summaryrefslogtreecommitdiff
path: root/drivers/s390/char
AgeCommit message (Collapse)AuthorFilesLines
3 daystreewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner6-13/+13
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-03-18s390: Use inline qualifier for all EX_TABLE and ALTERNATIVE inline assembliesHeiko Carstens2-2/+2
Use asm_inline for all inline assemblies which make use of the EX_TABLE or ALTERNATIVE macros. These macros expand to many lines and the compiler assumes the number of lines within an inline assembly is the same as the number of instructions within an inline assembly. This has an effect on inlining and loop unrolling decisions. In order to avoid incorrect assumptions use asm_inline, which tells the compiler that an inline assembly has the smallest possible size. In order to avoid confusion when asm_inline should be used or not, since a couple of inline assemblies are quite large: the rule is to always use asm_inline whenever the EX_TABLE or ALTERNATIVE macro is used. In specific cases there may be reasons to not follow this guideline, but that should be documented with the corresponding code. Using the inline qualifier everywhere has only a small effect on the kernel image size: add/remove: 0/10 grow/shrink: 19/8 up/down: 1492/-1858 (-366) The only location where this seems to matter is load_unaligned_zeropad() from word-at-a-time.h where the compiler inlines more functions within the dcache code, which is indeed code where performance matters. Suggested-by: Juergen Christ <jchrist@linux.ibm.com> Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-03-04s390/tty: Fix a potential memory leak bugHaoxiang Li1-0/+12
The check for get_zeroed_page() leads to a direct return and overlooked the memory leak caused by loop allocation. Add a free helper to free spaces allocated by get_zeroed_page(). Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Link: https://lore.kernel.org/r/20250218034104.2436469-1-haoxiang_li2024@163.com Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-03-04s390/sclp: Add check for get_zeroed_page()Haoxiang Li1-0/+17
Add check for the return value of get_zeroed_page() in sclp_console_init() to prevent null pointer dereference. Furthermore, to solve the memory leak caused by the loop allocation, add a free helper to do the free job. Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Link: https://lore.kernel.org/r/20250218025216.2421548-1-haoxiang_li2024@163.com Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-03-04s390: Convert MACHINE_IS_[LPAR|VM|KVM], etc, machine_is_[lpar|vm|kvm]()Heiko Carstens12-17/+28
Move machine type detection to the decompressor and use static branches to implement and use machine_is_[lpar|vm|kvm]() instead of a runtime check via MACHINE_IS_[LPAR|VM|KVM]. Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-03-04s390/kvm: Convert MACHINE_HAS_ESOP to machine_has_esop()Heiko Carstens2-2/+2
Use static branch(es) to implement and use machine_has_esop() instead of a runtime check via MACHINE_HAS_ESOP. Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-03-04s390/tlb: Convert MACHINE_HAS_TLB_GUEST to machine_has_tlb_guest()Heiko Carstens2-2/+11
Use static branch(es) to implement and use machine_has_tlb_guest() instead of a runtime check via MACHINE_HAS_TLB_GUEST. Also add sclp_early_detect_machine_features() in order to allow for feature detection from the decompressor. Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-03-04s390/cpufeature: Convert MACHINE_HAS_EDAT1 to cpu_has_edat1()Heiko Carstens1-1/+2
Convert MACHINE_HAS_... to cpu_has_...() which uses test_facility() instead of testing the machine_flags lowcore member if the feature is present. test_facility() generates better code since it results in a static branch without accessing memory. The branch is patched via alternatives by the decompressor depending on the availability of the required facility. Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-01-29s390/vmlogrdr: Use array instead of string initializerHeiko Carstens1-3/+3
Compiling vmlogrdr with GCC 15 generates this warning: CC [M] drivers/s390/char/vmlogrdr.o drivers/s390/char/vmlogrdr.c:126:29: error: initializer-string for array of ‘char’ is too long [-Werror=unterminated-string-initialization] 126 | { .system_service = "*LOGREC ", Given that the system_service array intentionally contains a non-null terminated string use an array initializer, instead of string initializer to get rid of this warning. Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2025-01-29s390/vmlogrdr: Use internal_name for error messagesHeiko Carstens1-1/+1
Use the internal_name member of vmlogrdr_priv_t to print error messages instead of the system_service member. The system_service member is not a string, but a non-null terminated eight byte character array, which contains the ASCII representation of a z/VM system service. Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2025-01-28s390/sclp: Initialize sclp subsystem via arch_cpu_finalize_init()Heiko Carstens1-10/+2
With the switch to GENERIC_CPU_DEVICES an early call to the sclp subsystem was added to smp_prepare_cpus(). This will usually succeed since the sclp subsystem is implicitly initialized early enough if an sclp based console is present. If no such console is present the initialization happens with an arch_initcall(); in such cases calls to the sclp subsystem will fail. For CPU detection this means that the fallback sigp loop will be used permanently to detect CPUs instead of the preferred READ_CPU_INFO sclp request. Fix this by adding an explicit early sclp_init() call via arch_cpu_finalize_init(). Reported-by: Sheshu Ramanandan <sheshu.ramanandan@ibm.com> Fixes: 4a39f12e753d ("s390/smp: Switch to GENERIC_CPU_DEVICES") Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2025-01-15s390/diag: Add memory topology information via diag310Mete Durlu1-0/+1
Introduce diag310 and memory topology related subcodes. Provide memory topology information obtanied from diag310 to userspace via diag ioctl. Signed-off-by: Mete Durlu <meted@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2025-01-07s390/sclp: Constify 'struct bin_attribute'Thomas Weißschuh2-4/+4
The sysfs core now allows instances of 'struct bin_attribute' to be moved into read-only memory. Make use of that to protect them against accidental or malicious modifications. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Link: https://lore.kernel.org/r/20241211-sysfs-const-bin_attr-s390-v1-4-be01f66bfcf7@weissschuh.net Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-12-18Merge branch 'pci-device-recovery' into featuresAlexander Gordeev2-33/+0
Niklas Schnelle says: =================== This patch series enhances the introspectability of the PCI device recovery for firmware. Until now when Linux performs recovery in response to a firmware error report. For example, until now firmware debug data would have no indication if the recovery was successfull or if it failed, for example due to KVM pass-through. Improve on this by reporting recovery status as well as some debug information such as device driver name and s390dbf/pci_msg/sprintf logs via the SCLP Write Event Data Action Qualifier 2 (Log Data provided) mechanism. =================== Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-12-17s390/diag324: Retrieve power readings via diag 0x324Sumanth Korikkar2-1/+5
Retrieve electrical power readings for resources in a computing environment via diag 0x324. diag 0x324 stores the power readings in the power information block (pib). Provide power readings from pib via diag324 ioctl interface. diag324 ioctl provides new pib to the user only if the threshold time has passed since the last call. Otherwise, cache data is returned. When there are no active readers, cleanup of pib buffer is performed. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-12-16s390/pci: Report PCI error recovery results via SCLPNiklas Schnelle2-33/+0
Add a mechanism with which the status of PCI error recovery runs is reported to the platform. Together with the status supply additional information that may aid in problem determination. Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-11-29Merge tag 'driver-core-6.13-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is a small set of driver core changes for 6.13-rc1. Nothing major for this merge cycle, except for the two simple merge conflicts are here just to make life interesting. Included in here are: - sysfs core changes and preparations for more sysfs api cleanups that can come through all driver trees after -rc1 is out - fw_devlink fixes based on many reports and debugging sessions - list_for_each_reverse() removal, no one was using it! - last-minute seq_printf() format string bug found and fixed in many drivers all at once. - minor bugfixes and changes full details in the shortlog" * tag 'driver-core-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (35 commits) Fix a potential abuse of seq_printf() format string in drivers cpu: Remove spurious NULL in attribute_group definition s390/con3215: Remove spurious NULL in attribute_group definition perf: arm-ni: Remove spurious NULL in attribute_group definition driver core: Constify bin_attribute definitions sysfs: attribute_group: allow registration of const bin_attribute firmware_loader: Fix possible resource leak in fw_log_firmware_info() drivers: core: fw_devlink: Fix excess parameter description in docstring driver core: class: Correct WARN() message in APIs class_(for_each|find)_device() cacheinfo: Use of_property_present() for non-boolean properties cdx: Fix cdx_mmap_resource() after constifying attr in ->mmap() drivers: core: fw_devlink: Make the error message a bit more useful phy: tegra: xusb: Set fwnode for xusb port devices drm: display: Set fwnode for aux bus devices driver core: fw_devlink: Stop trying to optimize cycle detection logic driver core: Constify attribute arguments of binary attributes sysfs: bin_attribute: add const read/write callback variants sysfs: implement all BIN_ATTR_* macros in terms of __BIN_ATTR() sysfs: treewide: constify attribute callback of bin_attribute::llseek() sysfs: treewide: constify attribute callback of bin_attribute::mmap() ...
2024-11-18Merge tag 's390-6.13-1' of ↵Linus Torvalds9-55/+156
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: - Add firmware sysfs interface which allows user space to retrieve the dump area size of the machine - Add 'measurement_chars_full' CHPID sysfs attribute to make the complete associated Channel-Measurements Characteristics Block available - Add virtio-mem support - Move gmap aka KVM page fault handling from the main fault handler to KVM code. This is the first step to make s390 KVM page fault handling similar to other architectures. With this first step the main fault handler does not have any special handling anymore, and therefore convert it to support LOCK_MM_AND_FIND_VMA - With gcc 14 s390 support for flag output operand support for inline assemblies was added. This allows for several optimizations: - Provide a cmpxchg inline assembly which makes use of this, and provide all variants of arch_try_cmpxchg() so that the compiler can generate slightly better code - Convert a few cmpxchg() loops to try_cmpxchg() loops - Similar to x86 add a CC_OUT() helper macro (and other macros), and convert all inline assemblies to make use of them, so that depending on compiler version better code can be generated - List installed host-key hashes in sysfs if the machine supports the Query Ultravisor Keys UVC - Add 'Retrieve Secret' ioctl which allows user space in protected execution guests to retrieve previously stored secrets from the Ultravisor - Add pkey-uv module which supports the conversion of Ultravisor retrievable secrets to protected keys - Extend the existing paes cipher to exploit the full AES-XTS hardware acceleration introduced with message-security assist extension 10 - Convert hopefully all sysfs show functions to use sysfs_emit() so that the constant flow of such patches stop - For PCI devices make use of the newly added Topology ID attribute to enable whole card multi-function support despite the change to PCHID per port. Additionally improve the overall robustness and usability of the multifunction support - Various other small improvements, fixes, and cleanups * tag 's390-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (133 commits) s390/cio/ioasm: Convert to use flag output macros s390/cio/qdio: Convert to use flag output macros s390/sclp: Convert to use flag output macros s390/dasd: Convert to use flag output macros s390/boot/physmem: Convert to use flag output macros s390/pci: Convert to use flag output macros s390/kvm: Convert to use flag output macros s390/extmem: Convert to use flag output macros s390/string: Convert to use flag output macros s390/diag: Convert to use flag output macros s390/irq: Convert to use flag output macros s390/smp: Convert to use flag output macros s390/uv: Convert to use flag output macros s390/pai: Convert to use flag output macros s390/mm: Convert to use flag output macros s390/cpu_mf: Convert to use flag output macros s390/cpcmd: Convert to use flag output macros s390/topology: Convert to use flag output macros s390/time: Convert to use flag output macros s390/pageattr: Convert to use flag output macros ...
2024-11-18s390/con3215: Remove spurious NULL in attribute_group definitionThomas Weißschuh1-1/+0
This NULL value is most-likely a copy-paste error from an array definition. So far the NULL didn't have any effect. As there will be a union in struct attribute_group at this location, it will trigger a compiler warning. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20241118-sysfs-const-attribute_group-fixes-v1-2-48e0b0ad8cba@weissschuh.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-13s390/sclp: Convert to use flag output macrosHeiko Carstens1-7/+11
Use flag output macros in inline asm to allow for better code generation if the compiler has support for the flag output constraint. Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-11-12s390/con3270: Use NULL instead of 0 for pointersHeiko Carstens1-2/+2
Get rid of sparse warnings: CHECK drivers/s390/char/con3270.c drivers/s390/char/con3270.c:531:15: warning: Using plain integer as NULL pointer drivers/s390/char/con3270.c:749:15: warning: Using plain integer as NULL pointer Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-11-07s390/uvdevice: Fix and slightly improve kernel-doc commentHeiko Carstens1-12/+20
Fix incorrect kernel-doc comment style, add missing return statement, fix incorrect parameter name, and add some additional consistency across all kernel-doc comments. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-11-07s390/uvdevice: Support longer secret listsSteffen Eiden1-19/+50
Enable the list IOCTL to provide lists longer than one page (85 entries). The list IOCTL now accepts any argument length in page granularity. It fills the argument up to this length with entries until the list ends. User space unaware of this enhancement will still receive one page of data and an uv_rc 0x0100. Signed-off-by: Steffen Eiden <seiden@linux.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Link: https://lore.kernel.org/r/20241104153609.1361388-1-seiden@linux.ibm.com Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Message-ID: <20241104153609.1361388-1-seiden@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-29s390/uvdevice: Add Retrieve Secret IOCTLSteffen Eiden1-1/+57
Add a new IOCL number to support the new Retrieve Secret UVC for user-space. User-space provides the index of the secret (u16) to retrieve. The uvdevice calls the Retrieve Secret UVC and copies the secret into the provided buffer if it fits. To get the secret type, index, and size user-space needs to call the List UVC first. Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Steffen Eiden <seiden@linux.ibm.com> Link: https://lore.kernel.org/r/20241024062638.1465970-4-seiden@linux.ibm.com Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-25s390/vmur: Switch over to sysfs_emit()Mete Durlu1-1/+1
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for presenting attributes to user space in sysfs. Convert the left-over uses in the char/vmur code. Signed-off-by: Mete Durlu <meted@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-25s390/sclp_cpi: Switch over to sysfs_emit()Mete Durlu1-4/+4
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for presenting attributes to user space in sysfs. Convert the left-over uses in the char/sclp_cpi_sys code. Signed-off-by: Mete Durlu <meted@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-25s390/sclp_ocf: Switch over to sysfs_emit()Mete Durlu1-2/+2
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for presenting attributes to user space in sysfs. Convert the left-over uses in the char/sclp_ocf code. Signed-off-by: Mete Durlu <meted@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-25s390/vmlogrdr: Switch over to sysfs_emit()Mete Durlu1-2/+2
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for presenting attributes to user space in sysfs. Convert the left-over uses in the char/vmlogrdr code. Signed-off-by: Mete Durlu <meted@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-25s390/tape: Switch over to sysfs_emit()Mete Durlu1-8/+8
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for presenting attributes to user space in sysfs. Convert the left-over uses in the char/tape_core code. Signed-off-by: Mete Durlu <meted@linux.ibm.com> Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-16s390/sclp_vt220: Convert newlines to CRLF instead of LFCRThomas Weißschuh1-2/+2
According to the VT220 specification the possible character combinations sent on RETURN are only CR or CRLF [0]. The Return key sends either a CR character (0/13) or a CR character (0/13) and an LF character (0/10), depending on the set/reset state of line feed/new line mode (LNM). The sclp/vt220 driver however uses LFCR. This can confuse tools, for example the kunit runner. Link: https://vt100.net/docs/vt220-rm/chapter3.html#S3.2 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Link: https://lore.kernel.org/r/20241014-s390-kunit-v1-2-941defa765a6@linutronix.de Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-16s390/sclp: Deactivate sclp after all its usersThomas Weißschuh1-1/+2
On reboot the SCLP interface is deactivated through a reboot notifier. This happens before other components using SCLP have the chance to run their own reboot notifiers. Two of those components are the SCLP console and tty drivers which try to flush the last outstanding messages. At that point the SCLP interface is already unusable and the messages are discarded. Execute sclp_deactivate() as late as possible to avoid this issue. Fixes: 4ae46db99cd8 ("s390/consoles: improve panic notifiers reliability") Cc: stable@vger.kernel.org Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Link: https://lore.kernel.org/r/20241014-s390-kunit-v1-1-941defa765a6@linutronix.de Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-10s390/sclp: Allow user-space to provide PCI reports for optical modulesNiklas Schnelle1-0/+2
The new SCLP action qualifier 3 is used by user-space code to provide optical module monitoring data to the platform. Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-09-27[tree-wide] finally take no_llseek outAl Viro7-8/+0
no_llseek had been defined to NULL two years ago, in commit 868941b14441 ("fs: remove no_llseek") To quote that commit, At -rc1 we'll need do a mechanical removal of no_llseek - git grep -l -w no_llseek | grep -v porting.rst | while read i; do sed -i '/\<no_llseek\>/d' $i done would do it. Unfortunately, that hadn't been done. Linus, could you do that now, so that we could finally put that thing to rest? All instances are of the form .llseek = no_llseek, so it's obviously safe. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-09-21Merge tag 's390-6.12-1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Optimize ftrace and kprobes code patching and avoid stop machine for kprobes if sequential instruction fetching facility is available - Add hiperdispatch feature to dynamically adjust CPU capacity in vertical polarization to improve scheduling efficiency and overall performance. Also add infrastructure for handling warning track interrupts (WTI), allowing for graceful CPU preemption - Rework crypto code pkey module and split it into separate, independent modules for sysfs, PCKMO, CCA, and EP11, allowing modules to load only when the relevant hardware is available - Add hardware acceleration for HMAC modes and the full AES-XTS cipher, utilizing message-security assist extensions (MSA) 10 and 11. It introduces new shash implementations for HMAC-SHA224/256/384/512 and registers the hardware-accelerated AES-XTS cipher as the preferred option. Also add clear key token support - Add MSA 10 and 11 processor activity instrumentation counters to perf and update PAI Extension 1 NNPA counters - Cleanup cpu sampling facility code and rework debug/WARN_ON_ONCE statements - Add support for SHA3 performance enhancements introduced with MSA 12 - Add support for the query authentication information feature of MSA 13 and introduce the KDSA CPACF instruction. Provide query and query authentication information in sysfs, enabling tools like cpacfinfo to present this data in a human-readable form - Update kernel disassembler instructions - Always enable EXPOLINE_EXTERN if supported by the compiler to ensure kpatch compatibility - Add missing warning handling and relocated lowcore support to the early program check handler - Optimize ftrace_return_address() and avoid calling unwinder - Make modules use kernel ftrace trampolines - Strip relocs from the final vmlinux ELF file to make it roughly 2 times smaller - Dump register contents and call trace for early crashes to the console - Generate ptdump address marker array dynamically - Fix rcu_sched stalls that might occur when adding or removing large amounts of pages at once to or from the CMM balloon - Fix deadlock caused by recursive lock of the AP bus scan mutex - Unify sync and async register save areas in entry code - Cleanup debug prints in crypto code - Various cleanup and sanitizing patches for the decompressor - Various small ftrace cleanups * tag 's390-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (84 commits) s390/crypto: Display Query and Query Authentication Information in sysfs s390/crypto: Add Support for Query Authentication Information s390/crypto: Rework RRE and RRF CPACF inline functions s390/crypto: Add KDSA CPACF Instruction s390/disassembler: Remove duplicate instruction format RSY_RDRU s390/boot: Move boot_printk() code to own file s390/boot: Use boot_printk() instead of sclp_early_printk() s390/boot: Rename decompressor_printk() to boot_printk() s390/boot: Compile all files with the same march flag s390: Use MARCH_HAS_*_FEATURES defines s390: Provide MARCH_HAS_*_FEATURES defines s390/facility: Disable compile time optimization for decompressor code s390/boot: Increase minimum architecture to z10 s390/als: Remove obsolete comment s390/sha3: Fix SHA3 selftests failures s390/pkey: Add AES xts and HMAC clear key token support s390/cpacf: Add MSA 10 and 11 new PCKMO functions s390/mm: Add cond_resched() to cmm_alloc/free_pages() s390/pai_ext: Update PAI extension 1 counters s390/pai_crypto: Add support for MSA 10 and 11 pai counters ...
2024-09-09s390: remove unused f_versionChristian Brauner1-3/+0
It's not used so don't bother with it at all. Link: https://lore.kernel.org/r/20240830-vfs-file-f_version-v1-4-6d3e4816aa7b@kernel.org Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-08-29s390/wti: Introduce infrastructure for warning track interruptTobias Huschle1-0/+1
The warning-track interrupt (wti) provides a notification that the receiving CPU will be pre-empted from its physical CPU within a short time frame. This time frame is called grace period and depends on the machine type. Giving up the CPU on time may prevent a task to get stuck while holding a resource. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Mete Durlu <meted@linux.ibm.com> Signed-off-by: Tobias Huschle <huschle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2024-07-23s390: Remove protvirt and kvm config guards for uv codeJanosch Frank1-1/+1
Removing the CONFIG_PROTECTED_VIRTUALIZATION_GUEST ifdefs and config option as well as CONFIG_KVM ifdefs in uv files. Having this configurable has been more of a pain than a help. It's time to remove the ifdefs and the config option. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2024-07-21Merge tag 'mm-stable-2024-07-21-14-50' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - In the series "mm: Avoid possible overflows in dirty throttling" Jan Kara addresses a couple of issues in the writeback throttling code. These fixes are also targetted at -stable kernels. - Ryusuke Konishi's series "nilfs2: fix potential issues related to reserved inodes" does that. This should actually be in the mm-nonmm-stable tree, along with the many other nilfs2 patches. My bad. - More folio conversions from Kefeng Wang in the series "mm: convert to folio_alloc_mpol()" - Kemeng Shi has sent some cleanups to the writeback code in the series "Add helper functions to remove repeated code and improve readability of cgroup writeback" - Kairui Song has made the swap code a little smaller and a little faster in the series "mm/swap: clean up and optimize swap cache index". - In the series "mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David Hildenbrand has reworked the rather sketchy handling of the use of the zeropage in MAP_SHARED mappings. I don't see any runtime effects here - more a cleanup/understandability/maintainablity thing. - Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling of higher addresses, for aarch64. The (poorly named) series is "Restructure va_high_addr_switch". - The core TLB handling code gets some cleanups and possible slight optimizations in Bang Li's series "Add update_mmu_tlb_range() to simplify code". - Jane Chu has improved the handling of our fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in the series "Enhance soft hwpoison handling and injection". - Jeff Johnson has sent a billion patches everywhere to add MODULE_DESCRIPTION() to everything. Some landed in this pull. - In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang has simplified migration's use of hardware-offload memory copying. - Yosry Ahmed performs more folio API conversions in his series "mm: zswap: trivial folio conversions". - In the series "large folios swap-in: handle refault cases first", Chuanhua Han inches us forward in the handling of large pages in the swap code. This is a cleanup and optimization, working toward the end objective of full support of large folio swapin/out. - In the series "mm,swap: cleanup VMA based swap readahead window calculation", Huang Ying has contributed some cleanups and a possible fixlet to his VMA based swap readahead code. - In the series "add mTHP support for anonymous shmem" Baolin Wang has taught anonymous shmem mappings to use multisize THP. By default this is a no-op - users must opt in vis sysfs controls. Dramatic improvements in pagefault latency are realized. - David Hildenbrand has some cleanups to our remaining use of page_mapcount() in the series "fs/proc: move page_mapcount() to fs/proc/internal.h". - David also has some highmem accounting cleanups in the series "mm/highmem: don't track highmem pages manually". - Build-time fixes and cleanups from John Hubbard in the series "cleanups, fixes, and progress towards avoiding "make headers"". - Cleanups and consolidation of the core pagemap handling from Barry Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers and utilize them". - Lance Yang's series "Reclaim lazyfree THP without splitting" has reduced the latency of the reclaim of pmd-mapped THPs under fairly common circumstances. A 10x speedup is seen in a microbenchmark. It does this by punting to aother CPU but I guess that's a win unless all CPUs are pegged. - hugetlb_cgroup cleanups from Xiu Jianfeng in the series "mm/hugetlb_cgroup: rework on cftypes". - Miaohe Lin's series "Some cleanups for memory-failure" does just that thing. - Someone other than SeongJae has developed a DAMON feature in Honggyu Kim's series "DAMON based tiered memory management for CXL memory". This adds DAMON features which may be used to help determine the efficiency of our placement of CXL/PCIe attached DRAM. - DAMON user API centralization and simplificatio work in SeongJae Park's series "mm/damon: introduce DAMON parameters online commit function". - In the series "mm: page_type, zsmalloc and page_mapcount_reset()" David Hildenbrand does some maintenance work on zsmalloc - partially modernizing its use of pageframe fields. - Kefeng Wang provides more folio conversions in the series "mm: remove page_maybe_dma_pinned() and page_mkclean()". - More cleanup from David Hildenbrand, this time in the series "mm/memory_hotplug: use PageOffline() instead of PageReserved() for !ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline() pages" and permits the removal of some virtio-mem hacks. - Barry Song's series "mm: clarify folio_add_new_anon_rmap() and __folio_add_anon_rmap()" is a cleanup to the anon folio handling in preparation for mTHP (multisize THP) swapin. - Kefeng Wang's series "mm: improve clear and copy user folio" implements more folio conversions, this time in the area of large folio userspace copying. - The series "Docs/mm/damon/maintaier-profile: document a mailing tool and community meetup series" tells people how to get better involved with other DAMON developers. From SeongJae Park. - A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does that. - David Hildenbrand sends along more cleanups, this time against the migration code. The series is "mm/migrate: move NUMA hinting fault folio isolation + checks under PTL". - Jan Kara has found quite a lot of strangenesses and minor errors in the readahead code. He addresses this in the series "mm: Fix various readahead quirks". - SeongJae Park's series "selftests/damon: test DAMOS tried regions and {min,max}_nr_regions" adds features and addresses errors in DAMON's self testing code. - Gavin Shan has found a userspace-triggerable WARN in the pagecache code. The series "mm/filemap: Limit page cache size to that supported by xarray" addresses this. The series is marked cc:stable. - Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations and cleanup" cleans up and slightly optimizes KSM. - Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of code motion. The series (which also makes the memcg-v1 code Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put under config option" and "mm: memcg: put cgroup v1-specific memcg data under CONFIG_MEMCG_V1" - Dan Schatzberg's series "Add swappiness argument to memory.reclaim" adds an additional feature to this cgroup-v2 control file. - The series "Userspace controls soft-offline pages" from Jiaqi Yan permits userspace to stop the kernel's automatic treatment of excessive correctable memory errors. In order to permit userspace to monitor and handle this situation. - Kefeng Wang's series "mm: migrate: support poison recover from migrate folio" teaches the kernel to appropriately handle migration from poisoned source folios rather than simply panicing. - SeongJae Park's series "Docs/damon: minor fixups and improvements" does those things. - In the series "mm/zsmalloc: change back to per-size_class lock" Chengming Zhou improves zsmalloc's scalability and memory utilization. - Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for pinning memfd folios" makes the GUP code use FOLL_PIN rather than bare refcount increments. So these paes can first be moved aside if they reside in the movable zone or a CMA block. - Andrii Nakryiko has added a binary ioctl()-based API to /proc/pid/maps for much faster reading of vma information. The series is "query VMAs from /proc/<pid>/maps". - In the series "mm: introduce per-order mTHP split counters" Lance Yang improves the kernel's presentation of developer information related to multisize THP splitting. - Michael Ellerman has developed the series "Reimplement huge pages without hugepd on powerpc (8xx, e500, book3s/64)". This permits userspace to use all available huge page sizes. - In the series "revert unconditional slab and page allocator fault injection calls" Vlastimil Babka removes a performance-affecting and not very useful feature from slab fault injection. * tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits) mm/mglru: fix ineffective protection calculation mm/zswap: fix a white space issue mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio mm/hugetlb: fix possible recursive locking detected warning mm/gup: clear the LRU flag of a page before adding to LRU batch mm/numa_balancing: teach mpol_to_str about the balancing mode mm: memcg1: convert charge move flags to unsigned long long alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting lib: reuse page_ext_data() to obtain codetag_ref lib: add missing newline character in the warning message mm/mglru: fix overshooting shrinker memory mm/mglru: fix div-by-zero in vmpressure_calc_level() mm/kmemleak: replace strncpy() with strscpy() mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB mm: ignore data-race in __swap_writepage hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr mm: shmem: rename mTHP shmem counters mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async() mm/migrate: putback split folios when numa hint migration fails ...
2024-07-18Merge tag 's390-6.11-1' of ↵Linus Torvalds8-16/+39
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Remove restrictions on PAI NNPA and crypto counters, enabling concurrent per-task and system-wide sampling and counting events - Switch to GENERIC_CPU_DEVICES by setting up the CPU present mask in the architecture code and letting the generic code handle CPU bring-up - Add support for the diag204 busy indication facility to prevent undesirable blocking during hypervisor logical CPU utilization queries. Implement results caching - Improve the handling of Store Data SCLP events by suppressing unnecessary warning, preventing buffer release in I/O during failures, and adding timeout handling for Store Data requests to address potential firmware issues - Provide optimized __arch_hweight*() implementations - Remove the unnecessary CPU KOBJ_CHANGE uevents generated during topology updates, as they are unused and also not present on other architectures - Cleanup atomic_ops, optimize __atomic_set() for small values and __atomic_cmpxchg_bool() for compilers supporting flag output constraint - Couple of cleanups for KVM: - Move and improve KVM struct definitions for DAT tables from gaccess.c to a new header - Pass the asce as parameter to sie64a() - Make the crdte() and cspg() page table handling wrappers return a boolean to indicate success, like the other existing "compare and swap" wrappers - Add documentation for HWCAP flags - Switch to obtaining total RAM pages from memblock instead of totalram_pages() during mm init, to ensure correct calculation of zero page size, when defer_init is enabled - Refactor lowcore access and switch to using the get_lowcore() function instead of the S390_lowcore macro - Cleanups for PG_arch_1 and folio handling in UV and hugetlb code - Add missing MODULE_DESCRIPTION() macros - Fix VM_FAULT_HWPOISON handling in do_exception() * tag 's390-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (54 commits) s390/mm: Fix VM_FAULT_HWPOISON handling in do_exception() s390/kvm: Move bitfields for dat tables s390/entry: Pass the asce as parameter to sie64a() s390/sthyi: Use cached data when diag is busy s390/sthyi: Move diag operations s390/hypfs_diag: Diag204 busy loop s390/diag: Add busy-indication-facility requirements s390/diag: Diag204 add busy return errno s390/diag: Return errno's from diag204 s390/sclp: Diag204 busy indication facility detection s390/atomic_ops: Make use of flag output constraint s390/atomic_ops: Improve __atomic_set() for small values s390/atomic_ops: Use symbolic names s390/smp: Switch to GENERIC_CPU_DEVICES s390/hwcaps: Add documentation for HWCAP flags s390/pgtable: Make crdte() and cspg() return a value s390/topology: Remove CPU KOBJ_CHANGE uevents s390/sclp: Add timeout to Store Data requests s390/sclp: Prevent release of buffer in I/O s390/sclp: Suppress unnecessary Store Data warning ...
2024-07-10s390/sclp: Diag204 busy indication facility detectionMete Durlu1-0/+1
Detect diag204 busy indication facility. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Tobias Huschle <huschle@linux.ibm.com> Signed-off-by: Mete Durlu <meted@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2024-07-10s390/smp: Switch to GENERIC_CPU_DEVICESSven Schnelle1-1/+1
Instead of setting up non-boot CPUs early in architecture code, only setup the cpu present mask and let the generic code handle cpu bringup. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2024-07-03s390/irqflags: do not instrument arch_local_irq_*() with KMSANIlya Leoshkevich1-1/+1
Lockdep generates the following false positives with KMSAN on s390x: [ 6.063666] DEBUG_LOCKS_WARN_ON(lockdep_hardirqs_enabled()) [ ...] [ 6.577050] Call Trace: [ 6.619637] [<000000000690d2de>] check_flags+0x1fe/0x210 [ 6.665411] ([<000000000690d2da>] check_flags+0x1fa/0x210) [ 6.707478] [<00000000006cec1a>] lock_acquire+0x2ca/0xce0 [ 6.749959] [<00000000069820ea>] _raw_spin_lock_irqsave+0xea/0x190 [ 6.794912] [<00000000041fc988>] __stack_depot_save+0x218/0x5b0 [ 6.838420] [<000000000197affe>] __msan_poison_alloca+0xfe/0x1a0 [ 6.882985] [<0000000007c5827c>] start_kernel+0x70c/0xd50 [ 6.927454] [<0000000000100036>] startup_continue+0x36/0x40 Between trace_hardirqs_on() and `stosm __mask, 3` lockdep thinks that interrupts are on, but on the CPU they are still off. KMSAN instrumentation takes spinlocks, giving lockdep a chance to see and complain about this discrepancy. KMSAN instrumentation is inserted in order to poison the __mask variable. Disable instrumentation in the respective functions. They are very small and it's easy to see that no important metadata updates are lost because of this. Link: https://lkml.kernel.org/r/20240621113706.315500-31-iii@linux.ibm.com Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <kasan-dev@googlegroups.com> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-01s390/sclp: Add timeout to Store Data requestsPeter Oberparleiter1-4/+10
Due to a bug in some firmware versions, Store Data requests might not get an event response in certain situations. As a result, the boot process will be blocked indefinitely. Fix this by introducing timeout handling for Store Data requests. In case a timeout occurs, the Store Data operation is halted and no data is retrieved from the SCLP facility. Note: A minority of installed systems rely on Store Data result for device auto-configuration. These systems will fail to boot in case of a Store Data timeout and will need to be switched to manual device configuration as workaround. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-07-01s390/sclp: Prevent release of buffer in I/OPeter Oberparleiter1-2/+8
When a task waiting for completion of a Store Data operation is interrupted, an attempt is made to halt this operation. If this attempt fails due to a hardware or firmware problem, there is a chance that the SCLP facility might store data into buffers referenced by the original operation at a later time. Handle this situation by not releasing the referenced data buffers if the halt attempt fails. For current use cases, this might result in a leak of few pages of memory in case of a rare hardware/firmware malfunction. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-07-01s390/sclp: Suppress unnecessary Store Data warningPeter Oberparleiter1-0/+4
On systems that do not support Store Data events (such as when running as KVM guest) the following warning message appears during boot: sclp_sd: Store Data request failed (eq=2, di=3, response=0x40f0, flags=0x00, status=0, rc=-5) This warning does not add any useful information since the result is expected due to missing support for that event type. Suppress this message by checking the associated masks of supported events before issuing a Store Data event. Suggested-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-06-28s390/3270: Add missing MODULE_DESCRIPTION() macrosJeff Johnson3-0/+3
With ARCH=s390, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/s390/char/raw3270.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/s390/char/con3270.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/s390/char/fs3270.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20240615-md-s390-drivers-s390-char-v1-1-d1cd23ff6476@quicinc.com Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-06-24s390/sclp: Fix sclp_init() cleanup on failureHeiko Carstens1-0/+1
If sclp_init() fails it only partially cleans up: if there are multiple failing calls to sclp_init() sclp_state_change_event will be added several times to sclp_reg_list, which results in the following warning: ------------[ cut here ]------------ list_add double add: new=000003ffe1598c10, prev=000003ffe1598bf0, next=000003ffe1598c10. WARNING: CPU: 0 PID: 1 at lib/list_debug.c:35 __list_add_valid_or_report+0xde/0xf8 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.10.0-rc3 Krnl PSW : 0404c00180000000 000003ffe0d6076a (__list_add_valid_or_report+0xe2/0xf8) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 ... Call Trace: [<000003ffe0d6076a>] __list_add_valid_or_report+0xe2/0xf8 ([<000003ffe0d60766>] __list_add_valid_or_report+0xde/0xf8) [<000003ffe0a8d37e>] sclp_init+0x40e/0x450 [<000003ffe00009f2>] do_one_initcall+0x42/0x1e0 [<000003ffe15b77a6>] do_initcalls+0x126/0x150 [<000003ffe15b7a0a>] kernel_init_freeable+0x1ba/0x1f8 [<000003ffe0d6650e>] kernel_init+0x2e/0x180 [<000003ffe000301c>] __ret_from_fork+0x3c/0x60 [<000003ffe0d759ca>] ret_from_fork+0xa/0x30 Fix this by removing sclp_state_change_event from sclp_reg_list when sclp_init() fails. Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-06-18s390/sclp: Define commands for storage (un)assignmentAlexander Gordeev1-2/+5
Replace immediate values with SCLP_CMDW_UN|ASSIGN_STORAGE defines. Acked-by: Heiko Carstens <hca@linux.ibm.com> Link: https://lore.kernel.org/r/20240610151048.2548428-1-agordeev@linux.ibm.com Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2024-06-18s390/drivers: Replace S390_lowcore by get_lowcore()Sven Schnelle2-8/+8
Replace all S390_lowcore usages in drivers/s390 by get_lowcore(). Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2024-05-14s390/vmlogrdr: Make use of iucv_alloc_device()Heiko Carstens1-17/+3
Make use of iucv_alloc_device() to get rid of quite some code. In addition this also removes a cast to an incompatible function (clang W=1): drivers/s390/char/vmlogrdr.c:746:18: error: cast from 'void (*)(const void *)' to 'void (*)(struct device *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict] 746 | dev->release = (void (*)(struct device *))kfree; | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Reported-by: Nathan Chancellor <nathan@kernel.org> Closes: https://lore.kernel.org/r/20240417-s390-drivers-fix-cast-function-type-v1-1-fd048c9903b0@kernel.org Acked-by: Alexandra Winter <wintera@linux.ibm.com> Link: https://lore.kernel.org/r/20240506194454.1160315-3-hca@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-07 20:59:19 +0000