sparc32: generic clockevent support

The kernel uses l14 timers as clockevents. l10 timer is used
as clocksource if platform master_l10_counter isn't constantly
zero. The clocksource is continuous, so it's possible to use
high resolution timers. l10 timer is also used as clockevent
on UP configurations.

This realization is for sun4m, sun4d, sun4c, microsparc-IIep
and LEON platforms. The appropriate LEON changes was made by
Konrad Eisele.

In case of sun4m's oneshot mode, profile irq is zeroed in
smp4m_percpu_timer_interrupt(). It is maybe
needless (double, triple etc overflow does nothing).

sun4d is able to have oneshot mode too, but I haven't
any way to test it. So code of its percpu timer handler
is made as much equal to the current code as possible.

The patch is tested on sun4m box in SMP mode by me,
and tested by Konrad on leon in up mode (leon smp
is broken atm - due to other reasons).

Signed-off-by: Tkhai Kirill <tkhai@yandex.ru>
Tested-by: Konrad Eisele <konrad@gaisler.com> [leon up]
[sam: revised patch to provide generic support for leon]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 45 insertions, 4 deletions

diff --git a/arch/sparc/kernel/leon_kernel.c b/arch/sparc/kernel/leon_kernel.c
index a94122bc0c7b..722650ab83da 100644
--- a/arch/sparc/kernel/leon_kernel.c
+++ b/arch/sparc/kernel/leon_kernel.c
@@ -10,6 +10,8 @@
 #include <linux/of_platform.h>
 #include <linux/interrupt.h>
 #include <linux/of_device.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
 
 #include <asm/oplib.h>
 #include <asm/timer.h>
@@ -250,7 +252,38 @@ void leon_update_virq_handling(unsigned int virq,
 	irq_set_chip_data(virq, (void *)mask);
 }
 
-void __init leon_init_timers(irq_handler_t counter_fn)
+static u32 leon_cycles_offset(void)
+{
+	u32 rld, val, off;
+	rld = LEON3_BYPASS_LOAD_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx].rld);
+	val = LEON3_BYPASS_LOAD_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx].val);
+	off = rld - val;
+	return rld - val;
+}
+
+#ifdef CONFIG_SMP
+
+/* smp clockevent irq */
+irqreturn_t leon_percpu_timer_ce_interrupt(int irq, void *unused)
+{
+	struct clock_event_device *ce;
+	int cpu = smp_processor_id();
+
+	leon_clear_profile_irq(cpu);
+
+	ce = &per_cpu(sparc32_clockevent, cpu);
+
+	irq_enter();
+	if (ce->event_handler)
+		ce->event_handler(ce);
+	irq_exit();
+
+	return IRQ_HANDLED;
+}
+
+#endif /* CONFIG_SMP */
+
+void __init leon_init_timers(void)
 {
 	int irq, eirq;
 	struct device_node *rootnp, *np, *nnp;
@@ -260,6 +293,14 @@ void __init leon_init_timers(irq_handler_t counter_fn)
 	int ampopts;
 	int err;
 
+	sparc_config.get_cycles_offset = leon_cycles_offset;
+	sparc_config.cs_period = 1000000 / HZ;
+	sparc_config.features |= FEAT_L10_CLOCKSOURCE;
+
+#ifndef CONFIG_SMP
+	sparc_config.features |= FEAT_L10_CLOCKEVENT;
+#endif
+
 	leondebug_irq_disable = 0;
 	leon_debug_irqout = 0;
 	master_l10_counter = (unsigned int *)&dummy_master_l10_counter;
@@ -369,7 +410,7 @@ void __init leon_init_timers(irq_handler_t counter_fn)
 		leon_eirq_setup(eirq);
 
 	irq = _leon_build_device_irq(NULL, leon3_gptimer_irq+leon3_gptimer_idx);
-	err = request_irq(irq, counter_fn, IRQF_TIMER, "timer", NULL);
+	err = request_irq(irq, timer_interrupt, IRQF_TIMER, "timer", NULL);
 	if (err) {
 		printk(KERN_ERR "unable to attach timer IRQ%d\n", irq);
 		prom_halt();
@@ -401,7 +442,7 @@ void __init leon_init_timers(irq_handler_t counter_fn)
 	/* Install per-cpu IRQ handler for broadcasted ticker */
 	irq = leon_build_device_irq(leon3_ticker_irq, handle_percpu_irq,
 				    "per-cpu", 0);
-	err = request_irq(irq, leon_percpu_timer_interrupt,
+	err = request_irq(irq, leon_percpu_timer_ce_interrupt,
 			  IRQF_PERCPU | IRQF_TIMER, "ticker",
 			  NULL);
 	if (err) {
@@ -428,7 +469,6 @@ void leon_clear_clock_irq(void)
 
 void leon_load_profile_irq(int cpu, unsigned int limit)
 {
-	BUG();
 }
 
 void __init leon_trans_init(struct device_node *dp)
@@ -496,6 +536,7 @@ void __init leon_init_IRQ(void)
 {
 	sparc_config.init_timers      = leon_init_timers;
 	sparc_config.build_device_irq = _leon_build_device_irq;
+	sparc_config.clock_rate = 1000000;
 
 	BTFIXUPSET_CALL(clear_clock_irq, leon_clear_clock_irq,
 			BTFIXUPCALL_NORM);