summaryrefslogtreecommitdiff
path: root/sound/soc/omap/omap-hdmi.c
AgeCommit message (Collapse)AuthorFilesLines
2014-12-01ASoC: omap: Remove obsolete HDMI audio code and Kconfig optionsJyri Sarha1-364/+0
Removes omap-hdmi DAI driver, omap-hdmi-card driver, the related Kconfig options, and Makefile entries. The HDMI DAI drivers has been integrated directly to OMAP4+ HDMI drivers and simple-card driver is used instead of omap-hdmi-card driver. Signed-off-by: Jyri Sarha <jsarha@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-26ASoC: omap-pcm: Move omap-pcm under include/soundJyri Sarha1-1/+1
Make including the omap-pcm.h outside sound/soc/omap more convenient. Signed-off-by: Jyri Sarha <jsarha@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-22ASoC: omap-hdmi: Remove excess curly bracketPeter Ujfalusi1-1/+0
Fix the error added by commit: ASoC: omap-hdmi: Bind the platform driver to the dai driver when loading Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-18ASoC: omap-hdmi: Bind the platform driver to the dai driver when loadingPeter Ujfalusi1-1/+6
Use the same device for the platform driver when registering as the dai driver. This will enable us to clean up some DT booted cases. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-04-12Merge remote-tracking branch 'asoc/topic/dma' into asoc-nextMark Brown1-14/+10
2013-04-03ASoC: omap: Use common DAI DMA dataLars-Peter Clausen1-14/+10
Use the common DAI DMA data struct for omap, this allows us to use the common helper function to configure the DMA slave config based on the DAI DMA data. For omap-dmic and omap-mcpdm also move the DMA data from a global variable to the driver state struct. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-26ASoC: switch over to use snd_soc_register_component() on omap hdmiKuninori Morimoto1-2/+7
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-11ASoC: OMAP: HDMI: Initialize IEC-60958 channel status wordRicardo Neri1-0/+2
As the IEC-60958 channel status word is set by ANDing and ORing with the appropriate definitions, the word bytes need to be initialized to zero to avoid misconfiguration due to previous hw_params calls. Signed-off-by: Ricardo Neri <rneri@dextratech.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-10ASoC: OMAP: remove __dev* attributesBill Pemberton1-3/+3
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: OMAP: mcbsp, mcpdm, dmic, hdmi: Set dma_data at startup timePeter Ujfalusi1-6/+9
Set the dma_data for the stream (snd_soc_dai_set_dma_data) at dai_startup time so omap-pcm will have access to the needed information regarding to the DMA channel earlier. This is needed for the clean dmaengine support. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: omap-pcm, omap-dmic: Change the use of omap_pcm_dma_data->data_typePeter Ujfalusi1-2/+1
Instead of the OMAP DMA data type definition the data_type will be used to specify the number of bits the DMA word should be configured or 0 in case when based on the stream's format the omap-pcm can decide the needed DMA word size. This feature is needed for the omap-hdmi where the sDMA need to be configured for 32bit word type regardless of the audio format used. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: OMAP: Remove sync_mode from omap_pcm_dma_data structPeter Ujfalusi1-1/+0
The omap-pcm platform driver no longer needs this parameter to select between ELEMENT and PACKET mode. The selection is based on the configured packet_size. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-22ASoC: OMAP: HDMI: Expand capabilities of the HDMI DAIRicardo Neri1-1/+1
According to the HDMI specification, a source is permitted to transmit L-PCM audio in the following sample rates: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz or 192kHz. It also supports up to 8 audio channels. The sink may not necessarily support all these sample rates and channels. However, as this CPU DAI describes the HDMI source, it makes sense to include them. The limitation of capabilities as supported by the sink should be done in the ASoC HDMI codec. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-05-22ASoC: OMAP: HDMI: Improve how the display state is verifiedRicardo Neri1-1/+8
Before starting to play audio, we need to make sure that the display is active and the current video mode supports audio. instead of using the overlay manager in the machine driver, we use the DSS audio interface's audio_supported function. As we already have a pointer to the correct dssdev, we do not have to look for it every time audio is to be played. Also, the CPU DAI startup function is called earlier than the card hw_param function. Hence and we can detect the state of the display earlier. While there, add a error message if the constraint cannot be applied. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> squash to improve err Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-05-22ASoC: OMAP: HDMI: Expand configuration of hw_paramsRicardo Neri1-1/+115
Expand the configuration of the hw_params to include the IEC-60958 channel status word and the CEA-861 audio infoframe. The configuration of such structures depends on the snd_pcm_hw_params received. A omap_dss_audio is used to pass the configuration parameters to DSS. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-05-22ASoC: OMAP: HDMI: Use the DSS audio interfaceRicardo Neri1-0/+77
Instead of accessing the HDMI IP directly, the CPU DAI driver takes advantage of the audio interface provided by the DSS device driver. The ASoC driver will link the DSS audio functionality with ALSA by calling the appropriate DSS device driver functions at the relevant moments. For this, three new DAI operations are added: trigger, prepare and shutdown operations. At the moment, it is assumed that only one HDMI display is available in the system, as it is the case in OMAP4. However, in the future, one DAI for each HDMI display should be provided. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-05-22ASoC: OMAP: HDMI: Create a structure for private data of the CPU DAIRicardo Neri1-9/+19
Create a struct hdmi_priv to store the relevant data of the CPU DAI driver. As more data is added to the driver, having all the data in the same location eases its handling. At the moment, only the DMA configuration parameters are included in the structure. Also, the required memory is allocated using devm_kzalloc rather than using a static global variable. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-05-22ASoC: OMAP: HDMI: Change error values in HDMI CPU DAIRicardo Neri1-2/+2
When getting the needed resources fails, return -ENODEV. This is more in line with other drivers do and it gives a more descriptive error. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-05-22ASoC: OMAP: HDMI: Update the platform device namesRicardo Neri1-1/+1
In order to utilize the new OMAP HDMI codec and the updated name of the device of the CPU DAI, update the names at the drivers accordingly. While there, also update the name of the machine driver to be more generic and encompass more OMAP processors featuring HDMI and not only OMAP4. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2011-11-25ASoC: Convert omap directory to module_platform_driverAxel Lin1-11/+1
Factor out some boilerplate code. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23ASoC: Constify snd_soc_dai_ops structsLars-Peter Clausen1-1/+1
Commit 1ee46ebd("ASoC: Make the DAI ops constant in the DAI structure") introduced the possibility to have constant DAI ops structures, yet this is barley used in both existing drivers and also new drivers being submitted, although none of them modifies its DAI ops structure. The later is not surprising since existing drivers are often used as templates for new drivers. So this patch just constifies all existing snd_soc_dai_ops structs to eliminate the issue altogether. The patch was generated with the following coccinelle semantic patch: // <smpl> @@ identifier ops; @@ -struct snd_soc_dai_ops ops = +const struct snd_soc_dai_ops ops = { ... }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-03ASoC: OMAP: Add CPU DAI driver for HDMIRicardo Neri1-0/+158
Addition of the HDMI CPU DAI driver for OMAP4. This driver is in charge of configuring DMA settings for HDMI. Also, it finds the HDMI video device and determines if audio playback can proceed. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 01:51:26 +0000