diff options
| author | Javier Martinez Canillas <javier.martinez@collabora.co.uk> | 2013-06-24 17:13:23 +0200 |
|---|---|---|
| committer | Tony Lindgren <tony@atomide.com> | 2013-06-25 23:13:40 -0700 |
| commit | 397eada946712b90e0620c378b366bcc6c98c9f6 (patch) | |
| tree | 5a53948117108e915b462addc84afdae4d647768 /drivers | |
| parent | 9e895ace5d82df8929b16f58e9f515f6d54ab82d (diff) | |
gpio/omap: don't use linear domain mapping for OMAP1
Commit ede4d7a5 ("gpio/omap: convert gpio irq domain to linear mapping")
converted the OMAP GPIO driver to use a linear mapping for the GPIO IRQ
domain instead of using a legacy mapping. Not using a legacy mapping has
a number of benefits but it requires the platform to support SPARSE_IRQ
which currently is not supported on OMAP1.
So this change caused a regression on OMAP1 platforms [1].
Since this issue is not present on all OMAP2+ platforms, there is no need to
revert the driver to use legacy domain mapping for all the platforms.
[1]: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg89005.html
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/gpio/gpio-omap.c | 22 |
1 files changed, 21 insertions, 1 deletions
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index d3f7d2db870f..4a430360af5a 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -1094,6 +1094,9 @@ static int omap_gpio_probe(struct platform_device *pdev) const struct omap_gpio_platform_data *pdata; struct resource *res; struct gpio_bank *bank; +#ifdef CONFIG_ARCH_OMAP1 + int irq_base; +#endif match = of_match_device(of_match_ptr(omap_gpio_match), dev); @@ -1135,11 +1138,28 @@ static int omap_gpio_probe(struct platform_device *pdev) pdata->get_context_loss_count; } +#ifdef CONFIG_ARCH_OMAP1 + /* + * REVISIT: Once we have OMAP1 supporting SPARSE_IRQ, we can drop + * irq_alloc_descs() and irq_domain_add_legacy() and just use a + * linear IRQ domain mapping for all OMAP platforms. + */ + irq_base = irq_alloc_descs(-1, 0, bank->width, 0); + if (irq_base < 0) { + dev_err(dev, "Couldn't allocate IRQ numbers\n"); + return -ENODEV; + } + bank->domain = irq_domain_add_legacy(node, bank->width, irq_base, + 0, &irq_domain_simple_ops, NULL); +#else bank->domain = irq_domain_add_linear(node, bank->width, &irq_domain_simple_ops, NULL); - if (!bank->domain) +#endif + if (!bank->domain) { + dev_err(dev, "Couldn't register an IRQ domain\n"); return -ENODEV; + } if (bank->regs->set_dataout && bank->regs->clr_dataout) bank->set_dataout = _set_gpio_dataout_reg; |