Merge mainline/master into arm/fixes

This brings in the mainline tree right after armsoc contents was merged
this release cycle, so that we can re-run savedefconfig, etc.

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 7 insertions, 224 deletions

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
index 11c705d225d0..071949412caf 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
@@ -6,205 +6,18 @@
 /dts-v1/;
 
 #include "imx8mn.dtsi"
+#include "imx8mn-evk.dtsi"
 
 / {
 	model = "NXP i.MX8MNano DDR4 EVK board";
 	compatible = "fsl,imx8mn-ddr4-evk", "fsl,imx8mn";
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	reg_usdhc2_vmmc: regulator-usdhc2 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
-		regulator-name = "VSD_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
 };
 
 &A53_0 {
 	cpu-supply = <&buck2_reg>;
 };
 
-&iomuxc {
-	pinctrl-names = "default";
-
-	pinctrl_fec1: fec1grp {
-		fsl,pins = <
-			MX8MN_IOMUXC_ENET_MDC_ENET1_MDC		0x3
-			MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO	0x3
-			MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x1f
-			MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x1f
-			MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x1f
-			MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x1f
-			MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x91
-			MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x91
-			MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x91
-			MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x91
-			MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x1f
-			MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
-			MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
-			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
-			MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22	0x19
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
-			MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
-		>;
-	};
-
-	pinctrl_pmic: pmicirq {
-		fsl,pins = <
-			MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
-		>;
-	};
-
-	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
-		fsl,pins = <
-			MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
-			MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
-		>;
-	};
-
-	pinctrl_usdhc2_gpio: usdhc2grpgpio {
-		fsl,pins = <
-			MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x1c4
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
-			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
-			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
-			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
-			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
-			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
-			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
-		fsl,pins = <
-			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
-			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
-			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
-			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
-			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
-			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
-			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
-		fsl,pins = <
-			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
-			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
-			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
-			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
-			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
-			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
-			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000190
-			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
-			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
-			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
-			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
-			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
-			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
-			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
-			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
-			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
-			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x190
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-		fsl,pins = <
-			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000194
-			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
-			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
-			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
-			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
-			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
-			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
-			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
-			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
-			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
-			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x194
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-		fsl,pins = <
-			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000196
-			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
-			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
-			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
-			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
-			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
-			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
-			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
-			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
-			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
-			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x196
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
-		>;
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy0>;
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			at803x,led-act-blind-workaround;
-			at803x,eee-disabled;
-			at803x,vddio-1p8v;
-		};
-	};
-};
-
 &i2c1 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
 	pmic@4b {
 		compatible = "rohm,bd71847";
 		reg = <0x4b>;
@@ -309,40 +122,10 @@
 	};
 };
 
-&snvs_pwrkey {
-	status = "okay";
-};
-
-&uart2 { /* console */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
-	cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	vmmc-supply = <&reg_usdhc2_vmmc>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
+&iomuxc {
+	pinctrl_pmic: pmicirq {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
+		>;
+	};
 };