summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
AgeCommit message (Expand)AuthorFilesLines
2019-03-19ARM: dts: pfla02: prepare storage devices to add paritionsMarco Felsch1-2/+2
2019-02-12ARM: dts: pfla02: add ksz9031 clock skew valuesPhilipp Zabel1-0/+13
2019-02-12ARM: dts: imx6qdl-phytec-pfla02: add missing interrupt-controller propertyMarco Felsch1-0/+1
2018-12-10ARM: dts: imx6qdl: Fix memory node duplicationMarco Franchi1-0/+1
2018-05-15ARM: dts: imx6qdl-phytec-pfla02: Use IRQ_TYPE specifierHernán Gonzalez1-1/+1
2018-02-12ARM: dts: imx: Add memory node unit nameMarco Franchi1-1/+1
2017-06-07ARM: dts: imx6: Fix PCI GPIO reset polarityFabio Estevam1-1/+1
2017-01-02ARM: dts: imx: remove obsoleted property fsl,spi-num-chipselectsVladimir Zapolskiy1-1/+0
2016-10-24ARM: dts: imx6qdl: Fix "ERROR: code indent should use tabs where possible"Jagan Teki1-3/+3
2016-08-09ARM: i.MX6 Phytec PFLA02: Add supplies for the SoC internal regulatorsSascha Hauer1-0/+12
2016-08-09ARM: dts: imx6qdl: don't configure reserved pad settingsUwe Kleine-König1-12/+12
2015-10-19ARM: dts: imx6: phyFLEX: fix typo in "pinctrl-names"Michael Opdenacker1-2/+2
2015-10-19ARM: dts: imx: add "jedec,spi-nor" flash compatible bindingRafał Miłecki1-1/+1
2015-07-24dts: imx6: fix sd card gpio polarity specified in device treeDong Aisheng1-4/+4
2015-04-27ARM: dts: imx6: phyFLEX: USB VBUS control is active-highPhilipp Zabel1-0/+2
2014-11-23ARM: dts: imx6: phyFLEX: Add CAN supportChristian Hemp1-0/+13
2014-11-23ARM: dts: imx6: phyFLEX: Add PCIeChristian Hemp1-0/+11
2014-11-23ARM: dts: imx6: phyFLEX: Set correct interrupt for pmicChristian Hemp1-3/+3
2014-11-23ARM: dts: imx6: phyFLEX: Enable gpmi in module fileChristian Hemp1-1/+1
2014-11-23ARM: dts: imx6: phyFLEX: set nodes in alphabetical orderChristian Hemp1-16/+16
2014-11-23ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boardsDmitry Lavnikevich1-0/+15
2014-11-23ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02Dmitry Lavnikevich1-0/+26
2014-08-29devicetree: Dialog Semiconductor consolidate existing vendor prefixes to stan...Steve Twiss1-1/+1
2014-07-18ARM: dts: pfla02: Add ethernet phy supply regulatorPhilipp Zabel1-0/+1
2014-05-16ARM: dts: pfla02: Add UART1 (uart3)Philipp Zabel1-0/+15
2014-05-16ARM: dts: pfla02: PHY reset is active-lowPhilipp Zabel1-1/+3
2014-05-16ARM: dts: pfla02: Add GPIO LEDsPhilipp Zabel1-0/+16
2014-05-16ARM: dts: Add Phytec pfla02 with i.MX6 DualLite/SoloPhilipp Zabel1-0/+323
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 06:43:17 +0000