summaryrefslogtreecommitdiff
path: root/drivers/usb/otg/msm_otg.c
AgeCommit message (Collapse)AuthorFilesLines
2013-03-18usb: phy: move all PHY drivers to drivers/usb/phy/Felipe Balbi1-1762/+0
that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-17usb: converto drivers/usb/* to use module_platform_driver_probe()Fabio Porcedda1-12/+1
This patch converts the drivers in drivers/usb/* to use the module_platform_driver_probe() macro which makes the code smaller and a bit simpler. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21usb: remove use of __devexitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Li Yang <leoli@freescale.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21usb: remove use of __devexit_pBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Li Yang <leoli@freescale.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-25usb: otg: support for multiple transceivers by a single controllerKishon Vijay Abraham I1-2/+2
Add a linked list for keeping multiple PHY instances with different types so that we can have separate USB2 and USB3 PHYs on one single board. _get_phy_ has been changed so that the controller gets the transceiver by type. _remove_phy_ has been added to let the phy be removed from the phy list. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-25usb: otg: utils: rename function name in OTG utilsKishon Vijay Abraham I1-3/+3
_transceiver() in otg.c is replaced with _phy. usb_set_transceiver is replaced with usb_add_phy to make it similar to other usb standard function names like usb_add_hcd. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-13usb: otg: msm: Start using struct usb_otgHeikki Krogerus1-193/+205
Use struct usb_otg members with OTG specific functions instead of usb_phy members. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-13usb: otg: Rename otg_transceiver to usb_phyHeikki Krogerus1-27/+27
This is the first step in separating USB transceivers from USB OTG utilities. Includes fixes to IMX code from Sascha Hauer. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Li Yang <leoli@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-17USB: OTG: msm: Free VCCCX regulator even if we can't set the voltageMark Brown1-3/+1
If for some reason we fail to set the voltage range for the VDDCX regulator when removing it's better to still disable and free the regulator as that avoids leaking a reference to it and is likely to ensure that it's turned off completely. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-17USB: OTG: msm: Allow the widest possible range for VDDCX when removingMark Brown1-1/+1
When not active the hardware should be able to tolerate voltages within the normal operating range so when removing set the maximum voltage we can use to the maximum rather than minimum of the operating range. This will improve interoperability in case we end up sharing the supply in some design. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-06USB: OTG: msm: Add PHY suspend support for MSM8960Pavankumar Kondeti1-10/+54
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-06USB: OTG: msm: Configure PHY Analog and Digital voltage domainsAnji jonnala1-0/+189
Signed-off-by: Anji jonnala <anjir@codeaurora.org> Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-06USB: OTG: msm: Implement charger detectionPavankumar Kondeti1-4/+376
Implement good battery algorithm defined in the battery charging V1.2 spec for detecting different charging ports. USB hardware is put into low power mode when connected to a dedicated charging port. vbus_draw and set_power methods are implemented for determining the allowed current from Host in different states (un-configured/suspend/configured). The charger block is implemented using vendor specific registers and the PHY used in MSM8960(28nm PHY) different from older targets like MSM8x60 and MSM7x30(45nm PHY). The PHY vendor and product id registers are not implemented in the above chipsets. Hence PHY type is passed via platform data. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-06USB: OTG: msm: vote for dayatona fabric clockAnji jonnala1-1/+35
HSUSB core clock is derived from daytona fabric clock and for HSUSB operational require minimum core clock at 55MHz. Since, HSUSB cannot tolerate daytona fabric clock change in the middle of HSUSB operational, vote for maximum Daytona fabric clock while usb is operational Signed-off-by: Anji jonnala <anjir@codeaurora.org> Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03USB: OTG: msm: Clear in_lpm flag before enabling the IRQ in resumePavankumar Kondeti1-2/+2
The current code is clearing in_lpm flag after enabling the IRQ. If IRQ comes immediately before in_lpm flag is set, it thinks that hardware is in low power mode and disables the IRQ. Fix this by clearing in_lpm flag before enabling the IRQ. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-07USB: Rename "msm72k_otg.c" to "msm_otg.c"Pavankumar Kondeti1-0/+1124
This driver is used across all MSM SoCs. Hence give a generic name. All Functions and strutures are also using "msm_otg" as prefix. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 15:48:58 +0000