diff options
Diffstat (limited to 'include/linux/soc')
| -rw-r--r-- | include/linux/soc/qcom/wcnss_ctrl.h | 13 | ||||
| -rw-r--r-- | include/linux/soc/ti/ti_sci_protocol.h | 249 |
2 files changed, 262 insertions, 0 deletions
diff --git a/include/linux/soc/qcom/wcnss_ctrl.h b/include/linux/soc/qcom/wcnss_ctrl.h index a37bc5538f19..eab64976a73b 100644 --- a/include/linux/soc/qcom/wcnss_ctrl.h +++ b/include/linux/soc/qcom/wcnss_ctrl.h @@ -3,6 +3,19 @@ #include <linux/soc/qcom/smd.h> +#if IS_ENABLED(CONFIG_QCOM_WCNSS_CTRL) + struct qcom_smd_channel *qcom_wcnss_open_channel(void *wcnss, const char *name, qcom_smd_cb_t cb); +#else + +static inline struct qcom_smd_channel* +qcom_wcnss_open_channel(void *wcnss, const char *name, qcom_smd_cb_t cb) +{ + WARN_ON(1); + return ERR_PTR(-ENXIO); +} + +#endif + #endif diff --git a/include/linux/soc/ti/ti_sci_protocol.h b/include/linux/soc/ti/ti_sci_protocol.h new file mode 100644 index 000000000000..0ccbc138c26a --- /dev/null +++ b/include/linux/soc/ti/ti_sci_protocol.h @@ -0,0 +1,249 @@ +/* + * Texas Instruments System Control Interface Protocol + * + * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ + * Nishanth Menon + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __TISCI_PROTOCOL_H +#define __TISCI_PROTOCOL_H + +/** + * struct ti_sci_version_info - version information structure + * @abi_major: Major ABI version. Change here implies risk of backward + * compatibility break. + * @abi_minor: Minor ABI version. Change here implies new feature addition, + * or compatible change in ABI. + * @firmware_revision: Firmware revision (not usually used). + * @firmware_description: Firmware description (not usually used). + */ +struct ti_sci_version_info { + u8 abi_major; + u8 abi_minor; + u16 firmware_revision; + char firmware_description[32]; +}; + +struct ti_sci_handle; + +/** + * struct ti_sci_core_ops - SoC Core Operations + * @reboot_device: Reboot the SoC + * Returns 0 for successful request(ideally should never return), + * else returns corresponding error value. + */ +struct ti_sci_core_ops { + int (*reboot_device)(const struct ti_sci_handle *handle); +}; + +/** + * struct ti_sci_dev_ops - Device control operations + * @get_device: Command to request for device managed by TISCI + * Returns 0 for successful exclusive request, else returns + * corresponding error message. + * @idle_device: Command to idle a device managed by TISCI + * Returns 0 for successful exclusive request, else returns + * corresponding error message. + * @put_device: Command to release a device managed by TISCI + * Returns 0 for successful release, else returns corresponding + * error message. + * @is_valid: Check if the device ID is a valid ID. + * Returns 0 if the ID is valid, else returns corresponding error. + * @get_context_loss_count: Command to retrieve context loss counter - this + * increments every time the device looses context. Overflow + * is possible. + * - count: pointer to u32 which will retrieve counter + * Returns 0 for successful information request and count has + * proper data, else returns corresponding error message. + * @is_idle: Reports back about device idle state + * - req_state: Returns requested idle state + * Returns 0 for successful information request and req_state and + * current_state has proper data, else returns corresponding error + * message. + * @is_stop: Reports back about device stop state + * - req_state: Returns requested stop state + * - current_state: Returns current stop state + * Returns 0 for successful information request and req_state and + * current_state has proper data, else returns corresponding error + * message. + * @is_on: Reports back about device ON(or active) state + * - req_state: Returns requested ON state + * - current_state: Returns current ON state + * Returns 0 for successful information request and req_state and + * current_state has proper data, else returns corresponding error + * message. + * @is_transitioning: Reports back if the device is in the middle of transition + * of state. + * -current_state: Returns 'true' if currently transitioning. + * @set_device_resets: Command to configure resets for device managed by TISCI. + * -reset_state: Device specific reset bit field + * Returns 0 for successful request, else returns + * corresponding error message. + * @get_device_resets: Command to read state of resets for device managed + * by TISCI. + * -reset_state: pointer to u32 which will retrieve resets + * Returns 0 for successful request, else returns + * corresponding error message. + * + * NOTE: for all these functions, the following parameters are generic in + * nature: + * -handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle + * -id: Device Identifier + * + * Request for the device - NOTE: the client MUST maintain integrity of + * usage count by balancing get_device with put_device. No refcounting is + * managed by driver for that purpose. + */ +struct ti_sci_dev_ops { + int (*get_device)(const struct ti_sci_handle *handle, u32 id); + int (*idle_device)(const struct ti_sci_handle *handle, u32 id); + int (*put_device)(const struct ti_sci_handle *handle, u32 id); + int (*is_valid)(const struct ti_sci_handle *handle, u32 id); + int (*get_context_loss_count)(const struct ti_sci_handle *handle, + u32 id, u32 *count); + int (*is_idle)(const struct ti_sci_handle *handle, u32 id, + bool *requested_state); + int (*is_stop)(const struct ti_sci_handle *handle, u32 id, + bool *req_state, bool *current_state); + int (*is_on)(const struct ti_sci_handle *handle, u32 id, + bool *req_state, bool *current_state); + int (*is_transitioning)(const struct ti_sci_handle *handle, u32 id, + bool *current_state); + int (*set_device_resets)(const struct ti_sci_handle *handle, u32 id, + u32 reset_state); + int (*get_device_resets)(const struct ti_sci_handle *handle, u32 id, + u32 *reset_state); +}; + +/** + * struct ti_sci_clk_ops - Clock control operations + * @get_clock: Request for activation of clock and manage by processor + * - needs_ssc: 'true' if Spread Spectrum clock is desired. + * - can_change_freq: 'true' if frequency change is desired. + * - enable_input_term: 'true' if input termination is desired. + * @idle_clock: Request for Idling a clock managed by processor + * @put_clock: Release the clock to be auto managed by TISCI + * @is_auto: Is the clock being auto managed + * - req_state: state indicating if the clock is auto managed + * @is_on: Is the clock ON + * - req_state: if the clock is requested to be forced ON + * - current_state: if the clock is currently ON + * @is_off: Is the clock OFF + * - req_state: if the clock is requested to be forced OFF + * - current_state: if the clock is currently Gated + * @set_parent: Set the clock source of a specific device clock + * - parent_id: Parent clock identifier to set. + * @get_parent: Get the current clock source of a specific device clock + * - parent_id: Parent clock identifier which is the parent. + * @get_num_parents: Get the number of parents of the current clock source + * - num_parents: returns the number of parent clocks. + * @get_best_match_freq: Find a best matching frequency for a frequency + * range. + * - match_freq: Best matching frequency in Hz. + * @set_freq: Set the Clock frequency + * @get_freq: Get the Clock frequency + * - current_freq: Frequency in Hz that the clock is at. + * + * NOTE: for all these functions, the following parameters are generic in + * nature: + * -handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle + * -did: Device identifier this request is for + * -cid: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * -min_freq: The minimum allowable frequency in Hz. This is the minimum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * -target_freq: The target clock frequency in Hz. A frequency will be + * processed as close to this target frequency as possible. + * -max_freq: The maximum allowable frequency in Hz. This is the maximum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * + * Request for the clock - NOTE: the client MUST maintain integrity of + * usage count by balancing get_clock with put_clock. No refcounting is + * managed by driver for that purpose. + */ +struct ti_sci_clk_ops { + int (*get_clock)(const struct ti_sci_handle *handle, u32 did, u8 cid, + bool needs_ssc, bool can_change_freq, + bool enable_input_term); + int (*idle_clock)(const struct ti_sci_handle *handle, u32 did, u8 cid); + int (*put_clock)(const struct ti_sci_handle *handle, u32 did, u8 cid); + int (*is_auto)(const struct ti_sci_handle *handle, u32 did, u8 cid, + bool *req_state); + int (*is_on)(const struct ti_sci_handle *handle, u32 did, u8 cid, + bool *req_state, bool *current_state); + int (*is_off)(const struct ti_sci_handle *handle, u32 did, u8 cid, + bool *req_state, bool *current_state); + int (*set_parent)(const struct ti_sci_handle *handle, u32 did, u8 cid, + u8 parent_id); + int (*get_parent)(const struct ti_sci_handle *handle, u32 did, u8 cid, + u8 *parent_id); + int (*get_num_parents)(const struct ti_sci_handle *handle, u32 did, + u8 cid, u8 *num_parents); + int (*get_best_match_freq)(const struct ti_sci_handle *handle, u32 did, + u8 cid, u64 min_freq, u64 target_freq, + u64 max_freq, u64 *match_freq); + int (*set_freq)(const struct ti_sci_handle *handle, u32 did, u8 cid, + u64 min_freq, u64 target_freq, u64 max_freq); + int (*get_freq)(const struct ti_sci_handle *handle, u32 did, u8 cid, + u64 *current_freq); +}; + +/** + * struct ti_sci_ops - Function support for TI SCI + * @dev_ops: Device specific operations + * @clk_ops: Clock specific operations + */ +struct ti_sci_ops { + struct ti_sci_core_ops core_ops; + struct ti_sci_dev_ops dev_ops; + struct ti_sci_clk_ops clk_ops; +}; + +/** + * struct ti_sci_handle - Handle returned to TI SCI clients for usage. + * @version: structure containing version information + * @ops: operations that are made available to TI SCI clients + */ +struct ti_sci_handle { + struct ti_sci_version_info version; + struct ti_sci_ops ops; +}; + +#if IS_ENABLED(CONFIG_TI_SCI_PROTOCOL) +const struct ti_sci_handle *ti_sci_get_handle(struct device *dev); +int ti_sci_put_handle(const struct ti_sci_handle *handle); +const struct ti_sci_handle *devm_ti_sci_get_handle(struct device *dev); + +#else /* CONFIG_TI_SCI_PROTOCOL */ + +static inline const struct ti_sci_handle *ti_sci_get_handle(struct device *dev) +{ + return ERR_PTR(-EINVAL); +} + +static inline int ti_sci_put_handle(const struct ti_sci_handle *handle) +{ + return -EINVAL; +} + +static inline +const struct ti_sci_handle *devm_ti_sci_get_handle(struct device *dev) +{ + return ERR_PTR(-EINVAL); +} + +#endif /* CONFIG_TI_SCI_PROTOCOL */ + +#endif /* __TISCI_PROTOCOL_H */ |