diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/pci/pci.c | 38 | ||||
| -rw-r--r-- | drivers/pci/quirks.c | 13 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_pci.c | 6 |
3 files changed, 39 insertions, 18 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 227a3a979ec4..ce096272f52b 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -844,7 +844,9 @@ static inline bool platform_pci_need_resume(struct pci_dev *dev) static inline bool platform_pci_bridge_d3(struct pci_dev *dev) { - return pci_platform_pm ? pci_platform_pm->bridge_d3(dev) : false; + if (pci_platform_pm && pci_platform_pm->bridge_d3) + return pci_platform_pm->bridge_d3(dev); + return false; } /** @@ -4636,7 +4638,8 @@ static int pci_pm_reset(struct pci_dev *dev, int probe) * pcie_wait_for_link_delay - Wait until link is active or inactive * @pdev: Bridge device * @active: waiting for active or inactive? - * @delay: Delay to wait after link has become active (in ms) + * @delay: Delay to wait after link has become active (in ms). Specify %0 + * for no delay. * * Use this to wait till link becomes active or inactive. */ @@ -4649,10 +4652,10 @@ static bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active, /* * Some controllers might not implement link active reporting. In this - * case, we wait for 1000 + 100 ms. + * case, we wait for 1000 ms + any delay requested by the caller. */ if (!pdev->link_active_reporting) { - msleep(1100); + msleep(timeout + delay); return true; } @@ -4677,7 +4680,7 @@ static bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active, msleep(10); timeout -= 10; } - if (active && ret) + if (active && ret && delay) msleep(delay); else if (ret != active) pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n", @@ -4798,17 +4801,28 @@ void pci_bridge_wait_for_secondary_bus(struct pci_dev *dev) if (!pcie_downstream_port(dev)) return; - if (pcie_get_speed_cap(dev) <= PCIE_SPEED_5_0GT) { - pci_dbg(dev, "waiting %d ms for downstream link\n", delay); - msleep(delay); - } else { - pci_dbg(dev, "waiting %d ms for downstream link, after activation\n", - delay); - if (!pcie_wait_for_link_delay(dev, true, delay)) { + /* + * Per PCIe r5.0, sec 6.6.1, for downstream ports that support + * speeds > 5 GT/s, we must wait for link training to complete + * before the mandatory delay. + * + * We can only tell when link training completes via DLL Link + * Active, which is required for downstream ports that support + * speeds > 5 GT/s (sec 7.5.3.6). Unfortunately some common + * devices do not implement Link Active reporting even when it's + * required, so we'll check for that directly instead of checking + * the supported link speed. We assume devices without Link Active + * reporting can train in 100 ms regardless of speed. + */ + if (dev->link_active_reporting) { + pci_dbg(dev, "waiting for link to train\n"); + if (!pcie_wait_for_link_delay(dev, true, 0)) { /* Did not train, no need to wait any further */ return; } } + pci_dbg(child, "waiting %d ms to become accessible\n", delay); + msleep(delay); if (!pci_device_is_present(child)) { pci_dbg(child, "waiting additional %d ms to become accessible\n", delay); diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 885044d050a6..88de3256e1dd 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -5567,3 +5567,16 @@ static void pci_fixup_no_d0_pme(struct pci_dev *dev) dev->pme_support &= ~(PCI_PM_CAP_PME_D0 >> PCI_PM_CAP_PME_SHIFT); } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ASMEDIA, 0x2142, pci_fixup_no_d0_pme); + +/* + * Device [12d8:0x400e] and [12d8:0x400f] + * These devices advertise PME# support in all power states but don't + * reliably assert it. + */ +static void pci_fixup_no_pme(struct pci_dev *dev) +{ + pci_info(dev, "PME# is unreliable, disabling it\n"); + dev->pme_support = 0; +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_PERICOM, 0x400e, pci_fixup_no_pme); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_PERICOM, 0x400f, pci_fixup_no_pme); diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 0804469ff052..1a74d511b02a 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1869,12 +1869,6 @@ pci_moxa_setup(struct serial_private *priv, #define PCIE_DEVICE_ID_WCH_CH384_4S 0x3470 #define PCIE_DEVICE_ID_WCH_CH382_2S 0x3253 -#define PCI_VENDOR_ID_PERICOM 0x12D8 -#define PCI_DEVICE_ID_PERICOM_PI7C9X7951 0x7951 -#define PCI_DEVICE_ID_PERICOM_PI7C9X7952 0x7952 -#define PCI_DEVICE_ID_PERICOM_PI7C9X7954 0x7954 -#define PCI_DEVICE_ID_PERICOM_PI7C9X7958 0x7958 - #define PCI_VENDOR_ID_ACCESIO 0x494f #define PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SDB 0x1051 #define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2S 0x1053 |