigned int nr_clk) { struct clk *clk; unsigned int idx, ret; - if (!clk_table) { + if (!ctx->clk_data.clks) { pr_err("%s: clock table missing\n", __func__); return; } @@ -100,7 +111,7 @@ void __init samsung_clk_register_alias(struct samsung_clock_alias *list, continue; } - clk = clk_table[list->id]; + clk = ctx->clk_data.clks[list->id]; if (!clk) { pr_err("%s: failed to find clock %d\n", __func__, list->id); @@ -115,7 +126,7 @@ void __init samsung_clk_register_alias(struct samsung_clock_alias *list, } /* register a list of fixed clocks */ -void __init samsung_clk_register_fixed_rate( +void __init samsung_clk_register_fixed_rate(struct samsung_clk_provider *ctx, struct samsung_fixed_rate_clock *list, unsigned int nr_clk) { struct clk *clk; @@ -130,7 +141,7 @@ void __init samsung_clk_register_fixed_rate( continue; } - samsung_clk_add_lookup(clk, list->id); + samsung_clk_add_lookup(ctx, clk, list->id); /* * Unconditionally add a clock lookup for the fixed rate clocks. @@ -144,7 +155,7 @@ void __init samsung_clk_register_fixed_rate( } /* register a list of fixed factor clocks */ -void __init samsung_clk_register_fixed_factor( +void __init samsung_clk_register_fixed_factor(struct samsung_clk_provider *ctx, struct samsung_fixed_factor_clock *list, unsigned int nr_clk) { struct clk *clk; @@ -159,28 +170,30 @@ void __init samsung_clk_register_fixed_factor( continue; } - samsung_clk_add_lookup(clk, list->id); + samsung_clk_add_lookup(ctx, clk, list->id); } } /* register a list of mux clocks */ -void __init samsung_clk_register_mux(struct samsung_mux_clock *list, - unsigned int nr_clk) +void __init samsung_clk_register_mux(struct samsung_clk_provider *ctx, + struct samsung_mux_clock *list, + unsigned int nr_clk) { struct clk *clk; unsigned int idx, ret; for (idx = 0; idx < nr_clk; idx++, list++) { clk = clk_register_mux(NULL, list->name, list->parent_names, - list->num_parents, list->flags, reg_base + list->offset, - list->shift, list->width, list->mux_flags, &lock); + list->num_parents, list->flags, + ctx->reg_base + list->offset, + list->shift, list->width, list->mux_flags, &ctx->lock); if (IS_ERR(clk)) { pr_err("%s: failed to register clock %s\n", __func__, list->name); continue; } - samsung_clk_add_lookup(clk, list->id); + samsung_clk_add_lookup(ctx, clk, list->id); /* register a clock lookup only if a clock alias is specified */ if (list->alias) { @@ -194,8 +207,9 @@ void __init samsung_clk_register_mux(struct samsung_mux_clock *list, } /* register a list of div clocks */ -void __init samsung_clk_register_div(struct samsung_div_clock *list, - unsigned int nr_clk) +void __init samsung_clk_register_div(struct samsung_clk_provider *ctx, + struct samsung_div_clock *list, + unsigned int nr_clk) { struct clk *clk; unsigned int idx, ret; @@ -203,22 +217,22 @@ void __init samsung_clk_register_div(struct samsung_div_clock *list, for (idx = 0; idx < nr_clk; idx++, list++) { if (list->table) clk = clk_register_divider_table(NULL, list->name, - list->parent_name, list->flags, - reg_base + list->offset, list->shift, - list->width, list->div_flags, - list->table, &lock); + list->parent_name, list->flags, + ctx->reg_base + list->offset, + list->shift, list->width, list->div_flags, + list->table, &ctx->lock); else clk = clk_register_divider(NULL, list->name, - list->parent_name, list->flags, - reg_base + list->offset, list->shift, - list->width, list->div_flags, &lock); + list->parent_name, list->flags, + ctx->reg_base + list->offset, list->shift, + list->width, list->div_flags, &ctx->lock); if (IS_ERR(clk)) { pr_err("%s: failed to register clock %s\n", __func__, list->name); continue; } - samsung_clk_add_lookup(clk, list->id); + samsung_clk_add_lookup(ctx, clk, list->id); /* register a clock lookup only if a clock alias is specified */ if (list->alias) { @@ -232,16 +246,17 @@ void __init samsung_clk_register_div(struct samsung_div_clock *list, } /* register a list of gate clocks */ -void __init samsung_clk_register_gate(struct samsung_gate_clock *list, - unsigned int nr_clk) +void __init samsung_clk_register_gate(struct samsung_clk_provider *ctx, + struct samsung_gate_clock *list, + unsigned int nr_clk) { struct clk *clk; unsigned int idx, ret; for (idx = 0; idx < nr_clk; idx++, list++) { clk = clk_register_gate(NULL, list->name, list->parent_name, - list->flags, reg_base + list->offset, - list->bit_idx, list->gate_flags, &lock); + list->flags, ctx->reg_base + list->offset, + list->bit_idx, list->gate_flags, &ctx->lock); if (IS_ERR(clk)) { pr_err("%s: failed to register clock %s\n", __func__, list->name); @@ -257,7 +272,7 @@ void __init samsung_clk_register_gate(struct samsung_gate_clock *list, __func__, list->alias); } - samsung_clk_add_lookup(clk, list->id); + samsung_clk_add_lookup(ctx, clk, list->id); } } @@ -266,21 +281,21 @@ void __init samsung_clk_register_gate(struct samsung_gate_clock *list, * tree and register it */ #ifdef CONFIG_OF -void __init samsung_clk_of_register_fixed_ext( +void __init samsung_clk_of_register_fixed_ext(struct samsung_clk_provider *ctx, struct samsung_fixed_rate_clock *fixed_rate_clk, unsigned int nr_fixed_rate_clk, struct of_device_id *clk_matches) { const struct of_device_id *match; - struct device_node *np; + struct device_node *clk_np; u32 freq; - for_each_matching_node_and_match(np, clk_matches, &match) { - if (of_property_read_u32(np, "clock-frequency", &freq)) + for_each_matching_node_and_match(clk_np, clk_matches, &match) { + if (of_property_read_u32(clk_np, "clock-frequency", &freq)) continue; - fixed_rate_clk[(u32)match->data].fixed_rate = freq; + fixed_rate_clk[(unsigned long)match->data].fixed_rate = freq; } - samsung_clk_register_fixed_rate(fixed_rate_clk, nr_fixed_rate_clk); + samsung_clk_register_fixed_rate(ctx, fixed_rate_clk, nr_fixed_rate_clk); } #endif diff --git a/drivers/clk/samsung/clk.h b/drivers/clk/samsung/clk.h index c7141ba826e0..9693b80d924f 100644 --- a/drivers/clk/samsung/clk.h +++ b/drivers/clk/samsung/clk.h @@ -22,6 +22,18 @@ #include "clk-pll.h" /** + * struct samsung_clk_provider: information about clock provider + * @reg_base: virtual address for the register base. + * @clk_data: holds clock related data like clk* and number of clocks. + * @lock: maintains exclusion bwtween callbacks for a given clock-provider. + */ +struct samsung_clk_provider { + void __iomem *reg_base; + struct clk_onecell_data clk_data; + spinlock_t lock; +}; + +/** * struct samsung_clock_alias: information about mux clock * @id: platform specific id of the clock. * @dev_name: name of the device to which this clock belongs. @@ -312,40 +324,52 @@ struct samsung_pll_clock { __PLL(_typ, _id, NULL, _name, _pname, CLK_GET_RATE_NOCACHE, \ _lock, _con, _rtable, _alias) -extern void __init samsung_clk_init(struct device_node *np, void __iomem *base, - unsigned long nr_clks); +extern struct samsung_clk_provider *__init samsung_clk_init( + struct device_node *np, void __iomem *base, + unsigned long nr_clks); extern void __init samsung_clk_of_register_fixed_ext( - struct samsung_fixed_rate_clock *fixed_rate_clk, - unsigned int nr_fixed_rate_clk, - struct of_device_id *clk_matches); + struct samsung_clk_provider *ctx, + struct samsung_fixed_rate_clock *fixed_rate_clk, + unsigned int nr_fixed_rate_clk, + struct of_device_id *clk_matches); -extern void samsung_clk_add_lookup(struct clk *clk, unsigned int id); +extern void samsung_clk_add_lookup(struct samsung_clk_provider *ctx, + struct clk *clk, unsigned int id); -extern void samsung_clk_register_alias(struct samsung_clock_alias *list, - unsigned int nr_clk); +extern void samsung_clk_register_alias(struct samsung_clk_provider *ctx, + struct samsung_clock_alias *list, + unsigned int nr_clk); extern void __init samsung_clk_register_fixed_rate( - struct samsung_fixed_rate_clock *clk_list, unsigned int nr_clk); + struct samsung_clk_provider *ctx, + struct samsung_fixed_rate_clock *clk_list, + unsigned int nr_clk); extern void __init samsung_clk_register_fixed_factor( - struct samsung_fixed_factor_clock *list, unsigned int nr_clk); -extern void __init samsung_clk_register_mux(struct samsung_mux_clock *clk_list, - unsigned int nr_clk); -extern void __init samsung_clk_register_div(struct samsung_div_clock *clk_list, - unsigned int nr_clk); -extern void __init samsung_clk_register_gate( - struct samsung_gate_clock *clk_list, unsigned int nr_clk); -extern void __init samsung_clk_register_pll(struct samsung_pll_clock *pll_list, - unsigned int nr_clk, void __iomem *base); + struct samsung_clk_provider *ctx, + struct samsung_fixed_factor_clock *list, + unsigned int nr_clk); +extern void __init samsung_clk_register_mux(struct samsung_clk_provider *ctx, + struct samsung_mux_clock *clk_list, + unsigned int nr_clk); +extern void __init samsung_clk_register_div(struct samsung_clk_provider *ctx, + struct samsung_div_clock *clk_list, + unsigned int nr_clk); +extern void __init samsung_clk_register_gate(struct samsung_clk_provider *ctx, + struct samsung_gate_clock *clk_list, + unsigned int nr_clk); +extern void __init samsung_clk_register_pll(struct samsung_clk_provider *ctx, + struct samsung_pll_clock *pll_list, + unsigned int nr_clk, void __iomem *base); extern unsigned long _get_rate(const char *clk_name); extern void samsung_clk_save(void __iomem *base, - struct samsung_clk_reg_dump *rd, - unsigned int num_regs); + struct samsung_clk_reg_dump *rd, + unsigned int num_regs); extern void samsung_clk_restore(void __iomem *base, - const struct samsung_clk_reg_dump *rd, - unsigned int num_regs); + const struct samsung_clk_reg_dump *rd, + unsigned int num_regs); extern struct samsung_clk_reg_dump *samsung_clk_alloc_reg_dump( - const unsigned long *rdump, - unsigned long nr_rdump); + const unsigned long *rdump, + unsigned long nr_rdump); #endif /* __SAMSUNG_CLK_H */ diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c index be1b2b5c9753..227ebf7c1eea 100644 --- a/drivers/cpufreq/s3c24xx-cpufreq.c +++ b/drivers/cpufreq/s3c24xx-cpufreq.c @@ -141,6 +141,7 @@ static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg) { + cfg->mpll = _clk_mpll; (cfg->info->set_fvco)(cfg); } diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm index 97ccc31dbdd8..695507ae345a 100644 --- a/drivers/cpuidle/Kconfig.arm +++ b/drivers/cpuidle/Kconfig.arm @@ -44,3 +44,9 @@ config ARM_AT91_CPUIDLE depends on ARCH_AT91 help Select this to enable cpuidle for AT91 processors + +config ARM_EXYNOS_CPUIDLE + bool "Cpu Idle Driver for the Exynos processors" + depends on ARCH_EXYNOS + help + Select this to enable cpuidle for Exynos processors diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile index f71ae1b373c5..0d1540adaf78 100644 --- a/drivers/cpuidle/Makefile +++ b/drivers/cpuidle/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_ARM_KIRKWOOD_CPUIDLE) += cpuidle-kirkwood.o obj-$(CONFIG_ARM_ZYNQ_CPUIDLE) += cpuidle-zynq.o obj-$(CONFIG_ARM_U8500_CPUIDLE) += cpuidle-ux500.o obj-$(CONFIG_ARM_AT91_CPUIDLE) += cpuidle-at91.o +obj-$(CONFIG_ARM_EXYNOS_CPUIDLE) += cpuidle-exynos.o ############################################################################### # POWERPC drivers diff --git a/drivers/cpuidle/cpuidle-exynos.c b/drivers/cpuidle/cpuidle-exynos.c new file mode 100644 index 000000000000..7c0151263828 --- /dev/null +++ b/drivers/cpuidle/cpuidle-exynos.c @@ -0,0 +1,99 @@ +/* linux/arch/arm/mach-exynos/cpuidle.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/cpuidle.h> +#include <linux/cpu_pm.h> +#include <linux/export.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include <asm/proc-fns.h> +#include <asm/suspend.h> +#include <asm/cpuidle.h> + +static void (*exynos_enter_aftr)(void); + +static int idle_finisher(unsigned long flags) +{ + exynos_enter_aftr(); + cpu_do_idle(); + + return 1; +} + +static int exynos_enter_core0_aftr(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + cpu_pm_enter(); + cpu_suspend(0, idle_finisher); + cpu_pm_exit(); + + return index; +} + +static int exynos_enter_lowpower(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + int new_index = index; + + /* AFTR can only be entered when cores other than CPU0 are offline */ + if (num_online_cpus() > 1 || dev->cpu != 0) + new_index = drv->safe_state_index; + + if (new_index == 0) + return arm_cpuidle_simple_enter(dev, drv, new_index); + else + return exynos_enter_core0_aftr(dev, drv, new_index); +} + +static struct cpuidle_driver exynos_idle_driver = { + .name = "exynos_idle", + .owner = THIS_MODULE, + .states = { + [0] = ARM_CPUIDLE_WFI_STATE, + [1] = { + .enter = exynos_enter_lowpower, + .exit_latency = 300, + .target_residency = 100000, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "C1", + .desc = "ARM power down", + }, + }, + .state_count = 2, + .safe_state_index = 0, +}; + +static int exynos_cpuidle_probe(struct platform_device *pdev) +{ + int ret; + + exynos_enter_aftr = (void *)(pdev->dev.platform_data); + + ret = cpuidle_register(&exynos_idle_driver, NULL); + if (ret) { + dev_err(&pdev->dev, "failed to register cpuidle driver\n"); + return ret; + } + + return 0; +} + +static struct platform_driver exynos_cpuidle_driver = { + .probe = exynos_cpuidle_probe, + .driver = { + .name = "exynos_cpuidle", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(exynos_cpuidle_driver); diff --git a/include/dt-bindings/clock/exynos3250.h b/include/dt-bindings/clock/exynos3250.h new file mode 100644 index 000000000000..b535e9da7de6 --- /dev/null +++ b/include/dt-bindings/clock/exynos3250.h @@ -0,0 +1,258 @@ +/* + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * Author: Tomasz Figa <t.figa@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Device Tree binding constants for Samsung Exynos3250 clock controllers. + */ + +#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS3250_CLOCK_H +#define _DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS3250_CLOCK_H + +/* + * Let each exported clock get a unique index, which is used on DT-enabled + * platforms to lookup the clock from a clock specifier. These indices are + * therefore considered an ABI and so must not be changed. This implies + * that new clocks should be added either in free spaces between clock groups + * or at the end. + */ + + +/* + * Main CMU + */ + +#define CLK_OSCSEL 1 +#define CLK_FIN_PLL 2 +#define CLK_FOUT_APLL 3 +#define CLK_FOUT_VPLL 4 +#define CLK_FOUT_UPLL 5 +#define CLK_FOUT_MPLL 6 + +/* Muxes */ +#define CLK_MOUT_MPLL_USER_L 16 +#define CLK_MOUT_GDL 17 +#define CLK_MOUT_MPLL_USER_R 18 +#define CLK_MOUT_GDR 19 +#define CLK_MOUT_EBI 20 +#define CLK_MOUT_ACLK_200 21 +#define CLK_MOUT_ACLK_160 22 +#define CLK_MOUT_ACLK_100 23 +#define CLK_MOUT_ACLK_266_1 24 +#define CLK_MOUT_ACLK_266_0 25 +#define CLK_MOUT_ACLK_266 26 +#define CLK_MOUT_VPLL 27 +#define CLK_MOUT_EPLL_USER 28 +#define CLK_MOUT_EBI_1 29 +#define CLK_MOUT_UPLL 30 +#define CLK_MOUT_ACLK_400_MCUISP_SUB 31 +#define CLK_MOUT_MPLL 32 +#define CLK_MOUT_ACLK_400_MCUISP 33 +#define CLK_MOUT_VPLLSRC 34 +#define CLK_MOUT_CAM1 35 +#define CLK_MOUT_CAM_BLK 36 +#define CLK_MOUT_MFC 37 +#define CLK_MOUT_MFC_1 38 +#define CLK_MOUT_MFC_0 39 +#define CLK_MOUT_G3D 40 +#define CLK_MOUT_G3D_1 41 +#define CLK_MOUT_G3D_0 42 +#define CLK_MOUT_MIPI0 43 +#define CLK_MOUT_FIMD0 44 +#define CLK_MOUT_UART_ISP 45 +#define CLK_MOUT_SPI1_ISP 46 +#define CLK_MOUT_SPI0_ISP 47 +#define CLK_MOUT_TSADC 48 +#define CLK_MOUT_MMC1 49 +#define CLK_MOUT_MMC0 50 +#define CLK_MOUT_UART1 51 +#define CLK_MOUT_UART0 52 +#define CLK_MOUT_SPI1 53 +#define CLK_MOUT_SPI0 54 +#define CLK_MOUT_AUDIO 55 +#define CLK_MOUT_MPLL_USER_C 56 +#define CLK_MOUT_HPM 57 +#define CLK_MOUT_CORE 58 +#define CLK_MOUT_APLL 59 +#define CLK_MOUT_ACLK_266_SUB 60 + +/* Dividers */ +#define CLK_DIV_GPL 64 +#define CLK_DIV_GDL 65 +#define CLK_DIV_GPR 66 +#define CLK_DIV_GDR 67 +#define CLK_DIV_MPLL_PRE 68 +#define CLK_DIV_ACLK_400_MCUISP 69 +#define CLK_DIV_EBI 70 +#define CLK_DIV_ACLK_200 71 +#define CLK_DIV_ACLK_160 72 +#define CLK_DIV_ACLK_100 73 +#define CLK_DIV_ACLK_266 74 +#define CLK_DIV_CAM1 75 +#define CLK_DIV_CAM_BLK 76 +#define CLK_DIV_MFC 77 +#define CLK_DIV_G3D 78 +#define CLK_DIV_MIPI0_PRE 79 +#define CLK_DIV_MIPI0 80 +#define CLK_DIV_FIMD0 81 +#define CLK_DIV_UART_ISP 82 +#define CLK_DIV_SPI1_ISP_PRE 83 +#define CLK_DIV_SPI1_ISP 84 +#define CLK_DIV_SPI0_ISP_PRE 85 +#define CLK_DIV_SPI0_ISP 86 +#define CLK_DIV_TSADC_PRE 87 +#define CLK_DIV_TSADC 88 +#define CLK_DIV_MMC1_PRE 89 +#define CLK_DIV_MMC1 90 +#define CLK_DIV_MMC0_PRE 91 +#define CLK_DIV_MMC0 92 +#define CLK_DIV_UART1 93 +#define CLK_DIV_UART0 94 +#define CLK_DIV_SPI1_PRE 95 +#define CLK_DIV_SPI1 96 +#define CLK_DIV_SPI0_PRE 97 +#define CLK_DIV_SPI0 98 +#define CLK_DIV_PCM 99 +#define CLK_DIV_AUDIO 100 +#define CLK_DIV_I2S 101 +#define CLK_DIV_CORE2 102 +#define CLK_DIV_APLL 103 +#define CLK_DIV_PCLK_DBG 104 +#define CLK_DIV_ATB 105 +#define CLK_DIV_COREM 106 +#define CLK_DIV_CORE 107 +#define CLK_DIV_HPM 108 +#define CLK_DIV_COPY 109 + +/* Gates */ +#define CLK_ASYNC_G3D 128 +#define CLK_ASYNC_MFCL 129 +#define CLK_PPMULEFT 130 +#define CLK_GPIO_LEFT 131 +#define CLK_ASYNC_ISPMX 132 +#define CLK_ASYNC_FSYSD 133 +#define CLK_ASYNC_LCD0X 134 +#define CLK_ASYNC_CAMX 135 +#define CLK_PPMURIGHT 136 +#define CLK_GPIO_RIGHT 137 +#define CLK_MONOCNT 138 +#define CLK_TZPC6 139 +#define CLK_PROVISIONKEY1 140 +#define CLK_PROVISIONKEY0 141 +#define CLK_CMU_ISPPART 142 +#define CLK_TMU_APBIF 143 +#define CLK_KEYIF 144 +#define CLK_RTC 145 +#define CLK_WDT 146 +#define CLK_MCT 147 +#define CLK_SECKEY 148 +#define CLK_TZPC5 149 +#define CLK_TZPC4 150 +#define CLK_TZPC3 151 +#define CLK_TZPC2 152 +#define CLK_TZPC1 153 +#define CLK_TZPC0 154 +#define CLK_CMU_COREPART 155 +#define CLK_CMU_TOPPART 156 +#define CLK_PMU_APBIF 157 +#define CLK_SYSREG 158 +#define CLK_CHIP_ID 159 +#define CLK_QEJPEG 160 +#define CLK_PIXELASYNCM1 161 +#define CLK_PIXELASYNCM0 162 +#define CLK_PPMUCAMIF 163 +#define CLK_QEM2MSCALER 164 +#define CLK_QEGSCALER1 165 +#define CLK_QEGSCALER0 166 +#define CLK_SMMUJPEG 167 +#define CLK_SMMUM2M2SCALER 168 +#define CLK_SMMUGSCALER1 169 +#define CLK_SMMUGSCALER0 170 +#define CLK_JPEG 171 +#define CLK_M2MSCALER 172 +#define CLK_GSCALER1 173 +#define CLK_GSCALER0 174 +#define CLK_QEMFC 175 +#define CLK_PPMUMFC_L 176 +#define CLK_SMMUMFC_L 177 +#define CLK_MFC 178 +#define CLK_SMMUG3D 179 +#define CLK_QEG3D 180 +#define CLK_PPMUG3D 181 +#define CLK_G3D 182 +#define CLK_QE_CH1_LCD 183 +#define CLK_QE_CH0_LCD 184 +#define CLK_PPMULCD0 185 +#define CLK_SMMUFIMD0 186 +#define CLK_DSIM0 187 +#define CLK_FIMD0 188 +#define CLK_CAM1 189 +#define CLK_UART_ISP_TOP 190 +#define CLK_SPI1_ISP_TOP 191 +#define CLK_SPI0_ISP_TOP 192 +#define CLK_TSADC 193 +#define CLK_PPMUFILE 194 +#define CLK_USBOTG 195 +#define CLK_USBHOST 196 +#define CLK_SROMC 197 +#define CLK_SDMMC1 198 +#define CLK_SDMMC0 199 +#define CLK_PDMA1 200 +#define CLK_PDMA0 201 +#define CLK_PWM 202 +#define CLK_PCM 203 +#define CLK_I2S 204 +#define CLK_SPI1 205 +#define CLK_SPI0 206 +#define CLK_I2C7 207 +#define CLK_I2C6 208 +#define CLK_I2C5 209 +#define CLK_I2C4 210 +#define CLK_I2C3 211 +#define CLK_I2C2 212 +#define CLK_I2C1 213 +#define CLK_I2C0 214 +#define CLK_UART1 215 +#define CLK_UART0 216 +#define CLK_BLOCK_LCD 217 +#define CLK_BLOCK_G3D 218 +#define CLK_BLOCK_MFC 219 +#define CLK_BLOCK_CAM 220 +#define CLK_SMIES 221 + +/* Special clocks */ +#define CLK_SCLK_JPEG 224 +#define CLK_SCLK_M2MSCALER 225 +#define CLK_SCLK_GSCALER1 226 +#define CLK_SCLK_GSCALER0 227 +#define CLK_SCLK_MFC 228 +#define CLK_SCLK_G3D 229 +#define CLK_SCLK_MIPIDPHY2L 230 +#define CLK_SCLK_MIPI0 231 +#define CLK_SCLK_FIMD0 232 +#define CLK_SCLK_CAM1 233 +#define CLK_SCLK_UART_ISP 234 +#define CLK_SCLK_SPI1_ISP 235 +#define CLK_SCLK_SPI0_ISP 236 +#define CLK_SCLK_UPLL 237 +#define CLK_SCLK_TSADC 238 +#define CLK_SCLK_EBI 239 +#define CLK_SCLK_MMC1 240 +#define CLK_SCLK_MMC0 241 +#define CLK_SCLK_I2S 242 +#define CLK_SCLK_PCM 243 +#define CLK_SCLK_SPI1 244 +#define CLK_SCLK_SPI0 245 +#define CLK_SCLK_UART1 246 +#define CLK_SCLK_UART0 247 + +/* + * Total number of clocks of main CMU. + * NOTE: Must be equal to last clock ID increased by one. + */ +#define CLK_NR_CLKS 248 + +#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS3250_CLOCK_H */ diff --git a/include/dt-bindings/clock/exynos4.h b/include/dt-bindings/clock/exynos4.h index 75aff336dfb0..1106ca540a96 100644 --- a/include/dt-bindings/clock/exynos4.h +++ b/include/dt-bindings/clock/exynos4.h @@ -33,6 +33,7 @@ #define CLK_MOUT_MPLL_USER_C 18 /* Exynos4x12 only */ #define CLK_MOUT_CORE 19 #define CLK_MOUT_APLL 20 +#define CLK_SCLK_HDMIPHY 22 /* gate for special clocks (sclk) */ #define CLK_SCLK_FIMC0 128 @@ -181,7 +182,6 @@ #define CLK_KEYIF 347 #define CLK_AUDSS 348 #define CLK_MIPI_HSI 349 /* Exynos4210 only */ -#define CLK_MDMA2 350 /* Exynos4210 only */ #define CLK_PIXELASYNCM0 351 #define CLK_PIXELASYNCM1 352 #define CLK_FIMC_LITE0 353 /* Exynos4x12 only */ diff --git a/include/dt-bindings/clock/exynos5250.h b/include/dt-bindings/clock/exynos5250.h index 922f2dca9bf0..415d447e6e29 100644 --- a/include/dt-bindings/clock/exynos5250.h +++ b/include/dt-bindings/clock/exynos5250.h @@ -150,11 +150,14 @@ #define CLK_G2D 345 #define CLK_MDMA0 346 #define CLK_SMMU_MDMA0 347 +#define CLK_SSS 348 +#define CLK_G3D 349 /* mux clocks */ #define CLK_MOUT_HDMI 1024 +#define CLK_MOUT_GPLL 1025 /* must be greater than maximal clock id */ -#define CLK_NR_CLKS 1025 +#define CLK_NR_CLKS 1026 #endif /* _DT_BINDINGS_CLOCK_EXYNOS_5250_H */ diff --git a/include/dt-bindings/clock/exynos5260-clk.h b/include/dt-bindings/clock/exynos5260-clk.h new file mode 100644 index 000000000000..a4bac9a1764f --- /dev/null +++ b/include/dt-bindings/clock/exynos5260-clk.h @@ -0,0 +1,469 @@ +/* + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * Author: Rahul Sharma <rahul.sharma@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Provides Constants for Exynos5260 clocks. +*/ + +#ifndef _DT_BINDINGS_CLK_EXYNOS5260_H +#define _DT_BINDINGS_CLK_EXYNOS5260_H + +/* Clock names: <cmu><type><IP> */ + +/* List Of Clocks For CMU_TOP */ + +#define TOP_FOUT_DISP_PLL 1 +#define TOP_FOUT_AUD_PLL 2 +#define TOP_MOUT_AUDTOP_PLL_USER 3 +#define TOP_MOUT_AUD_PLL 4 +#define TOP_MOUT_DISP_PLL 5 +#define TOP_MOUT_BUSTOP_PLL_USER 6 +#define TOP_MOUT_MEMTOP_PLL_USER 7 +#define TOP_MOUT_MEDIATOP_PLL_USER 8 +#define TOP_MOUT_DISP_DISP_333 9 +#define TOP_MOUT_ACLK_DISP_333 10 +#define TOP_MOUT_DISP_DISP_222 11 +#define TOP_MOUT_ACLK_DISP_222 12 +#define TOP_MOUT_DISP_MEDIA_PIXEL 13 +#define TOP_MOUT_FIMD1 14 +#define TOP_MOUT_SCLK_PERI_SPI0_CLK 15 +#define TOP_MOUT_SCLK_PERI_SPI1_CLK 16 +#define TOP_MOUT_SCLK_PERI_SPI2_CLK 17 +#define TOP_MOUT_SCLK_PERI_UART0_UCLK 18 +#define TOP_MOUT_SCLK_PERI_UART2_UCLK 19 +#define TOP_MOUT_SCLK_PERI_UART1_UCLK 20 +#define TOP_MOUT_BUS4_BUSTOP_100 21 +#define TOP_MOUT_BUS4_BUSTOP_400 22 +#define TOP_MOUT_BUS3_BUSTOP_100 23 +#define TOP_MOUT_BUS3_BUSTOP_400 24 +#define TOP_MOUT_BUS2_BUSTOP_400 25 +#define TOP_MOUT_BUS2_BUSTOP_100 26 +#define TOP_MOUT_BUS1_BUSTOP_100 27 +#define TOP_MOUT_BUS1_BUSTOP_400 28 +#define TOP_MOUT_SCLK_FSYS_USB 29 +#define TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A 30 +#define TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A 31 +#define TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A 32 +#define TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_B 33 +#define TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_B 34 +#define TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_B 35 +#define TOP_MOUT_ACLK_ISP1_266 36 +#define TOP_MOUT_ISP1_MEDIA_266 37 +#define TOP_MOUT_ACLK_ISP1_400 38 +#define TOP_MOUT_ISP1_MEDIA_400 39 +#define TOP_MOUT_SCLK_ISP1_SPI0 40 +#define TOP_MOUT_SCLK_ISP1_SPI1 41 +#define TOP_MOUT_SCLK_ISP1_UART 42 +#define TOP_MOUT_SCLK_ISP1_SENSOR2 43 +#define TOP_MOUT_SCLK_ISP1_SENSOR1 44 +#define TOP_MOUT_SCLK_ISP1_SENSOR0 45 +#define TOP_MOUT_ACLK_MFC_333 46 +#define TOP_MOUT_MFC_BUSTOP_333 47 +#define TOP_MOUT_ACLK_G2D_333 48 +#define TOP_MOUT_G2D_BUSTOP_333 49 +#define TOP_MOUT_ACLK_GSCL_FIMC 50 +#define TOP_MOUT_GSCL_BUSTOP_FIMC 51 +#define TOP_MOUT_ACLK_GSCL_333 52 +#define TOP_MOUT_GSCL_BUSTOP_333 53 +#define TOP_MOUT_ACLK_GSCL_400 54 +#define TOP_MOUT_M2M_MEDIATOP_400 55 +#define TOP_DOUT_ACLK_MFC_333 56 +#define TOP_DOUT_ACLK_G2D_333 57 +#define TOP_DOUT_SCLK_ISP1_SENSOR2_A 58 +#define TOP_DOUT_SCLK_ISP1_SENSOR1_A 59 +#define TOP_DOUT_SCLK_ISP1_SENSOR0_A 60 +#define TOP_DOUT_ACLK_GSCL_FIMC 61 +#define TOP_DOUT_ACLK_GSCL_400 62 +#define TOP_DOUT_ACLK_GSCL_333 63 +#define TOP_DOUT_SCLK_ISP1_SPI0_B 64 +#define TOP_DOUT_SCLK_ISP1_SPI0_A 65 +#define TOP_DOUT_ACLK_ISP1_400 66 +#define TOP_DOUT_ACLK_ISP1_266 67 +#define TOP_DOUT_SCLK_ISP1_UART 68 +#define TOP_DOUT_SCLK_ISP1_SPI1_B 69 +#define TOP_DOUT_SCLK_ISP1_SPI1_A 70 +#define TOP_DOUT_SCLK_ISP1_SENSOR2_B 71 +#define TOP_DOUT_SCLK_ISP1_SENSOR1_B 72 +#define TOP_DOUT_SCLK_ISP1_SENSOR0_B 73 +#define TOP_DOUTTOP__SCLK_HPM_TARGETCLK 74 +#define TOP_DOUT_SCLK_DISP_PIXEL 75 +#define TOP_DOUT_ACLK_DISP_222 76 +#define TOP_DOUT_ACLK_DISP_333 77 +#define TOP_DOUT_ACLK_BUS4_100 78 +#define TOP_DOUT_ACLK_BUS4_400 79 +#define TOP_DOUT_ACLK_BUS3_100 80 +#define TOP_DOUT_ACLK_BUS3_400 81 +#define TOP_DOUT_ACLK_BUS2_100 82 +#define TOP_DOUT_ACLK_BUS2_400 83 +#define TOP_DOUT_ACLK_BUS1_100 84 +#define TOP_DOUT_ACLK_BUS1_400 85 +#define TOP_DOUT_SCLK_PERI_SPI1_B 86 +#define TOP_DOUT_SCLK_PERI_SPI1_A 87 +#define TOP_DOUT_SCLK_PERI_SPI0_B 88 +#define TOP_DOUT_SCLK_PERI_SPI0_A 89 +#define TOP_DOUT_SCLK_PERI_UART0 90 +#define TOP_DOUT_SCLK_PERI_UART2 91 +#define TOP_DOUT_SCLK_PERI_UART1 92 +#define TOP_DOUT_SCLK_PERI_SPI2_B 93 +#define TOP_DOUT_SCLK_PERI_SPI2_A 94 +#define TOP_DOUT_ACLK_PERI_AUD 95 +#define TOP_DOUT_ACLK_PERI_66 96 +#define TOP_DOUT_SCLK_FSYS_MMC0_SDCLKIN_B 97 +#define TOP_DOUT_SCLK_FSYS_MMC0_SDCLKIN_A 98 +#define TOP_DOUT_SCLK_FSYS_USBDRD30_SUSPEND_CLK 99 +#define TOP_DOUT_ACLK_FSYS_200 100 +#define TOP_DOUT_SCLK_FSYS_MMC2_SDCLKIN_B 101 +#define TOP_DOUT_SCLK_FSYS_MMC2_SDCLKIN_A 102 +#define TOP_DOUT_SCLK_FSYS_MMC1_SDCLKIN_B 103 +#define TOP_DOUT_SCLK_FSYS_MMC1_SDCLKIN_A 104 +#define TOP_SCLK_FIMD1 105 +#define TOP_SCLK_MMC2 106 +#define TOP_SCLK_MMC1 107 +#define TOP_SCLK_MMC0 108 +#define PHYCLK_DPTX_PHY_CH3_TXD_CLK 109 +#define PHYCLK_DPTX_PHY_CH2_TXD_CLK 110 +#define PHYCLK_DPTX_PHY_CH1_TXD_CLK 111 +#define PHYCLK_DPTX_PHY_CH0_TXD_CLK 112 +#define phyclk_hdmi_phy_tmds_clko 113 +#define PHYCLK_HDMI_PHY_PIXEL_CLKO 114 +#define PHYCLK_HDMI_LINK_O_TMDS_CLKHI 115 +#define PHYCLK_MIPI_DPHY_4L_M_TXBYTECLKHS 116 +#define PHYCLK_DPTX_PHY_O_REF_CLK_24M 117 +#define PHYCLK_DPTX_PHY_CLK_DIV2 118 +#define PHYCLK_MIPI_DPHY_4L_M_RXCLKESC0 119 +#define PHYCLK_USBHOST20_PHY_PHYCLOCK 120 +#define PHYCLK_USBHOST20_PHY_FREECLK 121 +#define PHYCLK_USBHOST20_PHY_CLK48MOHCI 122 +#define PHYCLK_USBDRD30_UDRD30_PIPE_PCLK 123 +#define PHYCLK_USBDRD30_UDRD30_PHYCLOCK 124 +#define TOP_NR_CLK 125 + + +/* List Of Clocks For CMU_EGL */ + +#define EGL_FOUT_EGL_PLL 1 +#define EGL_FOUT_EGL_DPLL 2 +#define EGL_MOUT_EGL_B 3 +#define EGL_MOUT_EGL_PLL 4 +#define EGL_DOUT_EGL_PLL 5 +#define EGL_DOUT_EGL_PCLK_DBG 6 +#define EGL_DOUT_EGL_ATCLK 7 +#define EGL_DOUT_PCLK_EGL 8 +#define EGL_DOUT_ACLK_EGL 9 +#define EGL_DOUT_EGL2 10 +#define EGL_DOUT_EGL1 11 +#define EGL_NR_CLK 12 + + +/* List Of Clocks For CMU_KFC */ + +#define KFC_FOUT_KFC_PLL 1 +#define KFC_MOUT_KFC_PLL 2 +#define KFC_MOUT_KFC 3 +#define KFC_DOUT_KFC_PLL 4 +#define KFC_DOUT_PCLK_KFC 5 +#define KFC_DOUT_ACLK_KFC 6 +#define KFC_DOUT_KFC_PCLK_DBG 7 +#define KFC_DOUT_KFC_ATCLK 8 +#define KFC_DOUT_KFC2 9 +#define KFC_DOUT_KFC1 10 +#define KFC_NR_CLK 11 + + +/* List Of Clocks For CMU_MIF */ + +#define MIF_FOUT_MEM_PLL 1 +#define MIF_FOUT_MEDIA_PLL 2 +#define MIF_FOUT_BUS_PLL 3 +#define MIF_MOUT_CLK2X_PHY 4 +#define MIF_MOUT_MIF_DREX2X 5 +#define MIF_MOUT_CLKM_PHY 6 +#define MIF_MOUT_MIF_DREX 7 +#define MIF_MOUT_MEDIA_PLL 8 +#define MIF_MOUT_BUS_PLL 9 +#define MIF_MOUT_MEM_PLL 10 +#define MIF_DOUT_ACLK_BUS_100 11 +#define MIF_DOUT_ACLK_BUS_200 12 +#define MIF_DOUT_ACLK_MIF_466 13 +#define MIF_DOUT_CLK2X_PHY 14 +#define MIF_DOUT_CLKM_PHY 15 +#define MIF_DOUT_BUS_PLL 16 +#define MIF_DOUT_MEM_PLL 17 +#define MIF_DOUT_MEDIA_PLL 18 +#define MIF_CLK_LPDDR3PHY_WRAP1 19 +#define MIF_CLK_LPDDR3PHY_WRAP0 20 +#define MIF_CLK_MONOCNT 21 +#define MIF_CLK_MIF_RTC 22 +#define MIF_CLK_DREX1 23 +#define MIF_CLK_DREX0 24 +#define MIF_CLK_INTMEM 25 +#define MIF_SCLK_LPDDR3PHY_WRAP_U1 26 +#define MIF_SCLK_LPDDR3PHY_WRAP_U0 27 +#define MIF_NR_CLK 28 + + +/* List Of Clocks For CMU_G3D */ + +#define G3D_FOUT_G3D_PLL 1 +#define G3D_MOUT_G3D_PLL 2 +#define G3D_DOUT_PCLK_G3D 3 +#define G3D_DOUT_ACLK_G3D 4 +#define G3D_CLK_G3D_HPM 5 +#define G3D_CLK_G3D 6 +#define G3D_NR_CLK 7 + + +/* List Of Clocks For CMU_AUD */ + +#define AUD_MOUT_SCLK_AUD_PCM 1 +#define AUD_MOUT_SCLK_AUD_I2S 2 +#define AUD_MOUT_AUD_PLL_USER 3 +#define AUD_DOUT_ACLK_AUD_131 4 +#define AUD_DOUT_SCLK_AUD_UART 5 +#define AUD_DOUT_SCLK_AUD_PCM 6 +#define AUD_DOUT_SCLK_AUD_I2S 7 +#define AUD_CLK_AUD_UART 8 +#define AUD_CLK_PCM 9 +#define AUD_CLK_I2S 10 +#define AUD_CLK_DMAC 11 +#define AUD_CLK_SRAMC 12 +#define AUD_SCLK_AUD_UART 13 +#define AUD_SCLK_PCM 14 +#define AUD_SCLK_I2S 15 +#define AUD_NR_CLK 16 + + +/* List Of Clocks For CMU_MFC */ + +#define MFC_MOUT_ACLK_MFC_333_USER 1 +#define MFC_DOUT_PCLK_MFC_83 2 +#define MFC_CLK_MFC 3 +#define MFC_CLK_SMMU2_MFCM1 4 +#define MFC_CLK_SMMU2_MFCM0 5 +#define MFC_NR_CLK 6 + + +/* List Of Clocks For CMU_GSCL */ + +#define GSCL_MOUT_ACLK_CSIS 1 +#define GSCL_MOUT_ACLK_GSCL_FIMC_USER 2 +#define GSCL_MOUT_ACLK_M2M_400_USER 3 +#define GSCL_MOUT_ACLK_GSCL_333_USER 4 +#define GSCL_DOUT_ACLK_CSIS_200 5 +#define GSCL_DOUT_PCLK_M2M_100 6 +#define GSCL_CLK_PIXEL_GSCL1 7 +#define GSCL_CLK_PIXEL_GSCL0 8 +#define GSCL_CLK_MSCL1 9 +#define GSCL_CLK_MSCL0 10 +#define GSCL_CLK_GSCL1 11 +#define GSCL_CLK_GSCL0 12 +#define GSCL_CLK_FIMC_LITE_D 13 +#define GSCL_CLK_FIMC_LITE_B 14 +#define GSCL_CLK_FIMC_LITE_A 15 +#define GSCL_CLK_CSIS1 16 +#define GSCL_CLK_CSIS0 17 +#define GSCL_CLK_SMMU3_LITE_D 18 +#define GSCL_CLK_SMMU3_LITE_B 19 +#define GSCL_CLK_SMMU3_LITE_A 20 +#define GSCL_CLK_SMMU3_GSCL0 21 +#define GSCL_CLK_SMMU3_GSCL1 22 +#define GSCL_CLK_SMMU3_MSCL0 23 +#define GSCL_CLK_SMMU3_MSCL1 24 +#define GSCL_SCLK_CSIS1_WRAP 25 +#define GSCL_SCLK_CSIS0_WRAP 26 +#define GSCL_NR_CLK 27 + + +/* List Of Clocks For CMU_FSYS */ + +#define FSYS_MOUT_PHYCLK_USBHOST20_PHYCLK_USER 1 +#define FSYS_MOUT_PHYCLK_USBHOST20_FREECLK_USER 2 +#define FSYS_MOUT_PHYCLK_USBHOST20_CLK48MOHCI_USER 3 +#define FSYS_MOUT_PHYCLK_USBDRD30_PIPE_PCLK_USER 4 +#define FSYS_MOUT_PHYCLK_USBDRD30_PHYCLOCK_USER 5 +#define FSYS_CLK_TSI 6 +#define FSYS_CLK_USBLINK 7 +#define FSYS_CLK_USBHOST20 8 +#define FSYS_CLK_USBDRD30 9 +#define FSYS_CLK_SROMC 10 +#define FSYS_CLK_PDMA 11 +#define FSYS_CLK_MMC2 12 +#define FSYS_CLK_MMC1 13 +#define FSYS_CLK_MMC0 14 +#define FSYS_CLK_RTIC 15 +#define FSYS_CLK_SMMU_RTIC 16 +#define FSYS_PHYCLK_USBDRD30 17 +#define FSYS_PHYCLK_USBHOST20 18 +#define FSYS_NR_CLK 19 + + +/* List Of Clocks For CMU_PERI */ + +#define PERI_MOUT_SCLK_SPDIF 1 +#define PERI_MOUT_SCLK_I2SCOD 2 +#define PERI_MOUT_SCLK_PCM 3 +#define PERI_DOUT_I2S 4 +#define PERI_DOUT_PCM 5 +#define PERI_CLK_WDT_KFC 6 +#define PERI_CLK_WDT_EGL 7 +#define PERI_CLK_HSIC3 8 +#define PERI_CLK_HSIC2 9 +#define PERI_CLK_HSIC1 10 +#define PERI_CLK_HSIC0 11 +#define PERI_CLK_PCM 12 +#define PERI_CLK_MCT 13 +#define PERI_CLK_I2S 14 +#define PERI_CLK_I2CHDMI 15 +#define PERI_CLK_I2C7 16 +#define PERI_CLK_I2C6 17 +#define PERI_CLK_I2C5 18 +#define PERI_CLK_I2C4 19 +#define PERI_CLK_I2C9 20 +#define PERI_CLK_I2C8 21 +#define PERI_CLK_I2C11 22 +#define PERI_CLK_I2C10 23 +#define PERI_CLK_HDMICEC 24 +#define PERI_CLK_EFUSE_WRITER 25 +#define PERI_CLK_ABB 26 +#define PERI_CLK_UART2 27 +#define PERI_CLK_UART1 28 +#define PERI_CLK_UART0 29 +#define PERI_CLK_ADC 30 +#define PERI_CLK_TMU4 31 +#define PERI_CLK_TMU3 32 +#define PERI_CLK_TMU2 33 +#define PERI_CLK_TMU1 34 +#define PERI_CLK_TMU0 35 +#define PERI_CLK_SPI2 36 +#define PERI_CLK_SPI1 37 +#define PERI_CLK_SPI0 38 +#define PERI_CLK_SPDIF 39 +#define PERI_CLK_PWM 40 +#define PERI_CLK_UART4 41 +#define PERI_CLK_CHIPID 42 +#define PERI_CLK_PROVKEY0 43 +#define PERI_CLK_PROVKEY1 44 +#define PERI_CLK_SECKEY 45 +#define PERI_CLK_TOP_RTC 46 +#define PERI_CLK_TZPC10 47 +#define PERI_CLK_TZPC9 48 +#define PERI_CLK_TZPC8 49 +#define PERI_CLK_TZPC7 50 +#define PERI_CLK_TZPC6 51 +#define PERI_CLK_TZPC5 52 +#define PERI_CLK_TZPC4 53 +#define PERI_CLK_TZPC3 54 +#define PERI_CLK_TZPC2 55 +#define PERI_CLK_TZPC1 56 +#define PERI_CLK_TZPC0 57 +#define PERI_SCLK_UART2 58 +#define PERI_SCLK_UART1 59 +#define PERI_SCLK_UART0 60 +#define PERI_SCLK_SPI2 61 +#define PERI_SCLK_SPI1 62 +#define PERI_SCLK_SPI0 63 +#define PERI_SCLK_SPDIF 64 +#define PERI_SCLK_I2S 65 +#define PERI_SCLK_PCM1 66 +#define PERI_NR_CLK 67 + + +/* List Of Clocks For CMU_DISP */ + +#define DISP_MOUT_SCLK_HDMI_SPDIF 1 +#define DISP_MOUT_SCLK_HDMI_PIXEL 2 +#define DISP_MOUT_PHYCLK_MIPI_DPHY_4LMRXCLK_ESC0_USER 3 +#define DISP_MOUT_PHYCLK_HDMI_PHY_TMDS_CLKO_USER 4 +#define DISP_MOUT_PHYCLK_HDMI_PHY_REF_CLKO_USER 5 +#define DISP_MOUT_HDMI_PHY_PIXEL 6 +#define DISP_MOUT_PHYCLK_HDMI_LINK_O_TMDS_CLKHI_USER 7 +#define DISP_MOUT_PHYCLK_MIPI_DPHY_4L_M_TXBYTE_CLKHS 8 +#define DISP_MOUT_PHYCLK_DPTX_PHY_O_REF_CLK_24M_USER 9 +#define DISP_MOUT_PHYCLK_DPTX_PHY_CLK_DIV2_USER 10 +#define DISP_MOUT_PHYCLK_DPTX_PHY_CH3_TXD_CLK_USER 11 +#define DISP_MOUT_PHYCLK_DPTX_PHY_CH2_TXD_CLK_USER 12 +#define DISP_MOUT_PHYCLK_DPTX_PHY_CH1_TXD_CLK_USER 13 +#define DISP_MOUT_PHYCLK_DPTX_PHY_CH0_TXD_CLK_USER 14 +#define DISP_MOUT_ACLK_DISP_222_USER 15 +#define DISP_MOUT_SCLK_DISP_PIXEL_USER 16 +#define DISP_MOUT_ACLK_DISP_333_USER 17 +#define DISP_DOUT_SCLK_HDMI_PHY_PIXEL_CLKI 18 +#define DISP_DOUT_SCLK_FIMD1_EXTCLKPLL 19 +#define DISP_DOUT_PCLK_DISP_111 20 +#define DISP_CLK_SMMU_TV 21 +#define DISP_CLK_SMMU_FIMD1M1 22 +#define DISP_CLK_SMMU_FIMD1M0 23 +#define DISP_CLK_PIXEL_MIXER 24 +#define DISP_CLK_PIXEL_DISP 25 +#define DISP_CLK_MIXER 26 +#define DISP_CLK_MIPIPHY 27 +#define DISP_CLK_HDMIPHY 28 +#define DISP_CLK_HDMI 29 +#define DISP_CLK_FIMD1 30 +#define DISP_CLK_DSIM1 31 +#define DISP_CLK_DPPHY 32 +#define DISP_CLK_DP 33 +#define DISP_SCLK_PIXEL 34 +#define DISP_MOUT_HDMI_PHY_PIXEL_USER 35 +#define DISP_NR_CLK 36 + + +/* List Of Clocks For CMU_G2D */ + +#define G2D_MOUT_ACLK_G2D_333_USER 1 +#define G2D_DOUT_PCLK_G2D_83 2 +#define G2D_CLK_SMMU3_JPEG 3 +#define G2D_CLK_MDMA 4 +#define G2D_CLK_JPEG 5 +#define G2D_CLK_G2D 6 +#define G2D_CLK_SSS 7 +#define G2D_CLK_SLIM_SSS 8 +#define G2D_CLK_SMMU_SLIM_SSS 9 +#define G2D_CLK_SMMU_SSS 10 +#define G2D_CLK_SMMU_MDMA 11 +#define G2D_CLK_SMMU3_G2D 12 +#define G2D_NR_CLK 13 + + +/* List Of Clocks For CMU_ISP */ + +#define ISP_MOUT_ISP_400_USER 1 +#define ISP_MOUT_ISP_266_USER 2 +#define ISP_DOUT_SCLK_MPWM 3 +#define ISP_DOUT_CA5_PCLKDBG 4 +#define ISP_DOUT_CA5_ATCLKIN 5 +#define ISP_DOUT_PCLK_ISP_133 6 +#define ISP_DOUT_PCLK_ISP_66 7 +#define ISP_CLK_GIC 8 +#define ISP_CLK_WDT 9 +#define ISP_CLK_UART 10 +#define ISP_CLK_SPI1 11 +#define ISP_CLK_SPI0 12 +#define ISP_CLK_SMMU_SCALERP 13 +#define ISP_CLK_SMMU_SCALERC 14 +#define ISP_CLK_SMMU_ISPCX 15 +#define ISP_CLK_SMMU_ISP 16 +#define ISP_CLK_SMMU_FD 17 +#define ISP_CLK_SMMU_DRC 18 +#define ISP_CLK_PWM 19 +#define ISP_CLK_MTCADC 20 +#define ISP_CLK_MPWM 21 +#define ISP_CLK_MCUCTL 22 +#define ISP_CLK_I2C1 23 +#define ISP_CLK_I2C0 24 +#define ISP_CLK_FIMC_SCALERP 25 +#define ISP_CLK_FIMC_SCALERC 26 +#define ISP_CLK_FIMC 27 +#define ISP_CLK_FIMC_FD 28 +#define ISP_CLK_FIMC_DRC 29 +#define ISP_CLK_CA5 30 +#define ISP_SCLK_SPI0_EXT 31 +#define ISP_SCLK_SPI1_EXT 32 +#define ISP_SCLK_UART_EXT 33 +#define ISP_NR_CLK 34 + +#endif diff --git a/include/dt-bindings/clock/exynos5420.h b/include/dt-bindings/clock/exynos5420.h index 5eefd8813f02..97dcb89d37d3 100644 --- a/include/dt-bindings/clock/exynos5420.h +++ b/include/dt-bindings/clock/exynos5420.h @@ -58,6 +58,9 @@ #define CLK_SCLK_GSCL_WA 156 #define CLK_SCLK_GSCL_WB 157 #define CLK_SCLK_HDMIPHY 158 +#define CLK_MAU_EPLL 159 +#define CLK_SCLK_HSIC_12M 160 +#define CLK_SCLK_MPHY_IXTAL24 161 /* gate clocks */ #define CLK_ACLK66_PERIC 256 @@ -69,10 +72,10 @@ #define CLK_I2C1 262 #define CLK_I2C2 263 #define CLK_I2C3 264 -#define CLK_I2C4 265 -#define CLK_I2C5 266 -#define CLK_I2C6 267 -#define CLK_I2C7 268 +#define CLK_USI0 265 +#define CLK_USI1 266 +#define CLK_USI2 267 +#define CLK_USI3 268 #define CLK_I2C_HDMI 269 #define CLK_TSADC 270 #define CLK_SPI0 271 @@ -85,9 +88,9 @@ #define CLK_PCM2 278 #define CLK_PWM 279 #define CLK_SPDIF 280 -#define CLK_I2C8 281 -#define CLK_I2C9 282 -#define CLK_I2C10 283 +#define CLK_USI4 281 +#define CLK_USI5 282 +#define CLK_USI6 283 #define CLK_ACLK66_PSGEN 300 #define CLK_CHIPID 301 #define CLK_SYSREG 302 @@ -140,7 +143,8 @@ #define CLK_HDMI 413 #define CLK_ACLK300_DISP1 420 #define CLK_FIMD1 421 -#define CLK_SMMU_FIMD1 422 +#define CLK_SMMU_FIMD1M0 422 +#define CLK_SMMU_FIMD1M1 423 #define CLK_ACLK166 430 #define CLK_MIXER 431 #define CLK_ACLK266 440 @@ -152,6 +156,7 @@ #define CLK_JPEG 451 #define CLK_JPEG2 452 #define CLK_SMMU_JPEG 453 +#define CLK_SMMU_JPEG2 454 #define CLK_ACLK300_GSCL 460 #define CLK_SMMU_GSCL0 461 #define CLK_SMMU_GSCL1 462 @@ -159,7 +164,7 @@ #define CLK_GSCL_WB 464 #define CLK_GSCL0 465 #define CLK_GSCL1 466 -#define CLK_CLK_3AA 467 +#define CLK_FIMC_3AA 467 #define CLK_ACLK266_G2D 470 #define CLK_SSS 471 #define CLK_SLIM_SSS 472 @@ -172,12 +177,32 @@ #define CLK_SMMU_FIMCL1 493 #define CLK_SMMU_FIMCL3 494 #define CLK_FIMC_LITE3 495 +#define CLK_FIMC_LITE0 496 +#define CLK_FIMC_LITE1 497 #define CLK_ACLK_G3D 500 #define CLK_G3D 501 #define CLK_SMMU_MIXER 502 +#define CLK_SMMU_G2D 503 +#define CLK_SMMU_MDMA0 504 +#define CLK_MC 505 +#define CLK_TOP_RTC 506 +#define CLK_SCLK_UART_ISP 510 +#define CLK_SCLK_SPI0_ISP 511 +#define CLK_SCLK_SPI1_ISP 512 +#define CLK_SCLK_PWM_ISP 513 +#define CLK_SCLK_ISP_SENSOR0 514 +#define CLK_SCLK_ISP_SENSOR1 515 +#define CLK_SCLK_ISP_SENSOR2 516 +#define CLK_ACLK432_SCALER 517 +#define CLK_ACLK432_CAM 518 +#define CLK_ACLK_FL1550_CAM 519 +#define CLK_ACLK550_CAM 520 /* mux clocks */ #define CLK_MOUT_HDMI 640 +#define CLK_MOUT_G3D 641 +#define CLK_MOUT_VPLL 642 +#define CLK_MOUT_MAUDIO0 643 /* divider clocks */ #define CLK_DOUT_PIXEL 768 diff --git a/include/dt-bindings/clock/s3c2410.h b/include/dt-bindings/clock/s3c2410.h new file mode 100644 index 000000000000..352a7673fc69 --- /dev/null +++ b/include/dt-bindings/clock/s3c2410.h @@ -0,0 +1,62 @@ +/* + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Device Tree binding constants clock controllers of Samsung S3C2410 and later. + */ + +#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S3C2410_CLOCK_H +#define _DT_BINDINGS_CLOCK_SAMSUNG_S3C2410_CLOCK_H + +/* + * Let each exported clock get a unique index, which is used on DT-enabled + * platforms to lookup the clock from a clock specifier. These indices are + * therefore considered an ABI and so must not be changed. This implies + * that new clocks should be added either in free spaces between clock groups + * or at the end. + */ + +/* Core clocks. */ + +/* id 1 is reserved */ +#define MPLL 2 +#define UPLL 3 +#define FCLK 4 +#define HCLK 5 +#define PCLK 6 +#define UCLK 7 +#define ARMCLK 8 + +/* pclk-gates */ +#define PCLK_UART0 16 +#define PCLK_UART1 17 +#define PCLK_UART2 18 +#define PCLK_I2C 19 +#define PCLK_SDI 20 +#define PCLK_SPI 21 +#define PCLK_ADC 22 +#define PCLK_AC97 23 +#define PCLK_I2S 24 +#define PCLK_PWM 25 +#define PCLK_RTC 26 +#define PCLK_GPIO 27 + + +/* hclk-gates */ +#define HCLK_LCD 32 +#define HCLK_USBH 33 +#define HCLK_USBD 34 +#define HCLK_NAND 35 +#define HCLK_CAM 36 + + +#define CAMIF 40 + + +/* Total number of clocks. */ +#define NR_CLKS (CAMIF + 1) + +#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H */ diff --git a/include/dt-bindings/clock/s3c2412.h b/include/dt-bindings/clock/s3c2412.h new file mode 100644 index 000000000000..aac1dcfda81c --- /dev/null +++ b/include/dt-bindings/clock/s3c2412.h @@ -0,0 +1,73 @@ +/* + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Device Tree binding constants clock controllers of Samsung S3C2412. + */ + +#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S3C2412_CLOCK_H +#define _DT_BINDINGS_CLOCK_SAMSUNG_S3C2412_CLOCK_H + +/* + * Let each exported clock get a unique index, which is used on DT-enabled + * platforms to lookup the clock from a clock specifier. These indices are + * therefore considered an ABI and so must not be changed. This implies + * that new clocks should be added either in free spaces between clock groups + * or at the end. + */ + +/* Core clocks. */ + +/* id 1 is reserved */ +#define MPLL 2 +#define UPLL 3 +#define MDIVCLK 4 +#define MSYSCLK 5 +#define USYSCLK 6 +#define HCLK 7 +#define PCLK 8 +#define ARMDIV 9 +#define ARMCLK 10 + + +/* Special clocks */ +#define SCLK_CAM 16 +#define SCLK_UART 17 +#define SCLK_I2S 18 +#define SCLK_USBD 19 +#define SCLK_USBH 20 + +/* pclk-gates */ +#define PCLK_WDT 32 +#define PCLK_SPI 33 +#define PCLK_I2S 34 +#define PCLK_I2C 35 +#define PCLK_ADC 36 +#define PCLK_RTC 37 +#define PCLK_GPIO 38 +#define PCLK_UART2 39 +#define PCLK_UART1 40 +#define PCLK_UART0 41 +#define PCLK_SDI 42 +#define PCLK_PWM 43 +#define PCLK_USBD 44 + +/* hclk-gates */ +#define HCLK_HALF 48 +#define HCLK_X2 49 +#define HCLK_SDRAM 50 +#define HCLK_USBH 51 +#define HCLK_LCD 52 +#define HCLK_NAND 53 +#define HCLK_DMA3 54 +#define HCLK_DMA2 55 +#define HCLK_DMA1 56 +#define HCLK_DMA0 57 + +/* Total number of clocks. */ +#define NR_CLKS (HCLK_DMA0 + 1) + +#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S3C2412_CLOCK_H */ diff --git a/include/dt-bindings/clock/s3c2443.h b/include/dt-bindings/clock/s3c2443.h new file mode 100644 index 000000000000..37e66b054d64 --- /dev/null +++ b/include/dt-bindings/clock/s3c2443.h @@ -0,0 +1,92 @@ +/* + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Device Tree binding constants clock controllers of Samsung S3C2443 and later. + */ + +#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H +#define _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H + +/* + * Let each exported clock get a unique index, which is used on DT-enabled + * platforms to lookup the clock from a clock specifier. These indices are + * therefore considered an ABI and so must not be changed. This implies + * that new clocks should be added either in free spaces between clock groups + * or at the end. + */ + +/* Core clocks. */ +#define MSYSCLK 1 +#define ESYSCLK 2 +#define ARMDIV 3 +#define ARMCLK 4 +#define HCLK 5 +#define PCLK 6 + +/* Special clocks */ +#define SCLK_HSSPI0 16 +#define SCLK_FIMD 17 +#define SCLK_I2S0 18 +#define SCLK_I2S1 19 +#define SCLK_HSMMC1 20 +#define SCLK_HSMMC_EXT 21 +#define SCLK_CAM 22 +#define SCLK_UART 23 +#define SCLK_USBH 24 + +/* Muxes */ +#define MUX_HSSPI0 32 +#define MUX_HSSPI1 33 +#define MUX_HSMMC0 34 +#define MUX_HSMMC1 35 + +/* hclk-gates */ +#define HCLK_DMA0 48 +#define HCLK_DMA1 49 +#define HCLK_DMA2 50 +#define HCLK_DMA3 51 +#define HCLK_DMA4 52 +#define HCLK_DMA5 53 +#define HCLK_DMA6 54 +#define HCLK_DMA7 55 +#define HCLK_CAM 56 +#define HCLK_LCD 57 +#define HCLK_USBH 58 +#define HCLK_USBD 59 +#define HCLK_IROM 60 +#define HCLK_HSMMC0 61 +#define HCLK_HSMMC1 62 +#define HCLK_CFC 63 +#define HCLK_SSMC 64 +#define HCLK_DRAM 65 +#define HCLK_2D 66 + +/* pclk-gates */ +#define PCLK_UART0 72 +#define PCLK_UART1 73 +#define PCLK_UART2 74 +#define PCLK_UART3 75 +#define PCLK_I2C0 76 +#define PCLK_SDI 77 +#define PCLK_SPI0 78 +#define PCLK_ADC 79 +#define PCLK_AC97 80 +#define PCLK_I2S0 81 +#define PCLK_PWM 82 +#define PCLK_WDT 83 +#define PCLK_RTC 84 +#define PCLK_GPIO 85 +#define PCLK_SPI1 86 +#define PCLK_CHIPID 87 +#define PCLK_I2C1 88 +#define PCLK_I2S1 89 +#define PCLK_PCM 90 + +/* Total number of clocks. */ +#define NR_CLKS (PCLK_PCM + 1) + +#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H */ |