diff options
| author | Adrian Bunk <bunk@kernel.org> | 2008-04-28 23:44:43 +0200 |
|---|---|---|
| committer | Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 2008-04-28 23:44:43 +0200 |
| commit | 2064c946eaca641d28281264d01d0c8b977f1f20 (patch) | |
| tree | 4fb044fd6773560e295a45e497a32c87b05ffc0c /arch | |
| parent | 3f31b874600bcee53bac6846f72fbee5c33c8805 (diff) | |
ARM: always select HAVE_IDE
It's plain wrong for PCMCIA to select HAVE_IDE that implies e.g. the
availability of an asm/ide.h
It turns out this was done for ARM, and we can simply always select
HAVE_IDE on ARM instead of manually tracking which platforms might
possible have an IDE controller directly or indirectly.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Russell King <rmk+lkml@arm.linux.org.uk>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/Kconfig | 15 |
1 files changed, 1 insertions, 14 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index d8d253285a94..b786e68914d4 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -8,6 +8,7 @@ mainmenu "Linux Kernel Configuration" config ARM bool default y + select HAVE_IDE select RTC_LIB select SYS_SUPPORTS_APM_EMULATION select HAVE_OPROFILE @@ -223,7 +224,6 @@ config ARCH_CLPS7500 select TIMER_ACORN select ISA select NO_IOPORT - select HAVE_IDE help Support for the Cirrus Logic PS7500FE system-on-a-chip. @@ -236,7 +236,6 @@ config ARCH_CO285 bool "Co-EBSA285" select FOOTBRIDGE select FOOTBRIDGE_ADDIN - select HAVE_IDE help Support for Intel's EBSA285 companion chip. @@ -262,7 +261,6 @@ config ARCH_EP93XX config ARCH_FOOTBRIDGE bool "FootBridge" select FOOTBRIDGE - select HAVE_IDE help Support for systems based on the DC21285 companion chip ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. @@ -301,7 +299,6 @@ config ARCH_IOP32X depends on MMU select PLAT_IOP select PCI - select HAVE_IDE help Support for Intel's 80219 and IOP32X (XScale) family of processors. @@ -311,14 +308,12 @@ config ARCH_IOP33X depends on MMU select PLAT_IOP select PCI - select HAVE_IDE help Support for Intel's IOP33X (XScale) family of processors. config ARCH_IXP23XX bool "IXP23XX-based" depends on MMU - select HAVE_IDE select PCI help Support for Intel's IXP23xx (XScale) family of processors. @@ -336,14 +331,12 @@ config ARCH_IXP4XX select GENERIC_GPIO select GENERIC_TIME select GENERIC_CLOCKEVENTS - select HAVE_IDE help Support for Intel's IXP4XX (XScale) family of processors. config ARCH_L7200 bool "LinkUp-L7200" select FIQ - select HAVE_IDE help Say Y here if you intend to run this kernel on a LinkUp Systems L7200 Software Development Board which uses an ARM720T processor. @@ -400,7 +393,6 @@ config ARCH_PXA depends on MMU select ARCH_MTD_XIP select GENERIC_GPIO - select HAVE_IDE select HAVE_GPIO_LIB select GENERIC_TIME select GENERIC_CLOCKEVENTS @@ -416,7 +408,6 @@ config ARCH_RPC select ARCH_MAY_HAVE_PC_FDC select ISA_DMA_API select NO_IOPORT - select HAVE_IDE help On the Acorn Risc-PC, Linux can support the internal IDE disk and CD-ROM interface, serial and parallel port, and the floppy drive. @@ -432,7 +423,6 @@ config ARCH_SA1100 select GENERIC_TIME select GENERIC_CLOCKEVENTS select TICK_ONESHOT - select HAVE_IDE select HAVE_GPIO_LIB help Support for StrongARM 11x0 based boards. @@ -440,7 +430,6 @@ config ARCH_SA1100 config ARCH_S3C2410 bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443" select GENERIC_GPIO - select HAVE_IDE help Samsung S3C2410X CPU based systems, such as the Simtec Electronics BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or @@ -448,7 +437,6 @@ config ARCH_S3C2410 config ARCH_SHARK bool "Shark" - select HAVE_IDE select ISA select ISA_DMA select PCI @@ -458,7 +446,6 @@ config ARCH_SHARK config ARCH_LH7A40X bool "Sharp LH7A40X" - select HAVE_IDE help Say Y here for systems based on one of the Sharp LH7A40X System on a Chip processors. These CPUs include an ARM922T |