summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/target/target_core_transport.c143
1 files changed, 66 insertions, 77 deletions
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 634d0f31a28c..bb19223faa46 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -1418,6 +1418,10 @@ int target_setup_cmd_from_cdb(
struct se_cmd *cmd,
unsigned char *cdb)
{
+ struct se_subsystem_dev *su_dev = cmd->se_dev->se_sub_dev;
+ u32 pr_reg_type = 0;
+ u8 alua_ascq = 0;
+ unsigned long flags;
int ret;
transport_generic_prepare_cdb(cdb);
@@ -1457,6 +1461,58 @@ int target_setup_cmd_from_cdb(
* Copy the original CDB into cmd->
*/
memcpy(cmd->t_task_cdb, cdb, scsi_command_size(cdb));
+
+ /*
+ * Check for an existing UNIT ATTENTION condition
+ */
+ if (core_scsi3_ua_check(cmd, cdb) < 0) {
+ cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
+ cmd->scsi_sense_reason = TCM_CHECK_CONDITION_UNIT_ATTENTION;
+ return -EINVAL;
+ }
+
+ ret = su_dev->t10_alua.alua_state_check(cmd, cdb, &alua_ascq);
+ if (ret != 0) {
+ /*
+ * Set SCSI additional sense code (ASC) to 'LUN Not Accessible';
+ * The ALUA additional sense code qualifier (ASCQ) is determined
+ * by the ALUA primary or secondary access state..
+ */
+ if (ret > 0) {
+ pr_debug("[%s]: ALUA TG Port not available, "
+ "SenseKey: NOT_READY, ASC/ASCQ: "
+ "0x04/0x%02x\n",
+ cmd->se_tfo->get_fabric_name(), alua_ascq);
+
+ transport_set_sense_codes(cmd, 0x04, alua_ascq);
+ cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
+ cmd->scsi_sense_reason = TCM_CHECK_CONDITION_NOT_READY;
+ return -EINVAL;
+ }
+ cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
+ cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD;
+ return -EINVAL;
+ }
+
+ /*
+ * Check status for SPC-3 Persistent Reservations
+ */
+ if (su_dev->t10_pr.pr_ops.t10_reservation_check(cmd, &pr_reg_type)) {
+ if (su_dev->t10_pr.pr_ops.t10_seq_non_holder(
+ cmd, cdb, pr_reg_type) != 0) {
+ cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
+ cmd->se_cmd_flags |= SCF_SCSI_RESERVATION_CONFLICT;
+ cmd->scsi_status = SAM_STAT_RESERVATION_CONFLICT;
+ cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT;
+ return -EBUSY;
+ }
+ /*
+ * This means the CDB is allowed for the SCSI Initiator port
+ * when said port is *NOT* holding the legacy SPC-2 or
+ * SPC-3 Persistent Reservation.
+ */
+ }
+
/*
* Setup the received CDB based on SCSI defined opcodes and
* perform unit attention, persistent reservations and ALUA
@@ -1466,6 +1522,11 @@ int target_setup_cmd_from_cdb(
ret = transport_generic_cmd_sequencer(cmd, cdb);
if (ret < 0)
return ret;
+
+ spin_lock_irqsave(&cmd->t_state_lock, flags);
+ cmd->se_cmd_flags |= SCF_SUPPORTED_SAM_OPCODE;
+ spin_unlock_irqrestore(&cmd->t_state_lock, flags);
+
/*
* Check for SAM Task Attribute Emulation
*/
@@ -1889,15 +1950,6 @@ static inline unsigned long long transport_lba_64_ext(unsigned char *cdb)
return ((unsigned long long)__v2) | (unsigned long long)__v1 << 32;
}
-static void transport_set_supported_SAM_opcode(struct se_cmd *se_cmd)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&se_cmd->t_state_lock, flags);
- se_cmd->se_cmd_flags |= SCF_SUPPORTED_SAM_OPCODE;
- spin_unlock_irqrestore(&se_cmd->t_state_lock, flags);
-}
-
/*
* Called from Fabric Module context from transport_execute_tasks()
*
@@ -2370,74 +2422,15 @@ static int target_check_write_same_discard(unsigned char *flags, struct se_devic
return 0;
}
-/* transport_generic_cmd_sequencer():
- *
- * Generic Command Sequencer that should work for most DAS transport
- * drivers.
- *
- * Called from target_setup_cmd_from_cdb() in the $FABRIC_MOD
- * RX Thread.
- *
- * FIXME: Need to support other SCSI OPCODES where as well.
- */
static int transport_generic_cmd_sequencer(
struct se_cmd *cmd,
unsigned char *cdb)
{
struct se_device *dev = cmd->se_dev;
struct se_subsystem_dev *su_dev = dev->se_sub_dev;
- int ret = 0, sector_ret = 0, passthrough;
- u32 sectors = 0, size = 0, pr_reg_type = 0;
+ int sector_ret = 0, passthrough;
+ u32 sectors = 0, size = 0;
u16 service_action;
- u8 alua_ascq = 0;
- /*
- * Check for an existing UNIT ATTENTION condition
- */
- if (core_scsi3_ua_check(cmd, cdb) < 0) {
- cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
- cmd->scsi_sense_reason = TCM_CHECK_CONDITION_UNIT_ATTENTION;
- return -EINVAL;
- }
- /*
- * Check status of Asymmetric Logical Unit Assignment port
- */
- ret = su_dev->t10_alua.alua_state_check(cmd, cdb, &alua_ascq);
- if (ret != 0) {
- /*
- * Set SCSI additional sense code (ASC) to 'LUN Not Accessible';
- * The ALUA additional sense code qualifier (ASCQ) is determined
- * by the ALUA primary or secondary access state..
- */
- if (ret > 0) {
- pr_debug("[%s]: ALUA TG Port not available,"
- " SenseKey: NOT_READY, ASC/ASCQ: 0x04/0x%02x\n",
- cmd->se_tfo->get_fabric_name(), alua_ascq);
-
- transport_set_sense_codes(cmd, 0x04, alua_ascq);
- cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
- cmd->scsi_sense_reason = TCM_CHECK_CONDITION_NOT_READY;
- return -EINVAL;
- }
- goto out_invalid_cdb_field;
- }
- /*
- * Check status for SPC-3 Persistent Reservations
- */
- if (su_dev->t10_pr.pr_ops.t10_reservation_check(cmd, &pr_reg_type) != 0) {
- if (su_dev->t10_pr.pr_ops.t10_seq_non_holder(
- cmd, cdb, pr_reg_type) != 0) {
- cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
- cmd->se_cmd_flags |= SCF_SCSI_RESERVATION_CONFLICT;
- cmd->scsi_status = SAM_STAT_RESERVATION_CONFLICT;
- cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT;
- return -EBUSY;
- }
- /*
- * This means the CDB is allowed for the SCSI Initiator port
- * when said port is *NOT* holding the legacy SPC-2 or
- * SPC-3 Persistent Reservation.
- */
- }
/*
* If we operate in passthrough mode we skip most CDB emulation and
@@ -2992,7 +2985,7 @@ static int transport_generic_cmd_sequencer(
* Reject READ_* or WRITE_* with overflow/underflow for
* type SCF_SCSI_DATA_SG_IO_CDB.
*/
- if (!ret && (dev->se_sub_dev->se_dev_attrib.block_size != 512)) {
+ if (dev->se_sub_dev->se_dev_attrib.block_size != 512) {
pr_err("Failing OVERFLOW/UNDERFLOW for LBA op"
" CDB on non 512-byte sector setup subsystem"
" plugin: %s\n", dev->transport->name);
@@ -3032,8 +3025,7 @@ static int transport_generic_cmd_sequencer(
(cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB)))
goto out_unsupported_cdb;
- transport_set_supported_SAM_opcode(cmd);
- return ret;
+ return 0;
out_unsupported_cdb:
cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
@@ -3967,10 +3959,7 @@ bool transport_wait_for_tasks(struct se_cmd *cmd)
spin_unlock_irqrestore(&cmd->t_state_lock, flags);
return false;
}
- /*
- * Only perform a possible wait_for_tasks if SCF_SUPPORTED_SAM_OPCODE
- * has been set in transport_set_supported_SAM_opcode().
- */
+
if (!(cmd->se_cmd_flags & SCF_SUPPORTED_SAM_OPCODE) &&
!(cmd->se_cmd_flags & SCF_SCSI_TMR_CDB)) {
spin_unlock_irqrestore(&cmd->t_state_lock, flags);
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 00:14:49 +0000