summaryrefslogtreecommitdiff
path: root/drivers/tty/serial
AgeCommit message (Collapse)AuthorFilesLines
12 daysmodule: Convert default symbol namespace to string literalMasahiro Yamada1-1/+1
Commit cdd30ebb1b9f ("module: Convert symbol namespace to string literal") only converted MODULE_IMPORT_NS() and EXPORT_SYMBOL_NS(), leaving DEFAULT_SYMBOL_NAMESPACE as a macro expansion. This commit converts DEFAULT_SYMBOL_NAMESPACE in the same way to avoid annoyance for the default namespace as well. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 daysmodule: Convert symbol namespace to string literalPeter Zijlstra8-9/+9
Clean up the existing export namespace code along the same lines of commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")") and for the same reason, it is not desired for the namespace argument to be a macro expansion itself. Scripted using git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file; do awk -i inplace ' /^#define EXPORT_SYMBOL_NS/ { gsub(/__stringify\(ns\)/, "ns"); print; next; } /^#define MODULE_IMPORT_NS/ { gsub(/__stringify\(ns\)/, "ns"); print; next; } /MODULE_IMPORT_NS/ { $0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g"); } /EXPORT_SYMBOL_NS/ { if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) { if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ && $0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ && $0 !~ /^my/) { getline line; gsub(/[[:space:]]*\\$/, ""); gsub(/[[:space:]]/, "", line); $0 = $0 " " line; } $0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/, "\\1(\\2, \"\\3\")", "g"); } } { print }' $file; done Requested-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc Acked-by: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-11-30Merge tag 'tty-6.13-rc1' of ↵Linus Torvalds70-216/+327
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is a small set of tty and serial driver updates for 6.13-rc1. Nothing major at all this time, only some small changes: - few device tree binding updates - 8250_exar serial driver updates - imx serial driver updates - sprd_serial driver updates - other tiny serial driver updates, full details in the shortlog All of these have been in linux-next for a while with one reported issue, but that commit has now been reverted" * tag 'tty-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (37 commits) Revert "serial: sh-sci: Clean sci_ports[0] after at earlycon exit" serial: amba-pl011: fix build regression dt-bindings: serial: Add a new compatible string for ums9632 serial: sprd: Add support for sc9632 tty/serial/altera_uart: unwrap error log string tty/serial/altera_jtaguart: unwrap error log string serial: amba-pl011: Fix RX stall when DMA is used tty: ldsic: fix tty_ldisc_autoload sysctl's proc_handler serial: 8250_fintek: Add support for F81216E serial: sh-sci: Clean sci_ports[0] after at earlycon exit tty: atmel_serial: Fix typo retreives to retrieves tty: atmel_serial: Use devm_platform_ioremap_resource() serial: 8250: omap: Move pm_runtime_get_sync tty: serial: samsung: Add Exynos8895 compatible dt-bindings: serial: samsung: Add samsung,exynos8895-uart compatible serial: 8250_dw: Add Sophgo SG2044 quirk dt-bindings: serial: snps-dw-apb-uart: Add Sophgo SG2044 uarts dt-bindings: serial: snps,dw-apb-uart: merge duplicate compatible entry. altera_jtaguart: Use dev_err() to report error attaching IRQ altera_uart: Use dev_err() to report error attaching IRQ handler ...
2024-11-30Revert "serial: sh-sci: Clean sci_ports[0] after at earlycon exit"Greg Kroah-Hartman1-28/+0
This reverts commit 3791ea69a4858b81e0277f695ca40f5aae40f312. It was reported to cause boot-time issues, so revert it for now. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: 3791ea69a485 ("serial: sh-sci: Clean sci_ports[0] after at earlycon exit") Cc: stable <stable@kernel.org> Cc: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-26Merge tag 'pci-v6.13-changes' of ↵Linus Torvalds1-5/+7
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Make pci_stop_dev() and pci_destroy_dev() safe so concurrent callers can't stop a device multiple times, even as we migrate from the global pci_rescan_remove_lock to finer-grained locking (Keith Busch) - Improve pci_walk_bus() implementation by making it recursive and moving locking up to avoid need for a 'locked' parameter (Keith Busch) - Unexport pci_walk_bus_locked(), which is only used internally by the PCI core (Keith Busch) - Detect some Thunderbolt chips that are built-in and hence 'trustworthy' by a heuristic since the 'ExternalFacingPort' and 'usb4-host-interface' ACPI properties are not quite enough (Esther Shimanovich) Resource management: - Use PCI bus addresses (not CPU addresses) in 'ranges' properties when building dynamic DT nodes so systems where PCI and CPU addresses differ work correctly (Andrea della Porta) - Tidy resource sizing and assignment with helpers to reduce redundancy (Ilpo Järvinen) - Improve pdev_sort_resources() 'bogus alignment' warning to be more specific (Ilpo Järvinen) Driver binding: - Convert driver .remove_new() callbacks to .remove() again to finish the conversion from returning 'int' to being 'void' (Sergio Paracuellos) - Export pcim_request_all_regions(), a managed interface to request all BARs (Philipp Stanner) - Replace pcim_iomap_regions_request_all() with pcim_request_all_regions(), and pcim_iomap_table()[n] with pcim_iomap(n), in the following drivers: ahci, crypto qat, crypto octeontx2, intel_th, iwlwifi, ntb idt, serial rp2, ALSA korg1212 (Philipp Stanner) - Remove the now unused pcim_iomap_regions_request_all() (Philipp Stanner) - Export pcim_iounmap_region(), a managed interface to unmap and release a PCI BAR (Philipp Stanner) - Replace pcim_iomap_regions(mask) with pcim_iomap_region(n), and pcim_iounmap_regions(mask) with pcim_iounmap_region(n), in the following drivers: fpga dfl-pci, block mtip32xx, gpio-merrifield, cavium (Philipp Stanner) Error handling: - Add sysfs 'reset_subordinate' to reset the entire hierarchy below a bridge; previously Secondary Bus Reset could only be used when there was a single device below a bridge (Keith Busch) - Warn if we reset a running device where the driver didn't register pci_error_handlers notification callbacks (Keith Busch) ASPM: - Disable ASPM L1 before touching L1 PM Substates to follow the spec closer and avoid a CPU load timeout on some platforms (Ajay Agarwal) - Set devices below Intel VMD to D0 before enabling ASPM L1 Substates as required per spec for all L1 Substates changes (Jian-Hong Pan) Power management: - Enable starfive controller runtime PM before probing host bridge (Mayank Rana) - Enable runtime power management for host bridges (Krishna chaitanya chundru) Power control: - Use of_platform_device_create() instead of of_platform_populate() to create pwrctl platform devices so we can control it based on the child nodes (Manivannan Sadhasivam) - Create pwrctrl platform devices only if there's a relevant power supply property (Manivannan Sadhasivam) - Add device link from the pwrctl supplier to the PCI dev to ensure pwrctl drivers are probed before the PCI dev driver; this avoids a race where pwrctl could change device power state while the PCI driver was active (Manivannan Sadhasivam) - Find pwrctl device for removal with of_find_device_by_node() instead of searching all children of the parent (Manivannan Sadhasivam) - Rename 'pwrctl' to 'pwrctrl' to match new bandwidth controller ('bwctrl') and hotplug files (Bjorn Helgaas) Bandwidth control: - Add read/modify/write locking for Link Control 2, which is used to manage Link speed (Ilpo Järvinen) - Extract Link Bandwidth Management Status check into pcie_lbms_seen(), where it can be shared between the bandwidth controller and quirks that use it to help retrain failed links (Ilpo Järvinen) - Re-add Link Bandwidth notification support with updates to address the reasons it was previously reverted (Alexandru Gagniuc, Ilpo Järvinen) - Add pcie_set_target_speed() and related functionality so drivers can manage PCIe Link speed based on thermal or other constraints (Ilpo Järvinen) - Add a thermal cooling driver to throttle PCIe Links via the existing thermal management framework (Ilpo Järvinen) - Add a userspace selftest for the PCIe bandwidth controller (Ilpo Järvinen) PCI device hotplug: - Add hotplug controller driver for Marvell OCTEON multi-function device where function 0 has a management console interface to enable/disable and provision various personalities for the other functions (Shijith Thotton) - Retain a reference to the pci_bus for the lifetime of a pci_slot to avoid a use-after-free when the thunderbolt driver resets USB4 host routers on boot, causing hotplug remove/add of downstream docks or other devices (Lukas Wunner) - Remove unused cpcihp struct cpci_hp_controller_ops.hardware_test (Guilherme Giacomo Simoes) - Remove unused cpqphp struct ctrl_dbg.ctrl (Christophe JAILLET) - Use pci_bus_read_dev_vendor_id() instead of hand-coded presence detection in cpqphp (Ilpo Järvinen) - Simplify cpqphp enumeration, which is already simple-minded and doesn't handle devices below hot-added bridges (Ilpo Järvinen) Virtualization: - Add ACS quirk for Wangxun FF5xxx NICs, which don't advertise an ACS capability but do isolate functions as though PCI_ACS_RR and PCI_ACS_CR were set, so the functions can be in independent IOMMU groups (Mengyuan Lou) TLP Processing Hints (TPH): - Add and document TLP Processing Hints (TPH) support so drivers can enable and disable TPH and the kernel can save/restore TPH configuration (Wei Huang) - Add TPH Steering Tag support so drivers can retrieve Steering Tag values associated with specific CPUs via an ACPI _DSM to improve performance by directing DMA writes closer to their consumers (Wei Huang) Data Object Exchange (DOE): - Wait up to 1 second for DOE Busy bit to clear before writing a request to the mailbox to avoid failures if the mailbox is still busy from a previous transfer (Gregory Price) Endpoint framework: - Skip attempts to allocate from endpoint controller memory window if the requested size is larger than the window (Damien Le Moal) - Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to handle controller-specific size and alignment constraints, and add test cases to the endpoint test driver (Damien Le Moal) - Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can observe DWC-specific alignment requirements (Damien Le Moal) - Synchronously cancel command handler work in endpoint test before cleaning up DMA and BARs (Damien Le Moal) - Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas Cassel) - Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent (Niklas Cassel) - Avoid NULL dereference if Modem Host Interface Endpoint lacks 'mmio' DT property (Zhongqiu Han) - Release PCI domain ID of Endpoint controller parent (not controller itself) and before unregistering the controller, to avoid use-after-free (Zijun Hu) - Clear secondary (not primary) EPC in pci_epc_remove_epf() when removing the secondary controller associated with an NTB (Zijun Hu) Cadence PCIe controller driver: - Lower severity of 'phy-names' message (Bartosz Wawrzyniak) Freescale i.MX6 PCIe controller driver: - Fix suspend/resume support on i.MX6QDL, which has a hardware erratum that prevents use of L2 (Stefan Eichenberger) Intel VMD host bridge driver: - Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel) MediaTek PCIe Gen3 controller driver: - Update mediatek-gen3 DT binding to require the exact number of clocks for each SoC (Fei Shao) - Add support for DT 'max-link-speed' and 'num-lanes' properties to restrict the link speed and width (AngeloGioacchino Del Regno) Microchip PolarFlare PCIe controller driver: - Add DT and driver support for using either of the two PolarFire Root Ports (Conor Dooley) NVIDIA Tegra194 PCIe controller driver: - Move endpoint controller cleanups that depend on refclk from the host to the notifier that tells us the host has deasserted PERST#, when refclk should be valid (Manivannan Sadhasivam) Qualcomm PCIe controller driver: - Add qcom SAR2130P DT binding with an additional clock (Dmitry Baryshkov) - Enable MSI interrupts if 'global' IRQ is supported, since a previous commit unintentionally masked them (Manivannan Sadhasivam) - Move endpoint controller cleanups that depend on refclk from the host to the notifier that tells us the host has deasserted PERST#, when refclk should be valid (Manivannan Sadhasivam) - Add DT binding and driver support for IPQ9574, with Synopsys IP v5.80a and Qcom IP 1.27.0 (devi priya) - Move the OPP "operating-points-v2" table from the qcom,pcie-sm8450.yaml DT binding to qcom,pcie-common.yaml, where it can be used by other Qcom platforms (Qiang Yu) - Add 'global' SPI interrupt for events like link-up, link-down to qcom,pcie-x1e80100 DT binding so we can start enumeration when the link comes up (Qiang Yu) - Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned to support this (Qiang Yu) - Add ops_1_21_0 for SC8280X family SoC, which doesn't use the 'iommu-map' DT property and doesn't need BDF-to-SID translation (Qiang Yu) Rockchip PCIe controller driver: - Define ROCKCHIP_PCIE_AT_SIZE_ALIGN to replace magic 256 endpoint .align value (Damien Le Moal) - When unmapping an endpoint window, compute the region index instead of searching for it, and verify that the address was mapped (Damien Le Moal) - When mapping an endpoint window, verify that the address hasn't been mapped already (Damien Le Moal) - Implement pci_epc_ops.align_addr() for rockchip-ep (Damien Le Moal) - Fix MSI IRQ data mapping to observe the alignment constraint, which fixes intermittent page faults in memcpy_toio() and memcpy_fromio() (Damien Le Moal) - Rename rockchip_pcie_parse_ep_dt() to rockchip_pcie_ep_get_resources() for consistency with similar DT interfaces (Damien Le Moal) - Skip the unnecessary link train in rockchip_pcie_ep_probe() and do it only in the endpoint start operation (Damien Le Moal) - Implement pci_epc_ops.stop_link() to disable link training and controller configuration (Damien Le Moal) - Attempt link training at 5 GT/s when both partners support it (Damien Le Moal) - Add a handler for PERST# signal so we can detect host-initiated resets and start link training after PERST# is deasserted (Damien Le Moal) Synopsys DesignWare PCIe controller driver: - Clear outbound address on unmap so dw_pcie_find_index() won't match an ATU index that was already unmapped (Damien Le Moal) - Use of_property_present() instead of of_property_read_bool() when testing for presence of non-boolean DT properties (Rob Herring) - Advertise 1MB size if endpoint supports Resizable BARs, which was inadvertently lost in v6.11 (Niklas Cassel) TI J721E PCIe driver: - Add PCIe support for J722S SoC (Siddharth Vadapalli) - Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100 us), before deasserting PERST# to ensure power and refclk are stable (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Set the 'ti,keystone-pcie' mode so v3.65a devices work in Root Complex mode (Kishon Vijay Abraham I) - Try to avoid unrecoverable SError for attempts to issue config transactions when the link is down; this is racy but the best we can do (Kishon Vijay Abraham I) Miscellaneous: - Reorganize kerneldoc parameter names to match order in function signature (Julia Lawall) - Fix sysfs reset_method_store() memory leak (Todd Kjos) - Simplify pci_create_slot() (Ilpo Järvinen) - Fix incorrect printf format specifiers in pcitest (Luo Yifan)" * tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (127 commits) PCI: rockchip-ep: Handle PERST# signal in EP mode PCI: rockchip-ep: Improve link training PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation PCI: rockchip-ep: Refactor endpoint link training enable PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt() PCI: rockchip-ep: Fix MSI IRQ data mapping PCI: rockchip-ep: Implement the pci_epc_ops::align_addr() operation PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr() PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr() PCI: rockchip-ep: Use a macro to define EP controller .align feature PCI: rockchip-ep: Fix address translation unit programming PCI/pwrctrl: Rename pwrctrl functions and structures PCI/pwrctrl: Rename pwrctl files to pwrctrl PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers PCI/pwrctl: Create pwrctl device only if at least one power supply is present PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices tools: PCI: Fix incorrect printf format specifiers ...
2024-11-20Merge tag 'asm-generic-3.13' of ↵Linus Torvalds7-8/+84
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "These are a number of unrelated cleanups, generally simplifying the architecture specific header files: - A series from Al Viro simplifies asm/vga.h, after it turns out that most of it can be generalized. - A series from Julian Vetter adds a common version of memcpy_{to,from}io() and memset_io() and changes most architectures to use that instead of their own implementation - A series from Niklas Schnelle concludes his work to make PC style inb()/outb() optional - Nicolas Pitre contributes improvements for the generic do_div() helper - Christoph Hellwig adds a generic version of page_to_phys() and phys_to_page(), replacing the slightly different architecture specific definitions. - Uwe Kleine-Koenig has a minor cleanup for ioctl definitions" * tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits) empty include/asm-generic/vga.h sparc: get rid of asm/vga.h asm/vga.h: don't bother with scr_mem{cpy,move}v() unless we need to vt_buffer.h: get rid of dead code in default scr_...() instances tty: serial: export serial_8250_warn_need_ioport lib/iomem_copy: fix kerneldoc format style hexagon: simplify asm/io.h for !HAS_IOPORT loongarch: Use new fallback IO memcpy/memset csky: Use new fallback IO memcpy/memset arm64: Use new fallback IO memcpy/memset New implementation for IO memcpy and IO memset watchdog: Add HAS_IOPORT dependency for SBC8360 and SBC7240 __arch_xprod64(): make __always_inline when optimizing for performance ARM: div64: improve __arch_xprod_64() asm-generic/div64: optimize/simplify __div64_const32() lib/math/test_div64: add some edge cases relevant to __div64_const32() asm-generic: add an optional pfn_valid check to page_to_phys asm-generic: provide generic page_to_phys and phys_to_page implementations asm-generic/io.h: Remove I/O port accessors for HAS_IOPORT=n tty: serial: handle HAS_IOPORT dependencies ...
2024-11-20Merge tag 'printk-for-6.13' of ↵Linus Torvalds1-0/+23
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Print more precise information about the printk log buffer memory usage. - Make sure that the sysrq title is shown on the console even when deferred. - Do not enable earlycon by `console=` which is meant to disable the default console. * tag 'printk-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: add dummy printk_force_console_enter/exit helpers tty: sysrq: Use printk_force_console context on __handle_sysrq printk: Introduce FORCE_CON flag printk: Improve memory usage logging during boot init: Don't proxy `console=` to earlycon
2024-11-19Merge tag 'irq-core-2024-11-18' of ↵Linus Torvalds6-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull interrupt subsystem updates from Thomas Gleixner: "Tree wide: - Make nr_irqs static to the core code and provide accessor functions to remove existing and prevent future aliasing problems with local variables or function arguments of the same name. Core code: - Prevent freeing an interrupt in the devres code which is not managed by devres in the first place. - Use seq_put_decimal_ull_width() for decimal values output in /proc/interrupts which increases performance significantly as it avoids parsing the format strings over and over. - Optimize raising the timer and hrtimer soft interrupts by using the 'set bit only' variants instead of the combined version which checks whether ksoftirqd should be woken up. The latter is a pointless exercise as both soft interrupts are raised in the context of the timer interrupt and therefore never wake up ksoftirqd. - Delegate timer/hrtimer soft interrupt processing to a dedicated thread on RT. Timer and hrtimer soft interrupts are always processed in ksoftirqd on RT enabled kernels. This can lead to high latencies when other soft interrupts are delegated to ksoftirqd as well. The separate thread allows to run them seperately under a RT scheduling policy to reduce the latency overhead. Drivers: - New drivers or extensions of existing drivers to support Renesas RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt chips - Support for multi-cluster GICs on MIPS. MIPS CPUs can come with multiple CPU clusters, where each CPU cluster has its own GIC (Generic Interrupt Controller). This requires to access the GIC of a remote cluster through a redirect register block. This is encapsulated into a set of helper functions to keep the complexity out of the actual code paths which handle the GIC details. - Support for encrypted guests in the ARM GICV3 ITS driver The ITS page needs to be shared with the hypervisor and therefore must be decrypted. - Small cleanups and fixes all over the place" * tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits) irqchip/riscv-aplic: Prevent crash when MSI domain is missing genirq/proc: Use seq_put_decimal_ull_width() for decimal values softirq: Use a dedicated thread for timer wakeups on PREEMPT_RT. timers: Use __raise_softirq_irqoff() to raise the softirq. hrtimer: Use __raise_softirq_irqoff() to raise the softirq riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers irqchip: Add T-HEAD C900 ACLINT SSWI driver dt-bindings: interrupt-controller: Add T-HEAD C900 ACLINT SSWI device irqchip/stm32mp-exti: Use of_property_present() for non-boolean properties irqchip/mips-gic: Fix selection of GENERIC_IRQ_EFFECTIVE_AFF_MASK irqchip/mips-gic: Prevent indirect access to clusters without CPU cores irqchip/mips-gic: Multi-cluster support irqchip/mips-gic: Setup defaults in each cluster irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic() irqchip/mips-gic: Replace open coded online CPU iterations genirq/irqdesc: Use str_enabled_disabled() helper in wakeup_show() genirq/devres: Don't free interrupt which is not managed by devres irqchip/gic-v3-its: Fix over allocation in itt_alloc_pool() irqchip/aspeed-intc: Add AST27XX INTC support dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC ...
2024-11-16serial: amba-pl011: fix build regressionArnd Bergmann1-0/+2
When CONFIG_DMA_ENGINE is disabled, the driver now fails to build: drivers/tty/serial/amba-pl011.c: In function 'pl011_unthrottle_rx': drivers/tty/serial/amba-pl011.c:1822:16: error: 'struct uart_amba_port' has no member named 'using_rx_dma' 1822 | if (uap->using_rx_dma) { | ^~ drivers/tty/serial/amba-pl011.c:1823:20: error: 'struct uart_amba_port' has no member named 'dmacr' 1823 | uap->dmacr |= UART011_RXDMAE; | ^~ drivers/tty/serial/amba-pl011.c:1824:32: error: 'struct uart_amba_port' has no member named 'dmacr' 1824 | pl011_write(uap->dmacr, uap, REG_DMACR); | ^~ Add the missing #ifdef check around these field accesses, matching what other parts of this driver do. Fixes: 2bcacc1c87ac ("serial: amba-pl011: Fix RX stall when DMA is used") Cc: stable <stable@kernel.org> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202411140617.nkjeHhsK-lkp@intel.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20241115110021.744332-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-13serial: sprd: Add support for sc9632Wenhua Lin1-5/+36
Due to the platform's new project uart ip upgrade, the new project's timeout interrupt needs to use bit17 while other projects' timeout interrupt needs to use bit13, using private data to adapt and be compatible with all projects. Signed-off-by: Wenhua Lin <Wenhua.Lin@unisoc.com> Link: https://lore.kernel.org/r/20241113110516.2166328-2-Wenhua.Lin@unisoc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-13tty/serial/altera_uart: unwrap error log stringTobias Klauser1-2/+2
The error log string should be a single line, unwrap it. Suggested-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/all/26034117-26b6-4eeb-bd66-969955b70e9b@kernel.org/ Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Link: https://lore.kernel.org/r/20241113114319.16636-1-tklauser@distanz.ch Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-13tty/serial/altera_jtaguart: unwrap error log stringTobias Klauser1-2/+2
The error log string should be a single line, unwrap it. Suggested-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/all/26034117-26b6-4eeb-bd66-969955b70e9b@kernel.org/ Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Link: https://lore.kernel.org/r/20241113114330.16995-1-tklauser@distanz.ch Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-13serial: amba-pl011: Fix RX stall when DMA is usedKartik Rajput1-0/+5
Function pl011_throttle_rx() calls pl011_stop_rx() to disable RX, which also disables the RX DMA by clearing the RXDMAE bit of the DMACR register. However, to properly unthrottle RX when DMA is used, the function pl011_unthrottle_rx() is expected to set the RXDMAE bit of the DMACR register, which it currently lacks. This causes RX to stall after the throttle API is called. Set RXDMAE bit in the DMACR register while unthrottling RX if RX DMA is used. Fixes: 211565b10099 ("serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle") Cc: stable@vger.kernel.org Signed-off-by: Kartik Rajput <kkartik@nvidia.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20241113092629.60226-1-kkartik@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-12serial: 8250_fintek: Add support for F81216EFilip Brozovic1-1/+13
The F81216E is a LPC/eSPI to 4 UART Super I/O and is mostly compatible with the F81216H, but does not support RS-485 auto-direction delays on any port. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20241110111703.15494-1-fbrozovic@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-07serial: sh-sci: Clean sci_ports[0] after at earlycon exitClaudiu Beznea1-0/+28
The early_console_setup() function initializes the sci_ports[0].port with an object of type struct uart_port obtained from the object of type struct earlycon_device received as argument by the early_console_setup(). It may happen that later, when the rest of the serial ports are probed, the serial port that was used as earlycon (e.g., port A) to be mapped to a different position in sci_ports[] and the slot 0 to be used by a different serial port (e.g., port B), as follows: sci_ports[0] = port A sci_ports[X] = port B In this case, the new port mapped at index zero will have associated data that was used for earlycon. In case this happens, after Linux boot, any access to the serial port that maps on sci_ports[0] (port A) will block the serial port that was used as earlycon (port B). To fix this, add early_console_exit() that clean the sci_ports[0] at earlycon exit time. Fixes: 0b0cced19ab1 ("serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support") Cc: stable@vger.kernel.org Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20241106120118.1719888-4-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-07tty: atmel_serial: Fix typo retreives to retrievesShivam Chaudhary1-1/+1
Fix typo 'retreives' to 'retrieves' in atmel_serial.c file. Signed-off-by: Shivam Chaudhary <cvam0000@gmail.com> Acked-by: Richard Genoud <richard.genoud@bootlin.com> Link: https://lore.kernel.org/r/20241106142720.41351-1-cvam0000@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-07tty: atmel_serial: Use devm_platform_ioremap_resource()Mihai Sain1-9/+3
Simplify the request port function by using a single call to devm_platform_ioremap_resource(). This will also enhance the printing from /proc/iomem: cat /proc/iomem | grep flexcom ; cat /proc/iomem | grep serial f0004000-f00041ff : f0004000.flexcom flexcom@f0004000 f8020000-f80201ff : f8020000.flexcom flexcom@f8020000 f0004200-f00043ff : f0004200.serial serial@200 f8020200-f80203ff : f8020200.serial serial@200 fffff200-fffff3ff : fffff200.serial serial@fffff200 Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Tested-by: Andrei Simion <andrei.simion@microchip.com> Reviewed-by: Hari Prasath Gujulan Elango <hari.prasathge@microchip.com> Link: https://lore.kernel.org/r/20241105131946.22449-1-mihai.sain@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-05serial: 8250: omap: Move pm_runtime_get_syncBin Liu1-2/+2
Currently in omap_8250_shutdown, the dma->rx_running flag is set to zero in omap_8250_rx_dma_flush. Next pm_runtime_get_sync is called, which is a runtime resume call stack which can re-set the flag. When the call omap_8250_shutdown returns, the flag is expected to be UN-SET, but this is not the case. This is causing issues the next time UART is re-opened and omap_8250_rx_dma is called. Fix by moving pm_runtime_get_sync before the omap_8250_rx_dma_flush. cc: stable@vger.kernel.org Fixes: 0e31c8d173ab ("tty: serial: 8250_omap: add custom DMA-RX callback") Signed-off-by: Bin Liu <b-liu@ti.com> [Judith: Add commit message] Signed-off-by: Judith Mendez <jm@ti.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20241031172315.453750-1-jm@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-04tty: serial: samsung: Add Exynos8895 compatibleIvaylo Ivanov1-0/+13
Add serial driver data for Exynos8895 SoC. The main difference from other platforms is that fifosize is only specified via the samsung,uart-fifosize DT property. Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20241023090902.538040-3-ivo.ivanov.ivanov1@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-04serial: 8250_dw: Add Sophgo SG2044 quirkInochi Amaoto1-2/+3
SG2044 relys on an internal divisor when calculating bitrate, which means a wrong clock for the most common bitrates. So add a quirk for this uart device to skip the set rate call and only relys on the internal UART divisor. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Inochi Amaoto <inochiama@gmail.com> Link: https://lore.kernel.org/r/20241024062105.782330-4-inochiama@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-04altera_jtaguart: Use dev_err() to report error attaching IRQTobias Klauser1-1/+1
In case of multiple Altera JTAG UART ports available on the system, the error message will contain information about the port for which attaching the IRQ handler failed. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20241029130307.5003-1-tklauser@distanz.ch Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-04altera_uart: Use dev_err() to report error attaching IRQ handlerTobias Klauser1-1/+1
In case of multiple Altera UART ports available on the system, the error message will contain information about the port for which attaching the IRQ handler failed. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20241029130258.4679-1-tklauser@distanz.ch Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-30serial: rp2: Replace deprecated PCI functionsPhilipp Stanner1-5/+7
pcim_iomap_table() and pcim_iomap_regions_request_all() have been deprecated by the PCI subsystem in commit e354bb84a4c1 ("PCI: Deprecate pcim_iomap_table(), pcim_iomap_regions_request_all()"). Replace these functions with their successors, pcim_iomap() and pcim_request_all_regions(). Link: https://lore.kernel.org/r/20241030112743.104395-9-pstanner@redhat.com Signed-off-by: Philipp Stanner <pstanner@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
2024-10-29tty: serial: export serial_8250_warn_need_ioportArnd Bergmann1-0/+1
The newly added function is used from a loadable module, so it has to be exported the same way as the other function in this file: ERROR: modpost: "serial_8250_warn_need_ioport" [drivers/tty/serial/8250/8250_pci.ko] undefined! Fixes: 7c7e6c8924e7 ("tty: serial: handle HAS_IOPORT dependencies") Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-10-28tty: serial: handle HAS_IOPORT dependenciesNiklas Schnelle7-8/+83
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at compile time. We thus need to add HAS_IOPORT as dependency for those drivers using them unconditionally. Some 8250 serial drivers support MMIO only use, so fence only the parts requiring I/O ports and print an error message if a device can't be supported with the current configuration. Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-10-21Merge 6.12-rc4 into tty-nextGreg Kroah-Hartman2-55/+63
We need the tty/serial fixes in here as well Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-16serial: ucc_uart: Switch to irq_get_nr_irqs()Bart Van Assche1-1/+1
Use the irq_get_nr_irqs() function instead of the global variable 'nr_irqs'. Prepare for changing 'nr_irqs' from an exported global variable into a variable with file scope. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20241015190953.1266194-18-bvanassche@acm.org
2024-10-16serial: cpm_uart: Switch to irq_get_nr_irqs()Bart Van Assche1-1/+1
Use the irq_get_nr_irqs() function instead of the global variable 'nr_irqs'. Prepare for changing 'nr_irqs' from an exported global variable into a variable with file scope. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20241015190953.1266194-17-bvanassche@acm.org
2024-10-16serial: amba-pl011: Switch to irq_get_nr_irqs()Bart Van Assche1-1/+1
Use the irq_get_nr_irqs() function instead of the global variable 'nr_irqs'. Prepare for changing 'nr_irqs' from an exported global variable into a variable with file scope. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20241015190953.1266194-16-bvanassche@acm.org
2024-10-16serial: amba-pl010: Switch to irq_get_nr_irqs()Bart Van Assche1-1/+1
Use the irq_get_nr_irqs() function instead of the global variable 'nr_irqs'. Prepare for changing 'nr_irqs' from an exported global variable into a variable with file scope. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20241015190953.1266194-15-bvanassche@acm.org
2024-10-16serial: 8250: Switch to irq_get_nr_irqs()Bart Van Assche1-1/+1
Use the irq_get_nr_irqs() function instead of the global variable 'nr_irqs'. Prepare for changing 'nr_irqs' from an exported global variable into a variable with file scope. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20241015190953.1266194-14-bvanassche@acm.org
2024-10-16serial: core: Switch to irq_get_nr_irqs()Bart Van Assche1-1/+1
Use the irq_get_nr_irqs() function instead of the global variable 'nr_irqs'. Prepare for changing 'nr_irqs' from an exported global variable into a variable with file scope. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20241015190953.1266194-13-bvanassche@acm.org
2024-10-11serial: 8250_exar: Remove old exar_ee_read() and other unneeded codeParker Newman1-90/+0
Remove the old exar_ee_read() and associated helper functions. Remove defines that are no longer needed after the switch to using the eeprom_93cx6 driver. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/ed756c48965a95ce3384ebb7fe2441b4928b4510.1727880931.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-11serial: 8250_exar: Replace custom EEPROM read with eeprom_93cx6Parker Newman2-13/+46
Replace the custom 93cx6 EEPROM read functions with the eeprom_93cx6 driver. This removes duplicate code and improves code readability. Replace exar_ee_read() calls with eeprom_93cx6_read() or eeprom_93cx6_multiread(). Add "select EEPROM_93CX6" to config SERIAL_8250_EXAR to ensure eeprom_93cx6 driver is also compiled when 8250_exar driver is selected. Note: Old exar_ee_read() and associated functions are removed in next patch in this series. Link to mailing list discussion with Andy Shevchenko for reference. Link: https://lore.kernel.org/linux-serial/Ztr5u2wEt8VF1IdI@black.fi.intel.com/ Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/1bf2214ae27130ca58b9e779c4d65a0e5db06fc1.1727880931.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-11serial: qcom-geni: rename suspend functionsJohan Hovold1-4/+3
Drop the unnecessary "_sys" infix from the suspend PM ops. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20241009145110.16847-10-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-11serial: qcom-geni: drop unused receive parameterJohan Hovold1-2/+2
Serial drivers should not be dropping characters themselves, but at least drop the unused 'drop' parameter from the receive handler for now. Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20241009145110.16847-9-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-11serial: qcom-geni: drop flip buffer WARN()Johan Hovold1-3/+2
Drop the unnecessary WARN() in case the TTY buffers are ever full in favour of a rate limited dev_err() which doesn't kill the machine when panic_on_warn is set. Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20241009145110.16847-8-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-11serial: qcom-geni: fix receiver enableJohan Hovold1-4/+6
The receiver is supposed to be enabled in the startup() callback and not in set_termios() which is called also during console setup. This specifically avoids accepting input before the port has been opened (and interrupts enabled), something which can also break the GENI firmware (cancel fails and after abort, the "stale" counter handling appears to be broken so that later input is not processed until twelve chars have been received). There also does not appear to be any need to keep the receiver disabled while updating the port settings. Since commit 6f3c3cafb115 ("serial: qcom-geni: disable interrupts during console writes") the calls to manipulate the secondary interrupts, which were done without holding the port lock, can also lead to the receiver being left disabled when set_termios() races with the console code (e.g. when init opens the tty during boot). This can manifest itself as a serial getty not accepting input. The calls to stop and start rx in set_termios() can similarly race with DMA completion and, for example, cause the DMA buffer to be unmapped twice or the mapping to be leaked. Fix this by only enabling the receiver during startup and while holding the port lock to avoid racing with the console code. Fixes: 6f3c3cafb115 ("serial: qcom-geni: disable interrupts during console writes") Fixes: 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA") Fixes: c4f528795d1a ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP") Cc: stable@vger.kernel.org # 6.3 Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20241009145110.16847-6-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-11serial: qcom-geni: fix dma rx cancellationJohan Hovold1-4/+14
Make sure to wait for the DMA transfer to complete when cancelling the rx command on stop_rx(). This specifically prevents the DMA completion interrupt from firing after rx has been restarted, something which can lead to an IOMMU fault and hosed rx when the interrupt handler unmaps the DMA buffer for the new command: qcom_geni_serial 988000.serial: serial engine reports 0 RX bytes in! arm-smmu 15000000.iommu: FSR = 00000402 [Format=2 TF], SID=0x563 arm-smmu 15000000.iommu: FSYNR0 = 00210013 [S1CBNDX=33 WNR PLVL=3] Bluetooth: hci0: command 0xfc00 tx timeout Bluetooth: hci0: Reading QCA version information failed (-110) Also add the missing state machine reset which is needed in case cancellation fails. Fixes: 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA") Cc: stable@vger.kernel.org # 6.3 Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20241009145110.16847-5-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-11serial: qcom-geni: fix shutdown raceJohan Hovold1-0/+2
A commit adding back the stopping of tx on port shutdown failed to add back the locking which had also been removed by commit e83766334f96 ("tty: serial: qcom_geni_serial: No need to stop tx/rx on UART shutdown"). Holding the port lock is needed to serialise against the console code, which may update the interrupt enable register and access the port state. Fixes: d8aca2f96813 ("tty: serial: qcom-geni-serial: stop operations in progress at shutdown") Fixes: 947cc4ecc06c ("serial: qcom-geni: fix soft lockup on sw flow control and suspend") Cc: stable@vger.kernel.org # 6.3 Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20241009145110.16847-4-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-11serial: qcom-geni: revert broken hibernation supportJohan Hovold1-39/+2
This reverts commit 35781d8356a2eecaa6074ceeb80ee22e252fcdae. Hibernation is not supported on Qualcomm platforms with mainline kernels yet a broken vendor implementation for the GENI serial driver made it upstream. This is effectively dead code that cannot be tested and should just be removed, but if these paths were ever hit for an open non-console port they would crash the machine as the driver would fail to enable clocks during restore() (i.e. all ports would have to be closed by drivers and user space before hibernating the system to avoid this as a comment in the code hinted at). The broken implementation also added a random call to enable the receiver in the port setup code where it does not belong and which enables the receiver prematurely for console ports. Fixes: 35781d8356a2 ("tty: serial: qcom-geni-serial: Add support for Hibernation feature") Cc: stable@vger.kernel.org # 6.2 Cc: Aniket Randive <quic_arandive@quicinc.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20241009145110.16847-3-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-11serial: qcom-geni: fix polled console initialisationJohan Hovold1-1/+19
The polled console (KGDB/KDB) implementation must not call port setup unconditionally as the port may already be in use by the console or a getty. Only make sure that the receiver is enabled, but do not enable any device interrupts. Fixes: d8851a96ba25 ("tty: serial: qcom-geni-serial: Add a poll_init() function") Cc: stable@vger.kernel.org # 6.4 Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20241009145110.16847-2-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-11serial: imx: Update mctrl old_status on RTSD interruptMarek Vasut1-0/+15
When sending data using DMA at high baudrate (4 Mbdps in local test case) to a device with small RX buffer which keeps asserting RTS after every received byte, it is possible that the iMX UART driver would not recognize the falling edge of RTS input signal and get stuck, unable to transmit any more data. This condition happens when the following sequence of events occur: - imx_uart_mctrl_check() is called at some point and takes a snapshot of UART control signal status into sport->old_status using imx_uart_get_hwmctrl(). The RTSS/TIOCM_CTS bit is of interest here (*). - DMA transfer occurs, the remote device asserts RTS signal after each byte. The i.MX UART driver recognizes each such RTS signal change, raises an interrupt with USR1 register RTSD bit set, which leads to invocation of __imx_uart_rtsint(), which calls uart_handle_cts_change(). - If the RTS signal is deasserted, uart_handle_cts_change() clears port->hw_stopped and unblocks the port for further data transfers. - If the RTS is asserted, uart_handle_cts_change() sets port->hw_stopped and blocks the port for further data transfers. This may occur as the last interrupt of a transfer, which means port->hw_stopped remains set and the port remains blocked (**). - Any further data transfer attempts will trigger imx_uart_mctrl_check(), which will read current status of UART control signals by calling imx_uart_get_hwmctrl() (***) and compare it with sport->old_status . - If current status differs from sport->old_status for RTS signal, uart_handle_cts_change() is called and possibly unblocks the port by clearing port->hw_stopped . - If current status does not differ from sport->old_status for RTS signal, no action occurs. This may occur in case prior snapshot (*) was taken before any transfer so the RTS is deasserted, current snapshot (***) was taken after a transfer and therefore RTS is deasserted again, which means current status and sport->old_status are identical. In case (**) triggered when RTS got asserted, and made port->hw_stopped set, the port->hw_stopped will remain set because no change on RTS line is recognized by this driver and uart_handle_cts_change() is not called from here to unblock the port->hw_stopped. Update sport->old_status in __imx_uart_rtsint() accordingly to make imx_uart_mctrl_check() detect such RTS change. Note that TIOCM_CAR and TIOCM_RI bits in sport->old_status do not suffer from this problem. Fixes: ceca629e0b48 ("[ARM] 2971/1: i.MX uart handle rts irq") Cc: stable <stable@kernel.org> Reviewed-by: Esben Haabendal <esben@geanix.com> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20241002184133.19427-1-marex@denx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-11serial: imx: Switch to nbcon consoleEsben Haabendal1-19/+101
Implements the necessary callbacks to switch the imx console driver to perform as an nbcon console. Add implementations for the nbcon consoles (write_atomic, write_thread, driver_enter, driver_exit) and add CON_NBCON to the initial flags. The legacy code is kept in order to easily switch back to legacy mode by defining CONFIG_SERIAL_IMX_LEGACY_CONSOLE. Signed-off-by: Esben Haabendal <esben@geanix.com> Link: https://lore.kernel.org/r/20240913-serial-imx-nbcon-v3-1-4c627302335b@geanix.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-11tty: serial: fsl_lpuart: add 7-bits format support on imx7ulp/imx8ulp/imx8qxpLuke Wang1-5/+16
imx7ulp/imx8ulp/imx8qxp lpuart IP support 7-bits format and have no limitation on parity when CS7. Remove this limitation and add 7-bits format support on imx7ulp/imx8ulp/imx8qxp. Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com> Link: https://lore.kernel.org/r/20241008094418.439706-1-ziniu.wang_1@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-11serial: sc16is7xx: announce support for SER_RS485_RTS_ON_SENDHugo Villeneuve1-1/+1
When specifying flag SER_RS485_RTS_ON_SEND in RS485 configuration, we get the following warning after commit 4afeced55baa ("serial: core: fix sanitizing check for RTS settings"): invalid RTS setting, using RTS_AFTER_SEND instead This results in SER_RS485_RTS_AFTER_SEND being set and the driver always write to the register field SC16IS7XX_EFCR_RTS_INVERT_BIT, which breaks some hardware using these chips. The hardware supports both RTS_ON_SEND and RTS_AFTER_SEND modes, so fix this by announcing support for RTS_ON_SEND. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Suggested-by: Konstantin Pugin <ria.freelander@gmail.com> Link: https://lore.kernel.org/lkml/20240422133219.2710061-2-ria.freelander@gmail.com Reviewed-by: Andy Shevchenko <andy@kernel.org> Tested-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20241007162716.3122912-1-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-11serial: 8250: Fix typos in comments across various filesYu Jiaoliang5-8/+8
This patch fixes several typos in the comments within the tty/8250 directory to improve readability and code documentation. Detected using codespell. Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20240929100931.530620-1-yujiaoliang@vivo.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-11serial: 8250_exar: Group CTI EEPROM offsets by deviceAndy Shevchenko1-2/+4
It's not obvious from the first glance that the list of the CTI EEPROM offsets covers three different models, let's group them accordingly for better readability. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240920154430.3323820-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-11serial: imx: Add more comments on port lock statusEsben Haabendal1-0/+10
Comments regarding status of port.lock on internal functions is useful when reviewing correct handling of registers that must be protected by this lock. Signed-off-by: Esben Haabendal <esben@geanix.com> Link: https://lore.kernel.org/r/20240913-serial-imx-lockfix-v1-2-4d102746c89d@geanix.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-11serial: imx: Grab port lock in imx_uart_enable_wakeup()Esben Haabendal1-0/+5
The port lock needs to be held when doing read-modify-write on UCR1 and UCR3. Signed-off-by: Esben Haabendal <esben@geanix.com> Link: https://lore.kernel.org/r/20240913-serial-imx-lockfix-v1-1-4d102746c89d@geanix.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 07:01:12 +0000