1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/thermal/qcom-spmi-adc-tm5.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm's SPMI PMIC ADC Thermal Monitoring
maintainers:
- Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
$ref: thermal-sensor.yaml#
properties:
compatible:
enum:
- qcom,spmi-adc-tm5
- qcom,spmi-adc-tm5-gen2
- qcom,adc-tm7 # Incomplete / subject to change
reg:
maxItems: 1
interrupts:
maxItems: 1
"#thermal-sensor-cells":
const: 1
"#address-cells":
const: 1
"#size-cells":
const: 0
qcom,avg-samples:
$ref: /schemas/types.yaml#/definitions/uint32
description: Number of samples to be used for measurement.
Not applicable for Gen2 ADC_TM peripheral.
enum:
- 1
- 2
- 4
- 8
- 16
default: 1
qcom,decimation:
$ref: /schemas/types.yaml#/definitions/uint32
description: This parameter is used to decrease ADC sampling rate.
Quicker measurements can be made by reducing decimation ratio.
Not applicable for Gen2 ADC_TM peripheral.
enum:
- 250
- 420
- 840
default: 840
patternProperties:
"^([-a-z0-9]*)@[0-7]$":
type: object
description:
Represent one thermal sensor.
properties:
reg:
description: Specify the sensor channel. There are 8 channels in PMIC5's ADC TM
minimum: 0
maximum: 7
io-channels:
description:
From common IIO binding. Used to pipe PMIC ADC channel to thermal monitor
qcom,ratiometric:
$ref: /schemas/types.yaml#/definitions/flag
description:
Channel calibration type.
If this property is specified VADC will use the VDD reference
(1.875V) and GND for channel calibration. If property is not found,
channel will be calibrated with 0V and 1.25V reference channels,
also known as absolute calibration.
qcom,hw-settle-time-us:
description: Time between AMUX getting configured and the ADC starting conversion.
enum: [15, 100, 200, 300, 400, 500, 600, 700, 1000, 2000, 4000, 8000, 16000, 32000, 64000, 128000]
qcom,pre-scaling:
$ref: /schemas/types.yaml#/definitions/uint32-array
description: Used for scaling the channel input signal before the
signal is fed to VADC. The configuration for this node is to know the
pre-determined ratio and use it for post scaling. It is a pair of
integers, denoting the numerator and denominator of the fraction by
which input signal is multiplied. For example, <1 3> indicates the
signal is scaled down to 1/3 of its value before ADC measurement. If
property is not found default value depending on chip will be used.
items:
- const: 1
- enum: [ 1, 3, 4, 6, 20, 8, 10 ]
qcom,avg-samples:
$ref: /schemas/types.yaml#/definitions/uint32
description: Number of samples to be used for measurement.
This property in child node is applicable only for Gen2 ADC_TM peripheral.
enum:
- 1
- 2
- 4
- 8
- 16
default: 1
qcom,decimation:
$ref: /schemas/types.yaml#/definitions/uint32
description: This parameter is used to decrease ADC sampling rate.
Quicker measurements can be made by reducing decimation ratio.
This property in child node is applicable only for Gen2 ADC_TM peripheral.
enum:
- 85
- 340
- 1360
default: 1360
required:
- reg
- io-channels
additionalProperties:
false
allOf:
- if:
properties:
compatible:
contains:
const: qcom,spmi-adc-tm5
then:
patternProperties:
"^([-a-z0-9]*)@[0-7]$":
properties:
qcom,decimation: false
qcom,avg-samples: false
- if:
properties:
compatible:
contains:
const: qcom,spmi-adc-tm5-gen2
then:
properties:
qcom,avg-samples: false
qcom,decimation: false
required:
- compatible
- reg
- interrupts
- "#address-cells"
- "#size-cells"
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/iio/qcom,spmi-vadc.h>
#include <dt-bindings/interrupt-controller/irq.h>
pmic {
#address-cells = <1>;
#size-cells = <0>;
pm8150b_adc: adc@3100 {
compatible = "qcom,spmi-adc5";
reg = <0x3100>;
#address-cells = <1>;
#size-cells = <0>;
#io-channel-cells = <1>;
/* Other properties are omitted */
channel@4f {
reg = <ADC5_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
label = "conn_therm";
};
};
adc-tm@3500 {
compatible = "qcom,spmi-adc-tm5";
reg = <0x3500>;
interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
#thermal-sensor-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
conn-therm@0 {
reg = <0>;
io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
};
};
- |
#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
#include <dt-bindings/interrupt-controller/irq.h>
pmic {
#address-cells = <1>;
#size-cells = <0>;
pmk8350_vadc: adc@3100 {
compatible = "qcom,spmi-adc7";
reg = <0x3100>;
#address-cells = <1>;
#size-cells = <0>;
#io-channel-cells = <1>;
/* Other properties are omitted */
channel@44 {
reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
label = "xo_therm";
};
channel@147 {
reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
label = "conn_therm";
};
};
adc-tm@3400 {
compatible = "qcom,spmi-adc-tm5-gen2";
reg = <0x3400>;
interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
#thermal-sensor-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
pmk8350-xo-therm@0 {
reg = <0>;
io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
qcom,decimation = <340>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
conn-therm@1 {
reg = <1>;
io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
qcom,avg-samples = <2>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
};
};
...
|