UAPI: (Scripted) Disintegrate include/linux

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>

1 files changed, 382 insertions, 0 deletions

diff --git a/include/uapi/linux/fd.h b/include/uapi/linux/fd.h
new file mode 100644
index 000000000000..f1f3dd5981b2
--- /dev/null
+++ b/include/uapi/linux/fd.h
@@ -0,0 +1,382 @@
+#ifndef _UAPI_LINUX_FD_H
+#define _UAPI_LINUX_FD_H
+
+#include <linux/ioctl.h>
+#include <linux/compiler.h>
+
+/* New file layout: Now the ioctl definitions immediately follow the
+ * definitions of the structures that they use */
+
+/*
+ * Geometry
+ */
+struct floppy_struct {
+	unsigned int	size,		/* nr of sectors total */
+			sect,		/* sectors per track */
+			head,		/* nr of heads */
+			track,		/* nr of tracks */
+			stretch;	/* bit 0 !=0 means double track steps */
+					/* bit 1 != 0 means swap sides */
+					/* bits 2..9 give the first sector */
+					/*  number (the LSB is flipped) */
+#define FD_STRETCH 1
+#define FD_SWAPSIDES 2
+#define FD_ZEROBASED 4
+#define FD_SECTBASEMASK 0x3FC
+#define FD_MKSECTBASE(s) (((s) ^ 1) << 2)
+#define FD_SECTBASE(floppy) ((((floppy)->stretch & FD_SECTBASEMASK) >> 2) ^ 1)
+
+	unsigned char	gap,		/* gap1 size */
+
+			rate,		/* data rate. |= 0x40 for perpendicular */
+#define FD_2M 0x4
+#define FD_SIZECODEMASK 0x38
+#define FD_SIZECODE(floppy) (((((floppy)->rate&FD_SIZECODEMASK)>> 3)+ 2) %8)
+#define FD_SECTSIZE(floppy) ( (floppy)->rate & FD_2M ? \
+			     512 : 128 << FD_SIZECODE(floppy) )
+#define FD_PERP 0x40
+
+			spec1,		/* stepping rate, head unload time */
+			fmt_gap;	/* gap2 size */
+	const char	* name; /* used only for predefined formats */
+};
+
+
+/* commands needing write access have 0x40 set */
+/* commands needing super user access have 0x80 set */
+
+#define FDCLRPRM _IO(2, 0x41)
+/* clear user-defined parameters */
+
+#define FDSETPRM _IOW(2, 0x42, struct floppy_struct) 
+#define FDSETMEDIAPRM FDSETPRM
+/* set user-defined parameters for current media */
+
+#define FDDEFPRM _IOW(2, 0x43, struct floppy_struct) 
+#define FDGETPRM _IOR(2, 0x04, struct floppy_struct)
+#define FDDEFMEDIAPRM FDDEFPRM
+#define FDGETMEDIAPRM FDGETPRM
+/* set/get disk parameters */
+
+
+#define	FDMSGON  _IO(2,0x45)
+#define	FDMSGOFF _IO(2,0x46)
+/* issue/don't issue kernel messages on media type change */
+
+
+/* 
+ * Formatting (obsolete)
+ */
+#define FD_FILL_BYTE 0xF6 /* format fill byte. */
+
+struct format_descr {
+	unsigned int device,head,track;
+};
+
+#define FDFMTBEG _IO(2,0x47)
+/* begin formatting a disk */
+#define	FDFMTTRK _IOW(2,0x48, struct format_descr)
+/* format the specified track */
+#define FDFMTEND _IO(2,0x49)
+/* end formatting a disk */
+
+
+/*
+ * Error thresholds
+ */
+struct floppy_max_errors {
+	unsigned int
+	  abort,      /* number of errors to be reached before aborting */
+	  read_track, /* maximal number of errors permitted to read an
+		       * entire track at once */
+	  reset,      /* maximal number of errors before a reset is tried */
+	  recal,      /* maximal number of errors before a recalibrate is
+		       * tried */
+
+	  /*
+	   * Threshold for reporting FDC errors to the console.
+	   * Setting this to zero may flood your screen when using
+	   * ultra cheap floppies ;-)
+	   */
+	  reporting;
+
+};
+
+#define FDSETEMSGTRESH	_IO(2,0x4a)
+/* set fdc error reporting threshold */
+
+#define FDFLUSH  _IO(2,0x4b)
+/* flush buffers for media; either for verifying media, or for
+ * handling a media change without closing the file descriptor */
+
+#define FDSETMAXERRS _IOW(2, 0x4c, struct floppy_max_errors)
+#define FDGETMAXERRS _IOR(2, 0x0e, struct floppy_max_errors)
+/* set/get abortion and read_track threshold. See also floppy_drive_params
+ * structure */
+
+
+typedef char floppy_drive_name[16];
+#define FDGETDRVTYP _IOR(2, 0x0f, floppy_drive_name)
+/* get drive type: 5 1/4 or 3 1/2 */
+
+
+/*
+ * Drive parameters (user modifiable)
+ */
+struct floppy_drive_params {
+	signed char cmos;		/* CMOS type */
+	
+	/* Spec2 is (HLD<<1 | ND), where HLD is head load time (1=2ms, 2=4 ms 
+	 * etc) and ND is set means no DMA. Hardcoded to 6 (HLD=6ms, use DMA).
+	 */
+	unsigned long max_dtr;		/* Step rate, usec */
+	unsigned long hlt;     		/* Head load/settle time, msec */
+	unsigned long hut;     		/* Head unload time (remnant of 
+					 * 8" drives) */
+	unsigned long srt;     		/* Step rate, usec */
+
+	unsigned long spinup;		/* time needed for spinup (expressed
+					 * in jiffies) */
+	unsigned long spindown;		/* timeout needed for spindown */
+	unsigned char spindown_offset;	/* decides in which position the disk
+					 * will stop */
+	unsigned char select_delay;	/* delay to wait after select */
+	unsigned char rps;		/* rotations per second */
+	unsigned char tracks;		/* maximum number of tracks */
+	unsigned long timeout;		/* timeout for interrupt requests */
+	
+	unsigned char interleave_sect;	/* if there are more sectors, use 
+					 * interleave */
+	
+	struct floppy_max_errors max_errors;
+	
+	char flags;			/* various flags, including ftd_msg */
+/*
+ * Announce successful media type detection and media information loss after
+ * disk changes.
+ * Also used to enable/disable printing of overrun warnings.
+ */
+
+#define FTD_MSG 0x10
+#define FD_BROKEN_DCL 0x20
+#define FD_DEBUG 0x02
+#define FD_SILENT_DCL_CLEAR 0x4
+#define FD_INVERTED_DCL 0x80 /* must be 0x80, because of hardware 
+				considerations */
+
+	char read_track;		/* use readtrack during probing? */
+
+/*
+ * Auto-detection. Each drive type has eight formats which are
+ * used in succession to try to read the disk. If the FDC cannot lock onto
+ * the disk, the next format is tried. This uses the variable 'probing'.
+ */
+	short autodetect[8];		/* autodetected formats */
+	
+	int checkfreq; /* how often should the drive be checked for disk 
+			* changes */
+	int native_format; /* native format of this drive */
+};
+
+enum {
+	FD_NEED_TWADDLE_BIT,	/* more magic */
+	FD_VERIFY_BIT,		/* inquire for write protection */
+	FD_DISK_NEWCHANGE_BIT,	/* change detected, and no action undertaken yet
+				 * to clear media change status */
+	FD_UNUSED_BIT,
+	FD_DISK_CHANGED_BIT,	/* disk has been changed since last i/o */
+	FD_DISK_WRITABLE_BIT	/* disk is writable */
+};
+
+#define FDSETDRVPRM _IOW(2, 0x90, struct floppy_drive_params)
+#define FDGETDRVPRM _IOR(2, 0x11, struct floppy_drive_params)
+/* set/get drive parameters */
+
+
+/*
+ * Current drive state (not directly modifiable by user, readonly)
+ */
+struct floppy_drive_struct {
+	unsigned long flags;
+/* values for these flags */
+#define FD_NEED_TWADDLE (1 << FD_NEED_TWADDLE_BIT)
+#define FD_VERIFY (1 << FD_VERIFY_BIT)
+#define FD_DISK_NEWCHANGE (1 << FD_DISK_NEWCHANGE_BIT)
+#define FD_DISK_CHANGED (1 << FD_DISK_CHANGED_BIT)
+#define FD_DISK_WRITABLE (1 << FD_DISK_WRITABLE_BIT)
+
+	unsigned long spinup_date;
+	unsigned long select_date;
+	unsigned long first_read_date;
+	short probed_format;
+	short track; /* current track */
+	short maxblock; /* id of highest block read */
+	short maxtrack; /* id of highest half track read */
+	int generation; /* how many diskchanges? */
+
+/*
+ * (User-provided) media information is _not_ discarded after a media change
+ * if the corresponding keep_data flag is non-zero. Positive values are
+ * decremented after each probe.
+ */
+	int keep_data;
+	
+	/* Prevent "aliased" accesses. */
+	int fd_ref;
+	int fd_device;
+	unsigned long last_checked; /* when was the drive last checked for a disk 
+			   * change? */
+	
+	char *dmabuf;
+	int bufblocks;
+};
+
+#define FDGETDRVSTAT _IOR(2, 0x12, struct floppy_drive_struct)
+#define FDPOLLDRVSTAT _IOR(2, 0x13, struct floppy_drive_struct)
+/* get drive state: GET returns the cached state, POLL polls for new state */
+
+
+/*
+ * reset FDC
+ */
+enum reset_mode {
+	FD_RESET_IF_NEEDED,	/* reset only if the reset flags is set */
+	FD_RESET_IF_RAWCMD,	/* obsolete */
+	FD_RESET_ALWAYS		/* reset always */
+};
+#define FDRESET _IO(2, 0x54)
+
+
+/*
+ * FDC state
+ */
+struct floppy_fdc_state {	
+	int spec1;		/* spec1 value last used */
+	int spec2;		/* spec2 value last used */
+	int dtr;
+	unsigned char version;	/* FDC version code */
+	unsigned char dor;
+	unsigned long address;	/* io address */
+	unsigned int rawcmd:2;
+	unsigned int reset:1;
+	unsigned int need_configure:1;
+	unsigned int perp_mode:2;
+	unsigned int has_fifo:1;
+	unsigned int driver_version;	/* version code for floppy driver */
+#define FD_DRIVER_VERSION 0x100
+/* user programs using the floppy API should use floppy_fdc_state to
+ * get the version number of the floppy driver that they are running
+ * on. If this version number is bigger than the one compiled into the
+ * user program (the FD_DRIVER_VERSION define), it should be prepared
+ * to bigger structures
+ */
+
+	unsigned char track[4];
+	/* Position of the heads of the 4 units attached to this FDC,
+	 * as stored on the FDC. In the future, the position as stored
+	 * on the FDC might not agree with the actual physical
+	 * position of these drive heads. By allowing such
+	 * disagreement, it will be possible to reset the FDC without
+	 * incurring the expensive cost of repositioning all heads.
+	 * Right now, these positions are hard wired to 0. */
+
+};
+
+#define FDGETFDCSTAT _IOR(2, 0x15, struct floppy_fdc_state)
+
+
+/*
+ * Asynchronous Write error tracking
+ */
+struct floppy_write_errors {
+	/* Write error logging.
+	 *
+	 * These fields can be cleared with the FDWERRORCLR ioctl.
+	 * Only writes that were attempted but failed due to a physical media
+	 * error are logged.  write(2) calls that fail and return an error code
+	 * to the user process are not counted.
+	 */
+
+	unsigned int write_errors;  /* number of physical write errors 
+				     * encountered */
+	
+	/* position of first and last write errors */
+	unsigned long first_error_sector;
+	int           first_error_generation;
+	unsigned long last_error_sector;
+	int           last_error_generation;
+	
+	unsigned int badness; /* highest retry count for a read or write 
+			       * operation */
+};
+
+#define FDWERRORCLR  _IO(2, 0x56)
+/* clear write error and badness information */
+#define FDWERRORGET  _IOR(2, 0x17, struct floppy_write_errors)
+/* get write error and badness information */
+
+
+/*
+ * Raw commands
+ */
+/* new interface flag: now we can do them in batches */
+#define FDHAVEBATCHEDRAWCMD
+
+struct floppy_raw_cmd {
+	unsigned int flags;
+#define FD_RAW_READ 1
+#define FD_RAW_WRITE 2
+#define FD_RAW_NO_MOTOR 4
+#define FD_RAW_DISK_CHANGE 4 /* out: disk change flag was set */
+#define FD_RAW_INTR 8    /* wait for an interrupt */
+#define FD_RAW_SPIN 0x10 /* spin up the disk for this command */
+#define FD_RAW_NO_MOTOR_AFTER 0x20 /* switch the motor off after command 
+				    * completion */
+#define FD_RAW_NEED_DISK 0x40  /* this command needs a disk to be present */
+#define FD_RAW_NEED_SEEK 0x80  /* this command uses an implied seek (soft) */
+
+/* more "in" flags */
+#define FD_RAW_MORE 0x100  /* more records follow */
+#define FD_RAW_STOP_IF_FAILURE 0x200 /* stop if we encounter a failure */
+#define FD_RAW_STOP_IF_SUCCESS 0x400 /* stop if command successful */
+#define FD_RAW_SOFTFAILURE 0x800 /* consider the return value for failure
+				  * detection too */
+
+/* more "out" flags */
+#define FD_RAW_FAILURE 0x10000 /* command sent to fdc, fdc returned error */
+#define FD_RAW_HARDFAILURE 0x20000 /* fdc had to be reset, or timed out */
+
+	void __user *data;
+	char *kernel_data; /* location of data buffer in the kernel */
+	struct floppy_raw_cmd *next; /* used for chaining of raw cmd's 
+				      * within the kernel */
+	long length; /* in: length of dma transfer. out: remaining bytes */
+	long phys_length; /* physical length, if different from dma length */
+	int buffer_length; /* length of allocated buffer */
+
+	unsigned char rate;
+	unsigned char cmd_count;
+	unsigned char cmd[16];
+	unsigned char reply_count;
+	unsigned char reply[16];
+	int track;
+	int resultcode;
+
+	int reserved1;
+	int reserved2;
+};
+
+#define FDRAWCMD _IO(2, 0x58)
+/* send a raw command to the fdc. Structure size not included, because of
+ * batches */
+
+#define FDTWADDLE _IO(2, 0x59)
+/* flicker motor-on bit before reading a sector. Experimental */
+
+
+#define FDEJECT _IO(2, 0x5a)
+/* eject the disk */
+
+
+
+#endif /* _UAPI_LINUX_FD_H */