1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
|
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Synopsys DesignWare I2C adapter driver.
*
* Based on the TI DAVINCI I2C adapter driver.
*
* Copyright (C) 2006 Texas Instruments.
* Copyright (C) 2007 MontaVista Software Inc.
* Copyright (C) 2009 Provigent Ltd.
*/
#include <linux/acpi.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/export.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/swab.h>
#include <linux/types.h>
#include <linux/units.h>
#define DEFAULT_SYMBOL_NAMESPACE I2C_DW_COMMON
#include "i2c-designware-core.h"
static char *abort_sources[] = {
[ABRT_7B_ADDR_NOACK] =
"slave address not acknowledged (7bit mode)",
[ABRT_10ADDR1_NOACK] =
"first address byte not acknowledged (10bit mode)",
[ABRT_10ADDR2_NOACK] =
"second address byte not acknowledged (10bit mode)",
[ABRT_TXDATA_NOACK] =
"data not acknowledged",
[ABRT_GCALL_NOACK] =
"no acknowledgement for a general call",
[ABRT_GCALL_READ] =
"read after general call",
[ABRT_SBYTE_ACKDET] =
"start byte acknowledged",
[ABRT_SBYTE_NORSTRT] =
"trying to send start byte when restart is disabled",
[ABRT_10B_RD_NORSTRT] =
"trying to read when restart is disabled (10bit mode)",
[ABRT_MASTER_DIS] =
"trying to use disabled adapter",
[ARB_LOST] =
"lost arbitration",
[ABRT_SLAVE_FLUSH_TXFIFO] =
"read command so flush old data in the TX FIFO",
[ABRT_SLAVE_ARBLOST] =
"slave lost the bus while transmitting data to a remote master",
[ABRT_SLAVE_RD_INTX] =
"incorrect slave-transmitter mode configuration",
};
static int dw_reg_read(void *context, unsigned int reg, unsigned int *val)
{
struct dw_i2c_dev *dev = context;
*val = readl(dev->base + reg);
return 0;
}
static int dw_reg_write(void *context, unsigned int reg, unsigned int val)
{
struct dw_i2c_dev *dev = context;
writel(val, dev->base + reg);
return 0;
}
static int dw_reg_read_swab(void *context, unsigned int reg, unsigned int *val)
{
struct dw_i2c_dev *dev = context;
*val = swab32(readl(dev->base + reg));
return 0;
}
static int dw_reg_write_swab(void *context, unsigned int reg, unsigned int val)
{
struct dw_i2c_dev *dev = context;
writel(swab32(val), dev->base + reg);
return 0;
}
static int dw_reg_read_word(void *context, unsigned int reg, unsigned int *val)
{
struct dw_i2c_dev *dev = context;
*val = readw(dev->base + reg) |
(readw(dev->base + reg + 2) << 16);
return 0;
}
static int dw_reg_write_word(void *context, unsigned int reg, unsigned int val)
{
struct dw_i2c_dev *dev = context;
writew(val, dev->base + reg);
writew(val >> 16, dev->base + reg + 2);
return 0;
}
/**
* i2c_dw_init_regmap() - Initialize registers map
* @dev: device private data
*
* Autodetects needed register access mode and creates the regmap with
* corresponding read/write callbacks. This must be called before doing any
* other register access.
*/
int i2c_dw_init_regmap(struct dw_i2c_dev *dev)
{
struct regmap_config map_cfg = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
.disable_locking = true,
.reg_read = dw_reg_read,
.reg_write = dw_reg_write,
.max_register = DW_IC_COMP_TYPE,
};
u32 reg;
int ret;
/*
* Skip detecting the registers map configuration if the regmap has
* already been provided by a higher code.
*/
if (dev->map)
return 0;
ret = i2c_dw_acquire_lock(dev);
if (ret)
return ret;
reg = readl(dev->base + DW_IC_COMP_TYPE);
i2c_dw_release_lock(dev);
if ((dev->flags & MODEL_MASK) == MODEL_AMD_NAVI_GPU)
map_cfg.max_register = AMD_UCSI_INTR_REG;
if (reg == swab32(DW_IC_COMP_TYPE_VALUE)) {
map_cfg.reg_read = dw_reg_read_swab;
map_cfg.reg_write = dw_reg_write_swab;
} else if (reg == (DW_IC_COMP_TYPE_VALUE & 0x0000ffff)) {
map_cfg.reg_read = dw_reg_read_word;
map_cfg.reg_write = dw_reg_write_word;
} else if (reg != DW_IC_COMP_TYPE_VALUE) {
dev_err(dev->dev,
"Unknown Synopsys component type: 0x%08x\n", reg);
return -ENODEV;
}
/*
* Note we'll check the return value of the regmap IO accessors only
* at the probe stage. The rest of the code won't do this because
* basically we have MMIO-based regmap so non of the read/write methods
* can fail.
*/
dev->map = devm_regmap_init(dev->dev, NULL, dev, &map_cfg);
if (IS_ERR(dev->map)) {
dev_err(dev->dev, "Failed to init the registers map\n");
return PTR_ERR(dev->map);
}
return 0;
}
static const u32 supported_speeds[] = {
I2C_MAX_HIGH_SPEED_MODE_FREQ,
I2C_MAX_FAST_MODE_PLUS_FREQ,
I2C_MAX_FAST_MODE_FREQ,
I2C_MAX_STANDARD_MODE_FREQ,
};
static int i2c_dw_validate_speed(struct dw_i2c_dev *dev)
{
struct i2c_timings *t = &dev->timings;
unsigned int i;
/*
* Only standard mode at 100kHz, fast mode at 400kHz,
* fast mode plus at 1MHz and high speed mode at 3.4MHz are supported.
*/
for (i = 0; i < ARRAY_SIZE(supported_speeds); i++) {
if (t->bus_freq_hz == supported_speeds[i])
return 0;
}
dev_err(dev->dev,
"%d Hz is unsupported, only 100kHz, 400kHz, 1MHz and 3.4MHz are supported\n",
t->bus_freq_hz);
return -EINVAL;
}
#ifdef CONFIG_OF
#include <linux/platform_device.h>
#define MSCC_ICPU_CFG_TWI_DELAY 0x0
#define MSCC_ICPU_CFG_TWI_DELAY_ENABLE BIT(0)
#define MSCC_ICPU_CFG_TWI_SPIKE_FILTER 0x4
static int mscc_twi_set_sda_hold_time(struct dw_i2c_dev *dev)
{
writel((dev->sda_hold_time << 1) | MSCC_ICPU_CFG_TWI_DELAY_ENABLE,
dev->ext + MSCC_ICPU_CFG_TWI_DELAY);
return 0;
}
static void i2c_dw_of_configure(struct device *device)
{
struct platform_device *pdev = to_platform_device(device);
struct dw_i2c_dev *dev = dev_get_drvdata(device);
switch (dev->flags & MODEL_MASK) {
case MODEL_MSCC_OCELOT:
dev->ext = devm_platform_ioremap_resource(pdev, 1);
if (!IS_ERR(dev->ext))
dev->set_sda_hold_time = mscc_twi_set_sda_hold_time;
break;
default:
break;
}
}
#else /* CONFIG_OF */
static inline void i2c_dw_of_configure(struct device *device) { }
#endif /* CONFIG_OF */
#ifdef CONFIG_ACPI
#include <linux/dmi.h>
/*
* The HCNT/LCNT information coming from ACPI should be the most accurate
* for given platform. However, some systems get it wrong. On such systems
* we get better results by calculating those based on the input clock.
*/
static const struct dmi_system_id i2c_dw_no_acpi_params[] = {
{
.ident = "Dell Inspiron 7348",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7348"),
},
},
{}
};
static void i2c_dw_acpi_params(struct device *device, char method[],
u16 *hcnt, u16 *lcnt, u32 *sda_hold)
{
struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER };
acpi_handle handle = ACPI_HANDLE(device);
union acpi_object *obj;
if (dmi_check_system(i2c_dw_no_acpi_params))
return;
if (ACPI_FAILURE(acpi_evaluate_object(handle, method, NULL, &buf)))
return;
obj = (union acpi_object *)buf.pointer;
if (obj->type == ACPI_TYPE_PACKAGE && obj->package.count == 3) {
const union acpi_object *objs = obj->package.elements;
*hcnt = (u16)objs[0].integer.value;
*lcnt = (u16)objs[1].integer.value;
*sda_hold = (u32)objs[2].integer.value;
}
kfree(buf.pointer);
}
static void i2c_dw_acpi_configure(struct device *device)
{
struct dw_i2c_dev *dev = dev_get_drvdata(device);
struct i2c_timings *t = &dev->timings;
u32 ss_ht = 0, fp_ht = 0, hs_ht = 0, fs_ht = 0;
/*
* Try to get SDA hold time and *CNT values from an ACPI method for
* selected speed modes.
*/
i2c_dw_acpi_params(device, "SSCN", &dev->ss_hcnt, &dev->ss_lcnt, &ss_ht);
i2c_dw_acpi_params(device, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt, &fs_ht);
i2c_dw_acpi_params(device, "FPCN", &dev->fp_hcnt, &dev->fp_lcnt, &fp_ht);
i2c_dw_acpi_params(device, "HSCN", &dev->hs_hcnt, &dev->hs_lcnt, &hs_ht);
switch (t->bus_freq_hz) {
case I2C_MAX_STANDARD_MODE_FREQ:
dev->sda_hold_time = ss_ht;
break;
case I2C_MAX_FAST_MODE_PLUS_FREQ:
dev->sda_hold_time = fp_ht;
break;
case I2C_MAX_HIGH_SPEED_MODE_FREQ:
dev->sda_hold_time = hs_ht;
break;
case I2C_MAX_FAST_MODE_FREQ:
default:
dev->sda_hold_time = fs_ht;
break;
}
}
static u32 i2c_dw_acpi_round_bus_speed(struct device *device)
{
u32 acpi_speed;
int i;
acpi_speed = i2c_acpi_find_bus_speed(device);
/*
* Some DSTDs use a non standard speed, round down to the lowest
* standard speed.
*/
for (i = 0; i < ARRAY_SIZE(supported_speeds); i++) {
if (acpi_speed >= supported_speeds[i])
return supported_speeds[i];
}
return 0;
}
#else /* CONFIG_ACPI */
static inline void i2c_dw_acpi_configure(struct device *device) { }
static inline u32 i2c_dw_acpi_round_bus_speed(struct device *device) { return 0; }
#endif /* CONFIG_ACPI */
static void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev)
{
u32 acpi_speed = i2c_dw_acpi_round_bus_speed(dev->dev);
struct i2c_timings *t = &dev->timings;
/*
* Find bus speed from the "clock-frequency" device property, ACPI
* or by using fast mode if neither is set.
*/
if (acpi_speed && t->bus_freq_hz)
t->bus_freq_hz = min(t->bus_freq_hz, acpi_speed);
else if (acpi_speed || t->bus_freq_hz)
t->bus_freq_hz = max(t->bus_freq_hz, acpi_speed);
else
t->bus_freq_hz = I2C_MAX_FAST_MODE_FREQ;
}
int i2c_dw_fw_parse_and_configure(struct dw_i2c_dev *dev)
{
struct i2c_timings *t = &dev->timings;
struct device *device = dev->dev;
struct fwnode_handle *fwnode = dev_fwnode(device);
i2c_parse_fw_timings(device, t, false);
i2c_dw_adjust_bus_speed(dev);
if (is_of_node(fwnode))
i2c_dw_of_configure(device);
else if (is_acpi_node(fwnode))
i2c_dw_acpi_configure(device);
return i2c_dw_validate_speed(dev);
}
EXPORT_SYMBOL_GPL(i2c_dw_fw_parse_and_configure);
static u32 i2c_dw_read_scl_reg(struct dw_i2c_dev *dev, u32 reg)
{
u32 val;
int ret;
ret = i2c_dw_acquire_lock(dev);
if (ret)
return 0;
ret = regmap_read(dev->map, reg, &val);
i2c_dw_release_lock(dev);
return ret ? 0 : val;
}
u32 i2c_dw_scl_hcnt(struct dw_i2c_dev *dev, unsigned int reg, u32 ic_clk,
u32 tSYMBOL, u32 tf, int cond, int offset)
{
if (!ic_clk)
return i2c_dw_read_scl_reg(dev, reg);
/*
* DesignWare I2C core doesn't seem to have solid strategy to meet
* the tHD;STA timing spec. Configuring _HCNT based on tHIGH spec
* will result in violation of the tHD;STA spec.
*/
if (cond)
/*
* Conditional expression:
*
* IC_[FS]S_SCL_HCNT + (1+4+3) >= IC_CLK * tHIGH
*
* This is based on the DW manuals, and represents an ideal
* configuration. The resulting I2C bus speed will be
* faster than any of the others.
*
* If your hardware is free from tHD;STA issue, try this one.
*/
return DIV_ROUND_CLOSEST_ULL((u64)ic_clk * tSYMBOL, MICRO) -
8 + offset;
else
/*
* Conditional expression:
*
* IC_[FS]S_SCL_HCNT + 3 >= IC_CLK * (tHD;STA + tf)
*
* This is just experimental rule; the tHD;STA period turned
* out to be proportinal to (_HCNT + 3). With this setting,
* we could meet both tHIGH and tHD;STA timing specs.
*
* If unsure, you'd better to take this alternative.
*
* The reason why we need to take into account "tf" here,
* is the same as described in i2c_dw_scl_lcnt().
*/
return DIV_ROUND_CLOSEST_ULL((u64)ic_clk * (tSYMBOL + tf), MICRO) -
3 + offset;
}
u32 i2c_dw_scl_lcnt(struct dw_i2c_dev *dev, unsigned int reg, u32 ic_clk,
u32 tLOW, u32 tf, int offset)
{
if (!ic_clk)
return i2c_dw_read_scl_reg(dev, reg);
/*
* Conditional expression:
*
* IC_[FS]S_SCL_LCNT + 1 >= IC_CLK * (tLOW + tf)
*
* DW I2C core starts counting the SCL CNTs for the LOW period
* of the SCL clock (tLOW) as soon as it pulls the SCL line.
* In order to meet the tLOW timing spec, we need to take into
* account the fall time of SCL signal (tf). Default tf value
* should be 0.3 us, for safety.
*/
return DIV_ROUND_CLOSEST_ULL((u64)ic_clk * (tLOW + tf), MICRO) -
1 + offset;
}
int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev)
{
unsigned int reg;
int ret;
ret = i2c_dw_acquire_lock(dev);
if (ret)
return ret;
/* Configure SDA Hold Time if required */
ret = regmap_read(dev->map, DW_IC_COMP_VERSION, ®);
if (ret)
goto err_release_lock;
if (reg >= DW_IC_SDA_HOLD_MIN_VERS) {
if (!dev->sda_hold_time) {
/* Keep previous hold time setting if no one set it */
ret = regmap_read(dev->map, DW_IC_SDA_HOLD,
&dev->sda_hold_time);
if (ret)
goto err_release_lock;
}
/*
* Workaround for avoiding TX arbitration lost in case I2C
* slave pulls SDA down "too quickly" after falling edge of
* SCL by enabling non-zero SDA RX hold. Specification says it
* extends incoming SDA low to high transition while SCL is
* high but it appears to help also above issue.
*/
if (!(dev->sda_hold_time & DW_IC_SDA_HOLD_RX_MASK))
dev->sda_hold_time |= 1 << DW_IC_SDA_HOLD_RX_SHIFT;
dev_dbg(dev->dev, "SDA Hold Time TX:RX = %d:%d\n",
dev->sda_hold_time & ~(u32)DW_IC_SDA_HOLD_RX_MASK,
dev->sda_hold_time >> DW_IC_SDA_HOLD_RX_SHIFT);
} else if (dev->set_sda_hold_time) {
dev->set_sda_hold_time(dev);
} else if (dev->sda_hold_time) {
dev_warn(dev->dev,
"Hardware too old to adjust SDA hold time.\n");
dev->sda_hold_time = 0;
}
err_release_lock:
i2c_dw_release_lock(dev);
return ret;
}
void __i2c_dw_disable(struct dw_i2c_dev *dev)
{
struct i2c_timings *t = &dev->timings;
unsigned int raw_intr_stats, ic_stats;
unsigned int enable;
int timeout = 100;
bool abort_needed;
unsigned int status;
int ret;
regmap_read(dev->map, DW_IC_RAW_INTR_STAT, &raw_intr_stats);
regmap_read(dev->map, DW_IC_STATUS, &ic_stats);
regmap_read(dev->map, DW_IC_ENABLE, &enable);
abort_needed = (raw_intr_stats & DW_IC_INTR_MST_ON_HOLD) ||
(ic_stats & DW_IC_STATUS_MASTER_HOLD_TX_FIFO_EMPTY);
if (abort_needed) {
if (!(enable & DW_IC_ENABLE_ENABLE)) {
regmap_write(dev->map, DW_IC_ENABLE, DW_IC_ENABLE_ENABLE);
/*
* Wait 10 times the signaling period of the highest I2C
* transfer supported by the driver (for 400KHz this is
* 25us) to ensure the I2C ENABLE bit is already set
* as described in the DesignWare I2C databook.
*/
fsleep(DIV_ROUND_CLOSEST_ULL(10 * MICRO, t->bus_freq_hz));
/* Set ENABLE bit before setting ABORT */
enable |= DW_IC_ENABLE_ENABLE;
}
regmap_write(dev->map, DW_IC_ENABLE, enable | DW_IC_ENABLE_ABORT);
ret = regmap_read_poll_timeout(dev->map, DW_IC_ENABLE, enable,
!(enable & DW_IC_ENABLE_ABORT), 10,
100);
if (ret)
dev_err(dev->dev, "timeout while trying to abort current transfer\n");
}
do {
__i2c_dw_disable_nowait(dev);
/*
* The enable status register may be unimplemented, but
* in that case this test reads zero and exits the loop.
*/
regmap_read(dev->map, DW_IC_ENABLE_STATUS, &status);
if ((status & 1) == 0)
return;
/*
* Wait 10 times the signaling period of the highest I2C
* transfer supported by the driver (for 400KHz this is
* 25us) as described in the DesignWare I2C databook.
*/
usleep_range(25, 250);
} while (timeout--);
dev_warn(dev->dev, "timeout in disabling adapter\n");
}
u32 i2c_dw_clk_rate(struct dw_i2c_dev *dev)
{
/*
* Clock is not necessary if we got LCNT/HCNT values directly from
* the platform code.
*/
if (WARN_ON_ONCE(!dev->get_clk_rate_khz))
return 0;
return dev->get_clk_rate_khz(dev);
}
int i2c_dw_prepare_clk(struct dw_i2c_dev *dev, bool prepare)
{
int ret;
if (prepare) {
/* Optional interface clock */
ret = clk_prepare_enable(dev->pclk);
if (ret)
return ret;
ret = clk_prepare_enable(dev->clk);
if (ret)
clk_disable_unprepare(dev->pclk);
return ret;
}
clk_disable_unprepare(dev->clk);
clk_disable_unprepare(dev->pclk);
return 0;
}
EXPORT_SYMBOL_GPL(i2c_dw_prepare_clk);
int i2c_dw_acquire_lock(struct dw_i2c_dev *dev)
{
int ret;
if (!dev->acquire_lock)
return 0;
ret = dev->acquire_lock();
if (!ret)
return 0;
dev_err(dev->dev, "couldn't acquire bus ownership\n");
return ret;
}
void i2c_dw_release_lock(struct dw_i2c_dev *dev)
{
if (dev->release_lock)
dev->release_lock();
}
/*
* Waiting for bus not busy
*/
int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
{
unsigned int status;
int ret;
ret = regmap_read_poll_timeout(dev->map, DW_IC_STATUS, status,
!(status & DW_IC_STATUS_ACTIVITY),
1100, 20000);
if (ret) {
dev_warn(dev->dev, "timeout waiting for bus ready\n");
i2c_recover_bus(&dev->adapter);
regmap_read(dev->map, DW_IC_STATUS, &status);
if (!(status & DW_IC_STATUS_ACTIVITY))
ret = 0;
}
return ret;
}
int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
{
unsigned long abort_source = dev->abort_source;
int i;
if (abort_source & DW_IC_TX_ABRT_NOACK) {
for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources))
dev_dbg(dev->dev,
"%s: %s\n", __func__, abort_sources[i]);
return -EREMOTEIO;
}
for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources))
dev_err(dev->dev, "%s: %s\n", __func__, abort_sources[i]);
if (abort_source & DW_IC_TX_ARB_LOST)
return -EAGAIN;
else if (abort_source & DW_IC_TX_ABRT_GCALL_READ)
return -EINVAL; /* wrong msgs[] data */
else
return -EIO;
}
int i2c_dw_set_fifo_size(struct dw_i2c_dev *dev)
{
u32 tx_fifo_depth, rx_fifo_depth;
unsigned int param;
int ret;
/* DW_IC_COMP_PARAM_1 not implement for IP issue */
if ((dev->flags & MODEL_MASK) == MODEL_WANGXUN_SP) {
dev->tx_fifo_depth = TXGBE_TX_FIFO_DEPTH;
dev->rx_fifo_depth = TXGBE_RX_FIFO_DEPTH;
return 0;
}
/*
* Try to detect the FIFO depth if not set by interface driver,
* the depth could be from 2 to 256 from HW spec.
*/
ret = i2c_dw_acquire_lock(dev);
if (ret)
return ret;
ret = regmap_read(dev->map, DW_IC_COMP_PARAM_1, ¶m);
i2c_dw_release_lock(dev);
if (ret)
return ret;
tx_fifo_depth = ((param >> 16) & 0xff) + 1;
rx_fifo_depth = ((param >> 8) & 0xff) + 1;
if (!dev->tx_fifo_depth) {
dev->tx_fifo_depth = tx_fifo_depth;
dev->rx_fifo_depth = rx_fifo_depth;
} else if (tx_fifo_depth >= 2) {
dev->tx_fifo_depth = min_t(u32, dev->tx_fifo_depth,
tx_fifo_depth);
dev->rx_fifo_depth = min_t(u32, dev->rx_fifo_depth,
rx_fifo_depth);
}
return 0;
}
u32 i2c_dw_func(struct i2c_adapter *adap)
{
struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
return dev->functionality;
}
void i2c_dw_disable(struct dw_i2c_dev *dev)
{
unsigned int dummy;
int ret;
ret = i2c_dw_acquire_lock(dev);
if (ret)
return;
/* Disable controller */
__i2c_dw_disable(dev);
/* Disable all interrupts */
__i2c_dw_write_intr_mask(dev, 0);
regmap_read(dev->map, DW_IC_CLR_INTR, &dummy);
i2c_dw_release_lock(dev);
}
EXPORT_SYMBOL_GPL(i2c_dw_disable);
int i2c_dw_probe(struct dw_i2c_dev *dev)
{
device_set_node(&dev->adapter.dev, dev_fwnode(dev->dev));
switch (dev->mode) {
case DW_IC_SLAVE:
return i2c_dw_probe_slave(dev);
case DW_IC_MASTER:
return i2c_dw_probe_master(dev);
default:
dev_err(dev->dev, "Wrong operation mode: %d\n", dev->mode);
return -EINVAL;
}
}
EXPORT_SYMBOL_GPL(i2c_dw_probe);
static int i2c_dw_prepare(struct device *device)
{
/*
* If the ACPI companion device object is present for this device,
* it may be accessed during suspend and resume of other devices via
* I2C operation regions, so tell the PM core and middle layers to
* avoid skipping system suspend/resume callbacks for it in that case.
*/
return !has_acpi_companion(device);
}
static int i2c_dw_runtime_suspend(struct device *device)
{
struct dw_i2c_dev *dev = dev_get_drvdata(device);
if (dev->shared_with_punit)
return 0;
i2c_dw_disable(dev);
i2c_dw_prepare_clk(dev, false);
return 0;
}
static int i2c_dw_suspend(struct device *device)
{
struct dw_i2c_dev *dev = dev_get_drvdata(device);
i2c_mark_adapter_suspended(&dev->adapter);
return i2c_dw_runtime_suspend(device);
}
static int i2c_dw_runtime_resume(struct device *device)
{
struct dw_i2c_dev *dev = dev_get_drvdata(device);
if (!dev->shared_with_punit)
i2c_dw_prepare_clk(dev, true);
dev->init(dev);
return 0;
}
static int i2c_dw_resume(struct device *device)
{
struct dw_i2c_dev *dev = dev_get_drvdata(device);
i2c_dw_runtime_resume(device);
i2c_mark_adapter_resumed(&dev->adapter);
return 0;
}
EXPORT_GPL_DEV_PM_OPS(i2c_dw_dev_pm_ops) = {
.prepare = pm_sleep_ptr(i2c_dw_prepare),
LATE_SYSTEM_SLEEP_PM_OPS(i2c_dw_suspend, i2c_dw_resume)
RUNTIME_PM_OPS(i2c_dw_runtime_suspend, i2c_dw_runtime_resume, NULL)
};
MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter core");
MODULE_LICENSE("GPL");
|