1 files changed, 108 insertions, 0 deletions
diff --git a/drivers/iio/adc/qcom-vadc-common.h b/drivers/iio/adc/qcom-vadc-common.h
new file mode 100644
index 000000000000..63c872a70adc
--- /dev/null
+++ b/drivers/iio/adc/qcom-vadc-common.h
@@ -0,0 +1,108 @@
+/*
+ * Code shared between the different Qualcomm PMIC voltage ADCs
+ */
+
+#ifndef QCOM_VADC_COMMON_H
+#define QCOM_VADC_COMMON_H
+
+#define VADC_CONV_TIME_MIN_US			2000
+#define VADC_CONV_TIME_MAX_US			2100
+
+/* Min ADC code represents 0V */
+#define VADC_MIN_ADC_CODE			0x6000
+/* Max ADC code represents full-scale range of 1.8V */
+#define VADC_MAX_ADC_CODE			0xa800
+
+#define VADC_ABSOLUTE_RANGE_UV			625000
+#define VADC_RATIOMETRIC_RANGE			1800
+
+#define VADC_DEF_PRESCALING			0 /* 1:1 */
+#define VADC_DEF_DECIMATION			0 /* 512 */
+#define VADC_DEF_HW_SETTLE_TIME			0 /* 0 us */
+#define VADC_DEF_AVG_SAMPLES			0 /* 1 sample */
+#define VADC_DEF_CALIB_TYPE			VADC_CALIB_ABSOLUTE
+
+#define VADC_DECIMATION_MIN			512
+#define VADC_DECIMATION_MAX			4096
+
+#define VADC_HW_SETTLE_DELAY_MAX		10000
+#define VADC_AVG_SAMPLES_MAX			512
+
+#define KELVINMIL_CELSIUSMIL			273150
+
+#define PMI_CHG_SCALE_1				-138890
+#define PMI_CHG_SCALE_2				391750000000LL
+
+/**
+ * struct vadc_map_pt - Map the graph representation for ADC channel
+ * @x: Represent the ADC digitized code.
+ * @y: Represent the physical data which can be temperature, voltage,
+ *     resistance.
+ */
+struct vadc_map_pt {
+	s32 x;
+	s32 y;
+};
+
+/*
+ * VADC_CALIB_ABSOLUTE: uses the 625mV and 1.25V as reference channels.
+ * VADC_CALIB_RATIOMETRIC: uses the reference voltage (1.8V) and GND for
+ * calibration.
+ */
+enum vadc_calibration {
+	VADC_CALIB_ABSOLUTE = 0,
+	VADC_CALIB_RATIOMETRIC
+};
+
+/**
+ * struct vadc_linear_graph - Represent ADC characteristics.
+ * @dy: numerator slope to calculate the gain.
+ * @dx: denominator slope to calculate the gain.
+ * @gnd: A/D word of the ground reference used for the channel.
+ *
+ * Each ADC device has different offset and gain parameters which are
+ * computed to calibrate the device.
+ */
+struct vadc_linear_graph {
+	s32 dy;
+	s32 dx;
+	s32 gnd;
+};
+
+/**
+ * struct vadc_prescale_ratio - Represent scaling ratio for ADC input.
+ * @num: the inverse numerator of the gain applied to the input channel.
+ * @den: the inverse denominator of the gain applied to the input channel.
+ */
+struct vadc_prescale_ratio {
+	u32 num;
+	u32 den;
+};
+
+/**
+ * enum vadc_scale_fn_type - Scaling function to convert ADC code to
+ *				physical scaled units for the channel.
+ * SCALE_DEFAULT: Default scaling to convert raw adc code to voltage (uV).
+ * SCALE_THERM_100K_PULLUP: Returns temperature in millidegC.
+ *				 Uses a mapping table with 100K pullup.
+ * SCALE_PMIC_THERM: Returns result in milli degree's Centigrade.
+ * SCALE_XOTHERM: Returns XO thermistor voltage in millidegC.
+ * SCALE_PMI_CHG_TEMP: Conversion for PMI CHG temp
+ */
+enum vadc_scale_fn_type {
+	SCALE_DEFAULT = 0,
+	SCALE_THERM_100K_PULLUP,
+	SCALE_PMIC_THERM,
+	SCALE_XOTHERM,
+	SCALE_PMI_CHG_TEMP,
+};
+
+int qcom_vadc_scale(enum vadc_scale_fn_type scaletype,
+		    const struct vadc_linear_graph *calib_graph,
+		    const struct vadc_prescale_ratio *prescale,
+		    bool absolute,
+		    u16 adc_code, int *result_mdec);
+
+int qcom_vadc_decimation_from_dt(u32 value);
+
+#endif /* QCOM_VADC_COMMON_H */