summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
AgeCommit message (Collapse)AuthorFilesLines
2023-06-21ARM: dts: Move .dts files to vendor sub-directoriesRob Herring1-53/+0
The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Paul Barker <paul.barker@sancloud.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Nick Hawkins <nick.hawkins@hpe.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom Acked-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Romain Perier <romain.perier@gmail.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2021-07-19ARM: dts: aspeed: wedge40: Remove redundant ADC deviceTao Ren1-4/+0
Remove ADC device from wedge40 device tree because the device is already enabled in "ast2400-facebook-netbmc-common.dtsi". Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210719001724.6410-3-rentao.bupt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-12ARM: dts: aspeed: wedge40: Use common dtsiTao Ren1-111/+1
Simplify the Wedge40 device tree by using the common dtsi. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201111232330.30843-3-rentao.bupt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-08-25ARM: dts: aspeed: wedge40: Update UART4 pin settingsTao Ren1-1/+2
Enable UART4's NRTS4 (A19) pin because the pin is used for RS485 software emulation. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Link: https://lore.kernel.org/r/20200824182955.7988-3-rentao.bupt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-08-25ARM: dts: aspeed: wedge40: Update FMC flash0 labelTao Ren1-1/+1
Update FMC flash0's label to "spi0.0" so it's consistent with all the other Facebook OpenBMC platforms. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Link: https://lore.kernel.org/r/20200824182955.7988-2-rentao.bupt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-07-24ARM: dts: aspeed: wedge40: Enable pwm_tacho deviceTao Ren1-0/+29
Enable pwm_tacho device for fan control and monitoring in Wedge40. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-07-24ARM: dts: aspeed: wedge40: Enable ADC deviceTao Ren1-0/+9
Enable ADC controller and corresponding voltage sensoring channels for Wedge40. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-07-24ARM: dts: aspeed: wedge40: Disable unused i2c controllersTao Ren1-12/+0
Disable i2c bus #9, #10 and #13 as these i2c controllers are not used on Wedge40. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-17ARM: dts: aspeed: AST2400 disables hw checksumJoel Stanley1-1/+0
There is no need to specify this property in the device tree as the AST2400 does not have working hardware checksum and disables it in the driver. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Alexander Filippov <a.filippov@yadro.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-08-02ARM: dts: aspeed: Add Facebook Wedge40 BMCTao Ren1-0/+141
Add initial version of device tree for Facebook Wedge40 AST2400 BMC platform. Signed-off-by: Tao Ren <taoren@fb.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 05:32:39 +0000