staging: rtl8732au: Partial clean up of rtl8723a_rf6052.c

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 123 insertions, 106 deletions

diff --git a/drivers/staging/rtl8723au/hal/rtl8723a_rf6052.c b/drivers/staging/rtl8723au/hal/rtl8723a_rf6052.c
index 2dc0886e5f90..1aad4384471c 100644
--- a/drivers/staging/rtl8723au/hal/rtl8723a_rf6052.c
+++ b/drivers/staging/rtl8723au/hal/rtl8723a_rf6052.c
@@ -42,21 +42,6 @@
 #include <rtl8723a_hal.h>
 #include <usb_ops_linux.h>
 
-/*---------------------------Define Local Constant---------------------------*/
-/*  Define local structure for debug!!!!! */
-struct rf_shadow_compare_map {
-	/*  Shadow register value */
-	u32		Value;
-	/*  Compare or not flag */
-	u8		Compare;
-	/*  Record If it had ever modified unpredicted */
-	u8		ErrorOrNot;
-	/*  Recorver Flag */
-	u8		Recorver;
-	/*  */
-	u8		Driver_Write;
-};
-
 /*-----------------------------------------------------------------------------
  * Function:    PHY_RF6052SetBandwidth()
  *
@@ -71,20 +56,23 @@ struct rf_shadow_compare_map {
  *
  * Note:		For RF type 0222D
  *---------------------------------------------------------------------------*/
-void rtl8723a_phy_rf6052set_bw(
-	struct rtw_adapter *Adapter,
-	enum ht_channel_width Bandwidth)	/* 20M or 40M */
+void rtl8723a_phy_rf6052set_bw(struct rtw_adapter *Adapter,
+			       enum ht_channel_width Bandwidth)	/* 20M or 40M */
 {
-	struct hal_data_8723a	*pHalData = GET_HAL_DATA(Adapter);
+	struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
 
 	switch (Bandwidth) {
 	case HT_CHANNEL_WIDTH_20:
-		pHalData->RfRegChnlVal[0] = ((pHalData->RfRegChnlVal[0] & 0xfffff3ff) | 0x0400);
-		PHY_SetRFReg(Adapter, RF_PATH_A, RF_CHNLBW, bRFRegOffsetMask, pHalData->RfRegChnlVal[0]);
+		pHalData->RfRegChnlVal[0] =
+			(pHalData->RfRegChnlVal[0] & 0xfffff3ff) | 0x0400;
+		PHY_SetRFReg(Adapter, RF_PATH_A, RF_CHNLBW, bRFRegOffsetMask,
+			     pHalData->RfRegChnlVal[0]);
 		break;
 	case HT_CHANNEL_WIDTH_40:
-		pHalData->RfRegChnlVal[0] = ((pHalData->RfRegChnlVal[0] & 0xfffff3ff));
-		PHY_SetRFReg(Adapter, RF_PATH_A, RF_CHNLBW, bRFRegOffsetMask, pHalData->RfRegChnlVal[0]);
+		pHalData->RfRegChnlVal[0] =
+			(pHalData->RfRegChnlVal[0] & 0xfffff3ff);
+		PHY_SetRFReg(Adapter, RF_PATH_A, RF_CHNLBW, bRFRegOffsetMask,
+			     pHalData->RfRegChnlVal[0]);
 		break;
 	default:
 		break;
@@ -108,7 +96,8 @@ void rtl8723a_phy_rf6052set_bw(
  *
  *---------------------------------------------------------------------------*/
 
-void rtl823a_phy_rf6052setccktxpower(struct rtw_adapter *Adapter, u8 *pPowerlevel)
+void rtl823a_phy_rf6052setccktxpower(struct rtw_adapter *Adapter,
+				     u8 *pPowerlevel)
 {
 	struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
 	struct dm_priv *pdmpriv = &pHalData->dmpriv;
@@ -118,7 +107,8 @@ void rtl823a_phy_rf6052setccktxpower(struct rtw_adapter *Adapter, u8 *pPowerleve
 	u8 idx1, idx2;
 	u8 *ptr;
 
-	/*  According to SD3 eechou's suggestion, we need to disable turbo scan for RU. */
+	/*  According to SD3 eechou's suggestion, we need to disable
+	    turbo scan for RU. */
 	/*  Otherwise, external PA will be broken if power index > 0x20. */
 	if (pHalData->EEPROMRegulatory != 0 || pHalData->ExternalPA)
 		TurboScanOff = true;
@@ -131,29 +121,37 @@ void rtl823a_phy_rf6052setccktxpower(struct rtw_adapter *Adapter, u8 *pPowerleve
 
 		if (TurboScanOff) {
 			for (idx1 = RF_PATH_A; idx1 <= RF_PATH_B; idx1++) {
-				TxAGC[idx1] =
-					pPowerlevel[idx1] | (pPowerlevel[idx1]<<8) |
-					(pPowerlevel[idx1]<<16) | (pPowerlevel[idx1]<<24);
-				/*  2010/10/18 MH For external PA module. We need to limit power index to be less than 0x20. */
+				TxAGC[idx1] = pPowerlevel[idx1] |
+					(pPowerlevel[idx1] << 8) |
+					(pPowerlevel[idx1] << 16) |
+					(pPowerlevel[idx1] << 24);
+				/*  2010/10/18 MH For external PA module.
+				    We need to limit power index to be less
+				    than 0x20. */
 				if (TxAGC[idx1] > 0x20 && pHalData->ExternalPA)
 					TxAGC[idx1] = 0x20;
 			}
 		}
 	} else {
-/*  20100427 Joseph: Driver dynamic Tx power shall not affect Tx power. It shall be determined by power training mechanism. */
-/*  Currently, we cannot fully disable driver dynamic tx power mechanism because it is referenced by BT coexist mechanism. */
-/*  In the future, two mechanism shall be separated from each other and maintained independantly. Thanks for Lanhsin's reminder. */
+/*  20100427 Joseph: Driver dynamic Tx power shall not affect Tx
+ *  power. It shall be determined by power training mechanism. */
+/*  Currently, we cannot fully disable driver dynamic tx power
+ *  mechanism because it is referenced by BT coexist mechanism. */
+/*  In the future, two mechanism shall be separated from each other
+ *  and maintained independantly. Thanks for Lanhsin's reminder. */
 		if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1) {
 			TxAGC[RF_PATH_A] = 0x10101010;
 			TxAGC[RF_PATH_B] = 0x10101010;
-		} else if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level2) {
+		} else if (pdmpriv->DynamicTxHighPowerLvl ==
+			   TxHighPwrLevel_Level2) {
 			TxAGC[RF_PATH_A] = 0x00000000;
 			TxAGC[RF_PATH_B] = 0x00000000;
 		} else {
 			for (idx1 = RF_PATH_A; idx1 <= RF_PATH_B; idx1++) {
-				TxAGC[idx1] =
-					pPowerlevel[idx1] | (pPowerlevel[idx1]<<8) |
-					(pPowerlevel[idx1]<<16) | (pPowerlevel[idx1]<<24);
+				TxAGC[idx1] = pPowerlevel[idx1] |
+					(pPowerlevel[idx1] << 8) |
+					(pPowerlevel[idx1] << 16) |
+					(pPowerlevel[idx1] << 24);
 			}
 
 			if (pHalData->EEPROMRegulatory == 0) {
@@ -178,29 +176,24 @@ void rtl823a_phy_rf6052setccktxpower(struct rtw_adapter *Adapter, u8 *pPowerleve
 	}
 
 	/*  rf-A cck tx power */
-	tmpval = TxAGC[RF_PATH_A]&0xff;
+	tmpval = TxAGC[RF_PATH_A] & 0xff;
 	PHY_SetBBReg(Adapter, rTxAGC_A_CCK1_Mcs32, bMaskByte1, tmpval);
-	tmpval = TxAGC[RF_PATH_A]>>8;
+	tmpval = TxAGC[RF_PATH_A] >> 8;
 	PHY_SetBBReg(Adapter, rTxAGC_B_CCK11_A_CCK2_11, 0xffffff00, tmpval);
 
 	/*  rf-B cck tx power */
-	tmpval = TxAGC[RF_PATH_B]>>24;
+	tmpval = TxAGC[RF_PATH_B] >> 24;
 	PHY_SetBBReg(Adapter, rTxAGC_B_CCK11_A_CCK2_11, bMaskByte0, tmpval);
-	tmpval = TxAGC[RF_PATH_B]&0x00ffffff;
+	tmpval = TxAGC[RF_PATH_B] & 0x00ffffff;
 	PHY_SetBBReg(Adapter, rTxAGC_B_CCK1_55_Mcs32, 0xffffff00, tmpval);
 }	/* PHY_RF6052SetCckTxPower */
 
 /*  powerbase0 for OFDM rates */
 /*  powerbase1 for HT MCS rates */
-static void getPowerBase(
-	struct rtw_adapter *Adapter,
-	u8 *pPowerLevel,
-	u8 Channel,
-	u32 *OfdmBase,
-	u32 *MCSBase
-	)
+static void getPowerBase(struct rtw_adapter *Adapter, u8 *pPowerLevel,
+			 u8 Channel, u32 *OfdmBase, u32 *MCSBase)
 {
-	struct hal_data_8723a	*pHalData = GET_HAL_DATA(Adapter);
+	struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
 	u32 powerBase0, powerBase1;
 	u8 Legacy_pwrdiff = 0;
 	s8 HT20_pwrdiff = 0;
@@ -211,8 +204,9 @@ static void getPowerBase(
 		Legacy_pwrdiff = pHalData->TxPwrLegacyHtDiff[i][Channel-1];
 		powerBase0 = powerlevel[i] + Legacy_pwrdiff;
 
-		powerBase0 = (powerBase0<<24) | (powerBase0<<16) | (powerBase0<<8) | powerBase0;
-		*(OfdmBase+i) = powerBase0;
+		powerBase0 = powerBase0 << 24 | powerBase0 << 16 |
+			powerBase0 << 8 | powerBase0;
+		*(OfdmBase + i) = powerBase0;
 	}
 
 	for (i = 0; i < 2; i++) {
@@ -222,36 +216,35 @@ static void getPowerBase(
 			powerlevel[i] += HT20_pwrdiff;
 		}
 		powerBase1 = powerlevel[i];
-		powerBase1 = (powerBase1<<24) | (powerBase1<<16) | (powerBase1<<8) | powerBase1;
-		*(MCSBase+i) = powerBase1;
+		powerBase1 = powerBase1 << 24 | powerBase1 << 16 |
+			powerBase1 << 8 | powerBase1;
+		*(MCSBase + i) = powerBase1;
 	}
 }
 
-static void getTxPowerWriteValByRegulatory(
-		struct rtw_adapter *Adapter,
-		u8 Channel,
-		u8 index,
-		u32 *powerBase0,
-		u32 *powerBase1,
-		u32 *pOutWriteVal
-	)
+static void
+getTxPowerWriteValByRegulatory(struct rtw_adapter *Adapter, u8 Channel,
+			       u8 index, u32 *powerBase0, u32 *powerBase1,
+			       u32 *pOutWriteVal)
 {
-	struct hal_data_8723a	*pHalData = GET_HAL_DATA(Adapter);
+	struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
 	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
-	u8	i, chnlGroup = 0, pwr_diff_limit[4];
-	u32	writeVal, customer_limit, rf;
+	u8 i, chnlGroup = 0, pwr_diff_limit[4];
+	u32 writeVal, customer_limit, rf;
 
 	/*  Index 0 & 1 = legacy OFDM, 2-5 = HT_MCS rate */
 	for (rf = 0; rf < 2; rf++) {
 		switch (pHalData->EEPROMRegulatory) {
 		case 0:	/*  Realtek better performance */
-			/*  increase power diff defined by Realtek for large power */
+			/*  increase power diff defined by Realtek for
+			 *  large power */
 			chnlGroup = 0;
 			writeVal = pHalData->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf?8:0)] +
 				((index < 2) ? powerBase0[rf] : powerBase1[rf]);
 			break;
 		case 1:	/*  Realtek regulatory */
-			/*  increase power diff defined by Realtek for regulatory */
+			/*  increase power diff defined by Realtek for
+			 *  regulatory */
 			if (pHalData->pwrGroupCnt == 1)
 				chnlGroup = 0;
 			if (pHalData->pwrGroupCnt >= 3) {
@@ -262,17 +255,20 @@ static void getTxPowerWriteValByRegulatory(
 				else if (Channel > 9)
 					chnlGroup = 2;
 
-				if (pHalData->CurrentChannelBW == HT_CHANNEL_WIDTH_20)
+				if (pHalData->CurrentChannelBW ==
+				    HT_CHANNEL_WIDTH_20)
 					chnlGroup++;
 				else
 					chnlGroup += 4;
 			}
 			writeVal = pHalData->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf?8:0)] +
-				   ((index < 2) ? powerBase0[rf] : powerBase1[rf]);
+				   ((index < 2) ? powerBase0[rf] :
+				    powerBase1[rf]);
 			break;
 		case 2:	/*  Better regulatory */
-				/*  don't increase any power diff */
-			writeVal = ((index < 2) ? powerBase0[rf] : powerBase1[rf]);
+			/*  don't increase any power diff */
+			writeVal = ((index < 2) ? powerBase0[rf] :
+				    powerBase1[rf]);
 			break;
 		case 3:	/*  Customer defined power diff. */
 			chnlGroup = 0;
@@ -299,28 +295,34 @@ static void getTxPowerWriteValByRegulatory(
 			break;
 		}
 
-/*  20100427 Joseph: Driver dynamic Tx power shall not affect Tx power. It shall be determined by power training mechanism. */
-/*  Currently, we cannot fully disable driver dynamic tx power mechanism because it is referenced by BT coexist mechanism. */
-/*  In the future, two mechanism shall be separated from each other and maintained independantly. Thanks for Lanhsin's reminder. */
+/*  20100427 Joseph: Driver dynamic Tx power shall not affect Tx power.
+    It shall be determined by power training mechanism. */
+/*  Currently, we cannot fully disable driver dynamic tx power mechanism
+    because it is referenced by BT coexist mechanism. */
+/*  In the future, two mechanism shall be separated from each other and
+    maintained independantly. Thanks for Lanhsin's reminder. */
 
 		if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1)
 			writeVal = 0x14141414;
-		else if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level2)
+		else if (pdmpriv->DynamicTxHighPowerLvl ==
+			 TxHighPwrLevel_Level2)
 			writeVal = 0x00000000;
 
-		/*  20100628 Joseph: High power mode for BT-Coexist mechanism. */
-		/*  This mechanism is only applied when Driver-Highpower-Mechanism is OFF. */
+		/* 20100628 Joseph: High power mode for BT-Coexist mechanism. */
+		/* This mechanism is only applied when
+		   Driver-Highpower-Mechanism is OFF. */
 		if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_BT1)
 			writeVal = writeVal - 0x06060606;
 		else if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_BT2)
 			writeVal = writeVal;
-		*(pOutWriteVal+rf) = writeVal;
+		*(pOutWriteVal + rf) = writeVal;
 	}
 }
 
-static void writeOFDMPowerReg(struct rtw_adapter *Adapter, u8 index, u32 *pValue)
+static void writeOFDMPowerReg(struct rtw_adapter *Adapter, u8 index,
+			      u32 *pValue)
 {
-	struct hal_data_8723a	*pHalData = GET_HAL_DATA(Adapter);
+	struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
 	u16 RegOffset_A[6] = {
 		rTxAGC_A_Rate18_06, rTxAGC_A_Rate54_24,
 		rTxAGC_A_Mcs03_Mcs00, rTxAGC_A_Mcs07_Mcs04,
@@ -338,12 +340,13 @@ static void writeOFDMPowerReg(struct rtw_adapter *Adapter, u8 index, u32 *pValue
 	for (rf = 0; rf < 2; rf++) {
 		writeVal = pValue[rf];
 		for (i = 0; i < 4; i++) {
-			pwr_val[i] = (u8)((writeVal & (0x7f<<(i*8)))>>(i*8));
-			if (pwr_val[i]  > RF6052_MAX_TX_PWR)
+			pwr_val[i] = (u8)((writeVal &
+					   (0x7f << (i * 8))) >> (i * 8));
+			if (pwr_val[i] > RF6052_MAX_TX_PWR)
 				pwr_val[i]  = RF6052_MAX_TX_PWR;
 		}
-		writeVal = (pwr_val[3]<<24) | (pwr_val[2]<<16) |
-			   (pwr_val[1]<<8) | pwr_val[0];
+		writeVal = pwr_val[3] << 24 | pwr_val[2] << 16 |
+			pwr_val[1] << 8 | pwr_val[0];
 
 		if (rf == 0)
 			RegOffset = RegOffset_A[index];
@@ -352,7 +355,8 @@ static void writeOFDMPowerReg(struct rtw_adapter *Adapter, u8 index, u32 *pValue
 
 		PHY_SetBBReg(Adapter, RegOffset, bMaskDWord, writeVal);
 
-		/*  201005115 Joseph: Set Tx Power diff for Tx power training mechanism. */
+		/*  201005115 Joseph: Set Tx Power diff for Tx power
+		    training mechanism. */
 		if (((pHalData->rf_type == RF_2T2R) &&
 		    (RegOffset == rTxAGC_A_Mcs15_Mcs12 ||
 		     RegOffset == rTxAGC_B_Mcs15_Mcs12)) ||
@@ -360,15 +364,19 @@ static void writeOFDMPowerReg(struct rtw_adapter *Adapter, u8 index, u32 *pValue
 		     (RegOffset == rTxAGC_A_Mcs07_Mcs04 ||
 		      RegOffset == rTxAGC_B_Mcs07_Mcs04))) {
 			writeVal = pwr_val[3];
-			if (RegOffset == rTxAGC_A_Mcs15_Mcs12 || RegOffset == rTxAGC_A_Mcs07_Mcs04)
+			if (RegOffset == rTxAGC_A_Mcs15_Mcs12 ||
+			    RegOffset == rTxAGC_A_Mcs07_Mcs04)
 				RegOffset = 0xc90;
-			if (RegOffset == rTxAGC_B_Mcs15_Mcs12 || RegOffset == rTxAGC_B_Mcs07_Mcs04)
+			if (RegOffset == rTxAGC_B_Mcs15_Mcs12 ||
+			    RegOffset == rTxAGC_B_Mcs07_Mcs04)
 				RegOffset = 0xc98;
 			for (i = 0; i < 3; i++) {
 				if (i != 2)
-					writeVal = (writeVal > 8) ? (writeVal-8) : 0;
+					writeVal = (writeVal > 8) ?
+						(writeVal - 8) : 0;
 				else
-					writeVal = (writeVal > 6) ? (writeVal-6) : 0;
+					writeVal = (writeVal > 6) ?
+						(writeVal - 6) : 0;
 				rtl8723au_write8(Adapter, RegOffset + i,
 						 (u8)writeVal);
 			}
@@ -379,8 +387,9 @@ static void writeOFDMPowerReg(struct rtw_adapter *Adapter, u8 index, u32 *pValue
  * Function:	PHY_RF6052SetOFDMTxPower
  *
  * Overview:	For legacy and HY OFDM, we must read EEPROM TX power index for
- *			different channel and read original value in TX power register area from
- *			0xe00. We increase offset and original value to be correct tx pwr.
+ *		different channel and read original value in TX power
+ *		register area from 0xe00. We increase offset and
+ *		original value to be correct tx pwr.
  *
  * Input:       NONE
  *
@@ -389,20 +398,23 @@ static void writeOFDMPowerReg(struct rtw_adapter *Adapter, u8 index, u32 *pValue
  * Return:      NONE
  *
  * Revised History:
- * When			Who		Remark
- * 11/05/2008	MHC		Simulate 8192 series method.
- * 01/06/2009	MHC		1. Prevent Path B tx power overflow or underflow dure to
- *						A/B pwr difference or legacy/HT pwr diff.
- *						2. We concern with path B legacy/HT OFDM difference.
- * 01/22/2009	MHC		Support new EPRO format from SD3.
+ * When			Remark
+ * 11/05/2008	MHC	Simulate 8192 series method.
+ * 01/06/2009	MHC	1. Prevent Path B tx power overflow or
+ *			underflow dure to A/B pwr difference or
+ *			legacy/HT pwr diff.
+ *			2. We concern with path B legacy/HT OFDM difference.
+ * 01/22/2009	MHC	Support new EPRO format from SD3.
  *
  *---------------------------------------------------------------------------*/
-void rtl8723a_PHY_RF6052SetOFDMTxPower(struct rtw_adapter *Adapter, u8 *pPowerLevel, u8 Channel)
+void rtl8723a_PHY_RF6052SetOFDMTxPower(struct rtw_adapter *Adapter,
+				       u8 *pPowerLevel, u8 Channel)
 {
 	u32 writeVal[2], powerBase0[2], powerBase1[2];
 	u8 index = 0;
 
-	getPowerBase(Adapter, pPowerLevel, Channel, &powerBase0[0], &powerBase1[0]);
+	getPowerBase(Adapter, pPowerLevel, Channel,
+		     &powerBase0[0], &powerBase1[0]);
 
 	for (index = 0; index < 6; index++) {
 		getTxPowerWriteValByRegulatory(Adapter, Channel, index,
@@ -416,7 +428,7 @@ static int phy_RF6052_Config_ParaFile(struct rtw_adapter *Adapter)
 {
 	u32 u4RegValue = 0;
 	u8 eRFPath;
-	struct bb_reg_define	*pPhyReg;
+	struct bb_reg_define *pPhyReg;
 	int rtStatus = _SUCCESS;
 	struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
 
@@ -430,15 +442,17 @@ static int phy_RF6052_Config_ParaFile(struct rtw_adapter *Adapter)
 		/*----Store original RFENV control type----*/
 		switch (eRFPath) {
 		case RF_PATH_A:
-			u4RegValue = PHY_QueryBBReg(Adapter, pPhyReg->rfintfs, bRFSI_RFENV);
+			u4RegValue = PHY_QueryBBReg(Adapter, pPhyReg->rfintfs,
+						    bRFSI_RFENV);
 			break;
 		case RF_PATH_B:
-			u4RegValue = PHY_QueryBBReg(Adapter, pPhyReg->rfintfs, bRFSI_RFENV<<16);
+			u4RegValue = PHY_QueryBBReg(Adapter, pPhyReg->rfintfs,
+						    bRFSI_RFENV << 16);
 			break;
 		}
 
 		/*----Set RF_ENV enable----*/
-		PHY_SetBBReg(Adapter, pPhyReg->rfintfe, bRFSI_RFENV<<16, 0x1);
+		PHY_SetBBReg(Adapter, pPhyReg->rfintfe, bRFSI_RFENV << 16, 0x1);
 		udelay(1);/* PlatformStallExecution(1); */
 
 		/*----Set RF_ENV output high----*/
@@ -446,10 +460,12 @@ static int phy_RF6052_Config_ParaFile(struct rtw_adapter *Adapter)
 		udelay(1);/* PlatformStallExecution(1); */
 
 		/* Set bit number of Address and Data for RF register */
-		PHY_SetBBReg(Adapter, pPhyReg->rfHSSIPara2, b3WireAddressLength, 0x0);	/*  Set 1 to 4 bits for 8255 */
+		PHY_SetBBReg(Adapter, pPhyReg->rfHSSIPara2, b3WireAddressLength,
+			     0x0);	/*  Set 1 to 4 bits for 8255 */
 		udelay(1);/* PlatformStallExecution(1); */
 
-		PHY_SetBBReg(Adapter, pPhyReg->rfHSSIPara2, b3WireDataLength, 0x0);	/*  Set 0 to 12  bits for 8255 */
+		PHY_SetBBReg(Adapter, pPhyReg->rfHSSIPara2, b3WireDataLength,
+			     0x0);	/*  Set 0 to 12  bits for 8255 */
 		udelay(1);/* PlatformStallExecution(1); */
 
 		/*----Initialize RF fom connfiguration file----*/
@@ -464,15 +480,16 @@ static int phy_RF6052_Config_ParaFile(struct rtw_adapter *Adapter)
 		/*----Restore RFENV control type----*/;
 		switch (eRFPath) {
 		case RF_PATH_A:
-			PHY_SetBBReg(Adapter, pPhyReg->rfintfs, bRFSI_RFENV, u4RegValue);
+			PHY_SetBBReg(Adapter, pPhyReg->rfintfs,
+				     bRFSI_RFENV, u4RegValue);
 			break;
 		case RF_PATH_B:
-			PHY_SetBBReg(Adapter, pPhyReg->rfintfs, bRFSI_RFENV<<16, u4RegValue);
+			PHY_SetBBReg(Adapter, pPhyReg->rfintfs,
+				     bRFSI_RFENV << 16, u4RegValue);
 			break;
 		}
 
 		if (rtStatus != _SUCCESS) {
-			/* RT_TRACE(COMP_FPGA, DBG_LOUD, ("phy_RF6052_Config_ParaFile():Radio[%d] Fail!!", eRFPath)); */
 			goto phy_RF6052_Config_ParaFile_Fail;
 		}
 	}