Merge tag 'usb-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here's the big USB 3.11-rc1 merge request.

  Lots of gadget and finally, chipidea driver updates (they were much
  needed), along with a new host controller driver, lots of little
  serial driver fixes, the removal of the 255 usb-serial device
  limitation, and a variety of other minor things.

  All of these have been in the linux-next releases for a while"

* tag 'usb-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (254 commits)
  usb: musb: omap2430: make it compile again
  usb: chipidea: ci_hdrc_imx: access phy via private data
  xhci: Add missing unlocks on error paths
  USB: option,qcserial: move Novatel Gobi1K IDs to qcserial
  ehci-atmel.c: prepare clk before calling enable
  USB: ohci-at91: prepare clk before calling enable
  USB: HWA: fix device probe failure
  wusbcore: add entries in Documentation/ABI for new wusbhc sysfs attributes
  wusbcore: add sysfs attribute for retry count
  wusbcore: add sysfs attribute for DNTS count and interval
  usb: chipidea: drop "13xxx" infix
  usb: phy: tegra: remove duplicated include from phy-tegra-usb.c
  usb: host: xhci-plat: release mem region while removing module
  usbmisc_imx: allow autoloading on according to dt ids
  usb: fix build error without CONFIG_USB_PHY
  usb: check usb_hub_to_struct_hub() return value
  xhci: check for failed dma pool allocation
  usb: gadget: f_subset: fix missing unlock on error in geth_alloc()
  usb: gadget: f_ncm: fix missing unlock on error in ncm_alloc()
  usb: gadget: f_ecm: fix missing unlock on error in ecm_alloc()
  ...

1 files changed, 37 insertions, 12 deletions

diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 56a91106041b..96d6d8a3aa72 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -455,13 +455,24 @@
 		status = "disabled";
 	};
 
-	phy1: usb-phy@c5000400 {
+	phy1: usb-phy@c5000000 {
 		compatible = "nvidia,tegra20-usb-phy";
-		reg = <0xc5000400 0x3c00>;
+		reg = <0xc5000000 0x4000 0xc5000000 0x4000>;
 		phy_type = "utmi";
+		clocks = <&tegra_car 22>,
+			 <&tegra_car 127>,
+			 <&tegra_car 106>,
+			 <&tegra_car 22>;
+		clock-names = "reg", "pll_u", "timer", "utmi-pads";
 		nvidia,has-legacy-mode;
-		clocks = <&tegra_car 22>, <&tegra_car 127>;
-		clock-names = "phy", "pll_u";
+		hssync_start_delay = <9>;
+		idle_wait_delay = <17>;
+		elastic_limit = <16>;
+		term_range_adj = <6>;
+		xcvr_setup = <9>;
+		xcvr_lsfslew = <1>;
+		xcvr_lsrslew = <1>;
+		status = "disabled";
 	};
 
 	usb@c5004000 {
@@ -474,12 +485,15 @@
 		status = "disabled";
 	};
 
-	phy2: usb-phy@c5004400 {
+	phy2: usb-phy@c5004000 {
 		compatible = "nvidia,tegra20-usb-phy";
-		reg = <0xc5004400 0x3c00>;
+		reg = <0xc5004000 0x4000>;
 		phy_type = "ulpi";
-		clocks = <&tegra_car 93>, <&tegra_car 127>;
-		clock-names = "phy", "pll_u";
+		clocks = <&tegra_car 58>,
+			 <&tegra_car 127>,
+			 <&tegra_car 93>;
+		clock-names = "reg", "pll_u", "ulpi-link";
+		status = "disabled";
 	};
 
 	usb@c5008000 {
@@ -492,12 +506,23 @@
 		status = "disabled";
 	};
 
-	phy3: usb-phy@c5008400 {
+	phy3: usb-phy@c5008000 {
 		compatible = "nvidia,tegra20-usb-phy";
-		reg = <0xc5008400 0x3c00>;
+		reg = <0xc5008000 0x4000 0xc5000000 0x4000>;
 		phy_type = "utmi";
-		clocks = <&tegra_car 22>, <&tegra_car 127>;
-		clock-names = "phy", "pll_u";
+		clocks = <&tegra_car 59>,
+			 <&tegra_car 127>,
+			 <&tegra_car 106>,
+			 <&tegra_car 22>;
+		clock-names = "reg", "pll_u", "timer", "utmi-pads";
+		hssync_start_delay = <9>;
+		idle_wait_delay = <17>;
+		elastic_limit = <16>;
+		term_range_adj = <6>;
+		xcvr_setup = <9>;
+		xcvr_lsfslew = <2>;
+		xcvr_lsrslew = <2>;
+		status = "disabled";
 	};
 
 	sdhci@c8000000 {