diff options
Diffstat (limited to 'arch/powerpc')
-rw-r--r-- | arch/powerpc/Kconfig | 4 | ||||
-rw-r--r-- | arch/powerpc/kernel/align.c | 803 | ||||
-rw-r--r-- | arch/powerpc/lib/Makefile | 4 |
3 files changed, 34 insertions, 777 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index bf6abab46dcc..9fc3c0b6dce0 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -367,10 +367,6 @@ config PPC_ADV_DEBUG_DAC_RANGE depends on PPC_ADV_DEBUG_REGS && 44x default y -config PPC_EMULATE_SSTEP - bool - default y if KPROBES || UPROBES || XMON || HAVE_HW_BREAKPOINT - config ZONE_DMA32 bool default y if PPC64 diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c index fd3c1fcc73eb..26b9994d27ee 100644 --- a/arch/powerpc/kernel/align.c +++ b/arch/powerpc/kernel/align.c @@ -27,6 +27,7 @@ #include <asm/switch_to.h> #include <asm/disassemble.h> #include <asm/cpu_has_feature.h> +#include <asm/sstep.h> struct aligninfo { unsigned char len; @@ -40,393 +41,9 @@ struct aligninfo { #define LD 0 /* load */ #define ST 1 /* store */ #define SE 2 /* sign-extend value, or FP ld/st as word */ -#define F 4 /* to/from fp regs */ -#define U 8 /* update index register */ -#define M 0x10 /* multiple load/store */ #define SW 0x20 /* byte swap */ -#define S 0x40 /* single-precision fp or... */ -#define SX 0x40 /* ... byte count in XER */ -#define HARD 0x80 /* string, stwcx. */ #define E4 0x40 /* SPE endianness is word */ #define E8 0x80 /* SPE endianness is double word */ -#define SPLT 0x80 /* VSX SPLAT load */ - -/* DSISR bits reported for a DCBZ instruction: */ -#define DCBZ 0x5f /* 8xx/82xx dcbz faults when cache not enabled */ - -/* - * The PowerPC stores certain bits of the instruction that caused the - * alignment exception in the DSISR register. This array maps those - * bits to information about the operand length and what the - * instruction would do. - */ -static struct aligninfo aligninfo[128] = { - { 4, LD }, /* 00 0 0000: lwz / lwarx */ - INVALID, /* 00 0 0001 */ - { 4, ST }, /* 00 0 0010: stw */ - INVALID, /* 00 0 0011 */ - { 2, LD }, /* 00 0 0100: lhz */ - { 2, LD+SE }, /* 00 0 0101: lha */ - { 2, ST }, /* 00 0 0110: sth */ - { 4, LD+M }, /* 00 0 0111: lmw */ - { 4, LD+F+S }, /* 00 0 1000: lfs */ - { 8, LD+F }, /* 00 0 1001: lfd */ - { 4, ST+F+S }, /* 00 0 1010: stfs */ - { 8, ST+F }, /* 00 0 1011: stfd */ - { 16, LD }, /* 00 0 1100: lq */ - { 8, LD }, /* 00 0 1101: ld/ldu/lwa */ - INVALID, /* 00 0 1110 */ - { 8, ST }, /* 00 0 1111: std/stdu */ - { 4, LD+U }, /* 00 1 0000: lwzu */ - INVALID, /* 00 1 0001 */ - { 4, ST+U }, /* 00 1 0010: stwu */ - INVALID, /* 00 1 0011 */ - { 2, LD+U }, /* 00 1 0100: lhzu */ - { 2, LD+SE+U }, /* 00 1 0101: lhau */ - { 2, ST+U }, /* 00 1 0110: sthu */ - { 4, ST+M }, /* 00 1 0111: stmw */ - { 4, LD+F+S+U }, /* 00 1 1000: lfsu */ - { 8, LD+F+U }, /* 00 1 1001: lfdu */ - { 4, ST+F+S+U }, /* 00 1 1010: stfsu */ - { 8, ST+F+U }, /* 00 1 1011: stfdu */ - { 16, LD+F }, /* 00 1 1100: lfdp */ - INVALID, /* 00 1 1101 */ - { 16, ST+F }, /* 00 1 1110: stfdp */ - INVALID, /* 00 1 1111 */ - { 8, LD }, /* 01 0 0000: ldx */ - INVALID, /* 01 0 0001 */ - { 8, ST }, /* 01 0 0010: stdx */ - INVALID, /* 01 0 0011 */ - INVALID, /* 01 0 0100 */ - { 4, LD+SE }, /* 01 0 0101: lwax */ - INVALID, /* 01 0 0110 */ - INVALID, /* 01 0 0111 */ - { 4, LD+M+HARD+SX }, /* 01 0 1000: lswx */ - { 4, LD+M+HARD }, /* 01 0 1001: lswi */ - { 4, ST+M+HARD+SX }, /* 01 0 1010: stswx */ - { 4, ST+M+HARD }, /* 01 0 1011: stswi */ - INVALID, /* 01 0 1100 */ - { 8, LD+U }, /* 01 0 1101: ldu */ - INVALID, /* 01 0 1110 */ - { 8, ST+U }, /* 01 0 1111: stdu */ - { 8, LD+U }, /* 01 1 0000: ldux */ - INVALID, /* 01 1 0001 */ - { 8, ST+U }, /* 01 1 0010: stdux */ - INVALID, /* 01 1 0011 */ - INVALID, /* 01 1 0100 */ - { 4, LD+SE+U }, /* 01 1 0101: lwaux */ - INVALID, /* 01 1 0110 */ - INVALID, /* 01 1 0111 */ - INVALID, /* 01 1 1000 */ - INVALID, /* 01 1 1001 */ - INVALID, /* 01 1 1010 */ - INVALID, /* 01 1 1011 */ - INVALID, /* 01 1 1100 */ - INVALID, /* 01 1 1101 */ - INVALID, /* 01 1 1110 */ - INVALID, /* 01 1 1111 */ - INVALID, /* 10 0 0000 */ - INVALID, /* 10 0 0001 */ - INVALID, /* 10 0 0010: stwcx. */ - INVALID, /* 10 0 0011 */ - INVALID, /* 10 0 0100 */ - INVALID, /* 10 0 0101 */ - INVALID, /* 10 0 0110 */ - INVALID, /* 10 0 0111 */ - { 4, LD+SW }, /* 10 0 1000: lwbrx */ - INVALID, /* 10 0 1001 */ - { 4, ST+SW }, /* 10 0 1010: stwbrx */ - INVALID, /* 10 0 1011 */ - { 2, LD+SW }, /* 10 0 1100: lhbrx */ - { 4, LD+SE }, /* 10 0 1101 lwa */ - { 2, ST+SW }, /* 10 0 1110: sthbrx */ - { 16, ST }, /* 10 0 1111: stq */ - INVALID, /* 10 1 0000 */ - INVALID, /* 10 1 0001 */ - INVALID, /* 10 1 0010 */ - INVALID, /* 10 1 0011 */ - INVALID, /* 10 1 0100 */ - INVALID, /* 10 1 0101 */ - INVALID, /* 10 1 0110 */ - INVALID, /* 10 1 0111 */ - INVALID, /* 10 1 1000 */ - INVALID, /* 10 1 1001 */ - INVALID, /* 10 1 1010 */ - INVALID, /* 10 1 1011 */ - INVALID, /* 10 1 1100 */ - INVALID, /* 10 1 1101 */ - INVALID, /* 10 1 1110 */ - { 0, ST+HARD }, /* 10 1 1111: dcbz */ - { 4, LD }, /* 11 0 0000: lwzx */ - INVALID, /* 11 0 0001 */ - { 4, ST }, /* 11 0 0010: stwx */ - INVALID, /* 11 0 0011 */ - { 2, LD }, /* 11 0 0100: lhzx */ - { 2, LD+SE }, /* 11 0 0101: lhax */ - { 2, ST }, /* 11 0 0110: sthx */ - INVALID, /* 11 0 0111 */ - { 4, LD+F+S }, /* 11 0 1000: lfsx */ - { 8, LD+F }, /* 11 0 1001: lfdx */ - { 4, ST+F+S }, /* 11 0 1010: stfsx */ - { 8, ST+F }, /* 11 0 1011: stfdx */ - { 16, LD+F }, /* 11 0 1100: lfdpx */ - { 4, LD+F+SE }, /* 11 0 1101: lfiwax */ - { 16, ST+F }, /* 11 0 1110: stfdpx */ - { 4, ST+F }, /* 11 0 1111: stfiwx */ - { 4, LD+U }, /* 11 1 0000: lwzux */ - INVALID, /* 11 1 0001 */ - { 4, ST+U }, /* 11 1 0010: stwux */ - INVALID, /* 11 1 0011 */ - { 2, LD+U }, /* 11 1 0100: lhzux */ - { 2, LD+SE+U }, /* 11 1 0101: lhaux */ - { 2, ST+U }, /* 11 1 0110: sthux */ - INVALID, /* 11 1 0111 */ - { 4, LD+F+S+U }, /* 11 1 1000: lfsux */ - { 8, LD+F+U }, /* 11 1 1001: lfdux */ - { 4, ST+F+S+U }, /* 11 1 1010: stfsux */ - { 8, ST+F+U }, /* 11 1 1011: stfdux */ - INVALID, /* 11 1 1100 */ - { 4, LD+F }, /* 11 1 1101: lfiwzx */ - INVALID, /* 11 1 1110 */ - INVALID, /* 11 1 1111 */ -}; - -/* - * The dcbz (data cache block zero) instruction - * gives an alignment fault if used on non-cacheable - * memory. We handle the fault mainly for the - * case when we are running with the cache disabled - * for debugging. - */ -static int emulate_dcbz(struct pt_regs *regs, unsigned char __user *addr) -{ - long __user *p; - int i, size; - -#ifdef __powerpc64__ - size = ppc64_caches.l1d.block_size; -#else - size = L1_CACHE_BYTES; -#endif - p = (long __user *) (regs->dar & -size); - if (user_mode(regs) && !access_ok(VERIFY_WRITE, p, size)) - return -EFAULT; - for (i = 0; i < size / sizeof(long); ++i) - if (__put_user_inatomic(0, p+i)) - return -EFAULT; - return 1; -} - -/* - * Emulate load & store multiple instructions - * On 64-bit machines, these instructions only affect/use the - * bottom 4 bytes of each register, and the loads clear the - * top 4 bytes of the affected register. - */ -#ifdef __BIG_ENDIAN__ -#ifdef CONFIG_PPC64 -#define REG_BYTE(rp, i) *((u8 *)((rp) + ((i) >> 2)) + ((i) & 3) + 4) -#else -#define REG_BYTE(rp, i) *((u8 *)(rp) + (i)) -#endif -#else -#define REG_BYTE(rp, i) (*(((u8 *)((rp) + ((i)>>2)) + ((i)&3)))) -#endif - -#define SWIZ_PTR(p) ((unsigned char __user *)((p) ^ swiz)) - -#define __get_user_or_set_dar(_regs, _dest, _addr) \ - ({ \ - int rc = 0; \ - typeof(_addr) __addr = (_addr); \ - if (__get_user_inatomic(_dest, __addr)) { \ - _regs->dar = (unsigned long)__addr; \ - rc = -EFAULT; \ - } \ - rc; \ - }) - -#define __put_user_or_set_dar(_regs, _src, _addr) \ - ({ \ - int rc = 0; \ - typeof(_addr) __addr = (_addr); \ - if (__put_user_inatomic(_src, __addr)) { \ - _regs->dar = (unsigned long)__addr; \ - rc = -EFAULT; \ - } \ - rc; \ - }) - -static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr, - unsigned int reg, unsigned int nb, - unsigned int flags, unsigned int instr, - unsigned long swiz) -{ - unsigned long *rptr; - unsigned int nb0, i, bswiz; - unsigned long p; - - /* - * We do not try to emulate 8 bytes multiple as they aren't really - * available in our operating environments and we don't try to - * emulate multiples operations in kernel land as they should never - * be used/generated there at least not on unaligned boundaries - */ - if (unlikely((nb > 4) || !user_mode(regs))) - return 0; - - /* lmw, stmw, lswi/x, stswi/x */ - nb0 = 0; - if (flags & HARD) { - if (flags & SX) { - nb = regs->xer & 127; - if (nb == 0) - return 1; - } else { - unsigned long pc = regs->nip ^ (swiz & 4); - - if (__get_user_or_set_dar(regs, instr, - (unsigned int __user *)pc)) - return -EFAULT; - - if (swiz == 0 && (flags & SW)) - instr = cpu_to_le32(instr); - nb = (instr >> 11) & 0x1f; - if (nb == 0) - nb = 32; - } - if (nb + reg * 4 > 128) { - nb0 = nb + reg * 4 - 128; - nb = 128 - reg * 4; - } -#ifdef __LITTLE_ENDIAN__ - /* - * String instructions are endian neutral but the code - * below is not. Force byte swapping on so that the - * effects of swizzling are undone in the load/store - * loops below. - */ - flags ^= SW; -#endif - } else { - /* lwm, stmw */ - nb = (32 - reg) * 4; - } - - if (!access_ok((flags & ST ? VERIFY_WRITE: VERIFY_READ), addr, nb+nb0)) - return -EFAULT; /* bad address */ - - rptr = ®s->gpr[reg]; - p = (unsigned long) addr; - bswiz = (flags & SW)? 3: 0; - - if (!(flags & ST)) { - /* - * This zeroes the top 4 bytes of the affected registers - * in 64-bit mode, and also zeroes out any remaining - * bytes of the last register for lsw*. - */ - memset(rptr, 0, ((nb + 3) / 4) * sizeof(unsigned long)); - if (nb0 > 0) - memset(®s->gpr[0], 0, - ((nb0 + 3) / 4) * sizeof(unsigned long)); - - for (i = 0; i < nb; ++i, ++p) - if (__get_user_or_set_dar(regs, REG_BYTE(rptr, i ^ bswiz), - SWIZ_PTR(p))) - return -EFAULT; - if (nb0 > 0) { - rptr = ®s->gpr[0]; - addr += nb; - for (i = 0; i < nb0; ++i, ++p) - if (__get_user_or_set_dar(regs, - REG_BYTE(rptr, i ^ bswiz), - SWIZ_PTR(p))) - return -EFAULT; - } - - } else { - for (i = 0; i < nb; ++i, ++p) - if (__put_user_or_set_dar(regs, REG_BYTE(rptr, i ^ bswiz), - SWIZ_PTR(p))) - return -EFAULT; - if (nb0 > 0) { - rptr = ®s->gpr[0]; - addr += nb; - for (i = 0; i < nb0; ++i, ++p) - if (__put_user_or_set_dar(regs, - REG_BYTE(rptr, i ^ bswiz), - SWIZ_PTR(p))) - return -EFAULT; - } - } - return 1; -} - -/* - * Emulate floating-point pair loads and stores. - * Only POWER6 has these instructions, and it does true little-endian, - * so we don't need the address swizzling. - */ -static int emulate_fp_pair(struct pt_regs *regs, unsigned char __user *addr, - unsigned int reg, unsigned int flags) -{ - char *ptr0 = (char *) ¤t->thread.TS_FPR(reg); - char *ptr1 = (char *) ¤t->thread.TS_FPR(reg+1); - int i, sw = 0; - - if (reg & 1) - return 0; /* invalid form: FRS/FRT must be even */ - if (flags & SW) - sw = 7; - - for (i = 0; i < 8; ++i) { - if (!(flags & ST)) { - if (__get_user_or_set_dar(regs, ptr0[i^sw], addr + i)) - return -EFAULT; - if (__get_user_or_set_dar(regs, ptr1[i^sw], addr + i + 8)) - return -EFAULT; - } else { - if (__put_user_or_set_dar(regs, ptr0[i^sw], addr + i)) - return -EFAULT; - if (__put_user_or_set_dar(regs, ptr1[i^sw], addr + i + 8)) - return -EFAULT; - } - } - - return 1; /* exception handled and fixed up */ -} - -#ifdef CONFIG_PPC64 -static int emulate_lq_stq(struct pt_regs *regs, unsigned char __user *addr, - unsigned int reg, unsigned int flags) -{ - char *ptr0 = (char *)®s->gpr[reg]; - char *ptr1 = (char *)®s->gpr[reg+1]; - int i, sw = 0; - - if (reg & 1) - return 0; /* invalid form: GPR must be even */ - if (flags & SW) - sw = 7; - - for (i = 0; i < 8; ++i) { - if (!(flags & ST)) { - if (__get_user_or_set_dar(regs, ptr0[i^sw], addr + i)) - return -EFAULT; - if (__get_user_or_set_dar(regs, ptr1[i^sw], addr + i + 8)) - return -EFAULT; - } else { - if (__put_user_or_set_dar(regs, ptr0[i^sw], addr + i)) - return -EFAULT; - if (__put_user_or_set_dar(regs, ptr1[i^sw], addr + i + 8)) - return -EFAULT; - } - } - - return 1; /* exception handled and fixed up */ -} -#endif /* CONFIG_PPC64 */ #ifdef CONFIG_SPE @@ -665,138 +282,21 @@ static int emulate_spe(struct pt_regs *regs, unsigned int reg, } #endif /* CONFIG_SPE */ -#ifdef CONFIG_VSX -/* - * Emulate VSX instructions... - */ -static int emulate_vsx(unsigned char __user *addr, unsigned int reg, - unsigned int areg, struct pt_regs *regs, - unsigned int flags, unsigned int length, - unsigned int elsize) -{ - char *ptr; - unsigned long *lptr; - int ret = 0; - int sw = 0; - int i, j; - - /* userland only */ - if (unlikely(!user_mode(regs))) - return 0; - - flush_vsx_to_thread(current); - - if (reg < 32) - ptr = (char *) ¤t->thread.fp_state.fpr[reg][0]; - else - ptr = (char *) ¤t->thread.vr_state.vr[reg - 32]; - - lptr = (unsigned long *) ptr; - -#ifdef __LITTLE_ENDIAN__ - if (flags & SW) { - elsize = length; - sw = length-1; - } else { - /* - * The elements are BE ordered, even in LE mode, so process - * them in reverse order. - */ - addr += length - elsize; - - /* 8 byte memory accesses go in the top 8 bytes of the VR */ - if (length == 8) - ptr += 8; - } -#else - if (flags & SW) - sw = elsize-1; -#endif - - for (j = 0; j < length; j += elsize) { - for (i = 0; i < elsize; ++i) { - if (flags & ST) - ret = __put_user_or_set_dar(regs, ptr[i^sw], - addr + i); - else - ret = __get_user_or_set_dar(regs, ptr[i^sw], - addr + i); - - if (ret) - return ret; - } - ptr += elsize; -#ifdef __LITTLE_ENDIAN__ - addr -= elsize; -#else - addr += elsize; -#endif - } - -#ifdef __BIG_ENDIAN__ -#define VSX_HI 0 -#define VSX_LO 1 -#else -#define VSX_HI 1 -#define VSX_LO 0 -#endif - - if (!ret) { - if (flags & U) - regs->gpr[areg] = regs->dar; - - /* Splat load copies the same data to top and bottom 8 bytes */ - if (flags & SPLT) - lptr[VSX_LO] = lptr[VSX_HI]; - /* For 8 byte loads, zero the low 8 bytes */ - else if (!(flags & ST) && (8 == length)) - lptr[VSX_LO] = 0; - } else - return -EFAULT; - - return 1; -} -#endif - /* * Called on alignment exception. Attempts to fixup * * Return 1 on success * Return 0 if unable to handle the interrupt * Return -EFAULT if data address is bad + * Other negative return values indicate that the instruction can't + * be emulated, and the process should be given a SIGBUS. */ int fix_alignment(struct pt_regs *regs) { - unsigned int instr, nb, flags, instruction = 0; - unsigned int reg, areg; - unsigned int dsisr; - unsigned char __user *addr; - unsigned long p, swiz; - int i; - union data { - u64 ll; - double dd; - unsigned char v[8]; - struct { -#ifdef __LITTLE_ENDIAN__ - int low32; - unsigned hi32; -#else - unsigned hi32; - int low32; -#endif - } x32; - struct { -#ifdef __LITTLE_ENDIAN__ - short low16; - unsigned char hi48[6]; -#else - unsigned char hi48[6]; - short low16; -#endif - } x16; - } data; + unsigned int instr; + struct instruction_op op; + int r, type; /* * We require a complete register set, if not, then our assembly @@ -804,121 +304,23 @@ int fix_alignment(struct pt_regs *regs) */ CHECK_FULL_REGS(regs); - dsisr = regs->dsisr; - - /* Some processors don't provide us with a DSISR we can use here, - * let's make one up from the instruction - */ - if (cpu_has_feature(CPU_FTR_NODSISRALIGN)) { - unsigned long pc = regs->nip; - - if (cpu_has_feature(CPU_FTR_PPC_LE) && (regs->msr & MSR_LE)) - pc ^= 4; - if (unlikely(__get_user_inatomic(instr, - (unsigned int __user *)pc))) - return -EFAULT; - if (cpu_has_feature(CPU_FTR_REAL_LE) && (regs->msr & MSR_LE)) - instr = cpu_to_le32(instr); - dsisr = make_dsisr(instr); - instruction = instr; + if (unlikely(__get_user(instr, (unsigned int __user *)regs->nip))) + return -EFAULT; + if ((regs->msr & MSR_LE) != (MSR_KERNEL & MSR_LE)) { + /* We don't handle PPC little-endian any more... */ + if (cpu_has_feature(CPU_FTR_PPC_LE)) + return -EIO; + instr = swab32(instr); } - /* extract the operation and registers from the dsisr */ - reg = (dsisr >> 5) & 0x1f; /* source/dest register */ - areg = dsisr & 0x1f; /* register to update */ - #ifdef CONFIG_SPE if ((instr >> 26) == 0x4) { + int reg = (instr >> 21) & 0x1f; PPC_WARN_ALIGNMENT(spe, regs); return emulate_spe(regs, reg, instr); } #endif - instr = (dsisr >> 10) & 0x7f; - instr |= (dsisr >> 13) & 0x60; - - /* Lookup the operation in our table */ - nb = aligninfo[instr].len; - flags = aligninfo[instr].flags; - - /* - * Handle some cases which give overlaps in the DSISR values. - */ - if (IS_XFORM(instruction)) { - switch (get_xop(instruction)) { - case 532: /* ldbrx */ - nb = 8; - flags = LD+SW; - break; - case 660: /* stdbrx */ - nb = 8; - flags = ST+SW; - break; - case 20: /* lwarx */ - case 84: /* ldarx */ - case 116: /* lharx */ - case 276: /* lqarx */ - return 0; /* not emulated ever */ - } - } - - /* Byteswap little endian loads and stores */ - swiz = 0; - if ((regs->msr & MSR_LE) != (MSR_KERNEL & MSR_LE)) { - flags ^= SW; -#ifdef __BIG_ENDIAN__ - /* - * So-called "PowerPC little endian" mode works by - * swizzling addresses rather than by actually doing - * any byte-swapping. To emulate this, we XOR each - * byte address with 7. We also byte-swap, because - * the processor's address swizzling depends on the - * operand size (it xors the address with 7 for bytes, - * 6 for halfwords, 4 for words, 0 for doublewords) but - * we will xor with 7 and load/store each byte separately. - */ - if (cpu_has_feature(CPU_FTR_PPC_LE)) - swiz = 7; -#endif - } - - /* DAR has the operand effective address */ - addr = (unsigned char __user *)regs->dar; - -#ifdef CONFIG_VSX - if ((instruction & 0xfc00003e) == 0x7c000018) { - unsigned int elsize; - - /* Additional register addressing bit (64 VSX vs 32 FPR/GPR) */ - reg |= (instruction & 0x1) << 5; - /* Simple inline decoder instead of a table */ - /* VSX has only 8 and 16 byte memory accesses */ - nb = 8; - if (instruction & 0x200) - nb = 16; - - /* Vector stores in little-endian mode swap individual - elements, so process them separately */ - elsize = 4; - if (instruction & 0x80) - elsize = 8; - - flags = 0; - if ((regs->msr & MSR_LE) != (MSR_KERNEL & MSR_LE)) - flags |= SW; - if (instruction & 0x100) - flags |= ST; - if (instruction & 0x040) - flags |= U; - /* splat load needs a special decoder */ - if ((instruction & 0x400) == 0){ - flags |= SPLT; - nb = 8; - } - PPC_WARN_ALIGNMENT(vsx, regs); - return emulate_vsx(addr, reg, areg, regs, flags, nb, elsize); - } -#endif /* * ISA 3.0 (such as P9) copy, copy_first, paste and paste_last alignment @@ -930,168 +332,27 @@ int fix_alignment(struct pt_regs *regs) * when pasting to a co-processor. Furthermore, paste_last is the * synchronisation point for preceding copy/paste sequences. */ - if ((instruction & 0xfc0006fe) == PPC_INST_COPY) + if ((instr & 0xfc0006fe) == PPC_INST_COPY) return -EIO; - /* A size of 0 indicates an instruction we don't support, with - * the exception of DCBZ which is handled as a special case here - */ - if (instr == DCBZ) { - PPC_WARN_ALIGNMENT(dcbz, regs); - return emulate_dcbz(regs, addr); - } - if (unlikely(nb == 0)) - return 0; - - /* Load/Store Multiple instructions are handled in their own - * function - */ - if (flags & M) { - PPC_WARN_ALIGNMENT(multiple, regs); - return emulate_multiple(regs, addr, reg, nb, - flags, instr, swiz); - } - - /* Verify the address of the operand */ - if (unlikely(user_mode(regs) && - !access_ok((flags & ST ? VERIFY_WRITE : VERIFY_READ), - addr, nb))) - return -EFAULT; - - /* Force the fprs into the save area so we can reference them */ - if (flags & F) { - /* userland only */ - if (unlikely(!user_mode(regs))) - return 0; - flush_fp_to_thread(current); - } - - if (nb == 16) { - if (flags & F) { - /* Special case for 16-byte FP loads and stores */ - PPC_WARN_ALIGNMENT(fp_pair, regs); - return emulate_fp_pair(regs, addr, reg, flags); - } else { -#ifdef CONFIG_PPC64 - /* Special case for 16-byte loads and stores */ - PPC_WARN_ALIGNMENT(lq_stq, regs); - return emulate_lq_stq(regs, addr, reg, flags); -#else - return 0; -#endif - } - } - - PPC_WARN_ALIGNMENT(unaligned, regs); - - /* If we are loading, get the data from user space, else - * get it from register values - */ - if (!(flags & ST)) { - unsigned int start = 0; - - switch (nb) { - case 4: - start = offsetof(union data, x32.low32); - break; - case 2: - start = offsetof(union data, x16.low16); - break; - } - - data.ll = 0; - p = (unsigned long)addr; - - for (i = 0; i < nb; i++) - if (__get_user_or_set_dar(regs, data.v[start + i], - SWIZ_PTR(p++))) - return -EFAULT; - - } else if (flags & F) { - data.ll = current->thread.TS_FPR(reg); - if (flags & S) { - /* Single-precision FP store requires conversion... */ -#ifdef CONFIG_PPC_FPU - preempt_disable(); - enable_kernel_fp(); - cvt_df(&data.dd, (float *)&data.x32.low32); - disable_kernel_fp(); - preempt_enable(); -#else - return 0; -#endif - } - } else - data.ll = regs->gpr[reg]; - - if (flags & SW) { - switch (nb) { - case 8: - data.ll = swab64(data.ll); - break; - case 4: - data.x32.low32 = swab32(data.x32.low32); - break; - case 2: - data.x16.low16 = swab16(data.x16.low16); - break; - } - } - - /* Perform other misc operations like sign extension - * or floating point single precision conversion - */ - switch (flags & ~(U|SW)) { - case LD+SE: /* sign extending integer loads */ - case LD+F+SE: /* sign extend for lfiwax */ - if ( nb == 2 ) - data.ll = data.x16.low16; - else /* nb must be 4 */ - data.ll = data.x32.low32; - break; + r = analyse_instr(&op, regs, instr); + if (r < 0) + return -EINVAL; - /* Single-precision FP load requires conversion... */ - case LD+F+S: -#ifdef CONFIG_PPC_FPU - preempt_disable(); - enable_kernel_fp(); - cvt_fd((float *)&data.x32.low32, &data.dd); - disable_kernel_fp(); - preempt_enable(); -#else - return 0; -#endif - break; + type = op.type & INSTR_TYPE_MASK; + if (!OP_IS_LOAD_STORE(type)) { + if (type != CACHEOP + DCBZ) + return -EINVAL; + PPC_WARN_ALIGNMENT(dcbz, regs); + r = emulate_dcbz(op.ea, regs); + } else { + if (type == LARX || type == STCX) + return -EIO; + PPC_WARN_ALIGNMENT(unaligned, regs); + r = emulate_loadstore(regs, &op); } - /* Store result to memory or update registers */ - if (flags & ST) { - unsigned int start = 0; - - switch (nb) { - case 4: - start = offsetof(union data, x32.low32); - break; - case 2: - start = offsetof(union data, x16.low16); - break; - } - - p = (unsigned long)addr; - - for (i = 0; i < nb; i++) - if (__put_user_or_set_dar(regs, data.v[start + i], - SWIZ_PTR(p++))) - return -EFAULT; - - } else if (flags & F) - current->thread.TS_FPR(reg) = data.ll; - else - regs->gpr[reg] = data.ll; - - /* Update RA as needed */ - if (flags & U) - regs->gpr[areg] = regs->dar; - - return 1; + if (!r) + return 1; + return r; } diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 400778d7accc..50d5bf954cff 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -31,8 +31,8 @@ obj64-$(CONFIG_KPROBES_SANITY_TEST) += test_emulate_step.o obj-y += checksum_$(BITS).o checksum_wrappers.o -obj-$(CONFIG_PPC_EMULATE_SSTEP) += sstep.o ldstfp.o -obj64-$(CONFIG_PPC_EMULATE_SSTEP) += quad.o +obj-y += sstep.o ldstfp.o quad.o +obj64-y += quad.o obj-$(CONFIG_PPC_LIB_RHEAP) += rheap.o |