diff options
Diffstat (limited to 'drivers/tty/serial/Kconfig')
| -rw-r--r-- | drivers/tty/serial/Kconfig | 47 |
1 files changed, 43 insertions, 4 deletions
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 5d9b01aa54f4..64c565945ac3 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -7,6 +7,13 @@ if TTY menu "Serial drivers" depends on HAS_IOMEM +config SERIAL_EARLYCON + bool + help + Support for early consoles with the earlycon parameter. This enables + the console before standard serial driver is probed. The console is + enabled when early_param is processed. + source "drivers/tty/serial/8250/Kconfig" comment "Non-8250 serial port support" @@ -53,6 +60,7 @@ config SERIAL_AMBA_PL011_CONSOLE bool "Support for console on AMBA serial port" depends on SERIAL_AMBA_PL011=y select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON ---help--- Say Y here if you wish to use an AMBA PrimeCell UART as the system console (the system console is the device which receives all kernel @@ -65,6 +73,16 @@ config SERIAL_AMBA_PL011_CONSOLE your boot loader (lilo or loadlin) about how to pass options to the kernel at boot time.) +config SERIAL_EARLYCON_ARM_SEMIHOST + bool "Early console using ARM semihosting" + depends on ARM64 || ARM + select SERIAL_EARLYCON + help + Support for early debug console using ARM semihosting. This enables + the console before standard serial driver is probed. This is enabled + with "earlycon=smh" on the kernel command line. The console is + enabled when early_param is processed. + config SERIAL_SB1250_DUART tristate "BCM1xxx on-chip DUART serial support" depends on SIBYTE_SB1xxx_SOC=y @@ -1160,6 +1178,16 @@ config SERIAL_SCCNXP_CONSOLE help Support for console on SCCNXP serial ports. +config SERIAL_SC16IS7XX + tristate "SC16IS7xx serial support" + depends on I2C + select SERIAL_CORE + select REGMAP_I2C if I2C + help + This selects support for SC16IS7xx serial ports. + Supported ICs are SC16IS740, SC16IS741, SC16IS750, SC16IS752, + SC16IS760 and SC16IS762. + config SERIAL_BFIN_SPORT tristate "Blackfin SPORT emulate UART" depends on BLACKFIN @@ -1369,18 +1397,19 @@ config SERIAL_MXS_AUART_CONSOLE Enable a MXS AUART port to be the system console. config SERIAL_XILINX_PS_UART - tristate "Xilinx PS UART support" + tristate "Cadence (Xilinx Zynq) UART support" depends on OF select SERIAL_CORE help - This driver supports the Xilinx PS UART port. + This driver supports the Cadence UART. It is found e.g. in Xilinx + Zynq. config SERIAL_XILINX_PS_UART_CONSOLE - bool "Xilinx PS UART console support" + bool "Cadence UART console support" depends on SERIAL_XILINX_PS_UART=y select SERIAL_CORE_CONSOLE help - Enable a Xilinx PS UART port to be the system console. + Enable a Cadence UART port to be the system console. config SERIAL_AR933X tristate "AR933X serial port support" @@ -1508,6 +1537,16 @@ config SERIAL_ST_ASC_CONSOLE depends on SERIAL_ST_ASC=y select SERIAL_CORE_CONSOLE +config SERIAL_MEN_Z135 + tristate "MEN 16z135 Support" + depends on MCB + help + Say yes here to enable support for the MEN 16z135 High Speed UART IP-Core + on a MCB carrier. + + This driver can also be build as a module. If so, the module will be called + men_z135_uart.ko + endmenu endif # TTY |