1 files changed, 804 insertions, 0 deletions

diff --git a/drivers/staging/cx25821/cx25821-audio-upstream.c b/drivers/staging/cx25821/cx25821-audio-upstream.c
new file mode 100644
index 000000000000..ddddf651266b
--- /dev/null
+++ b/drivers/staging/cx25821/cx25821-audio-upstream.c
@@ -0,0 +1,804 @@
+/*
+ *  Driver for the Conexant CX25821 PCIe bridge
+ *
+ *  Copyright (C) 2009 Conexant Systems Inc.
+ *  Authors  <hiep.huynh@conexant.com>, <shu.lin@conexant.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "cx25821-video.h"
+#include "cx25821-audio-upstream.h"
+
+#include <linux/fs.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/syscalls.h>
+#include <linux/file.h>
+#include <linux/fcntl.h>
+#include <linux/delay.h>
+#include <asm/uaccess.h>
+
+MODULE_DESCRIPTION("v4l2 driver module for cx25821 based TV cards");
+MODULE_AUTHOR("Hiep Huynh <hiep.huynh@conexant.com>");
+MODULE_LICENSE("GPL");
+
+static int _intr_msk =
+    FLD_AUD_SRC_RISCI1 | FLD_AUD_SRC_OF | FLD_AUD_SRC_SYNC |
+    FLD_AUD_SRC_OPC_ERR;
+
+int cx25821_sram_channel_setup_upstream_audio(struct cx25821_dev *dev,
+					      struct sram_channel *ch,
+					      unsigned int bpl, u32 risc)
+{
+	unsigned int i, lines;
+	u32 cdt;
+
+	if (ch->cmds_start == 0) {
+		cx_write(ch->ptr1_reg, 0);
+		cx_write(ch->ptr2_reg, 0);
+		cx_write(ch->cnt2_reg, 0);
+		cx_write(ch->cnt1_reg, 0);
+		return 0;
+	}
+
+	bpl = (bpl + 7) & ~7;	/* alignment */
+	cdt = ch->cdt;
+	lines = ch->fifo_size / bpl;
+
+	if (lines > 3) {
+		lines = 3;
+	}
+
+	BUG_ON(lines < 2);
+
+	/* write CDT */
+	for (i = 0; i < lines; i++) {
+		cx_write(cdt + 16 * i, ch->fifo_start + bpl * i);
+		cx_write(cdt + 16 * i + 4, 0);
+		cx_write(cdt + 16 * i + 8, 0);
+		cx_write(cdt + 16 * i + 12, 0);
+	}
+
+	/* write CMDS */
+	cx_write(ch->cmds_start + 0, risc);
+
+	cx_write(ch->cmds_start + 4, 0);
+	cx_write(ch->cmds_start + 8, cdt);
+	cx_write(ch->cmds_start + 12, AUDIO_CDT_SIZE_QW);
+	cx_write(ch->cmds_start + 16, ch->ctrl_start);
+
+	//IQ size
+	cx_write(ch->cmds_start + 20, AUDIO_IQ_SIZE_DW);
+
+	for (i = 24; i < 80; i += 4)
+		cx_write(ch->cmds_start + i, 0);
+
+	/* fill registers */
+	cx_write(ch->ptr1_reg, ch->fifo_start);
+	cx_write(ch->ptr2_reg, cdt);
+	cx_write(ch->cnt2_reg, AUDIO_CDT_SIZE_QW);
+	cx_write(ch->cnt1_reg, AUDIO_CLUSTER_SIZE_QW - 1);
+
+	return 0;
+}
+
+static __le32 *cx25821_risc_field_upstream_audio(struct cx25821_dev *dev,
+						 __le32 * rp,
+						 dma_addr_t databuf_phys_addr,
+						 unsigned int bpl,
+						 int fifo_enable)
+{
+	unsigned int line;
+	struct sram_channel *sram_ch =
+	    &dev->sram_channels[dev->_audio_upstream_channel_select];
+	int offset = 0;
+
+	/* scan lines */
+	for (line = 0; line < LINES_PER_AUDIO_BUFFER; line++) {
+		*(rp++) = cpu_to_le32(RISC_READ | RISC_SOL | RISC_EOL | bpl);
+		*(rp++) = cpu_to_le32(databuf_phys_addr + offset);
+		*(rp++) = cpu_to_le32(0);	/* bits 63-32 */
+
+		// Check if we need to enable the FIFO after the first 3 lines
+		// For the upstream audio channel, the risc engine will enable the FIFO.
+		if (fifo_enable && line == 2) {
+			*(rp++) = RISC_WRITECR;
+			*(rp++) = sram_ch->dma_ctl;
+			*(rp++) = sram_ch->fld_aud_fifo_en;
+			*(rp++) = 0x00000020;
+		}
+
+		offset += AUDIO_LINE_SIZE;
+	}
+
+	return rp;
+}
+
+int cx25821_risc_buffer_upstream_audio(struct cx25821_dev *dev,
+				       struct pci_dev *pci,
+				       unsigned int bpl, unsigned int lines)
+{
+	__le32 *rp;
+	int fifo_enable = 0;
+	int frame = 0, i = 0;
+	int frame_size = AUDIO_DATA_BUF_SZ;
+	int databuf_offset = 0;
+	int risc_flag = RISC_CNT_INC;
+	dma_addr_t risc_phys_jump_addr;
+
+	/* Virtual address of Risc buffer program */
+	rp = dev->_risc_virt_addr;
+
+	/* sync instruction */
+	*(rp++) = cpu_to_le32(RISC_RESYNC | AUDIO_SYNC_LINE);
+
+	for (frame = 0; frame < NUM_AUDIO_FRAMES; frame++) {
+		databuf_offset = frame_size * frame;
+
+		if (frame == 0) {
+			fifo_enable = 1;
+			risc_flag = RISC_CNT_RESET;
+		} else {
+			fifo_enable = 0;
+			risc_flag = RISC_CNT_INC;
+		}
+
+		//Calculate physical jump address
+		if ((frame + 1) == NUM_AUDIO_FRAMES) {
+			risc_phys_jump_addr =
+			    dev->_risc_phys_start_addr +
+			    RISC_SYNC_INSTRUCTION_SIZE;
+		} else {
+			risc_phys_jump_addr =
+			    dev->_risc_phys_start_addr +
+			    RISC_SYNC_INSTRUCTION_SIZE +
+			    AUDIO_RISC_DMA_BUF_SIZE * (frame + 1);
+		}
+
+		rp = cx25821_risc_field_upstream_audio(dev, rp,
+						       dev->
+						       _audiodata_buf_phys_addr
+						       + databuf_offset, bpl,
+						       fifo_enable);
+
+		if (USE_RISC_NOOP_AUDIO) {
+			for (i = 0; i < NUM_NO_OPS; i++) {
+				*(rp++) = cpu_to_le32(RISC_NOOP);
+			}
+		}
+
+		// Loop to (Nth)FrameRISC or to Start of Risc program & generate IRQ
+		*(rp++) = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | risc_flag);
+		*(rp++) = cpu_to_le32(risc_phys_jump_addr);
+		*(rp++) = cpu_to_le32(0);
+
+		//Recalculate virtual address based on frame index
+		rp = dev->_risc_virt_addr + RISC_SYNC_INSTRUCTION_SIZE / 4 +
+		    (AUDIO_RISC_DMA_BUF_SIZE * (frame + 1) / 4);
+	}
+
+	return 0;
+}
+
+void cx25821_free_memory_audio(struct cx25821_dev *dev)
+{
+	if (dev->_risc_virt_addr) {
+		pci_free_consistent(dev->pci, dev->_audiorisc_size,
+				    dev->_risc_virt_addr, dev->_risc_phys_addr);
+		dev->_risc_virt_addr = NULL;
+	}
+
+	if (dev->_audiodata_buf_virt_addr) {
+		pci_free_consistent(dev->pci, dev->_audiodata_buf_size,
+				    dev->_audiodata_buf_virt_addr,
+				    dev->_audiodata_buf_phys_addr);
+		dev->_audiodata_buf_virt_addr = NULL;
+	}
+}
+
+void cx25821_stop_upstream_audio(struct cx25821_dev *dev)
+{
+	struct sram_channel *sram_ch =
+	    &dev->sram_channels[AUDIO_UPSTREAM_SRAM_CHANNEL_B];
+	u32 tmp = 0;
+
+	if (!dev->_audio_is_running) {
+		printk
+		    ("cx25821: No audio file is currently running so return!\n");
+		return;
+	}
+	//Disable RISC interrupts
+	cx_write(sram_ch->int_msk, 0);
+
+	//Turn OFF risc and fifo enable in AUD_DMA_CNTRL
+	tmp = cx_read(sram_ch->dma_ctl);
+	cx_write(sram_ch->dma_ctl,
+		 tmp & ~(sram_ch->fld_aud_fifo_en | sram_ch->fld_aud_risc_en));
+
+	//Clear data buffer memory
+	if (dev->_audiodata_buf_virt_addr)
+		memset(dev->_audiodata_buf_virt_addr, 0,
+		       dev->_audiodata_buf_size);
+
+	dev->_audio_is_running = 0;
+	dev->_is_first_audio_frame = 0;
+	dev->_audioframe_count = 0;
+	dev->_audiofile_status = END_OF_FILE;
+
+	if (dev->_irq_audio_queues) {
+		kfree(dev->_irq_audio_queues);
+		dev->_irq_audio_queues = NULL;
+	}
+
+	if (dev->_audiofilename != NULL)
+		kfree(dev->_audiofilename);
+}
+
+void cx25821_free_mem_upstream_audio(struct cx25821_dev *dev)
+{
+	if (dev->_audio_is_running) {
+		cx25821_stop_upstream_audio(dev);
+	}
+
+	cx25821_free_memory_audio(dev);
+}
+
+int cx25821_get_audio_data(struct cx25821_dev *dev,
+			   struct sram_channel *sram_ch)
+{
+	struct file *myfile;
+	int frame_index_temp = dev->_audioframe_index;
+	int i = 0;
+	int line_size = AUDIO_LINE_SIZE;
+	int frame_size = AUDIO_DATA_BUF_SZ;
+	int frame_offset = frame_size * frame_index_temp;
+	ssize_t vfs_read_retval = 0;
+	char mybuf[line_size];
+	loff_t file_offset = dev->_audioframe_count * frame_size;
+	loff_t pos;
+	mm_segment_t old_fs;
+
+	if (dev->_audiofile_status == END_OF_FILE)
+		return 0;
+
+	myfile = filp_open(dev->_audiofilename, O_RDONLY | O_LARGEFILE, 0);
+
+	if (IS_ERR(myfile)) {
+		const int open_errno = -PTR_ERR(myfile);
+		printk("%s(): ERROR opening file(%s) with errno = %d! \n",
+		       __func__, dev->_audiofilename, open_errno);
+		return PTR_ERR(myfile);
+	} else {
+		if (!(myfile->f_op)) {
+			printk("%s: File has no file operations registered!\n",
+			       __func__);
+			filp_close(myfile, NULL);
+			return -EIO;
+		}
+
+		if (!myfile->f_op->read) {
+			printk("%s: File has no READ operations registered! \n",
+			       __func__);
+			filp_close(myfile, NULL);
+			return -EIO;
+		}
+
+		pos = myfile->f_pos;
+		old_fs = get_fs();
+		set_fs(KERNEL_DS);
+
+		for (i = 0; i < dev->_audio_lines_count; i++) {
+			pos = file_offset;
+
+			vfs_read_retval =
+			    vfs_read(myfile, mybuf, line_size, &pos);
+
+			if (vfs_read_retval > 0 && vfs_read_retval == line_size
+			    && dev->_audiodata_buf_virt_addr != NULL) {
+				memcpy((void *)(dev->_audiodata_buf_virt_addr +
+						frame_offset / 4), mybuf,
+				       vfs_read_retval);
+			}
+
+			file_offset += vfs_read_retval;
+			frame_offset += vfs_read_retval;
+
+			if (vfs_read_retval < line_size) {
+				printk(KERN_INFO
+				       "Done: exit %s() since no more bytes to read from Audio file.\n",
+				       __func__);
+				break;
+			}
+		}
+
+		if (i > 0)
+			dev->_audioframe_count++;
+
+		dev->_audiofile_status =
+		    (vfs_read_retval == line_size) ? IN_PROGRESS : END_OF_FILE;
+
+		set_fs(old_fs);
+		filp_close(myfile, NULL);
+	}
+
+	return 0;
+}
+
+static void cx25821_audioups_handler(struct work_struct *work)
+{
+	struct cx25821_dev *dev =
+	    container_of(work, struct cx25821_dev, _audio_work_entry);
+
+	if (!dev) {
+		printk("ERROR %s(): since container_of(work_struct) FAILED! \n",
+		       __func__);
+		return;
+	}
+
+	cx25821_get_audio_data(dev,
+			       &dev->sram_channels[dev->
+						   _audio_upstream_channel_select]);
+}
+
+int cx25821_openfile_audio(struct cx25821_dev *dev,
+			   struct sram_channel *sram_ch)
+{
+	struct file *myfile;
+	int i = 0, j = 0;
+	int line_size = AUDIO_LINE_SIZE;
+	ssize_t vfs_read_retval = 0;
+	char mybuf[line_size];
+	loff_t pos;
+	loff_t offset = (unsigned long)0;
+	mm_segment_t old_fs;
+
+	myfile = filp_open(dev->_audiofilename, O_RDONLY | O_LARGEFILE, 0);
+
+	if (IS_ERR(myfile)) {
+		const int open_errno = -PTR_ERR(myfile);
+		printk("%s(): ERROR opening file(%s) with errno = %d! \n",
+		       __func__, dev->_audiofilename, open_errno);
+		return PTR_ERR(myfile);
+	} else {
+		if (!(myfile->f_op)) {
+			printk("%s: File has no file operations registered! \n",
+			       __func__);
+			filp_close(myfile, NULL);
+			return -EIO;
+		}
+
+		if (!myfile->f_op->read) {
+			printk("%s: File has no READ operations registered! \n",
+			       __func__);
+			filp_close(myfile, NULL);
+			return -EIO;
+		}
+
+		pos = myfile->f_pos;
+		old_fs = get_fs();
+		set_fs(KERNEL_DS);
+
+		for (j = 0; j < NUM_AUDIO_FRAMES; j++) {
+			for (i = 0; i < dev->_audio_lines_count; i++) {
+				pos = offset;
+
+				vfs_read_retval =
+				    vfs_read(myfile, mybuf, line_size, &pos);
+
+				if (vfs_read_retval > 0
+				    && vfs_read_retval == line_size
+				    && dev->_audiodata_buf_virt_addr != NULL) {
+					memcpy((void *)(dev->
+							_audiodata_buf_virt_addr
+							+ offset / 4), mybuf,
+					       vfs_read_retval);
+				}
+
+				offset += vfs_read_retval;
+
+				if (vfs_read_retval < line_size) {
+					printk(KERN_INFO
+					       "Done: exit %s() since no more bytes to read from Audio file.\n",
+					       __func__);
+					break;
+				}
+			}
+
+			if (i > 0) {
+				dev->_audioframe_count++;
+			}
+
+			if (vfs_read_retval < line_size) {
+				break;
+			}
+		}
+
+		dev->_audiofile_status =
+		    (vfs_read_retval == line_size) ? IN_PROGRESS : END_OF_FILE;
+
+		set_fs(old_fs);
+		myfile->f_pos = 0;
+		filp_close(myfile, NULL);
+	}
+
+	return 0;
+}
+
+static int cx25821_audio_upstream_buffer_prepare(struct cx25821_dev *dev,
+						 struct sram_channel *sram_ch,
+						 int bpl)
+{
+	int ret = 0;
+	dma_addr_t dma_addr;
+	dma_addr_t data_dma_addr;
+
+	cx25821_free_memory_audio(dev);
+
+	dev->_risc_virt_addr =
+	    pci_alloc_consistent(dev->pci, dev->audio_upstream_riscbuf_size,
+				 &dma_addr);
+	dev->_risc_virt_start_addr = dev->_risc_virt_addr;
+	dev->_risc_phys_start_addr = dma_addr;
+	dev->_risc_phys_addr = dma_addr;
+	dev->_audiorisc_size = dev->audio_upstream_riscbuf_size;
+
+	if (!dev->_risc_virt_addr) {
+		printk
+		    ("cx25821 ERROR: pci_alloc_consistent() FAILED to allocate memory for RISC program! Returning.\n");
+		return -ENOMEM;
+	}
+	//Clear out memory at address
+	memset(dev->_risc_virt_addr, 0, dev->_audiorisc_size);
+
+	//For Audio Data buffer allocation
+	dev->_audiodata_buf_virt_addr =
+	    pci_alloc_consistent(dev->pci, dev->audio_upstream_databuf_size,
+				 &data_dma_addr);
+	dev->_audiodata_buf_phys_addr = data_dma_addr;
+	dev->_audiodata_buf_size = dev->audio_upstream_databuf_size;
+
+	if (!dev->_audiodata_buf_virt_addr) {
+		printk
+		    ("cx25821 ERROR: pci_alloc_consistent() FAILED to allocate memory for data buffer! Returning. \n");
+		return -ENOMEM;
+	}
+	//Clear out memory at address
+	memset(dev->_audiodata_buf_virt_addr, 0, dev->_audiodata_buf_size);
+
+	ret = cx25821_openfile_audio(dev, sram_ch);
+	if (ret < 0)
+		return ret;
+
+	//Creating RISC programs
+	ret =
+	    cx25821_risc_buffer_upstream_audio(dev, dev->pci, bpl,
+					       dev->_audio_lines_count);
+	if (ret < 0) {
+		printk(KERN_DEBUG
+		       "cx25821 ERROR creating audio upstream RISC programs! \n");
+		goto error;
+	}
+
+	return 0;
+
+      error:
+	return ret;
+}
+
+int cx25821_audio_upstream_irq(struct cx25821_dev *dev, int chan_num,
+			       u32 status)
+{
+	int i = 0;
+	u32 int_msk_tmp;
+	struct sram_channel *channel = &dev->sram_channels[chan_num];
+	dma_addr_t risc_phys_jump_addr;
+	__le32 *rp;
+
+	if (status & FLD_AUD_SRC_RISCI1) {
+		//Get interrupt_index of the program that interrupted
+		u32 prog_cnt = cx_read(channel->gpcnt);
+
+		//Since we've identified our IRQ, clear our bits from the interrupt mask and interrupt status registers
+		cx_write(channel->int_msk, 0);
+		cx_write(channel->int_stat, cx_read(channel->int_stat));
+
+		spin_lock(&dev->slock);
+
+		while (prog_cnt != dev->_last_index_irq) {
+			//Update _last_index_irq
+			if (dev->_last_index_irq < (NUMBER_OF_PROGRAMS - 1)) {
+				dev->_last_index_irq++;
+			} else {
+				dev->_last_index_irq = 0;
+			}
+
+			dev->_audioframe_index = dev->_last_index_irq;
+
+			queue_work(dev->_irq_audio_queues,
+				   &dev->_audio_work_entry);
+		}
+
+		if (dev->_is_first_audio_frame) {
+			dev->_is_first_audio_frame = 0;
+
+			if (dev->_risc_virt_start_addr != NULL) {
+				risc_phys_jump_addr =
+				    dev->_risc_phys_start_addr +
+				    RISC_SYNC_INSTRUCTION_SIZE +
+				    AUDIO_RISC_DMA_BUF_SIZE;
+
+				rp = cx25821_risc_field_upstream_audio(dev,
+								       dev->
+								       _risc_virt_start_addr
+								       + 1,
+								       dev->
+								       _audiodata_buf_phys_addr,
+								       AUDIO_LINE_SIZE,
+								       FIFO_DISABLE);
+
+				if (USE_RISC_NOOP_AUDIO) {
+					for (i = 0; i < NUM_NO_OPS; i++) {
+						*(rp++) =
+						    cpu_to_le32(RISC_NOOP);
+					}
+				}
+				// Jump to 2nd Audio Frame
+				*(rp++) =
+				    cpu_to_le32(RISC_JUMP | RISC_IRQ1 |
+						RISC_CNT_RESET);
+				*(rp++) = cpu_to_le32(risc_phys_jump_addr);
+				*(rp++) = cpu_to_le32(0);
+			}
+		}
+
+		spin_unlock(&dev->slock);
+	} else {
+		if (status & FLD_AUD_SRC_OF)
+			printk("%s: Audio Received Overflow Error Interrupt!\n",
+			       __func__);
+
+		if (status & FLD_AUD_SRC_SYNC)
+			printk("%s: Audio Received Sync Error Interrupt!\n",
+			       __func__);
+
+		if (status & FLD_AUD_SRC_OPC_ERR)
+			printk("%s: Audio Received OpCode Error Interrupt!\n",
+			       __func__);
+
+		// Read and write back the interrupt status register to clear our bits
+		cx_write(channel->int_stat, cx_read(channel->int_stat));
+	}
+
+	if (dev->_audiofile_status == END_OF_FILE) {
+		printk("cx25821: EOF Channel Audio Framecount = %d\n",
+		       dev->_audioframe_count);
+		return -1;
+	}
+	//ElSE, set the interrupt mask register, re-enable irq.
+	int_msk_tmp = cx_read(channel->int_msk);
+	cx_write(channel->int_msk, int_msk_tmp |= _intr_msk);
+
+	return 0;
+}
+
+static irqreturn_t cx25821_upstream_irq_audio(int irq, void *dev_id)
+{
+	struct cx25821_dev *dev = dev_id;
+	u32 msk_stat, audio_status;
+	int handled = 0;
+	struct sram_channel *sram_ch;
+
+	if (!dev)
+		return -1;
+
+	sram_ch = &dev->sram_channels[dev->_audio_upstream_channel_select];
+
+	msk_stat = cx_read(sram_ch->int_mstat);
+	audio_status = cx_read(sram_ch->int_stat);
+
+	// Only deal with our interrupt
+	if (audio_status) {
+		handled =
+		    cx25821_audio_upstream_irq(dev,
+					       dev->
+					       _audio_upstream_channel_select,
+					       audio_status);
+	}
+
+	if (handled < 0) {
+		cx25821_stop_upstream_audio(dev);
+	} else {
+		handled += handled;
+	}
+
+	return IRQ_RETVAL(handled);
+}
+
+static void cx25821_wait_fifo_enable(struct cx25821_dev *dev,
+				     struct sram_channel *sram_ch)
+{
+	int count = 0;
+	u32 tmp;
+
+	do {
+		//Wait 10 microsecond before checking to see if the FIFO is turned ON.
+		udelay(10);
+
+		tmp = cx_read(sram_ch->dma_ctl);
+
+		if (count++ > 1000)	//10 millisecond timeout
+		{
+			printk
+			    ("cx25821 ERROR: %s() fifo is NOT turned on. Timeout!\n",
+			     __func__);
+			return;
+		}
+
+	} while (!(tmp & sram_ch->fld_aud_fifo_en));
+
+}
+
+int cx25821_start_audio_dma_upstream(struct cx25821_dev *dev,
+				     struct sram_channel *sram_ch)
+{
+	u32 tmp = 0;
+	int err = 0;
+
+	// Set the physical start address of the RISC program in the initial program counter(IPC) member of the CMDS.
+	cx_write(sram_ch->cmds_start + 0, dev->_risc_phys_addr);
+	cx_write(sram_ch->cmds_start + 4, 0);	/* Risc IPC High 64 bits 63-32 */
+
+	/* reset counter */
+	cx_write(sram_ch->gpcnt_ctl, 3);
+
+	//Set the line length       (It looks like we do not need to set the line length)
+	cx_write(sram_ch->aud_length, AUDIO_LINE_SIZE & FLD_AUD_DST_LN_LNGTH);
+
+	//Set the input mode to 16-bit
+	tmp = cx_read(sram_ch->aud_cfg);
+	tmp |=
+	    FLD_AUD_SRC_ENABLE | FLD_AUD_DST_PK_MODE | FLD_AUD_CLK_ENABLE |
+	    FLD_AUD_MASTER_MODE | FLD_AUD_CLK_SELECT_PLL_D | FLD_AUD_SONY_MODE;
+	cx_write(sram_ch->aud_cfg, tmp);
+
+	// Read and write back the interrupt status register to clear it
+	tmp = cx_read(sram_ch->int_stat);
+	cx_write(sram_ch->int_stat, tmp);
+
+	// Clear our bits from the interrupt status register.
+	cx_write(sram_ch->int_stat, _intr_msk);
+
+	//Set the interrupt mask register, enable irq.
+	cx_set(PCI_INT_MSK, cx_read(PCI_INT_MSK) | (1 << sram_ch->irq_bit));
+	tmp = cx_read(sram_ch->int_msk);
+	cx_write(sram_ch->int_msk, tmp |= _intr_msk);
+
+	err =
+	    request_irq(dev->pci->irq, cx25821_upstream_irq_audio,
+			IRQF_SHARED | IRQF_DISABLED, dev->name, dev);
+	if (err < 0) {
+		printk(KERN_ERR "%s: can't get upstream IRQ %d\n", dev->name,
+		       dev->pci->irq);
+		goto fail_irq;
+	}
+
+	// Start the DMA  engine
+	tmp = cx_read(sram_ch->dma_ctl);
+	cx_set(sram_ch->dma_ctl, tmp | sram_ch->fld_aud_risc_en);
+
+	dev->_audio_is_running = 1;
+	dev->_is_first_audio_frame = 1;
+
+	// The fifo_en bit turns on by the first Risc program
+	cx25821_wait_fifo_enable(dev, sram_ch);
+
+	return 0;
+
+      fail_irq:
+	cx25821_dev_unregister(dev);
+	return err;
+}
+
+int cx25821_audio_upstream_init(struct cx25821_dev *dev, int channel_select)
+{
+	struct sram_channel *sram_ch;
+	int retval = 0;
+	int err = 0;
+	int str_length = 0;
+
+	if (dev->_audio_is_running) {
+		printk("Audio Channel is still running so return!\n");
+		return 0;
+	}
+
+	dev->_audio_upstream_channel_select = channel_select;
+	sram_ch = &dev->sram_channels[channel_select];
+
+	//Work queue
+	INIT_WORK(&dev->_audio_work_entry, cx25821_audioups_handler);
+	dev->_irq_audio_queues =
+	    create_singlethread_workqueue("cx25821_audioworkqueue");
+
+	if (!dev->_irq_audio_queues) {
+		printk
+		    ("cx25821 ERROR: create_singlethread_workqueue() for Audio FAILED!\n");
+		return -ENOMEM;
+	}
+
+	dev->_last_index_irq = 0;
+	dev->_audio_is_running = 0;
+	dev->_audioframe_count = 0;
+	dev->_audiofile_status = RESET_STATUS;
+	dev->_audio_lines_count = LINES_PER_AUDIO_BUFFER;
+	_line_size = AUDIO_LINE_SIZE;
+
+	if (dev->input_audiofilename) {
+		str_length = strlen(dev->input_audiofilename);
+		dev->_audiofilename =
+		    (char *)kmalloc(str_length + 1, GFP_KERNEL);
+
+		if (!dev->_audiofilename)
+			goto error;
+
+		memcpy(dev->_audiofilename, dev->input_audiofilename,
+		       str_length + 1);
+
+		//Default if filename is empty string
+		if (strcmp(dev->input_audiofilename, "") == 0) {
+			dev->_audiofilename = "/root/audioGOOD.wav";
+		}
+	} else {
+		str_length = strlen(_defaultAudioName);
+		dev->_audiofilename =
+		    (char *)kmalloc(str_length + 1, GFP_KERNEL);
+
+		if (!dev->_audiofilename)
+			goto error;
+
+		memcpy(dev->_audiofilename, _defaultAudioName, str_length + 1);
+	}
+
+	retval =
+	    cx25821_sram_channel_setup_upstream_audio(dev, sram_ch, _line_size,
+						      0);
+
+	dev->audio_upstream_riscbuf_size =
+	    AUDIO_RISC_DMA_BUF_SIZE * NUM_AUDIO_PROGS +
+	    RISC_SYNC_INSTRUCTION_SIZE;
+	dev->audio_upstream_databuf_size = AUDIO_DATA_BUF_SZ * NUM_AUDIO_PROGS;
+
+	//Allocating buffers and prepare RISC program
+	retval =
+	    cx25821_audio_upstream_buffer_prepare(dev, sram_ch, _line_size);
+	if (retval < 0) {
+		printk(KERN_ERR
+		       "%s: Failed to set up Audio upstream buffers!\n",
+		       dev->name);
+		goto error;
+	}
+	//Start RISC engine
+	cx25821_start_audio_dma_upstream(dev, sram_ch);
+
+	return 0;
+
+      error:
+	cx25821_dev_unregister(dev);
+
+	return err;
+}