Merge branch 'be2net-error-recovery-and-bug-fixes'

Sriharsha Basavapatna says:

====================
be2net: patch-set

The following patch set contains an error recovery feature and a few
bug fixes. Please consider applying this to the net-next tree. Thanks.

Patch-1 Supports HW error recovery in Skyhawk/BEx adapters
Patch-2 Fixes driver unload to issue function reset FW command
Patch-3 Avoids issuing GET_EXT_FAT_CAPABILITIES command for VFs
Patch-4 Avoids redundant addition of mac address in HW
Patch-5 Fixes mac address collision in some configurations
Patch-6 Updates driver version
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

6 files changed, 517 insertions, 61 deletions

diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index 86780b5c40ef..6cfa63a5e9b4 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -37,7 +37,7 @@
 #include "be_hw.h"
 #include "be_roce.h"
 
-#define DRV_VER			"11.0.0.0"
+#define DRV_VER			"11.1.0.0"
 #define DRV_NAME		"be2net"
 #define BE_NAME			"Emulex BladeEngine2"
 #define BE3_NAME		"Emulex BladeEngine3"
@@ -399,13 +399,13 @@ enum vf_state {
 #define BE_FLAGS_PHY_MISCONFIGURED		BIT(10)
 #define BE_FLAGS_ERR_DETECTION_SCHEDULED	BIT(11)
 #define BE_FLAGS_OS2BMC				BIT(12)
+#define BE_FLAGS_TRY_RECOVERY			BIT(13)
 
 #define BE_UC_PMAC_COUNT			30
 #define BE_VF_UC_PMAC_COUNT			2
 
 #define MAX_ERR_RECOVERY_RETRY_COUNT		3
 #define ERR_DETECTION_DELAY			1000
-#define ERR_RECOVERY_RETRY_DELAY		30000
 
 /* Ethtool set_dump flags */
 #define LANCER_INITIATE_FW_DUMP			0x1
@@ -512,6 +512,66 @@ struct be_eth_addr {
 	unsigned char mac[ETH_ALEN];
 };
 
+#define BE_SEC	1000			/* in msec */
+#define BE_MIN	(60 * BE_SEC)		/* in msec */
+#define BE_HOUR	(60 * BE_MIN)		/* in msec */
+
+#define ERR_RECOVERY_MAX_RETRY_COUNT		3
+#define ERR_RECOVERY_DETECTION_DELAY		BE_SEC
+#define ERR_RECOVERY_RETRY_DELAY		(30 * BE_SEC)
+
+/* UE-detection-duration in BEx/Skyhawk:
+ * All PFs must wait for this duration after they detect UE before reading
+ * SLIPORT_SEMAPHORE register. At the end of this duration, the Firmware
+ * guarantees that the SLIPORT_SEMAPHORE register is updated to indicate
+ * if the UE is recoverable.
+ */
+#define ERR_RECOVERY_UE_DETECT_DURATION			BE_SEC
+
+/* Initial idle time (in msec) to elapse after driver load,
+ * before UE recovery is allowed.
+ */
+#define ERR_IDLE_HR			24
+#define ERR_RECOVERY_IDLE_TIME		(ERR_IDLE_HR * BE_HOUR)
+
+/* Time interval (in msec) after which UE recovery can be repeated */
+#define ERR_INTERVAL_HR			72
+#define ERR_RECOVERY_INTERVAL		(ERR_INTERVAL_HR * BE_HOUR)
+
+/* BEx/SH UE recovery state machine */
+enum {
+	ERR_RECOVERY_ST_NONE = 0,		/* No Recovery */
+	ERR_RECOVERY_ST_DETECT = 1,		/* UE detection duration */
+	ERR_RECOVERY_ST_RESET = 2,		/* Reset Phase (PF0 only) */
+	ERR_RECOVERY_ST_PRE_POLL = 3,		/* Pre-Poll Phase (all PFs) */
+	ERR_RECOVERY_ST_REINIT = 4		/* Re-initialize Phase */
+};
+
+struct be_error_recovery {
+	/* Lancer error recovery variables */
+	u8 recovery_retries;
+
+	/* BEx/Skyhawk error recovery variables */
+	u8 recovery_state;
+	u16 ue_to_reset_time;		/* Time after UE, to soft reset
+					 * the chip - PF0 only
+					 */
+	u16 ue_to_poll_time;		/* Time after UE, to Restart Polling
+					 * of SLIPORT_SEMAPHORE reg
+					 */
+	u16 last_err_code;
+	bool recovery_supported;
+	unsigned long probe_time;
+	unsigned long last_recovery_time;
+
+	/* Common to both Lancer & BEx/SH error recovery */
+	u32 resched_delay;
+	struct delayed_work err_detection_work;
+};
+
+/* Ethtool priv_flags */
+#define	BE_DISABLE_TPE_RECOVERY	0x1
+
 struct be_adapter {
 	struct pci_dev *pdev;
 	struct net_device *netdev;
@@ -560,7 +620,6 @@ struct be_adapter {
 	struct delayed_work work;
 	u16 work_counter;
 
-	struct delayed_work be_err_detection_work;
 	u8 recovery_retries;
 	u8 err_flags;
 	bool pcicfg_mapped;	/* pcicfg obtained via pci_iomap() */
@@ -634,6 +693,9 @@ struct be_adapter {
 	u32 fat_dump_len;
 	u16 serial_num[CNTL_SERIAL_NUM_WORDS];
 	u8 phy_state; /* state of sfp optics (functional, faulted, etc.,) */
+	u8 dev_mac[ETH_ALEN];
+	u32 priv_flags; /* ethtool get/set_priv_flags() */
+	struct be_error_recovery error_recovery;
 };
 
 /* Used for defered FW config cmds. Add fields to this struct as reqd */
@@ -867,6 +929,9 @@ static inline bool is_ipv4_pkt(struct sk_buff *skb)
 	return skb->protocol == htons(ETH_P_IP) && ip_hdr(skb)->version == 4;
 }
 
+#define be_error_recovering(adapter)	\
+		(adapter->flags & BE_FLAGS_TRY_RECOVERY)
+
 #define BE_ERROR_EEH		1
 #define BE_ERROR_UE		BIT(1)
 #define BE_ERROR_FW		BIT(2)
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index fa11a5a8c354..15d02da08d8f 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -92,6 +92,11 @@ static struct be_cmd_priv_map cmd_priv_map[] = {
 		CMD_SUBSYSTEM_COMMON,
 		BE_PRIV_DEVCFG | BE_PRIV_VHADM
 	},
+	{
+		OPCODE_COMMON_GET_EXT_FAT_CAPABILITIES,
+		CMD_SUBSYSTEM_COMMON,
+		BE_PRIV_DEVCFG
+	}
 };
 
 static bool be_cmd_allowed(struct be_adapter *adapter, u8 opcode, u8 subsystem)
@@ -705,7 +710,7 @@ static int be_mbox_notify_wait(struct be_adapter *adapter)
 	return 0;
 }
 
-static u16 be_POST_stage_get(struct be_adapter *adapter)
+u16 be_POST_stage_get(struct be_adapter *adapter)
 {
 	u32 sem;
 
@@ -4127,6 +4132,10 @@ int be_cmd_get_ext_fat_capabilites(struct be_adapter *adapter,
 	struct be_cmd_req_get_ext_fat_caps *req;
 	int status;
 
+	if (!be_cmd_allowed(adapter, OPCODE_COMMON_GET_EXT_FAT_CAPABILITIES,
+			    CMD_SUBSYSTEM_COMMON))
+		return -EPERM;
+
 	if (mutex_lock_interruptible(&adapter->mbox_lock))
 		return -1;
 
@@ -4138,7 +4147,7 @@ int be_cmd_get_ext_fat_capabilites(struct be_adapter *adapter,
 
 	req = cmd->va;
 	be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
-			       OPCODE_COMMON_GET_EXT_FAT_CAPABILITES,
+			       OPCODE_COMMON_GET_EXT_FAT_CAPABILITIES,
 			       cmd->size, wrb, cmd);
 	req->parameter_type = cpu_to_le32(1);
 
@@ -4167,7 +4176,7 @@ int be_cmd_set_ext_fat_capabilites(struct be_adapter *adapter,
 	req = cmd->va;
 	memcpy(&req->set_params, configs, sizeof(struct be_fat_conf_params));
 	be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
-			       OPCODE_COMMON_SET_EXT_FAT_CAPABILITES,
+			       OPCODE_COMMON_SET_EXT_FAT_CAPABILITIES,
 			       cmd->size, wrb, cmd);
 
 	status = be_mcc_notify_wait(adapter);
@@ -4954,6 +4963,57 @@ int be_cmd_set_logical_link_config(struct be_adapter *adapter,
 							  1, domain);
 	return status;
 }
+
+int be_cmd_set_features(struct be_adapter *adapter)
+{
+	struct be_cmd_resp_set_features *resp;
+	struct be_cmd_req_set_features *req;
+	struct be_mcc_wrb *wrb;
+	int status;
+
+	if (mutex_lock_interruptible(&adapter->mcc_lock))
+		return -1;
+
+	wrb = wrb_from_mccq(adapter);
+	if (!wrb) {
+		status = -EBUSY;
+		goto err;
+	}
+
+	req = embedded_payload(wrb);
+
+	be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+			       OPCODE_COMMON_SET_FEATURES,
+			       sizeof(*req), wrb, NULL);
+
+	req->features = cpu_to_le32(BE_FEATURE_UE_RECOVERY);
+	req->parameter_len = cpu_to_le32(sizeof(struct be_req_ue_recovery));
+	req->parameter.req.uer = cpu_to_le32(BE_UE_RECOVERY_UER_MASK);
+
+	status = be_mcc_notify_wait(adapter);
+	if (status)
+		goto err;
+
+	resp = embedded_payload(wrb);
+
+	adapter->error_recovery.ue_to_poll_time =
+		le16_to_cpu(resp->parameter.resp.ue2rp);
+	adapter->error_recovery.ue_to_reset_time =
+		le16_to_cpu(resp->parameter.resp.ue2sr);
+	adapter->error_recovery.recovery_supported = true;
+err:
+	/* Checking "MCC_STATUS_INVALID_LENGTH" for SKH as FW
+	 * returns this error in older firmware versions
+	 */
+	if (base_status(status) == MCC_STATUS_ILLEGAL_REQUEST ||
+	    base_status(status) == MCC_STATUS_INVALID_LENGTH)
+		dev_info(&adapter->pdev->dev,
+			 "Adapter does not support HW error recovery\n");
+
+	mutex_unlock(&adapter->mcc_lock);
+	return status;
+}
+
 int be_roce_mcc_cmd(void *netdev_handle, void *wrb_payload,
 		    int wrb_payload_size, u16 *cmd_status, u16 *ext_status)
 {
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h
index 0d6be224a787..1bd82bcb3be5 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.h
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.h
@@ -58,7 +58,8 @@ enum mcc_base_status {
 	MCC_STATUS_INSUFFICIENT_BUFFER = 4,
 	MCC_STATUS_UNAUTHORIZED_REQUEST = 5,
 	MCC_STATUS_NOT_SUPPORTED = 66,
-	MCC_STATUS_FEATURE_NOT_SUPPORTED = 68
+	MCC_STATUS_FEATURE_NOT_SUPPORTED = 68,
+	MCC_STATUS_INVALID_LENGTH = 116
 };
 
 /* Additional status */
@@ -294,8 +295,8 @@ struct be_mcc_mailbox {
 #define OPCODE_COMMON_GET_PHY_DETAILS			102
 #define OPCODE_COMMON_SET_DRIVER_FUNCTION_CAP		103
 #define OPCODE_COMMON_GET_CNTL_ADDITIONAL_ATTRIBUTES	121
-#define OPCODE_COMMON_GET_EXT_FAT_CAPABILITES		125
-#define OPCODE_COMMON_SET_EXT_FAT_CAPABILITES		126
+#define OPCODE_COMMON_GET_EXT_FAT_CAPABILITIES		125
+#define OPCODE_COMMON_SET_EXT_FAT_CAPABILITIES		126
 #define OPCODE_COMMON_GET_MAC_LIST			147
 #define OPCODE_COMMON_SET_MAC_LIST			148
 #define OPCODE_COMMON_GET_HSW_CONFIG			152
@@ -308,6 +309,7 @@ struct be_mcc_mailbox {
 #define OPCODE_COMMON_READ_OBJECT			171
 #define OPCODE_COMMON_WRITE_OBJECT			172
 #define OPCODE_COMMON_DELETE_OBJECT			174
+#define OPCODE_COMMON_SET_FEATURES			191
 #define OPCODE_COMMON_MANAGE_IFACE_FILTERS		193
 #define OPCODE_COMMON_GET_IFACE_LIST			194
 #define OPCODE_COMMON_ENABLE_DISABLE_VF			196
@@ -2315,6 +2317,41 @@ struct be_cmd_resp_get_iface_list {
 	struct be_if_desc if_desc;
 };
 
+/************** Set Features *******************/
+#define	BE_FEATURE_UE_RECOVERY		0x10
+#define	BE_UE_RECOVERY_UER_MASK		0x1
+
+struct be_req_ue_recovery {
+	u32	uer;
+	u32	rsvd;
+};
+
+struct be_cmd_req_set_features {
+	struct be_cmd_req_hdr hdr;
+	u32 features;
+	u32 parameter_len;
+	union {
+		struct be_req_ue_recovery req;
+		u32 rsvd[2];
+	} parameter;
+};
+
+struct be_resp_ue_recovery {
+	u32 uer;
+	u16 ue2rp;
+	u16 ue2sr;
+};
+
+struct be_cmd_resp_set_features {
+	struct be_cmd_resp_hdr hdr;
+	u32 features;
+	u32 parameter_len;
+	union {
+		struct be_resp_ue_recovery resp;
+		u32 rsvd[2];
+	} parameter;
+};
+
 /*************** Set logical link ********************/
 #define PLINK_ENABLE            BIT(0)
 #define PLINK_TRACK             BIT(8)
@@ -2343,6 +2380,7 @@ struct be_cmd_req_manage_iface_filters {
 	u32 cap_control_flags;
 } __packed;
 
+u16 be_POST_stage_get(struct be_adapter *adapter);
 int be_pci_fnum_get(struct be_adapter *adapter);
 int be_fw_wait_ready(struct be_adapter *adapter);
 int be_cmd_mac_addr_query(struct be_adapter *adapter, u8 *mac_addr,
@@ -2470,3 +2508,4 @@ int be_cmd_manage_iface(struct be_adapter *adapter, u32 iface, u8 op);
 int be_cmd_set_sriov_config(struct be_adapter *adapter,
 			    struct be_resources res, u16 num_vfs,
 			    struct be_resources *vft_res);
+int be_cmd_set_features(struct be_adapter *adapter);
diff --git a/drivers/net/ethernet/emulex/benet/be_ethtool.c b/drivers/net/ethernet/emulex/benet/be_ethtool.c
index 50e7be5da50c..0a48a31225e6 100644
--- a/drivers/net/ethernet/emulex/benet/be_ethtool.c
+++ b/drivers/net/ethernet/emulex/benet/be_ethtool.c
@@ -421,6 +421,10 @@ static void be_get_ethtool_stats(struct net_device *netdev,
 	}
 }
 
+static const char be_priv_flags[][ETH_GSTRING_LEN] = {
+	"disable-tpe-recovery"
+};
+
 static void be_get_stat_strings(struct net_device *netdev, uint32_t stringset,
 				uint8_t *data)
 {
@@ -454,6 +458,10 @@ static void be_get_stat_strings(struct net_device *netdev, uint32_t stringset,
 			data += ETH_GSTRING_LEN;
 		}
 		break;
+	case ETH_SS_PRIV_FLAGS:
+		for (i = 0; i < ARRAY_SIZE(be_priv_flags); i++)
+			strcpy(data + i * ETH_GSTRING_LEN, be_priv_flags[i]);
+		break;
 	}
 }
 
@@ -468,6 +476,8 @@ static int be_get_sset_count(struct net_device *netdev, int stringset)
 		return ETHTOOL_STATS_NUM +
 			adapter->num_rx_qs * ETHTOOL_RXSTATS_NUM +
 			adapter->num_tx_qs * ETHTOOL_TXSTATS_NUM;
+	case ETH_SS_PRIV_FLAGS:
+		return ARRAY_SIZE(be_priv_flags);
 	default:
 		return -EINVAL;
 	}
@@ -1360,6 +1370,34 @@ err:
 	return be_cmd_status(status);
 }
 
+static u32 be_get_priv_flags(struct net_device *netdev)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+
+	return adapter->priv_flags;
+}
+
+static int be_set_priv_flags(struct net_device *netdev, u32 flags)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+	bool tpe_old = !!(adapter->priv_flags & BE_DISABLE_TPE_RECOVERY);
+	bool tpe_new = !!(flags & BE_DISABLE_TPE_RECOVERY);
+
+	if (tpe_old != tpe_new) {
+		if (tpe_new) {
+			adapter->priv_flags |= BE_DISABLE_TPE_RECOVERY;
+			dev_info(&adapter->pdev->dev,
+				 "HW error recovery is disabled\n");
+		} else {
+			adapter->priv_flags &= ~BE_DISABLE_TPE_RECOVERY;
+			dev_info(&adapter->pdev->dev,
+				 "HW error recovery is enabled\n");
+		}
+	}
+
+	return 0;
+}
+
 const struct ethtool_ops be_ethtool_ops = {
 	.get_settings = be_get_settings,
 	.get_drvinfo = be_get_drvinfo,
@@ -1373,6 +1411,8 @@ const struct ethtool_ops be_ethtool_ops = {
 	.get_ringparam = be_get_ringparam,
 	.get_pauseparam = be_get_pauseparam,
 	.set_pauseparam = be_set_pauseparam,
+	.set_priv_flags = be_set_priv_flags,
+	.get_priv_flags = be_get_priv_flags,
 	.get_strings = be_get_stat_strings,
 	.set_phys_id = be_set_phys_id,
 	.set_dump = be_set_dump,
diff --git a/drivers/net/ethernet/emulex/benet/be_hw.h b/drivers/net/ethernet/emulex/benet/be_hw.h
index c684bb32b487..92942c84d329 100644
--- a/drivers/net/ethernet/emulex/benet/be_hw.h
+++ b/drivers/net/ethernet/emulex/benet/be_hw.h
@@ -32,18 +32,23 @@
 #define MPU_EP_CONTROL 		0
 
 /********** MPU semphore: used for SH & BE  *************/
+#define SLIPORT_SOFTRESET_OFFSET		0x5c	/* CSR BAR offset */
 #define SLIPORT_SEMAPHORE_OFFSET_BEx		0xac  /* CSR BAR offset */
 #define SLIPORT_SEMAPHORE_OFFSET_SH		0x94  /* PCI-CFG offset */
 #define POST_STAGE_MASK				0x0000FFFF
 #define POST_ERR_MASK				0x1
 #define POST_ERR_SHIFT				31
+#define POST_ERR_RECOVERY_CODE_MASK		0xFFF
+
+/* Soft Reset register masks */
+#define SLIPORT_SOFTRESET_SR_MASK		0x00000080	/* SR bit */
 
 /* MPU semphore POST stage values */
 #define POST_STAGE_AWAITING_HOST_RDY 	0x1 /* FW awaiting goahead from host */
 #define POST_STAGE_HOST_RDY 		0x2 /* Host has given go-ahed to FW */
 #define POST_STAGE_BE_RESET		0x3 /* Host wants to reset chip */
 #define POST_STAGE_ARMFW_RDY		0xc000	/* FW is done with POST */
-
+#define POST_STAGE_RECOVERABLE_ERR	0xE000	/* Recoverable err detected */
 
 /* Lancer SLIPORT registers */
 #define SLIPORT_STATUS_OFFSET		0x404
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index f7584d4139ff..34f63eff6e8a 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -41,6 +41,11 @@ static ushort rx_frag_size = 2048;
 module_param(rx_frag_size, ushort, S_IRUGO);
 MODULE_PARM_DESC(rx_frag_size, "Size of a fragment that holds rcvd data.");
 
+/* Per-module error detection/recovery workq shared across all functions.
+ * Each function schedules its own work request on this shared workq.
+ */
+struct workqueue_struct *be_err_recovery_workq;
+
 static const struct pci_device_id be_dev_ids[] = {
 	{ PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID1) },
 	{ PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID2) },
@@ -264,6 +269,38 @@ void be_cq_notify(struct be_adapter *adapter, u16 qid, bool arm, u16 num_popped)
 	iowrite32(val, adapter->db + DB_CQ_OFFSET);
 }
 
+static int be_dev_mac_add(struct be_adapter *adapter, u8 *mac)
+{
+	int i;
+
+	/* Check if mac has already been added as part of uc-list */
+	for (i = 0; i < adapter->uc_macs; i++) {
+		if (ether_addr_equal((u8 *)&adapter->uc_list[i * ETH_ALEN],
+				     mac)) {
+			/* mac already added, skip addition */
+			adapter->pmac_id[0] = adapter->pmac_id[i + 1];
+			return 0;
+		}
+	}
+
+	return be_cmd_pmac_add(adapter, mac, adapter->if_handle,
+			       &adapter->pmac_id[0], 0);
+}
+
+static void be_dev_mac_del(struct be_adapter *adapter, int pmac_id)
+{
+	int i;
+
+	/* Skip deletion if the programmed mac is
+	 * being used in uc-list
+	 */
+	for (i = 0; i < adapter->uc_macs; i++) {
+		if (adapter->pmac_id[i + 1] == pmac_id)
+			return;
+	}
+	be_cmd_pmac_del(adapter, adapter->if_handle, pmac_id, 0);
+}
+
 static int be_mac_addr_set(struct net_device *netdev, void *p)
 {
 	struct be_adapter *adapter = netdev_priv(netdev);
@@ -271,7 +308,7 @@ static int be_mac_addr_set(struct net_device *netdev, void *p)
 	struct sockaddr *addr = p;
 	int status;
 	u8 mac[ETH_ALEN];
-	u32 old_pmac_id = adapter->pmac_id[0], curr_pmac_id = 0;
+	u32 old_pmac_id = adapter->pmac_id[0];
 
 	if (!is_valid_ether_addr(addr->sa_data))
 		return -EADDRNOTAVAIL;
@@ -279,7 +316,7 @@ static int be_mac_addr_set(struct net_device *netdev, void *p)
 	/* Proceed further only if, User provided MAC is different
 	 * from active MAC
 	 */
-	if (ether_addr_equal(addr->sa_data, netdev->dev_addr))
+	if (ether_addr_equal(addr->sa_data, adapter->dev_mac))
 		return 0;
 
 	/* if device is not running, copy MAC to netdev->dev_addr */
@@ -292,23 +329,22 @@ static int be_mac_addr_set(struct net_device *netdev, void *p)
 	 * FILTMGMT privilege. This failure is OK, only if the PF programmed
 	 * the MAC for the VF.
 	 */
-	status = be_cmd_pmac_add(adapter, (u8 *)addr->sa_data,
-				 adapter->if_handle, &adapter->pmac_id[0], 0);
+	mutex_lock(&adapter->rx_filter_lock);
+	status = be_dev_mac_add(adapter, (u8 *)addr->sa_data);
 	if (!status) {
-		curr_pmac_id = adapter->pmac_id[0];
 
 		/* Delete the old programmed MAC. This call may fail if the
 		 * old MAC was already deleted by the PF driver.
 		 */
 		if (adapter->pmac_id[0] != old_pmac_id)
-			be_cmd_pmac_del(adapter, adapter->if_handle,
-					old_pmac_id, 0);
+			be_dev_mac_del(adapter, old_pmac_id);
 	}
 
+	mutex_unlock(&adapter->rx_filter_lock);
 	/* Decide if the new MAC is successfully activated only after
 	 * querying the FW
 	 */
-	status = be_cmd_get_active_mac(adapter, curr_pmac_id, mac,
+	status = be_cmd_get_active_mac(adapter, adapter->pmac_id[0], mac,
 				       adapter->if_handle, true, 0);
 	if (status)
 		goto err;
@@ -321,6 +357,7 @@ static int be_mac_addr_set(struct net_device *netdev, void *p)
 		goto err;
 	}
 done:
+	ether_addr_copy(adapter->dev_mac, addr->sa_data);
 	ether_addr_copy(netdev->dev_addr, addr->sa_data);
 	dev_info(dev, "MAC address changed to %pM\n", addr->sa_data);
 	return 0;
@@ -1623,6 +1660,28 @@ static void be_clear_mc_list(struct be_adapter *adapter)
 	adapter->mc_count = 0;
 }
 
+static int be_uc_mac_add(struct be_adapter *adapter, int uc_idx)
+{
+	if (ether_addr_equal((u8 *)&adapter->uc_list[uc_idx * ETH_ALEN],
+			     adapter->dev_mac)) {
+		adapter->pmac_id[uc_idx + 1] = adapter->pmac_id[0];
+		return 0;
+	}
+
+	return be_cmd_pmac_add(adapter,
+			       (u8 *)&adapter->uc_list[uc_idx * ETH_ALEN],
+			       adapter->if_handle,
+			       &adapter->pmac_id[uc_idx + 1], 0);
+}
+
+static void be_uc_mac_del(struct be_adapter *adapter, int pmac_id)
+{
+	if (pmac_id == adapter->pmac_id[0])
+		return;
+
+	be_cmd_pmac_del(adapter, adapter->if_handle, pmac_id, 0);
+}
+
 static void be_set_uc_list(struct be_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
@@ -1663,13 +1722,10 @@ static void be_set_uc_list(struct be_adapter *adapter)
 		be_clear_uc_promisc(adapter);
 
 		for (i = 0; i < adapter->uc_macs; i++)
-			be_cmd_pmac_del(adapter, adapter->if_handle,
-					adapter->pmac_id[i + 1], 0);
+			be_uc_mac_del(adapter, adapter->pmac_id[i + 1]);
 
 		for (i = 0; i < curr_uc_macs; i++)
-			be_cmd_pmac_add(adapter, adapter->uc_list[i].mac,
-					adapter->if_handle,
-					&adapter->pmac_id[i + 1], 0);
+			be_uc_mac_add(adapter, i);
 		adapter->uc_macs = curr_uc_macs;
 		adapter->update_uc_list = false;
 	}
@@ -1682,8 +1738,8 @@ static void be_clear_uc_list(struct be_adapter *adapter)
 
 	__dev_uc_unsync(netdev, NULL);
 	for (i = 0; i < adapter->uc_macs; i++)
-		be_cmd_pmac_del(adapter, adapter->if_handle,
-				adapter->pmac_id[i + 1], 0);
+		be_uc_mac_del(adapter, adapter->pmac_id[i + 1]);
+
 	adapter->uc_macs = 0;
 }
 
@@ -3358,9 +3414,7 @@ void be_detect_error(struct be_adapter *adapter)
 		 */
 
 		if (ue_lo || ue_hi) {
-			dev_err(dev,
-				"Unrecoverable Error detected in the adapter");
-			dev_err(dev, "Please reboot server to recover");
+			dev_err(dev, "Error detected in the adapter");
 			if (skyhawk_chip(adapter))
 				be_set_error(adapter, BE_ERROR_UE);
 
@@ -3563,9 +3617,7 @@ static void be_rx_qs_destroy(struct be_adapter *adapter)
 
 static void be_disable_if_filters(struct be_adapter *adapter)
 {
-	be_cmd_pmac_del(adapter, adapter->if_handle,
-			adapter->pmac_id[0], 0);
-
+	be_dev_mac_del(adapter, adapter->pmac_id[0]);
 	be_clear_uc_list(adapter);
 	be_clear_mc_list(adapter);
 
@@ -3720,11 +3772,10 @@ static int be_enable_if_filters(struct be_adapter *adapter)
 
 	/* For BE3 VFs, the PF programs the initial MAC address */
 	if (!(BEx_chip(adapter) && be_virtfn(adapter))) {
-		status = be_cmd_pmac_add(adapter, adapter->netdev->dev_addr,
-					 adapter->if_handle,
-					 &adapter->pmac_id[0], 0);
+		status = be_dev_mac_add(adapter, adapter->netdev->dev_addr);
 		if (status)
 			return status;
+		ether_addr_copy(adapter->dev_mac, adapter->netdev->dev_addr);
 	}
 
 	if (adapter->vlans_added)
@@ -3903,8 +3954,13 @@ static void be_cancel_worker(struct be_adapter *adapter)
 
 static void be_cancel_err_detection(struct be_adapter *adapter)
 {
+	struct be_error_recovery *err_rec = &adapter->error_recovery;
+
+	if (!be_err_recovery_workq)
+		return;
+
 	if (adapter->flags & BE_FLAGS_ERR_DETECTION_SCHEDULED) {
-		cancel_delayed_work_sync(&adapter->be_err_detection_work);
+		cancel_delayed_work_sync(&err_rec->err_detection_work);
 		adapter->flags &= ~BE_FLAGS_ERR_DETECTION_SCHEDULED;
 	}
 }
@@ -4503,10 +4559,25 @@ static void be_schedule_worker(struct be_adapter *adapter)
 	adapter->flags |= BE_FLAGS_WORKER_SCHEDULED;
 }
 
+static void be_destroy_err_recovery_workq(void)
+{
+	if (!be_err_recovery_workq)
+		return;
+
+	flush_workqueue(be_err_recovery_workq);
+	destroy_workqueue(be_err_recovery_workq);
+	be_err_recovery_workq = NULL;
+}
+
 static void be_schedule_err_detection(struct be_adapter *adapter, u32 delay)
 {
-	schedule_delayed_work(&adapter->be_err_detection_work,
-			      msecs_to_jiffies(delay));
+	struct be_error_recovery *err_rec = &adapter->error_recovery;
+
+	if (!be_err_recovery_workq)
+		return;
+
+	queue_delayed_work(be_err_recovery_workq, &err_rec->err_detection_work,
+			   msecs_to_jiffies(delay));
 	adapter->flags |= BE_FLAGS_ERR_DETECTION_SCHEDULED;
 }
 
@@ -4635,10 +4706,15 @@ static inline int fw_major_num(const char *fw_ver)
 	return fw_major;
 }
 
-/* If any VFs are already enabled don't FLR the PF */
+/* If it is error recovery, FLR the PF
+ * Else if any VFs are already enabled don't FLR the PF
+ */
 static bool be_reset_required(struct be_adapter *adapter)
 {
-	return pci_num_vf(adapter->pdev) ? false : true;
+	if (be_error_recovering(adapter))
+		return true;
+	else
+		return pci_num_vf(adapter->pdev) == 0;
 }
 
 /* Wait for the FW to be ready and perform the required initialization */
@@ -4650,6 +4726,9 @@ static int be_func_init(struct be_adapter *adapter)
 	if (status)
 		return status;
 
+	/* FW is now ready; clear errors to allow cmds/doorbell */
+	be_clear_error(adapter, BE_CLEAR_ALL);
+
 	if (be_reset_required(adapter)) {
 		status = be_cmd_reset_function(adapter);
 		if (status)
@@ -4657,9 +4736,6 @@ static int be_func_init(struct be_adapter *adapter)
 
 		/* Wait for interrupts to quiesce after an FLR */
 		msleep(100);
-
-		/* We can clear all errors when function reset succeeds */
-		be_clear_error(adapter, BE_CLEAR_ALL);
 	}
 
 	/* Tell FW we're ready to fire cmds */
@@ -4767,6 +4843,9 @@ static int be_setup(struct be_adapter *adapter)
 	if (!status && be_pause_supported(adapter))
 		adapter->phy.fc_autoneg = 1;
 
+	if (be_physfn(adapter) && !lancer_chip(adapter))
+		be_cmd_set_features(adapter);
+
 	be_schedule_worker(adapter);
 	adapter->flags |= BE_FLAGS_SETUP_DONE;
 	return 0;
@@ -5210,13 +5289,145 @@ static int be_resume(struct be_adapter *adapter)
 	return 0;
 }
 
+static void be_soft_reset(struct be_adapter *adapter)
+{
+	u32 val;
+
+	dev_info(&adapter->pdev->dev, "Initiating chip soft reset\n");
+	val = ioread32(adapter->pcicfg + SLIPORT_SOFTRESET_OFFSET);
+	val |= SLIPORT_SOFTRESET_SR_MASK;
+	iowrite32(val, adapter->pcicfg + SLIPORT_SOFTRESET_OFFSET);
+}
+
+static bool be_err_is_recoverable(struct be_adapter *adapter)
+{
+	struct be_error_recovery *err_rec = &adapter->error_recovery;
+	unsigned long initial_idle_time =
+		msecs_to_jiffies(ERR_RECOVERY_IDLE_TIME);
+	unsigned long recovery_interval =
+		msecs_to_jiffies(ERR_RECOVERY_INTERVAL);
+	u16 ue_err_code;
+	u32 val;
+
+	val = be_POST_stage_get(adapter);
+	if ((val & POST_STAGE_RECOVERABLE_ERR) != POST_STAGE_RECOVERABLE_ERR)
+		return false;
+	ue_err_code = val & POST_ERR_RECOVERY_CODE_MASK;
+	if (ue_err_code == 0)
+		return false;
+
+	dev_err(&adapter->pdev->dev, "Recoverable HW error code: 0x%x\n",
+		ue_err_code);
+
+	if (jiffies - err_rec->probe_time <= initial_idle_time) {
+		dev_err(&adapter->pdev->dev,
+			"Cannot recover within %lu sec from driver load\n",
+			jiffies_to_msecs(initial_idle_time) / MSEC_PER_SEC);
+		return false;
+	}
+
+	if (err_rec->last_recovery_time &&
+	    (jiffies - err_rec->last_recovery_time <= recovery_interval)) {
+		dev_err(&adapter->pdev->dev,
+			"Cannot recover within %lu sec from last recovery\n",
+			jiffies_to_msecs(recovery_interval) / MSEC_PER_SEC);
+		return false;
+	}
+
+	if (ue_err_code == err_rec->last_err_code) {
+		dev_err(&adapter->pdev->dev,
+			"Cannot recover from a consecutive TPE error\n");
+		return false;
+	}
+
+	err_rec->last_recovery_time = jiffies;
+	err_rec->last_err_code = ue_err_code;
+	return true;
+}
+
+static int be_tpe_recover(struct be_adapter *adapter)
+{
+	struct be_error_recovery *err_rec = &adapter->error_recovery;
+	int status = -EAGAIN;
+	u32 val;
+
+	switch (err_rec->recovery_state) {
+	case ERR_RECOVERY_ST_NONE:
+		err_rec->recovery_state = ERR_RECOVERY_ST_DETECT;
+		err_rec->resched_delay = ERR_RECOVERY_UE_DETECT_DURATION;
+		break;
+
+	case ERR_RECOVERY_ST_DETECT:
+		val = be_POST_stage_get(adapter);
+		if ((val & POST_STAGE_RECOVERABLE_ERR) !=
+		    POST_STAGE_RECOVERABLE_ERR) {
+			dev_err(&adapter->pdev->dev,
+				"Unrecoverable HW error detected: 0x%x\n", val);
+			status = -EINVAL;
+			err_rec->resched_delay = 0;
+			break;
+		}
+
+		dev_err(&adapter->pdev->dev, "Recoverable HW error detected\n");
+
+		/* Only PF0 initiates Chip Soft Reset. But PF0 must wait UE2SR
+		 * milliseconds before it checks for final error status in
+		 * SLIPORT_SEMAPHORE to determine if recovery criteria is met.
+		 * If it does, then PF0 initiates a Soft Reset.
+		 */
+		if (adapter->pf_num == 0) {
+			err_rec->recovery_state = ERR_RECOVERY_ST_RESET;
+			err_rec->resched_delay = err_rec->ue_to_reset_time -
+					ERR_RECOVERY_UE_DETECT_DURATION;
+			break;
+		}
+
+		err_rec->recovery_state = ERR_RECOVERY_ST_PRE_POLL;
+		err_rec->resched_delay = err_rec->ue_to_poll_time -
+					ERR_RECOVERY_UE_DETECT_DURATION;
+		break;
+
+	case ERR_RECOVERY_ST_RESET:
+		if (!be_err_is_recoverable(adapter)) {
+			dev_err(&adapter->pdev->dev,
+				"Failed to meet recovery criteria\n");
+			status = -EIO;
+			err_rec->resched_delay = 0;
+			break;
+		}
+		be_soft_reset(adapter);
+		err_rec->recovery_state = ERR_RECOVERY_ST_PRE_POLL;
+		err_rec->resched_delay = err_rec->ue_to_poll_time -
+					err_rec->ue_to_reset_time;
+		break;
+
+	case ERR_RECOVERY_ST_PRE_POLL:
+		err_rec->recovery_state = ERR_RECOVERY_ST_REINIT;
+		err_rec->resched_delay = 0;
+		status = 0;			/* done */
+		break;
+
+	default:
+		status = -EINVAL;
+		err_rec->resched_delay = 0;
+		break;
+	}
+
+	return status;
+}
+
 static int be_err_recover(struct be_adapter *adapter)
 {
 	int status;
 
-	/* Error recovery is supported only Lancer as of now */
-	if (!lancer_chip(adapter))
-		return -EIO;
+	if (!lancer_chip(adapter)) {
+		if (!adapter->error_recovery.recovery_supported ||
+		    adapter->priv_flags & BE_DISABLE_TPE_RECOVERY)
+			return -EIO;
+		status = be_tpe_recover(adapter);
+		if (status)
+			goto err;
+	}
 
 	/* Wait for adapter to reach quiescent state before
 	 * destroying queues
@@ -5225,59 +5436,74 @@ static int be_err_recover(struct be_adapter *adapter)
 	if (status)
 		goto err;
 
+	adapter->flags |= BE_FLAGS_TRY_RECOVERY;
+
 	be_cleanup(adapter);
 
 	status = be_resume(adapter);
 	if (status)
 		goto err;
 
-	return 0;
+	adapter->flags &= ~BE_FLAGS_TRY_RECOVERY;
+
 err:
 	return status;
 }
 
 static void be_err_detection_task(struct work_struct *work)
 {
+	struct be_error_recovery *err_rec =
+			container_of(work, struct be_error_recovery,
+				     err_detection_work.work);
 	struct be_adapter *adapter =
-				container_of(work, struct be_adapter,
-					     be_err_detection_work.work);
+			container_of(err_rec, struct be_adapter,
+				     error_recovery);
+	u32 resched_delay = ERR_RECOVERY_DETECTION_DELAY;
 	struct device *dev = &adapter->pdev->dev;
 	int recovery_status;
-	int delay = ERR_DETECTION_DELAY;
 
 	be_detect_error(adapter);
-
-	if (be_check_error(adapter, BE_ERROR_HW))
-		recovery_status = be_err_recover(adapter);
-	else
+	if (!be_check_error(adapter, BE_ERROR_HW))
 		goto reschedule_task;
 
+	recovery_status = be_err_recover(adapter);
 	if (!recovery_status) {
-		adapter->recovery_retries = 0;
+		err_rec->recovery_retries = 0;
+		err_rec->recovery_state = ERR_RECOVERY_ST_NONE;
 		dev_info(dev, "Adapter recovery successful\n");
 		goto reschedule_task;
-	} else if (be_virtfn(adapter)) {
+	} else if (!lancer_chip(adapter) && err_rec->resched_delay) {
+		/* BEx/SH recovery state machine */
+		if (adapter->pf_num == 0 &&
+		    err_rec->recovery_state > ERR_RECOVERY_ST_DETECT)
+			dev_err(&adapter->pdev->dev,
+				"Adapter recovery in progress\n");
+		resched_delay = err_rec->resched_delay;
+		goto reschedule_task;
+	} else if (lancer_chip(adapter) && be_virtfn(adapter)) {
 		/* For VFs, check if PF have allocated resources
 		 * every second.
 		 */
 		dev_err(dev, "Re-trying adapter recovery\n");
 		goto reschedule_task;
-	} else if (adapter->recovery_retries++ <
-		   MAX_ERR_RECOVERY_RETRY_COUNT) {
+	} else if (lancer_chip(adapter) && err_rec->recovery_retries++ <
+		   ERR_RECOVERY_MAX_RETRY_COUNT) {
 		/* In case of another error during recovery, it takes 30 sec
 		 * for adapter to come out of error. Retry error recovery after
 		 * this time interval.
 		 */
 		dev_err(&adapter->pdev->dev, "Re-trying adapter recovery\n");
-		delay = ERR_RECOVERY_RETRY_DELAY;
+		resched_delay = ERR_RECOVERY_RETRY_DELAY;
 		goto reschedule_task;
 	} else {
 		dev_err(dev, "Adapter recovery failed\n");
+		dev_err(dev, "Please reboot server to recover\n");
 	}
 
 	return;
+
 reschedule_task:
-	be_schedule_err_detection(adapter, delay);
+	be_schedule_err_detection(adapter, resched_delay);
 }
 
 static void be_log_sfp_info(struct be_adapter *adapter)
@@ -5490,7 +5716,10 @@ static int be_drv_init(struct be_adapter *adapter)
 	pci_save_state(adapter->pdev);
 
 	INIT_DELAYED_WORK(&adapter->work, be_worker);
-	INIT_DELAYED_WORK(&adapter->be_err_detection_work,
+
+	adapter->error_recovery.recovery_state = ERR_RECOVERY_ST_NONE;
+	adapter->error_recovery.resched_delay = 0;
+	INIT_DELAYED_WORK(&adapter->error_recovery.err_detection_work,
 			  be_err_detection_task);
 
 	adapter->rx_fc = true;
@@ -5525,6 +5754,9 @@ static void be_remove(struct pci_dev *pdev)
 
 	be_clear(adapter);
 
+	if (!pci_vfs_assigned(adapter->pdev))
+		be_cmd_reset_function(adapter);
+
 	/* tell fw we're done with firing cmds */
 	be_cmd_fw_clean(adapter);
 
@@ -5681,6 +5913,7 @@ static int be_probe(struct pci_dev *pdev, const struct pci_device_id *pdev_id)
 	be_roce_dev_add(adapter);
 
 	be_schedule_err_detection(adapter, ERR_DETECTION_DELAY);
+	adapter->error_recovery.probe_time = jiffies;
 
 	/* On Die temperature not supported for VF. */
 	if (be_physfn(adapter) && IS_ENABLED(CONFIG_BE2NET_HWMON)) {
@@ -5926,6 +6159,8 @@ static struct pci_driver be_driver = {
 
 static int __init be_init_module(void)
 {
+	int status;
+
 	if (rx_frag_size != 8192 && rx_frag_size != 4096 &&
 	    rx_frag_size != 2048) {
 		printk(KERN_WARNING DRV_NAME
@@ -5945,7 +6180,17 @@ static int __init be_init_module(void)
 		return -1;
 	}
 
-	return pci_register_driver(&be_driver);
+	be_err_recovery_workq =
+		create_singlethread_workqueue("be_err_recover");
+	if (!be_err_recovery_workq)
+		pr_warn(DRV_NAME "Could not create error recovery workqueue\n");
+
+	status = pci_register_driver(&be_driver);
+	if (status) {
+		destroy_workqueue(be_wq);
+		be_destroy_err_recovery_workq();
+	}
+	return status;
 }
 module_init(be_init_module);
 
@@ -5953,6 +6198,8 @@ static void __exit be_exit_module(void)
 {
 	pci_unregister_driver(&be_driver);
 
+	be_destroy_err_recovery_workq();
+
 	if (be_wq)
 		destroy_workqueue(be_wq);
 }