diff options
Diffstat (limited to 'drivers/staging/octeon/ethernet-tx.c')
| -rw-r--r-- | drivers/staging/octeon/ethernet-tx.c | 634 |
1 files changed, 634 insertions, 0 deletions
diff --git a/drivers/staging/octeon/ethernet-tx.c b/drivers/staging/octeon/ethernet-tx.c new file mode 100644 index 000000000000..77b7122c8fdb --- /dev/null +++ b/drivers/staging/octeon/ethernet-tx.c @@ -0,0 +1,634 @@ +/********************************************************************* + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2007 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information +*********************************************************************/ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/netdevice.h> +#include <linux/init.h> +#include <linux/etherdevice.h> +#include <linux/ip.h> +#include <linux/string.h> +#include <linux/ethtool.h> +#include <linux/mii.h> +#include <linux/seq_file.h> +#include <linux/proc_fs.h> +#include <net/dst.h> +#ifdef CONFIG_XFRM +#include <linux/xfrm.h> +#include <net/xfrm.h> +#endif /* CONFIG_XFRM */ + +#include <asm/atomic.h> + +#include <asm/octeon/octeon.h> + +#include "ethernet-defines.h" +#include "octeon-ethernet.h" +#include "ethernet-util.h" + +#include "cvmx-wqe.h" +#include "cvmx-fau.h" +#include "cvmx-pko.h" +#include "cvmx-helper.h" + +#include "cvmx-gmxx-defs.h" + +/* + * You can define GET_SKBUFF_QOS() to override how the skbuff output + * function determines which output queue is used. The default + * implementation always uses the base queue for the port. If, for + * example, you wanted to use the skb->priority fieid, define + * GET_SKBUFF_QOS as: #define GET_SKBUFF_QOS(skb) ((skb)->priority) + */ +#ifndef GET_SKBUFF_QOS +#define GET_SKBUFF_QOS(skb) 0 +#endif + +/** + * Packet transmit + * + * @skb: Packet to send + * @dev: Device info structure + * Returns Always returns zero + */ +int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev) +{ + cvmx_pko_command_word0_t pko_command; + union cvmx_buf_ptr hw_buffer; + uint64_t old_scratch; + uint64_t old_scratch2; + int dropped; + int qos; + struct octeon_ethernet *priv = netdev_priv(dev); + int32_t in_use; + int32_t buffers_to_free; +#if REUSE_SKBUFFS_WITHOUT_FREE + unsigned char *fpa_head; +#endif + + /* + * Prefetch the private data structure. It is larger that one + * cache line. + */ + prefetch(priv); + + /* Start off assuming no drop */ + dropped = 0; + + /* + * The check on CVMX_PKO_QUEUES_PER_PORT_* is designed to + * completely remove "qos" in the event neither interface + * supports multiple queues per port. + */ + if ((CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 > 1) || + (CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 > 1)) { + qos = GET_SKBUFF_QOS(skb); + if (qos <= 0) + qos = 0; + else if (qos >= cvmx_pko_get_num_queues(priv->port)) + qos = 0; + } else + qos = 0; + + if (USE_ASYNC_IOBDMA) { + /* Save scratch in case userspace is using it */ + CVMX_SYNCIOBDMA; + old_scratch = cvmx_scratch_read64(CVMX_SCR_SCRATCH); + old_scratch2 = cvmx_scratch_read64(CVMX_SCR_SCRATCH + 8); + + /* + * Assume we're going to be able t osend this + * packet. Fetch and increment the number of pending + * packets for output. + */ + cvmx_fau_async_fetch_and_add32(CVMX_SCR_SCRATCH + 8, + FAU_NUM_PACKET_BUFFERS_TO_FREE, + 0); + cvmx_fau_async_fetch_and_add32(CVMX_SCR_SCRATCH, + priv->fau + qos * 4, 1); + } + + /* + * The CN3XXX series of parts has an errata (GMX-401) which + * causes the GMX block to hang if a collision occurs towards + * the end of a <68 byte packet. As a workaround for this, we + * pad packets to be 68 bytes whenever we are in half duplex + * mode. We don't handle the case of having a small packet but + * no room to add the padding. The kernel should always give + * us at least a cache line + */ + if ((skb->len < 64) && OCTEON_IS_MODEL(OCTEON_CN3XXX)) { + union cvmx_gmxx_prtx_cfg gmx_prt_cfg; + int interface = INTERFACE(priv->port); + int index = INDEX(priv->port); + + if (interface < 2) { + /* We only need to pad packet in half duplex mode */ + gmx_prt_cfg.u64 = + cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); + if (gmx_prt_cfg.s.duplex == 0) { + int add_bytes = 64 - skb->len; + if ((skb_tail_pointer(skb) + add_bytes) <= + skb_end_pointer(skb)) + memset(__skb_put(skb, add_bytes), 0, + add_bytes); + } + } + } + + /* Build the PKO buffer pointer */ + hw_buffer.u64 = 0; + hw_buffer.s.addr = cvmx_ptr_to_phys(skb->data); + hw_buffer.s.pool = 0; + hw_buffer.s.size = + (unsigned long)skb_end_pointer(skb) - (unsigned long)skb->head; + + /* Build the PKO command */ + pko_command.u64 = 0; + pko_command.s.n2 = 1; /* Don't pollute L2 with the outgoing packet */ + pko_command.s.segs = 1; + pko_command.s.total_bytes = skb->len; + pko_command.s.size0 = CVMX_FAU_OP_SIZE_32; + pko_command.s.subone0 = 1; + + pko_command.s.dontfree = 1; + pko_command.s.reg0 = priv->fau + qos * 4; + /* + * See if we can put this skb in the FPA pool. Any strange + * behavior from the Linux networking stack will most likely + * be caused by a bug in the following code. If some field is + * in use by the network stack and get carried over when a + * buffer is reused, bad thing may happen. If in doubt and + * you dont need the absolute best performance, disable the + * define REUSE_SKBUFFS_WITHOUT_FREE. The reuse of buffers has + * shown a 25% increase in performance under some loads. + */ +#if REUSE_SKBUFFS_WITHOUT_FREE + fpa_head = skb->head + 128 - ((unsigned long)skb->head & 0x7f); + if (unlikely(skb->data < fpa_head)) { + /* + * printk("TX buffer beginning can't meet FPA + * alignment constraints\n"); + */ + goto dont_put_skbuff_in_hw; + } + if (unlikely + ((skb_end_pointer(skb) - fpa_head) < CVMX_FPA_PACKET_POOL_SIZE)) { + /* + printk("TX buffer isn't large enough for the FPA\n"); + */ + goto dont_put_skbuff_in_hw; + } + if (unlikely(skb_shared(skb))) { + /* + printk("TX buffer sharing data with someone else\n"); + */ + goto dont_put_skbuff_in_hw; + } + if (unlikely(skb_cloned(skb))) { + /* + printk("TX buffer has been cloned\n"); + */ + goto dont_put_skbuff_in_hw; + } + if (unlikely(skb_header_cloned(skb))) { + /* + printk("TX buffer header has been cloned\n"); + */ + goto dont_put_skbuff_in_hw; + } + if (unlikely(skb->destructor)) { + /* + printk("TX buffer has a destructor\n"); + */ + goto dont_put_skbuff_in_hw; + } + if (unlikely(skb_shinfo(skb)->nr_frags)) { + /* + printk("TX buffer has fragments\n"); + */ + goto dont_put_skbuff_in_hw; + } + if (unlikely + (skb->truesize != + sizeof(*skb) + skb_end_pointer(skb) - skb->head)) { + /* + printk("TX buffer truesize has been changed\n"); + */ + goto dont_put_skbuff_in_hw; + } + + /* + * We can use this buffer in the FPA. We don't need the FAU + * update anymore + */ + pko_command.s.reg0 = 0; + pko_command.s.dontfree = 0; + + hw_buffer.s.back = (skb->data - fpa_head) >> 7; + *(struct sk_buff **)(fpa_head - sizeof(void *)) = skb; + + /* + * The skbuff will be reused without ever being freed. We must + * cleanup a bunch of Linux stuff. + */ + dst_release(skb->dst); + skb->dst = NULL; +#ifdef CONFIG_XFRM + secpath_put(skb->sp); + skb->sp = NULL; +#endif + nf_reset(skb); + +#ifdef CONFIG_NET_SCHED + skb->tc_index = 0; +#ifdef CONFIG_NET_CLS_ACT + skb->tc_verd = 0; +#endif /* CONFIG_NET_CLS_ACT */ +#endif /* CONFIG_NET_SCHED */ + +dont_put_skbuff_in_hw: +#endif /* REUSE_SKBUFFS_WITHOUT_FREE */ + + /* Check if we can use the hardware checksumming */ + if (USE_HW_TCPUDP_CHECKSUM && (skb->protocol == htons(ETH_P_IP)) && + (ip_hdr(skb)->version == 4) && (ip_hdr(skb)->ihl == 5) && + ((ip_hdr(skb)->frag_off == 0) || (ip_hdr(skb)->frag_off == 1 << 14)) + && ((ip_hdr(skb)->protocol == IP_PROTOCOL_TCP) + || (ip_hdr(skb)->protocol == IP_PROTOCOL_UDP))) { + /* Use hardware checksum calc */ + pko_command.s.ipoffp1 = sizeof(struct ethhdr) + 1; + } + + if (USE_ASYNC_IOBDMA) { + /* Get the number of skbuffs in use by the hardware */ + CVMX_SYNCIOBDMA; + in_use = cvmx_scratch_read64(CVMX_SCR_SCRATCH); + buffers_to_free = cvmx_scratch_read64(CVMX_SCR_SCRATCH + 8); + } else { + /* Get the number of skbuffs in use by the hardware */ + in_use = cvmx_fau_fetch_and_add32(priv->fau + qos * 4, 1); + buffers_to_free = + cvmx_fau_fetch_and_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE, 0); + } + + /* + * If we're sending faster than the receive can free them then + * don't do the HW free. + */ + if ((buffers_to_free < -100) && !pko_command.s.dontfree) { + pko_command.s.dontfree = 1; + pko_command.s.reg0 = priv->fau + qos * 4; + } + + cvmx_pko_send_packet_prepare(priv->port, priv->queue + qos, + CVMX_PKO_LOCK_CMD_QUEUE); + + /* Drop this packet if we have too many already queued to the HW */ + if (unlikely + (skb_queue_len(&priv->tx_free_list[qos]) >= MAX_OUT_QUEUE_DEPTH)) { + /* + DEBUGPRINT("%s: Tx dropped. Too many queued\n", dev->name); + */ + dropped = 1; + } + /* Send the packet to the output queue */ + else if (unlikely + (cvmx_pko_send_packet_finish + (priv->port, priv->queue + qos, pko_command, hw_buffer, + CVMX_PKO_LOCK_CMD_QUEUE))) { + DEBUGPRINT("%s: Failed to send the packet\n", dev->name); + dropped = 1; + } + + if (USE_ASYNC_IOBDMA) { + /* Restore the scratch area */ + cvmx_scratch_write64(CVMX_SCR_SCRATCH, old_scratch); + cvmx_scratch_write64(CVMX_SCR_SCRATCH + 8, old_scratch2); + } + + if (unlikely(dropped)) { + dev_kfree_skb_any(skb); + cvmx_fau_atomic_add32(priv->fau + qos * 4, -1); + priv->stats.tx_dropped++; + } else { + if (USE_SKBUFFS_IN_HW) { + /* Put this packet on the queue to be freed later */ + if (pko_command.s.dontfree) + skb_queue_tail(&priv->tx_free_list[qos], skb); + else { + cvmx_fau_atomic_add32 + (FAU_NUM_PACKET_BUFFERS_TO_FREE, -1); + cvmx_fau_atomic_add32(priv->fau + qos * 4, -1); + } + } else { + /* Put this packet on the queue to be freed later */ + skb_queue_tail(&priv->tx_free_list[qos], skb); + } + } + + /* Free skbuffs not in use by the hardware, possibly two at a time */ + if (skb_queue_len(&priv->tx_free_list[qos]) > in_use) { + spin_lock(&priv->tx_free_list[qos].lock); + /* + * Check again now that we have the lock. It might + * have changed. + */ + if (skb_queue_len(&priv->tx_free_list[qos]) > in_use) + dev_kfree_skb(__skb_dequeue(&priv->tx_free_list[qos])); + if (skb_queue_len(&priv->tx_free_list[qos]) > in_use) + dev_kfree_skb(__skb_dequeue(&priv->tx_free_list[qos])); + spin_unlock(&priv->tx_free_list[qos].lock); + } + + return 0; +} + +/** + * Packet transmit to the POW + * + * @skb: Packet to send + * @dev: Device info structure + * Returns Always returns zero + */ +int cvm_oct_xmit_pow(struct sk_buff *skb, struct net_device *dev) +{ + struct octeon_ethernet *priv = netdev_priv(dev); + void *packet_buffer; + void *copy_location; + + /* Get a work queue entry */ + cvmx_wqe_t *work = cvmx_fpa_alloc(CVMX_FPA_WQE_POOL); + if (unlikely(work == NULL)) { + DEBUGPRINT("%s: Failed to allocate a work queue entry\n", + dev->name); + priv->stats.tx_dropped++; + dev_kfree_skb(skb); + return 0; + } + + /* Get a packet buffer */ + packet_buffer = cvmx_fpa_alloc(CVMX_FPA_PACKET_POOL); + if (unlikely(packet_buffer == NULL)) { + DEBUGPRINT("%s: Failed to allocate a packet buffer\n", + dev->name); + cvmx_fpa_free(work, CVMX_FPA_WQE_POOL, DONT_WRITEBACK(1)); + priv->stats.tx_dropped++; + dev_kfree_skb(skb); + return 0; + } + + /* + * Calculate where we need to copy the data to. We need to + * leave 8 bytes for a next pointer (unused). We also need to + * include any configure skip. Then we need to align the IP + * packet src and dest into the same 64bit word. The below + * calculation may add a little extra, but that doesn't + * hurt. + */ + copy_location = packet_buffer + sizeof(uint64_t); + copy_location += ((CVMX_HELPER_FIRST_MBUFF_SKIP + 7) & 0xfff8) + 6; + + /* + * We have to copy the packet since whoever processes this + * packet will free it to a hardware pool. We can't use the + * trick of counting outstanding packets like in + * cvm_oct_xmit. + */ + memcpy(copy_location, skb->data, skb->len); + + /* + * Fill in some of the work queue fields. We may need to add + * more if the software at the other end needs them. + */ + work->hw_chksum = skb->csum; + work->len = skb->len; + work->ipprt = priv->port; + work->qos = priv->port & 0x7; + work->grp = pow_send_group; + work->tag_type = CVMX_HELPER_INPUT_TAG_TYPE; + work->tag = pow_send_group; /* FIXME */ + /* Default to zero. Sets of zero later are commented out */ + work->word2.u64 = 0; + work->word2.s.bufs = 1; + work->packet_ptr.u64 = 0; + work->packet_ptr.s.addr = cvmx_ptr_to_phys(copy_location); + work->packet_ptr.s.pool = CVMX_FPA_PACKET_POOL; + work->packet_ptr.s.size = CVMX_FPA_PACKET_POOL_SIZE; + work->packet_ptr.s.back = (copy_location - packet_buffer) >> 7; + + if (skb->protocol == htons(ETH_P_IP)) { + work->word2.s.ip_offset = 14; +#if 0 + work->word2.s.vlan_valid = 0; /* FIXME */ + work->word2.s.vlan_cfi = 0; /* FIXME */ + work->word2.s.vlan_id = 0; /* FIXME */ + work->word2.s.dec_ipcomp = 0; /* FIXME */ +#endif + work->word2.s.tcp_or_udp = + (ip_hdr(skb)->protocol == IP_PROTOCOL_TCP) + || (ip_hdr(skb)->protocol == IP_PROTOCOL_UDP); +#if 0 + /* FIXME */ + work->word2.s.dec_ipsec = 0; + /* We only support IPv4 right now */ + work->word2.s.is_v6 = 0; + /* Hardware would set to zero */ + work->word2.s.software = 0; + /* No error, packet is internal */ + work->word2.s.L4_error = 0; +#endif + work->word2.s.is_frag = !((ip_hdr(skb)->frag_off == 0) + || (ip_hdr(skb)->frag_off == + 1 << 14)); +#if 0 + /* Assume Linux is sending a good packet */ + work->word2.s.IP_exc = 0; +#endif + work->word2.s.is_bcast = (skb->pkt_type == PACKET_BROADCAST); + work->word2.s.is_mcast = (skb->pkt_type == PACKET_MULTICAST); +#if 0 + /* This is an IP packet */ + work->word2.s.not_IP = 0; + /* No error, packet is internal */ + work->word2.s.rcv_error = 0; + /* No error, packet is internal */ + work->word2.s.err_code = 0; +#endif + + /* + * When copying the data, include 4 bytes of the + * ethernet header to align the same way hardware + * does. + */ + memcpy(work->packet_data, skb->data + 10, + sizeof(work->packet_data)); + } else { +#if 0 + work->word2.snoip.vlan_valid = 0; /* FIXME */ + work->word2.snoip.vlan_cfi = 0; /* FIXME */ + work->word2.snoip.vlan_id = 0; /* FIXME */ + work->word2.snoip.software = 0; /* Hardware would set to zero */ +#endif + work->word2.snoip.is_rarp = skb->protocol == htons(ETH_P_RARP); + work->word2.snoip.is_arp = skb->protocol == htons(ETH_P_ARP); + work->word2.snoip.is_bcast = + (skb->pkt_type == PACKET_BROADCAST); + work->word2.snoip.is_mcast = + (skb->pkt_type == PACKET_MULTICAST); + work->word2.snoip.not_IP = 1; /* IP was done up above */ +#if 0 + /* No error, packet is internal */ + work->word2.snoip.rcv_error = 0; + /* No error, packet is internal */ + work->word2.snoip.err_code = 0; +#endif + memcpy(work->packet_data, skb->data, sizeof(work->packet_data)); + } + + /* Submit the packet to the POW */ + cvmx_pow_work_submit(work, work->tag, work->tag_type, work->qos, + work->grp); + priv->stats.tx_packets++; + priv->stats.tx_bytes += skb->len; + dev_kfree_skb(skb); + return 0; +} + +/** + * Transmit a work queue entry out of the ethernet port. Both + * the work queue entry and the packet data can optionally be + * freed. The work will be freed on error as well. + * + * @dev: Device to transmit out. + * @work_queue_entry: + * Work queue entry to send + * @do_free: True if the work queue entry and packet data should be + * freed. If false, neither will be freed. + * @qos: Index into the queues for this port to transmit on. This + * is used to implement QoS if their are multiple queues per + * port. This parameter must be between 0 and the number of + * queues per port minus 1. Values outside of this range will + * be change to zero. + * + * Returns Zero on success, negative on failure. + */ +int cvm_oct_transmit_qos(struct net_device *dev, void *work_queue_entry, + int do_free, int qos) +{ + unsigned long flags; + union cvmx_buf_ptr hw_buffer; + cvmx_pko_command_word0_t pko_command; + int dropped; + struct octeon_ethernet *priv = netdev_priv(dev); + cvmx_wqe_t *work = work_queue_entry; + + if (!(dev->flags & IFF_UP)) { + DEBUGPRINT("%s: Device not up\n", dev->name); + if (do_free) + cvm_oct_free_work(work); + return -1; + } + + /* The check on CVMX_PKO_QUEUES_PER_PORT_* is designed to completely + remove "qos" in the event neither interface supports + multiple queues per port */ + if ((CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 > 1) || + (CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 > 1)) { + if (qos <= 0) + qos = 0; + else if (qos >= cvmx_pko_get_num_queues(priv->port)) + qos = 0; + } else + qos = 0; + + /* Start off assuming no drop */ + dropped = 0; + + local_irq_save(flags); + cvmx_pko_send_packet_prepare(priv->port, priv->queue + qos, + CVMX_PKO_LOCK_CMD_QUEUE); + + /* Build the PKO buffer pointer */ + hw_buffer.u64 = 0; + hw_buffer.s.addr = work->packet_ptr.s.addr; + hw_buffer.s.pool = CVMX_FPA_PACKET_POOL; + hw_buffer.s.size = CVMX_FPA_PACKET_POOL_SIZE; + hw_buffer.s.back = work->packet_ptr.s.back; + + /* Build the PKO command */ + pko_command.u64 = 0; + pko_command.s.n2 = 1; /* Don't pollute L2 with the outgoing packet */ + pko_command.s.dontfree = !do_free; + pko_command.s.segs = work->word2.s.bufs; + pko_command.s.total_bytes = work->len; + + /* Check if we can use the hardware checksumming */ + if (unlikely(work->word2.s.not_IP || work->word2.s.IP_exc)) + pko_command.s.ipoffp1 = 0; + else + pko_command.s.ipoffp1 = sizeof(struct ethhdr) + 1; + + /* Send the packet to the output queue */ + if (unlikely + (cvmx_pko_send_packet_finish + (priv->port, priv->queue + qos, pko_command, hw_buffer, + CVMX_PKO_LOCK_CMD_QUEUE))) { + DEBUGPRINT("%s: Failed to send the packet\n", dev->name); + dropped = -1; + } + local_irq_restore(flags); + + if (unlikely(dropped)) { + if (do_free) + cvm_oct_free_work(work); + priv->stats.tx_dropped++; + } else if (do_free) + cvmx_fpa_free(work, CVMX_FPA_WQE_POOL, DONT_WRITEBACK(1)); + + return dropped; +} +EXPORT_SYMBOL(cvm_oct_transmit_qos); + +/** + * This function frees all skb that are currenty queued for TX. + * + * @dev: Device being shutdown + */ +void cvm_oct_tx_shutdown(struct net_device *dev) +{ + struct octeon_ethernet *priv = netdev_priv(dev); + unsigned long flags; + int qos; + + for (qos = 0; qos < 16; qos++) { + spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags); + while (skb_queue_len(&priv->tx_free_list[qos])) + dev_kfree_skb_any(__skb_dequeue + (&priv->tx_free_list[qos])); + spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, flags); + } +} |