Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver specific changes from Arnd Bergmann:
 "These changes are all driver specific and cross over between arm-soc
  contents and some other subsystem, in these cases cpufreq, crypto,
  dma, pinctrl, mailbox and usb, and the subsystem owners agreed to have
  these changes merged through arm-soc.

  As we proceed to untangle the dependencies between platform code and
  driver code, the amount of changes in this category is fortunately
  shrinking, for 3.11 we have 16 branches here and 101 non-merge
  changesets, the majority of which are for the stedma40 dma engine
  driver used in the ux500 platform.  Cleaning up that code touches
  multiple subsystems, but gets rid of the dependency in the end.

  The mailbox code moved out from mach-omap2 to drivers/mailbox is an
  intermediate step and is still omap specific at the moment.  Patches
  exist to generalize the subsystem and add other drivers with the same
  API, but those did not make it for 3.11."

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits)
  crypto: ux500: use dmaengine_submit API
  crypto: ux500: use dmaengine_prep_slave_sg API
  crypto: ux500: use dmaengine_device_control API
  crypto: ux500/crypt: add missing __iomem qualifiers
  crypto: ux500/hash: add missing static qualifiers
  crypto: ux500/hash: use readl on iomem addresses
  dmaengine: ste_dma40: Declare memcpy config as static
  ARM: ux500: Remove mop500_snowball_ethernet_clock_enable()
  ARM: ux500: Correct the EN_3v3 regulator's on/off GPIO
  ARM: ux500: Provide a AB8500 GPIO Device Tree node
  gpio: rcar: fix gpio_rcar_of_table
  gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections
  gpio-rcar: Reference core gpio documentation in the DT bindings
  clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2
  ARM: dts: Update Samsung I2S documentation
  ARM: dts: add clock provider information for i2s controllers in Exynos5250
  ARM: dts: add Exynos audio subsystem clock controller node
  clk: samsung: register audio subsystem clocks using common clock framework
  ARM: dts: use #include for all device trees for Samsung
  pinctrl: s3c24xx: use correct header for chained_irq functions
  ...

8 files changed, 148 insertions, 501 deletions

diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c
index aba9e5692958..bfe443daf4b0 100644
--- a/arch/arm/mach-ux500/board-mop500-audio.c
+++ b/arch/arm/mach-ux500/board-mop500-audio.c
@@ -21,28 +21,14 @@
 
 static struct stedma40_chan_cfg msp0_dma_rx = {
 	.high_priority = true,
-	.dir = STEDMA40_PERIPH_TO_MEM,
-
-	.src_dev_type = DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX,
-	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-
-	.src_info.psize = STEDMA40_PSIZE_LOG_4,
-	.dst_info.psize = STEDMA40_PSIZE_LOG_4,
-
-	/* data_width is set during configuration */
+	.dir = DMA_DEV_TO_MEM,
+	.dev_type = DB8500_DMA_DEV31_MSP0_SLIM0_CH0,
 };
 
 static struct stedma40_chan_cfg msp0_dma_tx = {
 	.high_priority = true,
-	.dir = STEDMA40_MEM_TO_PERIPH,
-
-	.src_dev_type = STEDMA40_DEV_DST_MEMORY,
-	.dst_dev_type = DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX,
-
-	.src_info.psize = STEDMA40_PSIZE_LOG_4,
-	.dst_info.psize = STEDMA40_PSIZE_LOG_4,
-
-	/* data_width is set during configuration */
+	.dir = DMA_MEM_TO_DEV,
+	.dev_type = DB8500_DMA_DEV31_MSP0_SLIM0_CH0,
 };
 
 struct msp_i2s_platform_data msp0_platform_data = {
@@ -53,28 +39,14 @@ struct msp_i2s_platform_data msp0_platform_data = {
 
 static struct stedma40_chan_cfg msp1_dma_rx = {
 	.high_priority = true,
-	.dir = STEDMA40_PERIPH_TO_MEM,
-
-	.src_dev_type = DB8500_DMA_DEV30_MSP3_RX,
-	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-
-	.src_info.psize = STEDMA40_PSIZE_LOG_4,
-	.dst_info.psize = STEDMA40_PSIZE_LOG_4,
-
-	/* data_width is set during configuration */
+	.dir = DMA_DEV_TO_MEM,
+	.dev_type = DB8500_DMA_DEV30_MSP3,
 };
 
 static struct stedma40_chan_cfg msp1_dma_tx = {
 	.high_priority = true,
-	.dir = STEDMA40_MEM_TO_PERIPH,
-
-	.src_dev_type = STEDMA40_DEV_DST_MEMORY,
-	.dst_dev_type = DB8500_DMA_DEV30_MSP1_TX,
-
-	.src_info.psize = STEDMA40_PSIZE_LOG_4,
-	.dst_info.psize = STEDMA40_PSIZE_LOG_4,
-
-	/* data_width is set during configuration */
+	.dir = DMA_MEM_TO_DEV,
+	.dev_type = DB8500_DMA_DEV30_MSP1,
 };
 
 struct msp_i2s_platform_data msp1_platform_data = {
@@ -85,32 +57,16 @@ struct msp_i2s_platform_data msp1_platform_data = {
 
 static struct stedma40_chan_cfg msp2_dma_rx = {
 	.high_priority = true,
-	.dir = STEDMA40_PERIPH_TO_MEM,
-
-	.src_dev_type = DB8500_DMA_DEV14_MSP2_RX,
-	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-
-	/* MSP2 DMA doesn't work with PSIZE == 4 on DB8500v2 */
-	.src_info.psize = STEDMA40_PSIZE_LOG_1,
-	.dst_info.psize = STEDMA40_PSIZE_LOG_1,
-
-	/* data_width is set during configuration */
+	.dir = DMA_DEV_TO_MEM,
+	.dev_type = DB8500_DMA_DEV14_MSP2,
 };
 
 static struct stedma40_chan_cfg msp2_dma_tx = {
 	.high_priority = true,
-	.dir = STEDMA40_MEM_TO_PERIPH,
-
-	.src_dev_type = STEDMA40_DEV_DST_MEMORY,
-	.dst_dev_type = DB8500_DMA_DEV14_MSP2_TX,
-
-	.src_info.psize = STEDMA40_PSIZE_LOG_4,
-	.dst_info.psize = STEDMA40_PSIZE_LOG_4,
-
+	.dir = DMA_MEM_TO_DEV,
+	.dev_type = DB8500_DMA_DEV14_MSP2,
 	.use_fixed_channel = true,
 	.phy_channel = 1,
-
-	/* data_width is set during configuration */
 };
 
 static struct platform_device *db8500_add_msp_i2s(struct device *parent,
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 43be3e0d4e30..b3e61a38e5c8 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -34,20 +34,14 @@
 #ifdef CONFIG_STE_DMA40
 struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_PERIPH_TO_MEM,
-	.src_dev_type = DB8500_DMA_DEV29_SD_MM0_RX,
-	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-	.src_info.data_width = STEDMA40_WORD_WIDTH,
-	.dst_info.data_width = STEDMA40_WORD_WIDTH,
+	.dir = DMA_DEV_TO_MEM,
+	.dev_type = DB8500_DMA_DEV29_SD_MM0,
 };
 
 static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_MEM_TO_PERIPH,
-	.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
-	.dst_dev_type = DB8500_DMA_DEV29_SD_MM0_TX,
-	.src_info.data_width = STEDMA40_WORD_WIDTH,
-	.dst_info.data_width = STEDMA40_WORD_WIDTH,
+	.dir = DMA_MEM_TO_DEV,
+	.dev_type = DB8500_DMA_DEV29_SD_MM0,
 };
 #endif
 
@@ -89,20 +83,14 @@ void mop500_sdi_tc35892_init(struct device *parent)
 #ifdef CONFIG_STE_DMA40
 static struct stedma40_chan_cfg sdi1_dma_cfg_rx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_PERIPH_TO_MEM,
-	.src_dev_type = DB8500_DMA_DEV32_SD_MM1_RX,
-	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-	.src_info.data_width = STEDMA40_WORD_WIDTH,
-	.dst_info.data_width = STEDMA40_WORD_WIDTH,
+	.dir = DMA_DEV_TO_MEM,
+	.dev_type = DB8500_DMA_DEV32_SD_MM1,
 };
 
 static struct stedma40_chan_cfg sdi1_dma_cfg_tx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_MEM_TO_PERIPH,
-	.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
-	.dst_dev_type = DB8500_DMA_DEV32_SD_MM1_TX,
-	.src_info.data_width = STEDMA40_WORD_WIDTH,
-	.dst_info.data_width = STEDMA40_WORD_WIDTH,
+	.dir = DMA_MEM_TO_DEV,
+	.dev_type = DB8500_DMA_DEV32_SD_MM1,
 };
 #endif
 
@@ -127,20 +115,14 @@ struct mmci_platform_data mop500_sdi1_data = {
 #ifdef CONFIG_STE_DMA40
 struct stedma40_chan_cfg mop500_sdi2_dma_cfg_rx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_PERIPH_TO_MEM,
-	.src_dev_type =  DB8500_DMA_DEV28_SD_MM2_RX,
-	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-	.src_info.data_width = STEDMA40_WORD_WIDTH,
-	.dst_info.data_width = STEDMA40_WORD_WIDTH,
+	.dir = DMA_DEV_TO_MEM,
+	.dev_type =  DB8500_DMA_DEV28_SD_MM2,
 };
 
 static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_MEM_TO_PERIPH,
-	.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
-	.dst_dev_type = DB8500_DMA_DEV28_SD_MM2_TX,
-	.src_info.data_width = STEDMA40_WORD_WIDTH,
-	.dst_info.data_width = STEDMA40_WORD_WIDTH,
+	.dir = DMA_MEM_TO_DEV,
+	.dev_type = DB8500_DMA_DEV28_SD_MM2,
 };
 #endif
 
@@ -169,20 +151,14 @@ struct mmci_platform_data mop500_sdi2_data = {
 #ifdef CONFIG_STE_DMA40
 struct stedma40_chan_cfg mop500_sdi4_dma_cfg_rx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_PERIPH_TO_MEM,
-	.src_dev_type =  DB8500_DMA_DEV42_SD_MM4_RX,
-	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-	.src_info.data_width = STEDMA40_WORD_WIDTH,
-	.dst_info.data_width = STEDMA40_WORD_WIDTH,
+	.dir = DMA_DEV_TO_MEM,
+	.dev_type =  DB8500_DMA_DEV42_SD_MM4,
 };
 
 static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_MEM_TO_PERIPH,
-	.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
-	.dst_dev_type = DB8500_DMA_DEV42_SD_MM4_TX,
-	.src_info.data_width = STEDMA40_WORD_WIDTH,
-	.dst_info.data_width = STEDMA40_WORD_WIDTH,
+	.dir = DMA_MEM_TO_DEV,
+	.dev_type = DB8500_DMA_DEV42_SD_MM4,
 };
 #endif
 
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 78389de94dde..df5d27a532e9 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -413,47 +413,23 @@ static void mop500_prox_deactivate(struct device *dev)
 	regulator_put(prox_regulator);
 }
 
-void mop500_snowball_ethernet_clock_enable(void)
-{
-	struct clk *clk;
-
-	clk = clk_get_sys("fsmc", NULL);
-	if (!IS_ERR(clk))
-		clk_prepare_enable(clk);
-}
-
 static struct cryp_platform_data u8500_cryp1_platform_data = {
 		.mem_to_engine = {
-				.dir = STEDMA40_MEM_TO_PERIPH,
-				.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
-				.dst_dev_type = DB8500_DMA_DEV48_CAC1_TX,
-				.src_info.data_width = STEDMA40_WORD_WIDTH,
-				.dst_info.data_width = STEDMA40_WORD_WIDTH,
+				.dir = DMA_MEM_TO_DEV,
+				.dev_type = DB8500_DMA_DEV48_CAC1,
 				.mode = STEDMA40_MODE_LOGICAL,
-				.src_info.psize = STEDMA40_PSIZE_LOG_4,
-				.dst_info.psize = STEDMA40_PSIZE_LOG_4,
 		},
 		.engine_to_mem = {
-				.dir = STEDMA40_PERIPH_TO_MEM,
-				.src_dev_type = DB8500_DMA_DEV48_CAC1_RX,
-				.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-				.src_info.data_width = STEDMA40_WORD_WIDTH,
-				.dst_info.data_width = STEDMA40_WORD_WIDTH,
+				.dir = DMA_DEV_TO_MEM,
+				.dev_type = DB8500_DMA_DEV48_CAC1,
 				.mode = STEDMA40_MODE_LOGICAL,
-				.src_info.psize = STEDMA40_PSIZE_LOG_4,
-				.dst_info.psize = STEDMA40_PSIZE_LOG_4,
 		}
 };
 
 static struct stedma40_chan_cfg u8500_hash_dma_cfg_tx = {
-		.dir = STEDMA40_MEM_TO_PERIPH,
-		.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
-		.dst_dev_type = DB8500_DMA_DEV50_HAC1_TX,
-		.src_info.data_width = STEDMA40_WORD_WIDTH,
-		.dst_info.data_width = STEDMA40_WORD_WIDTH,
+		.dir = DMA_MEM_TO_DEV,
+		.dev_type = DB8500_DMA_DEV50_HAC1_TX,
 		.mode = STEDMA40_MODE_LOGICAL,
-		.src_info.psize = STEDMA40_PSIZE_LOG_16,
-		.dst_info.psize = STEDMA40_PSIZE_LOG_16,
 };
 
 static struct hash_platform_data u8500_hash1_platform_data = {
@@ -470,20 +446,14 @@ static struct platform_device *mop500_platform_devs[] __initdata = {
 #ifdef CONFIG_STE_DMA40
 static struct stedma40_chan_cfg ssp0_dma_cfg_rx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_PERIPH_TO_MEM,
-	.src_dev_type =  DB8500_DMA_DEV8_SSP0_RX,
-	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
+	.dir = DMA_DEV_TO_MEM,
+	.dev_type = DB8500_DMA_DEV8_SSP0,
 };
 
 static struct stedma40_chan_cfg ssp0_dma_cfg_tx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_MEM_TO_PERIPH,
-	.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
-	.dst_dev_type = DB8500_DMA_DEV8_SSP0_TX,
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
+	.dir = DMA_MEM_TO_DEV,
+	.dev_type = DB8500_DMA_DEV8_SSP0,
 };
 #endif
 
@@ -511,56 +481,38 @@ static void __init mop500_spi_init(struct device *parent)
 #ifdef CONFIG_STE_DMA40
 static struct stedma40_chan_cfg uart0_dma_cfg_rx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_PERIPH_TO_MEM,
-	.src_dev_type =  DB8500_DMA_DEV13_UART0_RX,
-	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
+	.dir = DMA_DEV_TO_MEM,
+	.dev_type = DB8500_DMA_DEV13_UART0,
 };
 
 static struct stedma40_chan_cfg uart0_dma_cfg_tx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_MEM_TO_PERIPH,
-	.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
-	.dst_dev_type = DB8500_DMA_DEV13_UART0_TX,
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
+	.dir = DMA_MEM_TO_DEV,
+	.dev_type = DB8500_DMA_DEV13_UART0,
 };
 
 static struct stedma40_chan_cfg uart1_dma_cfg_rx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_PERIPH_TO_MEM,
-	.src_dev_type =  DB8500_DMA_DEV12_UART1_RX,
-	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
+	.dir = DMA_DEV_TO_MEM,
+	.dev_type = DB8500_DMA_DEV12_UART1,
 };
 
 static struct stedma40_chan_cfg uart1_dma_cfg_tx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_MEM_TO_PERIPH,
-	.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
-	.dst_dev_type = DB8500_DMA_DEV12_UART1_TX,
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
+	.dir = DMA_MEM_TO_DEV,
+	.dev_type = DB8500_DMA_DEV12_UART1,
 };
 
 static struct stedma40_chan_cfg uart2_dma_cfg_rx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_PERIPH_TO_MEM,
-	.src_dev_type =  DB8500_DMA_DEV11_UART2_RX,
-	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
+	.dir = DMA_DEV_TO_MEM,
+	.dev_type = DB8500_DMA_DEV11_UART2,
 };
 
 static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_MEM_TO_PERIPH,
-	.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
-	.dst_dev_type = DB8500_DMA_DEV11_UART2_TX,
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
+	.dir = DMA_MEM_TO_DEV,
+	.dev_type = DB8500_DMA_DEV11_UART2,
 };
 #endif
 
@@ -674,7 +626,7 @@ static void __init snowball_init_machine(void)
 	mop500_audio_init(parent);
 	mop500_uart_init(parent);
 
-	mop500_snowball_ethernet_clock_enable();
+	u8500_cryp1_hash1_init(parent);
 
 	/* This board has full regulator constraints */
 	regulator_has_full_constraints();
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index 49514b825034..d6fab166cbf1 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -93,6 +93,7 @@ extern struct amba_pl011_data uart0_plat;
 extern struct amba_pl011_data uart1_plat;
 extern struct amba_pl011_data uart2_plat;
 extern struct pl022_ssp_controller ssp0_plat;
+extern struct stedma40_platform_data dma40_plat_data;
 
 extern void mop500_sdi_init(struct device *parent);
 extern void snowball_sdi_init(struct device *parent);
@@ -104,7 +105,6 @@ void __init mop500_pinmaps_init(void);
 void __init snowball_pinmaps_init(void);
 void __init hrefv60_pinmaps_init(void);
 void mop500_audio_init(struct device *parent);
-void mop500_snowball_ethernet_clock_enable(void);
 
 int __init mop500_uib_init(void);
 void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 7669a49fb6fb..12eee8167525 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -162,26 +162,15 @@ static void __init db8500_add_gpios(struct device *parent)
 	dbx500_add_pinctrl(parent, "pinctrl-db8500", U8500_PRCMU_BASE);
 }
 
-static int usb_db8500_rx_dma_cfg[] = {
-	DB8500_DMA_DEV38_USB_OTG_IEP_1_9,
-	DB8500_DMA_DEV37_USB_OTG_IEP_2_10,
-	DB8500_DMA_DEV36_USB_OTG_IEP_3_11,
-	DB8500_DMA_DEV19_USB_OTG_IEP_4_12,
-	DB8500_DMA_DEV18_USB_OTG_IEP_5_13,
-	DB8500_DMA_DEV17_USB_OTG_IEP_6_14,
-	DB8500_DMA_DEV16_USB_OTG_IEP_7_15,
-	DB8500_DMA_DEV39_USB_OTG_IEP_8
-};
-
-static int usb_db8500_tx_dma_cfg[] = {
-	DB8500_DMA_DEV38_USB_OTG_OEP_1_9,
-	DB8500_DMA_DEV37_USB_OTG_OEP_2_10,
-	DB8500_DMA_DEV36_USB_OTG_OEP_3_11,
-	DB8500_DMA_DEV19_USB_OTG_OEP_4_12,
-	DB8500_DMA_DEV18_USB_OTG_OEP_5_13,
-	DB8500_DMA_DEV17_USB_OTG_OEP_6_14,
-	DB8500_DMA_DEV16_USB_OTG_OEP_7_15,
-	DB8500_DMA_DEV39_USB_OTG_OEP_8
+static int usb_db8500_dma_cfg[] = {
+	DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9,
+	DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10,
+	DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11,
+	DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12,
+	DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13,
+	DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14,
+	DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15,
+	DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8
 };
 
 static const char *db8500_read_soc_id(void)
@@ -215,7 +204,7 @@ struct device * __init u8500_init_devices(void)
 
 	db8500_add_rtc(parent);
 	db8500_add_gpios(parent);
-	db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
+	db8500_add_usb(parent, usb_db8500_dma_cfg, usb_db8500_dma_cfg);
 
 	for (i = 0; i < ARRAY_SIZE(platform_devs); i++)
 		platform_devs[i]->dev.parent = parent;
@@ -226,34 +215,13 @@ struct device * __init u8500_init_devices(void)
 }
 
 #ifdef CONFIG_MACH_UX500_DT
-
-/* TODO: Once all pieces are DT:ed, remove completely. */
-static struct device * __init u8500_of_init_devices(void)
-{
-	struct device *parent = db8500_soc_device_init();
-
-	db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
-
-	u8500_dma40_device.dev.parent = parent;
-
-	/*
-	 * Devices to be DT:ed:
-	 *   u8500_dma40_device  = todo
-	 *   db8500_pmu_device   = done
-	 *   db8500_prcmu_device = done
-	 */
-	platform_device_register(&u8500_dma40_device);
-
-	return parent;
-}
-
 static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	/* Requires call-back bindings. */
 	OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
 	/* Requires DMA bindings. */
-	OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
-	OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
-	OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat),
+	OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", NULL),
+	OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", NULL),
+	OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", NULL),
 	OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0",  &ssp0_plat),
 	OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0",  &mop500_sdi0_data),
 	OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1",  &mop500_sdi1_data),
@@ -294,6 +262,8 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 		"ux500-msp-i2s.2", &msp2_platform_data),
 	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
 		"ux500-msp-i2s.3", &msp3_platform_data),
+	/* Requires clock name bindings and channel address lookup table. */
+	OF_DEV_AUXDATA("stericsson,db8500-dma40", 0x801C0000, "dma40.0", NULL),
 	{},
 };
 
@@ -317,22 +287,18 @@ static const struct of_device_id u8500_local_bus_nodes[] = {
 
 static void __init u8500_init_machine(void)
 {
-	struct device *parent = NULL;
+	struct device *parent = db8500_soc_device_init();
 
 	/* Pinmaps must be in place before devices register */
 	if (of_machine_is_compatible("st-ericsson,mop500"))
 		mop500_pinmaps_init();
 	else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
 		snowball_pinmaps_init();
-		mop500_snowball_ethernet_clock_enable();
 	} else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
 		hrefv60_pinmaps_init();
 	else if (of_machine_is_compatible("st-ericsson,ccu9540")) {}
 		/* TODO: Add pinmaps for ccu9540 board. */
 
-	/* TODO: Export SoC, USB, cpu-freq and DMA40 */
-	parent = u8500_of_init_devices();
-
 	/* automatically probe child nodes of dbx5x0 devices */
 	if (of_machine_is_compatible("st-ericsson,u8540"))
 		of_platform_populate(NULL, u8500_local_bus_nodes,
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index ddbdcda8306a..516a6f57d159 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -42,128 +42,7 @@ static struct resource dma40_resources[] = {
 	}
 };
 
-/* Default configuration for physcial memcpy */
-struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
-	.mode = STEDMA40_MODE_PHYSICAL,
-	.dir = STEDMA40_MEM_TO_MEM,
-
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
-	.src_info.psize = STEDMA40_PSIZE_PHY_1,
-	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
-	.dst_info.psize = STEDMA40_PSIZE_PHY_1,
-	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-};
-/* Default configuration for logical memcpy */
-struct stedma40_chan_cfg dma40_memcpy_conf_log = {
-	.dir = STEDMA40_MEM_TO_MEM,
-
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
-	.src_info.psize = STEDMA40_PSIZE_LOG_1,
-	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
-	.dst_info.psize = STEDMA40_PSIZE_LOG_1,
-	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-};
-
-/*
- * Mapping between destination event lines and physical device address.
- * The event line is tied to a device and therefore the address is constant.
- * When the address comes from a primecell it will be configured in runtime
- * and we set the address to -1 as a placeholder.
- */
-static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV] = {
-	/* MUSB - these will be runtime-reconfigured */
-	[DB8500_DMA_DEV39_USB_OTG_OEP_8] = -1,
-	[DB8500_DMA_DEV16_USB_OTG_OEP_7_15] = -1,
-	[DB8500_DMA_DEV17_USB_OTG_OEP_6_14] = -1,
-	[DB8500_DMA_DEV18_USB_OTG_OEP_5_13] = -1,
-	[DB8500_DMA_DEV19_USB_OTG_OEP_4_12] = -1,
-	[DB8500_DMA_DEV36_USB_OTG_OEP_3_11] = -1,
-	[DB8500_DMA_DEV37_USB_OTG_OEP_2_10] = -1,
-	[DB8500_DMA_DEV38_USB_OTG_OEP_1_9] = -1,
-	/* PrimeCells - run-time configured */
-	[DB8500_DMA_DEV0_SPI0_TX] = -1,
-	[DB8500_DMA_DEV1_SD_MMC0_TX] = -1,
-	[DB8500_DMA_DEV2_SD_MMC1_TX] = -1,
-	[DB8500_DMA_DEV3_SD_MMC2_TX] = -1,
-	[DB8500_DMA_DEV8_SSP0_TX] = -1,
-	[DB8500_DMA_DEV9_SSP1_TX] = -1,
-	[DB8500_DMA_DEV11_UART2_TX] = -1,
-	[DB8500_DMA_DEV12_UART1_TX] = -1,
-	[DB8500_DMA_DEV13_UART0_TX] = -1,
-	[DB8500_DMA_DEV28_SD_MM2_TX] = -1,
-	[DB8500_DMA_DEV29_SD_MM0_TX] = -1,
-	[DB8500_DMA_DEV32_SD_MM1_TX] = -1,
-	[DB8500_DMA_DEV33_SPI2_TX] = -1,
-	[DB8500_DMA_DEV35_SPI1_TX] = -1,
-	[DB8500_DMA_DEV40_SPI3_TX] = -1,
-	[DB8500_DMA_DEV41_SD_MM3_TX] = -1,
-	[DB8500_DMA_DEV42_SD_MM4_TX] = -1,
-	[DB8500_DMA_DEV43_SD_MM5_TX] = -1,
-	[DB8500_DMA_DEV14_MSP2_TX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET,
-	[DB8500_DMA_DEV30_MSP1_TX] = U8500_MSP1_BASE + MSP_TX_RX_REG_OFFSET,
-	[DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET,
-	[DB8500_DMA_DEV48_CAC1_TX] = U8500_CRYP1_BASE + CRYP1_TX_REG_OFFSET,
-	[DB8500_DMA_DEV50_HAC1_TX] = U8500_HASH1_BASE + HASH1_TX_REG_OFFSET,
-};
-
-/* Mapping between source event lines and physical device address */
-static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV] = {
-	/* MUSB - these will be runtime-reconfigured */
-	[DB8500_DMA_DEV39_USB_OTG_IEP_8] = -1,
-	[DB8500_DMA_DEV16_USB_OTG_IEP_7_15] = -1,
-	[DB8500_DMA_DEV17_USB_OTG_IEP_6_14] = -1,
-	[DB8500_DMA_DEV18_USB_OTG_IEP_5_13] = -1,
-	[DB8500_DMA_DEV19_USB_OTG_IEP_4_12] = -1,
-	[DB8500_DMA_DEV36_USB_OTG_IEP_3_11] = -1,
-	[DB8500_DMA_DEV37_USB_OTG_IEP_2_10] = -1,
-	[DB8500_DMA_DEV38_USB_OTG_IEP_1_9] = -1,
-	/* PrimeCells */
-	[DB8500_DMA_DEV0_SPI0_RX] = -1,
-	[DB8500_DMA_DEV1_SD_MMC0_RX] = -1,
-	[DB8500_DMA_DEV2_SD_MMC1_RX] = -1,
-	[DB8500_DMA_DEV3_SD_MMC2_RX] = -1,
-	[DB8500_DMA_DEV8_SSP0_RX] = -1,
-	[DB8500_DMA_DEV9_SSP1_RX] = -1,
-	[DB8500_DMA_DEV11_UART2_RX] = -1,
-	[DB8500_DMA_DEV12_UART1_RX] = -1,
-	[DB8500_DMA_DEV13_UART0_RX] = -1,
-	[DB8500_DMA_DEV28_SD_MM2_RX] = -1,
-	[DB8500_DMA_DEV29_SD_MM0_RX] = -1,
-	[DB8500_DMA_DEV32_SD_MM1_RX] = -1,
-	[DB8500_DMA_DEV33_SPI2_RX] = -1,
-	[DB8500_DMA_DEV35_SPI1_RX] = -1,
-	[DB8500_DMA_DEV40_SPI3_RX] = -1,
-	[DB8500_DMA_DEV41_SD_MM3_RX] = -1,
-	[DB8500_DMA_DEV42_SD_MM4_RX] = -1,
-	[DB8500_DMA_DEV43_SD_MM5_RX] = -1,
-	[DB8500_DMA_DEV14_MSP2_RX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET,
-	[DB8500_DMA_DEV30_MSP3_RX] = U8500_MSP3_BASE + MSP_TX_RX_REG_OFFSET,
-	[DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET,
-	[DB8500_DMA_DEV48_CAC1_RX] = U8500_CRYP1_BASE + CRYP1_RX_REG_OFFSET,
-};
-
-/* Reserved event lines for memcpy only */
-static int dma40_memcpy_event[] = {
-	DB8500_DMA_MEMCPY_TX_0,
-	DB8500_DMA_MEMCPY_TX_1,
-	DB8500_DMA_MEMCPY_TX_2,
-	DB8500_DMA_MEMCPY_TX_3,
-	DB8500_DMA_MEMCPY_TX_4,
-	DB8500_DMA_MEMCPY_TX_5,
-};
-
-static struct stedma40_platform_data dma40_plat_data = {
-	.dev_len = DB8500_DMA_NR_DEV,
-	.dev_rx = dma40_rx_map,
-	.dev_tx = dma40_tx_map,
-	.memcpy = dma40_memcpy_event,
-	.memcpy_len = ARRAY_SIZE(dma40_memcpy_event),
-	.memcpy_conf_phy = &dma40_memcpy_conf_phy,
-	.memcpy_conf_log = &dma40_memcpy_conf_log,
+struct stedma40_platform_data dma40_plat_data = {
 	.disabled_channels = {-1},
 };
 
diff --git a/arch/arm/mach-ux500/ste-dma40-db8500.h b/arch/arm/mach-ux500/ste-dma40-db8500.h
index a616419bea76..0296ae5b0fd9 100644
--- a/arch/arm/mach-ux500/ste-dma40-db8500.h
+++ b/arch/arm/mach-ux500/ste-dma40-db8500.h
@@ -12,133 +12,74 @@
 
 #define DB8500_DMA_NR_DEV 64
 
-enum dma_src_dev_type {
-	DB8500_DMA_DEV0_SPI0_RX = 0,
-	DB8500_DMA_DEV1_SD_MMC0_RX = 1,
-	DB8500_DMA_DEV2_SD_MMC1_RX = 2,
-	DB8500_DMA_DEV3_SD_MMC2_RX = 3,
-	DB8500_DMA_DEV4_I2C1_RX = 4,
-	DB8500_DMA_DEV5_I2C3_RX = 5,
-	DB8500_DMA_DEV6_I2C2_RX = 6,
-	DB8500_DMA_DEV7_I2C4_RX = 7, /* Only on V1 and later */
-	DB8500_DMA_DEV8_SSP0_RX = 8,
-	DB8500_DMA_DEV9_SSP1_RX = 9,
-	DB8500_DMA_DEV10_MCDE_RX = 10,
-	DB8500_DMA_DEV11_UART2_RX = 11,
-	DB8500_DMA_DEV12_UART1_RX = 12,
-	DB8500_DMA_DEV13_UART0_RX = 13,
-	DB8500_DMA_DEV14_MSP2_RX = 14,
-	DB8500_DMA_DEV15_I2C0_RX = 15,
-	DB8500_DMA_DEV16_USB_OTG_IEP_7_15 = 16,
-	DB8500_DMA_DEV17_USB_OTG_IEP_6_14 = 17,
-	DB8500_DMA_DEV18_USB_OTG_IEP_5_13 = 18,
-	DB8500_DMA_DEV19_USB_OTG_IEP_4_12 = 19,
-	DB8500_DMA_DEV20_SLIM0_CH0_RX_HSI_RX_CH0 = 20,
-	DB8500_DMA_DEV21_SLIM0_CH1_RX_HSI_RX_CH1 = 21,
-	DB8500_DMA_DEV22_SLIM0_CH2_RX_HSI_RX_CH2 = 22,
-	DB8500_DMA_DEV23_SLIM0_CH3_RX_HSI_RX_CH3 = 23,
-	DB8500_DMA_DEV24_SRC_SXA0_RX_TX = 24,
-	DB8500_DMA_DEV25_SRC_SXA1_RX_TX = 25,
-	DB8500_DMA_DEV26_SRC_SXA2_RX_TX = 26,
-	DB8500_DMA_DEV27_SRC_SXA3_RX_TX = 27,
-	DB8500_DMA_DEV28_SD_MM2_RX = 28,
-	DB8500_DMA_DEV29_SD_MM0_RX = 29,
-	DB8500_DMA_DEV30_MSP1_RX = 30,
+/*
+ * Unless otherwise specified, all channels numbers are used for
+ * TX & RX, and can be used for either source or destination
+ * channels.
+ */
+enum dma_dev_type {
+	DB8500_DMA_DEV0_SPI0 = 0,
+	DB8500_DMA_DEV1_SD_MMC0 = 1,
+	DB8500_DMA_DEV2_SD_MMC1 = 2,
+	DB8500_DMA_DEV3_SD_MMC2 = 3,
+	DB8500_DMA_DEV4_I2C1 = 4,
+	DB8500_DMA_DEV5_I2C3 = 5,
+	DB8500_DMA_DEV6_I2C2 = 6,
+	DB8500_DMA_DEV7_I2C4 = 7,			/* Only on V1 and later */
+	DB8500_DMA_DEV8_SSP0 = 8,
+	DB8500_DMA_DEV9_SSP1 = 9,
+	DB8500_DMA_DEV10_MCDE_RX = 10,			/* RX only */
+	DB8500_DMA_DEV11_UART2 = 11,
+	DB8500_DMA_DEV12_UART1 = 12,
+	DB8500_DMA_DEV13_UART0 = 13,
+	DB8500_DMA_DEV14_MSP2 = 14,
+	DB8500_DMA_DEV15_I2C0 = 15,
+	DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15 = 16,
+	DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14 = 17,
+	DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13 = 18,
+	DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12 = 19,
+	DB8500_DMA_DEV20_SLIM0_CH0_HSI_CH0 = 20,
+	DB8500_DMA_DEV21_SLIM0_CH1_HSI_CH1 = 21,
+	DB8500_DMA_DEV22_SLIM0_CH2_HSI_CH2 = 22,
+	DB8500_DMA_DEV23_SLIM0_CH3_HSI_CH3 = 23,
+	DB8500_DMA_DEV24_SXA0 = 24,
+	DB8500_DMA_DEV25_SXA1 = 25,
+	DB8500_DMA_DEV26_SXA2 = 26,
+	DB8500_DMA_DEV27_SXA3 = 27,
+	DB8500_DMA_DEV28_SD_MM2 = 28,
+	DB8500_DMA_DEV29_SD_MM0 = 29,
+	DB8500_DMA_DEV30_MSP1 = 30,
 	/* On DB8500v2, MSP3 RX replaces MSP1 RX */
-	DB8500_DMA_DEV30_MSP3_RX = 30,
-	DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX = 31,
-	DB8500_DMA_DEV32_SD_MM1_RX = 32,
-	DB8500_DMA_DEV33_SPI2_RX = 33,
-	DB8500_DMA_DEV34_I2C3_RX2 = 34,
-	DB8500_DMA_DEV35_SPI1_RX = 35,
-	DB8500_DMA_DEV36_USB_OTG_IEP_3_11 = 36,
-	DB8500_DMA_DEV37_USB_OTG_IEP_2_10 = 37,
-	DB8500_DMA_DEV38_USB_OTG_IEP_1_9 = 38,
-	DB8500_DMA_DEV39_USB_OTG_IEP_8 = 39,
-	DB8500_DMA_DEV40_SPI3_RX = 40,
-	DB8500_DMA_DEV41_SD_MM3_RX = 41,
-	DB8500_DMA_DEV42_SD_MM4_RX = 42,
-	DB8500_DMA_DEV43_SD_MM5_RX = 43,
-	DB8500_DMA_DEV44_SRC_SXA4_RX_TX = 44,
-	DB8500_DMA_DEV45_SRC_SXA5_RX_TX = 45,
-	DB8500_DMA_DEV46_SLIM0_CH8_RX_SRC_SXA6_RX_TX = 46,
-	DB8500_DMA_DEV47_SLIM0_CH9_RX_SRC_SXA7_RX_TX = 47,
-	DB8500_DMA_DEV48_CAC1_RX = 48,
-	/* 49, 50 and 51 are not used */
-	DB8500_DMA_DEV52_SLIM0_CH4_RX_HSI_RX_CH4 = 52,
-	DB8500_DMA_DEV53_SLIM0_CH5_RX_HSI_RX_CH5 = 53,
-	DB8500_DMA_DEV54_SLIM0_CH6_RX_HSI_RX_CH6 = 54,
-	DB8500_DMA_DEV55_SLIM0_CH7_RX_HSI_RX_CH7 = 55,
-	/* 56, 57, 58, 59 and 60 are not used */
-	DB8500_DMA_DEV61_CAC0_RX = 61,
-	/* 62 and 63 are not used */
-};
-
-enum dma_dest_dev_type {
-	DB8500_DMA_DEV0_SPI0_TX = 0,
-	DB8500_DMA_DEV1_SD_MMC0_TX = 1,
-	DB8500_DMA_DEV2_SD_MMC1_TX = 2,
-	DB8500_DMA_DEV3_SD_MMC2_TX = 3,
-	DB8500_DMA_DEV4_I2C1_TX = 4,
-	DB8500_DMA_DEV5_I2C3_TX = 5,
-	DB8500_DMA_DEV6_I2C2_TX = 6,
-	DB8500_DMA_DEV7_I2C4_TX = 7, /* Only on V1 and later */
-	DB8500_DMA_DEV8_SSP0_TX = 8,
-	DB8500_DMA_DEV9_SSP1_TX = 9,
-	/* 10 is not used*/
-	DB8500_DMA_DEV11_UART2_TX = 11,
-	DB8500_DMA_DEV12_UART1_TX = 12,
-	DB8500_DMA_DEV13_UART0_TX = 13,
-	DB8500_DMA_DEV14_MSP2_TX = 14,
-	DB8500_DMA_DEV15_I2C0_TX = 15,
-	DB8500_DMA_DEV16_USB_OTG_OEP_7_15 = 16,
-	DB8500_DMA_DEV17_USB_OTG_OEP_6_14 = 17,
-	DB8500_DMA_DEV18_USB_OTG_OEP_5_13 = 18,
-	DB8500_DMA_DEV19_USB_OTG_OEP_4_12 = 19,
-	DB8500_DMA_DEV20_SLIM0_CH0_TX_HSI_TX_CH0 = 20,
-	DB8500_DMA_DEV21_SLIM0_CH1_TX_HSI_TX_CH1 = 21,
-	DB8500_DMA_DEV22_SLIM0_CH2_TX_HSI_TX_CH2 = 22,
-	DB8500_DMA_DEV23_SLIM0_CH3_TX_HSI_TX_CH3 = 23,
-	DB8500_DMA_DEV24_DST_SXA0_RX_TX = 24,
-	DB8500_DMA_DEV25_DST_SXA1_RX_TX = 25,
-	DB8500_DMA_DEV26_DST_SXA2_RX_TX = 26,
-	DB8500_DMA_DEV27_DST_SXA3_RX_TX = 27,
-	DB8500_DMA_DEV28_SD_MM2_TX = 28,
-	DB8500_DMA_DEV29_SD_MM0_TX = 29,
-	DB8500_DMA_DEV30_MSP1_TX = 30,
-	DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX = 31,
-	DB8500_DMA_DEV32_SD_MM1_TX = 32,
-	DB8500_DMA_DEV33_SPI2_TX = 33,
-	DB8500_DMA_DEV34_I2C3_TX2 = 34,
-	DB8500_DMA_DEV35_SPI1_TX = 35,
-	DB8500_DMA_DEV36_USB_OTG_OEP_3_11 = 36,
-	DB8500_DMA_DEV37_USB_OTG_OEP_2_10 = 37,
-	DB8500_DMA_DEV38_USB_OTG_OEP_1_9 = 38,
-	DB8500_DMA_DEV39_USB_OTG_OEP_8 = 39,
-	DB8500_DMA_DEV40_SPI3_TX = 40,
-	DB8500_DMA_DEV41_SD_MM3_TX = 41,
-	DB8500_DMA_DEV42_SD_MM4_TX = 42,
-	DB8500_DMA_DEV43_SD_MM5_TX = 43,
-	DB8500_DMA_DEV44_DST_SXA4_RX_TX = 44,
-	DB8500_DMA_DEV45_DST_SXA5_RX_TX = 45,
-	DB8500_DMA_DEV46_SLIM0_CH8_TX_DST_SXA6_RX_TX = 46,
-	DB8500_DMA_DEV47_SLIM0_CH9_TX_DST_SXA7_RX_TX = 47,
-	DB8500_DMA_DEV48_CAC1_TX  = 48,
-	DB8500_DMA_DEV49_CAC1_TX_HAC1_TX = 49,
-	DB8500_DMA_DEV50_HAC1_TX = 50,
-	DB8500_DMA_MEMCPY_TX_0 = 51,
-	DB8500_DMA_DEV52_SLIM1_CH4_TX_HSI_TX_CH4 = 52,
-	DB8500_DMA_DEV53_SLIM1_CH5_TX_HSI_TX_CH5 = 53,
-	DB8500_DMA_DEV54_SLIM1_CH6_TX_HSI_TX_CH6 = 54,
-	DB8500_DMA_DEV55_SLIM1_CH7_TX_HSI_TX_CH7 = 55,
-	DB8500_DMA_MEMCPY_TX_1 = 56,
-	DB8500_DMA_MEMCPY_TX_2 = 57,
-	DB8500_DMA_MEMCPY_TX_3 = 58,
-	DB8500_DMA_MEMCPY_TX_4 = 59,
-	DB8500_DMA_MEMCPY_TX_5 = 60,
-	DB8500_DMA_DEV61_CAC0_TX = 61,
-	DB8500_DMA_DEV62_CAC0_TX_HAC0_TX = 62,
-	DB8500_DMA_DEV63_HAC0_TX = 63,
+	DB8500_DMA_DEV30_MSP3 = 30,
+	DB8500_DMA_DEV31_MSP0_SLIM0_CH0 = 31,
+	DB8500_DMA_DEV32_SD_MM1 = 32,
+	DB8500_DMA_DEV33_SPI2 = 33,
+	DB8500_DMA_DEV34_I2C3_RX2_TX2 = 34,
+	DB8500_DMA_DEV35_SPI1 = 35,
+	DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11 = 36,
+	DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10 = 37,
+	DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9 = 38,
+	DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8 = 39,
+	DB8500_DMA_DEV40_SPI3 = 40,
+	DB8500_DMA_DEV41_SD_MM3 = 41,
+	DB8500_DMA_DEV42_SD_MM4 = 42,
+	DB8500_DMA_DEV43_SD_MM5 = 43,
+	DB8500_DMA_DEV44_SXA4 = 44,
+	DB8500_DMA_DEV45_SXA5 = 45,
+	DB8500_DMA_DEV46_SLIM0_CH8_SRC_SXA6 = 46,
+	DB8500_DMA_DEV47_SLIM0_CH9_SRC_SXA7 = 47,
+	DB8500_DMA_DEV48_CAC1 = 48,
+	DB8500_DMA_DEV49_CAC1_TX_HAC1_TX = 49,		/* TX only */
+	DB8500_DMA_DEV50_HAC1_TX = 50,			/* TX only */
+	DB8500_DMA_MEMCPY_TX_0 = 51,			/* TX only */
+	DB8500_DMA_DEV52_SLIM0_CH4_HSI_CH4 = 52,
+	DB8500_DMA_DEV53_SLIM0_CH5_HSI_CH5 = 53,
+	DB8500_DMA_DEV54_SLIM0_CH6_HSI_CH6 = 54,
+	DB8500_DMA_DEV55_SLIM0_CH7_HSI_CH7 = 55,
+	/* 56 -> 60 are channels reserved for memcpy only */
+	DB8500_DMA_DEV61_CAC0 = 61,
+	DB8500_DMA_DEV62_CAC0_TX_HAC0_TX = 62,		/* TX only */
+	DB8500_DMA_DEV63_HAC0_TX = 63,			/* TX only */
 };
 
 #endif
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
index 2dfc72f7cd8a..b7bd8d3a5507 100644
--- a/arch/arm/mach-ux500/usb.c
+++ b/arch/arm/mach-ux500/usb.c
@@ -14,25 +14,15 @@
 
 #define MUSB_DMA40_RX_CH { \
 		.mode = STEDMA40_MODE_LOGICAL, \
-		.dir = STEDMA40_PERIPH_TO_MEM, \
-		.dst_dev_type = STEDMA40_DEV_DST_MEMORY, \
-		.src_info.data_width = STEDMA40_WORD_WIDTH, \
-		.dst_info.data_width = STEDMA40_WORD_WIDTH, \
-		.src_info.psize = STEDMA40_PSIZE_LOG_16, \
-		.dst_info.psize = STEDMA40_PSIZE_LOG_16, \
+		.dir = DMA_DEV_TO_MEM, \
 	}
 
 #define MUSB_DMA40_TX_CH { \
 		.mode = STEDMA40_MODE_LOGICAL, \
-		.dir = STEDMA40_MEM_TO_PERIPH, \
-		.src_dev_type = STEDMA40_DEV_SRC_MEMORY, \
-		.src_info.data_width = STEDMA40_WORD_WIDTH, \
-		.dst_info.data_width = STEDMA40_WORD_WIDTH, \
-		.src_info.psize = STEDMA40_PSIZE_LOG_16, \
-		.dst_info.psize = STEDMA40_PSIZE_LOG_16, \
+		.dir = DMA_MEM_TO_DEV, \
 	}
 
-static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_CHANNELS]
+static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS]
 	= {
 	MUSB_DMA40_RX_CH,
 	MUSB_DMA40_RX_CH,
@@ -44,7 +34,7 @@ static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_CHANNELS]
 	MUSB_DMA40_RX_CH
 };
 
-static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_TX_CHANNELS]
+static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS]
 	= {
 	MUSB_DMA40_TX_CH,
 	MUSB_DMA40_TX_CH,
@@ -56,7 +46,7 @@ static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_TX_CHANNELS]
 	MUSB_DMA40_TX_CH,
 };
 
-static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_CHANNELS] = {
+static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = {
 	&musb_dma_rx_ch[0],
 	&musb_dma_rx_ch[1],
 	&musb_dma_rx_ch[2],
@@ -67,7 +57,7 @@ static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_CHANNELS] = {
 	&musb_dma_rx_ch[7]
 };
 
-static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_TX_CHANNELS] = {
+static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = {
 	&musb_dma_tx_ch[0],
 	&musb_dma_tx_ch[1],
 	&musb_dma_tx_ch[2],
@@ -81,23 +71,11 @@ static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_TX_CHANNELS] = {
 static struct ux500_musb_board_data musb_board_data = {
 	.dma_rx_param_array = ux500_dma_rx_param_array,
 	.dma_tx_param_array = ux500_dma_tx_param_array,
-	.num_rx_channels = UX500_MUSB_DMA_NUM_RX_CHANNELS,
-	.num_tx_channels = UX500_MUSB_DMA_NUM_TX_CHANNELS,
 	.dma_filter = stedma40_filter,
 };
 
-static u64 ux500_musb_dmamask = DMA_BIT_MASK(32);
-
-static struct musb_hdrc_config musb_hdrc_config = {
-	.multipoint	= true,
-	.dyn_fifo	= true,
-	.num_eps	= 16,
-	.ram_bits	= 16,
-};
-
 static struct musb_hdrc_platform_data musb_platform_data = {
 	.mode = MUSB_OTG,
-	.config = &musb_hdrc_config,
 	.board_data = &musb_board_data,
 };
 
@@ -118,27 +96,26 @@ struct platform_device ux500_musb_device = {
 	.id = 0,
 	.dev = {
 		.platform_data = &musb_platform_data,
-		.dma_mask = &ux500_musb_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 	.num_resources = ARRAY_SIZE(usb_resources),
 	.resource = usb_resources,
 };
 
-static inline void ux500_usb_dma_update_rx_ch_config(int *src_dev_type)
+static inline void ux500_usb_dma_update_rx_ch_config(int *dev_type)
 {
 	u32 idx;
 
-	for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_CHANNELS; idx++)
-		musb_dma_rx_ch[idx].src_dev_type = src_dev_type[idx];
+	for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; idx++)
+		musb_dma_rx_ch[idx].dev_type = dev_type[idx];
 }
 
-static inline void ux500_usb_dma_update_tx_ch_config(int *dst_dev_type)
+static inline void ux500_usb_dma_update_tx_ch_config(int *dev_type)
 {
 	u32 idx;
 
-	for (idx = 0; idx < UX500_MUSB_DMA_NUM_TX_CHANNELS; idx++)
-		musb_dma_tx_ch[idx].dst_dev_type = dst_dev_type[idx];
+	for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; idx++)
+		musb_dma_tx_ch[idx].dev_type = dev_type[idx];
 }
 
 void ux500_add_usb(struct device *parent, resource_size_t base, int irq,