Merge tag 'pci-v5.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 "Resource management:

   - Improve resource assignment for hot-added nested bridges, e.g.,
     Thunderbolt (Nicholas Johnson)

  Power management:

   - Optionally print config space of devices before suspend (Chen Yu)

   - Increase D3 delay for AMD Ryzen5/7 XHCI controllers (Daniel Drake)

  Virtualization:

   - Generalize DMA alias quirks (James Sewart)

   - Add DMA alias quirk for PLX PEX NTB (James Sewart)

   - Fix IOV memory leak (Navid Emamdoost)

  AER:

   - Log which device prevents error recovery (Yicong Yang)

  Peer-to-peer DMA:

   - Whitelist Intel SkyLake-E (Armen Baloyan)

  Broadcom iProc host bridge driver:

   - Apply PAXC quirk whether driver is built-in or module (Wei Liu)

  Broadcom STB host bridge driver:

   - Add Broadcom STB PCIe host controller driver (Jim Quinlan)

  Intel Gateway SoC host bridge driver:

   - Add driver for Intel Gateway SoC (Dilip Kota)

  Intel VMD host bridge driver:

   - Add support for DMA aliases on other buses (Jon Derrick)

   - Remove dma_map_ops overrides (Jon Derrick)

   - Remove now-unused X86_DEV_DMA_OPS (Christoph Hellwig)

  NVIDIA Tegra host bridge driver:

   - Fix Tegra30 afi_pex2_ctrl register offset (Marcel Ziswiler)

  Panasonic UniPhier host bridge driver:

   - Remove module code since driver can't be built as a module
     (Masahiro Yamada)

  Qualcomm host bridge driver:

   - Add support for SDM845 PCIe controller (Bjorn Andersson)

  TI Keystone host bridge driver:

   - Fix "num-viewport" DT property error handling (Kishon Vijay Abraham I)

   - Fix link training retries initiation (Yurii Monakov)

   - Fix outbound region mapping (Yurii Monakov)

  Misc:

   - Add Switchtec Gen4 support (Kelvin Cao)

   - Add Switchtec Intercomm Notify and Upstream Error Containment
     support (Logan Gunthorpe)

   - Use dma_set_mask_and_coherent() since Switchtec supports 64-bit
     addressing (Wesley Sheng)"

* tag 'pci-v5.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (60 commits)
  PCI: Allow adjust_bridge_window() to shrink resource if necessary
  PCI: Set resource size directly in adjust_bridge_window()
  PCI: Rename extend_bridge_window() to adjust_bridge_window()
  PCI: Rename extend_bridge_window() parameter
  PCI: Consider alignment of hot-added bridges when assigning resources
  PCI: Remove local variable usage in pci_bus_distribute_available_resources()
  PCI: Pass size + alignment to pci_bus_distribute_available_resources()
  PCI: Rename variables
  PCI: vmd: Add two VMD Device IDs
  PCI: Remove unnecessary braces
  PCI: brcmstb: Add MSI support
  PCI: brcmstb: Add Broadcom STB PCIe host controller driver
  x86/PCI: Remove X86_DEV_DMA_OPS
  PCI: vmd: Remove dma_map_ops overrides
  iommu/vt-d: Remove VMD child device sanity check
  iommu/vt-d: Use pci_real_dma_dev() for mapping
  PCI: Introduce pci_real_dma_dev()
  x86/PCI: Expose VMD's pci_dev in struct pci_sysdata
  x86/PCI: Add to_pci_sysdata() helper
  PCI/AER: Initialize aer_fifo
  ...

4 files changed, 255 insertions, 1 deletions

diff --git a/Documentation/PCI/msi-howto.rst b/Documentation/PCI/msi-howto.rst
index 994cbb660ade..aa2046af69f7 100644
--- a/Documentation/PCI/msi-howto.rst
+++ b/Documentation/PCI/msi-howto.rst
@@ -283,5 +283,5 @@ or disabled (0).  If 0 is found in any of the msi_bus files belonging
 to bridges between the PCI root and the device, MSIs are disabled.
 
 It is also worth checking the device driver to see whether it supports MSIs.
-For example, it may contain calls to pci_irq_alloc_vectors() with the
+For example, it may contain calls to pci_alloc_irq_vectors() with the
 PCI_IRQ_MSI or PCI_IRQ_MSIX flags.
diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
new file mode 100644
index 000000000000..77d3e81a437b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Brcmstb PCIe Host Controller Device Tree Bindings
+
+maintainers:
+  - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm2711-pcie # The Raspberry Pi 4
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: PCIe host controller
+      - description: builtin MSI controller
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: pcie
+      - const: msi
+
+  ranges:
+    maxItems: 1
+
+  dma-ranges:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: sw_pcie
+
+  msi-controller:
+    description: Identifies the node as an MSI controller.
+
+  msi-parent:
+    description: MSI controller the device is capable of using.
+
+  brcm,enable-ssc:
+    description: Indicates usage of spread-spectrum clocking.
+    type: boolean
+
+required:
+  - reg
+  - dma-ranges
+  - "#interrupt-cells"
+  - interrupts
+  - interrupt-names
+  - interrupt-map-mask
+  - interrupt-map
+  - msi-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    scb {
+            #address-cells = <2>;
+            #size-cells = <1>;
+            pcie0: pcie@7d500000 {
+                    compatible = "brcm,bcm2711-pcie";
+                    reg = <0x0 0x7d500000 0x9310>;
+                    device_type = "pci";
+                    #address-cells = <3>;
+                    #size-cells = <2>;
+                    #interrupt-cells = <1>;
+                    interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+                                 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+                    interrupt-names = "pcie", "msi";
+                    interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+                    interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+                    msi-parent = <&pcie0>;
+                    msi-controller;
+                    ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
+                    dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>;
+                    brcm,enable-ssc;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
new file mode 100644
index 000000000000..db605d8a387d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/intel-gw-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PCIe RC controller on Intel Gateway SoCs
+
+maintainers:
+  - Dilip Kota <eswara.kota@linux.intel.com>
+
+properties:
+  compatible:
+    items:
+      - const: intel,lgm-pcie
+      - const: snps,dw-pcie
+
+  device_type:
+    const: pci
+
+  "#address-cells":
+    const: 3
+
+  "#size-cells":
+    const: 2
+
+  reg:
+    items:
+      - description: Controller control and status registers.
+      - description: PCIe configuration registers.
+      - description: Controller application registers.
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: config
+      - const: app
+
+  ranges:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie
+
+  reset-gpios:
+    maxItems: 1
+
+  linux,pci-domain: true
+
+  num-lanes:
+    maximum: 2
+    description: Number of lanes to use for this port.
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-map-mask:
+    description: Standard PCI IRQ mapping properties.
+
+  interrupt-map:
+    description: Standard PCI IRQ mapping properties.
+
+  max-link-speed:
+    description: Specify PCI Gen for link capability.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [ 1, 2, 3, 4 ]
+      - default: 1
+
+  bus-range:
+    description: Range of bus numbers associated with this controller.
+
+  reset-assert-ms:
+    description: |
+      Delay after asserting reset to the PCIe device.
+    maximum: 500
+    default: 100
+
+required:
+  - compatible
+  - device_type
+  - "#address-cells"
+  - "#size-cells"
+  - reg
+  - reg-names
+  - ranges
+  - resets
+  - clocks
+  - phys
+  - phy-names
+  - reset-gpios
+  - '#interrupt-cells'
+  - interrupt-map
+  - interrupt-map-mask
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/intel,lgm-clk.h>
+    pcie10: pcie@d0e00000 {
+      compatible = "intel,lgm-pcie", "snps,dw-pcie";
+      device_type = "pci";
+      #address-cells = <3>;
+      #size-cells = <2>;
+      reg = <0xd0e00000 0x1000>,
+            <0xd2000000 0x800000>,
+            <0xd0a41000 0x1000>;
+      reg-names = "dbi", "config", "app";
+      linux,pci-domain = <0>;
+      max-link-speed = <4>;
+      bus-range = <0x00 0x08>;
+      interrupt-parent = <&ioapic1>;
+      #interrupt-cells = <1>;
+      interrupt-map-mask = <0 0 0 0x7>;
+      interrupt-map = <0 0 0 1 &ioapic1 27 1>,
+                      <0 0 0 2 &ioapic1 28 1>,
+                      <0 0 0 3 &ioapic1 29 1>,
+                      <0 0 0 4 &ioapic1 30 1>;
+      ranges = <0x02000000 0 0xd4000000 0xd4000000 0 0x04000000>;
+      resets = <&rcu0 0x50 0>;
+      clocks = <&cgu0 LGM_GCLK_PCIE10>;
+      phys = <&cb0phy0>;
+      phy-names = "pcie";
+      reset-assert-ms = <500>;
+      reset-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+      num-lanes = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
index ada80b01bf0c..981b4de12807 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
@@ -11,6 +11,7 @@
 			- "qcom,pcie-ipq4019" for ipq4019
 			- "qcom,pcie-ipq8074" for ipq8074
 			- "qcom,pcie-qcs404" for qcs404
+			- "qcom,pcie-sdm845" for sdm845
 
 - reg:
 	Usage: required
@@ -126,6 +127,18 @@
 			- "master_bus"	AXI Master clock
 			- "slave_bus"	AXI Slave clock
 
+-clock-names:
+	Usage: required for sdm845
+	Value type: <stringlist>
+	Definition: Should contain the following entries
+			- "aux"		Auxiliary clock
+			- "cfg"		Configuration clock
+			- "bus_master"	Master AXI clock
+			- "bus_slave"	Slave AXI clock
+			- "slave_q2a"	Slave Q2A clock
+			- "tbu"		PCIe TBU clock
+			- "pipe"	PIPE clock
+
 - resets:
 	Usage: required
 	Value type: <prop-encoded-array>
@@ -188,6 +201,12 @@
 			- "pwr"			PWR reset
 			- "ahb"			AHB reset
 
+- reset-names:
+	Usage: required for sdm845
+	Value type: <stringlist>
+	Definition: Should contain the following entries
+			- "pci"			PCIe core reset
+
 - power-domains:
 	Usage: required for apq8084 and msm8996/apq8096
 	Value type: <prop-encoded-array>