summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/imx6sl.dtsi
AgeCommit message (Expand)AuthorFilesLines
2015-12-22ARM: dts: imx6: Change the clock name for spba clockShengjiu Wang1-1/+1
2015-12-22ARM: dts: imx6: change default burst size for USBPeter Chen1-0/+6
2015-12-22ARM: dts: imx6: set ahb-burst-config as 0 for USBPeter Chen1-0/+3
2015-10-19ARM: dts: imx6: change the core clock of spdifShengjiu Wang1-0/+16
2015-10-19ARM: dts: imx6sl: Complete the dcp nodeFabio Estevam1-1/+4
2015-08-11ARM: dts: imx: update snvs to use syscon access registerFrank Li1-10/+11
2015-03-30ARM: dts: imx6sl: Add label snvs_rtcFabio Estevam1-1/+1
2015-03-30ARM: dts: imx6sl: Add power-domain information to gpc nodePhilipp Zabel1-0/+4
2015-03-30ARM: dts: imx: Add dr_mode host setting to all host-only usb instancesMatt Porter1-0/+1
2015-03-30ARM: imx6: convert GPC to stacked domainsMarc Zyngier1-1/+5
2014-11-23ARM: dts: imx6: add pm_power_off support for i.mx6 chipsRobin Gong1-0/+6
2014-09-16ARM: dts: imx6sl: add baud clock and clock-names for ssiShengjiu Wang1-3/+9
2014-09-16ARM: dts: imx6sl-evk: Add LCD supportFabio Estevam1-0/+6
2014-09-16ARM: i.MX: dts: Add simple-card supportAlexander Shiyan1-0/+3
2014-09-16ARM: dts: add thermal sensor support for i.mx6slAnson Huang1-1/+9
2014-07-18ARM: imx6: Align ssi nodes between mx6 variantsFabio Estevam1-6/+3
2014-07-18ARM: dts: imx: correct sdma compatbile for imx6sl and imx6sxShawn Guo1-1/+1
2014-07-18ARM: dts: mx6: Disable the keypad in the dtsi filesFabio Estevam1-0/+1
2014-06-17ARM: dts: imx6sl: correct the fec ipg clock sourceFugang Duan1-1/+1
2014-04-30ARM: dts: imx: Add alias for ethernet controllerMarek Vasut1-0/+1
2014-04-14ARM: dts: imx: add required #clock-cells for fixed-clockShawn Guo1-0/+2
2014-04-14ARM: dts: imx: drop invalid size and address cells propertiesLucas Stach1-2/+0
2014-02-10ARM: dts: imx6: use imx51-ssiMarkus Pargmann1-3/+9
2014-02-10ARM: dts: imx6sl: add keypad support for i.mx6sl-evk board.Anson Huang1-0/+2
2014-02-10ARM: dts: imx6sl: add ocram device supportAnson Huang1-0/+6
2014-02-10ARM: dts: imx6: add mxs phy controller idPeter Chen1-0/+2
2014-02-10ARM: dts: imx6: add anatop phandle for usbphyPeter Chen1-0/+2
2014-02-09ARM: dts: imx6: Use 'vddarm' as the regulator nameFabio Estevam1-1/+1
2014-02-09ARM: dts: imx6sl: Adding cpu frequency and VDDSOC/PU table.John Tobias1-0/+21
2014-02-09ARM: dts: imx: imx6sl.dtsi: use IRQ_TYPE_LEVEL_HIGHTroy Kisky1-57/+68
2014-02-09ARM: dts: imx6sl: make pinctrl nodes board specificShawn Guo1-213/+0
2013-11-11Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm...Linus Torvalds1-8/+164
2013-10-21ARM: imx: use imx_init_revision_from_anatop() on imx6slShawn Guo1-1/+3
2013-10-18ARM: imx: imx6sl iomuxc syscon is compatible to imx6qShawn Guo1-1/+2
2013-10-18ARM: dts: imx6sl: add a pinctrl for ECSPI1Huang Shijie1-0/+10
2013-10-12ARM: dts: imx6sl: add pinctrl uhs states for usdhcDong Aisheng1-0/+77
2013-09-26ARM: dts: imx6sl: Add spi aliasesFabio Estevam1-5/+9
2013-09-26ARM: imx: mx6sl-evk: Enable USB functionPeter Chen1-2/+60
2013-09-26ARM: dts: add iomuxc-gpr device node for imx6slFugang Duan1-0/+5
2013-09-26ARM: dts: imx6sl reuses imx6q sdma firmwareShawn Guo1-1/+2
2013-08-22ARM: dts: imx: use generic DMA bindings for SSI nodesShawn Guo1-0/+9
2013-08-22ARM: dts: imx6qdl/imx6sl: add the dma property for uartHuang Shijie1-0/+10
2013-08-22ARM: dts: imx6sl: add "fsl,imx6q-uart" for uart compatibleHuang Shijie1-5/+10
2013-08-22ARM: dts: imx: add #dma-cells property for sdmaHuang Shijie1-0/+1
2013-06-17ARM: dts: add device tree source for imx6sl SoCShawn Guo1-0/+779
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 07:53:32 +0000