diff options
author | Florian Fainelli <f.fainelli@gmail.com> | 2014-08-27 17:04:56 -0700 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2014-08-27 22:59:40 -0700 |
commit | 246d7f773c13cac3e3ab1609fd4ffee520242c63 (patch) | |
tree | 4c29061faa719384ca97859a168b0c3d8d346948 /drivers/net/dsa | |
parent | 5037d532b83d7325a2743dffe82882a64697a8e8 (diff) |
net: dsa: add Broadcom SF2 switch driver
Add support for the Broadcom Starfigther 2 switch chip using a DSA
driver. This switch driver supports the following features:
- configuration of the external switch port interface: MII, RevMII,
RGMII and RGMII_NO_ID are supported
- support for the per-port MIB counters
- support for link interrupts for special ports (e.g: MoCA)
- powering up/down of switch memories to conserve power when ports are
unused
Finally, update the compatible property for the DSA core code to match
our switch top-level compatible node.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/dsa')
-rw-r--r-- | drivers/net/dsa/Kconfig | 11 | ||||
-rw-r--r-- | drivers/net/dsa/Makefile | 1 | ||||
-rw-r--r-- | drivers/net/dsa/bcm_sf2.c | 626 | ||||
-rw-r--r-- | drivers/net/dsa/bcm_sf2.h | 140 | ||||
-rw-r--r-- | drivers/net/dsa/bcm_sf2_regs.h | 227 |
5 files changed, 1005 insertions, 0 deletions
diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig index b8fe808b7957..c6ee07c6a1b5 100644 --- a/drivers/net/dsa/Kconfig +++ b/drivers/net/dsa/Kconfig @@ -36,4 +36,15 @@ config NET_DSA_MV88E6123_61_65 This enables support for the Marvell 88E6123/6161/6165 ethernet switch chips. +config NET_DSA_BCM_SF2 + tristate "Broadcom Starfighter 2 Ethernet switch support" + select NET_DSA + select NET_DSA_TAG_BRCM + select FIXED_PHY if NET_DSA_BCM_SF2=y + select BCM7XXX_PHY + select MDIO_BCM_UNIMAC + ---help--- + This enables support for the Broadcom Starfighter 2 Ethernet + switch chips. + endmenu diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile index f3bda05536cc..dd3cd3b8157f 100644 --- a/drivers/net/dsa/Makefile +++ b/drivers/net/dsa/Makefile @@ -7,3 +7,4 @@ endif ifdef CONFIG_NET_DSA_MV88E6131 mv88e6xxx_drv-y += mv88e6131.o endif +obj-$(CONFIG_NET_DSA_BCM_SF2) += bcm_sf2.o diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c new file mode 100644 index 000000000000..bb7cb8e283b1 --- /dev/null +++ b/drivers/net/dsa/bcm_sf2.c @@ -0,0 +1,626 @@ +/* + * Broadcom Starfighter 2 DSA switch driver + * + * Copyright (C) 2014, Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/list.h> +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/phy.h> +#include <linux/phy_fixed.h> +#include <linux/mii.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_address.h> +#include <net/dsa.h> + +#include "bcm_sf2.h" +#include "bcm_sf2_regs.h" + +/* String, offset, and register size in bytes if different from 4 bytes */ +static const struct bcm_sf2_hw_stats bcm_sf2_mib[] = { + { "TxOctets", 0x000, 8 }, + { "TxDropPkts", 0x020 }, + { "TxQPKTQ0", 0x030 }, + { "TxBroadcastPkts", 0x040 }, + { "TxMulticastPkts", 0x050 }, + { "TxUnicastPKts", 0x060 }, + { "TxCollisions", 0x070 }, + { "TxSingleCollision", 0x080 }, + { "TxMultipleCollision", 0x090 }, + { "TxDeferredCollision", 0x0a0 }, + { "TxLateCollision", 0x0b0 }, + { "TxExcessiveCollision", 0x0c0 }, + { "TxFrameInDisc", 0x0d0 }, + { "TxPausePkts", 0x0e0 }, + { "TxQPKTQ1", 0x0f0 }, + { "TxQPKTQ2", 0x100 }, + { "TxQPKTQ3", 0x110 }, + { "TxQPKTQ4", 0x120 }, + { "TxQPKTQ5", 0x130 }, + { "RxOctets", 0x140, 8 }, + { "RxUndersizePkts", 0x160 }, + { "RxPausePkts", 0x170 }, + { "RxPkts64Octets", 0x180 }, + { "RxPkts65to127Octets", 0x190 }, + { "RxPkts128to255Octets", 0x1a0 }, + { "RxPkts256to511Octets", 0x1b0 }, + { "RxPkts512to1023Octets", 0x1c0 }, + { "RxPkts1024toMaxPktsOctets", 0x1d0 }, + { "RxOversizePkts", 0x1e0 }, + { "RxJabbers", 0x1f0 }, + { "RxAlignmentErrors", 0x200 }, + { "RxFCSErrors", 0x210 }, + { "RxGoodOctets", 0x220, 8 }, + { "RxDropPkts", 0x240 }, + { "RxUnicastPkts", 0x250 }, + { "RxMulticastPkts", 0x260 }, + { "RxBroadcastPkts", 0x270 }, + { "RxSAChanges", 0x280 }, + { "RxFragments", 0x290 }, + { "RxJumboPkt", 0x2a0 }, + { "RxSymblErr", 0x2b0 }, + { "InRangeErrCount", 0x2c0 }, + { "OutRangeErrCount", 0x2d0 }, + { "EEELpiEvent", 0x2e0 }, + { "EEELpiDuration", 0x2f0 }, + { "RxDiscard", 0x300, 8 }, + { "TxQPKTQ6", 0x320 }, + { "TxQPKTQ7", 0x330 }, + { "TxPkts64Octets", 0x340 }, + { "TxPkts65to127Octets", 0x350 }, + { "TxPkts128to255Octets", 0x360 }, + { "TxPkts256to511Ocets", 0x370 }, + { "TxPkts512to1023Ocets", 0x380 }, + { "TxPkts1024toMaxPktOcets", 0x390 }, +}; + +#define BCM_SF2_STATS_SIZE ARRAY_SIZE(bcm_sf2_mib) + +static void bcm_sf2_sw_get_strings(struct dsa_switch *ds, + int port, uint8_t *data) +{ + unsigned int i; + + for (i = 0; i < BCM_SF2_STATS_SIZE; i++) + memcpy(data + i * ETH_GSTRING_LEN, + bcm_sf2_mib[i].string, ETH_GSTRING_LEN); +} + +static void bcm_sf2_sw_get_ethtool_stats(struct dsa_switch *ds, + int port, uint64_t *data) +{ + struct bcm_sf2_priv *priv = ds_to_priv(ds); + const struct bcm_sf2_hw_stats *s; + unsigned int i; + u64 val = 0; + u32 offset; + + mutex_lock(&priv->stats_mutex); + + /* Now fetch the per-port counters */ + for (i = 0; i < BCM_SF2_STATS_SIZE; i++) { + s = &bcm_sf2_mib[i]; + + /* Do a latched 64-bit read if needed */ + offset = s->reg + CORE_P_MIB_OFFSET(port); + if (s->sizeof_stat == 8) + val = core_readq(priv, offset); + else + val = core_readl(priv, offset); + + data[i] = (u64)val; + } + + mutex_unlock(&priv->stats_mutex); +} + +static int bcm_sf2_sw_get_sset_count(struct dsa_switch *ds) +{ + return BCM_SF2_STATS_SIZE; +} + +static char *bcm_sf2_sw_probe(struct mii_bus *bus, int sw_addr) +{ + return "Broadcom Starfighter 2"; +} + +static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port) +{ + struct bcm_sf2_priv *priv = ds_to_priv(ds); + unsigned int i; + u32 reg, val; + + /* Enable the port memories */ + reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL); + reg &= ~P_TXQ_PSM_VDD(port); + core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL); + + /* Enable Broadcast, Multicast, Unicast forwarding to IMP port */ + reg = core_readl(priv, CORE_IMP_CTL); + reg |= (RX_BCST_EN | RX_MCST_EN | RX_UCST_EN); + reg &= ~(RX_DIS | TX_DIS); + core_writel(priv, reg, CORE_IMP_CTL); + + /* Enable forwarding */ + core_writel(priv, SW_FWDG_EN, CORE_SWMODE); + + /* Enable IMP port in dumb mode */ + reg = core_readl(priv, CORE_SWITCH_CTRL); + reg |= MII_DUMB_FWDG_EN; + core_writel(priv, reg, CORE_SWITCH_CTRL); + + /* Resolve which bit controls the Broadcom tag */ + switch (port) { + case 8: + val = BRCM_HDR_EN_P8; + break; + case 7: + val = BRCM_HDR_EN_P7; + break; + case 5: + val = BRCM_HDR_EN_P5; + break; + default: + val = 0; + break; + } + + /* Enable Broadcom tags for IMP port */ + reg = core_readl(priv, CORE_BRCM_HDR_CTRL); + reg |= val; + core_writel(priv, reg, CORE_BRCM_HDR_CTRL); + + /* Enable reception Broadcom tag for CPU TX (switch RX) to + * allow us to tag outgoing frames + */ + reg = core_readl(priv, CORE_BRCM_HDR_RX_DIS); + reg &= ~(1 << port); + core_writel(priv, reg, CORE_BRCM_HDR_RX_DIS); + + /* Enable transmission of Broadcom tags from the switch (CPU RX) to + * allow delivering frames to the per-port net_devices + */ + reg = core_readl(priv, CORE_BRCM_HDR_TX_DIS); + reg &= ~(1 << port); + core_writel(priv, reg, CORE_BRCM_HDR_TX_DIS); + + /* Force link status for IMP port */ + reg = core_readl(priv, CORE_STS_OVERRIDE_IMP); + reg |= (MII_SW_OR | LINK_STS); + core_writel(priv, reg, CORE_STS_OVERRIDE_IMP); + + /* Enable the IMP Port to be in the same VLAN as the other ports + * on a per-port basis such that we only have Port i and IMP in + * the same VLAN. + */ + for (i = 0; i < priv->hw_params.num_ports; i++) { + if (!((1 << i) & ds->phys_port_mask)) + continue; + + reg = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(i)); + reg |= (1 << port); + core_writel(priv, reg, CORE_PORT_VLAN_CTL_PORT(i)); + } +} + +static void bcm_sf2_port_setup(struct dsa_switch *ds, int port) +{ + struct bcm_sf2_priv *priv = ds_to_priv(ds); + u32 reg; + + /* Clear the memory power down */ + reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL); + reg &= ~P_TXQ_PSM_VDD(port); + core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL); + + /* Clear the Rx and Tx disable bits and set to no spanning tree */ + core_writel(priv, 0, CORE_G_PCTL_PORT(port)); + + /* Enable port 7 interrupts to get notified */ + if (port == 7) + intrl2_1_mask_clear(priv, P_IRQ_MASK(P7_IRQ_OFF)); + + /* Set this port, and only this one to be in the default VLAN */ + reg = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(port)); + reg &= ~PORT_VLAN_CTRL_MASK; + reg |= (1 << port); + core_writel(priv, reg, CORE_PORT_VLAN_CTL_PORT(port)); +} + +static void bcm_sf2_port_disable(struct dsa_switch *ds, int port) +{ + struct bcm_sf2_priv *priv = ds_to_priv(ds); + u32 off, reg; + + if (dsa_is_cpu_port(ds, port)) + off = CORE_IMP_CTL; + else + off = CORE_G_PCTL_PORT(port); + + reg = core_readl(priv, off); + reg |= RX_DIS | TX_DIS; + core_writel(priv, reg, off); + + /* Power down the port memory */ + reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL); + reg |= P_TXQ_PSM_VDD(port); + core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL); +} + +static irqreturn_t bcm_sf2_switch_0_isr(int irq, void *dev_id) +{ + struct bcm_sf2_priv *priv = dev_id; + + priv->irq0_stat = intrl2_0_readl(priv, INTRL2_CPU_STATUS) & + ~priv->irq0_mask; + intrl2_0_writel(priv, priv->irq0_stat, INTRL2_CPU_CLEAR); + + return IRQ_HANDLED; +} + +static irqreturn_t bcm_sf2_switch_1_isr(int irq, void *dev_id) +{ + struct bcm_sf2_priv *priv = dev_id; + + priv->irq1_stat = intrl2_1_readl(priv, INTRL2_CPU_STATUS) & + ~priv->irq1_mask; + intrl2_1_writel(priv, priv->irq1_stat, INTRL2_CPU_CLEAR); + + if (priv->irq1_stat & P_LINK_UP_IRQ(P7_IRQ_OFF)) + priv->port_sts[7].link = 1; + if (priv->irq1_stat & P_LINK_DOWN_IRQ(P7_IRQ_OFF)) + priv->port_sts[7].link = 0; + + return IRQ_HANDLED; +} + +static int bcm_sf2_sw_setup(struct dsa_switch *ds) +{ + const char *reg_names[BCM_SF2_REGS_NUM] = BCM_SF2_REGS_NAME; + struct bcm_sf2_priv *priv = ds_to_priv(ds); + struct device_node *dn; + void __iomem **base; + unsigned int port; + unsigned int i; + u32 reg, rev; + int ret; + + spin_lock_init(&priv->indir_lock); + mutex_init(&priv->stats_mutex); + + /* All the interesting properties are at the parent device_node + * level + */ + dn = ds->pd->of_node->parent; + + priv->irq0 = irq_of_parse_and_map(dn, 0); + priv->irq1 = irq_of_parse_and_map(dn, 1); + + base = &priv->core; + for (i = 0; i < BCM_SF2_REGS_NUM; i++) { + *base = of_iomap(dn, i); + if (*base == NULL) { + pr_err("unable to find register: %s\n", reg_names[i]); + return -ENODEV; + } + base++; + } + + /* Disable all interrupts and request them */ + intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET); + intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR); + intrl2_0_writel(priv, 0, INTRL2_CPU_MASK_CLEAR); + intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET); + intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR); + intrl2_1_writel(priv, 0, INTRL2_CPU_MASK_CLEAR); + + ret = request_irq(priv->irq0, bcm_sf2_switch_0_isr, 0, + "switch_0", priv); + if (ret < 0) { + pr_err("failed to request switch_0 IRQ\n"); + goto out_unmap; + } + + ret = request_irq(priv->irq1, bcm_sf2_switch_1_isr, 0, + "switch_1", priv); + if (ret < 0) { + pr_err("failed to request switch_1 IRQ\n"); + goto out_free_irq0; + } + + /* Reset the MIB counters */ + reg = core_readl(priv, CORE_GMNCFGCFG); + reg |= RST_MIB_CNT; + core_writel(priv, reg, CORE_GMNCFGCFG); + reg &= ~RST_MIB_CNT; + core_writel(priv, reg, CORE_GMNCFGCFG); + + /* Get the maximum number of ports for this switch */ + priv->hw_params.num_ports = core_readl(priv, CORE_IMP0_PRT_ID) + 1; + if (priv->hw_params.num_ports > DSA_MAX_PORTS) + priv->hw_params.num_ports = DSA_MAX_PORTS; + + /* Assume a single GPHY setup if we can't read that property */ + if (of_property_read_u32(dn, "brcm,num-gphy", + &priv->hw_params.num_gphy)) + priv->hw_params.num_gphy = 1; + + /* Enable all valid ports and disable those unused */ + for (port = 0; port < priv->hw_params.num_ports; port++) { + /* IMP port receives special treatment */ + if ((1 << port) & ds->phys_port_mask) + bcm_sf2_port_setup(ds, port); + else if (dsa_is_cpu_port(ds, port)) + bcm_sf2_imp_setup(ds, port); + else + bcm_sf2_port_disable(ds, port); + } + + /* Include the pseudo-PHY address and the broadcast PHY address to + * divert reads towards our workaround + */ + ds->phys_mii_mask |= ((1 << 30) | (1 << 0)); + + rev = reg_readl(priv, REG_SWITCH_REVISION); + priv->hw_params.top_rev = (rev >> SWITCH_TOP_REV_SHIFT) & + SWITCH_TOP_REV_MASK; + priv->hw_params.core_rev = (rev & SF2_REV_MASK); + + pr_info("Starfighter 2 top: %x.%02x, core: %x.%02x base: 0x%p, IRQs: %d, %d\n", + priv->hw_params.top_rev >> 8, priv->hw_params.top_rev & 0xff, + priv->hw_params.core_rev >> 8, priv->hw_params.core_rev & 0xff, + priv->core, priv->irq0, priv->irq1); + + return 0; + +out_free_irq0: + free_irq(priv->irq0, priv); +out_unmap: + base = &priv->core; + for (i = 0; i < BCM_SF2_REGS_NUM; i++) { + iounmap(*base); + base++; + } + return ret; +} + +static int bcm_sf2_sw_set_addr(struct dsa_switch *ds, u8 *addr) +{ + return 0; +} + +static int bcm_sf2_sw_indir_rw(struct dsa_switch *ds, int op, int addr, + int regnum, u16 val) +{ + struct bcm_sf2_priv *priv = ds_to_priv(ds); + int ret = 0; + u32 reg; + + reg = reg_readl(priv, REG_SWITCH_CNTRL); + reg |= MDIO_MASTER_SEL; + reg_writel(priv, reg, REG_SWITCH_CNTRL); + + /* Page << 8 | offset */ + reg = 0x70; + reg <<= 2; + core_writel(priv, addr, reg); + + /* Page << 8 | offset */ + reg = 0x80 << 8 | regnum << 1; + reg <<= 2; + + if (op) + ret = core_readl(priv, reg); + else + core_writel(priv, val, reg); + + reg = reg_readl(priv, REG_SWITCH_CNTRL); + reg &= ~MDIO_MASTER_SEL; + reg_writel(priv, reg, REG_SWITCH_CNTRL); + + return ret & 0xffff; +} + +static int bcm_sf2_sw_phy_read(struct dsa_switch *ds, int addr, int regnum) +{ + /* Intercept reads from the MDIO broadcast address or Broadcom + * pseudo-PHY address + */ + switch (addr) { + case 0: + case 30: + return bcm_sf2_sw_indir_rw(ds, 1, addr, regnum, 0); + default: + return 0xffff; + } +} + +static int bcm_sf2_sw_phy_write(struct dsa_switch *ds, int addr, int regnum, + u16 val) +{ + /* Intercept writes to the MDIO broadcast address or Broadcom + * pseudo-PHY address + */ + switch (addr) { + case 0: + case 30: + bcm_sf2_sw_indir_rw(ds, 0, addr, regnum, val); + break; + } + + return 0; +} + +static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port, + struct phy_device *phydev) +{ + struct bcm_sf2_priv *priv = ds_to_priv(ds); + u32 id_mode_dis = 0, port_mode; + const char *str = NULL; + u32 reg; + + switch (phydev->interface) { + case PHY_INTERFACE_MODE_RGMII: + str = "RGMII (no delay)"; + id_mode_dis = 1; + case PHY_INTERFACE_MODE_RGMII_TXID: + if (!str) + str = "RGMII (TX delay)"; + port_mode = EXT_GPHY; + break; + case PHY_INTERFACE_MODE_MII: + str = "MII"; + port_mode = EXT_EPHY; + break; + case PHY_INTERFACE_MODE_REVMII: + str = "Reverse MII"; + port_mode = EXT_REVMII; + break; + default: + goto force_link; + } + + /* Clear id_mode_dis bit, and the existing port mode, but + * make sure we enable the RGMII block for data to pass + */ + reg = reg_readl(priv, REG_RGMII_CNTRL_P(port)); + reg &= ~ID_MODE_DIS; + reg &= ~(PORT_MODE_MASK << PORT_MODE_SHIFT); + reg &= ~(RX_PAUSE_EN | TX_PAUSE_EN); + + reg |= port_mode | RGMII_MODE_EN; + if (id_mode_dis) + reg |= ID_MODE_DIS; + + if (phydev->pause) { + if (phydev->asym_pause) + reg |= TX_PAUSE_EN; + reg |= RX_PAUSE_EN; + } + + reg_writel(priv, reg, REG_RGMII_CNTRL_P(port)); + + pr_info("Port %d configured for %s\n", port, str); + +force_link: + /* Force link settings detected from the PHY */ + reg = SW_OVERRIDE; + switch (phydev->speed) { + case SPEED_1000: + reg |= SPDSTS_1000 << SPEED_SHIFT; + break; + case SPEED_100: + reg |= SPDSTS_100 << SPEED_SHIFT; + break; + } + + if (phydev->link) + reg |= LINK_STS; + if (phydev->duplex == DUPLEX_FULL) + reg |= DUPLX_MODE; + + core_writel(priv, reg, CORE_STS_OVERRIDE_GMIIP_PORT(port)); +} + +static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port, + struct fixed_phy_status *status) +{ + struct bcm_sf2_priv *priv = ds_to_priv(ds); + u32 link, duplex, pause, speed; + u32 reg; + + link = core_readl(priv, CORE_LNKSTS); + duplex = core_readl(priv, CORE_DUPSTS); + pause = core_readl(priv, CORE_PAUSESTS); + speed = core_readl(priv, CORE_SPDSTS); + + speed >>= (port * SPDSTS_SHIFT); + speed &= SPDSTS_MASK; + + status->link = 0; + + /* Port 7 is special as we do not get link status from CORE_LNKSTS, + * which means that we need to force the link at the port override + * level to get the data to flow. We do use what the interrupt handler + * did determine before. + */ + if (port == 7) { + status->link = priv->port_sts[port].link; + reg = core_readl(priv, CORE_STS_OVERRIDE_GMIIP_PORT(7)); + reg |= SW_OVERRIDE; + if (status->link) + reg |= LINK_STS; + else + reg &= ~LINK_STS; + core_writel(priv, reg, CORE_STS_OVERRIDE_GMIIP_PORT(7)); + status->duplex = 1; + } else { + status->link = !!(link & (1 << port)); + status->duplex = !!(duplex & (1 << port)); + } + + switch (speed) { + case SPDSTS_10: + status->speed = SPEED_10; + break; + case SPDSTS_100: + status->speed = SPEED_100; + break; + case SPDSTS_1000: + status->speed = SPEED_1000; + break; + } + + if ((pause & (1 << port)) && + (pause & (1 << (port + PAUSESTS_TX_PAUSE_SHIFT)))) { + status->asym_pause = 1; + status->pause = 1; + } + + if (pause & (1 << port)) + status->pause = 1; +} + +static struct dsa_switch_driver bcm_sf2_switch_driver = { + .tag_protocol = htons(ETH_P_BRCMTAG), + .priv_size = sizeof(struct bcm_sf2_priv), + .probe = bcm_sf2_sw_probe, + .setup = bcm_sf2_sw_setup, + .set_addr = bcm_sf2_sw_set_addr, + .phy_read = bcm_sf2_sw_phy_read, + .phy_write = bcm_sf2_sw_phy_write, + .get_strings = bcm_sf2_sw_get_strings, + .get_ethtool_stats = bcm_sf2_sw_get_ethtool_stats, + .get_sset_count = bcm_sf2_sw_get_sset_count, + .adjust_link = bcm_sf2_sw_adjust_link, + .fixed_link_update = bcm_sf2_sw_fixed_link_update, +}; + +static int __init bcm_sf2_init(void) +{ + register_switch_driver(&bcm_sf2_switch_driver); + + return 0; +} +module_init(bcm_sf2_init); + +static void __exit bcm_sf2_exit(void) +{ + unregister_switch_driver(&bcm_sf2_switch_driver); +} +module_exit(bcm_sf2_exit); + +MODULE_AUTHOR("Broadcom Corporation"); +MODULE_DESCRIPTION("Driver for Broadcom Starfighter 2 ethernet switch chip"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:brcm-sf2"); diff --git a/drivers/net/dsa/bcm_sf2.h b/drivers/net/dsa/bcm_sf2.h new file mode 100644 index 000000000000..260bab313e58 --- /dev/null +++ b/drivers/net/dsa/bcm_sf2.h @@ -0,0 +1,140 @@ +/* + * Broadcom Starfighter2 private context + * + * Copyright (C) 2014, Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __BCM_SF2_H +#define __BCM_SF2_H + +#include <linux/platform_device.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/spinlock.h> +#include <linux/mutex.h> +#include <linux/mii.h> + +#include <net/dsa.h> + +#include "bcm_sf2_regs.h" + +struct bcm_sf2_hw_params { + u16 top_rev; + u16 core_rev; + u32 num_gphy; + u8 num_acb_queue; + u8 num_rgmii; + u8 num_ports; + u8 fcb_pause_override:1; + u8 acb_packets_inflight:1; +}; + +#define BCM_SF2_REGS_NAME {\ + "core", "reg", "intrl2_0", "intrl2_1", "fcb", "acb" \ +} + +#define BCM_SF2_REGS_NUM 6 + +struct bcm_sf2_port_status { + unsigned int link; +}; + +struct bcm_sf2_priv { + /* Base registers, keep those in order with BCM_SF2_REGS_NAME */ + void __iomem *core; + void __iomem *reg; + void __iomem *intrl2_0; + void __iomem *intrl2_1; + void __iomem *fcb; + void __iomem *acb; + + /* spinlock protecting access to the indirect registers */ + spinlock_t indir_lock; + + int irq0; + int irq1; + u32 irq0_stat; + u32 irq0_mask; + u32 irq1_stat; + u32 irq1_mask; + + /* Mutex protecting access to the MIB counters */ + struct mutex stats_mutex; + + struct bcm_sf2_hw_params hw_params; + + struct bcm_sf2_port_status port_sts[DSA_MAX_PORTS]; +}; + +struct bcm_sf2_hw_stats { + const char *string; + u16 reg; + u8 sizeof_stat; +}; + +#define SF2_IO_MACRO(name) \ +static inline u32 name##_readl(struct bcm_sf2_priv *priv, u32 off) \ +{ \ + return __raw_readl(priv->name + off); \ +} \ +static inline void name##_writel(struct bcm_sf2_priv *priv, \ + u32 val, u32 off) \ +{ \ + __raw_writel(val, priv->name + off); \ +} \ + +/* Accesses to 64-bits register requires us to latch the hi/lo pairs + * using the REG_DIR_DATA_{READ,WRITE} ancillary registers. The 'indir_lock' + * spinlock is automatically grabbed and released to provide relative + * atomiticy with latched reads/writes. + */ +#define SF2_IO64_MACRO(name) \ +static inline u64 name##_readq(struct bcm_sf2_priv *priv, u32 off) \ +{ \ + u32 indir, dir; \ + spin_lock(&priv->indir_lock); \ + indir = reg_readl(priv, REG_DIR_DATA_READ); \ + dir = __raw_readl(priv->name + off); \ + spin_unlock(&priv->indir_lock); \ + return (u64)indir << 32 | dir; \ +} \ +static inline void name##_writeq(struct bcm_sf2_priv *priv, u32 off, \ + u64 val) \ +{ \ + spin_lock(&priv->indir_lock); \ + reg_writel(priv, upper_32_bits(val), REG_DIR_DATA_WRITE); \ + __raw_writel(lower_32_bits(val), priv->name + off); \ + spin_unlock(&priv->indir_lock); \ +} + +#define SWITCH_INTR_L2(which) \ +static inline void intrl2_##which##_mask_clear(struct bcm_sf2_priv *priv, \ + u32 mask) \ +{ \ + intrl2_##which##_writel(priv, mask, INTRL2_CPU_MASK_CLEAR); \ + priv->irq##which##_mask &= ~(mask); \ +} \ +static inline void intrl2_##which##_mask_set(struct bcm_sf2_priv *priv, \ + u32 mask) \ +{ \ + intrl2_## which##_writel(priv, mask, INTRL2_CPU_MASK_SET); \ + priv->irq##which##_mask |= (mask); \ +} \ + +SF2_IO_MACRO(core); +SF2_IO_MACRO(reg); +SF2_IO64_MACRO(core); +SF2_IO_MACRO(intrl2_0); +SF2_IO_MACRO(intrl2_1); +SF2_IO_MACRO(fcb); +SF2_IO_MACRO(acb); + +SWITCH_INTR_L2(0); +SWITCH_INTR_L2(1); + +#endif /* __BCM_SF2_H */ diff --git a/drivers/net/dsa/bcm_sf2_regs.h b/drivers/net/dsa/bcm_sf2_regs.h new file mode 100644 index 000000000000..885c231b03b5 --- /dev/null +++ b/drivers/net/dsa/bcm_sf2_regs.h @@ -0,0 +1,227 @@ +/* + * Broadcom Starfighter 2 switch register defines + * + * Copyright (C) 2014, Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef __BCM_SF2_REGS_H +#define __BCM_SF2_REGS_H + +/* Register set relative to 'REG' */ +#define REG_SWITCH_CNTRL 0x00 +#define MDIO_MASTER_SEL (1 << 0) + +#define REG_SWITCH_STATUS 0x04 +#define REG_DIR_DATA_WRITE 0x08 +#define REG_DIR_DATA_READ 0x0C + +#define REG_SWITCH_REVISION 0x18 +#define SF2_REV_MASK 0xffff +#define SWITCH_TOP_REV_SHIFT 16 +#define SWITCH_TOP_REV_MASK 0xffff + +#define REG_PHY_REVISION 0x1C + +#define REG_SPHY_CNTRL 0x2C +#define IDDQ_BIAS (1 << 0) +#define EXT_PWR_DOWN (1 << 1) +#define FORCE_DLL_EN (1 << 2) +#define IDDQ_GLOBAL_PWR (1 << 3) +#define CK25_DIS (1 << 4) +#define PHY_RESET (1 << 5) +#define PHY_PHYAD_SHIFT 8 +#define PHY_PHYAD_MASK 0x1F + +#define REG_RGMII_0_BASE 0x34 +#define REG_RGMII_CNTRL 0x00 +#define REG_RGMII_IB_STATUS 0x04 +#define REG_RGMII_RX_CLOCK_DELAY_CNTRL 0x08 +#define REG_RGMII_CNTRL_SIZE 0x0C +#define REG_RGMII_CNTRL_P(x) (REG_RGMII_0_BASE + \ + ((x) * REG_RGMII_CNTRL_SIZE)) +/* Relative to REG_RGMII_CNTRL */ +#define RGMII_MODE_EN (1 << 0) +#define ID_MODE_DIS (1 << 1) +#define PORT_MODE_SHIFT 2 +#define INT_EPHY (0 << PORT_MODE_SHIFT) +#define INT_GPHY (1 << PORT_MODE_SHIFT) +#define EXT_EPHY (2 << PORT_MODE_SHIFT) +#define EXT_GPHY (3 << PORT_MODE_SHIFT) +#define EXT_REVMII (4 << PORT_MODE_SHIFT) +#define PORT_MODE_MASK 0x7 +#define RVMII_REF_SEL (1 << 5) +#define RX_PAUSE_EN (1 << 6) +#define TX_PAUSE_EN (1 << 7) +#define TX_CLK_STOP_EN (1 << 8) +#define LPI_COUNT_SHIFT 9 +#define LPI_COUNT_MASK 0x3F + +/* Register set relative to 'INTRL2_0' and 'INTRL2_1' */ +#define INTRL2_CPU_STATUS 0x00 +#define INTRL2_CPU_SET 0x04 +#define INTRL2_CPU_CLEAR 0x08 +#define INTRL2_CPU_MASK_STATUS 0x0c +#define INTRL2_CPU_MASK_SET 0x10 +#define INTRL2_CPU_MASK_CLEAR 0x14 + +/* Shared INTRL2_0 and INTRL2_ interrupt sources macros */ +#define P_LINK_UP_IRQ(x) (1 << (0 + (x))) +#define P_LINK_DOWN_IRQ(x) (1 << (1 + (x))) +#define P_ENERGY_ON_IRQ(x) (1 << (2 + (x))) +#define P_ENERGY_OFF_IRQ(x) (1 << (3 + (x))) +#define P_GPHY_IRQ(x) (1 << (4 + (x))) +#define P_NUM_IRQ 5 +#define P_IRQ_MASK(x) (P_LINK_UP_IRQ((x)) | \ + P_LINK_DOWN_IRQ((x)) | \ + P_ENERGY_ON_IRQ((x)) | \ + P_ENERGY_OFF_IRQ((x)) | \ + P_GPHY_IRQ((x))) + +/* INTRL2_0 interrupt sources */ +#define P0_IRQ_OFF 0 +#define MEM_DOUBLE_IRQ (1 << 5) +#define EEE_LPI_IRQ (1 << 6) +#define P5_CPU_WAKE_IRQ (1 << 7) +#define P8_CPU_WAKE_IRQ (1 << 8) +#define P7_CPU_WAKE_IRQ (1 << 9) +#define IEEE1588_IRQ (1 << 10) +#define MDIO_ERR_IRQ (1 << 11) +#define MDIO_DONE_IRQ (1 << 12) +#define GISB_ERR_IRQ (1 << 13) +#define UBUS_ERR_IRQ (1 << 14) +#define FAILOVER_ON_IRQ (1 << 15) +#define FAILOVER_OFF_IRQ (1 << 16) +#define TCAM_SOFT_ERR_IRQ (1 << 17) + +/* INTRL2_1 interrupt sources */ +#define P7_IRQ_OFF 0 +#define P_IRQ_OFF(x) ((6 - (x)) * P_NUM_IRQ) + +/* Register set relative to 'CORE' */ +#define CORE_G_PCTL_PORT0 0x00000 +#define CORE_G_PCTL_PORT(x) (CORE_G_PCTL_PORT0 + (x * 0x4)) +#define CORE_IMP_CTL 0x00020 +#define RX_DIS (1 << 0) +#define TX_DIS (1 << 1) +#define RX_BCST_EN (1 << 2) +#define RX_MCST_EN (1 << 3) +#define RX_UCST_EN (1 << 4) +#define G_MISTP_STATE_SHIFT 5 +#define G_MISTP_NO_STP (0 << G_MISTP_STATE_SHIFT) +#define G_MISTP_DIS_STATE (1 << G_MISTP_STATE_SHIFT) +#define G_MISTP_BLOCK_STATE (2 << G_MISTP_STATE_SHIFT) +#define G_MISTP_LISTEN_STATE (3 << G_MISTP_STATE_SHIFT) +#define G_MISTP_LEARN_STATE (4 << G_MISTP_STATE_SHIFT) +#define G_MISTP_FWD_STATE (5 << G_MISTP_STATE_SHIFT) +#define G_MISTP_STATE_MASK 0x7 + +#define CORE_SWMODE 0x0002c +#define SW_FWDG_MODE (1 << 0) +#define SW_FWDG_EN (1 << 1) +#define RTRY_LMT_DIS (1 << 2) + +#define CORE_STS_OVERRIDE_IMP 0x00038 +#define GMII_SPEED_UP_2G (1 << 6) +#define MII_SW_OR (1 << 7) + +#define CORE_NEW_CTRL 0x00084 +#define IP_MC (1 << 0) +#define OUTRANGEERR_DISCARD (1 << 1) +#define INRANGEERR_DISCARD (1 << 2) +#define CABLE_DIAG_LEN (1 << 3) +#define OVERRIDE_AUTO_PD_WAR (1 << 4) +#define EN_AUTO_PD_WAR (1 << 5) +#define UC_FWD_EN (1 << 6) +#define MC_FWD_EN (1 << 7) + +#define CORE_SWITCH_CTRL 0x00088 +#define MII_DUMB_FWDG_EN (1 << 6) + +#define CORE_SFT_LRN_CTRL 0x000f8 +#define SW_LEARN_CNTL(x) (1 << (x)) + +#define CORE_STS_OVERRIDE_GMIIP_PORT(x) (0x160 + (x) * 4) +#define LINK_STS (1 << 0) +#define DUPLX_MODE (1 << 1) +#define SPEED_SHIFT 2 +#define SPEED_MASK 0x3 +#define RXFLOW_CNTL (1 << 4) +#define TXFLOW_CNTL (1 << 5) +#define SW_OVERRIDE (1 << 6) + +#define CORE_WATCHDOG_CTRL 0x001e4 +#define SOFTWARE_RESET (1 << 7) +#define EN_CHIP_RST (1 << 6) +#define EN_SW_RESET (1 << 4) + +#define CORE_LNKSTS 0x00400 +#define LNK_STS_MASK 0x1ff + +#define CORE_SPDSTS 0x00410 +#define SPDSTS_10 0 +#define SPDSTS_100 1 +#define SPDSTS_1000 2 +#define SPDSTS_SHIFT 2 +#define SPDSTS_MASK 0x3 + +#define CORE_DUPSTS 0x00420 +#define CORE_DUPSTS_MASK 0x1ff + +#define CORE_PAUSESTS 0x00428 +#define PAUSESTS_TX_PAUSE_SHIFT 9 + +#define CORE_GMNCFGCFG 0x0800 +#define RST_MIB_CNT (1 << 0) +#define RXBPDU_EN (1 << 1) + +#define CORE_IMP0_PRT_ID 0x0804 + +#define CORE_BRCM_HDR_CTRL 0x0080c +#define BRCM_HDR_EN_P8 (1 << 0) +#define BRCM_HDR_EN_P5 (1 << 1) +#define BRCM_HDR_EN_P7 (1 << 2) + +#define CORE_BRCM_HDR_CTRL2 0x0828 + +#define CORE_HL_PRTC_CTRL 0x0940 +#define ARP_EN (1 << 0) +#define RARP_EN (1 << 1) +#define DHCP_EN (1 << 2) +#define ICMPV4_EN (1 << 3) +#define ICMPV6_EN (1 << 4) +#define ICMPV6_FWD_MODE (1 << 5) +#define IGMP_DIP_EN (1 << 8) +#define IGMP_RPTLVE_EN (1 << 9) +#define IGMP_RTPLVE_FWD_MODE (1 << 10) +#define IGMP_QRY_EN (1 << 11) +#define IGMP_QRY_FWD_MODE (1 << 12) +#define IGMP_UKN_EN (1 << 13) +#define IGMP_UKN_FWD_MODE (1 << 14) +#define MLD_RPTDONE_EN (1 << 15) +#define MLD_RPTDONE_FWD_MODE (1 << 16) +#define MLD_QRY_EN (1 << 17) +#define MLD_QRY_FWD_MODE (1 << 18) + +#define CORE_RST_MIB_CNT_EN 0x0950 + +#define CORE_BRCM_HDR_RX_DIS 0x0980 +#define CORE_BRCM_HDR_TX_DIS 0x0988 + +#define CORE_MEM_PSM_VDD_CTRL 0x2380 +#define P_TXQ_PSM_VDD_SHIFT 2 +#define P_TXQ_PSM_VDD_MASK 0x3 +#define P_TXQ_PSM_VDD(x) (P_TXQ_PSM_VDD_MASK << \ + ((x) * P_TXQ_PSM_VDD_SHIFT)) + +#define CORE_P0_MIB_OFFSET 0x8000 +#define P_MIB_SIZE 0x400 +#define CORE_P_MIB_OFFSET(x) (CORE_P0_MIB_OFFSET + (x) * P_MIB_SIZE) + +#define CORE_PORT_VLAN_CTL_PORT(x) (0xc400 + ((x) * 0x8)) +#define PORT_VLAN_CTRL_MASK 0x1ff + +#endif /* __BCM_SF2_REGS_H */ |