diff options
author | Jonathan Marek <jonathan@marek.ca> | 2020-05-23 22:14:14 -0400 |
---|---|---|
committer | Vinod Koul <vkoul@kernel.org> | 2020-06-29 15:11:33 +0530 |
commit | 7b675ba1d27854abde20c52c47f0957756e04304 (patch) | |
tree | ccba8d327c571d8c09cbef3b5689d83672ab4548 /drivers/phy | |
parent | 5dcbc71126e1dc41e32810af3f24b4a318eba5b3 (diff) |
phy: qcom-qmp: Add QMP V4 USB3 UNIPHY
Add support for the USB3 PHY used by the secondary usb controller on sm8150
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200524021416.17049-3-jonathan@marek.ca
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Diffstat (limited to 'drivers/phy')
-rw-r--r-- | drivers/phy/qualcomm/phy-qcom-qmp.c | 150 | ||||
-rw-r--r-- | drivers/phy/qualcomm/phy-qcom-qmp.h | 5 |
2 files changed, 155 insertions, 0 deletions
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index 058650b0f018..753997db0317 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -199,6 +199,17 @@ static const unsigned int qmp_v4_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = { [QPHY_START_CTRL] = 0x44, [QPHY_PCS_STATUS] = 0x14, [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40, + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x308, + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x314, +}; + +static const unsigned int qmp_v4_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = { + [QPHY_SW_RESET] = 0x00, + [QPHY_START_CTRL] = 0x44, + [QPHY_PCS_STATUS] = 0x14, + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40, + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x608, + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x614, }; static const unsigned int sdm845_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = { @@ -1488,6 +1499,114 @@ static const struct qmp_phy_init_tbl sm8150_usb3_pcs_tbl[] = { QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07), }; +static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_serdes_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x1a), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0xab), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0xea), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x34), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0x24), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x82), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xea), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x82), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x34), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xca), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_IPTRIM, 0x20), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0xde), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02), +}; + +static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_tx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x95), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x40), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x05), +}; + +static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_rx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0xb8), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x37), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x2f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xef), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb3), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x0b), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x20), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c), +}; + +static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_pcs_tbl[] = { + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0f), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c), +}; + /* struct qmp_phy_cfg - per-PHY initialization config */ struct qmp_phy_cfg { /* phy-type - PCIE/UFS/USB */ @@ -2099,6 +2218,34 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = { .is_dual_lane_phy = true, }; +static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = { + .type = PHY_TYPE_USB3, + .nlanes = 1, + + .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl), + .tx_tbl = sm8150_usb3_uniphy_tx_tbl, + .tx_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_tx_tbl), + .rx_tbl = sm8150_usb3_uniphy_rx_tbl, + .rx_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_rx_tbl), + .pcs_tbl = sm8150_usb3_uniphy_pcs_tbl, + .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_pcs_tbl), + .clk_list = qmp_v4_phy_clk_l, + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l), + .reset_list = msm8996_usb3phy_reset_l, + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), + .regs = qmp_v4_usb3_uniphy_regs_layout, + + .start_ctrl = SERDES_START | PCS_START, + .pwrdn_ctrl = SW_PWRDN, + + .has_pwrdn_delay = true, + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN, + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, +}; + static void qcom_qmp_phy_configure_lane(void __iomem *base, const unsigned int *regs, const struct qmp_phy_init_tbl tbl[], @@ -2876,6 +3023,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = { }, { .compatible = "qcom,sm8150-qmp-usb3-phy", .data = &sm8150_usb3phy_cfg, + }, { + .compatible = "qcom,sm8150-qmp-usb3-uni-phy", + .data = &sm8150_usb3_uniphy_cfg, }, { }, }; diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h index 6d017a0c0c8d..f39f7a968228 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h @@ -363,6 +363,7 @@ /* Only for QMP V4 PHY - TX registers */ #define QSERDES_V4_TX_RES_CODE_LANE_TX 0x34 #define QSERDES_V4_TX_RES_CODE_LANE_RX 0x38 +#define QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX 0x3c #define QSERDES_V4_TX_LANE_MODE_1 0x84 #define QSERDES_V4_TX_RCV_DETECT_LVL_2 0x9c #define QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1 0xd8 @@ -709,6 +710,10 @@ #define QPHY_V4_PCS_USB3_SIGDET_STARTUP_TIMER_VAL 0x354 #define QPHY_V4_PCS_USB3_TEST_CONTROL 0x358 +/* Only for QMP V4 PHY - UNI has 0x300 offset for PCS_USB3 regs */ +#define QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL 0x618 +#define QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2 0x638 + /* Only for QMP V4 PHY - PCS_MISC registers */ #define QPHY_V4_PCS_MISC_TYPEC_CTRL 0x00 #define QPHY_V4_PCS_MISC_TYPEC_PWRDN_CTRL 0x04 |