diff options
Diffstat (limited to 'drivers/pwm/pwm-iqs620a.c')
| -rw-r--r-- | drivers/pwm/pwm-iqs620a.c | 15 |
1 files changed, 8 insertions, 7 deletions
diff --git a/drivers/pwm/pwm-iqs620a.c b/drivers/pwm/pwm-iqs620a.c index 674f0e238ba0..7d33e3646436 100644 --- a/drivers/pwm/pwm-iqs620a.c +++ b/drivers/pwm/pwm-iqs620a.c @@ -25,10 +25,10 @@ #include <linux/regmap.h> #include <linux/slab.h> -#define IQS620_PWR_SETTINGS 0xD2 +#define IQS620_PWR_SETTINGS 0xd2 #define IQS620_PWR_SETTINGS_PWM_OUT BIT(7) -#define IQS620_PWM_DUTY_CYCLE 0xD8 +#define IQS620_PWM_DUTY_CYCLE 0xd8 #define IQS620_PWM_PERIOD_NS 1000000 @@ -46,7 +46,8 @@ static int iqs620_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, { struct iqs620_pwm_private *iqs620_pwm; struct iqs62x_core *iqs62x; - int duty_scale, ret; + u64 duty_scale; + int ret; if (state->polarity != PWM_POLARITY_NORMAL) return -ENOTSUPP; @@ -69,7 +70,7 @@ static int iqs620_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, * For lower duty cycles (e.g. 0), the PWM output is simply disabled to * allow an external pull-down resistor to hold the GPIO3/LTX pin low. */ - duty_scale = state->duty_cycle * 256 / IQS620_PWM_PERIOD_NS; + duty_scale = div_u64(state->duty_cycle * 256, IQS620_PWM_PERIOD_NS); mutex_lock(&iqs620_pwm->lock); @@ -81,7 +82,7 @@ static int iqs620_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, } if (duty_scale) { - u8 duty_val = min(duty_scale - 1, 0xFF); + u8 duty_val = min_t(u64, duty_scale - 1, 0xff); ret = regmap_write(iqs62x->regmap, IQS620_PWM_DUTY_CYCLE, duty_val); @@ -93,7 +94,7 @@ static int iqs620_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, if (state->enabled && duty_scale) { ret = regmap_update_bits(iqs62x->regmap, IQS620_PWR_SETTINGS, - IQS620_PWR_SETTINGS_PWM_OUT, 0xFF); + IQS620_PWR_SETTINGS_PWM_OUT, 0xff); if (ret) goto err_mutex; } @@ -159,7 +160,7 @@ static int iqs620_pwm_notifier(struct notifier_block *notifier, ret = regmap_update_bits(iqs62x->regmap, IQS620_PWR_SETTINGS, IQS620_PWR_SETTINGS_PWM_OUT, - iqs620_pwm->out_en ? 0xFF : 0); + iqs620_pwm->out_en ? 0xff : 0); err_mutex: mutex_unlock(&iqs620_pwm->lock); |