Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 689 insertions, 0 deletions

diff --git a/arch/alpha/kernel/sys_dp264.c b/arch/alpha/kernel/sys_dp264.c
new file mode 100644
index 000000000000..9e36b07fa940
--- /dev/null
+++ b/arch/alpha/kernel/sys_dp264.c
@@ -0,0 +1,689 @@
+/*
+ *	linux/arch/alpha/kernel/sys_dp264.c
+ *
+ *	Copyright (C) 1995 David A Rusling
+ *	Copyright (C) 1996, 1999 Jay A Estabrook
+ *	Copyright (C) 1998, 1999 Richard Henderson
+ *
+ *	Modified by Christopher C. Chimelis, 2001 to
+ *	add support for the addition of Shark to the
+ *	Tsunami family.
+ *
+ * Code supporting the DP264 (EV6+TSUNAMI).
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/core_tsunami.h>
+#include <asm/hwrpb.h>
+#include <asm/tlbflush.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+#include "pci_impl.h"
+#include "machvec_impl.h"
+
+
+/* Note mask bit is true for ENABLED irqs.  */
+static unsigned long cached_irq_mask;
+/* dp264 boards handle at max four CPUs */
+static unsigned long cpu_irq_affinity[4] = { 0UL, 0UL, 0UL, 0UL };
+
+DEFINE_SPINLOCK(dp264_irq_lock);
+
+static void
+tsunami_update_irq_hw(unsigned long mask)
+{
+	register tsunami_cchip *cchip = TSUNAMI_cchip;
+	unsigned long isa_enable = 1UL << 55;
+	register int bcpu = boot_cpuid;
+
+#ifdef CONFIG_SMP
+	volatile unsigned long *dim0, *dim1, *dim2, *dim3;
+	unsigned long mask0, mask1, mask2, mask3, dummy;
+
+	mask &= ~isa_enable;
+	mask0 = mask & cpu_irq_affinity[0];
+	mask1 = mask & cpu_irq_affinity[1];
+	mask2 = mask & cpu_irq_affinity[2];
+	mask3 = mask & cpu_irq_affinity[3];
+
+	if (bcpu == 0) mask0 |= isa_enable;
+	else if (bcpu == 1) mask1 |= isa_enable;
+	else if (bcpu == 2) mask2 |= isa_enable;
+	else mask3 |= isa_enable;
+
+	dim0 = &cchip->dim0.csr;
+	dim1 = &cchip->dim1.csr;
+	dim2 = &cchip->dim2.csr;
+	dim3 = &cchip->dim3.csr;
+	if (!cpu_possible(0)) dim0 = &dummy;
+	if (!cpu_possible(1)) dim1 = &dummy;
+	if (!cpu_possible(2)) dim2 = &dummy;
+	if (!cpu_possible(3)) dim3 = &dummy;
+
+	*dim0 = mask0;
+	*dim1 = mask1;
+	*dim2 = mask2;
+	*dim3 = mask3;
+	mb();
+	*dim0;
+	*dim1;
+	*dim2;
+	*dim3;
+#else
+	volatile unsigned long *dimB;
+	if (bcpu == 0) dimB = &cchip->dim0.csr;
+	else if (bcpu == 1) dimB = &cchip->dim1.csr;
+	else if (bcpu == 2) dimB = &cchip->dim2.csr;
+	else dimB = &cchip->dim3.csr;
+
+	*dimB = mask | isa_enable;
+	mb();
+	*dimB;
+#endif
+}
+
+static void
+dp264_enable_irq(unsigned int irq)
+{
+	spin_lock(&dp264_irq_lock);
+	cached_irq_mask |= 1UL << irq;
+	tsunami_update_irq_hw(cached_irq_mask);
+	spin_unlock(&dp264_irq_lock);
+}
+
+static void
+dp264_disable_irq(unsigned int irq)
+{
+	spin_lock(&dp264_irq_lock);
+	cached_irq_mask &= ~(1UL << irq);
+	tsunami_update_irq_hw(cached_irq_mask);
+	spin_unlock(&dp264_irq_lock);
+}
+
+static unsigned int
+dp264_startup_irq(unsigned int irq)
+{ 
+	dp264_enable_irq(irq);
+	return 0; /* never anything pending */
+}
+
+static void
+dp264_end_irq(unsigned int irq)
+{ 
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		dp264_enable_irq(irq);
+}
+
+static void
+clipper_enable_irq(unsigned int irq)
+{
+	spin_lock(&dp264_irq_lock);
+	cached_irq_mask |= 1UL << (irq - 16);
+	tsunami_update_irq_hw(cached_irq_mask);
+	spin_unlock(&dp264_irq_lock);
+}
+
+static void
+clipper_disable_irq(unsigned int irq)
+{
+	spin_lock(&dp264_irq_lock);
+	cached_irq_mask &= ~(1UL << (irq - 16));
+	tsunami_update_irq_hw(cached_irq_mask);
+	spin_unlock(&dp264_irq_lock);
+}
+
+static unsigned int
+clipper_startup_irq(unsigned int irq)
+{ 
+	clipper_enable_irq(irq);
+	return 0; /* never anything pending */
+}
+
+static void
+clipper_end_irq(unsigned int irq)
+{ 
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		clipper_enable_irq(irq);
+}
+
+static void
+cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
+{
+	int cpu;
+
+	for (cpu = 0; cpu < 4; cpu++) {
+		unsigned long aff = cpu_irq_affinity[cpu];
+		if (cpu_isset(cpu, affinity))
+			aff |= 1UL << irq;
+		else
+			aff &= ~(1UL << irq);
+		cpu_irq_affinity[cpu] = aff;
+	}
+}
+
+static void
+dp264_set_affinity(unsigned int irq, cpumask_t affinity)
+{ 
+	spin_lock(&dp264_irq_lock);
+	cpu_set_irq_affinity(irq, affinity);
+	tsunami_update_irq_hw(cached_irq_mask);
+	spin_unlock(&dp264_irq_lock);
+}
+
+static void
+clipper_set_affinity(unsigned int irq, cpumask_t affinity)
+{ 
+	spin_lock(&dp264_irq_lock);
+	cpu_set_irq_affinity(irq - 16, affinity);
+	tsunami_update_irq_hw(cached_irq_mask);
+	spin_unlock(&dp264_irq_lock);
+}
+
+static struct hw_interrupt_type dp264_irq_type = {
+	.typename	= "DP264",
+	.startup	= dp264_startup_irq,
+	.shutdown	= dp264_disable_irq,
+	.enable		= dp264_enable_irq,
+	.disable	= dp264_disable_irq,
+	.ack		= dp264_disable_irq,
+	.end		= dp264_end_irq,
+	.set_affinity	= dp264_set_affinity,
+};
+
+static struct hw_interrupt_type clipper_irq_type = {
+	.typename	= "CLIPPER",
+	.startup	= clipper_startup_irq,
+	.shutdown	= clipper_disable_irq,
+	.enable		= clipper_enable_irq,
+	.disable	= clipper_disable_irq,
+	.ack		= clipper_disable_irq,
+	.end		= clipper_end_irq,
+	.set_affinity	= clipper_set_affinity,
+};
+
+static void
+dp264_device_interrupt(unsigned long vector, struct pt_regs * regs)
+{
+#if 1
+	printk("dp264_device_interrupt: NOT IMPLEMENTED YET!! \n");
+#else
+	unsigned long pld;
+	unsigned int i;
+
+	/* Read the interrupt summary register of TSUNAMI */
+	pld = TSUNAMI_cchip->dir0.csr;
+
+	/*
+	 * Now for every possible bit set, work through them and call
+	 * the appropriate interrupt handler.
+	 */
+	while (pld) {
+		i = ffz(~pld);
+		pld &= pld - 1; /* clear least bit set */
+		if (i == 55)
+			isa_device_interrupt(vector, regs);
+		else
+			handle_irq(16 + i, 16 + i, regs);
+#if 0
+		TSUNAMI_cchip->dir0.csr = 1UL << i; mb();
+		tmp = TSUNAMI_cchip->dir0.csr;
+#endif
+	}
+#endif
+}
+
+static void 
+dp264_srm_device_interrupt(unsigned long vector, struct pt_regs * regs)
+{
+	int irq;
+
+	irq = (vector - 0x800) >> 4;
+
+	/*
+	 * The SRM console reports PCI interrupts with a vector calculated by:
+	 *
+	 *	0x900 + (0x10 * DRIR-bit)
+	 *
+	 * So bit 16 shows up as IRQ 32, etc.
+	 * 
+	 * On DP264/BRICK/MONET, we adjust it down by 16 because at least
+	 * that many of the low order bits of the DRIR are not used, and
+	 * so we don't count them.
+	 */
+	if (irq >= 32)
+		irq -= 16;
+
+	handle_irq(irq, regs);
+}
+
+static void 
+clipper_srm_device_interrupt(unsigned long vector, struct pt_regs * regs)
+{
+	int irq;
+
+	irq = (vector - 0x800) >> 4;
+
+/*
+	 * The SRM console reports PCI interrupts with a vector calculated by:
+	 *
+	 *	0x900 + (0x10 * DRIR-bit)
+	 *
+	 * So bit 16 shows up as IRQ 32, etc.
+	 * 
+	 * CLIPPER uses bits 8-47 for PCI interrupts, so we do not need
+	 * to scale down the vector reported, we just use it.
+	 *
+	 * Eg IRQ 24 is DRIR bit 8, etc, etc
+	 */
+	handle_irq(irq, regs);
+}
+
+static void __init
+init_tsunami_irqs(struct hw_interrupt_type * ops, int imin, int imax)
+{
+	long i;
+	for (i = imin; i <= imax; ++i) {
+		irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL;
+		irq_desc[i].handler = ops;
+	}
+}
+
+static void __init
+dp264_init_irq(void)
+{
+	outb(0, DMA1_RESET_REG);
+	outb(0, DMA2_RESET_REG);
+	outb(DMA_MODE_CASCADE, DMA2_MODE_REG);
+	outb(0, DMA2_MASK_REG);
+
+	if (alpha_using_srm)
+		alpha_mv.device_interrupt = dp264_srm_device_interrupt;
+
+	tsunami_update_irq_hw(0);
+
+	init_i8259a_irqs();
+	init_tsunami_irqs(&dp264_irq_type, 16, 47);
+}
+
+static void __init
+clipper_init_irq(void)
+{
+	outb(0, DMA1_RESET_REG);
+	outb(0, DMA2_RESET_REG);
+	outb(DMA_MODE_CASCADE, DMA2_MODE_REG);
+	outb(0, DMA2_MASK_REG);
+
+	if (alpha_using_srm)
+		alpha_mv.device_interrupt = clipper_srm_device_interrupt;
+
+	tsunami_update_irq_hw(0);
+
+	init_i8259a_irqs();
+	init_tsunami_irqs(&clipper_irq_type, 24, 63);
+}
+
+
+/*
+ * PCI Fixup configuration.
+ *
+ * Summary @ TSUNAMI_CSR_DIM0:
+ * Bit      Meaning
+ * 0-17     Unused
+ *18        Interrupt SCSI B (Adaptec 7895 builtin)
+ *19        Interrupt SCSI A (Adaptec 7895 builtin)
+ *20        Interrupt Line D from slot 2 PCI0
+ *21        Interrupt Line C from slot 2 PCI0
+ *22        Interrupt Line B from slot 2 PCI0
+ *23        Interrupt Line A from slot 2 PCI0
+ *24        Interrupt Line D from slot 1 PCI0
+ *25        Interrupt Line C from slot 1 PCI0
+ *26        Interrupt Line B from slot 1 PCI0
+ *27        Interrupt Line A from slot 1 PCI0
+ *28        Interrupt Line D from slot 0 PCI0
+ *29        Interrupt Line C from slot 0 PCI0
+ *30        Interrupt Line B from slot 0 PCI0
+ *31        Interrupt Line A from slot 0 PCI0
+ *
+ *32        Interrupt Line D from slot 3 PCI1
+ *33        Interrupt Line C from slot 3 PCI1
+ *34        Interrupt Line B from slot 3 PCI1
+ *35        Interrupt Line A from slot 3 PCI1
+ *36        Interrupt Line D from slot 2 PCI1
+ *37        Interrupt Line C from slot 2 PCI1
+ *38        Interrupt Line B from slot 2 PCI1
+ *39        Interrupt Line A from slot 2 PCI1
+ *40        Interrupt Line D from slot 1 PCI1
+ *41        Interrupt Line C from slot 1 PCI1
+ *42        Interrupt Line B from slot 1 PCI1
+ *43        Interrupt Line A from slot 1 PCI1
+ *44        Interrupt Line D from slot 0 PCI1
+ *45        Interrupt Line C from slot 0 PCI1
+ *46        Interrupt Line B from slot 0 PCI1
+ *47        Interrupt Line A from slot 0 PCI1
+ *48-52     Unused
+ *53        PCI0 NMI (from Cypress)
+ *54        PCI0 SMI INT (from Cypress)
+ *55        PCI0 ISA Interrupt (from Cypress)
+ *56-60     Unused
+ *61        PCI1 Bus Error
+ *62        PCI0 Bus Error
+ *63        Reserved
+ *
+ * IdSel	
+ *   5	 Cypress Bridge I/O
+ *   6	 SCSI Adaptec builtin
+ *   7	 64 bit PCI option slot 0 (all busses)
+ *   8	 64 bit PCI option slot 1 (all busses)
+ *   9	 64 bit PCI option slot 2 (all busses)
+ *  10	 64 bit PCI option slot 3 (not bus 0)
+ */
+
+static int __init
+dp264_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static char irq_tab[6][5] __initdata = {
+		/*INT    INTA   INTB   INTC   INTD */
+		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 5 ISA Bridge */
+		{ 16+ 3, 16+ 3, 16+ 2, 16+ 2, 16+ 2}, /* IdSel 6 SCSI builtin*/
+		{ 16+15, 16+15, 16+14, 16+13, 16+12}, /* IdSel 7 slot 0 */
+		{ 16+11, 16+11, 16+10, 16+ 9, 16+ 8}, /* IdSel 8 slot 1 */
+		{ 16+ 7, 16+ 7, 16+ 6, 16+ 5, 16+ 4}, /* IdSel 9 slot 2 */
+		{ 16+ 3, 16+ 3, 16+ 2, 16+ 1, 16+ 0}  /* IdSel 10 slot 3 */
+	};
+	const long min_idsel = 5, max_idsel = 10, irqs_per_slot = 5;
+
+	struct pci_controller *hose = dev->sysdata;
+	int irq = COMMON_TABLE_LOOKUP;
+
+	if (irq > 0) {
+		irq += 16 * hose->index;
+	} else {
+		/* ??? The Contaq IDE controller on the ISA bridge uses
+		   "legacy" interrupts 14 and 15.  I don't know if anything
+		   can wind up at the same slot+pin on hose1, so we'll
+		   just have to trust whatever value the console might
+		   have assigned.  */
+
+		u8 irq8;
+		pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq8);
+		irq = irq8;
+	}
+
+	return irq;
+}
+
+static int __init
+monet_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static char irq_tab[13][5] __initdata = {
+		/*INT    INTA   INTB   INTC   INTD */
+		{    45,    45,    45,    45,    45}, /* IdSel 3 21143 PCI1 */
+		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 4 unused */
+		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 5 unused */
+		{    47,    47,    47,    47,    47}, /* IdSel 6 SCSI PCI1 */
+		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 7 ISA Bridge */
+		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 8 P2P PCI1 */
+#if 1
+		{    28,    28,    29,    30,    31}, /* IdSel 14 slot 4 PCI2*/
+		{    24,    24,    25,    26,    27}, /* IdSel 15 slot 5 PCI2*/
+#else
+		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 9 unused */
+		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 10 unused */
+#endif
+		{    40,    40,    41,    42,    43}, /* IdSel 11 slot 1 PCI0*/
+		{    36,    36,    37,    38,    39}, /* IdSel 12 slot 2 PCI0*/
+		{    32,    32,    33,    34,    35}, /* IdSel 13 slot 3 PCI0*/
+		{    28,    28,    29,    30,    31}, /* IdSel 14 slot 4 PCI2*/
+		{    24,    24,    25,    26,    27}  /* IdSel 15 slot 5 PCI2*/
+	};
+	const long min_idsel = 3, max_idsel = 15, irqs_per_slot = 5;
+	return COMMON_TABLE_LOOKUP;
+}
+
+static u8 __init
+monet_swizzle(struct pci_dev *dev, u8 *pinp)
+{
+	struct pci_controller *hose = dev->sysdata;
+	int slot, pin = *pinp;
+
+	if (!dev->bus->parent) {
+		slot = PCI_SLOT(dev->devfn);
+	}
+	/* Check for the built-in bridge on hose 1. */
+	else if (hose->index == 1 && PCI_SLOT(dev->bus->self->devfn) == 8) {
+		slot = PCI_SLOT(dev->devfn);
+	} else {
+		/* Must be a card-based bridge.  */
+		do {
+			/* Check for built-in bridge on hose 1. */
+			if (hose->index == 1 &&
+			    PCI_SLOT(dev->bus->self->devfn) == 8) {
+				slot = PCI_SLOT(dev->devfn);
+				break;
+			}
+			pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)) ;
+
+			/* Move up the chain of bridges.  */
+			dev = dev->bus->self;
+			/* Slot of the next bridge.  */
+			slot = PCI_SLOT(dev->devfn);
+		} while (dev->bus->self);
+	}
+	*pinp = pin;
+	return slot;
+}
+
+static int __init
+webbrick_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static char irq_tab[13][5] __initdata = {
+		/*INT    INTA   INTB   INTC   INTD */
+		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 7 ISA Bridge */
+		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 8 unused */
+		{    29,    29,    29,    29,    29}, /* IdSel 9 21143 #1 */
+		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 10 unused */
+		{    30,    30,    30,    30,    30}, /* IdSel 11 21143 #2 */
+		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 12 unused */
+		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 13 unused */
+		{    35,    35,    34,    33,    32}, /* IdSel 14 slot 0 */
+		{    39,    39,    38,    37,    36}, /* IdSel 15 slot 1 */
+		{    43,    43,    42,    41,    40}, /* IdSel 16 slot 2 */
+		{    47,    47,    46,    45,    44}, /* IdSel 17 slot 3 */
+	};
+	const long min_idsel = 7, max_idsel = 17, irqs_per_slot = 5;
+	return COMMON_TABLE_LOOKUP;
+}
+
+static int __init
+clipper_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static char irq_tab[7][5] __initdata = {
+		/*INT    INTA   INTB   INTC   INTD */
+		{ 16+ 8, 16+ 8, 16+ 9, 16+10, 16+11}, /* IdSel 1 slot 1 */
+		{ 16+12, 16+12, 16+13, 16+14, 16+15}, /* IdSel 2 slot 2 */
+		{ 16+16, 16+16, 16+17, 16+18, 16+19}, /* IdSel 3 slot 3 */
+		{ 16+20, 16+20, 16+21, 16+22, 16+23}, /* IdSel 4 slot 4 */
+		{ 16+24, 16+24, 16+25, 16+26, 16+27}, /* IdSel 5 slot 5 */
+		{ 16+28, 16+28, 16+29, 16+30, 16+31}, /* IdSel 6 slot 6 */
+		{    -1,    -1,    -1,    -1,    -1}  /* IdSel 7 ISA Bridge */
+	};
+	const long min_idsel = 1, max_idsel = 7, irqs_per_slot = 5;
+
+	struct pci_controller *hose = dev->sysdata;
+	int irq = COMMON_TABLE_LOOKUP;
+
+	if (irq > 0)
+		irq += 16 * hose->index;
+
+	return irq;
+}
+
+static void __init
+dp264_init_pci(void)
+{
+	common_init_pci();
+	SMC669_Init(0);
+}
+
+static void __init
+monet_init_pci(void)
+{
+	common_init_pci();
+	SMC669_Init(1);
+	es1888_init();
+}
+
+static void __init
+webbrick_init_arch(void)
+{
+	tsunami_init_arch();
+
+	/* Tsunami caches 4 PTEs at a time; DS10 has only 1 hose. */
+	hose_head->sg_isa->align_entry = 4;
+	hose_head->sg_pci->align_entry = 4;
+}
+
+
+/*
+ * The System Vectors
+ */
+
+struct alpha_machine_vector dp264_mv __initmv = {
+	.vector_name		= "DP264",
+	DO_EV6_MMU,
+	DO_DEFAULT_RTC,
+	DO_TSUNAMI_IO,
+	.machine_check		= tsunami_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= DEFAULT_MEM_BASE,
+	.pci_dac_offset		= TSUNAMI_DAC_OFFSET,
+
+	.nr_irqs		= 64,
+	.device_interrupt	= dp264_device_interrupt,
+
+	.init_arch		= tsunami_init_arch,
+	.init_irq		= dp264_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= dp264_init_pci,
+	.kill_arch		= tsunami_kill_arch,
+	.pci_map_irq		= dp264_map_irq,
+	.pci_swizzle		= common_swizzle,
+};
+ALIAS_MV(dp264)
+
+struct alpha_machine_vector monet_mv __initmv = {
+	.vector_name		= "Monet",
+	DO_EV6_MMU,
+	DO_DEFAULT_RTC,
+	DO_TSUNAMI_IO,
+	.machine_check		= tsunami_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= DEFAULT_MEM_BASE,
+	.pci_dac_offset		= TSUNAMI_DAC_OFFSET,
+
+	.nr_irqs		= 64,
+	.device_interrupt	= dp264_device_interrupt,
+
+	.init_arch		= tsunami_init_arch,
+	.init_irq		= dp264_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= monet_init_pci,
+	.kill_arch		= tsunami_kill_arch,
+	.pci_map_irq		= monet_map_irq,
+	.pci_swizzle		= monet_swizzle,
+};
+
+struct alpha_machine_vector webbrick_mv __initmv = {
+	.vector_name		= "Webbrick",
+	DO_EV6_MMU,
+	DO_DEFAULT_RTC,
+	DO_TSUNAMI_IO,
+	.machine_check		= tsunami_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= DEFAULT_MEM_BASE,
+	.pci_dac_offset		= TSUNAMI_DAC_OFFSET,
+
+	.nr_irqs		= 64,
+	.device_interrupt	= dp264_device_interrupt,
+
+	.init_arch		= webbrick_init_arch,
+	.init_irq		= dp264_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= common_init_pci,
+	.kill_arch		= tsunami_kill_arch,
+	.pci_map_irq		= webbrick_map_irq,
+	.pci_swizzle		= common_swizzle,
+};
+
+struct alpha_machine_vector clipper_mv __initmv = {
+	.vector_name		= "Clipper",
+	DO_EV6_MMU,
+	DO_DEFAULT_RTC,
+	DO_TSUNAMI_IO,
+	.machine_check		= tsunami_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= DEFAULT_MEM_BASE,
+	.pci_dac_offset		= TSUNAMI_DAC_OFFSET,
+
+	.nr_irqs		= 64,
+	.device_interrupt	= dp264_device_interrupt,
+
+	.init_arch		= tsunami_init_arch,
+	.init_irq		= clipper_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= common_init_pci,
+	.kill_arch		= tsunami_kill_arch,
+	.pci_map_irq		= clipper_map_irq,
+	.pci_swizzle		= common_swizzle,
+};
+
+/* Sharks strongly resemble Clipper, at least as far
+ * as interrupt routing, etc, so we're using the
+ * same functions as Clipper does
+ */
+
+struct alpha_machine_vector shark_mv __initmv = {
+	.vector_name		= "Shark",
+	DO_EV6_MMU,
+	DO_DEFAULT_RTC,
+	DO_TSUNAMI_IO,
+	.machine_check		= tsunami_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= DEFAULT_MEM_BASE,
+	.pci_dac_offset		= TSUNAMI_DAC_OFFSET,
+
+	.nr_irqs		= 64,
+	.device_interrupt	= dp264_device_interrupt,
+
+	.init_arch		= tsunami_init_arch,
+	.init_irq		= clipper_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= common_init_pci,
+	.kill_arch		= tsunami_kill_arch,
+	.pci_map_irq		= clipper_map_irq,
+	.pci_swizzle		= common_swizzle,
+};
+
+/* No alpha_mv alias for webbrick/monet/clipper, since we compile them
+   in unconditionally with DP264; setup_arch knows how to cope.  */