summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/media/video/Makefile3
-rw-r--r--drivers/media/video/mt20xx.c6
-rw-r--r--drivers/media/video/tda8290.c20
-rw-r--r--drivers/media/video/tda9887.c7
-rw-r--r--drivers/media/video/tea5767.c334
-rw-r--r--drivers/media/video/tuner-core.c163
-rw-r--r--drivers/media/video/tuner-simple.c34
7 files changed, 457 insertions, 110 deletions
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 2dc906fdfa55..810e7aac0a53 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -7,8 +7,7 @@ bttv-objs := bttv-driver.o bttv-cards.o bttv-if.o \
zoran-objs := zr36120.o zr36120_i2c.o zr36120_mem.o
zr36067-objs := zoran_procfs.o zoran_device.o \
zoran_driver.o zoran_card.o
-tuner-objs := tuner-core.o tuner-simple.o mt20xx.o tda8290.o
-
+tuner-objs := tuner-core.o tuner-simple.o mt20xx.o tda8290.o tea5767.o
obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o v4l1-compat.o
obj-$(CONFIG_VIDEO_BT848) += bttv.o msp3400.o tvaudio.o \
diff --git a/drivers/media/video/mt20xx.c b/drivers/media/video/mt20xx.c
index 95ad17b7f38e..9c005cb128d7 100644
--- a/drivers/media/video/mt20xx.c
+++ b/drivers/media/video/mt20xx.c
@@ -1,5 +1,5 @@
/*
- * $Id: mt20xx.c,v 1.4 2005/03/04 09:24:56 kraxel Exp $
+ * $Id: mt20xx.c,v 1.5 2005/06/16 08:29:49 nsh Exp $
*
* i2c tv tuner chip device driver
* controls microtune tuners, mt2032 + mt2050 at the moment.
@@ -295,8 +295,8 @@ static void mt2032_set_radio_freq(struct i2c_client *c, unsigned int freq)
int if2 = t->radio_if2;
// per Manual for FM tuning: first if center freq. 1085 MHz
- mt2032_set_if_freq(c, freq*62500 /* freq*1000*1000/16 */,
- 1085*1000*1000,if2,if2,if2);
+ mt2032_set_if_freq(c, freq * 1000 / 16,
+ 1085*1000*1000,if2,if2,if2);
}
// Initalization as described in "MT203x Programming Procedures", Rev 1.2, Feb.2001
diff --git a/drivers/media/video/tda8290.c b/drivers/media/video/tda8290.c
index b27cc348d95c..f59d4601cc63 100644
--- a/drivers/media/video/tda8290.c
+++ b/drivers/media/video/tda8290.c
@@ -1,5 +1,5 @@
/*
- * $Id: tda8290.c,v 1.7 2005/03/07 12:01:51 kraxel Exp $
+ * $Id: tda8290.c,v 1.11 2005/06/18 06:09:06 nsh Exp $
*
* i2c tv tuner chip device driver
* controls the philips tda8290+75 tuner chip combo.
@@ -69,7 +69,7 @@ static __u8 get_freq_entry( struct freq_entry* table, __u16 freq)
static unsigned char i2c_enable_bridge[2] = { 0x21, 0xC0 };
static unsigned char i2c_disable_bridge[2] = { 0x21, 0x80 };
static unsigned char i2c_init_tda8275[14] = { 0x00, 0x00, 0x00, 0x00,
- 0x7C, 0x04, 0xA3, 0x3F,
+ 0xfC, 0x04, 0xA3, 0x3F,
0x2A, 0x04, 0xFF, 0x00,
0x00, 0x40 };
static unsigned char i2c_set_VS[2] = { 0x30, 0x6F };
@@ -138,16 +138,24 @@ static int tda8290_tune(struct i2c_client *c)
static void set_frequency(struct tuner *t, u16 ifc)
{
- u32 N = (((t->freq<<3)+ifc)&0x3fffc);
+ u32 freq;
+ u32 N;
- N = N >> get_freq_entry(div_table, t->freq);
+ if (t->mode == V4L2_TUNER_RADIO)
+ freq = t->freq / 1000;
+ else
+ freq = t->freq;
+
+ N = (((freq<<3)+ifc)&0x3fffc);
+
+ N = N >> get_freq_entry(div_table, freq);
t->i2c_set_freq[0] = 0;
t->i2c_set_freq[1] = (unsigned char)(N>>8);
t->i2c_set_freq[2] = (unsigned char) N;
t->i2c_set_freq[3] = 0x40;
t->i2c_set_freq[4] = 0x52;
- t->i2c_set_freq[5] = get_freq_entry(band_table, t->freq);
- t->i2c_set_freq[6] = get_freq_entry(agc_table, t->freq);
+ t->i2c_set_freq[5] = get_freq_entry(band_table, freq);
+ t->i2c_set_freq[6] = get_freq_entry(agc_table, freq);
t->i2c_set_freq[7] = 0x8f;
}
diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c
index 39773633cc3c..ee35562f4d1a 100644
--- a/drivers/media/video/tda9887.c
+++ b/drivers/media/video/tda9887.c
@@ -368,7 +368,7 @@ static int tda9887_set_tvnorm(struct tda9887 *t, char *buf)
if (t->radio_mode == V4L2_TUNER_MODE_MONO)
norm = &radio_mono;
else
- norm = &radio_stereo;
+ norm = &radio_stereo;
} else {
for (i = 0; i < ARRAY_SIZE(tvnorms); i++) {
if (tvnorms[i].std & t->std) {
@@ -566,7 +566,6 @@ static int tda9887_configure(struct tda9887 *t)
if (UNSET != t->pinnacle_id) {
tda9887_set_pinnacle(t,buf);
}
-
tda9887_set_config(t,buf);
tda9887_set_insmod(t,buf);
@@ -615,8 +614,8 @@ static int tda9887_attach(struct i2c_adapter *adap, int addr, int kind)
t->pinnacle_id = UNSET;
t->radio_mode = V4L2_TUNER_MODE_STEREO;
- i2c_set_clientdata(&t->client, t);
- i2c_attach_client(&t->client);
+ i2c_set_clientdata(&t->client, t);
+ i2c_attach_client(&t->client);
return 0;
}
diff --git a/drivers/media/video/tea5767.c b/drivers/media/video/tea5767.c
new file mode 100644
index 000000000000..a29f08f81f63
--- /dev/null
+++ b/drivers/media/video/tea5767.c
@@ -0,0 +1,334 @@
+/*
+ * For Philips TEA5767 FM Chip used on some TV Cards like Prolink Pixelview
+ * I2C address is allways 0xC0.
+ *
+ * $Id: tea5767.c,v 1.11 2005/06/21 15:40:33 mchehab Exp $
+ *
+ * Copyright (c) 2005 Mauro Carvalho Chehab (mchehab@brturbo.com.br)
+ * This code is placed under the terms of the GNU General Public License
+ *
+ * tea5767 autodetection thanks to Torsten Seeboth and Atsushi Nakagawa
+ * from their contributions on DScaler.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/videodev.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+
+#include <media/tuner.h>
+
+/* Declared at tuner-core.c */
+extern unsigned int tuner_debug;
+
+#define PREFIX "TEA5767 "
+
+/*****************************************************************************/
+
+/******************************
+ * Write mode register values *
+ ******************************/
+
+/* First register */
+#define TEA5767_MUTE 0x80 /* Mutes output */
+#define TEA5767_SEARCH 0x40 /* Activates station search */
+/* Bits 0-5 for divider MSB */
+
+/* Second register */
+/* Bits 0-7 for divider LSB */
+
+/* Third register */
+
+/* Station search from botton to up */
+#define TEA5767_SEARCH_UP 0x80
+
+/* Searches with ADC output = 10 */
+#define TEA5767_SRCH_HIGH_LVL 0x60
+
+/* Searches with ADC output = 10 */
+#define TEA5767_SRCH_MID_LVL 0x40
+
+/* Searches with ADC output = 5 */
+#define TEA5767_SRCH_LOW_LVL 0x20
+
+/* if on, div=4*(Frf+Fif)/Fref otherwise, div=4*(Frf-Fif)/Freq) */
+#define TEA5767_HIGH_LO_INJECT 0x10
+
+/* Disable stereo */
+#define TEA5767_MONO 0x08
+
+/* Disable right channel and turns to mono */
+#define TEA5767_MUTE_RIGHT 0x04
+
+/* Disable left channel and turns to mono */
+#define TEA5767_MUTE_LEFT 0x02
+
+#define TEA5767_PORT1_HIGH 0x01
+
+/* Forth register */
+#define TEA5767_PORT2_HIGH 0x80
+/* Chips stops working. Only I2C bus remains on */
+#define TEA5767_STDBY 0x40
+
+/* Japan freq (76-108 MHz. If disabled, 87.5-108 MHz */
+#define TEA5767_JAPAN_BAND 0x20
+
+/* Unselected means 32.768 KHz freq as reference. Otherwise Xtal at 13 MHz */
+#define TEA5767_XTAL_32768 0x10
+
+/* Cuts weak signals */
+#define TEA5767_SOFT_MUTE 0x08
+
+/* Activates high cut control */
+#define TEA5767_HIGH_CUT_CTRL 0x04
+
+/* Activates stereo noise control */
+#define TEA5767_ST_NOISE_CTL 0x02
+
+/* If activate PORT 1 indicates SEARCH or else it is used as PORT1 */
+#define TEA5767_SRCH_IND 0x01
+
+/* Fiveth register */
+
+/* By activating, it will use Xtal at 13 MHz as reference for divider */
+#define TEA5767_PLLREF_ENABLE 0x80
+
+/* By activating, deemphasis=50, or else, deemphasis of 50us */
+#define TEA5767_DEEMPH_75 0X40
+
+/*****************************
+ * Read mode register values *
+ *****************************/
+
+/* First register */
+#define TEA5767_READY_FLAG_MASK 0x80
+#define TEA5767_BAND_LIMIT_MASK 0X40
+/* Bits 0-5 for divider MSB after search or preset */
+
+/* Second register */
+/* Bits 0-7 for divider LSB after search or preset */
+
+/* Third register */
+#define TEA5767_STEREO_MASK 0x80
+#define TEA5767_IF_CNTR_MASK 0x7f
+
+/* Four register */
+#define TEA5767_ADC_LEVEL_MASK 0xf0
+
+/* should be 0 */
+#define TEA5767_CHIP_ID_MASK 0x0f
+
+/* Fiveth register */
+/* Reserved for future extensions */
+#define TEA5767_RESERVED_MASK 0xff
+
+/*****************************************************************************/
+
+static void set_tv_freq(struct i2c_client *c, unsigned int freq)
+{
+ struct tuner *t = i2c_get_clientdata(c);
+
+ tuner_warn("This tuner doesn't support TV freq.\n");
+}
+
+static void tea5767_status_dump(unsigned char *buffer)
+{
+ unsigned int div, frq;
+
+ if (TEA5767_READY_FLAG_MASK & buffer[0])
+ printk(PREFIX "Ready Flag ON\n");
+ else
+ printk(PREFIX "Ready Flag OFF\n");
+
+ if (TEA5767_BAND_LIMIT_MASK & buffer[0])
+ printk(PREFIX "Tuner at band limit\n");
+ else
+ printk(PREFIX "Tuner not at band limit\n");
+
+ div=((buffer[0]&0x3f)<<8) | buffer[1];
+
+ switch (TEA5767_HIGH_LO_32768) {
+ case TEA5767_HIGH_LO_13MHz:
+ frq = 1000*(div*50-700-225)/4; /* Freq in KHz */
+ break;
+ case TEA5767_LOW_LO_13MHz:
+ frq = 1000*(div*50+700+225)/4; /* Freq in KHz */
+ break;
+ case TEA5767_LOW_LO_32768:
+ frq = 1000*(div*32768/1000+700+225)/4; /* Freq in KHz */
+ break;
+ case TEA5767_HIGH_LO_32768:
+ default:
+ frq = 1000*(div*32768/1000-700-225)/4; /* Freq in KHz */
+ break;
+ }
+ buffer[0] = (div>>8) & 0x3f;
+ buffer[1] = div & 0xff;
+
+ printk(PREFIX "Frequency %d.%03d KHz (divider = 0x%04x)\n",
+ frq/1000,frq%1000,div);
+
+ if (TEA5767_STEREO_MASK & buffer[2])
+ printk(PREFIX "Stereo\n");
+ else
+ printk(PREFIX "Mono\n");
+
+ printk(PREFIX "IF Counter = %d\n",buffer[2] & TEA5767_IF_CNTR_MASK);
+
+ printk(PREFIX "ADC Level = %d\n",(buffer[3] & TEA5767_ADC_LEVEL_MASK)>>4);
+
+ printk(PREFIX "Chip ID = %d\n",(buffer[3] & TEA5767_CHIP_ID_MASK));
+
+ printk(PREFIX "Reserved = 0x%02x\n",(buffer[4] & TEA5767_RESERVED_MASK));
+}
+
+/* Freq should be specifyed at 62.5 Hz */
+static void set_radio_freq(struct i2c_client *c, unsigned int frq)
+{
+ struct tuner *t = i2c_get_clientdata(c);
+ unsigned char buffer[5];
+ unsigned div;
+ int rc;
+
+ if ( tuner_debug )
+ printk(PREFIX "radio freq counter %d\n",frq);
+
+ /* Rounds freq to next decimal value - for 62.5 KHz step */
+ /* frq = 20*(frq/16)+radio_frq[frq%16]; */
+
+ buffer[2] = TEA5767_PORT1_HIGH;
+ buffer[3] = TEA5767_PORT2_HIGH | TEA5767_HIGH_CUT_CTRL | TEA5767_ST_NOISE_CTL | TEA5767_JAPAN_BAND;
+ buffer[4]=0;
+
+ if (t->audmode == V4L2_TUNER_MODE_MONO) {
+ tuner_dbg("TEA5767 set to mono\n");
+ buffer[2] |= TEA5767_MONO;
+ } else
+ tuner_dbg("TEA5767 set to stereo\n");
+
+ switch (t->type) {
+ case TEA5767_HIGH_LO_13MHz:
+ tuner_dbg("TEA5767 radio HIGH LO inject xtal @ 13 MHz\n");
+ buffer[2] |= TEA5767_HIGH_LO_INJECT;
+ buffer[4] |= TEA5767_PLLREF_ENABLE;
+ div = (frq*4/16+700+225+25)/50;
+ break;
+ case TEA5767_LOW_LO_13MHz:
+ tuner_dbg("TEA5767 radio LOW LO inject xtal @ 13 MHz\n");
+
+ buffer[4] |= TEA5767_PLLREF_ENABLE;
+ div = (frq*4/16-700-225+25)/50;
+ break;
+ case TEA5767_LOW_LO_32768:
+ tuner_dbg("TEA5767 radio LOW LO inject xtal @ 32,768 MHz\n");
+ buffer[3] |= TEA5767_XTAL_32768;
+ /* const 700=4000*175 Khz - to adjust freq to right value */
+ div = (1000*(frq*4/16-700-225)+16384)>>15;
+ break;
+ case TEA5767_HIGH_LO_32768:
+ default:
+ tuner_dbg("TEA5767 radio HIGH LO inject xtal @ 32,768 MHz\n");
+
+ buffer[2] |= TEA5767_HIGH_LO_INJECT;
+ buffer[3] |= TEA5767_XTAL_32768;
+ div = (1000*(frq*4/16+700+225)+16384)>>15;
+ break;
+ }
+ buffer[0] = (div>>8) & 0x3f;
+ buffer[1] = div & 0xff;
+
+ if ( tuner_debug )
+ tea5767_status_dump(buffer);
+
+ if (5 != (rc = i2c_master_send(c,buffer,5)))
+ tuner_warn("i2c i/o error: rc == %d (should be 5)\n",rc);
+}
+
+static int tea5767_signal(struct i2c_client *c)
+{
+ unsigned char buffer[5];
+ int rc;
+ struct tuner *t = i2c_get_clientdata(c);
+
+ memset(buffer,0,sizeof(buffer));
+ if (5 != (rc = i2c_master_recv(c,buffer,5)))
+ tuner_warn ( "i2c i/o error: rc == %d (should be 5)\n",rc);
+
+ return ((buffer[3] & TEA5767_ADC_LEVEL_MASK) <<(13-4));
+}
+
+static int tea5767_stereo(struct i2c_client *c)
+{
+ unsigned char buffer[5];
+ int rc;
+ struct tuner *t = i2c_get_clientdata(c);
+
+ memset(buffer,0,sizeof(buffer));
+ if (5 != (rc = i2c_master_recv(c,buffer,5)))
+ tuner_warn ( "i2c i/o error: rc == %d (should be 5)\n",rc);
+
+ rc = buffer[2] & TEA5767_STEREO_MASK;
+
+ if ( tuner_debug )
+ tuner_dbg("TEA5767 radio ST GET = %02x\n", rc);
+
+ return ( (buffer[2] & TEA5767_STEREO_MASK) ? V4L2_TUNER_SUB_STEREO: 0);
+}
+
+int tea_detection(struct i2c_client *c)
+{
+ unsigned char buffer[5]= { 0xff, 0xff, 0xff, 0xff, 0xff };
+ int rc;
+ struct tuner *t = i2c_get_clientdata(c);
+
+ if (5 != (rc = i2c_master_recv(c,buffer,5))) {
+ tuner_warn ( "it is not a TEA5767. Received %i chars.\n",rc );
+ return EINVAL;
+ }
+
+ /* If all bytes are the same then it's a TV tuner and not a tea5767 chip. */
+ if (buffer[0] == buffer[1] && buffer[0] == buffer[2] &&
+ buffer[0] == buffer[3] && buffer[0] == buffer[4]) {
+ tuner_warn ( "All bytes are equal. It is not a TEA5767\n" );
+ return EINVAL;
+ }
+
+ /* Status bytes:
+ * Byte 4: bit 3:1 : CI (Chip Identification) == 0
+ * bit 0 : internally set to 0
+ * Byte 5: bit 7:0 : == 0
+ */
+
+ if (!((buffer[3] & 0x0f) == 0x00) && (buffer[4] == 0x00)) {
+ tuner_warn ( "Chip ID is not zero. It is not a TEA5767\n" );
+ return EINVAL;
+ }
+ tuner_warn ( "TEA5767 detected.\n" );
+ return 0;
+}
+
+int tea5767_tuner_init(struct i2c_client *c)
+{
+ struct tuner *t = i2c_get_clientdata(c);
+
+ if (tea_detection(c)==EINVAL) return EINVAL;
+
+ tuner_info("type set to %d (%s)\n",
+ t->type, TEA5767_TUNER_NAME);
+ strlcpy(c->name, TEA5767_TUNER_NAME, sizeof(c->name));
+
+ t->tv_freq = set_tv_freq;
+ t->radio_freq = set_radio_freq;
+ t->has_signal = tea5767_signal;
+ t->is_stereo = tea5767_stereo;
+
+ return (0);
+}
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index eaabfc858703..6f6bf4a633fc 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -1,5 +1,5 @@
/*
- * $Id: tuner-core.c,v 1.15 2005/06/12 01:36:14 mchehab Exp $
+ * $Id: tuner-core.c,v 1.29 2005/06/21 15:40:33 mchehab Exp $
*
* i2c tv tuner chip device driver
* core core, i.e. kernel interfaces, registering and so on
@@ -26,7 +26,6 @@
/*
* comment line bellow to return to old behavor, where only one I2C device is supported
*/
-#define CONFIG_TUNER_MULTI_I2C /**/
#define UNSET (-1U)
@@ -58,9 +57,7 @@ MODULE_AUTHOR("Ralph Metzler, Gerd Knorr, Gunther Mayer");
MODULE_LICENSE("GPL");
static int this_adap;
-#ifdef CONFIG_TUNER_MULTI_I2C
static unsigned short first_tuner, tv_tuner, radio_tuner;
-#endif
static struct i2c_driver driver;
static struct i2c_client client_template;
@@ -81,26 +78,9 @@ static void set_tv_freq(struct i2c_client *c, unsigned int freq)
return;
}
if (freq < tv_range[0]*16 || freq > tv_range[1]*16) {
-
- if (freq >= tv_range[0]*16364 && freq <= tv_range[1]*16384) {
- /* V4L2_TUNER_CAP_LOW frequency */
-
- tuner_dbg("V4L2_TUNER_CAP_LOW freq selected for TV. Tuners yet doesn't support converting it to valid freq.\n");
-
- t->tv_freq(c,freq>>10);
-
- return;
- } else {
- /* FIXME: better do that chip-specific, but
- right now we don't have that in the config
- struct and this way is still better than no
- check at all */
tuner_info("TV freq (%d.%02d) out of range (%d-%d)\n",
freq/16,freq%16*100/16,tv_range[0],tv_range[1]);
- return;
- }
}
- tuner_dbg("62.5 Khz freq step selected for TV.\n");
t->tv_freq(c,freq);
}
@@ -116,31 +96,18 @@ static void set_radio_freq(struct i2c_client *c, unsigned int freq)
tuner_info("no radio tuning for this one, sorry.\n");
return;
}
- if (freq < radio_range[0]*16 || freq > radio_range[1]*16) {
- if (freq >= tv_range[0]*16364 && freq <= tv_range[1]*16384) {
- /* V4L2_TUNER_CAP_LOW frequency */
- if (t->type == TUNER_TEA5767) {
- tuner_info("radio freq step 62.5Hz (%d.%06d)\n",(freq>>14),freq%(1<<14)*10000);
- t->radio_freq(c,freq>>10);
- return;
- }
-
- tuner_dbg("V4L2_TUNER_CAP_LOW freq selected for Radio. Tuners yet doesn't support converting it to valid freq.\n");
-
- tuner_info("radio freq (%d.%06d)\n",(freq>>14),freq%(1<<14)*10000);
-
- t->radio_freq(c,freq>>10);
- return;
-
- } else {
- tuner_info("radio freq (%d.%02d) out of range (%d-%d)\n",
- freq/16,freq%16*100/16,
- radio_range[0],radio_range[1]);
- return;
- }
+ if (freq >= radio_range[0]*16000 && freq <= radio_range[1]*16000) {
+ if (tuner_debug)
+ tuner_info("radio freq step 62.5Hz (%d.%06d)\n",
+ freq/16000,freq%16000*1000/16);
+ t->radio_freq(c,freq);
+ } else {
+ tuner_info("radio freq (%d.%02d) out of range (%d-%d)\n",
+ freq/16,freq%16*100/16,
+ radio_range[0],radio_range[1]);
}
- tuner_dbg("62.5 Khz freq step selected for Radio.\n");
- t->radio_freq(c,freq);
+
+ return;
}
static void set_freq(struct i2c_client *c, unsigned long freq)
@@ -166,8 +133,8 @@ static void set_freq(struct i2c_client *c, unsigned long freq)
static void set_type(struct i2c_client *c, unsigned int type)
{
struct tuner *t = i2c_get_clientdata(c);
+ unsigned char buffer[4];
- tuner_dbg ("I2C addr 0x%02x with type %d\n",c->addr<<1,type);
/* sanity check */
if (type == UNSET || type == TUNER_ABSENT)
return;
@@ -179,8 +146,8 @@ static void set_type(struct i2c_client *c, unsigned int type)
t->type = type;
return;
}
- if (t->initialized)
- /* run only once */
+ if ((t->initialized) && (t->type == type))
+ /* run only once except type change Hac 04/05*/
return;
t->initialized = 1;
@@ -193,25 +160,42 @@ static void set_type(struct i2c_client *c, unsigned int type)
case TUNER_PHILIPS_TDA8290:
tda8290_init(c);
break;
+ case TUNER_TEA5767:
+ if (tea5767_tuner_init(c)==EINVAL) t->type=TUNER_ABSENT;
+ break;
+ case TUNER_PHILIPS_FMD1216ME_MK3:
+ buffer[0] = 0x0b;
+ buffer[1] = 0xdc;
+ buffer[2] = 0x9c;
+ buffer[3] = 0x60;
+ i2c_master_send(c,buffer,4);
+ mdelay(1);
+ buffer[2] = 0x86;
+ buffer[3] = 0x54;
+ i2c_master_send(c,buffer,4);
+ default_tuner_init(c);
+ break;
default:
+ /* TEA5767 autodetection code */
+ if (tea5767_tuner_init(c)!=EINVAL) {
+ t->type = TUNER_TEA5767;
+ if (first_tuner == 0x60)
+ first_tuner++;
+ break;
+ }
+
default_tuner_init(c);
break;
}
+ tuner_dbg ("I2C addr 0x%02x with type %d\n",c->addr<<1,type);
}
-#ifdef CONFIG_TUNER_MULTI_I2C
#define CHECK_ADDR(tp,cmd,tun) if (client->addr!=tp) { \
- return 0; } else \
+ return 0; } else if (tuner_debug) \
tuner_info ("Cmd %s accepted to "tun"\n",cmd);
#define CHECK_MODE(cmd) if (t->mode == V4L2_TUNER_RADIO) { \
CHECK_ADDR(radio_tuner,cmd,"radio") } else \
{ CHECK_ADDR(tv_tuner,cmd,"TV"); }
-#else
-#define CHECK_ADDR(tp,cmd,tun) tuner_info ("Cmd %s accepted to "tun"\n",cmd);
-#define CHECK_MODE(cmd) tuner_info ("Cmd %s accepted\n",cmd);
-#endif
-
-#ifdef CONFIG_TUNER_MULTI_I2C
static void set_addr(struct i2c_client *c, struct tuner_addr *tun_addr)
{
@@ -242,9 +226,6 @@ static void set_addr(struct i2c_client *c, struct tuner_addr *tun_addr)
}
set_type(c,tun_addr->type);
}
-#else
-#define set_addr(c,tun_addr) set_type(c,(tun_addr)->type)
-#endif
static char pal[] = "-";
module_param_string(pal, pal, sizeof(pal), 0644);
@@ -284,17 +265,12 @@ static int tuner_attach(struct i2c_adapter *adap, int addr, int kind)
{
struct tuner *t;
-#ifndef CONFIG_TUNER_MULTI_I2C
- if (this_adap > 0)
- return -1;
-#else
/* by default, first I2C card is both tv and radio tuner */
if (this_adap == 0) {
first_tuner = addr;
tv_tuner = addr;
radio_tuner = addr;
}
-#endif
this_adap++;
client_template.adapter = adap;
@@ -308,6 +284,7 @@ static int tuner_attach(struct i2c_adapter *adap, int addr, int kind)
i2c_set_clientdata(&t->i2c, t);
t->type = UNSET;
t->radio_if2 = 10700*1000; /* 10.7MHz - FM radio */
+ t->audmode = V4L2_TUNER_MODE_STEREO;
i2c_attach_client(&t->i2c);
tuner_info("chip found @ 0x%x (%s)\n",
@@ -325,11 +302,9 @@ static int tuner_probe(struct i2c_adapter *adap)
}
this_adap = 0;
-#ifdef CONFIG_TUNER_MULTI_I2C
first_tuner = 0;
tv_tuner = 0;
radio_tuner = 0;
-#endif
if (adap->class & I2C_CLASS_TV_ANALOG)
return i2c_probe(adap, &addr_data, tuner_attach);
@@ -392,8 +367,7 @@ tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
t->radio_if2 = 41300 * 1000;
break;
}
- break;
-
+ break;
/* --- v4l ioctls --- */
/* take care: bttv does userspace copying, we'll get a
kernel pointer here... */
@@ -440,11 +414,18 @@ tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
vt->signal = t->has_signal(client);
if (t->is_stereo) {
if (t->is_stereo(client))
- vt-> flags |= VIDEO_TUNER_STEREO_ON;
+ vt->flags |= VIDEO_TUNER_STEREO_ON;
else
- vt-> flags &= 0xffff ^ VIDEO_TUNER_STEREO_ON;
+ vt->flags &= ~VIDEO_TUNER_STEREO_ON;
}
vt->flags |= V4L2_TUNER_CAP_LOW; /* Allow freqs at 62.5 Hz */
+
+ vt->rangelow = radio_range[0] * 16000;
+ vt->rangehigh = radio_range[1] * 16000;
+
+ } else {
+ vt->rangelow = tv_range[0] * 16;
+ vt->rangehigh = tv_range[1] * 16;
}
return 0;
@@ -510,20 +491,46 @@ tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
tuner -> signal = t->has_signal(client);
if (t->is_stereo) {
if (t->is_stereo(client)) {
- tuner -> capability |= V4L2_TUNER_CAP_STEREO;
- tuner -> rxsubchans |= V4L2_TUNER_SUB_STEREO;
+ tuner -> rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_MONO;
} else {
- tuner -> rxsubchans &= 0xffff ^ V4L2_TUNER_SUB_STEREO;
+ tuner -> rxsubchans = V4L2_TUNER_SUB_MONO;
}
}
+ tuner->capability |= V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO;
+ tuner->audmode = t->audmode;
+
+ tuner->rangelow = radio_range[0] * 16000;
+ tuner->rangehigh = radio_range[1] * 16000;
+ } else {
+ tuner->rangelow = tv_range[0] * 16;
+ tuner->rangehigh = tv_range[1] * 16;
}
- /* Wow to deal with V4L2_TUNER_CAP_LOW ? For now, it accepts from low at 62.5KHz step to high at 62.5 Hz */
- tuner->rangelow = tv_range[0] * 16;
-// tuner->rangehigh = tv_range[1] * 16;
-// tuner->rangelow = tv_range[0] * 16384;
- tuner->rangehigh = tv_range[1] * 16384;
break;
}
+ case VIDIOC_S_TUNER: /* Allow changing radio range and audio mode */
+ {
+ struct v4l2_tuner *tuner = arg;
+
+ CHECK_ADDR(radio_tuner,"VIDIOC_S_TUNER","radio");
+ SWITCH_V4L2;
+
+ /* To switch the audio mode, applications initialize the
+ index and audmode fields and the reserved array and
+ call the VIDIOC_S_TUNER ioctl. */
+ /* rxsubchannels: V4L2_TUNER_MODE_MONO, V4L2_TUNER_MODE_STEREO,
+ V4L2_TUNER_MODE_LANG1, V4L2_TUNER_MODE_LANG2,
+ V4L2_TUNER_MODE_SAP */
+
+ if (tuner->audmode == V4L2_TUNER_MODE_MONO)
+ t->audmode = V4L2_TUNER_MODE_MONO;
+ else
+ t->audmode = V4L2_TUNER_MODE_STEREO;
+
+ set_radio_freq(client, t->freq);
+ break;
+ }
+ case TDA9887_SET_CONFIG: /* Nothing to do on tuner-core */
+ break;
default:
tuner_dbg ("Unimplemented IOCTL 0x%08x called to tuner.\n", cmd);
/* nothing */
diff --git a/drivers/media/video/tuner-simple.c b/drivers/media/video/tuner-simple.c
index 539f30557317..c39ed6226ee0 100644
--- a/drivers/media/video/tuner-simple.c
+++ b/drivers/media/video/tuner-simple.c
@@ -1,5 +1,5 @@
/*
- * $Id: tuner-simple.c,v 1.21 2005/06/10 19:53:26 nsh Exp $
+ * $Id: tuner-simple.c,v 1.31 2005/06/21 16:02:25 mkrufky Exp $
*
* i2c tv tuner chip device driver
* controls all those simple 4-control-bytes style tuners.
@@ -207,28 +207,27 @@ static struct tunertype tuners[] = {
{ "LG PAL (TAPE series)", LGINNOTEK, PAL,
16*170.00, 16*450.00, 0x01,0x02,0x08,0xce,623},
- { "Philips PAL/SECAM multi (FQ1216AME MK4)", Philips, PAL,
- 16*160.00,16*442.00,0x01,0x02,0x04,0xce,623 },
- { "Philips FQ1236A MK4", Philips, NTSC,
- 16*160.00,16*442.00,0x01,0x02,0x04,0x8e,732 },
+ { "Philips PAL/SECAM multi (FQ1216AME MK4)", Philips, PAL,
+ 16*160.00,16*442.00,0x01,0x02,0x04,0xce,623 },
+ { "Philips FQ1236A MK4", Philips, NTSC,
+ 16*160.00,16*442.00,0x01,0x02,0x04,0x8e,732 },
/* Should work for TVF8531MF, TVF8831MF, TVF8731MF */
{ "Ymec TVision TVF-8531MF", Philips, NTSC,
16*160.00,16*454.00,0xa0,0x90,0x30,0x8e,732},
{ "Ymec TVision TVF-5533MF", Philips, NTSC,
16*160.00,16*454.00,0x01,0x02,0x04,0x8e,732},
-
{ "Thomson DDT 7611 (ATSC/NTSC)", THOMSON, ATSC,
16*157.25,16*454.00,0x39,0x3a,0x3c,0x8e,732},
- { "Tena TNF9533-D/IF", LGINNOTEK, PAL,
- 16*160.25, 16*464.25, 0x01,0x02,0x08,0x8e,623},
+ /* Should work for TNF9533-D/IF, TNF9533-B/DF */
+ { "Tena TNF9533-D/IF", Philips, PAL,
+ 16*160.25,16*464.25,0x01,0x02,0x04,0x8e,623},
- /*
- * This entry is for TEA5767 FM radio only chip used on several boards
- * w/TV tuner
- */
+ /* This entry is for TEA5767 FM radio only chip used on several boards w/TV tuner */
{ TEA5767_TUNER_NAME, Philips, RADIO,
- -1, -1, 0, 0, 0, TEA5767_LOW_LO_32768,0},
+ -1, -1, 0, 0, 0, TEA5767_LOW_LO_32768,0},
+ { "Philips FMD1216ME MK3 Hybrid Tuner", Philips, PAL,
+ 16*160.00,16*442.00,0x51,0x52,0x54,0x86,623 },
};
unsigned const int tuner_count = ARRAY_SIZE(tuners);
@@ -455,24 +454,24 @@ static void default_set_radio_freq(struct i2c_client *c, unsigned int freq)
int rc;
tun=&tuners[t->type];
- div = freq + (int)(16*10.7);
+ div = (freq / 1000) + (int)(16*10.7);
buffer[2] = tun->config;
switch (t->type) {
case TUNER_TENA_9533_DI:
case TUNER_YMEC_TVF_5533MF:
-
/*These values are empirically determinated */
- div = (freq*122)/16 - 20;
+ div = (freq * 122) / 16000 - 20;
buffer[2] = 0x88; /* could be also 0x80 */
buffer[3] = 0x19; /* could be also 0x10, 0x18, 0x99 */
break;
case TUNER_PHILIPS_FM1216ME_MK3:
case TUNER_PHILIPS_FM1236_MK3:
+ case TUNER_PHILIPS_FMD1216ME_MK3:
buffer[3] = 0x19;
break;
case TUNER_PHILIPS_FM1256_IH3:
- div = (20 * freq)/16 + 333 * 2;
+ div = (20 * freq) / 16000 + 333 * 2;
buffer[2] = 0x80;
buffer[3] = 0x19;
break;
@@ -505,6 +504,7 @@ int default_tuner_init(struct i2c_client *c)
t->radio_freq = default_set_radio_freq;
t->has_signal = tuner_signal;
t->is_stereo = tuner_stereo;
+
return 0;
}
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 06:47:10 +0000