summaryrefslogtreecommitdiff
path: root/drivers/scsi/fnic/fnic.h
AgeCommit message (Collapse)AuthorFilesLines
2024-02-12scsi: fnic: Move fnic_fnic_flush_tx() to a work queueLee Duncan1-1/+2
Rather than call 'fnic_flush_tx()' from interrupt context we should be moving it onto a work queue to avoid any locking issues. Fixes: 1a1975551943 ("scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock") Co-developed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Lee Duncan <lduncan@suse.com> Link: https://lore.kernel.org/r/ce5ffa5d0ff82c2b2e283b3b4bff23291d49b05c.1707500786.git.lduncan@suse.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: fnic: Increment driver versionKaran Tilak Kumar1-1/+1
Increment driver version for multiqueue (MQ). Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20231211173617.932990-14-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: fnic: Improve logs and add support for multiqueue (MQ)Karan Tilak Kumar1-2/+4
Improve existing logs by adding fnic number, hardware queue, tag, and mqtag in the prints. Add logs with the above elements for effective debugging. Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Tested-by: Karan Tilak Kumar <kartilak@cisco.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20231211173617.932990-13-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: fnic: Add support for multiqueue (MQ) in fnic driverKaran Tilak Kumar1-2/+0
Implement support for MQ in fnic driver: The block multiqueue layer issues IO to the fnic driver with an MQ tag. Use the mqtag and derive a tag from it. Derive the hardware queue from the mqtag and use it in all paths. Modify queuecommand to handle mqtag. Replace wq and cq indices to support MQ. Replace the zeroth queue with a hardware queue. Implement spin locks on a per hardware queue basis. Replace io_lock with per hardware queue spinlock. Implement out of range tag checks. Allocate an io_req_table to track status of the io_req. Test the driver by building it, loading it, and configuring 64 queues in UCSM. Issue IOs using Medusa on multiple fnics. Enable/disable links to exercise the abort and clean up path. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310300032.2awCqkfn-lkp@intel.com/ Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Tested-by: Karan Tilak Kumar <kartilak@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20231211173617.932990-12-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: fnic: Add support for multiqueue (MQ) in fnic_main.cKaran Tilak Kumar1-2/+2
Set map_queues in the fnic_host_template to fnic_mq_map_queues_cpus. Define fnic_mq_map_queues_cpus to set cpu assignment to fnic queues. Refactor code in fnic_probe to enable vnic queues before scsi_add_host. Modify notify set to the correct index. Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20231211173617.932990-11-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: fnic: Modify ISRs to support multiqueue (MQ)Karan Tilak Kumar1-3/+6
Modify interrupt service routines for INTx, MSI, and MSI-x to support multiqueue. Modify parameter list of fnic_wq_copy_cmpl_handler to take cq_index. Modify fnic_cleanup function to use the new function call of fnic_wq_copy_cmpl_handler. Refactor code to set interrupt mode to MSI-x to a new function. Add a new stat for intx_dummy. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310251847.4T8BVZAZ-lkp@intel.com/ Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20231211173617.932990-8-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: fnic: Refactor and redefine fnic.h for multiqueueKaran Tilak Kumar1-8/+22
Refactor and re-define values in fnic.h to implement multiqueue (MQ) functionality. VIC firmware allows fnic to create up to 64 copy workqueues. Update the copy workqueue max to 64. Modify the interrupt index to be in sync with the firmware to support MQ. Add irq number to the MSIX entry. Define a software workqueue table to track the status of io_reqs. Define a base for the copy workqueue. Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20231211173617.932990-7-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: fnic: Rename wq_copy to hw_copy_wqKaran Tilak Kumar1-1/+1
Rename wq_copy to hw_copy_wq to accurately describe the copy workqueue. This will also help distinguish this data structure from software data structures that can be introduced. Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20231211173617.932990-5-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: fnic: Add and improve log messagesKaran Tilak Kumar1-4/+8
Add link related log messages in fnic_fcs.c, Improve log message in fnic_fcs.c, Add log message in vnic_dev.c. Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20231211173617.932990-4-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: fnic: Add and use fnic numberKaran Tilak Kumar1-0/+1
Add fnic_num in fnic.h to identify fnic in a multi-fnic environment. Increment and set the fnic number during driver load in fnic_probe. Replace the host number with fnic number in debugfs. Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20231211173617.932990-3-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-27scsi: fnic: Fix sg_reset success pathKaran Tilak Kumar1-1/+3
sg_reset performs a target or LUN reset. Since the command is issued by the user, it does not come into the driver with a tag or a queue id. Fix the fnic driver to create an io_req and use a SCSI command tag. Fix the ITMF path to special case the sg_reset response. Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Tested-by: Karan Tilak Kumar <kartilak@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20230919182436.6895-1-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-08-25scsi: fnic: Replace sgreset tag with max_tag_idKaran Tilak Kumar1-1/+2
sgreset is issued with a SCSI command pointer. The device reset code assumes that it was issued on a hardware queue, and calls block multiqueue layer. However, the assumption is broken, and there is no hardware queue associated with the sgreset, and this leads to a crash due to a null pointer exception. Fix the code to use the max_tag_id as a tag which does not overlap with the other tags issued by mid layer. Tested by running FC traffic for a few minutes, and by issuing sgreset on the device in parallel. Without the fix, the crash is observed right away. With this fix, no crash is observed. Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Tested-by: Karan Tilak Kumar <kartilak@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20230817182146.229059-1-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-10treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE ↵Thomas Gleixner1-13/+1
(part 1) Based on the normalized pattern: this program is free software you may redistribute it and/or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license the software is provided as is without warranty of any kind express or implied including but not limited to the warranties of merchantability fitness for a particular purpose and noninfringement in no event shall the authors or copyright holders be liable for any claim damages or other liability whether in an action of contract tort or otherwise arising from out of or in connection with the software or the use or other dealings in the software extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19scsi: fnic: Replace DMA mask of 64 bits with 47 bitsKaran Tilak Kumar1-1/+1
Cisco VIC supports only 47 bits. If the host sends DMA addresses that are greater than 47 bits, it causes work queue (WQ) errors in the VIC. Link: https://lore.kernel.org/r/20220513205605.81788-1-kartilak@cisco.com Tested-by: Karan Tilak Kumar <kartilak@cisco.com> Co-developed-by: Dhanraj Jhawar <djhawar@cisco.com> Signed-off-by: Dhanraj Jhawar <djhawar@cisco.com> Co-developed-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: fnic: Stop using the SCSI pointerBart Van Assche1-7/+20
Set .cmd_size in the SCSI host template instead of using the SCSI pointer from struct scsi_cmnd. This patch prepares for removal of the SCSI pointer from struct scsi_cmnd. Link: https://lore.kernel.org/r/20220218195117.25689-23-bvanassche@acm.org Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-16scsi: fnic: Switch to attribute groupsBart Van Assche1-1/+1
struct device supports attribute groups directly but does not support struct device_attribute directly. Hence switch to attribute groups. Link: https://lore.kernel.org/r/20211012233558.4066756-20-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-23scsi: fnic: Validate io_req before othersKaran Tilak Kumar1-1/+1
We need to check for a valid io_req before we check other data. Also, remove redundant checks. Link: https://lore.kernel.org/r/20201121023337.19295-1-kartilak@cisco.com Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Co-developed-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-23scsi: fnic: Set scsi_set_resid() only for underflowKaran Tilak Kumar1-1/+1
Set scsi_set_resid() only if FCPIO_ICMND_CMPL_RESID_UNDER is set. Link: https://lore.kernel.org/r/20201121015134.18872-1-kartilak@cisco.com Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Co-developed-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-23scsi: fnic: Change shost_printk() to FNIC_MAIN_DBG()Karan Tilak Kumar1-1/+1
Replace shost_printk() with FNIC_MAIN_DBG() so that these log messages are controlled by fnic_log_level flag in fnic_handle_link. Link: https://lore.kernel.org/r/20201121013739.18701-1-kartilak@cisco.com Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Co-developed-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-23scsi: fnic: Avoid looping in TRANS ETH on unloadKaran Tilak Kumar1-1/+2
Avoid looping in fnic_scsi_abort_io() before sending fw reset when fnic is in TRANS ETH state and when we have not received any link events. Link: https://lore.kernel.org/r/20201121012145.18522-1-kartilak@cisco.com Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Co-developed-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-23scsi: fnic: Change shost_printk() to FNIC_FCS_DBG()Karan Tilak Kumar1-1/+1
Replacing shost_printk with FNIC_FCS_DBG() so that these log messages are controlled by fnic_log_level flag in fnic_fip_handler_timer. Bumping up version number from 47 to 49 to maintain same level as internal version. Link: https://lore.kernel.org/r/20201120220712.16708-1-kartilak@cisco.com Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Co-developed-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22scsi: fnic: Update fnic driver version to 1.6.0.47Satish Kharat1-1/+1
Update fnic driver to version 1.6.0.47. Signed-off-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22scsi: fnic: Impose upper limit on max. # of CQs processed per intrSatish Kharat1-0/+2
Impose an upper limit on the max number of CQ entries (corresponding to the copy wq) processed in an interrupt. Use module parameter to set the limit. Signed-off-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22scsi: fnic: change fnic queue depth to 256Satish Kharat1-1/+1
This patch changes the default lun queuedepth for fnic to 256. Signed-off-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-07scsi: fnic: fix format string overflow warningArnd Bergmann1-1/+1
The MSI interrupt name can require 11 bytes in addition to the device name, for a total of 23 bytes: drivers/scsi/fnic/fnic_isr.c: In function 'fnic_request_intr': drivers/scsi/fnic/fnic_isr.c:192:4: error: '-fcs-rq' directive writing 7 bytes into a region of size between 5 and 16 [-Werror=format-overflow=] "%.11s-fcs-rq", fnic->name); drivers/scsi/fnic/fnic_isr.c:206:3: note: 'sprintf' output between 12 and 23 bytes into a destination of size 16 sprintf(fnic->msix[FNIC_MSIX_ERR_NOTIFY].devname, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "%.11s-err-notify", fnic->name); This extends the buffer to fit any possible value. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-23scsi: fnic: Adding debug IO and Abort latency counter to fnic statsSatish Kharat1-1/+1
The IO and Abort latency counter counts the time taken to complete the IO and abort command into broad buckets. This is not intended for performance measurement, just a debug statistic. current_max_io_time tries to keep track of the maximum time an IO has taken to complete if it is > 30sec. Signed-off-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-23scsi: fnic: switch to pci_alloc_irq_vectorsChristoph Hellwig1-1/+0
Not a full cleanup for the IRQ code, for that we'd need to know if the max number of the various CQ types is going to stay 1 forever. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-05scsi: fnic: Avoid sending reset to firmware when another reset is in progressSatish Kharat1-0/+1
This fix is to avoid calling fnic_fw_reset_handler through fnic_host_reset when a finc reset is alreay in progress. Signed-off-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-11fnic: Using rport->dd_data to check rport online instead of rport_lookup.Satish Kharat1-1/+1
When issuing I/O we check if rport is online through libfc rport_lookup() function which needs to be protected by mutex lock that cannot acquired in I/O context. The change is to use midlayer remote port s dd_data which is preserved until its devloss timeout and no protection is required. The the scsi_cmnd error code is expected to be in the left 16 bits of the result field. Changed to correct this. Fnic driver version changed from 1.6.0.20 to 1.6.0.21 Signed-off-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-11fnic: Cleanup the I/O pending with fw and has timed out and is used to issue ↵Satish Kharat1-1/+1
LUN reset In case of LUN reset, the device reset command is issued with one of the I/Os that has timed out on that LUN. The change is to also return this I/O with error status set to DID_RESET. In case when the reset is issued using the sg_reset tool (from sg3_utils) it is a new command and new_sc is set to 1. Fnic driver version changed from 1.6.0.19 to 1.6.0.20 [mkp: Fixed checkpatch warning] Signed-off-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-11fnic: Fix to cleanup aborted IO to avoid device being offlined by mid-layerSatish Kharat1-1/+1
If an I/O times out and an abort issued by host, if the abort is successful we need to set scsi status as DID_ABORT. Or else the mid-layer error handler which looks for this error code, will offline the device. Also if the original I/O is not found in fnic firmware, we will consider the abort as successful. The start_time assignment is moved because of the new goto. Fnic driver version changed from 1.6.0.17a to 1.6.0.19, version 1.6.0.18 has been skipped [mkp: Fixed checkpatch warning] Signed-off-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-18fnic: Use the local variable instead of I/O flag to acquire io_req_lock in ↵Hiral Shah1-1/+1
fnic_queuecommand() to avoid deadloack We added changes in fnic driver patch 1.6.0.16 to acquire io_req_lock in fnic_queuecommand() before issuing I/O so that io completion is serialized. But when releasing the lock we check for the I/O flag and this could be modified if IO abort occurs before I/O completion. In this case we wont release the lock and causes deadlock in some scenerios. Using the local variable to check the IO lock status will resolve the problem. Fixes: 41df7b02db82cf6c14f094757bac3830d10a827f Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Anil Chintalapati <achintal@cisco.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Odin.com>
2014-12-30fnic: IOMMU Fault occurs when IO and abort IO is out of orderAnil Chintalapati (achintal)1-1/+1
When I/O is aborted by mid-layer, fnic FW will complete the I/O before completing the abort task. In some cases abort request is completed before the I/O, which could lead to inconsistent driver and firmware states. In this case firmware reset would clear the inconsistent state. Signed-off-by: Anil Chintalapati <achintal@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-20Fnic: Fnic Driver crashed with NULL pointer referenceHiral Shah1-1/+1
When issuing I/O request, if the I/O completes before returning from fnic_queuecommand(), we may be referencing scsi_cmnd structure that may be freed by interrupt handler. Acquring IO lock would synchronize fnic_queuecommand and interrupt handler. - Increment fnic version from 1.6.0.15 to 1.6.0.16 Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Anil Chintalapati <achintal@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-20Fnic: For Standalone C series, "sending VLAN request" message seen even if ↵Hiral Shah1-1/+1
the link is down When physical link between standalone C series and switch is down, the fip timer is not turned off and timer expiration will keep sending vlan request. It can be fixed by stopping the fip_timer and it will be restarted automatically when Link is up. - Increment fnic version from 1.6.0.14 to 1.6.0.15 Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Anil Chintalapati <achintal@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-20Fnic: Improper resue of exchange IdsHiral Shah1-1/+1
IOs belonging to an rport are aborted with Internal terminate option when rport goes offline. Any new IO issued to the rport during this time can reuse the terminated exchange which will cause inconsistent state of the exchange between local port and remote port. fc_rport_priv is set to RPORT_ST_DELETE before exchanges are aborted by libfc. Not issuing amy more I/O requests when RPORT_ST_DELETE is set, will avoid inconsistent state of the exchange between local port and remote port. - Increment fnic version from 1.6.0.13 to 1.6.0.14 Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Anil Chintalapati <achintal@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-20Fnic: Memcopy only mimumum of data or trace bufferHiral Shah1-1/+1
In case of receive path, we do not have eth header or fcoe header available when we take a trace so we fill the fc trace buffer with 0xff for both values. We copy only mimimum of received data or trace buffer size - fc header - eth and fcoe header - Increment fnic version from 1.6.0.12 to 1.6.0.13 Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Anil Chintalapati <achintal@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-20Fnic: Not probing all the vNICS via fnic_probe on bootHiral Shah1-1/+1
In fnic_dev_wait, Wait for finish to complete at least three times in two seconds while loop before returning -ETIMEDOUT as sometime schedule_timeout_uninterruptible takes more than two seconds to wake up. - Increment fnic version from 1.6.0.11 to 1.6.0.12 Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Anil Chintalapati <achintal@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-16fnic: assign FIP_ALL_FCF_MACS to fcoe_all_fcfsHiral Shah1-1/+1
1) Assgning FIP_ALL_FCF_MACS to fcoe_all_fcfs allows VLAN request to be sent to correct Mac address for VLAN Discovery otherwise VLAN request will be sent to invalid address hence FLOGI never happens. 2) Simplify the copy_and_format_trace_data code and log the correct Link event for fnic control path tracing in case of link status UP->UP. 3) Increment Fnic driver version Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19fnic: fnic Control Path Trace UtilityHiral Shah1-1/+1
Fnic Ctlr Path Trace utility is a tracing functionality built directly into fnic driver to trace the control path frames like discovery, FLOGI request/reply, PLOGI request/reply, link event etc. It will be one trace file for all fnics. It will help us to debug and resolve the discovery and initialization related issues in more convenient way. This trace information includes time stamp, Host Number, Frame type, Frame Length and Frame. By default,64 pages are allocated but we can change the number of allocated pages by module parameter fnic_fc_trace_max_page. Each entry is of 256 byte and available entries are depends on allocated number of pages. We can turn on or off the fnic control path trace functionality by module paramter fc_trace_enable and/or reset the trace contain by module paramter fc_trace_clear. Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19fnic: NoFIP solicitation frame in NONFIP mode and changed IO Throttle countHiral Shah1-1/+2
This patch contains following three minor fixes. 1) During Probe, fnic was sending FIP solicitation in Non FIP mode which is not expected, setting the internal fip state to Non FIP mode explicitly, avoids sending FIP frame. 2) When target goes offline, all outstanding IOs belong to the target will be terminated by driver, If the termination count is high, then it influences firmware responsiveness. To improve the responsiveness, default IO throttle count is reduced to 256. 3) Accessing Virtual Fabric Id (vfid) and fc_map of Fibre-Channel Forwarder(FCF) is invalid in fnic driver when Clear Virtual Link(CVL) is received prior to receiving flogi reject from switch. As CVL clears all FCFs. Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Narsimhulu Musini <nmusini@cisco.com> Signed-off-by: Anantha Tungarakodi <atungara@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2013-10-25[SCSI] fnic: Incremented driver versionHiral Patel1-1/+1
Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] fnic: Fnic Statistics CollectionHiral Patel1-0/+8
This feature gathers active and cumulative per fnic stats for io, abort, terminate, reset, vlan discovery path and it also includes various important stats for debugging issues. It also provided debugfs and ioctl interface for user to retrieve these stats. It also provides functionality to reset cumulative stats through user interface. Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-11[SCSI] fnic: fnic Driver Tuneables Exposed through CLIHiral Patel1-0/+3
Introduced module params to provide dynamic way of configuring queue depth. Added support to get max io throttle count through UCSM to configure maximum outstanding IOs supported by fnic and push that value to scsi mid-layer. Supported IO throttle values: UCSM IO THROTTLE VALUE FNIC MAX OUTSTANDING IOS ------------------------------------------------------ 16 (Default) 2048 <= 256 256 > 256 <ucsm value> Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-11[SCSI] fnic: FC stat param seconds_since_last_reset not getting updatedNarsimhulu Musini1-0/+5
Code to reset fc_host statistics. echo 1 > /sys/class/fc_host/hostX/statistics/reset_statistics clears fc_host stats, the code also issues command to fnic firmware to clear vnic stats. Signed-off-by: Narsimhulu Musini <nmusini@cisco.com> Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-02[SCSI] fnic: BUG: sleeping function called from invalid context during probeChris Leech1-1/+1
I hit this during driver probe with the latest fnic updates (this trace is from a backport into a distro kernel, but the issue is the same). > BUG: sleeping function called from invalid context at mm/slab.c:3113 > in_atomic(): 0, irqs_disabled(): 1, pid: 610, name: work_for_cpu > INFO: lockdep is turned off. > irq event stamp: 0 > hardirqs last enabled at (0): [<(null)>] (null) > hardirqs last disabled at (0): [<ffffffff81070aa5>] > copy_process+0x5e5/0x1670 > softirqs last enabled at (0): [<ffffffff81070aa5>] > copy_process+0x5e5/0x1670 > softirqs last disabled at (0): [<(null)>] (null) > Pid: 610, comm: work_for_cpu Not tainted > Call Trace: > [<ffffffff810b2d10>] ? print_irqtrace_events+0xd0/0xe0 > [<ffffffff8105c1a7>] ? __might_sleep+0xf7/0x130 > [<ffffffff81184efb>] ? kmem_cache_alloc_trace+0x20b/0x2d0 > [<ffffffff8109709e>] ? __create_workqueue_key+0x3e/0x1d0 > [<ffffffff8109709e>] ? __create_workqueue_key+0x3e/0x1d0 > [<ffffffffa00c101c>] ? fnic_probe+0x977/0x11aa [fnic] > [<ffffffffa00c1048>] ? fnic_probe+0x9a3/0x11aa [fnic] > [<ffffffff81096f00>] ? do_work_for_cpu+0x0/0x30 > [<ffffffff812c6da7>] ? local_pci_probe+0x17/0x20 > [<ffffffff81096f18>] ? do_work_for_cpu+0x18/0x30 > [<ffffffff8109cdc6>] ? kthread+0x96/0xa0 > [<ffffffff8100c1ca>] ? child_rip+0xa/0x20 > [<ffffffff81550f80>] ? _spin_unlock_irq+0x30/0x40 > [<ffffffff8100bb10>] ? restore_args+0x0/0x30 > [<ffffffff8109cd30>] ? kthread+0x0/0xa0 > [<ffffffff8100c1c0>] ? child_rip+0x0/0x20 The problem is in this hunk of "FIP VLAN Discovery Feature Support" (d3c995f1dcf938f1084388d92b8fb97bec366566) create_singlethreaded_workqueue cannot be called with irqs disabled @@ -620,7 +634,29 @@ static int __devinit fnic_probe(struct pci_dev *pdev, vnic_dev_packet_filter(fnic->vdev, 1, 1, 0, 0, 0); vnic_dev_add_addr(fnic->vdev, FIP_ALL_ENODE_MACS); vnic_dev_add_addr(fnic->vdev, fnic->ctlr.ctl_src_addr); + fnic->set_vlan = fnic_set_vlan; fcoe_ctlr_init(&fnic->ctlr, FIP_MODE_AUTO); + setup_timer(&fnic->fip_timer, fnic_fip_notify_timer, + (unsigned long)fnic); + spin_lock_init(&fnic->vlans_lock); + INIT_WORK(&fnic->fip_frame_work, fnic_handle_fip_frame); + INIT_WORK(&fnic->event_work, fnic_handle_event); + skb_queue_head_init(&fnic->fip_frame_queue); + spin_lock_irqsave(&fnic_list_lock, flags); + if (!fnic_fip_queue) { + fnic_fip_queue = + create_singlethread_workqueue("fnic_fip_q"); + if (!fnic_fip_queue) { + spin_unlock_irqrestore(&fnic_list_lock, flags); + printk(KERN_ERR PFX "fnic FIP work queue " + "create failed\n"); + err = -ENOMEM; + goto err_out_free_max_pool; + } + } + spin_unlock_irqrestore(&fnic_list_lock, flags); + INIT_LIST_HEAD(&fnic->evlist); + INIT_LIST_HEAD(&fnic->vlans); } else { shost_printk(KERN_INFO, fnic->lport->host, "firmware uses non-FIP mode\n"); The attempts to make fnic_fip_queue a single instance for the driver while it's being created in probe look awkward anyway, why is this not created in fnic_init_module like the event workqueue? Signed-off-by: Chris Leech <cleech@redhat.com> Tested-by: Anantha Tungarakodi <atungara@cisco.com> Acked-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] fnic: Incremented driver versionHiral Patel1-1/+1
Signed-off-by: Brian Uchino <buchino@cisco.com> Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] fnic: FIP VLAN Discovery Feature SupportHiral Patel1-0/+32
FIP VLAN discovery discovers the FCoE VLAN that will be used by all other FIP protocols as well as by the FCoE encapsulation for Fibre Channel payloads on the established virtual link. One of the goals of FC-BB-5 was to be as nonintrusive as possible on initiators and targets, and therefore FIP VLAN discovery occurs in the native VLAN used by the initiator or target to exchange Ethernet traffic. The FIP VLAN discovery protocol is the only FIP protocol running on the native VLAN; all other FIP protocols run on the discovered FCoE VLANs. If an administrator has manually configured FCoE VLANs on ENodes and FCFs, there is no need to use this protocol. FIP and FCoE will run over the configured VLANs. An ENode without FCoE VLANs configuration would use this automated discovery protocol to discover over which VLANs FCoE is running. The ENode sends a FIP VLAN discovery request to a multicast MAC address called All-FCF-MACs, which is a multicast MAC address to which all FCFs listen. All FCFs that can be reached in the native VLAN of the ENode are expected to respond on the same VLAN with a response that lists one or more FCoE VLANs that are available for the ENode's VN_Port login. This protocol has the sole purpose of allowing the ENode to discover all the available FCoE VLANs. Now the ENode may enable a subset of these VLANs for FCoE Running the FIP protocol in these VLANs on a per VLAN basis. And FCoE data transactions also would occur on this VLAN. Hence, Except for FIP VLAN discovery, all other FIP and FCoE traffic runs on the selected FCoE VLAN. Its only the FIP VLAN Discovery protocol that is permitted to run on the Default native VLAN of the system. [**** NOTE ****] We are working on moving this feature definitions and functionality to libfcoe module. We need this patch to be approved, as Suse is looking forward to merge this feature in SLES 11 SP3 release. Once this patch is approved, we will submit patch which should move vlan discovery feature to libfoce. [Fengguang Wu <fengguang.wu@intel.com>: kmalloc cast removal] Signed-off-by: Anantha Prakash T <atungara@cisco.com> Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] fnic: Fnic Trace UtilityHiral Patel1-0/+1
Fnic Trace utility is a tracing functionality built directly into fnic driver to trace events. The benefit that trace buffer brings to fnic driver is the ability to see what it happening inside the fnic driver. It also provides the capability to trace every IO event inside fnic driver to debug panics, hangs and potentially IO corruption issues. This feature makes it easy to find problems in fnic driver and it also helps in tracking down strange bugs in a more manageable way. Trace buffer is shared across all fnic instances for this implementation. Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] fnic: New debug flags and debug log messagesHiral Patel1-8/+23
Added new fnic debug flags for identifying IO state at every stage of IO while debugging and also added more log messages for better debugging capability. Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 07:21:21 +0000