[media] dvb-usb: move it to drivers/media/usb/dvb-usb

As media/dvb will be removed, move it to a proper place.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 4813 insertions, 0 deletions

diff --git a/drivers/media/usb/dvb-usb/dib0700_devices.c b/drivers/media/usb/dvb-usb/dib0700_devices.c
new file mode 100644
index 000000000000..510001da6e83
--- /dev/null
+++ b/drivers/media/usb/dvb-usb/dib0700_devices.c
@@ -0,0 +1,4813 @@
+/* Linux driver for devices based on the DiBcom DiB0700 USB bridge
+ *
+ *	This program is free software; you can redistribute it and/or modify it
+ *	under the terms of the GNU General Public License as published by the Free
+ *	Software Foundation, version 2.
+ *
+ *  Copyright (C) 2005-9 DiBcom, SA et al
+ */
+#include "dib0700.h"
+
+#include "dib3000mc.h"
+#include "dib7000m.h"
+#include "dib7000p.h"
+#include "dib8000.h"
+#include "dib9000.h"
+#include "mt2060.h"
+#include "mt2266.h"
+#include "tuner-xc2028.h"
+#include "xc5000.h"
+#include "xc4000.h"
+#include "s5h1411.h"
+#include "dib0070.h"
+#include "dib0090.h"
+#include "lgdt3305.h"
+#include "mxl5007t.h"
+
+static int force_lna_activation;
+module_param(force_lna_activation, int, 0644);
+MODULE_PARM_DESC(force_lna_activation, "force the activation of Low-Noise-Amplifyer(s) (LNA), "
+		"if applicable for the device (default: 0=automatic/off).");
+
+struct dib0700_adapter_state {
+	int (*set_param_save) (struct dvb_frontend *);
+	const struct firmware *frontend_firmware;
+};
+
+/* Hauppauge Nova-T 500 (aka Bristol)
+ *  has a LNA on GPIO0 which is enabled by setting 1 */
+static struct mt2060_config bristol_mt2060_config[2] = {
+	{
+		.i2c_address = 0x60,
+		.clock_out   = 3,
+	}, {
+		.i2c_address = 0x61,
+	}
+};
+
+
+static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = {
+	.band_caps = BAND_VHF | BAND_UHF,
+	.setup     = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0),
+
+	.agc1_max = 42598,
+	.agc1_min = 17694,
+	.agc2_max = 45875,
+	.agc2_min = 0,
+
+	.agc1_pt1 = 0,
+	.agc1_pt2 = 59,
+
+	.agc1_slope1 = 0,
+	.agc1_slope2 = 69,
+
+	.agc2_pt1 = 0,
+	.agc2_pt2 = 59,
+
+	.agc2_slope1 = 111,
+	.agc2_slope2 = 28,
+};
+
+static struct dib3000mc_config bristol_dib3000mc_config[2] = {
+	{	.agc          = &bristol_dib3000p_mt2060_agc_config,
+		.max_time     = 0x196,
+		.ln_adc_level = 0x1cc7,
+		.output_mpeg2_in_188_bytes = 1,
+	},
+	{	.agc          = &bristol_dib3000p_mt2060_agc_config,
+		.max_time     = 0x196,
+		.ln_adc_level = 0x1cc7,
+		.output_mpeg2_in_188_bytes = 1,
+	}
+};
+
+static int bristol_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_state *st = adap->dev->priv;
+	if (adap->id == 0) {
+		dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 0); msleep(10);
+		dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 1); msleep(10);
+		dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
+		dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10);
+
+		if (force_lna_activation)
+			dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+		else
+			dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0);
+
+		if (dib3000mc_i2c_enumeration(&adap->dev->i2c_adap, 2, DEFAULT_DIB3000P_I2C_ADDRESS, bristol_dib3000mc_config) != 0) {
+			dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
+			return -ENODEV;
+		}
+	}
+	st->mt2060_if1[adap->id] = 1220;
+	return (adap->fe_adap[0].fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap,
+		(10 + adap->id) << 1, &bristol_dib3000mc_config[adap->id])) == NULL ? -ENODEV : 0;
+}
+
+static int eeprom_read(struct i2c_adapter *adap,u8 adrs,u8 *pval)
+{
+	struct i2c_msg msg[2] = {
+		{ .addr = 0x50, .flags = 0,        .buf = &adrs, .len = 1 },
+		{ .addr = 0x50, .flags = I2C_M_RD, .buf = pval,  .len = 1 },
+	};
+	if (i2c_transfer(adap, msg, 2) != 2) return -EREMOTEIO;
+	return 0;
+}
+
+static int bristol_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap;
+	struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe_adap[0].fe, 1);
+	s8 a;
+	int if1=1220;
+	if (adap->dev->udev->descriptor.idVendor  == cpu_to_le16(USB_VID_HAUPPAUGE) &&
+		adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) {
+		if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a;
+	}
+	return dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c,
+			  &bristol_mt2060_config[adap->id], if1) == NULL ?
+			  -ENODEV : 0;
+}
+
+/* STK7700D: Pinnacle/Terratec/Hauppauge Dual DVB-T Diversity */
+
+/* MT226x */
+static struct dibx000_agc_config stk7700d_7000p_mt2266_agc_config[2] = {
+	{
+		BAND_UHF,
+
+		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1,
+		* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
+		(0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8)
+	    | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
+
+		1130,
+		21,
+
+		0,
+		118,
+
+		0,
+		3530,
+		1,
+		0,
+
+		65535,
+		33770,
+		65535,
+		23592,
+
+		0,
+		62,
+		255,
+		64,
+		64,
+		132,
+		192,
+		80,
+		80,
+
+		17,
+		27,
+		23,
+		51,
+
+		1,
+	}, {
+		BAND_VHF | BAND_LBAND,
+
+		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1,
+		* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
+		(0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8)
+	    | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
+
+		2372,
+		21,
+
+		0,
+		118,
+
+		0,
+		3530,
+		1,
+		0,
+
+		65535,
+		0,
+		65535,
+		23592,
+
+		0,
+		128,
+		128,
+		128,
+		0,
+		128,
+		253,
+		81,
+		0,
+
+		17,
+		27,
+		23,
+		51,
+
+		1,
+	}
+};
+
+static struct dibx000_bandwidth_config stk7700d_mt2266_pll_config = {
+	60000, 30000,
+	1, 8, 3, 1, 0,
+	0, 0, 1, 1, 2,
+	(3 << 14) | (1 << 12) | (524 << 0),
+	0,
+	20452225,
+};
+
+static struct dib7000p_config stk7700d_dib7000p_mt2266_config[] = {
+	{	.output_mpeg2_in_188_bytes = 1,
+		.hostbus_diversity = 1,
+		.tuner_is_baseband = 1,
+
+		.agc_config_count = 2,
+		.agc = stk7700d_7000p_mt2266_agc_config,
+		.bw  = &stk7700d_mt2266_pll_config,
+
+		.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+		.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+		.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+	},
+	{	.output_mpeg2_in_188_bytes = 1,
+		.hostbus_diversity = 1,
+		.tuner_is_baseband = 1,
+
+		.agc_config_count = 2,
+		.agc = stk7700d_7000p_mt2266_agc_config,
+		.bw  = &stk7700d_mt2266_pll_config,
+
+		.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+		.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+		.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+	}
+};
+
+static struct mt2266_config stk7700d_mt2266_config[2] = {
+	{	.i2c_address = 0x60
+	},
+	{	.i2c_address = 0x60
+	}
+};
+
+static int stk7700P2_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	if (adap->id == 0) {
+		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+		msleep(10);
+		dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+		dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+		dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+		dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+		msleep(10);
+		dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+		msleep(10);
+		if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
+					     stk7700d_dib7000p_mt2266_config)
+		    != 0) {
+			err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n", __func__);
+			return -ENODEV;
+		}
+	}
+
+	adap->fe_adap[0].fe =
+		dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,
+			   0x80 + (adap->id << 1),
+			   &stk7700d_dib7000p_mt2266_config[adap->id]);
+
+	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int stk7700d_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	if (adap->id == 0) {
+		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+		msleep(10);
+		dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+		dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+		dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+		dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+		msleep(10);
+		dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+		msleep(10);
+		dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+		if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 2, 18,
+					     stk7700d_dib7000p_mt2266_config)
+		    != 0) {
+			err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n", __func__);
+			return -ENODEV;
+		}
+	}
+
+	adap->fe_adap[0].fe =
+		dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,
+			   0x80 + (adap->id << 1),
+			   &stk7700d_dib7000p_mt2266_config[adap->id]);
+
+	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int stk7700d_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct i2c_adapter *tun_i2c;
+	tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+	return dvb_attach(mt2266_attach, adap->fe_adap[0].fe, tun_i2c,
+		&stk7700d_mt2266_config[adap->id]) == NULL ? -ENODEV : 0;
+}
+
+/* STK7700-PH: Digital/Analog Hybrid Tuner, e.h. Cinergy HT USB HE */
+static struct dibx000_agc_config xc3028_agc_config = {
+	BAND_VHF | BAND_UHF,       /* band_caps */
+
+	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0,
+	 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+	 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
+	(0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) |
+	(3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */
+
+	712,	/* inv_gain */
+	21,	/* time_stabiliz */
+
+	0,	/* alpha_level */
+	118,	/* thlock */
+
+	0,	/* wbd_inv */
+	2867,	/* wbd_ref */
+	0,	/* wbd_sel */
+	2,	/* wbd_alpha */
+
+	0,	/* agc1_max */
+	0,	/* agc1_min */
+	39718,	/* agc2_max */
+	9930,	/* agc2_min */
+	0,	/* agc1_pt1 */
+	0,	/* agc1_pt2 */
+	0,	/* agc1_pt3 */
+	0,	/* agc1_slope1 */
+	0,	/* agc1_slope2 */
+	0,	/* agc2_pt1 */
+	128,	/* agc2_pt2 */
+	29,	/* agc2_slope1 */
+	29,	/* agc2_slope2 */
+
+	17,	/* alpha_mant */
+	27,	/* alpha_exp */
+	23,	/* beta_mant */
+	51,	/* beta_exp */
+
+	1,	/* perform_agc_softsplit */
+};
+
+/* PLL Configuration for COFDM BW_MHz = 8.00 with external clock = 30.00 */
+static struct dibx000_bandwidth_config xc3028_bw_config = {
+	60000, 30000, /* internal, sampling */
+	1, 8, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass */
+	0, 0, 1, 1, 0, /* misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc,
+			  modulo */
+	(3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */
+	(1 << 25) | 5816102, /* ifreq = 5.200000 MHz */
+	20452225, /* timf */
+	30000000, /* xtal_hz */
+};
+
+static struct dib7000p_config stk7700ph_dib7700_xc3028_config = {
+	.output_mpeg2_in_188_bytes = 1,
+	.tuner_is_baseband = 1,
+
+	.agc_config_count = 1,
+	.agc = &xc3028_agc_config,
+	.bw  = &xc3028_bw_config,
+
+	.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+};
+
+static int stk7700ph_xc3028_callback(void *ptr, int component,
+				     int command, int arg)
+{
+	struct dvb_usb_adapter *adap = ptr;
+
+	switch (command) {
+	case XC2028_TUNER_RESET:
+		/* Send the tuner in then out of reset */
+		dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 0); msleep(10);
+		dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
+		break;
+	case XC2028_RESET_CLK:
+		break;
+	default:
+		err("%s: unknown command %d, arg %d\n", __func__,
+			command, arg);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static struct xc2028_ctrl stk7700ph_xc3028_ctrl = {
+	.fname = XC2028_DEFAULT_FIRMWARE,
+	.max_len = 64,
+	.demod = XC3028_FE_DIBCOM52,
+};
+
+static struct xc2028_config stk7700ph_xc3028_config = {
+	.i2c_addr = 0x61,
+	.ctrl = &stk7700ph_xc3028_ctrl,
+};
+
+static int stk7700ph_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct usb_device_descriptor *desc = &adap->dev->udev->descriptor;
+
+	if (desc->idVendor  == cpu_to_le16(USB_VID_PINNACLE) &&
+	    desc->idProduct == cpu_to_le16(USB_PID_PINNACLE_EXPRESSCARD_320CX))
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+	else
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+	msleep(10);
+
+	if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
+				     &stk7700ph_dib7700_xc3028_config) != 0) {
+		err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n",
+		    __func__);
+		return -ENODEV;
+	}
+
+	adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
+		&stk7700ph_dib7700_xc3028_config);
+
+	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct i2c_adapter *tun_i2c;
+
+	tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe,
+		DIBX000_I2C_INTERFACE_TUNER, 1);
+
+	stk7700ph_xc3028_config.i2c_adap = tun_i2c;
+
+	/* FIXME: generalize & move to common area */
+	adap->fe_adap[0].fe->callback = stk7700ph_xc3028_callback;
+
+	return dvb_attach(xc2028_attach, adap->fe_adap[0].fe, &stk7700ph_xc3028_config)
+		== NULL ? -ENODEV : 0;
+}
+
+#define DEFAULT_RC_INTERVAL 50
+
+static u8 rc_request[] = { REQUEST_POLL_RC, 0 };
+
+/* Number of keypresses to ignore before start repeating */
+#define RC_REPEAT_DELAY 6
+
+/*
+ * This function is used only when firmware is < 1.20 version. Newer
+ * firmwares use bulk mode, with functions implemented at dib0700_core,
+ * at dib0700_rc_urb_completion()
+ */
+static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d)
+{
+	u8 key[4];
+	u32 keycode;
+	u8 toggle;
+	int i;
+	struct dib0700_state *st = d->priv;
+
+	if (st->fw_version >= 0x10200) {
+		/* For 1.20 firmware , We need to keep the RC polling
+		   callback so we can reuse the input device setup in
+		   dvb-usb-remote.c.  However, the actual work is being done
+		   in the bulk URB completion handler. */
+		return 0;
+	}
+
+	i = dib0700_ctrl_rd(d, rc_request, 2, key, 4);
+	if (i <= 0) {
+		err("RC Query Failed");
+		return -1;
+	}
+
+	/* losing half of KEY_0 events from Philipps rc5 remotes.. */
+	if (key[0] == 0 && key[1] == 0 && key[2] == 0 && key[3] == 0)
+		return 0;
+
+	/* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)key[3-2],(int)key[3-3],(int)key[3-1],(int)key[3]);  */
+
+	dib0700_rc_setup(d); /* reset ir sensor data to prevent false events */
+
+	d->last_event = 0;
+	switch (d->props.rc.core.protocol) {
+	case RC_TYPE_NEC:
+		/* NEC protocol sends repeat code as 0 0 0 FF */
+		if ((key[3-2] == 0x00) && (key[3-3] == 0x00) &&
+		    (key[3] == 0xff))
+			keycode = d->last_event;
+		else {
+			keycode = key[3-2] << 8 | key[3-3];
+			d->last_event = keycode;
+		}
+
+		rc_keydown(d->rc_dev, keycode, 0);
+		break;
+	default:
+		/* RC-5 protocol changes toggle bit on new keypress */
+		keycode = key[3-2] << 8 | key[3-3];
+		toggle = key[3-1];
+		rc_keydown(d->rc_dev, keycode, toggle);
+
+		break;
+	}
+	return 0;
+}
+
+/* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */
+static struct dibx000_agc_config stk7700p_7000m_mt2060_agc_config = {
+	BAND_UHF | BAND_VHF,
+
+	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
+	 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
+	(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
+	| (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
+
+	712,
+	41,
+
+	0,
+	118,
+
+	0,
+	4095,
+	0,
+	0,
+
+	42598,
+	17694,
+	45875,
+	2621,
+	0,
+	76,
+	139,
+	52,
+	59,
+	107,
+	172,
+	57,
+	70,
+
+	21,
+	25,
+	28,
+	48,
+
+	1,
+	{  0,
+	   107,
+	   51800,
+	   24700
+	},
+};
+
+static struct dibx000_agc_config stk7700p_7000p_mt2060_agc_config = {
+	BAND_UHF | BAND_VHF,
+
+	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
+	 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
+	(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
+	| (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
+
+	712,
+	41,
+
+	0,
+	118,
+
+	0,
+	4095,
+	0,
+	0,
+
+	42598,
+	16384,
+	42598,
+	    0,
+
+	  0,
+	137,
+	255,
+
+	  0,
+	255,
+
+	0,
+	0,
+
+	 0,
+	41,
+
+	15,
+	25,
+
+	28,
+	48,
+
+	0,
+};
+
+static struct dibx000_bandwidth_config stk7700p_pll_config = {
+	60000, 30000,
+	1, 8, 3, 1, 0,
+	0, 0, 1, 1, 0,
+	(3 << 14) | (1 << 12) | (524 << 0),
+	60258167,
+	20452225,
+	30000000,
+};
+
+static struct dib7000m_config stk7700p_dib7000m_config = {
+	.dvbt_mode = 1,
+	.output_mpeg2_in_188_bytes = 1,
+	.quartz_direct = 1,
+
+	.agc_config_count = 1,
+	.agc = &stk7700p_7000m_mt2060_agc_config,
+	.bw  = &stk7700p_pll_config,
+
+	.gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
+};
+
+static struct dib7000p_config stk7700p_dib7000p_config = {
+	.output_mpeg2_in_188_bytes = 1,
+
+	.agc_config_count = 1,
+	.agc = &stk7700p_7000p_mt2060_agc_config,
+	.bw  = &stk7700p_pll_config,
+
+	.gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
+};
+
+static int stk7700p_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_state *st = adap->dev->priv;
+	/* unless there is no real power management in DVB - we leave the device on GPIO6 */
+
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+	dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 0); msleep(50);
+
+	dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 1); msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO9,  GPIO_OUT, 1);
+
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(100);
+
+	dib0700_set_gpio(adap->dev,  GPIO0, GPIO_OUT, 1);
+
+	st->mt2060_if1[0] = 1220;
+
+	if (dib7000pc_detection(&adap->dev->i2c_adap)) {
+		adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000p_config);
+		st->is_dib7000pc = 1;
+	} else
+		adap->fe_adap[0].fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config);
+
+	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static struct mt2060_config stk7700p_mt2060_config = {
+	0x60
+};
+
+static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap;
+	struct dib0700_state *st = adap->dev->priv;
+	struct i2c_adapter *tun_i2c;
+	s8 a;
+	int if1=1220;
+	if (adap->dev->udev->descriptor.idVendor  == cpu_to_le16(USB_VID_HAUPPAUGE) &&
+		adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_STICK)) {
+		if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a;
+	}
+	if (st->is_dib7000pc)
+		tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+	else
+		tun_i2c = dib7000m_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+
+	return dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c, &stk7700p_mt2060_config,
+		if1) == NULL ? -ENODEV : 0;
+}
+
+/* DIB7070 generic */
+static struct dibx000_agc_config dib7070_agc_config = {
+	BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
+	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
+	 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
+	(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
+	| (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
+
+	600,
+	10,
+
+	0,
+	118,
+
+	0,
+	3530,
+	1,
+	5,
+
+	65535,
+		0,
+
+	65535,
+	0,
+
+	0,
+	40,
+	183,
+	206,
+	255,
+	72,
+	152,
+	88,
+	90,
+
+	17,
+	27,
+	23,
+	51,
+
+	0,
+};
+
+static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff)
+{
+	deb_info("reset: %d", onoff);
+	return dib7000p_set_gpio(fe, 8, 0, !onoff);
+}
+
+static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff)
+{
+	deb_info("sleep: %d", onoff);
+	return dib7000p_set_gpio(fe, 9, 0, onoff);
+}
+
+static struct dib0070_config dib7070p_dib0070_config[2] = {
+	{
+		.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+		.reset = dib7070_tuner_reset,
+		.sleep = dib7070_tuner_sleep,
+		.clock_khz = 12000,
+		.clock_pad_drive = 4,
+		.charge_pump = 2,
+	}, {
+		.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+		.reset = dib7070_tuner_reset,
+		.sleep = dib7070_tuner_sleep,
+		.clock_khz = 12000,
+		.charge_pump = 2,
+	}
+};
+
+static struct dib0070_config dib7770p_dib0070_config = {
+	 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+	 .reset = dib7070_tuner_reset,
+	 .sleep = dib7070_tuner_sleep,
+	 .clock_khz = 12000,
+	 .clock_pad_drive = 0,
+	 .flip_chip = 1,
+	 .charge_pump = 2,
+};
+
+static int dib7070_set_param_override(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	u16 offset;
+	u8 band = BAND_OF_FREQUENCY(p->frequency/1000);
+	switch (band) {
+		case BAND_VHF: offset = 950; break;
+		case BAND_UHF:
+		default: offset = 550; break;
+	}
+	deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
+	dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
+	return state->set_param_save(fe);
+}
+
+static int dib7770_set_param_override(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	 u16 offset;
+	 u8 band = BAND_OF_FREQUENCY(p->frequency/1000);
+	 switch (band) {
+	 case BAND_VHF:
+		  dib7000p_set_gpio(fe, 0, 0, 1);
+		  offset = 850;
+		  break;
+	 case BAND_UHF:
+	 default:
+		  dib7000p_set_gpio(fe, 0, 0, 0);
+		  offset = 250;
+		  break;
+	 }
+	 deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
+	 dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
+	 return state->set_param_save(fe);
+}
+
+static int dib7770p_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	 struct dib0700_adapter_state *st = adap->priv;
+	 struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe,
+			 DIBX000_I2C_INTERFACE_TUNER, 1);
+
+	 if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c,
+			&dib7770p_dib0070_config) == NULL)
+		 return -ENODEV;
+
+	 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+	 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7770_set_param_override;
+	 return 0;
+}
+
+static int dib7070p_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *st = adap->priv;
+	struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+
+	if (adap->id == 0) {
+		if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib7070p_dib0070_config[0]) == NULL)
+			return -ENODEV;
+	} else {
+		if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib7070p_dib0070_config[1]) == NULL)
+			return -ENODEV;
+	}
+
+	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7070_set_param_override;
+	return 0;
+}
+
+static int stk7700p_pid_filter(struct dvb_usb_adapter *adapter, int index,
+		u16 pid, int onoff)
+{
+	struct dib0700_state *st = adapter->dev->priv;
+	if (st->is_dib7000pc)
+		return dib7000p_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
+	return dib7000m_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
+}
+
+static int stk7700p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
+{
+	struct dib0700_state *st = adapter->dev->priv;
+	if (st->is_dib7000pc)
+		return dib7000p_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
+	return dib7000m_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
+}
+
+static int stk70x0p_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff)
+{
+	return dib7000p_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
+}
+
+static int stk70x0p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
+{
+	return dib7000p_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
+}
+
+static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = {
+	60000, 15000,
+	1, 20, 3, 1, 0,
+	0, 0, 1, 1, 2,
+	(3 << 14) | (1 << 12) | (524 << 0),
+	(0 << 25) | 0,
+	20452225,
+	12000000,
+};
+
+static struct dib7000p_config dib7070p_dib7000p_config = {
+	.output_mpeg2_in_188_bytes = 1,
+
+	.agc_config_count = 1,
+	.agc = &dib7070_agc_config,
+	.bw  = &dib7070_bw_config_12_mhz,
+	.tuner_is_baseband = 1,
+	.spur_protect = 1,
+
+	.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+	.hostbus_diversity = 1,
+};
+
+/* STK7070P */
+static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
+	if (p->idVendor  == cpu_to_le16(USB_VID_PINNACLE) &&
+	    p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
+		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+	else
+		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
+				     &dib7070p_dib7000p_config) != 0) {
+		err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n",
+		    __func__);
+		return -ENODEV;
+	}
+
+	adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
+		&dib7070p_dib7000p_config);
+	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+/* STK7770P */
+static struct dib7000p_config dib7770p_dib7000p_config = {
+	.output_mpeg2_in_188_bytes = 1,
+
+	.agc_config_count = 1,
+	.agc = &dib7070_agc_config,
+	.bw  = &dib7070_bw_config_12_mhz,
+	.tuner_is_baseband = 1,
+	.spur_protect = 1,
+
+	.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+	.hostbus_diversity = 1,
+	.enable_current_mirror = 1,
+	.disable_sample_and_hold = 0,
+};
+
+static int stk7770p_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
+	if (p->idVendor  == cpu_to_le16(USB_VID_PINNACLE) &&
+	    p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
+		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+	else
+		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
+				     &dib7770p_dib7000p_config) != 0) {
+		err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n",
+		    __func__);
+		return -ENODEV;
+	}
+
+	adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
+		&dib7770p_dib7000p_config);
+	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+/* DIB807x generic */
+static struct dibx000_agc_config dib807x_agc_config[2] = {
+	{
+		BAND_VHF,
+		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
+		 * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
+		 * P_agc_inv_pwm2=0,P_agc_inh_dc_rv_est=0,
+		 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
+		 * P_agc_write=0 */
+		(0 << 15) | (0 << 14) | (7 << 11) | (0 << 10) | (0 << 9) |
+			(0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
+			(0 << 0), /* setup*/
+
+		600, /* inv_gain*/
+		10,  /* time_stabiliz*/
+
+		0,  /* alpha_level*/
+		118,  /* thlock*/
+
+		0,     /* wbd_inv*/
+		3530,  /* wbd_ref*/
+		1,     /* wbd_sel*/
+		5,     /* wbd_alpha*/
+
+		65535,  /* agc1_max*/
+		0,  /* agc1_min*/
+
+		65535,  /* agc2_max*/
+		0,      /* agc2_min*/
+
+		0,      /* agc1_pt1*/
+		40,     /* agc1_pt2*/
+		183,    /* agc1_pt3*/
+		206,    /* agc1_slope1*/
+		255,    /* agc1_slope2*/
+		72,     /* agc2_pt1*/
+		152,    /* agc2_pt2*/
+		88,     /* agc2_slope1*/
+		90,     /* agc2_slope2*/
+
+		17,  /* alpha_mant*/
+		27,  /* alpha_exp*/
+		23,  /* beta_mant*/
+		51,  /* beta_exp*/
+
+		0,  /* perform_agc_softsplit*/
+	}, {
+		BAND_UHF,
+		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
+		 * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
+		 * P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+		 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
+		 * P_agc_write=0 */
+		(0 << 15) | (0 << 14) | (1 << 11) | (0 << 10) | (0 << 9) |
+			(0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
+			(0 << 0), /* setup */
+
+		600, /* inv_gain*/
+		10,  /* time_stabiliz*/
+
+		0,  /* alpha_level*/
+		118,  /* thlock*/
+
+		0,     /* wbd_inv*/
+		3530,  /* wbd_ref*/
+		1,     /* wbd_sel*/
+		5,     /* wbd_alpha*/
+
+		65535,  /* agc1_max*/
+		0,  /* agc1_min*/
+
+		65535,  /* agc2_max*/
+		0,      /* agc2_min*/
+
+		0,      /* agc1_pt1*/
+		40,     /* agc1_pt2*/
+		183,    /* agc1_pt3*/
+		206,    /* agc1_slope1*/
+		255,    /* agc1_slope2*/
+		72,     /* agc2_pt1*/
+		152,    /* agc2_pt2*/
+		88,     /* agc2_slope1*/
+		90,     /* agc2_slope2*/
+
+		17,  /* alpha_mant*/
+		27,  /* alpha_exp*/
+		23,  /* beta_mant*/
+		51,  /* beta_exp*/
+
+		0,  /* perform_agc_softsplit*/
+	}
+};
+
+static struct dibx000_bandwidth_config dib807x_bw_config_12_mhz = {
+	60000, 15000, /* internal, sampling*/
+	1, 20, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass*/
+	0, 0, 1, 1, 2, /* misc: refdiv, bypclk_div, IO_CLK_en_core,
+			  ADClkSrc, modulo */
+	(3 << 14) | (1 << 12) | (599 << 0), /* sad_cfg: refsel, sel, freq_15k*/
+	(0 << 25) | 0, /* ifreq = 0.000000 MHz*/
+	18179755, /* timf*/
+	12000000, /* xtal_hz*/
+};
+
+static struct dib8000_config dib807x_dib8000_config[2] = {
+	{
+		.output_mpeg2_in_188_bytes = 1,
+
+		.agc_config_count = 2,
+		.agc = dib807x_agc_config,
+		.pll = &dib807x_bw_config_12_mhz,
+		.tuner_is_baseband = 1,
+
+		.gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
+		.gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
+		.gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
+
+		.hostbus_diversity = 1,
+		.div_cfg = 1,
+		.agc_control = &dib0070_ctrl_agc_filter,
+		.output_mode = OUTMODE_MPEG2_FIFO,
+		.drives = 0x2d98,
+	}, {
+		.output_mpeg2_in_188_bytes = 1,
+
+		.agc_config_count = 2,
+		.agc = dib807x_agc_config,
+		.pll = &dib807x_bw_config_12_mhz,
+		.tuner_is_baseband = 1,
+
+		.gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
+		.gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
+		.gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
+
+		.hostbus_diversity = 1,
+		.agc_control = &dib0070_ctrl_agc_filter,
+		.output_mode = OUTMODE_MPEG2_FIFO,
+		.drives = 0x2d98,
+	}
+};
+
+static int dib80xx_tuner_reset(struct dvb_frontend *fe, int onoff)
+{
+	return dib8000_set_gpio(fe, 5, 0, !onoff);
+}
+
+static int dib80xx_tuner_sleep(struct dvb_frontend *fe, int onoff)
+{
+	return dib8000_set_gpio(fe, 0, 0, onoff);
+}
+
+static const struct dib0070_wbd_gain_cfg dib8070_wbd_gain_cfg[] = {
+    { 240,      7},
+    { 0xffff,   6},
+};
+
+static struct dib0070_config dib807x_dib0070_config[2] = {
+	{
+		.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+		.reset = dib80xx_tuner_reset,
+		.sleep = dib80xx_tuner_sleep,
+		.clock_khz = 12000,
+		.clock_pad_drive = 4,
+		.vga_filter = 1,
+		.force_crystal_mode = 1,
+		.enable_third_order_filter = 1,
+		.charge_pump = 0,
+		.wbd_gain = dib8070_wbd_gain_cfg,
+		.osc_buffer_state = 0,
+		.freq_offset_khz_uhf = -100,
+		.freq_offset_khz_vhf = -100,
+	}, {
+		.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+		.reset = dib80xx_tuner_reset,
+		.sleep = dib80xx_tuner_sleep,
+		.clock_khz = 12000,
+		.clock_pad_drive = 2,
+		.vga_filter = 1,
+		.force_crystal_mode = 1,
+		.enable_third_order_filter = 1,
+		.charge_pump = 0,
+		.wbd_gain = dib8070_wbd_gain_cfg,
+		.osc_buffer_state = 0,
+		.freq_offset_khz_uhf = -25,
+		.freq_offset_khz_vhf = -25,
+	}
+};
+
+static int dib807x_set_param_override(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	u16 offset = dib0070_wbd_offset(fe);
+	u8 band = BAND_OF_FREQUENCY(p->frequency/1000);
+	switch (band) {
+	case BAND_VHF:
+		offset += 750;
+		break;
+	case BAND_UHF:  /* fall-thru wanted */
+	default:
+		offset += 250; break;
+	}
+	deb_info("WBD for DiB8000: %d\n", offset);
+	dib8000_set_wbd_ref(fe, offset);
+
+	return state->set_param_save(fe);
+}
+
+static int dib807x_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *st = adap->priv;
+	struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe_adap[0].fe,
+			DIBX000_I2C_INTERFACE_TUNER, 1);
+
+	if (adap->id == 0) {
+		if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c,
+				&dib807x_dib0070_config[0]) == NULL)
+			return -ENODEV;
+	} else {
+		if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c,
+				&dib807x_dib0070_config[1]) == NULL)
+			return -ENODEV;
+	}
+
+	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib807x_set_param_override;
+	return 0;
+}
+
+static int stk80xx_pid_filter(struct dvb_usb_adapter *adapter, int index,
+	u16 pid, int onoff)
+{
+	return dib8000_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
+}
+
+static int stk80xx_pid_filter_ctrl(struct dvb_usb_adapter *adapter,
+		int onoff)
+{
+	return dib8000_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
+}
+
+/* STK807x */
+static int stk807x_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
+				0x80, 0);
+
+	adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80,
+			      &dib807x_dib8000_config[0]);
+
+	return adap->fe_adap[0].fe == NULL ?  -ENODEV : 0;
+}
+
+/* STK807xPVR */
+static int stk807xpvr_frontend_attach0(struct dvb_usb_adapter *adap)
+{
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+	msleep(30);
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(500);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	/* initialize IC 0 */
+	dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x22, 0x80, 0);
+
+	adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80,
+			      &dib807x_dib8000_config[0]);
+
+	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int stk807xpvr_frontend_attach1(struct dvb_usb_adapter *adap)
+{
+	/* initialize IC 1 */
+	dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x12, 0x82, 0);
+
+	adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x82,
+			      &dib807x_dib8000_config[1]);
+
+	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+/* STK8096GP */
+static struct dibx000_agc_config dib8090_agc_config[2] = {
+	{
+	BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
+	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1,
+	 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+	 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
+	(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
+	| (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
+
+	787,
+	10,
+
+	0,
+	118,
+
+	0,
+	3530,
+	1,
+	5,
+
+	65535,
+	0,
+
+	65535,
+	0,
+
+	0,
+	32,
+	114,
+	143,
+	144,
+	114,
+	227,
+	116,
+	117,
+
+	28,
+	26,
+	31,
+	51,
+
+	0,
+	},
+	{
+	BAND_CBAND,
+	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1,
+	 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+	 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
+	(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
+	| (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
+
+	787,
+	10,
+
+	0,
+	118,
+
+	0,
+	3530,
+	1,
+	5,
+
+	0,
+	0,
+
+	65535,
+	0,
+
+	0,
+	32,
+	114,
+	143,
+	144,
+	114,
+	227,
+	116,
+	117,
+
+	28,
+	26,
+	31,
+	51,
+
+	0,
+	}
+};
+
+static struct dibx000_bandwidth_config dib8090_pll_config_12mhz = {
+	54000, 13500,
+	1, 18, 3, 1, 0,
+	0, 0, 1, 1, 2,
+	(3 << 14) | (1 << 12) | (599 << 0),
+	(0 << 25) | 0,
+	20199727,
+	12000000,
+};
+
+static int dib8090_get_adc_power(struct dvb_frontend *fe)
+{
+	return dib8000_get_adc_power(fe, 1);
+}
+
+static struct dib8000_config dib809x_dib8000_config[2] = {
+	{
+	.output_mpeg2_in_188_bytes = 1,
+
+	.agc_config_count = 2,
+	.agc = dib8090_agc_config,
+	.agc_control = dib0090_dcc_freq,
+	.pll = &dib8090_pll_config_12mhz,
+	.tuner_is_baseband = 1,
+
+	.gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
+
+	.hostbus_diversity = 1,
+	.div_cfg = 0x31,
+	.output_mode = OUTMODE_MPEG2_FIFO,
+	.drives = 0x2d98,
+	.diversity_delay = 48,
+	.refclksel = 3,
+	}, {
+	.output_mpeg2_in_188_bytes = 1,
+
+	.agc_config_count = 2,
+	.agc = dib8090_agc_config,
+	.agc_control = dib0090_dcc_freq,
+	.pll = &dib8090_pll_config_12mhz,
+	.tuner_is_baseband = 1,
+
+	.gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
+
+	.hostbus_diversity = 1,
+	.div_cfg = 0x31,
+	.output_mode = OUTMODE_DIVERSITY,
+	.drives = 0x2d08,
+	.diversity_delay = 1,
+	.refclksel = 3,
+	}
+};
+
+static struct dib0090_wbd_slope dib8090_wbd_table[] = {
+	/* max freq ; cold slope ; cold offset ; warm slope ; warm offset ; wbd gain */
+	{ 120,     0, 500,  0,   500, 4 }, /* CBAND */
+	{ 170,     0, 450,  0,   450, 4 }, /* CBAND */
+	{ 380,    48, 373, 28,   259, 6 }, /* VHF */
+	{ 860,    34, 700, 36,   616, 6 }, /* high UHF */
+	{ 0xFFFF, 34, 700, 36,   616, 6 }, /* default */
+};
+
+static struct dib0090_config dib809x_dib0090_config = {
+	.io.pll_bypass = 1,
+	.io.pll_range = 1,
+	.io.pll_prediv = 1,
+	.io.pll_loopdiv = 20,
+	.io.adc_clock_ratio = 8,
+	.io.pll_int_loop_filt = 0,
+	.io.clock_khz = 12000,
+	.reset = dib80xx_tuner_reset,
+	.sleep = dib80xx_tuner_sleep,
+	.clkouttobamse = 1,
+	.analog_output = 1,
+	.i2c_address = DEFAULT_DIB0090_I2C_ADDRESS,
+	.use_pwm_agc = 1,
+	.clkoutdrive = 1,
+	.get_adc_power = dib8090_get_adc_power,
+	.freq_offset_khz_uhf = -63,
+	.freq_offset_khz_vhf = -143,
+	.wbd = dib8090_wbd_table,
+	.fref_clock_ratio = 6,
+};
+
+static int dib8096_set_param_override(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	struct dib0700_adapter_state *state = adap->priv;
+	u8 band = BAND_OF_FREQUENCY(p->frequency/1000);
+	u16 target;
+	int ret = 0;
+	enum frontend_tune_state tune_state = CT_SHUTDOWN;
+	u16 ltgain, rf_gain_limit;
+
+	ret = state->set_param_save(fe);
+	if (ret < 0)
+		return ret;
+
+	target = (dib0090_get_wbd_target(fe) * 8 * 18 / 33 + 1) / 2;
+	dib8000_set_wbd_ref(fe, target);
+
+
+	if (band == BAND_CBAND) {
+		deb_info("tuning in CBAND - soft-AGC startup\n");
+		dib0090_set_tune_state(fe, CT_AGC_START);
+		do {
+			ret = dib0090_gain_control(fe);
+			msleep(ret);
+			tune_state = dib0090_get_tune_state(fe);
+			if (tune_state == CT_AGC_STEP_0)
+				dib8000_set_gpio(fe, 6, 0, 1);
+			else if (tune_state == CT_AGC_STEP_1) {
+				dib0090_get_current_gain(fe, NULL, NULL, &rf_gain_limit, &ltgain);
+				if (rf_gain_limit == 0)
+					dib8000_set_gpio(fe, 6, 0, 0);
+			}
+		} while (tune_state < CT_AGC_STOP);
+		dib0090_pwm_gain_reset(fe);
+		dib8000_pwm_agc_reset(fe);
+		dib8000_set_tune_state(fe, CT_DEMOD_START);
+	} else {
+		deb_info("not tuning in CBAND - standard AGC startup\n");
+		dib0090_pwm_gain_reset(fe);
+	}
+
+	return 0;
+}
+
+static int dib809x_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *st = adap->priv;
+	struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+
+	if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL)
+		return -ENODEV;
+
+	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096_set_param_override;
+	return 0;
+}
+
+static int stk809x_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, 0x80, 0);
+
+	adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config[0]);
+
+	return adap->fe_adap[0].fe == NULL ?  -ENODEV : 0;
+}
+
+static int nim8096md_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *st = adap->priv;
+	struct i2c_adapter *tun_i2c;
+	struct dvb_frontend *fe_slave  = dib8000_get_slave_frontend(adap->fe_adap[0].fe, 1);
+
+	if (fe_slave) {
+		tun_i2c = dib8000_get_i2c_master(fe_slave, DIBX000_I2C_INTERFACE_TUNER, 1);
+		if (dvb_attach(dib0090_register, fe_slave, tun_i2c, &dib809x_dib0090_config) == NULL)
+			return -ENODEV;
+		fe_slave->dvb = adap->fe_adap[0].fe->dvb;
+		fe_slave->ops.tuner_ops.set_params = dib8096_set_param_override;
+	}
+	tun_i2c = dib8000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+	if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL)
+		return -ENODEV;
+
+	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096_set_param_override;
+
+	return 0;
+}
+
+static int nim8096md_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dvb_frontend *fe_slave;
+
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(1000);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	dib8000_i2c_enumeration(&adap->dev->i2c_adap, 2, 18, 0x80, 0);
+
+	adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config[0]);
+	if (adap->fe_adap[0].fe == NULL)
+		return -ENODEV;
+
+	fe_slave = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x82, &dib809x_dib8000_config[1]);
+	dib8000_set_slave_frontend(adap->fe_adap[0].fe, fe_slave);
+
+	return fe_slave == NULL ?  -ENODEV : 0;
+}
+
+/* TFE8096P */
+static struct dibx000_agc_config dib8096p_agc_config[2] = {
+	{
+		.band_caps		= BAND_UHF,
+		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
+		   P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
+		   P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+		   P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
+		   P_agc_write=0 */
+		.setup			= (0 << 15) | (0 << 14) | (5 << 11)
+			| (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5)
+			| (0 << 4) | (5 << 1) | (0 << 0),
+
+		.inv_gain		= 684,
+		.time_stabiliz	= 10,
+
+		.alpha_level	= 0,
+		.thlock			= 118,
+
+		.wbd_inv		= 0,
+		.wbd_ref		= 1200,
+		.wbd_sel		= 3,
+		.wbd_alpha		= 5,
+
+		.agc1_max		= 65535,
+		.agc1_min		= 0,
+
+		.agc2_max		= 32767,
+		.agc2_min		= 0,
+
+		.agc1_pt1		= 0,
+		.agc1_pt2		= 0,
+		.agc1_pt3		= 105,
+		.agc1_slope1	= 0,
+		.agc1_slope2	= 156,
+		.agc2_pt1		= 105,
+		.agc2_pt2		= 255,
+		.agc2_slope1	= 54,
+		.agc2_slope2	= 0,
+
+		.alpha_mant		= 28,
+		.alpha_exp		= 26,
+		.beta_mant		= 31,
+		.beta_exp		= 51,
+
+		.perform_agc_softsplit = 0,
+	} , {
+		.band_caps		= BAND_FM | BAND_VHF | BAND_CBAND,
+		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
+		   P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
+		   P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+		   P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
+		   P_agc_write=0 */
+		.setup			= (0 << 15) | (0 << 14) | (5 << 11)
+			| (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5)
+			| (0 << 4) | (5 << 1) | (0 << 0),
+
+		.inv_gain		= 732,
+		.time_stabiliz  = 10,
+
+		.alpha_level	= 0,
+		.thlock			= 118,
+
+		.wbd_inv		= 0,
+		.wbd_ref		= 1200,
+		.wbd_sel		= 3,
+		.wbd_alpha		= 5,
+
+		.agc1_max		= 65535,
+		.agc1_min		= 0,
+
+		.agc2_max		= 32767,
+		.agc2_min		= 0,
+
+		.agc1_pt1		= 0,
+		.agc1_pt2		= 0,
+		.agc1_pt3		= 98,
+		.agc1_slope1	= 0,
+		.agc1_slope2	= 167,
+		.agc2_pt1		= 98,
+		.agc2_pt2		= 255,
+		.agc2_slope1	= 52,
+		.agc2_slope2	= 0,
+
+		.alpha_mant		= 28,
+		.alpha_exp		= 26,
+		.beta_mant		= 31,
+		.beta_exp		= 51,
+
+		.perform_agc_softsplit = 0,
+	}
+};
+
+static struct dibx000_bandwidth_config dib8096p_clock_config_12_mhz = {
+	108000, 13500,
+	1, 9, 1, 0, 0,
+	0, 0, 0, 0, 2,
+	(3 << 14) | (1 << 12) | (524 << 0),
+	(0 << 25) | 0,
+	20199729,
+	12000000,
+};
+
+static struct dib8000_config tfe8096p_dib8000_config = {
+	.output_mpeg2_in_188_bytes	= 1,
+	.hostbus_diversity			= 1,
+	.update_lna					= NULL,
+
+	.agc_config_count			= 2,
+	.agc						= dib8096p_agc_config,
+	.pll						= &dib8096p_clock_config_12_mhz,
+
+	.gpio_dir					= DIB8000_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val					= DIB8000_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos				= DIB8000_GPIO_DEFAULT_PWM_POS,
+
+	.agc_control				= NULL,
+	.diversity_delay			= 48,
+	.output_mode				= OUTMODE_MPEG2_FIFO,
+	.enMpegOutput				= 1,
+};
+
+static struct dib0090_wbd_slope dib8096p_wbd_table[] = {
+	{ 380, 81, 850, 64, 540, 4},
+	{ 860, 51, 866, 21, 375, 4},
+	{1700, 0, 250, 0, 100, 6},
+	{2600, 0, 250, 0, 100, 6},
+	{ 0xFFFF, 0, 0, 0, 0, 0},
+};
+
+static const struct dib0090_config tfe8096p_dib0090_config = {
+	.io.clock_khz			= 12000,
+	.io.pll_bypass			= 0,
+	.io.pll_range			= 0,
+	.io.pll_prediv			= 3,
+	.io.pll_loopdiv			= 6,
+	.io.adc_clock_ratio		= 0,
+	.io.pll_int_loop_filt	= 0,
+	.reset					= dib8096p_tuner_sleep,
+	.sleep					= dib8096p_tuner_sleep,
+
+	.freq_offset_khz_uhf	= -143,
+	.freq_offset_khz_vhf	= -143,
+
+	.get_adc_power			= dib8090_get_adc_power,
+
+	.clkouttobamse			= 1,
+	.analog_output			= 0,
+
+	.wbd_vhf_offset			= 0,
+	.wbd_cband_offset		= 0,
+	.use_pwm_agc			= 1,
+	.clkoutdrive			= 0,
+
+	.fref_clock_ratio		= 1,
+
+	.wbd					= dib8096p_wbd_table,
+
+	.ls_cfg_pad_drv			= 0,
+	.data_tx_drv			= 0,
+	.low_if					= NULL,
+	.in_soc					= 1,
+	.force_cband_input		= 0,
+};
+
+struct dibx090p_adc {
+	u32 freq;			/* RF freq MHz */
+	u32 timf;			/* New Timf */
+	u32 pll_loopdiv;	/* New prediv */
+	u32 pll_prediv;		/* New loopdiv */
+};
+
+struct dibx090p_adc dib8090p_adc_tab[] = {
+	{ 50000, 17043521, 16, 3}, /* 64 MHz */
+	{878000, 20199729, 9, 1}, /* 60 MHz */
+	{0xffffffff, 0, 0, 0}, /* 60 MHz */
+};
+
+static int dib8096p_agc_startup(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	struct dib0700_adapter_state *state = adap->priv;
+	struct dibx000_bandwidth_config pll;
+	u16 target;
+	int better_sampling_freq = 0, ret;
+	struct dibx090p_adc *adc_table = &dib8090p_adc_tab[0];
+
+	ret = state->set_param_save(fe);
+	if (ret < 0)
+		return ret;
+	memset(&pll, 0, sizeof(struct dibx000_bandwidth_config));
+
+	dib0090_pwm_gain_reset(fe);
+	/* dib0090_get_wbd_target is returning any possible
+	   temperature compensated wbd-target */
+	target = (dib0090_get_wbd_target(fe) * 8  + 1) / 2;
+	dib8000_set_wbd_ref(fe, target);
+
+
+	while (p->frequency / 1000 > adc_table->freq) {
+		better_sampling_freq = 1;
+		adc_table++;
+	}
+
+	if ((adc_table->freq != 0xffffffff) && better_sampling_freq) {
+		pll.pll_ratio  = adc_table->pll_loopdiv;
+		pll.pll_prediv = adc_table->pll_prediv;
+		dib8000_update_pll(fe, &pll);
+		dib8000_ctrl_timf(fe, DEMOD_TIMF_SET, adc_table->timf);
+	}
+	return 0;
+}
+
+static int tfe8096p_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x80, 1);
+
+	adap->fe_adap[0].fe = dvb_attach(dib8000_attach,
+			&adap->dev->i2c_adap, 0x80, &tfe8096p_dib8000_config);
+
+	return adap->fe_adap[0].fe == NULL ?  -ENODEV : 0;
+}
+
+static int tfe8096p_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *st = adap->priv;
+	struct i2c_adapter *tun_i2c = dib8096p_get_i2c_tuner(adap->fe_adap[0].fe);
+
+	if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c,
+				&tfe8096p_dib0090_config) == NULL)
+		return -ENODEV;
+
+	dib8000_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
+
+	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096p_agc_startup;
+	return 0;
+}
+
+/* STK9090M */
+static int dib90x0_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff)
+{
+	return dib9000_fw_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
+}
+
+static int dib90x0_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
+{
+	return dib9000_fw_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
+}
+
+static int dib90x0_tuner_reset(struct dvb_frontend *fe, int onoff)
+{
+	return dib9000_set_gpio(fe, 5, 0, !onoff);
+}
+
+static int dib90x0_tuner_sleep(struct dvb_frontend *fe, int onoff)
+{
+	return dib9000_set_gpio(fe, 0, 0, onoff);
+}
+
+static int dib01x0_pmu_update(struct i2c_adapter *i2c, u16 *data, u8 len)
+{
+	u8 wb[4] = { 0xc >> 8, 0xc & 0xff, 0, 0 };
+	u8 rb[2];
+	struct i2c_msg msg[2] = {
+		{.addr = 0x1e >> 1, .flags = 0, .buf = wb, .len = 2},
+		{.addr = 0x1e >> 1, .flags = I2C_M_RD, .buf = rb, .len = 2},
+	};
+	u8 index_data;
+
+	dibx000_i2c_set_speed(i2c, 250);
+
+	if (i2c_transfer(i2c, msg, 2) != 2)
+		return -EIO;
+
+	switch (rb[0] << 8 | rb[1]) {
+	case 0:
+			deb_info("Found DiB0170 rev1: This version of DiB0170 is not supported any longer.\n");
+			return -EIO;
+	case 1:
+			deb_info("Found DiB0170 rev2");
+			break;
+	case 2:
+			deb_info("Found DiB0190 rev2");
+			break;
+	default:
+			deb_info("DiB01x0 not found");
+			return -EIO;
+	}
+
+	for (index_data = 0; index_data < len; index_data += 2) {
+		wb[2] = (data[index_data + 1] >> 8) & 0xff;
+		wb[3] = (data[index_data + 1]) & 0xff;
+
+		if (data[index_data] == 0) {
+			wb[0] = (data[index_data] >> 8) & 0xff;
+			wb[1] = (data[index_data]) & 0xff;
+			msg[0].len = 2;
+			if (i2c_transfer(i2c, msg, 2) != 2)
+				return -EIO;
+			wb[2] |= rb[0];
+			wb[3] |= rb[1] & ~(3 << 4);
+		}
+
+		wb[0] = (data[index_data] >> 8)&0xff;
+		wb[1] = (data[index_data])&0xff;
+		msg[0].len = 4;
+		if (i2c_transfer(i2c, &msg[0], 1) != 1)
+			return -EIO;
+	}
+	return 0;
+}
+
+static struct dib9000_config stk9090m_config = {
+	.output_mpeg2_in_188_bytes = 1,
+	.output_mode = OUTMODE_MPEG2_FIFO,
+	.vcxo_timer = 279620,
+	.timing_frequency = 20452225,
+	.demod_clock_khz = 60000,
+	.xtal_clock_khz = 30000,
+	.if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0),
+	.subband = {
+		2,
+		{
+			{ 240, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0008, 0x0000, 0x0008 } }, /* GPIO 3 to 1 for VHF */
+			{ 890, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0008, 0x0000, 0x0000 } }, /* GPIO 3 to 0 for UHF */
+			{ 0 },
+		},
+	},
+	.gpio_function = {
+		{ .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_ON, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = (0x10 & ~0x1) | 0x20 },
+		{ .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_OFF, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = 0 | 0x21 },
+	},
+};
+
+static struct dib9000_config nim9090md_config[2] = {
+	{
+		.output_mpeg2_in_188_bytes = 1,
+		.output_mode = OUTMODE_MPEG2_FIFO,
+		.vcxo_timer = 279620,
+		.timing_frequency = 20452225,
+		.demod_clock_khz = 60000,
+		.xtal_clock_khz = 30000,
+		.if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0),
+	}, {
+		.output_mpeg2_in_188_bytes = 1,
+		.output_mode = OUTMODE_DIVERSITY,
+		.vcxo_timer = 279620,
+		.timing_frequency = 20452225,
+		.demod_clock_khz = 60000,
+		.xtal_clock_khz = 30000,
+		.if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0),
+		.subband = {
+			2,
+			{
+				{ 240, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0006, 0x0000, 0x0006 } }, /* GPIO 1 and 2 to 1 for VHF */
+				{ 890, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0006, 0x0000, 0x0000 } }, /* GPIO 1 and 2 to 0 for UHF */
+				{ 0 },
+			},
+		},
+		.gpio_function = {
+			{ .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_ON, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = (0x10 & ~0x1) | 0x20 },
+			{ .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_OFF, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = 0 | 0x21 },
+		},
+	}
+};
+
+static struct dib0090_config dib9090_dib0090_config = {
+	.io.pll_bypass = 0,
+	.io.pll_range = 1,
+	.io.pll_prediv = 1,
+	.io.pll_loopdiv = 8,
+	.io.adc_clock_ratio = 8,
+	.io.pll_int_loop_filt = 0,
+	.io.clock_khz = 30000,
+	.reset = dib90x0_tuner_reset,
+	.sleep = dib90x0_tuner_sleep,
+	.clkouttobamse = 0,
+	.analog_output = 0,
+	.use_pwm_agc = 0,
+	.clkoutdrive = 0,
+	.freq_offset_khz_uhf = 0,
+	.freq_offset_khz_vhf = 0,
+};
+
+static struct dib0090_config nim9090md_dib0090_config[2] = {
+	{
+		.io.pll_bypass = 0,
+		.io.pll_range = 1,
+		.io.pll_prediv = 1,
+		.io.pll_loopdiv = 8,
+		.io.adc_clock_ratio = 8,
+		.io.pll_int_loop_filt = 0,
+		.io.clock_khz = 30000,
+		.reset = dib90x0_tuner_reset,
+		.sleep = dib90x0_tuner_sleep,
+		.clkouttobamse = 1,
+		.analog_output = 0,
+		.use_pwm_agc = 0,
+		.clkoutdrive = 0,
+		.freq_offset_khz_uhf = 0,
+		.freq_offset_khz_vhf = 0,
+	}, {
+		.io.pll_bypass = 0,
+		.io.pll_range = 1,
+		.io.pll_prediv = 1,
+		.io.pll_loopdiv = 8,
+		.io.adc_clock_ratio = 8,
+		.io.pll_int_loop_filt = 0,
+		.io.clock_khz = 30000,
+		.reset = dib90x0_tuner_reset,
+		.sleep = dib90x0_tuner_sleep,
+		.clkouttobamse = 0,
+		.analog_output = 0,
+		.use_pwm_agc = 0,
+		.clkoutdrive = 0,
+		.freq_offset_khz_uhf = 0,
+		.freq_offset_khz_vhf = 0,
+	}
+};
+
+
+static int stk9090m_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *state = adap->priv;
+	struct dib0700_state *st = adap->dev->priv;
+	u32 fw_version;
+
+	/* Make use of the new i2c functions from FW 1.20 */
+	dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL);
+	if (fw_version >= 0x10200)
+		st->fw_use_new_i2c_api = 1;
+	dib0700_set_i2c_speed(adap->dev, 340);
+
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	dib9000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x80);
+
+	if (request_firmware(&state->frontend_firmware, "dib9090.fw", &adap->dev->udev->dev)) {
+		deb_info("%s: Upload failed. (file not found?)\n", __func__);
+		return -ENODEV;
+	} else {
+		deb_info("%s: firmware read %Zu bytes.\n", __func__, state->frontend_firmware->size);
+	}
+	stk9090m_config.microcode_B_fe_size = state->frontend_firmware->size;
+	stk9090m_config.microcode_B_fe_buffer = state->frontend_firmware->data;
+
+	adap->fe_adap[0].fe = dvb_attach(dib9000_attach, &adap->dev->i2c_adap, 0x80, &stk9090m_config);
+
+	return adap->fe_adap[0].fe == NULL ?  -ENODEV : 0;
+}
+
+static int dib9090_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *state = adap->priv;
+	struct i2c_adapter *i2c = dib9000_get_tuner_interface(adap->fe_adap[0].fe);
+	u16 data_dib190[10] = {
+		1, 0x1374,
+		2, 0x01a2,
+		7, 0x0020,
+		0, 0x00ef,
+		8, 0x0486,
+	};
+
+	if (dvb_attach(dib0090_fw_register, adap->fe_adap[0].fe, i2c, &dib9090_dib0090_config) == NULL)
+		return -ENODEV;
+	i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0);
+	if (dib01x0_pmu_update(i2c, data_dib190, 10) != 0)
+		return -ENODEV;
+	dib0700_set_i2c_speed(adap->dev, 1500);
+	if (dib9000_firmware_post_pll_init(adap->fe_adap[0].fe) < 0)
+		return -ENODEV;
+	release_firmware(state->frontend_firmware);
+	return 0;
+}
+
+static int nim9090md_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *state = adap->priv;
+	struct dib0700_state *st = adap->dev->priv;
+	struct i2c_adapter *i2c;
+	struct dvb_frontend *fe_slave;
+	u32 fw_version;
+
+	/* Make use of the new i2c functions from FW 1.20 */
+	dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL);
+	if (fw_version >= 0x10200)
+		st->fw_use_new_i2c_api = 1;
+	dib0700_set_i2c_speed(adap->dev, 340);
+
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	if (request_firmware(&state->frontend_firmware, "dib9090.fw", &adap->dev->udev->dev)) {
+		deb_info("%s: Upload failed. (file not found?)\n", __func__);
+		return -EIO;
+	} else {
+		deb_info("%s: firmware read %Zu bytes.\n", __func__, state->frontend_firmware->size);
+	}
+	nim9090md_config[0].microcode_B_fe_size = state->frontend_firmware->size;
+	nim9090md_config[0].microcode_B_fe_buffer = state->frontend_firmware->data;
+	nim9090md_config[1].microcode_B_fe_size = state->frontend_firmware->size;
+	nim9090md_config[1].microcode_B_fe_buffer = state->frontend_firmware->data;
+
+	dib9000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, 0x80);
+	adap->fe_adap[0].fe = dvb_attach(dib9000_attach, &adap->dev->i2c_adap, 0x80, &nim9090md_config[0]);
+
+	if (adap->fe_adap[0].fe == NULL)
+		return -ENODEV;
+
+	i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_3_4, 0);
+	dib9000_i2c_enumeration(i2c, 1, 0x12, 0x82);
+
+	fe_slave = dvb_attach(dib9000_attach, i2c, 0x82, &nim9090md_config[1]);
+	dib9000_set_slave_frontend(adap->fe_adap[0].fe, fe_slave);
+
+	return fe_slave == NULL ?  -ENODEV : 0;
+}
+
+static int nim9090md_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *state = adap->priv;
+	struct i2c_adapter *i2c;
+	struct dvb_frontend *fe_slave;
+	u16 data_dib190[10] = {
+		1, 0x5374,
+		2, 0x01ae,
+		7, 0x0020,
+		0, 0x00ef,
+		8, 0x0406,
+	};
+	i2c = dib9000_get_tuner_interface(adap->fe_adap[0].fe);
+	if (dvb_attach(dib0090_fw_register, adap->fe_adap[0].fe, i2c, &nim9090md_dib0090_config[0]) == NULL)
+		return -ENODEV;
+	i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0);
+	if (dib01x0_pmu_update(i2c, data_dib190, 10) < 0)
+		return -ENODEV;
+
+	dib0700_set_i2c_speed(adap->dev, 1500);
+	if (dib9000_firmware_post_pll_init(adap->fe_adap[0].fe) < 0)
+		return -ENODEV;
+
+	fe_slave = dib9000_get_slave_frontend(adap->fe_adap[0].fe, 1);
+	if (fe_slave != NULL) {
+		i2c = dib9000_get_component_bus_interface(adap->fe_adap[0].fe);
+		dib9000_set_i2c_adapter(fe_slave, i2c);
+
+		i2c = dib9000_get_tuner_interface(fe_slave);
+		if (dvb_attach(dib0090_fw_register, fe_slave, i2c, &nim9090md_dib0090_config[1]) == NULL)
+			return -ENODEV;
+		fe_slave->dvb = adap->fe_adap[0].fe->dvb;
+		dib9000_fw_set_component_bus_speed(adap->fe_adap[0].fe, 1500);
+		if (dib9000_firmware_post_pll_init(fe_slave) < 0)
+			return -ENODEV;
+	}
+	release_firmware(state->frontend_firmware);
+
+	return 0;
+}
+
+/* NIM7090 */
+struct dib7090p_best_adc {
+	u32 timf;
+	u32 pll_loopdiv;
+	u32 pll_prediv;
+};
+
+static int dib7090p_get_best_sampling(struct dvb_frontend *fe , struct dib7090p_best_adc *adc)
+{
+	u8 spur = 0, prediv = 0, loopdiv = 0, min_prediv = 1, max_prediv = 1;
+
+	u16 xtal = 12000;
+	u32 fcp_min = 1900;  /* PLL Minimum Frequency comparator KHz */
+	u32 fcp_max = 20000; /* PLL Maximum Frequency comparator KHz */
+	u32 fdem_max = 76000;
+	u32 fdem_min = 69500;
+	u32 fcp = 0, fs = 0, fdem = 0;
+	u32 harmonic_id = 0;
+
+	adc->pll_loopdiv = loopdiv;
+	adc->pll_prediv = prediv;
+	adc->timf = 0;
+
+	deb_info("bandwidth = %d fdem_min =%d", fe->dtv_property_cache.bandwidth_hz, fdem_min);
+
+	/* Find Min and Max prediv */
+	while ((xtal/max_prediv) >= fcp_min)
+		max_prediv++;
+
+	max_prediv--;
+	min_prediv = max_prediv;
+	while ((xtal/min_prediv) <= fcp_max) {
+		min_prediv--;
+		if (min_prediv == 1)
+			break;
+	}
+	deb_info("MIN prediv = %d : MAX prediv = %d", min_prediv, max_prediv);
+
+	min_prediv = 2;
+
+	for (prediv = min_prediv ; prediv < max_prediv; prediv++) {
+		fcp = xtal / prediv;
+		if (fcp > fcp_min && fcp < fcp_max) {
+			for (loopdiv = 1 ; loopdiv < 64 ; loopdiv++) {
+				fdem = ((xtal/prediv) * loopdiv);
+				fs   = fdem / 4;
+				/* test min/max system restrictions */
+
+				if ((fdem >= fdem_min) && (fdem <= fdem_max) && (fs >= fe->dtv_property_cache.bandwidth_hz/1000)) {
+					spur = 0;
+					/* test fs harmonics positions */
+					for (harmonic_id = (fe->dtv_property_cache.frequency / (1000*fs)) ;  harmonic_id <= ((fe->dtv_property_cache.frequency / (1000*fs))+1) ; harmonic_id++) {
+						if (((fs*harmonic_id) >= ((fe->dtv_property_cache.frequency/1000) - (fe->dtv_property_cache.bandwidth_hz/2000))) &&  ((fs*harmonic_id) <= ((fe->dtv_property_cache.frequency/1000) + (fe->dtv_property_cache.bandwidth_hz/2000)))) {
+							spur = 1;
+							break;
+						}
+					}
+
+					if (!spur) {
+						adc->pll_loopdiv = loopdiv;
+						adc->pll_prediv = prediv;
+						adc->timf = 2396745143UL/fdem*(1 << 9);
+						adc->timf += ((2396745143UL%fdem) << 9)/fdem;
+						deb_info("loopdiv=%i prediv=%i timf=%i", loopdiv, prediv, adc->timf);
+						break;
+					}
+				}
+			}
+		}
+		if (!spur)
+			break;
+	}
+
+
+	if (adc->pll_loopdiv == 0 && adc->pll_prediv == 0)
+		return -EINVAL;
+	else
+		return 0;
+}
+
+static int dib7090_agc_startup(struct dvb_frontend *fe)
+{
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	struct dib0700_adapter_state *state = adap->priv;
+	struct dibx000_bandwidth_config pll;
+	u16 target;
+	struct dib7090p_best_adc adc;
+	int ret;
+
+	ret = state->set_param_save(fe);
+	if (ret < 0)
+		return ret;
+
+	memset(&pll, 0, sizeof(struct dibx000_bandwidth_config));
+	dib0090_pwm_gain_reset(fe);
+	target = (dib0090_get_wbd_target(fe) * 8 + 1) / 2;
+	dib7000p_set_wbd_ref(fe, target);
+
+	if (dib7090p_get_best_sampling(fe, &adc) == 0) {
+		pll.pll_ratio  = adc.pll_loopdiv;
+		pll.pll_prediv = adc.pll_prediv;
+
+		dib7000p_update_pll(fe, &pll);
+		dib7000p_ctrl_timf(fe, DEMOD_TIMF_SET, adc.timf);
+	}
+	return 0;
+}
+
+static int dib7090_agc_restart(struct dvb_frontend *fe, u8 restart)
+{
+	deb_info("AGC restart callback: %d", restart);
+	if (restart == 0) /* before AGC startup */
+		dib0090_set_dc_servo(fe, 1);
+	return 0;
+}
+
+static int dib7090e_update_lna(struct dvb_frontend *fe, u16 agc_global)
+{
+	u16 agc1 = 0, agc2, wbd = 0, wbd_target, wbd_offset, threshold_agc1;
+	s16 wbd_delta;
+
+	if ((fe->dtv_property_cache.frequency) < 400000000)
+		threshold_agc1 = 25000;
+	else
+		threshold_agc1 = 30000;
+
+	wbd_target = (dib0090_get_wbd_target(fe)*8+1)/2;
+	wbd_offset = dib0090_get_wbd_offset(fe);
+	dib7000p_get_agc_values(fe, NULL, &agc1, &agc2, &wbd);
+	wbd_delta = (s16)wbd - (((s16)wbd_offset+10)*4) ;
+
+	deb_info("update lna, agc_global=%d agc1=%d agc2=%d",
+			agc_global, agc1, agc2);
+	deb_info("update lna, wbd=%d wbd target=%d wbd offset=%d wbd delta=%d",
+			wbd, wbd_target, wbd_offset, wbd_delta);
+
+	if ((agc1 < threshold_agc1) && (wbd_delta > 0)) {
+		dib0090_set_switch(fe, 1, 1, 1);
+		dib0090_set_vga(fe, 0);
+		dib0090_update_rframp_7090(fe, 0);
+		dib0090_update_tuning_table_7090(fe, 0);
+	} else {
+		dib0090_set_vga(fe, 1);
+		dib0090_update_rframp_7090(fe, 1);
+		dib0090_update_tuning_table_7090(fe, 1);
+		dib0090_set_switch(fe, 0, 0, 0);
+	}
+
+	return 0;
+}
+
+static struct dib0090_wbd_slope dib7090_wbd_table[] = {
+	{ 380,   81, 850, 64, 540,  4},
+	{ 860,   51, 866, 21,  375, 4},
+	{1700,    0, 250, 0,   100, 6},
+	{2600,    0, 250, 0,   100, 6},
+	{ 0xFFFF, 0,   0, 0,   0,   0},
+};
+
+static struct dib0090_wbd_slope dib7090e_wbd_table[] = {
+	{ 380,   81, 850, 64, 540,	4},
+	{ 700,   51, 866, 21,  320,	4},
+	{ 860,   48, 666, 18,  330,	6},
+	{1700,    0, 250, 0,   100, 6},
+	{2600,    0, 250, 0,   100, 6},
+	{ 0xFFFF, 0,   0, 0,   0,	0},
+};
+
+static struct dibx000_agc_config dib7090_agc_config[2] = {
+	{
+		.band_caps      = BAND_UHF,
+		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
+		* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
+		.setup          = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
+
+		.inv_gain       = 687,
+		.time_stabiliz  = 10,
+
+		.alpha_level    = 0,
+		.thlock         = 118,
+
+		.wbd_inv        = 0,
+		.wbd_ref        = 1200,
+		.wbd_sel        = 3,
+		.wbd_alpha      = 5,
+
+		.agc1_max       = 65535,
+		.agc1_min       = 0,
+
+		.agc2_max       = 65535,
+		.agc2_min       = 0,
+
+		.agc1_pt1       = 0,
+		.agc1_pt2       = 32,
+		.agc1_pt3       = 114,
+		.agc1_slope1    = 143,
+		.agc1_slope2    = 144,
+		.agc2_pt1       = 114,
+		.agc2_pt2       = 227,
+		.agc2_slope1    = 116,
+		.agc2_slope2    = 117,
+
+		.alpha_mant     = 18,
+		.alpha_exp      = 0,
+		.beta_mant      = 20,
+		.beta_exp       = 59,
+
+		.perform_agc_softsplit = 0,
+	} , {
+		.band_caps      = BAND_FM | BAND_VHF | BAND_CBAND,
+		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
+		* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
+		.setup          = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
+
+		.inv_gain       = 732,
+		.time_stabiliz  = 10,
+
+		.alpha_level    = 0,
+		.thlock         = 118,
+
+		.wbd_inv        = 0,
+		.wbd_ref        = 1200,
+		.wbd_sel        = 3,
+		.wbd_alpha      = 5,
+
+		.agc1_max       = 65535,
+		.agc1_min       = 0,
+
+		.agc2_max       = 65535,
+		.agc2_min       = 0,
+
+		.agc1_pt1       = 0,
+		.agc1_pt2       = 0,
+		.agc1_pt3       = 98,
+		.agc1_slope1    = 0,
+		.agc1_slope2    = 167,
+		.agc2_pt1       = 98,
+		.agc2_pt2       = 255,
+		.agc2_slope1    = 104,
+		.agc2_slope2    = 0,
+
+		.alpha_mant     = 18,
+		.alpha_exp      = 0,
+		.beta_mant      = 20,
+		.beta_exp       = 59,
+
+		.perform_agc_softsplit = 0,
+	}
+};
+
+static struct dibx000_bandwidth_config dib7090_clock_config_12_mhz = {
+	60000, 15000,
+	1, 5, 0, 0, 0,
+	0, 0, 1, 1, 2,
+	(3 << 14) | (1 << 12) | (524 << 0),
+	(0 << 25) | 0,
+	20452225,
+	15000000,
+};
+
+static struct dib7000p_config nim7090_dib7000p_config = {
+	.output_mpeg2_in_188_bytes  = 1,
+	.hostbus_diversity			= 1,
+	.tuner_is_baseband			= 1,
+	.update_lna					= NULL,
+
+	.agc_config_count			= 2,
+	.agc						= dib7090_agc_config,
+
+	.bw							= &dib7090_clock_config_12_mhz,
+
+	.gpio_dir					= DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val					= DIB7000P_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos				= DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+	.pwm_freq_div				= 0,
+
+	.agc_control				= dib7090_agc_restart,
+
+	.spur_protect				= 0,
+	.disable_sample_and_hold	= 0,
+	.enable_current_mirror		= 0,
+	.diversity_delay			= 0,
+
+	.output_mode				= OUTMODE_MPEG2_FIFO,
+	.enMpegOutput				= 1,
+};
+
+static struct dib7000p_config tfe7090pvr_dib7000p_config[2] = {
+	{
+		.output_mpeg2_in_188_bytes  = 1,
+		.hostbus_diversity			= 1,
+		.tuner_is_baseband			= 1,
+		.update_lna					= NULL,
+
+		.agc_config_count			= 2,
+		.agc						= dib7090_agc_config,
+
+		.bw							= &dib7090_clock_config_12_mhz,
+
+		.gpio_dir					= DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+		.gpio_val					= DIB7000P_GPIO_DEFAULT_VALUES,
+		.gpio_pwm_pos				= DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+		.pwm_freq_div				= 0,
+
+		.agc_control				= dib7090_agc_restart,
+
+		.spur_protect				= 0,
+		.disable_sample_and_hold	= 0,
+		.enable_current_mirror		= 0,
+		.diversity_delay			= 0,
+
+		.output_mode				= OUTMODE_MPEG2_PAR_GATED_CLK,
+		.default_i2c_addr			= 0x90,
+		.enMpegOutput				= 1,
+	}, {
+		.output_mpeg2_in_188_bytes  = 1,
+		.hostbus_diversity			= 1,
+		.tuner_is_baseband			= 1,
+		.update_lna					= NULL,
+
+		.agc_config_count			= 2,
+		.agc						= dib7090_agc_config,
+
+		.bw							= &dib7090_clock_config_12_mhz,
+
+		.gpio_dir					= DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+		.gpio_val					= DIB7000P_GPIO_DEFAULT_VALUES,
+		.gpio_pwm_pos				= DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+		.pwm_freq_div				= 0,
+
+		.agc_control				= dib7090_agc_restart,
+
+		.spur_protect				= 0,
+		.disable_sample_and_hold	= 0,
+		.enable_current_mirror		= 0,
+		.diversity_delay			= 0,
+
+		.output_mode				= OUTMODE_MPEG2_PAR_GATED_CLK,
+		.default_i2c_addr			= 0x92,
+		.enMpegOutput				= 0,
+	}
+};
+
+static struct dib7000p_config tfe7090e_dib7000p_config = {
+	.output_mpeg2_in_188_bytes  = 1,
+	.hostbus_diversity			= 1,
+	.tuner_is_baseband			= 1,
+	.update_lna					= dib7090e_update_lna,
+
+	.agc_config_count			= 2,
+	.agc						= dib7090_agc_config,
+
+	.bw							= &dib7090_clock_config_12_mhz,
+
+	.gpio_dir					= DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val					= DIB7000P_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos				= DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+	.pwm_freq_div				= 0,
+
+	.agc_control				= dib7090_agc_restart,
+
+	.spur_protect				= 0,
+	.disable_sample_and_hold	= 0,
+	.enable_current_mirror		= 0,
+	.diversity_delay			= 0,
+
+	.output_mode				= OUTMODE_MPEG2_FIFO,
+	.enMpegOutput				= 1,
+};
+
+static const struct dib0090_config nim7090_dib0090_config = {
+	.io.clock_khz = 12000,
+	.io.pll_bypass = 0,
+	.io.pll_range = 0,
+	.io.pll_prediv = 3,
+	.io.pll_loopdiv = 6,
+	.io.adc_clock_ratio = 0,
+	.io.pll_int_loop_filt = 0,
+	.reset = dib7090_tuner_sleep,
+	.sleep = dib7090_tuner_sleep,
+
+	.freq_offset_khz_uhf = 0,
+	.freq_offset_khz_vhf = 0,
+
+	.get_adc_power = dib7090_get_adc_power,
+
+	.clkouttobamse = 1,
+	.analog_output = 0,
+
+	.wbd_vhf_offset = 0,
+	.wbd_cband_offset = 0,
+	.use_pwm_agc = 1,
+	.clkoutdrive = 0,
+
+	.fref_clock_ratio = 0,
+
+	.wbd = dib7090_wbd_table,
+
+	.ls_cfg_pad_drv = 0,
+	.data_tx_drv = 0,
+	.low_if = NULL,
+	.in_soc = 1,
+};
+
+static const struct dib0090_config tfe7090e_dib0090_config = {
+	.io.clock_khz = 12000,
+	.io.pll_bypass = 0,
+	.io.pll_range = 0,
+	.io.pll_prediv = 3,
+	.io.pll_loopdiv = 6,
+	.io.adc_clock_ratio = 0,
+	.io.pll_int_loop_filt = 0,
+	.reset = dib7090_tuner_sleep,
+	.sleep = dib7090_tuner_sleep,
+
+	.freq_offset_khz_uhf = 0,
+	.freq_offset_khz_vhf = 0,
+
+	.get_adc_power = dib7090_get_adc_power,
+
+	.clkouttobamse = 1,
+	.analog_output = 0,
+
+	.wbd_vhf_offset = 0,
+	.wbd_cband_offset = 0,
+	.use_pwm_agc = 1,
+	.clkoutdrive = 0,
+
+	.fref_clock_ratio = 0,
+
+	.wbd = dib7090e_wbd_table,
+
+	.ls_cfg_pad_drv = 0,
+	.data_tx_drv = 0,
+	.low_if = NULL,
+	.in_soc = 1,
+	.force_cband_input = 1,
+	.is_dib7090e = 1,
+};
+
+static struct dib7000p_config tfe7790e_dib7000p_config = {
+	.output_mpeg2_in_188_bytes  = 1,
+	.hostbus_diversity			= 1,
+	.tuner_is_baseband			= 1,
+	.update_lna					= dib7090e_update_lna,
+
+	.agc_config_count			= 2,
+	.agc						= dib7090_agc_config,
+
+	.bw							= &dib7090_clock_config_12_mhz,
+
+	.gpio_dir					= DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val					= DIB7000P_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos				= DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+	.pwm_freq_div				= 0,
+
+	.agc_control				= dib7090_agc_restart,
+
+	.spur_protect				= 0,
+	.disable_sample_and_hold	= 0,
+	.enable_current_mirror		= 0,
+	.diversity_delay			= 0,
+
+	.output_mode				= OUTMODE_MPEG2_PAR_GATED_CLK,
+	.enMpegOutput				= 1,
+};
+
+static const struct dib0090_config tfe7790e_dib0090_config = {
+	.io.clock_khz = 12000,
+	.io.pll_bypass = 0,
+	.io.pll_range = 0,
+	.io.pll_prediv = 3,
+	.io.pll_loopdiv = 6,
+	.io.adc_clock_ratio = 0,
+	.io.pll_int_loop_filt = 0,
+	.reset = dib7090_tuner_sleep,
+	.sleep = dib7090_tuner_sleep,
+
+	.freq_offset_khz_uhf = 0,
+	.freq_offset_khz_vhf = 0,
+
+	.get_adc_power = dib7090_get_adc_power,
+
+	.clkouttobamse = 1,
+	.analog_output = 0,
+
+	.wbd_vhf_offset = 0,
+	.wbd_cband_offset = 0,
+	.use_pwm_agc = 1,
+	.clkoutdrive = 0,
+
+	.fref_clock_ratio = 0,
+
+	.wbd = dib7090e_wbd_table,
+
+	.ls_cfg_pad_drv = 0,
+	.data_tx_drv = 0,
+	.low_if = NULL,
+	.in_soc = 1,
+	.force_cband_input = 1,
+	.is_dib7090e = 1,
+	.force_crystal_mode = 1,
+};
+
+static const struct dib0090_config tfe7090pvr_dib0090_config[2] = {
+	{
+		.io.clock_khz = 12000,
+		.io.pll_bypass = 0,
+		.io.pll_range = 0,
+		.io.pll_prediv = 3,
+		.io.pll_loopdiv = 6,
+		.io.adc_clock_ratio = 0,
+		.io.pll_int_loop_filt = 0,
+		.reset = dib7090_tuner_sleep,
+		.sleep = dib7090_tuner_sleep,
+
+		.freq_offset_khz_uhf = 50,
+		.freq_offset_khz_vhf = 70,
+
+		.get_adc_power = dib7090_get_adc_power,
+
+		.clkouttobamse = 1,
+		.analog_output = 0,
+
+		.wbd_vhf_offset = 0,
+		.wbd_cband_offset = 0,
+		.use_pwm_agc = 1,
+		.clkoutdrive = 0,
+
+		.fref_clock_ratio = 0,
+
+		.wbd = dib7090_wbd_table,
+
+		.ls_cfg_pad_drv = 0,
+		.data_tx_drv = 0,
+		.low_if = NULL,
+		.in_soc = 1,
+	}, {
+		.io.clock_khz = 12000,
+		.io.pll_bypass = 0,
+		.io.pll_range = 0,
+		.io.pll_prediv = 3,
+		.io.pll_loopdiv = 6,
+		.io.adc_clock_ratio = 0,
+		.io.pll_int_loop_filt = 0,
+		.reset = dib7090_tuner_sleep,
+		.sleep = dib7090_tuner_sleep,
+
+		.freq_offset_khz_uhf = -50,
+		.freq_offset_khz_vhf = -70,
+
+		.get_adc_power = dib7090_get_adc_power,
+
+		.clkouttobamse = 1,
+		.analog_output = 0,
+
+		.wbd_vhf_offset = 0,
+		.wbd_cband_offset = 0,
+		.use_pwm_agc = 1,
+		.clkoutdrive = 0,
+
+		.fref_clock_ratio = 0,
+
+		.wbd = dib7090_wbd_table,
+
+		.ls_cfg_pad_drv = 0,
+		.data_tx_drv = 0,
+		.low_if = NULL,
+		.in_soc = 1,
+	}
+};
+
+static int nim7090_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, &nim7090_dib7000p_config) != 0) {
+		err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n", __func__);
+		return -ENODEV;
+	}
+	adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, &nim7090_dib7000p_config);
+
+	return adap->fe_adap[0].fe == NULL ?  -ENODEV : 0;
+}
+
+static int nim7090_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *st = adap->priv;
+	struct i2c_adapter *tun_i2c = dib7090_get_i2c_tuner(adap->fe_adap[0].fe);
+
+	if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &nim7090_dib0090_config) == NULL)
+		return -ENODEV;
+
+	dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
+
+	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
+	return 0;
+}
+
+static int tfe7090pvr_frontend0_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_state *st = adap->dev->priv;
+
+	/* The TFE7090 requires the dib0700 to not be in master mode */
+	st->disable_streaming_master_mode = 1;
+
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	/* initialize IC 0 */
+	if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, &tfe7090pvr_dib7000p_config[0]) != 0) {
+		err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n", __func__);
+		return -ENODEV;
+	}
+
+	dib0700_set_i2c_speed(adap->dev, 340);
+	adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x90, &tfe7090pvr_dib7000p_config[0]);
+	if (adap->fe_adap[0].fe == NULL)
+		return -ENODEV;
+
+	dib7090_slave_reset(adap->fe_adap[0].fe);
+
+	return 0;
+}
+
+static int tfe7090pvr_frontend1_attach(struct dvb_usb_adapter *adap)
+{
+	struct i2c_adapter *i2c;
+
+	if (adap->dev->adapter[0].fe_adap[0].fe == NULL) {
+		err("the master dib7090 has to be initialized first");
+		return -ENODEV; /* the master device has not been initialized */
+	}
+
+	i2c = dib7000p_get_i2c_master(adap->dev->adapter[0].fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_6_7, 1);
+	if (dib7000p_i2c_enumeration(i2c, 1, 0x10, &tfe7090pvr_dib7000p_config[1]) != 0) {
+		err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n", __func__);
+		return -ENODEV;
+	}
+
+	adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, i2c, 0x92, &tfe7090pvr_dib7000p_config[1]);
+	dib0700_set_i2c_speed(adap->dev, 200);
+
+	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int tfe7090pvr_tuner0_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *st = adap->priv;
+	struct i2c_adapter *tun_i2c = dib7090_get_i2c_tuner(adap->fe_adap[0].fe);
+
+	if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &tfe7090pvr_dib0090_config[0]) == NULL)
+		return -ENODEV;
+
+	dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
+
+	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
+	return 0;
+}
+
+static int tfe7090pvr_tuner1_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *st = adap->priv;
+	struct i2c_adapter *tun_i2c = dib7090_get_i2c_tuner(adap->fe_adap[0].fe);
+
+	if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &tfe7090pvr_dib0090_config[1]) == NULL)
+		return -ENODEV;
+
+	dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
+
+	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
+	return 0;
+}
+
+static int tfe7090e_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap,
+				1, 0x10, &tfe7090e_dib7000p_config) != 0) {
+		err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n",
+				__func__);
+		return -ENODEV;
+	}
+	adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,
+			0x80, &tfe7090e_dib7000p_config);
+
+	return adap->fe_adap[0].fe == NULL ?  -ENODEV : 0;
+}
+
+static int tfe7790e_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_state *st = adap->dev->priv;
+
+	/* The TFE7790E requires the dib0700 to not be in master mode */
+	st->disable_streaming_master_mode = 1;
+
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+	msleep(20);
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap,
+				1, 0x10, &tfe7790e_dib7000p_config) != 0) {
+		err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n",
+				__func__);
+		return -ENODEV;
+	}
+	adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,
+			0x80, &tfe7790e_dib7000p_config);
+
+	return adap->fe_adap[0].fe == NULL ?  -ENODEV : 0;
+}
+
+static int tfe7790e_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *st = adap->priv;
+	struct i2c_adapter *tun_i2c =
+		dib7090_get_i2c_tuner(adap->fe_adap[0].fe);
+
+	if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c,
+				&tfe7790e_dib0090_config) == NULL)
+		return -ENODEV;
+
+	dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
+
+	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
+	return 0;
+}
+
+static int tfe7090e_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *st = adap->priv;
+	struct i2c_adapter *tun_i2c =
+		dib7090_get_i2c_tuner(adap->fe_adap[0].fe);
+
+	if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c,
+				&tfe7090e_dib0090_config) == NULL)
+		return -ENODEV;
+
+	dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
+
+	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
+	return 0;
+}
+
+/* STK7070PD */
+static struct dib7000p_config stk7070pd_dib7000p_config[2] = {
+	{
+		.output_mpeg2_in_188_bytes = 1,
+
+		.agc_config_count = 1,
+		.agc = &dib7070_agc_config,
+		.bw  = &dib7070_bw_config_12_mhz,
+		.tuner_is_baseband = 1,
+		.spur_protect = 1,
+
+		.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+		.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+		.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+		.hostbus_diversity = 1,
+	}, {
+		.output_mpeg2_in_188_bytes = 1,
+
+		.agc_config_count = 1,
+		.agc = &dib7070_agc_config,
+		.bw  = &dib7070_bw_config_12_mhz,
+		.tuner_is_baseband = 1,
+		.spur_protect = 1,
+
+		.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+		.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+		.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+		.hostbus_diversity = 1,
+	}
+};
+
+static void stk7070pd_init(struct dvb_usb_device *dev)
+{
+	dib0700_set_gpio(dev, GPIO6, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(dev, GPIO7, GPIO_OUT, 1);
+	dib0700_set_gpio(dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(dev, 72, 1);
+
+	msleep(10);
+	dib0700_set_gpio(dev, GPIO10, GPIO_OUT, 1);
+}
+
+static int stk7070pd_frontend_attach0(struct dvb_usb_adapter *adap)
+{
+	stk7070pd_init(adap->dev);
+
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 2, 18,
+				     stk7070pd_dib7000p_config) != 0) {
+		err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n",
+		    __func__);
+		return -ENODEV;
+	}
+
+	adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, &stk7070pd_dib7000p_config[0]);
+	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int stk7070pd_frontend_attach1(struct dvb_usb_adapter *adap)
+{
+	adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x82, &stk7070pd_dib7000p_config[1]);
+	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int novatd_read_status_override(struct dvb_frontend *fe,
+		fe_status_t *stat)
+{
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	struct dvb_usb_device *dev = adap->dev;
+	struct dib0700_state *state = dev->priv;
+	int ret;
+
+	ret = state->read_status(fe, stat);
+
+	if (!ret)
+		dib0700_set_gpio(dev, adap->id == 0 ? GPIO1 : GPIO0, GPIO_OUT,
+				!!(*stat & FE_HAS_LOCK));
+
+	return ret;
+}
+
+static int novatd_sleep_override(struct dvb_frontend* fe)
+{
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	struct dvb_usb_device *dev = adap->dev;
+	struct dib0700_state *state = dev->priv;
+
+	/* turn off LED */
+	dib0700_set_gpio(dev, adap->id == 0 ? GPIO1 : GPIO0, GPIO_OUT, 0);
+
+	return state->sleep(fe);
+}
+
+/**
+ * novatd_frontend_attach - Nova-TD specific attach
+ *
+ * Nova-TD has GPIO0, 1 and 2 for LEDs. So do not fiddle with them except for
+ * information purposes.
+ */
+static int novatd_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dvb_usb_device *dev = adap->dev;
+	struct dib0700_state *st = dev->priv;
+
+	if (adap->id == 0) {
+		stk7070pd_init(dev);
+
+		/* turn the power LED on, the other two off (just in case) */
+		dib0700_set_gpio(dev, GPIO0, GPIO_OUT, 0);
+		dib0700_set_gpio(dev, GPIO1, GPIO_OUT, 0);
+		dib0700_set_gpio(dev, GPIO2, GPIO_OUT, 1);
+
+		if (dib7000p_i2c_enumeration(&dev->i2c_adap, 2, 18,
+					     stk7070pd_dib7000p_config) != 0) {
+			err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n",
+			    __func__);
+			return -ENODEV;
+		}
+	}
+
+	adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &dev->i2c_adap,
+			adap->id == 0 ? 0x80 : 0x82,
+			&stk7070pd_dib7000p_config[adap->id]);
+
+	if (adap->fe_adap[0].fe == NULL)
+		return -ENODEV;
+
+	st->read_status = adap->fe_adap[0].fe->ops.read_status;
+	adap->fe_adap[0].fe->ops.read_status = novatd_read_status_override;
+	st->sleep = adap->fe_adap[0].fe->ops.sleep;
+	adap->fe_adap[0].fe->ops.sleep = novatd_sleep_override;
+
+	return 0;
+}
+
+/* S5H1411 */
+static struct s5h1411_config pinnacle_801e_config = {
+	.output_mode   = S5H1411_PARALLEL_OUTPUT,
+	.gpio          = S5H1411_GPIO_OFF,
+	.mpeg_timing   = S5H1411_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK,
+	.qam_if        = S5H1411_IF_44000,
+	.vsb_if        = S5H1411_IF_44000,
+	.inversion     = S5H1411_INVERSION_OFF,
+	.status_mode   = S5H1411_DEMODLOCKING
+};
+
+/* Pinnacle PCTV HD Pro 801e GPIOs map:
+   GPIO0  - currently unknown
+   GPIO1  - xc5000 tuner reset
+   GPIO2  - CX25843 sleep
+   GPIO3  - currently unknown
+   GPIO4  - currently unknown
+   GPIO6  - currently unknown
+   GPIO7  - currently unknown
+   GPIO9  - currently unknown
+   GPIO10 - CX25843 reset
+ */
+static int s5h1411_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_state *st = adap->dev->priv;
+
+	/* Make use of the new i2c functions from FW 1.20 */
+	st->fw_use_new_i2c_api = 1;
+
+	/* The s5h1411 requires the dib0700 to not be in master mode */
+	st->disable_streaming_master_mode = 1;
+
+	/* All msleep values taken from Windows USB trace */
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0);
+	dib0700_set_gpio(adap->dev, GPIO3, GPIO_OUT, 0);
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(400);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+	msleep(60);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(30);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 0);
+	msleep(30);
+
+	/* Put the CX25843 to sleep for now since we're in digital mode */
+	dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1);
+
+	/* GPIOs are initialized, do the attach */
+	adap->fe_adap[0].fe = dvb_attach(s5h1411_attach, &pinnacle_801e_config,
+			      &adap->dev->i2c_adap);
+	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int dib0700_xc5000_tuner_callback(void *priv, int component,
+					 int command, int arg)
+{
+	struct dvb_usb_adapter *adap = priv;
+
+	if (command == XC5000_TUNER_RESET) {
+		/* Reset the tuner */
+		dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 0);
+		msleep(10);
+		dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 1);
+		msleep(10);
+	} else {
+		err("xc5000: unknown tuner callback command: %d\n", command);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct xc5000_config s5h1411_xc5000_tunerconfig = {
+	.i2c_address      = 0x64,
+	.if_khz           = 5380,
+};
+
+static int xc5000_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	/* FIXME: generalize & move to common area */
+	adap->fe_adap[0].fe->callback = dib0700_xc5000_tuner_callback;
+
+	return dvb_attach(xc5000_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap,
+			  &s5h1411_xc5000_tunerconfig)
+		== NULL ? -ENODEV : 0;
+}
+
+static int dib0700_xc4000_tuner_callback(void *priv, int component,
+					 int command, int arg)
+{
+	struct dvb_usb_adapter *adap = priv;
+
+	if (command == XC4000_TUNER_RESET) {
+		/* Reset the tuner */
+		dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 0);
+		msleep(10);
+		dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
+	} else {
+		err("xc4000: unknown tuner callback command: %d\n", command);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct dibx000_agc_config stk7700p_7000p_xc4000_agc_config = {
+	.band_caps = BAND_UHF | BAND_VHF,
+	.setup = 0x64,
+	.inv_gain = 0x02c8,
+	.time_stabiliz = 0x15,
+	.alpha_level = 0x00,
+	.thlock = 0x76,
+	.wbd_inv = 0x01,
+	.wbd_ref = 0x0b33,
+	.wbd_sel = 0x00,
+	.wbd_alpha = 0x02,
+	.agc1_max = 0x00,
+	.agc1_min = 0x00,
+	.agc2_max = 0x9b26,
+	.agc2_min = 0x26ca,
+	.agc1_pt1 = 0x00,
+	.agc1_pt2 = 0x00,
+	.agc1_pt3 = 0x00,
+	.agc1_slope1 = 0x00,
+	.agc1_slope2 = 0x00,
+	.agc2_pt1 = 0x00,
+	.agc2_pt2 = 0x80,
+	.agc2_slope1 = 0x1d,
+	.agc2_slope2 = 0x1d,
+	.alpha_mant = 0x11,
+	.alpha_exp = 0x1b,
+	.beta_mant = 0x17,
+	.beta_exp = 0x33,
+	.perform_agc_softsplit = 0x00,
+};
+
+static struct dibx000_bandwidth_config stk7700p_xc4000_pll_config = {
+	60000, 30000,	/* internal, sampling */
+	1, 8, 3, 1, 0,	/* pll_cfg: prediv, ratio, range, reset, bypass */
+	0, 0, 1, 1, 0,	/* misc: refdiv, bypclk_div, IO_CLK_en_core, */
+			/* ADClkSrc, modulo */
+	(3 << 14) | (1 << 12) | 524,	/* sad_cfg: refsel, sel, freq_15k */
+	39370534,	/* ifreq */
+	20452225,	/* timf */
+	30000000	/* xtal */
+};
+
+/* FIXME: none of these inputs are validated yet */
+static struct dib7000p_config pctv_340e_config = {
+	.output_mpeg2_in_188_bytes = 1,
+
+	.agc_config_count = 1,
+	.agc = &stk7700p_7000p_xc4000_agc_config,
+	.bw  = &stk7700p_xc4000_pll_config,
+
+	.gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
+};
+
+/* PCTV 340e GPIOs map:
+   dib0700:
+   GPIO2  - CX25843 sleep
+   GPIO3  - CS5340 reset
+   GPIO5  - IRD
+   GPIO6  - Power Supply
+   GPIO8  - LNA (1=off 0=on)
+   GPIO10 - CX25843 reset
+   dib7000:
+   GPIO8  - xc4000 reset
+ */
+static int pctv340e_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_state *st = adap->dev->priv;
+
+	/* Power Supply on */
+	dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 0);
+	msleep(50);
+	dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 1);
+	msleep(100); /* Allow power supply to settle before probing */
+
+	/* cx25843 reset */
+	dib0700_set_gpio(adap->dev, GPIO10,  GPIO_OUT, 0);
+	msleep(1); /* cx25843 datasheet say 350us required */
+	dib0700_set_gpio(adap->dev, GPIO10,  GPIO_OUT, 1);
+
+	/* LNA off for now */
+	dib0700_set_gpio(adap->dev, GPIO8,  GPIO_OUT, 1);
+
+	/* Put the CX25843 to sleep for now since we're in digital mode */
+	dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1);
+
+	/* FIXME: not verified yet */
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(500);
+
+	if (dib7000pc_detection(&adap->dev->i2c_adap) == 0) {
+		/* Demodulator not found for some reason? */
+		return -ENODEV;
+	}
+
+	adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x12,
+			      &pctv_340e_config);
+	st->is_dib7000pc = 1;
+
+	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static struct xc4000_config dib7000p_xc4000_tunerconfig = {
+	.i2c_address	  = 0x61,
+	.default_pm	  = 1,
+	.dvb_amplitude	  = 0,
+	.set_smoothedcvbs = 0,
+	.if_khz		  = 5400
+};
+
+static int xc4000_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct i2c_adapter *tun_i2c;
+
+	/* The xc4000 is not on the main i2c bus */
+	tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe,
+					  DIBX000_I2C_INTERFACE_TUNER, 1);
+	if (tun_i2c == NULL) {
+		printk(KERN_ERR "Could not reach tuner i2c bus\n");
+		return 0;
+	}
+
+	/* Setup the reset callback */
+	adap->fe_adap[0].fe->callback = dib0700_xc4000_tuner_callback;
+
+	return dvb_attach(xc4000_attach, adap->fe_adap[0].fe, tun_i2c,
+			  &dib7000p_xc4000_tunerconfig)
+		== NULL ? -ENODEV : 0;
+}
+
+static struct lgdt3305_config hcw_lgdt3305_config = {
+	.i2c_addr           = 0x0e,
+	.mpeg_mode          = LGDT3305_MPEG_PARALLEL,
+	.tpclk_edge         = LGDT3305_TPCLK_FALLING_EDGE,
+	.tpvalid_polarity   = LGDT3305_TP_VALID_LOW,
+	.deny_i2c_rptr      = 0,
+	.spectral_inversion = 1,
+	.qam_if_khz         = 6000,
+	.vsb_if_khz         = 6000,
+	.usref_8vsb         = 0x0500,
+};
+
+static struct mxl5007t_config hcw_mxl5007t_config = {
+	.xtal_freq_hz = MxL_XTAL_25_MHZ,
+	.if_freq_hz = MxL_IF_6_MHZ,
+	.invert_if = 1,
+};
+
+/* TIGER-ATSC map:
+   GPIO0  - LNA_CTR  (H: LNA power enabled, L: LNA power disabled)
+   GPIO1  - ANT_SEL  (H: VPA, L: MCX)
+   GPIO4  - SCL2
+   GPIO6  - EN_TUNER
+   GPIO7  - SDA2
+   GPIO10 - DEM_RST
+
+   MXL is behind LG's i2c repeater.  LG is on SCL2/SDA2 gpios on the DIB
+ */
+static int lgdt3305_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_state *st = adap->dev->priv;
+
+	/* Make use of the new i2c functions from FW 1.20 */
+	st->fw_use_new_i2c_api = 1;
+
+	st->disable_streaming_master_mode = 1;
+
+	/* fe power enable */
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+	msleep(30);
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(30);
+
+	/* demod reset */
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(30);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+	msleep(30);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(30);
+
+	adap->fe_adap[0].fe = dvb_attach(lgdt3305_attach,
+			      &hcw_lgdt3305_config,
+			      &adap->dev->i2c_adap);
+
+	return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int mxl5007t_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	return dvb_attach(mxl5007t_attach, adap->fe_adap[0].fe,
+			  &adap->dev->i2c_adap, 0x60,
+			  &hcw_mxl5007t_config) == NULL ? -ENODEV : 0;
+}
+
+
+/* DVB-USB and USB stuff follows */
+struct usb_device_id dib0700_usb_id_table[] = {
+/* 0 */	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK7700P) },
+	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK7700P_PC) },
+	{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500) },
+	{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_2) },
+	{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK) },
+/* 5 */	{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR) },
+	{ USB_DEVICE(USB_VID_COMPRO,    USB_PID_COMPRO_VIDEOMATE_U500) },
+	{ USB_DEVICE(USB_VID_UNIWILL,   USB_PID_UNIWILL_STK7700P) },
+	{ USB_DEVICE(USB_VID_LEADTEK,   USB_PID_WINFAST_DTV_DONGLE_STK7700P) },
+	{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_2) },
+/* 10 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_2) },
+	{ USB_DEVICE(USB_VID_PINNACLE,  USB_PID_PINNACLE_PCTV2000E) },
+	{ USB_DEVICE(USB_VID_TERRATEC,
+			USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY) },
+	{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK) },
+	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK7700D) },
+/* 15 */{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK7070P) },
+	{ USB_DEVICE(USB_VID_PINNACLE,  USB_PID_PINNACLE_PCTV_DVB_T_FLASH) },
+	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK7070PD) },
+	{ USB_DEVICE(USB_VID_PINNACLE,
+			USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T) },
+	{ USB_DEVICE(USB_VID_COMPRO,    USB_PID_COMPRO_VIDEOMATE_U500_PC) },
+/* 20 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_EXPRESS) },
+	{ USB_DEVICE(USB_VID_GIGABYTE,  USB_PID_GIGABYTE_U7000) },
+	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ARTEC_T14BR) },
+	{ USB_DEVICE(USB_VID_ASUS,      USB_PID_ASUS_U3000) },
+	{ USB_DEVICE(USB_VID_ASUS,      USB_PID_ASUS_U3100) },
+/* 25 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_3) },
+	{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_MYTV_T) },
+	{ USB_DEVICE(USB_VID_TERRATEC,  USB_PID_TERRATEC_CINERGY_HT_USB_XE) },
+	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_EXPRESSCARD_320CX) },
+	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV72E) },
+/* 30 */{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV73E) },
+	{ USB_DEVICE(USB_VID_YUAN,	USB_PID_YUAN_EC372S) },
+	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_CINERGY_HT_EXPRESS) },
+	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_CINERGY_T_XXS) },
+	{ USB_DEVICE(USB_VID_LEADTEK,   USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) },
+/* 35 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) },
+	{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_3) },
+	{ USB_DEVICE(USB_VID_GIGABYTE,  USB_PID_GIGABYTE_U8000) },
+	{ USB_DEVICE(USB_VID_YUAN,      USB_PID_YUAN_STK7700PH) },
+	{ USB_DEVICE(USB_VID_ASUS,	USB_PID_ASUS_U3000H) },
+/* 40 */{ USB_DEVICE(USB_VID_PINNACLE,  USB_PID_PINNACLE_PCTV801E) },
+	{ USB_DEVICE(USB_VID_PINNACLE,  USB_PID_PINNACLE_PCTV801E_SE) },
+	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_CINERGY_T_EXPRESS) },
+	{ USB_DEVICE(USB_VID_TERRATEC,
+			USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2) },
+	{ USB_DEVICE(USB_VID_SONY,	USB_PID_SONY_PLAYTV) },
+/* 45 */{ USB_DEVICE(USB_VID_YUAN,      USB_PID_YUAN_PD378S) },
+	{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC) },
+	{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC_B210) },
+	{ USB_DEVICE(USB_VID_YUAN,	USB_PID_YUAN_MC770) },
+	{ USB_DEVICE(USB_VID_ELGATO,	USB_PID_ELGATO_EYETV_DTT) },
+/* 50 */{ USB_DEVICE(USB_VID_ELGATO,	USB_PID_ELGATO_EYETV_DTT_Dlx) },
+	{ USB_DEVICE(USB_VID_LEADTEK,   USB_PID_WINFAST_DTV_DONGLE_H) },
+	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_T3) },
+	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_T5) },
+	{ USB_DEVICE(USB_VID_YUAN,      USB_PID_YUAN_STK7700D) },
+/* 55 */{ USB_DEVICE(USB_VID_YUAN,	USB_PID_YUAN_STK7700D_2) },
+	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV73A) },
+	{ USB_DEVICE(USB_VID_PCTV,	USB_PID_PINNACLE_PCTV73ESE) },
+	{ USB_DEVICE(USB_VID_PCTV,	USB_PID_PINNACLE_PCTV282E) },
+	{ USB_DEVICE(USB_VID_DIBCOM,	USB_PID_DIBCOM_STK7770P) },
+/* 60 */{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_CINERGY_T_XXS_2) },
+	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK807XPVR) },
+	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK807XP) },
+	{ USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x000, 0x3f00) },
+	{ USB_DEVICE(USB_VID_EVOLUTEPC, USB_PID_TVWAY_PLUS) },
+/* 65 */{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV73ESE) },
+	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV282E) },
+	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK8096GP) },
+	{ USB_DEVICE(USB_VID_ELGATO,    USB_PID_ELGATO_EYETV_DIVERSITY) },
+	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_NIM9090M) },
+/* 70 */{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_NIM8096MD) },
+	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_NIM9090MD) },
+	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_NIM7090) },
+	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_TFE7090PVR) },
+	{ USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_AIRSTAR_TELESTICK_2) },
+/* 75 */{ USB_DEVICE(USB_VID_MEDION,    USB_PID_CREATIX_CTX1921) },
+	{ USB_DEVICE(USB_VID_PINNACLE,  USB_PID_PINNACLE_PCTV340E) },
+	{ USB_DEVICE(USB_VID_PINNACLE,  USB_PID_PINNACLE_PCTV340E_SE) },
+	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_TFE7090E) },
+	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_TFE7790E) },
+/* 80 */{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_TFE8096P) },
+	{ USB_DEVICE(USB_VID_ELGATO,	USB_PID_ELGATO_EYETV_DTT_2) },
+	{ 0 }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
+
+#define DIB0700_DEFAULT_DEVICE_PROPERTIES \
+	.caps              = DVB_USB_IS_AN_I2C_ADAPTER, \
+	.usb_ctrl          = DEVICE_SPECIFIC, \
+	.firmware          = "dvb-usb-dib0700-1.20.fw", \
+	.download_firmware = dib0700_download_firmware, \
+	.no_reconnect      = 1, \
+	.size_of_priv      = sizeof(struct dib0700_state), \
+	.i2c_algo          = &dib0700_i2c_algo, \
+	.identify_state    = dib0700_identify_state
+
+#define DIB0700_DEFAULT_STREAMING_CONFIG(ep) \
+	.streaming_ctrl   = dib0700_streaming_ctrl, \
+	.stream = { \
+		.type = USB_BULK, \
+		.count = 4, \
+		.endpoint = ep, \
+		.u = { \
+			.bulk = { \
+				.buffersize = 39480, \
+			} \
+		} \
+	}
+
+struct dvb_usb_device_properties dib0700_devices[] = {
+	{
+		DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+		.num_adapters = 1,
+		.adapter = {
+			{
+			.num_frontends = 1,
+			.fe = {{
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter       = stk7700p_pid_filter,
+				.pid_filter_ctrl  = stk7700p_pid_filter_ctrl,
+				.frontend_attach  = stk7700p_frontend_attach,
+				.tuner_attach     = stk7700p_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+			},
+		},
+
+		.num_device_descs = 8,
+		.devices = {
+			{   "DiBcom STK7700P reference design",
+				{ &dib0700_usb_id_table[0], &dib0700_usb_id_table[1] },
+				{ NULL },
+			},
+			{   "Hauppauge Nova-T Stick",
+				{ &dib0700_usb_id_table[4], &dib0700_usb_id_table[9], NULL },
+				{ NULL },
+			},
+			{   "AVerMedia AVerTV DVB-T Volar",
+				{ &dib0700_usb_id_table[5], &dib0700_usb_id_table[10] },
+				{ NULL },
+			},
+			{   "Compro Videomate U500",
+				{ &dib0700_usb_id_table[6], &dib0700_usb_id_table[19] },
+				{ NULL },
+			},
+			{   "Uniwill STK7700P based (Hama and others)",
+				{ &dib0700_usb_id_table[7], NULL },
+				{ NULL },
+			},
+			{   "Leadtek Winfast DTV Dongle (STK7700P based)",
+				{ &dib0700_usb_id_table[8], &dib0700_usb_id_table[34] },
+				{ NULL },
+			},
+			{   "AVerMedia AVerTV DVB-T Express",
+				{ &dib0700_usb_id_table[20] },
+				{ NULL },
+			},
+			{   "Gigabyte U7000",
+				{ &dib0700_usb_id_table[21], NULL },
+				{ NULL },
+			}
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+		.num_adapters = 2,
+		.adapter = {
+			{
+			.num_frontends = 1,
+			.fe = {{
+				.frontend_attach  = bristol_frontend_attach,
+				.tuner_attach     = bristol_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+			}, {
+			.num_frontends = 1,
+			.fe = {{
+				.frontend_attach  = bristol_frontend_attach,
+				.tuner_attach     = bristol_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+			}},
+			}
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "Hauppauge Nova-T 500 Dual DVB-T",
+				{ &dib0700_usb_id_table[2], &dib0700_usb_id_table[3], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+		.num_adapters = 2,
+		.adapter = {
+			{
+			.num_frontends = 1,
+			.fe = {{
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter       = stk70x0p_pid_filter,
+				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = stk7700d_frontend_attach,
+				.tuner_attach     = stk7700d_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+			}, {
+			.num_frontends = 1,
+			.fe = {{
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter       = stk70x0p_pid_filter,
+				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = stk7700d_frontend_attach,
+				.tuner_attach     = stk7700d_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+			}},
+			}
+		},
+
+		.num_device_descs = 5,
+		.devices = {
+			{   "Pinnacle PCTV 2000e",
+				{ &dib0700_usb_id_table[11], NULL },
+				{ NULL },
+			},
+			{   "Terratec Cinergy DT XS Diversity",
+				{ &dib0700_usb_id_table[12], NULL },
+				{ NULL },
+			},
+			{   "Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity",
+				{ &dib0700_usb_id_table[13], NULL },
+				{ NULL },
+			},
+			{   "DiBcom STK7700D reference design",
+				{ &dib0700_usb_id_table[14], NULL },
+				{ NULL },
+			},
+			{   "YUAN High-Tech DiBcom STK7700D",
+				{ &dib0700_usb_id_table[55], NULL },
+				{ NULL },
+			},
+
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+		.num_adapters = 1,
+		.adapter = {
+			{
+			.num_frontends = 1,
+			.fe = {{
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter       = stk70x0p_pid_filter,
+				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = stk7700P2_frontend_attach,
+				.tuner_attach     = stk7700d_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+			},
+		},
+
+		.num_device_descs = 3,
+		.devices = {
+			{   "ASUS My Cinema U3000 Mini DVBT Tuner",
+				{ &dib0700_usb_id_table[23], NULL },
+				{ NULL },
+			},
+			{   "Yuan EC372S",
+				{ &dib0700_usb_id_table[31], NULL },
+				{ NULL },
+			},
+			{   "Terratec Cinergy T Express",
+				{ &dib0700_usb_id_table[42], NULL },
+				{ NULL },
+			}
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+		.num_adapters = 1,
+		.adapter = {
+			{
+			.num_frontends = 1,
+			.fe = {{
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter       = stk70x0p_pid_filter,
+				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = stk7070p_frontend_attach,
+				.tuner_attach     = dib7070p_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+				.size_of_priv     = sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 12,
+		.devices = {
+			{   "DiBcom STK7070P reference design",
+				{ &dib0700_usb_id_table[15], NULL },
+				{ NULL },
+			},
+			{   "Pinnacle PCTV DVB-T Flash Stick",
+				{ &dib0700_usb_id_table[16], NULL },
+				{ NULL },
+			},
+			{   "Artec T14BR DVB-T",
+				{ &dib0700_usb_id_table[22], NULL },
+				{ NULL },
+			},
+			{   "ASUS My Cinema U3100 Mini DVBT Tuner",
+				{ &dib0700_usb_id_table[24], NULL },
+				{ NULL },
+			},
+			{   "Hauppauge Nova-T Stick",
+				{ &dib0700_usb_id_table[25], NULL },
+				{ NULL },
+			},
+			{   "Hauppauge Nova-T MyTV.t",
+				{ &dib0700_usb_id_table[26], NULL },
+				{ NULL },
+			},
+			{   "Pinnacle PCTV 72e",
+				{ &dib0700_usb_id_table[29], NULL },
+				{ NULL },
+			},
+			{   "Pinnacle PCTV 73e",
+				{ &dib0700_usb_id_table[30], NULL },
+				{ NULL },
+			},
+			{   "Elgato EyeTV DTT",
+				{ &dib0700_usb_id_table[49], NULL },
+				{ NULL },
+			},
+			{   "Yuan PD378S",
+				{ &dib0700_usb_id_table[45], NULL },
+				{ NULL },
+			},
+			{   "Elgato EyeTV Dtt Dlx PD378S",
+				{ &dib0700_usb_id_table[50], NULL },
+				{ NULL },
+			},
+			{   "Elgato EyeTV DTT rev. 2",
+				{ &dib0700_usb_id_table[81], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+		.num_adapters = 1,
+		.adapter = {
+			{
+			.num_frontends = 1,
+			.fe = {{
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter       = stk70x0p_pid_filter,
+				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = stk7070p_frontend_attach,
+				.tuner_attach     = dib7070p_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+				.size_of_priv     = sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 3,
+		.devices = {
+			{   "Pinnacle PCTV 73A",
+				{ &dib0700_usb_id_table[56], NULL },
+				{ NULL },
+			},
+			{   "Pinnacle PCTV 73e SE",
+				{ &dib0700_usb_id_table[57], &dib0700_usb_id_table[65], NULL },
+				{ NULL },
+			},
+			{   "Pinnacle PCTV 282e",
+				{ &dib0700_usb_id_table[58], &dib0700_usb_id_table[66], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+		.num_adapters = 2,
+		.adapter = {
+			{
+			.num_frontends = 1,
+			.fe = {{
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter       = stk70x0p_pid_filter,
+				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = novatd_frontend_attach,
+				.tuner_attach     = dib7070p_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+				.size_of_priv     = sizeof(struct dib0700_adapter_state),
+			}, {
+			.num_frontends = 1,
+			.fe = {{
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter       = stk70x0p_pid_filter,
+				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = novatd_frontend_attach,
+				.tuner_attach     = dib7070p_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+			}},
+				.size_of_priv     = sizeof(struct dib0700_adapter_state),
+			}
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "Hauppauge Nova-TD Stick (52009)",
+				{ &dib0700_usb_id_table[35], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+		.num_adapters = 2,
+		.adapter = {
+			{
+			.num_frontends = 1,
+			.fe = {{
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter       = stk70x0p_pid_filter,
+				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = stk7070pd_frontend_attach0,
+				.tuner_attach     = dib7070p_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+				.size_of_priv     = sizeof(struct dib0700_adapter_state),
+			}, {
+			.num_frontends = 1,
+			.fe = {{
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter       = stk70x0p_pid_filter,
+				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = stk7070pd_frontend_attach1,
+				.tuner_attach     = dib7070p_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+			}},
+				.size_of_priv     = sizeof(struct dib0700_adapter_state),
+			}
+		},
+
+		.num_device_descs = 5,
+		.devices = {
+			{   "DiBcom STK7070PD reference design",
+				{ &dib0700_usb_id_table[17], NULL },
+				{ NULL },
+			},
+			{   "Pinnacle PCTV Dual DVB-T Diversity Stick",
+				{ &dib0700_usb_id_table[18], NULL },
+				{ NULL },
+			},
+			{   "Hauppauge Nova-TD-500 (84xxx)",
+				{ &dib0700_usb_id_table[36], NULL },
+				{ NULL },
+			},
+			{  "Terratec Cinergy DT USB XS Diversity/ T5",
+				{ &dib0700_usb_id_table[43],
+					&dib0700_usb_id_table[53], NULL},
+				{ NULL },
+			},
+			{  "Sony PlayTV",
+				{ &dib0700_usb_id_table[44], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+		.num_adapters = 2,
+		.adapter = {
+			{
+			.num_frontends = 1,
+			.fe = {{
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter       = stk70x0p_pid_filter,
+				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = stk7070pd_frontend_attach0,
+				.tuner_attach     = dib7070p_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+				.size_of_priv     = sizeof(struct dib0700_adapter_state),
+			}, {
+			.num_frontends = 1,
+			.fe = {{
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter       = stk70x0p_pid_filter,
+				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = stk7070pd_frontend_attach1,
+				.tuner_attach     = dib7070p_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+			}},
+				.size_of_priv     = sizeof(struct dib0700_adapter_state),
+			}
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "Elgato EyeTV Diversity",
+				{ &dib0700_usb_id_table[68], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_NEC_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+		.num_adapters = 1,
+		.adapter = {
+			{
+			.num_frontends = 1,
+			.fe = {{
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter       = stk70x0p_pid_filter,
+				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = stk7700ph_frontend_attach,
+				.tuner_attach     = stk7700ph_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+				.size_of_priv = sizeof(struct
+						dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 9,
+		.devices = {
+			{   "Terratec Cinergy HT USB XE",
+				{ &dib0700_usb_id_table[27], NULL },
+				{ NULL },
+			},
+			{   "Pinnacle Expresscard 320cx",
+				{ &dib0700_usb_id_table[28], NULL },
+				{ NULL },
+			},
+			{   "Terratec Cinergy HT Express",
+				{ &dib0700_usb_id_table[32], NULL },
+				{ NULL },
+			},
+			{   "Gigabyte U8000-RH",
+				{ &dib0700_usb_id_table[37], NULL },
+				{ NULL },
+			},
+			{   "YUAN High-Tech STK7700PH",
+				{ &dib0700_usb_id_table[38], NULL },
+				{ NULL },
+			},
+			{   "Asus My Cinema-U3000Hybrid",
+				{ &dib0700_usb_id_table[39], NULL },
+				{ NULL },
+			},
+			{   "YUAN High-Tech MC770",
+				{ &dib0700_usb_id_table[48], NULL },
+				{ NULL },
+			},
+			{   "Leadtek WinFast DTV Dongle H",
+				{ &dib0700_usb_id_table[51], NULL },
+				{ NULL },
+			},
+			{   "YUAN High-Tech STK7700D",
+				{ &dib0700_usb_id_table[54], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+			.num_frontends = 1,
+			.fe = {{
+				.frontend_attach  = s5h1411_frontend_attach,
+				.tuner_attach     = xc5000_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+				.size_of_priv = sizeof(struct
+						dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 2,
+		.devices = {
+			{   "Pinnacle PCTV HD Pro USB Stick",
+				{ &dib0700_usb_id_table[40], NULL },
+				{ NULL },
+			},
+			{   "Pinnacle PCTV HD USB Stick",
+				{ &dib0700_usb_id_table[41], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+			.num_frontends = 1,
+			.fe = {{
+				.frontend_attach  = lgdt3305_frontend_attach,
+				.tuner_attach     = mxl5007t_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+				.size_of_priv = sizeof(struct
+						dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 2,
+		.devices = {
+			{   "Hauppauge ATSC MiniCard (B200)",
+				{ &dib0700_usb_id_table[46], NULL },
+				{ NULL },
+			},
+			{   "Hauppauge ATSC MiniCard (B210)",
+				{ &dib0700_usb_id_table[47], NULL },
+				{ NULL },
+			},
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+		.num_adapters = 1,
+		.adapter = {
+			{
+			.num_frontends = 1,
+			.fe = {{
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter       = stk70x0p_pid_filter,
+				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = stk7770p_frontend_attach,
+				.tuner_attach     = dib7770p_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 4,
+		.devices = {
+			{   "DiBcom STK7770P reference design",
+				{ &dib0700_usb_id_table[59], NULL },
+				{ NULL },
+			},
+			{   "Terratec Cinergy T USB XXS (HD)/ T3",
+				{ &dib0700_usb_id_table[33],
+					&dib0700_usb_id_table[52],
+					&dib0700_usb_id_table[60], NULL},
+				{ NULL },
+			},
+			{   "TechniSat AirStar TeleStick 2",
+				{ &dib0700_usb_id_table[74], NULL },
+				{ NULL },
+			},
+			{   "Medion CTX1921 DVB-T USB",
+				{ &dib0700_usb_id_table[75], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+			.num_frontends = 1,
+			.fe = {{
+				.caps  = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter = stk80xx_pid_filter,
+				.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
+				.frontend_attach  = stk807x_frontend_attach,
+				.tuner_attach     = dib807x_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 3,
+		.devices = {
+			{   "DiBcom STK807xP reference design",
+				{ &dib0700_usb_id_table[62], NULL },
+				{ NULL },
+			},
+			{   "Prolink Pixelview SBTVD",
+				{ &dib0700_usb_id_table[63], NULL },
+				{ NULL },
+			},
+			{   "EvolutePC TVWay+",
+				{ &dib0700_usb_id_table[64], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_NEC_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 2,
+		.adapter = {
+			{
+			.num_frontends = 1,
+			.fe = {{
+				.caps  = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter = stk80xx_pid_filter,
+				.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
+				.frontend_attach  = stk807xpvr_frontend_attach0,
+				.tuner_attach     = dib807x_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+			{
+			.num_frontends = 1,
+			.fe = {{
+				.caps  = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter = stk80xx_pid_filter,
+				.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
+				.frontend_attach  = stk807xpvr_frontend_attach1,
+				.tuner_attach     = dib807x_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+			}},
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "DiBcom STK807xPVR reference design",
+				{ &dib0700_usb_id_table[61], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+			.num_frontends = 1,
+			.fe = {{
+				.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
+					DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter = stk80xx_pid_filter,
+				.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
+				.frontend_attach  = stk809x_frontend_attach,
+				.tuner_attach     = dib809x_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "DiBcom STK8096GP reference design",
+				{ &dib0700_usb_id_table[67], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+			.num_frontends = 1,
+			.fe = {{
+				.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
+					DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter = dib90x0_pid_filter,
+				.pid_filter_ctrl = dib90x0_pid_filter_ctrl,
+				.frontend_attach  = stk9090m_frontend_attach,
+				.tuner_attach     = dib9090_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "DiBcom STK9090M reference design",
+				{ &dib0700_usb_id_table[69], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+			.num_frontends = 1,
+			.fe = {{
+				.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
+					DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter = stk80xx_pid_filter,
+				.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
+				.frontend_attach  = nim8096md_frontend_attach,
+				.tuner_attach     = nim8096md_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "DiBcom NIM8096MD reference design",
+				{ &dib0700_usb_id_table[70], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+			.num_frontends = 1,
+			.fe = {{
+				.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
+					DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter = dib90x0_pid_filter,
+				.pid_filter_ctrl = dib90x0_pid_filter_ctrl,
+				.frontend_attach  = nim9090md_frontend_attach,
+				.tuner_attach     = nim9090md_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "DiBcom NIM9090MD reference design",
+				{ &dib0700_usb_id_table[71], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+			.num_frontends = 1,
+			.fe = {{
+				.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
+					DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter = stk70x0p_pid_filter,
+				.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = nim7090_frontend_attach,
+				.tuner_attach     = nim7090_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "DiBcom NIM7090 reference design",
+				{ &dib0700_usb_id_table[72], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 2,
+		.adapter = {
+			{
+			.num_frontends = 1,
+			.fe = {{
+				.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
+					DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter = stk70x0p_pid_filter,
+				.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = tfe7090pvr_frontend0_attach,
+				.tuner_attach     = tfe7090pvr_tuner0_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+			}},
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+			{
+			.num_frontends = 1,
+			.fe = {{
+				.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
+					DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter = stk70x0p_pid_filter,
+				.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
+				.frontend_attach  = tfe7090pvr_frontend1_attach,
+				.tuner_attach     = tfe7090pvr_tuner1_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "DiBcom TFE7090PVR reference design",
+				{ &dib0700_usb_id_table[73], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+			.num_frontends = 1,
+			.fe = {{
+				.frontend_attach  = pctv340e_frontend_attach,
+				.tuner_attach     = xc4000_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+			}},
+				.size_of_priv = sizeof(struct
+						dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 2,
+		.devices = {
+			{   "Pinnacle PCTV 340e HD Pro USB Stick",
+				{ &dib0700_usb_id_table[76], NULL },
+				{ NULL },
+			},
+			{   "Pinnacle PCTV Hybrid Stick Solo",
+				{ &dib0700_usb_id_table[77], NULL },
+				{ NULL },
+			},
+		},
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+				.num_frontends = 1,
+				.fe = {{
+					.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
+						DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+					.pid_filter_count = 32,
+					.pid_filter = stk70x0p_pid_filter,
+					.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
+					.frontend_attach  = tfe7090e_frontend_attach,
+					.tuner_attach     = tfe7090e_tuner_attach,
+
+					DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+				} },
+
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "DiBcom TFE7090E reference design",
+				{ &dib0700_usb_id_table[78], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+				.num_frontends = 1,
+				.fe = {{
+					.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
+						DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+					.pid_filter_count = 32,
+					.pid_filter = stk70x0p_pid_filter,
+					.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
+					.frontend_attach  = tfe7790e_frontend_attach,
+					.tuner_attach     = tfe7790e_tuner_attach,
+
+					DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+				} },
+
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "DiBcom TFE7790E reference design",
+				{ &dib0700_usb_id_table[79], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+				.num_frontends = 1,
+				.fe = {{
+					.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
+						DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+					.pid_filter_count = 32,
+					.pid_filter = stk80xx_pid_filter,
+					.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
+					.frontend_attach  = tfe8096p_frontend_attach,
+					.tuner_attach     = tfe8096p_tuner_attach,
+
+					DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+				} },
+
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "DiBcom TFE8096P reference design",
+				{ &dib0700_usb_id_table[80], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	},
+};
+
+int dib0700_device_count = ARRAY_SIZE(dib0700_devices);