diff options
Diffstat (limited to 'arch/mips/include/asm/pmc-sierra')
10 files changed, 346 insertions, 346 deletions
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_cic_int.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_cic_int.h index c84bcf9570b1..ac863e2deb62 100644 --- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_cic_int.h +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_cic_int.h @@ -43,14 +43,14 @@ * IRQs directly forwarded to the CPU */ #define MSP_MIPS_INTBASE 0 -#define MSP_INT_SW0 0 /* IRQ for swint0, C_SW0 */ -#define MSP_INT_SW1 1 /* IRQ for swint1, C_SW1 */ -#define MSP_INT_MAC0 2 /* IRQ for MAC 0, C_IRQ0 */ -#define MSP_INT_MAC1 3 /* IRQ for MAC 1, C_IRQ1 */ -#define MSP_INT_USB 4 /* IRQ for USB, C_IRQ2 */ -#define MSP_INT_SAR 5 /* IRQ for ADSL2+ SAR, C_IRQ3 */ -#define MSP_INT_CIC 6 /* IRQ for CIC block, C_IRQ4 */ -#define MSP_INT_SEC 7 /* IRQ for Sec engine, C_IRQ5 */ +#define MSP_INT_SW0 0 /* IRQ for swint0, C_SW0 */ +#define MSP_INT_SW1 1 /* IRQ for swint1, C_SW1 */ +#define MSP_INT_MAC0 2 /* IRQ for MAC 0, C_IRQ0 */ +#define MSP_INT_MAC1 3 /* IRQ for MAC 1, C_IRQ1 */ +#define MSP_INT_USB 4 /* IRQ for USB, C_IRQ2 */ +#define MSP_INT_SAR 5 /* IRQ for ADSL2+ SAR, C_IRQ3 */ +#define MSP_INT_CIC 6 /* IRQ for CIC block, C_IRQ4 */ +#define MSP_INT_SEC 7 /* IRQ for Sec engine, C_IRQ5 */ /* * IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4) @@ -59,93 +59,93 @@ */ #define MSP_CIC_INTBASE (MSP_MIPS_INTBASE + 8) #define MSP_INT_EXT0 (MSP_CIC_INTBASE + 0) - /* External interrupt 0 */ + /* External interrupt 0 */ #define MSP_INT_EXT1 (MSP_CIC_INTBASE + 1) - /* External interrupt 1 */ + /* External interrupt 1 */ #define MSP_INT_EXT2 (MSP_CIC_INTBASE + 2) - /* External interrupt 2 */ + /* External interrupt 2 */ #define MSP_INT_EXT3 (MSP_CIC_INTBASE + 3) - /* External interrupt 3 */ + /* External interrupt 3 */ #define MSP_INT_CPUIF (MSP_CIC_INTBASE + 4) - /* CPU interface interrupt */ + /* CPU interface interrupt */ #define MSP_INT_EXT4 (MSP_CIC_INTBASE + 5) - /* External interrupt 4 */ + /* External interrupt 4 */ #define MSP_INT_CIC_USB (MSP_CIC_INTBASE + 6) - /* Cascaded IRQ for USB */ + /* Cascaded IRQ for USB */ #define MSP_INT_MBOX (MSP_CIC_INTBASE + 7) - /* Sec engine mailbox IRQ */ + /* Sec engine mailbox IRQ */ #define MSP_INT_EXT5 (MSP_CIC_INTBASE + 8) - /* External interrupt 5 */ + /* External interrupt 5 */ #define MSP_INT_TDM (MSP_CIC_INTBASE + 9) - /* TDM interrupt */ + /* TDM interrupt */ #define MSP_INT_CIC_MAC0 (MSP_CIC_INTBASE + 10) - /* Cascaded IRQ for MAC 0 */ + /* Cascaded IRQ for MAC 0 */ #define MSP_INT_CIC_MAC1 (MSP_CIC_INTBASE + 11) - /* Cascaded IRQ for MAC 1 */ + /* Cascaded IRQ for MAC 1 */ #define MSP_INT_CIC_SEC (MSP_CIC_INTBASE + 12) - /* Cascaded IRQ for sec engine */ -#define MSP_INT_PER (MSP_CIC_INTBASE + 13) - /* Peripheral interrupt */ -#define MSP_INT_TIMER0 (MSP_CIC_INTBASE + 14) - /* SLP timer 0 */ -#define MSP_INT_TIMER1 (MSP_CIC_INTBASE + 15) - /* SLP timer 1 */ -#define MSP_INT_TIMER2 (MSP_CIC_INTBASE + 16) - /* SLP timer 2 */ -#define MSP_INT_VPE0_TIMER (MSP_CIC_INTBASE + 17) - /* VPE0 MIPS timer */ + /* Cascaded IRQ for sec engine */ +#define MSP_INT_PER (MSP_CIC_INTBASE + 13) + /* Peripheral interrupt */ +#define MSP_INT_TIMER0 (MSP_CIC_INTBASE + 14) + /* SLP timer 0 */ +#define MSP_INT_TIMER1 (MSP_CIC_INTBASE + 15) + /* SLP timer 1 */ +#define MSP_INT_TIMER2 (MSP_CIC_INTBASE + 16) + /* SLP timer 2 */ +#define MSP_INT_VPE0_TIMER (MSP_CIC_INTBASE + 17) + /* VPE0 MIPS timer */ #define MSP_INT_BLKCP (MSP_CIC_INTBASE + 18) - /* Block Copy */ + /* Block Copy */ #define MSP_INT_UART0 (MSP_CIC_INTBASE + 19) - /* UART 0 */ + /* UART 0 */ #define MSP_INT_PCI (MSP_CIC_INTBASE + 20) - /* PCI subsystem */ + /* PCI subsystem */ #define MSP_INT_EXT6 (MSP_CIC_INTBASE + 21) - /* External interrupt 5 */ + /* External interrupt 5 */ #define MSP_INT_PCI_MSI (MSP_CIC_INTBASE + 22) - /* PCI Message Signal */ + /* PCI Message Signal */ #define MSP_INT_CIC_SAR (MSP_CIC_INTBASE + 23) - /* Cascaded ADSL2+ SAR IRQ */ + /* Cascaded ADSL2+ SAR IRQ */ #define MSP_INT_DSL (MSP_CIC_INTBASE + 24) - /* ADSL2+ IRQ */ + /* ADSL2+ IRQ */ #define MSP_INT_CIC_ERR (MSP_CIC_INTBASE + 25) - /* SLP error condition */ + /* SLP error condition */ #define MSP_INT_VPE1_TIMER (MSP_CIC_INTBASE + 26) - /* VPE1 MIPS timer */ + /* VPE1 MIPS timer */ #define MSP_INT_VPE0_PC (MSP_CIC_INTBASE + 27) - /* VPE0 Performance counter */ + /* VPE0 Performance counter */ #define MSP_INT_VPE1_PC (MSP_CIC_INTBASE + 28) - /* VPE1 Performance counter */ + /* VPE1 Performance counter */ #define MSP_INT_EXT7 (MSP_CIC_INTBASE + 29) - /* External interrupt 5 */ + /* External interrupt 5 */ #define MSP_INT_VPE0_SW (MSP_CIC_INTBASE + 30) - /* VPE0 Software interrupt */ + /* VPE0 Software interrupt */ #define MSP_INT_VPE1_SW (MSP_CIC_INTBASE + 31) - /* VPE0 Software interrupt */ + /* VPE0 Software interrupt */ /* * IRQs cascaded on CIC PER interrupt (MSP_INT_PER) */ #define MSP_PER_INTBASE (MSP_CIC_INTBASE + 32) -/* Reserved 0-1 */ +/* Reserved 0-1 */ #define MSP_INT_UART1 (MSP_PER_INTBASE + 2) - /* UART 1 */ -/* Reserved 3-5 */ + /* UART 1 */ +/* Reserved 3-5 */ #define MSP_INT_2WIRE (MSP_PER_INTBASE + 6) - /* 2-wire */ + /* 2-wire */ #define MSP_INT_TM0 (MSP_PER_INTBASE + 7) /* Peripheral timer block out 0 */ #define MSP_INT_TM1 (MSP_PER_INTBASE + 8) /* Peripheral timer block out 1 */ -/* Reserved 9 */ +/* Reserved 9 */ #define MSP_INT_SPRX (MSP_PER_INTBASE + 10) - /* SPI RX complete */ + /* SPI RX complete */ #define MSP_INT_SPTX (MSP_PER_INTBASE + 11) - /* SPI TX complete */ + /* SPI TX complete */ #define MSP_INT_GPIO (MSP_PER_INTBASE + 12) - /* GPIO */ + /* GPIO */ #define MSP_INT_PER_ERR (MSP_PER_INTBASE + 13) - /* Peripheral error */ -/* Reserved 14-31 */ + /* Peripheral error */ +/* Reserved 14-31 */ #endif /* !_MSP_CIC_INT_H */ diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_gpio_macros.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_gpio_macros.h index 156f320c69e7..daacebb047c2 100644 --- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_gpio_macros.h +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_gpio_macros.h @@ -54,7 +54,7 @@ enum msp_gpio_mode { MSP_GPIO_UART_OUTPUT = 0x9, /* Only GPIO 2 or 3 */ MSP_GPIO_PERIF_TIMERA = 0x9, /* Only GPIO 0 or 1 */ MSP_GPIO_PERIF_TIMERB = 0xa, /* Only GPIO 0 or 1 */ - MSP_GPIO_UNKNOWN = 0xb, /* No such GPIO or mode */ + MSP_GPIO_UNKNOWN = 0xb, /* No such GPIO or mode */ }; /* -- Static Tables -- */ @@ -148,7 +148,7 @@ static unsigned int MSP_GPIO_MODE_ALLOWED[] = { BASIC_MODE_REG_VALUE(mode, OFFSET_GPIO_NUMBER(gpio)) #define BASIC_MODE_SHIFT(gpio) \ BASIC_MODE_REG_SHIFT(OFFSET_GPIO_NUMBER(gpio)) -#define BASIC_MODE_FROM_REG(data, gpio) \ +#define BASIC_MODE_FROM_REG(data, gpio) \ BASIC_MODE_REG_FROM_REG(data, OFFSET_GPIO_NUMBER(gpio)) /* diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_int.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_int.h index 1d9f05474820..29f8bf79d7a5 100644 --- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_int.h +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_int.h @@ -1,7 +1,7 @@ /* * Defines for the MSP interrupt handlers. * - * Copyright (C) 2005, PMC-Sierra, Inc. All rights reserved. + * Copyright (C) 2005, PMC-Sierra, Inc. All rights reserved. * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com * * ######################################################################## @@ -28,7 +28,7 @@ /* * The PMC-Sierra MSP product line has at least two different interrupt * controllers, the SLP register based scheme and the CIC interrupt - * controller block mechanism. This file distinguishes between them + * controller block mechanism. This file distinguishes between them * so that devices see a uniform interface. */ diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_pci.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_pci.h index 415606903617..24948cc42461 100644 --- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_pci.h +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_pci.h @@ -26,7 +26,7 @@ #ifndef _MSP_PCI_H_ #define _MSP_PCI_H_ -#define MSP_HAS_PCI(ID) (((u32)(ID) <= 0x4236) && ((u32)(ID) >= 0x4220)) +#define MSP_HAS_PCI(ID) (((u32)(ID) <= 0x4236) && ((u32)(ID) >= 0x4220)) /* * It is convenient to program the OATRAN register so that @@ -96,24 +96,24 @@ enum config_status_command, /* 1 */ config_class_revision, /* 2 */ config_BIST_header_latency_cache, /* 3 */ - config_BAR0, /* 4 */ - config_BAR1, /* 5 */ - config_BAR2, /* 6 */ - config_not_used7, /* 7 */ - config_not_used8, /* 8 */ - config_not_used9, /* 9 */ - config_CIS, /* 10 */ - config_subsystem, /* 11 */ - config_not_used12, /* 12 */ + config_BAR0, /* 4 */ + config_BAR1, /* 5 */ + config_BAR2, /* 6 */ + config_not_used7, /* 7 */ + config_not_used8, /* 8 */ + config_not_used9, /* 9 */ + config_CIS, /* 10 */ + config_subsystem, /* 11 */ + config_not_used12, /* 12 */ config_capabilities, /* 13 */ - config_not_used14, /* 14 */ + config_not_used14, /* 14 */ config_lat_grant_irq, /* 15 */ config_message_control,/* 16 */ config_message_addr, /* 17 */ config_message_data, /* 18 */ - config_VPD_addr, /* 19 */ - config_VPD_data, /* 20 */ - config_maxregs /* 21 - number of registers */ + config_VPD_addr, /* 19 */ + config_VPD_data, /* 20 */ + config_maxregs /* 21 - number of registers */ }; struct msp_pci_regs @@ -132,15 +132,15 @@ struct msp_pci_regs pcireg hop_unused_2C; /* +0x2C */ pcireg hop_unused_30; /* +0x30 */ pcireg hop_unused_34; /* +0x34 */ - pcireg if_control; /* +0x38 */ - pcireg oatran; /* +0x3C */ - pcireg reset_ctl; /* +0x40 */ - pcireg config_addr; /* +0x44 */ + pcireg if_control; /* +0x38 */ + pcireg oatran; /* +0x3C */ + pcireg reset_ctl; /* +0x40 */ + pcireg config_addr; /* +0x44 */ pcireg hop_unused_48; /* +0x48 */ pcireg msg_signaled_int_status; /* +0x4C */ pcireg msg_signaled_int_mask; /* +0x50 */ - pcireg if_status; /* +0x54 */ - pcireg if_mask; /* +0x58 */ + pcireg if_status; /* +0x54 */ + pcireg if_mask; /* +0x58 */ pcireg hop_unused_5C; /* +0x5C */ pcireg hop_unused_60; /* +0x60 */ pcireg hop_unused_64; /* +0x64 */ @@ -190,9 +190,9 @@ struct msp_pci_regs #define BPCI_IFSTATUS_PEI (1<<30) /* Parity error as initiator */ #define BPCI_IFSTATUS_PET (1<<31) /* Parity error as target */ -#define BPCI_RESETCTL_PR (1<<0) /* True if reset asserted */ -#define BPCI_RESETCTL_RT (1<<4) /* Release time */ -#define BPCI_RESETCTL_CT (1<<8) /* Config time */ +#define BPCI_RESETCTL_PR (1<<0) /* True if reset asserted */ +#define BPCI_RESETCTL_RT (1<<4) /* Release time */ +#define BPCI_RESETCTL_CT (1<<8) /* Config time */ #define BPCI_RESETCTL_PE (1<<12) /* PCI enabled */ #define BPCI_RESETCTL_HM (1<<13) /* PCI host mode */ #define BPCI_RESETCTL_RI (1<<14) /* PCI reset in */ diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h index 786d82daf8d6..4d3052ab89a2 100644 --- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h @@ -40,7 +40,7 @@ (((revision >= 0xb0) && (revision < 0xd0))) #define FPGA_IS_5000(revision) \ ((revision >= 0x80) && (revision <= 0x90)) -#define FPGA_IS_ZEUS(revision) ((revision < 0x7f)) +#define FPGA_IS_ZEUS(revision) ((revision < 0x7f)) #define FPGA_IS_DUET(revision) \ (((revision >= 0xa0) && (revision < 0xb0))) #define FPGA_IS_MSP4200(revision) ((revision >= 0xd0)) @@ -48,7 +48,7 @@ #define MACHINE_TYPE_POLO "POLO" #define MACHINE_TYPE_DUET "DUET" -#define MACHINE_TYPE_ZEUS "ZEUS" +#define MACHINE_TYPE_ZEUS "ZEUS" #define MACHINE_TYPE_MSP2000REVB "MSP2000REVB" #define MACHINE_TYPE_MSP5000 "MSP5000" #define MACHINE_TYPE_MSP4200 "MSP4200" @@ -58,7 +58,7 @@ #define MACHINE_TYPE_POLO_FPGA "POLO-FPGA" #define MACHINE_TYPE_DUET_FPGA "DUET-FPGA" -#define MACHINE_TYPE_ZEUS_FPGA "ZEUS_FPGA" +#define MACHINE_TYPE_ZEUS_FPGA "ZEUS_FPGA" #define MACHINE_TYPE_MSP2000REVB_FPGA "MSP2000REVB-FPGA" #define MACHINE_TYPE_MSP5000_FPGA "MSP5000-FPGA" #define MACHINE_TYPE_MSP4200_FPGA "MSP4200-FPGA" @@ -95,7 +95,7 @@ #define ENET_MII 'M' #define ENET_RMII 'R' -#define ENETTXD_FALLING 'F' +#define ENETTXD_FALLING 'F' #define ENETTXD_RISING 'R' #define PCI_HOST 'H' diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h index 7d41474e5488..2dbc7a8cec1a 100644 --- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h @@ -233,4 +233,4 @@ static inline u32 blocking_read_reg32(volatile u32 *const addr) : "=&r" (tmp), "=m" (*address) \ : "0" (tmp), "m" (*address)) -#endif /* __ASM_REGOPS_H__ */ +#endif /* __ASM_REGOPS_H__ */ diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regs.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regs.h index 692c1b658b92..da3a8dea2282 100644 --- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regs.h +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regs.h @@ -37,13 +37,13 @@ /* ######################################################################## - # Address space and device base definitions # + # Address space and device base definitions # ######################################################################## */ /* *************************************************************************** - * System Logic and Peripherals (ELB, UART0, etc) device address space * + * System Logic and Peripherals (ELB, UART0, etc) device address space * *************************************************************************** */ #define MSP_SLP_BASE 0x1c000000 @@ -53,69 +53,69 @@ #define MSP_RST_SIZE 0x0C /* System reset register space */ #define MSP_WTIMER_BASE (MSP_SLP_BASE + 0x04C) - /* watchdog timer base */ + /* watchdog timer base */ #define MSP_ITIMER_BASE (MSP_SLP_BASE + 0x054) - /* internal timer base */ + /* internal timer base */ #define MSP_UART0_BASE (MSP_SLP_BASE + 0x100) - /* UART0 controller base */ + /* UART0 controller base */ #define MSP_BCPY_CTRL_BASE (MSP_SLP_BASE + 0x120) - /* Block Copy controller base */ + /* Block Copy controller base */ #define MSP_BCPY_DESC_BASE (MSP_SLP_BASE + 0x160) - /* Block Copy descriptor base */ + /* Block Copy descriptor base */ /* *************************************************************************** - * PCI address space * + * PCI address space * *************************************************************************** */ #define MSP_PCI_BASE 0x19000000 /* *************************************************************************** - * MSbus device address space * + * MSbus device address space * *************************************************************************** */ #define MSP_MSB_BASE 0x18000000 - /* MSbus address start */ + /* MSbus address start */ #define MSP_PER_BASE (MSP_MSB_BASE + 0x400000) - /* Peripheral device registers */ + /* Peripheral device registers */ #define MSP_MAC0_BASE (MSP_MSB_BASE + 0x600000) - /* MAC A device registers */ + /* MAC A device registers */ #define MSP_MAC1_BASE (MSP_MSB_BASE + 0x700000) - /* MAC B device registers */ + /* MAC B device registers */ #define MSP_MAC_SIZE 0xE0 /* MAC register space */ #define MSP_SEC_BASE (MSP_MSB_BASE + 0x800000) - /* Security Engine registers */ + /* Security Engine registers */ #define MSP_MAC2_BASE (MSP_MSB_BASE + 0x900000) - /* MAC C device registers */ + /* MAC C device registers */ #define MSP_ADSL2_BASE (MSP_MSB_BASE + 0xA80000) - /* ADSL2 device registers */ + /* ADSL2 device registers */ #define MSP_USB0_BASE (MSP_MSB_BASE + 0xB00000) - /* USB0 device registers */ + /* USB0 device registers */ #define MSP_USB1_BASE (MSP_MSB_BASE + 0x300000) /* USB1 device registers */ #define MSP_CPUIF_BASE (MSP_MSB_BASE + 0xC00000) - /* CPU interface registers */ + /* CPU interface registers */ /* Devices within the MSbus peripheral block */ #define MSP_UART1_BASE (MSP_PER_BASE + 0x030) - /* UART1 controller base */ + /* UART1 controller base */ #define MSP_SPI_BASE (MSP_PER_BASE + 0x058) - /* SPI/MPI control registers */ + /* SPI/MPI control registers */ #define MSP_TWI_BASE (MSP_PER_BASE + 0x090) - /* Two-wire control registers */ + /* Two-wire control registers */ #define MSP_PTIMER_BASE (MSP_PER_BASE + 0x0F0) - /* Programmable timer control */ + /* Programmable timer control */ /* *************************************************************************** - * Physical Memory configuration address space * + * Physical Memory configuration address space * *************************************************************************** */ #define MSP_MEM_CFG_BASE 0x17f00000 -#define MSP_MEM_INDIRECT_CTL_10 0x10 +#define MSP_MEM_INDIRECT_CTL_10 0x10 /* * Notes: @@ -130,10 +130,10 @@ * 3) These constants are for physical addresses which means that they * work correctly with "ioremap" and friends. This means that device * drivers will need to remap these addresses using ioremap and perhaps - * the readw/writew macros. Or they could use the regptr() macro + * the readw/writew macros. Or they could use the regptr() macro * defined below, but the readw/writew calls are the correct thing. * 4) The UARTs have an additional status register offset from the base - * address. This register isn't used in the standard 8250 driver but + * address. This register isn't used in the standard 8250 driver but * may be used in other software. Consult the hardware datasheet for * offset details. * 5) For some unknown reason the security engine (MSP_SEC_BASE) registers @@ -163,44 +163,44 @@ /* *************************************************************************** - * System Logic and Peripherals (RESET, ELB, etc) registers * + * System Logic and Peripherals (RESET, ELB, etc) registers * *************************************************************************** */ /* System Control register definitions */ -#define DEV_ID_REG regptr(MSP_SLP_BASE + 0x00) - /* Device-ID RO */ -#define FWR_ID_REG regptr(MSP_SLP_BASE + 0x04) - /* Firmware-ID Register RW */ -#define SYS_ID_REG0 regptr(MSP_SLP_BASE + 0x08) - /* System-ID Register-0 RW */ -#define SYS_ID_REG1 regptr(MSP_SLP_BASE + 0x0C) - /* System-ID Register-1 RW */ +#define DEV_ID_REG regptr(MSP_SLP_BASE + 0x00) + /* Device-ID RO */ +#define FWR_ID_REG regptr(MSP_SLP_BASE + 0x04) + /* Firmware-ID Register RW */ +#define SYS_ID_REG0 regptr(MSP_SLP_BASE + 0x08) + /* System-ID Register-0 RW */ +#define SYS_ID_REG1 regptr(MSP_SLP_BASE + 0x0C) + /* System-ID Register-1 RW */ /* System Reset register definitions */ -#define RST_STS_REG regptr(MSP_SLP_BASE + 0x10) - /* System Reset Status RO */ -#define RST_SET_REG regptr(MSP_SLP_BASE + 0x14) - /* System Set Reset WO */ -#define RST_CLR_REG regptr(MSP_SLP_BASE + 0x18) - /* System Clear Reset WO */ +#define RST_STS_REG regptr(MSP_SLP_BASE + 0x10) + /* System Reset Status RO */ +#define RST_SET_REG regptr(MSP_SLP_BASE + 0x14) + /* System Set Reset WO */ +#define RST_CLR_REG regptr(MSP_SLP_BASE + 0x18) + /* System Clear Reset WO */ /* System Clock Registers */ #define PCI_SLP_REG regptr(MSP_SLP_BASE + 0x1C) - /* PCI clock generator RW */ + /* PCI clock generator RW */ #define URT_SLP_REG regptr(MSP_SLP_BASE + 0x20) - /* UART clock generator RW */ -/* reserved (MSP_SLP_BASE + 0x24) */ -/* reserved (MSP_SLP_BASE + 0x28) */ + /* UART clock generator RW */ +/* reserved (MSP_SLP_BASE + 0x24) */ +/* reserved (MSP_SLP_BASE + 0x28) */ #define PLL1_SLP_REG regptr(MSP_SLP_BASE + 0x2C) - /* PLL1 clock generator RW */ + /* PLL1 clock generator RW */ #define PLL0_SLP_REG regptr(MSP_SLP_BASE + 0x30) - /* PLL0 clock generator RW */ + /* PLL0 clock generator RW */ #define MIPS_SLP_REG regptr(MSP_SLP_BASE + 0x34) - /* MIPS clock generator RW */ -#define VE_SLP_REG regptr(MSP_SLP_BASE + 0x38) + /* MIPS clock generator RW */ +#define VE_SLP_REG regptr(MSP_SLP_BASE + 0x38) /* Voice Eng clock generator RW */ -/* reserved (MSP_SLP_BASE + 0x3C) */ +/* reserved (MSP_SLP_BASE + 0x3C) */ #define MSB_SLP_REG regptr(MSP_SLP_BASE + 0x40) /* MS-Bus clock generator RW */ #define SMAC_SLP_REG regptr(MSP_SLP_BASE + 0x44) @@ -216,108 +216,108 @@ #define SE_MBOX_REG regptr(MSP_SLP_BASE + 0x78) /* Security Engine mailbox RW */ #define VE_MBOX_REG regptr(MSP_SLP_BASE + 0x7C) - /* Voice Engine mailbox RW */ + /* Voice Engine mailbox RW */ /* ELB Controller Registers */ #define CS0_CNFG_REG regptr(MSP_SLP_BASE + 0x80) - /* ELB CS0 Configuration Reg */ + /* ELB CS0 Configuration Reg */ #define CS0_ADDR_REG regptr(MSP_SLP_BASE + 0x84) - /* ELB CS0 Base Address Reg */ + /* ELB CS0 Base Address Reg */ #define CS0_MASK_REG regptr(MSP_SLP_BASE + 0x88) - /* ELB CS0 Mask Register */ + /* ELB CS0 Mask Register */ #define CS0_ACCESS_REG regptr(MSP_SLP_BASE + 0x8C) - /* ELB CS0 access register */ + /* ELB CS0 access register */ #define CS1_CNFG_REG regptr(MSP_SLP_BASE + 0x90) - /* ELB CS1 Configuration Reg */ + /* ELB CS1 Configuration Reg */ #define CS1_ADDR_REG regptr(MSP_SLP_BASE + 0x94) - /* ELB CS1 Base Address Reg */ + /* ELB CS1 Base Address Reg */ #define CS1_MASK_REG regptr(MSP_SLP_BASE + 0x98) - /* ELB CS1 Mask Register */ + /* ELB CS1 Mask Register */ #define CS1_ACCESS_REG regptr(MSP_SLP_BASE + 0x9C) - /* ELB CS1 access register */ + /* ELB CS1 access register */ #define CS2_CNFG_REG regptr(MSP_SLP_BASE + 0xA0) - /* ELB CS2 Configuration Reg */ + /* ELB CS2 Configuration Reg */ #define CS2_ADDR_REG regptr(MSP_SLP_BASE + 0xA4) - /* ELB CS2 Base Address Reg */ + /* ELB CS2 Base Address Reg */ #define CS2_MASK_REG regptr(MSP_SLP_BASE + 0xA8) - /* ELB CS2 Mask Register */ + /* ELB CS2 Mask Register */ #define CS2_ACCESS_REG regptr(MSP_SLP_BASE + 0xAC) - /* ELB CS2 access register */ + /* ELB CS2 access register */ #define CS3_CNFG_REG regptr(MSP_SLP_BASE + 0xB0) - /* ELB CS3 Configuration Reg */ + /* ELB CS3 Configuration Reg */ #define CS3_ADDR_REG regptr(MSP_SLP_BASE + 0xB4) - /* ELB CS3 Base Address Reg */ + /* ELB CS3 Base Address Reg */ #define CS3_MASK_REG regptr(MSP_SLP_BASE + 0xB8) - /* ELB CS3 Mask Register */ + /* ELB CS3 Mask Register */ #define CS3_ACCESS_REG regptr(MSP_SLP_BASE + 0xBC) - /* ELB CS3 access register */ + /* ELB CS3 access register */ #define CS4_CNFG_REG regptr(MSP_SLP_BASE + 0xC0) - /* ELB CS4 Configuration Reg */ + /* ELB CS4 Configuration Reg */ #define CS4_ADDR_REG regptr(MSP_SLP_BASE + 0xC4) - /* ELB CS4 Base Address Reg */ + /* ELB CS4 Base Address Reg */ #define CS4_MASK_REG regptr(MSP_SLP_BASE + 0xC8) - /* ELB CS4 Mask Register */ + /* ELB CS4 Mask Register */ #define CS4_ACCESS_REG regptr(MSP_SLP_BASE + 0xCC) - /* ELB CS4 access register */ + /* ELB CS4 access register */ #define CS5_CNFG_REG regptr(MSP_SLP_BASE + 0xD0) - /* ELB CS5 Configuration Reg */ + /* ELB CS5 Configuration Reg */ #define CS5_ADDR_REG regptr(MSP_SLP_BASE + 0xD4) - /* ELB CS5 Base Address Reg */ + /* ELB CS5 Base Address Reg */ #define CS5_MASK_REG regptr(MSP_SLP_BASE + 0xD8) - /* ELB CS5 Mask Register */ + /* ELB CS5 Mask Register */ #define CS5_ACCESS_REG regptr(MSP_SLP_BASE + 0xDC) - /* ELB CS5 access register */ + /* ELB CS5 access register */ -/* reserved 0xE0 - 0xE8 */ +/* reserved 0xE0 - 0xE8 */ #define ELB_1PC_EN_REG regptr(MSP_SLP_BASE + 0xEC) - /* ELB single PC card detect */ + /* ELB single PC card detect */ -/* reserved 0xF0 - 0xF8 */ -#define ELB_CLK_CFG_REG regptr(MSP_SLP_BASE + 0xFC) - /* SDRAM read/ELB timing Reg */ +/* reserved 0xF0 - 0xF8 */ +#define ELB_CLK_CFG_REG regptr(MSP_SLP_BASE + 0xFC) + /* SDRAM read/ELB timing Reg */ /* Extended UART status registers */ #define UART0_STATUS_REG regptr(MSP_UART0_BASE + 0x0c0) - /* UART Status Register 0 */ + /* UART Status Register 0 */ #define UART1_STATUS_REG regptr(MSP_UART1_BASE + 0x170) - /* UART Status Register 1 */ + /* UART Status Register 1 */ /* Performance monitoring registers */ #define PERF_MON_CTRL_REG regptr(MSP_SLP_BASE + 0x140) - /* Performance monitor control */ + /* Performance monitor control */ #define PERF_MON_CLR_REG regptr(MSP_SLP_BASE + 0x144) - /* Performance monitor clear */ + /* Performance monitor clear */ #define PERF_MON_CNTH_REG regptr(MSP_SLP_BASE + 0x148) - /* Perf monitor counter high */ + /* Perf monitor counter high */ #define PERF_MON_CNTL_REG regptr(MSP_SLP_BASE + 0x14C) - /* Perf monitor counter low */ + /* Perf monitor counter low */ /* System control registers */ #define SYS_CTRL_REG regptr(MSP_SLP_BASE + 0x150) - /* System control register */ + /* System control register */ #define SYS_ERR1_REG regptr(MSP_SLP_BASE + 0x154) - /* System Error status 1 */ + /* System Error status 1 */ #define SYS_ERR2_REG regptr(MSP_SLP_BASE + 0x158) - /* System Error status 2 */ + /* System Error status 2 */ #define SYS_INT_CFG_REG regptr(MSP_SLP_BASE + 0x15C) - /* System Interrupt config */ + /* System Interrupt config */ /* Voice Engine Memory configuration */ #define VE_MEM_REG regptr(MSP_SLP_BASE + 0x17C) - /* Voice engine memory config */ + /* Voice engine memory config */ /* CPU/SLP Error Status registers */ #define CPU_ERR1_REG regptr(MSP_SLP_BASE + 0x180) - /* CPU/SLP Error status 1 */ + /* CPU/SLP Error status 1 */ #define CPU_ERR2_REG regptr(MSP_SLP_BASE + 0x184) - /* CPU/SLP Error status 1 */ + /* CPU/SLP Error status 1 */ -/* Extended GPIO registers */ +/* Extended GPIO registers */ #define EXTENDED_GPIO1_REG regptr(MSP_SLP_BASE + 0x188) #define EXTENDED_GPIO2_REG regptr(MSP_SLP_BASE + 0x18c) #define EXTENDED_GPIO_REG EXTENDED_GPIO1_REG @@ -325,182 +325,182 @@ /* System Error registers */ #define SLP_ERR_STS_REG regptr(MSP_SLP_BASE + 0x190) - /* Int status for SLP errors */ + /* Int status for SLP errors */ #define SLP_ERR_MSK_REG regptr(MSP_SLP_BASE + 0x194) - /* Int mask for SLP errors */ + /* Int mask for SLP errors */ #define SLP_ELB_ERST_REG regptr(MSP_SLP_BASE + 0x198) - /* External ELB reset */ + /* External ELB reset */ #define SLP_BOOT_STS_REG regptr(MSP_SLP_BASE + 0x19C) - /* Boot Status */ + /* Boot Status */ /* Extended ELB addressing */ #define CS0_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A0) - /* CS0 Extended address */ + /* CS0 Extended address */ #define CS1_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A4) - /* CS1 Extended address */ + /* CS1 Extended address */ #define CS2_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A8) - /* CS2 Extended address */ + /* CS2 Extended address */ #define CS3_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1AC) - /* CS3 Extended address */ -/* reserved 0x1B0 */ + /* CS3 Extended address */ +/* reserved 0x1B0 */ #define CS5_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1B4) - /* CS5 Extended address */ + /* CS5 Extended address */ /* PLL Adjustment registers */ #define PLL_LOCK_REG regptr(MSP_SLP_BASE + 0x200) - /* PLL0 lock status */ + /* PLL0 lock status */ #define PLL_ARST_REG regptr(MSP_SLP_BASE + 0x204) - /* PLL Analog reset status */ + /* PLL Analog reset status */ #define PLL0_ADJ_REG regptr(MSP_SLP_BASE + 0x208) - /* PLL0 Adjustment value */ + /* PLL0 Adjustment value */ #define PLL1_ADJ_REG regptr(MSP_SLP_BASE + 0x20C) - /* PLL1 Adjustment value */ + /* PLL1 Adjustment value */ /* *************************************************************************** - * Peripheral Register definitions * + * Peripheral Register definitions * *************************************************************************** */ /* Peripheral status */ #define PER_CTRL_REG regptr(MSP_PER_BASE + 0x50) - /* Peripheral control register */ + /* Peripheral control register */ #define PER_STS_REG regptr(MSP_PER_BASE + 0x54) - /* Peripheral status register */ + /* Peripheral status register */ /* SPI/MPI Registers */ #define SMPI_TX_SZ_REG regptr(MSP_PER_BASE + 0x58) - /* SPI/MPI Tx Size register */ + /* SPI/MPI Tx Size register */ #define SMPI_RX_SZ_REG regptr(MSP_PER_BASE + 0x5C) - /* SPI/MPI Rx Size register */ + /* SPI/MPI Rx Size register */ #define SMPI_CTL_REG regptr(MSP_PER_BASE + 0x60) - /* SPI/MPI Control register */ + /* SPI/MPI Control register */ #define SMPI_MS_REG regptr(MSP_PER_BASE + 0x64) - /* SPI/MPI Chip Select reg */ + /* SPI/MPI Chip Select reg */ #define SMPI_CORE_DATA_REG regptr(MSP_PER_BASE + 0xC0) - /* SPI/MPI Core Data reg */ + /* SPI/MPI Core Data reg */ #define SMPI_CORE_CTRL_REG regptr(MSP_PER_BASE + 0xC4) - /* SPI/MPI Core Control reg */ + /* SPI/MPI Core Control reg */ #define SMPI_CORE_STAT_REG regptr(MSP_PER_BASE + 0xC8) - /* SPI/MPI Core Status reg */ + /* SPI/MPI Core Status reg */ #define SMPI_CORE_SSEL_REG regptr(MSP_PER_BASE + 0xCC) - /* SPI/MPI Core Ssel reg */ + /* SPI/MPI Core Ssel reg */ #define SMPI_FIFO_REG regptr(MSP_PER_BASE + 0xD0) - /* SPI/MPI Data FIFO reg */ + /* SPI/MPI Data FIFO reg */ -/* Peripheral Block Error Registers */ +/* Peripheral Block Error Registers */ #define PER_ERR_STS_REG regptr(MSP_PER_BASE + 0x70) - /* Error Bit Status Register */ + /* Error Bit Status Register */ #define PER_ERR_MSK_REG regptr(MSP_PER_BASE + 0x74) - /* Error Bit Mask Register */ + /* Error Bit Mask Register */ #define PER_HDR1_REG regptr(MSP_PER_BASE + 0x78) - /* Error Header 1 Register */ + /* Error Header 1 Register */ #define PER_HDR2_REG regptr(MSP_PER_BASE + 0x7C) - /* Error Header 2 Register */ + /* Error Header 2 Register */ -/* Peripheral Block Interrupt Registers */ +/* Peripheral Block Interrupt Registers */ #define PER_INT_STS_REG regptr(MSP_PER_BASE + 0x80) - /* Interrupt status register */ + /* Interrupt status register */ #define PER_INT_MSK_REG regptr(MSP_PER_BASE + 0x84) - /* Interrupt Mask Register */ + /* Interrupt Mask Register */ #define GPIO_INT_STS_REG regptr(MSP_PER_BASE + 0x88) - /* GPIO interrupt status reg */ + /* GPIO interrupt status reg */ #define GPIO_INT_MSK_REG regptr(MSP_PER_BASE + 0x8C) - /* GPIO interrupt MASK Reg */ + /* GPIO interrupt MASK Reg */ -/* POLO GPIO registers */ +/* POLO GPIO registers */ #define POLO_GPIO_DAT1_REG regptr(MSP_PER_BASE + 0x0E0) - /* Polo GPIO[8:0] data reg */ + /* Polo GPIO[8:0] data reg */ #define POLO_GPIO_CFG1_REG regptr(MSP_PER_BASE + 0x0E4) - /* Polo GPIO[7:0] config reg */ + /* Polo GPIO[7:0] config reg */ #define POLO_GPIO_CFG2_REG regptr(MSP_PER_BASE + 0x0E8) - /* Polo GPIO[15:8] config reg */ + /* Polo GPIO[15:8] config reg */ #define POLO_GPIO_OD1_REG regptr(MSP_PER_BASE + 0x0EC) /* Polo GPIO[31:0] output drive */ #define POLO_GPIO_CFG3_REG regptr(MSP_PER_BASE + 0x170) - /* Polo GPIO[23:16] config reg */ + /* Polo GPIO[23:16] config reg */ #define POLO_GPIO_DAT2_REG regptr(MSP_PER_BASE + 0x174) - /* Polo GPIO[15:9] data reg */ + /* Polo GPIO[15:9] data reg */ #define POLO_GPIO_DAT3_REG regptr(MSP_PER_BASE + 0x178) - /* Polo GPIO[23:16] data reg */ + /* Polo GPIO[23:16] data reg */ #define POLO_GPIO_DAT4_REG regptr(MSP_PER_BASE + 0x17C) - /* Polo GPIO[31:24] data reg */ + /* Polo GPIO[31:24] data reg */ #define POLO_GPIO_DAT5_REG regptr(MSP_PER_BASE + 0x180) - /* Polo GPIO[39:32] data reg */ + /* Polo GPIO[39:32] data reg */ #define POLO_GPIO_DAT6_REG regptr(MSP_PER_BASE + 0x184) - /* Polo GPIO[47:40] data reg */ + /* Polo GPIO[47:40] data reg */ #define POLO_GPIO_DAT7_REG regptr(MSP_PER_BASE + 0x188) - /* Polo GPIO[54:48] data reg */ + /* Polo GPIO[54:48] data reg */ #define POLO_GPIO_CFG4_REG regptr(MSP_PER_BASE + 0x18C) - /* Polo GPIO[31:24] config reg */ + /* Polo GPIO[31:24] config reg */ #define POLO_GPIO_CFG5_REG regptr(MSP_PER_BASE + 0x190) - /* Polo GPIO[39:32] config reg */ + /* Polo GPIO[39:32] config reg */ #define POLO_GPIO_CFG6_REG regptr(MSP_PER_BASE + 0x194) - /* Polo GPIO[47:40] config reg */ + /* Polo GPIO[47:40] config reg */ #define POLO_GPIO_CFG7_REG regptr(MSP_PER_BASE + 0x198) - /* Polo GPIO[54:48] config reg */ + /* Polo GPIO[54:48] config reg */ #define POLO_GPIO_OD2_REG regptr(MSP_PER_BASE + 0x19C) /* Polo GPIO[54:32] output drive */ -/* Generic GPIO registers */ +/* Generic GPIO registers */ #define GPIO_DATA1_REG regptr(MSP_PER_BASE + 0x170) - /* GPIO[1:0] data register */ + /* GPIO[1:0] data register */ #define GPIO_DATA2_REG regptr(MSP_PER_BASE + 0x174) - /* GPIO[5:2] data register */ + /* GPIO[5:2] data register */ #define GPIO_DATA3_REG regptr(MSP_PER_BASE + 0x178) - /* GPIO[9:6] data register */ + /* GPIO[9:6] data register */ #define GPIO_DATA4_REG regptr(MSP_PER_BASE + 0x17C) - /* GPIO[15:10] data register */ + /* GPIO[15:10] data register */ #define GPIO_CFG1_REG regptr(MSP_PER_BASE + 0x180) - /* GPIO[1:0] config register */ + /* GPIO[1:0] config register */ #define GPIO_CFG2_REG regptr(MSP_PER_BASE + 0x184) - /* GPIO[5:2] config register */ + /* GPIO[5:2] config register */ #define GPIO_CFG3_REG regptr(MSP_PER_BASE + 0x188) - /* GPIO[9:6] config register */ + /* GPIO[9:6] config register */ #define GPIO_CFG4_REG regptr(MSP_PER_BASE + 0x18C) - /* GPIO[15:10] config register */ + /* GPIO[15:10] config register */ #define GPIO_OD_REG regptr(MSP_PER_BASE + 0x190) - /* GPIO[15:0] output drive */ + /* GPIO[15:0] output drive */ /* *************************************************************************** - * CPU Interface register definitions * + * CPU Interface register definitions * *************************************************************************** */ #define PCI_FLUSH_REG regptr(MSP_CPUIF_BASE + 0x00) /* PCI-SDRAM queue flush trigger */ #define OCP_ERR1_REG regptr(MSP_CPUIF_BASE + 0x04) - /* OCP Error Attribute 1 */ + /* OCP Error Attribute 1 */ #define OCP_ERR2_REG regptr(MSP_CPUIF_BASE + 0x08) - /* OCP Error Attribute 2 */ + /* OCP Error Attribute 2 */ #define OCP_STS_REG regptr(MSP_CPUIF_BASE + 0x0C) - /* OCP Error Status */ + /* OCP Error Status */ #define CPUIF_PM_REG regptr(MSP_CPUIF_BASE + 0x10) - /* CPU policy configuration */ + /* CPU policy configuration */ #define CPUIF_CFG_REG regptr(MSP_CPUIF_BASE + 0x10) - /* Misc configuration options */ + /* Misc configuration options */ /* Central Interrupt Controller Registers */ #define MSP_CIC_BASE (MSP_CPUIF_BASE + 0x8000) - /* Central Interrupt registers */ + /* Central Interrupt registers */ #define CIC_EXT_CFG_REG regptr(MSP_CIC_BASE + 0x00) - /* External interrupt config */ + /* External interrupt config */ #define CIC_STS_REG regptr(MSP_CIC_BASE + 0x04) - /* CIC Interrupt Status */ + /* CIC Interrupt Status */ #define CIC_VPE0_MSK_REG regptr(MSP_CIC_BASE + 0x08) - /* VPE0 Interrupt Mask */ + /* VPE0 Interrupt Mask */ #define CIC_VPE1_MSK_REG regptr(MSP_CIC_BASE + 0x0C) - /* VPE1 Interrupt Mask */ + /* VPE1 Interrupt Mask */ #define CIC_TC0_MSK_REG regptr(MSP_CIC_BASE + 0x10) - /* Thread Context 0 Int Mask */ + /* Thread Context 0 Int Mask */ #define CIC_TC1_MSK_REG regptr(MSP_CIC_BASE + 0x14) - /* Thread Context 1 Int Mask */ + /* Thread Context 1 Int Mask */ #define CIC_TC2_MSK_REG regptr(MSP_CIC_BASE + 0x18) - /* Thread Context 2 Int Mask */ + /* Thread Context 2 Int Mask */ #define CIC_TC3_MSK_REG regptr(MSP_CIC_BASE + 0x18) - /* Thread Context 3 Int Mask */ + /* Thread Context 3 Int Mask */ #define CIC_TC4_MSK_REG regptr(MSP_CIC_BASE + 0x18) - /* Thread Context 4 Int Mask */ + /* Thread Context 4 Int Mask */ #define CIC_PCIMSI_STS_REG regptr(MSP_CIC_BASE + 0x18) #define CIC_PCIMSI_MSK_REG regptr(MSP_CIC_BASE + 0x18) #define CIC_PCIFLSH_REG regptr(MSP_CIC_BASE + 0x18) @@ -509,7 +509,7 @@ /* *************************************************************************** - * Memory controller registers * + * Memory controller registers * *************************************************************************** */ #define MEM_CFG1_REG regptr(MSP_MEM_CFG_BASE + 0x00) @@ -519,7 +519,7 @@ /* *************************************************************************** - * PCI controller registers * + * PCI controller registers * *************************************************************************** */ #define PCI_BASE_REG regptr(MSP_PCI_BASE + 0x00) @@ -528,25 +528,25 @@ /* ######################################################################## - # Register content & macro definitions # + # Register content & macro definitions # ######################################################################## */ /* *************************************************************************** - * DEV_ID defines * + * DEV_ID defines * *************************************************************************** */ -#define DEV_ID_PCI_DIS (1 << 26) /* Set if PCI disabled */ -#define DEV_ID_PCI_HOST (1 << 20) /* Set if PCI host */ -#define DEV_ID_SINGLE_PC (1 << 19) /* Set if single PC Card */ -#define DEV_ID_FAMILY (0xff << 8) /* family ID code */ -#define POLO_ZEUS_SUB_FAMILY (0x7 << 16) /* sub family for Polo/Zeus */ +#define DEV_ID_PCI_DIS (1 << 26) /* Set if PCI disabled */ +#define DEV_ID_PCI_HOST (1 << 20) /* Set if PCI host */ +#define DEV_ID_SINGLE_PC (1 << 19) /* Set if single PC Card */ +#define DEV_ID_FAMILY (0xff << 8) /* family ID code */ +#define POLO_ZEUS_SUB_FAMILY (0x7 << 16) /* sub family for Polo/Zeus */ -#define MSPFPGA_ID (0x00 << 8) /* you are on your own here */ +#define MSPFPGA_ID (0x00 << 8) /* you are on your own here */ #define MSP5000_ID (0x50 << 8) -#define MSP4F00_ID (0x4f << 8) /* FPGA version of MSP4200 */ -#define MSP4E00_ID (0x4f << 8) /* FPGA version of MSP7120 */ +#define MSP4F00_ID (0x4f << 8) /* FPGA version of MSP4200 */ +#define MSP4E00_ID (0x4f << 8) /* FPGA version of MSP7120 */ #define MSP4200_ID (0x42 << 8) #define MSP4000_ID (0x40 << 8) #define MSP2XXX_ID (0x20 << 8) @@ -563,27 +563,27 @@ /* *************************************************************************** - * RESET defines * + * RESET defines * *************************************************************************** */ -#define MSP_GR_RST (0x01 << 0) /* Global reset bit */ -#define MSP_MR_RST (0x01 << 1) /* MIPS reset bit */ -#define MSP_PD_RST (0x01 << 2) /* PVC DMA reset bit */ -#define MSP_PP_RST (0x01 << 3) /* PVC reset bit */ -/* reserved */ -#define MSP_EA_RST (0x01 << 6) /* Mac A reset bit */ -#define MSP_EB_RST (0x01 << 7) /* Mac B reset bit */ -#define MSP_SE_RST (0x01 << 8) /* Security Eng reset bit */ -#define MSP_PB_RST (0x01 << 9) /* Per block reset bit */ -#define MSP_EC_RST (0x01 << 10) /* Mac C reset bit */ -#define MSP_TW_RST (0x01 << 11) /* TWI reset bit */ -#define MSP_SPI_RST (0x01 << 12) /* SPI/MPI reset bit */ -#define MSP_U1_RST (0x01 << 13) /* UART1 reset bit */ -#define MSP_U0_RST (0x01 << 14) /* UART0 reset bit */ +#define MSP_GR_RST (0x01 << 0) /* Global reset bit */ +#define MSP_MR_RST (0x01 << 1) /* MIPS reset bit */ +#define MSP_PD_RST (0x01 << 2) /* PVC DMA reset bit */ +#define MSP_PP_RST (0x01 << 3) /* PVC reset bit */ +/* reserved */ +#define MSP_EA_RST (0x01 << 6) /* Mac A reset bit */ +#define MSP_EB_RST (0x01 << 7) /* Mac B reset bit */ +#define MSP_SE_RST (0x01 << 8) /* Security Eng reset bit */ +#define MSP_PB_RST (0x01 << 9) /* Per block reset bit */ +#define MSP_EC_RST (0x01 << 10) /* Mac C reset bit */ +#define MSP_TW_RST (0x01 << 11) /* TWI reset bit */ +#define MSP_SPI_RST (0x01 << 12) /* SPI/MPI reset bit */ +#define MSP_U1_RST (0x01 << 13) /* UART1 reset bit */ +#define MSP_U0_RST (0x01 << 14) /* UART0 reset bit */ /* *************************************************************************** - * UART defines * + * UART defines * *************************************************************************** */ #define MSP_BASE_BAUD 25000000 @@ -591,15 +591,15 @@ /* *************************************************************************** - * ELB defines * + * ELB defines * *************************************************************************** */ -#define PCCARD_32 0x02 /* Set if is PCCARD 32 (Cardbus) */ -#define SINGLE_PCCARD 0x01 /* Set to enable single PC card */ +#define PCCARD_32 0x02 /* Set if is PCCARD 32 (Cardbus) */ +#define SINGLE_PCCARD 0x01 /* Set to enable single PC card */ /* *************************************************************************** - * CIC defines * + * CIC defines * *************************************************************************** */ @@ -625,7 +625,7 @@ /* *************************************************************************** - * Memory Controller defines * + * Memory Controller defines * *************************************************************************** */ @@ -644,17 +644,17 @@ /* *************************************************************************** - * SPI/MPI Mode * + * SPI/MPI Mode * *************************************************************************** */ #define SPI_MPI_RX_BUSY 0x00008000 /* SPI/MPI Receive Busy */ -#define SPI_MPI_FIFO_EMPTY 0x00004000 /* SPI/MPI Fifo Empty */ +#define SPI_MPI_FIFO_EMPTY 0x00004000 /* SPI/MPI Fifo Empty */ #define SPI_MPI_TX_BUSY 0x00002000 /* SPI/MPI Transmit Busy */ -#define SPI_MPI_FIFO_FULL 0x00001000 /* SPI/MPU FIFO full */ +#define SPI_MPI_FIFO_FULL 0x00001000 /* SPI/MPU FIFO full */ /* *************************************************************************** - * SPI/MPI Control Register * + * SPI/MPI Control Register * *************************************************************************** */ #define SPI_MPI_RX_START 0x00000004 /* Start receive command */ diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_slp_int.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_slp_int.h index 96d4c8ce8c83..51a66dcc429d 100644 --- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_slp_int.h +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_slp_int.h @@ -27,9 +27,9 @@ /* * The PMC-Sierra SLP interrupts are arranged in a 3 level cascaded - * hierarchical system. The first level are the direct MIPS interrupts + * hierarchical system. The first level are the direct MIPS interrupts * and are assigned the interrupt range 0-7. The second level is the SLM - * interrupt controller and is assigned the range 8-39. The third level + * interrupt controller and is assigned the range 8-39. The third level * comprises the Peripherial block, the PCI block, the PCI MSI block and * the SLP. The PCI interrupts and the SLP errors are handled by the * relevant subsystems so the core interrupt code needs only concern @@ -41,11 +41,11 @@ * IRQs directly connected to CPU */ #define MSP_MIPS_INTBASE 0 -#define MSP_INT_SW0 0 /* IRQ for swint0, C_SW0 */ -#define MSP_INT_SW1 1 /* IRQ for swint1, C_SW1 */ -#define MSP_INT_MAC0 2 /* IRQ for MAC 0, C_IRQ0 */ -#define MSP_INT_MAC1 3 /* IRQ for MAC 1, C_IRQ1 */ -#define MSP_INT_C_IRQ2 4 /* Wired off, C_IRQ2 */ +#define MSP_INT_SW0 0 /* IRQ for swint0, C_SW0 */ +#define MSP_INT_SW1 1 /* IRQ for swint1, C_SW1 */ +#define MSP_INT_MAC0 2 /* IRQ for MAC 0, C_IRQ0 */ +#define MSP_INT_MAC1 3 /* IRQ for MAC 1, C_IRQ1 */ +#define MSP_INT_C_IRQ2 4 /* Wired off, C_IRQ2 */ #define MSP_INT_VE 5 /* IRQ for Voice Engine, C_IRQ3 */ #define MSP_INT_SLP 6 /* IRQ for SLM block, C_IRQ4 */ #define MSP_INT_TIMER 7 /* IRQ for the MIPS timer, C_IRQ5 */ @@ -57,85 +57,85 @@ */ #define MSP_SLP_INTBASE (MSP_MIPS_INTBASE + 8) #define MSP_INT_EXT0 (MSP_SLP_INTBASE + 0) - /* External interrupt 0 */ + /* External interrupt 0 */ #define MSP_INT_EXT1 (MSP_SLP_INTBASE + 1) - /* External interrupt 1 */ + /* External interrupt 1 */ #define MSP_INT_EXT2 (MSP_SLP_INTBASE + 2) - /* External interrupt 2 */ + /* External interrupt 2 */ #define MSP_INT_EXT3 (MSP_SLP_INTBASE + 3) - /* External interrupt 3 */ -/* Reserved 4-7 */ + /* External interrupt 3 */ +/* Reserved 4-7 */ /* ************************************************************************* * DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER * - * Some MSP produces have this interrupt labelled as Voice and some are * - * SEC mbox ... * + * Some MSP produces have this interrupt labelled as Voice and some are * + * SEC mbox ... * ************************************************************************* */ #define MSP_INT_SLP_VE (MSP_SLP_INTBASE + 8) /* Cascaded IRQ for Voice Engine*/ #define MSP_INT_SLP_TDM (MSP_SLP_INTBASE + 9) - /* TDM interrupt */ + /* TDM interrupt */ #define MSP_INT_SLP_MAC0 (MSP_SLP_INTBASE + 10) - /* Cascaded IRQ for MAC 0 */ + /* Cascaded IRQ for MAC 0 */ #define MSP_INT_SLP_MAC1 (MSP_SLP_INTBASE + 11) - /* Cascaded IRQ for MAC 1 */ + /* Cascaded IRQ for MAC 1 */ #define MSP_INT_SEC (MSP_SLP_INTBASE + 12) - /* IRQ for security engine */ -#define MSP_INT_PER (MSP_SLP_INTBASE + 13) - /* Peripheral interrupt */ -#define MSP_INT_TIMER0 (MSP_SLP_INTBASE + 14) - /* SLP timer 0 */ -#define MSP_INT_TIMER1 (MSP_SLP_INTBASE + 15) - /* SLP timer 1 */ -#define MSP_INT_TIMER2 (MSP_SLP_INTBASE + 16) - /* SLP timer 2 */ -#define MSP_INT_SLP_TIMER (MSP_SLP_INTBASE + 17) - /* Cascaded MIPS timer */ + /* IRQ for security engine */ +#define MSP_INT_PER (MSP_SLP_INTBASE + 13) + /* Peripheral interrupt */ +#define MSP_INT_TIMER0 (MSP_SLP_INTBASE + 14) + /* SLP timer 0 */ +#define MSP_INT_TIMER1 (MSP_SLP_INTBASE + 15) + /* SLP timer 1 */ +#define MSP_INT_TIMER2 (MSP_SLP_INTBASE + 16) + /* SLP timer 2 */ +#define MSP_INT_SLP_TIMER (MSP_SLP_INTBASE + 17) + /* Cascaded MIPS timer */ #define MSP_INT_BLKCP (MSP_SLP_INTBASE + 18) - /* Block Copy */ + /* Block Copy */ #define MSP_INT_UART0 (MSP_SLP_INTBASE + 19) - /* UART 0 */ + /* UART 0 */ #define MSP_INT_PCI (MSP_SLP_INTBASE + 20) - /* PCI subsystem */ + /* PCI subsystem */ #define MSP_INT_PCI_DBELL (MSP_SLP_INTBASE + 21) - /* PCI doorbell */ + /* PCI doorbell */ #define MSP_INT_PCI_MSI (MSP_SLP_INTBASE + 22) - /* PCI Message Signal */ + /* PCI Message Signal */ #define MSP_INT_PCI_BC0 (MSP_SLP_INTBASE + 23) - /* PCI Block Copy 0 */ + /* PCI Block Copy 0 */ #define MSP_INT_PCI_BC1 (MSP_SLP_INTBASE + 24) - /* PCI Block Copy 1 */ + /* PCI Block Copy 1 */ #define MSP_INT_SLP_ERR (MSP_SLP_INTBASE + 25) - /* SLP error condition */ + /* SLP error condition */ #define MSP_INT_MAC2 (MSP_SLP_INTBASE + 26) - /* IRQ for MAC2 */ -/* Reserved 26-31 */ + /* IRQ for MAC2 */ +/* Reserved 26-31 */ /* * IRQs cascaded on SLP PER interrupt (MSP_INT_PER) */ #define MSP_PER_INTBASE (MSP_SLP_INTBASE + 32) -/* Reserved 0-1 */ +/* Reserved 0-1 */ #define MSP_INT_UART1 (MSP_PER_INTBASE + 2) - /* UART 1 */ -/* Reserved 3-5 */ + /* UART 1 */ +/* Reserved 3-5 */ #define MSP_INT_2WIRE (MSP_PER_INTBASE + 6) - /* 2-wire */ + /* 2-wire */ #define MSP_INT_TM0 (MSP_PER_INTBASE + 7) /* Peripheral timer block out 0 */ #define MSP_INT_TM1 (MSP_PER_INTBASE + 8) /* Peripheral timer block out 1 */ -/* Reserved 9 */ +/* Reserved 9 */ #define MSP_INT_SPRX (MSP_PER_INTBASE + 10) - /* SPI RX complete */ + /* SPI RX complete */ #define MSP_INT_SPTX (MSP_PER_INTBASE + 11) - /* SPI TX complete */ + /* SPI TX complete */ #define MSP_INT_GPIO (MSP_PER_INTBASE + 12) - /* GPIO */ + /* GPIO */ #define MSP_INT_PER_ERR (MSP_PER_INTBASE + 13) - /* Peripheral error */ -/* Reserved 14-31 */ + /* Peripheral error */ +/* Reserved 14-31 */ #endif /* !_MSP_SLP_INT_H */ diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_usb.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_usb.h index 4c9348df9df2..aa45e6a07126 100644 --- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_usb.h +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_usb.h @@ -40,7 +40,7 @@ #define MSP_USB0_HS_END (MSP_USB0_BASE + 0x401FF) /* Register spaces for USB host 1 */ -#define MSP_USB1_MAB_START (MSP_USB1_BASE + 0x0) +#define MSP_USB1_MAB_START (MSP_USB1_BASE + 0x0) #define MSP_USB1_MAB_END (MSP_USB1_BASE + 0x17) #define MSP_USB1_ID_START (MSP_USB1_BASE + 0x40000) #define MSP_USB1_ID_END (MSP_USB1_BASE + 0x4008f) diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/war.h b/arch/mips/include/asm/pmc-sierra/msp71xx/war.h index c74eb1657f5f..a60bf9dd14ae 100644 --- a/arch/mips/include/asm/pmc-sierra/msp71xx/war.h +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/war.h @@ -21,9 +21,9 @@ #define R10000_LLSC_WAR 0 #if defined(CONFIG_PMC_MSP7120_EVAL) || defined(CONFIG_PMC_MSP7120_GW) || \ defined(CONFIG_PMC_MSP7120_FPGA) -#define MIPS34K_MISSED_ITLB_WAR 1 +#define MIPS34K_MISSED_ITLB_WAR 1 #else -#define MIPS34K_MISSED_ITLB_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 #endif #endif /* __ASM_MIPS_PMC_SIERRA_WAR_H */ |